From: Joerg Vehlow <lkml@jv-coder.de>
To: ltp@lists.linux.it
Subject: [LTP] [PATCH v2 1/3] network/stress/multicast/packet-flood: Update to new API
Date: Tue, 17 Nov 2020 13:43:18 +0100 [thread overview]
Message-ID: <20201117124320.783802-1-lkml@jv-coder.de> (raw)
From: Joerg Vehlow <joerg.vehlow@aox-tech.de>
Signed-off-by: Joerg Vehlow <joerg.vehlow@aox-tech.de>
---
runtest/net_stress.multicast | 4 +
.../multicast/packet-flood/mcast-pktfld01.sh | 43 ++++
.../multicast/packet-flood/mcast-pktfld02.sh | 60 +++++
.../multicast/packet-flood/mcast4-pktfld01 | 207 ----------------
.../multicast/packet-flood/mcast4-pktfld02 | 225 ------------------
.../multicast/packet-flood/mcast6-pktfld01 | 203 ----------------
.../multicast/packet-flood/mcast6-pktfld02 | 220 -----------------
7 files changed, 107 insertions(+), 855 deletions(-)
create mode 100755 testcases/network/stress/multicast/packet-flood/mcast-pktfld01.sh
create mode 100755 testcases/network/stress/multicast/packet-flood/mcast-pktfld02.sh
delete mode 100644 testcases/network/stress/multicast/packet-flood/mcast4-pktfld01
delete mode 100644 testcases/network/stress/multicast/packet-flood/mcast4-pktfld02
delete mode 100644 testcases/network/stress/multicast/packet-flood/mcast6-pktfld01
delete mode 100644 testcases/network/stress/multicast/packet-flood/mcast6-pktfld02
diff --git a/runtest/net_stress.multicast b/runtest/net_stress.multicast
index 463fe17ab..fff5133f6 100644
--- a/runtest/net_stress.multicast
+++ b/runtest/net_stress.multicast
@@ -6,8 +6,12 @@ mcast4-group-single-socket mcast-group-single-socket
mcast4-group-multiple-socket mcast-group-multiple-socket
mcast4-group-same-group mcast-group-same-group
mcast4-group-source-filter mcast-group-source-filter
+mcast4-pktfld01 mcast-pktfld01.sh
+mcast4-pktfld02 mcast-pktfld02.sh
mcast6-group-single-socket mcast-group-single-socket -6
mcast6-group-multiple-socket mcast-group-multiple-socket -6
mcast6-group-same-group mcast-group-same-group -6
mcast6-group-source-filter mcast-group-source-filter -6
+mcast6-pktfld01 mcast-pktfld01.sh -6
+mcast6-pktfld02 mcast-pktfld02.sh -6
diff --git a/testcases/network/stress/multicast/packet-flood/mcast-pktfld01.sh b/testcases/network/stress/multicast/packet-flood/mcast-pktfld01.sh
new file mode 100755
index 000000000..37e9b1004
--- /dev/null
+++ b/testcases/network/stress/multicast/packet-flood/mcast-pktfld01.sh
@@ -0,0 +1,43 @@
+#!/bin/sh
+# SPDX-License-Identifier: GPL-2.0-or-later
+# Copyright (c) 2006 International Business Machines Corp.
+# Copyright (c) 2020 Joerg Vehlow <joerg.vehlow@aox-tech.de>
+# Author: Mitsuru Chinen <mitch@jp.ibm.com>
+#
+# Verify that the kernel is not crashed when joining a multicast group with
+# a single socket, then receiving a large number of UDP packets at the socket
+
+TST_NEEDS_ROOT=1
+. mcast-lib.sh
+
+do_setup()
+{
+ mcast_setup $MCASTNUM_NORMAL
+ MCAST_LCMD=ns-mcast_receiver
+ MCAST_RCMD=ns-udpsender
+}
+
+do_test()
+{
+ local mcast_addr="$MCAST_IPV4_ADDR"
+ [ "$TST_IPV6" ] && mcast_addr="$MCAST_IPV6_ADDR"
+
+ # Find the available consecutive ports
+ local mcast_port=$(find_portbundle udp 1025 1)
+ if [ $? -ne 0 ]; then
+ tst_brk TBROK "No free udp port available."
+ fi
+
+ # Run a receiver
+ ns-mcast_receiver -f $TST_IPVER -I $(tst_iface lhost) -m $mcast_addr -p $mcast_port -b
+ if [ $? -ne 0 ]; then
+ tst_brk TBROK "Failed to start multicast receiver"
+ fi
+
+ # Run a sender
+ tst_rhost_run -s -c "ns-udpsender -D $mcast_addr -f $TST_IPVER -p $mcast_port -s 32767 -m -I $(tst_iface rhost) -t $NS_DURATION"
+
+ tst_res TPASS "Test finished successfully."
