* [v2 01/33] gpio: mpc8xxx_gpio: fix a bug on ls1046ardb
2020-12-08 8:58 [v2 00/33] gpio: layerscape: fix gpio bug and enable gpio Biwen Li
@ 2020-12-08 8:58 ` Biwen Li
2021-01-19 6:29 ` Priyanka Jain
2020-12-08 8:58 ` [v2 02/33] arm: dts: ls1021a: add gpio node Biwen Li
` (31 subsequent siblings)
32 siblings, 1 reply; 35+ messages in thread
From: Biwen Li @ 2020-12-08 8:58 UTC (permalink / raw)
To: u-boot
From: Biwen Li <biwen.li@nxp.com>
Fix a bug as belows,
=> gpio status -a
"Synchronous Abort" handler, esr 0x96000061
elr: 0000000082047964 lr : 0000000082047960 (reloc)
elr: 00000000fbd72964 lr : 00000000fbd72960
x0 : 00000000ffffffff x1 : 000000000000000a
x2 : 0000000000000020 x3 : 0000000000000001
x4 : 0000000000000000 x5 : 0000000000000030
x6 : 0000000000000020 x7 : 0000000000000002
x8 : 00000000ffffffe0 x9 : 0000000000000008
x10: 0000000000000010 x11: 0000000000000006
x12: 000000000001869f x13: 0000000000000230
x14: 00000000fbc23e9c x15: 00000000ffffffff
Signed-off-by: Biwen Li <biwen.li@nxp.com>
---
.../asm/arch-fsl-layerscape/immap_lsch3.h | 10 +++++
drivers/gpio/mpc8xxx_gpio.c | 45 +++----------------
2 files changed, 17 insertions(+), 38 deletions(-)
diff --git a/arch/arm/include/asm/arch-fsl-layerscape/immap_lsch3.h b/arch/arm/include/asm/arch-fsl-layerscape/immap_lsch3.h
index 24a64b7575..85c894a598 100644
--- a/arch/arm/include/asm/arch-fsl-layerscape/immap_lsch3.h
+++ b/arch/arm/include/asm/arch-fsl-layerscape/immap_lsch3.h
@@ -589,5 +589,15 @@ struct ccsr_serdes {
u8 res5[0x19fc - 0xa00];
};
+struct ccsr_gpio {
+ u32 gpdir;
+ u32 gpodr;
+ u32 gpdat;
+ u32 gpier;
+ u32 gpimr;
+ u32 gpicr;
+ u32 gpibe;
+};
+
#endif /*__ASSEMBLY__ */
#endif /* __ARCH_FSL_LSCH3_IMMAP_H_ */
diff --git a/drivers/gpio/mpc8xxx_gpio.c b/drivers/gpio/mpc8xxx_gpio.c
index 27881a7322..d598d3e19c 100644
--- a/drivers/gpio/mpc8xxx_gpio.c
+++ b/drivers/gpio/mpc8xxx_gpio.c
@@ -16,16 +16,6 @@
#include <asm/io.h>
#include <dm/of_access.h>
-struct ccsr_gpio {
- u32 gpdir;
- u32 gpodr;
- u32 gpdat;
- u32 gpier;
- u32 gpimr;
- u32 gpicr;
- u32 gpibe;
-};
-
struct mpc8xxx_gpio_data {
/* The bank's register base in memory */
struct ccsr_gpio __iomem *base;
@@ -187,32 +177,11 @@ static int mpc8xxx_gpio_ofdata_to_platdata(struct udevice *dev)
{
struct mpc8xxx_gpio_plat *plat = dev_get_platdata(dev);
struct mpc8xxx_gpio_data *data = dev_get_priv(dev);
- fdt_addr_t addr;
- u32 i;
- u32 reg[4];
- if (ofnode_read_bool(dev->node, "little-endian"))
+ if (dev_read_bool(dev, "little-endian"))
data->little_endian = true;
- if (data->little_endian)
- dev_read_u32_array(dev, "reg", reg, 4);
- else
- dev_read_u32_array(dev, "reg", reg, 2);
-
- if (data->little_endian) {
- for (i = 0; i < 2; i++)
- reg[i] = be32_to_cpu(reg[i]);
- }
-
- addr = dev_translate_address(dev, reg);
-
- plat->addr = addr;
-
- if (data->little_endian)
- plat->size = reg[3];
- else
- plat->size = reg[1];
-
+ plat->addr = (ulong)dev_read_addr_size_index(dev, 0, (fdt_size_t *)&plat->size);
plat->ngpios = dev_read_u32_default(dev, "ngpios", 32);
return 0;
@@ -257,11 +226,11 @@ static int mpc8xxx_gpio_probe(struct udevice *dev)
if (!str)
return -ENOMEM;
- if (ofnode_device_is_compatible(dev->node, "fsl,qoriq-gpio")) {
- unsigned long gpibe = data->addr + sizeof(struct ccsr_gpio)
- - sizeof(u32);
-
- out_be32((unsigned int *)gpibe, 0xffffffff);
+ if (device_is_compatible(dev, "fsl,qoriq-gpio")) {
+ if (data->little_endian)
+ out_le32(&data->base->gpibe, 0xffffffff);
+ else
+ out_be32(&data->base->gpibe, 0xffffffff);
}
uc_priv->bank_name = str;
--
2.17.1
^ permalink raw reply related [flat|nested] 35+ messages in thread
* [v2 01/33] gpio: mpc8xxx_gpio: fix a bug on ls1046ardb
2020-12-08 8:58 ` [v2 01/33] gpio: mpc8xxx_gpio: fix a bug on ls1046ardb Biwen Li
@ 2021-01-19 6:29 ` Priyanka Jain
0 siblings, 0 replies; 35+ messages in thread
From: Priyanka Jain @ 2021-01-19 6:29 UTC (permalink / raw)
To: u-boot
>-----Original Message-----
>From: U-Boot <u-boot-bounces@lists.denx.de> On Behalf Of Biwen Li
>Sent: Tuesday, December 8, 2020 2:29 PM
>To: Priyanka Jain <priyanka.jain@nxp.com>
>Cc: Jiafei Pan <jiafei.pan@nxp.com>; u-boot at lists.denx.de; Xiaobo Xie
><xiaobo.xie@nxp.com>; Biwen Li <biwen.li@nxp.com>
>Subject: [v2 01/33] gpio: mpc8xxx_gpio: fix a bug on ls1046ardb
>
>From: Biwen Li <biwen.li@nxp.com>
>
Please provide summary of changes this patch is doing in patch description.
Also ensure to update copyright (year) for all the files if required.
>Fix a bug as belows,
>=> gpio status -a
>"Synchronous Abort" handler, esr 0x96000061
>elr: 0000000082047964 lr : 0000000082047960 (reloc)
>elr: 00000000fbd72964 lr : 00000000fbd72960
>x0 : 00000000ffffffff x1 : 000000000000000a
>x2 : 0000000000000020 x3 : 0000000000000001
>x4 : 0000000000000000 x5 : 0000000000000030
>x6 : 0000000000000020 x7 : 0000000000000002
>x8 : 00000000ffffffe0 x9 : 0000000000000008
>x10: 0000000000000010 x11: 0000000000000006
>x12: 000000000001869f x13: 0000000000000230
>x14: 00000000fbc23e9c x15: 00000000ffffffff
>
>Signed-off-by: Biwen Li <biwen.li@nxp.com>
>---
<snip>
Regards
Priyanka
^ permalink raw reply [flat|nested] 35+ messages in thread
* [v2 02/33] arm: dts: ls1021a: add gpio node
2020-12-08 8:58 [v2 00/33] gpio: layerscape: fix gpio bug and enable gpio Biwen Li
2020-12-08 8:58 ` [v2 01/33] gpio: mpc8xxx_gpio: fix a bug on ls1046ardb Biwen Li
@ 2020-12-08 8:58 ` Biwen Li
2020-12-08 8:58 ` [v2 03/33] arm64: dts: ls1012a: " Biwen Li
` (30 subsequent siblings)
32 siblings, 0 replies; 35+ messages in thread
From: Biwen Li @ 2020-12-08 8:58 UTC (permalink / raw)
To: u-boot
From: Biwen Li <biwen.li@nxp.com>
Add gpio node for SoC LS1021A
Signed-off-by: Biwen Li <biwen.li@nxp.com>
---
arch/arm/dts/ls1021a.dtsi | 40 +++++++++++++++++++++++++++++++++++++++
1 file changed, 40 insertions(+)
diff --git a/arch/arm/dts/ls1021a.dtsi b/arch/arm/dts/ls1021a.dtsi
index 0eeec43ccc..7b99ce02b3 100644
--- a/arch/arm/dts/ls1021a.dtsi
+++ b/arch/arm/dts/ls1021a.dtsi
@@ -98,6 +98,46 @@
bus-width = <4>;
};
+ gpio0: gpio at 2300000 {
+ compatible = "fsl,ls1021a-gpio", "fsl,qoriq-gpio";
+ reg = <0x0 0x2300000 0x0 0x10000>;
+ interrupts = <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+
+ gpio1: gpio at 2310000 {
+ compatible = "fsl,ls1021a-gpio", "fsl,qoriq-gpio";
+ reg = <0x0 0x2310000 0x0 0x10000>;
+ interrupts = <GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+
+ gpio2: gpio at 2320000 {
+ compatible = "fsl,ls1021a-gpio", "fsl,qoriq-gpio";
+ reg = <0x0 0x2320000 0x0 0x10000>;
+ interrupts = <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+
+ gpio3: gpio at 2330000 {
+ compatible = "fsl,ls1021a-gpio", "fsl,qoriq-gpio";
+ reg = <0x0 0x2330000 0x0 0x10000>;
+ interrupts = <GIC_SPI 166 IRQ_TYPE_LEVEL_HIGH>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+
scfg: scfg at 1570000 {
compatible = "fsl,ls1021a-scfg", "syscon";
reg = <0x1570000 0x10000>;
--
2.17.1
^ permalink raw reply related [flat|nested] 35+ messages in thread
* [v2 03/33] arm64: dts: ls1012a: add gpio node
2020-12-08 8:58 [v2 00/33] gpio: layerscape: fix gpio bug and enable gpio Biwen Li
2020-12-08 8:58 ` [v2 01/33] gpio: mpc8xxx_gpio: fix a bug on ls1046ardb Biwen Li
2020-12-08 8:58 ` [v2 02/33] arm: dts: ls1021a: add gpio node Biwen Li
@ 2020-12-08 8:58 ` Biwen Li
2020-12-08 8:58 ` [v2 04/33] arm64: dts: ls1028a: " Biwen Li
` (29 subsequent siblings)
32 siblings, 0 replies; 35+ messages in thread
From: Biwen Li @ 2020-12-08 8:58 UTC (permalink / raw)
To: u-boot
From: Biwen Li <biwen.li@nxp.com>
Add gpio node for SoC LS1012A
Signed-off-by: Biwen Li <biwen.li@nxp.com>
---
arch/arm/dts/fsl-ls1012a.dtsi | 20 ++++++++++++++++++++
1 file changed, 20 insertions(+)
diff --git a/arch/arm/dts/fsl-ls1012a.dtsi b/arch/arm/dts/fsl-ls1012a.dtsi
index 2d70c82a72..b1a616ed84 100644
--- a/arch/arm/dts/fsl-ls1012a.dtsi
+++ b/arch/arm/dts/fsl-ls1012a.dtsi
@@ -70,6 +70,26 @@
bus-width = <4>;
};
+ gpio0: gpio at 2300000 {
+ compatible = "fsl,qoriq-gpio";
+ reg = <0x0 0x2300000 0x0 0x10000>;
+ interrupts = <0 66 0x4>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+
+ gpio1: gpio at 2310000 {
+ compatible = "fsl,qoriq-gpio";
+ reg = <0x0 0x2310000 0x0 0x10000>;
+ interrupts = <0 67 0x4>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+
i2c0: i2c at 2180000 {
compatible = "fsl,vf610-i2c";
#address-cells = <1>;
--
2.17.1
^ permalink raw reply related [flat|nested] 35+ messages in thread
* [v2 04/33] arm64: dts: ls1028a: add gpio node
2020-12-08 8:58 [v2 00/33] gpio: layerscape: fix gpio bug and enable gpio Biwen Li
` (2 preceding siblings ...)
2020-12-08 8:58 ` [v2 03/33] arm64: dts: ls1012a: " Biwen Li
@ 2020-12-08 8:58 ` Biwen Li
2020-12-08 8:58 ` [v2 05/33] arm64: dts: ls1043a: " Biwen Li
` (28 subsequent siblings)
32 siblings, 0 replies; 35+ messages in thread
From: Biwen Li @ 2020-12-08 8:58 UTC (permalink / raw)
To: u-boot
From: Biwen Li <biwen.li@nxp.com>
Add gpio node for SoC LS1028A
Signed-off-by: Biwen Li <biwen.li@nxp.com>
---
arch/arm/dts/fsl-ls1028a.dtsi | 33 +++++++++++++++++++++++++++++++++
1 file changed, 33 insertions(+)
diff --git a/arch/arm/dts/fsl-ls1028a.dtsi b/arch/arm/dts/fsl-ls1028a.dtsi
index bf6373d5ec..64e75c637d 100644
--- a/arch/arm/dts/fsl-ls1028a.dtsi
+++ b/arch/arm/dts/fsl-ls1028a.dtsi
@@ -380,6 +380,39 @@
status = "disabled";
};
+ gpio0: gpio at 2300000 {
+ compatible = "fsl,ls1028a-gpio","fsl,qoriq-gpio";
+ reg = <0x0 0x2300000 0x0 0x10000>;
+ interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ little-endian;
+ };
+
+ gpio1: gpio at 2310000 {
+ compatible = "fsl,ls1028a-gpio","fsl,qoriq-gpio";
+ reg = <0x0 0x2310000 0x0 0x10000>;
+ interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ little-endian;
+ };
+
+ gpio2: gpio at 2320000 {
+ compatible = "fsl,ls1028a-gpio","fsl,qoriq-gpio";
+ reg = <0x0 0x2320000 0x0 0x10000>;
+ interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ little-endian;
+ };
+
sata: sata at 3200000 {
compatible = "fsl,ls1028a-ahci";
reg = <0x0 0x3200000 0x0 0x10000 /* ccsr sata base */
--
2.17.1
^ permalink raw reply related [flat|nested] 35+ messages in thread
* [v2 05/33] arm64: dts: ls1043a: add gpio node
2020-12-08 8:58 [v2 00/33] gpio: layerscape: fix gpio bug and enable gpio Biwen Li
` (3 preceding siblings ...)
2020-12-08 8:58 ` [v2 04/33] arm64: dts: ls1028a: " Biwen Li
@ 2020-12-08 8:58 ` Biwen Li
2020-12-08 8:58 ` [v2 06/33] arm64: dts: ls1046a: " Biwen Li
` (27 subsequent siblings)
32 siblings, 0 replies; 35+ messages in thread
From: Biwen Li @ 2020-12-08 8:58 UTC (permalink / raw)
To: u-boot
From: Biwen Li <biwen.li@nxp.com>
Add gpio node for SoC LS1043A
Signed-off-by: Biwen Li <biwen.li@nxp.com>
---
arch/arm/dts/fsl-ls1043a.dtsi | 40 +++++++++++++++++++++++++++++++++++
1 file changed, 40 insertions(+)
diff --git a/arch/arm/dts/fsl-ls1043a.dtsi b/arch/arm/dts/fsl-ls1043a.dtsi
index f7db44c0fa..96286104f2 100644
--- a/arch/arm/dts/fsl-ls1043a.dtsi
+++ b/arch/arm/dts/fsl-ls1043a.dtsi
@@ -78,6 +78,46 @@
bus-width = <4>;
};
+ gpio0: gpio at 2300000 {
+ compatible = "fsl,ls1043a-gpio", "fsl,qoriq-gpio";
+ reg = <0x0 0x2300000 0x0 0x10000>;
+ interrupts = <0 66 0x4>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+
+ gpio1: gpio at 2310000 {
+ compatible = "fsl,ls1043a-gpio", "fsl,qoriq-gpio";
+ reg = <0x0 0x2310000 0x0 0x10000>;
+ interrupts = <0 67 0x4>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+
+ gpio2: gpio at 2320000 {
+ compatible = "fsl,ls1043a-gpio", "fsl,qoriq-gpio";
+ reg = <0x0 0x2320000 0x0 0x10000>;
+ interrupts = <0 68 0x4>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+
+ gpio3: gpio at 2330000 {
+ compatible = "fsl,ls1043a-gpio", "fsl,qoriq-gpio";
+ reg = <0x0 0x2330000 0x0 0x10000>;
+ interrupts = <0 134 0x4>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+
ifc: ifc at 1530000 {
compatible = "fsl,ifc", "simple-bus";
reg = <0x0 0x1530000 0x0 0x10000>;
--
2.17.1
^ permalink raw reply related [flat|nested] 35+ messages in thread
* [v2 06/33] arm64: dts: ls1046a: add gpio node
2020-12-08 8:58 [v2 00/33] gpio: layerscape: fix gpio bug and enable gpio Biwen Li
` (4 preceding siblings ...)
