From: Damien Le Moal <damien.lemoal@wdc.com>
To: Palmer Dabbelt <palmer@dabbelt.com>,
linux-riscv@lists.infradead.org, Rob Herring <robh+dt@kernel.org>,
Frank Rowand <frowand.list@gmail.com>,
devicetree@vger.kernel.org, Serge Semin <fancer.lancer@gmail.com>,
Mark Brown <broonie@kernel.org>,
linux-spi@vger.kernel.org, Stephen Boyd <sboyd@kernel.org>,
linux-clk@vger.kernel.org,
Linus Walleij <linus.walleij@linaro.org>,
linux-gpio@vger.kernel.org,
Philipp Zabel <p.zabel@pengutronix.de>
Cc: Sean Anderson <seanga2@gmail.com>
Subject: [PATCH 10/32] riscv: Fix sifive serial driver
Date: Sat, 7 Nov 2020 17:13:58 +0900 [thread overview]
Message-ID: <20201107081420.60325-11-damien.lemoal@wdc.com> (raw)
In-Reply-To: <20201107081420.60325-1-damien.lemoal@wdc.com>
Setup the port uartclk in sifive_serial_probe() so that the base baud
rate is correctly printed during device probe instead of always showing
"0". I.e. the probe message is changed from
38000000.serial: ttySIF0 at MMIO 0x38000000 (irq = 1,
base_baud = 0) is a SiFive UART v0
to the correct:
38000000.serial: ttySIF0 at MMIO 0x38000000 (irq = 1,
base_baud = 115200) is a SiFive UART v0
Signed-off-by: Damien Le Moal <damien.lemoal@wdc.com>
---
drivers/tty/serial/sifive.c | 1 +
1 file changed, 1 insertion(+)
diff --git a/drivers/tty/serial/sifive.c b/drivers/tty/serial/sifive.c
index 13eadcb8aec4..214bf3086c68 100644
--- a/drivers/tty/serial/sifive.c
+++ b/drivers/tty/serial/sifive.c
@@ -999,6 +999,7 @@ static int sifive_serial_probe(struct platform_device *pdev)
/* Set up clock divider */
ssp->clkin_rate = clk_get_rate(ssp->clk);
ssp->baud_rate = SIFIVE_DEFAULT_BAUD_RATE;
+ ssp->port.uartclk = ssp->baud_rate * 16;
__ssp_update_div(ssp);
platform_set_drvdata(pdev, ssp);
--
2.28.0
WARNING: multiple messages have this Message-ID (diff)
From: Damien Le Moal <damien.lemoal@wdc.com>
To: Palmer Dabbelt <palmer@dabbelt.com>,
linux-riscv@lists.infradead.org, Rob Herring <robh+dt@kernel.org>,
Frank Rowand <frowand.list@gmail.com>,
devicetree@vger.kernel.org, Serge Semin <fancer.lancer@gmail.com>,
Mark Brown <broonie@kernel.org>,
linux-spi@vger.kernel.org, Stephen Boyd <sboyd@kernel.org>,
linux-clk@vger.kernel.org,
Linus Walleij <linus.walleij@linaro.org>,
linux-gpio@vger.kernel.org,
Philipp Zabel <p.zabel@pengutronix.de>
Cc: Sean Anderson <seanga2@gmail.com>
Subject: [PATCH 10/32] riscv: Fix sifive serial driver
Date: Sat, 7 Nov 2020 17:13:58 +0900 [thread overview]
Message-ID: <20201107081420.60325-11-damien.lemoal@wdc.com> (raw)
In-Reply-To: <20201107081420.60325-1-damien.lemoal@wdc.com>
Setup the port uartclk in sifive_serial_probe() so that the base baud
