* [PATCH 0/4] pm80xx updates
@ 2020-10-12 5:24 Viswas G
2020-10-12 5:24 ` [PATCH 1/4] pm80xx: make mpi_build_cmd locking consistent Viswas G
` (3 more replies)
0 siblings, 4 replies; 6+ messages in thread
From: Viswas G @ 2020-10-12 5:24 UTC (permalink / raw)
To: linux-scsi
Cc: Vasanthalakshmi.Tharmarajan, Ruksar Devadi, Viswas.G,
peter chang --cc=yuuzheng @ google . com, vishakhavc, radha,
akshatzen
From: Viswas G <Viswas.G@microchip.com>
This patch set include some bug fixes for pm80xx driver.
Viswas G (1):
pm80xx: make running_req atomic.
akshatzen (1):
pm80xx: Avoid busywait in FW ready check
peter chang (1):
pm80xx: make mpi_build_cmd locking consistent
yuuzheng (1):
pm80xx: make pm8001_mpi_set_nvmd_resp free of race condition
drivers/scsi/pm8001/pm8001_hwi.c | 86 +++++++++++++++++++------
drivers/scsi/pm8001/pm8001_init.c | 2 +-
drivers/scsi/pm8001/pm8001_sas.c | 11 ++--
drivers/scsi/pm8001/pm8001_sas.h | 2 +-
drivers/scsi/pm8001/pm80xx_hwi.c | 130 ++++++++++++++++++++++++++++++--------
drivers/scsi/pm8001/pm80xx_hwi.h | 6 ++
6 files changed, 185 insertions(+), 52 deletions(-)
--
2.16.3
^ permalink raw reply [flat|nested] 6+ messages in thread
* [PATCH 1/4] pm80xx: make mpi_build_cmd locking consistent
2020-10-12 5:24 [PATCH 0/4] pm80xx updates Viswas G
@ 2020-10-12 5:24 ` Viswas G
2020-10-27 0:41 ` Martin K. Petersen
2020-10-12 5:24 ` [PATCH 2/4] pm80xx: make running_req atomic Viswas G
` (2 subsequent siblings)
3 siblings, 1 reply; 6+ messages in thread
From: Viswas G @ 2020-10-12 5:24 UTC (permalink / raw)
To: linux-scsi
Cc: Vasanthalakshmi.Tharmarajan, Ruksar Devadi, Viswas.G,
peter chang --cc=yuuzheng @ google . com, vishakhavc, radha,
akshatzen
From: peter chang <dpf@google.com>
the missing task completions appear to be because the driver shadow
structures for the command issue queue can get out of sync between
issues because the locking is inconsistent (none, host adapter lock,
and per-cpu issue queue). the inconsistency is because sata requests
issue per-cpu but management commands (eg, aborts etc) issue
from queue zero. if a sata request issues from cpu zero when a
management request issues, then there is some 'tearing' and the issue
queue is sort of broken and we lose track of issues.
disabling interrupts may be overkill because there may not be cases
where we're using this from interrupt context (the interrupt path
has a different per-queue lock).
Signed-off-by: peter chang <dpf@google.com>
Signed-off-by: Viswas G <Viswas.G@microchip.com>
Signed-off-by: Ruksar Devadi <Ruksar.devadi@microchip.com>
Signed-off-by: Radha Ramachandran <radha@google.com>
---
drivers/scsi/pm8001/pm8001_hwi.c | 21 +++++++++++++++------
drivers/scsi/pm8001/pm80xx_hwi.c | 8 --------
2 files changed, 15 insertions(+), 14 deletions(-)
diff --git a/drivers/scsi/pm8001/pm8001_hwi.c b/drivers/scsi/pm8001/pm8001_hwi.c
index 2b7b2954ec31..597d7a096a97 100644
--- a/drivers/scsi/pm8001/pm8001_hwi.c
+++ b/drivers/scsi/pm8001/pm8001_hwi.c
@@ -1356,12 +1356,19 @@ int pm8001_mpi_build_cmd(struct pm8001_hba_info *pm8001_ha,
{
u32 Header = 0, hpriority = 0, bc = 1, category = 0x02;
void *pMessage;
-
- if (pm8001_mpi_msg_free_get(circularQ, pm8001_ha->iomb_size,
- &pMessage) < 0) {
+ unsigned long flags;
+ int q_index = circularQ - pm8001_ha->inbnd_q_tbl;
+ int rv = -1;
+
+ WARN_ON(q_index >= PM8001_MAX_INB_NUM);
+ spin_lock_irqsave(&circularQ->iq_lock, flags);
+ rv = pm8001_mpi_msg_free_get(circularQ, pm8001_ha->iomb_size,
+ &pMessage);
+ if (rv < 0) {
PM8001_IO_DBG(pm8001_ha,
- pm8001_printk("No free mpi buffer\n"));
- return -ENOMEM;
+ pm8001_printk("No free mpi buffer\n"));
+ rv = -ENOMEM;
+ goto done;
}
if (nb > (pm8001_ha->iomb_size - sizeof(struct mpi_msg_hdr)))
@@ -1384,7 +1391,9 @@ int pm8001_mpi_build_cmd(struct pm8001_hba_info *pm8001_ha,
pm8001_printk("INB Q %x OPCODE:%x , UPDATED PI=%d CI=%d\n",
responseQueue, opCode, circularQ->producer_idx,
circularQ->consumer_index));
- return 0;
+done:
+ spin_unlock_irqrestore(&circularQ->iq_lock, flags);
+ return rv;
}
u32 pm8001_mpi_msg_free_set(struct pm8001_hba_info *pm8001_ha, void *pMsg,
diff --git a/drivers/scsi/pm8001/pm80xx_hwi.c b/drivers/scsi/pm8001/pm80xx_hwi.c
index 7593f248afb2..5fe50e0effcd 100644
--- a/drivers/scsi/pm8001/pm80xx_hwi.c
+++ b/drivers/scsi/pm8001/pm80xx_hwi.c
@@ -4281,7 +4281,6 @@ static int pm80xx_chip_smp_req(struct pm8001_hba_info *pm8001_ha,
char *preq_dma_addr = NULL;
__le64 tmp_addr;
u32 i, length;
- unsigned long flags;
memset(&smp_cmd, 0, sizeof(smp_cmd));
/*
@@ -4377,10 +4376,8 @@ static int pm80xx_chip_smp_req(struct pm8001_hba_info *pm8001_ha,
build_smp_cmd(pm8001_dev->device_id, smp_cmd.tag,
&smp_cmd, pm8001_ha->smp_exp_mode, length);
- spin_lock_irqsave(&circularQ->iq_lock, flags);
rc = pm8001_mpi_build_cmd(pm8001_ha, circularQ, opc, &smp_cmd,
sizeof(smp_cmd), 0);
- spin_unlock_irqrestore(&circularQ->iq_lock, flags);
if (rc)
goto err_out_2;
return 0;
@@ -4444,7 +4441,6 @@ static int pm80xx_chip_ssp_io_req(struct pm8001_hba_info *pm8001_ha,
u64 phys_addr, start_addr, end_addr;
u32 end_addr_high, end_addr_low;
struct inbound_queue_table *circularQ;
- unsigned long flags;
u32 q_index, cpu_id;
u32 opc = OPC_INB_SSPINIIOSTART;
memset(&ssp_cmd, 0, sizeof(ssp_cmd));
@@ -4582,10 +4578,8 @@ static int pm80xx_chip_ssp_io_req(struct pm8001_hba_info *pm8001_ha,
ssp_cmd.esgl = 0;
}
}
- spin_lock_irqsave(&circularQ->iq_lock, flags);
ret = pm8001_mpi_build_cmd(pm8001_ha, circularQ, opc,
&ssp_cmd, sizeof(ssp_cmd), q_index);
- spin_unlock_irqrestore(&circularQ->iq_lock, flags);
return ret;
}
@@ -4819,10 +4813,8 @@ static int pm80xx_chip_sata_req(struct pm8001_hba_info *pm8001_ha,
}
}
}
- spin_lock_irqsave(&circularQ->iq_lock, flags);
ret = pm8001_mpi_build_cmd(pm8001_ha, circularQ, opc,
&sata_cmd, sizeof(sata_cmd), q_index);
- spin_unlock_irqrestore(&circularQ->iq_lock, flags);
return ret;
}
--
2.16.3
^ permalink raw reply related [flat|nested] 6+ messages in thread
* [PATCH 2/4] pm80xx: make running_req atomic.
