[PATCH v6 00/18] gpiolib: acpi: pin configuration fixes

[PATCH v6 00/18] gpiolib: acpi: pin configuration fixes

[Andy Shevchenko]

There are fixes (and plenty cleanups) that allow to take into consideration
more parameters in ACPI, i.e. bias for GpioInt() and debounce timeout
for Operation Regions, Events and GpioInt() resources.

During review Hans noted, that gpiod_set_debounce() returns -ENOTSUPP for
the cases when feature is not supported either by driver or a controller.

It appears that we have slightly messy API here:

  FUNC			Relation with ENOTSUPP

  gpiod_set_config()	 returns if not supported
  gpiod_set_debounce()	 as gpiod_set_config() above
  gpio_set_debounce()	 legacy wrapper on top of gpiod_set_debounce()
  gpiod_set_transitory() skips it (returns okay) with debug message
  gpio_set_config()	 returns if not supported
  gpio_set_bias()	 skips it (returns okay)

Last two functions are internal to GPIO library, while the rest is
exported API. In order to be consistent with both naming schemas
the series introduces gpio_set_debounce_timeout() that considers
the feature optional. New API is only for internal use.

While at it, the few first patches clean up the current GPIO library
code to unify it to some extend.

The above is followed by changes made in ACPI GPIO library part.

The bias patch highly depends on Intel pin control driver changes
(they are material for v5.10 [1]), due to this and amount of the
prerequisite changes this series is probably not supposed to be
backported (at least right now).

The last patch adds Intel GPIO tree as official one for ACPI GPIO
changes.

Assuming [1] makes v5.10 this series can be sent as PR to Linus
for v5.11 cycle.

Note, some patches are also depend to the code from GPIO fixes / for-next
repositories. Unfortunately there is no one repository which contains all
up to date for-next changes against GPIO subsystem. That's why I have merged
Linus' for-next followed by Bart's for-next branches as prerequisites
to the series.

Cc: Jamie McClymont <jamie@kwiius.com>
Cc: Coiby Xu <coiby.xu@gmail.com>
Cc: Vasile-Laurentiu Stanimir <vasile-laurentiu.stanimir@windriver.com>

[1]: https://lore.kernel.org/linux-gpio/20201106181938.GA41213@black.fi.intel.com/

Changelog v6:
- added tags (Hans, Mika, Linus)
- dropped temporary variables in couple of patches (Mika)
- dropped "Add temporary variable to gpiod_set_transitory()..." (Mika)
- added patch to move assignments outside a lock (Mika)
- added patch from Vasile
- due to above rebased accordingly the affected ones

Changelog v5:
- introduced gpio_set_debounce_timeout()
- made a prerequisite refactoring in GPIO library code
- updated the rest accordingly

Changelog v4:
- extended debounce setting to ACPI events and Operation Regions
- added Ack (Linus)
- added few more cleanup patches, including MAINTAINERS update

Changelog v3:
- dropped upstreamed OF patch
- added debounce fix

Andy Shevchenko (17):
  gpiolib: use proper API to pack pin configuration parameters
  gpiolib: Extract gpio_set_config_with_argument() for future use
  gpiolib: move bias related code from gpio_set_config() to
    gpio_set_bias()
  gpiolib: Extract gpio_set_config_with_argument_optional() helper
  gpiolib: Introduce gpio_set_debounce_timeout() for internal use
  gpiolib: acpi: Respect bias settings for GpioInt() resource
  gpiolib: acpi: Use named item for enum gpiod_flags variable
  gpiolib: acpi: Take into account debounce settings
  gpiolib: acpi: Move non-critical code outside of critical section
  gpiolib: acpi: Move acpi_gpio_to_gpiod_flags() upper in the code
  gpiolib: acpi: Make acpi_gpio_to_gpiod_flags() usable for GpioInt()
  gpiolib: acpi: Extract acpi_request_own_gpiod() helper
  gpiolib: acpi: Convert pin_index to be u16
  gpiolib: acpi: Use BIT() macro to increase readability
  gpiolib: acpi: Make Intel GPIO tree official for GPIO ACPI work
  sh: Drop ARCH_NR_GPIOS definition
  ARM: Drop ARCH_NR_GPIOS definition

Vasile-Laurentiu Stanimir (1):
  gpiolib: acpi: Set initial value for output pin based on bias and
    polarity

 MAINTAINERS                 |   1 +
 arch/arm/include/asm/gpio.h |   4 --
 arch/sh/include/asm/gpio.h  |   1 -
 drivers/gpio/gpiolib-acpi.c | 138 ++++++++++++++++++++++--------------
 drivers/gpio/gpiolib-acpi.h |   2 +
 drivers/gpio/gpiolib.c      |  83 +++++++++++++---------
 drivers/gpio/gpiolib.h      |   1 +
 7 files changed, 137 insertions(+), 93 deletions(-)

-- 
2.28.0

[PATCH v6 01/18] gpiolib: use proper API to pack pin configuration parameters

[Andy Shevchenko]

Instead of open coded macro use, call pinconf_to_config_packed().

Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com>
---
 drivers/gpio/gpiolib.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/gpio/gpiolib.c b/drivers/gpio/gpiolib.c
index b45487aace7e..87bb73991337 100644
--- a/drivers/gpio/gpiolib.c
+++ b/drivers/gpio/gpiolib.c
@@ -2111,7 +2111,7 @@ static int gpio_set_config(struct gpio_desc *desc, enum pin_config_param mode)
 		break;
 	}
 
-	config = PIN_CONF_PACKED(mode, arg);
+	config = pinconf_to_config_packed(mode, arg);
 	return gpio_do_set_config(gc, gpio_chip_hwgpio(desc), config);
 }
 
-- 
2.28.0

[PATCH v6 02/18] gpiolib: Extract gpio_set_config_with_argument() for future use

[Andy Shevchenko]

In the future we will need to have a separate function
that takes an arbitrary argument value.

