[PATCH] arm: sunxi: disable obsolete VIDEO config

[PATCH] arm: sunxi: disable obsolete VIDEO config

[Anatolij Gustschin]

DM_VIDEO conversion deadline has passed, disable VIDEO config
option by default. Boards should convert to DM_VIDEO if they
need video console support.

Signed-off-by: Anatolij Gustschin <agust@denx.de>
Cc: Jagan Teki <jagan@amarulasolutions.com>
Cc: Maxime Ripard <mripard@kernel.org>
---
 arch/arm/mach-sunxi/Kconfig | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/arm/mach-sunxi/Kconfig b/arch/arm/mach-sunxi/Kconfig
index be0822bfb7..f672bb8b4e 100644
--- a/arch/arm/mach-sunxi/Kconfig
+++ b/arch/arm/mach-sunxi/Kconfig
@@ -760,7 +760,7 @@ config VIDEO_SUNXI
 	depends on !MACH_SUN50I_H6
 	select VIDEO
 	imply VIDEO_DT_SIMPLEFB
-	default y
+	default n
 	---help---
 	Say Y here to add support for using a cfb console on the HDMI, LCD
 	or VGA output found on most sunxi devices. See doc/README.video for
-- 
2.17.1

[PATCH] at91sam9: disable obsolete VIDEO config

[Anatolij Gustschin]

DM_VIDEO conversion deadline has passed, disable VIDEO config.

Signed-off-by: Anatolij Gustschin <agust@denx.de>
---
 configs/at91sam9261ek_dataflash_cs0_defconfig | 2 +-
 configs/at91sam9261ek_dataflash_cs3_defconfig | 2 +-
 configs/at91sam9261ek_nandflash_defconfig     | 2 +-
 configs/at91sam9263ek_dataflash_cs0_defconfig | 2 +-
 configs/at91sam9263ek_dataflash_defconfig     | 2 +-
 configs/at91sam9263ek_nandflash_defconfig     | 2 +-
 configs/at91sam9263ek_norflash_boot_defconfig | 2 +-
 configs/at91sam9263ek_norflash_defconfig      | 2 +-
 configs/at91sam9g10ek_dataflash_cs0_defconfig | 2 +-
 configs/at91sam9g10ek_dataflash_cs3_defconfig | 2 +-
 configs/at91sam9g10ek_nandflash_defconfig     | 2 +-
 configs/at91sam9m10g45ek_mmc_defconfig        | 2 +-
 configs/at91sam9m10g45ek_nandflash_defconfig  | 2 +-
 configs/at91sam9rlek_dataflash_defconfig      | 2 +-
 configs/at91sam9rlek_mmc_defconfig            | 2 +-
 configs/at91sam9rlek_nandflash_defconfig      | 2 +-
 16 files changed, 16 insertions(+), 16 deletions(-)

diff --git a/configs/at91sam9261ek_dataflash_cs0_defconfig b/configs/at91sam9261ek_dataflash_cs0_defconfig
index 422b8aed2a..9d4e5b51d0 100644
--- a/configs/at91sam9261ek_dataflash_cs0_defconfig
+++ b/configs/at91sam9261ek_dataflash_cs0_defconfig
@@ -59,4 +59,4 @@ CONFIG_TIMER=y
 CONFIG_ATMEL_PIT_TIMER=y
 CONFIG_USB=y
 CONFIG_USB_STORAGE=y
-CONFIG_LCD=y
+# CONFIG_LCD is not set
diff --git a/configs/at91sam9261ek_dataflash_cs3_defconfig b/configs/at91sam9261ek_dataflash_cs3_defconfig
index 4494970153..3a0bb10624 100644
--- a/configs/at91sam9261ek_dataflash_cs3_defconfig
+++ b/configs/at91sam9261ek_dataflash_cs3_defconfig
@@ -59,4 +59,4 @@ CONFIG_TIMER=y
 CONFIG_ATMEL_PIT_TIMER=y
 CONFIG_USB=y
 CONFIG_USB_STORAGE=y
-CONFIG_LCD=y
+# CONFIG_LCD is not set
diff --git a/configs/at91sam9261ek_nandflash_defconfig b/configs/at91sam9261ek_nandflash_defconfig
index 2381199f60..abdf2236a8 100644
--- a/configs/at91sam9261ek_nandflash_defconfig
+++ b/configs/at91sam9261ek_nandflash_defconfig
@@ -56,4 +56,4 @@ CONFIG_TIMER=y
 CONFIG_ATMEL_PIT_TIMER=y
 CONFIG_USB=y
 CONFIG_USB_STORAGE=y
-CONFIG_LCD=y
+# CONFIG_LCD is not set
diff --git a/configs/at91sam9263ek_dataflash_cs0_defconfig b/configs/at91sam9263ek_dataflash_cs0_defconfig
index b458aece4b..564b781a20 100644
--- a/configs/at91sam9263ek_dataflash_cs0_defconfig
+++ b/configs/at91sam9263ek_dataflash_cs0_defconfig
@@ -67,4 +67,4 @@ CONFIG_ATMEL_PIT_TIMER=y
 CONFIG_USB=y
 CONFIG_DM_USB=y
 CONFIG_USB_STORAGE=y
-CONFIG_LCD=y
+# CONFIG_LCD is not set
diff --git a/configs/at91sam9263ek_dataflash_defconfig b/configs/at91sam9263ek_dataflash_defconfig
index b458aece4b..564b781a20 100644
--- a/configs/at91sam9263ek_dataflash_defconfig
+++ b/configs/at91sam9263ek_dataflash_defconfig
@@ -67,4 +67,4 @@ CONFIG_ATMEL_PIT_TIMER=y
 CONFIG_USB=y
 CONFIG_DM_USB=y
 CONFIG_USB_STORAGE=y
-CONFIG_LCD=y
+# CONFIG_LCD is not set
diff --git a/configs/at91sam9263ek_nandflash_defconfig b/configs/at91sam9263ek_nandflash_defconfig
index a7a372d766..32b2fffff8 100644
--- a/configs/at91sam9263ek_nandflash_defconfig
+++ b/configs/at91sam9263ek_nandflash_defconfig
@@ -64,4 +64,4 @@ CONFIG_ATMEL_PIT_TIMER=y
 CONFIG_USB=y
 CONFIG_DM_USB=y
 CONFIG_USB_STORAGE=y
-CONFIG_LCD=y
+# CONFIG_LCD is not set
diff --git a/configs/at91sam9263ek_norflash_boot_defconfig b/configs/at91sam9263ek_norflash_boot_defconfig
index 7aea097f47..2955b058ad 100644
--- a/configs/at91sam9263ek_norflash_boot_defconfig
+++ b/configs/at91sam9263ek_norflash_boot_defconfig
@@ -67,4 +67,4 @@ CONFIG_ATMEL_PIT_TIMER=y
 CONFIG_USB=y
 CONFIG_DM_USB=y
 CONFIG_USB_STORAGE=y
-CONFIG_LCD=y
+# CONFIG_LCD is not set
diff --git a/configs/at91sam9263ek_norflash_defconfig b/configs/at91sam9263ek_norflash_defconfig
index 7f4de534f8..56355f6a6a 100644
--- a/configs/at91sam9263ek_norflash_defconfig
+++ b/configs/at91sam9263ek_norflash_defconfig
@@ -67,4 +67,4 @@ CONFIG_ATMEL_PIT_TIMER=y
 CONFIG_USB=y
 CONFIG_DM_USB=y
 CONFIG_USB_STORAGE=y
-CONFIG_LCD=y
+# CONFIG_LCD is not set
diff --git a/configs/at91sam9g10ek_dataflash_cs0_defconfig b/configs/at91sam9g10ek_dataflash_cs0_defconfig
index 3e5632cddd..a5a493d1dd 100644
--- a/configs/at91sam9g10ek_dataflash_cs0_defconfig
+++ b/configs/at91sam9g10ek_dataflash_cs0_defconfig
@@ -57,4 +57,4 @@ CONFIG_SPI=y
 CONFIG_DM_SPI=y
 CONFIG_USB=y
 CONFIG_USB_STORAGE=y
-CONFIG_LCD=y
+# CONFIG_LCD is not set
diff --git a/configs/at91sam9g10ek_dataflash_cs3_defconfig b/configs/at91sam9g10ek_dataflash_cs3_defconfig
index 31ce87e4f8..85c4c50440 100644
--- a/configs/at91sam9g10ek_dataflash_cs3_defconfig
+++ b/configs/at91sam9g10ek_dataflash_cs3_defconfig
@@ -57,4 +57,4 @@ CONFIG_SPI=y
 CONFIG_DM_SPI=y
 CONFIG_USB=y
 CONFIG_USB_STORAGE=y
-CONFIG_LCD=y
+# CONFIG_LCD is not set
diff --git a/configs/at91sam9g10ek_nandflash_defconfig b/configs/at91sam9g10ek_nandflash_defconfig
index bf820d7dd9..609b9eb4e2 100644
--- a/configs/at91sam9g10ek_nandflash_defconfig
+++ b/configs/at91sam9g10ek_nandflash_defconfig
@@ -54,4 +54,4 @@ CONFIG_SPI=y
 CONFIG_DM_SPI=y
 CONFIG_USB=y
 CONFIG_USB_STORAGE=y
-CONFIG_LCD=y
+# CONFIG_LCD is not set
diff --git a/configs/at91sam9m10g45ek_mmc_defconfig b/configs/at91sam9m10g45ek_mmc_defconfig
index 81812697e0..2885e12bc9 100644
--- a/configs/at91sam9m10g45ek_mmc_defconfig
+++ b/configs/at91sam9m10g45ek_mmc_defconfig
@@ -58,4 +58,4 @@ CONFIG_USB=y
 CONFIG_DM_USB=y
 CONFIG_USB_EHCI_HCD=y
 CONFIG_USB_STORAGE=y
-CONFIG_LCD=y
+# CONFIG_LCD is not set
diff --git a/configs/at91sam9m10g45ek_nandflash_defconfig b/configs/at91sam9m10g45ek_nandflash_defconfig
index 636cab1ecb..f89bf1e185 100644
--- a/configs/at91sam9m10g45ek_nandflash_defconfig
+++ b/configs/at91sam9m10g45ek_nandflash_defconfig
@@ -58,4 +58,4 @@ CONFIG_USB=y
 CONFIG_DM_USB=y
 CONFIG_USB_EHCI_HCD=y
 CONFIG_USB_STORAGE=y
-CONFIG_LCD=y
+# CONFIG_LCD is not set
diff --git a/configs/at91sam9rlek_dataflash_defconfig b/configs/at91sam9rlek_dataflash_defconfig
index 9f314b3933..f037a8df38 100644
--- a/configs/at91sam9rlek_dataflash_defconfig
+++ b/configs/at91sam9rlek_dataflash_defconfig
@@ -60,4 +60,4 @@ CONFIG_SPI=y
 CONFIG_DM_SPI=y
 CONFIG_TIMER=y
 CONFIG_ATMEL_PIT_TIMER=y
-CONFIG_LCD=y
+# CONFIG_LCD is not set
diff --git a/configs/at91sam9rlek_mmc_defconfig b/configs/at91sam9rlek_mmc_defconfig
index 9b22c55139..34773508d2 100644
--- a/configs/at91sam9rlek_mmc_defconfig
+++ b/configs/at91sam9rlek_mmc_defconfig
@@ -56,4 +56,4 @@ CONFIG_SPI=y
 CONFIG_DM_SPI=y
 CONFIG_TIMER=y
 CONFIG_ATMEL_PIT_TIMER=y
-CONFIG_LCD=y
+# CONFIG_LCD is not set
diff --git a/configs/at91sam9rlek_nandflash_defconfig b/configs/at91sam9rlek_nandflash_defconfig
index 38c18f9791..ad8fcdf13e 100644
--- a/configs/at91sam9rlek_nandflash_defconfig
+++ b/configs/at91sam9rlek_nandflash_defconfig
@@ -57,4 +57,4 @@ CONFIG_SPI=y
 CONFIG_DM_SPI=y
 CONFIG_TIMER=y
 CONFIG_ATMEL_PIT_TIMER=y
-CONFIG_LCD=y
+# CONFIG_LCD is not set
-- 
2.17.1

[PATCH] at91sam9: disable obsolete VIDEO config

[Anatolij Gustschin]

On Sun, 18 Oct 2020 21:18:16 +0200
Anatolij Gustschin agust at denx.de wrote:

> DM_VIDEO conversion deadline has passed, disable VIDEO config.
> 
> Signed-off-by: Anatolij Gustschin <agust@denx.de>
> ---
>  configs/at91sam9261ek_dataflash_cs0_defconfig | 2 +-
>  configs/at91sam9261ek_dataflash_cs3_defconfig | 2 +-
>  configs/at91sam9261ek_nandflash_defconfig     | 2 +-
>  configs/at91sam9263ek_dataflash_cs0_defconfig | 2 +-
>  configs/at91sam9263ek_dataflash_defconfig     | 2 +-
>  configs/at91sam9263ek_nandflash_defconfig     | 2 +-
>  configs/at91sam9263ek_norflash_boot_defconfig | 2 +-
>  configs/at91sam9263ek_norflash_defconfig      | 2 +-
>  configs/at91sam9g10ek_dataflash_cs0_defconfig | 2 +-
>  configs/at91sam9g10ek_dataflash_cs3_defconfig | 2 +-
>  configs/at91sam9g10ek_nandflash_defconfig     | 2 +-
>  configs/at91sam9m10g45ek_mmc_defconfig        | 2 +-
>  configs/at91sam9m10g45ek_nandflash_defconfig  | 2 +-
>  configs/at91sam9rlek_dataflash_defconfig      | 2 +-
>  configs/at91sam9rlek_mmc_defconfig            | 2 +-
>  configs/at91sam9rlek_nandflash_defconfig      | 2 +-
>  16 files changed, 16 insertions(+), 16 deletions(-)

Applied to u-boot-video/master.

