* [PATCH 2/2] crypto: keembay-ocs-aes: Add support for Keem Bay OCS AES/SM4
2020-11-26 11:51 [PATCH 0/2] crypto: Add Keem Bay OCS AES/SM4 driver Daniele Alessandrelli
2020-11-26 11:51 ` [PATCH 1/2] dt-bindings: Add Keem Bay OCS AES bindings Daniele Alessandrelli
@ 2020-11-26 11:51 ` Daniele Alessandrelli
2020-12-11 10:13 ` [PATCH 0/2] crypto: Add Keem Bay OCS AES/SM4 driver Herbert Xu
2 siblings, 0 replies; 5+ messages in thread
From: Daniele Alessandrelli @ 2020-11-26 11:51 UTC (permalink / raw)
To: linux-crypto, Herbert Xu, David S. Miller
Cc: devicetree, Rob Herring, Daniele Alessandrelli, Mark Gross
From: Mike Healy <mikex.healy@intel.com>
Add support for the AES/SM4 crypto engine included in the Offload and
Crypto Subsystem (OCS) of the Intel Keem Bay SoC, thus enabling
hardware-acceleration for the following transformations:
- ecb(aes), cbc(aes), ctr(aes), cts(cbc(aes)), gcm(aes) and cbc(aes);
supported for 128-bit and 256-bit keys.
- ecb(sm4), cbc(sm4), ctr(sm4), cts(cbc(sm4)), gcm(sm4) and cbc(sm4);
supported for 128-bit keys.
The driver passes crypto manager self-tests, including the extra tests
(CRYPTO_MANAGER_EXTRA_TESTS=y).
Signed-off-by: Mike Healy <mikex.healy@intel.com>
Co-developed-by: Daniele Alessandrelli <daniele.alessandrelli@intel.com>
Signed-off-by: Daniele Alessandrelli <daniele.alessandrelli@intel.com>
Acked-by: Mark Gross <mgross@linux.intel.com>
---
MAINTAINERS | 10 +
drivers/crypto/Kconfig | 2 +
drivers/crypto/Makefile | 1 +
drivers/crypto/keembay/Kconfig | 39 +
drivers/crypto/keembay/Makefile | 5 +
drivers/crypto/keembay/keembay-ocs-aes-core.c | 1713 +++++++++++++++++
drivers/crypto/keembay/ocs-aes.c | 1489 ++++++++++++++
drivers/crypto/keembay/ocs-aes.h | 129 ++
8 files changed, 3388 insertions(+)
create mode 100644 drivers/crypto/keembay/Kconfig
create mode 100644 drivers/crypto/keembay/Makefile
create mode 100644 drivers/crypto/keembay/keembay-ocs-aes-core.c
create mode 100644 drivers/crypto/keembay/ocs-aes.c
create mode 100644 drivers/crypto/keembay/ocs-aes.h
diff --git a/MAINTAINERS b/MAINTAINERS
index 606f9d7ef19a..f5f6539ae3eb 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -8863,6 +8863,16 @@ M: Deepak Saxena <dsaxena@plexity.net>
S: Maintained
F: drivers/char/hw_random/ixp4xx-rng.c
+INTEL KEEM BAY OCS AES/SM4 CRYPTO DRIVER
+M: Daniele Alessandrelli <daniele.alessandrelli@intel.com>
+S: Maintained
+F: Documentation/devicetree/bindings/crypto/intel,keembay-ocs-aes.yaml
+F: drivers/crypto/keembay/Kconfig
+F: drivers/crypto/keembay/Makefile
+F: drivers/crypto/keembay/keembay-ocs-aes-core.c
+F: drivers/crypto/keembay/ocs-aes.c
+F: drivers/crypto/keembay/ocs-aes.h
+
INTEL MANAGEMENT ENGINE (mei)
M: Tomas Winkler <tomas.winkler@intel.com>
L: linux-kernel@vger.kernel.org
diff --git a/drivers/crypto/Kconfig b/drivers/crypto/Kconfig
index c2950127def6..e636be70b18d 100644
--- a/drivers/crypto/Kconfig
+++ b/drivers/crypto/Kconfig
@@ -881,4 +881,6 @@ config CRYPTO_DEV_SA2UL
used for crypto offload. Select this if you want to use hardware
acceleration for cryptographic algorithms on these devices.
+source "drivers/crypto/keembay/Kconfig"
+
endif # CRYPTO_HW
diff --git a/drivers/crypto/Makefile b/drivers/crypto/Makefile
index 53fc115cf459..fff9a70348e1 100644
--- a/drivers/crypto/Makefile
+++ b/drivers/crypto/Makefile
@@ -51,3 +51,4 @@ obj-$(CONFIG_CRYPTO_DEV_ARTPEC6) += axis/
obj-$(CONFIG_CRYPTO_DEV_ZYNQMP_AES) += xilinx/
obj-y += hisilicon/
obj-$(CONFIG_CRYPTO_DEV_AMLOGIC_GXL) += amlogic/
+obj-y += keembay/
diff --git a/drivers/crypto/keembay/Kconfig b/drivers/crypto/keembay/Kconfig
new file mode 100644
index 000000000000..3c16797b25b9
--- /dev/null
+++ b/drivers/crypto/keembay/Kconfig
@@ -0,0 +1,39 @@
+config CRYPTO_DEV_KEEMBAY_OCS_AES_SM4
+ tristate "Support for Intel Keem Bay OCS AES/SM4 HW acceleration"
+ depends on OF || COMPILE_TEST
+ select CRYPTO_SKCIPHER
+ select CRYPTO_AEAD
+ select CRYPTO_ENGINE
+ help
+ Support for Intel Keem Bay Offload and Crypto Subsystem (OCS) AES and
+ SM4 cihper hardware acceleration for use with Crypto API.
+
+ Provides HW acceleration for the following transformations:
+ cbc(aes), ctr(aes), ccm(aes), gcm(aes), cbc(sm4), ctr(sm4), ccm(sm4)
+ and gcm(sm4).
+
+ Optionally, support for the following transformations can also be
+ enabled: ecb(aes), cts(cbc(aes)), ecb(sm4) and cts(cbc(sm4)).
+
+config CRYPTO_DEV_KEEMBAY_OCS_AES_SM4_ECB
+ bool "Support for Intel Keem Bay OCS AES/SM4 ECB HW acceleration"
+ depends on CRYPTO_DEV_KEEMBAY_OCS_AES_SM4
+ help
+ Support for Intel Keem Bay Offload and Crypto Subsystem (OCS)
+ AES/SM4 ECB mode hardware acceleration for use with Crypto API.
+
+ Provides OCS version of ecb(aes) and ecb(sm4)
+
+ Intel does not recommend use of ECB mode with AES/SM4.
+
+config CRYPTO_DEV_KEEMBAY_OCS_AES_SM4_CTS
+ bool "Support for Intel Keem Bay OCS AES/SM4 CTS HW acceleration"
+ depends on CRYPTO_DEV_KEEMBAY_OCS_AES_SM4
+ help
+ Support for Intel Keem Bay Offload and Crypto Subsystem (OCS)
+ AES/SM4 CBC with CTS mode hardware acceleration for use with
+ Crypto API.
+
+ Provides OCS version of cts(cbc(aes)) and cts(cbc(sm4)).
+
+ Intel does not recommend use of CTS mode with AES/SM4.
diff --git a/drivers/crypto/keembay/Makefile b/drivers/crypto/keembay/Makefile
new file mode 100644
index 000000000000..f21e2c4ab3b3
--- /dev/null
+++ b/drivers/crypto/keembay/Makefile
@@ -0,0 +1,5 @@
+#
+# Makefile for Intel Keem Bay OCS Crypto API Linux drivers
+#
+obj-$(CONFIG_CRYPTO_DEV_KEEMBAY_OCS_AES_SM4) += keembay-ocs-aes.o
+keembay-ocs-aes-objs := keembay-ocs-aes-core.o ocs-aes.o
diff --git a/drivers/crypto/keembay/keembay-ocs-aes-core.c b/drivers/crypto/keembay/keembay-ocs-aes-core.c
new file mode 100644
index 000000000000..b6b25d994af3
--- /dev/null
+++ b/drivers/crypto/keembay/keembay-ocs-aes-core.c
@@ -0,0 +1,1713 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Intel Keem Bay OCS AES Crypto Driver.
+ *
+ * Copyright (C) 2018-2020 Intel Corporation
+ */
+
+#include <linux/clk.h>
+#include <linux/completion.h>
+#include <linux/crypto.h>
+#include <linux/dma-mapping.h>
+#include <linux/interrupt.h>
+#include <linux/io.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/platform_device.h>
+#include <linux/types.h>
+
+#include <crypto/aes.h>
+#include <crypto/engine.h>
+#include <crypto/gcm.h>
+#include <crypto/scatterwalk.h>
+
+#include <crypto/internal/aead.h>
+#include <crypto/internal/skcipher.h>
+
+#include "ocs-aes.h"
+
+#define KMB_OCS_PRIORITY 350
+#define DRV_NAME "keembay-ocs-aes"
+
+#define OCS_AES_MIN_KEY_SIZE 16
+#define OCS_AES_MAX_KEY_SIZE 32
+#define OCS_AES_KEYSIZE_128 16
+#define OCS_AES_KEYSIZE_192 24
+#define OCS_AES_KEYSIZE_256 32
+#define OCS_SM4_KEY_SIZE 16
+
+/**
+ * struct ocs_aes_tctx - OCS AES Transform context
+ * @engine_ctx: Engine context.
+ * @aes_dev: The OCS AES device.
+ * @key: AES/SM4 key.
+ * @key_len: The length (in bytes) of @key.
+ * @cipher: OCS cipher to use (either AES or SM4).
+ * @sw_cipher: The cipher to use as fallback.
+ * @use_fallback: Whether or not fallback cipher should be used.
+ */
+struct ocs_aes_tctx {
+ struct crypto_engine_ctx engine_ctx;
+ struct ocs_aes_dev *aes_dev;
+ u8 key[OCS_AES_KEYSIZE_256];
+ unsigned int key_len;
+ enum ocs_cipher cipher;
+ union {
+ struct crypto_sync_skcipher *sk;
+ struct crypto_aead *aead;
+ } sw_cipher;
+ bool use_fallback;
+};
+
+/**
+ * struct ocs_aes_rctx - OCS AES Request context.
+ * @instruction: Instruction to be executed (encrypt / decrypt).
+ * @mode: Mode to use (ECB, CBC, CTR, CCm, GCM, CTS)
+ * @src_nents: Number of source SG entries.
+ * @dst_nents: Number of destination SG entries.
+ * @src_dma_count: The number of DMA-mapped entries of the source SG.
+ * @dst_dma_count: The number of DMA-mapped entries of the destination SG.
+ * @in_place: Whether or not this is an in place request, i.e.,
+ * src_sg == dst_sg.
+ * @src_dll: OCS DMA linked list for input data.
+ * @dst_dll: OCS DMA linked list for output data.
+ * @last_ct_blk: Buffer to hold last cipher text block (only used in CBC
+ * mode).
+ * @cts_swap: Whether or not CTS swap must be performed.
+ * @aad_src_dll: OCS DMA linked list for input AAD data.
+ * @aad_dst_dll: OCS DMA linked list for output AAD data.
+ * @in_tag: Buffer to hold input encrypted tag (only used for
+ * CCM/GCM decrypt).
+ * @out_tag: Buffer to hold output encrypted / decrypted tag (only
+ * used for GCM encrypt / decrypt).
+ */
+struct ocs_aes_rctx {
+ /* Fields common across all modes. */
+ enum ocs_instruction instruction;
+ enum ocs_mode mode;
+ int src_nents;
+ int dst_nents;
+ int src_dma_count;
+ int dst_dma_count;
+ bool in_place;
+ struct ocs_dll_desc src_dll;
+ struct ocs_dll_desc dst_dll;
+
+ /* CBC specific */
+ u8 last_ct_blk[AES_BLOCK_SIZE];
+
+ /* CTS specific */
+ int cts_swap;
+
+ /* CCM/GCM specific */
+ struct ocs_dll_desc aad_src_dll;
+ struct ocs_dll_desc aad_dst_dll;
+ u8 in_tag[AES_BLOCK_SIZE];
+
+ /* GCM specific */
+ u8 out_tag[AES_BLOCK_SIZE];
+};
+
+/* Driver data. */
+struct ocs_aes_drv {
+ struct list_head dev_list;
+ spinlock_t lock; /* Protects dev_list. */
+};
+
+static struct ocs_aes_drv ocs_aes = {
+ .dev_list = LIST_HEAD_INIT(ocs_aes.dev_list),
+ .lock = __SPIN_LOCK_UNLOCKED(ocs_aes.lock),
+};
+
+static struct ocs_aes_dev *kmb_ocs_aes_find_dev(struct ocs_aes_tctx *tctx)
+{
+ struct ocs_aes_dev *aes_dev;
+
+ spin_lock(&ocs_aes.lock);
+
+ if (tctx->aes_dev) {
+ aes_dev = tctx->aes_dev;
+ goto exit;
+ }
+
+ /* Only a single OCS device available */
+ aes_dev = list_first_entry(&ocs_aes.dev_list, struct ocs_aes_dev, list);
+ tctx->aes_dev = aes_dev;
+
+exit:
+ spin_unlock(&ocs_aes.lock);
+
+ return aes_dev;
+}
+
+/*
+ * Ensure key is 128-bit or 256-bit for AES or 128-bit for SM4 and an actual
+ * key is being passed in.
+ *
+ * Return: 0 if key is valid, -EINVAL otherwise.
+ */
+static int check_key(const u8 *in_key, size_t key_len, enum ocs_cipher cipher)
+{
+ if (!in_key)
+ return -EINVAL;
+
+ /* For AES, only 128-byte or 256-byte keys are supported. */
+ if (cipher == OCS_AES && (key_len == OCS_AES_KEYSIZE_128 ||
+ key_len == OCS_AES_KEYSIZE_256))
+ return 0;
+
+ /* For SM4, only 128-byte keys are supported. */
+ if (cipher == OCS_SM4 && key_len == OCS_AES_KEYSIZE_128)
+ return 0;
+
+ /* Everything else is unsupported. */
+ return -EINVAL;
+}
+
+/* Save key into transformation context. */
+static int save_key(struct ocs_aes_tctx *tctx, const u8 *in_key, size_t key_len,
+ enum ocs_cipher cipher)
+{
+ int ret;
+
+ ret = check_key(in_key, key_len, cipher);
+ if (ret)
+ return ret;
+
+ memcpy(tctx->key, in_key, key_len);
+ tctx->key_len = key_len;
+ tctx->cipher = cipher;
+
+ return 0;
+}
+
+/* Set key for symmetric cypher. */
+static int kmb_ocs_sk_set_key(struct crypto_skcipher *tfm, const u8 *in_key,
+ size_t key_len, enum ocs_cipher cipher)
+{
+ struct ocs_aes_tctx *tctx = crypto_skcipher_ctx(tfm);
+
+ /* Fallback is used for AES with 192-bit key. */
+ tctx->use_fallback = (cipher == OCS_AES &&
+ key_len == OCS_AES_KEYSIZE_192);
+
+ if (!tctx->use_fallback)
+ return save_key(tctx, in_key, key_len, cipher);
+
+ crypto_sync_skcipher_clear_flags(tctx->sw_cipher.sk,
+ CRYPTO_TFM_REQ_MASK);
+ crypto_sync_skcipher_set_flags(tctx->sw_cipher.sk,
+ tfm->base.crt_flags &
+ CRYPTO_TFM_REQ_MASK);
+
+ return crypto_sync_skcipher_setkey(tctx->sw_cipher.sk, in_key, key_len);
+}
+
+/* Set key for AEAD cipher. */
+static int kmb_ocs_aead_set_key(struct crypto_aead *tfm, const u8 *in_key,
+ size_t key_len, enum ocs_cipher cipher)
+{
+ struct ocs_aes_tctx *tctx = crypto_aead_ctx(tfm);
+
+ /* Fallback is used for AES with 192-bit key. */
+ tctx->use_fallback = (cipher == OCS_AES &&
+ key_len == OCS_AES_KEYSIZE_192);
+
+ if (!tctx->use_fallback)
+ return save_key(tctx, in_key, key_len, cipher);
+
+ crypto_aead_clear_flags(tctx->sw_cipher.aead, CRYPTO_TFM_REQ_MASK);
+ crypto_aead_set_flags(tctx->sw_cipher.aead,
+ crypto_aead_get_flags(tfm) & CRYPTO_TFM_REQ_MASK);
+
+ return crypto_aead_setkey(tctx->sw_cipher.aead, in_key, key_len);
+}
+
+/* Swap two AES blocks in SG lists. */
+static void sg_swap_blocks(struct scatterlist *sgl, unsigned int nents,
+ off_t blk1_offset, off_t blk2_offset)
+{
+ u8 tmp_buf1[AES_BLOCK_SIZE], tmp_buf2[AES_BLOCK_SIZE];
+
+ /*
+ * No easy way to copy within sg list, so copy both blocks to temporary
+ * buffers first.
+ */
+ sg_pcopy_to_buffer(sgl, nents, tmp_buf1, AES_BLOCK_SIZE, blk1_offset);
+ sg_pcopy_to_buffer(sgl, nents, tmp_buf2, AES_BLOCK_SIZE, blk2_offset);
+ sg_pcopy_from_buffer(sgl, nents, tmp_buf1, AES_BLOCK_SIZE, blk2_offset);
+ sg_pcopy_from_buffer(sgl, nents, tmp_buf2, AES_BLOCK_SIZE, blk1_offset);
+}
+
+/* Initialize request context to default values. */
+static void ocs_aes_init_rctx(struct ocs_aes_rctx *rctx)
+{
+ /* Zero everything. */
+ memset(rctx, 0, sizeof(*rctx));
+
+ /* Set initial value for DMA addresses. */
+ rctx->src_dll.dma_addr = DMA_MAPPING_ERROR;
+ rctx->dst_dll.dma_addr = DMA_MAPPING_ERROR;
+ rctx->aad_src_dll.dma_addr = DMA_MAPPING_ERROR;
+ rctx->aad_dst_dll.dma_addr = DMA_MAPPING_ERROR;
+}
+
+static int kmb_ocs_sk_validate_input(struct skcipher_request *req,
+ enum ocs_mode mode)
+{
+ struct crypto_skcipher *tfm = crypto_skcipher_reqtfm(req);
+ int iv_size = crypto_skcipher_ivsize(tfm);
+
+ switch (mode) {
+ case OCS_MODE_ECB:
+ /* Ensure input length is multiple of block size */
+ if (req->cryptlen % AES_BLOCK_SIZE != 0)
+ return -EINVAL;
+
+ return 0;
+
+ case OCS_MODE_CBC:
+ /* Ensure input length is multiple of block size */
+ if (req->cryptlen % AES_BLOCK_SIZE != 0)
+ return -EINVAL;
+
+ /* Ensure IV is present and block size in length */
+ if (!req->iv || iv_size != AES_BLOCK_SIZE)
+ return -EINVAL;
+ /*
+ * NOTE: Since req->cryptlen == 0 case was already handled in
+ * kmb_ocs_sk_common(), the above two conditions also guarantee
+ * that: cryptlen >= iv_size
+ */
+ return 0;
+
+ case OCS_MODE_CTR:
+ /* Ensure IV is present and block size in length */
+ if (!req->iv || iv_size != AES_BLOCK_SIZE)
+ return -EINVAL;
+ return 0;
+
+ case OCS_MODE_CTS:
+ /* Ensure input length >= block size */
+ if (req->cryptlen < AES_BLOCK_SIZE)
+ return -EINVAL;
+
+ /* Ensure IV is present and block size in length */
+ if (!req->iv || iv_size != AES_BLOCK_SIZE)
+ return -EINVAL;
+
+ return 0;
+ default:
+ return -EINVAL;
+ }
+}
+
+/*
+ * Called by encrypt() / decrypt() skcipher functions.