Extract gpio_set_config_with_argument() for that purpose.

Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com>
---
 drivers/gpio/gpiolib.c | 14 +++++++++++---
 1 file changed, 11 insertions(+), 3 deletions(-)

diff --git a/drivers/gpio/gpiolib.c b/drivers/gpio/gpiolib.c
index 87bb73991337..5210f396f0cd 100644
--- a/drivers/gpio/gpiolib.c
+++ b/drivers/gpio/gpiolib.c
@@ -2094,10 +2094,19 @@ static int gpio_do_set_config(struct gpio_chip *gc, unsigned int offset,
 	return gc->set_config(gc, offset, config);
 }
 
-static int gpio_set_config(struct gpio_desc *desc, enum pin_config_param mode)
+static int gpio_set_config_with_argument(struct gpio_desc *desc,
+					 enum pin_config_param mode,
+					 u32 argument)
 {
 	struct gpio_chip *gc = desc->gdev->chip;
 	unsigned long config;
+
+	config = pinconf_to_config_packed(mode, argument);
+	return gpio_do_set_config(gc, gpio_chip_hwgpio(desc), config);
+}
+
+static int gpio_set_config(struct gpio_desc *desc, enum pin_config_param mode)
+{
 	unsigned int arg;
 
 	switch (mode) {
@@ -2111,8 +2120,7 @@ static int gpio_set_config(struct gpio_desc *desc, enum pin_config_param mode)
 		break;
 	}
 
-	config = pinconf_to_config_packed(mode, arg);
-	return gpio_do_set_config(gc, gpio_chip_hwgpio(desc), config);
+	return gpio_set_config_with_argument(desc, mode, arg);
 }
 
 static int gpio_set_bias(struct gpio_desc *desc)
-- 
2.28.0

[PATCH v6 03/18] gpiolib: move bias related code from gpio_set_config() to gpio_set_bias()

[Andy Shevchenko]

Move bias related code from gpio_set_config() to gpio_set_bias().

Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com>
---
 drivers/gpio/gpiolib.c | 29 ++++++++++++++---------------
 1 file changed, 14 insertions(+), 15 deletions(-)

diff --git a/drivers/gpio/gpiolib.c b/drivers/gpio/gpiolib.c
index 5210f396f0cd..2bfc44ca4425 100644
--- a/drivers/gpio/gpiolib.c
+++ b/drivers/gpio/gpiolib.c
@@ -2107,25 +2107,13 @@ static int gpio_set_config_with_argument(struct gpio_desc *desc,
 
 static int gpio_set_config(struct gpio_desc *desc, enum pin_config_param mode)
 {
-	unsigned int arg;
-
-	switch (mode) {
-	case PIN_CONFIG_BIAS_PULL_DOWN:
-	case PIN_CONFIG_BIAS_PULL_UP:
-		arg = 1;
-		break;
-
-	default:
-		arg = 0;
-		break;
-	}
-
-	return gpio_set_config_with_argument(desc, mode, arg);
+	return gpio_set_config_with_argument(desc, mode, 0);
 }
 
 static int gpio_set_bias(struct gpio_desc *desc)
 {
 	enum pin_config_param bias;
+	unsigned int arg;
 	int ret;
 
 	if (test_bit(FLAG_BIAS_DISABLE, &desc->flags))
@@ -2137,7 +2125,18 @@ static int gpio_set_bias(struct gpio_desc *desc)
 	else
 		return 0;
 
-	ret = gpio_set_config(desc, bias);
+	switch (bias) {
+	case PIN_CONFIG_BIAS_PULL_DOWN:
+	case PIN_CONFIG_BIAS_PULL_UP:
+		arg = 1;
+		break;
+
+	default:
+		arg = 0;
+		break;
+	}
+
+	ret = gpio_set_config_with_argument(desc, bias, arg);
 	if (ret != -ENOTSUPP)
 		return ret;
 
-- 
2.28.0

[PATCH v6 04/18] gpiolib: Extract gpio_set_config_with_argument_optional() helper

[Andy Shevchenko]

This function is useful for internal use in the GPIO library.
There will be new user coming, prepare a helper for the new comer
and the existing ones.

Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com>
---
 drivers/gpio/gpiolib.c | 53 +++++++++++++++++++++---------------------
 1 file changed, 27 insertions(+), 26 deletions(-)

diff --git a/drivers/gpio/gpiolib.c b/drivers/gpio/gpiolib.c
index 2bfc44ca4425..c4f73597a54d 100644
--- a/drivers/gpio/gpiolib.c
+++ b/drivers/gpio/gpiolib.c
@@ -2105,6 +2105,29 @@ static int gpio_set_config_with_argument(struct gpio_desc *desc,
 	return gpio_do_set_config(gc, gpio_chip_hwgpio(desc), config);
 }
 
+static int gpio_set_config_with_argument_optional(struct gpio_desc *desc,
+						  enum pin_config_param mode,
+						  u32 argument)
+{
+	struct device *dev = &desc->gdev->dev;
+	int gpio = gpio_chip_hwgpio(desc);
+	int ret;
+
+	ret = gpio_set_config_with_argument(desc, mode, argument);
+	if (ret != -ENOTSUPP)
+		return ret;
+
+	switch (mode) {
+	case PIN_CONFIG_PERSIST_STATE:
+		dev_dbg(dev, "Persistence not supported for GPIO %d\n", gpio);
+		break;
+	default:
+		break;
+	}
+
+	return 0;
+}
+
 static int gpio_set_config(struct gpio_desc *desc, enum pin_config_param mode)
 {
 	return gpio_set_config_with_argument(desc, mode, 0);
@@ -2114,7 +2137,6 @@ static int gpio_set_bias(struct gpio_desc *desc)
 {
 	enum pin_config_param bias;
 	unsigned int arg;
-	int ret;
 
 	if (test_bit(FLAG_BIAS_DISABLE, &desc->flags))
 		bias = PIN_CONFIG_BIAS_DISABLE;
@@ -2136,11 +2158,7 @@ static int gpio_set_bias(struct gpio_desc *desc)
 		break;
 	}
 