+}
+
+tst_run
diff --git a/testcases/network/stress/multicast/packet-flood/mcast-pktfld02.sh b/testcases/network/stress/multicast/packet-flood/mcast-pktfld02.sh
new file mode 100755
index 000000000..4ffde186b
--- /dev/null
+++ b/testcases/network/stress/multicast/packet-flood/mcast-pktfld02.sh
@@ -0,0 +1,60 @@
+#!/bin/sh
+# SPDX-License-Identifier: GPL-2.0-or-later
+# Copyright (c) 2006 International Business Machines Corp.
+# Copyright (c) 2020 Joerg Vehlow <joerg.vehlow@aox-tech.de>
+# Author: Mitsuru Chinen <mitch@jp.ibm.com>
+#
+# Verify that the kernel is not crashed when joining multiple multicast
+# groups on separate sockets, then receiving a large number of UDP
+# packets at each socket
+
+TST_NEEDS_ROOT=1
+. mcast-lib.sh
+
+do_setup()
+{
+ mcast_setup $MCASTNUM_NORMAL
+ MCAST_LCMD=ns-mcast_receiver
+ MCAST_RCMD=ns-udpsender
+}
+
+do_test()
+{
+ local mcast_port_range=$(find_portbundle udp 1025 $MCASTNUM_NORMAL)
+ if [ $? -ne 0 ]; then
+ tst_brk TBROK "Failed to find enough consecutive free udp ports."
+ fi
+ local mcast_port_top=$(echo $mcast_port_range | cut -f 1 -d '-')
+
+ local mcastnum=0
+ while [ $mcastnum -lt $MCASTNUM_NORMAL ]; do
+ local mcast_port=$((mcast_port_top + mcastnum))
+
+ # Define the multicast address
+ if [ "$TST_IPV6" ]; then
+ local mcastnum_hex=$(printf "%x" $mcastnum)
+ local mcast_addr=${MCAST_IPV6_ADDR_PREFIX}:${mcastnum_hex}
+ else
+ local x=$((mcastnum / 254))
+ local y=$((mcastnum % 254 + 1))
+ local mcast_addr=${MCAST_IPV4_ADDR_PREFIX}.${x}.${y}
+ fi
+
+ # Run a receiver
+ ns-mcast_receiver -f $TST_IPVER -I $(tst_iface lhost) -m $mcast_addr -p $mcast_port -b
+ if [ $? -ne 0 ]; then
+ tst_brk TBROK "Failed to start multicast receiver"
+ fi
+
+ # Run a sender
+ tst_rhost_run -s -c "ns-udpsender -D $mcast_addr -f $TST_IPVER -p $mcast_port -m -I $(tst_iface rhost) -b -t $NS_DURATION"
+
+ : $((mcastnum += 1))
+ done
+
+ sleep $NS_DURATION
+
+ tst_res TPASS "Test finished successfully."
+}
+
+tst_run
diff --git a/testcases/network/stress/multicast/packet-flood/mcast4-pktfld01 b/testcases/network/stress/multicast/packet-flood/mcast4-pktfld01
deleted file mode 100644
index c1ee513d4..000000000
--- a/testcases/network/stress/multicast/packet-flood/mcast4-pktfld01
+++ /dev/null
@@ -1,207 +0,0 @@
-#!/bin/sh
-
-################################################################################
-## ##
-## Copyright (c) International Business Machines Corp., 2006 ##
-## ##
-## This program is free software; you can redistribute it and#or modify ##
-## it under the terms of the GNU General Public License as published by ##
-## the Free Software Foundation; either version 2 of the License, or ##
-## (at your option) any later version. ##
-## ##
-## This program is distributed in the hope that it will be useful, but ##
-## WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY ##
-## or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License ##
-## for more details. ##
-## ##
-## You should have received a copy of the GNU General Public License ##
-## along with this program; if not, write to the Free Software ##
-## Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA ##
-## ##
-## ##
-################################################################################
-#
-# File:
-# mcast4-pktfld01
-#
-# Description:
-# Verify that the kernel is not crashed when joining a IPv4 multicast group
-# a single socket, then receiving a large number of UDP packets at the socket
-#
-# Setup:
-# See testcases/network/stress/README
-#
-# Author:
-# Mitsuru Chinen <mitch@jp.ibm.com>
-#
-# History:
-# May 1 2006 - Created (Mitsuru Chinen)
-#
-#-----------------------------------------------------------------------
-# Uncomment line below for debug output.
