All of lore.kernel.org
 help / color / mirror / Atom feed
From: Quan Nguyen <quan@os.amperecomputing.com>
To: Joel Stanley <joel@jms.id.au>, openbmc@lists.ozlabs.org
Cc: Open Source Submission <patches@amperecomputing.com>,
	"Thang Q . Nguyen" <thang@os.amperecomputing.com>,
	Phong Vo <phong@os.amperecomputing.com>
Subject: [PATCH 2/2] ARM: dts: aspeed: Add device tree for Ampere's Mt. Jade BMC
Date: Fri, 27 Nov 2020 09:41:58 +0700	[thread overview]
Message-ID: <20201127024158.1486-3-quan@os.amperecomputing.com> (raw)
In-Reply-To: <20201127024158.1486-1-quan@os.amperecomputing.com>

The Mt. Jade BMC is an ASPEED AST2500-based BMC for the Mt. Jade
hardware reference platform with Ampere's Altra Processor Family.

Signed-off-by: Quan Nguyen <quan@os.amperecomputing.com>
Signed-off-by: Phong Vo <phong@os.amperecomputing.com>
Signed-off-by: Thang Q. Nguyen <thang@os.amperecomputing.com>
---
 arch/arm/boot/dts/Makefile                    |   1 +
 .../arm/boot/dts/aspeed-bmc-ampere-mtjade.dts | 568 ++++++++++++++++++
 2 files changed, 569 insertions(+)
 create mode 100644 arch/arm/boot/dts/aspeed-bmc-ampere-mtjade.dts

diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
index 9537b2e5aad6..6d4ae66f8cf7 100644
--- a/arch/arm/boot/dts/Makefile
+++ b/arch/arm/boot/dts/Makefile
@@ -1394,6 +1394,7 @@ dtb-$(CONFIG_ARCH_ASPEED) += \
 	aspeed-ast2500-evb.dtb \
 	aspeed-ast2600-evb.dtb \
 	aspeed-bmc-amd-ethanolx.dtb \
+	aspeed-bmc-ampere-mtjade.dtb \
 	aspeed-bmc-arm-centriq2400-rep.dtb \
 	aspeed-bmc-arm-stardragon4800-rep2.dtb \
 	aspeed-bmc-bytedance-g220a.dtb \
diff --git a/arch/arm/boot/dts/aspeed-bmc-ampere-mtjade.dts b/arch/arm/boot/dts/aspeed-bmc-ampere-mtjade.dts
new file mode 100644
index 000000000000..c89ab60bff74
--- /dev/null
+++ b/arch/arm/boot/dts/aspeed-bmc-ampere-mtjade.dts
@@ -0,0 +1,568 @@
+// SPDX-License-Identifier: GPL-2.0+
+/dts-v1/;
+#include "aspeed-g5.dtsi"
+#include <dt-bindings/gpio/aspeed-gpio.h>
+
+/ {
+	model = "Ampere Mt. Jade BMC";
+	compatible = "ampere,mtjade-bmc", "aspeed,ast2500";
+
+	chosen {
+		stdout-path = &uart5;
+		bootargs = "console=ttyS4,115200 earlyprintk";
+	};
+
+	memory@80000000 {
+		reg = <0x80000000 0x20000000>;
+	};
+
+	reserved-memory {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		vga_memory: framebuffer@9f000000 {
+			no-map;
+			reg = <0x9f000000 0x01000000>; /* 16M */
+		};
+
+		flash_memory: region@98000000 {
+			no-map;
+			reg = <0x98000000 0x04000000>; /* 64M */
+		};
+
+		gfx_memory: framebuffer {
+			size = <0x01000000>;
+			alignment = <0x01000000>;
+			compatible = "shared-dma-pool";
+			reusable;
+		};
+
+		video_engine_memory: jpegbuffer {
+			size = <0x02000000>;	/* 32M */
+			alignment = <0x01000000>;
+			compatible = "shared-dma-pool";
+			reusable;
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		fault {
+			gpios = <&gpio ASPEED_GPIO(B, 6) GPIO_ACTIVE_HIGH>;
+		};
+
+		identify {
+			gpios = <&gpio ASPEED_GPIO(Q, 6) GPIO_ACTIVE_HIGH>;
+		};