[PATCH] at91sam9n12ek: disable obsolete VIDEO config

[Anatolij Gustschin]

DM_VIDEO conversion deadline has passed, disable VIDEO config.
Boards should convert to DM_VIDEO if they need video console
support.

Signed-off-by: Anatolij Gustschin <agust@denx.de>
Cc: Eugen Hristev <eugen.hristev@microchip.com>
---
 configs/at91sam9n12ek_mmc_defconfig       | 2 +-
 configs/at91sam9n12ek_nandflash_defconfig | 2 +-
 configs/at91sam9n12ek_spiflash_defconfig  | 2 +-
 3 files changed, 3 insertions(+), 3 deletions(-)

diff --git a/configs/at91sam9n12ek_mmc_defconfig b/configs/at91sam9n12ek_mmc_defconfig
index 23be41edb0..15a43355d9 100644
--- a/configs/at91sam9n12ek_mmc_defconfig
+++ b/configs/at91sam9n12ek_mmc_defconfig
@@ -62,4 +62,4 @@ CONFIG_USB=y
 CONFIG_DM_USB=y
 CONFIG_USB_STORAGE=y
 CONFIG_ATMEL_HLCD=y
-CONFIG_LCD=y
+# CONFIG_LCD is not set
diff --git a/configs/at91sam9n12ek_nandflash_defconfig b/configs/at91sam9n12ek_nandflash_defconfig
index 35c1b4ac31..5f3c25611f 100644
--- a/configs/at91sam9n12ek_nandflash_defconfig
+++ b/configs/at91sam9n12ek_nandflash_defconfig
@@ -63,4 +63,4 @@ CONFIG_USB=y
 CONFIG_DM_USB=y
 CONFIG_USB_STORAGE=y
 CONFIG_ATMEL_HLCD=y
-CONFIG_LCD=y
+# CONFIG_LCD is not set
diff --git a/configs/at91sam9n12ek_spiflash_defconfig b/configs/at91sam9n12ek_spiflash_defconfig
index aea633d5dc..65c8926547 100644
--- a/configs/at91sam9n12ek_spiflash_defconfig
+++ b/configs/at91sam9n12ek_spiflash_defconfig
@@ -64,4 +64,4 @@ CONFIG_USB=y
 CONFIG_DM_USB=y
 CONFIG_USB_STORAGE=y
 CONFIG_ATMEL_HLCD=y
-CONFIG_LCD=y
+# CONFIG_LCD is not set
-- 
2.17.1

[PATCH] at91sam9n12ek: disable obsolete VIDEO config

[Anatolij Gustschin]

On Sun, 18 Oct 2020 21:18:17 +0200
Anatolij Gustschin agust at denx.de wrote:

> DM_VIDEO conversion deadline has passed, disable VIDEO config.
> Boards should convert to DM_VIDEO if they need video console
> support.
> 
> Signed-off-by: Anatolij Gustschin <agust@denx.de>
> Cc: Eugen Hristev <eugen.hristev@microchip.com>
> ---
>  configs/at91sam9n12ek_mmc_defconfig       | 2 +-
>  configs/at91sam9n12ek_nandflash_defconfig | 2 +-
>  configs/at91sam9n12ek_spiflash_defconfig  | 2 +-
>  3 files changed, 3 insertions(+), 3 deletions(-)

Applied to u-boot-video/master.

[PATCH] eb_cpu5282: fix CONFIG_DM_VIDEO build warnings

[Anatolij Gustschin]

Remove CONFIG_VIDEO dependency to fix board removal warnings.

Signed-off-by: Anatolij Gustschin <agust@denx.de>
Cc: Jens Scharsig <esw@bus-elektronik.de>
---
 board/BuS/eb_cpu5282/eb_cpu5282.c     | 7 +++----
 common/stdio.c                        | 4 +++-
 configs/eb_cpu5282_defconfig          | 3 +--
 configs/eb_cpu5282_internal_defconfig | 3 +--
 drivers/video/Kconfig                 | 7 +++++++
 include/configs/eb_cpu5282.h          | 4 ----
 scripts/config_whitelist.txt          | 1 -
 7 files changed, 15 insertions(+), 14 deletions(-)

diff --git a/board/BuS/eb_cpu5282/eb_cpu5282.c b/board/BuS/eb_cpu5282/eb_cpu5282.c
index 1d05e40c20..f5e4de3c41 100644
--- a/board/BuS/eb_cpu5282/eb_cpu5282.c
+++ b/board/BuS/eb_cpu5282/eb_cpu5282.c
@@ -20,7 +20,7 @@
 
 DECLARE_GLOBAL_DATA_PTR;
 
-#ifdef CONFIG_VIDEO
+#if IS_ENABLED(CONFIG_VIDEO_VCXK)
 unsigned long display_width;
 unsigned long display_height;
 #endif
@@ -183,8 +183,7 @@ void __led_set(led_id_t mask, int state)
 		MCFGPTA_GPTPORT &= ~(1 << 3);
 }
 
-#if defined(CONFIG_VIDEO)
-
+#if IS_ENABLED(CONFIG_VIDEO_VCXK)
 int drv_video_init(void)
 {
 	char *s;
@@ -225,7 +224,7 @@ int drv_video_init(void)
 
 /*---------------------------------------------------------------------------*/
 
-#ifdef CONFIG_VIDEO
+#if IS_ENABLED(CONFIG_VIDEO_VCXK)
 int do_brightness(struct cmd_tbl *cmdtp, int flag, int argc, char *const argv[])
 {
 	int rcode = 0;
diff --git a/common/stdio.c b/common/stdio.c
index 84c36a735c..a15f30804b 100644
--- a/common/stdio.c
+++ b/common/stdio.c
@@ -356,7 +356,9 @@ int stdio_add_devices(void)
 	} else {
 		if (IS_ENABLED(CONFIG_LCD))
 			drv_lcd_init();
-		if (IS_ENABLED(CONFIG_VIDEO) || IS_ENABLED(CONFIG_CFB_CONSOLE))
+		if (IS_ENABLED(CONFIG_VIDEO) ||
+		    IS_ENABLED(CONFIG_CFB_CONSOLE) ||
+		    IS_ENABLED(CONFIG_VIDEO_VCXK))
 			drv_video_init();
 	}
 
diff --git a/configs/eb_cpu5282_defconfig b/configs/eb_cpu5282_defconfig
index bc0f72f44a..1f89342cb5 100644
--- a/configs/eb_cpu5282_defconfig
+++ b/configs/eb_cpu5282_defconfig
@@ -32,6 +32,5 @@ CONFIG_SYS_FLASH_CFI=y
 CONFIG_DM_ETH=y
 CONFIG_MCFFEC=y
 CONFIG_MII=y
-CONFIG_VIDEO=y
-# CONFIG_CFB_CONSOLE is not set
+CONFIG_VIDEO_VCXK=y
 CONFIG_SPLASH_SCREEN=y
diff --git a/configs/eb_cpu5282_internal_defconfig b/configs/eb_cpu5282_internal_defconfig
index 72e34ba3b4..ad7b7d56bc 100644
--- a/configs/eb_cpu5282_internal_defconfig
+++ b/configs/eb_cpu5282_internal_defconfig
@@ -31,6 +31,5 @@ CONFIG_SYS_FLASH_CFI=y
 CONFIG_DM_ETH=y
 CONFIG_MCFFEC=y
 CONFIG_MII=y
-CONFIG_VIDEO=y
-# CONFIG_CFB_CONSOLE is not set
+CONFIG_VIDEO_VCXK=y
 CONFIG_SPLASH_SCREEN=y
diff --git a/drivers/video/Kconfig b/drivers/video/Kconfig
index b1cb745d59..2f3bb4b085 100644
--- a/drivers/video/Kconfig
+++ b/drivers/video/Kconfig
@@ -972,4 +972,11 @@ config BMP_32BPP
 	help
 	  Support display of bitmaps file with 32-bit-per-pixel.
 
+config VIDEO_VCXK
+	bool "Enable VCXK video controller driver support"
+	default n
+	help
+	  This enables VCXK driver which can be used with VC2K, VC4K
+	  and VC8K devices on various boards from BuS Elektronik GmbH.
+
 endmenu
diff --git a/include/configs/eb_cpu5282.h b/include/configs/eb_cpu5282.h
index db92bbd49a..ab9daa4074 100644
--- a/include/configs/eb_cpu5282.h
+++ b/include/configs/eb_cpu5282.h
@@ -212,9 +212,6 @@
  * VIDEO configuration
  */
 
-#ifdef CONFIG_VIDEO
-#define CONFIG_VIDEO_VCXK			1
-
 #define CONFIG_SYS_VCXK_DEFAULT_LINEALIGN	2
 #define	CONFIG_SYS_VCXK_DOUBLEBUFFERED		1
 #define CONFIG_SYS_VCXK_BASE			CONFIG_SYS_CS2_BASE
@@ -235,6 +232,5 @@
 #define CONFIG_SYS_VCXK_INVERT_DDR		MCFGPIO_DDRE
 #define CONFIG_SYS_VCXK_INVERT_PIN		MCFGPIO_PORT2
 
-#endif /* CONFIG_VIDEO */
 #endif	/* _CONFIG_M5282EVB_H */
 /*---------------------------------------------------------------------*/
diff --git a/scripts/config_whitelist.txt b/scripts/config_whitelist.txt
index dc4f0b050c..3af200bb17 100644
--- a/scripts/config_whitelist.txt
+++ b/scripts/config_whitelist.txt
@@ -4069,7 +4069,6 @@ CONFIG_VIDEO_MB862xx_ACCEL
 CONFIG_VIDEO_MXS
 CONFIG_VIDEO_MXS_MODE_SYSTEM
 CONFIG_VIDEO_STD_TIMINGS
-CONFIG_VIDEO_VCXK
 CONFIG_VID_FLS_ENV
 CONFIG_VM86
 CONFIG_VOIPAC_LCD
-- 
2.17.1

[PATCH] eb_cpu5282: fix CONFIG_DM_VIDEO build warnings

[Anatolij Gustschin]

On Sun, 18 Oct 2020 21:18:18 +0200
Anatolij Gustschin agust at denx.de wrote:

> Remove CONFIG_VIDEO dependency to fix board removal warnings.
> 
> Signed-off-by: Anatolij Gustschin <agust@denx.de>
> Cc: Jens Scharsig <esw@bus-elektronik.de>
> ---
>  board/BuS/eb_cpu5282/eb_cpu5282.c     | 7 +++----
>  common/stdio.c                        | 4 +++-
>  configs/eb_cpu5282_defconfig          | 3 +--
>  configs/eb_cpu5282_internal_defconfig | 3 +--
>  drivers/video/Kconfig                 | 7 +++++++
>  include/configs/eb_cpu5282.h          | 4 ----
>  scripts/config_whitelist.txt          | 1 -
>  7 files changed, 15 insertions(+), 14 deletions(-)

Applied to u-boot-video/master.

[PATCH] imx: mx6sxsabresd: disable obsolete VIDEO config

[Anatolij Gustschin]

DM_VIDEO conversion deadline has passed, disable VIDEO config.

Signed-off-by: Anatolij Gustschin <agust@denx.de>
---
 configs/mx6sxsabresd_defconfig | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/configs/mx6sxsabresd_defconfig b/configs/mx6sxsabresd_defconfig
index 584e79572a..a33ec49ed4 100644
--- a/configs/mx6sxsabresd_defconfig
+++ b/configs/mx6sxsabresd_defconfig
@@ -73,7 +73,7 @@ CONFIG_DM_USB=y
 CONFIG_USB_STORAGE=y
 CONFIG_USB_HOST_ETHER=y
 CONFIG_USB_ETHER_ASIX=y
-CONFIG_VIDEO=y
+# CONFIG_VIDEO is not set
 CONFIG_SPLASH_SCREEN=y
 CONFIG_SPLASH_SCREEN_ALIGN=y
 CONFIG_VIDEO_BMP_RLE8=y
-- 
2.17.1

[PATCH] imx: mx6sxsabresd: disable obsolete VIDEO config

[Anatolij Gustschin]

On Sun, 18 Oct 2020 21:18:19 +0200
Anatolij Gustschin agust at denx.de wrote:

> DM_VIDEO conversion deadline has passed, disable VIDEO config.
> 
> Signed-off-by: Anatolij Gustschin <agust@denx.de>
> ---
>  configs/mx6sxsabresd_defconfig | 2 +-
>  1 file changed, 1 insertion(+), 1 deletion(-)

Applied to u-boot-video/master.

