* [PATCH RESEND 0/3] Allow on demand channel request / free
@ 2020-11-11 11:11 ` Daniel Baluta
0 siblings, 0 replies; 10+ messages in thread
From: Daniel Baluta @ 2020-11-11 11:11 UTC (permalink / raw)
To: shawnguo
Cc: s.hauer, linux-kernel, paul.olaru, linux-imx, kernel, festevam,
shengjiu.wang, linux-arm-kernel
Requesting an mailbox channel will call mailbox's startup
function.
startup function calls pm_runtime_get_sync which increments device usage
count and will keep the device active. Specifically, mailbox clock will
be always ON when a mailbox channel is requested.
For this, reason we introduce a way to request/free IMX DSP channels
on demand to save power when the channels are not used.
First two patches are doing code refactoring preparing the path
for 3rd patch which exports functions for on demand channel request/free
Daniel Baluta (3):
firmware: imx: Introduce imx_dsp_setup_channels
firmware: imx: Save channel name for further use
firmware: imx-dsp: Export functions to request/free channels
drivers/firmware/imx/imx-dsp.c | 72 ++++++++++++++++++++++++--------
include/linux/firmware/imx/dsp.h | 10 +++++
2 files changed, 64 insertions(+), 18 deletions(-)
--
2.17.1
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply [flat|nested] 10+ messages in thread
* [PATCH RESEND 1/3] firmware: imx: Introduce imx_dsp_setup_channels
2020-11-11 11:11 ` Daniel Baluta
@ 2020-11-11 11:11 ` Daniel Baluta
-1 siblings, 0 replies; 10+ messages in thread
From: Daniel Baluta @ 2020-11-11 11:11 UTC (permalink / raw)
To: shawnguo
Cc: s.hauer, kernel, festevam, linux-imx, linux-arm-kernel,
linux-kernel, paul.olaru, shengjiu.wang
Create a separate function that sets up DSP mailbox channels
so that imx_dsp_probe function will be easier to read.
Signed-off-by: Daniel Baluta <daniel.baluta@nxp.com>
---
drivers/firmware/imx/imx-dsp.c | 41 +++++++++++++++++++++-------------
1 file changed, 26 insertions(+), 15 deletions(-)
diff --git a/drivers/firmware/imx/imx-dsp.c b/drivers/firmware/imx/imx-dsp.c
index 4265e9dbed84..a3a018c87b52 100644
--- a/drivers/firmware/imx/imx-dsp.c
+++ b/drivers/firmware/imx/imx-dsp.c
@@ -60,22 +60,15 @@ static void imx_dsp_handle_rx(struct mbox_client *c, void *msg)
}
}
-static int imx_dsp_probe(struct platform_device *pdev)
+static int imx_dsp_setup_channels(struct imx_dsp_ipc *dsp_ipc)
{
- struct device *dev = &pdev->dev;
- struct imx_dsp_ipc *dsp_ipc;
+ struct device *dev = dsp_ipc->dev;
struct imx_dsp_chan *dsp_chan;
struct mbox_client *cl;
char *chan_name;
int ret;
int i, j;
- device_set_of_node_from_dev(&pdev->dev, pdev->dev.parent);
-
- dsp_ipc = devm_kzalloc(dev, sizeof(*dsp_ipc), GFP_KERNEL);
- if (!dsp_ipc)
- return -ENOMEM;
-
for (i = 0; i < DSP_MU_CHAN_NUM; i++) {
if (i < 2)
chan_name = kasprintf(GFP_KERNEL, "txdb%d", i);
@@ -108,12 +101,6 @@ static int imx_dsp_probe(struct platform_device *pdev)
kfree(chan_name);
}
- dsp_ipc->dev = dev;
-
- dev_set_drvdata(dev, dsp_ipc);
-
- dev_info(dev, "NXP i.MX DSP IPC initialized\n");
-
return 0;
out:
kfree(chan_name);
@@ -125,6 +112,30 @@ static int imx_dsp_probe(struct platform_device *pdev)
return ret;
}
+static int imx_dsp_probe(struct platform_device *pdev)
+{
+ struct device *dev = &pdev->dev;
+ struct imx_dsp_ipc *dsp_ipc;
+ int ret;
+
+ device_set_of_node_from_dev(&pdev->dev, pdev->dev.parent);
+
+ dsp_ipc = devm_kzalloc(dev, sizeof(*dsp_ipc), GFP_KERNEL);
