* [PATCH 0/2] ARM: dts: aspeed: Add Ampere Mt. Jade BMC device @ 2020-12-08 4:36 ` Quan Nguyen 0 siblings, 0 replies; 21+ messages in thread From: Quan Nguyen @ 2020-12-08 4:36 UTC (permalink / raw) To: Rob Herring, Joel Stanley, Andrew Jeffery, Sam Ravnborg, Krzysztof Kozlowski, Linus Walleij, Arnd Bergmann, Mark Brown, Kuninori Morimoto, Geert Uytterhoeven, allen, devicetree, linux-kernel, linux-arm-kernel, linux-aspeed The Mt. Jade BMC is an ASPEED AST2500-based BMC for the Mt. Jade hardware reference platform with Ampere's Altra Processor Family. Quan Nguyen (2): dt-bindings: vendor-prefixes: Add an entry for AmpereComputing.com ARM: dts: aspeed: Add device tree for Ampere's Mt. Jade BMC .../devicetree/bindings/vendor-prefixes.yaml | 2 + arch/arm/boot/dts/Makefile | 1 + .../arm/boot/dts/aspeed-bmc-ampere-mtjade.dts | 558 ++++++++++++++++++ 3 files changed, 561 insertions(+) create mode 100644 arch/arm/boot/dts/aspeed-bmc-ampere-mtjade.dts -- 2.28.0 ^ permalink raw reply [flat|nested] 21+ messages in thread
* [PATCH 0/2] ARM: dts: aspeed: Add Ampere Mt. Jade BMC device @ 2020-12-08 4:36 ` Quan Nguyen 0 siblings, 0 replies; 21+ messages in thread From: Quan Nguyen @ 2020-12-08 4:36 UTC (permalink / raw) To: Rob Herring, Joel Stanley, Andrew Jeffery, Sam Ravnborg, Krzysztof Kozlowski, Linus Walleij, Arnd Bergmann, Mark Brown, Kuninori Morimoto, Geert Uytterhoeven, allen, devicetree, linux-kernel, linux-arm-kernel, linux-aspeed The Mt. Jade BMC is an ASPEED AST2500-based BMC for the Mt. Jade hardware reference platform with Ampere's Altra Processor Family. Quan Nguyen (2): dt-bindings: vendor-prefixes: Add an entry for AmpereComputing.com ARM: dts: aspeed: Add device tree for Ampere's Mt. Jade BMC .../devicetree/bindings/vendor-prefixes.yaml | 2 + arch/arm/boot/dts/Makefile | 1 + .../arm/boot/dts/aspeed-bmc-ampere-mtjade.dts | 558 ++++++++++++++++++ 3 files changed, 561 insertions(+) create mode 100644 arch/arm/boot/dts/aspeed-bmc-ampere-mtjade.dts -- 2.28.0 _______________________________________________ linux-arm-kernel mailing list linux-arm-kernel@lists.infradead.org http://lists.infradead.org/mailman/listinfo/linux-arm-kernel ^ permalink raw reply [flat|nested] 21+ messages in thread
* [PATCH 1/2] dt-bindings: vendor-prefixes: Add an entry for AmpereComputing.com 2020-12-08 4:36 ` Quan Nguyen @ 2020-12-08 4:36 ` Quan Nguyen -1 siblings, 0 replies; 21+ messages in thread From: Quan Nguyen @ 2020-12-08 4:36 UTC (permalink / raw) To: Rob Herring, Joel Stanley, Andrew Jeffery, Sam Ravnborg, Krzysztof Kozlowski, Linus Walleij, Arnd Bergmann, Mark Brown, Kuninori Morimoto, Geert Uytterhoeven, allen, devicetree, linux-kernel, linux-arm-kernel, linux-aspeed Add "ampere" entry for Ampere Computing LLC: amperecomputing.com Reviewed-by: Andrew Jeffery <andrew@aj.id.au> Reviewed-by: Joel Stanley <joel@jms.id.au> Signed-off-by: Quan Nguyen <quan@os.amperecomputing.com> Signed-off-by: Phong Vo <phong@os.amperecomputing.com> Signed-off-by: Thang Q. Nguyen <thang@os.amperecomputing.com> --- Documentation/devicetree/bindings/vendor-prefixes.yaml | 2 ++ 1 file changed, 2 insertions(+) diff --git a/Documentation/devicetree/bindings/vendor-prefixes.yaml b/Documentation/devicetree/bindings/vendor-prefixes.yaml index 3a76c226771b..a83fa090f3d4 100644 --- a/Documentation/devicetree/bindings/vendor-prefixes.yaml +++ b/Documentation/devicetree/bindings/vendor-prefixes.yaml @@ -85,6 +85,8 @@ patternProperties: description: Shenzhen Amediatech Technology Co., Ltd "^amlogic,.*": description: Amlogic, Inc. + "^ampere,.*": + description: Ampere Computing LLC "^ampire,.*": description: Ampire Co., Ltd. "^ams,.*": -- 2.28.0 ^ permalink raw reply related [flat|nested] 21+ messages in thread
* [PATCH 1/2] dt-bindings: vendor-prefixes: Add an entry for AmpereComputing.com @ 2020-12-08 4:36 ` Quan Nguyen 0 siblings, 0 replies; 21+ messages in thread From: Quan Nguyen @ 2020-12-08 4:36 UTC (permalink / raw) To: Rob Herring, Joel Stanley, Andrew Jeffery, Sam Ravnborg, Krzysztof Kozlowski, Linus Walleij, Arnd Bergmann, Mark Brown, Kuninori Morimoto, Geert Uytterhoeven, allen, devicetree, linux-kernel, linux-arm-kernel, linux-aspeed Add "ampere" entry for Ampere Computing LLC: amperecomputing.com Reviewed-by: Andrew Jeffery <andrew@aj.id.au> Reviewed-by: Joel Stanley <joel@jms.id.au> Signed-off-by: Quan Nguyen <quan@os.amperecomputing.com> Signed-off-by: Phong Vo <phong@os.amperecomputing.com> Signed-off-by: Thang Q. Nguyen <thang@os.amperecomputing.com> --- Documentation/devicetree/bindings/vendor-prefixes.yaml | 2 ++ 1 file changed, 2 insertions(+) diff --git a/Documentation/devicetree/bindings/vendor-prefixes.yaml b/Documentation/devicetree/bindings/vendor-prefixes.yaml index 3a76c226771b..a83fa090f3d4 100644 --- a/Documentation/devicetree/bindings/vendor-prefixes.yaml +++ b/Documentation/devicetree/bindings/vendor-prefixes.yaml @@ -85,6 +85,8 @@ patternProperties: description: Shenzhen Amediatech Technology Co., Ltd "^amlogic,.*": description: Amlogic, Inc. + "^ampere,.*": + description: Ampere Computing LLC "^ampire,.*": description: Ampire Co., Ltd. "^ams,.*": -- 2.28.0 _______________________________________________ linux-arm-kernel mailing list linux-arm-kernel@lists.infradead.org http://lists.infradead.org/mailman/listinfo/linux-arm-kernel ^ permalink raw reply related [flat|nested] 21+ messages in thread
* Re: [PATCH 1/2] dt-bindings: vendor-prefixes: Add an entry for AmpereComputing.com 2020-12-08 4:36 ` Quan Nguyen @ 2020-12-08 4:41 ` Joel Stanley -1 siblings, 0 replies; 21+ messages in thread From: Joel Stanley @ 2020-12-08 4:41 UTC (permalink / raw) To: Quan Nguyen Cc: Rob Herring, Andrew Jeffery, Sam Ravnborg, Krzysztof Kozlowski, Linus Walleij, Arnd Bergmann, Mark Brown, Kuninori Morimoto, Geert Uytterhoeven, allen, devicetree, Linux Kernel Mailing List, Linux ARM, linux-aspeed Hello Rob, On Tue, 8 Dec 2020 at 04:37, Quan Nguyen <quan@os.amperecomputing.com> wrote: > > Add "ampere" entry for Ampere Computing LLC: amperecomputing.com > > Reviewed-by: Andrew Jeffery <andrew@aj.id.au> > Reviewed-by: Joel Stanley <joel@jms.id.au> > Signed-off-by: Quan Nguyen <quan@os.amperecomputing.com> > Signed-off-by: Phong Vo <phong@os.amperecomputing.com> > Signed-off-by: Thang Q. Nguyen <thang@os.amperecomputing.com> Do you take this through your tree? Cheers, Joel > --- > Documentation/devicetree/bindings/vendor-prefixes.yaml | 2 ++ > 1 file changed, 2 insertions(+) > > diff --git a/Documentation/devicetree/bindings/vendor-prefixes.yaml b/Documentation/devicetree/bindings/vendor-prefixes.yaml > index 3a76c226771b..a83fa090f3d4 100644 > --- a/Documentation/devicetree/bindings/vendor-prefixes.yaml > +++ b/Documentation/devicetree/bindings/vendor-prefixes.yaml > @@ -85,6 +85,8 @@ patternProperties: > description: Shenzhen Amediatech Technology Co., Ltd > "^amlogic,.*": > description: Amlogic, Inc. > + "^ampere,.*": > + description: Ampere Computing LLC > "^ampire,.*": > description: Ampire Co., Ltd. > "^ams,.*": > -- > 2.28.0 > ^ permalink raw reply [flat|nested] 21+ messages in thread
* Re: [PATCH 1/2] dt-bindings: vendor-prefixes: Add an entry for AmpereComputing.com @ 2020-12-08 4:41 ` Joel Stanley 0 siblings, 0 replies; 21+ messages in thread From: Joel Stanley @ 2020-12-08 4:41 UTC (permalink / raw) To: Quan Nguyen Cc: devicetree, Kuninori Morimoto, Arnd Bergmann, Andrew Jeffery, allen, Linus Walleij, Linux Kernel Mailing List, Krzysztof Kozlowski, linux-aspeed, Rob Herring, Mark Brown, Geert Uytterhoeven, Sam Ravnborg, Linux ARM Hello Rob, On Tue, 8 Dec 2020 at 04:37, Quan Nguyen <quan@os.amperecomputing.com> wrote: > > Add "ampere" entry for Ampere Computing LLC: amperecomputing.com > > Reviewed-by: Andrew Jeffery <andrew@aj.id.au> > Reviewed-by: Joel Stanley <joel@jms.id.au> > Signed-off-by: Quan Nguyen <quan@os.amperecomputing.com> > Signed-off-by: Phong Vo <phong@os.amperecomputing.com> > Signed-off-by: Thang Q. Nguyen <thang@os.amperecomputing.com> Do you take this through your tree? Cheers, Joel > --- > Documentation/devicetree/bindings/vendor-prefixes.yaml | 2 ++ > 1 file changed, 2 insertions(+) > > diff --git a/Documentation/devicetree/bindings/vendor-prefixes.yaml b/Documentation/devicetree/bindings/vendor-prefixes.yaml > index 3a76c226771b..a83fa090f3d4 100644 > --- a/Documentation/devicetree/bindings/vendor-prefixes.yaml > +++ b/Documentation/devicetree/bindings/vendor-prefixes.yaml > @@ -85,6 +85,8 @@ patternProperties: > description: Shenzhen Amediatech Technology Co., Ltd > "^amlogic,.*": > description: Amlogic, Inc. > + "^ampere,.*": > + description: Ampere Computing LLC > "^ampire,.*": > description: Ampire Co., Ltd. > "^ams,.*": > -- > 2.28.0 > _______________________________________________ linux-arm-kernel mailing list linux-arm-kernel@lists.infradead.org http://lists.infradead.org/mailman/listinfo/linux-arm-kernel ^ permalink raw reply [flat|nested] 21+ messages in thread
* Re: [PATCH 1/2] dt-bindings: vendor-prefixes: Add an entry for AmpereComputing.com 2020-12-08 4:41 ` Joel Stanley @ 2020-12-08 8:07 ` Krzysztof Kozlowski -1 siblings, 0 replies; 21+ messages in thread From: Krzysztof Kozlowski @ 2020-12-08 8:07 UTC (permalink / raw) To: Joel Stanley Cc: Quan Nguyen, Rob Herring, Andrew Jeffery, Sam Ravnborg, Linus Walleij, Arnd Bergmann, Mark Brown, Kuninori Morimoto, Geert Uytterhoeven, allen, devicetree, Linux Kernel Mailing List, Linux ARM, linux-aspeed On Tue, 8 Dec 2020 at 05:41, Joel Stanley <joel@jms.id.au> wrote: > > Hello Rob, > > On Tue, 8 Dec 2020 at 04:37, Quan Nguyen <quan@os.amperecomputing.com> wrote: > > > > Add "ampere" entry for Ampere Computing LLC: amperecomputing.com > > > > Reviewed-by: Andrew Jeffery <andrew@aj.id.au> > > Reviewed-by: Joel Stanley <joel@jms.id.au> > > Signed-off-by: Quan Nguyen <quan@os.amperecomputing.com> > > Signed-off-by: Phong Vo <phong@os.amperecomputing.com> > > Signed-off-by: Thang Q. Nguyen <thang@os.amperecomputing.com> It's the first version of the series already with Review tags. Please post them on the list, not off-list. Best regards, Krzysztof ^ permalink raw reply [flat|nested] 21+ messages in thread
