* [PATCH] ARM: dts: BCM5301X: Enable USB 3 PHY on Luxul XWR-3150
@ 2020-11-13 9:50 ` Rafał Miłecki
0 siblings, 0 replies; 17+ messages in thread
From: Rafał Miłecki @ 2020-11-13 9:50 UTC (permalink / raw)
To: Florian Fainelli
Cc: Hauke Mehrtens, linux-arm-kernel, devicetree,
bcm-kernel-feedback-list, Rafał Miłecki
From: Rafał Miłecki <rafal@milecki.pl>
This device has a functional USB 3 port so PHY is required.
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
---
arch/arm/boot/dts/bcm47094-luxul-xwr-3150-v1.dts | 4 ++++
1 file changed, 4 insertions(+)
diff --git a/arch/arm/boot/dts/bcm47094-luxul-xwr-3150-v1.dts b/arch/arm/boot/dts/bcm47094-luxul-xwr-3150-v1.dts
index 4d5c5aa7dc42..1a6b9f56d67a 100644
--- a/arch/arm/boot/dts/bcm47094-luxul-xwr-3150-v1.dts
+++ b/arch/arm/boot/dts/bcm47094-luxul-xwr-3150-v1.dts
@@ -71,6 +71,10 @@ &usb3 {
vcc-gpio = <&chipcommon 18 GPIO_ACTIVE_HIGH>;
};
+&usb3_phy {
+ status = "okay";
+}
+
&spi_nor {
status = "okay";
};
--
2.27.0
^ permalink raw reply related [flat|nested] 17+ messages in thread
* [PATCH] ARM: dts: BCM5301X: Enable USB 3 PHY on Luxul XWR-3150
@ 2020-11-13 9:50 ` Rafał Miłecki
0 siblings, 0 replies; 17+ messages in thread
From: Rafał Miłecki @ 2020-11-13 9:50 UTC (permalink / raw)
To: Florian Fainelli
Cc: Rafał Miłecki, Hauke Mehrtens,
bcm-kernel-feedback-list, linux-arm-kernel, devicetree
From: Rafał Miłecki <rafal@milecki.pl>
This device has a functional USB 3 port so PHY is required.
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
---
arch/arm/boot/dts/bcm47094-luxul-xwr-3150-v1.dts | 4 ++++
1 file changed, 4 insertions(+)
diff --git a/arch/arm/boot/dts/bcm47094-luxul-xwr-3150-v1.dts b/arch/arm/boot/dts/bcm47094-luxul-xwr-3150-v1.dts
index 4d5c5aa7dc42..1a6b9f56d67a 100644
--- a/arch/arm/boot/dts/bcm47094-luxul-xwr-3150-v1.dts
+++ b/arch/arm/boot/dts/bcm47094-luxul-xwr-3150-v1.dts
@@ -71,6 +71,10 @@ &usb3 {
vcc-gpio = <&chipcommon 18 GPIO_ACTIVE_HIGH>;
};
+&usb3_phy {
+ status = "okay";
+}
+
&spi_nor {
status = "okay";
};
--
2.27.0
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply related [flat|nested] 17+ messages in thread
* Re: [PATCH] ARM: dts: BCM5301X: Enable USB 3 PHY on Luxul XWR-3150
2020-11-13 9:50 ` Rafał Miłecki
(?)
@ 2020-11-13 13:41 ` kernel test robot
-1 siblings, 0 replies; 17+ messages in thread
From: kernel test robot @ 2020-11-13 13:41 UTC (permalink / raw)
To: Rafał Miłecki, Florian Fainelli
Cc: kbuild-all, Hauke Mehrtens, linux-arm-kernel, devicetree,
bcm-kernel-feedback-list, Rafał Miłecki
[-- Attachment #1: Type: text/plain, Size: 1691 bytes --]
Hi "Rafał,
I love your patch! Yet something to improve:
[auto build test ERROR on robh/for-next]
[also build test ERROR on v5.10-rc3 next-20201113]
[If your patch is applied to the wrong git tree, kindly drop us a note.