-#trace_logic=${trace_logic:-"set -x"}
-$trace_logic
-
-# The test case ID, the test case count and the total number of test case
-TCID=mcast4-pktfld01
-TST_TOTAL=1
-TST_COUNT=1
-export TCID
-export TST_COUNT
-export TST_TOTAL
-
-# Make sure the value of LTPROOT
-LTPROOT=${LTPROOT:-`(cd ../../../../.. ; pwd)`}
-export LTPROOT
-
-# Check the environmanet variable
-. check_envval || exit $TST_TOTAL
-
-# Dulation of the test [sec]
-NS_DURATION=${NS_DURATION:-3600} # 1 hour
-
-# The number of the test link where tests run
-LINK_NUM=${LINK_NUM:-0}
-
-# Network portion of the IPv4 address
-NETWORK_PART=${IPV4_NETWORK:-"10.0.0"}
-
-# Netmask of the IPv4 network
-NETWORK_MASK=24
-
-# Host portion of the IPv4 address
-LHOST_HOST_PART=${LHOST_IPV4_HOST:-"2"} # local host
-RHOST_HOST_PART=${RHOST_IPV4_HOST:-"1"} # remote host
-
-# Multicast Address
-MCAST_ADDR=224.10.0.1
-
-
-#-----------------------------------------------------------------------
-#
-# Function: do_cleanup
-#
-# Description:
-# Recover the system configuration
-#
-#-----------------------------------------------------------------------
-do_cleanup()
-{
- # Make sure to kill the multicast receiver and sender
- killall -SIGHUP ns-mcast_receiver >/dev/null 2>&1
- $LTP_RSH $RHOST killall -SIGHUP ns-udpsender >/dev/null 2>&1
-
- # Clean up each interface
- initialize_if lhost ${LINK_NUM}
- initialize_if rhost ${LINK_NUM}
-}
-
-
-#-----------------------------------------------------------------------
-#
-# Function: do_setup
-#
-# Description:
-# Configure the ssystem for the test
-#
-#-----------------------------------------------------------------------
-do_setup()
-{
- # Initialize the system configuration
- do_cleanup
-
- # Call do_cleanup function before exit
- trap do_cleanup 0
-
- # Unset the maximum number of processes
- ulimit -u unlimited
-
- # name of interface of the local/remote host
- lhost_ifname=`get_ifname lhost $LINK_NUM`
- if [ $? -ne 0 ]; then
- tst_resm TBROK "Failed to get the interface name at the local host"
- exit $TST_TOTAL
- fi
-
- rhost_ifname=`get_ifname rhost $LINK_NUM`
- if [ $? -ne 0 ]; then
- tst_resm TBROK "Failed to get the interface name at the remote host"
- exit $TST_TOTAL
- fi
-
- # Set IPv4 addresses to the interfaces
- set_ipv4addr lhost $LINK_NUM $NETWORK_PART $LHOST_HOST_PART
- if [ $? -ne 0 ]; then
- tst_resm TBROK "Failed to add any IP address at the local host"
- exit 1
- fi
-
- set_ipv4addr rhost $LINK_NUM $NETWORK_PART $RHOST_HOST_PART
- if [ $? -ne 0 ]; then
- tst_resm TBROK "Failed to add any IP address at the remote host"
- exit 1
- fi
-
- # IPv4 address of the local/remote host
- lhost_addr="${NETWORK_PART}.${LHOST_HOST_PART}"
- rhost_addr="${NETWORK_PART}.${RHOST_HOST_PART}"
-
- # Make sure the connectvity
- check_icmpv4_connectivity $lhost_ifname $rhost_addr
- if [ $? -ne 0 ]; then
- tst_resm TBROK "There is no IPv4 connectivity."
- exit 1
- fi
-
- # Make sure the sysctl values
- sysctl -w net.ipv4.igmp_max_memberships=20 >/dev/null
- if [ $? -ne 0 ]; then
- tst_resm TBROK "Failed to set the sysctl value regarding multicast"
- exit $TST_TOTAL
- fi
-
- sysctl -w net.ipv4.igmp_max_msf=10 >/dev/null
- sysctl -w net.ipv4.conf.${lhost_ifname}.force_igmp_version=0 >/dev/null
- sysctl -w net.ipv4.conf.all.force_igmp_version=0 >/dev/null
-}
-
-
-#-----------------------------------------------------------------------
-#
-# Main
-#
-#
-
-# Test description
-tst_resm TINFO "Verify that the kernel is not crashed when joining a IPv4 multicast group a single socket, then receiving a large number of UDP packets at the socket in $NS_DURATION [sec]"
-
-do_setup
-
-# Find the available consecutive ports
-mcast_port=`find_portbundle udp 1025 1`
-if [ $? -ne 0 ]; then
- tst_resm TBROK "No port is available."