2020-10-12 5:24 [PATCH 0/4] pm80xx updates Viswas G
2020-10-12 5:24 ` [PATCH 1/4] pm80xx: make mpi_build_cmd locking consistent Viswas G
@ 2020-10-12 5:24 ` Viswas G
2020-10-12 5:24 ` [PATCH 3/4] pm80xx: Avoid busywait in FW ready check Viswas G
2020-10-12 5:24 ` [PATCH 4/4] pm80xx: make pm8001_mpi_set_nvmd_resp free of race condition Viswas G
3 siblings, 0 replies; 6+ messages in thread
From: Viswas G @ 2020-10-12 5:24 UTC (permalink / raw)
To: linux-scsi
Cc: Vasanthalakshmi.Tharmarajan, Ruksar Devadi, Viswas.G,
peter chang --cc=yuuzheng @ google . com, vishakhavc, radha,
akshatzen
From: Viswas G <Viswas.G@microchip.com>
Incorrect value of the running_req was causing the driver unload
to be stuck during the sas lldd_dev_gone notification handling.
During sata IO completion, for some of the error status, driver
is scheduling event handler and running_req is decremented from that.
But there are some other error status (like IO_DS_IN_RECOVERY,
IO_XFER_ERR_LAST_PIO_DATAIN_CRC_ERR) where the IO have been completed
by fw/driver, but running_req is not decremented.
Also During NCQ error handling, driver itself will initiate
READ_LOG_EXT and ABORT_ALL. When libsas/libata initiate READ_LOG_EXT
(0x2F), driver increments the running_req. But this will be completed
by the driver in pm80xx_chip_sata_req(), but running_req was not
decremented.
Signed-off-by: Viswas G <Viswas.G@microchip.com>
Signed-off-by: Ruksar Devadi <Ruksar.devadi@microchip.com>
---
drivers/scsi/pm8001/pm8001_hwi.c | 58 +++++++++++++++++-----
drivers/scsi/pm8001/pm8001_init.c | 2 +-
drivers/scsi/pm8001/pm8001_sas.c | 11 +++--
drivers/scsi/pm8001/pm8001_sas.h | 2 +-
drivers/scsi/pm8001/pm80xx_hwi.c | 101 ++++++++++++++++++++++++++++++++++----
5 files changed, 147 insertions(+), 27 deletions(-)
diff --git a/drivers/scsi/pm8001/pm8001_hwi.c b/drivers/scsi/pm8001/pm8001_hwi.c
index 597d7a096a97..9e9a546da959 100644
--- a/drivers/scsi/pm8001/pm8001_hwi.c
+++ b/drivers/scsi/pm8001/pm8001_hwi.c
@@ -1587,7 +1587,7 @@ void pm8001_work_fn(struct work_struct *work)
ts->stat = SAS_QUEUE_FULL;
pm8001_dev = ccb->device;
if (pm8001_dev)
- pm8001_dev->running_req--;
+ atomic_dec(&pm8001_dev->running_req);
spin_lock_irqsave(&t->task_state_lock, flags1);
t->task_state_flags &= ~SAS_TASK_STATE_PENDING;
t->task_state_flags &= ~SAS_TASK_AT_INITIATOR;
@@ -1942,7 +1942,7 @@ mpi_ssp_completion(struct pm8001_hba_info *pm8001_ha , void *piomb)
sas_ssp_task_response(pm8001_ha->dev, t, iu);
}
if (pm8001_dev)
- pm8001_dev->running_req--;
+ atomic_dec(&pm8001_dev->running_req);
break;
case IO_ABORTED:
PM8001_IO_DBG(pm8001_ha,
@@ -1958,7 +1958,7 @@ mpi_ssp_completion(struct pm8001_hba_info *pm8001_ha , void *piomb)
ts->stat = SAS_DATA_UNDERRUN;
ts->residual = param;
if (pm8001_dev)
- pm8001_dev->running_req--;
+ atomic_dec(&pm8001_dev->running_req);
break;
case IO_NO_DEVICE:
PM8001_IO_DBG(pm8001_ha,
@@ -2172,7 +2172,7 @@ static void mpi_ssp_event(struct pm8001_hba_info *pm8001_ha , void *piomb)
ts->stat = SAS_DATA_OVERRUN;
ts->residual = 0;
if (pm8001_dev)
- pm8001_dev->running_req--;
+ atomic_dec(&pm8001_dev->running_req);
break;
case IO_XFER_ERROR_BREAK:
PM8001_IO_DBG(pm8001_ha,
@@ -2487,7 +2487,7 @@ mpi_sata_completion(struct pm8001_hba_info *pm8001_ha, void *piomb)
pm8001_printk("response to large\n"));
}
if (pm8001_dev)
- pm8001_dev->running_req--;
+ atomic_dec(&pm8001_dev->running_req);
break;
case IO_ABORTED:
PM8001_IO_DBG(pm8001_ha,
@@ -2495,7 +2495,7 @@ mpi_sata_completion(struct pm8001_hba_info *pm8001_ha, void *piomb)
ts->resp = SAS_TASK_COMPLETE;
ts->stat = SAS_ABORTED_TASK;
if (pm8001_dev)
- pm8001_dev->running_req--;
+ atomic_dec(&pm8001_dev->running_req);
break;
/* following cases are to do cases */
case IO_UNDERFLOW:
@@ -2506,19 +2506,23 @@ mpi_sata_completion(struct pm8001_hba_info *pm8001_ha, void *piomb)
ts->stat = SAS_DATA_UNDERRUN;
ts->residual = param;
if (pm8001_dev)
- pm8001_dev->running_req--;
+ atomic_dec(&pm8001_dev->running_req);
break;
case IO_NO_DEVICE:
PM8001_IO_DBG(pm8001_ha,
pm8001_printk("IO_NO_DEVICE\n"));
ts->resp = SAS_TASK_UNDELIVERED;
ts->stat = SAS_PHY_DOWN;
+ if (pm8001_dev)
+ atomic_dec(&pm8001_dev->running_req);
break;
case IO_XFER_ERROR_BREAK:
PM8001_IO_DBG(pm8001_ha,
pm8001_printk("IO_XFER_ERROR_BREAK\n"));
ts->resp = SAS_TASK_COMPLETE;
ts->stat = SAS_INTERRUPTED;
+ if (pm8001_dev)
+ atomic_dec(&pm8001_dev->running_req);
break;
case IO_XFER_ERROR_PHY_NOT_READY:
PM8001_IO_DBG(pm8001_ha,
@@ -2526,6 +2530,8 @@ mpi_sata_completion(struct pm8001_hba_info *pm8001_ha, void *piomb)
ts->resp = SAS_TASK_COMPLETE;
ts->stat = SAS_OPEN_REJECT;
ts->open_rej_reason = SAS_OREJ_RSVD_RETRY;
+ if (pm8001_dev)
+ atomic_dec(&pm8001_dev->running_req);
break;
case IO_OPEN_CNX_ERROR_PROTOCOL_NOT_SUPPORTED:
PM8001_IO_DBG(pm8001_ha,
@@ -2534,6 +2540,8 @@ mpi_sata_completion(struct pm8001_hba_info *pm8001_ha, void *piomb)
ts->resp = SAS_TASK_COMPLETE;
ts->stat = SAS_OPEN_REJECT;
ts->open_rej_reason = SAS_OREJ_EPROTO;