+ if (!dsp_ipc)
+ return -ENOMEM;
+
+ dsp_ipc->dev = dev;
+ dev_set_drvdata(dev, dsp_ipc);
+
+ ret = imx_dsp_setup_channels(dsp_ipc);
+ if (ret < 0)
+ return ret;
+
+ dev_info(dev, "NXP i.MX DSP IPC initialized\n");
+
+ return 0;
+}
+
static int imx_dsp_remove(struct platform_device *pdev)
{
struct imx_dsp_chan *dsp_chan;
--
2.17.1
^ permalink raw reply related [flat|nested] 10+ messages in thread* [PATCH RESEND 1/3] firmware: imx: Introduce imx_dsp_setup_channels
@ 2020-11-11 11:11 ` Daniel Baluta
0 siblings, 0 replies; 10+ messages in thread
From: Daniel Baluta @ 2020-11-11 11:11 UTC (permalink / raw)
To: shawnguo
Cc: s.hauer, linux-kernel, paul.olaru, linux-imx, kernel, festevam,
shengjiu.wang, linux-arm-kernel
Create a separate function that sets up DSP mailbox channels
so that imx_dsp_probe function will be easier to read.
Signed-off-by: Daniel Baluta <daniel.baluta@nxp.com>
---
drivers/firmware/imx/imx-dsp.c | 41 +++++++++++++++++++++-------------
1 file changed, 26 insertions(+), 15 deletions(-)
diff --git a/drivers/firmware/imx/imx-dsp.c b/drivers/firmware/imx/imx-dsp.c
index 4265e9dbed84..a3a018c87b52 100644
--- a/drivers/firmware/imx/imx-dsp.c
+++ b/drivers/firmware/imx/imx-dsp.c
@@ -60,22 +60,15 @@ static void imx_dsp_handle_rx(struct mbox_client *c, void *msg)
}
}
-static int imx_dsp_probe(struct platform_device *pdev)
+static int imx_dsp_setup_channels(struct imx_dsp_ipc *dsp_ipc)
{
- struct device *dev = &pdev->dev;
- struct imx_dsp_ipc *dsp_ipc;
+ struct device *dev = dsp_ipc->dev;
struct imx_dsp_chan *dsp_chan;
struct mbox_client *cl;
char *chan_name;
int ret;
int i, j;
- device_set_of_node_from_dev(&pdev->dev, pdev->dev.parent);
-
- dsp_ipc = devm_kzalloc(dev, sizeof(*dsp_ipc), GFP_KERNEL);
- if (!dsp_ipc)
- return -ENOMEM;
-
for (i = 0; i < DSP_MU_CHAN_NUM; i++) {
if (i < 2)
chan_name = kasprintf(GFP_KERNEL, "txdb%d", i);
@@ -108,12 +101,6 @@ static int imx_dsp_probe(struct platform_device *pdev)
kfree(chan_name);
}
- dsp_ipc->dev = dev;
-
- dev_set_drvdata(dev, dsp_ipc);
-
- dev_info(dev, "NXP i.MX DSP IPC initialized\n");
-
return 0;
out:
kfree(chan_name);
@@ -125,6 +112,30 @@ static int imx_dsp_probe(struct platform_device *pdev)
return ret;
}
+static int imx_dsp_probe(struct platform_device *pdev)
+{
+ struct device *dev = &pdev->dev;
+ struct imx_dsp_ipc *dsp_ipc;
+ int ret;
+
+ device_set_of_node_from_dev(&pdev->dev, pdev->dev.parent);
+
+ dsp_ipc = devm_kzalloc(dev, sizeof(*dsp_ipc), GFP_KERNEL);
+ if (!dsp_ipc)
+ return -ENOMEM;
+
+ dsp_ipc->dev = dev;
+ dev_set_drvdata(dev, dsp_ipc);
+
+ ret = imx_dsp_setup_channels(dsp_ipc);
+ if (ret < 0)
+ return ret;
+
+ dev_info(dev, "NXP i.MX DSP IPC initialized\n");
+
+ return 0;
+}
+
static int imx_dsp_remove(struct platform_device *pdev)
{
struct imx_dsp_chan *dsp_chan;
--
2.17.1
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply related [flat|nested] 10+ messages in thread
* [PATCH RESEND 2/3] firmware: imx: Save channel name for further use
2020-11-11 11:11 ` Daniel Baluta
@ 2020-11-11 11:11 ` Daniel Baluta
-1 siblings, 0 replies; 10+ messages in thread
From: Daniel Baluta @ 2020-11-11 11:11 UTC (permalink / raw)
To: shawnguo
Cc: s.hauer, kernel, festevam, linux-imx, linux-arm-kernel,
linux-kernel, paul.olaru, shengjiu.wang
We want to request / free channels on demand later in order
to save power.