- exit 1
-fi
-
-# Run a receiver
-ns-mcast_receiver -f 4 -I $lhost_ifname -m $MCAST_ADDR -p $mcast_port -b
-if [ $? -ne 0 ]; then
- tst_resm TBROK "Failed to start multicast receiver"
- exit 1
-fi
-
-# Run a sender
-ret=`$LTP_RSH $RHOST ${LTPROOT}/testcases/bin/ns-udpsender -D $MCAST_ADDR -f 4 -p $mcast_port -s 32767 -m -I $rhost_ifname -t $NS_DURATION' ; echo $?'`
-if [ $ret -ne 0 ]; then
- tst_resm TBROK "Failed to start multicast sender"
- exit 1
-fi
-
-#-----------------------------------------------------------------------
-#
-# Clean up
-#
-
-tst_resm TPASS "Test is finished successfully."
-exit 0
diff --git a/testcases/network/stress/multicast/packet-flood/mcast4-pktfld02 b/testcases/network/stress/multicast/packet-flood/mcast4-pktfld02
deleted file mode 100644
index b3b6134c3..000000000
--- a/testcases/network/stress/multicast/packet-flood/mcast4-pktfld02
+++ /dev/null
@@ -1,225 +0,0 @@
-#!/bin/sh
-
-################################################################################
-## ##
-## Copyright (c) International Business Machines Corp., 2006 ##
-## ##
-## This program is free software; you can redistribute it and#or modify ##
-## it under the terms of the GNU General Public License as published by ##
-## the Free Software Foundation; either version 2 of the License, or ##
-## (at your option) any later version. ##
-## ##
-## This program is distributed in the hope that it will be useful, but ##
-## WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY ##
-## or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License ##
-## for more details. ##
-## ##
-## You should have received a copy of the GNU General Public License ##
-## along with this program; if not, write to the Free Software ##
-## Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA ##
-## ##
-## ##
-################################################################################
-#
-# File:
-# mcast4-pktfld02
-#
-# Description:
-# Verify that the kernel is not crashed when joining plural IPv4 multicast
-# groups on separate sockets, then receiving a large number of UDP packets at
-# the each socket
-#
-# Setup:
-# See testcases/network/stress/README
-#
-# Author:
-# Mitsuru Chinen <mitch@jp.ibm.com>
-#
-# History:
-# May 1 2006 - Created (Mitsuru Chinen)
-#
-#-----------------------------------------------------------------------
-# Uncomment line below for debug output.
-#trace_logic=${trace_logic:-"set -x"}
-$trace_logic
-
-# The test case ID, the test case count and the total number of test case
-TCID=mcast4-pktfld02
-TST_TOTAL=1
-TST_COUNT=1
-export TCID
-export TST_COUNT
-export TST_TOTAL
-
-LTPROOT=${LTPROOT:-`(cd ../../../../.. ; pwd)`}
-export LTPROOT
-
-# Check the environmanet variable
-. check_envval || exit $TST_TOTAL
-
-# Dulation of the test [sec]
-NS_DURATION=${NS_DURATION:-3600} # 1 hour
-
-# The number of the test link where tests run
-LINK_NUM=${LINK_NUM:-0}
-
-# Network portion of the IPv4 address
-NETWORK_PART=${IPV4_NETWORK:-"10.0.0"}
-
-# Netmask of the IPv4 network
-NETWORK_MASK=24
-
-# Host portion of the IPv4 address
-LHOST_HOST_PART=${LHOST_IPV4_HOST:-"2"} # local host
-RHOST_HOST_PART=${RHOST_IPV4_HOST:-"1"} # remote host
-
-# Prefix of the multicast address
-MCAST_ADDR_PREFIX=224.10
-
-# Number of the multicast connection
-MCASTNUM_NORMAL=${MCASTNUM_NORMAL:-20}
-
-
-#-----------------------------------------------------------------------
-#
-# Function: do_cleanup
-#
-# Description:
-# Recover the system configuration
-#
-#-----------------------------------------------------------------------
-do_cleanup()
-{
- # Make sure to kill the multicast receiver and sender
- killall -SIGHUP ns-mcast_receiver >/dev/null 2>&1
- $LTP_RSH $RHOST killall -SIGHUP ns-udpsender >/dev/null 2>&1
-
- # Clean up each interface
- initialize_if lhost ${LINK_NUM}
- initialize_if rhost ${LINK_NUM}
-}
-
-
-#-----------------------------------------------------------------------
-#
-# Function: do_setup
-#
-# Description:
-# Configure the ssystem for the test
-#
-#-----------------------------------------------------------------------
-do_setup()
-{
- # Initialize the system configuration
- do_cleanup
-
- # Call do_cleanup function before exit
- trap do_cleanup 0
-
- # Unset the maximum number of processes
- ulimit -u unlimited
-
- # name of interface of the local/remote host
- lhost_ifname=`get_ifname lhost $LINK_NUM`
- if [ $? -ne 0 ]; then
- tst_resm TBROK "Failed to get the interface name at the local host"
- exit $TST_TOTAL
- fi
-
- rhost_ifname=`get_ifname rhost $LINK_NUM`
- if [ $? -ne 0 ]; then
- tst_resm TBROK "Failed to get the interface name at the remote host"
- exit $TST_TOTAL
- fi
-
- # Set IPv4 addresses to the interfaces
- set_ipv4addr lhost $LINK_NUM $NETWORK_PART $LHOST_HOST_PART
- if [ $? -ne 0 ]; then
- tst_resm TBROK "Failed to add any IP address at the local host"
- exit 1
- fi
-
- set_ipv4addr rhost $LINK_NUM $NETWORK_PART $RHOST_HOST_PART
- if [ $? -ne 0 ]; then
- tst_resm TBROK "Failed to add any IP address at the remote host"
- exit 1
- fi
-
- # IPv4 address of the local/remote host
- lhost_addr="${NETWORK_PART}.${LHOST_HOST_PART}"
- rhost_addr="${NETWORK_PART}.${RHOST_HOST_PART}"
-
- # Make sure the connectvity
- check_icmpv4_connectivity $lhost_ifname $rhost_addr
- if [ $? -ne 0 ]; then
- tst_resm TBROK "There is no IPv4 connectivity."
