All of lore.kernel.org
 help / color / mirror / Atom feed
From: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
To: linux-arm-msm@vger.kernel.org, kvalo@codeaurora.org
Cc: linux-wireless@vger.kernel.org, ath11k@lists.infradead.org,
	netdev@vger.kernel.org, hemantk@codeaurora.org,
	bbhatt@codeaurora.org, Loic Poulain <loic.poulain@linaro.org>,
	Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Subject: [PATCH] bus: mhi: Remove auto-start option
Date: Wed, 18 Nov 2020 11:01:02 +0530	[thread overview]
Message-ID: <20201118053102.13119-1-manivannan.sadhasivam@linaro.org> (raw)

From: Loic Poulain <loic.poulain@linaro.org>

There is really no point having an auto-start for channels.
This is confusing for the device drivers, some have to enable the
channels, others don't have... and waste resources (e.g. pre allocated
buffers) that may never be used.

This is really up to the MHI device(channel) driver to manage the state
of its channels.

While at it, let's also remove the auto-start option from ath11k mhi
controller.

Signed-off-by: Loic Poulain <loic.poulain@linaro.org>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
[mani: clubbed ath11k change]
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
---
 drivers/bus/mhi/core/init.c           | 9 ---------
 drivers/bus/mhi/core/internal.h       | 1 -
 drivers/net/wireless/ath/ath11k/mhi.c | 4 ----
 include/linux/mhi.h                   | 2 --
 4 files changed, 16 deletions(-)

diff --git a/drivers/bus/mhi/core/init.c b/drivers/bus/mhi/core/init.c
index 0ffdebde8265..381fdea2eb9f 100644
--- a/drivers/bus/mhi/core/init.c
+++ b/drivers/bus/mhi/core/init.c
@@ -758,7 +758,6 @@ static int parse_ch_cfg(struct mhi_controller *mhi_cntrl,
 		mhi_chan->offload_ch = ch_cfg->offload_channel;
 		mhi_chan->db_cfg.reset_req = ch_cfg->doorbell_mode_switch;
 		mhi_chan->pre_alloc = ch_cfg->auto_queue;
-		mhi_chan->auto_start = ch_cfg->auto_start;
 
 		/*
 		 * If MHI host allocates buffers, then the channel direction
@@ -1160,11 +1159,6 @@ static int mhi_driver_probe(struct device *dev)
 			goto exit_probe;
 
 		ul_chan->xfer_cb = mhi_drv->ul_xfer_cb;
-		if (ul_chan->auto_start) {
-			ret = mhi_prepare_channel(mhi_cntrl, ul_chan);
-			if (ret)
-				goto exit_probe;
-		}
 	}
 
 	ret = -EINVAL;
@@ -1198,9 +1192,6 @@ static int mhi_driver_probe(struct device *dev)
 	if (ret)
 		goto exit_probe;
 
-	if (dl_chan && dl_chan->auto_start)
-		mhi_prepare_channel(mhi_cntrl, dl_chan);
-
 	mhi_device_put(mhi_dev);
 
 	return ret;
diff --git a/drivers/bus/mhi/core/internal.h b/drivers/bus/mhi/core/internal.h
index 7989269ddd96..33c23203c531 100644
--- a/drivers/bus/mhi/core/internal.h
+++ b/drivers/bus/mhi/core/internal.h
@@ -563,7 +563,6 @@ struct mhi_chan {
 	bool configured;
 	bool offload_ch;
 	bool pre_alloc;
-	bool auto_start;
 	bool wake_capable;
 };
 
diff --git a/drivers/net/wireless/ath/ath11k/mhi.c b/drivers/net/wireless/ath/ath11k/mhi.c
index aded9a719d51..47a1ce1bee4f 100644
--- a/drivers/net/wireless/ath/ath11k/mhi.c
+++ b/drivers/net/wireless/ath/ath11k/mhi.c
@@ -24,7 +24,6 @@ static struct mhi_channel_config ath11k_mhi_channels[] = {
 		.offload_channel = false,
 		.doorbell_mode_switch = false,
 		.auto_queue = false,
-		.auto_start = false,
 	},
 	{
 		.num = 1,
@@ -39,7 +38,6 @@ static struct mhi_channel_config ath11k_mhi_channels[] = {
 		.offload_channel = false,
 		.doorbell_mode_switch = false,
 		.auto_queue = false,
-		.auto_start = false,
 	},
 	{
 		.num = 20,
@@ -54,7 +52,6 @@ static struct mhi_channel_config ath11k_mhi_channels[] = {
 		.offload_channel = false,
 		.doorbell_mode_switch = false,
 		.auto_queue = false,
-		.auto_start = true,
 	},
 	{
 		.num = 21,
@@ -69,7 +66,6 @@ static struct mhi_channel_config ath11k_mhi_channels[] = {
 		.offload_channel = false,
 		.doorbell_mode_switch = false,
 		.auto_queue = true,
-		.auto_start = true,
 	},
 };
 