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		shutdown_ack {
+			label = "SHUTDOWN_ACK";
+			gpios = <&gpio ASPEED_GPIO(G, 2) GPIO_ACTIVE_LOW>;
+			linux,code = <ASPEED_GPIO(G, 2)>;
+		};
+
+		reboot_ack {
+			label = "REBOOT_ACK";
+			gpios = <&gpio ASPEED_GPIO(J, 3) GPIO_ACTIVE_LOW>;
+			linux,code = <ASPEED_GPIO(J, 3)>;
+		};
+
+		S0_overtemp {
+			label = "S0_OVERTEMP";
+			gpios = <&gpio ASPEED_GPIO(G, 3) GPIO_ACTIVE_LOW>;
+			linux,code = <ASPEED_GPIO(G, 3)>;
+		};
+
+		S0_hightemp {
+			label = "S0_HIGHTEMP";
+			gpios = <&gpio ASPEED_GPIO(J, 0) GPIO_ACTIVE_LOW>;
+			linux,code = <ASPEED_GPIO(J, 0)>;
+		};
+
+		S0_cpu_fault {
+			label = "S0_CPU_FAULT";
+			gpios = <&gpio ASPEED_GPIO(J, 1) GPIO_ACTIVE_HIGH>;
+			linux,code = <ASPEED_GPIO(J, 1)>;
+		};
+
+		S1_overtemp {
+			label = "S1_OVERTEMP";
+			gpios = <&gpio ASPEED_GPIO(Z, 6) GPIO_ACTIVE_LOW>;
+			linux,code = <ASPEED_GPIO(Z, 6)>;
+		};
+
+		S1_hightemp {
+			label = "S1_HIGHTEMP";
+			gpios = <&gpio ASPEED_GPIO(AB, 0) GPIO_ACTIVE_LOW>;
+			linux,code = <ASPEED_GPIO(AB, 0)>;
+		};
+
+		S1_cpu_fault {
+			label = "S1_CPU_FAULT";
+			gpios = <&gpio ASPEED_GPIO(Z, 1) GPIO_ACTIVE_HIGH>;
+			linux,code = <ASPEED_GPIO(Z, 1)>;
+		};
+
+		id_button {
+			label = "ID_BUTTON";
+			gpios = <&gpio ASPEED_GPIO(Q, 5) GPIO_ACTIVE_LOW>;
+			linux,code = <ASPEED_GPIO(Q, 5)>;
+		};
+
+	};
+
+	gpioA0mux: mux-controller {
+		compatible = "gpio-mux";
+		#mux-control-cells = <0>;
+		mux-gpios = <&gpio ASPEED_GPIO(A, 0) GPIO_ACTIVE_LOW>;
+	};
+
+	adc0mux: adc0mux {
+		compatible = "io-channel-mux";
+		io-channels = <&adc 0>;
+		#io-channel-cells = <1>;
+		io-channel-names = "parent";
+		mux-controls = <&gpioA0mux>;
+		channels = "s0", "s1";
+	};
+
+	adc1mux: adc1mux {
+		compatible = "io-channel-mux";
+		io-channels = <&adc 1>;
+		#io-channel-cells = <1>;
+		io-channel-names = "parent";
+		mux-controls = <&gpioA0mux>;
+		channels = "s0", "s1";
+	};
+
+	adc2mux: adc2mux {
+		compatible = "io-channel-mux";
+		io-channels = <&adc 2>;
+		#io-channel-cells = <1>;
+		io-channel-names = "parent";
+		mux-controls = <&gpioA0mux>;
+		channels = "s0", "s1";
+	};
+
+	adc3mux: adc3mux {
+		compatible = "io-channel-mux";
+		io-channels = <&adc 3>;
+		#io-channel-cells = <1>;
+		io-channel-names = "parent";
+		mux-controls = <&gpioA0mux>;
+		channels = "s0", "s1";
+	};
+
+	adc4mux: adc4mux {
+		compatible = "io-channel-mux";
+		io-channels = <&adc 4>;
+		#io-channel-cells = <1>;
+		io-channel-names = "parent";
+		mux-controls = <&gpioA0mux>;
+		channels = "s0", "s1";
+	};
+
+	adc5mux: adc5mux {
+		compatible = "io-channel-mux";
+		io-channels = <&adc 5>;
+		#io-channel-cells = <1>;
+		io-channel-names = "parent";
+		mux-controls = <&gpioA0mux>;
+		channels = "s0", "s1";
+	};
+
+	adc6mux: adc6mux {
+		compatible = "io-channel-mux";
+		io-channels = <&adc 6>;
+		#io-channel-cells = <1>;
+		io-channel-names = "parent";
+		mux-controls = <&gpioA0mux>;
+		channels = "s0", "s1";
+	};
+
