All of lore.kernel.org
 help / color / mirror / Atom feed
From: Peter Ujfalusi <peter.ujfalusi@ti.com>
To: <nm@ti.com>, <t-kristo@ti.com>, <ssantosh@kernel.org>,
	<lokeshvutla@ti.com>
Cc: <linux-arm-kernel@lists.infradead.org>,
	<linux-kernel@vger.kernel.org>, <grygorii.strashko@ti.com>
Subject: [PATCH v2 08/11] soc: ti: k3-ringacc: Use the ti_sci set_cfg callback for ring configuration
Date: Thu, 8 Oct 2020 14:52:21 +0300	[thread overview]
Message-ID: <20201008115224.1591-9-peter.ujfalusi@ti.com> (raw)
In-Reply-To: <20201008115224.1591-1-peter.ujfalusi@ti.com>

Switch to the new set_cfg to configure the ring.

Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Reviewed-by: Grygorii Strashko <grygorii.strashko@ti.com>
---
 drivers/soc/ti/k3-ringacc.c | 79 +++++++++++++++----------------------
 1 file changed, 32 insertions(+), 47 deletions(-)

diff --git a/drivers/soc/ti/k3-ringacc.c b/drivers/soc/ti/k3-ringacc.c
index 1147dc4c1d59..9ddd77113c5a 100644
--- a/drivers/soc/ti/k3-ringacc.c
+++ b/drivers/soc/ti/k3-ringacc.c
@@ -365,20 +365,16 @@ EXPORT_SYMBOL_GPL(k3_ringacc_request_rings_pair);
 
 static void k3_ringacc_ring_reset_sci(struct k3_ring *ring)
 {
+	struct ti_sci_msg_rm_ring_cfg ring_cfg = { 0 };
 	struct k3_ringacc *ringacc = ring->parent;
 	int ret;
 
-	ret = ringacc->tisci_ring_ops->config(
-			ringacc->tisci,
-			TI_SCI_MSG_VALUE_RM_RING_COUNT_VALID,
-			ringacc->tisci_dev_id,
-			ring->ring_id,
-			0,
-			0,
-			ring->size,
-			0,
-			0,
-			0);
+	ring_cfg.nav_id = ringacc->tisci_dev_id;
+	ring_cfg.index = ring->ring_id;
+	ring_cfg.valid_params = TI_SCI_MSG_VALUE_RM_RING_COUNT_VALID;
+	ring_cfg.count = ring->size;
+
+	ret = ringacc->tisci_ring_ops->set_cfg(ringacc->tisci, &ring_cfg);
 	if (ret)
 		dev_err(ringacc->dev, "TISCI reset ring fail (%d) ring_idx %d\n",
 			ret, ring->ring_id);
@@ -398,20 +394,16 @@ EXPORT_SYMBOL_GPL(k3_ringacc_ring_reset);
 static void k3_ringacc_ring_reconfig_qmode_sci(struct k3_ring *ring,
 					       enum k3_ring_mode mode)
 {
+	struct ti_sci_msg_rm_ring_cfg ring_cfg = { 0 };
 	struct k3_ringacc *ringacc = ring->parent;
 	int ret;
 
-	ret = ringacc->tisci_ring_ops->config(
-			ringacc->tisci,
-			TI_SCI_MSG_VALUE_RM_RING_MODE_VALID,
-			ringacc->tisci_dev_id,
-			ring->ring_id,
-			0,
-			0,
-			0,
-			mode,
-			0,
-			0);
+	ring_cfg.nav_id = ringacc->tisci_dev_id;
+	ring_cfg.index = ring->ring_id;
+	ring_cfg.valid_params = TI_SCI_MSG_VALUE_RM_RING_MODE_VALID;
+	ring_cfg.mode = mode;
+
+	ret = ringacc->tisci_ring_ops->set_cfg(ringacc->tisci, &ring_cfg);
 	if (ret)
 		dev_err(ringacc->dev, "TISCI reconf qmode fail (%d) ring_idx %d\n",
 			ret, ring->ring_id);
@@ -478,20 +470,15 @@ EXPORT_SYMBOL_GPL(k3_ringacc_ring_reset_dma);
 
 static void k3_ringacc_ring_free_sci(struct k3_ring *ring)
 {
+	struct ti_sci_msg_rm_ring_cfg ring_cfg = { 0 };
 	struct k3_ringacc *ringacc = ring->parent;
 	int ret;
 