rate is correctly printed during device probe instead of always showing
"0". I.e. the probe message is changed from
38000000.serial: ttySIF0 at MMIO 0x38000000 (irq = 1,
base_baud = 0) is a SiFive UART v0
to the correct:
38000000.serial: ttySIF0 at MMIO 0x38000000 (irq = 1,
base_baud = 115200) is a SiFive UART v0
Signed-off-by: Damien Le Moal <damien.lemoal@wdc.com>
---
drivers/tty/serial/sifive.c | 1 +
1 file changed, 1 insertion(+)
diff --git a/drivers/tty/serial/sifive.c b/drivers/tty/serial/sifive.c
index 13eadcb8aec4..214bf3086c68 100644
--- a/drivers/tty/serial/sifive.c
+++ b/drivers/tty/serial/sifive.c
@@ -999,6 +999,7 @@ static int sifive_serial_probe(struct platform_device *pdev)
/* Set up clock divider */
ssp->clkin_rate = clk_get_rate(ssp->clk);
ssp->baud_rate = SIFIVE_DEFAULT_BAUD_RATE;
+ ssp->port.uartclk = ssp->baud_rate * 16;
__ssp_update_div(ssp);
platform_set_drvdata(pdev, ssp);
--
2.28.0
_______________________________________________
linux-riscv mailing list
linux-riscv@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-riscv
next prev parent reply other threads:[~2020-11-07 8:14 UTC|newest]
Thread overview: 297+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-11-07 8:13 [PATCH 00/32] RISC-V Kendryte K210 support improvments Damien Le Moal
2020-11-07 8:13 ` Damien Le Moal
2020-11-07 8:13 ` [PATCH 01/32] of: Fix property supplier parsing Damien Le Moal
2020-11-07 8:13 ` Damien Le Moal
2020-11-09 15:05 ` Serge Semin
2020-11-09 15:05 ` Serge Semin
2020-11-09 15:14 ` Andy Shevchenko
2020-11-09 15:14 ` Andy Shevchenko
2020-11-09 17:44 ` Serge Semin
2020-11-09 17:44 ` Serge Semin
2020-11-09 20:52 ` Rob Herring
2020-11-09 20:52 ` Rob Herring
2020-11-16 7:30 ` Damien Le Moal
2020-11-16 7:30 ` Damien Le Moal
2020-11-16 22:06 ` Serge Semin
2020-11-16 22:06 ` Serge Semin
2020-11-07 8:13 ` [PATCH 02/32] spi: dw: Add support for 32-bits ctrlr0 layout Damien Le Moal
2020-11-07 8:13 ` Damien Le Moal
2020-11-07 13:28 ` Sean Anderson
2020-11-07 13:28 ` Sean Anderson
2020-11-09 14:25 ` Serge Semin
2020-11-09 14:25 ` Serge Semin
2020-11-09 14:33 ` Sean Anderson
2020-11-09 14:33 ` Sean Anderson
2020-11-09 14:35 ` Sean Anderson
2020-11-09 14:35 ` Sean Anderson
2020-11-09 14:40 ` Andy Shevchenko
2020-11-09 14:40 ` Andy Shevchenko
2020-11-09 14:41 ` Andy Shevchenko
2020-11-09 14:41 ` Andy Shevchenko
2020-11-09 14:49 ` Sean Anderson
2020-11-09 14:49 ` Sean Anderson
2020-11-09 15:10 ` Andy Shevchenko
2020-11-09 15:10 ` Andy Shevchenko
2020-11-09 14:36 ` Andy Shevchenko
2020-11-09 14:36 ` Andy Shevchenko
2020-11-09 17:56 ` Serge Semin
2020-11-09 17:56 ` Serge Semin
2020-11-07 8:13 ` [PATCH 03/32] spi: dw: Fix driving MOSI low while recieving Damien Le Moal