+ if (pm8001_dev)
+ atomic_dec(&pm8001_dev->running_req);
break;
case IO_OPEN_CNX_ERROR_ZONE_VIOLATION:
PM8001_IO_DBG(pm8001_ha,
@@ -2541,6 +2549,8 @@ mpi_sata_completion(struct pm8001_hba_info *pm8001_ha, void *piomb)
ts->resp = SAS_TASK_COMPLETE;
ts->stat = SAS_OPEN_REJECT;
ts->open_rej_reason = SAS_OREJ_UNKNOWN;
+ if (pm8001_dev)
+ atomic_dec(&pm8001_dev->running_req);
break;
case IO_OPEN_CNX_ERROR_BREAK:
PM8001_IO_DBG(pm8001_ha,
@@ -2548,6 +2558,8 @@ mpi_sata_completion(struct pm8001_hba_info *pm8001_ha, void *piomb)
ts->resp = SAS_TASK_COMPLETE;
ts->stat = SAS_OPEN_REJECT;
ts->open_rej_reason = SAS_OREJ_RSVD_CONT0;
+ if (pm8001_dev)
+ atomic_dec(&pm8001_dev->running_req);
break;
case IO_OPEN_CNX_ERROR_IT_NEXUS_LOSS:
PM8001_IO_DBG(pm8001_ha,
@@ -2587,6 +2599,8 @@ mpi_sata_completion(struct pm8001_hba_info *pm8001_ha, void *piomb)
ts->resp = SAS_TASK_COMPLETE;
ts->stat = SAS_OPEN_REJECT;
ts->open_rej_reason = SAS_OREJ_CONN_RATE;
+ if (pm8001_dev)
+ atomic_dec(&pm8001_dev->running_req);
break;
case IO_OPEN_CNX_ERROR_STP_RESOURCES_BUSY:
PM8001_IO_DBG(pm8001_ha,
@@ -2610,48 +2624,64 @@ mpi_sata_completion(struct pm8001_hba_info *pm8001_ha, void *piomb)
ts->resp = SAS_TASK_COMPLETE;
ts->stat = SAS_OPEN_REJECT;
ts->open_rej_reason = SAS_OREJ_WRONG_DEST;
+ if (pm8001_dev)
+ atomic_dec(&pm8001_dev->running_req);
break;
case IO_XFER_ERROR_NAK_RECEIVED:
PM8001_IO_DBG(pm8001_ha,
pm8001_printk("IO_XFER_ERROR_NAK_RECEIVED\n"));
ts->resp = SAS_TASK_COMPLETE;
ts->stat = SAS_NAK_R_ERR;
+ if (pm8001_dev)
+ atomic_dec(&pm8001_dev->running_req);
break;
case IO_XFER_ERROR_ACK_NAK_TIMEOUT:
PM8001_IO_DBG(pm8001_ha,
pm8001_printk("IO_XFER_ERROR_ACK_NAK_TIMEOUT\n"));
ts->resp = SAS_TASK_COMPLETE;
ts->stat = SAS_NAK_R_ERR;
+ if (pm8001_dev)
+ atomic_dec(&pm8001_dev->running_req);
break;
case IO_XFER_ERROR_DMA:
PM8001_IO_DBG(pm8001_ha,
pm8001_printk("IO_XFER_ERROR_DMA\n"));
ts->resp = SAS_TASK_COMPLETE;
ts->stat = SAS_ABORTED_TASK;
+ if (pm8001_dev)
+ atomic_dec(&pm8001_dev->running_req);
break;
case IO_XFER_ERROR_SATA_LINK_TIMEOUT:
PM8001_IO_DBG(pm8001_ha,
pm8001_printk("IO_XFER_ERROR_SATA_LINK_TIMEOUT\n"));
ts->resp = SAS_TASK_UNDELIVERED;
ts->stat = SAS_DEV_NO_RESPONSE;
+ if (pm8001_dev)
+ atomic_dec(&pm8001_dev->running_req);
break;
case IO_XFER_ERROR_REJECTED_NCQ_MODE:
PM8001_IO_DBG(pm8001_ha,
pm8001_printk("IO_XFER_ERROR_REJECTED_NCQ_MODE\n"));
ts->resp = SAS_TASK_COMPLETE;
ts->stat = SAS_DATA_UNDERRUN;
+ if (pm8001_dev)
+ atomic_dec(&pm8001_dev->running_req);
break;
case IO_XFER_OPEN_RETRY_TIMEOUT:
PM8001_IO_DBG(pm8001_ha,
pm8001_printk("IO_XFER_OPEN_RETRY_TIMEOUT\n"));
ts->resp = SAS_TASK_COMPLETE;
ts->stat = SAS_OPEN_TO;
+ if (pm8001_dev)
+ atomic_dec(&pm8001_dev->running_req);
break;
case IO_PORT_IN_RESET:
PM8001_IO_DBG(pm8001_ha,
pm8001_printk("IO_PORT_IN_RESET\n"));
ts->resp = SAS_TASK_COMPLETE;
ts->stat = SAS_DEV_NO_RESPONSE;
+ if (pm8001_dev)
+ atomic_dec(&pm8001_dev->running_req);
break;
case IO_DS_NON_OPERATIONAL:
PM8001_IO_DBG(pm8001_ha,
@@ -2672,6 +2702,8 @@ mpi_sata_completion(struct pm8001_hba_info *pm8001_ha, void *piomb)
pm8001_printk(" IO_DS_IN_RECOVERY\n"));
ts->resp = SAS_TASK_COMPLETE;
ts->stat = SAS_DEV_NO_RESPONSE;
+ if (pm8001_dev)
+ atomic_dec(&pm8001_dev->running_req);
break;
case IO_DS_IN_ERROR:
PM8001_IO_DBG(pm8001_ha,
@@ -2693,6 +2725,8 @@ mpi_sata_completion(struct pm8001_hba_info *pm8001_ha, void *piomb)
ts->resp = SAS_TASK_COMPLETE;
ts->stat = SAS_OPEN_REJECT;
ts->open_rej_reason = SAS_OREJ_RSVD_RETRY;
+ if (pm8001_dev)
+ atomic_dec(&pm8001_dev->running_req);
break;
default:
PM8001_DEVIO_DBG(pm8001_ha,
@@ -2700,6 +2734,8 @@ mpi_sata_completion(struct pm8001_hba_info *pm8001_ha, void *piomb)
/* not allowed case. Therefore, return failed status */
ts->resp = SAS_TASK_COMPLETE;
ts->stat = SAS_DEV_NO_RESPONSE;
+ if (pm8001_dev)
+ atomic_dec(&pm8001_dev->running_req);
break;
}
spin_lock_irqsave(&t->task_state_lock, flags);
@@ -2776,7 +2812,7 @@ static void mpi_sata_event(struct pm8001_hba_info *pm8001_ha , void *piomb)
ts->stat = SAS_DATA_OVERRUN;
ts->residual = 0;
if (pm8001_dev)
- pm8001_dev->running_req--;
+ atomic_dec(&pm8001_dev->running_req);
break;
case IO_XFER_ERROR_BREAK:
PM8001_IO_DBG(pm8001_ha,
@@ -2976,7 +3012,7 @@ mpi_smp_completion(struct pm8001_hba_info *pm8001_ha, void *piomb)
ts->resp = SAS_TASK_COMPLETE;
ts->stat = SAM_STAT_GOOD;
if (pm8001_dev)
- pm8001_dev->running_req--;
+ atomic_dec(&pm8001_dev->running_req);
break;
case IO_ABORTED:
PM8001_IO_DBG(pm8001_ha,
@@ -2984,7 +3020,7 @@ mpi_smp_completion(struct pm8001_hba_info *pm8001_ha, void *piomb)
ts->resp = SAS_TASK_COMPLETE;
ts->stat = SAS_ABORTED_TASK;
if (pm8001_dev)
- pm8001_dev->running_req--;
+ atomic_dec(&pm8001_dev->running_req);
break;
case IO_OVERFLOW:
PM8001_IO_DBG(pm8001_ha, pm8001_printk("IO_UNDERFLOW\n"));
@@ -2992,7 +3028,7 @@ mpi_smp_completion(struct pm8001_hba_info *pm8001_ha, void *piomb)
ts->stat = SAS_DATA_OVERRUN;
ts->residual = 0;
if (pm8001_dev)
