* [PATCH v8 0/3] Use the generic PHY framework for Ingenic USB PHY.
@ 2020-11-07 9:47 周琰杰 (Zhou Yanjie)
2020-11-07 9:47 ` [PATCH v8 1/3] USB: PHY: JZ4770: Remove unnecessary function calls 周琰杰 (Zhou Yanjie)
` (2 more replies)
0 siblings, 3 replies; 5+ messages in thread
From: 周琰杰 (Zhou Yanjie) @ 2020-11-07 9:47 UTC (permalink / raw)
To: balbi, gregkh, kishon, vkoul, robh+dt
Cc: linux-kernel, devicetree, linux-usb, dongsheng.qiu, aric.pzqi,
rick.tyliu, yanfei.li, sernia.zhou, zhenwenjin, paul
v3->v4:
Only add new generic-PHY driver, without removing the old one. Because the
jz4740-musb driver is not ready to use the generic PHY framework. When the
jz4740-musb driver is modified to use the generic PHY framework, the old
jz4770-phy driver can be "retired".
v4->v5:
1.Add an extra blank line between "devm_of_phy_provider_register" and "return".
2.Remove unnecessary "phy_set_drvdata".
3.Add Paul Cercueil's Reviewed-by.
v5->v6:
1.Revert the removal of "phy_set_drvdata" in v5, removing "phy_set_drvdata" will
cause a kernel panic on CI20.
Reported-by: H. Nikolaus Schaller <hns@goldelico.com>
2.Rewrite the macro definitions, replace the original code with "FIELD_PREP()"
and "u32p_replace_bits()" according to Vinod Koul's suggestion.
v6->v7:
1.Remove the stray tab character.
2.Remove unnecessary "platform_set_drvdata".
3.Remove the "dev" field in priv structure, and use &phy->dev instead.
v7->v8:
Add support for Ingenic JZ4775 SoC and X2000 SoC.
周琰杰 (Zhou Yanjie) (3):
USB: PHY: JZ4770: Remove unnecessary function calls.
dt-bindings: USB: Add bindings for Ingenic JZ4775 and X2000.
PHY: Ingenic: Add USB PHY driver using generic PHY framework.
.../ingenic,phy-usb.yaml} | 4 +-
drivers/phy/Kconfig | 1 +
drivers/phy/Makefile | 1 +
drivers/phy/ingenic/Kconfig | 12 +
drivers/phy/ingenic/Makefile | 2 +
drivers/phy/ingenic/phy-ingenic-usb.c | 412 +++++++++++++++++++++
drivers/usb/phy/phy-jz4770.c | 2 +-
7 files changed, 432 insertions(+), 2 deletions(-)
rename Documentation/devicetree/bindings/{usb/ingenic,jz4770-phy.yaml => phy/ingenic,phy-usb.yaml} (89%)
create mode 100644 drivers/phy/ingenic/Kconfig
create mode 100644 drivers/phy/ingenic/Makefile
create mode 100644 drivers/phy/ingenic/phy-ingenic-usb.c
--
2.11.0
^ permalink raw reply [flat|nested] 5+ messages in thread
* [PATCH v8 1/3] USB: PHY: JZ4770: Remove unnecessary function calls.
2020-11-07 9:47 [PATCH v8 0/3] Use the generic PHY framework for Ingenic USB PHY 周琰杰 (Zhou Yanjie)
@ 2020-11-07 9:47 ` 周琰杰 (Zhou Yanjie)
2020-11-07 9:47 ` [PATCH v8 2/3] dt-bindings: USB: Add bindings for Ingenic JZ4775 and X2000 周琰杰 (Zhou Yanjie)
2020-11-07 9:47 ` [PATCH v8 3/3] PHY: Ingenic: Add USB PHY driver using generic PHY framework 周琰杰 (Zhou Yanjie)
2 siblings, 0 replies; 5+ messages in thread
From: 周琰杰 (Zhou Yanjie) @ 2020-11-07 9:47 UTC (permalink / raw)
To: balbi, gregkh, kishon, vkoul, robh+dt
Cc: linux-kernel, devicetree, linux-usb, dongsheng.qiu, aric.pzqi,
rick.tyliu, yanfei.li, sernia.zhou, zhenwenjin, paul
Remove unnecessary "of_match_ptr()", because Ingenic SoCs all
depend on Device Tree.
