[PATCH] dt-bindings: phy: bcm-ns-usb3-phy: convert to yaml

[PATCH] dt-bindings: phy: bcm-ns-usb3-phy: convert to yaml

[Rafał Miłecki]

From: Rafał Miłecki <rafal@milecki.pl>

1. Change syntax from txt to yaml
2. Drop "Driver for" from the title
3. Drop "reg = <0x0>;" from example (noticed by dt_binding_check)
4. Specify license

Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
---
I think this should go through linux-phy tree. Kishon, Vinod, can you
take this patch?

This patch generates a false positive checkpatch.pl warning [0].
Please ignore:
WARNING: DT binding docs and includes should be a separate patch. See: Documentation/devicetree/bindings/submitting-patches.rst

[0] https://lkml.org/lkml/2020/2/18/1084
---
 .../bindings/phy/bcm-ns-usb3-phy.txt          | 34 ----------
 .../bindings/phy/bcm-ns-usb3-phy.yaml         | 62 +++++++++++++++++++
 2 files changed, 62 insertions(+), 34 deletions(-)
 delete mode 100644 Documentation/devicetree/bindings/phy/bcm-ns-usb3-phy.txt
 create mode 100644 Documentation/devicetree/bindings/phy/bcm-ns-usb3-phy.yaml

diff --git a/Documentation/devicetree/bindings/phy/bcm-ns-usb3-phy.txt b/Documentation/devicetree/bindings/phy/bcm-ns-usb3-phy.txt
deleted file mode 100644
index 32f057260351..000000000000
--- a/Documentation/devicetree/bindings/phy/bcm-ns-usb3-phy.txt
+++ /dev/null
@@ -1,34 +0,0 @@
-Driver for Broadcom Northstar USB 3.0 PHY
-
-Required properties:
-
-- compatible: one of: "brcm,ns-ax-usb3-phy", "brcm,ns-bx-usb3-phy".
-- reg: address of MDIO bus device
-- usb3-dmp-syscon: phandle to syscon with DMP (Device Management Plugin)
-		   registers
-- #phy-cells: must be 0
-
-Initialization of USB 3.0 PHY depends on Northstar version. There are currently
-three known series: Ax, Bx and Cx.
-Known A0: BCM4707 rev 0
-Known B0: BCM4707 rev 4, BCM53573 rev 2
-Known B1: BCM4707 rev 6
-Known C0: BCM47094 rev 0
-
-Example:
-	mdio: mdio@0 {
-		reg = <0x0>;
-		#size-cells = <1>;
-		#address-cells = <0>;
-
-		usb3-phy@10 {
-			compatible = "brcm,ns-ax-usb3-phy";
-			reg = <0x10>;
-			usb3-dmp-syscon = <&usb3_dmp>;
-			#phy-cells = <0>;
-		};
-	};
-
-	usb3_dmp: syscon@18105000 {
-		reg = <0x18105000 0x1000>;
-	};
diff --git a/Documentation/devicetree/bindings/phy/bcm-ns-usb3-phy.yaml b/Documentation/devicetree/bindings/phy/bcm-ns-usb3-phy.yaml
new file mode 100644
index 000000000000..7fd419db45d0
--- /dev/null
+++ b/Documentation/devicetree/bindings/phy/bcm-ns-usb3-phy.yaml
@@ -0,0 +1,62 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/phy/bcm-ns-usb3-phy.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Broadcom Northstar USB 3.0 PHY
+
+description: |
+  Initialization of USB 3.0 PHY depends on Northstar version. There are currently
+  three known series: Ax, Bx and Cx.
+  Known A0: BCM4707 rev 0
+  Known B0: BCM4707 rev 4, BCM53573 rev 2
+  Known B1: BCM4707 rev 6
+  Known C0: BCM47094 rev 0
+
+maintainers:
+  - Rafał Miłecki <rafal@milecki.pl>
+
+properties:
+  compatible:
+    enum:
+      - brcm,ns-ax-usb3-phy
+      - brcm,ns-bx-usb3-phy
+
+  reg:
+    description: address of MDIO bus device
+    maxItems: 1
+
+  usb3-dmp-syscon:
+    $ref: /schemas/types.yaml#/definitions/phandle
+    description:
+      Phandle to the DMP (Device Management Plugin) syscon
+
+  "#phy-cells":
+    const: 0
+
+required:
+  - compatible
+  - reg
+  - usb3-dmp-syscon
+  - "#phy-cells"
+
+additionalProperties: false
+
+examples:
+  - |
+    mdio {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        usb3-phy@10 {
+            compatible = "brcm,ns-ax-usb3-phy";
+            reg = <0x10>;
+            usb3-dmp-syscon = <&usb3_dmp>;
+            #phy-cells = <0>;
+        };
+    };
+
+    usb3_dmp: syscon@18105000 {
+        reg = <0x18105000 0x1000>;
+    };
-- 
2.27.0

[PATCH] dt-bindings: phy: bcm-ns-usb2-phy: convert to yaml

[Rafał Miłecki]

From: Rafał Miłecki <rafal@milecki.pl>

1. Convert from txt to yaml
2. Drop "Driver for" from the title
3. Document "#phy-cells"
4. Fix example node name (noticed by dt_binding_check)
5. Add #include to example (noticed by dt_binding_check)
6. Specify license

Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
---
I think this should go through linux-phy tree. Kishon, Vinod, can you
take this patch?

This patch generates a false positive checkpatch.pl warning [0].
Please ignore:
WARNING: DT binding docs and includes should be a separate patch. See: Documentation/devicetree/bindings/submitting-patches.rst

[0] https://lkml.org/lkml/2020/2/18/1084
---
 .../bindings/phy/bcm-ns-usb2-phy.txt          | 21 -------
 .../bindings/phy/bcm-ns-usb2-phy.yaml         | 59 +++++++++++++++++++
 2 files changed, 59 insertions(+), 21 deletions(-)
 delete mode 100644 Documentation/devicetree/bindings/phy/bcm-ns-usb2-phy.txt
 create mode 100644 Documentation/devicetree/bindings/phy/bcm-ns-usb2-phy.yaml

