* Re: [PATCH 2/2] clk: meson: g12a: add MIPI DSI Host Pixel Clock
@ 2020-11-25 17:32 ` Jerome Brunet
0 siblings, 0 replies; 15+ messages in thread
From: Jerome Brunet @ 2020-11-25 17:32 UTC (permalink / raw)
To: Neil Armstrong; +Cc: linux-amlogic, linux-clk, linux-arm-kernel, linux-kernel
On Mon 23 Nov 2020 at 17:38, Neil Armstrong <narmstrong@baylibre.com> wrote:
> This adds the MIPI DSI Host Pixel Clock, unlike AXG, the pixel clock can be different
> from the VPU ENCL output clock to feed the DSI Host controller with a different clock rate.
>
> Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Series looks good.
2 minor comments below
> ---
> drivers/clk/meson/g12a.c | 72 ++++++++++++++++++++++++++++++++++++++++
> drivers/clk/meson/g12a.h | 3 +-
> 2 files changed, 74 insertions(+), 1 deletion(-)
>
> diff --git a/drivers/clk/meson/g12a.c b/drivers/clk/meson/g12a.c
> index 3cb8196c8e29..3dedf8408405 100644
> --- a/drivers/clk/meson/g12a.c
> +++ b/drivers/clk/meson/g12a.c
> @@ -3658,6 +3658,66 @@ static struct clk_regmap g12a_hdmi_tx = {
> },
> };
>
> +/* MIPI DSI Host Clocks */
> +
> +static const struct clk_hw *g12a_mipi_dsi_pxclk_parent_hws[] = {
> + &g12a_vid_pll.hw,
> + &g12a_gp0_pll.hw,
> + &g12a_hifi_pll.hw,
> + &g12a_mpll1.hw,
> + &g12a_fclk_div2.hw,
> + &g12a_fclk_div2p5.hw,
> + &g12a_fclk_div3.hw,
> + &g12a_fclk_div7.hw,
> +};
> +
> +static struct clk_regmap g12a_mipi_dsi_pxclk_sel = {
> + .data = &(struct clk_regmap_mux_data){
> + .offset = HHI_MIPIDSI_PHY_CLK_CNTL,
> + .mask = 0x7,
> + .shift = 12,
> + .flags = CLK_MUX_ROUND_CLOSEST,
> + },
> + .hw.init = &(struct clk_init_data){
> + .name = "mipi_dsi_pxclk_sel",
> + .ops = &clk_regmap_mux_ops,
> + .parent_hws = g12a_mipi_dsi_pxclk_parent_hws,
> + .num_parents = ARRAY_SIZE(g12a_mipi_dsi_pxclk_parent_hws),
> + .flags = CLK_SET_RATE_PARENT,
The id of the mux is exposed which seems to hint the mux will be
manually controller but CLK_SET_RATE_NO_REPARENT is not set. Is this on
purpose ?
> + },
> +};
> +
> +static struct clk_regmap g12a_mipi_dsi_pxclk_div = {
> + .data = &(struct clk_regmap_div_data){
> + .offset = HHI_MIPIDSI_PHY_CLK_CNTL,
> + .shift = 0,
> + .width = 7,
> + },
> + .hw.init = &(struct clk_init_data){
> + .name = "mipi_dsi_pxclk_div",
> + .ops = &clk_regmap_divider_ops,
> + .parent_hws = (const struct clk_hw *[]) {
> + &g12a_mipi_dsi_pxclk_sel.hw },
Alignment here is weird compared to the reset of the file
> + .num_parents = 1,
> + .flags = CLK_SET_RATE_PARENT,
> + },
> +};
> +
> +static struct clk_regmap g12a_mipi_dsi_pxclk = {
> + .data = &(struct clk_regmap_gate_data){
> + .offset = HHI_MIPIDSI_PHY_CLK_CNTL,
> + .bit_idx = 8,
> + },
> + .hw.init = &(struct clk_init_data) {
> + .name = "mipi_dsi_pxclk",
> + .ops = &clk_regmap_gate_ops,
> + .parent_hws = (const struct clk_hw *[]) {
> + &g12a_mipi_dsi_pxclk_div.hw },
> + .num_parents = 1,
> + .flags = CLK_SET_RATE_PARENT,
> + },
> +};
> +
> /* HDMI Clocks */
>
> static const struct clk_parent_data g12a_hdmi_parent_data[] = {
> @@ -4403,6 +4463,9 @@ static struct clk_hw_onecell_data g12a_hw_onecell_data = {
> [CLKID_SPICC1_SCLK_SEL] = &g12a_spicc1_sclk_sel.hw,
> [CLKID_SPICC1_SCLK_DIV] = &g12a_spicc1_sclk_div.hw,
> [CLKID_SPICC1_SCLK] = &g12a_spicc1_sclk.hw,
> + [CLKID_MIPI_DSI_PXCLK_SEL] = &g12a_mipi_dsi_pxclk_sel.hw,
> + [CLKID_MIPI_DSI_PXCLK_DIV] = &g12a_mipi_dsi_pxclk_div.hw,
> + [CLKID_MIPI_DSI_PXCLK] = &g12a_mipi_dsi_pxclk.hw,
> [NR_CLKS] = NULL,
> },
> .num = NR_CLKS,
> @@ -4658,6 +4721,9 @@ static struct clk_hw_onecell_data g12b_hw_onecell_data = {
> [CLKID_SPICC1_SCLK_SEL] = &g12a_spicc1_sclk_sel.hw,
> [CLKID_SPICC1_SCLK_DIV] = &g12a_spicc1_sclk_div.hw,
> [CLKID_SPICC1_SCLK] = &g12a_spicc1_sclk.hw,