* Re: [PATCH 1/2] dt-bindings: vendor-prefixes: Add an entry for AmpereComputing.com @ 2020-12-08 8:07 ` Krzysztof Kozlowski 0 siblings, 0 replies; 21+ messages in thread From: Krzysztof Kozlowski @ 2020-12-08 8:07 UTC (permalink / raw) To: Joel Stanley Cc: devicetree, Kuninori Morimoto, Arnd Bergmann, Andrew Jeffery, allen, Linus Walleij, Linux Kernel Mailing List, linux-aspeed, Rob Herring, Mark Brown, Quan Nguyen, Geert Uytterhoeven, Sam Ravnborg, Linux ARM On Tue, 8 Dec 2020 at 05:41, Joel Stanley <joel@jms.id.au> wrote: > > Hello Rob, > > On Tue, 8 Dec 2020 at 04:37, Quan Nguyen <quan@os.amperecomputing.com> wrote: > > > > Add "ampere" entry for Ampere Computing LLC: amperecomputing.com > > > > Reviewed-by: Andrew Jeffery <andrew@aj.id.au> > > Reviewed-by: Joel Stanley <joel@jms.id.au> > > Signed-off-by: Quan Nguyen <quan@os.amperecomputing.com> > > Signed-off-by: Phong Vo <phong@os.amperecomputing.com> > > Signed-off-by: Thang Q. Nguyen <thang@os.amperecomputing.com> It's the first version of the series already with Review tags. Please post them on the list, not off-list. Best regards, Krzysztof _______________________________________________ linux-arm-kernel mailing list linux-arm-kernel@lists.infradead.org http://lists.infradead.org/mailman/listinfo/linux-arm-kernel ^ permalink raw reply [flat|nested] 21+ messages in thread
* Re: [PATCH 1/2] dt-bindings: vendor-prefixes: Add an entry for AmpereComputing.com 2020-12-08 4:36 ` Quan Nguyen @ 2020-12-10 2:15 ` Rob Herring -1 siblings, 0 replies; 21+ messages in thread From: Rob Herring @ 2020-12-10 2:15 UTC (permalink / raw) To: Quan Nguyen Cc: linux-aspeed, linux-arm-kernel, Joel Stanley, Krzysztof Kozlowski, devicetree, linux-kernel, Linus Walleij, Arnd Bergmann, allen, Geert Uytterhoeven, Mark Brown, Andrew Jeffery, Kuninori Morimoto, Rob Herring, Sam Ravnborg On Tue, 08 Dec 2020 11:36:59 +0700, Quan Nguyen wrote: > Add "ampere" entry for Ampere Computing LLC: amperecomputing.com > > Reviewed-by: Andrew Jeffery <andrew@aj.id.au> > Reviewed-by: Joel Stanley <joel@jms.id.au> > Signed-off-by: Quan Nguyen <quan@os.amperecomputing.com> > Signed-off-by: Phong Vo <phong@os.amperecomputing.com> > Signed-off-by: Thang Q. Nguyen <thang@os.amperecomputing.com> > --- > Documentation/devicetree/bindings/vendor-prefixes.yaml | 2 ++ > 1 file changed, 2 insertions(+) > Applied, thanks! ^ permalink raw reply [flat|nested] 21+ messages in thread
* Re: [PATCH 1/2] dt-bindings: vendor-prefixes: Add an entry for AmpereComputing.com @ 2020-12-10 2:15 ` Rob Herring 0 siblings, 0 replies; 21+ messages in thread From: Rob Herring @ 2020-12-10 2:15 UTC (permalink / raw) To: Quan Nguyen Cc: devicetree, Kuninori Morimoto, Arnd Bergmann, linux-aspeed, Andrew Jeffery, allen, Linus Walleij, linux-kernel, Krzysztof Kozlowski, Rob Herring, Mark Brown, Joel Stanley, Geert Uytterhoeven, Sam Ravnborg, linux-arm-kernel On Tue, 08 Dec 2020 11:36:59 +0700, Quan Nguyen wrote: > Add "ampere" entry for Ampere Computing LLC: amperecomputing.com > > Reviewed-by: Andrew Jeffery <andrew@aj.id.au> > Reviewed-by: Joel Stanley <joel@jms.id.au> > Signed-off-by: Quan Nguyen <quan@os.amperecomputing.com> > Signed-off-by: Phong Vo <phong@os.amperecomputing.com> > Signed-off-by: Thang Q. Nguyen <thang@os.amperecomputing.com> > --- > Documentation/devicetree/bindings/vendor-prefixes.yaml | 2 ++ > 1 file changed, 2 insertions(+) > Applied, thanks! _______________________________________________ linux-arm-kernel mailing list linux-arm-kernel@lists.infradead.org http://lists.infradead.org/mailman/listinfo/linux-arm-kernel ^ permalink raw reply [flat|nested] 21+ messages in thread
* [PATCH 2/2] ARM: dts: aspeed: Add device tree for Ampere's Mt. Jade BMC 2020-12-08 4:36 ` Quan Nguyen @ 2020-12-08 4:37 ` Quan Nguyen -1 siblings, 0 replies; 21+ messages in thread From: Quan Nguyen @ 2020-12-08 4:37 UTC (permalink / raw) To: Rob Herring, Joel Stanley, Andrew Jeffery, Sam Ravnborg, Krzysztof Kozlowski, Linus Walleij, Arnd Bergmann, Mark Brown, Kuninori Morimoto, Geert Uytterhoeven, allen, devicetree, linux-kernel, linux-arm-kernel, linux-aspeed The Mt. Jade BMC is an ASPEED AST2500-based BMC for the Mt. Jade hardware reference platform with Ampere's Altra Processor Family. Reviewed-by: Andrew Jeffery <andrew@aj.id.au> Reviewed-by: Joel Stanley <joel@jms.id.au> Signed-off-by: Quan Nguyen <quan@os.amperecomputing.com> Signed-off-by: Phong Vo <phong@os.amperecomputing.com> Signed-off-by: Thang Q. Nguyen <thang@os.amperecomputing.com> --- arch/arm/boot/dts/Makefile | 1 + .../arm/boot/dts/aspeed-bmc-ampere-mtjade.dts | 558 ++++++++++++++++++ 2 files changed, 559 insertions(+) create mode 100644 arch/arm/boot/dts/aspeed-bmc-ampere-mtjade.dts diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile index 9f9f3e49132a..5da5e8f93554 100644 --- a/arch/arm/boot/dts/Makefile +++ b/arch/arm/boot/dts/Makefile @@ -1398,6 +1398,7 @@ dtb-$(CONFIG_ARCH_ASPEED) += \ aspeed-ast2500-evb.dtb \ aspeed-ast2600-evb.dtb \ aspeed-bmc-amd-ethanolx.dtb \ + aspeed-bmc-ampere-mtjade.dtb \ aspeed-bmc-arm-centriq2400-rep.dtb \ aspeed-bmc-arm-stardragon4800-rep2.dtb \ aspeed-bmc-bytedance-g220a.dtb \ diff --git a/arch/arm/boot/dts/aspeed-bmc-ampere-mtjade.dts b/arch/arm/boot/dts/aspeed-bmc-ampere-mtjade.dts new file mode 100644 index 000000000000..8f5ec22e51c2 --- /dev/null +++ b/arch/arm/boot/dts/aspeed-bmc-ampere-mtjade.dts @@ -0,0 +1,558 @@ +// SPDX-License-Identifier: GPL-2.0+ +/dts-v1/; +#include "aspeed-g5.dtsi" +#include <dt-bindings/gpio/aspeed-gpio.h> + +/ { + model = "Ampere Mt. Jade BMC"; + compatible = "ampere,mtjade-bmc", "aspeed,ast2500"; + + chosen { + stdout-path = &uart5; + bootargs = "console=ttyS4,115200 earlyprintk"; + }; + + memory@80000000 { + reg = <0x80000000 0x20000000>; + }; + + reserved-memory { + #address-cells = <1>; + #size-cells = <1>; + ranges; + + vga_memory: framebuffer@9f000000 { + no-map; + reg = <0x9f000000 0x01000000>; /* 16M */ + }; + + gfx_memory: framebuffer { + size = <0x01000000>; + alignment = <0x01000000>; + compatible = "shared-dma-pool"; + reusable; + }; + + video_engine_memory: jpegbuffer { + size = <0x02000000>; /* 32M */ + alignment = <0x01000000>; + compatible = "shared-dma-pool"; + reusable; + }; + }; + + leds { + compatible = "gpio-leds"; + + fault { + gpios = <&gpio ASPEED_GPIO(B, 6) GPIO_ACTIVE_HIGH>; + }; + + identify { + gpios = <&gpio ASPEED_GPIO(Q, 6) GPIO_ACTIVE_HIGH>; + }; + }; + + gpio-keys { + compatible = "gpio-keys"; + + shutdown_ack { + label = "SHUTDOWN_ACK"; + gpios = <&gpio ASPEED_GPIO(G, 2) GPIO_ACTIVE_LOW>; + linux,code = <ASPEED_GPIO(G, 2)>; + }; + + reboot_ack { + label = "REBOOT_ACK"; + gpios = <&gpio ASPEED_GPIO(J, 3) GPIO_ACTIVE_LOW>; + linux,code = <ASPEED_GPIO(J, 3)>; + }; + + S0_overtemp { + label = "S0_OVERTEMP"; + gpios = <&gpio ASPEED_GPIO(G, 3) GPIO_ACTIVE_LOW>; + linux,code = <ASPEED_GPIO(G, 3)>; + }; + + S0_hightemp { + label = "S0_HIGHTEMP"; + gpios = <&gpio ASPEED_GPIO(J, 0) GPIO_ACTIVE_LOW>; + linux,code = <ASPEED_GPIO(J, 0)>; + }; + + S0_cpu_fault { + label = "S0_CPU_FAULT"; + gpios = <&gpio ASPEED_GPIO(J, 1) GPIO_ACTIVE_HIGH>; + linux,code = <ASPEED_GPIO(J, 1)>; + }; + + S1_overtemp { + label = "S1_OVERTEMP"; + gpios = <&gpio ASPEED_GPIO(Z, 6) GPIO_ACTIVE_LOW>; + linux,code = <ASPEED_GPIO(Z, 6)>; + }; + + S1_hightemp { + label = "S1_HIGHTEMP"; + gpios = <&gpio ASPEED_GPIO(AB, 0) GPIO_ACTIVE_LOW>; + linux,code = <ASPEED_GPIO(AB, 0)>; + }; + + S1_cpu_fault { + label = "S1_CPU_FAULT"; + gpios = <&gpio ASPEED_GPIO(Z, 1) GPIO_ACTIVE_HIGH>; + linux,code = <ASPEED_GPIO(Z, 1)>; + }; + + id_button { + label = "ID_BUTTON"; + gpios = <&gpio ASPEED_GPIO(Q, 5) GPIO_ACTIVE_LOW>; + linux,code = <ASPEED_GPIO(Q, 5)>; + }; + + }; + + gpioA0mux: mux-controller { + compatible = "gpio-mux"; + #mux-control-cells = <0>; + mux-gpios = <&gpio ASPEED_GPIO(A, 0) GPIO_ACTIVE_LOW>; + }; + + adc0mux: adc0mux { + compatible = "io-channel-mux"; + io-channels = <&adc 0>; + #io-channel-cells = <1>; + io-channel-names = "parent"; + mux-controls = <&gpioA0mux>; + channels = "s0", "s1"; + }; + + adc1mux: adc1mux { + compatible = "io-channel-mux"; + io-channels = <&adc 1>; + #io-channel-cells = <1>; + io-channel-names = "parent"; + mux-controls = <&gpioA0mux>; + channels = "s0", "s1"; + }; + + adc2mux: adc2mux { + compatible = "io-channel-mux"; + io-channels = <&adc 2>; + #io-channel-cells = <1>; + io-channel-names = "parent"; + mux-controls = <&gpioA0mux>; + channels = "s0", "s1"; + }; + + adc3mux: adc3mux { + compatible = "io-channel-mux"; + io-channels = <&adc 3>; + #io-channel-cells = <1>; + io-channel-names = "parent"; + mux-controls = <&gpioA0mux>; + channels = "s0", "s1"; + }; + + adc4mux: adc4mux { + compatible = "io-channel-mux"; + io-channels = <&adc 4>; + #io-channel-cells = <1>; + io-channel-names = "parent"; + mux-controls = <&gpioA0mux>; + channels = "s0", "s1"; + }; + + adc5mux: adc5mux { + compatible = "io-channel-mux"; + io-channels = <&adc 5>; + #io-channel-cells = <1>; + io-channel-names = "parent"; + mux-controls = <&gpioA0mux>; + channels = "s0", "s1"; + }; + + adc6mux: adc6mux { + compatible = "io-channel-mux"; + io-channels = <&adc 6>; + #io-channel-cells = <1>; + io-channel-names = "parent"; + mux-controls = <&gpioA0mux>; + channels = "s0", "s1"; + }; + + adc7mux: adc7mux { + compatible = "io-channel-mux"; + io-channels = <&adc 7>; + #io-channel-cells = <1>; + io-channel-names = "parent"; + mux-controls = <&gpioA0mux>; + channels = "s0", "s1"; + }; + + adc8mux: adc8mux { + compatible = "io-channel-mux"; + io-channels = <&adc 8>; + #io-channel-cells = <1>; + io-channel-names = "parent"; + mux-controls = <&gpioA0mux>; + channels = "s0", "s1"; + }; + + adc9mux: adc9mux { + compatible = "io-channel-mux"; + io-channels = <&adc 9>; + #io-channel-cells = <1>; + io-channel-names = "parent"; + mux-controls = <&gpioA0mux>; + channels = "s0", "s1"; + }; + + adc10mux: adc10mux { + compatible = "io-channel-mux"; + io-channels = <&adc 10>; + #io-channel-cells = <1>; + io-channel-names = "parent"; + mux-controls = <&gpioA0mux>; + channels = "s0", "s1"; + }; + + adc11mux: adc11mux { + compatible = "io-channel-mux"; + io-channels = <&adc 11>; + #io-channel-cells = <1>; + io-channel-names = "parent"; + mux-controls = <&gpioA0mux>; + channels = "s0", "s1"; + }; + + adc12mux: adc12mux { + compatible = "io-channel-mux"; + io-channels = <&adc 12>; + #io-channel-cells = <1>; + io-channel-names = "parent"; + mux-controls = <&gpioA0mux>; + channels = "s0", "s1"; + }; + + adc13mux: adc13mux { + compatible = "io-channel-mux"; + io-channels = <&adc 13>; + #io-channel-cells = <1>; + io-channel-names = "parent"; + mux-controls = <&gpioA0mux>; + channels = "s0", "s1"; + }; + + iio-hwmon { + compatible = "iio-hwmon"; + io-channels = <&adc0mux 0>, <&adc0mux 1>, + <&adc1mux 0>, <&adc1mux 1>, + <&adc2mux 0>, <&adc2mux 1>, + <&adc3mux 0>, <&adc3mux 1>, + <&adc4mux 0>, <&adc4mux 1>, + <&adc5mux 0>, <&adc5mux 1>, + <&adc6mux 0>, <&adc6mux 1>, + <&adc7mux 0>, <&adc7mux 1>, + <&adc8mux 0>, <&adc8mux 1>, + <&adc9mux 0>, <&adc9mux 1>, + <&adc10mux 0>, <&adc10mux 1>, + <&adc11mux 0>, <&adc11mux 1>, + <&adc12mux 0>, <&adc12mux 1>, + <&adc13mux 0>, <&adc13mux 1>; + }; + + iio-hwmon-adc14 { + compatible = "iio-hwmon"; + io-channels = <&adc 14>; + }; + + iio-hwmon-battery { + compatible = "iio-hwmon"; + io-channels = <&adc 15>; + }; +}; + +&fmc { + status = "okay"; + flash@0 { + status = "okay"; + m25p,fast-read; + label = "bmc"; + /* spi-max-frequency = <50000000>; */ +#include "openbmc-flash-layout.dtsi" + }; +}; + +&spi1 { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_spi1_default>; + + flash@0 { + status = "okay"; + m25p,fast-read; + label = "pnor"; + /* spi-max-frequency = <100000000>; */ + }; +}; + +&uart1 { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_txd1_default + &pinctrl_rxd1_default + &pinctrl_ncts1_default + &pinctrl_nrts1_default>; +}; + +&uart2 { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_txd2_default + &pinctrl_rxd2_default>; +}; + +&uart3 { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_txd3_default + &pinctrl_rxd3_default>; +}; + +&uart4 { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_txd4_default + &pinctrl_rxd4_default>; +}; + +/* The BMC's uart */ +&uart5 { + status = "okay"; +}; + +&mac1 { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_rgmii2_default &pinctrl_mdio2_default>; +}; + +&i2c0 { + status = "okay"; +}; + +&i2c1 { + status = "okay"; +}; + +&i2c2 { + status = "okay"; +}; + +&i2c3 { + status = "okay"; + eeprom@50 { + compatible = "microchip,24c64", "atmel,24c64"; + reg = <0x50>; + pagesize = <32>; + }; + + inlet_mem2: tmp175@28 { + compatible = "ti,tmp175"; + reg = <0x28>; + }; + + inlet_cpu: tmp175@29 { + compatible = "ti,tmp175"; + reg = <0x29>; + }; + + inlet_mem1: tmp175@2a { + compatible = "ti,tmp175"; + reg = <0x2a>; + }; + + outlet_cpu: tmp175@2b { + compatible = "ti,tmp175"; + reg = <0x2b>; + }; + + outlet1: tmp175@2c { + compatible = "ti,tmp175"; + reg = <0x2c>; + }; + + outlet2: tmp175@2d { + compatible = "ti,tmp175"; + reg = <0x2d>; + }; +}; + +&i2c4 { + status = "okay"; + rtc@51 { + compatible = "nxp,pcf85063a"; + reg = <0x51>; + }; +}; + +&i2c5 { + status = "okay"; +}; + +&i2c6 { + status = "okay"; + psu@58 { + compatible = "pmbus"; + reg = <0x58>; + }; + + psu@59 { + compatible = "pmbus"; + reg = <0x59>; + }; +}; + +&i2c7 { + status = "okay"; +}; + +&i2c8 { + status = "okay"; +}; + +&i2c9 { + status = "okay"; +}; + +&gfx { + status = "okay"; + memory-region = <&gfx_memory>; +}; + +&pinctrl { + aspeed,external-nodes = <&gfx &lhc>; +}; + +&pwm_tacho { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pwm2_default &pinctrl_pwm3_default + &pinctrl_pwm4_default &pinctrl_pwm5_default + &pinctrl_pwm6_default &pinctrl_pwm7_default>; + + fan@0 { + reg = <0x02>; + aspeed,fan-tach-ch = /bits/ 8 <0x04>; + }; + + fan@1 { + reg = <0x02>; + aspeed,fan-tach-ch = /bits/ 8 <0x05>; + }; + + fan@2 { + reg = <0x03>; + aspeed,fan-tach-ch = /bits/ 8 <0x06>; + }; + + fan@3 { + reg = <0x03>; + aspeed,fan-tach-ch = /bits/ 8 <0x07>; + }; + + fan@4 { + reg = <0x04>; + aspeed,fan-tach-ch = /bits/ 8 <0x08>; + }; + + fan@5 { + reg = <0x04>; + aspeed,fan-tach-ch = /bits/ 8 <0x09>; + }; + + fan@6 { + reg = <0x05>; + aspeed,fan-tach-ch = /bits/ 8 <0x0a>; + }; + + fan@7 { + reg = <0x05>; + aspeed,fan-tach-ch = /bits/ 8 <0x0b>; + }; + + fan@8 { + reg = <0x06>; + aspeed,fan-tach-ch = /bits/ 8 <0x0c>; + }; + + fan@9 { + reg = <0x06>; + aspeed,fan-tach-ch = /bits/ 8 <0x0d>; + }; + + fan@10 { + reg = <0x07>; + aspeed,fan-tach-ch = /bits/ 8 <0x0e>; + }; + + fan@11 { + reg = <0x07>; + aspeed,fan-tach-ch = /bits/ 8 <0x0f>; + }; + +}; + +&vhub { + status = "okay"; +}; + +&adc { + status = "okay"; +}; + +&video { + status = "okay"; + memory-region = <&video_engine_memory>; +}; + +&gpio { + gpio-line-names = + /*A0-A7*/ "","","","S0_BMC_SPECIAL_BOOT","","","","", + /*B0-B7*/ "BMC_SELECT_EEPROM","","","", + "POWER_BUTTON","","","", + /*C0-C7*/ "","","","","","","","", + /*D0-D7*/ "","","","","","","","", + /*E0-E7*/ "","","","","","","","", + /*F0-F7*/ "","","BMC_SYS_PSON_L","S0_DDR_SAVE","PGOOD", + "S1_DDR_SAVE","","", + /*G0-G7*/ "S0_FW_BOOT_OK","SHD_REQ_L","","S0_OVERTEMP_L","","", + "","", + /*H0-H7*/ "","","","","","","","", + /*I0-I7*/ "","","S1_BMC_SPECIAL_BOOT","","","","","", + /*J0-J7*/ "S0_HIGHTEMP_L","S0_FAULT_L","S0_SCP_AUTH_FAIL_L","", + "","","","", + /*K0-K7*/ "","","","","","","","", + /*L0-L7*/ "","","","BMC_SYSRESET_L","SPI_AUTH_FAIL_L","","","", + /*M0-M7*/ "","","","","","","","", + /*N0-N7*/ "","","","","","","","", + /*O0-O7*/ "","","","","","","","", + /*P0-P7*/ "","","","","","","","", + /*Q0-Q7*/ "","","","","","UID_BUTTON","","", + /*R0-R7*/ "","","BMC_EXT_HIGHTEMP_L","","","RESET_BUTTON","","", + /*S0-S7*/ "","","","","","","","", + /*T0-T7*/ "","","","","","","","", + /*U0-U7*/ "","","","","","","","", + /*V0-V7*/ "","","","","","","","", + /*W0-W7*/ "","","","","","","","", + /*X0-X7*/ "","","","","","","","", + /*Y0-Y7*/ "","","","","","","","", + /*Z0-Z7*/ "S0_BMC_PLIMIT","S1_FAULT_L","S1_FW_BOOT_OK","","", + "S1_SCP_AUTH_FAIL_L","S1_OVERTEMP_L","", + /*AA0-AA7*/ "","","","","","","","", + /*AB0-AB7*/ "S1_HIGHTEMP_L","S1_BMC_PLIMIT","S0_BMC_DDR_ADDR", + "S1_BMC_DDR_ADR","","","","", + /*AC0-AC7*/ "SYS_PWR_GD","","","","","BMC_READY","SLAVE_PRESENT_L", + "BMC_OCP_PG"; +}; -- 2.28.0 ^ permalink raw reply related [flat|nested] 21+ messages in thread
* [PATCH 2/2] ARM: dts: aspeed: Add device tree for Ampere's Mt. Jade BMC @ 2020-12-08 4:37 ` Quan Nguyen 0 siblings, 0 replies; 21+ messages in thread From: Quan Nguyen @ 2020-12-08 4:37 UTC (permalink / raw) To: Rob Herring, Joel Stanley, Andrew Jeffery, Sam Ravnborg, Krzysztof Kozlowski, Linus Walleij, Arnd Bergmann, Mark Brown, Kuninori Morimoto, Geert Uytterhoeven, allen, devicetree, linux-kernel, linux-arm-kernel, linux-aspeed The Mt. Jade BMC is an ASPEED AST2500-based BMC for the Mt. Jade hardware reference platform with Ampere's Altra Processor Family. Reviewed-by: Andrew Jeffery <andrew@aj.id.au> Reviewed-by: Joel Stanley <joel@jms.id.au> Signed-off-by: Quan Nguyen <quan@os.amperecomputing.com> Signed-off-by: Phong Vo <phong@os.amperecomputing.com> Signed-off-by: Thang Q. Nguyen <thang@os.amperecomputing.com> --- arch/arm/boot/dts/Makefile | 1 + .../arm/boot/dts/aspeed-bmc-ampere-mtjade.dts | 558 ++++++++++++++++++ 2 files changed, 559 insertions(+) create mode 100644 arch/arm/boot/dts/aspeed-bmc-ampere-mtjade.dts diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile index 9f9f3e49132a..5da5e8f93554 100644 --- a/arch/arm/boot/dts/Makefile +++ b/arch/arm/boot/dts/Makefile @@ -1398,6 +1398,7 @@ dtb-$(CONFIG_ARCH_ASPEED) += \ aspeed-ast2500-evb.dtb \ aspeed-ast2600-evb.dtb \ aspeed-bmc-amd-ethanolx.dtb \ + aspeed-bmc-ampere-mtjade.dtb \ aspeed-bmc-arm-centriq2400-rep.dtb \ aspeed-bmc-arm-stardragon4800-rep2.dtb \ aspeed-bmc-bytedance-g220a.dtb \ diff --git a/arch/arm/boot/dts/aspeed-bmc-ampere-mtjade.dts b/arch/arm/boot/dts/aspeed-bmc-ampere-mtjade.dts new file mode 100644 index 000000000000..8f5ec22e51c2 --- /dev/null +++ b/arch/arm/boot/dts/aspeed-bmc-ampere-mtjade.dts @@ -0,0 +1,558 @@ +// SPDX-License-Identifier: GPL-2.0+ +/dts-v1/; +#include "aspeed-g5.dtsi" +#include <dt-bindings/gpio/aspeed-gpio.h> + +/ { + model = "Ampere Mt. Jade BMC"; + compatible = "ampere,mtjade-bmc", "aspeed,ast2500"; + + chosen { + stdout-path = &uart5; + bootargs = "console=ttyS4,115200 earlyprintk"; + }; + + memory@80000000 { + reg = <0x80000000 0x20000000>; + }; + + reserved-memory { + #address-cells = <1>; + #size-cells = <1>; + ranges; + + vga_memory: framebuffer@9f000000 { + no-map; + reg = <0x9f000000 0x01000000>; /* 16M */ + }; + + gfx_memory: framebuffer { + size = <0x01000000>; + alignment = <0x01000000>; + compatible = "shared-dma-pool"; + reusable; + }; + + video_engine_memory: jpegbuffer { + size = <0x02000000>; /* 32M */ + alignment = <0x01000000>; + compatible = "shared-dma-pool"; + reusable; + }; + }; + + leds { + compatible = "gpio-leds"; + + fault { + gpios = <&gpio ASPEED_GPIO(B, 6) GPIO_ACTIVE_HIGH>; + }; + + identify { + gpios = <&gpio ASPEED_GPIO(Q, 6) GPIO_ACTIVE_HIGH>; + }; + }; + + gpio-keys { + compatible = "gpio-keys"; + + shutdown_ack { + label = "SHUTDOWN_ACK"; + gpios = <&gpio ASPEED_GPIO(G, 2) GPIO_ACTIVE_LOW>; + linux,code = <ASPEED_GPIO(G, 2)>; + }; + + reboot_ack { + label = "REBOOT_ACK"; + gpios = <&gpio ASPEED_GPIO(J, 3) GPIO_ACTIVE_LOW>; + linux,code = <ASPEED_GPIO(J, 3)>; + }; + + S0_overtemp { + label = "S0_OVERTEMP"; + gpios = <&gpio ASPEED_GPIO(G, 3) GPIO_ACTIVE_LOW>; + linux,code = <ASPEED_GPIO(G, 3)>; + }; + + S0_hightemp { + label = "S0_HIGHTEMP"; + gpios = <&gpio ASPEED_GPIO(J, 0) GPIO_ACTIVE_LOW>; + linux,code = <ASPEED_GPIO(J, 0)>; + }; + + S0_cpu_fault { + label = "S0_CPU_FAULT"; + gpios = <&gpio ASPEED_GPIO(J, 1) GPIO_ACTIVE_HIGH>; + linux,code = <ASPEED_GPIO(J, 1)>; + }; + + S1_overtemp { + label = "S1_OVERTEMP"; + gpios = <&gpio ASPEED_GPIO(Z, 6) GPIO_ACTIVE_LOW>; + linux,code = <ASPEED_GPIO(Z, 6)>; + }; + + S1_hightemp { + label = "S1_HIGHTEMP"; + gpios = <&gpio ASPEED_GPIO(AB, 0) GPIO_ACTIVE_LOW>; + linux,code = <ASPEED_GPIO(AB, 