+ *
+ * Use fallback if needed, otherwise initialize context and enqueue request
+ * into engine.
+ */
+static int kmb_ocs_sk_common(struct skcipher_request *req,
+ enum ocs_cipher cipher,
+ enum ocs_instruction instruction,
+ enum ocs_mode mode)
+{
+ struct crypto_skcipher *tfm = crypto_skcipher_reqtfm(req);
+ struct ocs_aes_rctx *rctx = skcipher_request_ctx(req);
+ struct ocs_aes_tctx *tctx = crypto_skcipher_ctx(tfm);
+ struct ocs_aes_dev *aes_dev;
+ int rc;
+
+ if (tctx->use_fallback) {
+ SYNC_SKCIPHER_REQUEST_ON_STACK(subreq, tctx->sw_cipher.sk);
+
+ skcipher_request_set_sync_tfm(subreq, tctx->sw_cipher.sk);
+ skcipher_request_set_callback(subreq, req->base.flags, NULL,
+ NULL);
+ skcipher_request_set_crypt(subreq, req->src, req->dst,
+ req->cryptlen, req->iv);
+
+ if (instruction == OCS_ENCRYPT)
+ rc = crypto_skcipher_encrypt(subreq);
+ else
+ rc = crypto_skcipher_decrypt(subreq);
+
+ skcipher_request_zero(subreq);
+
+ return rc;
+ }
+
+ /*
+ * If cryptlen == 0, no processing needed for ECB, CBC and CTR.
+ *
+ * For CTS continue: kmb_ocs_sk_validate_input() will return -EINVAL.
+ */
+ if (!req->cryptlen && mode != OCS_MODE_CTS)
+ return 0;
+
+ rc = kmb_ocs_sk_validate_input(req, mode);
+ if (rc)
+ return rc;
+
+ aes_dev = kmb_ocs_aes_find_dev(tctx);
+ if (!aes_dev)
+ return -ENODEV;
+
+ if (cipher != tctx->cipher)
+ return -EINVAL;
+
+ ocs_aes_init_rctx(rctx);
+ rctx->instruction = instruction;
+ rctx->mode = mode;
+
+ return crypto_transfer_skcipher_request_to_engine(aes_dev->engine, req);
+}
+
+static void cleanup_ocs_dma_linked_list(struct device *dev,
+ struct ocs_dll_desc *dll)
+{
+ if (dll->vaddr)
+ dma_free_coherent(dev, dll->size, dll->vaddr, dll->dma_addr);
+ dll->vaddr = NULL;
+ dll->size = 0;
+ dll->dma_addr = DMA_MAPPING_ERROR;
+}
+
+static void kmb_ocs_sk_dma_cleanup(struct skcipher_request *req)
+{
+ struct crypto_skcipher *tfm = crypto_skcipher_reqtfm(req);
+ struct ocs_aes_rctx *rctx = skcipher_request_ctx(req);
+ struct ocs_aes_tctx *tctx = crypto_skcipher_ctx(tfm);
+ struct device *dev = tctx->aes_dev->dev;
+
+ if (rctx->src_dma_count) {
+ dma_unmap_sg(dev, req->src, rctx->src_nents, DMA_TO_DEVICE);
+ rctx->src_dma_count = 0;
+ }
+
+ if (rctx->dst_dma_count) {
+ dma_unmap_sg(dev, req->dst, rctx->dst_nents, rctx->in_place ?
+ DMA_BIDIRECTIONAL :
+ DMA_FROM_DEVICE);
+ rctx->dst_dma_count = 0;
+ }
+
+ /* Clean up OCS DMA linked lists */
+ cleanup_ocs_dma_linked_list(dev, &rctx->src_dll);
+ cleanup_ocs_dma_linked_list(dev, &rctx->dst_dll);
+}
+
+static int kmb_ocs_sk_prepare_inplace(struct skcipher_request *req)
+{
+ struct crypto_skcipher *tfm = crypto_skcipher_reqtfm(req);
+ struct ocs_aes_rctx *rctx = skcipher_request_ctx(req);
+ struct ocs_aes_tctx *tctx = crypto_skcipher_ctx(tfm);
+ int iv_size = crypto_skcipher_ivsize(tfm);
+ int rc;
+
+ /*
+ * For CBC decrypt, save last block (iv) to last_ct_blk buffer.
+ *
+ * Note: if we are here, we already checked that cryptlen >= iv_size
+ * and iv_size == AES_BLOCK_SIZE (i.e., the size of last_ct_blk); see
+ * kmb_ocs_sk_validate_input().
+ */
+ if (rctx->mode == OCS_MODE_CBC && rctx->instruction == OCS_DECRYPT)
+ scatterwalk_map_and_copy(rctx->last_ct_blk, req->src,
+ req->cryptlen - iv_size, iv_size, 0);
+
+ /* For CTS decrypt, swap last two blocks, if needed. */
+ if (rctx->cts_swap && rctx->instruction == OCS_DECRYPT)
+ sg_swap_blocks(req->dst, rctx->dst_nents,
+ req->cryptlen - AES_BLOCK_SIZE,
+ req->cryptlen - (2 * AES_BLOCK_SIZE));
+
+ /* src and dst buffers are the same, use bidirectional DMA mapping. */
+ rctx->dst_dma_count = dma_map_sg(tctx->aes_dev->dev, req->dst,
+ rctx->dst_nents, DMA_BIDIRECTIONAL);
+ if (rctx->dst_dma_count == 0) {
+ dev_err(tctx->aes_dev->dev, "Failed to map destination sg\n");
+ return -ENOMEM;
+ }
+
+ /* Create DST linked list */
+ rc = ocs_create_linked_list_from_sg(tctx->aes_dev, req->dst,
+ rctx->dst_dma_count, &rctx->dst_dll,
+ req->cryptlen, 0);
+ if (rc)
+ return rc;
+ /*
+ * If descriptor creation was successful, set the src_dll.dma_addr to
+ * the value of dst_dll.dma_addr, as we do in-place AES operation on
+ * the src.
+ */
+ rctx->src_dll.dma_addr = rctx->dst_dll.dma_addr;
+
+ return 0;
+}
+
+static int kmb_ocs_sk_prepare_notinplace(struct skcipher_request *req)
+{
+ struct crypto_skcipher *tfm = crypto_skcipher_reqtfm(req);
+ struct ocs_aes_rctx *rctx = skcipher_request_ctx(req);
+ struct ocs_aes_tctx *tctx = crypto_skcipher_ctx(tfm);
+ int rc;
+
+ rctx->src_nents = sg_nents_for_len(req->src, req->cryptlen);
+ if (rctx->src_nents < 0)
+ return -EBADMSG;
+
+ /* Map SRC SG. */
+ rctx->src_dma_count = dma_map_sg(tctx->aes_dev->dev, req->src,
+ rctx->src_nents, DMA_TO_DEVICE);
+ if (rctx->src_dma_count == 0) {
+ dev_err(tctx->aes_dev->dev, "Failed to map source sg\n");
+ return -ENOMEM;
+ }
+
+ /* Create SRC linked list */
+ rc = ocs_create_linked_list_from_sg(tctx->aes_dev, req->src,
+ rctx->src_dma_count, &rctx->src_dll,
+ req->cryptlen, 0);
+ if (rc)
+ return rc;
+
+ /* Map DST SG. */
+ rctx->dst_dma_count = dma_map_sg(tctx->aes_dev->dev, req->dst,
+ rctx->dst_nents, DMA_FROM_DEVICE);
+ if (rctx->dst_dma_count == 0) {
+ dev_err(tctx->aes_dev->dev, "Failed to map destination sg\n");
+ return -ENOMEM;
+ }
+
+ /* Create DST linked list */
+ rc = ocs_create_linked_list_from_sg(tctx->aes_dev, req->dst,
+ rctx->dst_dma_count, &rctx->dst_dll,
+ req->cryptlen, 0);
+ if (rc)
+ return rc;
+
+ /* If this is not a CTS decrypt operation with swapping, we are done. */
+ if (!(rctx->cts_swap && rctx->instruction == OCS_DECRYPT))
+ return 0;
+
+ /*
+ * Otherwise, we have to copy src to dst (as we cannot modify src).
+ * Use OCS AES bypass mode to copy src to dst via DMA.
+ *
+ * NOTE: for anything other than small data sizes this is rather
+ * inefficient.
+ */
+ rc = ocs_aes_bypass_op(tctx->aes_dev, rctx->dst_dll.dma_addr,
+ rctx->src_dll.dma_addr, req->cryptlen);
+ if (rc)
+ return rc;
+
+ /*
+ * Now dst == src, so clean up what we did so far and use in_place
+ * logic.
+ */
+ kmb_ocs_sk_dma_cleanup(req);
+ rctx->in_place = true;
+
+ return kmb_ocs_sk_prepare_inplace(req);
+}
+
+static int kmb_ocs_sk_run(struct skcipher_request *req)
+{
+ struct crypto_skcipher *tfm = crypto_skcipher_reqtfm(req);
+ struct ocs_aes_rctx *rctx = skcipher_request_ctx(req);
+ struct ocs_aes_tctx *tctx = crypto_skcipher_ctx(tfm);
+ struct ocs_aes_dev *aes_dev = tctx->aes_dev;
+ int iv_size = crypto_skcipher_ivsize(tfm);
+ int rc;
+
+ rctx->dst_nents = sg_nents_for_len(req->dst, req->cryptlen);
+ if (rctx->dst_nents < 0)
+ return -EBADMSG;
+
+ /*
+ * If 2 blocks or greater, and multiple of block size swap last two
+ * blocks to be compatible with other crypto API CTS implementations:
+ * OCS mode uses CBC-CS2, whereas other crypto API implementations use
+ * CBC-CS3.
+ * CBC-CS2 and CBC-CS3 defined by:
+ * https://nvlpubs.nist.gov/nistpubs/Legacy/SP/nistspecialpublication800-38a-add.pdf
+ */
+ rctx->cts_swap = (rctx->mode == OCS_MODE_CTS &&
+ req->cryptlen > AES_BLOCK_SIZE &&
+ req->cryptlen % AES_BLOCK_SIZE == 0);
+
+ rctx->in_place = (req->src == req->dst);
+
+ if (rctx->in_place)
+ rc = kmb_ocs_sk_prepare_inplace(req);
+ else
+ rc = kmb_ocs_sk_prepare_notinplace(req);
+
+ if (rc)
+ goto error;
+
+ rc = ocs_aes_op(aes_dev, rctx->mode, tctx->cipher, rctx->instruction,
+ rctx->dst_dll.dma_addr, rctx->src_dll.dma_addr,
+ req->cryptlen, req->iv, iv_size);
+ if (rc)
+ goto error;
+
+ /* Clean-up DMA before further processing output. */
+ kmb_ocs_sk_dma_cleanup(req);
+
+ /* For CTS Encrypt, swap last 2 blocks, if needed. */
+ if (rctx->cts_swap && rctx->instruction == OCS_ENCRYPT) {
+ sg_swap_blocks(req->dst, rctx->dst_nents,
+ req->cryptlen - AES_BLOCK_SIZE,
+ req->cryptlen - (2 * AES_BLOCK_SIZE));
+ return 0;
+ }
+
+ /* For CBC copy IV to req->IV. */
+ if (rctx->mode == OCS_MODE_CBC) {
+ /* CBC encrypt case. */
+ if (rctx->instruction == OCS_ENCRYPT) {
+ scatterwalk_map_and_copy(req->iv, req->dst,
+ req->cryptlen - iv_size,
+ iv_size, 0);
+ return 0;
+ }
+ /* CBC decrypt case. */
+ if (rctx->in_place)
+ memcpy(req->iv, rctx->last_ct_blk, iv_size);
+ else
+ scatterwalk_map_and_copy(req->iv, req->src,
+ req->cryptlen - iv_size,
+ iv_size, 0);
+ return 0;
+ }
+ /* For all other modes there's nothing to do. */
+
+ return 0;
+
+error:
+ kmb_ocs_sk_dma_cleanup(req);
+
+ return rc;
+}
+
+static int kmb_ocs_aead_validate_input(struct aead_request *req,
+ enum ocs_instruction instruction,
+ enum ocs_mode mode)
+{
+ struct crypto_aead *tfm = crypto_aead_reqtfm(req);
+ int tag_size = crypto_aead_authsize(tfm);
+ int iv_size = crypto_aead_ivsize(tfm);
+
+ /* For decrypt crytplen == len(PT) + len(tag). */
+ if (instruction == OCS_DECRYPT && req->cryptlen < tag_size)
+ return -EINVAL;
+
+ /* IV is mandatory. */
+ if (!req->iv)
+ return -EINVAL;
+
+ switch (mode) {
+ case OCS_MODE_GCM:
+ if (iv_size != GCM_AES_IV_SIZE)
+ return -EINVAL;
+
+ return 0;
+
+ case OCS_MODE_CCM:
+ /* Ensure IV is present and block size in length */
+ if (iv_size != AES_BLOCK_SIZE)
+ return -EINVAL;
+
+ return 0;
+
+ default:
+ return -EINVAL;
+ }
+}
+
+/*
+ * Called by encrypt() / decrypt() aead functions.
+ *
+ * Use fallback if needed, otherwise initialize context and enqueue request
+ * into engine.
+ */
+static int kmb_ocs_aead_common(struct aead_request *req,
+ enum ocs_cipher cipher,
+ enum ocs_instruction instruction,
+ enum ocs_mode mode)
+{
+ struct ocs_aes_tctx *tctx = crypto_aead_ctx(crypto_aead_reqtfm(req));
+ struct ocs_aes_rctx *rctx = aead_request_ctx(req);
+ struct ocs_aes_dev *dd;
+ int rc;
+
+ if (tctx->use_fallback) {
+ struct aead_request *subreq = aead_request_ctx(req);
+
+ aead_request_set_tfm(subreq, tctx->sw_cipher.aead);
+ aead_request_set_callback(subreq, req->base.flags,
+ req->base.complete, req->base.data);
+ aead_request_set_crypt(subreq, req->src, req->dst,
+ req->cryptlen, req->iv);
+ aead_request_set_ad(subreq, req->assoclen);
+ rc = crypto_aead_setauthsize(tctx->sw_cipher.aead,
+ crypto_aead_authsize(crypto_aead_reqtfm(req)));
+ if (rc)
+ return rc;
+
+ return (instruction == OCS_ENCRYPT) ?
+ crypto_aead_encrypt(subreq) :
+ crypto_aead_decrypt(subreq);
+ }
+
+ rc = kmb_ocs_aead_validate_input(req, instruction, mode);
+ if (rc)
+ return rc;
+
+ dd = kmb_ocs_aes_find_dev(tctx);
+ if (!dd)
+ return -ENODEV;
+
+ if (cipher != tctx->cipher)
+ return -EINVAL;
+
+ ocs_aes_init_rctx(rctx);
+ rctx->instruction = instruction;
+ rctx->mode = mode;
+
+ return crypto_transfer_aead_request_to_engine(dd->engine, req);
+}
+
+static void kmb_ocs_aead_dma_cleanup(struct aead_request *req)
+{
+ struct ocs_aes_tctx *tctx = crypto_aead_ctx(crypto_aead_reqtfm(req));
+ struct ocs_aes_rctx *rctx = aead_request_ctx(req);
+ struct device *dev = tctx->aes_dev->dev;
+
+ if (rctx->src_dma_count) {
+ dma_unmap_sg(dev, req->src, rctx->src_nents, DMA_TO_DEVICE);
+ rctx->src_dma_count = 0;
+ }
+
+ if (rctx->dst_dma_count) {
+ dma_unmap_sg(dev, req->dst, rctx->dst_nents, rctx->in_place ?
+ DMA_BIDIRECTIONAL :
+ DMA_FROM_DEVICE);
+ rctx->dst_dma_count = 0;
+ }
+ /* Clean up OCS DMA linked lists */
+ cleanup_ocs_dma_linked_list(dev, &rctx->src_dll);
+ cleanup_ocs_dma_linked_list(dev, &rctx->dst_dll);
+ cleanup_ocs_dma_linked_list(dev, &rctx->aad_src_dll);
+ cleanup_ocs_dma_linked_list(dev, &rctx->aad_dst_dll);
+}
+
+/**
+ * kmb_ocs_aead_dma_prepare() - Do DMA mapping for AEAD processing.
+ * @req: The AEAD request being processed.
+ * @src_dll_size: Where to store the length of the data mapped into the
+ * src_dll OCS DMA list.
+ *
+ * Do the following:
+ * - DMA map req->src and req->dst
+ * - Initialize the following OCS DMA linked lists: rctx->src_dll,
+ * rctx->dst_dll, rctx->aad_src_dll and rxtc->aad_dst_dll.
+ *
+ * Return: 0 on success, negative error code otherwise.