And when submitting patch, we suggest to use '--base' as documented in
https://git-scm.com/docs/git-format-patch]
url: https://github.com/0day-ci/linux/commits/Rafa-Mi-ecki/ARM-dts-BCM5301X-Enable-USB-3-PHY-on-Luxul-XWR-3150/20201113-175236
base: https://git.kernel.org/pub/scm/linux/kernel/git/robh/linux.git for-next
config: arm-randconfig-r036-20201113 (attached as .config)
compiler: arm-linux-gnueabi-gcc (GCC) 9.3.0
reproduce (this is a W=1 build):
wget https://raw.githubusercontent.com/intel/lkp-tests/master/sbin/make.cross -O ~/bin/make.cross
chmod +x ~/bin/make.cross
# https://github.com/0day-ci/linux/commit/1f7742592f638fdb90b7270d80d0c797e243ada7
git remote add linux-review https://github.com/0day-ci/linux
git fetch --no-tags linux-review Rafa-Mi-ecki/ARM-dts-BCM5301X-Enable-USB-3-PHY-on-Luxul-XWR-3150/20201113-175236
git checkout 1f7742592f638fdb90b7270d80d0c797e243ada7
# save the attached .config to linux build tree
COMPILER_INSTALL_PATH=$HOME/0day COMPILER=gcc-9.3.0 make.cross ARCH=arm
If you fix the issue, kindly add following tag as appropriate
Reported-by: kernel test robot <lkp@intel.com>
All errors (new ones prefixed by >>):
>> Error: arch/arm/boot/dts/bcm47094-luxul-xwr-3150-v1.dts:78.1-9 syntax error
FATAL ERROR: Unable to parse input tree
---
0-DAY CI Kernel Test Service, Intel Corporation
https://lists.01.org/hyperkitty/list/kbuild-all@lists.01.org
[-- Attachment #2: .config.gz --]
[-- Type: application/gzip, Size: 33513 bytes --]
^ permalink raw reply [flat|nested] 17+ messages in thread
* Re: [PATCH] ARM: dts: BCM5301X: Enable USB 3 PHY on Luxul XWR-3150
@ 2020-11-13 13:41 ` kernel test robot
0 siblings, 0 replies; 17+ messages in thread
From: kernel test robot @ 2020-11-13 13:41 UTC (permalink / raw)
To: Rafał Miłecki, Florian Fainelli
Cc: devicetree, kbuild-all, Hauke Mehrtens, bcm-kernel-feedback-list,
Rafał Miłecki, linux-arm-kernel
[-- Attachment #1: Type: text/plain, Size: 1691 bytes --]
Hi "Rafał,
I love your patch! Yet something to improve:
[auto build test ERROR on robh/for-next]
[also build test ERROR on v5.10-rc3 next-20201113]
[If your patch is applied to the wrong git tree, kindly drop us a note.
And when submitting patch, we suggest to use '--base' as documented in
https://git-scm.com/docs/git-format-patch]
url: https://github.com/0day-ci/linux/commits/Rafa-Mi-ecki/ARM-dts-BCM5301X-Enable-USB-3-PHY-on-Luxul-XWR-3150/20201113-175236
base: https://git.kernel.org/pub/scm/linux/kernel/git/robh/linux.git for-next
config: arm-randconfig-r036-20201113 (attached as .config)
compiler: arm-linux-gnueabi-gcc (GCC) 9.3.0
reproduce (this is a W=1 build):
wget https://raw.githubusercontent.com/intel/lkp-tests/master/sbin/make.cross -O ~/bin/make.cross
chmod +x ~/bin/make.cross
# https://github.com/0day-ci/linux/commit/1f7742592f638fdb90b7270d80d0c797e243ada7
git remote add linux-review https://github.com/0day-ci/linux
git fetch --no-tags linux-review Rafa-Mi-ecki/ARM-dts-BCM5301X-Enable-USB-3-PHY-on-Luxul-XWR-3150/20201113-175236
git checkout 1f7742592f638fdb90b7270d80d0c797e243ada7
# save the attached .config to linux build tree
COMPILER_INSTALL_PATH=$HOME/0day COMPILER=gcc-9.3.0 make.cross ARCH=arm
If you fix the issue, kindly add following tag as appropriate
Reported-by: kernel test robot <lkp@intel.com>
All errors (new ones prefixed by >>):
>> Error: arch/arm/boot/dts/bcm47094-luxul-xwr-3150-v1.dts:78.1-9 syntax error
FATAL ERROR: Unable to parse input tree
---
0-DAY CI Kernel Test Service, Intel Corporation
https://lists.01.org/hyperkitty/list/kbuild-all@lists.01.org
[-- Attachment #2: .config.gz --]
[-- Type: application/gzip, Size: 33513 bytes --]
[-- Attachment #3: Type: text/plain, Size: 176 bytes --]
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply [flat|nested] 17+ messages in thread
* Re: [PATCH] ARM: dts: BCM5301X: Enable USB 3 PHY on Luxul XWR-3150
@ 2020-11-13 13:41 ` kernel test robot
0 siblings, 0 replies; 17+ messages in thread
From: kernel test robot @ 2020-11-13 13:41 UTC (permalink / raw)
To: kbuild-all
[-- Attachment #1: Type: text/plain, Size: 1728 bytes --]
Hi "Rafał,
I love your patch! Yet something to improve:
[auto build test ERROR on robh/for-next]
[also build test ERROR on v5.10-rc3 next-20201113]
[If your patch is applied to the wrong git tree, kindly drop us a note.