Suggested-by: Paul Cercueil <paul@crapouillou.net>
Signed-off-by: 周琰杰 (Zhou Yanjie) <zhouyanjie@wanyeetech.com>
Reviewed-by: Paul Cercueil <paul@crapouillou.net>
---
Notes:
v3:
New patch.
v3->v4:
No change.
v4->v5:
Add Paul Cercueil's Reviewed-by.
v5->v6:
No change.
v6->v7:
No change.
v7->v8:
No change.
drivers/usb/phy/phy-jz4770.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/usb/phy/phy-jz4770.c b/drivers/usb/phy/phy-jz4770.c
index f6d3731581eb..4025da20b3fd 100644
--- a/drivers/usb/phy/phy-jz4770.c
+++ b/drivers/usb/phy/phy-jz4770.c
@@ -350,7 +350,7 @@ static struct platform_driver ingenic_phy_driver = {
.probe = jz4770_phy_probe,
.driver = {
.name = "jz4770-phy",
- .of_match_table = of_match_ptr(ingenic_usb_phy_of_matches),
+ .of_match_table = ingenic_usb_phy_of_matches,
},
};
module_platform_driver(ingenic_phy_driver);
--
2.11.0
^ permalink raw reply related [flat|nested] 5+ messages in thread
* [PATCH v8 2/3] dt-bindings: USB: Add bindings for Ingenic JZ4775 and X2000.
2020-11-07 9:47 [PATCH v8 0/3] Use the generic PHY framework for Ingenic USB PHY 周琰杰 (Zhou Yanjie)
2020-11-07 9:47 ` [PATCH v8 1/3] USB: PHY: JZ4770: Remove unnecessary function calls 周琰杰 (Zhou Yanjie)
@ 2020-11-07 9:47 ` 周琰杰 (Zhou Yanjie)
2020-11-09 15:42 ` Rob Herring
2020-11-07 9:47 ` [PATCH v8 3/3] PHY: Ingenic: Add USB PHY driver using generic PHY framework 周琰杰 (Zhou Yanjie)
2 siblings, 1 reply; 5+ messages in thread
From: 周琰杰 (Zhou Yanjie) @ 2020-11-07 9:47 UTC (permalink / raw)
To: balbi, gregkh, kishon, vkoul, robh+dt
Cc: linux-kernel, devicetree, linux-usb, dongsheng.qiu, aric.pzqi,
rick.tyliu, yanfei.li, sernia.zhou, zhenwenjin, paul
Move Ingenic USB PHY bindings from Documentation/devicetree/bindings/usb
to Documentation/devicetree/bindings/phy, and add bindings for JZ4775 SoC
and X2000 SoC.
Signed-off-by: 周琰杰 (Zhou Yanjie) <zhouyanjie@wanyeetech.com>
---
Notes:
v8:
New patch.
.../{usb/ingenic,jz4770-phy.yaml => phy/ingenic,phy-usb.yaml} | 4 +++-
1 file changed, 3 insertions(+), 1 deletion(-)
rename Documentation/devicetree/bindings/{usb/ingenic,jz4770-phy.yaml => phy/ingenic,phy-usb.yaml} (89%)
diff --git a/Documentation/devicetree/bindings/usb/ingenic,jz4770-phy.yaml b/Documentation/devicetree/bindings/phy/ingenic,phy-usb.yaml
similarity index 89%
rename from Documentation/devicetree/bindings/usb/ingenic,jz4770-phy.yaml
rename to Documentation/devicetree/bindings/phy/ingenic,phy-usb.yaml
index 2d61166ea5cf..9f855984c535 100644
--- a/Documentation/devicetree/bindings/usb/ingenic,jz4770-phy.yaml
+++ b/Documentation/devicetree/bindings/phy/ingenic,phy-usb.yaml
@@ -1,7 +1,7 @@
# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
%YAML 1.2
---
-$id: http://devicetree.org/schemas/usb/ingenic,jz4770-phy.yaml#
+$id: http://devicetree.org/schemas/usb/ingenic,phy-usb.yaml#
$schema: http://devicetree.org/meta-schemas/core.yaml#
title: Ingenic SoCs USB PHY devicetree bindings
@@ -17,9 +17,11 @@ properties:
compatible:
enum:
- ingenic,jz4770-phy
+ - ingenic,jz4775-phy
- ingenic,jz4780-phy
- ingenic,x1000-phy
- ingenic,x1830-phy
+ - ingenic,x2000-phy
reg:
maxItems: 1
--
2.11.0
^ permalink raw reply related [flat|nested] 5+ messages in thread
* [PATCH v8 3/3] PHY: Ingenic: Add USB PHY driver using generic PHY framework.