- exit 1
- fi
-
- # Make sure the sysctl values
- sysctl -w net.ipv4.igmp_max_memberships=$MCASTNUM_NORMAL >/dev/null
- if [ $? -ne 0 ]; then
- tst_resm TBROK "Failed to set the sysctl value regarding multicast"
- exit $TST_TOTAL
- fi
-
- sysctl -w net.ipv4.igmp_max_msf=10 >/dev/null
- sysctl -w net.ipv4.conf.${lhost_ifname}.force_igmp_version=0 >/dev/null
- sysctl -w net.ipv4.conf.all.force_igmp_version=0 >/dev/null
-}
-
-
-#-----------------------------------------------------------------------
-#
-# Main
-#
-#
-
-# Test description
-tst_resm TINFO "Verify that the kernel is not crashed when joining $MCASTNUM_NORMAL IPv4 multicast groups on separate sockets, then receiving a large number of UDP packets at the each socket in $NS_DURATION [sec]"
-
-# Make sure the value of LTPROOT
-do_setup
-
-mcastnum=0
-mcast_port_range=`find_portbundle udp 1025 $MCASTNUM_NORMAL`
-if [ $? -ne 0 ]; then
- tst_resm TBROK "Failed to get enough port"
- exit 1
-fi
-mcast_port_top=`echo $mcast_port_range | cut -f 1 -d '-'`
-
-while [ $mcastnum -lt $MCASTNUM_NORMAL ]; do
- # Define the multicast address
- x=`expr $mcastnum \/ 254`
- y=`expr $mcastnum % 254 + 1`
- if [ $x -gt 254 ]; then
- tst_resm TINFO "The number of the connection is less than $mcastnum"
- break
- fi
- mcast_addr=${MCAST_ADDR_PREFIX}.${x}.${y}
-
- # Run a receiver
- mcast_port=`expr $mcast_port_top + $mcastnum`
- ns-mcast_receiver -f 4 -I $lhost_ifname -m $mcast_addr -p $mcast_port -b
- if [ $? -ne 0 ]; then
- tst_resm TBROK "Failed to start multicast receiver"
- exit 1
- fi
-
- # Run a sender
- $LTP_RSH $RHOST ${LTPROOT}/testcases/bin/ns-udpsender -D $mcast_addr -f 4 -p $mcast_port -m -I $rhost_ifname -b -t $NS_DURATION
-
- mcastnum=`expr $mcastnum + 1`
-done
-
-sleep $NS_DURATION
-do_cleanup
-
-#-----------------------------------------------------------------------
-#
-# Clean up
-#
-
-tst_resm TPASS "Test is finished successfully."
-exit 0
diff --git a/testcases/network/stress/multicast/packet-flood/mcast6-pktfld01 b/testcases/network/stress/multicast/packet-flood/mcast6-pktfld01
deleted file mode 100644
index e9d932b43..000000000
--- a/testcases/network/stress/multicast/packet-flood/mcast6-pktfld01
+++ /dev/null
@@ -1,203 +0,0 @@
-#!/bin/sh
-
-################################################################################
-## ##
-## Copyright (c) International Business Machines Corp., 2006 ##
-## ##
-## This program is free software; you can redistribute it and#or modify ##
-## it under the terms of the GNU General Public License as published by ##
-## the Free Software Foundation; either version 2 of the License, or ##
-## (at your option) any later version. ##
-## ##
-## This program is distributed in the hope that it will be useful, but ##
-## WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY ##
-## or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License ##
-## for more details. ##
-## ##
-## You should have received a copy of the GNU General Public License ##
-## along with this program; if not, write to the Free Software ##
-## Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA ##
-## ##
-## ##
-################################################################################
-#
-# File:
-# mcast6-pktfld01
-#
-# Description:
-# Verify that the kernel is not crashed when joining a IPv6 multicast group
-# a single socket, then receiving a large number of UDP packets at the socket
-#
-# Setup:
-# See testcases/network/stress/README
-#
-# Author:
-# Mitsuru Chinen <mitch@jp.ibm.com>
-#
-# History:
-# May 6 2006 - Created (Mitsuru Chinen)
-#
-#-----------------------------------------------------------------------
-# Uncomment line below for debug output.