> + [CLKID_MIPI_DSI_PXCLK_SEL] = &g12a_mipi_dsi_pxclk_sel.hw,
> + [CLKID_MIPI_DSI_PXCLK_DIV] = &g12a_mipi_dsi_pxclk_div.hw,
> + [CLKID_MIPI_DSI_PXCLK] = &g12a_mipi_dsi_pxclk.hw,
> [NR_CLKS] = NULL,
> },
> .num = NR_CLKS,
> @@ -4904,6 +4970,9 @@ static struct clk_hw_onecell_data sm1_hw_onecell_data = {
> [CLKID_NNA_CORE_CLK_SEL] = &sm1_nna_core_clk_sel.hw,
> [CLKID_NNA_CORE_CLK_DIV] = &sm1_nna_core_clk_div.hw,
> [CLKID_NNA_CORE_CLK] = &sm1_nna_core_clk.hw,
> + [CLKID_MIPI_DSI_PXCLK_SEL] = &g12a_mipi_dsi_pxclk_sel.hw,
> + [CLKID_MIPI_DSI_PXCLK_DIV] = &g12a_mipi_dsi_pxclk_div.hw,
> + [CLKID_MIPI_DSI_PXCLK] = &g12a_mipi_dsi_pxclk.hw,
> [NR_CLKS] = NULL,
> },
> .num = NR_CLKS,
> @@ -5151,6 +5220,9 @@ static struct clk_regmap *const g12a_clk_regmaps[] = {
> &sm1_nna_core_clk_sel,
> &sm1_nna_core_clk_div,
> &sm1_nna_core_clk,
> + &g12a_mipi_dsi_pxclk_sel,
> + &g12a_mipi_dsi_pxclk_div,
> + &g12a_mipi_dsi_pxclk,
> };
>
> static const struct reg_sequence g12a_init_regs[] = {
> diff --git a/drivers/clk/meson/g12a.h b/drivers/clk/meson/g12a.h
> index 69b6a69549c7..a97613df38b3 100644
> --- a/drivers/clk/meson/g12a.h
> +++ b/drivers/clk/meson/g12a.h
> @@ -264,8 +264,9 @@
> #define CLKID_NNA_AXI_CLK_DIV 263
> #define CLKID_NNA_CORE_CLK_SEL 265
> #define CLKID_NNA_CORE_CLK_DIV 266
> +#define CLKID_MIPI_DSI_PXCLK_DIV 268
>
> -#define NR_CLKS 268
> +#define NR_CLKS 271
>
> /* include the CLKIDs that have been made part of the DT binding */
> #include <dt-bindings/clock/g12a-clkc.h>
_______________________________________________
linux-amlogic mailing list
linux-amlogic@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-amlogic
^ permalink raw reply [flat|nested] 15+ messages in thread
* Re: [PATCH 2/2] clk: meson: g12a: add MIPI DSI Host Pixel Clock
@ 2020-11-25 17:32 ` Jerome Brunet
0 siblings, 0 replies; 15+ messages in thread
From: Jerome Brunet @ 2020-11-25 17:32 UTC (permalink / raw)
To: Neil Armstrong; +Cc: linux-amlogic, linux-clk, linux-arm-kernel, linux-kernel
On Mon 23 Nov 2020 at 17:38, Neil Armstrong <narmstrong@baylibre.com> wrote:
> This adds the MIPI DSI Host Pixel Clock, unlike AXG, the pixel clock can be different
> from the VPU ENCL output clock to feed the DSI Host controller with a different clock rate.
>
> Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Series looks good.
2 minor comments below
> ---
> drivers/clk/meson/g12a.c | 72 ++++++++++++++++++++++++++++++++++++++++
> drivers/clk/meson/g12a.h | 3 +-
> 2 files changed, 74 insertions(+), 1 deletion(-)
>
> diff --git a/drivers/clk/meson/g12a.c b/drivers/clk/meson/g12a.c
> index 3cb8196c8e29..3dedf8408405 100644
> --- a/drivers/clk/meson/g12a.c
> +++ b/drivers/clk/meson/g12a.c
> @@ -3658,6 +3658,66 @@ static struct clk_regmap g12a_hdmi_tx = {
> },
> };
>
> +/* MIPI DSI Host Clocks */
> +
> +static const struct clk_hw *g12a_mipi_dsi_pxclk_parent_hws[] = {
> + &g12a_vid_pll.hw,
> + &g12a_gp0_pll.hw,
> + &g12a_hifi_pll.hw,
> + &g12a_mpll1.hw,
> + &g12a_fclk_div2.hw,
> + &g12a_fclk_div2p5.hw,
> + &g12a_fclk_div3.hw,
> + &g12a_fclk_div7.hw,
> +};
> +
> +static struct clk_regmap g12a_mipi_dsi_pxclk_sel = {
> + .data = &(struct clk_regmap_mux_data){
> + .offset = HHI_MIPIDSI_PHY_CLK_CNTL,
> + .mask = 0x7,
> + .shift = 12,
> + .flags = CLK_MUX_ROUND_CLOSEST,
> + },
> + .hw.init = &(struct clk_init_data){
> + .name = "mipi_dsi_pxclk_sel",
> + .ops = &clk_regmap_mux_ops,
> + .parent_hws = g12a_mipi_dsi_pxclk_parent_hws,
> + .num_parents = ARRAY_SIZE(g12a_mipi_dsi_pxclk_parent_hws),
> + .flags = CLK_SET_RATE_PARENT,
The id of the mux is exposed which seems to hint the mux will be
manually controller but CLK_SET_RATE_NO_REPARENT is not set. Is this on
purpose ?