2020-11-07 9:47 [PATCH v8 0/3] Use the generic PHY framework for Ingenic USB PHY 周琰杰 (Zhou Yanjie)
2020-11-07 9:47 ` [PATCH v8 1/3] USB: PHY: JZ4770: Remove unnecessary function calls 周琰杰 (Zhou Yanjie)
2020-11-07 9:47 ` [PATCH v8 2/3] dt-bindings: USB: Add bindings for Ingenic JZ4775 and X2000 周琰杰 (Zhou Yanjie)
@ 2020-11-07 9:47 ` 周琰杰 (Zhou Yanjie)
2 siblings, 0 replies; 5+ messages in thread
From: 周琰杰 (Zhou Yanjie) @ 2020-11-07 9:47 UTC (permalink / raw)
To: balbi, gregkh, kishon, vkoul, robh+dt
Cc: linux-kernel, devicetree, linux-usb, dongsheng.qiu, aric.pzqi,
rick.tyliu, yanfei.li, sernia.zhou, zhenwenjin, paul
Used the generic PHY framework API to create the PHY, this driver
supoorts USB OTG PHY used in JZ4770 SoC, JZ4775 SoC, JZ4780 SoC,
X1000 SoC, X1830 SoC and X2000 SoC.
Tested-by: 周正 (Zhou Zheng) <sernia.zhou@foxmail.com>
Tested-by: H. Nikolaus Schaller <hns@goldelico.com>
Co-developed-by: 漆鹏振 (Qi Pengzhen) <aric.pzqi@ingenic.com>
Signed-off-by: 漆鹏振 (Qi Pengzhen) <aric.pzqi@ingenic.com>
Signed-off-by: 周琰杰 (Zhou Yanjie) <zhouyanjie@wanyeetech.com>
Reviewed-by: Paul Cercueil <paul@crapouillou.net>
---
Notes:
v1->v2:
Fix bug, ".of_match_table = of_match_ptr(ingenic_usb_phy_of_matches)" is wrong
and should be replaced with ".of_match_table = ingenic_usb_phy_of_matches".
v2->v3:
1.Change "depends on (MACH_INGENIC && MIPS) || COMPILE_TEST" to
"depends on MIPS || COMPILE_TEST".
2.Keep the adjustments of "ingenic_usb_phy_init()" and "ingenic_usb_phu_exit()"
positions in v2 to make them consistent with the order in "ingenic_usb_phy_ops",
keep the adjustments to the positions of "ingenic_usb_phy_of_matches[]" in v2
to keep them consistent with the styles of other USB PHY drivers. And remove
some unnecessary changes to reduce the diff size, from the original 256 lines
change to the current 209 lines.
v3->v4:
Only add new generic-PHY driver, without removing the old one. Because the
jz4740-musb driver is not ready to use the generic PHY framework. When the
jz4740-musb driver is modified to use the generic PHY framework, the old
jz4770-phy driver can be "retired".
v4->v5:
1.Add an extra blank line between "devm_of_phy_provider_register" and "return".
2.Remove unnecessary "phy_set_drvdata".
3.Add Paul Cercueil's Reviewed-by.
v5->v6:
1.Revert the removal of "phy_set_drvdata" in v5, removing "phy_set_drvdata" will
cause a kernel panic on CI20.
Reported-by: H. Nikolaus Schaller <hns@goldelico.com>
2.Rewrite the macro definitions, replace the original code with "FIELD_PREP()"
and "u32p_replace_bits()" according to Vinod Koul's suggestion.
v6->v7:
1.Remove the stray tab character.
2.Remove unnecessary "platform_set_drvdata".
3.Remove the "dev" field in priv structure, and use &phy->dev instead.
v7->v8:
Add support for Ingenic JZ4775 SoC and X2000 SoC.
drivers/phy/Kconfig | 1 +
drivers/phy/Makefile | 1 +
drivers/phy/ingenic/Kconfig | 12 +
drivers/phy/ingenic/Makefile | 2 +
drivers/phy/ingenic/phy-ingenic-usb.c | 412 ++++++++++++++++++++++++++++++++++
5 files changed, 428 insertions(+)
create mode 100644 drivers/phy/ingenic/Kconfig
create mode 100644 drivers/phy/ingenic/Makefile
create mode 100644 drivers/phy/ingenic/phy-ingenic-usb.c
diff --git a/drivers/phy/Kconfig b/drivers/phy/Kconfig
index 01b53f86004c..00dabe5fab8a 100644
--- a/drivers/phy/Kconfig
+++ b/drivers/phy/Kconfig
@@ -66,6 +66,7 @@ source "drivers/phy/broadcom/Kconfig"
source "drivers/phy/cadence/Kconfig"
source "drivers/phy/freescale/Kconfig"
source "drivers/phy/hisilicon/Kconfig"
+source "drivers/phy/ingenic/Kconfig"
source "drivers/phy/lantiq/Kconfig"
source "drivers/phy/marvell/Kconfig"
source "drivers/phy/mediatek/Kconfig"
diff --git a/drivers/phy/Makefile b/drivers/phy/Makefile
index 6eb2916773c5..32261e164abd 100644
--- a/drivers/phy/Makefile
+++ b/drivers/phy/Makefile
@@ -15,6 +15,7 @@ obj-y += allwinner/ \
cadence/ \
freescale/ \
hisilicon/ \
+ ingenic/ \
intel/ \
lantiq/ \
marvell/ \
diff --git a/drivers/phy/ingenic/Kconfig b/drivers/phy/ingenic/Kconfig
new file mode 100644
index 000000000000..912b14e512cb
--- /dev/null
+++ b/drivers/phy/ingenic/Kconfig
@@ -0,0 +1,12 @@
+# SPDX-License-Identifier: GPL-2.0
+#
+# Phy drivers for Ingenic platforms
+#
+config PHY_INGENIC_USB
+ tristate "Ingenic SoCs USB PHY Driver"
+ depends on MIPS || COMPILE_TEST
+ depends on USB_SUPPORT
+ select GENERIC_PHY
+ help
+ This driver provides USB PHY support for the USB controller found
+ on the JZ-series and X-series SoCs from Ingenic.