-#trace_logic=${trace_logic:-"set -x"}
-$trace_logic
-
-# The test case ID, the test case count and the total number of test case
-TCID=mcast6-pktfld01
-TST_TOTAL=1
-TST_COUNT=1
-export TCID
-export TST_COUNT
-export TST_TOTAL
-
-# Make sure the value of LTPROOT
-LTPROOT=${LTPROOT:-`(cd ../../../../.. ; pwd)`}
-export LTPROOT
-
-# Check the environmanet variable
-. check_envval || exit $TST_TOTAL
-
-# Dulation of the test [sec]
-NS_DURATION=${NS_DURATION:-3600} # 1 hour
-
-# The number of the test link where tests run
-LINK_NUM=${LINK_NUM:-0}
-
-# Network portion of the IPv6 address
-NETWORK_PART="fec0:1:1:1"
-
-# Host portion of the IPv6 address
-LHOST_HOST_PART=":2" # local host
-RHOST_HOST_PART=":1" # remote host
-
-# Multicast Address
-MCAST_ADDR=ff0e::1111:1
-
-
-#-----------------------------------------------------------------------
-#
-# Function: do_cleanup
-#
-# Description:
-# Recover the system configuration
-#
-#-----------------------------------------------------------------------
-do_cleanup()
-{
- # Make sure to kill the multicast receiver and sender
- killall -SIGHUP ns-mcast_receiver >/dev/null 2>&1
- $LTP_RSH $RHOST killall -SIGHUP ns-udpsender >/dev/null 2>&1
-
- # Clean up each interface
- initialize_if lhost ${LINK_NUM}
- initialize_if rhost ${LINK_NUM}
-}
-
-
-#-----------------------------------------------------------------------
-#
-# Function: do_setup
-#
-# Description:
-# Configure the ssystem for the test
-#
-#-----------------------------------------------------------------------
-do_setup()
-{
- # Initialize the system configuration
- do_cleanup
-
- # Call do_cleanup function before exit
- trap do_cleanup 0
-
- # Unset the maximum number of processes
- ulimit -u unlimited
-
- # name of interface of the local/remote host
- lhost_ifname=`get_ifname lhost $LINK_NUM`
- if [ $? -ne 0 ]; then
- tst_resm TBROK "Failed to get the interface name at the local host"
- exit $TST_TOTAL
- fi
-
- rhost_ifname=`get_ifname rhost $LINK_NUM`
- if [ $? -ne 0 ]; then
- tst_resm TBROK "Failed to get the interface name at the remote host"
- exit $TST_TOTAL
- fi
-
- # Set IPv6 addresses to the interfaces
- add_ipv6addr lhost $LINK_NUM $NETWORK_PART $LHOST_HOST_PART
- if [ $? -ne 0 ]; then
- tst_resm TBROK "Failed to add any IP address at the local host"
- exit 1
- fi
-
- add_ipv6addr rhost $LINK_NUM $NETWORK_PART $RHOST_HOST_PART
- if [ $? -ne 0 ]; then
- tst_resm TBROK "Failed to add any IP address at the remote host"
- exit 1
- fi
-
- # IPv6 address of the local/remote host
- lhost_addr="${NETWORK_PART}:${LHOST_HOST_PART}"
- rhost_addr="${NETWORK_PART}:${RHOST_HOST_PART}"
-
- # Make sure the connectvity
- check_icmpv6_connectivity $lhost_ifname $rhost_addr
- if [ $? -ne 0 ]; then
- tst_resm TBROK "There is no IPv6 connectivity."
- exit 1
- fi
-
- # Make sure the sysctl values
- sysctl -w net.ipv6.conf.all.force_mld_version=0 >/dev/null
- if [ $? -ne 0 ]; then
- tst_resm TBROK "Failed to set the sysctl value regarding multicast"
- exit $TST_TOTAL
- fi
-
- sysctl -w net.ipv6.conf.${lhost_ifname}.force_mld_version=0 >/dev/null
- sysctl -w net.ipv6.mld_max_msf=10 >/dev/null
-}
-
-
-#-----------------------------------------------------------------------
-#
-# Main
-#
-#
-
-# Test description
-tst_resm TINFO "Verify that the kernel is not crashed when joining a IPv6 multicast group a single socket, then receiving a large number of UDP packets at the socket in $NS_DURATION [sec]"
-
-do_setup
-
-# Find the available consecutive ports
-mcast_port=`find_portbundle udp 1025 1`
-if [ $? -ne 0 ]; then
- tst_resm TBROK "No port is available."