> + },
> +};
> +
> +static struct clk_regmap g12a_mipi_dsi_pxclk_div = {
> + .data = &(struct clk_regmap_div_data){
> + .offset = HHI_MIPIDSI_PHY_CLK_CNTL,
> + .shift = 0,
> + .width = 7,
> + },
> + .hw.init = &(struct clk_init_data){
> + .name = "mipi_dsi_pxclk_div",
> + .ops = &clk_regmap_divider_ops,
> + .parent_hws = (const struct clk_hw *[]) {
> + &g12a_mipi_dsi_pxclk_sel.hw },
Alignment here is weird compared to the reset of the file
> + .num_parents = 1,
> + .flags = CLK_SET_RATE_PARENT,
> + },
> +};
> +
> +static struct clk_regmap g12a_mipi_dsi_pxclk = {
> + .data = &(struct clk_regmap_gate_data){
> + .offset = HHI_MIPIDSI_PHY_CLK_CNTL,
> + .bit_idx = 8,
> + },
> + .hw.init = &(struct clk_init_data) {
> + .name = "mipi_dsi_pxclk",
> + .ops = &clk_regmap_gate_ops,
> + .parent_hws = (const struct clk_hw *[]) {
> + &g12a_mipi_dsi_pxclk_div.hw },
> + .num_parents = 1,
> + .flags = CLK_SET_RATE_PARENT,
> + },
> +};
> +
> /* HDMI Clocks */
>
> static const struct clk_parent_data g12a_hdmi_parent_data[] = {
> @@ -4403,6 +4463,9 @@ static struct clk_hw_onecell_data g12a_hw_onecell_data = {
> [CLKID_SPICC1_SCLK_SEL] = &g12a_spicc1_sclk_sel.hw,
> [CLKID_SPICC1_SCLK_DIV] = &g12a_spicc1_sclk_div.hw,
> [CLKID_SPICC1_SCLK] = &g12a_spicc1_sclk.hw,
> + [CLKID_MIPI_DSI_PXCLK_SEL] = &g12a_mipi_dsi_pxclk_sel.hw,
> + [CLKID_MIPI_DSI_PXCLK_DIV] = &g12a_mipi_dsi_pxclk_div.hw,
> + [CLKID_MIPI_DSI_PXCLK] = &g12a_mipi_dsi_pxclk.hw,
> [NR_CLKS] = NULL,
> },
> .num = NR_CLKS,
> @@ -4658,6 +4721,9 @@ static struct clk_hw_onecell_data g12b_hw_onecell_data = {
> [CLKID_SPICC1_SCLK_SEL] = &g12a_spicc1_sclk_sel.hw,
> [CLKID_SPICC1_SCLK_DIV] = &g12a_spicc1_sclk_div.hw,
> [CLKID_SPICC1_SCLK] = &g12a_spicc1_sclk.hw,
> + [CLKID_MIPI_DSI_PXCLK_SEL] = &g12a_mipi_dsi_pxclk_sel.hw,
> + [CLKID_MIPI_DSI_PXCLK_DIV] = &g12a_mipi_dsi_pxclk_div.hw,
> + [CLKID_MIPI_DSI_PXCLK] = &g12a_mipi_dsi_pxclk.hw,
> [NR_CLKS] = NULL,
> },
> .num = NR_CLKS,
> @@ -4904,6 +4970,9 @@ static struct clk_hw_onecell_data sm1_hw_onecell_data = {
> [CLKID_NNA_CORE_CLK_SEL] = &sm1_nna_core_clk_sel.hw,
> [CLKID_NNA_CORE_CLK_DIV] = &sm1_nna_core_clk_div.hw,
> [CLKID_NNA_CORE_CLK] = &sm1_nna_core_clk.hw,
> + [CLKID_MIPI_DSI_PXCLK_SEL] = &g12a_mipi_dsi_pxclk_sel.hw,
> + [CLKID_MIPI_DSI_PXCLK_DIV] = &g12a_mipi_dsi_pxclk_div.hw,
> + [CLKID_MIPI_DSI_PXCLK] = &g12a_mipi_dsi_pxclk.hw,
> [NR_CLKS] = NULL,
> },
> .num = NR_CLKS,
> @@ -5151,6 +5220,9 @@ static struct clk_regmap *const g12a_clk_regmaps[] = {
> &sm1_nna_core_clk_sel,
> &sm1_nna_core_clk_div,
> &sm1_nna_core_clk,
> + &g12a_mipi_dsi_pxclk_sel,
> + &g12a_mipi_dsi_pxclk_div,
> + &g12a_mipi_dsi_pxclk,
> };
>
> static const struct reg_sequence g12a_init_regs[] = {
> diff --git a/drivers/clk/meson/g12a.h b/drivers/clk/meson/g12a.h
> index 69b6a69549c7..a97613df38b3 100644
> --- a/drivers/clk/meson/g12a.h
> +++ b/drivers/clk/meson/g12a.h
> @@ -264,8 +264,9 @@
> #define CLKID_NNA_AXI_CLK_DIV 263
> #define CLKID_NNA_CORE_CLK_SEL 265
> #define CLKID_NNA_CORE_CLK_DIV 266
> +#define CLKID_MIPI_DSI_PXCLK_DIV 268
>
> -#define NR_CLKS 268
> +#define NR_CLKS 271
>
> /* include the CLKIDs that have been made part of the DT binding */
> #include <dt-bindings/clock/g12a-clkc.h>
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply [flat|nested] 15+ messages in thread
* Re: [PATCH 2/2] clk: meson: g12a: add MIPI DSI Host Pixel Clock
2020-11-25 17:32 ` Jerome Brunet
(?)