diff --git a/drivers/phy/ingenic/Makefile b/drivers/phy/ingenic/Makefile
new file mode 100644
index 000000000000..65d5ea00fc9d
--- /dev/null
+++ b/drivers/phy/ingenic/Makefile
@@ -0,0 +1,2 @@
+# SPDX-License-Identifier: GPL-2.0
+obj-y += phy-ingenic-usb.o
diff --git a/drivers/phy/ingenic/phy-ingenic-usb.c b/drivers/phy/ingenic/phy-ingenic-usb.c
new file mode 100644
index 000000000000..4d1587d82286
--- /dev/null
+++ b/drivers/phy/ingenic/phy-ingenic-usb.c
@@ -0,0 +1,412 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Ingenic SoCs USB PHY driver
+ * Copyright (c) Paul Cercueil <paul@crapouillou.net>
+ * Copyright (c) 漆鹏振 (Qi Pengzhen) <aric.pzqi@ingenic.com>
+ * Copyright (c) 周琰杰 (Zhou Yanjie) <zhouyanjie@wanyeetech.com>
+ */
+
+#include <linux/bitfield.h>
+#include <linux/clk.h>
+#include <linux/delay.h>
+#include <linux/io.h>
+#include <linux/module.h>
+#include <linux/phy/phy.h>
+#include <linux/platform_device.h>
+#include <linux/regulator/consumer.h>
+
+/* OTGPHY register offsets */
+#define REG_USBPCR_OFFSET 0x00
+#define REG_USBRDT_OFFSET 0x04
+#define REG_USBVBFIL_OFFSET 0x08
+#define REG_USBPCR1_OFFSET 0x0c
+
+/* bits within the USBPCR register */
+#define USBPCR_USB_MODE BIT(31)
+#define USBPCR_AVLD_REG BIT(30)
+#define USBPCR_COMMONONN BIT(25)
+#define USBPCR_VBUSVLDEXT BIT(24)
+#define USBPCR_VBUSVLDEXTSEL BIT(23)
+#define USBPCR_POR BIT(22)
+#define USBPCR_SIDDQ BIT(21)
+#define USBPCR_OTG_DISABLE BIT(20)
+#define USBPCR_TXPREEMPHTUNE BIT(6)
+
+#define USBPCR_IDPULLUP_MASK GENMASK(29, 28)
+#define USBPCR_IDPULLUP_ALWAYS 0x2
+#define USBPCR_IDPULLUP_SUSPEND 0x1
+#define USBPCR_IDPULLUP_OTG 0x0
+
+#define USBPCR_COMPDISTUNE_MASK GENMASK(19, 17)
+#define USBPCR_COMPDISTUNE_DFT 0x4
+
+#define USBPCR_OTGTUNE_MASK GENMASK(16, 14)
+#define USBPCR_OTGTUNE_DFT 0x4
+
+#define USBPCR_SQRXTUNE_MASK GENMASK(13, 11)
+#define USBPCR_SQRXTUNE_DCR_20PCT 0x7
+#define USBPCR_SQRXTUNE_DFT 0x3
+
+#define USBPCR_TXFSLSTUNE_MASK GENMASK(10, 7)
+#define USBPCR_TXFSLSTUNE_DCR_50PPT 0xf
+#define USBPCR_TXFSLSTUNE_DCR_25PPT 0x7
+#define USBPCR_TXFSLSTUNE_DFT 0x3
+#define USBPCR_TXFSLSTUNE_INC_25PPT 0x1
+#define USBPCR_TXFSLSTUNE_INC_50PPT 0x0
+
+#define USBPCR_TXHSXVTUNE_MASK GENMASK(5, 4)
+#define USBPCR_TXHSXVTUNE_DFT 0x3
+#define USBPCR_TXHSXVTUNE_DCR_15MV 0x1
+
+#define USBPCR_TXRISETUNE_MASK GENMASK(5, 4)
+#define USBPCR_TXRISETUNE_DFT 0x3
+
+#define USBPCR_TXVREFTUNE_MASK GENMASK(3, 0)
+#define USBPCR_TXVREFTUNE_INC_75PPT 0xb
+#define USBPCR_TXVREFTUNE_INC_25PPT 0x7
+#define USBPCR_TXVREFTUNE_DFT 0x5
+
+/* bits within the USBRDTR register */
+#define USBRDT_UTMI_RST BIT(27)
+#define USBRDT_HB_MASK BIT(26)
+#define USBRDT_VBFIL_LD_EN BIT(25)
+#define USBRDT_IDDIG_EN BIT(24)
+#define USBRDT_IDDIG_REG BIT(23)
+#define USBRDT_VBFIL_EN BIT(2)
+
+/* bits within the USBPCR1 register */
+#define USBPCR1_BVLD_REG BIT(31)
+#define USBPCR1_DPPD BIT(29)
+#define USBPCR1_DMPD BIT(28)
+#define USBPCR1_USB_SEL BIT(28)
+#define USBPCR1_PORT_RST BIT(21)
+#define USBPCR1_WORD_IF_16BIT BIT(19)
+
+enum ingenic_usb_phy_version {