diff --git a/Documentation/devicetree/bindings/phy/bcm-ns-usb2-phy.txt b/Documentation/devicetree/bindings/phy/bcm-ns-usb2-phy.txt
deleted file mode 100644
index a7aee9ea8926..000000000000
--- a/Documentation/devicetree/bindings/phy/bcm-ns-usb2-phy.txt
+++ /dev/null
@@ -1,21 +0,0 @@
-Driver for Broadcom Northstar USB 2.0 PHY
-
-Required properties:
-- compatible: brcm,ns-usb2-phy
-- reg: iomem address range of DMU (Device Management Unit)
-- reg-names: "dmu", the only needed & supported reg right now
-- clocks: USB PHY reference clock
-- clock-names: "phy-ref-clk", the only needed & supported clock right now
-
-To initialize USB 2.0 PHY driver needs to setup PLL correctly. To do this it
-requires passing phandle to the USB PHY reference clock.
-
-Example:
-	usb2-phy {
-		compatible = "brcm,ns-usb2-phy";
-		reg = <0x1800c000 0x1000>;
-		reg-names = "dmu";
-		#phy-cells = <0>;
-		clocks = <&genpll BCM_NSP_GENPLL_USB_PHY_REF_CLK>;
-		clock-names = "phy-ref-clk";
-	};
diff --git a/Documentation/devicetree/bindings/phy/bcm-ns-usb2-phy.yaml b/Documentation/devicetree/bindings/phy/bcm-ns-usb2-phy.yaml
new file mode 100644
index 000000000000..05b4dcd80019
--- /dev/null
+++ b/Documentation/devicetree/bindings/phy/bcm-ns-usb2-phy.yaml
@@ -0,0 +1,59 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/phy/bcm-ns-usb2-phy.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Broadcom Northstar USB 2.0 PHY
+
+description: >
+  To initialize USB 2.0 PHY driver needs to setup PLL correctly.
+  To do this it requires passing phandle to the USB PHY reference clock.
+
+maintainers:
+  - Rafał Miłecki <rafal@milecki.pl>
+
+properties:
+  compatible:
+    const: brcm,ns-usb2-phy
+
+  reg:
+    items:
+      - description: iomem address range of DMU (Device Management Unit)
+
+  reg-names:
+    items:
+      - const: dmu
+
+  clocks:
+    items:
+      - description: USB PHY reference clock
+
+  clock-names:
+    items:
+      - const: phy-ref-clk
+
+  "#phy-cells":
+    const: 0
+
+required:
+  - compatible
+  - reg
+  - reg-names
+  - clocks
+  - clock-names
+  - "#phy-cells"
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/bcm-nsp.h>
+    phy@1800c000 {
+        compatible = "brcm,ns-usb2-phy";
+        reg = <0x1800c000 0x1000>;
+        reg-names = "dmu";
+        clocks = <&genpll BCM_NSP_GENPLL_USB_PHY_REF_CLK>;
+        clock-names = "phy-ref-clk";
+        #phy-cells = <0>;
+    };
-- 
2.27.0

Re: [PATCH] dt-bindings: phy: bcm-ns-usb3-phy: convert to yaml

[Vinod Koul]

On 16-11-20, 08:46, Rafał Miłecki wrote:
> From: Rafał Miłecki <rafal@milecki.pl>
> 
> 1. Change syntax from txt to yaml
> 2. Drop "Driver for" from the title
> 3. Drop "reg = <0x0>;" from example (noticed by dt_binding_check)
> 4. Specify license

You missed Ccing Rob

> 
> Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
> ---
> I think this should go through linux-phy tree. Kishon, Vinod, can you
> take this patch?
> 
> This patch generates a false positive checkpatch.pl warning [0].
> Please ignore:
> WARNING: DT binding docs and includes should be a separate patch. See: Documentation/devicetree/bindings/submitting-patches.rst

That is okay, it is a warning ;-)

> 
> [0] https://lkml.org/lkml/2020/2/18/1084
> ---
>  .../bindings/phy/bcm-ns-usb3-phy.txt          | 34 ----------
>  .../bindings/phy/bcm-ns-usb3-phy.yaml         | 62 +++++++++++++++++++
>  2 files changed, 62 insertions(+), 34 deletions(-)
>  delete mode 100644 Documentation/devicetree/bindings/phy/bcm-ns-usb3-phy.txt
>  create mode 100644 Documentation/devicetree/bindings/phy/bcm-ns-usb3-phy.yaml
> 
> diff --git a/Documentation/devicetree/bindings/phy/bcm-ns-usb3-phy.txt b/Documentation/devicetree/bindings/phy/bcm-ns-usb3-phy.txt
> deleted file mode 100644
> index 32f057260351..000000000000
> --- a/Documentation/devicetree/bindings/phy/bcm-ns-usb3-phy.txt
> +++ /dev/null
> @@ -1,34 +0,0 @@
> -Driver for Broadcom Northstar USB 3.0 PHY
> -
> -Required properties:
> -
> -- compatible: one of: "brcm,ns-ax-usb3-phy", "brcm,ns-bx-usb3-phy".
> -- reg: address of MDIO bus device
> -- usb3-dmp-syscon: phandle to syscon with DMP (Device Management Plugin)
> -		   registers
> -- #phy-cells: must be 0
> -
> -Initialization of USB 3.0 PHY depends on Northstar version. There are currently
> -three known series: Ax, Bx and Cx.
> -Known A0: BCM4707 rev 0
> -Known B0: BCM4707 rev 4, BCM53573 rev 2
> -Known B1: BCM4707 rev 6
> -Known C0: BCM47094 rev 0
> -
> -Example:
> -	mdio: mdio@0 {
> -		reg = <0x0>;
> -		#size-cells = <1>;
> -		#address-cells = <0>;
> -
> -		usb3-phy@10 {
> -			compatible = "brcm,ns-ax-usb3-phy";
> -			reg = <0x10>;
> -			usb3-dmp-syscon = <&usb3_dmp>;
> -			#phy-cells = <0>;
> -		};
> -	};
> -
> -	usb3_dmp: syscon@18105000 {
> -		reg = <0x18105000 0x1000>;
> -	};
> diff --git a/Documentation/devicetree/bindings/phy/bcm-ns-usb3-phy.yaml b/Documentation/devicetree/bindings/phy/bcm-ns-usb3-phy.yaml
> new file mode 100644
> index 000000000000..7fd419db45d0
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/phy/bcm-ns-usb3-phy.yaml
> @@ -0,0 +1,62 @@
> +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/phy/bcm-ns-usb3-phy.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: Broadcom Northstar USB 3.0 PHY
> +
> +description: |
> +  Initialization of USB 3.0 PHY depends on Northstar version. There are currently
> +  three known series: Ax, Bx and Cx.
> +  Known A0: BCM4707 rev 0
> +  Known B0: BCM4707 rev 4, BCM53573 rev 2
> +  Known B1: BCM4707 rev 6
> +  Known C0: BCM47094 rev 0
> +
> +maintainers:
> +  - Rafał Miłecki <rafal@milecki.pl>
> +
> +properties:
> +  compatible:
> +    enum:
> +      - brcm,ns-ax-usb3-phy
> +      - brcm,ns-bx-usb3-phy
> +
> +  reg:
> +    description: address of MDIO bus device
> +    maxItems: 1
> +
> +  usb3-dmp-syscon:
> +    $ref: /schemas/types.yaml#/definitions/phandle
> +    description:
> +      Phandle to the DMP (Device Management Plugin) syscon
> +
> +  "#phy-cells":
> +    const: 0
> +
> +required:
> +  - compatible
> +  - reg
> +  - usb3-dmp-syscon
> +  - "#phy-cells"
> +
> +additionalProperties: false
> +
> +examples:
> +  - |
> +    mdio {
> +        #address-cells = <1>;
> +        #size-cells = <0>;
> +
> +        usb3-phy@10 {
> +            compatible = "brcm,ns-ax-usb3-phy";
> +            reg = <0x10>;
> +            usb3-dmp-syscon = <&usb3_dmp>;
> +            #phy-cells = <0>;
> +        };
> +    };
> +
> +    usb3_dmp: syscon@18105000 {
> +        reg = <0x18105000 0x1000>;
> +    };
> -- 
> 2.27.0