And when submitting patch, we suggest to use '--base' as documented in
https://git-scm.com/docs/git-format-patch]
url: https://github.com/0day-ci/linux/commits/Rafa-Mi-ecki/ARM-dts-BCM5301X-Enable-USB-3-PHY-on-Luxul-XWR-3150/20201113-175236
base: https://git.kernel.org/pub/scm/linux/kernel/git/robh/linux.git for-next
config: arm-randconfig-r036-20201113 (attached as .config)
compiler: arm-linux-gnueabi-gcc (GCC) 9.3.0
reproduce (this is a W=1 build):
wget https://raw.githubusercontent.com/intel/lkp-tests/master/sbin/make.cross -O ~/bin/make.cross
chmod +x ~/bin/make.cross
# https://github.com/0day-ci/linux/commit/1f7742592f638fdb90b7270d80d0c797e243ada7
git remote add linux-review https://github.com/0day-ci/linux
git fetch --no-tags linux-review Rafa-Mi-ecki/ARM-dts-BCM5301X-Enable-USB-3-PHY-on-Luxul-XWR-3150/20201113-175236
git checkout 1f7742592f638fdb90b7270d80d0c797e243ada7
# save the attached .config to linux build tree
COMPILER_INSTALL_PATH=$HOME/0day COMPILER=gcc-9.3.0 make.cross ARCH=arm
If you fix the issue, kindly add following tag as appropriate
Reported-by: kernel test robot <lkp@intel.com>
All errors (new ones prefixed by >>):
>> Error: arch/arm/boot/dts/bcm47094-luxul-xwr-3150-v1.dts:78.1-9 syntax error
FATAL ERROR: Unable to parse input tree
---
0-DAY CI Kernel Test Service, Intel Corporation
https://lists.01.org/hyperkitty/list/kbuild-all(a)lists.01.org
[-- Attachment #2: config.gz --]
[-- Type: application/gzip, Size: 33513 bytes --]
^ permalink raw reply [flat|nested] 17+ messages in thread
* Re: [PATCH] ARM: dts: BCM5301X: Enable USB 3 PHY on Luxul XWR-3150
2020-11-13 13:41 ` kernel test robot
(?)
@ 2020-11-13 13:51 ` Rafał Miłecki
-1 siblings, 0 replies; 17+ messages in thread
From: Rafał Miłecki @ 2020-11-13 13:51 UTC (permalink / raw)
To: kernel test robot
Cc: Rafał Miłecki, Florian Fainelli, kbuild-all,
Hauke Mehrtens, linux-arm-kernel, devicetree,
bcm-kernel-feedback-list
Hey,
On 2020-11-13 14:41, kernel test robot wrote:
> [auto build test ERROR on robh/for-next]
> [also build test ERROR on v5.10-rc3 next-20201113]
> [If your patch is applied to the wrong git tree, kindly drop us a note.
> And when submitting patch, we suggest to use '--base' as documented in
> https://git-scm.com/docs/git-format-patch]
>
> url:
> https://github.com/0day-ci/linux/commits/Rafa-Mi-ecki/ARM-dts-BCM5301X-Enable-USB-3-PHY-on-Luxul-XWR-3150/20201113-175236
> base: https://git.kernel.org/pub/scm/linux/kernel/git/robh/linux.git
> for-next
> config: arm-randconfig-r036-20201113 (attached as .config)
> compiler: arm-linux-gnueabi-gcc (GCC) 9.3.0
> reproduce (this is a W=1 build):
> wget
> https://raw.githubusercontent.com/intel/lkp-tests/master/sbin/make.cross
> -O ~/bin/make.cross
> chmod +x ~/bin/make.cross
> #
> https://github.com/0day-ci/linux/commit/1f7742592f638fdb90b7270d80d0c797e243ada7
> git remote add linux-review https://github.com/0day-ci/linux
> git fetch --no-tags linux-review
> Rafa-Mi-ecki/ARM-dts-BCM5301X-Enable-USB-3-PHY-on-Luxul-XWR-3150/20201113-175236
> git checkout 1f7742592f638fdb90b7270d80d0c797e243ada7
> # save the attached .config to linux build tree
> COMPILER_INSTALL_PATH=$HOME/0day COMPILER=gcc-9.3.0 make.cross
> ARCH=arm
>
> If you fix the issue, kindly add following tag as appropriate
> Reported-by: kernel test robot <lkp@intel.com>
>
> All errors (new ones prefixed by >>):
>
>>> Error: arch/arm/boot/dts/bcm47094-luxul-xwr-3150-v1.dts:78.1-9 syntax
>>> error
> FATAL ERROR: Unable to parse input tree
Is there a problem with bot or GitHub? I can't access any:
https://github.com/0day-ci/linux/commits/Rafa-Mi-ecki/ARM-dts-BCM5301X-Enable-USB-3-PHY-on-Luxul-XWR-3150/20201113-175236
https://github.com/0day-ci/linux/commit/1f7742592f638fdb90b7270d80d0c797e243ada7
^ permalink raw reply [flat|nested] 17+ messages in thread
* Re: [PATCH] ARM: dts: BCM5301X: Enable USB 3 PHY on Luxul XWR-3150
@ 2020-11-13 13:51 ` Rafał Miłecki
0 siblings, 0 replies; 17+ messages in thread
From: Rafał Miłecki @ 2020-11-13 13:51 UTC (permalink / raw)
To: kernel test robot
Cc: devicetree, Florian Fainelli, kbuild-all, Hauke Mehrtens,
Rafał Miłecki, bcm-kernel-feedback-list,
linux-arm-kernel
Hey,
On 2020-11-13 14:41, kernel test robot wrote:
> [auto build test ERROR on robh/for-next]
> [also build test ERROR on v5.10-rc3 next-20201113]
> [If your patch is applied to the wrong git tree, kindly drop us a note.