+ ID_JZ4770,
+ ID_JZ4775,
+ ID_JZ4780,
+ ID_X1000,
+ ID_X1830,
+ ID_X2000,
+};
+
+struct ingenic_soc_info {
+ enum ingenic_usb_phy_version version;
+
+ void (*usb_phy_init)(struct phy *phy);
+};
+
+struct ingenic_usb_phy {
+ const struct ingenic_soc_info *soc_info;
+
+ struct phy *phy;
+ void __iomem *base;
+ struct clk *clk;
+ struct regulator *vcc_supply;
+};
+
+static int ingenic_usb_phy_init(struct phy *phy)
+{
+ struct ingenic_usb_phy *priv = phy_get_drvdata(phy);
+ int err;
+ u32 reg;
+
+ err = clk_prepare_enable(priv->clk);
+ if (err) {
+ dev_err(&phy->dev, "Unable to start clock: %d\n", err);
+ return err;
+ }
+
+ priv->soc_info->usb_phy_init(phy);
+
+ /* Wait for PHY to reset */
+ usleep_range(30, 300);
+ reg = readl(priv->base + REG_USBPCR_OFFSET);
+ writel(reg & ~USBPCR_POR, priv->base + REG_USBPCR_OFFSET);
+ usleep_range(300, 1000);
+
+ return 0;
+}
+
+static int ingenic_usb_phy_exit(struct phy *phy)
+{
+ struct ingenic_usb_phy *priv = phy_get_drvdata(phy);
+
+ clk_disable_unprepare(priv->clk);
+ regulator_disable(priv->vcc_supply);
+
+ return 0;
+}
+
+static int ingenic_usb_phy_power_on(struct phy *phy)
+{
+ struct ingenic_usb_phy *priv = phy_get_drvdata(phy);
+ int err;
+
+ err = regulator_enable(priv->vcc_supply);
+ if (err) {
+ dev_err(&phy->dev, "Unable to enable VCC: %d\n", err);
+ return err;
+ }
+
+ return 0;
+}
+
+static int ingenic_usb_phy_power_off(struct phy *phy)
+{
+ struct ingenic_usb_phy *priv = phy_get_drvdata(phy);
+
+ regulator_disable(priv->vcc_supply);
+
+ return 0;
+}
+
+static int ingenic_usb_phy_set_mode(struct phy *phy,
+ enum phy_mode mode, int submode)
+{
+ struct ingenic_usb_phy *priv = phy_get_drvdata(phy);
+ u32 reg;
+
+ switch (mode) {
+ case PHY_MODE_USB_HOST:
+ reg = readl(priv->base + REG_USBPCR_OFFSET);
+ u32p_replace_bits(®, 1, USBPCR_USB_MODE);
+ u32p_replace_bits(®, 0, USBPCR_VBUSVLDEXT);
+ u32p_replace_bits(®, 0, USBPCR_VBUSVLDEXTSEL);
+ u32p_replace_bits(®, 0, USBPCR_OTG_DISABLE);
+ writel(reg, priv->base + REG_USBPCR_OFFSET);
+
+ break;
+ case PHY_MODE_USB_DEVICE:
+ reg = readl(priv->base + REG_USBPCR_OFFSET);
+ u32p_replace_bits(®, 0, USBPCR_USB_MODE);
+ u32p_replace_bits(®, 1, USBPCR_VBUSVLDEXT);
+ u32p_replace_bits(®, 1, USBPCR_VBUSVLDEXTSEL);
+ u32p_replace_bits(®, 1, USBPCR_OTG_DISABLE);
+ writel(reg, priv->base + REG_USBPCR_OFFSET);
+
+ break;
+ case PHY_MODE_USB_OTG:
+ reg = readl(priv->base + REG_USBPCR_OFFSET);
+ u32p_replace_bits(®, 1, USBPCR_USB_MODE);
+ u32p_replace_bits(®, 1, USBPCR_VBUSVLDEXT);
+ u32p_replace_bits(®, 1, USBPCR_VBUSVLDEXTSEL);
+ u32p_replace_bits(®, 0, USBPCR_OTG_DISABLE);
+ writel(reg, priv->base + REG_USBPCR_OFFSET);
+
+ break;
+ default:
+ return -EINVAL;
+ }
+
+ return 0;
+}
+
+static const struct phy_ops ingenic_usb_phy_ops = {
+ .init = ingenic_usb_phy_init,
+ .exit = ingenic_usb_phy_exit,
+ .power_on = ingenic_usb_phy_power_on,
+ .power_off = ingenic_usb_phy_power_off,
+ .set_mode = ingenic_usb_phy_set_mode,
+ .owner = THIS_MODULE,
+};
+
+static void jz4770_usb_phy_init(struct phy *phy)
+{