@ 2020-11-26 14:08 ` Neil Armstrong
-1 siblings, 0 replies; 15+ messages in thread
From: Neil Armstrong @ 2020-11-26 14:08 UTC (permalink / raw)
To: Jerome Brunet; +Cc: linux-clk, linux-amlogic, linux-arm-kernel, linux-kernel
On 25/11/2020 18:32, Jerome Brunet wrote:
>
> On Mon 23 Nov 2020 at 17:38, Neil Armstrong <narmstrong@baylibre.com> wrote:
>
>> This adds the MIPI DSI Host Pixel Clock, unlike AXG, the pixel clock can be different
>> from the VPU ENCL output clock to feed the DSI Host controller with a different clock rate.
>>
>> Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
>
> Series looks good.
> 2 minor comments below
>
>> ---
>> drivers/clk/meson/g12a.c | 72 ++++++++++++++++++++++++++++++++++++++++
>> drivers/clk/meson/g12a.h | 3 +-
>> 2 files changed, 74 insertions(+), 1 deletion(-)
>>
>> diff --git a/drivers/clk/meson/g12a.c b/drivers/clk/meson/g12a.c
>> index 3cb8196c8e29..3dedf8408405 100644
>> --- a/drivers/clk/meson/g12a.c
>> +++ b/drivers/clk/meson/g12a.c
>> @@ -3658,6 +3658,66 @@ static struct clk_regmap g12a_hdmi_tx = {
>> },
>> };
>>
>> +/* MIPI DSI Host Clocks */
>> +
>> +static const struct clk_hw *g12a_mipi_dsi_pxclk_parent_hws[] = {
>> + &g12a_vid_pll.hw,
>> + &g12a_gp0_pll.hw,
>> + &g12a_hifi_pll.hw,
>> + &g12a_mpll1.hw,
>> + &g12a_fclk_div2.hw,
>> + &g12a_fclk_div2p5.hw,
>> + &g12a_fclk_div3.hw,
>> + &g12a_fclk_div7.hw,
>> +};
>> +
>> +static struct clk_regmap g12a_mipi_dsi_pxclk_sel = {
>> + .data = &(struct clk_regmap_mux_data){
>> + .offset = HHI_MIPIDSI_PHY_CLK_CNTL,
>> + .mask = 0x7,
>> + .shift = 12,
>> + .flags = CLK_MUX_ROUND_CLOSEST,
>> + },
>> + .hw.init = &(struct clk_init_data){
>> + .name = "mipi_dsi_pxclk_sel",
>> + .ops = &clk_regmap_mux_ops,
>> + .parent_hws = g12a_mipi_dsi_pxclk_parent_hws,
>> + .num_parents = ARRAY_SIZE(g12a_mipi_dsi_pxclk_parent_hws),
>> + .flags = CLK_SET_RATE_PARENT,
>
> The id of the mux is exposed which seems to hint the mux will be
> manually controller but CLK_SET_RATE_NO_REPARENT is not set. Is this on
> purpose ?
You're right, it should be CLK_SET_RATE_NO_REPARENT here since we need to
control the source of the clock.
>
>> + },
>> +};
>> +
>> +static struct clk_regmap g12a_mipi_dsi_pxclk_div = {
>> + .data = &(struct clk_regmap_div_data){
>> + .offset = HHI_MIPIDSI_PHY_CLK_CNTL,
>> + .shift = 0,
>> + .width = 7,
>> + },
>> + .hw.init = &(struct clk_init_data){
>> + .name = "mipi_dsi_pxclk_div",
>> + .ops = &clk_regmap_divider_ops,
>> + .parent_hws = (const struct clk_hw *[]) {
>> + &g12a_mipi_dsi_pxclk_sel.hw },
>
> Alignment here is weird compared to the reset of the file
ok
>
>> + .num_parents = 1,
>> + .flags = CLK_SET_RATE_PARENT,
>> + },
>> +};
>> +
>> +static struct clk_regmap g12a_mipi_dsi_pxclk = {
>> + .data = &(struct clk_regmap_gate_data){
>> + .offset = HHI_MIPIDSI_PHY_CLK_CNTL,
>> + .bit_idx = 8,
>> + },
>> + .hw.init = &(struct clk_init_data) {
>> + .name = "mipi_dsi_pxclk",
>> + .ops = &clk_regmap_gate_ops,
>> + .parent_hws = (const struct clk_hw *[]) {
>> + &g12a_mipi_dsi_pxclk_div.hw },
>> + .num_parents = 1,
>> + .flags = CLK_SET_RATE_PARENT,