-- 
~Vinod

Re: [PATCH] dt-bindings: phy: bcm-ns-usb3-phy: convert to yaml

[Vinod Koul]

On 16-11-20, 08:46, Rafał Miłecki wrote:
> From: Rafał Miłecki <rafal@milecki.pl>
> 
> 1. Change syntax from txt to yaml
> 2. Drop "Driver for" from the title
> 3. Drop "reg = <0x0>;" from example (noticed by dt_binding_check)
> 4. Specify license
> 
> Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
> ---
> I think this should go through linux-phy tree. Kishon, Vinod, can you
> take this patch?
> 
> This patch generates a false positive checkpatch.pl warning [0].
> Please ignore:
> WARNING: DT binding docs and includes should be a separate patch. See: Documentation/devicetree/bindings/submitting-patches.rst

I am seeing warnings for indentation:

Documentation/devicetree/bindings/phy/brcm,sata-phy.yaml:19:9: [warning] wrong indentation: expected 10 but found 8 (indentation)
Documentation/devicetree/bindings/phy/brcm,sata-phy.yaml:20:12: [warning] wrong indentation: expected 12 but found 11 (indentation)
Documentation/devicetree/bindings/phy/brcm,sata-phy.yaml:26:9: [warning] wrong indentation: expected 10 but found 8 (indentation)
Documentation/devicetree/bindings/phy/brcm,sata-phy.yaml:28:9: [warning] wrong indentation: expected 10 but found 8 (indentation)
Documentation/devicetree/bindings/phy/brcm,sata-phy.yaml:30:9: [warning] wrong indentation: expected 10 but found 8 (indentation)
Documentation/devicetree/bindings/phy/brcm,sata-phy.yaml:51:6: [warning] wrong indentation: expected 4 but found 5 (indentation)
Documentation/devicetree/bindings/phy/brcm,sata-phy.yaml:71:11: [warning] wrong indentation: expected 9 but found 10 (indentation)
Documentation/devicetree/bindings/phy/brcm,sata-phy.yaml:80:11: [warning] wrong indentation: expected 9 but found 10 (indentation)
Documentation/devicetree/bindings/phy/brcm,sata-phy.yaml:88:11: [warning] wrong indentation: expected 9 but found 10 (indentation)

Can you pls fix those as well

-- 
~Vinod

Re: [PATCH] dt-bindings: phy: bcm-ns-usb3-phy: convert to yaml

[Rafał Miłecki]

On 30.11.2020 16:43, Vinod Koul wrote:
> On 16-11-20, 08:46, Rafał Miłecki wrote:
>> From: Rafał Miłecki <rafal@milecki.pl>
>>
>> 1. Change syntax from txt to yaml
>> 2. Drop "Driver for" from the title
>> 3. Drop "reg = <0x0>;" from example (noticed by dt_binding_check)
>> 4. Specify license
>>
>> Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
>> ---
>> I think this should go through linux-phy tree. Kishon, Vinod, can you
>> take this patch?
>>
>> This patch generates a false positive checkpatch.pl warning [0].
>> Please ignore:
>> WARNING: DT binding docs and includes should be a separate patch. See: Documentation/devicetree/bindings/submitting-patches.rst
> 
> I am seeing warnings for indentation:
> 
> Documentation/devicetree/bindings/phy/brcm,sata-phy.yaml:19:9: [warning] wrong indentation: expected 10 but found 8 (indentation)
> Documentation/devicetree/bindings/phy/brcm,sata-phy.yaml:20:12: [warning] wrong indentation: expected 12 but found 11 (indentation)
> Documentation/devicetree/bindings/phy/brcm,sata-phy.yaml:26:9: [warning] wrong indentation: expected 10 but found 8 (indentation)
> Documentation/devicetree/bindings/phy/brcm,sata-phy.yaml:28:9: [warning] wrong indentation: expected 10 but found 8 (indentation)
> Documentation/devicetree/bindings/phy/brcm,sata-phy.yaml:30:9: [warning] wrong indentation: expected 10 but found 8 (indentation)
> Documentation/devicetree/bindings/phy/brcm,sata-phy.yaml:51:6: [warning] wrong indentation: expected 4 but found 5 (indentation)
> Documentation/devicetree/bindings/phy/brcm,sata-phy.yaml:71:11: [warning] wrong indentation: expected 9 but found 10 (indentation)
> Documentation/devicetree/bindings/phy/brcm,sata-phy.yaml:80:11: [warning] wrong indentation: expected 9 but found 10 (indentation)
> Documentation/devicetree/bindings/phy/brcm,sata-phy.yaml:88:11: [warning] wrong indentation: expected 9 but found 10 (indentation)
> 
> Can you pls fix those as well

Sure, just note, it's a different YAML file (I missed that initially and was
triple checking my bcm-ns-usb3-phy.yaml ;) ). So I'll handle it using a
different patch.