+ */
+static int kmb_ocs_aead_dma_prepare(struct aead_request *req, u32 *src_dll_size)
+{
+ struct ocs_aes_tctx *tctx = crypto_aead_ctx(crypto_aead_reqtfm(req));
+ const int tag_size = crypto_aead_authsize(crypto_aead_reqtfm(req));
+ struct ocs_aes_rctx *rctx = aead_request_ctx(req);
+ u32 in_size; /* The length of the data to be mapped by src_dll. */
+ u32 out_size; /* The length of the data to be mapped by dst_dll. */
+ u32 dst_size; /* The length of the data in dst_sg. */
+ int rc;
+
+ /* Get number of entries in input data SG list. */
+ rctx->src_nents = sg_nents_for_len(req->src,
+ req->assoclen + req->cryptlen);
+ if (rctx->src_nents < 0)
+ return -EBADMSG;
+
+ if (rctx->instruction == OCS_DECRYPT) {
+ /*
+ * For decrypt:
+ * - src sg list is: AAD|CT|tag
+ * - dst sg list expects: AAD|PT
+ *
+ * in_size == len(CT); out_size == len(PT)
+ */
+
+ /* req->cryptlen includes both CT and tag. */
+ in_size = req->cryptlen - tag_size;
+
+ /* out_size = PT size == CT size */
+ out_size = in_size;
+
+ /* len(dst_sg) == len(AAD) + len(PT) */
+ dst_size = req->assoclen + out_size;
+
+ /*
+ * Copy tag from source SG list to 'in_tag' buffer.
+ *
+ * Note: this needs to be done here, before DMA mapping src_sg.
+ */
+ sg_pcopy_to_buffer(req->src, rctx->src_nents, rctx->in_tag,
+ tag_size, req->assoclen + in_size);
+
+ } else { /* OCS_ENCRYPT */
+ /*
+ * For encrypt:
+ * src sg list is: AAD|PT
+ * dst sg list expects: AAD|CT|tag
+ */
+ /* in_size == len(PT) */
+ in_size = req->cryptlen;
+
+ /*
+ * In CCM mode the OCS engine appends the tag to the ciphertext,
+ * but in GCM mode the tag must be read from the tag registers
+ * and appended manually below
+ */
+ out_size = (rctx->mode == OCS_MODE_CCM) ? in_size + tag_size :
+ in_size;
+ /* len(dst_sg) == len(AAD) + len(CT) + len(tag) */
+ dst_size = req->assoclen + in_size + tag_size;
+ }
+ *src_dll_size = in_size;
+
+ /* Get number of entries in output data SG list. */
+ rctx->dst_nents = sg_nents_for_len(req->dst, dst_size);
+ if (rctx->dst_nents < 0)
+ return -EBADMSG;
+
+ rctx->in_place = (req->src == req->dst) ? 1 : 0;
+
+ /* Map destination; use bidirectional mapping for in-place case. */
+ rctx->dst_dma_count = dma_map_sg(tctx->aes_dev->dev, req->dst,
+ rctx->dst_nents,
+ rctx->in_place ? DMA_BIDIRECTIONAL :
+ DMA_FROM_DEVICE);
+ if (rctx->dst_dma_count == 0 && rctx->dst_nents != 0) {
+ dev_err(tctx->aes_dev->dev, "Failed to map destination sg\n");
+ return -ENOMEM;
+ }
+
+ /* Create AAD DST list: maps dst[0:AAD_SIZE-1]. */
+ rc = ocs_create_linked_list_from_sg(tctx->aes_dev, req->dst,
+ rctx->dst_dma_count,
+ &rctx->aad_dst_dll, req->assoclen,
+ 0);
+ if (rc)
+ return rc;
+
+ /* Create DST list: maps dst[AAD_SIZE:out_size] */
+ rc = ocs_create_linked_list_from_sg(tctx->aes_dev, req->dst,
+ rctx->dst_dma_count, &rctx->dst_dll,
+ out_size, req->assoclen);
+ if (rc)
+ return rc;
+
+ if (rctx->in_place) {
+ /* If this is not CCM encrypt, we are done. */
+ if (!(rctx->mode == OCS_MODE_CCM &&
+ rctx->instruction == OCS_ENCRYPT)) {
+ /*
+ * SRC and DST are the same, so re-use the same DMA
+ * addresses (to avoid allocating new DMA lists
+ * identical to the dst ones).
+ */
+ rctx->src_dll.dma_addr = rctx->dst_dll.dma_addr;
+ rctx->aad_src_dll.dma_addr = rctx->aad_dst_dll.dma_addr;
+
+ return 0;
+ }
+ /*
+ * For CCM encrypt the input and output linked lists contain
+ * different amounts of data, so, we need to create different
+ * SRC and AAD SRC lists, even for the in-place case.
+ */
+ rc = ocs_create_linked_list_from_sg(tctx->aes_dev, req->dst,
+ rctx->dst_dma_count,
+ &rctx->aad_src_dll,
+ req->assoclen, 0);
+ if (rc)
+ return rc;
+ rc = ocs_create_linked_list_from_sg(tctx->aes_dev, req->dst,
+ rctx->dst_dma_count,
+ &rctx->src_dll, in_size,
+ req->assoclen);
+ if (rc)
+ return rc;
+
+ return 0;
+ }
+ /* Not in-place case. */
+
+ /* Map source SG. */
+ rctx->src_dma_count = dma_map_sg(tctx->aes_dev->dev, req->src,
+ rctx->src_nents, DMA_TO_DEVICE);
+ if (rctx->src_dma_count == 0 && rctx->src_nents != 0) {
+ dev_err(tctx->aes_dev->dev, "Failed to map source sg\n");
+ return -ENOMEM;
+ }
+
+ /* Create AAD SRC list. */
+ rc = ocs_create_linked_list_from_sg(tctx->aes_dev, req->src,
+ rctx->src_dma_count,
+ &rctx->aad_src_dll,
+ req->assoclen, 0);
+ if (rc)
+ return rc;
+
+ /* Create SRC list. */
+ rc = ocs_create_linked_list_from_sg(tctx->aes_dev, req->src,
+ rctx->src_dma_count,
+ &rctx->src_dll, in_size,
+ req->assoclen);
+ if (rc)
+ return rc;
+
+ if (req->assoclen == 0)
+ return 0;
+
+ /* Copy AAD from src sg to dst sg using OCS DMA. */
+ rc = ocs_aes_bypass_op(tctx->aes_dev, rctx->aad_dst_dll.dma_addr,
+ rctx->aad_src_dll.dma_addr, req->cryptlen);
+ if (rc)
+ dev_err(tctx->aes_dev->dev,
+ "Failed to copy source AAD to destination AAD\n");
+
+ return rc;
+}
+
+static int kmb_ocs_aead_run(struct aead_request *req)
+{
+ struct ocs_aes_tctx *tctx = crypto_aead_ctx(crypto_aead_reqtfm(req));
+ const int tag_size = crypto_aead_authsize(crypto_aead_reqtfm(req));
+ struct ocs_aes_rctx *rctx = aead_request_ctx(req);
+ u32 in_size; /* The length of the data mapped by src_dll. */
+ int rc;
+
+ rc = kmb_ocs_aead_dma_prepare(req, &in_size);
+ if (rc)
+ goto exit;
+
+ /* For CCM, we just call the OCS processing and we are done. */
+ if (rctx->mode == OCS_MODE_CCM) {
+ rc = ocs_aes_ccm_op(tctx->aes_dev, tctx->cipher,
+ rctx->instruction, rctx->dst_dll.dma_addr,
+ rctx->src_dll.dma_addr, in_size,
+ req->iv,
+ rctx->aad_src_dll.dma_addr, req->assoclen,
+ rctx->in_tag, tag_size);
+ goto exit;
+ }
+ /* GCM case; invoke OCS processing. */
+ rc = ocs_aes_gcm_op(tctx->aes_dev, tctx->cipher,
+ rctx->instruction,
+ rctx->dst_dll.dma_addr,
+ rctx->src_dll.dma_addr, in_size,
+ req->iv,
+ rctx->aad_src_dll.dma_addr, req->assoclen,
+ rctx->out_tag, tag_size);
+ if (rc)
+ goto exit;
+
+ /* For GCM decrypt, we have to compare in_tag with out_tag. */
+ if (rctx->instruction == OCS_DECRYPT) {
+ rc = memcmp(rctx->in_tag, rctx->out_tag, tag_size) ?
+ -EBADMSG : 0;
+ goto exit;
+ }
+
+ /* For GCM encrypt, we must manually copy out_tag to DST sg. */
+
+ /* Clean-up must be called before the sg_pcopy_from_buffer() below. */
+ kmb_ocs_aead_dma_cleanup(req);
+
+ /* Copy tag to destination sg after AAD and CT. */
+ sg_pcopy_from_buffer(req->dst, rctx->dst_nents, rctx->out_tag,
+ tag_size, req->assoclen + req->cryptlen);
+
+ /* Return directly as DMA cleanup already done. */
+ return 0;
+
+exit:
+ kmb_ocs_aead_dma_cleanup(req);
+
+ return rc;
+}
+
+static int kmb_ocs_aes_sk_do_one_request(struct crypto_engine *engine,
+ void *areq)
+{
+ struct skcipher_request *req =
+ container_of(areq, struct skcipher_request, base);
+ struct crypto_skcipher *tfm = crypto_skcipher_reqtfm(req);
+ struct ocs_aes_tctx *tctx = crypto_skcipher_ctx(tfm);
+ int err;
+
+ if (!tctx->aes_dev) {
+ err = -ENODEV;
+ goto exit;
+ }
+
+ err = ocs_aes_set_key(tctx->aes_dev, tctx->key_len, tctx->key,
+ tctx->cipher);
+ if (err)
+ goto exit;
+
+ err = kmb_ocs_sk_run(req);
+
+exit:
+ crypto_finalize_skcipher_request(engine, req, err);
+
+ return 0;
+}
+
+static int kmb_ocs_aes_aead_do_one_request(struct crypto_engine *engine,
+ void *areq)
+{
+ struct aead_request *req = container_of(areq,
+ struct aead_request, base);
+ struct ocs_aes_tctx *tctx = crypto_aead_ctx(crypto_aead_reqtfm(req));
+ int err;
+
+ if (!tctx->aes_dev)
+ return -ENODEV;
+
+ err = ocs_aes_set_key(tctx->aes_dev, tctx->key_len, tctx->key,
+ tctx->cipher);
+ if (err)
+ goto exit;
+
+ err = kmb_ocs_aead_run(req);
+
+exit:
+ crypto_finalize_aead_request(tctx->aes_dev->engine, req, err);
+
+ return 0;
+}
+
+static int kmb_ocs_aes_set_key(struct crypto_skcipher *tfm, const u8 *in_key,
+ unsigned int key_len)
+{
+ return kmb_ocs_sk_set_key(tfm, in_key, key_len, OCS_AES);
+}
+
+static int kmb_ocs_aes_aead_set_key(struct crypto_aead *tfm, const u8 *in_key,
+ unsigned int key_len)
+{
+ return kmb_ocs_aead_set_key(tfm, in_key, key_len, OCS_AES);
+}
+
+#ifdef CONFIG_CRYPTO_DEV_KEEMBAY_OCS_AES_SM4_ECB
+static int kmb_ocs_aes_ecb_encrypt(struct skcipher_request *req)
+{
+ return kmb_ocs_sk_common(req, OCS_AES, OCS_ENCRYPT, OCS_MODE_ECB);
+}
+
+static int kmb_ocs_aes_ecb_decrypt(struct skcipher_request *req)
+{
+ return kmb_ocs_sk_common(req, OCS_AES, OCS_DECRYPT, OCS_MODE_ECB);
+}
+#endif /* CONFIG_CRYPTO_DEV_KEEMBAY_OCS_AES_SM4_ECB */
+
+static int kmb_ocs_aes_cbc_encrypt(struct skcipher_request *req)
+{
+ return kmb_ocs_sk_common(req, OCS_AES, OCS_ENCRYPT, OCS_MODE_CBC);
+}
+
+static int kmb_ocs_aes_cbc_decrypt(struct skcipher_request *req)
+{
+ return kmb_ocs_sk_common(req, OCS_AES, OCS_DECRYPT, OCS_MODE_CBC);
+}
+
+static int kmb_ocs_aes_ctr_encrypt(struct skcipher_request *req)
+{
+ return kmb_ocs_sk_common(req, OCS_AES, OCS_ENCRYPT, OCS_MODE_CTR);
+}
+
+static int kmb_ocs_aes_ctr_decrypt(struct skcipher_request *req)
+{
+ return kmb_ocs_sk_common(req, OCS_AES, OCS_DECRYPT, OCS_MODE_CTR);
+}
+
+#ifdef CONFIG_CRYPTO_DEV_KEEMBAY_OCS_AES_SM4_CTS
+static int kmb_ocs_aes_cts_encrypt(struct skcipher_request *req)
+{
+ return kmb_ocs_sk_common(req, OCS_AES, OCS_ENCRYPT, OCS_MODE_CTS);
+}
+
+static int kmb_ocs_aes_cts_decrypt(struct skcipher_request *req)
+{
+ return kmb_ocs_sk_common(req, OCS_AES, OCS_DECRYPT, OCS_MODE_CTS);
+}
+#endif /* CONFIG_CRYPTO_DEV_KEEMBAY_OCS_AES_SM4_CTS */
+
+static int kmb_ocs_aes_gcm_encrypt(struct aead_request *req)
+{
+ return kmb_ocs_aead_common(req, OCS_AES, OCS_ENCRYPT, OCS_MODE_GCM);
+}
+
+static int kmb_ocs_aes_gcm_decrypt(struct aead_request *req)
+{
+ return kmb_ocs_aead_common(req, OCS_AES, OCS_DECRYPT, OCS_MODE_GCM);
+}
+
+static int kmb_ocs_aes_ccm_encrypt(struct aead_request *req)
+{
+ return kmb_ocs_aead_common(req, OCS_AES, OCS_ENCRYPT, OCS_MODE_CCM);
+}
+
+static int kmb_ocs_aes_ccm_decrypt(struct aead_request *req)
+{
+ return kmb_ocs_aead_common(req, OCS_AES, OCS_DECRYPT, OCS_MODE_CCM);
+}
+
+static int kmb_ocs_sm4_set_key(struct crypto_skcipher *tfm, const u8 *in_key,
+ unsigned int key_len)
+{
+ return kmb_ocs_sk_set_key(tfm, in_key, key_len, OCS_SM4);
+}
+
+static int kmb_ocs_sm4_aead_set_key(struct crypto_aead *tfm, const u8 *in_key,
+ unsigned int key_len)
+{
+ return kmb_ocs_aead_set_key(tfm, in_key, key_len, OCS_SM4);
+}
+
+#ifdef CONFIG_CRYPTO_DEV_KEEMBAY_OCS_AES_SM4_ECB
+static int kmb_ocs_sm4_ecb_encrypt(struct skcipher_request *req)
+{
+ return kmb_ocs_sk_common(req, OCS_SM4, OCS_ENCRYPT, OCS_MODE_ECB);
+}
+
+static int kmb_ocs_sm4_ecb_decrypt(struct skcipher_request *req)
+{
+ return kmb_ocs_sk_common(req, OCS_SM4, OCS_DECRYPT, OCS_MODE_ECB);
+}
+#endif /* CONFIG_CRYPTO_DEV_KEEMBAY_OCS_AES_SM4_ECB */
+
+static int kmb_ocs_sm4_cbc_encrypt(struct skcipher_request *req)
+{
+ return kmb_ocs_sk_common(req, OCS_SM4, OCS_ENCRYPT, OCS_MODE_CBC);
+}
+
+static int kmb_ocs_sm4_cbc_decrypt(struct skcipher_request *req)
+{
+ return kmb_ocs_sk_common(req, OCS_SM4, OCS_DECRYPT, OCS_MODE_CBC);
+}
+
+static int kmb_ocs_sm4_ctr_encrypt(struct skcipher_request *req)
+{
+ return kmb_ocs_sk_common(req, OCS_SM4, OCS_ENCRYPT, OCS_MODE_CTR);
+}
+
+static int kmb_ocs_sm4_ctr_decrypt(struct skcipher_request *req)
+{
+ return kmb_ocs_sk_common(req, OCS_SM4, OCS_DECRYPT, OCS_MODE_CTR);
+}
+
+#ifdef CONFIG_CRYPTO_DEV_KEEMBAY_OCS_AES_SM4_CTS
+static int kmb_ocs_sm4_cts_encrypt(struct skcipher_request *req)
+{
+ return kmb_ocs_sk_common(req, OCS_SM4, OCS_ENCRYPT, OCS_MODE_CTS);
+}
+
+static int kmb_ocs_sm4_cts_decrypt(struct skcipher_request *req)
+{
+ return kmb_ocs_sk_common(req, OCS_SM4, OCS_DECRYPT, OCS_MODE_CTS);
+}
+#endif /* CONFIG_CRYPTO_DEV_KEEMBAY_OCS_AES_SM4_CTS */
+
+static int kmb_ocs_sm4_gcm_encrypt(struct aead_request *req)
+{
+ return kmb_ocs_aead_common(req, OCS_SM4, OCS_ENCRYPT, OCS_MODE_GCM);
+}
+
+static int kmb_ocs_sm4_gcm_decrypt(struct aead_request *req)
+{
+ return kmb_ocs_aead_common(req, OCS_SM4, OCS_DECRYPT, OCS_MODE_GCM);
+}
+