2020-12-08 8:58 ` [v2 05/33] arm64: dts: ls1043a: " Biwen Li
@ 2020-12-08 8:58 ` Biwen Li
2020-12-08 8:58 ` [v2 07/33] arm64: dts: ls1088a: " Biwen Li
` (26 subsequent siblings)
32 siblings, 0 replies; 35+ messages in thread
From: Biwen Li @ 2020-12-08 8:58 UTC (permalink / raw)
To: u-boot
From: Biwen Li <biwen.li@nxp.com>
Add gpio node for SoC LS1046A
Signed-off-by: Biwen Li <biwen.li@nxp.com>
---
arch/arm/dts/fsl-ls1046a.dtsi | 40 +++++++++++++++++++++++++++++++++++
1 file changed, 40 insertions(+)
diff --git a/arch/arm/dts/fsl-ls1046a.dtsi b/arch/arm/dts/fsl-ls1046a.dtsi
index 3f11d6cd18..bffa6d1469 100644
--- a/arch/arm/dts/fsl-ls1046a.dtsi
+++ b/arch/arm/dts/fsl-ls1046a.dtsi
@@ -78,6 +78,46 @@
bus-width = <4>;
};
+ gpio0: gpio at 2300000 {
+ compatible = "fsl,qoriq-gpio";
+ reg = <0x0 0x2300000 0x0 0x10000>;
+ interrupts = <0 66 4>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+
+ gpio1: gpio at 2310000 {
+ compatible = "fsl,qoriq-gpio";
+ reg = <0x0 0x2310000 0x0 0x10000>;
+ interrupts = <0 67 4>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+
+ gpio2: gpio at 2320000 {
+ compatible = "fsl,qoriq-gpio";
+ reg = <0x0 0x2320000 0x0 0x10000>;
+ interrupts = <0 68 4>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+
+ gpio3: gpio at 2330000 {
+ compatible = "fsl,qoriq-gpio";
+ reg = <0x0 0x2330000 0x0 0x10000>;
+ interrupts = <0 134 4>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+
ifc: ifc at 1530000 {
compatible = "fsl,ifc", "simple-bus";
reg = <0x0 0x1530000 0x0 0x10000>;
--
2.17.1
^ permalink raw reply related [flat|nested] 35+ messages in thread
* [v2 07/33] arm64: dts: ls1088a: add gpio node
2020-12-08 8:58 [v2 00/33] gpio: layerscape: fix gpio bug and enable gpio Biwen Li
` (5 preceding siblings ...)
2020-12-08 8:58 ` [v2 06/33] arm64: dts: ls1046a: " Biwen Li
@ 2020-12-08 8:58 ` Biwen Li
2020-12-08 8:58 ` [v2 08/33] arm64: dts: ls208xa: " Biwen Li
` (25 subsequent siblings)
32 siblings, 0 replies; 35+ messages in thread
From: Biwen Li @ 2020-12-08 8:58 UTC (permalink / raw)
To: u-boot
From: Biwen Li <biwen.li@nxp.com>
Add gpio node for SoC LS1088A
Signed-off-by: Biwen Li <biwen.li@nxp.com>
---
arch/arm/dts/fsl-ls1088a.dtsi | 46 +++++++++++++++++++++++++++++++++++
1 file changed, 46 insertions(+)
diff --git a/arch/arm/dts/fsl-ls1088a.dtsi b/arch/arm/dts/fsl-ls1088a.dtsi
index 6653794d1c..3e5b310437 100644
--- a/arch/arm/dts/fsl-ls1088a.dtsi
+++ b/arch/arm/dts/fsl-ls1088a.dtsi
@@ -3,7 +3,9 @@
* NXP ls1088a SOC common device tree source
*
* Copyright 2017 NXP
+ * Copyright 2020 NXP
*/
+#include <dt-bindings/interrupt-controller/arm-gic.h>
/ {
compatible = "fsl,ls1088a";
@@ -115,6 +117,50 @@
bus-width = <4>;
};
+ gpio0: gpio at 2300000 {
+ compatible = "fsl,ls1088a-gpio", "fsl,qoriq-gpio";
+ reg = <0x0 0x2300000 0x0 0x10000>;
+ interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>;
+ little-endian;
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+
+ gpio1: gpio at 2310000 {
+ compatible = "fsl,ls1088a-gpio", "fsl,qoriq-gpio";
+ reg = <0x0 0x2310000 0x0 0x10000>;
+ interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>;
+ little-endian;
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+
+ gpio2: gpio at 2320000 {
+ compatible = "fsl,ls1088a-gpio", "fsl,qoriq-gpio";
+ reg = <0x0 0x2320000 0x0 0x10000>;
+ interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>;
+ little-endian;
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+
+ gpio3: gpio at 2330000 {
+ compatible = "fsl,ls1088a-gpio", "fsl,qoriq-gpio";
+ reg = <0x0 0x2330000 0x0 0x10000>;
+ interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>;
+ little-endian;
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+
ifc: ifc at 1530000 {
compatible = "fsl,ifc", "simple-bus";
reg = <0x0 0x2240000 0x0 0x20000>;
--
2.17.1
^ permalink raw reply related [flat|nested] 35+ messages in thread
* [v2 08/33] arm64: dts: ls208xa: add gpio node
2020-12-08 8:58 [v2 00/33] gpio: layerscape: fix gpio bug and enable gpio Biwen Li
` (6 preceding siblings ...)
2020-12-08 8:58 ` [v2 07/33] arm64: dts: ls1088a: " Biwen Li
@ 2020-12-08 8:58 ` Biwen Li
2020-12-08 8:58 ` [v2 09/33] configs: ls1012a: enable CONFIG_MPC8XXX_GPIO Biwen Li
` (24 subsequent siblings)
32 siblings, 0 replies; 35+ messages in thread
From: Biwen Li @ 2020-12-08 8:58 UTC (permalink / raw)
To: u-boot
From: Biwen Li <biwen.li@nxp.com>
Add gpio node for SoC LS208xA
Signed-off-by: Biwen Li <biwen.li@nxp.com>
---
arch/arm/dts/fsl-ls2080a.dtsi | 45 +++++++++++++++++++++++++++++++++++
1 file changed, 45 insertions(+)
diff --git a/arch/arm/dts/fsl-ls2080a.dtsi b/arch/arm/dts/fsl-ls2080a.dtsi
index 6b7bf8eb16..155caf4721 100644
--- a/arch/arm/dts/fsl-ls2080a.dtsi
+++ b/arch/arm/dts/fsl-ls2080a.dtsi
@@ -3,6 +3,7 @@
* Freescale ls2080a SOC common device tree source
*
* Copyright 2013-2015 Freescale Semiconductor, Inc.
+ * Copyright 2020 NXP
*/
/ {
@@ -119,6 +120,50 @@
bus-width = <4>;
};
+ gpio0: gpio at 2300000 {
+ compatible = "fsl,ls2080a-gpio", "fsl,qoriq-gpio";
+ reg = <0x0 0x2300000 0x0 0x10000>;
+ interrupts = <0 36 0x4>; /* Level high type */
+ gpio-controller;
+ little-endian;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+
+ gpio1: gpio at 2310000 {
+ compatible = "fsl,ls2080a-gpio", "fsl,qoriq-gpio";
+ reg = <0x0 0x2310000 0x0 0x10000>;
+ interrupts = <0 36 0x4>; /* Level high type */
+ gpio-controller;
+ little-endian;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+
+ gpio2: gpio at 2320000 {
+ compatible = "fsl,ls2080a-gpio", "fsl,qoriq-gpio";
+ reg = <0x0 0x2320000 0x0 0x10000>;
+ interrupts = <0 37 0x4>; /* Level high type */
+ gpio-controller;
+ little-endian;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+
+ gpio3: gpio at 2330000 {
+ compatible = "fsl,ls2080a-gpio", "fsl,qoriq-gpio";
+ reg = <0x0 0x2330000 0x0 0x10000>;
+ interrupts = <0 37 0x4>; /* Level high type */
+ gpio-controller;
+ little-endian;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+
usb0: usb3 at 3100000 {
compatible = "fsl,layerscape-dwc3";
reg = <0x0 0x3100000 0x0 0x10000>;
--
2.17.1
^ permalink raw reply related [flat|nested] 35+ messages in thread
* [v2 09/33] configs: ls1012a: enable CONFIG_MPC8XXX_GPIO
2020-12-08 8:58 [v2 00/33] gpio: layerscape: fix gpio bug and enable gpio Biwen Li
` (7 preceding siblings ...)
2020-12-08 8:58 ` [v2 08/33] arm64: dts: ls208xa: " Biwen Li
@ 2020-12-08 8:58 ` Biwen Li
2020-12-08 8:58 ` [v2 10/33] configs: ls1043a: " Biwen Li
` (23 subsequent siblings)
32 siblings, 0 replies; 35+ messages in thread
From: Biwen Li @ 2020-12-08 8:58 UTC (permalink / raw)
To: u-boot
From: Biwen Li <biwen.li@nxp.com>
Enable CONFIG_MPC8XXX_GPIO for SoC LS1012A
Signed-off-by: Biwen Li <biwen.li@nxp.com>
---
include/configs/ls1012a_common.h | 7 +++++++
1 file changed, 7 insertions(+)
diff --git a/include/configs/ls1012a_common.h b/include/configs/ls1012a_common.h
index 6cf6a31d76..f6b5d47c25 100644
--- a/include/configs/ls1012a_common.h
+++ b/include/configs/ls1012a_common.h
@@ -62,6 +62,13 @@
#define CONFIG_I2C_DEFAULT_BUS_NUMBER 0
#endif
+/* GPIO */
+#ifdef CONFIG_DM_GPIO
+#ifndef CONFIG_MPC8XXX_GPIO
+#define CONFIG_MPC8XXX_GPIO
+#endif
+#endif
+
#define CONFIG_SYS_NS16550_SERIAL
#define CONFIG_SYS_NS16550_REG_SIZE 1
#define CONFIG_SYS_NS16550_CLK (get_serial_clock())
--
2.17.1
^ permalink raw reply related [flat|nested] 35+ messages in thread
* [v2 10/33] configs: ls1043a: enable CONFIG_MPC8XXX_GPIO
2020-12-08 8:58 [v2 00/33] gpio: layerscape: fix gpio bug and enable gpio Biwen Li
` (8 preceding siblings ...)
2020-12-08 8:58 ` [v2 09/33] configs: ls1012a: enable CONFIG_MPC8XXX_GPIO Biwen Li
@ 2020-12-08 8:58 ` Biwen Li
2020-12-08 8:58 ` [v2 11/33] configs: ls1028a: " Biwen Li
` (22 subsequent siblings)
32 siblings, 0 replies; 35+ messages in thread
From: Biwen Li @ 2020-12-08 8:58 UTC (permalink / raw)
To: u-boot
From: Biwen Li <biwen.li@nxp.com>
Enable CONFIG_MPC8XXX_GPIO for SoC LS1043A
Signed-off-by: Biwen Li <biwen.li@nxp.com>
---
include/configs/ls1043a_common.h | 7 +++++++
1 file changed, 7 insertions(+)
diff --git a/include/configs/ls1043a_common.h b/include/configs/ls1043a_common.h
index 96fdd6417e..74625cc0bb 100644
--- a/include/configs/ls1043a_common.h
+++ b/include/configs/ls1043a_common.h
@@ -119,6 +119,13 @@
#endif
+/* GPIO */
+#ifdef CONFIG_DM_GPIO
+#ifndef CONFIG_MPC8XXX_GPIO
+#define CONFIG_MPC8XXX_GPIO
+#endif
+#endif
+
/* IFC */
#ifndef SPL_NO_IFC
#if defined(CONFIG_TFABOOT) || \
--
2.17.1
^ permalink raw reply related [flat|nested] 35+ messages in thread
* [v2 11/33] configs: ls1028a: enable CONFIG_MPC8XXX_GPIO
2020-12-08 8:58 [v2 00/33] gpio: layerscape: fix gpio bug and enable gpio Biwen Li
` (9 preceding siblings ...)
2020-12-08 8:58 ` [v2 10/33] configs: ls1043a: " Biwen Li
@ 2020-12-08 8:58 ` Biwen Li
2020-12-08 8:58 ` [v2 12/33] configs: ls1088a: " Biwen Li
` (21 subsequent siblings)
32 siblings, 0 replies; 35+ messages in thread
From: Biwen Li @ 2020-12-08 8:58 UTC (permalink / raw)
To: u-boot
From: Biwen Li <biwen.li@nxp.com>
Enable CONFIG_MPC8XXX_GPIO for SoC LS1028A
Signed-off-by: Biwen Li <biwen.li@nxp.com>
---
include/configs/ls1028a_common.h | 7 +++++++
1 file changed, 7 insertions(+)
diff --git a/include/configs/ls1028a_common.h b/include/configs/ls1028a_common.h
index 8345cd7acf..1c4af7d176 100644
--- a/include/configs/ls1028a_common.h
+++ b/include/configs/ls1028a_common.h
@@ -36,6 +36,13 @@
/* Size of malloc() pool */
#define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + 2048 * 1024)
+/* GPIO */
+#ifdef CONFIG_DM_GPIO
+#ifndef CONFIG_MPC8XXX_GPIO
+#define CONFIG_MPC8XXX_GPIO
+#endif
+#endif
+
/* I2C */
#ifndef CONFIG_DM_I2C
#define CONFIG_SYS_I2C
--
2.17.1
^ permalink raw reply related [flat|nested] 35+ messages in thread
* [v2 12/33] configs: ls1088a: enable CONFIG_MPC8XXX_GPIO
2020-12-08 8:58 [v2 00/33] gpio: layerscape: fix gpio bug and enable gpio Biwen Li
` (10 preceding siblings ...)
2020-12-08 8:58 ` [v2 11/33] configs: ls1028a: " Biwen Li
@ 2020-12-08 8:58 ` Biwen Li
2020-12-08 8:58 ` [v2 13/33] configs: ls208xa: " Biwen Li
` (20 subsequent siblings)
32 siblings, 0 replies; 35+ messages in thread
From: Biwen Li @ 2020-12-08 8:58 UTC (permalink / raw)
To: u-boot
From: Biwen Li <biwen.li@nxp.com>
Enable CONFIG_MPC8XXX_GPIO for LS1088A
Signed-off-by: Biwen Li <biwen.li@nxp.com>
---
include/configs/ls1088a_common.h | 7 +++++++
1 file changed, 7 insertions(+)
diff --git a/include/configs/ls1088a_common.h b/include/configs/ls1088a_common.h
index f9e349871c..b9a956b90b 100644
--- a/include/configs/ls1088a_common.h
+++ b/include/configs/ls1088a_common.h
@@ -53,6 +53,13 @@
/* Size of malloc() pool */
#define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + 2048 * 1024)
+/* GPIO */
+#ifdef CONFIG_DM_GPIO
+#ifndef CONFIG_MPC8XXX_GPIO
+#define CONFIG_MPC8XXX_GPIO
+#endif
+#endif
+
/* I2C */
#ifndef CONFIG_DM_I2C
#define CONFIG_SYS_I2C
--
2.17.1
^ permalink raw reply related [flat|nested] 35+ messages in thread
* [v2 13/33] configs: ls208xa: enable CONFIG_MPC8XXX_GPIO
2020-12-08 8:58 [v2 00/33] gpio: layerscape: fix gpio bug and enable gpio Biwen Li
` (11 preceding siblings ...)