Re: [PATCH] dt-bindings: phy: bcm-ns-usb3-phy: convert to yaml

[Rafał Miłecki]

On 30.11.2020 16:58, Rafał Miłecki wrote:
> On 30.11.2020 16:43, Vinod Koul wrote:
>> On 16-11-20, 08:46, Rafał Miłecki wrote:
>>> From: Rafał Miłecki <rafal@milecki.pl>
>>>
>>> 1. Change syntax from txt to yaml
>>> 2. Drop "Driver for" from the title
>>> 3. Drop "reg = <0x0>;" from example (noticed by dt_binding_check)
>>> 4. Specify license
>>>
>>> Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
>>> ---
>>> I think this should go through linux-phy tree. Kishon, Vinod, can you
>>> take this patch?
>>>
>>> This patch generates a false positive checkpatch.pl warning [0].
>>> Please ignore:
>>> WARNING: DT binding docs and includes should be a separate patch. See: Documentation/devicetree/bindings/submitting-patches.rst
>>
>> I am seeing warnings for indentation:
>>
>> Documentation/devicetree/bindings/phy/brcm,sata-phy.yaml:19:9: [warning] wrong indentation: expected 10 but found 8 (indentation)
>> Documentation/devicetree/bindings/phy/brcm,sata-phy.yaml:20:12: [warning] wrong indentation: expected 12 but found 11 (indentation)
>> Documentation/devicetree/bindings/phy/brcm,sata-phy.yaml:26:9: [warning] wrong indentation: expected 10 but found 8 (indentation)
>> Documentation/devicetree/bindings/phy/brcm,sata-phy.yaml:28:9: [warning] wrong indentation: expected 10 but found 8 (indentation)
>> Documentation/devicetree/bindings/phy/brcm,sata-phy.yaml:30:9: [warning] wrong indentation: expected 10 but found 8 (indentation)
>> Documentation/devicetree/bindings/phy/brcm,sata-phy.yaml:51:6: [warning] wrong indentation: expected 4 but found 5 (indentation)
>> Documentation/devicetree/bindings/phy/brcm,sata-phy.yaml:71:11: [warning] wrong indentation: expected 9 but found 10 (indentation)
>> Documentation/devicetree/bindings/phy/brcm,sata-phy.yaml:80:11: [warning] wrong indentation: expected 9 but found 10 (indentation)
>> Documentation/devicetree/bindings/phy/brcm,sata-phy.yaml:88:11: [warning] wrong indentation: expected 9 but found 10 (indentation)
>>
>> Can you pls fix those as well
> 
> Sure, just note, it's a different YAML file (I missed that initially and was
> triple checking my bcm-ns-usb3-phy.yaml ;) ). So I'll handle it using a
> different patch.

Oh, that file doesn't actualy exist in tree yet. I guess you meant to reply to Florian's patch
[PATCH] dt-bindings: phy: Convert Broadcom SATA PHY to YAML

Re: [PATCH] dt-bindings: phy: bcm-ns-usb3-phy: convert to yaml

[Rob Herring]

On Mon, 16 Nov 2020 08:46:49 +0100, Rafał Miłecki wrote:
> From: Rafał Miłecki <rafal@milecki.pl>
> 
> 1. Change syntax from txt to yaml
> 2. Drop "Driver for" from the title
> 3. Drop "reg = <0x0>;" from example (noticed by dt_binding_check)
> 4. Specify license
> 
> Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
> ---
> I think this should go through linux-phy tree. Kishon, Vinod, can you
> take this patch?
> 
> This patch generates a false positive checkpatch.pl warning [0].
> Please ignore:
> WARNING: DT binding docs and includes should be a separate patch. See: Documentation/devicetree/bindings/submitting-patches.rst
> 
> [0] https://lkml.org/lkml/2020/2/18/1084
> ---
>  .../bindings/phy/bcm-ns-usb3-phy.txt          | 34 ----------
>  .../bindings/phy/bcm-ns-usb3-phy.yaml         | 62 +++++++++++++++++++
>  2 files changed, 62 insertions(+), 34 deletions(-)
>  delete mode 100644 Documentation/devicetree/bindings/phy/bcm-ns-usb3-phy.txt
>  create mode 100644 Documentation/devicetree/bindings/phy/bcm-ns-usb3-phy.yaml
> 

Reviewed-by: Rob Herring <robh@kernel.org>

Re: [PATCH] dt-bindings: phy: bcm-ns-usb2-phy: convert to yaml

[Rob Herring]

On Mon, 16 Nov 2020 08:46:50 +0100, Rafał Miłecki wrote:
> From: Rafał Miłecki <rafal@milecki.pl>
> 
> 1. Convert from txt to yaml
> 2. Drop "Driver for" from the title
> 3. Document "#phy-cells"
> 4. Fix example node name (noticed by dt_binding_check)
> 5. Add #include to example (noticed by dt_binding_check)
> 6. Specify license
> 
> Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
> ---
> I think this should go through linux-phy tree. Kishon, Vinod, can you
> take this patch?
> 
> This patch generates a false positive checkpatch.pl warning [0].
> Please ignore:
> WARNING: DT binding docs and includes should be a separate patch. See: Documentation/devicetree/bindings/submitting-patches.rst
> 
> [0] https://lkml.org/lkml/2020/2/18/1084
> ---
>  .../bindings/phy/bcm-ns-usb2-phy.txt          | 21 -------
>  .../bindings/phy/bcm-ns-usb2-phy.yaml         | 59 +++++++++++++++++++
>  2 files changed, 59 insertions(+), 21 deletions(-)
>  delete mode 100644 Documentation/devicetree/bindings/phy/bcm-ns-usb2-phy.txt
>  create mode 100644 Documentation/devicetree/bindings/phy/bcm-ns-usb2-phy.yaml
> 

Reviewed-by: Rob Herring <robh@kernel.org>

Re: [PATCH] dt-bindings: phy: bcm-ns-usb3-phy: convert to yaml

[Rafał Miłecki]

Hi,

On 16.11.2020 08:46, Rafał Miłecki wrote:
> From: Rafał Miłecki <rafal@milecki.pl>
> 
> 1. Change syntax from txt to yaml
> 2. Drop "Driver for" from the title
> 3. Drop "reg = <0x0>;" from example (noticed by dt_binding_check)
> 4. Specify license
> 
> Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
> ---
> I think this should go through linux-phy tree. Kishon, Vinod, can you
> take this patch?
> 
> This patch generates a false positive checkpatch.pl warning [0].
> Please ignore:
> WARNING: DT binding docs and includes should be a separate patch. See: Documentation/devicetree/bindings/submitting-patches.rst
> 
> [0] https://lkml.org/lkml/2020/2/18/1084

Kishon, Vinod: I sent this patch back in December, it was Reviewed-by
Rob, but never accepted.

Could you push this patch to the linux-phy.git?