+static int kmb_ocs_sm4_ccm_encrypt(struct aead_request *req)
+{
+ return kmb_ocs_aead_common(req, OCS_SM4, OCS_ENCRYPT, OCS_MODE_CCM);
+}
+
+static int kmb_ocs_sm4_ccm_decrypt(struct aead_request *req)
+{
+ return kmb_ocs_aead_common(req, OCS_SM4, OCS_DECRYPT, OCS_MODE_CCM);
+}
+
+static inline int ocs_common_init(struct ocs_aes_tctx *tctx)
+{
+ tctx->engine_ctx.op.prepare_request = NULL;
+ tctx->engine_ctx.op.do_one_request = kmb_ocs_aes_sk_do_one_request;
+ tctx->engine_ctx.op.unprepare_request = NULL;
+
+ return 0;
+}
+
+static int ocs_aes_init_tfm(struct crypto_skcipher *tfm)
+{
+ const char *alg_name = crypto_tfm_alg_name(&tfm->base);
+ struct ocs_aes_tctx *tctx = crypto_skcipher_ctx(tfm);
+ struct crypto_sync_skcipher *blk;
+
+ /* set fallback cipher in case it will be needed */
+ blk = crypto_alloc_sync_skcipher(alg_name, 0, CRYPTO_ALG_NEED_FALLBACK);
+ if (IS_ERR(blk))
+ return PTR_ERR(blk);
+
+ tctx->sw_cipher.sk = blk;
+
+ crypto_skcipher_set_reqsize(tfm, sizeof(struct ocs_aes_rctx));
+
+ return ocs_common_init(tctx);
+}
+
+static int ocs_sm4_init_tfm(struct crypto_skcipher *tfm)
+{
+ struct ocs_aes_tctx *tctx = crypto_skcipher_ctx(tfm);
+
+ crypto_skcipher_set_reqsize(tfm, sizeof(struct ocs_aes_rctx));
+
+ return ocs_common_init(tctx);
+}
+
+static inline void clear_key(struct ocs_aes_tctx *tctx)
+{
+ memzero_explicit(tctx->key, OCS_AES_KEYSIZE_256);
+
+ /* Zero key registers if set */
+ if (tctx->aes_dev)
+ ocs_aes_set_key(tctx->aes_dev, OCS_AES_KEYSIZE_256,
+ tctx->key, OCS_AES);
+}
+
+static void ocs_exit_tfm(struct crypto_skcipher *tfm)
+{
+ struct ocs_aes_tctx *tctx = crypto_skcipher_ctx(tfm);
+
+ clear_key(tctx);
+
+ if (tctx->sw_cipher.sk) {
+ crypto_free_sync_skcipher(tctx->sw_cipher.sk);
+ tctx->sw_cipher.sk = NULL;
+ }
+}
+
+static inline int ocs_common_aead_init(struct ocs_aes_tctx *tctx)
+{
+ tctx->engine_ctx.op.prepare_request = NULL;
+ tctx->engine_ctx.op.do_one_request = kmb_ocs_aes_aead_do_one_request;
+ tctx->engine_ctx.op.unprepare_request = NULL;
+
+ return 0;
+}
+
+static int ocs_aes_aead_cra_init(struct crypto_aead *tfm)
+{
+ const char *alg_name = crypto_tfm_alg_name(&tfm->base);
+ struct ocs_aes_tctx *tctx = crypto_aead_ctx(tfm);
+ struct crypto_aead *blk;
+
+ /* Set fallback cipher in case it will be needed */
+ blk = crypto_alloc_aead(alg_name, 0, CRYPTO_ALG_NEED_FALLBACK);
+ if (IS_ERR(blk))
+ return PTR_ERR(blk);
+
+ tctx->sw_cipher.aead = blk;
+
+ crypto_aead_set_reqsize(tfm,
+ max(sizeof(struct ocs_aes_rctx),
+ (sizeof(struct aead_request) +
+ crypto_aead_reqsize(tctx->sw_cipher.aead))));
+
+ return ocs_common_aead_init(tctx);
+}
+
+static int kmb_ocs_aead_ccm_setauthsize(struct crypto_aead *tfm,
+ unsigned int authsize)
+{
+ switch (authsize) {
+ case 4:
+ case 6:
+ case 8:
+ case 10:
+ case 12:
+ case 14:
+ case 16:
+ return 0;
+ default:
+ return -EINVAL;
+ }
+}
+
+static int kmb_ocs_aead_gcm_setauthsize(struct crypto_aead *tfm,
+ unsigned int authsize)
+{
+ return crypto_gcm_check_authsize(authsize);
+}
+
+static int ocs_sm4_aead_cra_init(struct crypto_aead *tfm)
+{
+ struct ocs_aes_tctx *tctx = crypto_aead_ctx(tfm);
+
+ crypto_aead_set_reqsize(tfm, sizeof(struct ocs_aes_rctx));
+
+ return ocs_common_aead_init(tctx);
+}
+
+static void ocs_aead_cra_exit(struct crypto_aead *tfm)
+{
+ struct ocs_aes_tctx *tctx = crypto_aead_ctx(tfm);
+
+ clear_key(tctx);
+
+ if (tctx->sw_cipher.aead) {
+ crypto_free_aead(tctx->sw_cipher.aead);
+ tctx->sw_cipher.aead = NULL;
+ }
+}
+
+static struct skcipher_alg algs[] = {
+#ifdef CONFIG_CRYPTO_DEV_KEEMBAY_OCS_AES_SM4_ECB
+ {
+ .base.cra_name = "ecb(aes)",
+ .base.cra_driver_name = "ecb-aes-keembay-ocs",
+ .base.cra_priority = KMB_OCS_PRIORITY,
+ .base.cra_flags = CRYPTO_ALG_ASYNC |
+ CRYPTO_ALG_KERN_DRIVER_ONLY |
+ CRYPTO_ALG_NEED_FALLBACK,
+ .base.cra_blocksize = AES_BLOCK_SIZE,
+ .base.cra_ctxsize = sizeof(struct ocs_aes_tctx),
+ .base.cra_module = THIS_MODULE,
+ .base.cra_alignmask = 0,
+
+ .min_keysize = OCS_AES_MIN_KEY_SIZE,
+ .max_keysize = OCS_AES_MAX_KEY_SIZE,
+ .setkey = kmb_ocs_aes_set_key,
+ .encrypt = kmb_ocs_aes_ecb_encrypt,
+ .decrypt = kmb_ocs_aes_ecb_decrypt,
+ .init = ocs_aes_init_tfm,
+ .exit = ocs_exit_tfm,
+ },
+#endif /* CONFIG_CRYPTO_DEV_KEEMBAY_OCS_AES_SM4_ECB */
+ {
+ .base.cra_name = "cbc(aes)",
+ .base.cra_driver_name = "cbc-aes-keembay-ocs",
+ .base.cra_priority = KMB_OCS_PRIORITY,
+ .base.cra_flags = CRYPTO_ALG_ASYNC |
+ CRYPTO_ALG_KERN_DRIVER_ONLY |
+ CRYPTO_ALG_NEED_FALLBACK,
+ .base.cra_blocksize = AES_BLOCK_SIZE,
+ .base.cra_ctxsize = sizeof(struct ocs_aes_tctx),
+ .base.cra_module = THIS_MODULE,
+ .base.cra_alignmask = 0,
+
+ .min_keysize = OCS_AES_MIN_KEY_SIZE,
+ .max_keysize = OCS_AES_MAX_KEY_SIZE,
+ .ivsize = AES_BLOCK_SIZE,
+ .setkey = kmb_ocs_aes_set_key,
+ .encrypt = kmb_ocs_aes_cbc_encrypt,
+ .decrypt = kmb_ocs_aes_cbc_decrypt,
+ .init = ocs_aes_init_tfm,
+ .exit = ocs_exit_tfm,
+ },
+ {
+ .base.cra_name = "ctr(aes)",
+ .base.cra_driver_name = "ctr-aes-keembay-ocs",
+ .base.cra_priority = KMB_OCS_PRIORITY,
+ .base.cra_flags = CRYPTO_ALG_ASYNC |
+ CRYPTO_ALG_KERN_DRIVER_ONLY |
+ CRYPTO_ALG_NEED_FALLBACK,
+ .base.cra_blocksize = 1,
+ .base.cra_ctxsize = sizeof(struct ocs_aes_tctx),
+ .base.cra_module = THIS_MODULE,
+ .base.cra_alignmask = 0,
+
+ .min_keysize = OCS_AES_MIN_KEY_SIZE,
+ .max_keysize = OCS_AES_MAX_KEY_SIZE,
+ .ivsize = AES_BLOCK_SIZE,
+ .setkey = kmb_ocs_aes_set_key,
+ .encrypt = kmb_ocs_aes_ctr_encrypt,
+ .decrypt = kmb_ocs_aes_ctr_decrypt,
+ .init = ocs_aes_init_tfm,
+ .exit = ocs_exit_tfm,
+ },
+#ifdef CONFIG_CRYPTO_DEV_KEEMBAY_OCS_AES_SM4_CTS
+ {
+ .base.cra_name = "cts(cbc(aes))",
+ .base.cra_driver_name = "cts-aes-keembay-ocs",
+ .base.cra_priority = KMB_OCS_PRIORITY,
+ .base.cra_flags = CRYPTO_ALG_ASYNC |
+ CRYPTO_ALG_KERN_DRIVER_ONLY |
+ CRYPTO_ALG_NEED_FALLBACK,
+ .base.cra_blocksize = AES_BLOCK_SIZE,
+ .base.cra_ctxsize = sizeof(struct ocs_aes_tctx),
+ .base.cra_module = THIS_MODULE,
+ .base.cra_alignmask = 0,
+
+ .min_keysize = OCS_AES_MIN_KEY_SIZE,
+ .max_keysize = OCS_AES_MAX_KEY_SIZE,
+ .ivsize = AES_BLOCK_SIZE,
+ .setkey = kmb_ocs_aes_set_key,
+ .encrypt = kmb_ocs_aes_cts_encrypt,
+ .decrypt = kmb_ocs_aes_cts_decrypt,
+ .init = ocs_aes_init_tfm,
+ .exit = ocs_exit_tfm,
+ },
+#endif /* CONFIG_CRYPTO_DEV_KEEMBAY_OCS_AES_SM4_CTS */
+#ifdef CONFIG_CRYPTO_DEV_KEEMBAY_OCS_AES_SM4_ECB
+ {
+ .base.cra_name = "ecb(sm4)",
+ .base.cra_driver_name = "ecb-sm4-keembay-ocs",
+ .base.cra_priority = KMB_OCS_PRIORITY,
+ .base.cra_flags = CRYPTO_ALG_ASYNC |
+ CRYPTO_ALG_KERN_DRIVER_ONLY,
+ .base.cra_blocksize = AES_BLOCK_SIZE,
+ .base.cra_ctxsize = sizeof(struct ocs_aes_tctx),
+ .base.cra_module = THIS_MODULE,
+ .base.cra_alignmask = 0,
+
+ .min_keysize = OCS_SM4_KEY_SIZE,
+ .max_keysize = OCS_SM4_KEY_SIZE,
+ .setkey = kmb_ocs_sm4_set_key,
+ .encrypt = kmb_ocs_sm4_ecb_encrypt,
+ .decrypt = kmb_ocs_sm4_ecb_decrypt,
+ .init = ocs_sm4_init_tfm,
+ .exit = ocs_exit_tfm,
+ },
+#endif /* CONFIG_CRYPTO_DEV_KEEMBAY_OCS_AES_SM4_ECB */
+ {
+ .base.cra_name = "cbc(sm4)",
+ .base.cra_driver_name = "cbc-sm4-keembay-ocs",
+ .base.cra_priority = KMB_OCS_PRIORITY,
+ .base.cra_flags = CRYPTO_ALG_ASYNC |
+ CRYPTO_ALG_KERN_DRIVER_ONLY,
+ .base.cra_blocksize = AES_BLOCK_SIZE,
+ .base.cra_ctxsize = sizeof(struct ocs_aes_tctx),
+ .base.cra_module = THIS_MODULE,
+ .base.cra_alignmask = 0,
+
+ .min_keysize = OCS_SM4_KEY_SIZE,
+ .max_keysize = OCS_SM4_KEY_SIZE,
+ .ivsize = AES_BLOCK_SIZE,
+ .setkey = kmb_ocs_sm4_set_key,
+ .encrypt = kmb_ocs_sm4_cbc_encrypt,
+ .decrypt = kmb_ocs_sm4_cbc_decrypt,
+ .init = ocs_sm4_init_tfm,
+ .exit = ocs_exit_tfm,
+ },
+ {
+ .base.cra_name = "ctr(sm4)",
+ .base.cra_driver_name = "ctr-sm4-keembay-ocs",
+ .base.cra_priority = KMB_OCS_PRIORITY,
+ .base.cra_flags = CRYPTO_ALG_ASYNC |
+ CRYPTO_ALG_KERN_DRIVER_ONLY,
+ .base.cra_blocksize = 1,
+ .base.cra_ctxsize = sizeof(struct ocs_aes_tctx),
+ .base.cra_module = THIS_MODULE,
+ .base.cra_alignmask = 0,
+
+ .min_keysize = OCS_SM4_KEY_SIZE,
+ .max_keysize = OCS_SM4_KEY_SIZE,
+ .ivsize = AES_BLOCK_SIZE,
+ .setkey = kmb_ocs_sm4_set_key,
+ .encrypt = kmb_ocs_sm4_ctr_encrypt,
+ .decrypt = kmb_ocs_sm4_ctr_decrypt,
+ .init = ocs_sm4_init_tfm,
+ .exit = ocs_exit_tfm,
+ },
+#ifdef CONFIG_CRYPTO_DEV_KEEMBAY_OCS_AES_SM4_CTS
+ {
+ .base.cra_name = "cts(cbc(sm4))",
+ .base.cra_driver_name = "cts-sm4-keembay-ocs",
+ .base.cra_priority = KMB_OCS_PRIORITY,
+ .base.cra_flags = CRYPTO_ALG_ASYNC |
+ CRYPTO_ALG_KERN_DRIVER_ONLY,
+ .base.cra_blocksize = AES_BLOCK_SIZE,
+ .base.cra_ctxsize = sizeof(struct ocs_aes_tctx),
+ .base.cra_module = THIS_MODULE,
+ .base.cra_alignmask = 0,
+
+ .min_keysize = OCS_SM4_KEY_SIZE,
+ .max_keysize = OCS_SM4_KEY_SIZE,
+ .ivsize = AES_BLOCK_SIZE,
+ .setkey = kmb_ocs_sm4_set_key,
+ .encrypt = kmb_ocs_sm4_cts_encrypt,
+ .decrypt = kmb_ocs_sm4_cts_decrypt,
+ .init = ocs_sm4_init_tfm,
+ .exit = ocs_exit_tfm,
+ }
+#endif /* CONFIG_CRYPTO_DEV_KEEMBAY_OCS_AES_SM4_CTS */
+};
+
+static struct aead_alg algs_aead[] = {
+ {
+ .base = {
+ .cra_name = "gcm(aes)",
+ .cra_driver_name = "gcm-aes-keembay-ocs",
+ .cra_priority = KMB_OCS_PRIORITY,
+ .cra_flags = CRYPTO_ALG_ASYNC |
+ CRYPTO_ALG_KERN_DRIVER_ONLY |
+ CRYPTO_ALG_NEED_FALLBACK,
+ .cra_blocksize = 1,
+ .cra_ctxsize = sizeof(struct ocs_aes_tctx),
+ .cra_alignmask = 0,
+ .cra_module = THIS_MODULE,
+ },
+ .init = ocs_aes_aead_cra_init,
+ .exit = ocs_aead_cra_exit,
+ .ivsize = GCM_AES_IV_SIZE,
+ .maxauthsize = AES_BLOCK_SIZE,
+ .setauthsize = kmb_ocs_aead_gcm_setauthsize,
+ .setkey = kmb_ocs_aes_aead_set_key,
+ .encrypt = kmb_ocs_aes_gcm_encrypt,
+ .decrypt = kmb_ocs_aes_gcm_decrypt,
+ },
+ {
+ .base = {
+ .cra_name = "ccm(aes)",
+ .cra_driver_name = "ccm-aes-keembay-ocs",
+ .cra_priority = KMB_OCS_PRIORITY,
+ .cra_flags = CRYPTO_ALG_ASYNC |
+ CRYPTO_ALG_KERN_DRIVER_ONLY |
+ CRYPTO_ALG_NEED_FALLBACK,
+ .cra_blocksize = 1,
+ .cra_ctxsize = sizeof(struct ocs_aes_tctx),
+ .cra_alignmask = 0,
+ .cra_module = THIS_MODULE,
+ },
+ .init = ocs_aes_aead_cra_init,
+ .exit = ocs_aead_cra_exit,
+ .ivsize = AES_BLOCK_SIZE,
+ .maxauthsize = AES_BLOCK_SIZE,
+ .setauthsize = kmb_ocs_aead_ccm_setauthsize,
+ .setkey = kmb_ocs_aes_aead_set_key,
+ .encrypt = kmb_ocs_aes_ccm_encrypt,
+ .decrypt = kmb_ocs_aes_ccm_decrypt,
+ },
+ {
+ .base = {
+ .cra_name = "gcm(sm4)",
+ .cra_driver_name = "gcm-sm4-keembay-ocs",
+ .cra_priority = KMB_OCS_PRIORITY,
+ .cra_flags = CRYPTO_ALG_ASYNC |
+ CRYPTO_ALG_KERN_DRIVER_ONLY,
+ .cra_blocksize = 1,
+ .cra_ctxsize = sizeof(struct ocs_aes_tctx),
+ .cra_alignmask = 0,
+ .cra_module = THIS_MODULE,
+ },
+ .init = ocs_sm4_aead_cra_init,
+ .exit = ocs_aead_cra_exit,
+ .ivsize = GCM_AES_IV_SIZE,
+ .maxauthsize = AES_BLOCK_SIZE,
+ .setauthsize = kmb_ocs_aead_gcm_setauthsize,
+ .setkey = kmb_ocs_sm4_aead_set_key,
+ .encrypt = kmb_ocs_sm4_gcm_encrypt,
+ .decrypt = kmb_ocs_sm4_gcm_decrypt,
+ },
+ {
+ .base = {
+ .cra_name = "ccm(sm4)",
+ .cra_driver_name = "ccm-sm4-keembay-ocs",
+ .cra_priority = KMB_OCS_PRIORITY,
+ .cra_flags = CRYPTO_ALG_ASYNC |
+ CRYPTO_ALG_KERN_DRIVER_ONLY,
+ .cra_blocksize = 1,
+ .cra_ctxsize = sizeof(struct ocs_aes_tctx),
+ .cra_alignmask = 0,
+ .cra_module = THIS_MODULE,
+ },
+ .init = ocs_sm4_aead_cra_init,
+ .exit = ocs_aead_cra_exit,
+ .ivsize = AES_BLOCK_SIZE,
+ .maxauthsize = AES_BLOCK_SIZE,
+ .setauthsize = kmb_ocs_aead_ccm_setauthsize,
+ .setkey = kmb_ocs_sm4_aead_set_key,
+ .encrypt = kmb_ocs_sm4_ccm_encrypt,
+ .decrypt = kmb_ocs_sm4_ccm_decrypt,
+ }
+};
+
+static void unregister_aes_algs(struct ocs_aes_dev *aes_dev)
+{
+ crypto_unregister_aeads(algs_aead, ARRAY_SIZE(algs_aead));
+ crypto_unregister_skciphers(algs, ARRAY_SIZE(algs));
+}
+
+static int register_aes_algs(struct ocs_aes_dev *aes_dev)
+{
+ int ret;
+
+ /*
+ * If any algorithm fails to register, all preceding algorithms that
+ * were successfully registered will be automatically unregistered.