2020-12-08 8:58 ` [v2 12/33] configs: ls1088a: " Biwen Li
@ 2020-12-08 8:58 ` Biwen Li
2020-12-08 8:58 ` [v2 14/33] configs: lx2160a: " Biwen Li
` (19 subsequent siblings)
32 siblings, 0 replies; 35+ messages in thread
From: Biwen Li @ 2020-12-08 8:58 UTC (permalink / raw)
To: u-boot
From: Biwen Li <biwen.li@nxp.com>
Enable CONFIG_MPC8XXX_GPIO for LS208xA
Signed-off-by: Biwen Li <biwen.li@nxp.com>
---
include/configs/ls2080a_common.h | 7 +++++++
1 file changed, 7 insertions(+)
diff --git a/include/configs/ls2080a_common.h b/include/configs/ls2080a_common.h
index 444bb8c3b5..1042555a8c 100644
--- a/include/configs/ls2080a_common.h
+++ b/include/configs/ls2080a_common.h
@@ -66,6 +66,13 @@
/* Size of malloc() pool */
#define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + 2048 * 1024)
+/* GPIO */
+#ifdef CONFIG_DM_GPIO
+#ifndef CONFIG_MPC8XXX_GPIO
+#define CONFIG_MPC8XXX_GPIO
+#endif
+#endif
+
/* I2C */
#ifndef CONFIG_DM_I2C
#define CONFIG_SYS_I2C
--
2.17.1
^ permalink raw reply related [flat|nested] 35+ messages in thread
* [v2 14/33] configs: lx2160a: enable CONFIG_MPC8XXX_GPIO
2020-12-08 8:58 [v2 00/33] gpio: layerscape: fix gpio bug and enable gpio Biwen Li
` (12 preceding siblings ...)
2020-12-08 8:58 ` [v2 13/33] configs: ls208xa: " Biwen Li
@ 2020-12-08 8:58 ` Biwen Li
2020-12-08 8:58 ` [v2 15/33] configs: ls1046a: enable MPC8XXX_GPIO Biwen Li
` (18 subsequent siblings)
32 siblings, 0 replies; 35+ messages in thread
From: Biwen Li @ 2020-12-08 8:58 UTC (permalink / raw)
To: u-boot
From: Biwen Li <biwen.li@nxp.com>
Enable CONFIG_MPC8XXX_GPIO for SoC LX2160A
Signed-off-by: Biwen Li <biwen.li@nxp.com>
---
include/configs/lx2160a_common.h | 7 +++++++
1 file changed, 7 insertions(+)
diff --git a/include/configs/lx2160a_common.h b/include/configs/lx2160a_common.h
index 0017ac5773..3b7516aace 100644
--- a/include/configs/lx2160a_common.h
+++ b/include/configs/lx2160a_common.h
@@ -158,6 +158,13 @@
#define NXP_FSPI_FLASH_NUM 1
#endif
+/* GPIO */
+#ifdef CONFIG_DM_GPIO
+#ifndef CONFIG_MPC8XXX_GPIO
+#define CONFIG_MPC8XXX_GPIO
+#endif
+#endif
+
#ifndef __ASSEMBLY__
unsigned long get_board_sys_clk(void);
unsigned long get_board_ddr_clk(void);
--
2.17.1
^ permalink raw reply related [flat|nested] 35+ messages in thread
* [v2 15/33] configs: ls1046a: enable MPC8XXX_GPIO
2020-12-08 8:58 [v2 00/33] gpio: layerscape: fix gpio bug and enable gpio Biwen Li
` (13 preceding siblings ...)
2020-12-08 8:58 ` [v2 14/33] configs: lx2160a: " Biwen Li
@ 2020-12-08 8:58 ` Biwen Li
2020-12-08 8:58 ` [v2 16/33] configs: ls1021atwr: enable CONFIG_MPC8XXX_GPIO Biwen Li
` (17 subsequent siblings)
32 siblings, 0 replies; 35+ messages in thread
From: Biwen Li @ 2020-12-08 8:58 UTC (permalink / raw)
To: u-boot
From: Biwen Li <biwen.li@nxp.com>
Enable MPC8XXX_GPIO for SoC LS1046A
Signed-off-by: Biwen Li <biwen.li@nxp.com>
---
include/configs/ls1046a_common.h | 7 +++++++
1 file changed, 7 insertions(+)
diff --git a/include/configs/ls1046a_common.h b/include/configs/ls1046a_common.h
index d44a7f105e..32658cf641 100644
--- a/include/configs/ls1046a_common.h
+++ b/include/configs/ls1046a_common.h
@@ -126,6 +126,13 @@
#define CONFIG_SYS_MONITOR_LEN 0xa0000
#endif
+/* GPIO */
+#ifdef CONFIG_DM_GPIO
+#ifndef CONFIG_MPC8XXX_GPIO
+#define CONFIG_MPC8XXX_GPIO
+#endif
+#endif
+
/* I2C */
#ifndef CONFIG_DM_I2C
#define CONFIG_SYS_I2C
--
2.17.1
^ permalink raw reply related [flat|nested] 35+ messages in thread
* [v2 16/33] configs: ls1021atwr: enable CONFIG_MPC8XXX_GPIO
2020-12-08 8:58 [v2 00/33] gpio: layerscape: fix gpio bug and enable gpio Biwen Li
` (14 preceding siblings ...)
2020-12-08 8:58 ` [v2 15/33] configs: ls1046a: enable MPC8XXX_GPIO Biwen Li
@ 2020-12-08 8:58 ` Biwen Li
2020-12-08 8:58 ` [v2 17/33] configs: ls1021aqds: " Biwen Li
` (16 subsequent siblings)
32 siblings, 0 replies; 35+ messages in thread
From: Biwen Li @ 2020-12-08 8:58 UTC (permalink / raw)
To: u-boot
From: Biwen Li <biwen.li@nxp.com>
Enable CONFIG_MPC8XXX_GPIO for board ls1021atwr
Signed-off-by: Biwen Li <biwen.li@nxp.com>
---
include/configs/ls1021atwr.h | 7 +++++++
1 file changed, 7 insertions(+)
diff --git a/include/configs/ls1021atwr.h b/include/configs/ls1021atwr.h
index 3e85bb3850..dfb56437d9 100644
--- a/include/configs/ls1021atwr.h
+++ b/include/configs/ls1021atwr.h
@@ -219,6 +219,13 @@
#define CONFIG_SYS_I2C_MXC_I2C2 /* enable I2C bus 2 */
#define CONFIG_SYS_I2C_MXC_I2C3 /* enable I2C bus 3 */
+/* GPIO */
+#ifdef CONFIG_DM_GPIO
+#ifndef CONFIG_MPC8XXX_GPIO
+#define CONFIG_MPC8XXX_GPIO
+#endif
+#endif
+
/* EEPROM */
#define CONFIG_ID_EEPROM
#define CONFIG_SYS_I2C_EEPROM_NXID
--
2.17.1
^ permalink raw reply related [flat|nested] 35+ messages in thread
* [v2 17/33] configs: ls1021aqds: enable CONFIG_MPC8XXX_GPIO
2020-12-08 8:58 [v2 00/33] gpio: layerscape: fix gpio bug and enable gpio Biwen Li
` (15 preceding siblings ...)
2020-12-08 8:58 ` [v2 16/33] configs: ls1021atwr: enable CONFIG_MPC8XXX_GPIO Biwen Li
@ 2020-12-08 8:58 ` Biwen Li
2020-12-08 8:58 ` [v2 18/33] configs: ls1012afrwy: enable CMD_GPIO Biwen Li
` (15 subsequent siblings)
32 siblings, 0 replies; 35+ messages in thread
From: Biwen Li @ 2020-12-08 8:58 UTC (permalink / raw)
To: u-boot
From: Biwen Li <biwen.li@nxp.com>
Enable CONFIG_MPC8XXX_GPIO for board ls1021aqds
Signed-off-by: Biwen Li <biwen.li@nxp.com>
---
include/configs/ls1021aqds.h | 7 +++++++
1 file changed, 7 insertions(+)
diff --git a/include/configs/ls1021aqds.h b/include/configs/ls1021aqds.h
index eb6f1c1e5b..b4c70333de 100644
--- a/include/configs/ls1021aqds.h
+++ b/include/configs/ls1021aqds.h
@@ -341,6 +341,13 @@ unsigned long get_board_ddr_clk(void);
#define CONFIG_SYS_I2C_MXC_I2C2 /* enable I2C bus 2 */
#define CONFIG_SYS_I2C_MXC_I2C3 /* enable I2C bus 3 */
+/* GPIO */
+#ifdef CONFIG_DM_GPIO
+#ifndef CONFIG_MPC8XXX_GPIO
+#define CONFIG_MPC8XXX_GPIO
+#endif
+#endif
+
/* EEPROM */
#define CONFIG_ID_EEPROM
#define CONFIG_SYS_I2C_EEPROM_NXID
--
2.17.1
^ permalink raw reply related [flat|nested] 35+ messages in thread
* [v2 18/33] configs: ls1012afrwy: enable CMD_GPIO
2020-12-08 8:58 [v2 00/33] gpio: layerscape: fix gpio bug and enable gpio Biwen Li
` (16 preceding siblings ...)
2020-12-08 8:58 ` [v2 17/33] configs: ls1021aqds: " Biwen Li
@ 2020-12-08 8:58 ` Biwen Li
2020-12-08 8:58 ` [v2 19/33] configs: ls1012ardb: " Biwen Li
` (14 subsequent siblings)
32 siblings, 0 replies; 35+ messages in thread
From: Biwen Li @ 2020-12-08 8:58 UTC (permalink / raw)
To: u-boot
From: Biwen Li <biwen.li@nxp.com>
Enable CMD_GPIO for ls1012afrwy
Signed-off-by: Biwen Li <biwen.li@nxp.com>
---
configs/ls1012afrwy_qspi_SECURE_BOOT_defconfig | 1 +
configs/ls1012afrwy_qspi_defconfig | 1 +
configs/ls1012afrwy_tfa_SECURE_BOOT_defconfig | 1 +
configs/ls1012afrwy_tfa_defconfig | 1 +
4 files changed, 4 insertions(+)
diff --git a/configs/ls1012afrwy_qspi_SECURE_BOOT_defconfig b/configs/ls1012afrwy_qspi_SECURE_BOOT_defconfig
index a0217fdd85..2cc4cd3fb8 100644
--- a/configs/ls1012afrwy_qspi_SECURE_BOOT_defconfig
+++ b/configs/ls1012afrwy_qspi_SECURE_BOOT_defconfig
@@ -26,6 +26,7 @@ CONFIG_CMD_GREPENV=y
CONFIG_CMD_MEMINFO=y
CONFIG_CMD_MEMTEST=y
CONFIG_CMD_GPT=y
+CONFIG_CMD_GPIO=y
CONFIG_CMD_I2C=y
CONFIG_CMD_MMC=y
CONFIG_CMD_PCI=y
diff --git a/configs/ls1012afrwy_qspi_defconfig b/configs/ls1012afrwy_qspi_defconfig
index 6b8212c76d..9def6655b5 100644
--- a/configs/ls1012afrwy_qspi_defconfig
+++ b/configs/ls1012afrwy_qspi_defconfig
@@ -27,6 +27,7 @@ CONFIG_CMD_GREPENV=y
CONFIG_CMD_MEMINFO=y
CONFIG_CMD_MEMTEST=y
CONFIG_CMD_GPT=y
+CONFIG_CMD_GPIO=y
CONFIG_CMD_I2C=y
CONFIG_CMD_MMC=y
CONFIG_CMD_PCI=y
diff --git a/configs/ls1012afrwy_tfa_SECURE_BOOT_defconfig b/configs/ls1012afrwy_tfa_SECURE_BOOT_defconfig
index b85513115f..3d5407d928 100644
--- a/configs/ls1012afrwy_tfa_SECURE_BOOT_defconfig
+++ b/configs/ls1012afrwy_tfa_SECURE_BOOT_defconfig
@@ -26,6 +26,7 @@ CONFIG_CMD_GREPENV=y
CONFIG_CMD_MEMINFO=y
CONFIG_CMD_MEMTEST=y
CONFIG_CMD_GPT=y
+CONFIG_CMD_GPIO=y
CONFIG_CMD_I2C=y
CONFIG_CMD_MMC=y
CONFIG_CMD_PCI=y
diff --git a/configs/ls1012afrwy_tfa_defconfig b/configs/ls1012afrwy_tfa_defconfig
index b773738a6b..30a7ed889d 100644
--- a/configs/ls1012afrwy_tfa_defconfig
+++ b/configs/ls1012afrwy_tfa_defconfig
@@ -27,6 +27,7 @@ CONFIG_CMD_GREPENV=y
CONFIG_CMD_MEMINFO=y
CONFIG_CMD_MEMTEST=y
CONFIG_CMD_GPT=y
+CONFIG_CMD_GPIO=y
CONFIG_CMD_I2C=y
CONFIG_CMD_MMC=y
CONFIG_CMD_PCI=y
--
2.17.1
^ permalink raw reply related [flat|nested] 35+ messages in thread
* [v2 19/33] configs: ls1012ardb: enable CMD_GPIO
2020-12-08 8:58 [v2 00/33] gpio: layerscape: fix gpio bug and enable gpio Biwen Li
` (17 preceding siblings ...)