+	adc7mux: adc7mux {
+		compatible = "io-channel-mux";
+		io-channels = <&adc 7>;
+		#io-channel-cells = <1>;
+		io-channel-names = "parent";
+		mux-controls = <&gpioA0mux>;
+		channels = "s0", "s1";
+	};
+
+	adc8mux: adc8mux {
+		compatible = "io-channel-mux";
+		io-channels = <&adc 8>;
+		#io-channel-cells = <1>;
+		io-channel-names = "parent";
+		mux-controls = <&gpioA0mux>;
+		channels = "s0", "s1";
+	};
+
+	adc9mux: adc9mux {
+		compatible = "io-channel-mux";
+		io-channels = <&adc 9>;
+		#io-channel-cells = <1>;
+		io-channel-names = "parent";
+		mux-controls = <&gpioA0mux>;
+		channels = "s0", "s1";
+	};
+
+	adc10mux: adc10mux {
+		compatible = "io-channel-mux";
+		io-channels = <&adc 10>;
+		#io-channel-cells = <1>;
+		io-channel-names = "parent";
+		mux-controls = <&gpioA0mux>;
+		channels = "s0", "s1";
+	};
+
+	adc11mux: adc11mux {
+		compatible = "io-channel-mux";
+		io-channels = <&adc 11>;
+		#io-channel-cells = <1>;
+		io-channel-names = "parent";
+		mux-controls = <&gpioA0mux>;
+		channels = "s0", "s1";
+	};
+
+	adc12mux: adc12mux {
+		compatible = "io-channel-mux";
+		io-channels = <&adc 12>;
+		#io-channel-cells = <1>;
+		io-channel-names = "parent";
+		mux-controls = <&gpioA0mux>;
+		channels = "s0", "s1";
+	};
+
+	adc13mux: adc13mux {
+		compatible = "io-channel-mux";
+		io-channels = <&adc 13>;
+		#io-channel-cells = <1>;
+		io-channel-names = "parent";
+		mux-controls = <&gpioA0mux>;
+		channels = "s0", "s1";
+	};
+
+	iio-hwmon {
+		compatible = "iio-hwmon";
+		io-channels = <&adc0mux 0>, <&adc0mux 1>,
+			<&adc1mux 0>, <&adc1mux 1>,
+			<&adc2mux 0>, <&adc2mux 1>,
+			<&adc3mux 0>, <&adc3mux 1>,
+			<&adc4mux 0>, <&adc4mux 1>,
+			<&adc5mux 0>, <&adc5mux 1>,
+			<&adc6mux 0>, <&adc6mux 1>,
+			<&adc7mux 0>, <&adc7mux 1>,
+			<&adc8mux 0>, <&adc8mux 1>,
+			<&adc9mux 0>, <&adc9mux 1>,
+			<&adc10mux 0>, <&adc10mux 1>,
+			<&adc11mux 0>, <&adc11mux 1>,
+			<&adc12mux 0>, <&adc12mux 1>,
+			<&adc13mux 0>, <&adc13mux 1>;
+	};
+
+	iio-hwmon-adc14 {
+		compatible = "iio-hwmon";
+		io-channels = <&adc 14>;
+	};
+
+	iio-hwmon-battery {
+		compatible = "iio-hwmon";
+		io-channels = <&adc 15>;
+	};
+};
+
+&fmc {
+	status = "okay";
+	flash@0 {
+		status = "okay";
+		m25p,fast-read;
+		label = "bmc";
+		/* spi-max-frequency = <50000000>; */
+#include "openbmc-flash-layout.dtsi"
+	};
+};
+
+&spi1 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_spi1_default>;
+
+	flash@0 {
+		status = "okay";
+		m25p,fast-read;
+		label = "pnor";
+		/* spi-max-frequency = <100000000>; */
+	};
+};
+
+&uart1 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_txd1_default
+			 &pinctrl_rxd1_default
+			 &pinctrl_ncts1_default
+			 &pinctrl_nrts1_default>;
+};
+
+&uart2 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_txd2_default
+			 &pinctrl_rxd2_default>;
+};
+
+&uart3 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_txd3_default
+			 &pinctrl_rxd3_default>;
+};
+
+&uart4 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_txd4_default