- pm8001_dev->running_req--;
+ atomic_dec(&pm8001_dev->running_req);
break;
case IO_NO_DEVICE:
PM8001_IO_DBG(pm8001_ha, pm8001_printk("IO_NO_DEVICE\n"));
diff --git a/drivers/scsi/pm8001/pm8001_init.c b/drivers/scsi/pm8001/pm8001_init.c
index 2d9ddc444bf5..0d9056083d53 100644
--- a/drivers/scsi/pm8001/pm8001_init.c
+++ b/drivers/scsi/pm8001/pm8001_init.c
@@ -412,7 +412,7 @@ static int pm8001_alloc(struct pm8001_hba_info *pm8001_ha,
pm8001_ha->devices[i].dev_type = SAS_PHY_UNUSED;
pm8001_ha->devices[i].id = i;
pm8001_ha->devices[i].device_id = PM8001_MAX_DEVICES;
- pm8001_ha->devices[i].running_req = 0;
+ atomic_set(&pm8001_ha->devices[i].running_req, 0);
}
pm8001_ha->flags = PM8001F_INIT_TIME;
/* Initialize tags */
diff --git a/drivers/scsi/pm8001/pm8001_sas.c b/drivers/scsi/pm8001/pm8001_sas.c
index 9889bab7d31c..d6e0bc588698 100644
--- a/drivers/scsi/pm8001/pm8001_sas.c
+++ b/drivers/scsi/pm8001/pm8001_sas.c
@@ -456,9 +456,11 @@ static int pm8001_task_exec(struct sas_task *task,
ccb->device = pm8001_dev;
switch (task_proto) {
case SAS_PROTOCOL_SMP:
+ atomic_inc(&pm8001_dev->running_req);
rc = pm8001_task_prep_smp(pm8001_ha, ccb);
break;
case SAS_PROTOCOL_SSP:
+ atomic_inc(&pm8001_dev->running_req);
if (is_tmf)
rc = pm8001_task_prep_ssp_tm(pm8001_ha,
ccb, tmf);
@@ -467,6 +469,7 @@ static int pm8001_task_exec(struct sas_task *task,
break;
case SAS_PROTOCOL_SATA:
case SAS_PROTOCOL_STP:
+ atomic_inc(&pm8001_dev->running_req);
rc = pm8001_task_prep_ata(pm8001_ha, ccb);
break;
default:
@@ -479,13 +482,13 @@ static int pm8001_task_exec(struct sas_task *task,
if (rc) {
PM8001_IO_DBG(pm8001_ha,
pm8001_printk("rc is %x\n", rc));
+ atomic_dec(&pm8001_dev->running_req);
goto err_out_tag;
}
/* TODO: select normal or high priority */
spin_lock(&t->task_state_lock);
t->task_state_flags |= SAS_TASK_AT_INITIATOR;
spin_unlock(&t->task_state_lock);
- pm8001_dev->running_req++;
} while (0);
rc = 0;
goto out_done;
@@ -886,11 +889,11 @@ static void pm8001_dev_gone_notify(struct domain_device *dev)
PM8001_DISC_DBG(pm8001_ha,
pm8001_printk("found dev[%d:%x] is gone.\n",
pm8001_dev->device_id, pm8001_dev->dev_type));
- if (pm8001_dev->running_req) {
+ if (atomic_read(&pm8001_dev->running_req)) {
spin_unlock_irqrestore(&pm8001_ha->lock, flags);
pm8001_exec_internal_task_abort(pm8001_ha, pm8001_dev ,
dev, 1, 0);
- while (pm8001_dev->running_req)
+ while (atomic_read(&pm8001_dev->running_req))
msleep(20);
spin_lock_irqsave(&pm8001_ha->lock, flags);
}
@@ -968,7 +971,7 @@ void pm8001_open_reject_retry(
ts->stat = SAS_OPEN_REJECT;
ts->open_rej_reason = SAS_OREJ_RSVD_RETRY;
if (pm8001_dev)
- pm8001_dev->running_req--;
+ atomic_dec(&pm8001_dev->running_req);
spin_lock_irqsave(&task->task_state_lock, flags1);
task->task_state_flags &= ~SAS_TASK_STATE_PENDING;
task->task_state_flags &= ~SAS_TASK_AT_INITIATOR;
diff --git a/drivers/scsi/pm8001/pm8001_sas.h b/drivers/scsi/pm8001/pm8001_sas.h
index 95663e138083..091574721ea1 100644
--- a/drivers/scsi/pm8001/pm8001_sas.h
+++ b/drivers/scsi/pm8001/pm8001_sas.h
@@ -293,7 +293,7 @@ struct pm8001_device {
struct completion *dcompletion;
struct completion *setds_completion;
u32 device_id;
- u32 running_req;
+ atomic_t running_req;
};
struct pm8001_prd_imt {
diff --git a/drivers/scsi/pm8001/pm80xx_hwi.c b/drivers/scsi/pm8001/pm80xx_hwi.c
index 5fe50e0effcd..1ba93fb76093 100644
--- a/drivers/scsi/pm8001/pm80xx_hwi.c
+++ b/drivers/scsi/pm8001/pm80xx_hwi.c
@@ -1960,13 +1960,15 @@ mpi_ssp_completion(struct pm8001_hba_info *pm8001_ha , void *piomb)
sas_ssp_task_response(pm8001_ha->dev, t, iu);
}
if (pm8001_dev)
- pm8001_dev->running_req--;
+ atomic_dec(&pm8001_dev->running_req);
break;
case IO_ABORTED:
PM8001_IO_DBG(pm8001_ha,
pm8001_printk("IO_ABORTED IOMB Tag\n"));
ts->resp = SAS_TASK_COMPLETE;
ts->stat = SAS_ABORTED_TASK;
+ if (pm8001_dev)
+ atomic_dec(&pm8001_dev->running_req);
break;
case IO_UNDERFLOW:
/* SSP Completion with error */
@@ -1977,13 +1979,15 @@ mpi_ssp_completion(struct pm8001_hba_info *pm8001_ha , void *piomb)
ts->stat = SAS_DATA_UNDERRUN;
ts->residual = param;
if (pm8001_dev)
- pm8001_dev->running_req--;
+ atomic_dec(&pm8001_dev->running_req);
break;
case IO_NO_DEVICE:
PM8001_IO_DBG(pm8001_ha,
pm8001_printk("IO_NO_DEVICE\n"));
ts->resp = SAS_TASK_UNDELIVERED;
ts->stat = SAS_PHY_DOWN;
+ if (pm8001_dev)
+ atomic_dec(&pm8001_dev->running_req);
break;
case IO_XFER_ERROR_BREAK:
PM8001_IO_DBG(pm8001_ha,
@@ -1992,6 +1996,8 @@ mpi_ssp_completion(struct pm8001_hba_info *pm8001_ha , void *piomb)
ts->stat = SAS_OPEN_REJECT;
/* Force the midlayer to retry */
ts->open_rej_reason = SAS_OREJ_RSVD_RETRY;
+ if (pm8001_dev)
+ atomic_dec(&pm8001_dev->running_req);
break;
case IO_XFER_ERROR_PHY_NOT_READY:
PM8001_IO_DBG(pm8001_ha,
@@ -1999,6 +2005,8 @@ mpi_ssp_completion(struct pm8001_hba_info *pm8001_ha , void *piomb)
ts->resp = SAS_TASK_COMPLETE;
ts->stat = SAS_OPEN_REJECT;
ts->open_rej_reason = SAS_OREJ_RSVD_RETRY;
+ if (pm8001_dev)
+ atomic_dec(&pm8001_dev->running_req);