+ */
+ ret = crypto_register_aeads(algs_aead, ARRAY_SIZE(algs_aead));
+ if (ret)
+ return ret;
+
+ ret = crypto_register_skciphers(algs, ARRAY_SIZE(algs));
+ if (ret)
+ crypto_unregister_aeads(algs_aead, ARRAY_SIZE(algs));
+
+ return ret;
+}
+
+/* Device tree driver match. */
+static const struct of_device_id kmb_ocs_aes_of_match[] = {
+ {
+ .compatible = "intel,keembay-ocs-aes",
+ },
+ {}
+};
+
+static int kmb_ocs_aes_remove(struct platform_device *pdev)
+{
+ struct ocs_aes_dev *aes_dev;
+
+ aes_dev = platform_get_drvdata(pdev);
+ if (!aes_dev)
+ return -ENODEV;
+
+ unregister_aes_algs(aes_dev);
+
+ spin_lock(&ocs_aes.lock);
+ list_del(&aes_dev->list);
+ spin_unlock(&ocs_aes.lock);
+
+ crypto_engine_exit(aes_dev->engine);
+
+ return 0;
+}
+
+static int kmb_ocs_aes_probe(struct platform_device *pdev)
+{
+ struct device *dev = &pdev->dev;
+ struct ocs_aes_dev *aes_dev;
+ struct resource *aes_mem;
+ int rc;
+
+ aes_dev = devm_kzalloc(dev, sizeof(*aes_dev), GFP_KERNEL);
+ if (!aes_dev)
+ return -ENOMEM;
+
+ aes_dev->dev = dev;
+
+ platform_set_drvdata(pdev, aes_dev);
+
+ rc = dma_set_mask_and_coherent(dev, DMA_BIT_MASK(32));
+ if (rc) {
+ dev_err(dev, "Failed to set 32 bit dma mask %d\n", rc);
+ return rc;
+ }
+
+ /* Get base register address. */
+ aes_mem = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ if (!aes_mem) {
+ dev_err(dev, "Could not retrieve io mem resource\n");
+ return -ENODEV;
+ }
+
+ aes_dev->base_reg = devm_ioremap_resource(&pdev->dev, aes_mem);
+ if (IS_ERR(aes_dev->base_reg)) {
+ dev_err(dev, "Failed to get base address\n");
+ return PTR_ERR(aes_dev->base_reg);
+ }
+
+ /* Get and request IRQ */
+ aes_dev->irq = platform_get_irq(pdev, 0);
+ if (aes_dev->irq < 0)
+ return aes_dev->irq;
+
+ rc = devm_request_threaded_irq(dev, aes_dev->irq, ocs_aes_irq_handler,
+ NULL, 0, "keembay-ocs-aes", aes_dev);
+ if (rc < 0) {
+ dev_err(dev, "Could not request IRQ\n");
+ return rc;
+ }
+
+ INIT_LIST_HEAD(&aes_dev->list);
+ spin_lock(&ocs_aes.lock);
+ list_add_tail(&aes_dev->list, &ocs_aes.dev_list);
+ spin_unlock(&ocs_aes.lock);
+
+ init_completion(&aes_dev->irq_completion);
+
+ /* Initialize crypto engine */
+ aes_dev->engine = crypto_engine_alloc_init(dev, true);
+ if (!aes_dev->engine)
+ goto list_del;
+
+ rc = crypto_engine_start(aes_dev->engine);
+ if (rc) {
+ dev_err(dev, "Could not start crypto engine\n");
+ goto cleanup;
+ }
+
+ rc = register_aes_algs(aes_dev);
+ if (rc) {
+ dev_err(dev,
+ "Could not register OCS algorithms with Crypto API\n");
+ goto cleanup;
+ }
+
+ return 0;
+
+cleanup:
+ crypto_engine_exit(aes_dev->engine);
+list_del:
+ spin_lock(&ocs_aes.lock);
+ list_del(&aes_dev->list);
+ spin_unlock(&ocs_aes.lock);
+
+ return rc;
+}
+
+/* The OCS driver is a platform device. */
+static struct platform_driver kmb_ocs_aes_driver = {
+ .probe = kmb_ocs_aes_probe,
+ .remove = kmb_ocs_aes_remove,
+ .driver = {
+ .name = DRV_NAME,
+ .of_match_table = kmb_ocs_aes_of_match,
+ },
+};
+
+module_platform_driver(kmb_ocs_aes_driver);
+
+MODULE_DESCRIPTION("Intel Keem Bay Offload and Crypto Subsystem (OCS) AES/SM4 Driver");
+MODULE_LICENSE("GPL");
+
+MODULE_ALIAS_CRYPTO("cbc-aes-keembay-ocs");
+MODULE_ALIAS_CRYPTO("ctr-aes-keembay-ocs");
+MODULE_ALIAS_CRYPTO("gcm-aes-keembay-ocs");
+MODULE_ALIAS_CRYPTO("ccm-aes-keembay-ocs");
+
+MODULE_ALIAS_CRYPTO("cbc-sm4-keembay-ocs");
+MODULE_ALIAS_CRYPTO("ctr-sm4-keembay-ocs");
+MODULE_ALIAS_CRYPTO("gcm-sm4-keembay-ocs");
+MODULE_ALIAS_CRYPTO("ccm-sm4-keembay-ocs");
+
+#ifdef CONFIG_CRYPTO_DEV_KEEMBAY_OCS_AES_SM4_ECB
+MODULE_ALIAS_CRYPTO("ecb-aes-keembay-ocs");
+MODULE_ALIAS_CRYPTO("ecb-sm4-keembay-ocs");
+#endif /* CONFIG_CRYPTO_DEV_KEEMBAY_OCS_AES_SM4_ECB */
+
+#ifdef CONFIG_CRYPTO_DEV_KEEMBAY_OCS_AES_SM4_CTS
+MODULE_ALIAS_CRYPTO("cts-aes-keembay-ocs");
+MODULE_ALIAS_CRYPTO("cts-sm4-keembay-ocs");
+#endif /* CONFIG_CRYPTO_DEV_KEEMBAY_OCS_AES_SM4_CTS */
diff --git a/drivers/crypto/keembay/ocs-aes.c b/drivers/crypto/keembay/ocs-aes.c
new file mode 100644
index 000000000000..cc286adb1c4a
--- /dev/null
+++ b/drivers/crypto/keembay/ocs-aes.c
@@ -0,0 +1,1489 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Intel Keem Bay OCS AES Crypto Driver.
+ *
+ * Copyright (C) 2018-2020 Intel Corporation
+ */
+
+#include <linux/dma-mapping.h>
+#include <linux/interrupt.h>
+#include <linux/platform_device.h>
+#include <linux/slab.h>
+#include <linux/swab.h>
+
+#include <asm/byteorder.h>
+#include <asm/errno.h>
+
+#include <crypto/aes.h>
+#include <crypto/gcm.h>
+
+#include "ocs-aes.h"
+
+#define AES_COMMAND_OFFSET 0x0000
+#define AES_KEY_0_OFFSET 0x0004
+#define AES_KEY_1_OFFSET 0x0008
+#define AES_KEY_2_OFFSET 0x000C
+#define AES_KEY_3_OFFSET 0x0010
+#define AES_KEY_4_OFFSET 0x0014
+#define AES_KEY_5_OFFSET 0x0018
+#define AES_KEY_6_OFFSET 0x001C
+#define AES_KEY_7_OFFSET 0x0020
+#define AES_IV_0_OFFSET 0x0024
+#define AES_IV_1_OFFSET 0x0028
+#define AES_IV_2_OFFSET 0x002C
+#define AES_IV_3_OFFSET 0x0030
+#define AES_ACTIVE_OFFSET 0x0034
+#define AES_STATUS_OFFSET 0x0038
+#define AES_KEY_SIZE_OFFSET 0x0044
+#define AES_IER_OFFSET 0x0048
+#define AES_ISR_OFFSET 0x005C
+#define AES_MULTIPURPOSE1_0_OFFSET 0x0200
+#define AES_MULTIPURPOSE1_1_OFFSET 0x0204
+#define AES_MULTIPURPOSE1_2_OFFSET 0x0208
+#define AES_MULTIPURPOSE1_3_OFFSET 0x020C
+#define AES_MULTIPURPOSE2_0_OFFSET 0x0220
+#define AES_MULTIPURPOSE2_1_OFFSET 0x0224
+#define AES_MULTIPURPOSE2_2_OFFSET 0x0228
+#define AES_MULTIPURPOSE2_3_OFFSET 0x022C
+#define AES_BYTE_ORDER_CFG_OFFSET 0x02C0
+#define AES_TLEN_OFFSET 0x0300
+#define AES_T_MAC_0_OFFSET 0x0304
+#define AES_T_MAC_1_OFFSET 0x0308
+#define AES_T_MAC_2_OFFSET 0x030C
+#define AES_T_MAC_3_OFFSET 0x0310
+#define AES_PLEN_OFFSET 0x0314
+#define AES_A_DMA_SRC_ADDR_OFFSET 0x0400
+#define AES_A_DMA_DST_ADDR_OFFSET 0x0404
+#define AES_A_DMA_SRC_SIZE_OFFSET 0x0408
+#define AES_A_DMA_DST_SIZE_OFFSET 0x040C
+#define AES_A_DMA_DMA_MODE_OFFSET 0x0410
+#define AES_A_DMA_NEXT_SRC_DESCR_OFFSET 0x0418
+#define AES_A_DMA_NEXT_DST_DESCR_OFFSET 0x041C
+#define AES_A_DMA_WHILE_ACTIVE_MODE_OFFSET 0x0420
+#define AES_A_DMA_LOG_OFFSET 0x0424
+#define AES_A_DMA_STATUS_OFFSET 0x0428
+#define AES_A_DMA_PERF_CNTR_OFFSET 0x042C
+#define AES_A_DMA_MSI_ISR_OFFSET 0x0480
+#define AES_A_DMA_MSI_IER_OFFSET 0x0484
+#define AES_A_DMA_MSI_MASK_OFFSET 0x0488
+#define AES_A_DMA_INBUFFER_WRITE_FIFO_OFFSET 0x0600
+#define AES_A_DMA_OUTBUFFER_READ_FIFO_OFFSET 0x0700
+
+/*
+ * AES_A_DMA_DMA_MODE register.
+ * Default: 0x00000000.
+ * bit[31] ACTIVE
+ * This bit activates the DMA. When the DMA finishes, it resets
+ * this bit to zero.
+ * bit[30:26] Unused by this driver.
+ * bit[25] SRC_LINK_LIST_EN
+ * Source link list enable bit. When the linked list is terminated
+ * this bit is reset by the DMA.
+ * bit[24] DST_LINK_LIST_EN
+ * Destination link list enable bit. When the linked list is
+ * terminated this bit is reset by the DMA.
+ * bit[23:0] Unused by this driver.
+ */
+#define AES_A_DMA_DMA_MODE_ACTIVE BIT(31)
+#define AES_A_DMA_DMA_MODE_SRC_LINK_LIST_EN BIT(25)
+#define AES_A_DMA_DMA_MODE_DST_LINK_LIST_EN BIT(24)
+
+/*
+ * AES_ACTIVE register
+ * default 0x00000000
+ * bit[31:10] Reserved
+ * bit[9] LAST_ADATA
+ * bit[8] LAST_GCX
+ * bit[7:2] Reserved
+ * bit[1] TERMINATION
+ * bit[0] TRIGGER
+ */
+#define AES_ACTIVE_LAST_ADATA BIT(9)
+#define AES_ACTIVE_LAST_CCM_GCM BIT(8)
+#define AES_ACTIVE_TERMINATION BIT(1)
+#define AES_ACTIVE_TRIGGER BIT(0)
+
+#define AES_DISABLE_INT 0x00000000
+#define AES_DMA_CPD_ERR_INT BIT(8)
+#define AES_DMA_OUTBUF_RD_ERR_INT BIT(7)
+#define AES_DMA_OUTBUF_WR_ERR_INT BIT(6)
+#define AES_DMA_INBUF_RD_ERR_INT BIT(5)
+#define AES_DMA_INBUF_WR_ERR_INT BIT(4)
+#define AES_DMA_BAD_COMP_INT BIT(3)
+#define AES_DMA_SAI_INT BIT(2)
+#define AES_DMA_SRC_DONE_INT BIT(0)
+#define AES_COMPLETE_INT BIT(1)
+
+#define AES_DMA_MSI_MASK_CLEAR BIT(0)
+
+#define AES_128_BIT_KEY 0x00000000
+#define AES_256_BIT_KEY BIT(0)
+
+#define AES_DEACTIVATE_PERF_CNTR 0x00000000
+#define AES_ACTIVATE_PERF_CNTR BIT(0)
+
+#define AES_MAX_TAG_SIZE_U32 4
+
+#define OCS_LL_DMA_FLAG_TERMINATE BIT(31)
+
+/*
+ * There is an inconsistency in the documentation. This is documented as a
+ * 11-bit value, but it is actually 10-bits.
+ */
+#define AES_DMA_STATUS_INPUT_BUFFER_OCCUPANCY_MASK 0x3FF
+
+/*
+ * During CCM decrypt, the OCS block needs to finish processing the ciphertext
+ * before the tag is written. For 128-bit mode this required delay is 28 OCS
+ * clock cycles. For 256-bit mode it is 36 OCS clock cycles.
+ */
+#define CCM_DECRYPT_DELAY_TAG_CLK_COUNT 36UL
+
+/*
+ * During CCM decrypt there must be a delay of at least 42 OCS clock cycles
+ * between setting the TRIGGER bit in AES_ACTIVE and setting the LAST_CCM_GCM
+ * bit in the same register (as stated in the OCS databook)
+ */
+#define CCM_DECRYPT_DELAY_LAST_GCX_CLK_COUNT 42UL
+
+/* See RFC3610 section 2.2 */
+#define L_PRIME_MIN (1)
+#define L_PRIME_MAX (7)
+/*
+ * CCM IV format from RFC 3610 section 2.3
+ *
+ * Octet Number Contents
+ * ------------ ---------
+ * 0 Flags
+ * 1 ... 15-L Nonce N
+ * 16-L ... 15 Counter i
+ *
+ * Flags = L' = L - 1
+ */
+#define L_PRIME_IDX 0
+#define COUNTER_START(lprime) (16 - ((lprime) + 1))
+#define COUNTER_LEN(lprime) ((lprime) + 1)
+
+enum aes_counter_mode {
+ AES_CTR_M_NO_INC = 0,
+ AES_CTR_M_32_INC = 1,
+ AES_CTR_M_64_INC = 2,
+ AES_CTR_M_128_INC = 3,
+};
+
+/**
+ * struct ocs_dma_linked_list - OCS DMA linked list entry.
+ * @src_addr: Source address of the data.
+ * @src_len: Length of data to be fetched.
+ * @next: Next dma_list to fetch.
+ * @ll_flags: Flags (Freeze @ terminate) for the DMA engine.
+ */
+struct ocs_dma_linked_list {
+ u32 src_addr;
+ u32 src_len;
+ u32 next;
+ u32 ll_flags;
+} __packed;
+
+/*
+ * Set endianness of inputs and outputs
+ * AES_BYTE_ORDER_CFG
+ * default 0x00000000
+ * bit [10] - KEY_HI_LO_SWAP
+ * bit [9] - KEY_HI_SWAP_DWORDS_IN_OCTWORD
+ * bit [8] - KEY_HI_SWAP_BYTES_IN_DWORD
+ * bit [7] - KEY_LO_SWAP_DWORDS_IN_OCTWORD
+ * bit [6] - KEY_LO_SWAP_BYTES_IN_DWORD
+ * bit [5] - IV_SWAP_DWORDS_IN_OCTWORD
+ * bit [4] - IV_SWAP_BYTES_IN_DWORD
+ * bit [3] - DOUT_SWAP_DWORDS_IN_OCTWORD
+ * bit [2] - DOUT_SWAP_BYTES_IN_DWORD
+ * bit [1] - DOUT_SWAP_DWORDS_IN_OCTWORD
+ * bit [0] - DOUT_SWAP_BYTES_IN_DWORD
+ */
+static inline void aes_a_set_endianness(const struct ocs_aes_dev *aes_dev)
+{
+ iowrite32(0x7FF, aes_dev->base_reg + AES_BYTE_ORDER_CFG_OFFSET);
+}
+
+/* Trigger AES process start. */
+static inline void aes_a_op_trigger(const struct ocs_aes_dev *aes_dev)
+{
+ iowrite32(AES_ACTIVE_TRIGGER, aes_dev->base_reg + AES_ACTIVE_OFFSET);
+}
+
+/* Indicate last bulk of data. */
+static inline void aes_a_op_termination(const struct ocs_aes_dev *aes_dev)
+{
+ iowrite32(AES_ACTIVE_TERMINATION,
+ aes_dev->base_reg + AES_ACTIVE_OFFSET);
+}
+
+/*
+ * Set LAST_CCM_GCM in AES_ACTIVE register and clear all other bits.
+ *
+ * Called when DMA is programmed to fetch the last batch of data.
+ * - For AES-CCM it is called for the last batch of Payload data and Ciphertext
+ * data.
+ * - For AES-GCM, it is called for the last batch of Plaintext data and
+ * Ciphertext data.
+ */
+static inline void aes_a_set_last_gcx(const struct ocs_aes_dev *aes_dev)
+{
+ iowrite32(AES_ACTIVE_LAST_CCM_GCM,
+ aes_dev->base_reg + AES_ACTIVE_OFFSET);
+}
+
+/* Wait for LAST_CCM_GCM bit to be unset. */
+static inline void aes_a_wait_last_gcx(const struct ocs_aes_dev *aes_dev)
+{
+ u32 aes_active_reg;
+
+ do {
+ aes_active_reg = ioread32(aes_dev->base_reg +
+ AES_ACTIVE_OFFSET);
+ } while (aes_active_reg & AES_ACTIVE_LAST_CCM_GCM);
+}
+
+/* Wait for 10 bits of input occupancy. */
+static void aes_a_dma_wait_input_buffer_occupancy(const struct ocs_aes_dev *aes_dev)
+{
+ u32 reg;
+
+ do {
+ reg = ioread32(aes_dev->base_reg + AES_A_DMA_STATUS_OFFSET);
+ } while (reg & AES_DMA_STATUS_INPUT_BUFFER_OCCUPANCY_MASK);
+}
+
+ /*
+ * Set LAST_CCM_GCM and LAST_ADATA bits in AES_ACTIVE register (and clear all
+ * other bits).
+ *
+ * Called when DMA is programmed to fetch the last batch of Associated Data
+ * (CCM case) or Additional Authenticated Data (GCM case).