+			 &pinctrl_rxd4_default>;
+};
+
+/* The BMC's uart */
+&uart5 {
+	status = "okay";
+};
+
+&mac0 {
+	status = "disabled";
+};
+
+&mac1 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_rgmii2_default &pinctrl_mdio2_default>;
+};
+
+&i2c0 {
+	status = "okay";
+};
+
+&i2c1 {
+	status = "okay";
+};
+
+&i2c2 {
+	status = "okay";
+};
+
+&i2c3 {
+	status = "okay";
+	eeprom@50 {
+		compatible = "microchip,24c64", "atmel,24c64";
+		reg = <0x50>;
+		pagesize = <32>;
+	};
+
+	inlet_mem2: tmp175@28 {
+		compatible = "ti,tmp175";
+		reg = <0x28>;
+	};
+
+	inlet_cpu: tmp175@29 {
+		compatible = "ti,tmp175";
+		reg = <0x29>;
+	};
+
+	inlet_mem1: tmp175@2a {
+		compatible = "ti,tmp175";
+		reg = <0x2a>;
+	};
+
+	outlet_cpu: tmp175@2b {
+		compatible = "ti,tmp175";
+		reg = <0x2b>;
+	};
+
+	outlet1: tmp175@2c {
+		compatible = "ti,tmp175";
+		reg = <0x2c>;
+	};
+
+	outlet2: tmp175@2d {
+		compatible = "ti,tmp175";
+		reg = <0x2d>;
+	};
+};
+
+&i2c4 {
+	status = "okay";
+	rtc@51 {
+		compatible = "nxp,pcf85063a";
+		reg = <0x51>;
+	};
+};
+
+&i2c5 {
+	status = "okay";
+};
+
+&i2c6 {
+	status = "okay";
+	psu@58 {
+		compatible = "pmbus";
+		reg = <0x58>;
+	};
+
+	psu@59 {
+		compatible = "pmbus";
+		reg = <0x59>;
+	};
+};
+
+&i2c7 {
+	status = "okay";
+};
+
+&i2c8 {
+	status = "okay";
+};
+
+&i2c9 {
+	status = "okay";
+};
+
+&gfx {
+	status = "okay";
+	memory-region = <&gfx_memory>;
+};
+
+&pinctrl {
+	aspeed,external-nodes = <&gfx &lhc>;
+};
+
+&pwm_tacho {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm2_default &pinctrl_pwm3_default
+			&pinctrl_pwm4_default &pinctrl_pwm5_default
+			&pinctrl_pwm6_default &pinctrl_pwm7_default>;
+
+	fan@0 {
+		reg = <0x02>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x04>;
+	};
+
+	fan@1 {
+		reg = <0x02>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x05>;
+	};
+
+	fan@2 {
+		reg = <0x03>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x06>;
+	};
+
+	fan@3 {
+		reg = <0x03>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x07>;
+	};
+
+	fan@4 {
+		reg = <0x04>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x08>;
+	};
+
+	fan@5 {
+		reg = <0x04>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x09>;
+	};
+
+	fan@6 {
+		reg = <0x05>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x0a>;
+	};
+
+	fan@7 {
+		reg = <0x05>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x0b>;
+	};
+
+	fan@8 {
+		reg = <0x06>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x0c>;
+	};
+
+	fan@9 {
+		reg = <0x06>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x0d>;
+	};
+
+	fan@10 {
+		reg = <0x07>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x0e>;
+	};
+
+	fan@11 {
+		reg = <0x07>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x0f>;
+	};
+
+};
+
+&vhub {
+	status = "okay";
+};
+
+&adc {
+	status = "okay";
+};
+
+&video {
+	status = "okay";
+	memory-region = <&video_engine_memory>;
+};
+
+&gpio {
+	gpio-line-names =
