* [PATCH 1/2] arm-bsp/layer.conf: add meta-python for musca
@ 2020-10-20 16:01 Ross Burton
2020-10-20 16:01 ` [PATCH 2/2] arm-bsp: fix typo in musca-b1 documentation Ross Burton
` (2 more replies)
0 siblings, 3 replies; 5+ messages in thread
From: Ross Burton @ 2020-10-20 16:01 UTC (permalink / raw)
To: meta-arm
Change-Id: I46568f3144519bc25a65bce3d29d0ae659335f55
Signed-off-by: Ross Burton <ross.burton@arm.com>
---
meta-arm-bsp/conf/layer.conf | 6 +++++-
1 file changed, 5 insertions(+), 1 deletion(-)
diff --git a/meta-arm-bsp/conf/layer.conf b/meta-arm-bsp/conf/layer.conf
index 816ff9d..eedb7e0 100644
--- a/meta-arm-bsp/conf/layer.conf
+++ b/meta-arm-bsp/conf/layer.conf
@@ -9,5 +9,9 @@ BBFILE_COLLECTIONS += "meta-arm-bsp"
BBFILE_PATTERN_meta-arm-bsp = "^${LAYERDIR}/"
BBFILE_PRIORITY_meta-arm-bsp = "6"
-LAYERDEPENDS_meta-arm-bsp = "core meta-arm meta-kernel"
LAYERSERIES_COMPAT_meta-arm-bsp = "dunfell gatesgarth"
+
+LAYERDEPENDS_meta-arm-bsp = "core meta-arm meta-kernel"
+# This won't be used by layerindex-fetch, but works everywhere else
+LAYERDEPENDS_meta-arm-bsp_append_musca-b1 = " meta-python"
+LAYERDEPENDS_meta-arm-bsp_append_musca-s1 = " meta-python"
--
2.25.1
^ permalink raw reply related [flat|nested] 5+ messages in thread* [PATCH 2/2] arm-bsp: fix typo in musca-b1 documentation
2020-10-20 16:01 [PATCH 1/2] arm-bsp/layer.conf: add meta-python for musca Ross Burton
@ 2020-10-20 16:01 ` Ross Burton
2020-10-20 17:07 ` [meta-arm] [PATCH 1/2] arm-bsp/layer.conf: add meta-python for musca Denys Dmytriyenko
2020-10-25 13:45 ` Jon Mason
2 siblings, 0 replies; 5+ messages in thread
From: Ross Burton @ 2020-10-20 16:01 UTC (permalink / raw)
To: meta-arm
Change-Id: I7e39c39f14a9ccf32ccfbc732f57c0df79034885
Signed-off-by: Ross Burton <ross.burton@arm.com>
---
meta-arm-bsp/documentation/musca-b1.md | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/meta-arm-bsp/documentation/musca-b1.md b/meta-arm-bsp/documentation/musca-b1.md
index 9fde10a..a9af03f 100644
--- a/meta-arm-bsp/documentation/musca-b1.md
+++ b/meta-arm-bsp/documentation/musca-b1.md
@@ -19,7 +19,7 @@ To build for Zephyr:
```bash$ bitbake zephyr-philosophers```
To build the trusted firmware-m (and not Zephyr):
-```bash$ bitbake trusted-frimware-m```
+```bash$ bitbake trusted-firmware-m```
## Running
To run Zephyr on the QEMU based machine, execute the following command
--
2.25.1
^ permalink raw reply related [flat|nested] 5+ messages in thread
* Re: [meta-arm] [PATCH 1/2] arm-bsp/layer.conf: add meta-python for musca
2020-10-20 16:01 [PATCH 1/2] arm-bsp/layer.conf: add meta-python for musca Ross Burton
2020-10-20 16:01 ` [PATCH 2/2] arm-bsp: fix typo in musca-b1 documentation Ross Burton
@ 2020-10-20 17:07 ` Denys Dmytriyenko
2020-10-20 20:49 ` Ross Burton
2020-10-25 13:45 ` Jon Mason
2 siblings, 1 reply; 5+ messages in thread
From: Denys Dmytriyenko @ 2020-10-20 17:07 UTC (permalink / raw)
To: Ross Burton; +Cc: meta-arm
On Tue, Oct 20, 2020 at 05:01:35PM +0100, Ross Burton wrote:
> Change-Id: I46568f3144519bc25a65bce3d29d0ae659335f55
> Signed-off-by: Ross Burton <ross.burton@arm.com>
> ---
> meta-arm-bsp/conf/layer.conf | 6 +++++-
> 1 file changed, 5 insertions(+), 1 deletion(-)
>
> diff --git a/meta-arm-bsp/conf/layer.conf b/meta-arm-bsp/conf/layer.conf
> index 816ff9d..eedb7e0 100644
> --- a/meta-arm-bsp/conf/layer.conf
> +++ b/meta-arm-bsp/conf/layer.conf
> @@ -9,5 +9,9 @@ BBFILE_COLLECTIONS += "meta-arm-bsp"
> BBFILE_PATTERN_meta-arm-bsp = "^${LAYERDIR}/"
> BBFILE_PRIORITY_meta-arm-bsp = "6"
>
> -LAYERDEPENDS_meta-arm-bsp = "core meta-arm meta-kernel"
> LAYERSERIES_COMPAT_meta-arm-bsp = "dunfell gatesgarth"
> +
> +LAYERDEPENDS_meta-arm-bsp = "core meta-arm meta-kernel"
> +# This won't be used by layerindex-fetch, but works everywhere else
> +LAYERDEPENDS_meta-arm-bsp_append_musca-b1 = " meta-python"
> +LAYERDEPENDS_meta-arm-bsp_append_musca-s1 = " meta-python"
LAYERDEPENDS changing based on the machine being built? Isn't it rather
backwards?