> And when submitting patch, we suggest to use '--base' as documented in
> https://git-scm.com/docs/git-format-patch]
>
> url:
> https://github.com/0day-ci/linux/commits/Rafa-Mi-ecki/ARM-dts-BCM5301X-Enable-USB-3-PHY-on-Luxul-XWR-3150/20201113-175236
> base: https://git.kernel.org/pub/scm/linux/kernel/git/robh/linux.git
> for-next
> config: arm-randconfig-r036-20201113 (attached as .config)
> compiler: arm-linux-gnueabi-gcc (GCC) 9.3.0
> reproduce (this is a W=1 build):
> wget
> https://raw.githubusercontent.com/intel/lkp-tests/master/sbin/make.cross
> -O ~/bin/make.cross
> chmod +x ~/bin/make.cross
> #
> https://github.com/0day-ci/linux/commit/1f7742592f638fdb90b7270d80d0c797e243ada7
> git remote add linux-review https://github.com/0day-ci/linux
> git fetch --no-tags linux-review
> Rafa-Mi-ecki/ARM-dts-BCM5301X-Enable-USB-3-PHY-on-Luxul-XWR-3150/20201113-175236
> git checkout 1f7742592f638fdb90b7270d80d0c797e243ada7
> # save the attached .config to linux build tree
> COMPILER_INSTALL_PATH=$HOME/0day COMPILER=gcc-9.3.0 make.cross
> ARCH=arm
>
> If you fix the issue, kindly add following tag as appropriate
> Reported-by: kernel test robot <lkp@intel.com>
>
> All errors (new ones prefixed by >>):
>
>>> Error: arch/arm/boot/dts/bcm47094-luxul-xwr-3150-v1.dts:78.1-9 syntax
>>> error
> FATAL ERROR: Unable to parse input tree
Is there a problem with bot or GitHub? I can't access any:
https://github.com/0day-ci/linux/commits/Rafa-Mi-ecki/ARM-dts-BCM5301X-Enable-USB-3-PHY-on-Luxul-XWR-3150/20201113-175236
https://github.com/0day-ci/linux/commit/1f7742592f638fdb90b7270d80d0c797e243ada7
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply [flat|nested] 17+ messages in thread
* Re: [PATCH] ARM: dts: BCM5301X: Enable USB 3 PHY on Luxul XWR-3150
@ 2020-11-13 13:51 ` Rafał Miłecki
0 siblings, 0 replies; 17+ messages in thread
From: Rafał Miłecki @ 2020-11-13 13:51 UTC (permalink / raw)
To: kbuild-all
[-- Attachment #1: Type: text/plain, Size: 1945 bytes --]
Hey,
On 2020-11-13 14:41, kernel test robot wrote:
> [auto build test ERROR on robh/for-next]
> [also build test ERROR on v5.10-rc3 next-20201113]
> [If your patch is applied to the wrong git tree, kindly drop us a note.
> And when submitting patch, we suggest to use '--base' as documented in
> https://git-scm.com/docs/git-format-patch]
>
> url:
> https://github.com/0day-ci/linux/commits/Rafa-Mi-ecki/ARM-dts-BCM5301X-Enable-USB-3-PHY-on-Luxul-XWR-3150/20201113-175236
> base: https://git.kernel.org/pub/scm/linux/kernel/git/robh/linux.git
> for-next
> config: arm-randconfig-r036-20201113 (attached as .config)
> compiler: arm-linux-gnueabi-gcc (GCC) 9.3.0
> reproduce (this is a W=1 build):
> wget
> https://raw.githubusercontent.com/intel/lkp-tests/master/sbin/make.cross
> -O ~/bin/make.cross
> chmod +x ~/bin/make.cross
> #
> https://github.com/0day-ci/linux/commit/1f7742592f638fdb90b7270d80d0c797e243ada7
> git remote add linux-review https://github.com/0day-ci/linux
> git fetch --no-tags linux-review
> Rafa-Mi-ecki/ARM-dts-BCM5301X-Enable-USB-3-PHY-on-Luxul-XWR-3150/20201113-175236
> git checkout 1f7742592f638fdb90b7270d80d0c797e243ada7
> # save the attached .config to linux build tree
> COMPILER_INSTALL_PATH=$HOME/0day COMPILER=gcc-9.3.0 make.cross
> ARCH=arm
>
> If you fix the issue, kindly add following tag as appropriate
> Reported-by: kernel test robot <lkp@intel.com>
>
> All errors (new ones prefixed by >>):
>
>>> Error: arch/arm/boot/dts/bcm47094-luxul-xwr-3150-v1.dts:78.1-9 syntax
>>> error