diff --git a/include/linux/mhi.h b/include/linux/mhi.h
index d4841e5a5f45..6522a4adc794 100644
--- a/include/linux/mhi.h
+++ b/include/linux/mhi.h
@@ -214,7 +214,6 @@ enum mhi_db_brst_mode {
  * @offload_channel: The client manages the channel completely
  * @doorbell_mode_switch: Channel switches to doorbell mode on M0 transition
  * @auto_queue: Framework will automatically queue buffers for DL traffic
- * @auto_start: Automatically start (open) this channel
  * @wake-capable: Channel capable of waking up the system
  */
 struct mhi_channel_config {
@@ -232,7 +231,6 @@ struct mhi_channel_config {
 	bool offload_channel;
 	bool doorbell_mode_switch;
 	bool auto_queue;
-	bool auto_start;
 	bool wake_capable;
 };
 
-- 
2.17.1


WARNING: multiple messages have this Message-ID (diff)
From: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
To: linux-arm-msm@vger.kernel.org, kvalo@codeaurora.org
Cc: Loic Poulain <loic.poulain@linaro.org>,
	netdev@vger.kernel.org, linux-wireless@vger.kernel.org,
	bbhatt@codeaurora.org,
	Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>,
	hemantk@codeaurora.org, ath11k@lists.infradead.org
Subject: [PATCH] bus: mhi: Remove auto-start option
Date: Wed, 18 Nov 2020 11:01:02 +0530	[thread overview]
Message-ID: <20201118053102.13119-1-manivannan.sadhasivam@linaro.org> (raw)

From: Loic Poulain <loic.poulain@linaro.org>

There is really no point having an auto-start for channels.
This is confusing for the device drivers, some have to enable the
channels, others don't have... and waste resources (e.g. pre allocated
buffers) that may never be used.

This is really up to the MHI device(channel) driver to manage the state
of its channels.

While at it, let's also remove the auto-start option from ath11k mhi
controller.

Signed-off-by: Loic Poulain <loic.poulain@linaro.org>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
[mani: clubbed ath11k change]
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
---
 drivers/bus/mhi/core/init.c           | 9 ---------
 drivers/bus/mhi/core/internal.h       | 1 -
 drivers/net/wireless/ath/ath11k/mhi.c | 4 ----
 include/linux/mhi.h                   | 2 --
 4 files changed, 16 deletions(-)

diff --git a/drivers/bus/mhi/core/init.c b/drivers/bus/mhi/core/init.c
index 0ffdebde8265..381fdea2eb9f 100644
--- a/drivers/bus/mhi/core/init.c
+++ b/drivers/bus/mhi/core/init.c
@@ -758,7 +758,6 @@ static int parse_ch_cfg(struct mhi_controller *mhi_cntrl,
 		mhi_chan->offload_ch = ch_cfg->offload_channel;
 		mhi_chan->db_cfg.reset_req = ch_cfg->doorbell_mode_switch;
 		mhi_chan->pre_alloc = ch_cfg->auto_queue;
-		mhi_chan->auto_start = ch_cfg->auto_start;
 
 		/*
 		 * If MHI host allocates buffers, then the channel direction
@@ -1160,11 +1159,6 @@ static int mhi_driver_probe(struct device *dev)
 			goto exit_probe;
 
 		ul_chan->xfer_cb = mhi_drv->ul_xfer_cb;
-		if (ul_chan->auto_start) {
-			ret = mhi_prepare_channel(mhi_cntrl, ul_chan);
-			if (ret)
-				goto exit_probe;
-		}
 	}
 
 	ret = -EINVAL;
@@ -1198,9 +1192,6 @@ static int mhi_driver_probe(struct device *dev)
 	if (ret)
 		goto exit_probe;
 