2020-12-08 8:58 ` [v2 18/33] configs: ls1012afrwy: enable CMD_GPIO Biwen Li
@ 2020-12-08 8:58 ` Biwen Li
2020-12-08 8:58 ` [v2 20/33] configs: ls1021aqds: " Biwen Li
` (13 subsequent siblings)
32 siblings, 0 replies; 35+ messages in thread
From: Biwen Li @ 2020-12-08 8:58 UTC (permalink / raw)
To: u-boot
From: Biwen Li <biwen.li@nxp.com>
Enable CMD_GPIO for ls1012ardb
Signed-off-by: Biwen Li <biwen.li@nxp.com>
---
configs/ls1012ardb_qspi_SECURE_BOOT_defconfig | 1 +
configs/ls1012ardb_qspi_defconfig | 1 +
configs/ls1012ardb_tfa_SECURE_BOOT_defconfig | 1 +
configs/ls1012ardb_tfa_defconfig | 1 +
4 files changed, 4 insertions(+)
diff --git a/configs/ls1012ardb_qspi_SECURE_BOOT_defconfig b/configs/ls1012ardb_qspi_SECURE_BOOT_defconfig
index be59d29dc2..ade297a0a1 100644
--- a/configs/ls1012ardb_qspi_SECURE_BOOT_defconfig
+++ b/configs/ls1012ardb_qspi_SECURE_BOOT_defconfig
@@ -28,6 +28,7 @@ CONFIG_CMD_GREPENV=y
CONFIG_CMD_MEMINFO=y
CONFIG_CMD_MEMTEST=y
CONFIG_CMD_GPT=y
+CONFIG_CMD_GPIO=y
CONFIG_CMD_I2C=y
CONFIG_CMD_MMC=y
CONFIG_CMD_PCI=y
diff --git a/configs/ls1012ardb_qspi_defconfig b/configs/ls1012ardb_qspi_defconfig
index e6742ecb21..2967877da3 100644
--- a/configs/ls1012ardb_qspi_defconfig
+++ b/configs/ls1012ardb_qspi_defconfig
@@ -28,6 +28,7 @@ CONFIG_CMD_GREPENV=y
CONFIG_CMD_MEMINFO=y
CONFIG_CMD_MEMTEST=y
CONFIG_CMD_GPT=y
+CONFIG_CMD_GPIO=y
CONFIG_CMD_I2C=y
CONFIG_CMD_MMC=y
CONFIG_CMD_PCI=y
diff --git a/configs/ls1012ardb_tfa_SECURE_BOOT_defconfig b/configs/ls1012ardb_tfa_SECURE_BOOT_defconfig
index fdf4703d20..168d4f759f 100644
--- a/configs/ls1012ardb_tfa_SECURE_BOOT_defconfig
+++ b/configs/ls1012ardb_tfa_SECURE_BOOT_defconfig
@@ -28,6 +28,7 @@ CONFIG_CMD_GREPENV=y
CONFIG_CMD_MEMINFO=y
CONFIG_CMD_MEMTEST=y
CONFIG_CMD_GPT=y
+CONFIG_CMD_GPIO=y
CONFIG_CMD_I2C=y
CONFIG_CMD_MMC=y
CONFIG_CMD_PCI=y
diff --git a/configs/ls1012ardb_tfa_defconfig b/configs/ls1012ardb_tfa_defconfig
index 42bfa9b188..d38272d051 100644
--- a/configs/ls1012ardb_tfa_defconfig
+++ b/configs/ls1012ardb_tfa_defconfig
@@ -28,6 +28,7 @@ CONFIG_CMD_GREPENV=y
CONFIG_CMD_MEMINFO=y
CONFIG_CMD_MEMTEST=y
CONFIG_CMD_GPT=y
+CONFIG_CMD_GPIO=y
CONFIG_CMD_I2C=y
CONFIG_CMD_MMC=y
CONFIG_CMD_PCI=y
--
2.17.1
^ permalink raw reply related [flat|nested] 35+ messages in thread
* [v2 20/33] configs: ls1021aqds: enable CMD_GPIO
2020-12-08 8:58 [v2 00/33] gpio: layerscape: fix gpio bug and enable gpio Biwen Li
` (18 preceding siblings ...)
2020-12-08 8:58 ` [v2 19/33] configs: ls1012ardb: " Biwen Li
@ 2020-12-08 8:58 ` Biwen Li
2020-12-08 8:58 ` [v2 21/33] configs: ls1021atwr: " Biwen Li
` (12 subsequent siblings)
32 siblings, 0 replies; 35+ messages in thread
From: Biwen Li @ 2020-12-08 8:58 UTC (permalink / raw)
To: u-boot
From: Biwen Li <biwen.li@nxp.com>
Enable CMD_GPIO for board ls1021aqds
Signed-off-by: Biwen Li <biwen.li@nxp.com>
---
configs/ls1021aqds_ddr4_nor_defconfig | 1 +
configs/ls1021aqds_ddr4_nor_lpuart_defconfig | 1 +
configs/ls1021aqds_nand_defconfig | 1 +
configs/ls1021aqds_nor_SECURE_BOOT_defconfig | 1 +
configs/ls1021aqds_nor_defconfig | 1 +
configs/ls1021aqds_nor_lpuart_defconfig | 1 +
configs/ls1021aqds_qspi_defconfig | 1 +
configs/ls1021aqds_sdcard_ifc_defconfig | 1 +
configs/ls1021aqds_sdcard_qspi_defconfig | 1 +
9 files changed, 9 insertions(+)
diff --git a/configs/ls1021aqds_ddr4_nor_defconfig b/configs/ls1021aqds_ddr4_nor_defconfig
index a581f9bdc0..4053a4e406 100644
--- a/configs/ls1021aqds_ddr4_nor_defconfig
+++ b/configs/ls1021aqds_ddr4_nor_defconfig
@@ -24,6 +24,7 @@ CONFIG_CMD_GREPENV=y
CONFIG_CMD_MEMINFO=y
CONFIG_CMD_MEMTEST=y
CONFIG_CMD_GPT=y
+CONFIG_CMD_GPIO=y
CONFIG_CMD_I2C=y
CONFIG_CMD_MMC=y
CONFIG_CMD_NAND=y
diff --git a/configs/ls1021aqds_ddr4_nor_lpuart_defconfig b/configs/ls1021aqds_ddr4_nor_lpuart_defconfig
index 1bba6f5250..095bc0e3f5 100644
--- a/configs/ls1021aqds_ddr4_nor_lpuart_defconfig
+++ b/configs/ls1021aqds_ddr4_nor_lpuart_defconfig
@@ -25,6 +25,7 @@ CONFIG_CMD_GREPENV=y
CONFIG_CMD_MEMINFO=y
CONFIG_CMD_MEMTEST=y
CONFIG_CMD_GPT=y
+CONFIG_CMD_GPIO=y
CONFIG_CMD_I2C=y
CONFIG_CMD_MMC=y
CONFIG_CMD_NAND=y
diff --git a/configs/ls1021aqds_nand_defconfig b/configs/ls1021aqds_nand_defconfig
index c32f5e1948..d8abdb917b 100644
--- a/configs/ls1021aqds_nand_defconfig
+++ b/configs/ls1021aqds_nand_defconfig
@@ -40,6 +40,7 @@ CONFIG_CMD_GREPENV=y
CONFIG_CMD_MEMINFO=y
CONFIG_CMD_MEMTEST=y
CONFIG_CMD_GPT=y
+CONFIG_CMD_GPIO=y
CONFIG_CMD_I2C=y
CONFIG_CMD_MMC=y
CONFIG_CMD_NAND=y
diff --git a/configs/ls1021aqds_nor_SECURE_BOOT_defconfig b/configs/ls1021aqds_nor_SECURE_BOOT_defconfig
index ea490708cc..7e1ed5c591 100644
--- a/configs/ls1021aqds_nor_SECURE_BOOT_defconfig
+++ b/configs/ls1021aqds_nor_SECURE_BOOT_defconfig
@@ -25,6 +25,7 @@ CONFIG_CMD_GREPENV=y
CONFIG_CMD_MEMINFO=y
CONFIG_CMD_MEMTEST=y
CONFIG_CMD_GPT=y
+CONFIG_CMD_GPIO=y
CONFIG_CMD_I2C=y
CONFIG_CMD_MMC=y
CONFIG_CMD_NAND=y
diff --git a/configs/ls1021aqds_nor_defconfig b/configs/ls1021aqds_nor_defconfig
index 7ba5d2d07c..216d0fc470 100644
--- a/configs/ls1021aqds_nor_defconfig
+++ b/configs/ls1021aqds_nor_defconfig
@@ -24,6 +24,7 @@ CONFIG_CMD_GREPENV=y
CONFIG_CMD_MEMINFO=y
CONFIG_CMD_MEMTEST=y
CONFIG_CMD_GPT=y
+CONFIG_CMD_GPIO=y
CONFIG_CMD_I2C=y
CONFIG_CMD_MMC=y
CONFIG_CMD_NAND=y
diff --git a/configs/ls1021aqds_nor_lpuart_defconfig b/configs/ls1021aqds_nor_lpuart_defconfig
index 13ce8588d3..7bb003142d 100644
--- a/configs/ls1021aqds_nor_lpuart_defconfig
+++ b/configs/ls1021aqds_nor_lpuart_defconfig
@@ -25,6 +25,7 @@ CONFIG_CMD_GREPENV=y
CONFIG_CMD_MEMINFO=y
CONFIG_CMD_MEMTEST=y
CONFIG_CMD_GPT=y
+CONFIG_CMD_GPIO=y
CONFIG_CMD_I2C=y
CONFIG_CMD_MMC=y
CONFIG_CMD_NAND=y
diff --git a/configs/ls1021aqds_qspi_defconfig b/configs/ls1021aqds_qspi_defconfig
index dcf0dbb4a6..a606e2ac7c 100644
--- a/configs/ls1021aqds_qspi_defconfig
+++ b/configs/ls1021aqds_qspi_defconfig
@@ -26,6 +26,7 @@ CONFIG_CMD_GREPENV=y
CONFIG_CMD_MEMINFO=y
CONFIG_CMD_MEMTEST=y
CONFIG_CMD_GPT=y
+CONFIG_CMD_GPIO=y
CONFIG_CMD_I2C=y
CONFIG_CMD_MMC=y
CONFIG_CMD_USB=y
diff --git a/configs/ls1021aqds_sdcard_ifc_defconfig b/configs/ls1021aqds_sdcard_ifc_defconfig
index 5e6f531ee8..1b2d016901 100644
--- a/configs/ls1021aqds_sdcard_ifc_defconfig
+++ b/configs/ls1021aqds_sdcard_ifc_defconfig
@@ -38,6 +38,7 @@ CONFIG_CMD_GREPENV=y
CONFIG_CMD_MEMINFO=y
CONFIG_CMD_MEMTEST=y
CONFIG_CMD_GPT=y
+CONFIG_CMD_GPIO=y
CONFIG_CMD_I2C=y
CONFIG_CMD_MMC=y
CONFIG_CMD_NAND=y
diff --git a/configs/ls1021aqds_sdcard_qspi_defconfig b/configs/ls1021aqds_sdcard_qspi_defconfig
index 5477d702b2..3f08c28034 100644
--- a/configs/ls1021aqds_sdcard_qspi_defconfig
+++ b/configs/ls1021aqds_sdcard_qspi_defconfig
@@ -37,6 +37,7 @@ CONFIG_CMD_GREPENV=y
CONFIG_CMD_MEMINFO=y
CONFIG_CMD_MEMTEST=y
CONFIG_CMD_GPT=y
+CONFIG_CMD_GPIO=y
CONFIG_CMD_I2C=y
CONFIG_CMD_MMC=y
CONFIG_CMD_USB=y
--
2.17.1
^ permalink raw reply related [flat|nested] 35+ messages in thread
* [v2 21/33] configs: ls1021atwr: enable CMD_GPIO
2020-12-08 8:58 [v2 00/33] gpio: layerscape: fix gpio bug and enable gpio Biwen Li
` (19 preceding siblings ...)
2020-12-08 8:58 ` [v2 20/33] configs: ls1021aqds: " Biwen Li
@ 2020-12-08 8:58 ` Biwen Li
2020-12-08 8:58 ` [v2 22/33] configs: ls1028aqds: " Biwen Li
` (11 subsequent siblings)
32 siblings, 0 replies; 35+ messages in thread
From: Biwen Li @ 2020-12-08 8:58 UTC (permalink / raw)
To: u-boot
From: Biwen Li <biwen.li@nxp.com>
Enable CMD_GPIO for ls1021atwr
Signed-off-by: Biwen Li <biwen.li@nxp.com>
---
configs/ls1021atwr_nor_SECURE_BOOT_defconfig | 1 +
configs/ls1021atwr_nor_defconfig | 1 +
configs/ls1021atwr_nor_lpuart_defconfig | 1 +
configs/ls1021atwr_qspi_defconfig | 1 +
configs/ls1021atwr_sdcard_ifc_SECURE_BOOT_defconfig | 1 +
configs/ls1021atwr_sdcard_ifc_defconfig | 1 +
configs/ls1021atwr_sdcard_qspi_defconfig | 1 +
7 files changed, 7 insertions(+)
diff --git a/configs/ls1021atwr_nor_SECURE_BOOT_defconfig b/configs/ls1021atwr_nor_SECURE_BOOT_defconfig
index f13428d4f0..59c537ad7a 100644
--- a/configs/ls1021atwr_nor_SECURE_BOOT_defconfig
+++ b/configs/ls1021atwr_nor_SECURE_BOOT_defconfig
@@ -26,6 +26,7 @@ CONFIG_CMD_GREPENV=y
CONFIG_CMD_MEMINFO=y
CONFIG_CMD_MEMTEST=y
CONFIG_CMD_GPT=y
+CONFIG_CMD_GPIO=y
CONFIG_CMD_I2C=y
CONFIG_CMD_MMC=y
CONFIG_CMD_USB=y
diff --git a/configs/ls1021atwr_nor_defconfig b/configs/ls1021atwr_nor_defconfig
index a17b66ea4c..8108d160f7 100644
--- a/configs/ls1021atwr_nor_defconfig
+++ b/configs/ls1021atwr_nor_defconfig
@@ -25,6 +25,7 @@ CONFIG_CMD_GREPENV=y
CONFIG_CMD_MEMINFO=y
CONFIG_CMD_MEMTEST=y
CONFIG_CMD_GPT=y
+CONFIG_CMD_GPIO=y
CONFIG_CMD_I2C=y
CONFIG_CMD_MMC=y
CONFIG_CMD_USB=y
diff --git a/configs/ls1021atwr_nor_lpuart_defconfig b/configs/ls1021atwr_nor_lpuart_defconfig
index 10ce045445..91767e0a9f 100644
--- a/configs/ls1021atwr_nor_lpuart_defconfig
+++ b/configs/ls1021atwr_nor_lpuart_defconfig
@@ -27,6 +27,7 @@ CONFIG_CMD_GREPENV=y
CONFIG_CMD_MEMINFO=y
CONFIG_CMD_MEMTEST=y
CONFIG_CMD_GPT=y
+CONFIG_CMD_GPIO=y
CONFIG_CMD_I2C=y
CONFIG_CMD_MMC=y
CONFIG_CMD_USB=y
diff --git a/configs/ls1021atwr_qspi_defconfig b/configs/ls1021atwr_qspi_defconfig
index bd9dc934a0..e08f77f06f 100644
--- a/configs/ls1021atwr_qspi_defconfig
+++ b/configs/ls1021atwr_qspi_defconfig
@@ -28,6 +28,7 @@ CONFIG_CMD_GREPENV=y
CONFIG_CMD_MEMINFO=y
CONFIG_CMD_MEMTEST=y
CONFIG_CMD_GPT=y
+CONFIG_CMD_GPIO=y
CONFIG_CMD_I2C=y
CONFIG_CMD_MMC=y
CONFIG_CMD_USB=y
diff --git a/configs/ls1021atwr_sdcard_ifc_SECURE_BOOT_defconfig b/configs/ls1021atwr_sdcard_ifc_SECURE_BOOT_defconfig
index 41b16758f5..e51dab0788 100644
--- a/configs/ls1021atwr_sdcard_ifc_SECURE_BOOT_defconfig
+++ b/configs/ls1021atwr_sdcard_ifc_SECURE_BOOT_defconfig
@@ -41,6 +41,7 @@ CONFIG_CMD_GREPENV=y
CONFIG_CMD_MEMINFO=y
CONFIG_CMD_MEMTEST=y
CONFIG_CMD_GPT=y
+CONFIG_CMD_GPIO=y
CONFIG_CMD_I2C=y
CONFIG_CMD_MMC=y
CONFIG_CMD_USB=y
diff --git a/configs/ls1021atwr_sdcard_ifc_defconfig b/configs/ls1021atwr_sdcard_ifc_defconfig
index 5a40bb213a..60e907a2b4 100644
--- a/configs/ls1021atwr_sdcard_ifc_defconfig
+++ b/configs/ls1021atwr_sdcard_ifc_defconfig
@@ -40,6 +40,7 @@ CONFIG_CMD_GREPENV=y
CONFIG_CMD_MEMINFO=y
CONFIG_CMD_MEMTEST=y
CONFIG_CMD_GPT=y
+CONFIG_CMD_GPIO=y
CONFIG_CMD_I2C=y
CONFIG_CMD_MMC=y
CONFIG_CMD_USB=y
diff --git a/configs/ls1021atwr_sdcard_qspi_defconfig b/configs/ls1021atwr_sdcard_qspi_defconfig
index 957790288d..3365d7399c 100644
--- a/configs/ls1021atwr_sdcard_qspi_defconfig
+++ b/configs/ls1021atwr_sdcard_qspi_defconfig
@@ -39,6 +39,7 @@ CONFIG_CMD_GREPENV=y
CONFIG_CMD_MEMINFO=y
CONFIG_CMD_MEMTEST=y
CONFIG_CMD_GPT=y
+CONFIG_CMD_GPIO=y
CONFIG_CMD_I2C=y
CONFIG_CMD_MMC=y
CONFIG_CMD_USB=y
--
2.17.1
^ permalink raw reply related [flat|nested] 35+ messages in thread
* [v2 22/33] configs: ls1028aqds: enable CMD_GPIO
2020-12-08 8:58 [v2 00/33] gpio: layerscape: fix gpio bug and enable gpio Biwen Li
` (20 preceding siblings ...)