+ */
+static inline void aes_a_set_last_gcx_and_adata(const struct ocs_aes_dev *aes_dev)
+{
+ iowrite32(AES_ACTIVE_LAST_ADATA | AES_ACTIVE_LAST_CCM_GCM,
+ aes_dev->base_reg + AES_ACTIVE_OFFSET);
+}
+
+/* Set DMA src and dst transfer size to 0 */
+static inline void aes_a_dma_set_xfer_size_zero(const struct ocs_aes_dev *aes_dev)
+{
+ iowrite32(0, aes_dev->base_reg + AES_A_DMA_SRC_SIZE_OFFSET);
+ iowrite32(0, aes_dev->base_reg + AES_A_DMA_DST_SIZE_OFFSET);
+}
+
+/* Activate DMA for zero-byte transfer case. */
+static inline void aes_a_dma_active(const struct ocs_aes_dev *aes_dev)
+{
+ iowrite32(AES_A_DMA_DMA_MODE_ACTIVE,
+ aes_dev->base_reg + AES_A_DMA_DMA_MODE_OFFSET);
+}
+
+/* Activate DMA and enable src linked list */
+static inline void aes_a_dma_active_src_ll_en(const struct ocs_aes_dev *aes_dev)
+{
+ iowrite32(AES_A_DMA_DMA_MODE_ACTIVE |
+ AES_A_DMA_DMA_MODE_SRC_LINK_LIST_EN,
+ aes_dev->base_reg + AES_A_DMA_DMA_MODE_OFFSET);
+}
+
+/* Activate DMA and enable dst linked list */
+static inline void aes_a_dma_active_dst_ll_en(const struct ocs_aes_dev *aes_dev)
+{
+ iowrite32(AES_A_DMA_DMA_MODE_ACTIVE |
+ AES_A_DMA_DMA_MODE_DST_LINK_LIST_EN,
+ aes_dev->base_reg + AES_A_DMA_DMA_MODE_OFFSET);
+}
+
+/* Activate DMA and enable src and dst linked lists */
+static inline void aes_a_dma_active_src_dst_ll_en(const struct ocs_aes_dev *aes_dev)
+{
+ iowrite32(AES_A_DMA_DMA_MODE_ACTIVE |
+ AES_A_DMA_DMA_MODE_SRC_LINK_LIST_EN |
+ AES_A_DMA_DMA_MODE_DST_LINK_LIST_EN,
+ aes_dev->base_reg + AES_A_DMA_DMA_MODE_OFFSET);
+}
+
+/* Reset PERF_CNTR to 0 and activate it */
+static inline void aes_a_dma_reset_and_activate_perf_cntr(const struct ocs_aes_dev *aes_dev)
+{
+ iowrite32(0x00000000, aes_dev->base_reg + AES_A_DMA_PERF_CNTR_OFFSET);
+ iowrite32(AES_ACTIVATE_PERF_CNTR,
+ aes_dev->base_reg + AES_A_DMA_WHILE_ACTIVE_MODE_OFFSET);
+}
+
+/* Wait until PERF_CNTR is > delay, then deactivate it */
+static inline void aes_a_dma_wait_and_deactivate_perf_cntr(const struct ocs_aes_dev *aes_dev,
+ int delay)
+{
+ while (ioread32(aes_dev->base_reg + AES_A_DMA_PERF_CNTR_OFFSET) < delay)
+ ;
+ iowrite32(AES_DEACTIVATE_PERF_CNTR,
+ aes_dev->base_reg + AES_A_DMA_WHILE_ACTIVE_MODE_OFFSET);
+}
+
+/* Disable AES and DMA IRQ. */
+static void aes_irq_disable(struct ocs_aes_dev *aes_dev)
+{
+ u32 isr_val = 0;
+
+ /* Disable interrupts */
+ iowrite32(AES_DISABLE_INT,
+ aes_dev->base_reg + AES_A_DMA_MSI_IER_OFFSET);
+ iowrite32(AES_DISABLE_INT, aes_dev->base_reg + AES_IER_OFFSET);
+
+ /* Clear any pending interrupt */
+ isr_val = ioread32(aes_dev->base_reg + AES_A_DMA_MSI_ISR_OFFSET);
+ if (isr_val)
+ iowrite32(isr_val,
+ aes_dev->base_reg + AES_A_DMA_MSI_ISR_OFFSET);
+
+ isr_val = ioread32(aes_dev->base_reg + AES_A_DMA_MSI_MASK_OFFSET);
+ if (isr_val)
+ iowrite32(isr_val,
+ aes_dev->base_reg + AES_A_DMA_MSI_MASK_OFFSET);
+
+ isr_val = ioread32(aes_dev->base_reg + AES_ISR_OFFSET);
+ if (isr_val)
+ iowrite32(isr_val, aes_dev->base_reg + AES_ISR_OFFSET);
+}
+
+/* Enable AES or DMA IRQ. IRQ is disabled once fired. */
+static void aes_irq_enable(struct ocs_aes_dev *aes_dev, u8 irq)
+{
+ if (irq == AES_COMPLETE_INT) {
+ /* Ensure DMA error interrupts are enabled */
+ iowrite32(AES_DMA_CPD_ERR_INT |
+ AES_DMA_OUTBUF_RD_ERR_INT |
+ AES_DMA_OUTBUF_WR_ERR_INT |
+ AES_DMA_INBUF_RD_ERR_INT |
+ AES_DMA_INBUF_WR_ERR_INT |
+ AES_DMA_BAD_COMP_INT |
+ AES_DMA_SAI_INT,
+ aes_dev->base_reg + AES_A_DMA_MSI_IER_OFFSET);
+ /*
+ * AES_IER
+ * default 0x00000000
+ * bits [31:3] - reserved
+ * bit [2] - EN_SKS_ERR
+ * bit [1] - EN_AES_COMPLETE
+ * bit [0] - reserved
+ */
+ iowrite32(AES_COMPLETE_INT, aes_dev->base_reg + AES_IER_OFFSET);
+ return;
+ }
+ if (irq == AES_DMA_SRC_DONE_INT) {
+ /* Ensure AES interrupts are disabled */
+ iowrite32(AES_DISABLE_INT, aes_dev->base_reg + AES_IER_OFFSET);
+ /*
+ * DMA_MSI_IER
+ * default 0x00000000
+ * bits [31:9] - reserved
+ * bit [8] - CPD_ERR_INT_EN
+ * bit [7] - OUTBUF_RD_ERR_INT_EN
+ * bit [6] - OUTBUF_WR_ERR_INT_EN
+ * bit [5] - INBUF_RD_ERR_INT_EN
+ * bit [4] - INBUF_WR_ERR_INT_EN
+ * bit [3] - BAD_COMP_INT_EN
+ * bit [2] - SAI_INT_EN
+ * bit [1] - DST_DONE_INT_EN
+ * bit [0] - SRC_DONE_INT_EN
+ */
+ iowrite32(AES_DMA_CPD_ERR_INT |
+ AES_DMA_OUTBUF_RD_ERR_INT |
+ AES_DMA_OUTBUF_WR_ERR_INT |
+ AES_DMA_INBUF_RD_ERR_INT |
+ AES_DMA_INBUF_WR_ERR_INT |
+ AES_DMA_BAD_COMP_INT |
+ AES_DMA_SAI_INT |
+ AES_DMA_SRC_DONE_INT,
+ aes_dev->base_reg + AES_A_DMA_MSI_IER_OFFSET);
+ }
+}
+
+/* Enable and wait for IRQ (either from OCS AES engine or DMA) */
+static int ocs_aes_irq_enable_and_wait(struct ocs_aes_dev *aes_dev, u8 irq)
+{
+ int rc;
+
+ reinit_completion(&aes_dev->irq_completion);
+ aes_irq_enable(aes_dev, irq);
+ rc = wait_for_completion_interruptible(&aes_dev->irq_completion);
+ if (rc)
+ return rc;
+
+ return aes_dev->dma_err_mask ? -EIO : 0;
+}
+
+/* Configure DMA to OCS, linked list mode */
+static inline void dma_to_ocs_aes_ll(struct ocs_aes_dev *aes_dev,
+ dma_addr_t dma_list)
+{
+ iowrite32(0, aes_dev->base_reg + AES_A_DMA_SRC_SIZE_OFFSET);
+ iowrite32(dma_list,
+ aes_dev->base_reg + AES_A_DMA_NEXT_SRC_DESCR_OFFSET);
+}
+
+/* Configure DMA from OCS, linked list mode */
+static inline void dma_from_ocs_aes_ll(struct ocs_aes_dev *aes_dev,
+ dma_addr_t dma_list)
+{
+ iowrite32(0, aes_dev->base_reg + AES_A_DMA_DST_SIZE_OFFSET);
+ iowrite32(dma_list,
+ aes_dev->base_reg + AES_A_DMA_NEXT_DST_DESCR_OFFSET);
+}
+
+irqreturn_t ocs_aes_irq_handler(int irq, void *dev_id)
+{
+ struct ocs_aes_dev *aes_dev = dev_id;
+ u32 aes_dma_isr;
+
+ /* Read DMA ISR status. */
+ aes_dma_isr = ioread32(aes_dev->base_reg + AES_A_DMA_MSI_ISR_OFFSET);
+
+ /* Disable and clear interrupts. */
+ aes_irq_disable(aes_dev);
+
+ /* Save DMA error status. */
+ aes_dev->dma_err_mask = aes_dma_isr &
+ (AES_DMA_CPD_ERR_INT |
+ AES_DMA_OUTBUF_RD_ERR_INT |
+ AES_DMA_OUTBUF_WR_ERR_INT |
+ AES_DMA_INBUF_RD_ERR_INT |
+ AES_DMA_INBUF_WR_ERR_INT |
+ AES_DMA_BAD_COMP_INT |
+ AES_DMA_SAI_INT);
+
+ /* Signal IRQ completion. */
+ complete(&aes_dev->irq_completion);
+
+ return IRQ_HANDLED;
+}
+
+/**
+ * ocs_aes_set_key() - Write key into OCS AES hardware.
+ * @aes_dev: The OCS AES device to write the key to.
+ * @key_size: The size of the key (in bytes).
+ * @key: The key to write.
+ * @cipher: The cipher the key is for.
+ *
+ * For AES @key_size must be either 16 or 32. For SM4 @key_size must be 16.
+ *
+ * Return: 0 on success, negative error code otherwise.
+ */
+int ocs_aes_set_key(struct ocs_aes_dev *aes_dev, u32 key_size, const u8 *key,
+ enum ocs_cipher cipher)
+{
+ const u32 *key_u32;
+ u32 val;
+ int i;
+
+ /* OCS AES supports 128-bit and 256-bit keys only. */
+ if (cipher == OCS_AES && !(key_size == 32 || key_size == 16)) {
+ dev_err(aes_dev->dev,
+ "%d-bit keys not supported by AES cipher\n",
+ key_size * 8);
+ return -EINVAL;
+ }
+ /* OCS SM4 supports 128-bit keys only. */
+ if (cipher == OCS_SM4 && key_size != 16) {
+ dev_err(aes_dev->dev,
+ "%d-bit keys not supported for SM4 cipher\n",
+ key_size * 8);
+ return -EINVAL;
+ }
+
+ if (!key)
+ return -EINVAL;
+
+ key_u32 = (const u32 *)key;
+
+ /* Write key to AES_KEY[0-7] registers */
+ for (i = 0; i < (key_size / sizeof(u32)); i++) {
+ iowrite32(key_u32[i],
+ aes_dev->base_reg + AES_KEY_0_OFFSET +
+ (i * sizeof(u32)));
+ }
+ /*
+ * Write key size
+ * bits [31:1] - reserved
+ * bit [0] - AES_KEY_SIZE
+ * 0 - 128 bit key
+ * 1 - 256 bit key
+ */
+ val = (key_size == 16) ? AES_128_BIT_KEY : AES_256_BIT_KEY;
+ iowrite32(val, aes_dev->base_reg + AES_KEY_SIZE_OFFSET);
+
+ return 0;
+}
+
+/* Write AES_COMMAND */
+static inline void set_ocs_aes_command(struct ocs_aes_dev *aes_dev,
+ enum ocs_cipher cipher,
+ enum ocs_mode mode,
+ enum ocs_instruction instruction)
+{
+ u32 val;
+
+ /* AES_COMMAND
+ * default 0x000000CC
+ * bit [14] - CIPHER_SELECT
+ * 0 - AES
+ * 1 - SM4
+ * bits [11:8] - OCS_AES_MODE
+ * 0000 - ECB
+ * 0001 - CBC
+ * 0010 - CTR
+ * 0110 - CCM
+ * 0111 - GCM
+ * 1001 - CTS
+ * bits [7:6] - AES_INSTRUCTION
+ * 00 - ENCRYPT
+ * 01 - DECRYPT
+ * 10 - EXPAND
+ * 11 - BYPASS
+ * bits [3:2] - CTR_M_BITS
+ * 00 - No increment
+ * 01 - Least significant 32 bits are incremented
+ * 10 - Least significant 64 bits are incremented
+ * 11 - Full 128 bits are incremented
+ */
+ val = (cipher << 14) | (mode << 8) | (instruction << 6) |
+ (AES_CTR_M_128_INC << 2);
+ iowrite32(val, aes_dev->base_reg + AES_COMMAND_OFFSET);
+}
+
+static void ocs_aes_init(struct ocs_aes_dev *aes_dev,
+ enum ocs_mode mode,
+ enum ocs_cipher cipher,
+ enum ocs_instruction instruction)
+{
+ /* Ensure interrupts are disabled and pending interrupts cleared. */
+ aes_irq_disable(aes_dev);
+
+ /* Set endianness recommended by data-sheet. */
+ aes_a_set_endianness(aes_dev);
+
+ /* Set AES_COMMAND register. */
+ set_ocs_aes_command(aes_dev, cipher, mode, instruction);
+}
+
+/*
+ * Write the byte length of the last AES/SM4 block of Payload data (without
+ * zero padding and without the length of the MAC) in register AES_PLEN.
+ */
+static inline void ocs_aes_write_last_data_blk_len(struct ocs_aes_dev *aes_dev,
+ u32 size)
+{
+ u32 val;
+
+ if (size == 0) {
+ val = 0;
+ goto exit;
+ }
+
+ val = size % AES_BLOCK_SIZE;
+ if (val == 0)
+ val = AES_BLOCK_SIZE;
+
+exit:
+ iowrite32(val, aes_dev->base_reg + AES_PLEN_OFFSET);
+}
+
+/*
+ * Validate inputs according to mode.
+ * If OK return 0; else return -EINVAL.
+ */
+static int ocs_aes_validate_inputs(dma_addr_t src_dma_list, u32 src_size,
+ const u8 *iv, u32 iv_size,
+ dma_addr_t aad_dma_list, u32 aad_size,
+ const u8 *tag, u32 tag_size,
+ enum ocs_cipher cipher, enum ocs_mode mode,
+ enum ocs_instruction instruction,
+ dma_addr_t dst_dma_list)
+{
+ /* Ensure cipher, mode and instruction are valid. */
+ if (!(cipher == OCS_AES || cipher == OCS_SM4))
+ return -EINVAL;
+
+ if (mode != OCS_MODE_ECB && mode != OCS_MODE_CBC &&
+ mode != OCS_MODE_CTR && mode != OCS_MODE_CCM &&
+ mode != OCS_MODE_GCM && mode != OCS_MODE_CTS)
+ return -EINVAL;
+
+ if (instruction != OCS_ENCRYPT && instruction != OCS_DECRYPT &&
+ instruction != OCS_EXPAND && instruction != OCS_BYPASS)
+ return -EINVAL;
+
+ /*
+ * When instruction is OCS_BYPASS, OCS simply copies data from source
+ * to destination using DMA.
+ *
+ * AES mode is irrelevant, but both source and destination DMA
+ * linked-list must be defined.
+ */
+ if (instruction == OCS_BYPASS) {
+ if (src_dma_list == DMA_MAPPING_ERROR ||
+ dst_dma_list == DMA_MAPPING_ERROR)
+ return -EINVAL;
+
+ return 0;
+ }
+
+ /*
+ * For performance reasons switch based on mode to limit unnecessary
+ * conditionals for each mode
+ */
+ switch (mode) {
+ case OCS_MODE_ECB:
+ /* Ensure input length is multiple of block size */
+ if (src_size % AES_BLOCK_SIZE != 0)
+ return -EINVAL;
+
+ /* Ensure source and destination linked lists are created */
+ if (src_dma_list == DMA_MAPPING_ERROR ||
+ dst_dma_list == DMA_MAPPING_ERROR)
+ return -EINVAL;
+
+ return 0;
+
+ case OCS_MODE_CBC:
+ /* Ensure input length is multiple of block size */
+ if (src_size % AES_BLOCK_SIZE != 0)
+ return -EINVAL;
+
+ /* Ensure source and destination linked lists are created */
+ if (src_dma_list == DMA_MAPPING_ERROR ||
+ dst_dma_list == DMA_MAPPING_ERROR)
+ return -EINVAL;
+
+ /* Ensure IV is present and block size in length */
+ if (!iv || iv_size != AES_BLOCK_SIZE)
+ return -EINVAL;
+
+ return 0;
+
+ case OCS_MODE_CTR:
+ /* Ensure input length of 1 byte or greater */
+ if (src_size == 0)
+ return -EINVAL;
+
+ /* Ensure source and destination linked lists are created */
+ if (src_dma_list == DMA_MAPPING_ERROR ||
+ dst_dma_list == DMA_MAPPING_ERROR)
+ return -EINVAL;
+
+ /* Ensure IV is present and block size in length */
+ if (!iv || iv_size != AES_BLOCK_SIZE)
+ return -EINVAL;
+
+ return 0;
+
+ case OCS_MODE_CTS:
+ /* Ensure input length >= block size */
+ if (src_size < AES_BLOCK_SIZE)
+ return -EINVAL;
+
+ /* Ensure source and destination linked lists are created */
+ if (src_dma_list == DMA_MAPPING_ERROR ||
+ dst_dma_list == DMA_MAPPING_ERROR)
+ return -EINVAL;
+
+ /* Ensure IV is present and block size in length */
+ if (!iv || iv_size != AES_BLOCK_SIZE)
+ return -EINVAL;
+
+ return 0;
+
+ case OCS_MODE_GCM:
+ /* Ensure IV is present and GCM_AES_IV_SIZE in length */
+ if (!iv || iv_size != GCM_AES_IV_SIZE)
+ return -EINVAL;
+
+ /*
+ * If input data present ensure source and destination linked
+ * lists are created
+ */
+ if (src_size && (src_dma_list == DMA_MAPPING_ERROR ||
+ dst_dma_list == DMA_MAPPING_ERROR))
+ return -EINVAL;
+
+ /* If aad present ensure aad linked list is created */
+ if (aad_size && aad_dma_list == DMA_MAPPING_ERROR)
+ return -EINVAL;
+
+ /* Ensure tag destination is set */
+ if (!tag)
+ return -EINVAL;
+
+ /* Just ensure that tag_size doesn't cause overflows. */
+ if (tag_size > (AES_MAX_TAG_SIZE_U32 * sizeof(u32)))
+ return -EINVAL;
+
+ return 0;
+
+ case OCS_MODE_CCM:
+ /* Ensure IV is present and block size in length */
+ if (!iv || iv_size != AES_BLOCK_SIZE)
+ return -EINVAL;
+
+ /* 2 <= L <= 8, so 1 <= L' <= 7 */
+ if (iv[L_PRIME_IDX] < L_PRIME_MIN ||
+ iv[L_PRIME_IDX] > L_PRIME_MAX)
+ return -EINVAL;
+
+ /* If aad present ensure aad linked list is created */
+ if (aad_size && aad_dma_list == DMA_MAPPING_ERROR)
+ return -EINVAL;
+
+ /* Just ensure that tag_size doesn't cause overflows. */
+ if (tag_size > (AES_MAX_TAG_SIZE_U32 * sizeof(u32)))
+ return -EINVAL;
+
+ if (instruction == OCS_DECRYPT) {
+ /*
+ * If input data present ensure source and destination
+ * linked lists are created
+ */
+ if (src_size && (src_dma_list == DMA_MAPPING_ERROR ||
+ dst_dma_list == DMA_MAPPING_ERROR))
+ return -EINVAL;
+
+ /* Ensure input tag is present */
+ if (!tag)
+ return -EINVAL;
+
+ return 0;
+ }
+
+ /* Instruction == OCS_ENCRYPT */
+
+ /*
+ * Destination linked list always required (for tag even if no
+ * input data)
+ */
+ if (dst_dma_list == DMA_MAPPING_ERROR)
+ return -EINVAL;
+
+ /* If input data present ensure src linked list is created */
+ if (src_size && src_dma_list == DMA_MAPPING_ERROR)
+ return -EINVAL;
+
+ return 0;
+
+ default:
+ return -EINVAL;
+ }
+}
+
+/**
+ * ocs_aes_op() - Perform AES/SM4 operation.