2020-11-07 8:13 ` Damien Le Moal
2020-11-07 13:30 ` Sean Anderson
2020-11-07 13:30 ` Sean Anderson
2020-11-09 13:29 ` Mark Brown
2020-11-09 13:29 ` Mark Brown
2020-11-09 13:47 ` Sean Anderson
2020-11-09 13:47 ` Sean Anderson
2020-11-09 14:14 ` Mark Brown
2020-11-09 14:14 ` Mark Brown
2020-11-09 14:48 ` Serge Semin
2020-11-09 14:48 ` Serge Semin
2020-11-09 16:45 ` Mark Brown
2020-11-09 16:45 ` Mark Brown
2020-11-09 19:19 ` Serge Semin
2020-11-09 19:19 ` Serge Semin
2020-11-09 19:40 ` Sean Anderson
2020-11-09 19:40 ` Sean Anderson
2020-11-09 20:17 ` Serge Semin
2020-11-09 20:17 ` Serge Semin
2020-11-09 20:29 ` Mark Brown
2020-11-09 20:29 ` Mark Brown
2020-11-09 20:20 ` Mark Brown
2020-11-09 20:20 ` Mark Brown
2020-11-09 21:05 ` Serge Semin
2020-11-09 21:05 ` Serge Semin
2020-11-10 13:43 ` Mark Brown
2020-11-10 13:43 ` Mark Brown
2020-11-07 8:13 ` [PATCH 04/32] spi: dw: Introduce polling device tree property Damien Le Moal
2020-11-07 8:13 ` Damien Le Moal
2020-11-09 16:04 ` Mark Brown
2020-11-09 16:04 ` Mark Brown
2020-11-09 19:59 ` Serge Semin
2020-11-09 19:59 ` Serge Semin
2020-11-13 9:22 ` Damien Le Moal
2020-11-13 9:22 ` Damien Le Moal
2020-11-15 16:01 ` Serge Semin
2020-11-15 16:01 ` Serge Semin
2020-11-16 7:47 ` Damien Le Moal
2020-11-16 7:47 ` Damien Le Moal
2020-11-16 12:33 ` Mark Brown
2020-11-16 12:33 ` Mark Brown
2020-11-16 21:55 ` Serge Semin
2020-11-16 21:55 ` Serge Semin
2020-11-17 14:44 ` Damien Le Moal
2020-11-17 14:44 ` Damien Le Moal
2020-11-17 18:26 ` Serge Semin
2020-11-17 18:26 ` Serge Semin
2020-11-18 4:41 ` Damien Le Moal
2020-11-18 4:41 ` Damien Le Moal
2020-11-18 15:16 ` Serge Semin
2020-11-18 15:16 ` Serge Semin
2020-11-19 5:12 ` Damien Le Moal
2020-11-19 5:12 ` Damien Le Moal
2020-11-19 8:51 ` Serge Semin
2020-11-19 8:51 ` Serge Semin
2020-11-19 8:57 ` Damien Le Moal
2020-11-19 8:57 ` Damien Le Moal
2020-11-07 8:13 ` [PATCH 05/32] spi: dw: Introduce DW_SPI_CAP_POLL_NODELAY Damien Le Moal
2020-11-07 8:13 ` Damien Le Moal
2020-11-09 14:03 ` Mark Brown
2020-11-09 14:03 ` Mark Brown
2020-11-09 20:45 ` Serge Semin
2020-11-09 20:45 ` Serge Semin
2020-11-07 8:13 ` [PATCH 06/32] spi: dw: Add support for the Kendryte K210 SoC Damien Le Moal
2020-11-07 8:13 ` Damien Le Moal
2020-11-07 13:31 ` Sean Anderson
2020-11-07 13:31 ` Sean Anderson
2020-11-07 13:42 ` Damien Le Moal
2020-11-07 13:42 ` Damien Le Moal
2020-11-07 13:52 ` Sean Anderson
2020-11-07 13:52 ` Sean Anderson
2020-11-09 14:15 ` Mark Brown
2020-11-09 14:15 ` Mark Brown
2020-11-13 8:00 ` Damien Le Moal
2020-11-13 8:00 ` Damien Le Moal
2020-11-09 21:21 ` Serge Semin
2020-11-09 21:21 ` Serge Semin
2020-11-09 21:39 ` Damien Le Moal