[PATCH] imx: mx7dsabresd: disable obsolete VIDEO config

[Anatolij Gustschin]

DM_VIDEO conversion deadline has passed, disable VIDEO config.

Signed-off-by: Anatolij Gustschin <agust@denx.de>
---
 configs/mx7dsabresd_defconfig      | 2 +-
 configs/mx7dsabresd_qspi_defconfig | 2 +-
 2 files changed, 2 insertions(+), 2 deletions(-)

diff --git a/configs/mx7dsabresd_defconfig b/configs/mx7dsabresd_defconfig
index 9e2e24982f..9b4bbf3024 100644
--- a/configs/mx7dsabresd_defconfig
+++ b/configs/mx7dsabresd_defconfig
@@ -84,7 +84,7 @@ CONFIG_CI_UDC=y
 CONFIG_USB_GADGET_DOWNLOAD=y
 CONFIG_USB_HOST_ETHER=y
 CONFIG_USB_ETHER_ASIX=y
-CONFIG_VIDEO=y
+# CONFIG_VIDEO is not set
 CONFIG_SPLASH_SCREEN=y
 CONFIG_SPLASH_SCREEN_ALIGN=y
 CONFIG_VIDEO_BMP_RLE8=y
diff --git a/configs/mx7dsabresd_qspi_defconfig b/configs/mx7dsabresd_qspi_defconfig
index 7f73956aeb..fa5deb8e6c 100644
--- a/configs/mx7dsabresd_qspi_defconfig
+++ b/configs/mx7dsabresd_qspi_defconfig
@@ -91,7 +91,7 @@ CONFIG_CI_UDC=y
 CONFIG_USB_GADGET_DOWNLOAD=y
 CONFIG_USB_HOST_ETHER=y
 CONFIG_USB_ETHER_ASIX=y
-CONFIG_VIDEO=y
+# CONFIG_VIDEO is not set
 CONFIG_SPLASH_SCREEN=y
 CONFIG_SPLASH_SCREEN_ALIGN=y
 CONFIG_VIDEO_BMP_RLE8=y
-- 
2.17.1

[PATCH] imx: mx7dsabresd: disable obsolete VIDEO config

[Anatolij Gustschin]

On Sun, 18 Oct 2020 21:18:20 +0200
Anatolij Gustschin agust at denx.de wrote:

> DM_VIDEO conversion deadline has passed, disable VIDEO config.
> 
> Signed-off-by: Anatolij Gustschin <agust@denx.de>
> ---
>  configs/mx7dsabresd_defconfig      | 2 +-
>  configs/mx7dsabresd_qspi_defconfig | 2 +-
>  2 files changed, 2 insertions(+), 2 deletions(-)

Applied to u-boot-video/master.

[PATCH] ls1021aqds: disable obsolete VIDEO config

[Anatolij Gustschin]

DM_VIDEO conversion deadline has passed, disable VIDEO config.

Signed-off-by: Anatolij Gustschin <agust@denx.de>
Cc: Alison Wang <alison.wang@nxp.com>
---
 configs/ls1021aqds_ddr4_nor_defconfig        | 4 ++--
 configs/ls1021aqds_ddr4_nor_lpuart_defconfig | 4 ++--
 configs/ls1021aqds_nand_defconfig            | 4 ++--
 configs/ls1021aqds_nor_SECURE_BOOT_defconfig | 4 ++--
 configs/ls1021aqds_nor_defconfig             | 4 ++--
 configs/ls1021aqds_nor_lpuart_defconfig      | 4 ++--
 configs/ls1021aqds_qspi_defconfig            | 4 ++--
 configs/ls1021aqds_sdcard_ifc_defconfig      | 4 ++--
 configs/ls1021aqds_sdcard_qspi_defconfig     | 4 ++--
 9 files changed, 18 insertions(+), 18 deletions(-)

diff --git a/configs/ls1021aqds_ddr4_nor_defconfig b/configs/ls1021aqds_ddr4_nor_defconfig
index 6687fc2630..b6ac5232b7 100644
--- a/configs/ls1021aqds_ddr4_nor_defconfig
+++ b/configs/ls1021aqds_ddr4_nor_defconfig
@@ -70,6 +70,6 @@ CONFIG_DM_USB=y
 CONFIG_USB_XHCI_HCD=y
 CONFIG_USB_XHCI_DWC3=y
 CONFIG_USB_STORAGE=y
-CONFIG_VIDEO_FSL_DCU_FB=y
-CONFIG_VIDEO=y
+# CONFIG_VIDEO_FSL_DCU_FB is not set
+# CONFIG_VIDEO is not set
 # CONFIG_VIDEO_SW_CURSOR is not set
diff --git a/configs/ls1021aqds_ddr4_nor_lpuart_defconfig b/configs/ls1021aqds_ddr4_nor_lpuart_defconfig
index 555d4e9843..1bb657df3b 100644
--- a/configs/ls1021aqds_ddr4_nor_lpuart_defconfig
+++ b/configs/ls1021aqds_ddr4_nor_lpuart_defconfig
@@ -70,6 +70,6 @@ CONFIG_DM_USB=y
 CONFIG_USB_XHCI_HCD=y
 CONFIG_USB_XHCI_DWC3=y
 CONFIG_USB_STORAGE=y
-CONFIG_VIDEO_FSL_DCU_FB=y
-CONFIG_VIDEO=y
+# CONFIG_VIDEO_FSL_DCU_FB is not set
+# CONFIG_VIDEO is not set
 # CONFIG_VIDEO_SW_CURSOR is not set
diff --git a/configs/ls1021aqds_nand_defconfig b/configs/ls1021aqds_nand_defconfig
index 9478ed52a6..f0d49bad29 100644
--- a/configs/ls1021aqds_nand_defconfig
+++ b/configs/ls1021aqds_nand_defconfig
@@ -85,6 +85,6 @@ CONFIG_DM_USB=y
 CONFIG_USB_XHCI_HCD=y
 CONFIG_USB_XHCI_DWC3=y
 CONFIG_USB_STORAGE=y
-CONFIG_VIDEO_FSL_DCU_FB=y
-CONFIG_VIDEO=y
+# CONFIG_VIDEO_FSL_DCU_FB is not set
+# CONFIG_VIDEO is not set
 # CONFIG_VIDEO_SW_CURSOR is not set
diff --git a/configs/ls1021aqds_nor_SECURE_BOOT_defconfig b/configs/ls1021aqds_nor_SECURE_BOOT_defconfig
index c5e93dac60..0ba4124585 100644
--- a/configs/ls1021aqds_nor_SECURE_BOOT_defconfig
+++ b/configs/ls1021aqds_nor_SECURE_BOOT_defconfig
@@ -67,8 +67,8 @@ CONFIG_DM_USB=y
 CONFIG_USB_XHCI_HCD=y
 CONFIG_USB_XHCI_DWC3=y
 CONFIG_USB_STORAGE=y
-CONFIG_VIDEO_FSL_DCU_FB=y
-CONFIG_VIDEO=y
+# CONFIG_VIDEO_FSL_DCU_FB is not set
+# CONFIG_VIDEO is not set
 # CONFIG_VIDEO_SW_CURSOR is not set
 CONFIG_RSA=y
 CONFIG_SPL_RSA=y
diff --git a/configs/ls1021aqds_nor_defconfig b/configs/ls1021aqds_nor_defconfig
index 10060a10ac..da2a7617c8 100644
--- a/configs/ls1021aqds_nor_defconfig
+++ b/configs/ls1021aqds_nor_defconfig
@@ -71,6 +71,6 @@ CONFIG_DM_USB=y
 CONFIG_USB_XHCI_HCD=y
 CONFIG_USB_XHCI_DWC3=y
 CONFIG_USB_STORAGE=y
-CONFIG_VIDEO_FSL_DCU_FB=y
-CONFIG_VIDEO=y
+# CONFIG_VIDEO_FSL_DCU_FB is not set
+# CONFIG_VIDEO is not set
 # CONFIG_VIDEO_SW_CURSOR is not set
diff --git a/configs/ls1021aqds_nor_lpuart_defconfig b/configs/ls1021aqds_nor_lpuart_defconfig
index 3dc0baafe3..d3d8fcb633 100644
--- a/configs/ls1021aqds_nor_lpuart_defconfig
+++ b/configs/ls1021aqds_nor_lpuart_defconfig
@@ -71,6 +71,6 @@ CONFIG_DM_USB=y
 CONFIG_USB_XHCI_HCD=y
 CONFIG_USB_XHCI_DWC3=y
 CONFIG_USB_STORAGE=y
-CONFIG_VIDEO_FSL_DCU_FB=y
-CONFIG_VIDEO=y
+# CONFIG_VIDEO_FSL_DCU_FB is not set
+# CONFIG_VIDEO is not set
 # CONFIG_VIDEO_SW_CURSOR is not set
diff --git a/configs/ls1021aqds_qspi_defconfig b/configs/ls1021aqds_qspi_defconfig
index db5b571ea2..08b9ec2c08 100644
--- a/configs/ls1021aqds_qspi_defconfig
+++ b/configs/ls1021aqds_qspi_defconfig
@@ -70,6 +70,6 @@ CONFIG_DM_USB=y
 CONFIG_USB_XHCI_HCD=y
 CONFIG_USB_XHCI_DWC3=y
 CONFIG_USB_STORAGE=y
-CONFIG_VIDEO_FSL_DCU_FB=y
-CONFIG_VIDEO=y
+# CONFIG_VIDEO_FSL_DCU_FB is not set
+# CONFIG_VIDEO is not set
 # CONFIG_VIDEO_SW_CURSOR is not set
diff --git a/configs/ls1021aqds_sdcard_ifc_defconfig b/configs/ls1021aqds_sdcard_ifc_defconfig
index 0d0fa68e83..ef194dfc82 100644
--- a/configs/ls1021aqds_sdcard_ifc_defconfig
+++ b/configs/ls1021aqds_sdcard_ifc_defconfig
@@ -84,6 +84,6 @@ CONFIG_DM_USB=y
 CONFIG_USB_XHCI_HCD=y
 CONFIG_USB_XHCI_DWC3=y
 CONFIG_USB_STORAGE=y
-CONFIG_VIDEO_FSL_DCU_FB=y
-CONFIG_VIDEO=y
+# CONFIG_VIDEO_FSL_DCU_FB is not set
+# CONFIG_VIDEO is not set
 # CONFIG_VIDEO_SW_CURSOR is not set
diff --git a/configs/ls1021aqds_sdcard_qspi_defconfig b/configs/ls1021aqds_sdcard_qspi_defconfig
index c322ee8ca4..e64cb38699 100644
--- a/configs/ls1021aqds_sdcard_qspi_defconfig
+++ b/configs/ls1021aqds_sdcard_qspi_defconfig
@@ -82,6 +82,6 @@ CONFIG_DM_USB=y
 CONFIG_USB_XHCI_HCD=y
 CONFIG_USB_XHCI_DWC3=y
 CONFIG_USB_STORAGE=y
-CONFIG_VIDEO_FSL_DCU_FB=y
-CONFIG_VIDEO=y
+# CONFIG_VIDEO_FSL_DCU_FB is not set
+# CONFIG_VIDEO is not set
 # CONFIG_VIDEO_SW_CURSOR is not set
-- 
2.17.1

[PATCH] ls1021aqds: disable obsolete VIDEO config

[Anatolij Gustschin]

On Sun, 18 Oct 2020 21:18:21 +0200
Anatolij Gustschin agust at denx.de wrote:

> DM_VIDEO conversion deadline has passed, disable VIDEO config.
> 
> Signed-off-by: Anatolij Gustschin <agust@denx.de>
> Cc: Alison Wang <alison.wang@nxp.com>
> ---
>  configs/ls1021aqds_ddr4_nor_defconfig        | 4 ++--
>  configs/ls1021aqds_ddr4_nor_lpuart_defconfig | 4 ++--
>  configs/ls1021aqds_nand_defconfig            | 4 ++--
>  configs/ls1021aqds_nor_SECURE_BOOT_defconfig | 4 ++--
>  configs/ls1021aqds_nor_defconfig             | 4 ++--
>  configs/ls1021aqds_nor_lpuart_defconfig      | 4 ++--
>  configs/ls1021aqds_qspi_defconfig            | 4 ++--
>  configs/ls1021aqds_sdcard_ifc_defconfig      | 4 ++--
>  configs/ls1021aqds_sdcard_qspi_defconfig     | 4 ++--
>  9 files changed, 18 insertions(+), 18 deletions(-)

Applied to u-boot-video/master.