- exit 1
-fi
-
-# Run a receiver
-ns-mcast_receiver -f 6 -I $lhost_ifname -m $MCAST_ADDR -p $mcast_port -b
-if [ $? -ne 0 ]; then
- tst_resm TBROK "Failed to start multicast receiver"
- exit 1
-fi
-
-# Run a sender
-ret=`$LTP_RSH $RHOST ${LTPROOT}/testcases/bin/ns-udpsender -D $MCAST_ADDR -f 6 -p $mcast_port -s 32767 -m -I $rhost_ifname -t $NS_DURATION' ; echo $?'`
-if [ $ret -ne 0 ]; then
- tst_resm TBROK "Failed to start multicast sender"
- exit 1
-fi
-
-#-----------------------------------------------------------------------
-#
-# Clean up
-#
-
-tst_resm TPASS "Test is finished successfully."
-exit 0
diff --git a/testcases/network/stress/multicast/packet-flood/mcast6-pktfld02 b/testcases/network/stress/multicast/packet-flood/mcast6-pktfld02
deleted file mode 100644
index e8187b1a6..000000000
--- a/testcases/network/stress/multicast/packet-flood/mcast6-pktfld02
+++ /dev/null
@@ -1,220 +0,0 @@
-#!/bin/sh
-
-################################################################################
-## ##
-## Copyright (c) International Business Machines Corp., 2006 ##
-## ##
-## This program is free software; you can redistribute it and#or modify ##
-## it under the terms of the GNU General Public License as published by ##
-## the Free Software Foundation; either version 2 of the License, or ##
-## (at your option) any later version. ##
-## ##
-## This program is distributed in the hope that it will be useful, but ##
-## WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY ##
-## or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License ##
-## for more details. ##
-## ##
-## You should have received a copy of the GNU General Public License ##
-## along with this program; if not, write to the Free Software ##
-## Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA ##
-## ##
-## ##
-################################################################################
-#
-# File:
-# mcast6-pktfld02
-#
-# Description:
-# Verify that the kernel is not crashed when joining plural IPv6 multicast
-# groups on separate sockets, then receiving a large number of UDP packets at
-# the each socket
-#
-# Setup:
-# See testcases/network/stress/README
-#
-# Author:
-# Mitsuru Chinen <mitch@jp.ibm.com>
-#
-# History:
-# May 1 2006 - Created (Mitsuru Chinen)
-#
-#-----------------------------------------------------------------------
-# Uncomment line below for debug output.
-#trace_logic=${trace_logic:-"set -x"}
-$trace_logic
-
-# The test case ID, the test case count and the total number of test case
-TCID=mcast6-pktfld02
-TST_TOTAL=1
-TST_COUNT=1
-export TCID
-export TST_COUNT
-export TST_TOTAL
-
-LTPROOT=${LTPROOT:-`(cd ../../../../.. ; pwd)`}
-export LTPROOT
-
-# Check the environmanet variable
-. check_envval || exit $TST_TOTAL
-
-# Dulation of the test [sec]
-NS_DURATION=${NS_DURATION:-3600} # 1 hour
-
-# The number of the test link where tests run
-LINK_NUM=${LINK_NUM:-0}
-
-# Network portion of the IPv6 address
-NETWORK_PART="fec0:1:1:1"
-
-# Host portion of the IPv6 address
-LHOST_HOST_PART=":2" # local host
-RHOST_HOST_PART=":1" # remote host
-
-# Prefix of the multicast address
-MCAST_ADDR_PREFIX=ff0e::1111
-
-# Number of the multicast connection
-MCASTNUM_NORMAL=${MCASTNUM_NORMAL:-20}
-
-
-#-----------------------------------------------------------------------
-#
-# Function: do_cleanup
-#
-# Description:
-# Recover the system configuration
-#
-#-----------------------------------------------------------------------
-do_cleanup()
-{
- # Make sure to kill the multicast receiver and sender
- killall -SIGHUP ns-mcast_receiver >/dev/null 2>&1
- $LTP_RSH $RHOST killall -SIGHUP ns-udpsender >/dev/null 2>&1
-
- # Clean up each interface
- initialize_if lhost ${LINK_NUM}
- initialize_if rhost ${LINK_NUM}
-}
-
-
-#-----------------------------------------------------------------------
-#
-# Function: do_setup
-#
-# Description:
-# Configure the ssystem for the test
-#
-#-----------------------------------------------------------------------
-do_setup()
-{
- # Initialize the system configuration
- do_cleanup
-
- # Call do_cleanup function before exit
- trap do_cleanup 0
-
- # Unset the maximum number of processes
- ulimit -u unlimited
-
- # name of interface of the local/remote host
- lhost_ifname=`get_ifname lhost $LINK_NUM`
- if [ $? -ne 0 ]; then
- tst_resm TBROK "Failed to get the interface name at the local host"
- exit $TST_TOTAL
- fi
-
- rhost_ifname=`get_ifname rhost $LINK_NUM`
- if [ $? -ne 0 ]; then
- tst_resm TBROK "Failed to get the interface name at the remote host"
- exit $TST_TOTAL
- fi
-
- # Set IPv6 addresses to the interfaces
- add_ipv6addr lhost $LINK_NUM $NETWORK_PART $LHOST_HOST_PART
- if [ $? -ne 0 ]; then
- tst_resm TBROK "Failed to add any IP address at the local host"
- exit 1
- fi
-
- add_ipv6addr rhost $LINK_NUM $NETWORK_PART $RHOST_HOST_PART
- if [ $? -ne 0 ]; then
- tst_resm TBROK "Failed to add any IP address at the remote host"
- exit 1
- fi
-
- # IPv6 address of the local/remote host
- lhost_addr="${NETWORK_PART}:${LHOST_HOST_PART}"
- rhost_addr="${NETWORK_PART}:${RHOST_HOST_PART}"
-
- # Make sure the connectvity
- check_icmpv6_connectivity $lhost_ifname $rhost_addr
- if [ $? -ne 0 ]; then
- tst_resm TBROK "There is no IPv6 connectivity."