For this for each channel we save the name and use it to
reference the channel later.
Signed-off-by: Daniel Baluta <daniel.baluta@nxp.com>
---
drivers/firmware/imx/imx-dsp.c | 6 +++---
1 file changed, 3 insertions(+), 3 deletions(-)
diff --git a/drivers/firmware/imx/imx-dsp.c b/drivers/firmware/imx/imx-dsp.c
index a3a018c87b52..b6e95d6d34c0 100644
--- a/drivers/firmware/imx/imx-dsp.c
+++ b/drivers/firmware/imx/imx-dsp.c
@@ -79,6 +79,7 @@ static int imx_dsp_setup_channels(struct imx_dsp_ipc *dsp_ipc)
return -ENOMEM;
dsp_chan = &dsp_ipc->chans[i];
+ dsp_chan->name = chan_name;
cl = &dsp_chan->cl;
cl->dev = dev;
cl->tx_block = false;
@@ -97,16 +98,14 @@ static int imx_dsp_setup_channels(struct imx_dsp_ipc *dsp_ipc)
}
dev_dbg(dev, "request mbox chan %s\n", chan_name);
- /* chan_name is not used anymore by framework */
- kfree(chan_name);
}
return 0;
out:
- kfree(chan_name);
for (j = 0; j < i; j++) {
dsp_chan = &dsp_ipc->chans[j];
mbox_free_channel(dsp_chan->ch);
+ kfree(dsp_chan->name);
}
return ret;
@@ -147,6 +146,7 @@ static int imx_dsp_remove(struct platform_device *pdev)
for (i = 0; i < DSP_MU_CHAN_NUM; i++) {
dsp_chan = &dsp_ipc->chans[i];
mbox_free_channel(dsp_chan->ch);
+ kfree(dsp_chan->name);
}
return 0;
--
2.17.1
^ permalink raw reply related [flat|nested] 10+ messages in thread* [PATCH RESEND 2/3] firmware: imx: Save channel name for further use
@ 2020-11-11 11:11 ` Daniel Baluta
0 siblings, 0 replies; 10+ messages in thread
From: Daniel Baluta @ 2020-11-11 11:11 UTC (permalink / raw)
To: shawnguo
Cc: s.hauer, linux-kernel, paul.olaru, linux-imx, kernel, festevam,
shengjiu.wang, linux-arm-kernel
We want to request / free channels on demand later in order
to save power.
For this for each channel we save the name and use it to
reference the channel later.