0)>; + }; + + S1_cpu_fault { + label = "S1_CPU_FAULT"; + gpios = <&gpio ASPEED_GPIO(Z, 1) GPIO_ACTIVE_HIGH>; + linux,code = <ASPEED_GPIO(Z, 1)>; + }; + + id_button { + label = "ID_BUTTON"; + gpios = <&gpio ASPEED_GPIO(Q, 5) GPIO_ACTIVE_LOW>; + linux,code = <ASPEED_GPIO(Q, 5)>; + }; + + }; + + gpioA0mux: mux-controller { + compatible = "gpio-mux"; + #mux-control-cells = <0>; + mux-gpios = <&gpio ASPEED_GPIO(A, 0) GPIO_ACTIVE_LOW>; + }; + + adc0mux: adc0mux { + compatible = "io-channel-mux"; + io-channels = <&adc 0>; + #io-channel-cells = <1>; + io-channel-names = "parent"; + mux-controls = <&gpioA0mux>; + channels = "s0", "s1"; + }; + + adc1mux: adc1mux { + compatible = "io-channel-mux"; + io-channels = <&adc 1>; + #io-channel-cells = <1>; + io-channel-names = "parent"; + mux-controls = <&gpioA0mux>; + channels = "s0", "s1"; + }; + + adc2mux: adc2mux { + compatible = "io-channel-mux"; + io-channels = <&adc 2>; + #io-channel-cells = <1>; + io-channel-names = "parent"; + mux-controls = <&gpioA0mux>; + channels = "s0", "s1"; + }; + + adc3mux: adc3mux { + compatible = "io-channel-mux"; + io-channels = <&adc 3>; + #io-channel-cells = <1>; + io-channel-names = "parent"; + mux-controls = <&gpioA0mux>; + channels = "s0", "s1"; + }; + + adc4mux: adc4mux { + compatible = "io-channel-mux"; + io-channels = <&adc 4>; + #io-channel-cells = <1>; + io-channel-names = "parent"; + mux-controls = <&gpioA0mux>; + channels = "s0", "s1"; + }; + + adc5mux: adc5mux { + compatible = "io-channel-mux"; + io-channels = <&adc 5>; + #io-channel-cells = <1>; + io-channel-names = "parent"; + mux-controls = <&gpioA0mux>; + channels = "s0", "s1"; + }; + + adc6mux: adc6mux { + compatible = "io-channel-mux"; + io-channels = <&adc 6>; + #io-channel-cells = <1>; + io-channel-names = "parent"; + mux-controls = <&gpioA0mux>; + channels = "s0", "s1"; + }; + + adc7mux: adc7mux { + compatible = "io-channel-mux"; + io-channels = <&adc 7>; + #io-channel-cells = <1>; + io-channel-names = "parent"; + mux-controls = <&gpioA0mux>; + channels = "s0", "s1"; + }; + + adc8mux: adc8mux { + compatible = "io-channel-mux"; + io-channels = <&adc 8>; + #io-channel-cells = <1>; + io-channel-names = "parent"; + mux-controls = <&gpioA0mux>; + channels = "s0", "s1"; + }; + + adc9mux: adc9mux { + compatible = "io-channel-mux"; + io-channels = <&adc 9>; + #io-channel-cells = <1>; + io-channel-names = "parent"; + mux-controls = <&gpioA0mux>; + channels = "s0", "s1"; + }; + + adc10mux: adc10mux { + compatible = "io-channel-mux"; + io-channels = <&adc 10>; + #io-channel-cells = <1>; + io-channel-names = "parent"; + mux-controls = <&gpioA0mux>; + channels = "s0", "s1"; + }; + + adc11mux: adc11mux { + compatible = "io-channel-mux"; + io-channels = <&adc 11>; + #io-channel-cells = <1>; + io-channel-names = "parent"; + mux-controls = <&gpioA0mux>; + channels = "s0", "s1"; + }; + + adc12mux: adc12mux { + compatible = "io-channel-mux"; + io-channels = <&adc 12>; + #io-channel-cells = <1>; + io-channel-names = "parent"; + mux-controls = <&gpioA0mux>; + channels = "s0", "s1"; + }; + + adc13mux: adc13mux { + compatible = "io-channel-mux"; + io-channels = <&adc 13>; + #io-channel-cells = <1>; + io-channel-names = "parent"; + mux-controls = <&gpioA0mux>; + channels = "s0", "s1"; + }; + + iio-hwmon { + compatible = "iio-hwmon"; + io-channels = <&adc0mux 0>, <&adc0mux 1>, + <&adc1mux 0>, <&adc1mux 1>, + <&adc2mux 0>, <&adc2mux 1>, + <&adc3mux 0>, <&adc3mux 1>, + <&adc4mux 0>, <&adc4mux 1>, + <&adc5mux 0>, <&adc5mux 1>, + <&adc6mux 0>, <&adc6mux 1>, + <&adc7mux 0>, <&adc7mux 1>, + <&adc8mux 0>, <&adc8mux 1>, + <&adc9mux 0>, <&adc9mux 1>, + <&adc10mux 0>, <&adc10mux 1>, + <&adc11mux 0>, <&adc11mux 1>, + <&adc12mux 0>, <&adc12mux 1>, + <&adc13mux 0>, <&adc13mux 1>; + }; + + iio-hwmon-adc14 { + compatible = "iio-hwmon"; + io-channels = <&adc 14>; + }; + + iio-hwmon-battery { + compatible = "iio-hwmon"; + io-channels = <&adc 15>; + }; +}; + +&fmc { + status = "okay"; + flash@0 { + status = "okay"; + m25p,fast-read; + label = "bmc"; + /* spi-max-frequency = <50000000>; */ +#include "openbmc-flash-layout.dtsi" + }; +}; + +&spi1 { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_spi1_default>; + + flash@0 { + status = "okay"; + m25p,fast-read; + label = "pnor"; + /* spi-max-frequency = <100000000>; */ + }; +}; + +&uart1 { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_txd1_default + &pinctrl_rxd1_default + &pinctrl_ncts1_default + &pinctrl_nrts1_default>; +}; + +&uart2 { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_txd2_default + &pinctrl_rxd2_default>; +}; + +&uart3 { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_txd3_default + &pinctrl_rxd3_default>; +}; + +&uart4 { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_txd4_default + &pinctrl_rxd4_default>; +}; + +/* The BMC's uart */ +&uart5 { + status = "okay"; +}; + +&mac1 { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_rgmii2_default &pinctrl_mdio2_default>; +}; + +&i2c0 { + status = "okay"; +}; + +&i2c1 { + status = "okay"; +}; + +&i2c2 { + status = "okay"; +}; + +&i2c3 { + status = "okay"; + eeprom@50 { + compatible = "microchip,24c64", "atmel,24c64"; + reg = <0x50>; + pagesize = <32>; + }; + + inlet_mem2: tmp175@28 { + compatible = "ti,tmp175"; + reg = <0x28>; + }; + + inlet_cpu: tmp175@29 { + compatible = "ti,tmp175"; + reg = <0x29>; + }; + + inlet_mem1: tmp175@2a { + compatible = "ti,tmp175"; + reg = <0x2a>; + }; + + outlet_cpu: tmp175@2b { + compatible = "ti,tmp175"; + reg = <0x2b>; + }; + + outlet1: tmp175@2c { + compatible = "ti,tmp175"; + reg = <0x2c>; + }; + + outlet2: tmp175@2d { + compatible = "ti,tmp175"; + reg = <0x2d>; + }; +}; + +&i2c4 { + status = "okay"; + rtc@51 { + compatible = "nxp,pcf85063a"; + reg = <0x51>; + }; +}; + +&i2c5 { + status = "okay"; +}; + +&i2c6 { + status = "okay"; + psu@58 { + compatible = "pmbus"; + reg = <0x58>; + }; + + psu@59 { + compatible = "pmbus"; + reg = <0x59>; + }; +}; + +&i2c7 { + status = "okay"; +}; + +&i2c8 { + status = "okay"; +}; + +&i2c9 { + status = "okay"; +}; + +&gfx { + status = "okay"; + memory-region = <&gfx_memory>; +}; + +&pinctrl { + aspeed,external-nodes = <&gfx &lhc>; +}; + +&pwm_tacho { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pwm2_default &pinctrl_pwm3_default + &pinctrl_pwm4_default &pinctrl_pwm5_default + &pinctrl_pwm6_default &pinctrl_pwm7_default>; + + fan@0 { + reg = <0x02>; + aspeed,fan-tach-ch = /bits/ 8 <0x04>; + }; + + fan@1 { + reg = <0x02>; + aspeed,fan-tach-ch = /bits/ 8 <0x05>; + }; + + fan@2 { + reg = <0x03>; + aspeed,fan-tach-ch = /bits/ 8 <0x06>; + }; + + fan@3 { + reg = <0x03>; + aspeed,fan-tach-ch = /bits/ 8 <0x07>; + }; + + fan@4 { + reg = <0x04>; + aspeed,fan-tach-ch = /bits/ 8 <0x08>; + }; + + fan@5 { + reg = <0x04>; + aspeed,fan-tach-ch = /bits/ 8 <0x09>; + }; + + fan@6 { + reg = <0x05>; + aspeed,fan-tach-ch = /bits/ 8 <0x0a>; + }; + + fan@7 { + reg = <0x05>; + aspeed,fan-tach-ch = /bits/ 8 <0x0b>; + }; + + fan@8 { + reg = <0x06>; + aspeed,fan-tach-ch = /bits/ 8 <0x0c>; + }; + + fan@9 { + reg = <0x06>; + aspeed,fan-tach-ch = /bits/ 8 <0x0d>; + }; + + fan@10 { + reg = <0x07>; + aspeed,fan-tach-ch = /bits/ 8 <0x0e>; + }; + + fan@11 { + reg = <0x07>; + aspeed,fan-tach-ch = /bits/ 8 <0x0f>; + }; + +}; + +&vhub { + status = "okay"; +}; + +&adc { + status = "okay"; +}; + +&video { + status = "okay"; + memory-region = <&video_engine_memory>; +}; + +&gpio { + gpio-line-names = + /*A0-A7*/ "","","","S0_BMC_SPECIAL_BOOT","","","","", + /*B0-B7*/ "BMC_SELECT_EEPROM","","","", + "POWER_BUTTON","","","", + /*C0-C7*/ "","","","","","","","", + /*D0-D7*/ "","","","","","","","", + /*E0-E7*/ "","","","","","","","", + /*F0-F7*/ "","","BMC_SYS_PSON_L","S0_DDR_SAVE","PGOOD", + "S1_DDR_SAVE","","", + /*G0-G7*/ "S0_FW_BOOT_OK","SHD_REQ_L","","S0_OVERTEMP_L","","", + "","", + /*H0-H7*/ "","","","","","","","", + /*I0-I7*/ "","","S1_BMC_SPECIAL_BOOT","","","","","", + /*J0-J7*/ "S0_HIGHTEMP_L","S0_FAULT_L","S0_SCP_AUTH_FAIL_L","", + "","","","", + /*K0-K7*/ "","","","","","","","", + /*L0-L7*/ "","","","BMC_SYSRESET_L","SPI_AUTH_FAIL_L","","","", + /*M0-M7*/ "","","","","","","","", + /*N0-N7*/ "","","","","","","","", + /*O0-O7*/ "","","","","","","","", + /*P0-P7*/ "","","","","","","","", + /*Q0-Q7*/ "","","","","","UID_BUTTON","","", + /*R0-R7*/ "","","BMC_EXT_HIGHTEMP_L","","","RESET_BUTTON","","", + /*S0-S7*/ "","","","","","","","", + /*T0-T7*/ "","","","","","","","", + /*U0-U7*/ "","","","","","","","", + /*V0-V7*/ "","","","","","","","", + /*W0-W7*/ "","","","","","","","", + /*X0-X7*/ "","","","","","","","", + /*Y0-Y7*/ "","","","","","","","", + /*Z0-Z7*/ "S0_BMC_PLIMIT","S1_FAULT_L","S1_FW_BOOT_OK","","", + "S1_SCP_AUTH_FAIL_L","S1_OVERTEMP_L","", + /*AA0-AA7*/ "","","","","","","","", + /*AB0-AB7*/ "S1_HIGHTEMP_L","S1_BMC_PLIMIT","S0_BMC_DDR_ADDR", + "S1_BMC_DDR_ADR","","","","", + /*AC0-AC7*/ "SYS_PWR_GD","","","","","BMC_READY","SLAVE_PRESENT_L", + "BMC_OCP_PG"; +}; -- 2.28.0 _______________________________________________ linux-arm-kernel mailing list linux-arm-kernel@lists.infradead.org http://lists.infradead.org/mailman/listinfo/linux-arm-kernel ^ permalink raw reply related [flat|nested] 21+ messages in thread