-	ret = ringacc->tisci_ring_ops->config(
-			ringacc->tisci,
-			TI_SCI_MSG_VALUE_RM_ALL_NO_ORDER,
-			ringacc->tisci_dev_id,
-			ring->ring_id,
-			0,
-			0,
-			0,
-			0,
-			0,
-			0);
+	ring_cfg.nav_id = ringacc->tisci_dev_id;
+	ring_cfg.index = ring->ring_id;
+	ring_cfg.valid_params = TI_SCI_MSG_VALUE_RM_ALL_NO_ORDER;
+
+	ret = ringacc->tisci_ring_ops->set_cfg(ringacc->tisci, &ring_cfg);
 	if (ret)
 		dev_err(ringacc->dev, "TISCI ring free fail (%d) ring_idx %d\n",
 			ret, ring->ring_id);
@@ -575,28 +562,26 @@ EXPORT_SYMBOL_GPL(k3_ringacc_get_ring_irq_num);
 
 static int k3_ringacc_ring_cfg_sci(struct k3_ring *ring)
 {
+	struct ti_sci_msg_rm_ring_cfg ring_cfg = { 0 };
 	struct k3_ringacc *ringacc = ring->parent;
-	u32 ring_idx;
 	int ret;
 
 	if (!ringacc->tisci)
 		return -EINVAL;
 
-	ring_idx = ring->ring_id;
-	ret = ringacc->tisci_ring_ops->config(
-			ringacc->tisci,
-			TI_SCI_MSG_VALUE_RM_ALL_NO_ORDER,
-			ringacc->tisci_dev_id,
-			ring_idx,
-			lower_32_bits(ring->ring_mem_dma),
-			upper_32_bits(ring->ring_mem_dma),
-			ring->size,
-			ring->mode,
-			ring->elm_size,
-			0);
+	ring_cfg.nav_id = ringacc->tisci_dev_id;
+	ring_cfg.index = ring->ring_id;
+	ring_cfg.valid_params = TI_SCI_MSG_VALUE_RM_ALL_NO_ORDER;
+	ring_cfg.addr_lo = lower_32_bits(ring->ring_mem_dma);
+	ring_cfg.addr_hi = upper_32_bits(ring->ring_mem_dma);
+	ring_cfg.count = ring->size;
+	ring_cfg.mode = ring->mode;
+	ring_cfg.size = ring->elm_size;
+
+	ret = ringacc->tisci_ring_ops->set_cfg(ringacc->tisci, &ring_cfg);
 	if (ret)
 		dev_err(ringacc->dev, "TISCI config ring fail (%d) ring_idx %d\n",
-			ret, ring_idx);
+			ret, ring->ring_id);
 
 	return ret;
 }
-- 
Peter

Texas Instruments Finland Oy, Porkkalankatu 22, 00180 Helsinki.
Y-tunnus/Business ID: 0615521-4. Kotipaikka/Domicile: Helsinki


WARNING: multiple messages have this Message-ID (diff)
From: Peter Ujfalusi <peter.ujfalusi@ti.com>
To: <nm@ti.com>, <t-kristo@ti.com>, <ssantosh@kernel.org>,
	<lokeshvutla@ti.com>
Cc: grygorii.strashko@ti.com, linux-kernel@vger.kernel.org,
	linux-arm-kernel@lists.infradead.org
Subject: [PATCH v2 08/11] soc: ti: k3-ringacc: Use the ti_sci set_cfg callback for ring configuration
Date: Thu, 8 Oct 2020 14:52:21 +0300	[thread overview]
Message-ID: <20201008115224.1591-9-peter.ujfalusi@ti.com> (raw)
In-Reply-To: <20201008115224.1591-1-peter.ujfalusi@ti.com>

Switch to the new set_cfg to configure the ring.

Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Reviewed-by: Grygorii Strashko <grygorii.strashko@ti.com>
---
 drivers/soc/ti/k3-ringacc.c | 79 +++++++++++++++----------------------
 1 file changed, 32 insertions(+), 47 deletions(-)

diff --git a/drivers/soc/ti/k3-ringacc.c b/drivers/soc/ti/k3-ringacc.c
index 1147dc4c1d59..9ddd77113c5a 100644
--- a/drivers/soc/ti/k3-ringacc.c
+++ b/drivers/soc/ti/k3-ringacc.c
@@ -365,20 +365,16 @@ EXPORT_SYMBOL_GPL(k3_ringacc_request_rings_pair);
 
 static void k3_ringacc_ring_reset_sci(struct k3_ring *ring)
 {
+	struct ti_sci_msg_rm_ring_cfg ring_cfg = { 0 };
 	struct k3_ringacc *ringacc = ring->parent;
 	int ret;
 