>> + },
>> +};
>> +
>> /* HDMI Clocks */
>>
>> static const struct clk_parent_data g12a_hdmi_parent_data[] = {
>> @@ -4403,6 +4463,9 @@ static struct clk_hw_onecell_data g12a_hw_onecell_data = {
>> [CLKID_SPICC1_SCLK_SEL] = &g12a_spicc1_sclk_sel.hw,
>> [CLKID_SPICC1_SCLK_DIV] = &g12a_spicc1_sclk_div.hw,
>> [CLKID_SPICC1_SCLK] = &g12a_spicc1_sclk.hw,
>> + [CLKID_MIPI_DSI_PXCLK_SEL] = &g12a_mipi_dsi_pxclk_sel.hw,
>> + [CLKID_MIPI_DSI_PXCLK_DIV] = &g12a_mipi_dsi_pxclk_div.hw,
>> + [CLKID_MIPI_DSI_PXCLK] = &g12a_mipi_dsi_pxclk.hw,
>> [NR_CLKS] = NULL,
>> },
>> .num = NR_CLKS,
>> @@ -4658,6 +4721,9 @@ static struct clk_hw_onecell_data g12b_hw_onecell_data = {
>> [CLKID_SPICC1_SCLK_SEL] = &g12a_spicc1_sclk_sel.hw,
>> [CLKID_SPICC1_SCLK_DIV] = &g12a_spicc1_sclk_div.hw,
>> [CLKID_SPICC1_SCLK] = &g12a_spicc1_sclk.hw,
>> + [CLKID_MIPI_DSI_PXCLK_SEL] = &g12a_mipi_dsi_pxclk_sel.hw,
>> + [CLKID_MIPI_DSI_PXCLK_DIV] = &g12a_mipi_dsi_pxclk_div.hw,
>> + [CLKID_MIPI_DSI_PXCLK] = &g12a_mipi_dsi_pxclk.hw,
>> [NR_CLKS] = NULL,
>> },
>> .num = NR_CLKS,
>> @@ -4904,6 +4970,9 @@ static struct clk_hw_onecell_data sm1_hw_onecell_data = {
>> [CLKID_NNA_CORE_CLK_SEL] = &sm1_nna_core_clk_sel.hw,
>> [CLKID_NNA_CORE_CLK_DIV] = &sm1_nna_core_clk_div.hw,
>> [CLKID_NNA_CORE_CLK] = &sm1_nna_core_clk.hw,
>> + [CLKID_MIPI_DSI_PXCLK_SEL] = &g12a_mipi_dsi_pxclk_sel.hw,
>> + [CLKID_MIPI_DSI_PXCLK_DIV] = &g12a_mipi_dsi_pxclk_div.hw,
>> + [CLKID_MIPI_DSI_PXCLK] = &g12a_mipi_dsi_pxclk.hw,
>> [NR_CLKS] = NULL,
>> },
>> .num = NR_CLKS,
>> @@ -5151,6 +5220,9 @@ static struct clk_regmap *const g12a_clk_regmaps[] = {
>> &sm1_nna_core_clk_sel,
>> &sm1_nna_core_clk_div,
>> &sm1_nna_core_clk,
>> + &g12a_mipi_dsi_pxclk_sel,
>> + &g12a_mipi_dsi_pxclk_div,
>> + &g12a_mipi_dsi_pxclk,
>> };
>>
>> static const struct reg_sequence g12a_init_regs[] = {
>> diff --git a/drivers/clk/meson/g12a.h b/drivers/clk/meson/g12a.h
>> index 69b6a69549c7..a97613df38b3 100644
>> --- a/drivers/clk/meson/g12a.h
>> +++ b/drivers/clk/meson/g12a.h
>> @@ -264,8 +264,9 @@
>> #define CLKID_NNA_AXI_CLK_DIV 263
>> #define CLKID_NNA_CORE_CLK_SEL 265
>> #define CLKID_NNA_CORE_CLK_DIV 266
>> +#define CLKID_MIPI_DSI_PXCLK_DIV 268
>>
>> -#define NR_CLKS 268
>> +#define NR_CLKS 271
>>
>> /* include the CLKIDs that have been made part of the DT binding */
>> #include <dt-bindings/clock/g12a-clkc.h>
>
^ permalink raw reply [flat|nested] 15+ messages in thread
* Re: [PATCH 2/2] clk: meson: g12a: add MIPI DSI Host Pixel Clock
@ 2020-11-26 14:08 ` Neil Armstrong
0 siblings, 0 replies; 15+ messages in thread
From: Neil Armstrong @ 2020-11-26 14:08 UTC (permalink / raw)
To: Jerome Brunet; +Cc: linux-amlogic, linux-clk, linux-arm-kernel, linux-kernel
On 25/11/2020 18:32, Jerome Brunet wrote:
>
> On Mon 23 Nov 2020 at 17:38, Neil Armstrong <narmstrong@baylibre.com> wrote:
>
>> This adds the MIPI DSI Host Pixel Clock, unlike AXG, the pixel clock can be different
>> from the VPU ENCL output clock to feed the DSI Host controller with a different clock rate.
>>
>> Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
>
> Series looks good.