+ struct ingenic_usb_phy *priv = phy_get_drvdata(phy);
+ u32 reg;
+
+ reg = USBPCR_AVLD_REG | USBPCR_COMMONONN | USBPCR_POR |
+ FIELD_PREP(USBPCR_IDPULLUP_MASK, USBPCR_IDPULLUP_ALWAYS) |
+ FIELD_PREP(USBPCR_COMPDISTUNE_MASK, USBPCR_COMPDISTUNE_DFT) |
+ FIELD_PREP(USBPCR_OTGTUNE_MASK, USBPCR_OTGTUNE_DFT) |
+ FIELD_PREP(USBPCR_SQRXTUNE_MASK, USBPCR_SQRXTUNE_DFT) |
+ FIELD_PREP(USBPCR_TXFSLSTUNE_MASK, USBPCR_TXFSLSTUNE_DFT) |
+ FIELD_PREP(USBPCR_TXRISETUNE_MASK, USBPCR_TXRISETUNE_DFT) |
+ FIELD_PREP(USBPCR_TXVREFTUNE_MASK, USBPCR_TXVREFTUNE_DFT);
+ writel(reg, priv->base + REG_USBPCR_OFFSET);
+}
+
+static void jz4775_usb_phy_init(struct phy *phy)
+{
+ struct ingenic_usb_phy *priv = phy_get_drvdata(phy);
+ u32 reg;
+
+ reg = readl(priv->base + REG_USBPCR1_OFFSET) | USBPCR1_USB_SEL |
+ USBPCR1_WORD_IF_16BIT;
+ writel(reg, priv->base + REG_USBPCR1_OFFSET);
+
+ reg = USBPCR_COMMONONN | USBPCR_POR |
+ FIELD_PREP(USBPCR_TXVREFTUNE_MASK, USBPCR_TXVREFTUNE_INC_75PPT);
+ writel(reg, priv->base + REG_USBPCR_OFFSET);
+}
+
+static void jz4780_usb_phy_init(struct phy *phy)
+{
+ struct ingenic_usb_phy *priv = phy_get_drvdata(phy);
+ u32 reg;
+
+ reg = readl(priv->base + REG_USBPCR1_OFFSET) | USBPCR1_USB_SEL |
+ USBPCR1_WORD_IF_16BIT;
+ writel(reg, priv->base + REG_USBPCR1_OFFSET);
+
+ reg = USBPCR_TXPREEMPHTUNE | USBPCR_COMMONONN | USBPCR_POR;
+ writel(reg, priv->base + REG_USBPCR_OFFSET);
+}
+
+static void x1000_usb_phy_init(struct phy *phy)
+{
+ struct ingenic_usb_phy *priv = phy_get_drvdata(phy);
+ u32 reg;
+
+ reg = readl(priv->base + REG_USBPCR1_OFFSET) | USBPCR1_WORD_IF_16BIT;
+ writel(reg, priv->base + REG_USBPCR1_OFFSET);
+
+ reg = USBPCR_TXPREEMPHTUNE | USBPCR_COMMONONN | USBPCR_POR |
+ FIELD_PREP(USBPCR_SQRXTUNE_MASK, USBPCR_SQRXTUNE_DCR_20PCT) |
+ FIELD_PREP(USBPCR_TXHSXVTUNE_MASK, USBPCR_TXHSXVTUNE_DCR_15MV) |
+ FIELD_PREP(USBPCR_TXVREFTUNE_MASK, USBPCR_TXVREFTUNE_INC_25PPT);
+ writel(reg, priv->base + REG_USBPCR_OFFSET);
+}
+
+static void x1830_usb_phy_init(struct phy *phy)
+{
+ struct ingenic_usb_phy *priv = phy_get_drvdata(phy);
+ u32 reg;
+
+ /* rdt */
+ writel(USBRDT_VBFIL_EN | USBRDT_UTMI_RST, priv->base + REG_USBRDT_OFFSET);
+
+ reg = readl(priv->base + REG_USBPCR1_OFFSET) | USBPCR1_WORD_IF_16BIT |
+ USBPCR1_DMPD | USBPCR1_DPPD;
+ writel(reg, priv->base + REG_USBPCR1_OFFSET);
+
+ reg = USBPCR_VBUSVLDEXT | USBPCR_TXPREEMPHTUNE | USBPCR_COMMONONN | USBPCR_POR |
+ FIELD_PREP(USBPCR_IDPULLUP_MASK, USBPCR_IDPULLUP_OTG);
+ writel(reg, priv->base + REG_USBPCR_OFFSET);
+}
+
+static void x2000_usb_phy_init(struct phy *phy)
+{
+ struct ingenic_usb_phy *priv = phy_get_drvdata(phy);
+ u32 reg;
+
+ reg = readl(priv->base + REG_USBPCR1_OFFSET) | USBPCR1_DPPD | USBPCR1_DMPD;
+ writel(reg & ~USBPCR1_PORT_RST, priv->base + REG_USBPCR1_OFFSET);
+
+ reg = USBPCR_POR | FIELD_PREP(USBPCR_IDPULLUP_MASK, USBPCR_IDPULLUP_OTG);
+ writel(reg, priv->base + REG_USBPCR_OFFSET);
+}
+
+static const struct ingenic_soc_info jz4770_soc_info = {
+ .version = ID_JZ4770,
+
+ .usb_phy_init = jz4770_usb_phy_init,
+};
+
+static const struct ingenic_soc_info jz4775_soc_info = {