break;
case IO_XFER_ERROR_INVALID_SSP_RSP_FRAME:
PM8001_IO_DBG(pm8001_ha,
@@ -2006,6 +2014,8 @@ mpi_ssp_completion(struct pm8001_hba_info *pm8001_ha , void *piomb)
ts->resp = SAS_TASK_COMPLETE;
ts->stat = SAS_OPEN_REJECT;
ts->open_rej_reason = SAS_OREJ_RSVD_RETRY;
+ if (pm8001_dev)
+ atomic_dec(&pm8001_dev->running_req);
break;
case IO_OPEN_CNX_ERROR_PROTOCOL_NOT_SUPPORTED:
PM8001_IO_DBG(pm8001_ha,
@@ -2013,6 +2023,8 @@ mpi_ssp_completion(struct pm8001_hba_info *pm8001_ha , void *piomb)
ts->resp = SAS_TASK_COMPLETE;
ts->stat = SAS_OPEN_REJECT;
ts->open_rej_reason = SAS_OREJ_EPROTO;
+ if (pm8001_dev)
+ atomic_dec(&pm8001_dev->running_req);
break;
case IO_OPEN_CNX_ERROR_ZONE_VIOLATION:
PM8001_IO_DBG(pm8001_ha,
@@ -2020,6 +2032,8 @@ mpi_ssp_completion(struct pm8001_hba_info *pm8001_ha , void *piomb)
ts->resp = SAS_TASK_COMPLETE;
ts->stat = SAS_OPEN_REJECT;
ts->open_rej_reason = SAS_OREJ_UNKNOWN;
+ if (pm8001_dev)
+ atomic_dec(&pm8001_dev->running_req);
break;
case IO_OPEN_CNX_ERROR_BREAK:
PM8001_IO_DBG(pm8001_ha,
@@ -2027,6 +2041,8 @@ mpi_ssp_completion(struct pm8001_hba_info *pm8001_ha , void *piomb)
ts->resp = SAS_TASK_COMPLETE;
ts->stat = SAS_OPEN_REJECT;
ts->open_rej_reason = SAS_OREJ_RSVD_RETRY;
+ if (pm8001_dev)
+ atomic_dec(&pm8001_dev->running_req);
break;
case IO_OPEN_CNX_ERROR_IT_NEXUS_LOSS:
case IO_XFER_OPEN_RETRY_BACKOFF_THRESHOLD_REACHED:
@@ -2050,6 +2066,8 @@ mpi_ssp_completion(struct pm8001_hba_info *pm8001_ha , void *piomb)
ts->resp = SAS_TASK_COMPLETE;
ts->stat = SAS_OPEN_REJECT;
ts->open_rej_reason = SAS_OREJ_BAD_DEST;
+ if (pm8001_dev)
+ atomic_dec(&pm8001_dev->running_req);
break;
case IO_OPEN_CNX_ERROR_CONNECTION_RATE_NOT_SUPPORTED:
PM8001_IO_DBG(pm8001_ha, pm8001_printk(
@@ -2057,6 +2075,8 @@ mpi_ssp_completion(struct pm8001_hba_info *pm8001_ha , void *piomb)
ts->resp = SAS_TASK_COMPLETE;
ts->stat = SAS_OPEN_REJECT;
ts->open_rej_reason = SAS_OREJ_CONN_RATE;
+ if (pm8001_dev)
+ atomic_dec(&pm8001_dev->running_req);
break;
case IO_OPEN_CNX_ERROR_WRONG_DESTINATION:
PM8001_IO_DBG(pm8001_ha,
@@ -2064,6 +2084,8 @@ mpi_ssp_completion(struct pm8001_hba_info *pm8001_ha , void *piomb)
ts->resp = SAS_TASK_UNDELIVERED;
ts->stat = SAS_OPEN_REJECT;
ts->open_rej_reason = SAS_OREJ_WRONG_DEST;
+ if (pm8001_dev)
+ atomic_dec(&pm8001_dev->running_req);
break;
case IO_XFER_ERROR_NAK_RECEIVED:
PM8001_IO_DBG(pm8001_ha,
@@ -2071,18 +2093,24 @@ mpi_ssp_completion(struct pm8001_hba_info *pm8001_ha , void *piomb)
ts->resp = SAS_TASK_COMPLETE;
ts->stat = SAS_OPEN_REJECT;
ts->open_rej_reason = SAS_OREJ_RSVD_RETRY;
+ if (pm8001_dev)
+ atomic_dec(&pm8001_dev->running_req);
break;
case IO_XFER_ERROR_ACK_NAK_TIMEOUT:
PM8001_IO_DBG(pm8001_ha,
pm8001_printk("IO_XFER_ERROR_ACK_NAK_TIMEOUT\n"));
ts->resp = SAS_TASK_COMPLETE;
ts->stat = SAS_NAK_R_ERR;
+ if (pm8001_dev)
+ atomic_dec(&pm8001_dev->running_req);
break;
case IO_XFER_ERROR_DMA:
PM8001_IO_DBG(pm8001_ha,
pm8001_printk("IO_XFER_ERROR_DMA\n"));
ts->resp = SAS_TASK_COMPLETE;
ts->stat = SAS_OPEN_REJECT;
+ if (pm8001_dev)
+ atomic_dec(&pm8001_dev->running_req);
break;
case IO_XFER_OPEN_RETRY_TIMEOUT:
PM8001_IO_DBG(pm8001_ha,
@@ -2090,18 +2118,24 @@ mpi_ssp_completion(struct pm8001_hba_info *pm8001_ha , void *piomb)
ts->resp = SAS_TASK_COMPLETE;
ts->stat = SAS_OPEN_REJECT;
ts->open_rej_reason = SAS_OREJ_RSVD_RETRY;
+ if (pm8001_dev)
+ atomic_dec(&pm8001_dev->running_req);
break;
case IO_XFER_ERROR_OFFSET_MISMATCH:
PM8001_IO_DBG(pm8001_ha,
pm8001_printk("IO_XFER_ERROR_OFFSET_MISMATCH\n"));
ts->resp = SAS_TASK_COMPLETE;
ts->stat = SAS_OPEN_REJECT;
+ if (pm8001_dev)
+ atomic_dec(&pm8001_dev->running_req);
break;
case IO_PORT_IN_RESET:
PM8001_IO_DBG(pm8001_ha,
pm8001_printk("IO_PORT_IN_RESET\n"));
ts->resp = SAS_TASK_COMPLETE;
ts->stat = SAS_OPEN_REJECT;
+ if (pm8001_dev)
+ atomic_dec(&pm8001_dev->running_req);
break;
case IO_DS_NON_OPERATIONAL:
PM8001_IO_DBG(pm8001_ha,
@@ -2118,18 +2152,24 @@ mpi_ssp_completion(struct pm8001_hba_info *pm8001_ha , void *piomb)
pm8001_printk("IO_DS_IN_RECOVERY\n"));
ts->resp = SAS_TASK_COMPLETE;
ts->stat = SAS_OPEN_REJECT;
+ if (pm8001_dev)
+ atomic_dec(&pm8001_dev->running_req);
break;
case IO_TM_TAG_NOT_FOUND:
PM8001_IO_DBG(pm8001_ha,
pm8001_printk("IO_TM_TAG_NOT_FOUND\n"));
ts->resp = SAS_TASK_COMPLETE;
ts->stat = SAS_OPEN_REJECT;
+ if (pm8001_dev)
+ atomic_dec(&pm8001_dev->running_req);
break;
case IO_SSP_EXT_IU_ZERO_LEN_ERROR:
PM8001_IO_DBG(pm8001_ha,
pm8001_printk("IO_SSP_EXT_IU_ZERO_LEN_ERROR\n"));
ts->resp = SAS_TASK_COMPLETE;
ts->stat = SAS_OPEN_REJECT;
+ if (pm8001_dev)
+ atomic_dec(&pm8001_dev->running_req);
break;
case IO_OPEN_CNX_ERROR_HW_RESOURCE_BUSY:
PM8001_IO_DBG(pm8001_ha,
@@ -2137,6 +2177,8 @@ mpi_ssp_completion(struct pm8001_hba_info *pm8001_ha , void *piomb)
ts->resp = SAS_TASK_COMPLETE;
ts->stat = SAS_OPEN_REJECT;
ts->open_rej_reason = SAS_OREJ_RSVD_RETRY;
+ if (pm8001_dev)
+ atomic_dec(&pm8001_dev->running_req);
break;
default:
PM8001_DEVIO_DBG(pm8001_ha,