> 2 minor comments below
>
>> ---
>> drivers/clk/meson/g12a.c | 72 ++++++++++++++++++++++++++++++++++++++++
>> drivers/clk/meson/g12a.h | 3 +-
>> 2 files changed, 74 insertions(+), 1 deletion(-)
>>
>> diff --git a/drivers/clk/meson/g12a.c b/drivers/clk/meson/g12a.c
>> index 3cb8196c8e29..3dedf8408405 100644
>> --- a/drivers/clk/meson/g12a.c
>> +++ b/drivers/clk/meson/g12a.c
>> @@ -3658,6 +3658,66 @@ static struct clk_regmap g12a_hdmi_tx = {
>> },
>> };
>>
>> +/* MIPI DSI Host Clocks */
>> +
>> +static const struct clk_hw *g12a_mipi_dsi_pxclk_parent_hws[] = {
>> + &g12a_vid_pll.hw,
>> + &g12a_gp0_pll.hw,
>> + &g12a_hifi_pll.hw,
>> + &g12a_mpll1.hw,
>> + &g12a_fclk_div2.hw,
>> + &g12a_fclk_div2p5.hw,
>> + &g12a_fclk_div3.hw,
>> + &g12a_fclk_div7.hw,
>> +};
>> +
>> +static struct clk_regmap g12a_mipi_dsi_pxclk_sel = {
>> + .data = &(struct clk_regmap_mux_data){
>> + .offset = HHI_MIPIDSI_PHY_CLK_CNTL,
>> + .mask = 0x7,
>> + .shift = 12,
>> + .flags = CLK_MUX_ROUND_CLOSEST,
>> + },
>> + .hw.init = &(struct clk_init_data){
>> + .name = "mipi_dsi_pxclk_sel",
>> + .ops = &clk_regmap_mux_ops,
>> + .parent_hws = g12a_mipi_dsi_pxclk_parent_hws,
>> + .num_parents = ARRAY_SIZE(g12a_mipi_dsi_pxclk_parent_hws),
>> + .flags = CLK_SET_RATE_PARENT,
>
> The id of the mux is exposed which seems to hint the mux will be
> manually controller but CLK_SET_RATE_NO_REPARENT is not set. Is this on
> purpose ?
You're right, it should be CLK_SET_RATE_NO_REPARENT here since we need to
control the source of the clock.
>
>> + },
>> +};
>> +
>> +static struct clk_regmap g12a_mipi_dsi_pxclk_div = {
>> + .data = &(struct clk_regmap_div_data){
>> + .offset = HHI_MIPIDSI_PHY_CLK_CNTL,
>> + .shift = 0,
>> + .width = 7,
>> + },
>> + .hw.init = &(struct clk_init_data){
>> + .name = "mipi_dsi_pxclk_div",
>> + .ops = &clk_regmap_divider_ops,
>> + .parent_hws = (const struct clk_hw *[]) {
>> + &g12a_mipi_dsi_pxclk_sel.hw },
>
> Alignment here is weird compared to the reset of the file
ok
>
>> + .num_parents = 1,
>> + .flags = CLK_SET_RATE_PARENT,
>> + },
>> +};
>> +
>> +static struct clk_regmap g12a_mipi_dsi_pxclk = {
>> + .data = &(struct clk_regmap_gate_data){
>> + .offset = HHI_MIPIDSI_PHY_CLK_CNTL,
>> + .bit_idx = 8,
>> + },
>> + .hw.init = &(struct clk_init_data) {
>> + .name = "mipi_dsi_pxclk",
>> + .ops = &clk_regmap_gate_ops,
>> + .parent_hws = (const struct clk_hw *[]) {
>> + &g12a_mipi_dsi_pxclk_div.hw },
>> + .num_parents = 1,
>> + .flags = CLK_SET_RATE_PARENT,
>> + },
>> +};
>> +
>> /* HDMI Clocks */
>>
>> static const struct clk_parent_data g12a_hdmi_parent_data[] = {
>> @@ -4403,6 +4463,9 @@ static struct clk_hw_onecell_data g12a_hw_onecell_data = {
>> [CLKID_SPICC1_SCLK_SEL] = &g12a_spicc1_sclk_sel.hw,
>> [CLKID_SPICC1_SCLK_DIV] = &g12a_spicc1_sclk_div.hw,
>> [CLKID_SPICC1_SCLK] = &g12a_spicc1_sclk.hw,
>> + [CLKID_MIPI_DSI_PXCLK_SEL] = &g12a_mipi_dsi_pxclk_sel.hw,
>> + [CLKID_MIPI_DSI_PXCLK_DIV] = &g12a_mipi_dsi_pxclk_div.hw,
>> + [CLKID_MIPI_DSI_PXCLK] = &g12a_mipi_dsi_pxclk.hw,
>> [NR_CLKS] = NULL,
>> },
>> .num = NR_CLKS,
>> @@ -4658,6 +4721,9 @@ static struct clk_hw_onecell_data g12b_hw_onecell_data = {
>> [CLKID_SPICC1_SCLK_SEL] = &g12a_spicc1_sclk_sel.hw,
>> [CLKID_SPICC1_SCLK_DIV] = &g12a_spicc1_sclk_div.hw,
>> [CLKID_SPICC1_SCLK] = &g12a_spicc1_sclk.hw,
>> + [CLKID_MIPI_DSI_PXCLK_SEL] = &g12a_mipi_dsi_pxclk_sel.hw,
>> + [CLKID_MIPI_DSI_PXCLK_DIV] = &g12a_mipi_dsi_pxclk_div.hw,
>> + [CLKID_MIPI_DSI_PXCLK] = &g12a_mipi_dsi_pxclk.hw,
>> [NR_CLKS] = NULL,
>> },
>> .num = NR_CLKS,
>> @@ -4904,6 +4970,9 @@ static struct clk_hw_onecell_data sm1_hw_onecell_data = {
