From: Mikko Perttunen <mperttunen@nvidia.com> To: thierry.reding@gmail.com, jonathanh@nvidia.com, digetx@gmail.com, airlied@linux.ie, daniel@ffwll.ch Cc: linux-tegra@vger.kernel.org, dri-devel@lists.freedesktop.org, talho@nvidia.com, bhuntsman@nvidia.com, Mikko Perttunen <mperttunen@nvidia.com> Subject: [PATCH v3 00/20] Host1x/TegraDRM UAPI Date: Wed, 7 Oct 2020 20:12:18 +0300 [thread overview] Message-ID: <20201007171238.1795964-1-mperttunen@nvidia.com> (raw) Hi all, here's the third revision of the Host1x/TegraDRM UAPI proposal. The open issues from RFCv2 should be resolved now, so I'm dropping the RFC tag. The series is still only tested with Tegra186 so I'm hoping for people with devices with other chips to test this out. The test suite[1] has been updated for the changes in this revision, and also includes tests for the newly added DMA reservation support. If there are no further issues with the UAPI definition, I'll look at porting other userspace next - hoping for some help with that as well since most of it is for chips I don't have easy access to. The series can be also found in https://github.com/cyndis/linux/commits/work/host1x-uapi-v3. Older versions: v1: https://www.spinics.net/lists/linux-tegra/msg51000.html v2: https://www.spinics.net/lists/linux-tegra/msg53061.html Thank you, Mikko [1] https://github.com/cyndis/uapi-test Mikko Perttunen (20): gpu: host1x: Use different lock classes for each client gpu: host1x: Allow syncpoints without associated client gpu: host1x: Show number of pending waiters in debugfs gpu: host1x: Remove cancelled waiters immediately gpu: host1x: Use HW-equivalent syncpoint expiration check gpu: host1x: Cleanup and refcounting for syncpoints gpu: host1x: Introduce UAPI header gpu: host1x: Implement /dev/host1x device node gpu: host1x: DMA fences and userspace fence creation gpu: host1x: Add no-recovery mode gpu: host1x: Add job release callback gpu: host1x: Add support for syncpoint waits in CDMA pushbuffer gpu: host1x: Reset max value when freeing a syncpoint gpu: host1x: Reserve VBLANK syncpoints at initialization drm/tegra: Add new UAPI to header drm/tegra: Boot VIC during runtime PM resume drm/tegra: Set resv fields when importing/exporting GEMs drm/tegra: Allocate per-engine channel in core code drm/tegra: Implement new UAPI drm/tegra: Add job firewall drivers/gpu/drm/tegra/Makefile | 4 + drivers/gpu/drm/tegra/dc.c | 10 +- drivers/gpu/drm/tegra/drm.c | 75 ++- drivers/gpu/drm/tegra/drm.h | 9 + drivers/gpu/drm/tegra/gem.c | 2 + drivers/gpu/drm/tegra/gr2d.c | 4 +- drivers/gpu/drm/tegra/gr3d.c | 4 +- drivers/gpu/drm/tegra/uapi.h | 63 +++ drivers/gpu/drm/tegra/uapi/firewall.c | 197 +++++++ drivers/gpu/drm/tegra/uapi/gather_bo.c | 86 ++++ drivers/gpu/drm/tegra/uapi/gather_bo.h | 22 + drivers/gpu/drm/tegra/uapi/submit.c | 679 +++++++++++++++++++++++++ drivers/gpu/drm/tegra/uapi/submit.h | 20 + drivers/gpu/drm/tegra/uapi/uapi.c | 326 ++++++++++++ drivers/gpu/drm/tegra/vic.c | 118 ++--- drivers/gpu/host1x/Makefile | 2 + drivers/gpu/host1x/bus.c | 7 +- drivers/gpu/host1x/cdma.c | 69 ++- drivers/gpu/host1x/debug.c | 14 +- drivers/gpu/host1x/dev.c | 15 + drivers/gpu/host1x/dev.h | 16 +- drivers/gpu/host1x/fence.c | 207 ++++++++ drivers/gpu/host1x/fence.h | 13 + drivers/gpu/host1x/hw/cdma_hw.c | 2 +- drivers/gpu/host1x/hw/channel_hw.c | 63 ++- drivers/gpu/host1x/hw/debug_hw.c | 11 +- drivers/gpu/host1x/intr.c | 23 +- drivers/gpu/host1x/intr.h | 2 + drivers/gpu/host1x/job.c | 79 ++- drivers/gpu/host1x/job.h | 14 + drivers/gpu/host1x/syncpt.c | 185 ++++--- drivers/gpu/host1x/syncpt.h | 16 +- drivers/gpu/host1x/uapi.c | 382 ++++++++++++++ drivers/gpu/host1x/uapi.h | 22 + include/linux/host1x.h | 47 +- include/uapi/drm/tegra_drm.h | 420 ++++++++++++++- include/uapi/linux/host1x.h | 134 +++++ 37 files changed, 3076 insertions(+), 286 deletions(-) create mode 100644 drivers/gpu/drm/tegra/uapi.h create mode 100644 drivers/gpu/drm/tegra/uapi/firewall.c create mode 100644 drivers/gpu/drm/tegra/uapi/gather_bo.c create mode 100644 drivers/gpu/drm/tegra/uapi/gather_bo.h create mode 100644 drivers/gpu/drm/tegra/uapi/submit.c create mode 100644 drivers/gpu/drm/tegra/uapi/submit.h create mode 100644 drivers/gpu/drm/tegra/uapi/uapi.c create mode 100644 drivers/gpu/host1x/fence.c create mode 100644 drivers/gpu/host1x/fence.h create mode 100644 drivers/gpu/host1x/uapi.c create mode 100644 drivers/gpu/host1x/uapi.h create mode 100644 include/uapi/linux/host1x.h -- 2.28.0
WARNING: multiple messages have this Message-ID (diff)
From: Mikko Perttunen <mperttunen@nvidia.com> To: thierry.reding@gmail.com, jonathanh@nvidia.com, digetx@gmail.com, airlied@linux.ie, daniel@ffwll.ch Cc: linux-tegra@vger.kernel.org, talho@nvidia.com, bhuntsman@nvidia.com, dri-devel@lists.freedesktop.org, Mikko Perttunen <mperttunen@nvidia.com> Subject: [PATCH v3 00/20] Host1x/TegraDRM UAPI Date: Wed, 7 Oct 2020 20:12:18 +0300 [thread overview] Message-ID: <20201007171238.1795964-1-mperttunen@nvidia.com> (raw) Hi all, here's the third revision of the Host1x/TegraDRM UAPI proposal. The open issues from RFCv2 should be resolved now, so I'm dropping the RFC tag. The series is still only tested with Tegra186 so I'm hoping for people with devices with other chips to test this out. The test suite[1] has been updated for the changes in this revision, and also includes tests for the newly added DMA reservation support. If there are no further issues with the UAPI definition, I'll look at porting other userspace next - hoping for some help with that as well since most of it is for chips I don't have easy access to. The series can be also found in https://github.com/cyndis/linux/commits/work/host1x-uapi-v3. Older versions: v1: https://www.spinics.net/lists/linux-tegra/msg51000.html v2: https://www.spinics.net/lists/linux-tegra/msg53061.html Thank you, Mikko [1] https://github.com/cyndis/uapi-test Mikko Perttunen (20): gpu: host1x: Use different lock classes for each client gpu: host1x: Allow syncpoints without associated client gpu: host1x: Show number of pending waiters in debugfs gpu: host1x: Remove cancelled waiters immediately gpu: host1x: Use HW-equivalent syncpoint expiration check gpu: host1x: Cleanup and refcounting for syncpoints gpu: host1x: Introduce UAPI header gpu: host1x: Implement /dev/host1x device node gpu: host1x: DMA fences and userspace fence creation gpu: host1x: Add no-recovery mode gpu: host1x: Add job release callback gpu: host1x: Add support for syncpoint waits in CDMA pushbuffer gpu: host1x: Reset max value when freeing a syncpoint gpu: host1x: Reserve VBLANK syncpoints at initialization drm/tegra: Add new UAPI to header drm/tegra: Boot VIC during runtime PM resume drm/tegra: Set resv fields when importing/exporting GEMs drm/tegra: Allocate per-engine channel in core code drm/tegra: Implement new UAPI drm/tegra: Add job firewall drivers/gpu/drm/tegra/Makefile | 4 + drivers/gpu/drm/tegra/dc.c | 10 +- drivers/gpu/drm/tegra/drm.c | 75 ++- drivers/gpu/drm/tegra/drm.h | 9 + drivers/gpu/drm/tegra/gem.c | 2 + drivers/gpu/drm/tegra/gr2d.c | 4 +- drivers/gpu/drm/tegra/gr3d.c | 4 +- drivers/gpu/drm/tegra/uapi.h | 63 +++ drivers/gpu/drm/tegra/uapi/firewall.c | 197 +++++++ drivers/gpu/drm/tegra/uapi/gather_bo.c | 86 ++++ drivers/gpu/drm/tegra/uapi/gather_bo.h | 22 + drivers/gpu/drm/tegra/uapi/submit.c | 679 +++++++++++++++++++++++++ drivers/gpu/drm/tegra/uapi/submit.h | 20 + drivers/gpu/drm/tegra/uapi/uapi.c | 326 ++++++++++++ drivers/gpu/drm/tegra/vic.c | 118 ++--- drivers/gpu/host1x/Makefile | 2 + drivers/gpu/host1x/bus.c | 7 +- drivers/gpu/host1x/cdma.c | 69 ++- drivers/gpu/host1x/debug.c | 14 +- drivers/gpu/host1x/dev.c | 15 + drivers/gpu/host1x/dev.h | 16 +- drivers/gpu/host1x/fence.c | 207 ++++++++ drivers/gpu/host1x/fence.h | 13 + drivers/gpu/host1x/hw/cdma_hw.c | 2 +- drivers/gpu/host1x/hw/channel_hw.c | 63 ++- drivers/gpu/host1x/hw/debug_hw.c | 11 +- drivers/gpu/host1x/intr.c | 23 +- drivers/gpu/host1x/intr.h | 2 + drivers/gpu/host1x/job.c | 79 ++- drivers/gpu/host1x/job.h | 14 + drivers/gpu/host1x/syncpt.c | 185 ++++--- drivers/gpu/host1x/syncpt.h | 16 +- drivers/gpu/host1x/uapi.c | 382 ++++++++++++++ drivers/gpu/host1x/uapi.h | 22 + include/linux/host1x.h | 47 +- include/uapi/drm/tegra_drm.h | 420 ++++++++++++++- include/uapi/linux/host1x.h | 134 +++++ 37 files changed, 3076 insertions(+), 286 deletions(-) create mode 100644 drivers/gpu/drm/tegra/uapi.h create mode 100644 drivers/gpu/drm/tegra/uapi/firewall.c create mode 100644 drivers/gpu/drm/tegra/uapi/gather_bo.c create mode 100644 drivers/gpu/drm/tegra/uapi/gather_bo.h create mode 100644 drivers/gpu/drm/tegra/uapi/submit.c create mode 100644 