[PATCH] ls1021atwr: disable obsolete VIDEO config

[Anatolij Gustschin]

DM_VIDEO conversion deadline has passed, disable VIDEO config.

Signed-off-by: Anatolij Gustschin <agust@denx.de>
---
 configs/ls1021atwr_nor_SECURE_BOOT_defconfig        | 4 ++--
 configs/ls1021atwr_nor_defconfig                    | 4 ++--
 configs/ls1021atwr_nor_lpuart_defconfig             | 4 ++--
 configs/ls1021atwr_qspi_defconfig                   | 4 ++--
 configs/ls1021atwr_sdcard_ifc_SECURE_BOOT_defconfig | 4 ++--
 configs/ls1021atwr_sdcard_ifc_defconfig             | 4 ++--
 configs/ls1021atwr_sdcard_qspi_defconfig            | 4 ++--
 7 files changed, 14 insertions(+), 14 deletions(-)

diff --git a/configs/ls1021atwr_nor_SECURE_BOOT_defconfig b/configs/ls1021atwr_nor_SECURE_BOOT_defconfig
index d62dcfa751..df99a75228 100644
--- a/configs/ls1021atwr_nor_SECURE_BOOT_defconfig
+++ b/configs/ls1021atwr_nor_SECURE_BOOT_defconfig
@@ -61,8 +61,8 @@ CONFIG_USB=y
 CONFIG_DM_USB=y
 CONFIG_USB_XHCI_HCD=y
 CONFIG_USB_XHCI_DWC3=y
-CONFIG_VIDEO_FSL_DCU_FB=y
-CONFIG_VIDEO=y
+# CONFIG_VIDEO_FSL_DCU_FB is not set
+# CONFIG_VIDEO is not set
 # CONFIG_VIDEO_SW_CURSOR is not set
 CONFIG_RSA=y
 CONFIG_SPL_RSA=y
diff --git a/configs/ls1021atwr_nor_defconfig b/configs/ls1021atwr_nor_defconfig
index f49a882e0a..a71f7b3ba7 100644
--- a/configs/ls1021atwr_nor_defconfig
+++ b/configs/ls1021atwr_nor_defconfig
@@ -65,6 +65,6 @@ CONFIG_USB=y
 CONFIG_DM_USB=y
 CONFIG_USB_XHCI_HCD=y
 CONFIG_USB_XHCI_DWC3=y
-CONFIG_VIDEO_FSL_DCU_FB=y
-CONFIG_VIDEO=y
+# CONFIG_VIDEO_FSL_DCU_FB is not set
+# CONFIG_VIDEO is not set
 # CONFIG_VIDEO_SW_CURSOR is not set
diff --git a/configs/ls1021atwr_nor_lpuart_defconfig b/configs/ls1021atwr_nor_lpuart_defconfig
index e75c7b43d2..d24b3682ed 100644
--- a/configs/ls1021atwr_nor_lpuart_defconfig
+++ b/configs/ls1021atwr_nor_lpuart_defconfig
@@ -66,6 +66,6 @@ CONFIG_USB=y
 CONFIG_DM_USB=y
 CONFIG_USB_XHCI_HCD=y
 CONFIG_USB_XHCI_DWC3=y
-CONFIG_VIDEO_FSL_DCU_FB=y
-CONFIG_VIDEO=y
+# CONFIG_VIDEO_FSL_DCU_FB is not set
+# CONFIG_VIDEO is not set
 # CONFIG_VIDEO_SW_CURSOR is not set
diff --git a/configs/ls1021atwr_qspi_defconfig b/configs/ls1021atwr_qspi_defconfig
index 767c364b3e..2b117304df 100644
--- a/configs/ls1021atwr_qspi_defconfig
+++ b/configs/ls1021atwr_qspi_defconfig
@@ -68,6 +68,6 @@ CONFIG_USB=y
 CONFIG_DM_USB=y
 CONFIG_USB_XHCI_HCD=y
 CONFIG_USB_XHCI_DWC3=y
-CONFIG_VIDEO_FSL_DCU_FB=y
-CONFIG_VIDEO=y
+# CONFIG_VIDEO_FSL_DCU_FB is not set
+# CONFIG_VIDEO is not set
 # CONFIG_VIDEO_SW_CURSOR is not set
diff --git a/configs/ls1021atwr_sdcard_ifc_SECURE_BOOT_defconfig b/configs/ls1021atwr_sdcard_ifc_SECURE_BOOT_defconfig
index 5b3ac2a348..70154bca0d 100644
--- a/configs/ls1021atwr_sdcard_ifc_SECURE_BOOT_defconfig
+++ b/configs/ls1021atwr_sdcard_ifc_SECURE_BOOT_defconfig
@@ -75,8 +75,8 @@ CONFIG_USB=y
 CONFIG_DM_USB=y
 CONFIG_USB_XHCI_HCD=y
 CONFIG_USB_XHCI_DWC3=y
-CONFIG_VIDEO_FSL_DCU_FB=y
-CONFIG_VIDEO=y
+# CONFIG_VIDEO_FSL_DCU_FB is not set
+# CONFIG_VIDEO is not set
 # CONFIG_VIDEO_SW_CURSOR is not set
 CONFIG_RSA=y
 CONFIG_SPL_RSA=y
diff --git a/configs/ls1021atwr_sdcard_ifc_defconfig b/configs/ls1021atwr_sdcard_ifc_defconfig
index 5cc0b90aa7..af2b5aafac 100644
--- a/configs/ls1021atwr_sdcard_ifc_defconfig
+++ b/configs/ls1021atwr_sdcard_ifc_defconfig
@@ -78,6 +78,6 @@ CONFIG_USB=y
 CONFIG_DM_USB=y
 CONFIG_USB_XHCI_HCD=y
 CONFIG_USB_XHCI_DWC3=y
-CONFIG_VIDEO_FSL_DCU_FB=y
-CONFIG_VIDEO=y
+# CONFIG_VIDEO_FSL_DCU_FB is not set
+# CONFIG_VIDEO is not set
 # CONFIG_VIDEO_SW_CURSOR is not set
diff --git a/configs/ls1021atwr_sdcard_qspi_defconfig b/configs/ls1021atwr_sdcard_qspi_defconfig
index e3e64f9790..dd80eb4a60 100644
--- a/configs/ls1021atwr_sdcard_qspi_defconfig
+++ b/configs/ls1021atwr_sdcard_qspi_defconfig
@@ -79,6 +79,6 @@ CONFIG_USB=y
 CONFIG_DM_USB=y
 CONFIG_USB_XHCI_HCD=y
 CONFIG_USB_XHCI_DWC3=y
-CONFIG_VIDEO_FSL_DCU_FB=y
-CONFIG_VIDEO=y
+# CONFIG_VIDEO_FSL_DCU_FB is not set
+# CONFIG_VIDEO is not set
 # CONFIG_VIDEO_SW_CURSOR is not set
-- 
2.17.1

[PATCH] ls1021atwr: disable obsolete VIDEO config

[Anatolij Gustschin]

On Sun, 18 Oct 2020 21:18:22 +0200
Anatolij Gustschin agust at denx.de wrote:

> DM_VIDEO conversion deadline has passed, disable VIDEO config.
> 
> Signed-off-by: Anatolij Gustschin <agust@denx.de>
> ---
>  configs/ls1021atwr_nor_SECURE_BOOT_defconfig        | 4 ++--
>  configs/ls1021atwr_nor_defconfig                    | 4 ++--
>  configs/ls1021atwr_nor_lpuart_defconfig             | 4 ++--
>  configs/ls1021atwr_qspi_defconfig                   | 4 ++--
>  configs/ls1021atwr_sdcard_ifc_SECURE_BOOT_defconfig | 4 ++--
>  configs/ls1021atwr_sdcard_ifc_defconfig             | 4 ++--
>  configs/ls1021atwr_sdcard_qspi_defconfig            | 4 ++--
>  7 files changed, 14 insertions(+), 14 deletions(-)

Applied to u-boot-video/master.

[PATCH] mx23evk: disable obsolete VIDEO config

[Anatolij Gustschin]

DM_VIDEO conversion deadline has passed, disable VIDEO config.

Signed-off-by: Anatolij Gustschin <agust@denx.de>
Cc: Otavio Salvador <otavio@ossystems.com.br>
---
 configs/mx23evk_defconfig | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/configs/mx23evk_defconfig b/configs/mx23evk_defconfig
index a5f7cc7f97..73d7e9b358 100644
--- a/configs/mx23evk_defconfig
+++ b/configs/mx23evk_defconfig
@@ -37,7 +37,7 @@ CONFIG_CONS_INDEX=0
 CONFIG_USB=y
 CONFIG_USB_EHCI_HCD=y
 CONFIG_USB_STORAGE=y
-CONFIG_VIDEO=y
+# CONFIG_VIDEO is not set
 CONFIG_SPLASH_SCREEN=y
 CONFIG_VIDEO_BMP_GZIP=y
 CONFIG_VIDEO_BMP_RLE8=y
-- 
2.17.1

[PATCH] mx23evk: disable obsolete VIDEO config

[Anatolij Gustschin]

On Sun, 18 Oct 2020 21:18:23 +0200
Anatolij Gustschin agust at denx.de wrote:

> DM_VIDEO conversion deadline has passed, disable VIDEO config.
> 
> Signed-off-by: Anatolij Gustschin <agust@denx.de>
> Cc: Otavio Salvador <otavio@ossystems.com.br>
> ---
>  configs/mx23evk_defconfig | 2 +-
>  1 file changed, 1 insertion(+), 1 deletion(-)

Applied to u-boot-video/master.

[PATCH] nokia_rx51: disable obsolete VIDEO config

[Anatolij Gustschin]

DM_VIDEO conversion deadline has passed, disable VIDEO config.

Signed-off-by: Anatolij Gustschin <agust@denx.de>
Cc: Pali Roh?r <pali@kernel.org>
---
 configs/nokia_rx51_defconfig | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/configs/nokia_rx51_defconfig b/configs/nokia_rx51_defconfig
index e249dff774..3310bc7ae9 100644
--- a/configs/nokia_rx51_defconfig
+++ b/configs/nokia_rx51_defconfig
@@ -54,8 +54,8 @@ CONFIG_USB_MUSB_HCD=y
 CONFIG_USB_MUSB_UDC=y
 CONFIG_USB_OMAP3=y
 CONFIG_TWL4030_USB=y
-CONFIG_VIDEO=y
-CONFIG_CFB_CONSOLE_ANSI=y
+# CONFIG_VIDEO is not set
+# CONFIG_CFB_CONSOLE_ANSI is not set
 # CONFIG_VGA_AS_SINGLE_DEVICE is not set
 CONFIG_SPLASH_SCREEN=y
 # CONFIG_GZIP is not set
-- 
2.17.1

[PATCH] nokia_rx51: disable obsolete VIDEO config

[Pali Rohár]

On Sunday 18 October 2020 21:18:24 Anatolij Gustschin wrote:
> DM_VIDEO conversion deadline has passed, disable VIDEO config.
> 
> Signed-off-by: Anatolij Gustschin <agust@denx.de>
> Cc: Pali Roh?r <pali@kernel.org>
> ---
>  configs/nokia_rx51_defconfig | 4 ++--
>  1 file changed, 2 insertions(+), 2 deletions(-)
> 
> diff --git a/configs/nokia_rx51_defconfig b/configs/nokia_rx51_defconfig
> index e249dff774..3310bc7ae9 100644
> --- a/configs/nokia_rx51_defconfig
> +++ b/configs/nokia_rx51_defconfig
> @@ -54,8 +54,8 @@ CONFIG_USB_MUSB_HCD=y
>  CONFIG_USB_MUSB_UDC=y
>  CONFIG_USB_OMAP3=y
>  CONFIG_TWL4030_USB=y
> -CONFIG_VIDEO=y
> -CONFIG_CFB_CONSOLE_ANSI=y

Please, do not disable CONFIG_CFB_CONSOLE_ANSI, it will make debugging
on real Nokia N900 very hard...

> +# CONFIG_VIDEO is not set
> +# CONFIG_CFB_CONSOLE_ANSI is not set
>  # CONFIG_VGA_AS_SINGLE_DEVICE is not set
>  CONFIG_SPLASH_SCREEN=y
>  # CONFIG_GZIP is not set
> -- 
> 2.17.1
> 

[PATCH] nokia_rx51: disable obsolete VIDEO config

[Anatolij Gustschin]

On Sun, 18 Oct 2020 22:41:30 +0200
Pali Roh?r pali at kernel.org wrote:

> > -CONFIG_VIDEO=y
> > -CONFIG_CFB_CONSOLE_ANSI=y  
> 
> Please, do not disable CONFIG_CFB_CONSOLE_ANSI, it will make debugging
> on real Nokia N900 very hard...

the patch completely disables video console support, so there is no
use for CONFIG_CFB_CONSOLE_ANSI. The reason is that it has not been
converted to DM_VIDEO. The conversion deadline was 2019.07 an nobody
cared to do it, so I'm going to apply the patch for v2021.01.
If you need video console support, then please convert to DM_VIDEO.