>> [CLKID_NNA_CORE_CLK_SEL] = &sm1_nna_core_clk_sel.hw,
>> [CLKID_NNA_CORE_CLK_DIV] = &sm1_nna_core_clk_div.hw,
>> [CLKID_NNA_CORE_CLK] = &sm1_nna_core_clk.hw,
>> + [CLKID_MIPI_DSI_PXCLK_SEL] = &g12a_mipi_dsi_pxclk_sel.hw,
>> + [CLKID_MIPI_DSI_PXCLK_DIV] = &g12a_mipi_dsi_pxclk_div.hw,
>> + [CLKID_MIPI_DSI_PXCLK] = &g12a_mipi_dsi_pxclk.hw,
>> [NR_CLKS] = NULL,
>> },
>> .num = NR_CLKS,
>> @@ -5151,6 +5220,9 @@ static struct clk_regmap *const g12a_clk_regmaps[] = {
>> &sm1_nna_core_clk_sel,
>> &sm1_nna_core_clk_div,
>> &sm1_nna_core_clk,
>> + &g12a_mipi_dsi_pxclk_sel,
>> + &g12a_mipi_dsi_pxclk_div,
>> + &g12a_mipi_dsi_pxclk,
>> };
>>
>> static const struct reg_sequence g12a_init_regs[] = {
>> diff --git a/drivers/clk/meson/g12a.h b/drivers/clk/meson/g12a.h
>> index 69b6a69549c7..a97613df38b3 100644
>> --- a/drivers/clk/meson/g12a.h
>> +++ b/drivers/clk/meson/g12a.h
>> @@ -264,8 +264,9 @@
>> #define CLKID_NNA_AXI_CLK_DIV 263
>> #define CLKID_NNA_CORE_CLK_SEL 265
>> #define CLKID_NNA_CORE_CLK_DIV 266
>> +#define CLKID_MIPI_DSI_PXCLK_DIV 268
>>
>> -#define NR_CLKS 268
>> +#define NR_CLKS 271
>>
>> /* include the CLKIDs that have been made part of the DT binding */
>> #include <dt-bindings/clock/g12a-clkc.h>
>
_______________________________________________
linux-amlogic mailing list
linux-amlogic@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-amlogic
^ permalink raw reply [flat|nested] 15+ messages in thread
* Re: [PATCH 2/2] clk: meson: g12a: add MIPI DSI Host Pixel Clock
@ 2020-11-26 14:08 ` Neil Armstrong
0 siblings, 0 replies; 15+ messages in thread
From: Neil Armstrong @ 2020-11-26 14:08 UTC (permalink / raw)
To: Jerome Brunet; +Cc: linux-amlogic, linux-clk, linux-arm-kernel, linux-kernel
On 25/11/2020 18:32, Jerome Brunet wrote:
>
> On Mon 23 Nov 2020 at 17:38, Neil Armstrong <narmstrong@baylibre.com> wrote:
>
>> This adds the MIPI DSI Host Pixel Clock, unlike AXG, the pixel clock can be different
>> from the VPU ENCL output clock to feed the DSI Host controller with a different clock rate.
>>
>> Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
>
> Series looks good.
> 2 minor comments below
>
>> ---
>> drivers/clk/meson/g12a.c | 72 ++++++++++++++++++++++++++++++++++++++++
>> drivers/clk/meson/g12a.h | 3 +-
>> 2 files changed, 74 insertions(+), 1 deletion(-)
>>
>> diff --git a/drivers/clk/meson/g12a.c b/drivers/clk/meson/g12a.c
>> index 3cb8196c8e29..3dedf8408405 100644
>> --- a/drivers/clk/meson/g12a.c
>> +++ b/drivers/clk/meson/g12a.c
>> @@ -3658,6 +3658,66 @@ static struct clk_regmap g12a_hdmi_tx = {
>> },
>> };
>>
>> +/* MIPI DSI Host Clocks */
>> +
>> +static const struct clk_hw *g12a_mipi_dsi_pxclk_parent_hws[] = {
>> + &g12a_vid_pll.hw,
>> + &g12a_gp0_pll.hw,
>> + &g12a_hifi_pll.hw,
>> + &g12a_mpll1.hw,
>> + &g12a_fclk_div2.hw,
>> + &g12a_fclk_div2p5.hw,
>> + &g12a_fclk_div3.hw,
>> + &g12a_fclk_div7.hw,
>> +};
>> +
>> +static struct clk_regmap g12a_mipi_dsi_pxclk_sel = {
>> + .data = &(struct clk_regmap_mux_data){
>> + .offset = HHI_MIPIDSI_PHY_CLK_CNTL,
>> + .mask = 0x7,
>> + .shift = 12,
>> + .flags = CLK_MUX_ROUND_CLOSEST,
>> + },
>> + .hw.init = &(struct clk_init_data){
>> + .name = "mipi_dsi_pxclk_sel",
>> + .ops = &clk_regmap_mux_ops,
>> + .parent_hws = g12a_mipi_dsi_pxclk_parent_hws,
>> + .num_parents = ARRAY_SIZE(g12a_mipi_dsi_pxclk_parent_hws),
>> + .flags = CLK_SET_RATE_PARENT,
>
> The id of the mux is exposed which seems to hint the mux will be
> manually controller but CLK_SET_RATE_NO_REPARENT is not set. Is this on
> purpose ?
You're right, it should be CLK_SET_RATE_NO_REPARENT here since we need to
control the source of the clock.