-	ret = gpio_set_config_with_argument(desc, bias, arg);
-	if (ret != -ENOTSUPP)
-		return ret;
-
-	return 0;
+	return gpio_set_config_with_argument_optional(desc, bias, arg);
 }
 
 /**
@@ -2381,11 +2399,6 @@ EXPORT_SYMBOL_GPL(gpiod_set_debounce);
  */
 int gpiod_set_transitory(struct gpio_desc *desc, bool transitory)
 {
-	struct gpio_chip *gc;
-	unsigned long packed;
-	int gpio;
-	int rc;
-
 	VALIDATE_DESC(desc);
 	/*
 	 * Handle FLAG_TRANSITORY first, enabling queries to gpiolib for
@@ -2394,21 +2407,9 @@ int gpiod_set_transitory(struct gpio_desc *desc, bool transitory)
 	assign_bit(FLAG_TRANSITORY, &desc->flags, transitory);
 
 	/* If the driver supports it, set the persistence state now */
-	gc = desc->gdev->chip;
-	if (!gc->set_config)
-		return 0;
-
-	packed = pinconf_to_config_packed(PIN_CONFIG_PERSIST_STATE,
-					  !transitory);
-	gpio = gpio_chip_hwgpio(desc);
-	rc = gpio_do_set_config(gc, gpio, packed);
-	if (rc == -ENOTSUPP) {
-		dev_dbg(&desc->gdev->dev, "Persistence not supported for GPIO %d\n",
-				gpio);
-		return 0;
-	}
-
-	return rc;
+	return gpio_set_config_with_argument_optional(desc,
+						      PIN_CONFIG_PERSIST_STATE,
+						      !transitory);
 }
 EXPORT_SYMBOL_GPL(gpiod_set_transitory);
 
-- 
2.28.0

[PATCH v6 05/18] gpiolib: Introduce gpio_set_debounce_timeout() for internal use

[Andy Shevchenko]

In some cases we would like to have debounce setter which doesn't fail
when a feature is not supported by a controller.

Cc: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
---
 drivers/gpio/gpiolib.c | 7 +++++++
 drivers/gpio/gpiolib.h | 1 +
 2 files changed, 8 insertions(+)

diff --git a/drivers/gpio/gpiolib.c b/drivers/gpio/gpiolib.c
index c4f73597a54d..0d691ec512a4 100644
--- a/drivers/gpio/gpiolib.c
+++ b/drivers/gpio/gpiolib.c
@@ -2161,6 +2161,13 @@ static int gpio_set_bias(struct gpio_desc *desc)
 	return gpio_set_config_with_argument_optional(desc, bias, arg);
 }
 
+int gpio_set_debounce_timeout(struct gpio_desc *desc, unsigned int debounce)
+{
+	return gpio_set_config_with_argument_optional(desc,
+						      PIN_CONFIG_INPUT_DEBOUNCE,
+						      debounce);
+}
+
 /**
  * gpiod_direction_input - set the GPIO direction to input
  * @desc:	GPIO to set to input
diff --git a/drivers/gpio/gpiolib.h b/drivers/gpio/gpiolib.h
index 16bc5731673c..9b1a1c782704 100644
--- a/drivers/gpio/gpiolib.h
+++ b/drivers/gpio/gpiolib.h
@@ -136,6 +136,7 @@ int gpiod_request(struct gpio_desc *desc, const char *label);
 void gpiod_free(struct gpio_desc *desc);
 int gpiod_configure_flags(struct gpio_desc *desc, const char *con_id,
 		unsigned long lflags, enum gpiod_flags dflags);
+int gpio_set_debounce_timeout(struct gpio_desc *desc, unsigned int debounce);
 int gpiod_hog(struct gpio_desc *desc, const char *name,
 		unsigned long lflags, enum gpiod_flags dflags);
 
-- 
2.28.0

[PATCH v6 06/18] gpiolib: acpi: Respect bias settings for GpioInt() resource

[Andy Shevchenko]

In some cases the GpioInt() resource is coming with bias settings
which may affect system functioning. Respect bias settings for
GpioInt() resource by calling acpi_gpio_update_gpiod_*flags() API
in acpi_dev_gpio_irq_get().

Reported-by: Jamie McClymont <jamie@kwiius.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com>
---
 drivers/gpio/gpiolib-acpi.c | 6 +++++-
 1 file changed, 5 insertions(+), 1 deletion(-)

diff --git a/drivers/gpio/gpiolib-acpi.c b/drivers/gpio/gpiolib-acpi.c
index 834a12f3219e..3a39e8a93226 100644
--- a/drivers/gpio/gpiolib-acpi.c
+++ b/drivers/gpio/gpiolib-acpi.c
@@ -942,6 +942,7 @@ int acpi_dev_gpio_irq_get(struct acpi_device *adev, int index)
 
 		if (info.gpioint && idx++ == index) {
 			unsigned long lflags = GPIO_LOOKUP_FLAGS_DEFAULT;
+			enum gpiod_flags dflags = GPIOD_ASIS;
 			char label[32];
 			int irq;
 
@@ -952,8 +953,11 @@ int acpi_dev_gpio_irq_get(struct acpi_device *adev, int index)
 			if (irq < 0)
 				return irq;
 
+			acpi_gpio_update_gpiod_flags(&dflags, &info);
+			acpi_gpio_update_gpiod_lookup_flags(&lflags, &info);
+
 			snprintf(label, sizeof(label), "GpioInt() %d", index);
-			ret = gpiod_configure_flags(desc, label, lflags, info.flags);
+			ret = gpiod_configure_flags(desc, label, lflags, dflags);
 			if (ret < 0)
 				return ret;
 
-- 
2.28.0

[PATCH v6 07/18] gpiolib: acpi: Use named item for enum gpiod_flags variable

[Andy Shevchenko]

Use named item instead of plain integer for enum gpiod_flags
to make it clear that even 0 has its own meaning.

Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com>
---
 drivers/gpio/gpiolib-acpi.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/gpio/gpiolib-acpi.c b/drivers/gpio/gpiolib-acpi.c
index 3a39e8a93226..c127b410a7a2 100644
--- a/drivers/gpio/gpiolib-acpi.c
+++ b/drivers/gpio/gpiolib-acpi.c
@@ -1136,7 +1136,7 @@ acpi_gpiochip_parse_own_gpio(struct acpi_gpio_chip *achip,
 	int ret;
 
 	*lflags = GPIO_LOOKUP_FLAGS_DEFAULT;
-	*dflags = 0;
+	*dflags = GPIOD_ASIS;
 	*name = NULL;
 
 	ret = fwnode_property_read_u32_array(fwnode, "gpios", gpios,
-- 
2.28.0

[PATCH v6 08/18] gpiolib: acpi: Take into account debounce settings

[Andy Shevchenko]

We didn't take into account the debounce settings supplied by ACPI.
This change is targeting the mentioned gap.

Reported-by: Coiby Xu <coiby.xu@gmail.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com>
---
 drivers/gpio/gpiolib-acpi.c | 18 ++++++++++++++++++
 drivers/gpio/gpiolib-acpi.h |  2 ++
 2 files changed, 20 insertions(+)

diff --git a/drivers/gpio/gpiolib-acpi.c b/drivers/gpio/gpiolib-acpi.c
index c127b410a7a2..a9254de964cc 100644
--- a/drivers/gpio/gpiolib-acpi.c
+++ b/drivers/gpio/gpiolib-acpi.c
@@ -299,6 +299,10 @@ static acpi_status acpi_gpiochip_alloc_event(struct acpi_resource *ares,
 		return AE_OK;
 	}
 
+	ret = gpio_set_debounce_timeout(desc, agpio->debounce_timeout);
+	if (ret)
+		goto fail_free_desc;
+
 	ret = gpiochip_lock_as_irq(chip, pin);
 	if (ret) {
 		dev_err(chip->parent,
@@ -664,6 +668,7 @@ static int acpi_populate_gpio_lookup(struct acpi_resource *ares, void *data)
 		lookup->desc = acpi_get_gpiod(agpio->resource_source.string_ptr,
 					      agpio->pin_table[pin_index]);
 		lookup->info.pin_config = agpio->pin_config;
+		lookup->info.debounce = agpio->debounce_timeout;
 		lookup->info.gpioint = gpioint;
 
 		/*
@@ -961,6 +966,10 @@ int acpi_dev_gpio_irq_get(struct acpi_device *adev, int index)
 			if (ret < 0)
 				return ret;
 
+			ret = gpio_set_debounce_timeout(desc, info.debounce);
+			if (ret)
+				return ret;
+
 			irq_flags = acpi_dev_get_irq_type(info.triggering,
 							  info.polarity);
 
@@ -1048,6 +1057,7 @@ acpi_gpio_adr_space_handler(u32 function, acpi_physical_address address,
 		if (!found) {
 			enum gpiod_flags flags = acpi_gpio_to_gpiod_flags(agpio);
 			const char *label = "ACPI:OpRegion";
+			int ret;
 
 			desc = gpiochip_request_own_desc(chip, pin, label,
 							 GPIO_ACTIVE_HIGH,
@@ -1058,6 +1068,14 @@ acpi_gpio_adr_space_handler(u32 function, acpi_physical_address address,
 				goto out;
 			}
 
+			ret = gpio_set_debounce_timeout(desc, agpio->debounce_timeout);
+			if (ret) {
+				gpiochip_free_own_desc(desc);
+				mutex_unlock(&achip->conn_lock);
+				status = AE_ERROR;
+				goto out;
+			}
+
 			conn = kzalloc(sizeof(*conn), GFP_KERNEL);
 			if (!conn) {
 				status = AE_NO_MEMORY;
diff --git a/drivers/gpio/gpiolib-acpi.h b/drivers/gpio/gpiolib-acpi.h
index 1c6d65cf0629..e2edb632b2cc 100644
--- a/drivers/gpio/gpiolib-acpi.h
+++ b/drivers/gpio/gpiolib-acpi.h
@@ -18,6 +18,7 @@ struct acpi_device;
  * @pin_config: pin bias as provided by ACPI
  * @polarity: interrupt polarity as provided by ACPI
  * @triggering: triggering type as provided by ACPI
+ * @debounce: debounce timeout as provided by ACPI
  * @quirks: Linux specific quirks as provided by struct acpi_gpio_mapping
  */
 struct acpi_gpio_info {
@@ -27,6 +28,7 @@ struct acpi_gpio_info {
 	int pin_config;
 	int polarity;
 	int triggering;
+	unsigned int debounce;
 	unsigned int quirks;
 };
 
-- 
2.28.0

[PATCH v6 09/18] gpiolib: acpi: Move non-critical code outside of critical section

[Andy Shevchenko]

Mika noticed that some code is run under mutex when it doesn't require
the lock, like an error code assignment.

Move non-critical code outside of critical section.

Suggested-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Cc: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
---
 drivers/gpio/gpiolib-acpi.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/gpio/gpiolib-acpi.c b/drivers/gpio/gpiolib-acpi.c
index a9254de964cc..b00171d2aaf5 100644
--- a/drivers/gpio/gpiolib-acpi.c
+++ b/drivers/gpio/gpiolib-acpi.c
@@ -1063,8 +1063,8 @@ acpi_gpio_adr_space_handler(u32 function, acpi_physical_address address,
 							 GPIO_ACTIVE_HIGH,
 							 flags);
 			if (IS_ERR(desc)) {
-				status = AE_ERROR;
 				mutex_unlock(&achip->conn_lock);
+				status = AE_ERROR;
 				goto out;
 			}
 
@@ -1078,9 +1078,9 @@ acpi_gpio_adr_space_handler(u32 function, acpi_physical_address address,
 
 			conn = kzalloc(sizeof(*conn), GFP_KERNEL);
 			if (!conn) {
-				status = AE_NO_MEMORY;
 				gpiochip_free_own_desc(desc);
 				mutex_unlock(&achip->conn_lock);
+				status = AE_NO_MEMORY;
 				goto out;
 			}
 
-- 
2.28.0

[PATCH v6 10/18] gpiolib: acpi: Move acpi_gpio_to_gpiod_flags() upper in the code

[Andy Shevchenko]

Move acpi_gpio_to_gpiod_flags() upper in the code to allow further refactoring.

Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com>
---
 drivers/gpio/gpiolib-acpi.c | 66 ++++++++++++++++++-------------------
 1 file changed, 33 insertions(+), 33 deletions(-)

diff --git a/drivers/gpio/gpiolib-acpi.c b/drivers/gpio/gpiolib-acpi.c
index b00171d2aaf5..ac1bde0720f2 100644
--- a/drivers/gpio/gpiolib-acpi.c
+++ b/drivers/gpio/gpiolib-acpi.c
@@ -205,6 +205,39 @@ static void acpi_gpiochip_request_irqs(struct acpi_gpio_chip *acpi_gpio)
 		acpi_gpiochip_request_irq(acpi_gpio, event);
 }
 
+static enum gpiod_flags
+acpi_gpio_to_gpiod_flags(const struct acpi_resource_gpio *agpio)
+{
+	switch (agpio->io_restriction) {
+	case ACPI_IO_RESTRICT_INPUT:
+		return GPIOD_IN;
+	case ACPI_IO_RESTRICT_OUTPUT:
+		/*
+		 * ACPI GPIO resources don't contain an initial value for the
+		 * GPIO. Therefore we deduce that value from the pull field
+		 * instead. If the pin is pulled up we assume default to be
+		 * high, if it is pulled down we assume default to be low,
+		 * otherwise we leave pin untouched.
+		 */
+		switch (agpio->pin_config) {
+		case ACPI_PIN_CONFIG_PULLUP:
+			return GPIOD_OUT_HIGH;
+		case ACPI_PIN_CONFIG_PULLDOWN:
+			return GPIOD_OUT_LOW;
+		default:
+			break;
+		}
+	default:
+		break;
+	}
+
+	/*
+	 * Assume that the BIOS has configured the direction and pull
+	 * accordingly.
+	 */
+	return GPIOD_ASIS;
+}
+
 static bool acpi_gpio_in_ignore_list(const char *controller_in, int pin_in)
 {
 	const char *controller, *pin_str;
@@ -530,39 +563,6 @@ static bool acpi_get_driver_gpio_data(struct acpi_device *adev,
 	return false;
 }
 
-static enum gpiod_flags
-acpi_gpio_to_gpiod_flags(const struct acpi_resource_gpio *agpio)
-{
-	switch (agpio->io_restriction) {
-	case ACPI_IO_RESTRICT_INPUT:
-		return GPIOD_IN;
-	case ACPI_IO_RESTRICT_OUTPUT:
-		/*
-		 * ACPI GPIO resources don't contain an initial value for the
-		 * GPIO. Therefore we deduce that value from the pull field
-		 * instead. If the pin is pulled up we assume default to be
-		 * high, if it is pulled down we assume default to be low,
-		 * otherwise we leave pin untouched.
-		 */
-		switch (agpio->pin_config) {
-		case ACPI_PIN_CONFIG_PULLUP:
-			return GPIOD_OUT_HIGH;
-		case ACPI_PIN_CONFIG_PULLDOWN:
-			return GPIOD_OUT_LOW;
-		default:
-			break;
-		}
-	default:
-		break;
-	}
-
-	/*
-	 * Assume that the BIOS has configured the direction and pull
-	 * accordingly.
-	 */
-	return GPIOD_ASIS;
-}
-
 static int
 __acpi_gpio_update_gpiod_flags(enum gpiod_flags *flags, enum gpiod_flags update)
 {
-- 
2.28.0

[PATCH v6 11/18] gpiolib: acpi: Set initial value for output pin based on bias and polarity

[Andy Shevchenko]

From: Vasile-Laurentiu Stanimir <vasile-laurentiu.stanimir@windriver.com>

GpioIo() resources don't contain an initial value for the output pin.
Therefore instead of deducting its value solely based on bias field
we should deduce that value from the polarity and the bias fields.
Typical scenario is, when pin is defined in the table and its polarity,
specified in _DSD or via platform code, is defined as active low,
in the following call chain:

  -> acpi_populate_gpio_lookup()
     -> acpi_gpio_to_gpiod_flags()

it will return GPIOD_OUT_HIGH if bias is set no matter if polarity
is GPIO_ACTIVE_LOW, so it will return the current level instead of
the logical level.

Cc: Hans de Goede <hdegoede@redhat.com>
Cc: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: Vasile-Laurentiu Stanimir <vasile-laurentiu.stanimir@windriver.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
---
 drivers/gpio/gpiolib-acpi.c | 21 ++++++++++++---------
 1 file changed, 12 insertions(+), 9 deletions(-)

diff --git a/drivers/gpio/gpiolib-acpi.c b/drivers/gpio/gpiolib-acpi.c
index ac1bde0720f2..b47d5e8edaeb 100644
--- a/drivers/gpio/gpiolib-acpi.c
+++ b/drivers/gpio/gpiolib-acpi.c
@@ -206,7 +206,7 @@ static void acpi_gpiochip_request_irqs(struct acpi_gpio_chip *acpi_gpio)
 }
 