- exit 1
- fi
-
- # Make sure the sysctl values
- sysctl -w net.ipv6.conf.all.force_mld_version=0 >/dev/null
- if [ $? -ne 0 ]; then
- tst_resm TBROK "Failed to set the sysctl value regarding multicast"
- exit $TST_TOTAL
- fi
-
- sysctl -w net.ipv6.conf.${lhost_ifname}.force_mld_version=0 >/dev/null
- sysctl -w net.ipv6.mld_max_msf=10 >/dev/null
-}
-
-
-#-----------------------------------------------------------------------
-#
-# Main
-#
-#
-
-# Test description
-tst_resm TINFO "Verify that the kernel is not crashed when joining $MCASTNUM_NORMAL IPv6 multicast groups on separate sockets, then receiving a large number of UDP packets at the each socket in $NS_DURATION [sec]"
-
-# Make sure the value of LTPROOT
-do_setup
-
-mcastnum=0
-mcast_port_range=`find_portbundle udp 1025 $MCASTNUM_NORMAL`
-if [ $? -ne 0 ]; then
- tst_resm TBROK "Failed to get enough port"
- exit 1
-fi
-mcast_port_top=`echo $mcast_port_range | cut -f 1 -d '-'`
-
-while [ $mcastnum -lt $MCASTNUM_NORMAL ]; do
- # Define the multicast address
- if [ $mcastnum -gt 65535 ]; then
- tst_resm TINFO "The number of the connection is less than 65535"
- break
- fi
- mcastnum_hex=`printf "%x" $mcastnum`
- mcast_addr=${MCAST_ADDR_PREFIX}:${mcastnum_hex}
-
- # Run a receiver
- mcast_port=`expr $mcast_port_top + $mcastnum`
- ns-mcast_receiver -f 6 -I $lhost_ifname -m $mcast_addr -p $mcast_port -b
- if [ $? -ne 0 ]; then
- tst_resm TBROK "Failed to start multicast receiver"
- exit 1
- fi
-
- # Run a sender
- $LTP_RSH $RHOST ${LTPROOT}/testcases/bin/ns-udpsender -D $mcast_addr -f 6 -p $mcast_port -m -I $rhost_ifname -b -t $NS_DURATION
-
- mcastnum=`expr $mcastnum + 1`
-done
-
-sleep $NS_DURATION
-do_cleanup
-
-#-----------------------------------------------------------------------
-#
-# Clean up
-#
-
-tst_resm TPASS "Test is finished successfully."
-exit 0
--
2.25.1
next reply other threads:[~2020-11-17 12:43 UTC|newest]
Thread overview: 9+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-11-17 12:43 Joerg Vehlow [this message]
2020-11-17 12:43 ` [LTP] [PATCH v2 2/3] network/stress/multicast/query-flood: Convert to new API Joerg Vehlow
2020-11-18 21:27 ` Petr Vorel
2020-11-19 7:50 ` Joerg Vehlow
2020-11-17 12:43 ` [LTP] [PATCH v2 3/3] network/stress/route-change: " Joerg Vehlow
2020-11-18 17:04 ` [LTP] [PATCH v2 1/3] network/stress/multicast/packet-flood: Update " Alexey Kodanev
2020-11-19 7:49 ` Joerg Vehlow
2020-11-19 11:57 ` Alexey Kodanev
2020-11-19 12:05 ` Joerg Vehlow
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20201117124320.783802-1-lkml@jv-coder.de \
--to=lkml@jv-coder.de \
--cc=ltp@lists.linux.it \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.