-	ret = ringacc->tisci_ring_ops->config(
-			ringacc->tisci,
-			TI_SCI_MSG_VALUE_RM_RING_COUNT_VALID,
-			ringacc->tisci_dev_id,
-			ring->ring_id,
-			0,
-			0,
-			ring->size,
-			0,
-			0,
-			0);
+	ring_cfg.nav_id = ringacc->tisci_dev_id;
+	ring_cfg.index = ring->ring_id;
+	ring_cfg.valid_params = TI_SCI_MSG_VALUE_RM_RING_COUNT_VALID;
+	ring_cfg.count = ring->size;
+
+	ret = ringacc->tisci_ring_ops->set_cfg(ringacc->tisci, &ring_cfg);
 	if (ret)
 		dev_err(ringacc->dev, "TISCI reset ring fail (%d) ring_idx %d\n",
 			ret, ring->ring_id);
@@ -398,20 +394,16 @@ EXPORT_SYMBOL_GPL(k3_ringacc_ring_reset);
 static void k3_ringacc_ring_reconfig_qmode_sci(struct k3_ring *ring,
 					       enum k3_ring_mode mode)
 {
+	struct ti_sci_msg_rm_ring_cfg ring_cfg = { 0 };
 	struct k3_ringacc *ringacc = ring->parent;
 	int ret;
 
-	ret = ringacc->tisci_ring_ops->config(
-			ringacc->tisci,
-			TI_SCI_MSG_VALUE_RM_RING_MODE_VALID,
-			ringacc->tisci_dev_id,
-			ring->ring_id,
-			0,
-			0,
-			0,
-			mode,
-			0,
-			0);
+	ring_cfg.nav_id = ringacc->tisci_dev_id;
+	ring_cfg.index = ring->ring_id;
+	ring_cfg.valid_params = TI_SCI_MSG_VALUE_RM_RING_MODE_VALID;
+	ring_cfg.mode = mode;
+
+	ret = ringacc->tisci_ring_ops->set_cfg(ringacc->tisci, &ring_cfg);
 	if (ret)
 		dev_err(ringacc->dev, "TISCI reconf qmode fail (%d) ring_idx %d\n",
 			ret, ring->ring_id);
@@ -478,20 +470,15 @@ EXPORT_SYMBOL_GPL(k3_ringacc_ring_reset_dma);
 
 static void k3_ringacc_ring_free_sci(struct k3_ring *ring)
 {
+	struct ti_sci_msg_rm_ring_cfg ring_cfg = { 0 };
 	struct k3_ringacc *ringacc = ring->parent;
 	int ret;
 
-	ret = ringacc->tisci_ring_ops->config(
-			ringacc->tisci,
-			TI_SCI_MSG_VALUE_RM_ALL_NO_ORDER,
-			ringacc->tisci_dev_id,
-			ring->ring_id,
-			0,
-			0,
-			0,
-			0,
-			0,
-			0);
+	ring_cfg.nav_id = ringacc->tisci_dev_id;
+	ring_cfg.index = ring->ring_id;
+	ring_cfg.valid_params = TI_SCI_MSG_VALUE_RM_ALL_NO_ORDER;
+
+	ret = ringacc->tisci_ring_ops->set_cfg(ringacc->tisci, &ring_cfg);
 	if (ret)
 		dev_err(ringacc->dev, "TISCI ring free fail (%d) ring_idx %d\n",
 			ret, ring->ring_id);
@@ -575,28 +562,26 @@ EXPORT_SYMBOL_GPL(k3_ringacc_get_ring_irq_num);
 
 static int k3_ringacc_ring_cfg_sci(struct k3_ring *ring)
 {
+	struct ti_sci_msg_rm_ring_cfg ring_cfg = { 0 };
 	struct k3_ringacc *ringacc = ring->parent;
-	u32 ring_idx;
 	int ret;
 
 	if (!ringacc->tisci)
 		return -EINVAL;
 
-	ring_idx = ring->ring_id;
-	ret = ringacc->tisci_ring_ops->config(
-			ringacc->tisci,
-			TI_SCI_MSG_VALUE_RM_ALL_NO_ORDER,
-			ringacc->tisci_dev_id,
-			ring_idx,
-			lower_32_bits(ring->ring_mem_dma),
-			upper_32_bits(ring->ring_mem_dma),
-			ring->size,
-			ring->mode,
-			ring->elm_size,
-			0);
+	ring_cfg.nav_id = ringacc->tisci_dev_id;
+	ring_cfg.index = ring->ring_id;
+	ring_cfg.valid_params = TI_SCI_MSG_VALUE_RM_ALL_NO_ORDER;
+	ring_cfg.addr_lo = lower_32_bits(ring->ring_mem_dma);
+	ring_cfg.addr_hi = upper_32_bits(ring->ring_mem_dma);
+	ring_cfg.count = ring->size;
+	ring_cfg.mode = ring->mode;
+	ring_cfg.size = ring->elm_size;
+
+	ret = ringacc->tisci_ring_ops->set_cfg(ringacc->tisci, &ring_cfg);
 	if (ret)
 		dev_err(ringacc->dev, "TISCI config ring fail (%d) ring_idx %d\n",
-			ret, ring_idx);
+			ret, ring->ring_id);
 
 	return ret;
 }
-- 
Peter

Texas Instruments Finland Oy, Porkkalankatu 22, 00180 Helsinki.
Y-tunnus/Business ID: 0615521-4. Kotipaikka/Domicile: Helsinki