@@ -2144,6 +2186,8 @@ mpi_ssp_completion(struct pm8001_hba_info *pm8001_ha , void *piomb)
/* not allowed case. Therefore, return failed status */
ts->resp = SAS_TASK_COMPLETE;
ts->stat = SAS_OPEN_REJECT;
+ if (pm8001_dev)
+ atomic_dec(&pm8001_dev->running_req);
break;
}
PM8001_IO_DBG(pm8001_ha,
@@ -2203,7 +2247,7 @@ static void mpi_ssp_event(struct pm8001_hba_info *pm8001_ha , void *piomb)
ts->stat = SAS_DATA_OVERRUN;
ts->residual = 0;
if (pm8001_dev)
- pm8001_dev->running_req--;
+ atomic_dec(&pm8001_dev->running_req);
break;
case IO_XFER_ERROR_BREAK:
PM8001_IO_DBG(pm8001_ha,
@@ -2528,7 +2572,7 @@ mpi_sata_completion(struct pm8001_hba_info *pm8001_ha, void *piomb)
pm8001_printk("response too large\n"));
}
if (pm8001_dev)
- pm8001_dev->running_req--;
+ atomic_dec(&pm8001_dev->running_req);
break;
case IO_ABORTED:
PM8001_IO_DBG(pm8001_ha,
@@ -2536,7 +2580,7 @@ mpi_sata_completion(struct pm8001_hba_info *pm8001_ha, void *piomb)
ts->resp = SAS_TASK_COMPLETE;
ts->stat = SAS_ABORTED_TASK;
if (pm8001_dev)
- pm8001_dev->running_req--;
+ atomic_dec(&pm8001_dev->running_req);
break;
/* following cases are to do cases */
case IO_UNDERFLOW:
@@ -2547,19 +2591,23 @@ mpi_sata_completion(struct pm8001_hba_info *pm8001_ha, void *piomb)
ts->stat = SAS_DATA_UNDERRUN;
ts->residual = param;
if (pm8001_dev)
- pm8001_dev->running_req--;
+ atomic_dec(&pm8001_dev->running_req);
break;
case IO_NO_DEVICE:
PM8001_IO_DBG(pm8001_ha,
pm8001_printk("IO_NO_DEVICE\n"));
ts->resp = SAS_TASK_UNDELIVERED;
ts->stat = SAS_PHY_DOWN;
+ if (pm8001_dev)
+ atomic_dec(&pm8001_dev->running_req);
break;
case IO_XFER_ERROR_BREAK:
PM8001_IO_DBG(pm8001_ha,
pm8001_printk("IO_XFER_ERROR_BREAK\n"));
ts->resp = SAS_TASK_COMPLETE;
ts->stat = SAS_INTERRUPTED;
+ if (pm8001_dev)
+ atomic_dec(&pm8001_dev->running_req);
break;
case IO_XFER_ERROR_PHY_NOT_READY:
PM8001_IO_DBG(pm8001_ha,
@@ -2567,6 +2615,8 @@ mpi_sata_completion(struct pm8001_hba_info *pm8001_ha, void *piomb)
ts->resp = SAS_TASK_COMPLETE;
ts->stat = SAS_OPEN_REJECT;
ts->open_rej_reason = SAS_OREJ_RSVD_RETRY;
+ if (pm8001_dev)
+ atomic_dec(&pm8001_dev->running_req);
break;
case IO_OPEN_CNX_ERROR_PROTOCOL_NOT_SUPPORTED:
PM8001_IO_DBG(pm8001_ha, pm8001_printk(
@@ -2574,6 +2624,8 @@ mpi_sata_completion(struct pm8001_hba_info *pm8001_ha, void *piomb)
ts->resp = SAS_TASK_COMPLETE;
ts->stat = SAS_OPEN_REJECT;
ts->open_rej_reason = SAS_OREJ_EPROTO;
+ if (pm8001_dev)
+ atomic_dec(&pm8001_dev->running_req);
break;
case IO_OPEN_CNX_ERROR_ZONE_VIOLATION:
PM8001_IO_DBG(pm8001_ha,
@@ -2581,6 +2633,8 @@ mpi_sata_completion(struct pm8001_hba_info *pm8001_ha, void *piomb)
ts->resp = SAS_TASK_COMPLETE;
ts->stat = SAS_OPEN_REJECT;
ts->open_rej_reason = SAS_OREJ_UNKNOWN;
+ if (pm8001_dev)
+ atomic_dec(&pm8001_dev->running_req);
break;
case IO_OPEN_CNX_ERROR_BREAK:
PM8001_IO_DBG(pm8001_ha,
@@ -2588,6 +2642,8 @@ mpi_sata_completion(struct pm8001_hba_info *pm8001_ha, void *piomb)
ts->resp = SAS_TASK_COMPLETE;
ts->stat = SAS_OPEN_REJECT;
ts->open_rej_reason = SAS_OREJ_RSVD_CONT0;
+ if (pm8001_dev)
+ atomic_dec(&pm8001_dev->running_req);
break;
case IO_OPEN_CNX_ERROR_IT_NEXUS_LOSS:
case IO_XFER_OPEN_RETRY_BACKOFF_THRESHOLD_REACHED:
@@ -2631,6 +2687,8 @@ mpi_sata_completion(struct pm8001_hba_info *pm8001_ha, void *piomb)
ts->resp = SAS_TASK_COMPLETE;
ts->stat = SAS_OPEN_REJECT;
ts->open_rej_reason = SAS_OREJ_CONN_RATE;
+ if (pm8001_dev)
+ atomic_dec(&pm8001_dev->running_req);
break;
case IO_OPEN_CNX_ERROR_STP_RESOURCES_BUSY:
PM8001_IO_DBG(pm8001_ha, pm8001_printk(
@@ -2653,48 +2711,64 @@ mpi_sata_completion(struct pm8001_hba_info *pm8001_ha, void *piomb)
ts->resp = SAS_TASK_COMPLETE;
ts->stat = SAS_OPEN_REJECT;
ts->open_rej_reason = SAS_OREJ_WRONG_DEST;
+ if (pm8001_dev)
+ atomic_dec(&pm8001_dev->running_req);
break;
case IO_XFER_ERROR_NAK_RECEIVED:
PM8001_IO_DBG(pm8001_ha,
pm8001_printk("IO_XFER_ERROR_NAK_RECEIVED\n"));
ts->resp = SAS_TASK_COMPLETE;
ts->stat = SAS_NAK_R_ERR;
+ if (pm8001_dev)
+ atomic_dec(&pm8001_dev->running_req);
break;
case IO_XFER_ERROR_ACK_NAK_TIMEOUT:
PM8001_IO_DBG(pm8001_ha,
pm8001_printk("IO_XFER_ERROR_ACK_NAK_TIMEOUT\n"));
ts->resp = SAS_TASK_COMPLETE;
ts->stat = SAS_NAK_R_ERR;
+ if (pm8001_dev)
+ atomic_dec(&pm8001_dev->running_req);
break;
case IO_XFER_ERROR_DMA:
PM8001_IO_DBG(pm8001_ha,
pm8001_printk("IO_XFER_ERROR_DMA\n"));
ts->resp = SAS_TASK_COMPLETE;
ts->stat = SAS_ABORTED_TASK;
+ if (pm8001_dev)
+ atomic_dec(&pm8001_dev->running_req);
break;
case IO_XFER_ERROR_SATA_LINK_TIMEOUT:
PM8001_IO_DBG(pm8001_ha,
pm8001_printk("IO_XFER_ERROR_SATA_LINK_TIMEOUT\n"));
ts->resp = SAS_TASK_UNDELIVERED;
ts->stat = SAS_DEV_NO_RESPONSE;
+ if (pm8001_dev)
+ atomic_dec(&pm8001_dev->running_req);
break;
case IO_XFER_ERROR_REJECTED_NCQ_MODE:
PM8001_IO_DBG(pm8001_ha,
pm8001_printk("IO_XFER_ERROR_REJECTED_NCQ_MODE\n"));
ts->resp = SAS_TASK_COMPLETE;
ts->stat = SAS_DATA_UNDERRUN;
+ if (pm8001_dev)
+ atomic_dec(&pm8001_dev->running_req);
break;
case IO_XFER_OPEN_RETRY_TIMEOUT:
PM8001_IO_DBG(pm8001_ha,