-	if (dl_chan && dl_chan->auto_start)
-		mhi_prepare_channel(mhi_cntrl, dl_chan);
-
 	mhi_device_put(mhi_dev);
 
 	return ret;
diff --git a/drivers/bus/mhi/core/internal.h b/drivers/bus/mhi/core/internal.h
index 7989269ddd96..33c23203c531 100644
--- a/drivers/bus/mhi/core/internal.h
+++ b/drivers/bus/mhi/core/internal.h
@@ -563,7 +563,6 @@ struct mhi_chan {
 	bool configured;
 	bool offload_ch;
 	bool pre_alloc;
-	bool auto_start;
 	bool wake_capable;
 };
 
diff --git a/drivers/net/wireless/ath/ath11k/mhi.c b/drivers/net/wireless/ath/ath11k/mhi.c
index aded9a719d51..47a1ce1bee4f 100644
--- a/drivers/net/wireless/ath/ath11k/mhi.c
+++ b/drivers/net/wireless/ath/ath11k/mhi.c
@@ -24,7 +24,6 @@ static struct mhi_channel_config ath11k_mhi_channels[] = {
 		.offload_channel = false,
 		.doorbell_mode_switch = false,
 		.auto_queue = false,
-		.auto_start = false,
 	},
 	{
 		.num = 1,
@@ -39,7 +38,6 @@ static struct mhi_channel_config ath11k_mhi_channels[] = {
 		.offload_channel = false,
 		.doorbell_mode_switch = false,
 		.auto_queue = false,
-		.auto_start = false,
 	},
 	{
 		.num = 20,
@@ -54,7 +52,6 @@ static struct mhi_channel_config ath11k_mhi_channels[] = {
 		.offload_channel = false,
 		.doorbell_mode_switch = false,
 		.auto_queue = false,
-		.auto_start = true,
 	},
 	{
 		.num = 21,
@@ -69,7 +66,6 @@ static struct mhi_channel_config ath11k_mhi_channels[] = {
 		.offload_channel = false,
 		.doorbell_mode_switch = false,
 		.auto_queue = true,
-		.auto_start = true,
 	},
 };
 
diff --git a/include/linux/mhi.h b/include/linux/mhi.h
index d4841e5a5f45..6522a4adc794 100644
--- a/include/linux/mhi.h
+++ b/include/linux/mhi.h
@@ -214,7 +214,6 @@ enum mhi_db_brst_mode {
  * @offload_channel: The client manages the channel completely
  * @doorbell_mode_switch: Channel switches to doorbell mode on M0 transition
  * @auto_queue: Framework will automatically queue buffers for DL traffic
- * @auto_start: Automatically start (open) this channel
  * @wake-capable: Channel capable of waking up the system
  */
 struct mhi_channel_config {
@@ -232,7 +231,6 @@ struct mhi_channel_config {
 	bool offload_channel;
 	bool doorbell_mode_switch;
 	bool auto_queue;
-	bool auto_start;
 	bool wake_capable;
 };
 
-- 
2.17.1


-- 
ath11k mailing list
ath11k@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/ath11k

             reply	other threads:[~2020-11-18  5:31 UTC|newest]

Thread overview: 19+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2020-11-18  5:31 Manivannan Sadhasivam [this message]
2020-11-18  5:31 ` [PATCH] bus: mhi: Remove auto-start option Manivannan Sadhasivam
2020-11-18  5:43 ` Kalle Valo
2020-11-18  5:43   ` Kalle Valo
2020-11-18  9:31   ` Manivannan Sadhasivam
2020-11-18  9:31     ` Manivannan Sadhasivam
2020-11-18 11:55     ` Carl Huang
2020-11-18 11:55       ` Carl Huang
2020-11-18 11:57       ` Manivannan Sadhasivam
2020-11-18 11:57         ` Manivannan Sadhasivam
2020-11-18 17:46         ` Bhaumik Bhatt
2020-11-18 17:46           ` Bhaumik Bhatt
2020-11-24 15:45     ` Kalle Valo
2020-11-24 15:45       ` Kalle Valo
2020-12-29 20:15 ` patchwork-bot+linux-arm-msm
  -- strict thread matches above, loose matches on Subject: below --
2020-09-18 10:16 Loic Poulain
2020-09-19  2:38 ` bbhatt
2020-09-19 11:27 ` Manivannan Sadhasivam
2020-09-21  7:07   ` Loic Poulain

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20201118053102.13119-1-manivannan.sadhasivam@linaro.org \
    --to=manivannan.sadhasivam@linaro.org \
    --cc=ath11k@lists.infradead.org \
    --cc=bbhatt@codeaurora.org \
    --cc=hemantk@codeaurora.org \
    --cc=kvalo@codeaurora.org \
    --cc=linux-arm-msm@vger.kernel.org \
    --cc=linux-wireless@vger.kernel.org \
    --cc=loic.poulain@linaro.org \
    --cc=netdev@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.