> FATAL ERROR: Unable to parse input tree
Is there a problem with bot or GitHub? I can't access any:
https://github.com/0day-ci/linux/commits/Rafa-Mi-ecki/ARM-dts-BCM5301X-Enable-USB-3-PHY-on-Luxul-XWR-3150/20201113-175236
https://github.com/0day-ci/linux/commit/1f7742592f638fdb90b7270d80d0c797e243ada7
^ permalink raw reply [flat|nested] 17+ messages in thread
* Re: [PATCH] ARM: dts: BCM5301X: Enable USB 3 PHY on Luxul XWR-3150
2020-11-13 9:50 ` Rafał Miłecki
@ 2020-11-13 23:12 ` Florian Fainelli
-1 siblings, 0 replies; 17+ messages in thread
From: Florian Fainelli @ 2020-11-13 23:12 UTC (permalink / raw)
To: bcm-kernel-feedback-list, Rafał Miłecki
Cc: Hauke Mehrtens, linux-arm-kernel, devicetree, Rafał Miłecki
On Fri, 13 Nov 2020 10:50:12 +0100, Rafał Miłecki <zajec5@gmail.com> wrote:
> From: Rafał Miłecki <rafal@milecki.pl>
>
> This device has a functional USB 3 port so PHY is required.
>
> Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
> ---
Applied to devicetree/next, thanks!
--
Florian
^ permalink raw reply [flat|nested] 17+ messages in thread
* Re: [PATCH] ARM: dts: BCM5301X: Enable USB 3 PHY on Luxul XWR-3150
@ 2020-11-13 23:12 ` Florian Fainelli
0 siblings, 0 replies; 17+ messages in thread
From: Florian Fainelli @ 2020-11-13 23:12 UTC (permalink / raw)
To: bcm-kernel-feedback-list, Rafał Miłecki
Cc: Rafał Miłecki, Hauke Mehrtens, linux-arm-kernel, devicetree
On Fri, 13 Nov 2020 10:50:12 +0100, Rafał Miłecki <zajec5@gmail.com> wrote:
> From: Rafał Miłecki <rafal@milecki.pl>
>
> This device has a functional USB 3 port so PHY is required.
>
> Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
> ---
Applied to devicetree/next, thanks!
--
Florian
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply [flat|nested] 17+ messages in thread
* Re: [PATCH] ARM: dts: BCM5301X: Enable USB 3 PHY on Luxul XWR-3150
2020-11-13 23:12 ` Florian Fainelli
@ 2020-11-13 23:17 ` Florian Fainelli
-1 siblings, 0 replies; 17+ messages in thread
From: Florian Fainelli @ 2020-11-13 23:17 UTC (permalink / raw)
To: bcm-kernel-feedback-list, Rafał Miłecki
Cc: Hauke Mehrtens, linux-arm-kernel, devicetree, Rafał Miłecki
On 11/13/20 3:12 PM, Florian Fainelli wrote:
> On Fri, 13 Nov 2020 10:50:12 +0100, Rafał Miłecki <zajec5@gmail.com> wrote:
>> From: Rafał Miłecki <rafal@milecki.pl>
>>
>> This device has a functional USB 3 port so PHY is required.
>>
>> Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
>> ---
>
> Applied to devicetree/next, thanks!
After fixing it up so it builds:
diff --git a/arch/arm/boot/dts/bcm47094-luxul-xwr-3150-v1.dts
b/arch/arm/boot/dts/bcm47094-luxul-xwr-3150-v1.dts
index 1a6b9f56d67a..a361aa8627d3 100644
--- a/arch/arm/boot/dts/bcm47094-luxul-xwr-3150-v1.dts
+++ b/arch/arm/boot/dts/bcm47094-luxul-xwr-3150-v1.dts
@@ -73,7 +73,7 @@ &usb3 {
&usb3_phy {
status = "okay";
-}
+};
&spi_nor {
status = "okay";
--
Florian
^ permalink raw reply related [flat|nested] 17+ messages in thread
* Re: [PATCH] ARM: dts: BCM5301X: Enable USB 3 PHY on Luxul XWR-3150
@ 2020-11-13 23:17 ` Florian Fainelli
0 siblings, 0 replies; 17+ messages in thread
From: Florian Fainelli @ 2020-11-13 23:17 UTC (permalink / raw)
To: bcm-kernel-feedback-list, Rafał Miłecki
Cc: Rafał Miłecki, Hauke Mehrtens, linux-arm-kernel, devicetree
On 11/13/20 3:12 PM, Florian Fainelli wrote:
> On Fri, 13 Nov 2020 10:50:12 +0100, Rafał Miłecki <zajec5@gmail.com> wrote:
>> From: Rafał Miłecki <rafal@milecki.pl>
>>
>> This device has a functional USB 3 port so PHY is required.