Signed-off-by: Daniel Baluta <daniel.baluta@nxp.com>
---
drivers/firmware/imx/imx-dsp.c | 6 +++---
1 file changed, 3 insertions(+), 3 deletions(-)
diff --git a/drivers/firmware/imx/imx-dsp.c b/drivers/firmware/imx/imx-dsp.c
index a3a018c87b52..b6e95d6d34c0 100644
--- a/drivers/firmware/imx/imx-dsp.c
+++ b/drivers/firmware/imx/imx-dsp.c
@@ -79,6 +79,7 @@ static int imx_dsp_setup_channels(struct imx_dsp_ipc *dsp_ipc)
return -ENOMEM;
dsp_chan = &dsp_ipc->chans[i];
+ dsp_chan->name = chan_name;
cl = &dsp_chan->cl;
cl->dev = dev;
cl->tx_block = false;
@@ -97,16 +98,14 @@ static int imx_dsp_setup_channels(struct imx_dsp_ipc *dsp_ipc)
}
dev_dbg(dev, "request mbox chan %s\n", chan_name);
- /* chan_name is not used anymore by framework */
- kfree(chan_name);
}
return 0;
out:
- kfree(chan_name);
for (j = 0; j < i; j++) {
dsp_chan = &dsp_ipc->chans[j];
mbox_free_channel(dsp_chan->ch);
+ kfree(dsp_chan->name);
}
return ret;
@@ -147,6 +146,7 @@ static int imx_dsp_remove(struct platform_device *pdev)
for (i = 0; i < DSP_MU_CHAN_NUM; i++) {
dsp_chan = &dsp_ipc->chans[i];
mbox_free_channel(dsp_chan->ch);
+ kfree(dsp_chan->name);
}
return 0;
--
2.17.1
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply related [flat|nested] 10+ messages in thread
* [PATCH RESEND 3/3] firmware: imx-dsp: Export functions to request/free channels
2020-11-11 11:11 ` Daniel Baluta
@ 2020-11-11 11:11 ` Daniel Baluta
-1 siblings, 0 replies; 10+ messages in thread
From: Daniel Baluta @ 2020-11-11 11:11 UTC (permalink / raw)
To: shawnguo
Cc: s.hauer, kernel, festevam, linux-imx, linux-arm-kernel,
linux-kernel, paul.olaru, shengjiu.wang
In order to save power, we only need to request a channel
when the communication with the DSP active.
For this we export the following functions:
- imx_dsp_request_channel, gets a channel with a given index
- imx_dsp_free_channel, frees a channel with a given index
Notice that we still request channels at probe to support devices
that do not have PM callbacks implemented.
More explanations about why requesting a channel has an effect
on power savings:
- requesting an mailbox channel will call mailbox's startup
function.
- startup function calls pm_runtime_get_sync which increments device
usage count and will keep the device active. Specifically, mailbox
clock will be always ON when a mailbox channel is requested.
Signed-off-by: Daniel Baluta <daniel.baluta@nxp.com>
---
drivers/firmware/imx/imx-dsp.c | 25 +++++++++++++++++++++++++
include/linux/firmware/imx/dsp.h | 10 ++++++++++
2 files changed, 35 insertions(+)
diff --git a/drivers/firmware/imx/imx-dsp.c b/drivers/firmware/imx/imx-dsp.c
index b6e95d6d34c0..a6c06d7476c3 100644
--- a/drivers/firmware/imx/imx-dsp.c
+++ b/drivers/firmware/imx/imx-dsp.c
@@ -60,6 +60,31 @@ static void imx_dsp_handle_rx(struct mbox_client *c, void *msg)
}
}
+struct mbox_chan *imx_dsp_request_channel(struct imx_dsp_ipc *dsp_ipc, int idx)
+{
+ struct imx_dsp_chan *dsp_chan;
+
+ if (idx >= DSP_MU_CHAN_NUM)
+ return ERR_PTR(-EINVAL);
+
+ dsp_chan = &dsp_ipc->chans[idx];
+ dsp_chan->ch = mbox_request_channel_byname(&dsp_chan->cl, dsp_chan->name);
+ return dsp_chan->ch;
+}
+EXPORT_SYMBOL(imx_dsp_request_channel);
+
+void imx_dsp_free_channel(struct imx_dsp_ipc *dsp_ipc, int idx)
+{
+ struct imx_dsp_chan *dsp_chan;
+
+ if (idx >= DSP_MU_CHAN_NUM)
+ return;
+
+ dsp_chan = &dsp_ipc->chans[idx];
+ mbox_free_channel(dsp_chan->ch);
+}