Thanks,
Anatolij

[PATCH] nokia_rx51: disable obsolete VIDEO config

[Pali Rohár]

On Sunday 18 October 2020 22:54:41 Anatolij Gustschin wrote:
> If you need video console support, then please convert to DM_VIDEO.

Ok, but I'm waiting until other N900 issues are fixed. There are pending
patches which needs to be reviewed and merged.

Without video console support it is hard and probably impossible to
debug on real N900.

So do not disable video console support, it would make fixing and
testing N900 stuff just more complicated.

[PATCH] nokia_rx51: disable obsolete VIDEO config

[Tom Rini]

On Sun, Oct 18, 2020 at 10:59:36PM +0200, Pali Roh?r wrote:
> On Sunday 18 October 2020 22:54:41 Anatolij Gustschin wrote:
> > If you need video console support, then please convert to DM_VIDEO.
> 
> Ok, but I'm waiting until other N900 issues are fixed. There are pending
> patches which needs to be reviewed and merged.

Can you please list which?  And is that all of them or are there other
issues still?

> Without video console support it is hard and probably impossible to
> debug on real N900.
> 
> So do not disable video console support, it would make fixing and
> testing N900 stuff just more complicated.

Then please see about converting the video driver, on top of the
other patches.  Thanks!

-- 
Tom
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 659 bytes
Desc: not available
URL: <https://lists.denx.de/pipermail/u-boot/attachments/20201018/f1e51367/attachment.sig>

[PATCH] nokia_rx51: disable obsolete VIDEO config

[Pali Rohár]

Hello!

On Sunday 18 October 2020 21:17:43 Tom Rini wrote:
> On Sun, Oct 18, 2020 at 10:59:36PM +0200, Pali Roh?r wrote:
> > On Sunday 18 October 2020 22:54:41 Anatolij Gustschin wrote:
> > > If you need video console support, then please convert to DM_VIDEO.
> > 
> > Ok, but I'm waiting until other N900 issues are fixed. There are pending
> > patches which needs to be reviewed and merged.
> 
> Can you please list which?

U-Boot is crashing and board is automatically rebooted:

https://lists.denx.de/pipermail/u-boot/2020-August/422968.html

Last email in that thread:

https://lists.denx.de/pipermail/u-boot/2020-September/427704.html

> And is that all of them or are there other
> issues still?

Except above, there is another issue with i2c, details are here:

https://lists.denx.de/pipermail/u-boot/2020-April/408526.html

(but even without fixing this issue U-Boot works and can boot kernel,
just it is slower)

> > Without video console support it is hard and probably impossible to
> > debug on real N900.
> > 
> > So do not disable video console support, it would make fixing and
> > testing N900 stuff just more complicated.
> 
> Then please see about converting the video driver, on top of the
> other patches.  Thanks!
> 
> -- 
> Tom

[PATCH] nokia_rx51: disable obsolete VIDEO config

[Tom Rini]

On Tue, Oct 20, 2020 at 11:30:51AM +0200, Pali Roh?r wrote:
> Hello!
> 
> On Sunday 18 October 2020 21:17:43 Tom Rini wrote:
> > On Sun, Oct 18, 2020 at 10:59:36PM +0200, Pali Roh?r wrote:
> > > On Sunday 18 October 2020 22:54:41 Anatolij Gustschin wrote:
> > > > If you need video console support, then please convert to DM_VIDEO.
> > > 
> > > Ok, but I'm waiting until other N900 issues are fixed. There are pending
> > > patches which needs to be reviewed and merged.
> > 
> > Can you please list which?
> 
> U-Boot is crashing and board is automatically rebooted:
> 
> https://lists.denx.de/pipermail/u-boot/2020-August/422968.html
> 
> Last email in that thread:
> 
> https://lists.denx.de/pipermail/u-boot/2020-September/427704.html

So there's the unresolved MMC issue, but you can work-around that it
sounded like?

> > And is that all of them or are there other
> > issues still?
> 
> Except above, there is another issue with i2c, details are here:
> 
> https://lists.denx.de/pipermail/u-boot/2020-April/408526.html
> 
> (but even without fixing this issue U-Boot works and can boot kernel,
> just it is slower)
> 
> > > Without video console support it is hard and probably impossible to
> > > debug on real N900.
> > > 
> > > So do not disable video console support, it would make fixing and
> > > testing N900 stuff just more complicated.
> > 
> > Then please see about converting the video driver, on top of the
> > other patches.  Thanks!

So, perhaps another way to look at this (and the rest of the series) is,
Anatolij, what needs updating for these platforms?  Is it that no DM
conversion has been done for them, or not enabling CONFIG_DM_VIDEO?  It
looks like for the nokia_rx51 there's no CONFIG_DM conversion done at
all yet, which is the bigger problem.   But what about sunxi?  Is there
some video specific conversions that need to happen, or just enabling
different options once DM is enabled?  Thanks!

-- 
Tom
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 659 bytes
Desc: not available
URL: <https://lists.denx.de/pipermail/u-boot/attachments/20201020/575f09e5/attachment.sig>

[PATCH] nokia_rx51: disable obsolete VIDEO config

[Anatolij Gustschin]

On Tue, 20 Oct 2020 10:17:07 -0400
Tom Rini trini at konsulko.com wrote:
...
> > > > Without video console support it is hard and probably impossible to
> > > > debug on real N900.
> > > > 
> > > > So do not disable video console support, it would make fixing and
> > > > testing N900 stuff just more complicated.  
> > > 
> > > Then please see about converting the video driver, on top of the
> > > other patches.  Thanks!  
> 
> So, perhaps another way to look at this (and the rest of the series) is,
> Anatolij, what needs updating for these platforms?  Is it that no DM
> conversion has been done for them, or not enabling CONFIG_DM_VIDEO?

for at91sam9, ls1021aqds, ls1021atwr, mx6sxsabresd, mx7dsabresd and many
sunxi boards DM_VIDEO conversion is missing.

nokia_rx51 has DM disabled, so this is a bigger problem. And CONFIG_VIDEO
can be disabled for nokia_rx51 if we remove CFB_CONSOLE CONFIG_VIDEO
dependency in Kconfig, it seems. This board doesn't use display controller
driver, it just configures fixed frame buffer address for CFB_CONSOLE.

No DM yet: mx23evk, sansa_fuze_plus, xfi3

> It looks like for the nokia_rx51 there's no CONFIG_DM conversion done at
> all yet, which is the bigger problem.   But what about sunxi?  Is there
> some video specific conversions that need to happen, or just enabling
> different options once DM is enabled?  Thanks!

for many sunxi variants DM_VIDEO conversion is missing. Jagan did
a patch [1], but there are some simplefb related issues with it.

[1] http://patchwork.ozlabs.org/project/uboot/patch/20200617202437.301108-4-jagan at amarulasolutions.com

--
Anatolij

[PATCH] nokia_rx51: disable obsolete VIDEO config

[Pali Rohár]

On Tuesday 20 October 2020 10:17:07 Tom Rini wrote:
> On Tue, Oct 20, 2020 at 11:30:51AM +0200, Pali Roh?r wrote:
> > Hello!
> > 
> > On Sunday 18 October 2020 21:17:43 Tom Rini wrote:
> > > On Sun, Oct 18, 2020 at 10:59:36PM +0200, Pali Roh?r wrote:
> > > > On Sunday 18 October 2020 22:54:41 Anatolij Gustschin wrote:
> > > > > If you need video console support, then please convert to DM_VIDEO.
> > > > 
> > > > Ok, but I'm waiting until other N900 issues are fixed. There are pending
> > > > patches which needs to be reviewed and merged.
> > > 
> > > Can you please list which?
> > 
> > U-Boot is crashing and board is automatically rebooted:
> > 
> > https://lists.denx.de/pipermail/u-boot/2020-August/422968.html
> > 
> > Last email in that thread:
> > 
> > https://lists.denx.de/pipermail/u-boot/2020-September/427704.html
> 
> So there's the unresolved MMC issue, but you can work-around that it
> sounded like?

Yes, there is mmc issue, I have found which commit caused it and
because nobody was able to debug / understand what is happening I have
sent revert patch, which fixes that issue, until somebody solve issue in
original patch.

But I do not see any progress on either applying revert patch or fixing
original patch.

And I do not like to have custom patch in my local branch (and
periodically rebasing it) as it just another layer of complication.

Could we move somehow in this issue?

[PATCH] nokia_rx51: disable obsolete VIDEO config

[Tom Rini]

On Wed, Oct 21, 2020 at 11:08:37AM +0200, Pali Roh?r wrote:
> On Tuesday 20 October 2020 10:17:07 Tom Rini wrote:
> > On Tue, Oct 20, 2020 at 11:30:51AM +0200, Pali Roh?r wrote:
> > > Hello!
> > > 
> > > On Sunday 18 October 2020 21:17:43 Tom Rini wrote:
> > > > On Sun, Oct 18, 2020 at 10:59:36PM +0200, Pali Roh?r wrote:
> > > > > On Sunday 18 October 2020 22:54:41 Anatolij Gustschin wrote:
> > > > > > If you need video console support, then please convert to DM_VIDEO.
> > > > > 
> > > > > Ok, but I'm waiting until other N900 issues are fixed. There are pending
> > > > > patches which needs to be reviewed and merged.
> > > > 
> > > > Can you please list which?
> > > 
> > > U-Boot is crashing and board is automatically rebooted:
> > > 
> > > https://lists.denx.de/pipermail/u-boot/2020-August/422968.html
> > > 
> > > Last email in that thread:
> > > 
> > > https://lists.denx.de/pipermail/u-boot/2020-September/427704.html
> > 
> > So there's the unresolved MMC issue, but you can work-around that it
> > sounded like?
> 
> Yes, there is mmc issue, I have found which commit caused it and
> because nobody was able to debug / understand what is happening I have
> sent revert patch, which fixes that issue, until somebody solve issue in
> original patch.
> 
> But I do not see any progress on either applying revert patch or fixing
> original patch.
> 
> And I do not like to have custom patch in my local branch (and
> periodically rebasing it) as it just another layer of complication.
> 
> Could we move somehow in this issue?

No, it's probably stuck until you can fix the problem or otherwise add a
"quirk" for your platform.  What does Linux do in this case?

-- 
Tom
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 659 bytes
Desc: not available
URL: <https://lists.denx.de/pipermail/u-boot/attachments/20201021/ccaa32bf/attachment.sig>

[PATCH] nokia_rx51: disable obsolete VIDEO config

[Pali Rohár]

On Wednesday 21 October 2020 08:47:02 Tom Rini wrote:
> On Wed, Oct 21, 2020 at 11:08:37AM +0200, Pali Roh?r wrote:
> > On Tuesday 20 October 2020 10:17:07 Tom Rini wrote:
> > > On Tue, Oct 20, 2020 at 11:30:51AM +0200, Pali Roh?r wrote:
> > > > Hello!
> > > > 
> > > > On Sunday 18 October 2020 21:17:43 Tom Rini wrote:
> > > > > On Sun, Oct 18, 2020 at 10:59:36PM +0200, Pali Roh?r wrote:
> > > > > > On Sunday 18 October 2020 22:54:41 Anatolij Gustschin wrote:
> > > > > > > If you need video console support, then please convert to DM_VIDEO.
> > > > > > 
> > > > > > Ok, but I'm waiting until other N900 issues are fixed. There are pending
> > > > > > patches which needs to be reviewed and merged.
> > > > > 
> > > > > Can you please list which?
> > > > 
> > > > U-Boot is crashing and board is automatically rebooted:
> > > > 
> > > > https://lists.denx.de/pipermail/u-boot/2020-August/422968.html
> > > > 
> > > > Last email in that thread:
> > > > 
> > > > https://lists.denx.de/pipermail/u-boot/2020-September/427704.html
> > > 
> > > So there's the unresolved MMC issue, but you can work-around that it
> > > sounded like?
> > 
> > Yes, there is mmc issue, I have found which commit caused it and
> > because nobody was able to debug / understand what is happening I have
> > sent revert patch, which fixes that issue, until somebody solve issue in
> > original patch.
> > 
> > But I do not see any progress on either applying revert patch or fixing
> > original patch.
> > 
> > And I do not like to have custom patch in my local branch (and
> > periodically rebasing it) as it just another layer of complication.
> > 
> > Could we move somehow in this issue?
> 
> No, it's probably stuck until you can fix the problem or otherwise add a
> "quirk" for your platform.  What does Linux do in this case?

Well, I provided all requested information, just I'm lacking any new
response from developers / maintainers of particular code.

I have already identified problematic place / commit and I have already
sent revert patch which fixing this issue.

Tom, what else do you need?

I see the main issue now that nobody reviewed / merged patch and nobody
responded to emails which I have sent more then 2 months ago.