+ .version = ID_JZ4775,
+
+ .usb_phy_init = jz4775_usb_phy_init,
+};
+
+static const struct ingenic_soc_info jz4780_soc_info = {
+ .version = ID_JZ4780,
+
+ .usb_phy_init = jz4780_usb_phy_init,
+};
+
+static const struct ingenic_soc_info x1000_soc_info = {
+ .version = ID_X1000,
+
+ .usb_phy_init = x1000_usb_phy_init,
+};
+
+static const struct ingenic_soc_info x1830_soc_info = {
+ .version = ID_X1830,
+
+ .usb_phy_init = x1830_usb_phy_init,
+};
+
+static const struct ingenic_soc_info x2000_soc_info = {
+ .version = ID_X2000,
+
+ .usb_phy_init = x2000_usb_phy_init,
+};
+
+static int ingenic_usb_phy_probe(struct platform_device *pdev)
+{
+ struct ingenic_usb_phy *priv;
+ struct phy_provider *provider;
+ struct device *dev = &pdev->dev;
+ int err;
+
+ priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL);
+ if (!priv)
+ return -ENOMEM;
+
+ priv->soc_info = device_get_match_data(dev);
+ if (!priv->soc_info) {
+ dev_err(dev, "Error: No device match found\n");
+ return -ENODEV;
+ }
+
+ priv->base = devm_platform_ioremap_resource(pdev, 0);
+ if (IS_ERR(priv->base)) {
+ dev_err(dev, "Failed to map registers\n");
+ return PTR_ERR(priv->base);
+ }
+
+ priv->clk = devm_clk_get(dev, NULL);
+ if (IS_ERR(priv->clk)) {
+ err = PTR_ERR(priv->clk);
+ if (err != -EPROBE_DEFER)
+ dev_err(dev, "Failed to get clock\n");
+ return err;
+ }
+
+ priv->vcc_supply = devm_regulator_get(dev, "vcc");
+ if (IS_ERR(priv->vcc_supply)) {
+ err = PTR_ERR(priv->vcc_supply);
+ if (err != -EPROBE_DEFER)
+ dev_err(dev, "Failed to get regulator\n");
+ return err;
+ }
+
+ priv->phy = devm_phy_create(dev, NULL, &ingenic_usb_phy_ops);
+ if (IS_ERR(priv))
+ return PTR_ERR(priv);
+
+ phy_set_drvdata(priv->phy, priv);
+
+ provider = devm_of_phy_provider_register(dev, of_phy_simple_xlate);
+
+ return PTR_ERR_OR_ZERO(provider);
+}
+
+static const struct of_device_id ingenic_usb_phy_of_matches[] = {
+ { .compatible = "ingenic,jz4770-phy", .data = &jz4770_soc_info },
+ { .compatible = "ingenic,jz4775-phy", .data = &jz4775_soc_info },
+ { .compatible = "ingenic,jz4780-phy", .data = &jz4780_soc_info },
+ { .compatible = "ingenic,x1000-phy", .data = &x1000_soc_info },
+ { .compatible = "ingenic,x1830-phy", .data = &x1830_soc_info },
+ { .compatible = "ingenic,x2000-phy", .data = &x2000_soc_info },
+ { /* sentinel */ }
+};
+MODULE_DEVICE_TABLE(of, ingenic_usb_phy_of_matches);
+
+static struct platform_driver ingenic_usb_phy_driver = {
+ .probe = ingenic_usb_phy_probe,
+ .driver = {
+ .name = "ingenic-usb-phy",
+ .of_match_table = ingenic_usb_phy_of_matches,
+ },
+};
+module_platform_driver(ingenic_usb_phy_driver);
+
+MODULE_AUTHOR("周琰杰 (Zhou Yanjie) <zhouyanjie@wanyeetech.com>");
+MODULE_AUTHOR("漆鹏振 (Qi Pengzhen) <aric.pzqi@ingenic.com>");
+MODULE_AUTHOR("Paul Cercueil <paul@crapouillou.net>");
+MODULE_DESCRIPTION("Ingenic SoCs USB PHY driver");
+MODULE_LICENSE("GPL");
--
2.11.0
^ permalink raw reply related [flat|nested] 5+ messages in thread
* Re: [PATCH v8 2/3] dt-bindings: USB: Add bindings for Ingenic JZ4775 and X2000.