2020-12-08 8:58 ` [v2 21/33] configs: ls1021atwr: " Biwen Li
@ 2020-12-08 8:58 ` Biwen Li
2020-12-08 8:58 ` [v2 23/33] configs: ls1028ardb: " Biwen Li
` (10 subsequent siblings)
32 siblings, 0 replies; 35+ messages in thread
From: Biwen Li @ 2020-12-08 8:58 UTC (permalink / raw)
To: u-boot
From: Biwen Li <biwen.li@nxp.com>
Enable CMD_GPIO for board ls1028aqds
Signed-off-by: Biwen Li <biwen.li@nxp.com>
---
configs/ls1028aqds_tfa_SECURE_BOOT_defconfig | 1 +
configs/ls1028aqds_tfa_defconfig | 1 +
configs/ls1028aqds_tfa_lpuart_defconfig | 1 +
3 files changed, 3 insertions(+)
diff --git a/configs/ls1028aqds_tfa_SECURE_BOOT_defconfig b/configs/ls1028aqds_tfa_SECURE_BOOT_defconfig
index 14c49cd0d6..7e75a2f121 100644
--- a/configs/ls1028aqds_tfa_SECURE_BOOT_defconfig
+++ b/configs/ls1028aqds_tfa_SECURE_BOOT_defconfig
@@ -26,6 +26,7 @@ CONFIG_CMD_GREPENV=y
CONFIG_CMD_MEMTEST=y
CONFIG_CMD_DM=y
CONFIG_CMD_GPT=y
+CONFIG_CMD_GPIO=y
CONFIG_CMD_I2C=y
CONFIG_CMD_MMC=y
CONFIG_CMD_PCI=y
diff --git a/configs/ls1028aqds_tfa_defconfig b/configs/ls1028aqds_tfa_defconfig
index 09a6923708..886556b600 100644
--- a/configs/ls1028aqds_tfa_defconfig
+++ b/configs/ls1028aqds_tfa_defconfig
@@ -27,6 +27,7 @@ CONFIG_CMD_GREPENV=y
CONFIG_CMD_MEMTEST=y
CONFIG_CMD_DM=y
CONFIG_CMD_GPT=y
+CONFIG_CMD_GPIO=y
CONFIG_CMD_I2C=y
CONFIG_CMD_MMC=y
CONFIG_CMD_PCI=y
diff --git a/configs/ls1028aqds_tfa_lpuart_defconfig b/configs/ls1028aqds_tfa_lpuart_defconfig
index a3749b5627..1ec187d260 100644
--- a/configs/ls1028aqds_tfa_lpuart_defconfig
+++ b/configs/ls1028aqds_tfa_lpuart_defconfig
@@ -27,6 +27,7 @@ CONFIG_CMD_GREPENV=y
CONFIG_CMD_MEMTEST=y
CONFIG_CMD_DM=y
CONFIG_CMD_GPT=y
+CONFIG_CMD_GPIO=y
CONFIG_CMD_I2C=y
CONFIG_CMD_MMC=y
CONFIG_CMD_PCI=y
--
2.17.1
^ permalink raw reply related [flat|nested] 35+ messages in thread
* [v2 23/33] configs: ls1028ardb: enable CMD_GPIO
2020-12-08 8:58 [v2 00/33] gpio: layerscape: fix gpio bug and enable gpio Biwen Li
` (21 preceding siblings ...)
2020-12-08 8:58 ` [v2 22/33] configs: ls1028aqds: " Biwen Li
@ 2020-12-08 8:58 ` Biwen Li
2020-12-08 8:58 ` [v2 24/33] configs: ls1043aqds: " Biwen Li
` (9 subsequent siblings)
32 siblings, 0 replies; 35+ messages in thread
From: Biwen Li @ 2020-12-08 8:58 UTC (permalink / raw)
To: u-boot
From: Biwen Li <biwen.li@nxp.com>
Enable CMD_GPIO for board ls1028ardb
Signed-off-by: Biwen Li <biwen.li@nxp.com>
---
configs/ls1028ardb_tfa_SECURE_BOOT_defconfig | 1 +
configs/ls1028ardb_tfa_defconfig | 1 +
2 files changed, 2 insertions(+)
diff --git a/configs/ls1028ardb_tfa_SECURE_BOOT_defconfig b/configs/ls1028ardb_tfa_SECURE_BOOT_defconfig
index b034580aef..1f53f436df 100644
--- a/configs/ls1028ardb_tfa_SECURE_BOOT_defconfig
+++ b/configs/ls1028ardb_tfa_SECURE_BOOT_defconfig
@@ -25,6 +25,7 @@ CONFIG_CMD_GREPENV=y
CONFIG_CMD_MEMTEST=y
CONFIG_CMD_DM=y
CONFIG_CMD_GPT=y
+CONFIG_CMD_GPIO=y
CONFIG_CMD_I2C=y
CONFIG_CMD_MMC=y
CONFIG_CMD_PCI=y
diff --git a/configs/ls1028ardb_tfa_defconfig b/configs/ls1028ardb_tfa_defconfig
index 4bed352420..eb501be091 100644
--- a/configs/ls1028ardb_tfa_defconfig
+++ b/configs/ls1028ardb_tfa_defconfig
@@ -26,6 +26,7 @@ CONFIG_CMD_GREPENV=y
CONFIG_CMD_MEMTEST=y
CONFIG_CMD_DM=y
CONFIG_CMD_GPT=y
+CONFIG_CMD_GPIO=y
CONFIG_CMD_I2C=y
CONFIG_CMD_MMC=y
CONFIG_CMD_PCI=y
--
2.17.1
^ permalink raw reply related [flat|nested] 35+ messages in thread
* [v2 24/33] configs: ls1043aqds: enable CMD_GPIO
2020-12-08 8:58 [v2 00/33] gpio: layerscape: fix gpio bug and enable gpio Biwen Li
` (22 preceding siblings ...)
2020-12-08 8:58 ` [v2 23/33] configs: ls1028ardb: " Biwen Li
@ 2020-12-08 8:58 ` Biwen Li
2020-12-08 8:58 ` [v2 25/33] configs: ls1043ardb: " Biwen Li
` (8 subsequent siblings)
32 siblings, 0 replies; 35+ messages in thread
From: Biwen Li @ 2020-12-08 8:58 UTC (permalink / raw)
To: u-boot
From: Biwen Li <biwen.li@nxp.com>
Enable CMD_GPIO for board ls1043aqds
Signed-off-by: Biwen Li <biwen.li@nxp.com>
---
configs/ls1043aqds_defconfig | 1 +
configs/ls1043aqds_lpuart_defconfig | 1 +
configs/ls1043aqds_nand_defconfig | 1 +
configs/ls1043aqds_nor_ddr3_defconfig | 1 +
configs/ls1043aqds_qspi_defconfig | 1 +
configs/ls1043aqds_sdcard_ifc_defconfig | 1 +
configs/ls1043aqds_sdcard_qspi_defconfig | 1 +
configs/ls1043aqds_tfa_SECURE_BOOT_defconfig | 1 +
configs/ls1043aqds_tfa_defconfig | 1 +
9 files changed, 9 insertions(+)
diff --git a/configs/ls1043aqds_defconfig b/configs/ls1043aqds_defconfig
index b24a316e49..b4e100dfa7 100644
--- a/configs/ls1043aqds_defconfig
+++ b/configs/ls1043aqds_defconfig
@@ -24,6 +24,7 @@ CONFIG_CMD_GREPENV=y
CONFIG_CMD_MEMINFO=y
CONFIG_CMD_MEMTEST=y
CONFIG_CMD_GPT=y
+CONFIG_CMD_GPIO=y
CONFIG_CMD_I2C=y
CONFIG_CMD_MMC=y
CONFIG_CMD_NAND=y
diff --git a/configs/ls1043aqds_lpuart_defconfig b/configs/ls1043aqds_lpuart_defconfig
index 805e69d8b2..647cf311fb 100644
--- a/configs/ls1043aqds_lpuart_defconfig
+++ b/configs/ls1043aqds_lpuart_defconfig
@@ -25,6 +25,7 @@ CONFIG_CMD_GREPENV=y
CONFIG_CMD_MEMINFO=y
CONFIG_CMD_MEMTEST=y
CONFIG_CMD_GPT=y
+CONFIG_CMD_GPIO=y
CONFIG_CMD_I2C=y
CONFIG_CMD_MMC=y
CONFIG_CMD_NAND=y
diff --git a/configs/ls1043aqds_nand_defconfig b/configs/ls1043aqds_nand_defconfig
index 6b8c77b614..a7aad4a19f 100644
--- a/configs/ls1043aqds_nand_defconfig
+++ b/configs/ls1043aqds_nand_defconfig
@@ -40,6 +40,7 @@ CONFIG_CMD_GREPENV=y
CONFIG_CMD_MEMINFO=y
CONFIG_CMD_MEMTEST=y
CONFIG_CMD_GPT=y
+CONFIG_CMD_GPIO=y
CONFIG_CMD_I2C=y
CONFIG_CMD_MMC=y
CONFIG_CMD_NAND=y
diff --git a/configs/ls1043aqds_nor_ddr3_defconfig b/configs/ls1043aqds_nor_ddr3_defconfig
index 5c07c912cd..6f303fbed4 100644
--- a/configs/ls1043aqds_nor_ddr3_defconfig
+++ b/configs/ls1043aqds_nor_ddr3_defconfig
@@ -24,6 +24,7 @@ CONFIG_CMD_GREPENV=y
CONFIG_CMD_MEMINFO=y
CONFIG_CMD_MEMTEST=y
CONFIG_CMD_GPT=y
+CONFIG_CMD_GPIO=y
CONFIG_CMD_I2C=y
CONFIG_CMD_MMC=y
CONFIG_CMD_NAND=y
diff --git a/configs/ls1043aqds_qspi_defconfig b/configs/ls1043aqds_qspi_defconfig
index 6188ac5e43..32e894760e 100644
--- a/configs/ls1043aqds_qspi_defconfig
+++ b/configs/ls1043aqds_qspi_defconfig
@@ -26,6 +26,7 @@ CONFIG_CMD_GREPENV=y
CONFIG_CMD_MEMINFO=y
CONFIG_CMD_MEMTEST=y
CONFIG_CMD_GPT=y
+CONFIG_CMD_GPIO=y
CONFIG_CMD_I2C=y
CONFIG_CMD_MMC=y
CONFIG_CMD_USB=y
diff --git a/configs/ls1043aqds_sdcard_ifc_defconfig b/configs/ls1043aqds_sdcard_ifc_defconfig
index a6e77fc4f6..65aa811757 100644
--- a/configs/ls1043aqds_sdcard_ifc_defconfig
+++ b/configs/ls1043aqds_sdcard_ifc_defconfig
@@ -40,6 +40,7 @@ CONFIG_CMD_GREPENV=y
CONFIG_CMD_MEMINFO=y
CONFIG_CMD_MEMTEST=y
CONFIG_CMD_GPT=y
+CONFIG_CMD_GPIO=y
CONFIG_CMD_I2C=y
CONFIG_CMD_MMC=y
CONFIG_CMD_NAND=y
diff --git a/configs/ls1043aqds_sdcard_qspi_defconfig b/configs/ls1043aqds_sdcard_qspi_defconfig
index b426569aab..ddd6b1b1f6 100644
--- a/configs/ls1043aqds_sdcard_qspi_defconfig
+++ b/configs/ls1043aqds_sdcard_qspi_defconfig
@@ -39,6 +39,7 @@ CONFIG_CMD_GREPENV=y
CONFIG_CMD_MEMINFO=y
CONFIG_CMD_MEMTEST=y
CONFIG_CMD_GPT=y
+CONFIG_CMD_GPIO=y
CONFIG_CMD_I2C=y
CONFIG_CMD_MMC=y
CONFIG_CMD_USB=y
diff --git a/configs/ls1043aqds_tfa_SECURE_BOOT_defconfig b/configs/ls1043aqds_tfa_SECURE_BOOT_defconfig
index 1e3ac53070..faf0142eff 100644
--- a/configs/ls1043aqds_tfa_SECURE_BOOT_defconfig
+++ b/configs/ls1043aqds_tfa_SECURE_BOOT_defconfig
@@ -26,6 +26,7 @@ CONFIG_CMD_GREPENV=y
CONFIG_CMD_MEMINFO=y
CONFIG_CMD_MEMTEST=y
CONFIG_CMD_GPT=y
+CONFIG_CMD_GPIO=y
CONFIG_CMD_I2C=y
CONFIG_CMD_MMC=y
CONFIG_CMD_NAND=y
diff --git a/configs/ls1043aqds_tfa_defconfig b/configs/ls1043aqds_tfa_defconfig
index 43ac60e18b..ecb0b8daf0 100644
--- a/configs/ls1043aqds_tfa_defconfig
+++ b/configs/ls1043aqds_tfa_defconfig
@@ -27,6 +27,7 @@ CONFIG_CMD_GREPENV=y
CONFIG_CMD_MEMINFO=y
CONFIG_CMD_MEMTEST=y
CONFIG_CMD_GPT=y
+CONFIG_CMD_GPIO=y
CONFIG_CMD_I2C=y
CONFIG_CMD_MMC=y
CONFIG_CMD_NAND=y
--
2.17.1
^ permalink raw reply related [flat|nested] 35+ messages in thread
* [v2 25/33] configs: ls1043ardb: enable CMD_GPIO
2020-12-08 8:58 [v2 00/33] gpio: layerscape: fix gpio bug and enable gpio Biwen Li
` (23 preceding siblings ...)