+ * @aes_dev: The OCS AES device to use.
+ * @mode: The mode to use (ECB, CBC, CTR, or CTS).
+ * @cipher: The cipher to use (AES or SM4).
+ * @instruction: The instruction to perform (encrypt or decrypt).
+ * @dst_dma_list: The OCS DMA list mapping output memory.
+ * @src_dma_list: The OCS DMA list mapping input payload data.
+ * @src_size: The amount of data mapped by @src_dma_list.
+ * @iv: The IV vector.
+ * @iv_size: The size (in bytes) of @iv.
+ *
+ * Return: 0 on success, negative error code otherwise.
+ */
+int ocs_aes_op(struct ocs_aes_dev *aes_dev,
+ enum ocs_mode mode,
+ enum ocs_cipher cipher,
+ enum ocs_instruction instruction,
+ dma_addr_t dst_dma_list,
+ dma_addr_t src_dma_list,
+ u32 src_size,
+ u8 *iv,
+ u32 iv_size)
+{
+ u32 *iv32;
+ int rc;
+
+ rc = ocs_aes_validate_inputs(src_dma_list, src_size, iv, iv_size, 0, 0,
+ NULL, 0, cipher, mode, instruction,
+ dst_dma_list);
+ if (rc)
+ return rc;
+ /*
+ * ocs_aes_validate_inputs() is a generic check, now ensure mode is not
+ * GCM or CCM.
+ */
+ if (mode == OCS_MODE_GCM || mode == OCS_MODE_CCM)
+ return -EINVAL;
+
+ /* Cast IV to u32 array. */
+ iv32 = (u32 *)iv;
+
+ ocs_aes_init(aes_dev, mode, cipher, instruction);
+
+ if (mode == OCS_MODE_CTS) {
+ /* Write the byte length of the last data block to engine. */
+ ocs_aes_write_last_data_blk_len(aes_dev, src_size);
+ }
+
+ /* ECB is the only mode that doesn't use IV. */
+ if (mode != OCS_MODE_ECB) {
+ iowrite32(iv32[0], aes_dev->base_reg + AES_IV_0_OFFSET);
+ iowrite32(iv32[1], aes_dev->base_reg + AES_IV_1_OFFSET);
+ iowrite32(iv32[2], aes_dev->base_reg + AES_IV_2_OFFSET);
+ iowrite32(iv32[3], aes_dev->base_reg + AES_IV_3_OFFSET);
+ }
+
+ /* Set AES_ACTIVE.TRIGGER to start the operation. */
+ aes_a_op_trigger(aes_dev);
+
+ /* Configure and activate input / output DMA. */
+ dma_to_ocs_aes_ll(aes_dev, src_dma_list);
+ dma_from_ocs_aes_ll(aes_dev, dst_dma_list);
+ aes_a_dma_active_src_dst_ll_en(aes_dev);
+
+ if (mode == OCS_MODE_CTS) {
+ /*
+ * For CTS mode, instruct engine to activate ciphertext
+ * stealing if last block of data is incomplete.
+ */
+ aes_a_set_last_gcx(aes_dev);
+ } else {
+ /* For all other modes, just write the 'termination' bit. */
+ aes_a_op_termination(aes_dev);
+ }
+
+ /* Wait for engine to complete processing. */
+ rc = ocs_aes_irq_enable_and_wait(aes_dev, AES_COMPLETE_INT);
+ if (rc)
+ return rc;
+
+ if (mode == OCS_MODE_CTR) {
+ /* Read back IV for streaming mode */
+ iv32[0] = ioread32(aes_dev->base_reg + AES_IV_0_OFFSET);
+ iv32[1] = ioread32(aes_dev->base_reg + AES_IV_1_OFFSET);
+ iv32[2] = ioread32(aes_dev->base_reg + AES_IV_2_OFFSET);
+ iv32[3] = ioread32(aes_dev->base_reg + AES_IV_3_OFFSET);
+ }
+
+ return 0;
+}
+
+/* Compute and write J0 to engine registers. */
+static void ocs_aes_gcm_write_j0(const struct ocs_aes_dev *aes_dev,
+ const u8 *iv)
+{
+ const u32 *j0 = (u32 *)iv;
+
+ /*
+ * IV must be 12 bytes; Other sizes not supported as Linux crypto API
+ * does only expects/allows 12 byte IV for GCM
+ */
+ iowrite32(0x00000001, aes_dev->base_reg + AES_IV_0_OFFSET);
+ iowrite32(__swab32(j0[2]), aes_dev->base_reg + AES_IV_1_OFFSET);
+ iowrite32(__swab32(j0[1]), aes_dev->base_reg + AES_IV_2_OFFSET);
+ iowrite32(__swab32(j0[0]), aes_dev->base_reg + AES_IV_3_OFFSET);
+}
+
+/* Read GCM tag from engine registers. */
+static inline void ocs_aes_gcm_read_tag(struct ocs_aes_dev *aes_dev,
+ u8 *tag, u32 tag_size)
+{
+ u32 tag_u32[AES_MAX_TAG_SIZE_U32];
+
+ /*
+ * The Authentication Tag T is stored in Little Endian order in the
+ * registers with the most significant bytes stored from AES_T_MAC[3]
+ * downward.
+ */
+ tag_u32[0] = __swab32(ioread32(aes_dev->base_reg + AES_T_MAC_3_OFFSET));
+ tag_u32[1] = __swab32(ioread32(aes_dev->base_reg + AES_T_MAC_2_OFFSET));
+ tag_u32[2] = __swab32(ioread32(aes_dev->base_reg + AES_T_MAC_1_OFFSET));
+ tag_u32[3] = __swab32(ioread32(aes_dev->base_reg + AES_T_MAC_0_OFFSET));
+
+ memcpy(tag, tag_u32, tag_size);
+}
+
+/**
+ * ocs_aes_gcm_op() - Perform GCM operation.
+ * @aes_dev: The OCS AES device to use.
+ * @cipher: The Cipher to use (AES or SM4).
+ * @instruction: The instruction to perform (encrypt or decrypt).
+ * @dst_dma_list: The OCS DMA list mapping output memory.
+ * @src_dma_list: The OCS DMA list mapping input payload data.
+ * @src_size: The amount of data mapped by @src_dma_list.
+ * @iv: The input IV vector.
+ * @aad_dma_list: The OCS DMA list mapping input AAD data.
+ * @aad_size: The amount of data mapped by @aad_dma_list.
+ * @out_tag: Where to store computed tag.
+ * @tag_size: The size (in bytes) of @out_tag.
+ *
+ * Return: 0 on success, negative error code otherwise.
+ */
+int ocs_aes_gcm_op(struct ocs_aes_dev *aes_dev,
+ enum ocs_cipher cipher,
+ enum ocs_instruction instruction,
+ dma_addr_t dst_dma_list,
+ dma_addr_t src_dma_list,
+ u32 src_size,
+ const u8 *iv,
+ dma_addr_t aad_dma_list,
+ u32 aad_size,
+ u8 *out_tag,
+ u32 tag_size)
+{
+ u64 bit_len;
+ u32 val;
+ int rc;
+
+ rc = ocs_aes_validate_inputs(src_dma_list, src_size, iv,
+ GCM_AES_IV_SIZE, aad_dma_list,
+ aad_size, out_tag, tag_size, cipher,
+ OCS_MODE_GCM, instruction,
+ dst_dma_list);
+ if (rc)
+ return rc;
+
+ ocs_aes_init(aes_dev, OCS_MODE_GCM, cipher, instruction);
+
+ /* Compute and write J0 to OCS HW. */
+ ocs_aes_gcm_write_j0(aes_dev, iv);
+
+ /* Write out_tag byte length */
+ iowrite32(tag_size, aes_dev->base_reg + AES_TLEN_OFFSET);
+
+ /* Write the byte length of the last plaintext / ciphertext block. */
+ ocs_aes_write_last_data_blk_len(aes_dev, src_size);
+
+ /* Write ciphertext bit length */
+ bit_len = src_size * 8;
+ val = bit_len & 0xFFFFFFFF;
+ iowrite32(val, aes_dev->base_reg + AES_MULTIPURPOSE2_0_OFFSET);
+ val = bit_len >> 32;
+ iowrite32(val, aes_dev->base_reg + AES_MULTIPURPOSE2_1_OFFSET);
+
+ /* Write aad bit length */
+ bit_len = aad_size * 8;
+ val = bit_len & 0xFFFFFFFF;
+ iowrite32(val, aes_dev->base_reg + AES_MULTIPURPOSE2_2_OFFSET);
+ val = bit_len >> 32;
+ iowrite32(val, aes_dev->base_reg + AES_MULTIPURPOSE2_3_OFFSET);
+
+ /* Set AES_ACTIVE.TRIGGER to start the operation. */
+ aes_a_op_trigger(aes_dev);
+
+ /* Process AAD. */
+ if (aad_size) {
+ /* If aad present, configure DMA to feed it to the engine. */
+ dma_to_ocs_aes_ll(aes_dev, aad_dma_list);
+ aes_a_dma_active_src_ll_en(aes_dev);
+
+ /* Instructs engine to pad last block of aad, if needed. */
+ aes_a_set_last_gcx_and_adata(aes_dev);
+
+ /* Wait for DMA transfer to complete. */
+ rc = ocs_aes_irq_enable_and_wait(aes_dev, AES_DMA_SRC_DONE_INT);
+ if (rc)
+ return rc;
+ } else {
+ aes_a_set_last_gcx_and_adata(aes_dev);
+ }
+
+ /* Wait until adata (if present) has been processed. */
+ aes_a_wait_last_gcx(aes_dev);
+ aes_a_dma_wait_input_buffer_occupancy(aes_dev);
+
+ /* Now process payload. */
+ if (src_size) {
+ /* Configure and activate DMA for both input and output data. */
+ dma_to_ocs_aes_ll(aes_dev, src_dma_list);
+ dma_from_ocs_aes_ll(aes_dev, dst_dma_list);
+ aes_a_dma_active_src_dst_ll_en(aes_dev);
+ } else {
+ aes_a_dma_set_xfer_size_zero(aes_dev);
+ aes_a_dma_active(aes_dev);
+ }
+
+ /* Instruct AES/SMA4 engine payload processing is over. */
+ aes_a_set_last_gcx(aes_dev);
+
+ /* Wait for OCS AES engine to complete processing. */
+ rc = ocs_aes_irq_enable_and_wait(aes_dev, AES_COMPLETE_INT);
+ if (rc)
+ return rc;
+
+ ocs_aes_gcm_read_tag(aes_dev, out_tag, tag_size);
+
+ return 0;
+}
+
+/* Write encrypted tag to AES/SM4 engine. */
+static void ocs_aes_ccm_write_encrypted_tag(struct ocs_aes_dev *aes_dev,
+ const u8 *in_tag, u32 tag_size)
+{
+ int i;
+
+ /* Ensure DMA input buffer is empty */
+ aes_a_dma_wait_input_buffer_occupancy(aes_dev);
+
+ /*
+ * During CCM decrypt, the OCS block needs to finish processing the
+ * ciphertext before the tag is written. So delay needed after DMA has
+ * completed writing the ciphertext
+ */
+ aes_a_dma_reset_and_activate_perf_cntr(aes_dev);
+ aes_a_dma_wait_and_deactivate_perf_cntr(aes_dev,
+ CCM_DECRYPT_DELAY_TAG_CLK_COUNT);
+
+ /* Write encrypted tag to AES/SM4 engine. */
+ for (i = 0; i < tag_size; i++) {
+ iowrite8(in_tag[i], aes_dev->base_reg +
+ AES_A_DMA_INBUFFER_WRITE_FIFO_OFFSET);
+ }
+}
+
+/*
+ * Write B0 CCM block to OCS AES HW.
+ *
+ * Note: B0 format is documented in NIST Special Publication 800-38C
+ * https://nvlpubs.nist.gov/nistpubs/Legacy/SP/nistspecialpublication800-38c.pdf
+ * (see Section A.2.1)
+ */
+static int ocs_aes_ccm_write_b0(const struct ocs_aes_dev *aes_dev,
+ const u8 *iv, u32 adata_size, u32 tag_size,
+ u32 cryptlen)
+{
+ u8 b0[16]; /* CCM B0 block is 16 bytes long. */
+ int i, q;
+
+ /* Initialize B0 to 0. */
+ memset(b0, 0, sizeof(b0));
+
+ /*
+ * B0[0] is the 'Flags Octet' and has the following structure:
+ * bit 7: Reserved
+ * bit 6: Adata flag
+ * bit 5-3: t value encoded as (t-2)/2
+ * bit 2-0: q value encoded as q - 1
+ */
+ /* If there is AAD data, set the Adata flag. */
+ if (adata_size)
+ b0[0] |= BIT(6);
+ /*
+ * t denotes the octet length of T.
+ * t can only be an element of { 4, 6, 8, 10, 12, 14, 16} and is
+ * encoded as (t - 2) / 2
+ */
+ b0[0] |= (((tag_size - 2) / 2) & 0x7) << 3;
+ /*
+ * q is the octet length of Q.
+ * q can only be an element of {2, 3, 4, 5, 6, 7, 8} and is encoded as
+ * q - 1 == iv[0]
+ */
+ b0[0] |= iv[0] & 0x7;
+ /*
+ * Copy the Nonce N from IV to B0; N is located in iv[1]..iv[15 - q]
+ * and must be copied to b0[1]..b0[15-q].
+ * q == iv[0] + 1
+ */
+ q = iv[0] + 1;
+ for (i = 1; i <= 15 - q; i++)
+ b0[i] = iv[i];
+ /*
+ * The rest of B0 must contain Q, i.e., the message length.
+ * Q is encoded in q octets, in big-endian order, so to write it, we
+ * start from the end of B0 and we move backward.
+ */
+ i = sizeof(b0) - 1;
+ while (q) {
+ b0[i] = cryptlen & 0xff;
+ cryptlen >>= 8;
+ i--;
+ q--;
+ }
+ /*
+ * If cryptlen is not zero at this point, it means that its original
+ * value was too big.
+ */
+ if (cryptlen)
+ return -EOVERFLOW;
+ /* Now write B0 to OCS AES input buffer. */
+ for (i = 0; i < sizeof(b0); i++)
+ iowrite8(b0[i], aes_dev->base_reg +
+ AES_A_DMA_INBUFFER_WRITE_FIFO_OFFSET);
+ return 0;
+}
+
+/*
+ * Write adata length to OCS AES HW.
+ *
+ * Note: adata len encoding is documented in NIST Special Publication 800-38C
+ * https://nvlpubs.nist.gov/nistpubs/Legacy/SP/nistspecialpublication800-38c.pdf
+ * (see Section A.2.2)
+ */
+static void ocs_aes_ccm_write_adata_len(const struct ocs_aes_dev *aes_dev,
+ u64 adata_len)
+{
+ u8 enc_a[10]; /* Maximum encoded size: 10 octets. */
+ int i, len;
+
+ /*
+ * adata_len ('a') is encoded as follows:
+ * If 0 < a < 2^16 - 2^8 ==> 'a' encoded as [a]16, i.e., two octets
+ * (big endian).
+ * If 2^16 - 2^8 ≤ a < 2^32 ==> 'a' encoded as 0xff || 0xfe || [a]32,
+ * i.e., six octets (big endian).
+ * If 2^32 ≤ a < 2^64 ==> 'a' encoded as 0xff || 0xff || [a]64,
+ * i.e., ten octets (big endian).
+ */
+ if (adata_len < 65280) {
+ len = 2;
+ *(__be16 *)enc_a = cpu_to_be16(adata_len);
+ } else if (adata_len <= 0xFFFFFFFF) {
+ len = 6;
+ *(__be16 *)enc_a = cpu_to_be16(0xfffe);
+ *(__be32 *)&enc_a[2] = cpu_to_be32(adata_len);
+ } else { /* adata_len >= 2^32 */
+ len = 10;
+ *(__be16 *)enc_a = cpu_to_be16(0xffff);
+ *(__be64 *)&enc_a[2] = cpu_to_be64(adata_len);
+ }
+ for (i = 0; i < len; i++)
+ iowrite8(enc_a[i],
+ aes_dev->base_reg +
+ AES_A_DMA_INBUFFER_WRITE_FIFO_OFFSET);
+}
+
+static int ocs_aes_ccm_do_adata(struct ocs_aes_dev *aes_dev,
+ dma_addr_t adata_dma_list, u32 adata_size)
+{
+ int rc;
+
+ if (!adata_size) {
+ /* Since no aad the LAST_GCX bit can be set now */
+ aes_a_set_last_gcx_and_adata(aes_dev);
+ goto exit;
+ }
+
+ /* Adata case. */
+
+ /*
+ * Form the encoding of the Associated data length and write it
+ * to the AES/SM4 input buffer.