>>
>> Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
>> ---
>
> Applied to devicetree/next, thanks!
After fixing it up so it builds:
diff --git a/arch/arm/boot/dts/bcm47094-luxul-xwr-3150-v1.dts
b/arch/arm/boot/dts/bcm47094-luxul-xwr-3150-v1.dts
index 1a6b9f56d67a..a361aa8627d3 100644
--- a/arch/arm/boot/dts/bcm47094-luxul-xwr-3150-v1.dts
+++ b/arch/arm/boot/dts/bcm47094-luxul-xwr-3150-v1.dts
@@ -73,7 +73,7 @@ &usb3 {
&usb3_phy {
status = "okay";
-}
+};
&spi_nor {
status = "okay";
--
Florian
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply related [flat|nested] 17+ messages in thread
* Re: [PATCH] ARM: dts: BCM5301X: Enable USB 3 PHY on Luxul XWR-3150
2020-11-13 23:17 ` Florian Fainelli
@ 2020-11-13 23:18 ` Rafał Miłecki
-1 siblings, 0 replies; 17+ messages in thread
From: Rafał Miłecki @ 2020-11-13 23:18 UTC (permalink / raw)
To: Florian Fainelli
Cc: bcm-kernel-feedback-list, Hauke Mehrtens, linux-arm-kernel,
open list:OPEN FIRMWARE AND FLATTENED DEVICE TREE BINDINGS,
Rafał Miłecki
On Sat, 14 Nov 2020 at 00:17, Florian Fainelli <f.fainelli@gmail.com> wrote:
> On 11/13/20 3:12 PM, Florian Fainelli wrote:
> > On Fri, 13 Nov 2020 10:50:12 +0100, Rafał Miłecki <zajec5@gmail.com> wrote:
> >> From: Rafał Miłecki <rafal@milecki.pl>
> >>
> >> This device has a functional USB 3 port so PHY is required.
> >>
> >> Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
> >> ---
> >
> > Applied to devicetree/next, thanks!
>
>
> After fixing it up so it builds:
Oops. Sorry and thanks!
^ permalink raw reply [flat|nested] 17+ messages in thread
* Re: [PATCH] ARM: dts: BCM5301X: Enable USB 3 PHY on Luxul XWR-3150
@ 2020-11-13 23:18 ` Rafał Miłecki
0 siblings, 0 replies; 17+ messages in thread
From: Rafał Miłecki @ 2020-11-13 23:18 UTC (permalink / raw)
To: Florian Fainelli
Cc: Rafał Miłecki, Hauke Mehrtens,
bcm-kernel-feedback-list, linux-arm-kernel,
open list:OPEN FIRMWARE AND FLATTENED DEVICE TREE BINDINGS
On Sat, 14 Nov 2020 at 00:17, Florian Fainelli <f.fainelli@gmail.com> wrote:
> On 11/13/20 3:12 PM, Florian Fainelli wrote:
> > On Fri, 13 Nov 2020 10:50:12 +0100, Rafał Miłecki <zajec5@gmail.com> wrote:
> >> From: Rafał Miłecki <rafal@milecki.pl>
> >>
> >> This device has a functional USB 3 port so PHY is required.
> >>
> >> Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
> >> ---
> >
> > Applied to devicetree/next, thanks!
>
>
> After fixing it up so it builds:
Oops. Sorry and thanks!
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply [flat|nested] 17+ messages in thread
* Re: [kbuild-all] Re: [PATCH] ARM: dts: BCM5301X: Enable USB 3 PHY on Luxul XWR-3150
2020-11-13 13:51 ` Rafał Miłecki
(?)
@ 2020-11-16 6:14 ` Rong Chen
-1 siblings, 0 replies; 17+ messages in thread
From: Rong Chen @ 2020-11-16 6:14 UTC (permalink / raw)
To: Rafał Miłecki, kernel test robot
Cc: Rafał Miłecki, Florian Fainelli, kbuild-all,
Hauke Mehrtens, linux-arm-kernel, devicetree,
bcm-kernel-feedback-list
On 11/13/20 9:51 PM, Rafał Miłecki wrote:
> Hey,
>
> On 2020-11-13 14:41, kernel test robot wrote:
>> [auto build test ERROR on robh/for-next]
>> [also build test ERROR on v5.10-rc3 next-20201113]
>> [If your patch is applied to the wrong git tree, kindly drop us a note.