+EXPORT_SYMBOL(imx_dsp_free_channel);
+
static int imx_dsp_setup_channels(struct imx_dsp_ipc *dsp_ipc)
{
struct device *dev = dsp_ipc->dev;
diff --git a/include/linux/firmware/imx/dsp.h b/include/linux/firmware/imx/dsp.h
index 7562099c9e46..4f7895a3b73c 100644
--- a/include/linux/firmware/imx/dsp.h
+++ b/include/linux/firmware/imx/dsp.h
@@ -55,6 +55,9 @@ static inline void *imx_dsp_get_data(struct imx_dsp_ipc *ipc)
int imx_dsp_ring_doorbell(struct imx_dsp_ipc *dsp, unsigned int chan_idx);
+struct mbox_chan *imx_dsp_request_channel(struct imx_dsp_ipc *ipc, int idx);
+void imx_dsp_free_channel(struct imx_dsp_ipc *ipc, int idx);
+
#else
static inline int imx_dsp_ring_doorbell(struct imx_dsp_ipc *ipc,
@@ -63,5 +66,12 @@ static inline int imx_dsp_ring_doorbell(struct imx_dsp_ipc *ipc,
return -ENOTSUPP;
}
+struct mbox_chan *imx_dsp_request_channel(struct imx_dsp_ipc *ipc, int idx)
+{
+ return ERR_PTR(-EOPNOTSUPP);
+}
+
+void imx_dsp_free_channel(struct imx_dsp_ipc *ipc, int idx) { }
+
#endif
#endif /* _IMX_DSP_IPC_H */
--
2.17.1
^ permalink raw reply related [flat|nested] 10+ messages in thread* [PATCH RESEND 3/3] firmware: imx-dsp: Export functions to request/free channels
@ 2020-11-11 11:11 ` Daniel Baluta
0 siblings, 0 replies; 10+ messages in thread
From: Daniel Baluta @ 2020-11-11 11:11 UTC (permalink / raw)
To: shawnguo
Cc: s.hauer, linux-kernel, paul.olaru, linux-imx, kernel, festevam,
shengjiu.wang, linux-arm-kernel
In order to save power, we only need to request a channel
when the communication with the DSP active.
For this we export the following functions:
- imx_dsp_request_channel, gets a channel with a given index
- imx_dsp_free_channel, frees a channel with a given index
Notice that we still request channels at probe to support devices
that do not have PM callbacks implemented.
More explanations about why requesting a channel has an effect
on power savings:
- requesting an mailbox channel will call mailbox's startup
function.
- startup function calls pm_runtime_get_sync which increments device
usage count and will keep the device active. Specifically, mailbox
clock will be always ON when a mailbox channel is requested.
Signed-off-by: Daniel Baluta <daniel.baluta@nxp.com>
---
drivers/firmware/imx/imx-dsp.c | 25 +++++++++++++++++++++++++
include/linux/firmware/imx/dsp.h | 10 ++++++++++
2 files changed, 35 insertions(+)
diff --git a/drivers/firmware/imx/imx-dsp.c b/drivers/firmware/imx/imx-dsp.c
index b6e95d6d34c0..a6c06d7476c3 100644
--- a/drivers/firmware/imx/imx-dsp.c
+++ b/drivers/firmware/imx/imx-dsp.c
@@ -60,6 +60,31 @@ static void imx_dsp_handle_rx(struct mbox_client *c, void *msg)
}
}
+struct mbox_chan *imx_dsp_request_channel(struct imx_dsp_ipc *dsp_ipc, int idx)
+{
+ struct imx_dsp_chan *dsp_chan;
+
+ if (idx >= DSP_MU_CHAN_NUM)
+ return ERR_PTR(-EINVAL);
+
+ dsp_chan = &dsp_ipc->chans[idx];
+ dsp_chan->ch = mbox_request_channel_byname(&dsp_chan->cl, dsp_chan->name);
+ return dsp_chan->ch;
+}
+EXPORT_SYMBOL(imx_dsp_request_channel);
+
+void imx_dsp_free_channel(struct imx_dsp_ipc *dsp_ipc, int idx)
+{
+ struct imx_dsp_chan *dsp_chan;
+
+ if (idx >= DSP_MU_CHAN_NUM)
+ return;
+
+ dsp_chan = &dsp_ipc->chans[idx];
+ mbox_free_channel(dsp_chan->ch);
+}
+EXPORT_SYMBOL(imx_dsp_free_channel);
+
static int imx_dsp_setup_channels(struct imx_dsp_ipc *dsp_ipc)
{
struct device *dev = dsp_ipc->dev;
diff --git a/include/linux/firmware/imx/dsp.h b/include/linux/firmware/imx/dsp.h