+ */
+ ocs_aes_ccm_write_adata_len(aes_dev, adata_size);
+
+ /* Configure the AES/SM4 DMA to fetch the Associated Data */
+ dma_to_ocs_aes_ll(aes_dev, adata_dma_list);
+
+ /* Activate DMA to fetch Associated data. */
+ aes_a_dma_active_src_ll_en(aes_dev);
+
+ /* Set LAST_GCX and LAST_ADATA in AES ACTIVE register. */
+ aes_a_set_last_gcx_and_adata(aes_dev);
+
+ /* Wait for DMA transfer to complete. */
+ rc = ocs_aes_irq_enable_and_wait(aes_dev, AES_DMA_SRC_DONE_INT);
+ if (rc)
+ return rc;
+
+exit:
+ /* Wait until adata (if present) has been processed. */
+ aes_a_wait_last_gcx(aes_dev);
+ aes_a_dma_wait_input_buffer_occupancy(aes_dev);
+
+ return 0;
+}
+
+static int ocs_aes_ccm_encrypt_do_payload(struct ocs_aes_dev *aes_dev,
+ dma_addr_t dst_dma_list,
+ dma_addr_t src_dma_list,
+ u32 src_size)
+{
+ if (src_size) {
+ /*
+ * Configure and activate DMA for both input and output
+ * data.
+ */
+ dma_to_ocs_aes_ll(aes_dev, src_dma_list);
+ dma_from_ocs_aes_ll(aes_dev, dst_dma_list);
+ aes_a_dma_active_src_dst_ll_en(aes_dev);
+ } else {
+ /* Configure and activate DMA for output data only. */
+ dma_from_ocs_aes_ll(aes_dev, dst_dma_list);
+ aes_a_dma_active_dst_ll_en(aes_dev);
+ }
+
+ /*
+ * Set the LAST GCX bit in AES_ACTIVE Register to instruct
+ * AES/SM4 engine to pad the last block of data.
+ */
+ aes_a_set_last_gcx(aes_dev);
+
+ /* We are done, wait for IRQ and return. */
+ return ocs_aes_irq_enable_and_wait(aes_dev, AES_COMPLETE_INT);
+}
+
+static int ocs_aes_ccm_decrypt_do_payload(struct ocs_aes_dev *aes_dev,
+ dma_addr_t dst_dma_list,
+ dma_addr_t src_dma_list,
+ u32 src_size)
+{
+ if (!src_size) {
+ /* Let engine process 0-length input. */
+ aes_a_dma_set_xfer_size_zero(aes_dev);
+ aes_a_dma_active(aes_dev);
+ aes_a_set_last_gcx(aes_dev);
+
+ return 0;
+ }
+
+ /*
+ * Configure and activate DMA for both input and output
+ * data.
+ */
+ dma_to_ocs_aes_ll(aes_dev, src_dma_list);
+ dma_from_ocs_aes_ll(aes_dev, dst_dma_list);
+ aes_a_dma_active_src_dst_ll_en(aes_dev);
+ /*
+ * Set the LAST GCX bit in AES_ACTIVE Register; this allows the
+ * AES/SM4 engine to differentiate between encrypted data and
+ * encrypted MAC.
+ */
+ aes_a_set_last_gcx(aes_dev);
+ /*
+ * Enable DMA DONE interrupt; once DMA transfer is over,
+ * interrupt handler will process the MAC/tag.
+ */
+ return ocs_aes_irq_enable_and_wait(aes_dev, AES_DMA_SRC_DONE_INT);
+}
+
+/*
+ * Compare Tag to Yr.
+ *
+ * Only used at the end of CCM decrypt. If tag == yr, message authentication
+ * has succeeded.
+ */
+static inline int ccm_compare_tag_to_yr(struct ocs_aes_dev *aes_dev,
+ u8 tag_size_bytes)
+{
+ u32 tag[AES_MAX_TAG_SIZE_U32];
+ u32 yr[AES_MAX_TAG_SIZE_U32];
+ u8 i;
+
+ /* Read Tag and Yr from AES registers. */
+ for (i = 0; i < AES_MAX_TAG_SIZE_U32; i++) {
+ tag[i] = ioread32(aes_dev->base_reg +
+ AES_T_MAC_0_OFFSET + (i * sizeof(u32)));
+ yr[i] = ioread32(aes_dev->base_reg +
+ AES_MULTIPURPOSE2_0_OFFSET +
+ (i * sizeof(u32)));
+ }
+
+ return memcmp(tag, yr, tag_size_bytes) ? -EBADMSG : 0;
+}
+
+/**
+ * ocs_aes_ccm_op() - Perform CCM operation.
+ * @aes_dev: The OCS AES device to use.
+ * @cipher: The Cipher to use (AES or SM4).
+ * @instruction: The instruction to perform (encrypt or decrypt).
+ * @dst_dma_list: The OCS DMA list mapping output memory.
+ * @src_dma_list: The OCS DMA list mapping input payload data.
+ * @src_size: The amount of data mapped by @src_dma_list.
+ * @iv: The input IV vector.
+ * @adata_dma_list: The OCS DMA list mapping input A-data.
+ * @adata_size: The amount of data mapped by @adata_dma_list.
+ * @in_tag: Input tag.
+ * @tag_size: The size (in bytes) of @in_tag.
+ *
+ * Note: for encrypt the tag is appended to the ciphertext (in the memory
+ * mapped by @dst_dma_list).
+ *
+ * Return: 0 on success, negative error code otherwise.
+ */
+int ocs_aes_ccm_op(struct ocs_aes_dev *aes_dev,
+ enum ocs_cipher cipher,
+ enum ocs_instruction instruction,
+ dma_addr_t dst_dma_list,
+ dma_addr_t src_dma_list,
+ u32 src_size,
+ u8 *iv,
+ dma_addr_t adata_dma_list,
+ u32 adata_size,
+ u8 *in_tag,
+ u32 tag_size)
+{
+ u32 *iv_32;
+ u8 lprime;
+ int rc;
+
+ rc = ocs_aes_validate_inputs(src_dma_list, src_size, iv,
+ AES_BLOCK_SIZE, adata_dma_list, adata_size,
+ in_tag, tag_size, cipher, OCS_MODE_CCM,
+ instruction, dst_dma_list);
+ if (rc)
+ return rc;
+
+ ocs_aes_init(aes_dev, OCS_MODE_CCM, cipher, instruction);
+
+ /*
+ * Note: rfc 3610 and NIST 800-38C require counter of zero to encrypt
+ * auth tag so ensure this is the case
+ */
+ lprime = iv[L_PRIME_IDX];
+ memset(&iv[COUNTER_START(lprime)], 0, COUNTER_LEN(lprime));
+
+ /*
+ * Nonce is already converted to ctr0 before being passed into this
+ * function as iv.
+ */
+ iv_32 = (u32 *)iv;
+ iowrite32(__swab32(iv_32[0]),
+ aes_dev->base_reg + AES_MULTIPURPOSE1_3_OFFSET);
+ iowrite32(__swab32(iv_32[1]),
+ aes_dev->base_reg + AES_MULTIPURPOSE1_2_OFFSET);
+ iowrite32(__swab32(iv_32[2]),
+ aes_dev->base_reg + AES_MULTIPURPOSE1_1_OFFSET);
+ iowrite32(__swab32(iv_32[3]),
+ aes_dev->base_reg + AES_MULTIPURPOSE1_0_OFFSET);
+
+ /* Write MAC/tag length in register AES_TLEN */
+ iowrite32(tag_size, aes_dev->base_reg + AES_TLEN_OFFSET);
+ /*
+ * Write the byte length of the last AES/SM4 block of Payload data
+ * (without zero padding and without the length of the MAC) in register
+ * AES_PLEN.
+ */
+ ocs_aes_write_last_data_blk_len(aes_dev, src_size);
+
+ /* Set AES_ACTIVE.TRIGGER to start the operation. */
+ aes_a_op_trigger(aes_dev);
+
+ aes_a_dma_reset_and_activate_perf_cntr(aes_dev);
+
+ /* Form block B0 and write it to the AES/SM4 input buffer. */
+ rc = ocs_aes_ccm_write_b0(aes_dev, iv, adata_size, tag_size, src_size);
+ if (rc)
+ return rc;
+ /*
+ * Ensure there has been at least CCM_DECRYPT_DELAY_LAST_GCX_CLK_COUNT
+ * clock cycles since TRIGGER bit was set
+ */
+ aes_a_dma_wait_and_deactivate_perf_cntr(aes_dev,
+ CCM_DECRYPT_DELAY_LAST_GCX_CLK_COUNT);
+
+ /* Process Adata. */
+ ocs_aes_ccm_do_adata(aes_dev, adata_dma_list, adata_size);
+
+ /* For Encrypt case we just process the payload and return. */
+ if (instruction == OCS_ENCRYPT) {
+ return ocs_aes_ccm_encrypt_do_payload(aes_dev, dst_dma_list,
+ src_dma_list, src_size);
+ }
+ /* For Decypt we need to process the payload and then the tag. */
+ rc = ocs_aes_ccm_decrypt_do_payload(aes_dev, dst_dma_list,
+ src_dma_list, src_size);
+ if (rc)
+ return rc;
+
+ /* Process MAC/tag directly: feed tag to engine and wait for IRQ. */
+ ocs_aes_ccm_write_encrypted_tag(aes_dev, in_tag, tag_size);
+ rc = ocs_aes_irq_enable_and_wait(aes_dev, AES_COMPLETE_INT);
+ if (rc)
+ return rc;
+
+ return ccm_compare_tag_to_yr(aes_dev, tag_size);
+}
+
+/**
+ * ocs_create_linked_list_from_sg() - Create OCS DMA linked list from SG list.
+ * @aes_dev: The OCS AES device the list will be created for.
+ * @sg: The SG list OCS DMA linked list will be created from. When
+ * passed to this function, @sg must have been already mapped
+ * with dma_map_sg().
+ * @sg_dma_count: The number of DMA-mapped entries in @sg. This must be the
+ * value returned by dma_map_sg() when @sg was mapped.
+ * @dll_desc: The OCS DMA dma_list to use to store information about the
+ * created linked list.
+ * @data_size: The size of the data (from the SG list) to be mapped into the
+ * OCS DMA linked list.
+ * @data_offset: The offset (within the SG list) of the data to be mapped.
+ *
+ * Return: 0 on success, negative error code otherwise.
+ */
+int ocs_create_linked_list_from_sg(const struct ocs_aes_dev *aes_dev,
+ struct scatterlist *sg,
+ int sg_dma_count,
+ struct ocs_dll_desc *dll_desc,
+ size_t data_size, size_t data_offset)
+{
+ struct ocs_dma_linked_list *ll = NULL;
+ struct scatterlist *sg_tmp;
+ unsigned int tmp;
+ int dma_nents;
+ int i;
+
+ if (!dll_desc || !sg || !aes_dev)
+ return -EINVAL;
+
+ /* Default values for when no ddl_desc is created. */
+ dll_desc->vaddr = NULL;
+ dll_desc->dma_addr = DMA_MAPPING_ERROR;
+ dll_desc->size = 0;
+
+ if (data_size == 0)
+ return 0;
+
+ /* Loop over sg_list until we reach entry at specified offset. */
+ while (data_offset >= sg_dma_len(sg)) {
+ data_offset -= sg_dma_len(sg);
+ sg_dma_count--;
+ sg = sg_next(sg);
+ /* If we reach the end of the list, offset was invalid. */
+ if (!sg || sg_dma_count == 0)
+ return -EINVAL;
+ }
+
+ /* Compute number of DMA-mapped SG entries to add into OCS DMA list. */
+ dma_nents = 0;
+ tmp = 0;
+ sg_tmp = sg;
+ while (tmp < data_offset + data_size) {
+ /* If we reach the end of the list, data_size was invalid. */
+ if (!sg_tmp)
+ return -EINVAL;
+ tmp += sg_dma_len(sg_tmp);
+ dma_nents++;
+ sg_tmp = sg_next(sg_tmp);
+ }
+ if (dma_nents > sg_dma_count)
+ return -EINVAL;
+
+ /* Allocate the DMA list, one entry for each SG entry. */
+ dll_desc->size = sizeof(struct ocs_dma_linked_list) * dma_nents;
+ dll_desc->vaddr = dma_alloc_coherent(aes_dev->dev, dll_desc->size,
+ &dll_desc->dma_addr, GFP_KERNEL);
+ if (!dll_desc->vaddr)
+ return -ENOMEM;
+
+ /* Populate DMA linked list entries. */
+ ll = dll_desc->vaddr;
+ for (i = 0; i < dma_nents; i++, sg = sg_next(sg)) {
+ ll[i].src_addr = sg_dma_address(sg) + data_offset;
+ ll[i].src_len = (sg_dma_len(sg) - data_offset) < data_size ?
+ (sg_dma_len(sg) - data_offset) : data_size;
+ data_offset = 0;
+ data_size -= ll[i].src_len;
+ /* Current element points to the DMA address of the next one. */
+ ll[i].next = dll_desc->dma_addr + (sizeof(*ll) * (i + 1));
+ ll[i].ll_flags = 0;
+ }
+ /* Terminate last element. */
+ ll[i - 1].next = 0;
+ ll[i - 1].ll_flags = OCS_LL_DMA_FLAG_TERMINATE;
+
+ return 0;
+}
diff --git a/drivers/crypto/keembay/ocs-aes.h b/drivers/crypto/keembay/ocs-aes.h
new file mode 100644
index 000000000000..c035fc48b7ed
--- /dev/null
+++ b/drivers/crypto/keembay/ocs-aes.h
@@ -0,0 +1,129 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+/*
+ * Intel Keem Bay OCS AES Crypto Driver.
+ *
+ * Copyright (C) 2018-2020 Intel Corporation
+ */
+
+#ifndef _CRYPTO_OCS_AES_H
+#define _CRYPTO_OCS_AES_H
+
+#include <linux/dma-mapping.h>
+
+enum ocs_cipher {
+ OCS_AES = 0,
+ OCS_SM4 = 1,
+};
+
+enum ocs_mode {
+ OCS_MODE_ECB = 0,
+ OCS_MODE_CBC = 1,
+ OCS_MODE_CTR = 2,
+ OCS_MODE_CCM = 6,
+ OCS_MODE_GCM = 7,
+ OCS_MODE_CTS = 9,
+};
+
+enum ocs_instruction {
+ OCS_ENCRYPT = 0,
+ OCS_DECRYPT = 1,
+ OCS_EXPAND = 2,
+ OCS_BYPASS = 3,
+};
+
+/**
+ * struct ocs_aes_dev - AES device context.
+ * @list: List head for insertion into device list hold
+ * by driver.
+ * @dev: OCS AES device.
+ * @irq: IRQ number.
+ * @base_reg: IO base address of OCS AES.
+ * @irq_copy_completion: Completion to indicate IRQ has been triggered.
+ * @dma_err_mask: Error reported by OCS DMA interrupts.
+ * @engine: Crypto engine for the device.
+ */
+struct ocs_aes_dev {
+ struct list_head list;
+ struct device *dev;
+ int irq;
+ void __iomem *base_reg;
+ struct completion irq_completion;
+ u32 dma_err_mask;
+ struct crypto_engine *engine;
+};
+
+/**
+ * struct ocs_dll_desc - Descriptor of an OCS DMA Linked List.
+ * @vaddr: Virtual address of the linked list head.
+ * @dma_addr: DMA address of the linked list head.
+ * @size: Size (in bytes) of the linked list.
+ */
+struct ocs_dll_desc {
+ void *vaddr;
+ dma_addr_t dma_addr;
+ size_t size;
+};
+
+int ocs_aes_set_key(struct ocs_aes_dev *aes_dev, const u32 key_size,
+ const u8 *key, const enum ocs_cipher cipher);
+
+int ocs_aes_op(struct ocs_aes_dev *aes_dev,
+ enum ocs_mode mode,
+ enum ocs_cipher cipher,
+ enum ocs_instruction instruction,
+ dma_addr_t dst_dma_list,
+ dma_addr_t src_dma_list,
+ u32 src_size,
+ u8 *iv,
+ u32 iv_size);
+
+/**
+ * ocs_aes_bypass_op() - Use OCS DMA to copy data.
+ * @aes_dev: The OCS AES device to use.
+ * @dst_dma_list: The OCS DMA list mapping the memory where input data
+ * will be copied to.
+ * @src_dma_list: The OCS DMA list mapping input data.
+ * @src_size: The amount of data to copy.
+ */
+static inline int ocs_aes_bypass_op(struct ocs_aes_dev *aes_dev,
+ dma_addr_t dst_dma_list,
+ dma_addr_t src_dma_list, u32 src_size)
+{
+ return ocs_aes_op(aes_dev, OCS_MODE_ECB, OCS_AES, OCS_BYPASS,
+ dst_dma_list, src_dma_list, src_size, NULL, 0);
+}
+
+int ocs_aes_gcm_op(struct ocs_aes_dev *aes_dev,
+ enum ocs_cipher cipher,
+ enum ocs_instruction instruction,
+ dma_addr_t dst_dma_list,
+ dma_addr_t src_dma_list,
+ u32 src_size,
+ const u8 *iv,
+ dma_addr_t aad_dma_list,
+ u32 aad_size,
+ u8 *out_tag,
+ u32 tag_size);
+
+int ocs_aes_ccm_op(struct ocs_aes_dev *aes_dev,
+ enum ocs_cipher cipher,
+ enum ocs_instruction instruction,
+ dma_addr_t dst_dma_list,
+ dma_addr_t src_dma_list,
+ u32 src_size,
+ u8 *iv,
+ dma_addr_t adata_dma_list,
+ u32 adata_size,
+ u8 *in_tag,
+ u32 tag_size);
+
+int ocs_create_linked_list_from_sg(const struct ocs_aes_dev *aes_dev,
+ struct scatterlist *sg,
+ int sg_dma_count,
+ struct ocs_dll_desc *dll_desc,
+ size_t data_size,
+ size_t data_offset);
+
+irqreturn_t ocs_aes_irq_handler(int irq, void *dev_id);
+
+#endif
--
2.26.2
^ permalink raw reply related [flat|nested] 5+ messages in thread