> ---
>   .../bindings/phy/bcm-ns-usb3-phy.txt          | 34 ----------
>   .../bindings/phy/bcm-ns-usb3-phy.yaml         | 62 +++++++++++++++++++
>   2 files changed, 62 insertions(+), 34 deletions(-)
>   delete mode 100644 Documentation/devicetree/bindings/phy/bcm-ns-usb3-phy.txt
>   create mode 100644 Documentation/devicetree/bindings/phy/bcm-ns-usb3-phy.yaml
> 
> diff --git a/Documentation/devicetree/bindings/phy/bcm-ns-usb3-phy.txt b/Documentation/devicetree/bindings/phy/bcm-ns-usb3-phy.txt
> deleted file mode 100644
> index 32f057260351..000000000000
> --- a/Documentation/devicetree/bindings/phy/bcm-ns-usb3-phy.txt
> +++ /dev/null
> @@ -1,34 +0,0 @@
> -Driver for Broadcom Northstar USB 3.0 PHY
> -
> -Required properties:
> -
> -- compatible: one of: "brcm,ns-ax-usb3-phy", "brcm,ns-bx-usb3-phy".
> -- reg: address of MDIO bus device
> -- usb3-dmp-syscon: phandle to syscon with DMP (Device Management Plugin)
> -		   registers
> -- #phy-cells: must be 0
> -
> -Initialization of USB 3.0 PHY depends on Northstar version. There are currently
> -three known series: Ax, Bx and Cx.
> -Known A0: BCM4707 rev 0
> -Known B0: BCM4707 rev 4, BCM53573 rev 2
> -Known B1: BCM4707 rev 6
> -Known C0: BCM47094 rev 0
> -
> -Example:
> -	mdio: mdio@0 {
> -		reg = <0x0>;
> -		#size-cells = <1>;
> -		#address-cells = <0>;
> -
> -		usb3-phy@10 {
> -			compatible = "brcm,ns-ax-usb3-phy";
> -			reg = <0x10>;
> -			usb3-dmp-syscon = <&usb3_dmp>;
> -			#phy-cells = <0>;
> -		};
> -	};
> -
> -	usb3_dmp: syscon@18105000 {
> -		reg = <0x18105000 0x1000>;
> -	};
> diff --git a/Documentation/devicetree/bindings/phy/bcm-ns-usb3-phy.yaml b/Documentation/devicetree/bindings/phy/bcm-ns-usb3-phy.yaml
> new file mode 100644
> index 000000000000..7fd419db45d0
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/phy/bcm-ns-usb3-phy.yaml
> @@ -0,0 +1,62 @@
> +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/phy/bcm-ns-usb3-phy.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: Broadcom Northstar USB 3.0 PHY
> +
> +description: |
> +  Initialization of USB 3.0 PHY depends on Northstar version. There are currently
> +  three known series: Ax, Bx and Cx.
> +  Known A0: BCM4707 rev 0
> +  Known B0: BCM4707 rev 4, BCM53573 rev 2
> +  Known B1: BCM4707 rev 6
> +  Known C0: BCM47094 rev 0
> +
> +maintainers:
> +  - Rafał Miłecki <rafal@milecki.pl>
> +
> +properties:
> +  compatible:
> +    enum:
> +      - brcm,ns-ax-usb3-phy
> +      - brcm,ns-bx-usb3-phy
> +
> +  reg:
> +    description: address of MDIO bus device
> +    maxItems: 1
> +
> +  usb3-dmp-syscon:
> +    $ref: /schemas/types.yaml#/definitions/phandle
> +    description:
> +      Phandle to the DMP (Device Management Plugin) syscon
> +
> +  "#phy-cells":
> +    const: 0
> +
> +required:
> +  - compatible
> +  - reg
> +  - usb3-dmp-syscon
> +  - "#phy-cells"
> +
> +additionalProperties: false
> +
> +examples:
> +  - |
> +    mdio {
> +        #address-cells = <1>;
> +        #size-cells = <0>;
> +
> +        usb3-phy@10 {
> +            compatible = "brcm,ns-ax-usb3-phy";
> +            reg = <0x10>;
> +            usb3-dmp-syscon = <&usb3_dmp>;
> +            #phy-cells = <0>;
> +        };
> +    };
> +
> +    usb3_dmp: syscon@18105000 {
> +        reg = <0x18105000 0x1000>;
> +    };
> 

Re: [PATCH] dt-bindings: phy: bcm-ns-usb3-phy: convert to yaml

[Rafał Miłecki]

Hi,

On 16.11.2020 08:46, Rafał Miłecki wrote:
> From: Rafał Miłecki <rafal@milecki.pl>
> 
> 1. Change syntax from txt to yaml
> 2. Drop "Driver for" from the title
> 3. Drop "reg = <0x0>;" from example (noticed by dt_binding_check)
> 4. Specify license
> 
> Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
> ---
> I think this should go through linux-phy tree. Kishon, Vinod, can you
> take this patch?
> 
> This patch generates a false positive checkpatch.pl warning [0].
> Please ignore:
> WARNING: DT binding docs and includes should be a separate patch. See: Documentation/devicetree/bindings/submitting-patches.rst
> 
> [0] https://lkml.org/lkml/2020/2/18/1084

Kishon, Vinod: I sent this patch back in December, it was Reviewed-by
Rob, but never accepted.

Could you push this patch to the linux-phy.git?