>> And when submitting patch, we suggest to use '--base' as documented in
>> https://git-scm.com/docs/git-format-patch]
>>
>> url:
>> https://github.com/0day-ci/linux/commits/Rafa-Mi-ecki/ARM-dts-BCM5301X-Enable-USB-3-PHY-on-Luxul-XWR-3150/20201113-175236
>>
>> base: https://git.kernel.org/pub/scm/linux/kernel/git/robh/linux.git
>> for-next
>> config: arm-randconfig-r036-20201113 (attached as .config)
>> compiler: arm-linux-gnueabi-gcc (GCC) 9.3.0
>> reproduce (this is a W=1 build):
>> wget
>> https://raw.githubusercontent.com/intel/lkp-tests/master/sbin/make.cross
>> -O ~/bin/make.cross
>> chmod +x ~/bin/make.cross
>> #
>> https://github.com/0day-ci/linux/commit/1f7742592f638fdb90b7270d80d0c797e243ada7
>>
>> git remote add linux-review https://github.com/0day-ci/linux
>> git fetch --no-tags linux-review
>> Rafa-Mi-ecki/ARM-dts-BCM5301X-Enable-USB-3-PHY-on-Luxul-XWR-3150/20201113-175236
>>
>> git checkout 1f7742592f638fdb90b7270d80d0c797e243ada7
>> # save the attached .config to linux build tree
>> COMPILER_INSTALL_PATH=$HOME/0day COMPILER=gcc-9.3.0
>> make.cross ARCH=arm
>>
>> If you fix the issue, kindly add following tag as appropriate
>> Reported-by: kernel test robot <lkp@intel.com>
>>
>> All errors (new ones prefixed by >>):
>>
>>>> Error: arch/arm/boot/dts/bcm47094-luxul-xwr-3150-v1.dts:78.1-9
>>>> syntax error
>> FATAL ERROR: Unable to parse input tree
>
> Is there a problem with bot or GitHub? I can't access any:
>
> https://github.com/0day-ci/linux/commits/Rafa-Mi-ecki/ARM-dts-BCM5301X-Enable-USB-3-PHY-on-Luxul-XWR-3150/20201113-175236
>
> https://github.com/0day-ci/linux/commit/1f7742592f638fdb90b7270d80d0c797e243ada7
>
>
Hi Rafał ,
The git push service was busy at that time and the branch
has been uploaded to github at 2020-11-14 03:22:56 +0800.
Best Regards,
Rong Chen
^ permalink raw reply [flat|nested] 17+ messages in thread
* Re: [kbuild-all] Re: [PATCH] ARM: dts: BCM5301X: Enable USB 3 PHY on Luxul XWR-3150
@ 2020-11-16 6:14 ` Rong Chen
0 siblings, 0 replies; 17+ messages in thread
From: Rong Chen @ 2020-11-16 6:14 UTC (permalink / raw)
To: Rafał Miłecki, kernel test robot
Cc: devicetree, Florian Fainelli, kbuild-all, Hauke Mehrtens,
Rafał Miłecki, bcm-kernel-feedback-list,
linux-arm-kernel
On 11/13/20 9:51 PM, Rafał Miłecki wrote:
> Hey,
>
> On 2020-11-13 14:41, kernel test robot wrote:
>> [auto build test ERROR on robh/for-next]
>> [also build test ERROR on v5.10-rc3 next-20201113]
>> [If your patch is applied to the wrong git tree, kindly drop us a note.
>> And when submitting patch, we suggest to use '--base' as documented in
>> https://git-scm.com/docs/git-format-patch]
>>
>> url:
>> https://github.com/0day-ci/linux/commits/Rafa-Mi-ecki/ARM-dts-BCM5301X-Enable-USB-3-PHY-on-Luxul-XWR-3150/20201113-175236
>>
>> base: https://git.kernel.org/pub/scm/linux/kernel/git/robh/linux.git
>> for-next
>> config: arm-randconfig-r036-20201113 (attached as .config)
>> compiler: arm-linux-gnueabi-gcc (GCC) 9.3.0
>> reproduce (this is a W=1 build):
>> wget
>> https://raw.githubusercontent.com/intel/lkp-tests/master/sbin/make.cross
>> -O ~/bin/make.cross
>> chmod +x ~/bin/make.cross
>> #
>> https://github.com/0day-ci/linux/commit/1f7742592f638fdb90b7270d80d0c797e243ada7
>>
>> git remote add linux-review https://github.com/0day-ci/linux
>> git fetch --no-tags linux-review
>> Rafa-Mi-ecki/ARM-dts-BCM5301X-Enable-USB-3-PHY-on-Luxul-XWR-3150/20201113-175236
>>
>> git checkout 1f7742592f638fdb90b7270d80d0c797e243ada7
>> # save the attached .config to linux build tree
>> COMPILER_INSTALL_PATH=$HOME/0day COMPILER=gcc-9.3.0
>> make.cross ARCH=arm
>>
>> If you fix the issue, kindly add following tag as appropriate
>> Reported-by: kernel test robot <lkp@intel.com>
>>
>> All errors (new ones prefixed by >>):
>>
>>>> Error: arch/arm/boot/dts/bcm47094-luxul-xwr-3150-v1.dts:78.1-9
>>>> syntax error
>> FATAL ERROR: Unable to parse input tree
>
> Is there a problem with bot or GitHub? I can't access any:
>
> https://github.com/0day-ci/linux/commits/Rafa-Mi-ecki/ARM-dts-BCM5301X-Enable-USB-3-PHY-on-Luxul-XWR-3150/20201113-175236
>
> https://github.com/0day-ci/linux/commit/1f7742592f638fdb90b7270d80d0c797e243ada7
>
>
Hi Rafał ,
The git push service was busy at that time and the branch
has been uploaded to github at 2020-11-14 03:22:56 +0800.