[maemo-leste] [PATCH] nokia_rx51: disable obsolete VIDEO config

[Tom Rini]

On Sat, Oct 24, 2020 at 12:46:45PM +0200, Merlijn Wajer wrote:
> Hi,
> 
> On 24/10/2020 12:06, Pali Roh?r wrote:
> > On Wednesday 21 October 2020 08:47:02 Tom Rini wrote:
> >> On Wed, Oct 21, 2020 at 11:08:37AM +0200, Pali Roh?r wrote:
> >>> On Tuesday 20 October 2020 10:17:07 Tom Rini wrote:
> >>>> On Tue, Oct 20, 2020 at 11:30:51AM +0200, Pali Roh?r wrote:
> <snip>
> >>> Yes, there is mmc issue, I have found which commit caused it and
> >>> because nobody was able to debug / understand what is happening I have
> >>> sent revert patch, which fixes that issue, until somebody solve issue in
> >>> original patch.
> >>>
> >>> But I do not see any progress on either applying revert patch or fixing
> >>> original patch.
> >>>
> >>> And I do not like to have custom patch in my local branch (and
> >>> periodically rebasing it) as it just another layer of complication.
> >>>
> >>> Could we move somehow in this issue?
> >>
> >> No, it's probably stuck until you can fix the problem or otherwise add a
> >> "quirk" for your platform.  What does Linux do in this case?
> > 
> > Well, I provided all requested information, just I'm lacking any new
> > response from developers / maintainers of particular code.
> > 
> > I have already identified problematic place / commit and I have already
> > sent revert patch which fixing this issue.
> > 
> > Tom, what else do you need?
> > 
> > I see the main issue now that nobody reviewed / merged patch and nobody
> > responded to emails which I have sent more then 2 months ago.
> 
> I would like to add my voice for reverting the patches that break the
> support, and work from that point to improve support and eventually
> migrate to DT.
> 
> Maemo Leste has a lot of Nokia N900 users, and this is blocking us from
> moving to mainline u-boot. Is it possible to get the opinion of the
> original patch authors on this?
> 
> I am set up with a serial module on the Nokia N900, so I can help
> provide specific debug info.

Let me add in the TI folks that might be able to look in to any of this
today.  But the next problem is that the rx51 needs to be converted to
use DM in U-Boot.  It's throwing up a ton of "you need to convert to X
by <some release in 2019> or this board may be removed" warnings at
build.  I really really want to see some of this start to be addressed.

-- 
Tom
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 659 bytes
Desc: not available
URL: <https://lists.denx.de/pipermail/u-boot/attachments/20201024/451396d9/attachment.sig>

[maemo-leste] [PATCH] nokia_rx51: disable obsolete VIDEO config

[Pali Rohár]

On Saturday 24 October 2020 08:19:31 Tom Rini wrote:
> Let me add in the TI folks that might be able to look in to any of this
> today.  But the next problem is that the rx51 needs to be converted to
> use DM in U-Boot.  It's throwing up a ton of "you need to convert to X
> by <some release in 2019> or this board may be removed" warnings at
> build.  I really really want to see some of this start to be addressed.

Well, I do not see any warnings at build, I'm building U-Boot by command:

$ make nokia_rx51_defconfig && make SOURCE_DATE_EPOCH=0 ARCH=arm CROSS_COMPILE=arm-linux-gnueabi- u-boot.bin

Maybe I'm doing something wrong that I do not see it? Or is there any
other way to "list all issues for N900" which needs to be addressed?

Anyway, I'm looking at DM and as the first step I will do conversion of
code to CONFIG_DM_I2C. It is OK for you? Maybe it brings some light to
non-working second i2c bus.

I hope that TI (or other) developers look at that mmc issue as this is
blocking all N900 users.

[maemo-leste] [PATCH] nokia_rx51: disable obsolete VIDEO config

[Tom Rini]

On Mon, Oct 26, 2020 at 12:04:54AM +0100, Pali Roh?r wrote:
> On Saturday 24 October 2020 08:19:31 Tom Rini wrote:
> > Let me add in the TI folks that might be able to look in to any of this
> > today.  But the next problem is that the rx51 needs to be converted to
> > use DM in U-Boot.  It's throwing up a ton of "you need to convert to X
> > by <some release in 2019> or this board may be removed" warnings at
> > build.  I really really want to see some of this start to be addressed.
> 
> Well, I do not see any warnings at build, I'm building U-Boot by command:
> 
> $ make nokia_rx51_defconfig && make SOURCE_DATE_EPOCH=0 ARCH=arm CROSS_COMPILE=arm-linux-gnueabi- u-boot.bin

Note that ARCH=arm is meaningless in U-Boot.

> Maybe I'm doing something wrong that I do not see it? Or is there any
> other way to "list all issues for N900" which needs to be addressed?

Yes, the "all" target.

> Anyway, I'm looking at DM and as the first step I will do conversion of
> code to CONFIG_DM_I2C. It is OK for you? Maybe it brings some light to
> non-working second i2c bus.
> 
> I hope that TI (or other) developers look at that mmc issue as this is
> blocking all N900 users.

Maybe converting to DM_MMC will also clear up or shed more light on the
problem you have there as well.

-- 
Tom
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 659 bytes
Desc: not available
URL: <https://lists.denx.de/pipermail/u-boot/attachments/20201025/2764bd23/attachment.sig>

[maemo-leste] [PATCH] nokia_rx51: disable obsolete VIDEO config

[Pali Rohár]

On Sunday 25 October 2020 19:55:28 Tom Rini wrote:
> On Mon, Oct 26, 2020 at 12:04:54AM +0100, Pali Roh?r wrote:
> > On Saturday 24 October 2020 08:19:31 Tom Rini wrote:
> > > Let me add in the TI folks that might be able to look in to any of this
> > > today.  But the next problem is that the rx51 needs to be converted to
> > > use DM in U-Boot.  It's throwing up a ton of "you need to convert to X
> > > by <some release in 2019> or this board may be removed" warnings at
> > > build.  I really really want to see some of this start to be addressed.
> > 
> > Well, I do not see any warnings at build, I'm building U-Boot by command:
> > 
> > $ make nokia_rx51_defconfig && make SOURCE_DATE_EPOCH=0 ARCH=arm CROSS_COMPILE=arm-linux-gnueabi- u-boot.bin
> 
> Note that ARCH=arm is meaningless in U-Boot.
> 
> > Maybe I'm doing something wrong that I do not see it? Or is there any
> > other way to "list all issues for N900" which needs to be addressed?
> 
> Yes, the "all" target.

Ok, now I see them! I used in all my scripts only u-boot.bin target (as
I needed only this one binary), so basically all warnings were perfectly
hidden also in past and I did not know about it...

Maybe there are more people who do not know about these warnings? What
about printing them as part of u-boot.bin target?

> > Anyway, I'm looking at DM and as the first step I will do conversion of
> > code to CONFIG_DM_I2C. It is OK for you? Maybe it brings some light to
> > non-working second i2c bus.
> > 
> > I hope that TI (or other) developers look at that mmc issue as this is
> > blocking all N900 users.
> 
> Maybe converting to DM_MMC will also clear up or shed more light on the
> problem you have there as well.
> 
> -- 
> Tom

[maemo-leste] [PATCH] nokia_rx51: disable obsolete VIDEO config

[Tom Rini]

On Mon, Oct 26, 2020 at 01:19:43AM +0100, Pali Roh?r wrote:
> On Sunday 25 October 2020 19:55:28 Tom Rini wrote:
> > On Mon, Oct 26, 2020 at 12:04:54AM +0100, Pali Roh?r wrote:
> > > On Saturday 24 October 2020 08:19:31 Tom Rini wrote:
> > > > Let me add in the TI folks that might be able to look in to any of this
> > > > today.  But the next problem is that the rx51 needs to be converted to
> > > > use DM in U-Boot.  It's throwing up a ton of "you need to convert to X
> > > > by <some release in 2019> or this board may be removed" warnings at
> > > > build.  I really really want to see some of this start to be addressed.
> > > 
> > > Well, I do not see any warnings at build, I'm building U-Boot by command:
> > > 
> > > $ make nokia_rx51_defconfig && make SOURCE_DATE_EPOCH=0 ARCH=arm CROSS_COMPILE=arm-linux-gnueabi- u-boot.bin
> > 
> > Note that ARCH=arm is meaningless in U-Boot.
> > 
> > > Maybe I'm doing something wrong that I do not see it? Or is there any
> > > other way to "list all issues for N900" which needs to be addressed?
> > 
> > Yes, the "all" target.
> 
> Ok, now I see them! I used in all my scripts only u-boot.bin target (as
> I needed only this one binary), so basically all warnings were perfectly
> hidden also in past and I did not know about it...
> 
> Maybe there are more people who do not know about these warnings? What
> about printing them as part of u-boot.bin target?

I was wondering about that too, but I'm not sure.

-- 
Tom
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 659 bytes
Desc: not available
URL: <https://lists.denx.de/pipermail/u-boot/attachments/20201025/c32dcb6d/attachment-0001.sig>

[maemo-leste] [PATCH] nokia_rx51: disable obsolete VIDEO config

[Anatolij Gustschin]

On Mon, 26 Oct 2020 00:04:54 +0100
Pali Roh?r pali at kernel.org wrote:
...
> Maybe I'm doing something wrong that I do not see it? Or is there any
> other way to "list all issues for N900" which needs to be addressed?

$ ./tools/buildman/buildman nokia_rx51
Building current source for 1 boards (1 thread, 12 jobs per thread)
       arm:  w+   nokia_rx51                
+===================== WARNING ======================
+This board does not use CONFIG_DM. CONFIG_DM will be
+compulsory starting with the v2020.01 release.
+Failure to update may result in board removal.
+See doc/driver-model/migration.rst for more info.
+====================================================
+This board does not use CONFIG_DM_MMC. Please update
+the board to use CONFIG_DM_MMC before the v2019.04 release.
+Failure to update by the deadline may result in board removal.
+This board does not use CONFIG_DM_USB. Please update
+the board to use CONFIG_DM_USB before the v2019.07 release.
+This board does not use CONFIG_DM_VIDEO Please update
+the board to use CONFIG_DM_VIDEO before the v2019.07 release.
+This board does not use CONFIG_WDT (DM watchdog support).
+Please update the board to use CONFIG_WDT before the
+v2019.10 release.
    0    1    0 /1              nokia_rx51
Completed: 1 total built, duration 0:00:04, rate 0.25

--
Anatolij

[maemo-leste] [PATCH] nokia_rx51: disable obsolete VIDEO config

[Lokesh Vutla]

On 24/10/20 5:49 pm, Tom Rini wrote:
> On Sat, Oct 24, 2020 at 12:46:45PM +0200, Merlijn Wajer wrote:
>> Hi,
>>
>> On 24/10/2020 12:06, Pali Roh?r wrote:
>>> On Wednesday 21 October 2020 08:47:02 Tom Rini wrote:
>>>> On Wed, Oct 21, 2020 at 11:08:37AM +0200, Pali Roh?r wrote:
>>>>> On Tuesday 20 October 2020 10:17:07 Tom Rini wrote:
>>>>>> On Tue, Oct 20, 2020 at 11:30:51AM +0200, Pali Roh?r wrote:
>> <snip>
>>>>> Yes, there is mmc issue, I have found which commit caused it and
>>>>> because nobody was able to debug / understand what is happening I have
>>>>> sent revert patch, which fixes that issue, until somebody solve issue in
>>>>> original patch.
>>>>>
>>>>> But I do not see any progress on either applying revert patch or fixing
>>>>> original patch.
>>>>>
>>>>> And I do not like to have custom patch in my local branch (and
>>>>> periodically rebasing it) as it just another layer of complication.
>>>>>
>>>>> Could we move somehow in this issue?
>>>>
>>>> No, it's probably stuck until you can fix the problem or otherwise add a
>>>> "quirk" for your platform.  What does Linux do in this case?
>>>
>>> Well, I provided all requested information, just I'm lacking any new
>>> response from developers / maintainers of particular code.
>>>
>>> I have already identified problematic place / commit and I have already
>>> sent revert patch which fixing this issue.
>>>
>>> Tom, what else do you need?
>>>
>>> I see the main issue now that nobody reviewed / merged patch and nobody
>>> responded to emails which I have sent more then 2 months ago.
>>
>> I would like to add my voice for reverting the patches that break the
>> support, and work from that point to improve support and eventually
>> migrate to DT.
>>
>> Maemo Leste has a lot of Nokia N900 users, and this is blocking us from
>> moving to mainline u-boot. Is it possible to get the opinion of the
>> original patch authors on this?
>>
>> I am set up with a serial module on the Nokia N900, so I can help
>> provide specific debug info.
> 
> Let me add in the TI folks that might be able to look in to any of this
> today.  But the next problem is that the rx51 needs to be converted to
> use DM in U-Boot.  It's throwing up a ton of "you need to convert to X
> by <some release in 2019> or this board may be removed" warnings at
> build.  I really really want to see some of this start to be addressed.