2020-12-08 8:58 ` [v2 24/33] configs: ls1043aqds: " Biwen Li
@ 2020-12-08 8:58 ` Biwen Li
2020-12-08 8:58 ` [v2 26/33] configs: ls1046ardb: " Biwen Li
` (7 subsequent siblings)
32 siblings, 0 replies; 35+ messages in thread
From: Biwen Li @ 2020-12-08 8:58 UTC (permalink / raw)
To: u-boot
From: Biwen Li <biwen.li@nxp.com>
Enable CMD_GPIO for board ls1043ardb
Signed-off-by: Biwen Li <biwen.li@nxp.com>
---
configs/ls1043ardb_SECURE_BOOT_defconfig | 1 +
configs/ls1043ardb_defconfig | 1 +
configs/ls1043ardb_nand_SECURE_BOOT_defconfig | 1 +
configs/ls1043ardb_nand_defconfig | 1 +
configs/ls1043ardb_sdcard_SECURE_BOOT_defconfig | 1 +
configs/ls1043ardb_sdcard_defconfig | 1 +
configs/ls1043ardb_tfa_SECURE_BOOT_defconfig | 1 +
configs/ls1043ardb_tfa_defconfig | 1 +
8 files changed, 8 insertions(+)
diff --git a/configs/ls1043ardb_SECURE_BOOT_defconfig b/configs/ls1043ardb_SECURE_BOOT_defconfig
index 22277a8eb3..c1cede2c59 100644
--- a/configs/ls1043ardb_SECURE_BOOT_defconfig
+++ b/configs/ls1043ardb_SECURE_BOOT_defconfig
@@ -17,6 +17,7 @@ CONFIG_MISC_INIT_R=y
CONFIG_CMD_IMLS=y
CONFIG_CMD_DM=y
CONFIG_CMD_GPT=y
+CONFIG_CMD_GPIO=y
CONFIG_CMD_I2C=y
CONFIG_CMD_MMC=y
CONFIG_CMD_NAND=y
diff --git a/configs/ls1043ardb_defconfig b/configs/ls1043ardb_defconfig
index f32573d98e..c45dc20d72 100644
--- a/configs/ls1043ardb_defconfig
+++ b/configs/ls1043ardb_defconfig
@@ -17,6 +17,7 @@ CONFIG_MISC_INIT_R=y
CONFIG_CMD_IMLS=y
CONFIG_CMD_DM=y
CONFIG_CMD_GPT=y
+CONFIG_CMD_GPIO=y
CONFIG_CMD_I2C=y
CONFIG_CMD_MMC=y
CONFIG_CMD_NAND=y
diff --git a/configs/ls1043ardb_nand_SECURE_BOOT_defconfig b/configs/ls1043ardb_nand_SECURE_BOOT_defconfig
index 84b2950bd6..cfa4ea161d 100644
--- a/configs/ls1043ardb_nand_SECURE_BOOT_defconfig
+++ b/configs/ls1043ardb_nand_SECURE_BOOT_defconfig
@@ -35,6 +35,7 @@ CONFIG_SPL_WATCHDOG_SUPPORT=y
CONFIG_CMD_IMLS=y
CONFIG_CMD_DM=y
CONFIG_CMD_GPT=y
+CONFIG_CMD_GPIO=y
CONFIG_CMD_I2C=y
CONFIG_CMD_MMC=y
CONFIG_CMD_NAND=y
diff --git a/configs/ls1043ardb_nand_defconfig b/configs/ls1043ardb_nand_defconfig
index bb0e2bf419..0fab89c5f0 100644
--- a/configs/ls1043ardb_nand_defconfig
+++ b/configs/ls1043ardb_nand_defconfig
@@ -35,6 +35,7 @@ CONFIG_SPL_WATCHDOG_SUPPORT=y
CONFIG_CMD_IMLS=y
CONFIG_CMD_DM=y
CONFIG_CMD_GPT=y
+CONFIG_CMD_GPIO=y
CONFIG_CMD_I2C=y
CONFIG_CMD_MMC=y
CONFIG_CMD_NAND=y
diff --git a/configs/ls1043ardb_sdcard_SECURE_BOOT_defconfig b/configs/ls1043ardb_sdcard_SECURE_BOOT_defconfig
index 34cbd24d0b..849f0d7938 100644
--- a/configs/ls1043ardb_sdcard_SECURE_BOOT_defconfig
+++ b/configs/ls1043ardb_sdcard_SECURE_BOOT_defconfig
@@ -35,6 +35,7 @@ CONFIG_CMD_IMLS=y
CONFIG_CMD_SPL=y
CONFIG_CMD_DM=y
CONFIG_CMD_GPT=y
+CONFIG_CMD_GPIO=y
CONFIG_CMD_I2C=y
CONFIG_CMD_MMC=y
CONFIG_CMD_NAND=y
diff --git a/configs/ls1043ardb_sdcard_defconfig b/configs/ls1043ardb_sdcard_defconfig
index ff2e669905..f500420338 100644
--- a/configs/ls1043ardb_sdcard_defconfig
+++ b/configs/ls1043ardb_sdcard_defconfig
@@ -34,6 +34,7 @@ CONFIG_CMD_IMLS=y
CONFIG_CMD_SPL=y
CONFIG_CMD_DM=y
CONFIG_CMD_GPT=y
+CONFIG_CMD_GPIO=y
CONFIG_CMD_I2C=y
CONFIG_CMD_MMC=y
CONFIG_CMD_NAND=y
diff --git a/configs/ls1043ardb_tfa_SECURE_BOOT_defconfig b/configs/ls1043ardb_tfa_SECURE_BOOT_defconfig
index 93f9b9a981..e8976304c1 100644
--- a/configs/ls1043ardb_tfa_SECURE_BOOT_defconfig
+++ b/configs/ls1043ardb_tfa_SECURE_BOOT_defconfig
@@ -19,6 +19,7 @@ CONFIG_MISC_INIT_R=y
CONFIG_CMD_IMLS=y
CONFIG_CMD_DM=y
CONFIG_CMD_GPT=y
+CONFIG_CMD_GPIO=y
CONFIG_CMD_I2C=y
CONFIG_CMD_MMC=y
CONFIG_CMD_NAND=y
diff --git a/configs/ls1043ardb_tfa_defconfig b/configs/ls1043ardb_tfa_defconfig
index a74f124107..4b1f679acb 100644
--- a/configs/ls1043ardb_tfa_defconfig
+++ b/configs/ls1043ardb_tfa_defconfig
@@ -20,6 +20,7 @@ CONFIG_MISC_INIT_R=y
CONFIG_CMD_IMLS=y
CONFIG_CMD_DM=y
CONFIG_CMD_GPT=y
+CONFIG_CMD_GPIO=y
CONFIG_CMD_I2C=y
CONFIG_CMD_MMC=y
CONFIG_CMD_NAND=y
--
2.17.1
^ permalink raw reply related [flat|nested] 35+ messages in thread
* [v2 26/33] configs: ls1046ardb: enable CMD_GPIO
2020-12-08 8:58 [v2 00/33] gpio: layerscape: fix gpio bug and enable gpio Biwen Li
` (24 preceding siblings ...)
2020-12-08 8:58 ` [v2 25/33] configs: ls1043ardb: " Biwen Li
@ 2020-12-08 8:58 ` Biwen Li
2020-12-08 8:58 ` [v2 27/33] configs: ls1046aqds: " Biwen Li
` (6 subsequent siblings)
32 siblings, 0 replies; 35+ messages in thread
From: Biwen Li @ 2020-12-08 8:58 UTC (permalink / raw)
To: u-boot
From: Biwen Li <biwen.li@nxp.com>
Enable CMD_GPIO for board ls1046ardb
Signed-off-by: Biwen Li <biwen.li@nxp.com>
---
configs/ls1046ardb_emmc_defconfig | 1 +
configs/ls1046ardb_qspi_SECURE_BOOT_defconfig | 1 +
configs/ls1046ardb_qspi_defconfig | 1 +
configs/ls1046ardb_qspi_spl_defconfig | 1 +
configs/ls1046ardb_sdcard_SECURE_BOOT_defconfig | 1 +
configs/ls1046ardb_sdcard_defconfig | 1 +
configs/ls1046ardb_tfa_SECURE_BOOT_defconfig | 1 +
configs/ls1046ardb_tfa_defconfig | 1 +
8 files changed, 8 insertions(+)
diff --git a/configs/ls1046ardb_emmc_defconfig b/configs/ls1046ardb_emmc_defconfig
index efb88d034f..49b26c1d26 100644
--- a/configs/ls1046ardb_emmc_defconfig
+++ b/configs/ls1046ardb_emmc_defconfig
@@ -35,6 +35,7 @@ CONFIG_SPL_MPC8XXX_INIT_DDR_SUPPORT=y
CONFIG_SPL_WATCHDOG_SUPPORT=y
CONFIG_CMD_DM=y
CONFIG_CMD_GPT=y
+CONFIG_CMD_GPIO=y
CONFIG_CMD_I2C=y
CONFIG_CMD_MMC=y
CONFIG_CMD_NAND=y
diff --git a/configs/ls1046ardb_qspi_SECURE_BOOT_defconfig b/configs/ls1046ardb_qspi_SECURE_BOOT_defconfig
index 50356dca88..8be734b8a4 100644
--- a/configs/ls1046ardb_qspi_SECURE_BOOT_defconfig
+++ b/configs/ls1046ardb_qspi_SECURE_BOOT_defconfig
@@ -19,6 +19,7 @@ CONFIG_BOOTARGS="console=ttyS0,115200 root=/dev/ram0 earlycon=uart8250,mmio,0x21
CONFIG_MISC_INIT_R=y
CONFIG_CMD_DM=y
CONFIG_CMD_GPT=y
+CONFIG_CMD_GPIO=y
CONFIG_CMD_I2C=y
CONFIG_CMD_MMC=y
CONFIG_CMD_NAND=y
diff --git a/configs/ls1046ardb_qspi_defconfig b/configs/ls1046ardb_qspi_defconfig
index ac1d5abf36..d494c650af 100644
--- a/configs/ls1046ardb_qspi_defconfig
+++ b/configs/ls1046ardb_qspi_defconfig
@@ -20,6 +20,7 @@ CONFIG_BOOTARGS="console=ttyS0,115200 root=/dev/ram0 earlycon=uart8250,mmio,0x21
CONFIG_MISC_INIT_R=y
CONFIG_CMD_DM=y
CONFIG_CMD_GPT=y
+CONFIG_CMD_GPIO=y
CONFIG_CMD_I2C=y
CONFIG_CMD_MMC=y
CONFIG_CMD_NAND=y
diff --git a/configs/ls1046ardb_qspi_spl_defconfig b/configs/ls1046ardb_qspi_spl_defconfig
index b1ac6e0a89..91319c6f0d 100644
--- a/configs/ls1046ardb_qspi_spl_defconfig
+++ b/configs/ls1046ardb_qspi_spl_defconfig
@@ -38,6 +38,7 @@ CONFIG_SPL_WATCHDOG_SUPPORT=y
CONFIG_CMD_SPL=y
CONFIG_CMD_DM=y
CONFIG_CMD_GPT=y
+CONFIG_CMD_GPIO=y
CONFIG_CMD_I2C=y
CONFIG_CMD_MMC=y
CONFIG_CMD_NAND=y
diff --git a/configs/ls1046ardb_sdcard_SECURE_BOOT_defconfig b/configs/ls1046ardb_sdcard_SECURE_BOOT_defconfig
index 525caa6881..0a2c71f919 100644
--- a/configs/ls1046ardb_sdcard_SECURE_BOOT_defconfig
+++ b/configs/ls1046ardb_sdcard_SECURE_BOOT_defconfig
@@ -34,6 +34,7 @@ CONFIG_SPL_MPC8XXX_INIT_DDR_SUPPORT=y
CONFIG_SPL_WATCHDOG_SUPPORT=y
CONFIG_CMD_DM=y
CONFIG_CMD_GPT=y
+CONFIG_CMD_GPIO=y
CONFIG_CMD_I2C=y
CONFIG_CMD_MMC=y
CONFIG_CMD_NAND=y
diff --git a/configs/ls1046ardb_sdcard_defconfig b/configs/ls1046ardb_sdcard_defconfig
index 069b2282b8..a10262e0b4 100644
--- a/configs/ls1046ardb_sdcard_defconfig
+++ b/configs/ls1046ardb_sdcard_defconfig
@@ -34,6 +34,7 @@ CONFIG_SPL_MPC8XXX_INIT_DDR_SUPPORT=y
CONFIG_SPL_WATCHDOG_SUPPORT=y
CONFIG_CMD_DM=y
CONFIG_CMD_GPT=y
+CONFIG_CMD_GPIO=y
CONFIG_CMD_I2C=y
CONFIG_CMD_MMC=y
CONFIG_CMD_NAND=y
diff --git a/configs/ls1046ardb_tfa_SECURE_BOOT_defconfig b/configs/ls1046ardb_tfa_SECURE_BOOT_defconfig
index a4b67a5ca9..a7c68feca9 100644
--- a/configs/ls1046ardb_tfa_SECURE_BOOT_defconfig
+++ b/configs/ls1046ardb_tfa_SECURE_BOOT_defconfig
@@ -20,6 +20,7 @@ CONFIG_BOOTARGS="console=ttyS0,115200 root=/dev/ram0 earlycon=uart8250,mmio,0x21
CONFIG_MISC_INIT_R=y
CONFIG_CMD_DM=y
CONFIG_CMD_GPT=y
+CONFIG_CMD_GPIO=y
CONFIG_CMD_I2C=y
CONFIG_CMD_MMC=y
CONFIG_CMD_NAND=y
diff --git a/configs/ls1046ardb_tfa_defconfig b/configs/ls1046ardb_tfa_defconfig
index 4ed3317018..f8572ccd79 100644
--- a/configs/ls1046ardb_tfa_defconfig
+++ b/configs/ls1046ardb_tfa_defconfig
@@ -21,6 +21,7 @@ CONFIG_BOOTARGS="console=ttyS0,115200 root=/dev/ram0 earlycon=uart8250,mmio,0x21
CONFIG_MISC_INIT_R=y
CONFIG_CMD_DM=y
CONFIG_CMD_GPT=y
+CONFIG_CMD_GPIO=y
CONFIG_CMD_I2C=y
CONFIG_CMD_MMC=y
CONFIG_CMD_NAND=y
--
2.17.1
^ permalink raw reply related [flat|nested] 35+ messages in thread
* [v2 27/33] configs: ls1046aqds: enable CMD_GPIO
2020-12-08 8:58 [v2 00/33] gpio: layerscape: fix gpio bug and enable gpio Biwen Li
` (25 preceding siblings ...)