> ---
>   .../bindings/phy/bcm-ns-usb3-phy.txt          | 34 ----------
>   .../bindings/phy/bcm-ns-usb3-phy.yaml         | 62 +++++++++++++++++++
>   2 files changed, 62 insertions(+), 34 deletions(-)
>   delete mode 100644 Documentation/devicetree/bindings/phy/bcm-ns-usb3-phy.txt
>   create mode 100644 Documentation/devicetree/bindings/phy/bcm-ns-usb3-phy.yaml
> 
> diff --git a/Documentation/devicetree/bindings/phy/bcm-ns-usb3-phy.txt b/Documentation/devicetree/bindings/phy/bcm-ns-usb3-phy.txt
> deleted file mode 100644
> index 32f057260351..000000000000
> --- a/Documentation/devicetree/bindings/phy/bcm-ns-usb3-phy.txt
> +++ /dev/null
> @@ -1,34 +0,0 @@
> -Driver for Broadcom Northstar USB 3.0 PHY
> -
> -Required properties:
> -
> -- compatible: one of: "brcm,ns-ax-usb3-phy", "brcm,ns-bx-usb3-phy".
> -- reg: address of MDIO bus device
> -- usb3-dmp-syscon: phandle to syscon with DMP (Device Management Plugin)
> -		   registers
> -- #phy-cells: must be 0
> -
> -Initialization of USB 3.0 PHY depends on Northstar version. There are currently
> -three known series: Ax, Bx and Cx.
> -Known A0: BCM4707 rev 0
> -Known B0: BCM4707 rev 4, BCM53573 rev 2
> -Known B1: BCM4707 rev 6
> -Known C0: BCM47094 rev 0
> -
> -Example:
> -	mdio: mdio@0 {
> -		reg = <0x0>;
> -		#size-cells = <1>;
> -		#address-cells = <0>;
> -
> -		usb3-phy@10 {
> -			compatible = "brcm,ns-ax-usb3-phy";
> -			reg = <0x10>;
> -			usb3-dmp-syscon = <&usb3_dmp>;
> -			#phy-cells = <0>;
> -		};
> -	};
> -
> -	usb3_dmp: syscon@18105000 {
> -		reg = <0x18105000 0x1000>;
> -	};
> diff --git a/Documentation/devicetree/bindings/phy/bcm-ns-usb3-phy.yaml b/Documentation/devicetree/bindings/phy/bcm-ns-usb3-phy.yaml
> new file mode 100644
> index 000000000000..7fd419db45d0
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/phy/bcm-ns-usb3-phy.yaml
> @@ -0,0 +1,62 @@
> +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/phy/bcm-ns-usb3-phy.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: Broadcom Northstar USB 3.0 PHY
> +
> +description: |
> +  Initialization of USB 3.0 PHY depends on Northstar version. There are currently
> +  three known series: Ax, Bx and Cx.
> +  Known A0: BCM4707 rev 0
> +  Known B0: BCM4707 rev 4, BCM53573 rev 2
> +  Known B1: BCM4707 rev 6
> +  Known C0: BCM47094 rev 0
> +
> +maintainers:
> +  - Rafał Miłecki <rafal@milecki.pl>
> +
> +properties:
> +  compatible:
> +    enum:
> +      - brcm,ns-ax-usb3-phy
> +      - brcm,ns-bx-usb3-phy
> +
> +  reg:
> +    description: address of MDIO bus device
> +    maxItems: 1
> +
> +  usb3-dmp-syscon:
> +    $ref: /schemas/types.yaml#/definitions/phandle
> +    description:
> +      Phandle to the DMP (Device Management Plugin) syscon
> +
> +  "#phy-cells":
> +    const: 0
> +
> +required:
> +  - compatible
> +  - reg
> +  - usb3-dmp-syscon
> +  - "#phy-cells"
> +
> +additionalProperties: false
> +
> +examples:
> +  - |
> +    mdio {
> +        #address-cells = <1>;
> +        #size-cells = <0>;
> +
> +        usb3-phy@10 {
> +            compatible = "brcm,ns-ax-usb3-phy";
> +            reg = <0x10>;
> +            usb3-dmp-syscon = <&usb3_dmp>;
> +            #phy-cells = <0>;
> +        };
> +    };
> +
> +    usb3_dmp: syscon@18105000 {
> +        reg = <0x18105000 0x1000>;
> +    };
> 

-- 
linux-phy mailing list
linux-phy@lists.infradead.org
https://lists.infradead.org/mailman/listinfo/linux-phy

Re: [PATCH] dt-bindings: phy: bcm-ns-usb2-phy: convert to yaml

[Rafał Miłecki]

On 16.11.2020 08:46, Rafał Miłecki wrote:
> From: Rafał Miłecki <rafal@milecki.pl>
> 
> 1. Convert from txt to yaml
> 2. Drop "Driver for" from the title
> 3. Document "#phy-cells"
> 4. Fix example node name (noticed by dt_binding_check)
> 5. Add #include to example (noticed by dt_binding_check)
> 6. Specify license
> 
> Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
> ---
> I think this should go through linux-phy tree. Kishon, Vinod, can you
> take this patch?
> 
> This patch generates a false positive checkpatch.pl warning [0].
> Please ignore:
> WARNING: DT binding docs and includes should be a separate patch. See: Documentation/devicetree/bindings/submitting-patches.rst
> 
> [0] https://lkml.org/lkml/2020/2/18/1084

Same thing here.

Kishon, Vinod: I sent this patch back in December, it was Reviewed-by
Rob, but never accepted.

Could you push this patch to the linux-phy.git?


> ---
>   .../bindings/phy/bcm-ns-usb2-phy.txt          | 21 -------
>   .../bindings/phy/bcm-ns-usb2-phy.yaml         | 59 +++++++++++++++++++
>   2 files changed, 59 insertions(+), 21 deletions(-)
>   delete mode 100644 Documentation/devicetree/bindings/phy/bcm-ns-usb2-phy.txt
>   create mode 100644 Documentation/devicetree/bindings/phy/bcm-ns-usb2-phy.yaml
> 
> diff --git a/Documentation/devicetree/bindings/phy/bcm-ns-usb2-phy.txt b/Documentation/devicetree/bindings/phy/bcm-ns-usb2-phy.txt
> deleted file mode 100644
> index a7aee9ea8926..000000000000
> --- a/Documentation/devicetree/bindings/phy/bcm-ns-usb2-phy.txt
> +++ /dev/null
> @@ -1,21 +0,0 @@
> -Driver for Broadcom Northstar USB 2.0 PHY
> -
> -Required properties:
> -- compatible: brcm,ns-usb2-phy
> -- reg: iomem address range of DMU (Device Management Unit)
> -- reg-names: "dmu", the only needed & supported reg right now
> -- clocks: USB PHY reference clock
> -- clock-names: "phy-ref-clk", the only needed & supported clock right now
> -
> -To initialize USB 2.0 PHY driver needs to setup PLL correctly. To do this it
> -requires passing phandle to the USB PHY reference clock.
> -
> -Example:
> -	usb2-phy {
> -		compatible = "brcm,ns-usb2-phy";
> -		reg = <0x1800c000 0x1000>;
> -		reg-names = "dmu";
> -		#phy-cells = <0>;
> -		clocks = <&genpll BCM_NSP_GENPLL_USB_PHY_REF_CLK>;
> -		clock-names = "phy-ref-clk";
> -	};
> diff --git a/Documentation/devicetree/bindings/phy/bcm-ns-usb2-phy.yaml b/Documentation/devicetree/bindings/phy/bcm-ns-usb2-phy.yaml
> new file mode 100644
> index 000000000000..05b4dcd80019
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/phy/bcm-ns-usb2-phy.yaml
> @@ -0,0 +1,59 @@
> +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/phy/bcm-ns-usb2-phy.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: Broadcom Northstar USB 2.0 PHY
> +
> +description: >
> +  To initialize USB 2.0 PHY driver needs to setup PLL correctly.
> +  To do this it requires passing phandle to the USB PHY reference clock.
> +
> +maintainers:
> +  - Rafał Miłecki <rafal@milecki.pl>
> +
> +properties:
> +  compatible:
> +    const: brcm,ns-usb2-phy
> +
> +  reg:
> +    items:
> +      - description: iomem address range of DMU (Device Management Unit)
> +
> +  reg-names:
> +    items:
> +      - const: dmu
> +
> +  clocks:
> +    items:
> +      - description: USB PHY reference clock
> +
> +  clock-names:
> +    items:
> +      - const: phy-ref-clk
> +
> +  "#phy-cells":
> +    const: 0
> +
> +required:
> +  - compatible
> +  - reg
> +  - reg-names
> +  - clocks
> +  - clock-names
> +  - "#phy-cells"
> +
> +additionalProperties: false
> +
> +examples:
> +  - |
> +    #include <dt-bindings/clock/bcm-nsp.h>
> +    phy@1800c000 {
> +        compatible = "brcm,ns-usb2-phy";
> +        reg = <0x1800c000 0x1000>;
> +        reg-names = "dmu";
> +        clocks = <&genpll BCM_NSP_GENPLL_USB_PHY_REF_CLK>;
> +        clock-names = "phy-ref-clk";
> +        #phy-cells = <0>;
> +    };
> 