2020-11-07 9:47 ` [PATCH v8 2/3] dt-bindings: USB: Add bindings for Ingenic JZ4775 and X2000 周琰杰 (Zhou Yanjie)
@ 2020-11-09 15:42 ` Rob Herring
0 siblings, 0 replies; 5+ messages in thread
From: Rob Herring @ 2020-11-09 15:42 UTC (permalink / raw)
To: 周琰杰 (Zhou Yanjie)
Cc: kishon, vkoul, dongsheng.qiu, linux-usb, paul, linux-kernel,
gregkh, robh+dt, rick.tyliu, balbi, sernia.zhou, zhenwenjin,
devicetree, aric.pzqi, yanfei.li
On Sat, 07 Nov 2020 17:47:57 +0800, 周琰杰 (Zhou Yanjie) wrote:
> Move Ingenic USB PHY bindings from Documentation/devicetree/bindings/usb
> to Documentation/devicetree/bindings/phy, and add bindings for JZ4775 SoC
> and X2000 SoC.
>
> Signed-off-by: 周琰杰 (Zhou Yanjie) <zhouyanjie@wanyeetech.com>
> ---
>
> Notes:
> v8:
> New patch.
>
> .../{usb/ingenic,jz4770-phy.yaml => phy/ingenic,phy-usb.yaml} | 4 +++-
> 1 file changed, 3 insertions(+), 1 deletion(-)
> rename Documentation/devicetree/bindings/{usb/ingenic,jz4770-phy.yaml => phy/ingenic,phy-usb.yaml} (89%)
>
My bot found errors running 'make dt_binding_check' on your patch:
yamllint warnings/errors:
dtschema/dtc warnings/errors:
Unknown file referenced: [Errno 2] No such file or directory: '/usr/local/lib/python3.8/dist-packages/dtschema/schemas/usb/ingenic,jz4770-phy.yaml'
xargs: dt-doc-validate: exited with status 255; aborting
make[1]: *** [Documentation/devicetree/bindings/Makefile:59: Documentation/devicetree/bindings/processed-schema-examples.json] Error 124
make: *** [Makefile:1364: dt_binding_check] Error 2
./Documentation/devicetree/bindings/phy/ingenic,phy-usb.yaml: $id: relative path/filename doesn't match actual path or filename
expected: http://devicetree.org/schemas/phy/ingenic,phy-usb.yaml#
See https://patchwork.ozlabs.org/patch/1396098
The base for the patch is generally the last rc1. Any dependencies
should be noted.
If you already ran 'make dt_binding_check' and didn't see the above
error(s), then make sure 'yamllint' is installed and dt-schema is up to
date:
pip3 install dtschema --upgrade
Please check and re-submit.
^ permalink raw reply [flat|nested] 5+ messages in thread
end of thread, other threads:[~2020-11-09 15:42 UTC | newest]
Thread overview: 5+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2020-11-07 9:47 [PATCH v8 0/3] Use the generic PHY framework for Ingenic USB PHY 周琰杰 (Zhou Yanjie)
2020-11-07 9:47 ` [PATCH v8 1/3] USB: PHY: JZ4770: Remove unnecessary function calls 周琰杰 (Zhou Yanjie)
2020-11-07 9:47 ` [PATCH v8 2/3] dt-bindings: USB: Add bindings for Ingenic JZ4775 and X2000 周琰杰 (Zhou Yanjie)
2020-11-09 15:42 ` Rob Herring
2020-11-07 9:47 ` [PATCH v8 3/3] PHY: Ingenic: Add USB PHY driver using generic PHY framework 周琰杰 (Zhou Yanjie)
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.