* Re: [PATCH 2/2] ARM: dts: aspeed: Add device tree for Ampere's Mt. Jade BMC 2020-12-08 4:37 ` Quan Nguyen @ 2020-12-08 4:41 ` Joel Stanley -1 siblings, 0 replies; 21+ messages in thread From: Joel Stanley @ 2020-12-08 4:41 UTC (permalink / raw) To: Quan Nguyen Cc: Rob Herring, Andrew Jeffery, Sam Ravnborg, Krzysztof Kozlowski, Linus Walleij, Arnd Bergmann, Mark Brown, Kuninori Morimoto, Geert Uytterhoeven, allen, devicetree, Linux Kernel Mailing List, Linux ARM, linux-aspeed On Tue, 8 Dec 2020 at 04:37, Quan Nguyen <quan@os.amperecomputing.com> wrote: > > The Mt. Jade BMC is an ASPEED AST2500-based BMC for the Mt. Jade > hardware reference platform with Ampere's Altra Processor Family. > > Reviewed-by: Andrew Jeffery <andrew@aj.id.au> > Reviewed-by: Joel Stanley <joel@jms.id.au> > Signed-off-by: Quan Nguyen <quan@os.amperecomputing.com> > Signed-off-by: Phong Vo <phong@os.amperecomputing.com> > Signed-off-by: Thang Q. Nguyen <thang@os.amperecomputing.com> Thanks, I've applied this to the aspeed tree. Cheers, Joel > --- > arch/arm/boot/dts/Makefile | 1 + > .../arm/boot/dts/aspeed-bmc-ampere-mtjade.dts | 558 ++++++++++++++++++ > 2 files changed, 559 insertions(+) > create mode 100644 arch/arm/boot/dts/aspeed-bmc-ampere-mtjade.dts > > diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile > index 9f9f3e49132a..5da5e8f93554 100644 > --- a/arch/arm/boot/dts/Makefile > +++ b/arch/arm/boot/dts/Makefile > @@ -1398,6 +1398,7 @@ dtb-$(CONFIG_ARCH_ASPEED) += \ > aspeed-ast2500-evb.dtb \ > aspeed-ast2600-evb.dtb \ > aspeed-bmc-amd-ethanolx.dtb \ > + aspeed-bmc-ampere-mtjade.dtb \ > aspeed-bmc-arm-centriq2400-rep.dtb \ > aspeed-bmc-arm-stardragon4800-rep2.dtb \ > aspeed-bmc-bytedance-g220a.dtb \ > diff --git a/arch/arm/boot/dts/aspeed-bmc-ampere-mtjade.dts b/arch/arm/boot/dts/aspeed-bmc-ampere-mtjade.dts > new file mode 100644 > index 000000000000..8f5ec22e51c2 > --- /dev/null > +++ b/arch/arm/boot/dts/aspeed-bmc-ampere-mtjade.dts > @@ -0,0 +1,558 @@ > +// SPDX-License-Identifier: GPL-2.0+ > +/dts-v1/; > +#include "aspeed-g5.dtsi" > +#include <dt-bindings/gpio/aspeed-gpio.h> > + > +/ { > + model = "Ampere Mt. Jade BMC"; > + compatible = "ampere,mtjade-bmc", "aspeed,ast2500"; > + > + chosen { > + stdout-path = &uart5; > + bootargs = "console=ttyS4,115200 earlyprintk"; > + }; > + > + memory@80000000 { > + reg = <0x80000000 0x20000000>; > + }; > + > + reserved-memory { > + #address-cells = <1>; > + #size-cells = <1>; > + ranges; > + > + vga_memory: framebuffer@9f000000 { > + no-map; > + reg = <0x9f000000 0x01000000>; /* 16M */ > + }; > + > + gfx_memory: framebuffer { > + size = <0x01000000>; > + alignment = <0x01000000>; > + compatible = "shared-dma-pool"; > + reusable; > + }; > + > + video_engine_memory: jpegbuffer { > + size = <0x02000000>; /* 32M */ > + alignment = <0x01000000>; > + compatible = "shared-dma-pool"; > + reusable; > + }; > + }; > + > + leds { > + compatible = "gpio-leds"; > + > + fault { > + gpios = <&gpio ASPEED_GPIO(B, 6) GPIO_ACTIVE_HIGH>; > + }; > + > + identify { > + gpios = <&gpio ASPEED_GPIO(Q, 6) GPIO_ACTIVE_HIGH>; > + }; > + }; > + > + gpio-keys { > + compatible = "gpio-keys"; > + > + shutdown_ack { > + label = "SHUTDOWN_ACK"; > + gpios = <&gpio ASPEED_GPIO(G, 2) GPIO_ACTIVE_LOW>; > + linux,code = <ASPEED_GPIO(G, 2)>; > + }; > + > + reboot_ack { > + label = "REBOOT_ACK"; > + gpios = <&gpio ASPEED_GPIO(J, 3) GPIO_ACTIVE_LOW>; > + linux,code = <ASPEED_GPIO(J, 3)>; > + }; > + > + S0_overtemp { > + label = "S0_OVERTEMP"; > + gpios = <&gpio ASPEED_GPIO(G, 3) GPIO_ACTIVE_LOW>; > + linux,code = <ASPEED_GPIO(G, 3)>; > + }; > + > + S0_hightemp { > + label = "S0_HIGHTEMP"; > + gpios = <&gpio ASPEED_GPIO(J, 0) GPIO_ACTIVE_LOW>; > + linux,code = <ASPEED_GPIO(J, 0)>; > + }; > + > + S0_cpu_fault { > + label = "S0_CPU_FAULT"; > + gpios = <&gpio ASPEED_GPIO(J, 1) GPIO_ACTIVE_HIGH>; > + linux,code = <ASPEED_GPIO(J, 1)>; > + }; > + > + S1_overtemp { > + label = "S1_OVERTEMP"; > + gpios = <&gpio ASPEED_GPIO(Z, 6) GPIO_ACTIVE_LOW>; > + linux,code = <ASPEED_GPIO(Z, 6)>; > + }; > + > + S1_hightemp { > + label = "S1_HIGHTEMP"; > + gpios = <&gpio ASPEED_GPIO(AB, 0) GPIO_ACTIVE_LOW>; > + linux,code = <ASPEED_GPIO(AB, 0)>; > + }; > + > + S1_cpu_fault { > + label = "S1_CPU_FAULT"; > + gpios = <&gpio ASPEED_GPIO(Z, 1) GPIO_ACTIVE_HIGH>; > + linux,code = <ASPEED_GPIO(Z, 1)>; > + }; > + > + id_button { > + label = "ID_BUTTON"; > + gpios = <&gpio ASPEED_GPIO(Q, 5) GPIO_ACTIVE_LOW>; > + linux,code = <ASPEED_GPIO(Q, 5)>; > + }; > + > + }; > + > + gpioA0mux: mux-controller { > + compatible = "gpio-mux"; > + #mux-control-cells = <0>; > + mux-gpios = <&gpio ASPEED_GPIO(A, 0) GPIO_ACTIVE_LOW>; > + }; > + > + adc0mux: adc0mux { > + compatible = "io-channel-mux"; > + io-channels = <&adc 0>; > + #io-channel-cells = <1>; > + io-channel-names = "parent"; > + mux-controls = <&gpioA0mux>; > + channels = "s0", "s1"; > + }; > + > + adc1mux: adc1mux { > + compatible = "io-channel-mux"; > + io-channels = <&adc 1>; > + #io-channel-cells = <1>; > + io-channel-names = "parent"; > + mux-controls = <&gpioA0mux>; > + channels = "s0", "s1"; > + }; > + > + adc2mux: adc2mux { > + compatible = "io-channel-mux"; > + io-channels = <&adc 2>; > + #io-channel-cells = <1>; > + io-channel-names = "parent"; > + mux-controls = <&gpioA0mux>; > + channels = "s0", "s1"; > + }; > + > + adc3mux: adc3mux { > + compatible = "io-channel-mux"; > + io-channels = <&adc 3>; > + #io-channel-cells = <1>; > + io-channel-names = "parent"; > + mux-controls = <&gpioA0mux>; > + channels = "s0", "s1"; > + }; > + > + adc4mux: adc4mux { > + compatible = "io-channel-mux"; > + io-channels = <&adc 4>; > + #io-channel-cells = <1>; > + io-channel-names = "parent"; > + mux-controls = <&gpioA0mux>; > + channels = "s0", "s1"; > + }; > + > + adc5mux: adc5mux { > + compatible = "io-channel-mux"; > + io-channels = <&adc 5>; > + #io-channel-cells = <1>; > + io-channel-names = "parent"; > + mux-controls = <&gpioA0mux>; > + channels = "s0", "s1"; > + }; > + > + adc6mux: adc6mux { > + compatible = "io-channel-mux"; > + io-channels = <&adc 6>; > + #io-channel-cells = <1>; > + io-channel-names = "parent"; > + mux-controls = <&gpioA0mux>; > + channels = "s0", "s1"; > + }; > + > + adc7mux: adc7mux { > + compatible = "io-channel-mux"; > + io-channels = <&adc 7>; > + #io-channel-cells = <1>; > + io-channel-names = "parent"; > + mux-controls = <&gpioA0mux>; > + channels = "s0", "s1"; > + }; > + > + adc8mux: adc8mux { > + compatible = "io-channel-mux"; > + io-channels = <&adc 8>; > + #io-channel-cells = <1>; > + io-channel-names = "parent"; > + mux-controls = <&gpioA0mux>; > + channels = "s0", "s1"; > + }; > + > + adc9mux: adc9mux { > + compatible = "io-channel-mux"; > + io-channels = <&adc 9>; > + #io-channel-cells = <1>; > + io-channel-names = "parent"; > + mux-controls = <&gpioA0mux>; > + channels = "s0", "s1"; > + }; > + > + adc10mux: adc10mux { > + compatible = "io-channel-mux"; > + io-channels = <&adc 10>; > + #io-channel-cells = <1>; > + io-channel-names = "parent"; > + mux-controls = <&gpioA0mux>; > + channels = "s0", "s1"; > + }; > + > + adc11mux: adc11mux { > + compatible = "io-channel-mux"; > + io-channels = <&adc 11>; > + #io-channel-cells = <1>; > + io-channel-names = "parent"; > + mux-controls = <&gpioA0mux>; > + channels = "s0", "s1"; > + }; > + > + adc12mux: adc12mux { > + compatible = "io-channel-mux"; > + io-channels = <&adc 12>; > + #io-channel-cells = <1>; > + io-channel-names = "parent"; > + mux-controls = <&gpioA0mux>; > + channels = "s0", "s1"; > + }; > + > + adc13mux: adc13mux { > + compatible = "io-channel-mux"; > + io-channels = <&adc 13>; > + #io-channel-cells = <1>; > + io-channel-names = "parent"; > + mux-controls = <&gpioA0mux>; > + channels = "s0", "s1"; > + }; > + > + iio-hwmon { > + compatible = "iio-hwmon"; > + io-channels = <&adc0mux 0>, <&adc0mux 1>, > + <&adc1mux 0>, <&adc1mux 1>, > + <&adc2mux 0>, <&adc2mux 1>, > + <&adc3mux 0>, <&adc3mux 1>, > + <&adc4mux 0>, <&adc4mux 1>, > + <&adc5mux 0>, <&adc5mux 1>, > + <&adc6mux 0>, <&adc6mux 1>, > + <&adc7mux 0>, <&adc7mux 1>, > + <&adc8mux 0>, <&adc8mux 1>, > + <&adc9mux 0>, <&adc9mux 1>, > + <&adc10mux 0>, <&adc10mux 1>, > + <&adc11mux 0>, <&adc11mux 1>, > + <&adc12mux 0>, <&adc12mux 1>, > + <&adc13mux 0>, <&adc13mux 1>; > + }; > + > + iio-hwmon-adc14 { > + compatible = "iio-hwmon"; > + io-channels = <&adc 14>; > + }; > + > + iio-hwmon-battery { > + compatible = "iio-hwmon"; > + io-channels = <&adc 15>; > + }; > +}; > + > +&fmc { > + status = "okay"; > + flash@0 { > + status = "okay"; > + m25p,fast-read; > + label = "bmc"; > + /* spi-max-frequency = <50000000>; */ > +#include "openbmc-flash-layout.dtsi" > + }; > +}; > + > +&spi1 { > + status = "okay"; > + pinctrl-names = "default"; > + pinctrl-0 = <&pinctrl_spi1_default>; > + > + flash@0 { > + status = "okay"; > + m25p,fast-read; > + label = "pnor"; > + /* spi-max-frequency = <100000000>; */ > + }; > +}; > + > +&uart1 { > + status = "okay"; > + pinctrl-names = "default"; > + pinctrl-0 = <&pinctrl_txd1_default > + &pinctrl_rxd1_default > + &pinctrl_ncts1_default > + &pinctrl_nrts1_default>; > +}; > + > +&uart2 { > + status = "okay"; > + pinctrl-names = "default"; > + pinctrl-0 = <&pinctrl_txd2_default > + &pinctrl_rxd2_default>; > +}; > + > +&uart3 { > + status = "okay"; > + pinctrl-names = "default"; > + pinctrl-0 = <&pinctrl_txd3_default > + &pinctrl_rxd3_default>; > +}; > + > +&uart4 { > + status = "okay"; > + pinctrl-names = "default"; > + pinctrl-0 = <&pinctrl_txd4_default > + &pinctrl_rxd4_default>; > +}; > + > +/* The BMC's uart */ > +&uart5 { > + status = "okay"; > +}; > + > +&mac1 { > + status = "okay"; > + pinctrl-names = "default"; > + pinctrl-0 = <&pinctrl_rgmii2_default &pinctrl_mdio2_default>; > +}; > + > +&i2c0 { > + status = "okay"; > +}; > + > +&i2c1 { > + status = "okay"; > +}; > + > +&i2c2 { > + status = "okay"; > +}; > + > +&i2c3 { > + status = "okay"; > + eeprom@50 { > + compatible = "microchip,24c64", "atmel,24c64"; > + reg = <0x50>; > + pagesize = <32>; > + }; > + > + inlet_mem2: tmp175@28 { > + compatible = "ti,tmp175"; > + reg = <0x28>; > + }; > + > + inlet_cpu: tmp175@29 { > + compatible = "ti,tmp175"; > + reg = <0x29>; > + }; > + > + inlet_mem1: tmp175@2a { > + compatible = "ti,tmp175"; > + reg = <0x2a>; > + }; > + > + outlet_cpu: tmp175@2b { > + compatible = "ti,tmp175"; > + reg = <0x2b>; > + }; > + > + outlet1: tmp175@2c { > + compatible = "ti,tmp175"; > + reg = <0x2c>; > + }; > + > + outlet2: tmp175@2d { > + compatible = "ti,tmp175"; > + reg = <0x2d>; > + }; > +}; > + > +&i2c4 { > + status = "okay"; > + rtc@51 { > + compatible = "nxp,pcf85063a"; > + reg = <0x51>; > + }; > +}; > + > +&i2c5 { > + status = "okay"; > +}; > + > +&i2c6 { > + status = "okay"; > + psu@58 { > + compatible = "pmbus"; > + reg = <0x58>; > + }; > + > + psu@59 { > + compatible = "pmbus"; > + reg = <0x59>; > + }; > +}; > + > +&i2c7 { > + status = "okay"; > +}; > + > +&i2c8 { > + status = "okay"; > +}; > + > +&i2c9 { > + status = "okay"; > +}; > + > +&gfx { > + status = "okay"; > + memory-region = <&gfx_memory>; > +}; > + > +&pinctrl { > + aspeed,external-nodes = <&gfx &lhc>; > +}; > + > +&pwm_tacho { > + status = "okay"; > + pinctrl-names = "default"; > + pinctrl-0 = <&pinctrl_pwm2_default &pinctrl_pwm3_default > + &pinctrl_pwm4_default &pinctrl_pwm5_default > + &pinctrl_pwm6_default &pinctrl_pwm7_default>; > + > + fan@0 { > + reg = <0x02>; > + aspeed,fan-tach-ch = /bits/ 8 <0x04>; > + }; > + > + fan@1 { > + reg = <0x02>; > + aspeed,fan-tach-ch = /bits/ 8 <0x05>; > + }; > + > + fan@2 { > + reg = <0x03>; > + aspeed,fan-tach-ch = /bits/ 8 <0x06>; > + }; > + > + fan@3 { > + reg = <0x03>; > + aspeed,fan-tach-ch = /bits/ 8 <0x07>; > + }; > + > + fan@4 { > + reg = <0x04>; > + aspeed,fan-tach-ch = /bits/ 8 <0x08>; > + }; > + > + fan@5 { > + reg = <0x04>; > + aspeed,fan-tach-ch = /bits/ 8 <0x09>; > + }; > + > + fan@6 { > + reg = <0x05>; > + aspeed,fan-tach-ch = /bits/ 8 <0x0a>; > + }; > + > + fan@7 { > + reg = <0x05>; > + aspeed,fan-tach-ch = /bits/ 8 <0x0b>; > + }; > + > + fan@8 { > + reg = <0x06>; > + aspeed,fan-tach-ch = /bits/ 8 <0x0c>; > + }; > + > + fan@9 { > + reg = <0x06>; > + aspeed,fan-tach-ch = /bits/ 8 <0x0d>; > + }; > + > + fan@10 { > + reg = <0x07>; > + aspeed,fan-tach-ch = /bits/ 8 <0x0e>; > + }; > + > + fan@11 { > + reg = <0x07>; > + aspeed,fan-tach-ch = /bits/ 8 <0x0f>; > + }; > + > +}; > + > +&vhub { > + status = "okay"; > +}; > + > +&adc { > + status = "okay"; > +}; > + > +&video { > + status = "okay"; > + memory-region = <&video_engine_memory>; > +}; > + > +&gpio { > + gpio-line-names = > + /*A0-A7*/ "","","","S0_BMC_SPECIAL_BOOT","","","","", > + /*B0-B7*/ "BMC_SELECT_EEPROM","","","", > + "POWER_BUTTON","","","", > + /*C0-C7*/ "","","","","","","","", > + /*D0-D7*/ "","","","","","","","", > + /*E0-E7*/ "","","","","","","","", > + /*F0-F7*/ "","","BMC_SYS_PSON_L","S0_DDR_SAVE","PGOOD", > + "S1_DDR_SAVE","","", > + /*G0-G7*/ "S0_FW_BOOT_OK","SHD_REQ_L","","S0_OVERTEMP_L","","", > + "","", > + /*H0-H7*/ "","","","","","","","", > + /*I0-I7*/ "","","S1_BMC_SPECIAL_BOOT","","","","","", > + /*J0-J7*/ "S0_HIGHTEMP_L","S0_FAULT_L","S0_SCP_AUTH_FAIL_L","", > + "","","","", > + /*K0-K7*/ "","","","","","","","", > + /*L0-L7*/ "","","","BMC_SYSRESET_L","SPI_AUTH_FAIL_L","","","", > + /*M0-M7*/ "","","","","","","","", > + /*N0-N7*/ "","","","","","","","", > + /*O0-O7*/ "","","","","","","","", > + /*P0-P7*/ "","","","","","","","", > + /*Q0-Q7*/ "","","","","","UID_BUTTON","","", > + /*R0-R7*/ "","","BMC_EXT_HIGHTEMP_L","","","RESET_BUTTON","","", > + /*S0-S7*/ "","","","","","","","", > + /*T0-T7*/ "","","","","","","","", > + /*U0-U7*/ "","","","","","","","", > + /*V0-V7*/ "","","","","","","","", > + /*W0-W7*/ "","","","","","","","", > + /*X0-X7*/ "","","","","","","","", > + /*Y0-Y7*/ "","","","","","","","", > + /*Z0-Z7*/ "S0_BMC_PLIMIT","S1_FAULT_L","S1_FW_BOOT_OK","","", > + "S1_SCP_AUTH_FAIL_L","S1_OVERTEMP_L","", > + /*AA0-AA7*/ "","","","","","","","", > + /*AB0-AB7*/ "S1_HIGHTEMP_L","S1_BMC_PLIMIT","S0_BMC_DDR_ADDR", > + "S1_BMC_DDR_ADR","","","","", > + /*AC0-AC7*/ "SYS_PWR_GD","","","","","BMC_READY","SLAVE_PRESENT_L", > + "BMC_OCP_PG"; > +}; > -- > 2.28.0 > ^ permalink raw reply [flat|nested] 21+ messages in thread
* Re: [PATCH 2/2] ARM: dts: aspeed: Add device tree for Ampere's Mt. Jade BMC @ 2020-12-08 4:41 ` Joel Stanley 0 siblings, 0 replies; 21+ messages in thread From: Joel Stanley @ 2020-12-08 4:41 UTC (permalink / raw) To: Quan Nguyen Cc: devicetree, Kuninori Morimoto, Arnd Bergmann, Andrew Jeffery, allen, Linus Walleij, Linux Kernel Mailing List, Krzysztof Kozlowski, linux-aspeed, Rob Herring, Mark Brown, Geert Uytterhoeven, Sam Ravnborg, Linux ARM On Tue, 8 Dec 2020 at 04:37, Quan Nguyen <quan@os.amperecomputing.com> wrote: > > The Mt. Jade BMC is an ASPEED AST2500-based BMC for the Mt. Jade > hardware reference platform with Ampere's Altra Processor Family. > > Reviewed-by: Andrew Jeffery <andrew@aj.id.au> > Reviewed-by: Joel Stanley <joel@jms.id.au> > Signed-off-by: Quan Nguyen <quan@os.amperecomputing.com> > Signed-off-by: Phong Vo <phong@os.amperecomputing.com> > Signed-off-by: Thang Q. Nguyen <thang@os.amperecomputing.com> Thanks, I've applied this to the aspeed tree. Cheers, Joel > --- > arch/arm/boot/dts/Makefile | 1 + > .../arm/boot/dts/aspeed-bmc-ampere-mtjade.dts | 558 ++++++++++++++++++ > 2 files changed, 559 insertions(+) > create mode 100644 arch/arm/boot/dts/aspeed-bmc-ampere-mtjade.dts > > diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile > index 9f9f3e49132a..5da5e8f93554 100644 > --- a/arch/arm/boot/dts/Makefile > +++ b/arch/arm/boot/dts/Makefile > @@ -1398,6 +1398,7 @@ dtb-$(CONFIG_ARCH_ASPEED) += \ > aspeed-ast2500-evb.dtb \ > aspeed-ast2600-evb.dtb \ > aspeed-bmc-amd-ethanolx.dtb \ > + aspeed-bmc-ampere-mtjade.dtb \ > aspeed-bmc-arm-centriq2400-rep.dtb \ > aspeed-bmc-arm-stardragon4800-rep2.dtb \ > aspeed-bmc-bytedance-g220a.dtb \ > diff --git a/arch/arm/boot/dts/aspeed-bmc-ampere-mtjade.dts b/arch/arm/boot/dts/aspeed-bmc-ampere-mtjade.dts > new file mode 100644 > index 000000000000..8f5ec22e51c2 > --- /dev/null > +++ b/arch/arm/boot/dts/aspeed-bmc-ampere-mtjade.dts > @@ -0,0 +1,558 @@ > +// SPDX-License-Identifier: GPL-2.0+ > +/dts-v1/; > +#include "aspeed-g5.dtsi" > +#include <dt-bindings/gpio/aspeed-gpio.h> > + > +/ { > + model = "Ampere Mt. Jade BMC"; > + compatible = "ampere,mtjade-bmc", "aspeed,ast2500"; > + > + chosen { > + stdout-path = &uart5; > + bootargs = "console=ttyS4,115200 earlyprintk"; > + }; > + > + memory@80000000 { > + reg = <0x80000000 0x20000000>; > + }; > + > + reserved-memory { > + #address-cells = <1>; > + #size-cells = <1>; > + ranges; > + > + vga_memory: framebuffer@9f000000 { > + no-map; > + reg = <0x9f000000 0x01000000>; /* 16M */ > + }; > + > + gfx_memory: framebuffer { > + size = <0x01000000>; > + alignment = <0x01000000>; > + compatible = "shared-dma-pool"; > + reusable; > + }; > + > + video_engine_memory: jpegbuffer { > + size = <0x02000000>; /* 32M */ > + alignment = <0x01000000>; > + compatible = "shared-dma-pool"; > + reusable; > + }; > + }; > + > + leds { > + compatible = "gpio-leds"; > + > + fault { > + gpios = <&gpio ASPEED_GPIO(B, 6) GPIO_ACTIVE_HIGH>; > + }; > + > + identify { > + gpios = <&gpio ASPEED_GPIO(Q, 6) GPIO_ACTIVE_HIGH>; > + }; > + }; > + > + gpio-keys { > + compatible = "gpio-keys"; > + > + shutdown_ack { > + label = "SHUTDOWN_ACK"; > + gpios = <&gpio ASPEED_GPIO(G, 2) GPIO_ACTIVE_LOW>; > + linux,code = <ASPEED_GPIO(G, 2)>; > + }; > + > + reboot_ack { > + label = "REBOOT_ACK"; > + gpios = <&gpio ASPEED_GPIO(J, 3) GPIO_ACTIVE_LOW>; > + linux,code = <ASPEED_GPIO(J, 3)>; > + }; > + > + S0_overtemp { > + label = "S0_OVERTEMP"; > + gpios = <&gpio ASPEED_GPIO(G, 3) GPIO_ACTIVE_LOW>; > + linux,code = <ASPEED_GPIO(G, 3)>; > + }; > + > + S0_hightemp { > + label = "S0_HIGHTEMP"; > + gpios = <&gpio ASPEED_GPIO(J, 0) GPIO_ACTIVE_LOW>; > + linux,code = <ASPEED_GPIO(J, 0)>; > + }; > + > + S0_cpu_fault { > + label = "S0_CPU_FAULT"; > + gpios = <&gpio ASPEED_GPIO(J, 1) GPIO_ACTIVE_HIGH>; > + linux,code = <ASPEED_GPIO(J, 1)>; > + }; > + > + S1_overtemp { > + label = "S1_OVERTEMP"; > + gpios = <&gpio ASPEED_GPIO(Z, 6) GPIO_ACTIVE_LOW>; > + linux,code = <ASPEED_GPIO(Z, 6)>; > + }; > + > + S1_hightemp { > + label = "S1_HIGHTEMP"; > + gpios = <&gpio ASPEED_GPIO(AB, 0) GPIO_ACTIVE_LOW>; > + linux,code = <ASPEED_GPIO(AB, 0)>; > + }; > + > + S1_cpu_fault { > + label = "S1_CPU_FAULT"; > + gpios = <&gpio ASPEED_GPIO(Z, 1) GPIO_ACTIVE_HIGH>; > + linux,code = <ASPEED_GPIO(Z, 1)>; > + }; > + > + id_button { > + label = "ID_BUTTON"; > + gpios = <&gpio ASPEED_GPIO(Q, 5) GPIO_ACTIVE_LOW>; > + linux,code = <ASPEED_GPIO(Q, 5)>; > + }; > + > + }; > + > + gpioA0mux: mux-controller { > + compatible = "gpio-mux"; > + #mux-control-cells = <0>; > + mux-gpios = <&gpio ASPEED_GPIO(A, 0) GPIO_ACTIVE_LOW>; > + }; > + > + adc0mux: adc0mux { > + compatible = "io-channel-mux"; > + io-channels = <&adc 0>; > + #io-channel-cells = <1>; > + io-channel-names = "parent"; > + mux-controls = <&gpioA0mux>; > + channels = "s0", "s1"; > + }; > + > + adc1mux: adc1mux { > + compatible = "io-channel-mux"; > + io-channels = <&adc 1>; > + #io-channel-cells = <1>; > + io-channel-names = "parent"; > + mux-controls = <&gpioA0mux>; > + channels = "s0", "s1"; > + }; > + > + adc2mux: adc2mux { > + compatible = "io-channel-mux"; > + io-channels = <&adc 2>; > + #io-channel-cells = <1>; > + io-channel-names = "parent"; > + mux-controls = <&gpioA0mux>; > + channels = "s0", "s1"; > + }; > + > + adc3mux: adc3mux { > + compatible = "io-channel-mux"; > + io-channels = <&adc 3>; > + #io-channel-cells = <1>; > + io-channel-names = "parent"; > + mux-controls = <&gpioA0mux>; > + channels = "s0", "s1"; > + }; > + > + adc4mux: adc4mux { > + compatible = "io-channel-mux"; > + io-channels = <&adc 4>; > + #io-channel-cells = <1>; > + io-channel-names = "parent"; > + mux-controls = <&gpioA0mux>; > + channels = "s0", "s1"; > + }; > + > + adc5mux: adc5mux { > + compatible = "io-channel-mux"; > + io-channels = <&adc 5>; > + #io-channel-cells = <1>; > + io-channel-names = "parent"; > + mux-controls = <&gpioA0mux>; > + channels = "s0", "s1"; > + }; > + > + adc6mux: adc6mux { > + compatible = "io-channel-mux"; > + io-channels = <&adc 6>; > + #io-channel-cells = <1>; > + io-channel-names = "parent"; > + mux-controls = <&gpioA0mux>; > + channels = "s0", "s1"; > + }; > + > + adc7mux: adc7mux { > + compatible = "io-channel-mux"; > + io-channels = <&adc 7>; > + #io-channel-cells = <1>; > + io-channel-names = "parent"; > + mux-controls = <&gpioA0mux>; > + channels = "s0", "s1"; > + }; > + > + adc8mux: adc8mux { > + compatible = "io-channel-mux"; > + io-channels = <&adc 8>; > + #io-channel-cells = <1>; > + io-channel-names = "parent"; > + mux-controls = <&gpioA0mux>; > + channels = "s0", "s1"; > + }; > + > + adc9mux: adc9mux { > + compatible = "io-channel-mux"; > + io-channels = <&adc 9>; > + #io-channel-cells = <1>; > + io-channel-names = "parent"; > + mux-controls = <&gpioA0mux>; > + channels = "s0", "s1"; > + }; > + > + adc10mux: adc10mux { > + compatible = "io-channel-mux"; > + io-channels = <&adc 10>; > + #io-channel-cells = <1>; > + io-channel-names = "parent"; > + mux-controls = <&gpioA0mux>; > + channels = "s0", "s1"; > + }; > + > + adc11mux: adc11mux { > + compatible = "io-channel-mux"; > + io-channels = <&adc 11>; > + #io-channel-cells = <1>; > + io-channel-names = "parent"; > + mux-controls = <&gpioA0mux>; > + channels = "s0", "s1"; > + }; > + > + adc12mux: adc12mux { > + compatible = "io-channel-mux"; > + io-channels = <&adc 12>; > + #io-channel-cells = <1>; > + io-channel-names = "parent"; > + mux-controls = <&gpioA0mux>; > + channels = "s0", "s1"; > + }; > + > + adc13mux: adc13mux { > + compatible = "io-channel-mux"; > + io-channels = <&adc 13>; > + #io-channel-cells = <1>; > + io-channel-names = "parent"; > + mux-controls = <&gpioA0mux>; > + channels = "s0", "s1"; > + }; > + > + iio-hwmon { > + compatible = "iio-hwmon"; > + io-channels = <&adc0mux 0>, <&adc0mux 1>, > + <&adc1mux 0>, <&adc1mux 1>, > + <&adc2mux 0>, <&adc2mux 1>, > + <&adc3mux 0>, <&adc3mux 1>, > + <&adc4mux 0>, <&adc4mux 1>, > + <&adc5mux 0>, <&adc5mux 1>, > + <&adc6mux 0>, <&adc6mux 1>, > + <&adc7mux 0>, <&adc7mux 1>, > + <&adc8mux 0>, <&adc8mux 1>, > + <&adc9mux 0>, <&adc9mux 1>, > + <&adc10mux 0>, <&adc10mux 1>, > + <&adc11mux 0>, <&adc11mux 1>, > + <&adc12mux 0>, <&adc12mux 1>, > + <&adc13mux 0>, <&adc13mux 1>; > + }; > + > + iio-hwmon-adc14 { > + compatible = "iio-hwmon"; > + io-channels = <&adc 14>; > + }; > + > + iio-hwmon-battery { > + compatible = "iio-hwmon"; > + io-channels = <&adc 15>; > + }; > +}; > + > +&fmc { > + status = "okay"; > + flash@0 { > + status = "okay"; > + m25p,fast-read; > + label = "bmc"; > + /* spi-max-frequency = <50000000>; */ > +#include "openbmc-flash-layout.dtsi" > + }; > +}; > + > +&spi1 { > + status = "okay"; > + pinctrl-names = "default"; > + pinctrl-0 = <&pinctrl_spi1_default>; > + > + flash@0 { > + status = "okay"; > + m25p,fast-read; > + label = "pnor"; > + /* spi-max-frequency = <100000000>; */ > + }; > +}; > + > +&uart1 { > + status = "okay"; > + pinctrl-names = "default"; > + pinctrl-0 = <&pinctrl_txd1_default > + &pinctrl_rxd1_default > + &pinctrl_ncts1_default > + &pinctrl_nrts1_default>; > +}; > + > +&uart2 { > + status = "okay"; > + pinctrl-names = "default"; > + pinctrl-0 = <&pinctrl_txd2_default > + &pinctrl_rxd2_default>; > +}; > + > +&uart3 { > + status = "okay"; > + pinctrl-names = "default"; > + pinctrl-0 = <&pinctrl_txd3_default > + &pinctrl_rxd3_default>; > +}; > + > +&uart4 { > + status = "okay"; > + pinctrl-names = "default"; > + pinctrl-0 = <&pinctrl_txd4_default > + &pinctrl_rxd4_default>; > +}; > + > +/* The BMC's uart */ > +&uart5 { > + status = "okay"; > +}; > + > +&mac1 { > + status = "okay"; > + pinctrl-names = "default"; > + pinctrl-0 = <&pinctrl_rgmii2_default &pinctrl_mdio2_default>; > +}; > + > +&i2c0 { > + status = "okay"; > +}; > + > +&i2c1 { > + status = "okay"; > +}; > + > +&i2c2 { > + status = "okay"; > +}; > + > +&i2c3 { > + status = "okay"; > + eeprom@50 { > + compatible = "microchip,24c64", "atmel,24c64"; > + reg = <0x50>; > + pagesize = <32>; > + }; > + > + inlet_mem2: tmp175@28 { > + compatible = "ti,tmp175"; > + reg = <0x28>; > + }; > + > + inlet_cpu: tmp175@29 { > + compatible = "ti,tmp175"; > + reg = <0x29>; > + }; > + > + inlet_mem1: tmp175@2a { > + compatible = "ti,tmp175"; > + reg = <0x2a>; > + }; > + > + outlet_cpu: tmp175@2b { > + compatible = "ti,tmp175"; > + reg = <0x2b>; > + }; > + > + outlet1: tmp175@2c { > + compatible = "ti,tmp175"; > + reg = <0x2c>; > + }; > + > + outlet2: tmp175@2d { > + compatible = "ti,tmp175"; > + reg = <0x2d>; > + }; > +}; > + > +&i2c4 { > + status = "okay"; > + rtc@51 { > + compatible = "nxp,pcf85063a"; > + reg = <0x51>; > + }; > +}; > + > +&i2c5 { > + status = "okay"; > +}; > + > +&i2c6 { > + status = "okay"; > + psu@58 { > + compatible = "pmbus"; > + reg = <0x58>; > + }; > + > + psu@59 { > + compatible = "pmbus"; > + reg = <0x59>; > + }; > +}; > + > +&i2c7 { > + status = "okay"; > +}; > + > +&i2c8 { > + status = "okay"; > +}; > + > +&i2c9 { > + status = "okay"; > +}; > + > +&gfx { > + status = "okay"; > + memory-region = <&gfx_memory>; > +}; > + > +&pinctrl { > + aspeed,external-nodes = <&gfx &lhc>; > +}; > + > +&pwm_tacho { > + status = "okay"; > + pinctrl-names = "default"; > + pinctrl-0 = <&pinctrl_pwm2_default &pinctrl_pwm3_default > + &pinctrl_pwm4_default &pinctrl_pwm5_default > + &pinctrl_pwm6_default &pinctrl_pwm7_default>; > + > + fan@0 { > + reg = <0x02>; > + aspeed,fan-tach-ch = /bits/ 8 <0x04>; > + }; > + > + fan@1 { > + reg = <0x02>; > + aspeed,fan-tach-ch = /bits/ 8 <0x05>; > + }; > + > + fan@2 { > + reg = <0x03>; > + aspeed,fan-tach-ch = /bits/ 8 <0x06>; > + }; > + > + fan@3 { > + reg = <0x03>; > + aspeed,fan-tach-ch = /bits/ 8 <0x07>; > + }; > + > + fan@4 { > + reg = <0x04>; > + aspeed,fan-tach-ch = /bits/ 8 <0x08>; > + }; > + > + fan@5 { > + reg = <0x04>; > + aspeed,fan-tach-ch = /bits/ 8 <0x09>; > + }; > + > + fan@6 { > + reg = <0x05>; > + aspeed,fan-tach-ch = /bits/ 8 <0x0a>; > + }; > + > + fan@7 { > + reg = <0x05>; > + aspeed,fan-tach-ch = /bits/ 8 <0x0b>; > + }; > + > + fan@8 { > + reg = <0x06>; > + aspeed,fan-tach-ch = /bits/ 8 <0x0c>; > + }; > + > + fan@9 { > + reg = <0x06>; > + aspeed,fan-tach-ch = /bits/ 8 <0x0d>; > + }; > + > + fan@10 { > + reg = <0x07>; > + aspeed,fan-tach-ch = /bits/ 8 <0x0e>; > + }; > + > + fan@11 { > + reg = <0x07>; > + aspeed,fan-tach-ch = /bits/ 8 <0x0f>; > + }; > + > +}; > + > +&vhub { > + status = "okay"; > +}; > + > +&adc { > + status = "okay"; > +}; > + > +&video { > + status = "okay"; > + memory-region = <&video_engine_memory>; > +}; > + > +&gpio { > + gpio-line-names = > + /*A0-A7*/ "","","","S0_BMC_SPECIAL_BOOT","","","","", > + /*B0-B7*/ "BMC_SELECT_EEPROM","","","", > + "POWER_BUTTON","","","", > + /*C0-C7*/ "","","","","","","","", > + /*D0-D7*/ "","","","","","","","", > + /*E0-E7*/ "","","","","","","","", > + /*F0-F7*/ "","","BMC_SYS_PSON_L","S0_DDR_SAVE","PGOOD", > + "S1_DDR_SAVE","","", > + /*G0-G7*/ "S0_FW_BOOT_OK","SHD_REQ_L","","S0_OVERTEMP_L","","", > + "","", > + /*H0-H7*/ "","","","","","","","", > + /*I0-I7*/ "","","S1_BMC_SPECIAL_BOOT","","","","","", > + /*J0-J7*/ "S0_HIGHTEMP_L","S0_FAULT_L","S0_SCP_AUTH_FAIL_L","", > + "","","","", > + /*K0-K7*/ "","","","","","","","", > + /*L0-L7*/ "","","","BMC_SYSRESET_L","SPI_AUTH_FAIL_L","","","", > + /*M0-M7*/ "","","","","","","","", > + /*N0-N7*/ "","","","","","","","", > + /*O0-O7*/ "","","","","","","","", > + /*P0-P7*/ "","","","","","","","", > + /*Q0-Q7*/ "","","","","","UID_BUTTON","","", > + /*R0-R7*/ "","","BMC_EXT_HIGHTEMP_L","","","RESET_BUTTON","","", > + /*S0-S7*/ "","","","","","","","", > + /*T0-T7*/ "","","","","","","","", > + /*U0-U7*/ "","","","","","","","", > + /*V0-V7*/ "","","","","","","","", > + /*W0-W7*/ "","","","","","","","", > + /*X0-X7*/ "","","","","","","","", > + /*Y0-Y7*/ "","","","","","","","", > + /*Z0-Z7*/ "S0_BMC_PLIMIT","S1_FAULT_L","S1_FW_BOOT_OK","","", > + "S1_SCP_AUTH_FAIL_L","S1_OVERTEMP_L","", > + /*AA0-AA7*/ "","","","","","","","", > + /*AB0-AB7*/ "S1_HIGHTEMP_L","S1_BMC_PLIMIT","S0_BMC_DDR_ADDR", > + "S1_BMC_DDR_ADR","","","","", > + /*AC0-AC7*/ "SYS_PWR_GD","","","","","BMC_READY","SLAVE_PRESENT_L", > + "BMC_OCP_PG"; > +}; > -- > 2.28.0 > _______________________________________________ linux-arm-kernel mailing list linux-arm-kernel@lists.infradead.org http://lists.infradead.org/mailman/listinfo/linux-arm-kernel ^ permalink raw reply [flat|nested] 21+ messages in thread
* Re: [PATCH 2/2] ARM: dts: aspeed: Add device tree for Ampere's Mt. Jade BMC 2020-12-08 4:41 ` Joel Stanley @ 2020-12-08 8:08 ` Krzysztof Kozlowski -1 siblings, 0 replies; 21+ messages in thread From: Krzysztof Kozlowski @ 2020-12-08 8:08 UTC (permalink / raw) To: Joel Stanley Cc: Quan Nguyen, Rob Herring, Andrew Jeffery, Sam Ravnborg, Linus Walleij, Arnd Bergmann, Mark Brown, Kuninori Morimoto, Geert Uytterhoeven, allen, devicetree, Linux Kernel Mailing List, Linux ARM, linux-aspeed On Tue, 8 Dec 2020 at 05:42, Joel Stanley <joel@jms.id.au> wrote: > > On Tue, 8 Dec 2020 at 04:37, Quan Nguyen <quan@os.amperecomputing.com> wrote: > > > > The Mt. Jade BMC is an ASPEED AST2500-based BMC for the Mt. Jade > > hardware reference platform with Ampere's Altra Processor Family. > > > > Reviewed-by: Andrew Jeffery <andrew@aj.id.au> > > Reviewed-by: Joel Stanley <joel@jms.id.au> > > Signed-off-by: Quan Nguyen <quan@os.amperecomputing.com> > > Signed-off-by: Phong Vo <phong@os.amperecomputing.com> > > Signed-off-by: Thang Q. Nguyen <thang@os.amperecomputing.com> > > Thanks, I've applied this to the aspeed tree. Did you review it already before (which would explain tags being there)? Best regards, Krzysztof ^ permalink raw reply [flat|nested] 21+ messages in thread
* Re: [PATCH 2/2] ARM: dts: aspeed: Add device tree for Ampere's Mt. Jade BMC @ 2020-12-08 8:08 ` Krzysztof Kozlowski 0 siblings, 0 replies; 21+ messages in thread From: Krzysztof Kozlowski @ 2020-12-08 8:08 UTC (permalink / raw) To: Joel Stanley Cc: devicetree, Kuninori Morimoto, Arnd Bergmann, Andrew Jeffery, allen, Linus Walleij, Linux Kernel Mailing List, linux-aspeed, Rob Herring, Mark Brown, Quan Nguyen, Geert Uytterhoeven, Sam Ravnborg, Linux ARM On Tue, 8 Dec 2020 at 05:42, Joel Stanley <joel@jms.id.au> wrote: > > On Tue, 8 Dec 2020 at 04:37, Quan Nguyen <quan@os.amperecomputing.com> wrote: > > > > The Mt. Jade BMC is an ASPEED AST2500-based BMC for the Mt. Jade > > hardware reference platform with Ampere's Altra Processor Family. > > > > Reviewed-by: Andrew Jeffery <andrew@aj.id.au> > > Reviewed-by: Joel Stanley <joel@jms.id.au> > > Signed-off-by: Quan Nguyen <quan@os.amperecomputing.com> > > Signed-off-by: Phong Vo <phong@os.amperecomputing.com> > > Signed-off-by: Thang Q. Nguyen <thang@os.amperecomputing.com> > > Thanks, I've applied this to the aspeed tree. Did you review it already before (which would explain tags being there)? Best regards, Krzysztof _______________________________________________ linux-arm-kernel mailing list linux-arm-kernel@lists.infradead.org http://lists.infradead.org/mailman/listinfo/linux-arm-kernel ^ permalink raw reply [flat|nested] 21+ messages in thread