pm8001_printk("IO_XFER_OPEN_RETRY_TIMEOUT\n"));
ts->resp = SAS_TASK_COMPLETE;
ts->stat = SAS_OPEN_TO;
+ if (pm8001_dev)
+ atomic_dec(&pm8001_dev->running_req);
break;
case IO_PORT_IN_RESET:
PM8001_IO_DBG(pm8001_ha,
pm8001_printk("IO_PORT_IN_RESET\n"));
ts->resp = SAS_TASK_COMPLETE;
ts->stat = SAS_DEV_NO_RESPONSE;
+ if (pm8001_dev)
+ atomic_dec(&pm8001_dev->running_req);
break;
case IO_DS_NON_OPERATIONAL:
PM8001_IO_DBG(pm8001_ha,
@@ -2715,6 +2789,8 @@ mpi_sata_completion(struct pm8001_hba_info *pm8001_ha, void *piomb)
pm8001_printk("IO_DS_IN_RECOVERY\n"));
ts->resp = SAS_TASK_COMPLETE;
ts->stat = SAS_DEV_NO_RESPONSE;
+ if (pm8001_dev)
+ atomic_dec(&pm8001_dev->running_req);
break;
case IO_DS_IN_ERROR:
PM8001_IO_DBG(pm8001_ha,
@@ -2736,6 +2812,8 @@ mpi_sata_completion(struct pm8001_hba_info *pm8001_ha, void *piomb)
ts->resp = SAS_TASK_COMPLETE;
ts->stat = SAS_OPEN_REJECT;
ts->open_rej_reason = SAS_OREJ_RSVD_RETRY;
+ if (pm8001_dev)
+ atomic_dec(&pm8001_dev->running_req);
break;
default:
PM8001_DEVIO_DBG(pm8001_ha,
@@ -2743,6 +2821,8 @@ mpi_sata_completion(struct pm8001_hba_info *pm8001_ha, void *piomb)
/* not allowed case. Therefore, return failed status */
ts->resp = SAS_TASK_COMPLETE;
ts->stat = SAS_DEV_NO_RESPONSE;
+ if (pm8001_dev)
+ atomic_dec(&pm8001_dev->running_req);
break;
}
spin_lock_irqsave(&t->task_state_lock, flags);
@@ -2820,7 +2900,7 @@ static void mpi_sata_event(struct pm8001_hba_info *pm8001_ha , void *piomb)
ts->stat = SAS_DATA_OVERRUN;
ts->residual = 0;
if (pm8001_dev)
- pm8001_dev->running_req--;
+ atomic_dec(&pm8001_dev->running_req);
break;
case IO_XFER_ERROR_BREAK:
PM8001_IO_DBG(pm8001_ha,
@@ -3040,7 +3120,7 @@ mpi_smp_completion(struct pm8001_hba_info *pm8001_ha, void *piomb)
ts->resp = SAS_TASK_COMPLETE;
ts->stat = SAM_STAT_GOOD;
if (pm8001_dev)
- pm8001_dev->running_req--;
+ atomic_dec(&pm8001_dev->running_req);
if (pm8001_ha->smp_exp_mode == SMP_DIRECT) {
PM8001_IO_DBG(pm8001_ha,
pm8001_printk("DIRECT RESPONSE Length:%d\n",
@@ -3063,7 +3143,7 @@ mpi_smp_completion(struct pm8001_hba_info *pm8001_ha, void *piomb)
ts->resp = SAS_TASK_COMPLETE;
ts->stat = SAS_ABORTED_TASK;
if (pm8001_dev)
- pm8001_dev->running_req--;
+ atomic_dec(&pm8001_dev->running_req);
break;
case IO_OVERFLOW:
PM8001_IO_DBG(pm8001_ha, pm8001_printk("IO_UNDERFLOW\n"));
@@ -3071,7 +3151,7 @@ mpi_smp_completion(struct pm8001_hba_info *pm8001_ha, void *piomb)
ts->stat = SAS_DATA_OVERRUN;
ts->residual = 0;
if (pm8001_dev)
- pm8001_dev->running_req--;
+ atomic_dec(&pm8001_dev->running_req);
break;
case IO_NO_DEVICE:
PM8001_IO_DBG(pm8001_ha, pm8001_printk("IO_NO_DEVICE\n"));
@@ -4809,6 +4889,7 @@ static int pm80xx_chip_sata_req(struct pm8001_hba_info *pm8001_ha,
flags);
pm8001_ccb_task_free_done(pm8001_ha, task,
ccb, tag);
+ atomic_dec(&pm8001_ha_dev->running_req);
return 0;
}
}
--
2.16.3
^ permalink raw reply related [flat|nested] 6+ messages in thread
* [PATCH 3/4] pm80xx: Avoid busywait in FW ready check
2020-10-12 5:24 [PATCH 0/4] pm80xx updates Viswas G
2020-10-12 5:24 ` [PATCH 1/4] pm80xx: make mpi_build_cmd locking consistent Viswas G
2020-10-12 5:24 ` [PATCH 2/4] pm80xx: make running_req atomic Viswas G
@ 2020-10-12 5:24 ` Viswas G
2020-10-12 5:24 ` [PATCH 4/4] pm80xx: make pm8001_mpi_set_nvmd_resp free of race condition Viswas G
3 siblings, 0 replies; 6+ messages in thread
From: Viswas G @ 2020-10-12 5:24 UTC (permalink / raw)
To: linux-scsi
Cc: Vasanthalakshmi.Tharmarajan, Ruksar Devadi, Viswas.G,
peter chang --cc=yuuzheng @ google . com, vishakhavc, radha,
akshatzen
From: akshatzen <akshatzen@google.com>
Today in function check_fw_ready we do busy wait using udelay. Due to
which CPU is not released and we see CPU need_resched failures.
Here busy waiting is not necessary since we are in process context and
we should sleep instead. So to avoid busy waiting we are replacing
udelay with msleep of 20 ms intervals to check for FW to become ready.
It's verified that check_fw_ready today is not being used in interrupt
context anywhere, hence it is safe to make this change.
Tested:
Installed the kernel and looked at dmesg for failures pertaining to
need_resched and did not find them.
Signed-off-by: akshatzen <akshatzen@google.com>
Signed-off-by: Viswas G <Viswas.G@microchip.com>
Signed-off-by: Ruksar Devadi <Ruksar.devadi@microchip.com>
Signed-off-by: Radha Ramachandran <radha@google.com>
---
drivers/scsi/pm8001/pm80xx_hwi.c | 21 +++++++++++----------
drivers/scsi/pm8001/pm80xx_hwi.h | 6 ++++++
2 files changed, 17 insertions(+), 10 deletions(-)
diff --git a/drivers/scsi/pm8001/pm80xx_hwi.c b/drivers/scsi/pm8001/pm80xx_hwi.c
index 1ba93fb76093..24a4f6b9e79d 100644
--- a/drivers/scsi/pm8001/pm80xx_hwi.c
+++ b/drivers/scsi/pm8001/pm80xx_hwi.c
@@ -1042,6 +1042,7 @@ static int mpi_init_check(struct pm8001_hba_info *pm8001_ha)
/**
* check_fw_ready - The LLDD check if the FW is ready, if not, return error.
+ * This function sleeps hence it must not be used in atomic context.