> --
> 2.25.1
>
>
>
>
^ permalink raw reply [flat|nested] 5+ messages in thread* Re: [meta-arm] [PATCH 1/2] arm-bsp/layer.conf: add meta-python for musca
2020-10-20 17:07 ` [meta-arm] [PATCH 1/2] arm-bsp/layer.conf: add meta-python for musca Denys Dmytriyenko
@ 2020-10-20 20:49 ` Ross Burton
0 siblings, 0 replies; 5+ messages in thread
From: Ross Burton @ 2020-10-20 20:49 UTC (permalink / raw)
To: Denys Dmytriyenko; +Cc: meta-arm
On Tue, 20 Oct 2020 at 18:07, Denys Dmytriyenko <denis@denix.org> wrote:
> LAYERDEPENDS changing based on the machine being built? Isn't it rather
> backwards?
Only a little. :). There's some meta-python dependencies that are only
relevant for the musca boards. The alternative are:
1) Don't add this dependency and get missing recipe errors when
building musca without meta-python. Bad.
2) Always depend on meta-python, although it's only needed for musca. Bad.
I consider this to be the least worst solution. It doesn't fetch
meta-python if you use layerindex-fetch, but you'll get a good error
message in that case if you build for musca.
Ross
^ permalink raw reply [flat|nested] 5+ messages in thread
* Re: [meta-arm] [PATCH 1/2] arm-bsp/layer.conf: add meta-python for musca
2020-10-20 16:01 [PATCH 1/2] arm-bsp/layer.conf: add meta-python for musca Ross Burton
2020-10-20 16:01 ` [PATCH 2/2] arm-bsp: fix typo in musca-b1 documentation Ross Burton
2020-10-20 17:07 ` [meta-arm] [PATCH 1/2] arm-bsp/layer.conf: add meta-python for musca Denys Dmytriyenko
@ 2020-10-25 13:45 ` Jon Mason
2 siblings, 0 replies; 5+ messages in thread
From: Jon Mason @ 2020-10-25 13:45 UTC (permalink / raw)
To: Ross Burton; +Cc: meta-arm
On Tue, Oct 20, 2020 at 05:01:35PM +0100, Ross Burton wrote:
> Change-Id: I46568f3144519bc25a65bce3d29d0ae659335f55
> Signed-off-by: Ross Burton <ross.burton@arm.com>
Series applied to master.
Thanks,
Jon
> ---
> meta-arm-bsp/conf/layer.conf | 6 +++++-
> 1 file changed, 5 insertions(+), 1 deletion(-)
>
> diff --git a/meta-arm-bsp/conf/layer.conf b/meta-arm-bsp/conf/layer.conf
> index 816ff9d..eedb7e0 100644
> --- a/meta-arm-bsp/conf/layer.conf
> +++ b/meta-arm-bsp/conf/layer.conf
> @@ -9,5 +9,9 @@ BBFILE_COLLECTIONS += "meta-arm-bsp"
> BBFILE_PATTERN_meta-arm-bsp = "^${LAYERDIR}/"
> BBFILE_PRIORITY_meta-arm-bsp = "6"
>
> -LAYERDEPENDS_meta-arm-bsp = "core meta-arm meta-kernel"
> LAYERSERIES_COMPAT_meta-arm-bsp = "dunfell gatesgarth"
> +
> +LAYERDEPENDS_meta-arm-bsp = "core meta-arm meta-kernel"
> +# This won't be used by layerindex-fetch, but works everywhere else
> +LAYERDEPENDS_meta-arm-bsp_append_musca-b1 = " meta-python"
> +LAYERDEPENDS_meta-arm-bsp_append_musca-s1 = " meta-python"
> --
> 2.25.1
>
>
>
>
^ permalink raw reply [flat|nested] 5+ messages in thread
end of thread, other threads:[~2020-10-25 13:45 UTC | newest]
Thread overview: 5+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2020-10-20 16:01 [PATCH 1/2] arm-bsp/layer.conf: add meta-python for musca Ross Burton
2020-10-20 16:01 ` [PATCH 2/2] arm-bsp: fix typo in musca-b1 documentation Ross Burton
2020-10-20 17:07 ` [meta-arm] [PATCH 1/2] arm-bsp/layer.conf: add meta-python for musca Denys Dmytriyenko
2020-10-20 20:49 ` Ross Burton
2020-10-25 13:45 ` Jon Mason
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.