index 7562099c9e46..4f7895a3b73c 100644
--- a/include/linux/firmware/imx/dsp.h
+++ b/include/linux/firmware/imx/dsp.h
@@ -55,6 +55,9 @@ static inline void *imx_dsp_get_data(struct imx_dsp_ipc *ipc)
int imx_dsp_ring_doorbell(struct imx_dsp_ipc *dsp, unsigned int chan_idx);
+struct mbox_chan *imx_dsp_request_channel(struct imx_dsp_ipc *ipc, int idx);
+void imx_dsp_free_channel(struct imx_dsp_ipc *ipc, int idx);
+
#else
static inline int imx_dsp_ring_doorbell(struct imx_dsp_ipc *ipc,
@@ -63,5 +66,12 @@ static inline int imx_dsp_ring_doorbell(struct imx_dsp_ipc *ipc,
return -ENOTSUPP;
}
+struct mbox_chan *imx_dsp_request_channel(struct imx_dsp_ipc *ipc, int idx)
+{
+ return ERR_PTR(-EOPNOTSUPP);
+}
+
+void imx_dsp_free_channel(struct imx_dsp_ipc *ipc, int idx) { }
+
#endif
#endif /* _IMX_DSP_IPC_H */
--
2.17.1
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply related [flat|nested] 10+ messages in thread
* Re: [PATCH RESEND 0/3] Allow on demand channel request / free
2020-11-11 11:11 ` Daniel Baluta
@ 2020-11-16 8:34 ` Shawn Guo
-1 siblings, 0 replies; 10+ messages in thread
From: Shawn Guo @ 2020-11-16 8:34 UTC (permalink / raw)
To: Daniel Baluta
Cc: s.hauer, kernel, festevam, linux-imx, linux-arm-kernel,
linux-kernel, paul.olaru, shengjiu.wang
On Wed, Nov 11, 2020 at 01:11:15PM +0200, Daniel Baluta wrote:
> Requesting an mailbox channel will call mailbox's startup
> function.
>
> startup function calls pm_runtime_get_sync which increments device usage
> count and will keep the device active. Specifically, mailbox clock will
> be always ON when a mailbox channel is requested.
>
> For this, reason we introduce a way to request/free IMX DSP channels
> on demand to save power when the channels are not used.
>
> First two patches are doing code refactoring preparing the path
> for 3rd patch which exports functions for on demand channel request/free
>
>
> Daniel Baluta (3):
> firmware: imx: Introduce imx_dsp_setup_channels
> firmware: imx: Save channel name for further use
> firmware: imx-dsp: Export functions to request/free channels
Applied all, thanks.
^ permalink raw reply [flat|nested] 10+ messages in thread
* Re: [PATCH RESEND 0/3] Allow on demand channel request / free
@ 2020-11-16 8:34 ` Shawn Guo
0 siblings, 0 replies; 10+ messages in thread
From: Shawn Guo @ 2020-11-16 8:34 UTC (permalink / raw)
To: Daniel Baluta
Cc: s.hauer, linux-kernel, paul.olaru, linux-imx, kernel, festevam,
shengjiu.wang, linux-arm-kernel
On Wed, Nov 11, 2020 at 01:11:15PM +0200, Daniel Baluta wrote:
> Requesting an mailbox channel will call mailbox's startup
> function.
>
> startup function calls pm_runtime_get_sync which increments device usage
> count and will keep the device active. Specifically, mailbox clock will
> be always ON when a mailbox channel is requested.
>
> For this, reason we introduce a way to request/free IMX DSP channels
> on demand to save power when the channels are not used.
>
> First two patches are doing code refactoring preparing the path
> for 3rd patch which exports functions for on demand channel request/free
>
>
> Daniel Baluta (3):
> firmware: imx: Introduce imx_dsp_setup_channels
> firmware: imx: Save channel name for further use
> firmware: imx-dsp: Export functions to request/free channels
Applied all, thanks.
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply [flat|nested] 10+ messages in thread