2020-11-09 21:39 ` Damien Le Moal
2020-11-09 21:55 ` Rob Herring
2020-11-09 21:55 ` Rob Herring
2020-11-09 22:00 ` Damien Le Moal
2020-11-09 22:00 ` Damien Le Moal
2020-11-09 23:07 ` Rob Herring
2020-11-09 23:07 ` Rob Herring
2020-11-10 0:35 ` Damien Le Moal
2020-11-10 0:35 ` Damien Le Moal
2020-11-07 8:13 ` [PATCH 07/32] dt-bindings: Update DW SPI device tree bindings Damien Le Moal
2020-11-07 8:13 ` Damien Le Moal
2020-11-07 8:13 ` [PATCH 08/32] riscv: Fix kernel time_init() Damien Le Moal
2020-11-07 8:13 ` Damien Le Moal
2020-11-12 7:21 ` Atish Patra
2020-11-12 7:21 ` Atish Patra
2020-11-13 7:31 ` Stephen Boyd
2020-11-13 7:31 ` Stephen Boyd
2020-11-13 7:40 ` Damien Le Moal
2020-11-13 7:40 ` Damien Le Moal
2020-11-13 7:53 ` Stephen Boyd
2020-11-13 7:53 ` Stephen Boyd
2020-11-13 7:57 ` Damien Le Moal
2020-11-13 7:57 ` Damien Le Moal
2020-11-13 8:11 ` Stephen Boyd
2020-11-13 8:11 ` Stephen Boyd
2020-11-13 8:23 ` Damien Le Moal
2020-11-13 8:23 ` Damien Le Moal
2020-11-16 7:06 ` Stephen Boyd
2020-11-16 7:06 ` Stephen Boyd
2020-11-16 7:18 ` Damien Le Moal
2020-11-16 7:18 ` Damien Le Moal
2020-11-07 8:13 ` [PATCH 09/32] riscv: Fix SiFive gpio probe Damien Le Moal
2020-11-07 8:13 ` Damien Le Moal
2020-11-10 14:39 ` Linus Walleij
2020-11-10 14:39 ` Linus Walleij
2020-11-11 7:00 ` Damien Le Moal
2020-11-11 7:00 ` Damien Le Moal
2020-11-11 8:54 ` Linus Walleij
2020-11-11 8:54 ` Linus Walleij
2020-11-11 8:56 ` Damien Le Moal
2020-11-11 8:56 ` Damien Le Moal
2020-11-07 8:13 ` Damien Le Moal [this message]
2020-11-07 8:13 ` [PATCH 10/32] riscv: Fix sifive serial driver Damien Le Moal
2020-11-07 8:13 ` [PATCH 11/32] riscv: Enable interrupts during syscalls with M-Mode Damien Le Moal
2020-11-07 8:13 ` Damien Le Moal
2020-11-07 8:14 ` [PATCH 12/32] riscv: Automatically select sysctl config options Damien Le Moal
2020-11-07 8:14 ` Damien Le Moal
2020-11-07 8:14 ` [PATCH 13/32] riscv: Fix builtin DTB handling Damien Le Moal
2020-11-07 8:14 ` Damien Le Moal
2020-11-15 4:17 ` kernel test robot
2020-11-15 4:17 ` kernel test robot
2020-11-15 4:17 ` kernel test robot
2020-11-07 8:14 ` [PATCH 14/32] dt-bindings: Define all Kendryte K210 clock IDs Damien Le Moal
2020-11-07 8:14 ` Damien Le Moal
2020-11-07 13:33 ` Sean Anderson
2020-11-07 13:33 ` Sean Anderson
2020-11-07 8:14 ` [PATCH 15/32] dt-bindings: Define Kendryte K210 sysctl registers Damien Le Moal
2020-11-07 8:14 ` Damien Le Moal
2020-11-07 13:34 ` Sean Anderson
2020-11-07 13:34 ` Sean Anderson
2020-11-09 21:59 ` Rob Herring
2020-11-09 21:59 ` Rob Herring
2020-11-09 22:10 ` Sean Anderson
2020-11-09 22:10 ` Sean Anderson
2020-11-09 23:01 ` Rob Herring
2020-11-09 23:01 ` Rob Herring