* @pm8001_ha: our hba card information
*/
static int check_fw_ready(struct pm8001_hba_info *pm8001_ha)
@@ -1052,16 +1053,16 @@ static int check_fw_ready(struct pm8001_hba_info *pm8001_ha)
int ret = 0;
/* reset / PCIe ready */
- max_wait_time = max_wait_count = 100 * 1000; /* 100 milli sec */
+ max_wait_time = max_wait_count = 5; /* 100 milli sec */
do {
- udelay(1);
+ msleep(FW_READY_INTERVAL);
value = pm8001_cr32(pm8001_ha, 0, MSGU_SCRATCH_PAD_1);
} while ((value == 0xFFFFFFFF) && (--max_wait_count));
/* check ila status */
- max_wait_time = max_wait_count = 1000 * 1000; /* 1000 milli sec */
+ max_wait_time = max_wait_count = 50; /* 1000 milli sec */
do {
- udelay(1);
+ msleep(FW_READY_INTERVAL);
value = pm8001_cr32(pm8001_ha, 0, MSGU_SCRATCH_PAD_1);
} while (((value & SCRATCH_PAD_ILA_READY) !=
SCRATCH_PAD_ILA_READY) && (--max_wait_count));
@@ -1074,9 +1075,9 @@ static int check_fw_ready(struct pm8001_hba_info *pm8001_ha)
}
/* check RAAE status */
- max_wait_time = max_wait_count = 1800 * 1000; /* 1800 milli sec */
+ max_wait_time = max_wait_count = 90; /* 1800 milli sec */
do {
- udelay(1);
+ msleep(FW_READY_INTERVAL);
value = pm8001_cr32(pm8001_ha, 0, MSGU_SCRATCH_PAD_1);
} while (((value & SCRATCH_PAD_RAAE_READY) !=
SCRATCH_PAD_RAAE_READY) && (--max_wait_count));
@@ -1089,9 +1090,9 @@ static int check_fw_ready(struct pm8001_hba_info *pm8001_ha)
}
/* check iop0 status */
- max_wait_time = max_wait_count = 600 * 1000; /* 600 milli sec */
+ max_wait_time = max_wait_count = 30; /* 600 milli sec */
do {
- udelay(1);
+ msleep(FW_READY_INTERVAL);
value = pm8001_cr32(pm8001_ha, 0, MSGU_SCRATCH_PAD_1);
} while (((value & SCRATCH_PAD_IOP0_READY) != SCRATCH_PAD_IOP0_READY) &&
(--max_wait_count));
@@ -1107,9 +1108,9 @@ static int check_fw_ready(struct pm8001_hba_info *pm8001_ha)
if ((pm8001_ha->chip_id != chip_8008) &&
(pm8001_ha->chip_id != chip_8009)) {
/* 200 milli sec */
- max_wait_time = max_wait_count = 200 * 1000;
+ max_wait_time = max_wait_count = 10;
do {
- udelay(1);
+ msleep(FW_READY_INTERVAL);
value = pm8001_cr32(pm8001_ha, 0, MSGU_SCRATCH_PAD_1);
} while (((value & SCRATCH_PAD_IOP1_READY) !=
SCRATCH_PAD_IOP1_READY) && (--max_wait_count));
diff --git a/drivers/scsi/pm8001/pm80xx_hwi.h b/drivers/scsi/pm8001/pm80xx_hwi.h
index 701951a0f715..ec48bc276de6 100644
--- a/drivers/scsi/pm8001/pm80xx_hwi.h
+++ b/drivers/scsi/pm8001/pm80xx_hwi.h
@@ -1639,3 +1639,9 @@ typedef struct SASProtocolTimerConfig SASProtocolTimerConfig_t;
#define MEMBASE_II_SHIFT_REGISTER 0x1010
#endif
+
+/**
+ * As we know sleep (1~20) ms may result in sleep longer than ~20 ms, hence we
+ * choose 20 ms interval.
+ */
+#define FW_READY_INTERVAL 20
--
2.16.3
^ permalink raw reply related [flat|nested] 6+ messages in thread
* [PATCH 4/4] pm80xx: make pm8001_mpi_set_nvmd_resp free of race condition
2020-10-12 5:24 [PATCH 0/4] pm80xx updates Viswas G
` (2 preceding siblings ...)
2020-10-12 5:24 ` [PATCH 3/4] pm80xx: Avoid busywait in FW ready check Viswas G
@ 2020-10-12 5:24 ` Viswas G
3 siblings, 0 replies; 6+ messages in thread
From: Viswas G @ 2020-10-12 5:24 UTC (permalink / raw)
To: linux-scsi
Cc: Vasanthalakshmi.Tharmarajan, Ruksar Devadi, Viswas.G,
peter chang --cc=yuuzheng @ google . com, vishakhavc, radha,
akshatzen
From: yuuzheng <yuuzheng@google.com>
The use-after-free or null-pointer error occurs when the 251-byte
response data are copied from IOMB buffer to response message
buffer in function mp8001_mpi_set_nvmd_resp. pm8001_mpi_set_nvmd_resp
is a function to process the response of command set_nvmd_data_resp.
After sending the command set_nvmd_data, the caller begins to sleep by
calling wait_for_complete() and wait for the wake-up from calling
complete() in pm8001_mpi_set_nvmd_resp. In the current code,
the memcpy for response message buffer occurs after calling complete().
So, it is not protected by the use of wait_for_completion() and
complete().
Due to unexpected events (e.g., interrupt), if response buffer gets
freed before memcpy, the use-after-free error will occur.
To fix it, the complete() should be called after memcpy.
Signed-off-by: yuuzheng <yuuzheng@google.com>
Signed-off-by: Viswas G <Viswas.G@microchip.com>
Signed-off-by: Ruksar Devadi <Ruksar.devadi@microchip.com>
Signed-off-by: Radha Ramachandran <radha@google.com>
---
drivers/scsi/pm8001/pm8001_hwi.c | 7 ++++++-
1 file changed, 6 insertions(+), 1 deletion(-)
diff --git a/drivers/scsi/pm8001/pm8001_hwi.c b/drivers/scsi/pm8001/pm8001_hwi.c
index 9e9a546da959..2054c2b03d92 100644
--- a/drivers/scsi/pm8001/pm8001_hwi.c
+++ b/drivers/scsi/pm8001/pm8001_hwi.c
@@ -3279,10 +3279,15 @@ pm8001_mpi_get_nvmd_resp(struct pm8001_hba_info *pm8001_ha, void *piomb)
pm8001_ha->memoryMap.region[NVMD].virt_ptr,
fw_control_context->len);
kfree(ccb->fw_control_context);
+ /* To avoid race condition, complete should be
+ * called after the message is copied to
+ * fw_control_context->usrAddr
+ */
+ complete(pm8001_ha->nvmd_completion);
+ PM8001_MSG_DBG(pm8001_ha, pm8001_printk("Set nvm data complete!\n"));
ccb->task = NULL;
ccb->ccb_tag = 0xFFFFFFFF;
pm8001_tag_free(pm8001_ha, tag);
- complete(pm8001_ha->nvmd_completion);
}
int pm8001_mpi_local_phy_ctl(struct pm8001_hba_info *pm8001_ha, void *piomb)
--
2.16.3
^ permalink raw reply related [flat|nested] 6+ messages in thread
* Re: [PATCH 1/4] pm80xx: make mpi_build_cmd locking consistent
2020-10-12 5:24 ` [PATCH 1/4] pm80xx: make mpi_build_cmd locking consistent Viswas G
@ 2020-10-27 0:41 ` Martin K. Petersen
0 siblings, 0 replies; 6+ messages in thread
From: Martin K. Petersen @ 2020-10-27 0:41 UTC (permalink / raw)
To: Viswas G
Cc: linux-scsi, Vasanthalakshmi.Tharmarajan, Ruksar Devadi, Viswas.G,
peter chang, vishakhavc, radha, akshatzen
Hi Viswas,
Your patch descriptions need some work. See
Documentation/process/submitting-patches.rst
Specifically the section named "Describe your changes".
> the missing task completions appear to be
Which missing completions are these?
[...]
> if a sata request issues from cpu zero when a management request
> issues, then there is some 'tearing' and the issue queue is sort of
> broken and we lose track of issues.
Too vague for a problem description.
> disabling interrupts may be overkill because there may not be cases
> where we're using this from interrupt context (the interrupt path
> has a different per-queue lock).
No clear description of what the fix is.
Please reword your patch descriptions so it is clear to the reviewer
what the problem is and how it is being addressed in the code changes
that follow.
Thank you!
--
Martin K. Petersen Oracle Linux Engineering
^ permalink raw reply [flat|nested] 6+ messages in thread
end of thread, other threads:[~2020-10-27 0:46 UTC | newest]
Thread overview: 6+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2020-10-12 5:24 [PATCH 0/4] pm80xx updates Viswas G
2020-10-12 5:24 ` [PATCH 1/4] pm80xx: make mpi_build_cmd locking consistent Viswas G
2020-10-27 0:41 ` Martin K. Petersen
2020-10-12 5:24 ` [PATCH 2/4] pm80xx: make running_req atomic Viswas G
2020-10-12 5:24 ` [PATCH 3/4] pm80xx: Avoid busywait in FW ready check Viswas G
2020-10-12 5:24 ` [PATCH 4/4] pm80xx: make pm8001_mpi_set_nvmd_resp free of race condition Viswas G
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.