2020-12-08 8:58 ` [v2 26/33] configs: ls1046ardb: " Biwen Li
@ 2020-12-08 8:58 ` Biwen Li
2020-12-08 8:59 ` [v2 28/33] configs: ls2088ardb: enable DM_GPIO and CMD_GPIO Biwen Li
` (5 subsequent siblings)
32 siblings, 0 replies; 35+ messages in thread
From: Biwen Li @ 2020-12-08 8:58 UTC (permalink / raw)
To: u-boot
From: Biwen Li <biwen.li@nxp.com>
Enable CMD_GPIO for board ls1046aqds
Signed-off-by: Biwen Li <biwen.li@nxp.com>
---
configs/ls1046aqds_SECURE_BOOT_defconfig | 1 +
configs/ls1046aqds_defconfig | 1 +
configs/ls1046aqds_lpuart_defconfig | 1 +
configs/ls1046aqds_nand_defconfig | 1 +
configs/ls1046aqds_qspi_defconfig | 1 +
configs/ls1046aqds_sdcard_ifc_defconfig | 1 +
configs/ls1046aqds_sdcard_qspi_defconfig | 1 +
configs/ls1046aqds_tfa_SECURE_BOOT_defconfig | 1 +
configs/ls1046aqds_tfa_defconfig | 1 +
9 files changed, 9 insertions(+)
diff --git a/configs/ls1046aqds_SECURE_BOOT_defconfig b/configs/ls1046aqds_SECURE_BOOT_defconfig
index ff0f1ccfc4..da63214b55 100644
--- a/configs/ls1046aqds_SECURE_BOOT_defconfig
+++ b/configs/ls1046aqds_SECURE_BOOT_defconfig
@@ -24,6 +24,7 @@ CONFIG_CMD_GREPENV=y
CONFIG_CMD_MEMINFO=y
CONFIG_CMD_MEMTEST=y
CONFIG_CMD_GPT=y
+CONFIG_CMD_GPIO=y
CONFIG_CMD_I2C=y
CONFIG_CMD_MMC=y
CONFIG_CMD_NAND=y
diff --git a/configs/ls1046aqds_defconfig b/configs/ls1046aqds_defconfig
index 10a23af7b6..13310e5d3a 100644
--- a/configs/ls1046aqds_defconfig
+++ b/configs/ls1046aqds_defconfig
@@ -24,6 +24,7 @@ CONFIG_CMD_GREPENV=y
CONFIG_CMD_MEMINFO=y
CONFIG_CMD_MEMTEST=y
CONFIG_CMD_GPT=y
+CONFIG_CMD_GPIO=y
CONFIG_CMD_I2C=y
CONFIG_CMD_MMC=y
CONFIG_CMD_NAND=y
diff --git a/configs/ls1046aqds_lpuart_defconfig b/configs/ls1046aqds_lpuart_defconfig
index 6b07708cae..7ed38abd09 100644
--- a/configs/ls1046aqds_lpuart_defconfig
+++ b/configs/ls1046aqds_lpuart_defconfig
@@ -25,6 +25,7 @@ CONFIG_CMD_GREPENV=y
CONFIG_CMD_MEMINFO=y
CONFIG_CMD_MEMTEST=y
CONFIG_CMD_GPT=y
+CONFIG_CMD_GPIO=y
CONFIG_CMD_I2C=y
CONFIG_CMD_MMC=y
CONFIG_CMD_NAND=y
diff --git a/configs/ls1046aqds_nand_defconfig b/configs/ls1046aqds_nand_defconfig
index 03be431622..9e54ed0392 100644
--- a/configs/ls1046aqds_nand_defconfig
+++ b/configs/ls1046aqds_nand_defconfig
@@ -33,6 +33,7 @@ CONFIG_CMD_GREPENV=y
CONFIG_CMD_MEMINFO=y
CONFIG_CMD_MEMTEST=y
CONFIG_CMD_GPT=y
+CONFIG_CMD_GPIO=y
CONFIG_CMD_I2C=y
CONFIG_CMD_MMC=y
CONFIG_CMD_NAND=y
diff --git a/configs/ls1046aqds_qspi_defconfig b/configs/ls1046aqds_qspi_defconfig
index deb6ac19a7..1e77ac9d3c 100644
--- a/configs/ls1046aqds_qspi_defconfig
+++ b/configs/ls1046aqds_qspi_defconfig
@@ -25,6 +25,7 @@ CONFIG_CMD_GREPENV=y
CONFIG_CMD_MEMINFO=y
CONFIG_CMD_MEMTEST=y
CONFIG_CMD_GPT=y
+CONFIG_CMD_GPIO=y
CONFIG_CMD_I2C=y
CONFIG_CMD_MMC=y
CONFIG_CMD_PCI=y
diff --git a/configs/ls1046aqds_sdcard_ifc_defconfig b/configs/ls1046aqds_sdcard_ifc_defconfig
index 4ea8142265..ffe3c6b314 100644
--- a/configs/ls1046aqds_sdcard_ifc_defconfig
+++ b/configs/ls1046aqds_sdcard_ifc_defconfig
@@ -41,6 +41,7 @@ CONFIG_CMD_GREPENV=y
CONFIG_CMD_MEMINFO=y
CONFIG_CMD_MEMTEST=y
CONFIG_CMD_GPT=y
+CONFIG_CMD_GPIO=y
CONFIG_CMD_I2C=y
CONFIG_CMD_MMC=y
CONFIG_CMD_NAND=y
diff --git a/configs/ls1046aqds_sdcard_qspi_defconfig b/configs/ls1046aqds_sdcard_qspi_defconfig
index b031fce4e1..808625197e 100644
--- a/configs/ls1046aqds_sdcard_qspi_defconfig
+++ b/configs/ls1046aqds_sdcard_qspi_defconfig
@@ -40,6 +40,7 @@ CONFIG_CMD_GREPENV=y
CONFIG_CMD_MEMINFO=y
CONFIG_CMD_MEMTEST=y
CONFIG_CMD_GPT=y
+CONFIG_CMD_GPIO=y
CONFIG_CMD_I2C=y
CONFIG_CMD_MMC=y
CONFIG_CMD_PCI=y
diff --git a/configs/ls1046aqds_tfa_SECURE_BOOT_defconfig b/configs/ls1046aqds_tfa_SECURE_BOOT_defconfig
index 49f9cb4b10..d1ce22aca2 100644
--- a/configs/ls1046aqds_tfa_SECURE_BOOT_defconfig
+++ b/configs/ls1046aqds_tfa_SECURE_BOOT_defconfig
@@ -26,6 +26,7 @@ CONFIG_CMD_GREPENV=y
CONFIG_CMD_MEMINFO=y
CONFIG_CMD_MEMTEST=y
CONFIG_CMD_GPT=y
+CONFIG_CMD_GPIO=y
CONFIG_CMD_I2C=y
CONFIG_CMD_MMC=y
CONFIG_CMD_NAND=y
diff --git a/configs/ls1046aqds_tfa_defconfig b/configs/ls1046aqds_tfa_defconfig
index 547848ffeb..95aabde52b 100644
--- a/configs/ls1046aqds_tfa_defconfig
+++ b/configs/ls1046aqds_tfa_defconfig
@@ -27,6 +27,7 @@ CONFIG_CMD_GREPENV=y
CONFIG_CMD_MEMINFO=y
CONFIG_CMD_MEMTEST=y
CONFIG_CMD_GPT=y
+CONFIG_CMD_GPIO=y
CONFIG_CMD_I2C=y
CONFIG_CMD_MMC=y
CONFIG_CMD_NAND=y
--
2.17.1
^ permalink raw reply related [flat|nested] 35+ messages in thread
* [v2 28/33] configs: ls2088ardb: enable DM_GPIO and CMD_GPIO
2020-12-08 8:58 [v2 00/33] gpio: layerscape: fix gpio bug and enable gpio Biwen Li
` (26 preceding siblings ...)
2020-12-08 8:58 ` [v2 27/33] configs: ls1046aqds: " Biwen Li
@ 2020-12-08 8:59 ` Biwen Li
2020-12-08 8:59 ` [v2 29/33] configs: ls2088aqds: enable CMD_GPIO Biwen Li
` (4 subsequent siblings)
32 siblings, 0 replies; 35+ messages in thread
From: Biwen Li @ 2020-12-08 8:59 UTC (permalink / raw)
To: u-boot
From: Biwen Li <biwen.li@nxp.com>
Enable DM_GPIO and CMD_GPIO for board ls2088ardb
Signed-off-by: Biwen Li <biwen.li@nxp.com>
---
configs/ls2088ardb_qspi_SECURE_BOOT_defconfig | 2 ++
configs/ls2088ardb_qspi_defconfig | 2 ++
configs/ls2088ardb_tfa_SECURE_BOOT_defconfig | 1 +
configs/ls2088ardb_tfa_defconfig | 1 +
4 files changed, 6 insertions(+)
diff --git a/configs/ls2088ardb_qspi_SECURE_BOOT_defconfig b/configs/ls2088ardb_qspi_SECURE_BOOT_defconfig
index 4dbdc1fcb1..7d7443e6f4 100644
--- a/configs/ls2088ardb_qspi_SECURE_BOOT_defconfig
+++ b/configs/ls2088ardb_qspi_SECURE_BOOT_defconfig
@@ -17,9 +17,11 @@ CONFIG_QSPI_BOOT=y
CONFIG_BOOTDELAY=10
# CONFIG_USE_BOOTCOMMAND is not set
CONFIG_MISC_INIT_R=y
+CONFIG_DM_GPIO=y
CONFIG_CMD_GREPENV=y
CONFIG_CMD_DM=y
CONFIG_CMD_GPT=y
+CONFIG_CMD_GPIO=y
CONFIG_CMD_I2C=y
CONFIG_CMD_MMC=y
CONFIG_CMD_USB=y
diff --git a/configs/ls2088ardb_qspi_defconfig b/configs/ls2088ardb_qspi_defconfig
index f81e2ae6de..58757f2db7 100644
--- a/configs/ls2088ardb_qspi_defconfig
+++ b/configs/ls2088ardb_qspi_defconfig
@@ -20,9 +20,11 @@ CONFIG_USE_BOOTARGS=y
CONFIG_BOOTARGS="console=ttyS1,115200 root=/dev/ram0 earlycon=uart8250,mmio,0x21c0600 ramdisk_size=0x2000000 default_hugepagesz=2m hugepagesz=2m hugepages=256"
# CONFIG_USE_BOOTCOMMAND is not set
CONFIG_MISC_INIT_R=y
+CONFIG_DM_GPIO=y
CONFIG_CMD_GREPENV=y
CONFIG_CMD_DM=y
CONFIG_CMD_GPT=y
+CONFIG_CMD_GPIO=y
CONFIG_CMD_I2C=y
CONFIG_CMD_MMC=y
CONFIG_CMD_PCI=y
diff --git a/configs/ls2088ardb_tfa_SECURE_BOOT_defconfig b/configs/ls2088ardb_tfa_SECURE_BOOT_defconfig
index ccf79c1e64..bd7b4dfdae 100644
--- a/configs/ls2088ardb_tfa_SECURE_BOOT_defconfig
+++ b/configs/ls2088ardb_tfa_SECURE_BOOT_defconfig
@@ -26,6 +26,7 @@ CONFIG_CMD_GREPENV=y
CONFIG_CMD_EEPROM=y
CONFIG_CMD_DM=y
CONFIG_CMD_GPT=y
+CONFIG_CMD_GPIO=y
CONFIG_CMD_I2C=y
CONFIG_CMD_MMC=y
CONFIG_CMD_NAND=y
diff --git a/configs/ls2088ardb_tfa_defconfig b/configs/ls2088ardb_tfa_defconfig
index 4277f9cb72..2c60c85cba 100644
--- a/configs/ls2088ardb_tfa_defconfig
+++ b/configs/ls2088ardb_tfa_defconfig
@@ -27,6 +27,7 @@ CONFIG_CMD_GREPENV=y
CONFIG_CMD_EEPROM=y
CONFIG_CMD_DM=y
CONFIG_CMD_GPT=y
+CONFIG_CMD_GPIO=y
CONFIG_CMD_I2C=y
CONFIG_CMD_MMC=y
CONFIG_CMD_NAND=y
--
2.17.1
^ permalink raw reply related [flat|nested] 35+ messages in thread
* [v2 29/33] configs: ls2088aqds: enable CMD_GPIO
2020-12-08 8:58 [v2 00/33] gpio: layerscape: fix gpio bug and enable gpio Biwen Li
` (27 preceding siblings ...)
2020-12-08 8:59 ` [v2 28/33] configs: ls2088ardb: enable DM_GPIO and CMD_GPIO Biwen Li
@ 2020-12-08 8:59 ` Biwen Li
2020-12-08 8:59 ` [v2 30/33] configs: ls1088aqds: enable DM_GPIO and CMD_GPIO Biwen Li
` (3 subsequent siblings)
32 siblings, 0 replies; 35+ messages in thread
From: Biwen Li @ 2020-12-08 8:59 UTC (permalink / raw)
To: u-boot
From: Biwen Li <biwen.li@nxp.com>
Enable CMD_GPIO for board ls2088aqds
Signed-off-by: Biwen Li <biwen.li@nxp.com>
---
configs/ls2088aqds_tfa_defconfig | 1 +
1 file changed, 1 insertion(+)
diff --git a/configs/ls2088aqds_tfa_defconfig b/configs/ls2088aqds_tfa_defconfig
index 9e6e9f63ad..f5e8cfbeb4 100644
--- a/configs/ls2088aqds_tfa_defconfig
+++ b/configs/ls2088aqds_tfa_defconfig
@@ -25,6 +25,7 @@ CONFIG_CMD_GREPENV=y
CONFIG_CMD_EEPROM=y
CONFIG_CMD_DM=y
CONFIG_CMD_GPT=y
+CONFIG_CMD_GPIO=y
CONFIG_CMD_I2C=y
CONFIG_CMD_MMC=y
CONFIG_CMD_NAND=y
--
2.17.1
^ permalink raw reply related [flat|nested] 35+ messages in thread
* [v2 30/33] configs: ls1088aqds: enable DM_GPIO and CMD_GPIO
2020-12-08 8:58 [v2 00/33] gpio: layerscape: fix gpio bug and enable gpio Biwen Li
` (28 preceding siblings ...)
2020-12-08 8:59 ` [v2 29/33] configs: ls2088aqds: enable CMD_GPIO Biwen Li
@ 2020-12-08 8:59 ` Biwen Li
2020-12-08 8:59 ` [v2 31/33] configs: ls1088ardb: " Biwen Li
` (2 subsequent siblings)
32 siblings, 0 replies; 35+ messages in thread
From: Biwen Li @ 2020-12-08 8:59 UTC (permalink / raw)
To: u-boot
From: Biwen Li <biwen.li@nxp.com>
Enable DM_GPIO and CMD_GPIO for board ls1088aqds
Signed-off-by: Biwen Li <biwen.li@nxp.com>
---
configs/ls1088aqds_defconfig | 2 ++
configs/ls1088aqds_qspi_SECURE_BOOT_defconfig | 2 ++
configs/ls1088aqds_qspi_defconfig | 2 ++
configs/ls1088aqds_sdcard_ifc_defconfig | 2 ++
configs/ls1088aqds_sdcard_qspi_defconfig | 2 ++
configs/ls1088aqds_tfa_defconfig | 1 +
6 files changed, 11 insertions(+)
diff --git a/configs/ls1088aqds_defconfig b/configs/ls1088aqds_defconfig
index e95e871445..f777fc64df 100644
--- a/configs/ls1088aqds_defconfig
+++ b/configs/ls1088aqds_defconfig
@@ -20,9 +20,11 @@ CONFIG_BOOTARGS="console=ttyS0,115200 root=/dev/ram0 earlycon=uart8250,mmio,0x21
# CONFIG_DISPLAY_BOARDINFO is not set
CONFIG_DISPLAY_BOARDINFO_LATE=y
CONFIG_HUSH_PARSER=y
+CONFIG_DM_GPIO=y
CONFIG_CMD_GREPENV=y
CONFIG_CMD_MEMINFO=y
CONFIG_CMD_MEMTEST=y
+CONFIG_CMD_GPIO=y
CONFIG_CMD_I2C=y
CONFIG_CMD_MMC=y
CONFIG_CMD_NAND=y
diff --git a/configs/ls1088aqds_qspi_SECURE_BOOT_defconfig b/configs/ls1088aqds_qspi_SECURE_BOOT_defconfig
index a053ea86a7..bd6f364bd9 100644
--- a/configs/ls1088aqds_qspi_SECURE_BOOT_defconfig
+++ b/configs/ls1088aqds_qspi_SECURE_BOOT_defconfig
@@ -22,9 +22,11 @@ CONFIG_BOOTARGS="console=ttyS0,115200 root=/dev/ram0 earlycon=uart8250,mmio,0x21
# CONFIG_USE_BOOTCOMMAND is not set
# CONFIG_DISPLAY_BOARDINFO is not set
CONFIG_DISPLAY_BOARDINFO_LATE=y
+CONFIG_DM_GPIO=y
CONFIG_CMD_GREPENV=y
CONFIG_CMD_MEMINFO=y
CONFIG_CMD_MEMTEST=y
+CONFIG_CMD_GPIO=y
CONFIG_CMD_I2C=y
CONFIG_CMD_MMC=y
CONFIG_CMD_NAND=y
diff --git a/configs/ls1088aqds_qspi_defconfig b/configs/ls1088aqds_qspi_defconfig
index 2b0d21d208..c03a9648ec 100644
--- a/configs/ls1088aqds_qspi_defconfig
+++ b/configs/ls1088aqds_qspi_defconfig
@@ -23,9 +23,11 @@ CONFIG_BOOTARGS="console=ttyS0,115200 root=/dev/ram0 earlycon=uart8250,mmio,0x21
# CONFIG_USE_BOOTCOMMAND is not set
# CONFIG_DISPLAY_BOARDINFO is not set
CONFIG_DISPLAY_BOARDINFO_LATE=y
+CONFIG_DM_GPIO=y
CONFIG_CMD_GREPENV=y
CONFIG_CMD_MEMINFO=y
CONFIG_CMD_MEMTEST=y
+CONFIG_CMD_GPIO=y
CONFIG_CMD_I2C=y
CONFIG_CMD_MMC=y
CONFIG_CMD_NAND=y
diff --git a/configs/ls1088aqds_sdcard_ifc_defconfig b/configs/ls1088aqds_sdcard_ifc_defconfig
index 725f6bb0bb..e3ef9340a9 100644
--- a/configs/ls1088aqds_sdcard_ifc_defconfig
+++ b/configs/ls1088aqds_sdcard_ifc_defconfig
@@ -31,9 +31,11 @@ CONFIG_SPL_ENV_SUPPORT=y
CONFIG_SPL_I2C_SUPPORT=y
CONFIG_SPL_MPC8XXX_INIT_DDR_SUPPORT=y
CONFIG_HUSH_PARSER=y
+CONFIG_DM_GPIO=y
CONFIG_CMD_GREPENV=y
CONFIG_CMD_MEMINFO=y
CONFIG_CMD_MEMTEST=y
+CONFIG_CMD_GPIO=y
CONFIG_CMD_I2C=y
CONFIG_CMD_MMC=y
CONFIG_CMD_NAND=y
diff --git a/configs/ls1088aqds_sdcard_qspi_defconfig b/configs/ls1088aqds_sdcard_qspi_defconfig
index e775e490b1..549e8242a5 100644
--- a/configs/ls1088aqds_sdcard_qspi_defconfig
+++ b/configs/ls1088aqds_sdcard_qspi_defconfig
@@ -33,9 +33,11 @@ CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR=0x8b0
CONFIG_SPL_ENV_SUPPORT=y
CONFIG_SPL_I2C_SUPPORT=y
CONFIG_SPL_MPC8XXX_INIT_DDR_SUPPORT=y
+CONFIG_DM_GPIO=y
CONFIG_CMD_GREPENV=y
CONFIG_CMD_MEMINFO=y
CONFIG_CMD_MEMTEST=y
+CONFIG_CMD_GPIO=y
CONFIG_CMD_I2C=y
CONFIG_CMD_MMC=y
CONFIG_CMD_NAND=y
diff --git a/configs/ls1088aqds_tfa_defconfig b/configs/ls1088aqds_tfa_defconfig
index 019d8995ed..9c65c49f3b 100644
--- a/configs/ls1088aqds_tfa_defconfig
+++ b/configs/ls1088aqds_tfa_defconfig
@@ -29,6 +29,7 @@ CONFIG_DISPLAY_BOARDINFO_LATE=y
CONFIG_CMD_GREPENV=y
CONFIG_CMD_MEMINFO=y
CONFIG_CMD_MEMTEST=y
+CONFIG_CMD_GPIO=y
CONFIG_CMD_DM=y
CONFIG_CMD_I2C=y
CONFIG_CMD_MMC=y
--
2.17.1
^ permalink raw reply related [flat|nested] 35+ messages in thread
* [v2 31/33] configs: ls1088ardb: enable DM_GPIO and CMD_GPIO
2020-12-08 8:58 [v2 00/33] gpio: layerscape: fix gpio bug and enable gpio Biwen Li
` (29 preceding siblings ...)