 static enum gpiod_flags
-acpi_gpio_to_gpiod_flags(const struct acpi_resource_gpio *agpio)
+acpi_gpio_to_gpiod_flags(const struct acpi_resource_gpio *agpio, int polarity)
 {
 	switch (agpio->io_restriction) {
 	case ACPI_IO_RESTRICT_INPUT:
@@ -215,15 +215,17 @@ acpi_gpio_to_gpiod_flags(const struct acpi_resource_gpio *agpio)
 		/*
 		 * ACPI GPIO resources don't contain an initial value for the
 		 * GPIO. Therefore we deduce that value from the pull field
-		 * instead. If the pin is pulled up we assume default to be
-		 * high, if it is pulled down we assume default to be low,
-		 * otherwise we leave pin untouched.
+		 * and the polarity instead. If the pin is pulled up we assume
+		 * default to be high, if it is pulled down we assume default
+		 * to be low, otherwise we leave pin untouched. For active low
+		 * polarity values will be switched. See also
+		 * Documentation/firmware-guide/acpi/gpio-properties.rst.
 		 */
 		switch (agpio->pin_config) {
 		case ACPI_PIN_CONFIG_PULLUP:
-			return GPIOD_OUT_HIGH;
+			return polarity == GPIO_ACTIVE_LOW ? GPIOD_OUT_LOW : GPIOD_OUT_HIGH;
 		case ACPI_PIN_CONFIG_PULLDOWN:
-			return GPIOD_OUT_LOW;
+			return polarity == GPIO_ACTIVE_LOW ? GPIOD_OUT_HIGH : GPIOD_OUT_LOW;
 		default:
 			break;
 		}
@@ -683,8 +685,8 @@ static int acpi_populate_gpio_lookup(struct acpi_resource *ares, void *data)
 			lookup->info.polarity = agpio->polarity;
 			lookup->info.triggering = agpio->triggering;
 		} else {
-			lookup->info.flags = acpi_gpio_to_gpiod_flags(agpio);
 			lookup->info.polarity = lookup->active_low;
+			lookup->info.flags = acpi_gpio_to_gpiod_flags(agpio, lookup->info.polarity);
 		}
 	}
 
@@ -1055,12 +1057,13 @@ acpi_gpio_adr_space_handler(u32 function, acpi_physical_address address,
 		}
 
 		if (!found) {
-			enum gpiod_flags flags = acpi_gpio_to_gpiod_flags(agpio);
+			int polarity = GPIO_ACTIVE_HIGH;
+			enum gpiod_flags flags = acpi_gpio_to_gpiod_flags(agpio, polarity);
 			const char *label = "ACPI:OpRegion";
 			int ret;
 
 			desc = gpiochip_request_own_desc(chip, pin, label,
-							 GPIO_ACTIVE_HIGH,
+							 polarity,
 							 flags);
 			if (IS_ERR(desc)) {
 				mutex_unlock(&achip->conn_lock);
-- 
2.28.0

[PATCH v6 12/18] gpiolib: acpi: Make acpi_gpio_to_gpiod_flags() usable for GpioInt()

[Andy Shevchenko]

GpioInt() implies input configuration of the pin. Add this to
the acpi_gpio_to_gpiod_flags() and make usable for GpioInt().

Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com>
---
 drivers/gpio/gpiolib-acpi.c | 8 ++++++--
 1 file changed, 6 insertions(+), 2 deletions(-)

diff --git a/drivers/gpio/gpiolib-acpi.c b/drivers/gpio/gpiolib-acpi.c
index b47d5e8edaeb..644067cc0f81 100644
--- a/drivers/gpio/gpiolib-acpi.c
+++ b/drivers/gpio/gpiolib-acpi.c
@@ -208,6 +208,10 @@ static void acpi_gpiochip_request_irqs(struct acpi_gpio_chip *acpi_gpio)
 static enum gpiod_flags
 acpi_gpio_to_gpiod_flags(const struct acpi_resource_gpio *agpio, int polarity)
 {
+	/* GpioInt() implies input configuration */
+	if (agpio->connection_type == ACPI_RESOURCE_GPIO_TYPE_INT)
+		return GPIOD_IN;
+
 	switch (agpio->io_restriction) {
 	case ACPI_IO_RESTRICT_INPUT:
 		return GPIOD_IN;
@@ -681,13 +685,13 @@ static int acpi_populate_gpio_lookup(struct acpi_resource *ares, void *data)
 		 * - ACPI_ACTIVE_HIGH == GPIO_ACTIVE_HIGH
 		 */
 		if (lookup->info.gpioint) {
-			lookup->info.flags = GPIOD_IN;
 			lookup->info.polarity = agpio->polarity;
 			lookup->info.triggering = agpio->triggering;
 		} else {
 			lookup->info.polarity = lookup->active_low;
-			lookup->info.flags = acpi_gpio_to_gpiod_flags(agpio, lookup->info.polarity);
 		}
+
+		lookup->info.flags = acpi_gpio_to_gpiod_flags(agpio, lookup->info.polarity);
 	}
 
 	return 1;
-- 
2.28.0

[PATCH v6 13/18] gpiolib: acpi: Extract acpi_request_own_gpiod() helper

[Andy Shevchenko]

It appears that we are using similar code excerpts for ACPI OpRegion
and event handling. Deduplicate those excerpts by extracting a new
acpi_request_own_gpiod() helper.

Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com>
---
 drivers/gpio/gpiolib-acpi.c | 46 +++++++++++++++++++------------------
 1 file changed, 24 insertions(+), 22 deletions(-)

diff --git a/drivers/gpio/gpiolib-acpi.c b/drivers/gpio/gpiolib-acpi.c
index 644067cc0f81..c46fd51007d0 100644
--- a/drivers/gpio/gpiolib-acpi.c
+++ b/drivers/gpio/gpiolib-acpi.c
@@ -244,6 +244,28 @@ acpi_gpio_to_gpiod_flags(const struct acpi_resource_gpio *agpio, int polarity)
 	return GPIOD_ASIS;
 }
 
+static struct gpio_desc *acpi_request_own_gpiod(struct gpio_chip *chip,
+						struct acpi_resource_gpio *agpio,
+						unsigned int index,
+						const char *label)
+{
+	int polarity = GPIO_ACTIVE_HIGH;
+	enum gpiod_flags flags = acpi_gpio_to_gpiod_flags(agpio, polarity);
+	unsigned int pin = agpio->pin_table[index];
+	struct gpio_desc *desc;
+	int ret;
+
+	desc = gpiochip_request_own_desc(chip, pin, label, polarity, flags);
+	if (IS_ERR(desc))
+		return desc;
+
+	ret = gpio_set_debounce_timeout(desc, agpio->debounce_timeout);
+	if (ret)
+		gpiochip_free_own_desc(desc);
+
+	return ret ? ERR_PTR(ret) : desc;
+}
+
 static bool acpi_gpio_in_ignore_list(const char *controller_in, int pin_in)
 {
 	const char *controller, *pin_str;
@@ -329,8 +351,7 @@ static acpi_status acpi_gpiochip_alloc_event(struct acpi_resource *ares,
 	if (!handler)
 		return AE_OK;
 
-	desc = gpiochip_request_own_desc(chip, pin, "ACPI:Event",
-					 GPIO_ACTIVE_HIGH, GPIOD_IN);
+	desc = acpi_request_own_gpiod(chip, agpio, 0, "ACPI:Event");
 	if (IS_ERR(desc)) {
 		dev_err(chip->parent,
 			"Failed to request GPIO for pin 0x%04X, err %ld\n",
@@ -338,10 +359,6 @@ static acpi_status acpi_gpiochip_alloc_event(struct acpi_resource *ares,
 		return AE_OK;
 	}
 
-	ret = gpio_set_debounce_timeout(desc, agpio->debounce_timeout);
-	if (ret)
-		goto fail_free_desc;
-
 	ret = gpiochip_lock_as_irq(chip, pin);
 	if (ret) {
 		dev_err(chip->parent,
@@ -1061,28 +1078,13 @@ acpi_gpio_adr_space_handler(u32 function, acpi_physical_address address,
 		}
 
 		if (!found) {
-			int polarity = GPIO_ACTIVE_HIGH;
-			enum gpiod_flags flags = acpi_gpio_to_gpiod_flags(agpio, polarity);
-			const char *label = "ACPI:OpRegion";
-			int ret;
-
-			desc = gpiochip_request_own_desc(chip, pin, label,
-							 polarity,
-							 flags);
+			desc = acpi_request_own_gpiod(chip, agpio, i, "ACPI:OpRegion");
 			if (IS_ERR(desc)) {
 				mutex_unlock(&achip->conn_lock);
 				status = AE_ERROR;
 				goto out;
 			}
 
-			ret = gpio_set_debounce_timeout(desc, agpio->debounce_timeout);
-			if (ret) {
-				gpiochip_free_own_desc(desc);
-				mutex_unlock(&achip->conn_lock);
-				status = AE_ERROR;
-				goto out;
-			}
-
 			conn = kzalloc(sizeof(*conn), GFP_KERNEL);
 			if (!conn) {
 				gpiochip_free_own_desc(desc);
-- 
2.28.0

[PATCH v6 14/18] gpiolib: acpi: Convert pin_index to be u16

[Andy Shevchenko]

As specified by ACPI the pin index is 16-bit unsigned integer.
Define the variable, which holds it, accordingly.

Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com>
---
 drivers/gpio/gpiolib-acpi.c | 10 +++++-----
 1 file changed, 5 insertions(+), 5 deletions(-)

diff --git a/drivers/gpio/gpiolib-acpi.c b/drivers/gpio/gpiolib-acpi.c
index c46fd51007d0..a556e2ec0a39 100644
--- a/drivers/gpio/gpiolib-acpi.c
+++ b/drivers/gpio/gpiolib-acpi.c
@@ -660,7 +660,7 @@ int acpi_gpio_update_gpiod_lookup_flags(unsigned long *lookupflags,
 struct acpi_gpio_lookup {
 	struct acpi_gpio_info info;
 	int index;
-	int pin_index;
+	u16 pin_index;
 	bool active_low;
 	struct gpio_desc *desc;
 	int n;
@@ -676,7 +676,7 @@ static int acpi_populate_gpio_lookup(struct acpi_resource *ares, void *data)
 	if (!lookup->desc) {
 		const struct acpi_resource_gpio *agpio = &ares->data.gpio;
 		bool gpioint = agpio->connection_type == ACPI_RESOURCE_GPIO_TYPE_INT;
-		int pin_index;
+		u16 pin_index;
 
 		if (lookup->info.quirks & ACPI_GPIO_QUIRK_ONLY_GPIOIO && gpioint)
 			lookup->index++;
@@ -822,7 +822,7 @@ static struct gpio_desc *acpi_get_gpiod_by_index(struct acpi_device *adev,
 		if (ret)
 			return ERR_PTR(ret);
 
-		dev_dbg(&adev->dev, "GPIO: _DSD returned %s %d %d %u\n",
+		dev_dbg(&adev->dev, "GPIO: _DSD returned %s %d %u %u\n",
 			dev_name(&lookup.info.adev->dev), lookup.index,
 			lookup.pin_index, lookup.active_low);
 	} else {
@@ -1018,7 +1018,7 @@ acpi_gpio_adr_space_handler(u32 function, acpi_physical_address address,
 	struct gpio_chip *chip = achip->chip;
 	struct acpi_resource_gpio *agpio;
 	struct acpi_resource *ares;
-	int pin_index = (int)address;
+	u16 pin_index = address;
 	acpi_status status;
 	int length;
 	int i;
@@ -1041,7 +1041,7 @@ acpi_gpio_adr_space_handler(u32 function, acpi_physical_address address,
 		return AE_BAD_PARAMETER;
 	}
 
-	length = min(agpio->pin_table_length, (u16)(pin_index + bits));
+	length = min_t(u16, agpio->pin_table_length, pin_index + bits);
 	for (i = pin_index; i < length; ++i) {
 		int pin = agpio->pin_table[i];
 		struct acpi_gpio_connection *conn;
-- 
2.28.0

[PATCH v6 15/18] gpiolib: acpi: Use BIT() macro to increase readability

[Andy Shevchenko]

We may use BIT() macro to increase readability in
acpi_gpio_adr_space_handler().

Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com>
---
 drivers/gpio/gpiolib-acpi.c | 3 +--
 1 file changed, 1 insertion(+), 2 deletions(-)

diff --git a/drivers/gpio/gpiolib-acpi.c b/drivers/gpio/gpiolib-acpi.c
index a556e2ec0a39..6cc5f91bfe2e 100644
--- a/drivers/gpio/gpiolib-acpi.c
+++ b/drivers/gpio/gpiolib-acpi.c
@@ -1101,8 +1101,7 @@ acpi_gpio_adr_space_handler(u32 function, acpi_physical_address address,
 		mutex_unlock(&achip->conn_lock);
 
 		if (function == ACPI_WRITE)
-			gpiod_set_raw_value_cansleep(desc,
-						     !!((1 << i) & *value));
+			gpiod_set_raw_value_cansleep(desc, !!(*value & BIT(i)));
 		else
 			*value |= (u64)gpiod_get_raw_value_cansleep(desc) << i;
 	}
-- 
2.28.0

[PATCH v6 16/18] gpiolib: acpi: Make Intel GPIO tree official for GPIO ACPI work

[Andy Shevchenko]

Make Intel GPIO tree official for GPIO ACPI work.

Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
---
 MAINTAINERS | 1 +
 1 file changed, 1 insertion(+)

diff --git a/MAINTAINERS b/MAINTAINERS
index e73636b75f29..53236b2ea0af 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -7483,6 +7483,7 @@ M:	Andy Shevchenko <andriy.shevchenko@linux.intel.com>
 L:	linux-gpio@vger.kernel.org
 L:	linux-acpi@vger.kernel.org
 S:	Maintained
+T:	git git://git.kernel.org/pub/scm/linux/kernel/git/andy/linux-gpio-intel.git
 F:	Documentation/firmware-guide/acpi/gpio-properties.rst
 F:	drivers/gpio/gpiolib-acpi.c
 F:	drivers/gpio/gpiolib-acpi.h
-- 
2.28.0

[PATCH v6 17/18] sh: Drop ARCH_NR_GPIOS definition

[Andy Shevchenko]

The default by generic header is the same, hence drop unnecessary definition.

Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
---
 arch/sh/include/asm/gpio.h | 1 -
 1 file changed, 1 deletion(-)

diff --git a/arch/sh/include/asm/gpio.h b/arch/sh/include/asm/gpio.h
index 351918894e86..d643250f0a0f 100644
--- a/arch/sh/include/asm/gpio.h
+++ b/arch/sh/include/asm/gpio.h
@@ -16,7 +16,6 @@
 #include <cpu/gpio.h>
 #endif
 
-#define ARCH_NR_GPIOS 512
 #include <asm-generic/gpio.h>
 
 #ifdef CONFIG_GPIOLIB
-- 
2.28.0

[PATCH v6 18/18] ARM: Drop ARCH_NR_GPIOS definition

[Andy Shevchenko]

The conditional by the generic header is the same,
hence drop unnecessary duplication.

Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
---
 arch/arm/include/asm/gpio.h | 4 ----
 1 file changed, 4 deletions(-)

diff --git a/arch/arm/include/asm/gpio.h b/arch/arm/include/asm/gpio.h
index c50e383358c4..f3bb8a2bf788 100644
--- a/arch/arm/include/asm/gpio.h
+++ b/arch/arm/include/asm/gpio.h
@@ -2,10 +2,6 @@
 #ifndef _ARCH_ARM_GPIO_H
 #define _ARCH_ARM_GPIO_H
 
-#if CONFIG_ARCH_NR_GPIO > 0
-#define ARCH_NR_GPIOS CONFIG_ARCH_NR_GPIO
-#endif
-
 /* Note: this may rely upon the value of ARCH_NR_GPIOS set in mach/gpio.h */
 #include <asm-generic/gpio.h>
 
-- 
2.28.0

Re: [PATCH v6 00/18] gpiolib: acpi: pin configuration fixes

[Andy Shevchenko]

On Thu, Nov 12, 2020 at 12:06 AM Andy Shevchenko
<andriy.shevchenko@linux.intel.com> wrote:
>
> There are fixes (and plenty cleanups) that allow to take into consideration
> more parameters in ACPI, i.e. bias for GpioInt() and debounce timeout
> for Operation Regions, Events and GpioInt() resources.
>
> During review Hans noted, that gpiod_set_debounce() returns -ENOTSUPP for
> the cases when feature is not supported either by driver or a controller.
>
> It appears that we have slightly messy API here:

Please, discard this version, I mistakenly sent shifted series (missed
first patches and extra in the end)

-- 
With Best Regards,
Andy Shevchenko

Re: [PATCH v6 18/18] ARM: Drop ARCH_NR_GPIOS definition

[Andy Shevchenko]

On Thu, Nov 12, 2020 at 12:07 AM Andy Shevchenko
<andriy.shevchenko@linux.intel.com> wrote:
>
> The conditional by the generic header is the same,
> hence drop unnecessary duplication.

This has been sent by mistake, sorry. Please use v1 of this standalone change.

-- 
With Best Regards,
Andy Shevchenko

Re: [PATCH v6 17/18] sh: Drop ARCH_NR_GPIOS definition

[Andy Shevchenko]

On Thu, Nov 12, 2020 at 12:07 AM Andy Shevchenko
<andriy.shevchenko@linux.intel.com> wrote:
>
> The default by generic header is the same, hence drop unnecessary definition.

Sorry, sent by mistake, please ignore this email.

-- 
With Best Regards,
Andy Shevchenko