Re: [PATCH] dt-bindings: phy: bcm-ns-usb2-phy: convert to yaml

[Rafał Miłecki]

On 16.11.2020 08:46, Rafał Miłecki wrote:
> From: Rafał Miłecki <rafal@milecki.pl>
> 
> 1. Convert from txt to yaml
> 2. Drop "Driver for" from the title
> 3. Document "#phy-cells"
> 4. Fix example node name (noticed by dt_binding_check)
> 5. Add #include to example (noticed by dt_binding_check)
> 6. Specify license
> 
> Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
> ---
> I think this should go through linux-phy tree. Kishon, Vinod, can you
> take this patch?
> 
> This patch generates a false positive checkpatch.pl warning [0].
> Please ignore:
> WARNING: DT binding docs and includes should be a separate patch. See: Documentation/devicetree/bindings/submitting-patches.rst
> 
> [0] https://lkml.org/lkml/2020/2/18/1084

Same thing here.

Kishon, Vinod: I sent this patch back in December, it was Reviewed-by
Rob, but never accepted.

Could you push this patch to the linux-phy.git?


> ---
>   .../bindings/phy/bcm-ns-usb2-phy.txt          | 21 -------
>   .../bindings/phy/bcm-ns-usb2-phy.yaml         | 59 +++++++++++++++++++
>   2 files changed, 59 insertions(+), 21 deletions(-)
>   delete mode 100644 Documentation/devicetree/bindings/phy/bcm-ns-usb2-phy.txt
>   create mode 100644 Documentation/devicetree/bindings/phy/bcm-ns-usb2-phy.yaml
> 
> diff --git a/Documentation/devicetree/bindings/phy/bcm-ns-usb2-phy.txt b/Documentation/devicetree/bindings/phy/bcm-ns-usb2-phy.txt
> deleted file mode 100644
> index a7aee9ea8926..000000000000
> --- a/Documentation/devicetree/bindings/phy/bcm-ns-usb2-phy.txt
> +++ /dev/null
> @@ -1,21 +0,0 @@
> -Driver for Broadcom Northstar USB 2.0 PHY
> -
> -Required properties:
> -- compatible: brcm,ns-usb2-phy
> -- reg: iomem address range of DMU (Device Management Unit)
> -- reg-names: "dmu", the only needed & supported reg right now
> -- clocks: USB PHY reference clock
> -- clock-names: "phy-ref-clk", the only needed & supported clock right now
> -
> -To initialize USB 2.0 PHY driver needs to setup PLL correctly. To do this it
> -requires passing phandle to the USB PHY reference clock.
> -
> -Example:
> -	usb2-phy {
> -		compatible = "brcm,ns-usb2-phy";
> -		reg = <0x1800c000 0x1000>;
> -		reg-names = "dmu";
> -		#phy-cells = <0>;
> -		clocks = <&genpll BCM_NSP_GENPLL_USB_PHY_REF_CLK>;
> -		clock-names = "phy-ref-clk";
> -	};
> diff --git a/Documentation/devicetree/bindings/phy/bcm-ns-usb2-phy.yaml b/Documentation/devicetree/bindings/phy/bcm-ns-usb2-phy.yaml
> new file mode 100644
> index 000000000000..05b4dcd80019
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/phy/bcm-ns-usb2-phy.yaml
> @@ -0,0 +1,59 @@
> +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/phy/bcm-ns-usb2-phy.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: Broadcom Northstar USB 2.0 PHY
> +
> +description: >
> +  To initialize USB 2.0 PHY driver needs to setup PLL correctly.
> +  To do this it requires passing phandle to the USB PHY reference clock.
> +
> +maintainers:
> +  - Rafał Miłecki <rafal@milecki.pl>
> +
> +properties:
> +  compatible:
> +    const: brcm,ns-usb2-phy
> +
> +  reg:
> +    items:
> +      - description: iomem address range of DMU (Device Management Unit)
> +
> +  reg-names:
> +    items:
> +      - const: dmu
> +
> +  clocks:
> +    items:
> +      - description: USB PHY reference clock
> +
> +  clock-names:
> +    items:
> +      - const: phy-ref-clk
> +
> +  "#phy-cells":
> +    const: 0
> +
> +required:
> +  - compatible
> +  - reg
> +  - reg-names
> +  - clocks
> +  - clock-names
> +  - "#phy-cells"
> +
> +additionalProperties: false
> +
> +examples:
> +  - |
> +    #include <dt-bindings/clock/bcm-nsp.h>
> +    phy@1800c000 {
> +        compatible = "brcm,ns-usb2-phy";
> +        reg = <0x1800c000 0x1000>;
> +        reg-names = "dmu";
> +        clocks = <&genpll BCM_NSP_GENPLL_USB_PHY_REF_CLK>;
> +        clock-names = "phy-ref-clk";
> +        #phy-cells = <0>;
> +    };
> 

-- 
linux-phy mailing list
linux-phy@lists.infradead.org
https://lists.infradead.org/mailman/listinfo/linux-phy

Re: [PATCH] dt-bindings: phy: bcm-ns-usb3-phy: convert to yaml

[Vinod Koul]

On 11-03-21, 21:31, Rafał Miłecki wrote:
> Hi,
> 
> On 16.11.2020 08:46, Rafał Miłecki wrote:
> > From: Rafał Miłecki <rafal@milecki.pl>
> > 
> > 1. Change syntax from txt to yaml
> > 2. Drop "Driver for" from the title
> > 3. Drop "reg = <0x0>;" from example (noticed by dt_binding_check)
> > 4. Specify license
> > 
> > Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
> > ---
> > I think this should go through linux-phy tree. Kishon, Vinod, can you
> > take this patch?
> > 
> > This patch generates a false positive checkpatch.pl warning [0].
> > Please ignore:
> > WARNING: DT binding docs and includes should be a separate patch. See: Documentation/devicetree/bindings/submitting-patches.rst
> > 
> > [0] https://lkml.org/lkml/2020/2/18/1084
> 
> Kishon, Vinod: I sent this patch back in December, it was Reviewed-by
> Rob, but never accepted.
> 
> Could you push this patch to the linux-phy.git?