IIUC, the breakage is happening in non-DM code. I don't think non-DM code is
maintained anymore for mmc. As Tom suggested we should start using DM for Nokia RX51

Thanks and regards,
Lokesh
> 

[maemo-leste] [PATCH] nokia_rx51: disable obsolete VIDEO config

[Pali Rohár]

On Thursday 29 October 2020 14:06:30 Lokesh Vutla wrote:
> On 24/10/20 5:49 pm, Tom Rini wrote:
> > On Sat, Oct 24, 2020 at 12:46:45PM +0200, Merlijn Wajer wrote:
> >> Hi,
> >>
> >> On 24/10/2020 12:06, Pali Roh?r wrote:
> >>> On Wednesday 21 October 2020 08:47:02 Tom Rini wrote:
> >>>> On Wed, Oct 21, 2020 at 11:08:37AM +0200, Pali Roh?r wrote:
> >>>>> On Tuesday 20 October 2020 10:17:07 Tom Rini wrote:
> >>>>>> On Tue, Oct 20, 2020 at 11:30:51AM +0200, Pali Roh?r wrote:
> >> <snip>
> >>>>> Yes, there is mmc issue, I have found which commit caused it and
> >>>>> because nobody was able to debug / understand what is happening I have
> >>>>> sent revert patch, which fixes that issue, until somebody solve issue in
> >>>>> original patch.
> >>>>>
> >>>>> But I do not see any progress on either applying revert patch or fixing
> >>>>> original patch.
> >>>>>
> >>>>> And I do not like to have custom patch in my local branch (and
> >>>>> periodically rebasing it) as it just another layer of complication.
> >>>>>
> >>>>> Could we move somehow in this issue?
> >>>>
> >>>> No, it's probably stuck until you can fix the problem or otherwise add a
> >>>> "quirk" for your platform.  What does Linux do in this case?
> >>>
> >>> Well, I provided all requested information, just I'm lacking any new
> >>> response from developers / maintainers of particular code.
> >>>
> >>> I have already identified problematic place / commit and I have already
> >>> sent revert patch which fixing this issue.
> >>>
> >>> Tom, what else do you need?
> >>>
> >>> I see the main issue now that nobody reviewed / merged patch and nobody
> >>> responded to emails which I have sent more then 2 months ago.
> >>
> >> I would like to add my voice for reverting the patches that break the
> >> support, and work from that point to improve support and eventually
> >> migrate to DT.
> >>
> >> Maemo Leste has a lot of Nokia N900 users, and this is blocking us from
> >> moving to mainline u-boot. Is it possible to get the opinion of the
> >> original patch authors on this?
> >>
> >> I am set up with a serial module on the Nokia N900, so I can help
> >> provide specific debug info.
> > 
> > Let me add in the TI folks that might be able to look in to any of this
> > today.  But the next problem is that the rx51 needs to be converted to
> > use DM in U-Boot.  It's throwing up a ton of "you need to convert to X
> > by <some release in 2019> or this board may be removed" warnings at
> > build.  I really really want to see some of this start to be addressed.
> 
> 
> IIUC, the breakage is happening in non-DM code.

No, this code is not non-DM specific. It is used also for DM builds.

[PATCH v2] nokia_rx51: disable obsolete VIDEO config

[Anatolij Gustschin]

Disable VIDEO config to fix DM_VIDEO conversion
deadline warning.

Signed-off-by: Anatolij Gustschin <agust@denx.de>
Cc: Pali Roh?r <pali@kernel.org>
---

Changes in v2:
 - select CFB_CONSOLE instead of VIDEO to let video console
   support enabled

 configs/nokia_rx51_defconfig | 2 +-
 drivers/video/Kconfig        | 2 +-
 2 files changed, 2 insertions(+), 2 deletions(-)

diff --git a/configs/nokia_rx51_defconfig b/configs/nokia_rx51_defconfig
index e249dff774..b0a58e5253 100644
--- a/configs/nokia_rx51_defconfig
+++ b/configs/nokia_rx51_defconfig
@@ -54,7 +54,7 @@ CONFIG_USB_MUSB_HCD=y
 CONFIG_USB_MUSB_UDC=y
 CONFIG_USB_OMAP3=y
 CONFIG_TWL4030_USB=y
-CONFIG_VIDEO=y
+CONFIG_CFB_CONSOLE=y
 CONFIG_CFB_CONSOLE_ANSI=y
 # CONFIG_VGA_AS_SINGLE_DEVICE is not set
 CONFIG_SPLASH_SCREEN=y
diff --git a/drivers/video/Kconfig b/drivers/video/Kconfig
index 2f3bb4b085..998271b9b6 100644
--- a/drivers/video/Kconfig
+++ b/drivers/video/Kconfig
@@ -665,7 +665,7 @@ config VIDEO
 
 config CFB_CONSOLE
 	bool "Enable colour frame buffer console"
-	depends on VIDEO
+	depends on VIDEO || ARCH_OMAP2PLUS
 	default y if VIDEO
 	help
 	  Enables the colour frame buffer driver. This supports colour
-- 
2.17.1

[PATCH v2] nokia_rx51: disable obsolete VIDEO config

[Anatolij Gustschin]

On Mon, 26 Oct 2020 19:58:20 +0100
Anatolij Gustschin agust at denx.de wrote:

> Disable VIDEO config to fix DM_VIDEO conversion
> deadline warning.
> 
> Signed-off-by: Anatolij Gustschin <agust@denx.de>
> Cc: Pali Roh?r <pali@kernel.org>
> ---
> 
> Changes in v2:
>  - select CFB_CONSOLE instead of VIDEO to let video console
>    support enabled
> 
>  configs/nokia_rx51_defconfig | 2 +-
>  drivers/video/Kconfig        | 2 +-
>  2 files changed, 2 insertions(+), 2 deletions(-)

Applied to u-boot-video/master.

[PATCH v2] nokia_rx51: disable obsolete VIDEO config

[Pali Rohár]

On Monday 26 October 2020 19:58:20 Anatolij Gustschin wrote:
> Disable VIDEO config to fix DM_VIDEO conversion
> deadline warning.
> 
> Signed-off-by: Anatolij Gustschin <agust@denx.de>
> Cc: Pali Roh?r <pali@kernel.org>
> ---
> 
> Changes in v2:
>  - select CFB_CONSOLE instead of VIDEO to let video console
>    support enabled
> 
>  configs/nokia_rx51_defconfig | 2 +-
>  drivers/video/Kconfig        | 2 +-
>  2 files changed, 2 insertions(+), 2 deletions(-)
> 
> diff --git a/configs/nokia_rx51_defconfig b/configs/nokia_rx51_defconfig
> index e249dff774..b0a58e5253 100644
> --- a/configs/nokia_rx51_defconfig
> +++ b/configs/nokia_rx51_defconfig
> @@ -54,7 +54,7 @@ CONFIG_USB_MUSB_HCD=y
>  CONFIG_USB_MUSB_UDC=y
>  CONFIG_USB_OMAP3=y
>  CONFIG_TWL4030_USB=y
> -CONFIG_VIDEO=y
> +CONFIG_CFB_CONSOLE=y
>  CONFIG_CFB_CONSOLE_ANSI=y
>  # CONFIG_VGA_AS_SINGLE_DEVICE is not set
>  CONFIG_SPLASH_SCREEN=y

Hello! This change is disabling CONFIG_CONSOLE_MUX option.

Could you please do not disable it? It is needed for debugging via qemu:
https://gitlab.denx.de/u-boot/u-boot/-/commit/07693ccb1574adecb9e87756339442955aeaf346

Here is difference of .config file without (.old) and with your patch:

--- .config.old	2020-10-27 00:43:11.560525550 +0100
+++ .config	2020-10-27 00:45:17.381359170 +0100
@@ -322,8 +322,8 @@ CONFIG_SPL_LOGLEVEL=4
 CONFIG_TPL_LOGLEVEL=4
 # CONFIG_SILENT_CONSOLE is not set
 # CONFIG_PRE_CONSOLE_BUFFER is not set
-CONFIG_CONSOLE_MUX=y
-CONFIG_SYS_CONSOLE_IS_IN_ENV=y
+# CONFIG_CONSOLE_MUX is not set
+# CONFIG_SYS_CONSOLE_IS_IN_ENV is not set
 # CONFIG_SYS_CONSOLE_OVERWRITE_ROUTINE is not set
 # CONFIG_SYS_CONSOLE_ENV_OVERWRITE is not set
 # CONFIG_SYS_CONSOLE_INFO_QUIET is not set
@@ -532,7 +532,6 @@ CONFIG_CMD_SOURCE=y
 #
 # Misc commands
 #
-# CONFIG_CMD_BMP is not set
 # CONFIG_CMD_BSP is not set
 # CONFIG_CMD_CACHE is not set
 # CONFIG_CMD_CONITRACE is not set
@@ -1074,16 +1073,14 @@ CONFIG_TWL4030_USB=y
 # CONFIG_VIDEO_VESA is not set
 # CONFIG_VIDEO_LCD_ANX9804 is not set
 # CONFIG_VIDEO_LCD_SSD2828 is not set
-# CONFIG_VIDEO_LCD_HITACHI_TX18D42VM is not set
 # CONFIG_VIDEO_MVEBU is not set
 # CONFIG_VIDEO_OMAP3 is not set
 # CONFIG_I2C_EDID is not set
 # CONFIG_DISPLAY is not set
 # CONFIG_ATMEL_HLCD is not set
 # CONFIG_AM335X_LCD is not set
-# CONFIG_VIDEO_FSL_DCU_FB is not set
 # CONFIG_VIDEO_BRIDGE is not set
-CONFIG_VIDEO=y
+# CONFIG_VIDEO is not set
 CONFIG_CFB_CONSOLE=y
 CONFIG_CFB_CONSOLE_ANSI=y
 # CONFIG_VGA_AS_SINGLE_DEVICE is not set


> diff --git a/drivers/video/Kconfig b/drivers/video/Kconfig
> index 2f3bb4b085..998271b9b6 100644
> --- a/drivers/video/Kconfig
> +++ b/drivers/video/Kconfig
> @@ -665,7 +665,7 @@ config VIDEO
>  
>  config CFB_CONSOLE
>  	bool "Enable colour frame buffer console"
> -	depends on VIDEO
> +	depends on VIDEO || ARCH_OMAP2PLUS
>  	default y if VIDEO
>  	help
>  	  Enables the colour frame buffer driver. This supports colour
> -- 
> 2.17.1
> 

[PATCH v2] nokia_rx51: disable obsolete VIDEO config

[Anatolij Gustschin]

On Tue, 27 Oct 2020 00:51:29 +0100
Pali Roh?r pali at kernel.org wrote:
...
> Hello! This change is disabling CONFIG_CONSOLE_MUX option.
> 
> Could you please do not disable it? It is needed for debugging via qemu:
> https://gitlab.denx.de/u-boot/u-boot/-/commit/07693ccb1574adecb9e87756339442955aeaf346

This was auto-selected by CONFIG_VIDEO, so now we have to enable it
explicitly. I'll send a patch.

--
Anatolij

[PATCH v2] nokia_rx51: disable obsolete VIDEO config

[Pali Rohár]

On Tuesday 27 October 2020 08:17:13 Anatolij Gustschin wrote:
> On Tue, 27 Oct 2020 00:51:29 +0100
> Pali Roh?r pali at kernel.org wrote:
> ...
> > Hello! This change is disabling CONFIG_CONSOLE_MUX option.
> > 
> > Could you please do not disable it? It is needed for debugging via qemu:
> > https://gitlab.denx.de/u-boot/u-boot/-/commit/07693ccb1574adecb9e87756339442955aeaf346
> 
> This was auto-selected by CONFIG_VIDEO, so now we have to enable it
> explicitly. I'll send a patch.

I have already did in above mentioned patch...

[PATCH v2] nokia_rx51: disable obsolete VIDEO config

[Anatolij Gustschin]

On Tue, 27 Oct 2020 09:42:50 +0100
Pali Roh?r pali at kernel.org wrote:
...
> > This was auto-selected by CONFIG_VIDEO, so now we have to enable it
> > explicitly. I'll send a patch.  
> 
> I have already did in above mentioned patch...

yes, but it was dropped in commit 585da32f4ced since it was auto-
selected with CONFIG_VIDEO defined.

--
Anatolij

[PATCH] picosam9g45: disable obsolete VIDEO config

[Anatolij Gustschin]

DM_VIDEO conversion deadline has passed, disable VIDEO config.