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

  parent reply	other threads:[~2020-10-08 11:52 UTC|newest]

Thread overview: 40+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2020-10-08 11:52 [PATCH v2 00/11] firmware/soc: ti_sci, ringacc/inta: Preparation for AM64 DMA support Peter Ujfalusi
2020-10-08 11:52 ` Peter Ujfalusi
2020-10-08 11:52 ` [PATCH v2 01/11] firmware: ti_sci: rm: Add support for tx_tdtype parameter for tx channel Peter Ujfalusi
2020-10-08 11:52   ` Peter Ujfalusi
2020-10-08 11:52 ` [PATCH v2 02/11] firmware: ti_sci: Use struct ti_sci_resource_desc in get_range ops Peter Ujfalusi
2020-10-08 11:52   ` Peter Ujfalusi
2020-10-08 11:52 ` [PATCH v2 03/11] firmware: ti_sci: rm: Add support for second resource range Peter Ujfalusi
2020-10-08 11:52   ` Peter Ujfalusi
2020-10-08 11:52 ` [PATCH v2 04/11] soc: ti: ti_sci_inta_msi: Add support for second range in resource ranges Peter Ujfalusi
2020-10-08 11:52   ` Peter Ujfalusi
2020-10-08 11:52 ` [PATCH v2 05/11] firmware: ti_sci: rm: Add support for extended_ch_type for tx channel Peter Ujfalusi
2020-10-08 11:52   ` Peter Ujfalusi
2020-10-08 11:52 ` [PATCH v2 06/11] firmware: ti_sci: rm: Remove ring_get_config support Peter Ujfalusi
2020-10-08 11:52   ` Peter Ujfalusi
2020-10-08 11:52 ` [PATCH v2 07/11] firmware: ti_sci: rm: Add new ops for ring configuration Peter Ujfalusi
2020-10-08 11:52   ` Peter Ujfalusi
2020-10-08 11:52 ` Peter Ujfalusi [this message]
2020-10-08 11:52   ` [PATCH v2 08/11] soc: ti: k3-ringacc: Use the ti_sci set_cfg callback " Peter Ujfalusi
2020-10-08 11:52 ` [PATCH v2 09/11] firmware: ti_sci: rm: Remove unused config() from ti_sci_rm_ringacc_ops Peter Ujfalusi
2020-10-08 11:52   ` Peter Ujfalusi
2020-10-08 11:52 ` [PATCH v2 10/11] soc: ti: k3-ringacc: Use correct device for allocation in RING mode Peter Ujfalusi
2020-10-08 11:52   ` Peter Ujfalusi
2020-10-09  3:02   ` Nishanth Menon
2020-10-09  3:02     ` Nishanth Menon
2020-10-09  7:43     ` Peter Ujfalusi
2020-10-09  7:43       ` Peter Ujfalusi
2020-10-09 11:59       ` Nishanth Menon
2020-10-09 11:59         ` Nishanth Menon
2020-10-09 12:10         ` Peter Ujfalusi
2020-10-09 12:10           ` Peter Ujfalusi
2020-10-08 11:52 ` [PATCH v2 11/11] soc: ti: k3-socinfo: Add entry for AM64X SoC family Peter Ujfalusi
2020-10-08 11:52   ` Peter Ujfalusi
2020-10-09  0:54 ` [PATCH v2 00/11] firmware/soc: ti_sci, ringacc/inta: Preparation for AM64 DMA support santosh.shilimkar
2020-10-09  0:54   ` santosh.shilimkar
2020-10-09  0:56 ` santosh.shilimkar
2020-10-09  0:56   ` santosh.shilimkar
2020-10-09  8:08   ` Peter Ujfalusi
2020-10-09  8:08     ` Peter Ujfalusi
2020-11-02  3:44   ` santosh.shilimkar
2020-11-02  3:44     ` santosh.shilimkar

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20201008115224.1591-9-peter.ujfalusi@ti.com \
    --to=peter.ujfalusi@ti.com \
    --cc=grygorii.strashko@ti.com \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=lokeshvutla@ti.com \
    --cc=nm@ti.com \
    --cc=ssantosh@kernel.org \
    --cc=t-kristo@ti.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body. 
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.