* Re: [PATCH 2/2] ARM: dts: aspeed: Add device tree for Ampere's Mt. Jade BMC 2020-12-08 8:08 ` Krzysztof Kozlowski @ 2020-12-09 2:19 ` Joel Stanley -1 siblings, 0 replies; 21+ messages in thread From: Joel Stanley @ 2020-12-09 2:19 UTC (permalink / raw) To: Krzysztof Kozlowski Cc: Quan Nguyen, Rob Herring, Andrew Jeffery, Sam Ravnborg, Linus Walleij, Arnd Bergmann, Mark Brown, Kuninori Morimoto, Geert Uytterhoeven, allen, devicetree, Linux Kernel Mailing List, Linux ARM, linux-aspeed On Tue, 8 Dec 2020 at 08:09, Krzysztof Kozlowski <krzk@kernel.org> wrote: > > On Tue, 8 Dec 2020 at 05:42, Joel Stanley <joel@jms.id.au> wrote: > > > > On Tue, 8 Dec 2020 at 04:37, Quan Nguyen <quan@os.amperecomputing.com> wrote: > > > > > > The Mt. Jade BMC is an ASPEED AST2500-based BMC for the Mt. Jade > > > hardware reference platform with Ampere's Altra Processor Family. > > > > > > Reviewed-by: Andrew Jeffery <andrew@aj.id.au> > > > Reviewed-by: Joel Stanley <joel@jms.id.au> > > > Signed-off-by: Quan Nguyen <quan@os.amperecomputing.com> > > > Signed-off-by: Phong Vo <phong@os.amperecomputing.com> > > > Signed-off-by: Thang Q. Nguyen <thang@os.amperecomputing.com> > > > > Thanks, I've applied this to the aspeed tree. > > Did you review it already before (which would explain tags being there)? Correct, these were sent to the openbmc list initially: https://lore.kernel.org/openbmc/CACPK8XdabEgp2Qi0Ud0BJ9oCK2BJ6L-F2Wg+OOEvzTALRLDadg@mail.gmail.com/ Cheers, Joel ^ permalink raw reply [flat|nested] 21+ messages in thread
* Re: [PATCH 2/2] ARM: dts: aspeed: Add device tree for Ampere's Mt. Jade BMC @ 2020-12-09 2:19 ` Joel Stanley 0 siblings, 0 replies; 21+ messages in thread From: Joel Stanley @ 2020-12-09 2:19 UTC (permalink / raw) To: Krzysztof Kozlowski Cc: devicetree, Kuninori Morimoto, Arnd Bergmann, Andrew Jeffery, allen, Linus Walleij, Linux Kernel Mailing List, linux-aspeed, Rob Herring, Mark Brown, Quan Nguyen, Geert Uytterhoeven, Sam Ravnborg, Linux ARM On Tue, 8 Dec 2020 at 08:09, Krzysztof Kozlowski <krzk@kernel.org> wrote: > > On Tue, 8 Dec 2020 at 05:42, Joel Stanley <joel@jms.id.au> wrote: > > > > On Tue, 8 Dec 2020 at 04:37, Quan Nguyen <quan@os.amperecomputing.com> wrote: > > > > > > The Mt. Jade BMC is an ASPEED AST2500-based BMC for the Mt. Jade > > > hardware reference platform with Ampere's Altra Processor Family. > > > > > > Reviewed-by: Andrew Jeffery <andrew@aj.id.au> > > > Reviewed-by: Joel Stanley <joel@jms.id.au> > > > Signed-off-by: Quan Nguyen <quan@os.amperecomputing.com> > > > Signed-off-by: Phong Vo <phong@os.amperecomputing.com> > > > Signed-off-by: Thang Q. Nguyen <thang@os.amperecomputing.com> > > > > Thanks, I've applied this to the aspeed tree. > > Did you review it already before (which would explain tags being there)? Correct, these were sent to the openbmc list initially: https://lore.kernel.org/openbmc/CACPK8XdabEgp2Qi0Ud0BJ9oCK2BJ6L-F2Wg+OOEvzTALRLDadg@mail.gmail.com/ Cheers, Joel _______________________________________________ linux-arm-kernel mailing list linux-arm-kernel@lists.infradead.org http://lists.infradead.org/mailman/listinfo/linux-arm-kernel ^ permalink raw reply [flat|nested] 21+ messages in thread
* [PATCH 0/2] ARM: dts: aspeed: Add Ampere Mt. Jade BMC device @ 2020-11-27 2:41 Quan Nguyen 2020-11-27 2:41 ` [PATCH 1/2] dt-bindings: vendor-prefixes: Add an entry for AmpereComputing.com Quan Nguyen 0 siblings, 1 reply; 21+ messages in thread From: Quan Nguyen @ 2020-11-27 2:41 UTC (permalink / raw) To: Joel Stanley, openbmc; +Cc: Open Source Submission, Thang Q . Nguyen, Phong Vo ARM: dts: aspeed: Add Ampere Mt. Jade BMC device tree. Quan Nguyen (2): dt-bindings: vendor-prefixes: Add an entry for AmpereComputing.com ARM: dts: aspeed: Add device tree for Ampere's Mt. Jade BMC .../devicetree/bindings/vendor-prefixes.yaml | 2 + arch/arm/boot/dts/Makefile | 1 + .../arm/boot/dts/aspeed-bmc-ampere-mtjade.dts | 568 ++++++++++++++++++ 3 files changed, 571 insertions(+) create mode 100644 arch/arm/boot/dts/aspeed-bmc-ampere-mtjade.dts -- 2.28.0 ^ permalink raw reply [flat|nested] 21+ messages in thread
* [PATCH 1/2] dt-bindings: vendor-prefixes: Add an entry for AmpereComputing.com 2020-11-27 2:41 [PATCH 0/2] ARM: dts: aspeed: Add Ampere Mt. Jade BMC device Quan Nguyen @ 2020-11-27 2:41 ` Quan Nguyen 2020-11-27 3:26 ` Joel Stanley 0 siblings, 1 reply; 21+ messages in thread From: Quan Nguyen @ 2020-11-27 2:41 UTC (permalink / raw) To: Joel Stanley, openbmc; +Cc: Open Source Submission, Thang Q . Nguyen, Phong Vo Add "ampere" entry for Ampere Computing LLC: amperecomputing.com Signed-off-by: Quan Nguyen <quan@os.amperecomputing.com> Signed-off-by: Phong Vo <phong@os.amperecomputing.com> Signed-off-by: Thang Q. Nguyen <thang@os.amperecomputing.com> --- Documentation/devicetree/bindings/vendor-prefixes.yaml | 2 ++ 1 file changed, 2 insertions(+) diff --git a/Documentation/devicetree/bindings/vendor-prefixes.yaml b/Documentation/devicetree/bindings/vendor-prefixes.yaml index 604166ecaefb..1887cd5687da 100644 --- a/Documentation/devicetree/bindings/vendor-prefixes.yaml +++ b/Documentation/devicetree/bindings/vendor-prefixes.yaml @@ -99,6 +99,8 @@ patternProperties: description: Anvo-Systems Dresden GmbH "^apm,.*": description: Applied Micro Circuits Corporation (APM) + "^ampere,.*": + description: Ampere Computing LLC "^aptina,.*": description: Aptina Imaging "^arasan,.*": -- 2.28.0 ^ permalink raw reply related [flat|nested] 21+ messages in thread
* Re: [PATCH 1/2] dt-bindings: vendor-prefixes: Add an entry for AmpereComputing.com 2020-11-27 2:41 ` [PATCH 1/2] dt-bindings: vendor-prefixes: Add an entry for AmpereComputing.com Quan Nguyen @ 2020-11-27 3:26 ` Joel Stanley 2020-11-30 1:38 ` Quan Nguyen OS 0 siblings, 1 reply; 21+ messages in thread From: Joel Stanley @ 2020-11-27 3:26 UTC (permalink / raw) To: Quan Nguyen Cc: OpenBMC Maillist, Thang Q . Nguyen, Open Source Submission, Phong Vo On Fri, 27 Nov 2020 at 02:42, Quan Nguyen <quan@os.amperecomputing.com> wrote: > > Add "ampere" entry for Ampere Computing LLC: amperecomputing.com > > Signed-off-by: Quan Nguyen <quan@os.amperecomputing.com> > Signed-off-by: Phong Vo <phong@os.amperecomputing.com> > Signed-off-by: Thang Q. Nguyen <thang@os.amperecomputing.com> > --- > Documentation/devicetree/bindings/vendor-prefixes.yaml | 2 ++ > 1 file changed, 2 insertions(+) > > diff --git a/Documentation/devicetree/bindings/vendor-prefixes.yaml b/Documentation/devicetree/bindings/vendor-prefixes.yaml > index 604166ecaefb..1887cd5687da 100644 > --- a/Documentation/devicetree/bindings/vendor-prefixes.yaml > +++ b/Documentation/devicetree/bindings/vendor-prefixes.yaml > @@ -99,6 +99,8 @@ patternProperties: > description: Anvo-Systems Dresden GmbH > "^apm,.*": > description: Applied Micro Circuits Corporation (APM) > + "^ampere,.*": > + description: Ampere Computing LLC I think this file is sorted alphabetically. You should follow that ordering. > "^aptina,.*": > description: Aptina Imaging > "^arasan,.*": > -- > 2.28.0 > ^ permalink raw reply [flat|nested] 21+ messages in thread
* Re: [PATCH 1/2] dt-bindings: vendor-prefixes: Add an entry for AmpereComputing.com 2020-11-27 3:26 ` Joel Stanley @ 2020-11-30 1:38 ` Quan Nguyen OS 0 siblings, 0 replies; 21+ messages in thread From: Quan Nguyen OS @ 2020-11-30 1:38 UTC (permalink / raw) To: Joel Stanley Cc: OpenBMC Maillist, Thang Nguyen OS, Open Source Submission, Phong Vo OS Thanks Joel, Will fix this in v2. -Quan On 11/27/20, 10:26, "Joel Stanley" <joel@jms.id.au> wrote: On Fri, 27 Nov 2020 at 02:42, Quan Nguyen <quan@os.amperecomputing.com> wrote: > > Add "ampere" entry for Ampere Computing LLC: amperecomputing.com > > Signed-off-by: Quan Nguyen <quan@os.amperecomputing.com> > Signed-off-by: Phong Vo <phong@os.amperecomputing.com> > Signed-off-by: Thang Q. Nguyen <thang@os.amperecomputing.com> > --- > Documentation/devicetree/bindings/vendor-prefixes.yaml | 2 ++ > 1 file changed, 2 insertions(+) > > diff --git a/Documentation/devicetree/bindings/vendor-prefixes.yaml b/Documentation/devicetree/bindings/vendor-prefixes.yaml > index 604166ecaefb..1887cd5687da 100644 > --- a/Documentation/devicetree/bindings/vendor-prefixes.yaml > +++ b/Documentation/devicetree/bindings/vendor-prefixes.yaml > @@ -99,6 +99,8 @@ patternProperties: > description: Anvo-Systems Dresden GmbH > "^apm,.*": > description: Applied Micro Circuits Corporation (APM) > + "^ampere,.*": > + description: Ampere Computing LLC I think this file is sorted alphabetically. You should follow that ordering. > "^aptina,.*": > description: Aptina Imaging > "^arasan,.*": > -- > 2.28.0 > ^ permalink raw reply [flat|nested] 21+ messages in thread
end of thread, other threads:[~2020-12-10 2:16 UTC | newest] Thread overview: 21+ messages (download: mbox.gz / follow: Atom feed) -- links below jump to the message on this page -- 2020-12-08 4:36 [PATCH 0/2] ARM: dts: aspeed: Add Ampere Mt. Jade BMC device Quan Nguyen 2020-12-08 4:36 ` Quan Nguyen 2020-12-08 4:36 ` [PATCH 1/2] dt-bindings: vendor-prefixes: Add an entry for AmpereComputing.com Quan Nguyen 2020-12-08 4:36 ` Quan Nguyen 2020-12-08 4:41 ` Joel Stanley 2020-12-08 4:41 ` Joel Stanley 2020-12-08 8:07 ` Krzysztof Kozlowski 2020-12-08 8:07 ` Krzysztof Kozlowski 2020-12-10 2:15 ` Rob Herring 2020-12-10 2:15 ` Rob Herring 2020-12-08 4:37 ` [PATCH 2/2] ARM: dts: aspeed: Add device tree for Ampere's Mt. Jade BMC Quan Nguyen 2020-12-08 4:37 ` Quan Nguyen 2020-12-08 4:41 ` Joel Stanley 2020-12-08 4:41 ` Joel Stanley 2020-12-08 8:08 ` Krzysztof Kozlowski 2020-12-08 8:08 ` Krzysztof Kozlowski 2020-12-09 2:19 ` Joel Stanley 2020-12-09 2:19 ` Joel Stanley -- strict thread matches above, loose matches on Subject: below -- 2020-11-27 2:41 [PATCH 0/2] ARM: dts: aspeed: Add Ampere Mt. Jade BMC device Quan Nguyen 2020-11-27 2:41 ` [PATCH 1/2] dt-bindings: vendor-prefixes: Add an entry for AmpereComputing.com Quan Nguyen 2020-11-27 3:26 ` Joel Stanley 2020-11-30 1:38 ` Quan Nguyen OS
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.