2020-11-07 8:14 ` [PATCH 16/32] dt-bindings: Define Kendryte K210 pin functions Damien Le Moal
2020-11-07 8:14 ` Damien Le Moal
2020-11-07 13:38 ` Sean Anderson
2020-11-07 13:38 ` Sean Anderson
2020-11-07 8:14 ` [PATCH 17/32] dt-bindings: Define Kendryte K210 reset signals Damien Le Moal
2020-11-07 8:14 ` Damien Le Moal
2020-11-07 13:38 ` Sean Anderson
2020-11-07 13:38 ` Sean Anderson
2020-11-07 8:14 ` [PATCH 18/32] riscv: Add Kendryte K210 SoC clock driver Damien Le Moal
2020-11-07 8:14 ` Damien Le Moal
2020-11-07 13:48 ` Sean Anderson
2020-11-07 13:48 ` Sean Anderson
2020-11-13 8:14 ` Damien Le Moal
2020-11-13 8:14 ` Damien Le Moal
2020-11-07 8:14 ` [PATCH 19/32] riscv: Add Kendryte K210 SoC reset controller Damien Le Moal
2020-11-07 8:14 ` Damien Le Moal
2020-11-07 13:58 ` Sean Anderson
2020-11-07 13:58 ` Sean Anderson
2020-11-07 8:14 ` [PATCH 20/32] riscv: Add Kendryte K210 FPIOA pinctrl driver Damien Le Moal
2020-11-07 8:14 ` Damien Le Moal
2020-11-09 18:48 ` kernel test robot
2020-11-09 18:48 ` kernel test robot
2020-11-09 18:48 ` kernel test robot
2020-11-15 0:28 ` kernel test robot
2020-11-15 0:28 ` kernel test robot
2020-11-15 0:28 ` kernel test robot
2020-11-24 8:43 ` Linus Walleij
2020-11-24 8:43 ` Linus Walleij
2020-11-24 8:53 ` Damien Le Moal
2020-11-24 8:53 ` Damien Le Moal
2020-11-29 21:33 ` Linus Walleij
2020-11-29 21:33 ` Linus Walleij
2020-11-30 3:13 ` Damien Le Moal
2020-11-30 3:13 ` Damien Le Moal
2020-11-30 7:05 ` Serge Semin
2020-11-30 7:05 ` Serge Semin
2020-11-30 7:27 ` Damien Le Moal
2020-11-30 7:27 ` Damien Le Moal
2020-11-24 8:56 ` Damien Le Moal
2020-11-24 8:56 ` Damien Le Moal
2020-11-07 8:14 ` [PATCH 21/32] dt-bindings: Add Kendryte and Canaan vendor prefix Damien Le Moal
2020-11-07 8:14 ` Damien Le Moal
2020-11-07 14:03 ` Sean Anderson
2020-11-07 14:03 ` Sean Anderson
2020-11-13 8:17 ` Damien Le Moal
2020-11-13 8:17 ` Damien Le Moal
2020-11-09 22:01 ` Rob Herring
2020-11-09 22:01 ` Rob Herring
2020-11-09 22:04 ` Damien Le Moal
2020-11-09 22:04 ` Damien Le Moal
2020-11-07 8:14 ` [PATCH 22/32] dt-binding: Document kendryte,k210-sysctl bindings Damien Le Moal
2020-11-07 8:14 ` Damien Le Moal
2020-11-07 14:05 ` Sean Anderson
2020-11-07 14:05 ` Sean Anderson
2020-11-09 15:32 ` Rob Herring
2020-11-09 15:32 ` Rob Herring
2020-11-07 8:14 ` [PATCH 23/32] dt-binding: Document kendryte,k210-clk bindings Damien Le Moal
2020-11-07 8:14 ` Damien Le Moal
2020-11-07 14:05 ` Sean Anderson
2020-11-07 14:05 ` Sean Anderson
2020-11-09 21:58 ` Rob Herring
2020-11-09 21:58 ` Rob Herring
2020-11-07 8:14 ` [PATCH 24/32] dt-bindings: Document kendryte,k210-fpioa bindings Damien Le Moal
2020-11-07 8:14 ` Damien Le Moal
2020-11-07 14:06 ` Sean Anderson