+	/*A0-A7*/	"","","","S0_BMC_SPECIAL_BOOT","","","","",
+	/*B0-B7*/	"BMC_SELECT_EEPROM","","","",
+			"POWER_BUTTON","","","",
+	/*C0-C7*/	"","","","","","","","",
+	/*D0-D7*/	"","","","","","","","",
+	/*E0-E7*/	"","","","","","","","",
+	/*F0-F7*/	"","","BMC_SYS_PSON_L","S0_DDR_SAVE","PGOOD",
+			"S1_DDR_SAVE","","",
+	/*G0-G7*/	"S0_FW_BOOT_OK","SHD_REQ_L","","S0_OVERTEMP_L","","",
+			"","",
+	/*H0-H7*/	"","","","","","","","",
+	/*I0-I7*/	"","","S1_BMC_SPECIAL_BOOT","","","","","",
+	/*J0-J7*/	"S0_HIGHTEMP_L","S0_FAULT_L","S0_SCP_AUTH_FAIL_L","",
+			"","","","",
+	/*K0-K7*/	"","","","","","","","",
+	/*L0-L7*/       "","","","BMC_SYSRESET_L","SPI_AUTH_FAIL_L","","","",
+	/*M0-M7*/	"","","","","","","","",
+	/*N0-N7*/	"","","","","","","","",
+	/*O0-O7*/	"","","","","","","","",
+	/*P0-P7*/	"","","","","","","","",
+	/*Q0-Q7*/	"","","","","","UID_BUTTON","","",
+	/*R0-R7*/	"","","BMC_EXT_HIGHTEMP_L","","","RESET_BUTTON","","",
+	/*S0-S7*/	"","","","","","","","",
+	/*T0-T7*/	"","","","","","","","",
+	/*U0-U7*/	"","","","","","","","",
+	/*V0-V7*/	"","","","","","","","",
+	/*W0-W7*/	"","","","","","","","",
+	/*X0-X7*/	"","","","","","","","",
+	/*Y0-Y7*/	"","","","","","","","",
+	/*Z0-Z7*/	"S0_BMC_PLIMIT","S1_FAULT_L","S1_FW_BOOT_OK","","",
+			"S1_SCP_AUTH_FAIL_L","S1_OVERTEMP_L","",
+	/*AA0-AA7*/	"","","","","","","","",
+	/*AB0-AB7*/	"S1_HIGHTEMP_L","S1_BMC_PLIMIT","S0_BMC_DDR_ADDR",
+			"S1_BMC_DDR_ADR","","","","",
+	/*AC0-AC7*/	"SYS_PWR_GD","","","","","BMC_READY","SLAVE_PRESENT_L",
+			"BMC_OCP_PG";
+};
+
-- 
2.28.0


  parent reply	other threads:[~2020-11-27  2:46 UTC|newest]

Thread overview: 15+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2020-11-27  2:41 [PATCH 0/2] ARM: dts: aspeed: Add Ampere Mt. Jade BMC device Quan Nguyen
2020-11-27  2:41 ` [PATCH 1/2] dt-bindings: vendor-prefixes: Add an entry for AmpereComputing.com Quan Nguyen
2020-11-27  3:26   ` Joel Stanley
2020-11-30  1:38     ` Quan Nguyen OS
2020-11-27  2:41 ` Quan Nguyen [this message]
2020-11-27  3:35   ` [PATCH 2/2] ARM: dts: aspeed: Add device tree for Ampere's Mt. Jade BMC Joel Stanley
2020-11-30  1:46     ` Quan Nguyen OS
2020-12-08  4:36 [PATCH 0/2] ARM: dts: aspeed: Add Ampere Mt. Jade BMC device Quan Nguyen
2020-12-08  4:37 ` [PATCH 2/2] ARM: dts: aspeed: Add device tree for Ampere's Mt. Jade BMC Quan Nguyen
2020-12-08  4:37   ` Quan Nguyen
2020-12-08  4:41   ` Joel Stanley
2020-12-08  4:41     ` Joel Stanley
2020-12-08  8:08     ` Krzysztof Kozlowski
2020-12-08  8:08       ` Krzysztof Kozlowski
2020-12-09  2:19       ` Joel Stanley
2020-12-09  2:19         ` Joel Stanley

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20201127024158.1486-3-quan@os.amperecomputing.com \
    --to=quan@os.amperecomputing.com \
    --cc=joel@jms.id.au \
    --cc=openbmc@lists.ozlabs.org \
    --cc=patches@amperecomputing.com \
    --cc=phong@os.amperecomputing.com \
    --cc=thang@os.amperecomputing.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.