Best Regards,
Rong Chen
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply [flat|nested] 17+ messages in thread
* Re: [PATCH] ARM: dts: BCM5301X: Enable USB 3 PHY on Luxul XWR-3150
@ 2020-11-16 6:14 ` Rong Chen
0 siblings, 0 replies; 17+ messages in thread
From: Rong Chen @ 2020-11-16 6:14 UTC (permalink / raw)
To: kbuild-all
[-- Attachment #1: Type: text/plain, Size: 2283 bytes --]
On 11/13/20 9:51 PM, Rafał Miłecki wrote:
> Hey,
>
> On 2020-11-13 14:41, kernel test robot wrote:
>> [auto build test ERROR on robh/for-next]
>> [also build test ERROR on v5.10-rc3 next-20201113]
>> [If your patch is applied to the wrong git tree, kindly drop us a note.
>> And when submitting patch, we suggest to use '--base' as documented in
>> https://git-scm.com/docs/git-format-patch]
>>
>> url:
>> https://github.com/0day-ci/linux/commits/Rafa-Mi-ecki/ARM-dts-BCM5301X-Enable-USB-3-PHY-on-Luxul-XWR-3150/20201113-175236
>>
>> base: https://git.kernel.org/pub/scm/linux/kernel/git/robh/linux.git
>> for-next
>> config: arm-randconfig-r036-20201113 (attached as .config)
>> compiler: arm-linux-gnueabi-gcc (GCC) 9.3.0
>> reproduce (this is a W=1 build):
>> wget
>> https://raw.githubusercontent.com/intel/lkp-tests/master/sbin/make.cross
>> -O ~/bin/make.cross
>> chmod +x ~/bin/make.cross
>> #
>> https://github.com/0day-ci/linux/commit/1f7742592f638fdb90b7270d80d0c797e243ada7
>>
>> git remote add linux-review https://github.com/0day-ci/linux
>> git fetch --no-tags linux-review
>> Rafa-Mi-ecki/ARM-dts-BCM5301X-Enable-USB-3-PHY-on-Luxul-XWR-3150/20201113-175236
>>
>> git checkout 1f7742592f638fdb90b7270d80d0c797e243ada7
>> # save the attached .config to linux build tree
>> COMPILER_INSTALL_PATH=$HOME/0day COMPILER=gcc-9.3.0
>> make.cross ARCH=arm
>>
>> If you fix the issue, kindly add following tag as appropriate
>> Reported-by: kernel test robot <lkp@intel.com>
>>
>> All errors (new ones prefixed by >>):
>>
>>>> Error: arch/arm/boot/dts/bcm47094-luxul-xwr-3150-v1.dts:78.1-9
>>>> syntax error
>> FATAL ERROR: Unable to parse input tree
>
> Is there a problem with bot or GitHub? I can't access any:
>
> https://github.com/0day-ci/linux/commits/Rafa-Mi-ecki/ARM-dts-BCM5301X-Enable-USB-3-PHY-on-Luxul-XWR-3150/20201113-175236
>
> https://github.com/0day-ci/linux/commit/1f7742592f638fdb90b7270d80d0c797e243ada7
>
>
Hi Rafał ,
The git push service was busy at that time and the branch
has been uploaded to github at 2020-11-14 03:22:56 +0800.
Best Regards,
Rong Chen
^ permalink raw reply [flat|nested] 17+ messages in thread
end of thread, other threads:[~2020-11-16 6:16 UTC | newest]
Thread overview: 17+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2020-11-13 9:50 [PATCH] ARM: dts: BCM5301X: Enable USB 3 PHY on Luxul XWR-3150 Rafał Miłecki
2020-11-13 9:50 ` Rafał Miłecki
2020-11-13 13:41 ` kernel test robot
2020-11-13 13:41 ` kernel test robot
2020-11-13 13:41 ` kernel test robot
2020-11-13 13:51 ` Rafał Miłecki
2020-11-13 13:51 ` Rafał Miłecki
2020-11-13 13:51 ` Rafał Miłecki
2020-11-16 6:14 ` [kbuild-all] " Rong Chen
2020-11-16 6:14 ` Rong Chen
2020-11-16 6:14 ` [kbuild-all] " Rong Chen
2020-11-13 23:12 ` Florian Fainelli
2020-11-13 23:12 ` Florian Fainelli
2020-11-13 23:17 ` Florian Fainelli
2020-11-13 23:17 ` Florian Fainelli
2020-11-13 23:18 ` Rafał Miłecki
2020-11-13 23:18 ` Rafał Miłecki
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.