drivers/gpu/drm/tegra/uapi/submit.h create mode 100644 drivers/gpu/drm/tegra/uapi/uapi.c create mode 100644 drivers/gpu/host1x/fence.c create mode 100644 drivers/gpu/host1x/fence.h create mode 100644 drivers/gpu/host1x/uapi.c create mode 100644 drivers/gpu/host1x/uapi.h create mode 100644 include/uapi/linux/host1x.h -- 2.28.0 _______________________________________________ dri-devel mailing list dri-devel@lists.freedesktop.org https://lists.freedesktop.org/mailman/listinfo/dri-devel
next reply other threads:[~2020-10-07 17:17 UTC|newest] Thread overview: 80+ messages / expand[flat|nested] mbox.gz Atom feed top 2020-10-07 17:12 Mikko Perttunen [this message] 2020-10-07 17:12 ` [PATCH v3 00/20] Host1x/TegraDRM UAPI Mikko Perttunen 2020-10-07 17:12 ` [PATCH v3 01/20] gpu: host1x: Use different lock classes for each client Mikko Perttunen 2020-10-07 17:12 ` Mikko Perttunen 2020-10-07 17:12 ` [PATCH v3 02/20] gpu: host1x: Allow syncpoints without associated client Mikko Perttunen 2020-10-07 17:12 ` Mikko Perttunen 2020-10-07 17:12 ` [PATCH v3 03/20] gpu: host1x: Show number of pending waiters in debugfs Mikko Perttunen 2020-10-07 17:12 ` Mikko Perttunen 2020-10-07 17:12 ` [PATCH v3 04/20] gpu: host1x: Remove cancelled waiters immediately Mikko Perttunen 2020-10-07 17:12 ` Mikko Perttunen 2020-10-07 17:12 ` [PATCH v3 05/20] gpu: host1x: Use HW-equivalent syncpoint expiration check Mikko Perttunen 2020-10-07 17:12 ` Mikko Perttunen 2020-10-07 17:12 ` [PATCH v3 06/20] gpu: host1x: Cleanup and refcounting for syncpoints Mikko Perttunen 2020-10-07 17:12 ` Mikko Perttunen 2020-10-07 22:23 ` kernel test robot 2020-10-07 22:23 ` kernel test robot 2020-10-07 22:23 ` kernel test robot 2020-10-07 17:12 ` [PATCH v3 07/20] gpu: host1x: Introduce UAPI header Mikko Perttunen 2020-10-07 17:12 ` Mikko Perttunen 2020-10-07 17:12 ` [PATCH v3 08/20] gpu: host1x: Implement /dev/host1x device node Mikko Perttunen 2020-10-07 17:12 ` Mikko Perttunen 2020-10-07 17:12 ` [PATCH v3 09/20] gpu: host1x: DMA fences and userspace fence creation Mikko Perttunen 2020-10-07 17:12 ` Mikko Perttunen 2020-10-07 23:13 ` kernel test robot 2020-10-07 23:13 ` kernel test robot 2020-10-07 23:13 ` kernel test robot 2020-10-08 11:13 ` kernel test robot 2020-10-08 11:13 ` kernel test robot 2020-10-08 11:13 ` kernel test robot 2020-10-07 17:12 ` [PATCH v3 10/20] gpu: host1x: Add no-recovery mode Mikko Perttunen 2020-10-07 17:12 ` Mikko Perttunen 2020-10-07 17:12 ` [PATCH v3 11/20] gpu: host1x: Add job release callback Mikko Perttunen 2020-10-07 17:12 ` Mikko Perttunen 2020-10-07 17:12 ` [PATCH v3 12/20] gpu: host1x: Add support for syncpoint waits in CDMA pushbuffer Mikko Perttunen 2020-10-07 17:12 ` Mikko Perttunen 2020-10-07 17:12 ` [PATCH v3 13/20] gpu: host1x: Reset max value when freeing a syncpoint Mikko Perttunen 2020-10-07 17:12 ` Mikko Perttunen 2020-10-07 17:12 ` [PATCH v3 14/20] gpu: host1x: Reserve VBLANK syncpoints at initialization Mikko Perttunen 2020-10-07 17:12 ` Mikko Perttunen 2020-10-07 17:12 ` [PATCH v3 15/20] drm/tegra: Add new UAPI to header Mikko Perttunen 2020-10-07 17:12 ` Mikko Perttunen 2020-10-07 17:12 ` [PATCH v3 16/20] drm/tegra: Boot VIC during runtime PM resume Mikko Perttunen 2020-10-07 17:12 ` Mikko Perttunen 2020-10-07 17:12 ` [PATCH v3 17/20] drm/tegra: Set resv fields when importing/exporting GEMs Mikko Perttunen 2020-10-07 17:12 ` Mikko Perttunen 2020-10-07 17:12 ` [PATCH v3 18/20] drm/tegra: Allocate per-engine channel in core code Mikko Perttunen 2020-10-07 17:12 ` Mikko Perttunen 2020-10-07 17:12 ` [PATCH v3 19/20] drm/tegra: Implement new UAPI Mikko Perttunen 2020-10-07 17:12 ` Mikko Perttunen 2020-10-08 3:42 ` kernel test robot 2020-10-08 3:42 ` kernel test robot 2020-10-08 3:42 ` kernel test robot 2020-10-19 2:21 ` Dmitry Osipenko 2020-10-19 2:21 ` Dmitry Osipenko 2020-10-19 8:13 ` Mikko Perttunen 2020-10-19 8:13 ` Mikko Perttunen 2020-10-19 17:27 ` Dmitry Osipenko 2020-10-19 17:27 ` Dmitry Osipenko 2020-10-20 9:18 ` Mikko Perttunen 2020-10-20 9:18 ` Mikko Perttunen 2020-10-22 4:20 ` Dmitry Osipenko 2020-10-22 4:20 ` Dmitry Osipenko 2020-10-26 9:11 ` Mikko Perttunen 2020-10-26 9:11 ` Mikko Perttunen 2020-10-27 19:06 ` Dmitry Osipenko 2020-10-27 19:06 ` Dmitry Osipenko 2020-10-28 9:54 ` Mikko Perttunen 2020-10-28 9:54 ` Mikko Perttunen 2020-10-30 23:13 ` Dmitry Osipenko 2020-10-30 23:13 ` Dmitry Osipenko 2020-11-09 14:53 ` Mikko Perttunen 2020-11-09 14:53 ` Mikko Perttunen 2020-11-12 18:35 ` Dmitry Osipenko 2020-11-12 18:35 ` Dmitry Osipenko 2020-10-20 11:40 ` Daniel Vetter 2020-10-20 11:40 ` Daniel Vetter 2020-10-20 12:51 ` Mikko Perttunen 2020-10-20 12:51 ` Mikko Perttunen 2020-10-07 17:12 ` [PATCH v3 20/20] drm/tegra: Add job firewall Mikko Perttunen 2020-10-07 17:12 ` Mikko Perttunen
Reply instructions: You may reply publicly to this message via plain-text email using any one of the following methods: * Save the following mbox file, import it into your mail client, and reply-to-all from there: mbox Avoid top-posting and favor interleaved quoting: https://en.wikipedia.org/wiki/Posting_style#Interleaved_style * Reply using the --to, --cc, and --in-reply-to switches of git-send-email(1): git send-email \ --in-reply-to=20201007171238.1795964-1-mperttunen@nvidia.com \ --to=mperttunen@nvidia.com \ --cc=airlied@linux.ie \ --cc=bhuntsman@nvidia.com \ --cc=daniel@ffwll.ch \ --cc=digetx@gmail.com \ --cc=dri-devel@lists.freedesktop.org \ --cc=jonathanh@nvidia.com \ --cc=linux-tegra@vger.kernel.org \ --cc=talho@nvidia.com \ --cc=thierry.reding@gmail.com \ /path/to/YOUR_REPLY https://kernel.org/pub/software/scm/git/docs/git-send-email.html * If your mail client supports setting the In-Reply-To header via mailto: links, try the mailto: linkBe sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.