>
>> + },
>> +};
>> +
>> +static struct clk_regmap g12a_mipi_dsi_pxclk_div = {
>> + .data = &(struct clk_regmap_div_data){
>> + .offset = HHI_MIPIDSI_PHY_CLK_CNTL,
>> + .shift = 0,
>> + .width = 7,
>> + },
>> + .hw.init = &(struct clk_init_data){
>> + .name = "mipi_dsi_pxclk_div",
>> + .ops = &clk_regmap_divider_ops,
>> + .parent_hws = (const struct clk_hw *[]) {
>> + &g12a_mipi_dsi_pxclk_sel.hw },
>
> Alignment here is weird compared to the reset of the file
ok
>
>> + .num_parents = 1,
>> + .flags = CLK_SET_RATE_PARENT,
>> + },
>> +};
>> +
>> +static struct clk_regmap g12a_mipi_dsi_pxclk = {
>> + .data = &(struct clk_regmap_gate_data){
>> + .offset = HHI_MIPIDSI_PHY_CLK_CNTL,
>> + .bit_idx = 8,
>> + },
>> + .hw.init = &(struct clk_init_data) {
>> + .name = "mipi_dsi_pxclk",
>> + .ops = &clk_regmap_gate_ops,
>> + .parent_hws = (const struct clk_hw *[]) {
>> + &g12a_mipi_dsi_pxclk_div.hw },
>> + .num_parents = 1,
>> + .flags = CLK_SET_RATE_PARENT,
>> + },
>> +};
>> +
>> /* HDMI Clocks */
>>
>> static const struct clk_parent_data g12a_hdmi_parent_data[] = {
>> @@ -4403,6 +4463,9 @@ static struct clk_hw_onecell_data g12a_hw_onecell_data = {
>> [CLKID_SPICC1_SCLK_SEL] = &g12a_spicc1_sclk_sel.hw,
>> [CLKID_SPICC1_SCLK_DIV] = &g12a_spicc1_sclk_div.hw,
>> [CLKID_SPICC1_SCLK] = &g12a_spicc1_sclk.hw,
>> + [CLKID_MIPI_DSI_PXCLK_SEL] = &g12a_mipi_dsi_pxclk_sel.hw,
>> + [CLKID_MIPI_DSI_PXCLK_DIV] = &g12a_mipi_dsi_pxclk_div.hw,
>> + [CLKID_MIPI_DSI_PXCLK] = &g12a_mipi_dsi_pxclk.hw,
>> [NR_CLKS] = NULL,
>> },
>> .num = NR_CLKS,
>> @@ -4658,6 +4721,9 @@ static struct clk_hw_onecell_data g12b_hw_onecell_data = {
>> [CLKID_SPICC1_SCLK_SEL] = &g12a_spicc1_sclk_sel.hw,
>> [CLKID_SPICC1_SCLK_DIV] = &g12a_spicc1_sclk_div.hw,
>> [CLKID_SPICC1_SCLK] = &g12a_spicc1_sclk.hw,
>> + [CLKID_MIPI_DSI_PXCLK_SEL] = &g12a_mipi_dsi_pxclk_sel.hw,
>> + [CLKID_MIPI_DSI_PXCLK_DIV] = &g12a_mipi_dsi_pxclk_div.hw,
>> + [CLKID_MIPI_DSI_PXCLK] = &g12a_mipi_dsi_pxclk.hw,
>> [NR_CLKS] = NULL,
>> },
>> .num = NR_CLKS,
>> @@ -4904,6 +4970,9 @@ static struct clk_hw_onecell_data sm1_hw_onecell_data = {
>> [CLKID_NNA_CORE_CLK_SEL] = &sm1_nna_core_clk_sel.hw,
>> [CLKID_NNA_CORE_CLK_DIV] = &sm1_nna_core_clk_div.hw,
>> [CLKID_NNA_CORE_CLK] = &sm1_nna_core_clk.hw,
>> + [CLKID_MIPI_DSI_PXCLK_SEL] = &g12a_mipi_dsi_pxclk_sel.hw,
>> + [CLKID_MIPI_DSI_PXCLK_DIV] = &g12a_mipi_dsi_pxclk_div.hw,
>> + [CLKID_MIPI_DSI_PXCLK] = &g12a_mipi_dsi_pxclk.hw,
>> [NR_CLKS] = NULL,
>> },
>> .num = NR_CLKS,
>> @@ -5151,6 +5220,9 @@ static struct clk_regmap *const g12a_clk_regmaps[] = {
>> &sm1_nna_core_clk_sel,
>> &sm1_nna_core_clk_div,
>> &sm1_nna_core_clk,
>> + &g12a_mipi_dsi_pxclk_sel,
>> + &g12a_mipi_dsi_pxclk_div,
>> + &g12a_mipi_dsi_pxclk,
>> };
>>
>> static const struct reg_sequence g12a_init_regs[] = {
>> diff --git a/drivers/clk/meson/g12a.h b/drivers/clk/meson/g12a.h
>> index 69b6a69549c7..a97613df38b3 100644
>> --- a/drivers/clk/meson/g12a.h
>> +++ b/drivers/clk/meson/g12a.h
>> @@ -264,8 +264,9 @@
>> #define CLKID_NNA_AXI_CLK_DIV 263
>> #define CLKID_NNA_CORE_CLK_SEL 265
>> #define CLKID_NNA_CORE_CLK_DIV 266
>> +#define CLKID_MIPI_DSI_PXCLK_DIV 268
>>
>> -#define NR_CLKS 268
>> +#define NR_CLKS 271
>>
>> /* include the CLKIDs that have been made part of the DT binding */
>> #include <dt-bindings/clock/g12a-clkc.h>
>
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply [flat|nested] 15+ messages in thread