Signed-off-by: Anatolij Gustschin <agust@denx.de>
Cc: Erik van Luijk <evanluijk@interact.nl>
---
 configs/picosam9g45_defconfig | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/configs/picosam9g45_defconfig b/configs/picosam9g45_defconfig
index 5ffbee8e41..081c2a9b8e 100644
--- a/configs/picosam9g45_defconfig
+++ b/configs/picosam9g45_defconfig
@@ -44,7 +44,7 @@ CONFIG_ATMEL_USART=y
 CONFIG_USB=y
 CONFIG_USB_EHCI_HCD=y
 CONFIG_USB_STORAGE=y
-CONFIG_LCD=y
+# CONFIG_LCD is not set
 CONFIG_WDT=y
 CONFIG_WDT_AT91=y
 CONFIG_OF_LIBFDT=y
-- 
2.17.1

[PATCH] picosam9g45: disable obsolete VIDEO config

[Anatolij Gustschin]

On Sun, 18 Oct 2020 21:18:25 +0200
Anatolij Gustschin agust at denx.de wrote:

> DM_VIDEO conversion deadline has passed, disable VIDEO config.
> 
> Signed-off-by: Anatolij Gustschin <agust@denx.de>
> Cc: Erik van Luijk <evanluijk@interact.nl>
> ---
>  configs/picosam9g45_defconfig | 2 +-
>  1 file changed, 1 insertion(+), 1 deletion(-)

Applied to u-boot-video/master.

[PATCH] sansa_fuze_plus: disable obsolete VIDEO config

[Anatolij Gustschin]

DM_VIDEO conversion deadline has passed, disable VIDEO config.

Signed-off-by: Anatolij Gustschin <agust@denx.de>
Cc: Marek Vasut <marek.vasut@gmail.com>
---
 configs/sansa_fuze_plus_defconfig | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/configs/sansa_fuze_plus_defconfig b/configs/sansa_fuze_plus_defconfig
index 0c3296046f..7a41f990bf 100644
--- a/configs/sansa_fuze_plus_defconfig
+++ b/configs/sansa_fuze_plus_defconfig
@@ -44,5 +44,5 @@ CONFIG_USB_GADGET=y
 CONFIG_CI_UDC=y
 CONFIG_USB_ETHER=y
 CONFIG_USB_ETH_CDC=y
-CONFIG_VIDEO=y
+# CONFIG_VIDEO is not set
 CONFIG_OF_LIBFDT=y
-- 
2.17.1

[PATCH] sansa_fuze_plus: disable obsolete VIDEO config

[Anatolij Gustschin]

On Sun, 18 Oct 2020 21:18:26 +0200
Anatolij Gustschin agust at denx.de wrote:

> DM_VIDEO conversion deadline has passed, disable VIDEO config.
> 
> Signed-off-by: Anatolij Gustschin <agust@denx.de>
> Cc: Marek Vasut <marek.vasut@gmail.com>
> ---
>  configs/sansa_fuze_plus_defconfig | 2 +-
>  1 file changed, 1 insertion(+), 1 deletion(-)

Applied to u-boot-video/master.

[PATCH] xfi3: disable obsolete VIDEO config

[Anatolij Gustschin]

DM_VIDEO conversion deadline has passed, disable VIDEO config.

Signed-off-by: Anatolij Gustschin <agust@denx.de>
Cc: Marek Vasut <marek.vasut@gmail.com>
---
 configs/xfi3_defconfig | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/configs/xfi3_defconfig b/configs/xfi3_defconfig
index a943354903..9d895f87e6 100644
--- a/configs/xfi3_defconfig
+++ b/configs/xfi3_defconfig
@@ -41,5 +41,5 @@ CONFIG_USB_GADGET=y
 CONFIG_CI_UDC=y
 CONFIG_USB_ETHER=y
 CONFIG_USB_ETH_CDC=y
-CONFIG_VIDEO=y
+# CONFIG_VIDEO is not set
 CONFIG_OF_LIBFDT=y
-- 
2.17.1

[PATCH] xfi3: disable obsolete VIDEO config

[Anatolij Gustschin]

On Sun, 18 Oct 2020 21:18:27 +0200
Anatolij Gustschin agust at denx.de wrote:

> DM_VIDEO conversion deadline has passed, disable VIDEO config.
> 
> Signed-off-by: Anatolij Gustschin <agust@denx.de>
> Cc: Marek Vasut <marek.vasut@gmail.com>
> ---
>  configs/xfi3_defconfig | 2 +-
>  1 file changed, 1 insertion(+), 1 deletion(-)

Applied to u-boot-video/master.

[PATCH] arm: sunxi: disable obsolete VIDEO config

[Maxime Ripard]

On Sun, Oct 18, 2020 at 09:18:15PM +0200, Anatolij Gustschin wrote:
> DM_VIDEO conversion deadline has passed, disable VIDEO config
> option by default. Boards should convert to DM_VIDEO if they
> need video console support.
> 
> Signed-off-by: Anatolij Gustschin <agust@denx.de>
> Cc: Jagan Teki <jagan@amarulasolutions.com>
> Cc: Maxime Ripard <mripard@kernel.org>
> ---
>  arch/arm/mach-sunxi/Kconfig | 2 +-
>  1 file changed, 1 insertion(+), 1 deletion(-)
> 
> diff --git a/arch/arm/mach-sunxi/Kconfig b/arch/arm/mach-sunxi/Kconfig
> index be0822bfb7..f672bb8b4e 100644
> --- a/arch/arm/mach-sunxi/Kconfig
> +++ b/arch/arm/mach-sunxi/Kconfig
> @@ -760,7 +760,7 @@ config VIDEO_SUNXI
>  	depends on !MACH_SUN50I_H6
>  	select VIDEO
>  	imply VIDEO_DT_SIMPLEFB
> -	default y
> +	default n

default n is the default with Kconfig iirc

Otherwise, I can't say that I agree with the forced conversion strategy
to the DM in general. We're struggling to keep U-Boot working from one
release to the other, so adding pressure to convert drivers feels a bit
too much.

I can see where you're coming from though, so I guess that's a
reluctantly-acked-by ? :)

Maxime
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 228 bytes
Desc: not available
URL: <https://lists.denx.de/pipermail/u-boot/attachments/20201019/438fe163/attachment.sig>

[PATCH] arm: sunxi: disable obsolete VIDEO config

[Tom Rini]

On Mon, Oct 19, 2020 at 11:17:54AM +0200, Maxime Ripard wrote:
> On Sun, Oct 18, 2020 at 09:18:15PM +0200, Anatolij Gustschin wrote:
> > DM_VIDEO conversion deadline has passed, disable VIDEO config
> > option by default. Boards should convert to DM_VIDEO if they
> > need video console support.
> > 
> > Signed-off-by: Anatolij Gustschin <agust@denx.de>
> > Cc: Jagan Teki <jagan@amarulasolutions.com>
> > Cc: Maxime Ripard <mripard@kernel.org>
> > ---
> >  arch/arm/mach-sunxi/Kconfig | 2 +-
> >  1 file changed, 1 insertion(+), 1 deletion(-)
> > 
> > diff --git a/arch/arm/mach-sunxi/Kconfig b/arch/arm/mach-sunxi/Kconfig
> > index be0822bfb7..f672bb8b4e 100644
> > --- a/arch/arm/mach-sunxi/Kconfig
> > +++ b/arch/arm/mach-sunxi/Kconfig
> > @@ -760,7 +760,7 @@ config VIDEO_SUNXI
> >  	depends on !MACH_SUN50I_H6
> >  	select VIDEO
> >  	imply VIDEO_DT_SIMPLEFB
> > -	default y
> > +	default n
> 
> default n is the default with Kconfig iirc
> 
> Otherwise, I can't say that I agree with the forced conversion strategy
> to the DM in general. We're struggling to keep U-Boot working from one
> release to the other, so adding pressure to convert drivers feels a bit
> too much.
> 
> I can see where you're coming from though, so I guess that's a
> reluctantly-acked-by ? :)

Can you please elaborate on your struggles?  The only thing right now
keeping me from having some sunxi target in my HW CI loop is I didn't
have anything that wasn't leaking in power via UART, even, seemingly.
Thanks!

-- 
Tom
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 659 bytes
Desc: not available
URL: <https://lists.denx.de/pipermail/u-boot/attachments/20201019/bdeaa92f/attachment.sig>

[PATCH] arm: sunxi: disable obsolete VIDEO config

[Maxime Ripard]

On Mon, Oct 19, 2020 at 10:50:49AM -0400, Tom Rini wrote:
> On Mon, Oct 19, 2020 at 11:17:54AM +0200, Maxime Ripard wrote:
> > On Sun, Oct 18, 2020 at 09:18:15PM +0200, Anatolij Gustschin wrote:
> > > DM_VIDEO conversion deadline has passed, disable VIDEO config
> > > option by default. Boards should convert to DM_VIDEO if they
> > > need video console support.
> > > 
> > > Signed-off-by: Anatolij Gustschin <agust@denx.de>
> > > Cc: Jagan Teki <jagan@amarulasolutions.com>
> > > Cc: Maxime Ripard <mripard@kernel.org>
> > > ---
> > >  arch/arm/mach-sunxi/Kconfig | 2 +-
> > >  1 file changed, 1 insertion(+), 1 deletion(-)
> > > 
> > > diff --git a/arch/arm/mach-sunxi/Kconfig b/arch/arm/mach-sunxi/Kconfig
> > > index be0822bfb7..f672bb8b4e 100644
> > > --- a/arch/arm/mach-sunxi/Kconfig
> > > +++ b/arch/arm/mach-sunxi/Kconfig
> > > @@ -760,7 +760,7 @@ config VIDEO_SUNXI
> > >  	depends on !MACH_SUN50I_H6
> > >  	select VIDEO
> > >  	imply VIDEO_DT_SIMPLEFB
> > > -	default y
> > > +	default n
> > 
> > default n is the default with Kconfig iirc
> > 
> > Otherwise, I can't say that I agree with the forced conversion strategy
> > to the DM in general. We're struggling to keep U-Boot working from one
> > release to the other, so adding pressure to convert drivers feels a bit
> > too much.
> > 
> > I can see where you're coming from though, so I guess that's a
> > reluctantly-acked-by ? :)
> 
> Can you please elaborate on your struggles?

I'm sure that the fact that we don't have a lot of time is part of that
reason really, but it seems that the forced (or at least strongly
encouraged) conversion to Kconfig and the device model created a lot of
reworks that in turn created some regressions.

Even though they are to be expected in every patch, it looks to me that
the forced conversion encouraged people to create patches that were not
properly tested on every platform. So we ended up with more patches, and
a higher probability of breakage.

For example, I've recently discovered that since at least 2020.01 we
have a regression in our musb setup, where we used to be able to just
use a USB gadget right away, but it looks like now we have to use usb
reset. I haven't had the time to look into why yet.

Some boards also have lost ethernet for a while too because it turns out
that the generic PHY reset bindings aren't supported by the the
designware net driver and when we changed for those bindings, and then
sync'd the DTS between linux and u-boot, then the PHY wasn't reset
properly anymore (I do have a patch for that one though).

It feels like almost every release is broken in some new way, and it's
hard to just keep up.

Ultimately, I think that this is mostly due to us not having enough time
to test and debug each release. If someone with some knowledge of
Allwinner SoCs was willing to step up and take over my seat, then I'd be
more than happy to help with the transition.

> The only thing right now keeping me from having some sunxi target in
> my HW CI loop is I didn't have anything that wasn't leaking in power
> via UART, even, seemingly. Thanks!

Yeah, the older one especially are pretty bad for that. Which one do you
have?

Maxime
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 228 bytes
Desc: not available
URL: <https://lists.denx.de/pipermail/u-boot/attachments/20201027/99054b38/attachment.sig>

[PATCH] arm: sunxi: disable obsolete VIDEO config

[Jagan Teki]

On Mon, Oct 19, 2020 at 12:48 AM Anatolij Gustschin <agust@denx.de> wrote:
>
> DM_VIDEO conversion deadline has passed, disable VIDEO config
> option by default. Boards should convert to DM_VIDEO if they
> need video console support.
>
> Signed-off-by: Anatolij Gustschin <agust@denx.de>
> Cc: Jagan Teki <jagan@amarulasolutions.com>
> Cc: Maxime Ripard <mripard@kernel.org>
> ---
>  arch/arm/mach-sunxi/Kconfig | 2 +-
>  1 file changed, 1 insertion(+), 1 deletion(-)
>
> diff --git a/arch/arm/mach-sunxi/Kconfig b/arch/arm/mach-sunxi/Kconfig
> index be0822bfb7..f672bb8b4e 100644
> --- a/arch/arm/mach-sunxi/Kconfig
> +++ b/arch/arm/mach-sunxi/Kconfig
> @@ -760,7 +760,7 @@ config VIDEO_SUNXI
>         depends on !MACH_SUN50I_H6
>         select VIDEO
>         imply VIDEO_DT_SIMPLEFB
> -       default y
> +       default n

Any possibility to wait for the last RC? I have patched before[1] for
DM_VIDEO, now need some time to refine it.

https://patchwork.ozlabs.org/project/uboot/cover/20200617202437.301108-1-jagan at amarulasolutions.com/

Jagan.

[PATCH] arm: sunxi: disable obsolete VIDEO config

[Anatolij Gustschin]

On Thu, 22 Oct 2020 00:34:06 +0530
Jagan Teki jagan at amarulasolutions.com wrote:
...
> Any possibility to wait for the last RC? I have patched before[1] for
> DM_VIDEO, now need some time to refine it.

we can wait, it would be good to get it done in v2020.01.

--
Anatolij