2020-11-07 14:06 ` Sean Anderson
2020-11-09 15:32 ` Rob Herring
2020-11-09 15:32 ` Rob Herring
2020-11-09 15:36 ` Rob Herring
2020-11-09 15:36 ` Rob Herring
2020-11-09 15:45 ` Sean Anderson
2020-11-09 15:45 ` Sean Anderson
2020-11-11 14:32 ` Rob Herring
2020-11-11 14:32 ` Rob Herring
2020-11-11 15:06 ` Damien Le Moal
2020-11-11 15:06 ` Damien Le Moal
2020-11-12 11:03 ` Damien Le Moal
2020-11-12 11:03 ` Damien Le Moal
2020-11-19 10:57 ` Geert Uytterhoeven
2020-11-19 10:57 ` Geert Uytterhoeven
2020-11-19 11:22 ` Damien Le Moal
2020-11-19 11:22 ` Damien Le Moal
2020-11-07 8:14 ` [PATCH 25/32] dt-bindings: Document kendryte,k210-rst bindings Damien Le Moal
2020-11-07 8:14 ` Damien Le Moal
2020-11-07 14:07 ` Sean Anderson
2020-11-07 14:07 ` Sean Anderson
2020-11-09 15:37 ` Rob Herring
2020-11-09 15:37 ` Rob Herring
2020-11-09 15:41 ` Rob Herring
2020-11-09 15:41 ` Rob Herring
2020-11-07 8:14 ` [PATCH 26/32] riscv: Update Kendryte K210 device tree Damien Le Moal
2020-11-07 8:14 ` Damien Le Moal
2020-11-07 14:08 ` Sean Anderson
2020-11-07 14:08 ` Sean Anderson
2020-11-07 8:14 ` [PATCH 27/32] riscv: Add SiPeed MAIX BiT board " Damien Le Moal
2020-11-07 8:14 ` Damien Le Moal
2020-11-07 14:13 ` Sean Anderson
2020-11-07 14:13 ` Sean Anderson
2020-11-07 8:14 ` [PATCH 28/32] riscv: Add SiPeed MAIX DOCK " Damien Le Moal
2020-11-07 8:14 ` Damien Le Moal
2020-11-07 8:14 ` [PATCH 29/32] riscv: Add SiPeed MAIX GO " Damien Le Moal
2020-11-07 8:14 ` Damien Le Moal
2020-11-07 8:14 ` [PATCH 30/32] riscv: Add SiPeed MAIXDUINO " Damien Le Moal
2020-11-07 8:14 ` Damien Le Moal
2020-11-07 14:14 ` Sean Anderson
2020-11-07 14:14 ` Sean Anderson
2020-11-07 8:14 ` [PATCH 31/32] riscv: Add Kendryte KD233 " Damien Le Moal
2020-11-07 8:14 ` Damien Le Moal
2020-11-07 8:14 ` [PATCH 32/32] riscv: Update Kendryte K210 defconfig Damien Le Moal
2020-11-07 8:14 ` Damien Le Moal
2020-11-09 12:51 ` [PATCH 00/32] RISC-V Kendryte K210 support improvments Mark Brown
2020-11-09 12:51 ` Mark Brown
2020-11-09 12:55 ` Damien Le Moal
2020-11-09 12:55 ` Damien Le Moal
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20201107081420.60325-11-damien.lemoal@wdc.com \
--to=damien.lemoal@wdc.com \
--cc=broonie@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=fancer.lancer@gmail.com \
--cc=frowand.list@gmail.com \
--cc=linus.walleij@linaro.org \
--cc=linux-clk@vger.kernel.org \
--cc=linux-gpio@vger.kernel.org \
--cc=linux-riscv@lists.infradead.org \
--cc=linux-spi@vger.kernel.org \
--cc=p.zabel@pengutronix.de \
--cc=palmer@dabbelt.com \
--cc=robh+dt@kernel.org \
--cc=sboyd@kernel.org \
--cc=seanga2@gmail.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.