[PATCH 4/4] drm/vc4: kms: Fix VBLANK reporting on a disabled CRTC

[Maxime Ripard <maxime@cerno.tech>]

If a CRTC is enabled but not active, and that we're then doing a page flip
on another CRTC, drm_atomic_get_crtc_state will bring the first CRTC state
into the global state, and will make us wait for its vblank as well, even
though that might never occur.

Fix this by considering all the enabled CRTCs by either using their new
state in the global state, or using their current state if they aren't part
of the new state being checked, to remove their assigned channel from the
pool before started to assign channels to CRTCs enabled by the state.

Fixes: 87ebcd42fb7b ("drm/vc4: crtc: Assign output to channel automatically")
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
---
 drivers/gpu/drm/vc4/vc4_kms.c | 24 +++++++++++++++---------
 1 file changed, 15 insertions(+), 9 deletions(-)

diff --git a/drivers/gpu/drm/vc4/vc4_kms.c b/drivers/gpu/drm/vc4/vc4_kms.c
index c9dfd5535a7e..0751ce5c6467 100644
--- a/drivers/gpu/drm/vc4/vc4_kms.c
+++ b/drivers/gpu/drm/vc4/vc4_kms.c
@@ -645,6 +645,14 @@ static const struct drm_private_state_funcs vc4_load_tracker_state_funcs = {
  *   need to consider all the running CRTCs in the DRM device to assign
  *   a FIFO, not just the one in the state.
  *
+ * - To fix the above, we can't use drm_atomic_get_crtc_state on all
+ *   enabled CRTCs to pull their CRTC state into the global state, since
+ *   a page flip would start considering their vblank to complete. Since
+ *   we don't have a guarantee that they are actually active, that
+ *   vblank might never happen, and shouldn't even be considered if we
+ *   want to do a page flip on a single CRTC. That can be tested by
+ *   doing a modetest -v first on HDMI1 and then on HDMI0.
+ *
  * - Since we need the pixelvalve to be disabled and enabled back when
  *   the FIFO is changed, we should keep the FIFO assigned for as long
  *   as the CRTC is enabled, only considering it free again once that
@@ -656,6 +664,7 @@ static int vc4_pv_muxing_atomic_check(struct drm_device *dev,
 {
 	unsigned long unassigned_channels = GENMASK(NUM_CHANNELS - 1, 0);
 	struct drm_crtc_state *old_crtc_state, *new_crtc_state;
+	struct drm_crtc_state *crtc_state;
 	struct drm_crtc *crtc;
 	unsigned int i;
 
@@ -667,15 +676,14 @@ static int vc4_pv_muxing_atomic_check(struct drm_device *dev,
 	 * the same CRTCs, instead of evaluating only the CRTC being
 	 * modified.
 	 */
-	list_for_each_entry(crtc, &dev->mode_config.crtc_list, head) {
-		struct drm_crtc_state *crtc_state;
+	for_each_new_or_current_crtc_state(state, crtc, crtc_state) {
+		struct vc4_crtc_state *vc4_crtc_state;
 
-		if (!crtc->state->enable)
+		if (!crtc_state->enable)
 			continue;
 
-		crtc_state = drm_atomic_get_crtc_state(state, crtc);
-		if (IS_ERR(crtc_state))
-			return PTR_ERR(crtc_state);
+		vc4_crtc_state = to_vc4_crtc_state(crtc_state);
+		unassigned_channels &= ~BIT(vc4_crtc_state->assigned_channel);
 	}
 
 	for_each_oldnew_crtc_in_state(state, crtc, old_crtc_state, new_crtc_state, i) {
@@ -690,10 +698,8 @@ static int vc4_pv_muxing_atomic_check(struct drm_device *dev,
 		if (!new_crtc_state->enable)
 			continue;
 
-		if (new_vc4_crtc_state->assigned_channel != VC4_HVS_CHANNEL_DISABLED) {
-			unassigned_channels &= ~BIT(new_vc4_crtc_state->assigned_channel);
+		if (new_vc4_crtc_state->assigned_channel != VC4_HVS_CHANNEL_DISABLED)
 			continue;
-		}
 
 		/*
 		 * The problem we have to solve here is that we have
-- 
2.26.2