2020-12-08 8:59 ` [v2 30/33] configs: ls1088aqds: enable DM_GPIO and CMD_GPIO Biwen Li
@ 2020-12-08 8:59 ` Biwen Li
2020-12-08 8:59 ` [v2 32/33] configs: lx2160ardb: enable CMD_GPIO Biwen Li
2020-12-08 8:59 ` [v2 33/33] configs: lx2160aqds: " Biwen Li
32 siblings, 0 replies; 35+ messages in thread
From: Biwen Li @ 2020-12-08 8:59 UTC (permalink / raw)
To: u-boot
From: Biwen Li <biwen.li@nxp.com>
Enable DM_GPIO and CMD_GPIO for board ls1088ardb
Signed-off-by: Biwen Li <biwen.li@nxp.com>
---
configs/ls1088ardb_qspi_SECURE_BOOT_defconfig | 2 ++
configs/ls1088ardb_qspi_defconfig | 2 ++
configs/ls1088ardb_sdcard_qspi_SECURE_BOOT_defconfig | 2 ++
configs/ls1088ardb_sdcard_qspi_defconfig | 2 ++
configs/ls1088ardb_tfa_SECURE_BOOT_defconfig | 1 +
configs/ls1088ardb_tfa_defconfig | 1 +
6 files changed, 10 insertions(+)
diff --git a/configs/ls1088ardb_qspi_SECURE_BOOT_defconfig b/configs/ls1088ardb_qspi_SECURE_BOOT_defconfig
index b4fdc00aa5..2c461816bc 100644
--- a/configs/ls1088ardb_qspi_SECURE_BOOT_defconfig
+++ b/configs/ls1088ardb_qspi_SECURE_BOOT_defconfig
@@ -23,6 +23,7 @@ CONFIG_BOOTARGS="console=ttyS0,115200 root=/dev/ram0 earlycon=uart8250,mmio,0x21
# CONFIG_DISPLAY_BOARDINFO is not set
CONFIG_DISPLAY_BOARDINFO_LATE=y
CONFIG_MISC_INIT_R=y
+CONFIG_DM_GPIO=y
CONFIG_CMD_GREPENV=y
CONFIG_CMD_MEMINFO=y
CONFIG_CMD_MEMTEST=y
@@ -39,6 +40,7 @@ CONFIG_OF_CONTROL=y
CONFIG_ENV_OVERWRITE=y
CONFIG_NET_RANDOM_ETHADDR=y
CONFIG_DM=y
+CONFIG_CMD_GPIO=y
CONFIG_SCSI_AHCI=y
CONFIG_SATA_CEVA=y
CONFIG_DM_MMC=y
diff --git a/configs/ls1088ardb_qspi_defconfig b/configs/ls1088ardb_qspi_defconfig
index 40fe7c4520..f474119d59 100644
--- a/configs/ls1088ardb_qspi_defconfig
+++ b/configs/ls1088ardb_qspi_defconfig
@@ -24,6 +24,7 @@ CONFIG_BOOTARGS="console=ttyS0,115200 root=/dev/ram0 earlycon=uart8250,mmio,0x21
# CONFIG_DISPLAY_BOARDINFO is not set
CONFIG_DISPLAY_BOARDINFO_LATE=y
CONFIG_MISC_INIT_R=y
+CONFIG_DM_GPIO=y
CONFIG_CMD_GREPENV=y
CONFIG_CMD_MEMINFO=y
CONFIG_CMD_MEMTEST=y
@@ -42,6 +43,7 @@ CONFIG_ENV_IS_IN_SPI_FLASH=y
CONFIG_ENV_ADDR=0x20300000
CONFIG_NET_RANDOM_ETHADDR=y
CONFIG_DM=y
+CONFIG_CMD_GPIO=y
CONFIG_SCSI_AHCI=y
CONFIG_SATA_CEVA=y
CONFIG_DM_MMC=y
diff --git a/configs/ls1088ardb_sdcard_qspi_SECURE_BOOT_defconfig b/configs/ls1088ardb_sdcard_qspi_SECURE_BOOT_defconfig
index 9c7a85fe62..83b99e1236 100644
--- a/configs/ls1088ardb_sdcard_qspi_SECURE_BOOT_defconfig
+++ b/configs/ls1088ardb_sdcard_qspi_SECURE_BOOT_defconfig
@@ -35,6 +35,7 @@ CONFIG_SPL_HASH_SUPPORT=y
CONFIG_SPL_ENV_SUPPORT=y
CONFIG_SPL_I2C_SUPPORT=y
CONFIG_SPL_MPC8XXX_INIT_DDR_SUPPORT=y
+CONFIG_DM_GPIO=y
CONFIG_CMD_GREPENV=y
CONFIG_CMD_MEMINFO=y
CONFIG_CMD_MEMTEST=y
@@ -52,6 +53,7 @@ CONFIG_ENV_OVERWRITE=y
CONFIG_SYS_RELOC_GD_ENV_ADDR=y
CONFIG_NET_RANDOM_ETHADDR=y
CONFIG_DM=y
+CONFIG_CMD_GPIO=y
CONFIG_SPL_DM=y
CONFIG_SCSI_AHCI=y
CONFIG_FSL_ESDHC=y
diff --git a/configs/ls1088ardb_sdcard_qspi_defconfig b/configs/ls1088ardb_sdcard_qspi_defconfig
index d409ef3f94..7f49253f53 100644
--- a/configs/ls1088ardb_sdcard_qspi_defconfig
+++ b/configs/ls1088ardb_sdcard_qspi_defconfig
@@ -34,6 +34,7 @@ CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR=0x8b0
CONFIG_SPL_ENV_SUPPORT=y
CONFIG_SPL_I2C_SUPPORT=y
CONFIG_SPL_MPC8XXX_INIT_DDR_SUPPORT=y
+CONFIG_DM_GPIO=y
CONFIG_CMD_GREPENV=y
CONFIG_CMD_MEMINFO=y
CONFIG_CMD_MEMTEST=y
@@ -52,6 +53,7 @@ CONFIG_ENV_IS_IN_MMC=y
CONFIG_SYS_RELOC_GD_ENV_ADDR=y
CONFIG_NET_RANDOM_ETHADDR=y
CONFIG_DM=y
+CONFIG_CMD_GPIO=y
CONFIG_SCSI_AHCI=y
CONFIG_SATA_CEVA=y
CONFIG_DM_MMC=y
diff --git a/configs/ls1088ardb_tfa_SECURE_BOOT_defconfig b/configs/ls1088ardb_tfa_SECURE_BOOT_defconfig
index 6a07577015..095a85bb59 100644
--- a/configs/ls1088ardb_tfa_SECURE_BOOT_defconfig
+++ b/configs/ls1088ardb_tfa_SECURE_BOOT_defconfig
@@ -41,6 +41,7 @@ CONFIG_OF_CONTROL=y
CONFIG_ENV_OVERWRITE=y
CONFIG_NET_RANDOM_ETHADDR=y
CONFIG_DM=y
+CONFIG_CMD_GPIO=y
CONFIG_SCSI_AHCI=y
CONFIG_SATA_CEVA=y
CONFIG_DM_I2C=y
diff --git a/configs/ls1088ardb_tfa_defconfig b/configs/ls1088ardb_tfa_defconfig
index d9b11eba71..49a49cd6d9 100644
--- a/configs/ls1088ardb_tfa_defconfig
+++ b/configs/ls1088ardb_tfa_defconfig
@@ -46,6 +46,7 @@ CONFIG_ENV_IS_IN_SPI_FLASH=y
CONFIG_ENV_ADDR=0x20500000
CONFIG_NET_RANDOM_ETHADDR=y
CONFIG_DM=y
+CONFIG_CMD_GPIO=y
CONFIG_SCSI_AHCI=y
CONFIG_SATA_CEVA=y
CONFIG_DM_I2C=y
--
2.17.1
^ permalink raw reply related [flat|nested] 35+ messages in thread
* [v2 32/33] configs: lx2160ardb: enable CMD_GPIO
2020-12-08 8:58 [v2 00/33] gpio: layerscape: fix gpio bug and enable gpio Biwen Li
` (30 preceding siblings ...)
2020-12-08 8:59 ` [v2 31/33] configs: ls1088ardb: " Biwen Li
@ 2020-12-08 8:59 ` Biwen Li
2020-12-08 8:59 ` [v2 33/33] configs: lx2160aqds: " Biwen Li
32 siblings, 0 replies; 35+ messages in thread
From: Biwen Li @ 2020-12-08 8:59 UTC (permalink / raw)
To: u-boot
From: Biwen Li <biwen.li@nxp.com>
Enable CMD_GPIO for board lx2160ardb
Signed-off-by: Biwen Li <biwen.li@nxp.com>
---
configs/lx2160ardb_tfa_SECURE_BOOT_defconfig | 1 +
configs/lx2160ardb_tfa_defconfig | 1 +
configs/lx2160ardb_tfa_stmm_defconfig | 1 +
3 files changed, 3 insertions(+)
diff --git a/configs/lx2160ardb_tfa_SECURE_BOOT_defconfig b/configs/lx2160ardb_tfa_SECURE_BOOT_defconfig
index b2912e418b..c277c7dcf3 100644
--- a/configs/lx2160ardb_tfa_SECURE_BOOT_defconfig
+++ b/configs/lx2160ardb_tfa_SECURE_BOOT_defconfig
@@ -26,6 +26,7 @@ CONFIG_CMD_GREPENV=y
CONFIG_CMD_EEPROM=y
CONFIG_CMD_DM=y
CONFIG_CMD_GPT=y
+CONFIG_CMD_GPIO=y
CONFIG_CMD_I2C=y
CONFIG_CMD_MMC=y
CONFIG_CMD_PCI=y
diff --git a/configs/lx2160ardb_tfa_defconfig b/configs/lx2160ardb_tfa_defconfig
index 5a9e2e776e..bcb65fd3ab 100644
--- a/configs/lx2160ardb_tfa_defconfig
+++ b/configs/lx2160ardb_tfa_defconfig
@@ -28,6 +28,7 @@ CONFIG_CMD_GREPENV=y
CONFIG_CMD_EEPROM=y
CONFIG_CMD_DM=y
CONFIG_CMD_GPT=y
+CONFIG_CMD_GPIO=y
CONFIG_CMD_I2C=y
CONFIG_CMD_MMC=y
CONFIG_CMD_OPTEE_RPMB=y
diff --git a/configs/lx2160ardb_tfa_stmm_defconfig b/configs/lx2160ardb_tfa_stmm_defconfig
index 2d7b4af4b2..2a71e97a3c 100644
--- a/configs/lx2160ardb_tfa_stmm_defconfig
+++ b/configs/lx2160ardb_tfa_stmm_defconfig
@@ -29,6 +29,7 @@ CONFIG_CMD_NVEDIT_EFI=y
CONFIG_CMD_EEPROM=y
CONFIG_CMD_DM=y
CONFIG_CMD_GPT=y
+CONFIG_CMD_GPIO=y
CONFIG_CMD_I2C=y
CONFIG_CMD_MMC=y
CONFIG_CMD_PCI=y
--
2.17.1
^ permalink raw reply related [flat|nested] 35+ messages in thread
* [v2 33/33] configs: lx2160aqds: enable CMD_GPIO
2020-12-08 8:58 [v2 00/33] gpio: layerscape: fix gpio bug and enable gpio Biwen Li
` (31 preceding siblings ...)
2020-12-08 8:59 ` [v2 32/33] configs: lx2160ardb: enable CMD_GPIO Biwen Li
@ 2020-12-08 8:59 ` Biwen Li
32 siblings, 0 replies; 35+ messages in thread
From: Biwen Li @ 2020-12-08 8:59 UTC (permalink / raw)
To: u-boot
From: Biwen Li <biwen.li@nxp.com>
Enable CMD_GPIO for board lx2160aqds
Signed-off-by: Biwen Li <biwen.li@nxp.com>
---
configs/lx2160aqds_tfa_SECURE_BOOT_defconfig | 1 +
configs/lx2160aqds_tfa_defconfig | 1 +
2 files changed, 2 insertions(+)
diff --git a/configs/lx2160aqds_tfa_SECURE_BOOT_defconfig b/configs/lx2160aqds_tfa_SECURE_BOOT_defconfig
index a6a3feba93..7d6fc72269 100644
--- a/configs/lx2160aqds_tfa_SECURE_BOOT_defconfig
+++ b/configs/lx2160aqds_tfa_SECURE_BOOT_defconfig
@@ -26,6 +26,7 @@ CONFIG_CMD_GREPENV=y
CONFIG_CMD_EEPROM=y
CONFIG_CMD_DM=y
CONFIG_CMD_GPT=y
+CONFIG_CMD_GPIO=y
CONFIG_CMD_I2C=y
CONFIG_CMD_MMC=y
CONFIG_CMD_PCI=y
diff --git a/configs/lx2160aqds_tfa_defconfig b/configs/lx2160aqds_tfa_defconfig
index d96c3b129d..7c7d9d726b 100644
--- a/configs/lx2160aqds_tfa_defconfig
+++ b/configs/lx2160aqds_tfa_defconfig
@@ -28,6 +28,7 @@ CONFIG_CMD_GREPENV=y
CONFIG_CMD_EEPROM=y
CONFIG_CMD_DM=y
CONFIG_CMD_GPT=y
+CONFIG_CMD_GPIO=y
CONFIG_CMD_I2C=y
CONFIG_CMD_MMC=y
CONFIG_CMD_PCI=y
--
2.17.1
^ permalink raw reply related [flat|nested] 35+ messages in thread