Can you please rebase and resent me this patch. I am trying to
streamline patches now using phy ml and pw instance so that we dont miss
anything..

Thanks

-- 
~Vinod

Re: [PATCH] dt-bindings: phy: bcm-ns-usb3-phy: convert to yaml

[Vinod Koul]

On 11-03-21, 21:31, Rafał Miłecki wrote:
> Hi,
> 
> On 16.11.2020 08:46, Rafał Miłecki wrote:
> > From: Rafał Miłecki <rafal@milecki.pl>
> > 
> > 1. Change syntax from txt to yaml
> > 2. Drop "Driver for" from the title
> > 3. Drop "reg = <0x0>;" from example (noticed by dt_binding_check)
> > 4. Specify license
> > 
> > Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
> > ---
> > I think this should go through linux-phy tree. Kishon, Vinod, can you
> > take this patch?
> > 
> > This patch generates a false positive checkpatch.pl warning [0].
> > Please ignore:
> > WARNING: DT binding docs and includes should be a separate patch. See: Documentation/devicetree/bindings/submitting-patches.rst
> > 
> > [0] https://lkml.org/lkml/2020/2/18/1084
> 
> Kishon, Vinod: I sent this patch back in December, it was Reviewed-by
> Rob, but never accepted.
> 
> Could you push this patch to the linux-phy.git?

Can you please rebase and resent me this patch. I am trying to
streamline patches now using phy ml and pw instance so that we dont miss
anything..

Thanks

-- 
~Vinod

-- 
linux-phy mailing list
linux-phy@lists.infradead.org
https://lists.infradead.org/mailman/listinfo/linux-phy

Re: [PATCH] dt-bindings: phy: bcm-ns-usb3-phy: convert to yaml

[Rafał Miłecki]

On 2021-03-15 11:41, Vinod Koul wrote:
> On 11-03-21, 21:31, Rafał Miłecki wrote:
>> Hi,
>> 
>> On 16.11.2020 08:46, Rafał Miłecki wrote:
>> > From: Rafał Miłecki <rafal@milecki.pl>
>> >
>> > 1. Change syntax from txt to yaml
>> > 2. Drop "Driver for" from the title
>> > 3. Drop "reg = <0x0>;" from example (noticed by dt_binding_check)
>> > 4. Specify license
>> >
>> > Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
>> > ---
>> > I think this should go through linux-phy tree. Kishon, Vinod, can you
>> > take this patch?
>> >
>> > This patch generates a false positive checkpatch.pl warning [0].
>> > Please ignore:
>> > WARNING: DT binding docs and includes should be a separate patch. See: Documentation/devicetree/bindings/submitting-patches.rst
>> >
>> > [0] https://lkml.org/lkml/2020/2/18/1084
>> 
>> Kishon, Vinod: I sent this patch back in December, it was Reviewed-by
>> Rob, but never accepted.
>> 
>> Could you push this patch to the linux-phy.git?
> 
> Can you please rebase and resent me this patch. I am trying to
> streamline patches now using phy ml and pw instance so that we dont 
> miss
> anything..

Both patches apply cleanly. Maybe your mail client malformed them for 
you?

They are accessible in the devicetree-bindings patchwork:
https://patchwork.ozlabs.org/project/devicetree-bindings/patch/20201116074650.16070-1-zajec5@gmail.com/
https://patchwork.ozlabs.org/project/devicetree-bindings/patch/20201116074650.16070-2-zajec5@gmail.com/

You can apply both patches doing e.g.:
curl 
https://patchwork.ozlabs.org/project/devicetree-bindings/patch/20201116074650.16070-1-zajec5@gmail.com/mbox/ 
| git am
curl 
https://patchwork.ozlabs.org/project/devicetree-bindings/patch/20201116074650.16070-2-zajec5@gmail.com/mbox/ 
| git am

Re: [PATCH] dt-bindings: phy: bcm-ns-usb3-phy: convert to yaml

[Rafał Miłecki]

On 2021-03-15 11:41, Vinod Koul wrote:
> On 11-03-21, 21:31, Rafał Miłecki wrote:
>> Hi,
>> 
>> On 16.11.2020 08:46, Rafał Miłecki wrote:
>> > From: Rafał Miłecki <rafal@milecki.pl>
>> >
>> > 1. Change syntax from txt to yaml
>> > 2. Drop "Driver for" from the title
>> > 3. Drop "reg = <0x0>;" from example (noticed by dt_binding_check)
>> > 4. Specify license
>> >
>> > Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
>> > ---
>> > I think this should go through linux-phy tree. Kishon, Vinod, can you
>> > take this patch?
>> >
>> > This patch generates a false positive checkpatch.pl warning [0].
>> > Please ignore:
>> > WARNING: DT binding docs and includes should be a separate patch. See: Documentation/devicetree/bindings/submitting-patches.rst
>> >
>> > [0] https://lkml.org/lkml/2020/2/18/1084
>> 
>> Kishon, Vinod: I sent this patch back in December, it was Reviewed-by
>> Rob, but never accepted.
>> 
>> Could you push this patch to the linux-phy.git?
> 
> Can you please rebase and resent me this patch. I am trying to
> streamline patches now using phy ml and pw instance so that we dont 
> miss
> anything..

Both patches apply cleanly. Maybe your mail client malformed them for 
you?

They are accessible in the devicetree-bindings patchwork:
https://patchwork.ozlabs.org/project/devicetree-bindings/patch/20201116074650.16070-1-zajec5@gmail.com/
https://patchwork.ozlabs.org/project/devicetree-bindings/patch/20201116074650.16070-2-zajec5@gmail.com/

You can apply both patches doing e.g.:
curl 
https://patchwork.ozlabs.org/project/devicetree-bindings/patch/20201116074650.16070-1-zajec5@gmail.com/mbox/ 
| git am
curl 
https://patchwork.ozlabs.org/project/devicetree-bindings/patch/20201116074650.16070-2-zajec5@gmail.com/mbox/ 
| git am

-- 
linux-phy mailing list
linux-phy@lists.infradead.org
https://lists.infradead.org/mailman/listinfo/linux-phy