* [PATCH] bootcount: allow to use this feature on TPL
@ 2020-12-11 18:56 Philippe Reynes
2020-12-12 15:40 ` Simon Glass
2021-01-28 23:56 ` Tom Rini
0 siblings, 2 replies; 3+ messages in thread
From: Philippe Reynes @ 2020-12-11 18:56 UTC (permalink / raw)
To: u-boot
This commit add an option TPL_BOOTCOUNT_LIMIT to
use bootcount on TPL.
Signed-off-by: Philippe Reynes <philippe.reynes@softathome.com>
---
common/spl/Kconfig | 9 ++++++++-
common/spl/spl.c | 4 +++-
drivers/Makefile | 1 +
include/bootcount.h | 6 +++---
4 files changed, 15 insertions(+), 5 deletions(-)
diff --git a/common/spl/Kconfig b/common/spl/Kconfig
index d8086bd9e8..29c64ebb80 100644
--- a/common/spl/Kconfig
+++ b/common/spl/Kconfig
@@ -177,7 +177,7 @@ config SPL_BOOTROM_SUPPORT
config SPL_BOOTCOUNT_LIMIT
bool "Support bootcount in SPL"
- depends on SPL_ENV_SUPPORT
+ depends on SPL_ENV_SUPPORT && !TPL_BOOTCOUNT_LIMIT
help
On some boards, which use 'falcon' mode, it is necessary to check
and increment the number of boot attempts. Such boards do not
@@ -1363,6 +1363,13 @@ config TPL_BOARD_INIT
spl_board_init() from board_init_r(). This function should be
provided by the board.
+config TPL_BOOTCOUNT_LIMIT
+ bool "Support bootcount in TPL"
+ depends on TPL_ENV_SUPPORT
+ help
+ If this option is enabled, the TPL will support bootcount.
+ For example, it may be useful to choose the device to boot.
+
config TPL_LDSCRIPT
string "Linker script for the TPL stage"
depends on TPL
diff --git a/common/spl/spl.c b/common/spl/spl.c
index 63c48fbf33..c432f14c29 100644
--- a/common/spl/spl.c
+++ b/common/spl/spl.c
@@ -833,7 +833,9 @@ ulong spl_relocate_stack_gd(void)
#endif
}
-#if defined(CONFIG_BOOTCOUNT_LIMIT) && !defined(CONFIG_SPL_BOOTCOUNT_LIMIT)
+#if defined(CONFIG_BOOTCOUNT_LIMIT) && \
+ ((!defined(CONFIG_TPL_BUILD) && !defined(CONFIG_SPL_BOOTCOUNT_LIMIT)) || \
+ (defined(CONFIG_TPL_BUILD) && !defined(CONFIG_TPL_BOOTCOUNT_LIMIT)))
void bootcount_store(ulong a)
{
}
diff --git a/drivers/Makefile b/drivers/Makefile
index e371bc32bb..c562a719f7 100644
--- a/drivers/Makefile
+++ b/drivers/Makefile
@@ -69,6 +69,7 @@ endif
ifdef CONFIG_TPL_BUILD
+obj-$(CONFIG_TPL_BOOTCOUNT_LIMIT) += bootcount/
obj-$(CONFIG_TPL_MPC8XXX_INIT_DDR_SUPPORT) += ddr/fsl/
endif
diff --git a/include/bootcount.h b/include/bootcount.h
index cd30403984..b1d1fe53d1 100644
--- a/include/bootcount.h
+++ b/include/bootcount.h
@@ -69,7 +69,7 @@ void bootcount_store(ulong);
*/
ulong bootcount_load(void);
-#if defined(CONFIG_SPL_BOOTCOUNT_LIMIT) || defined(CONFIG_BOOTCOUNT_LIMIT)
+#if defined(CONFIG_SPL_BOOTCOUNT_LIMIT) || defined(CONFIG_TPL_BOOTCOUNT_LIMIT) || defined(CONFIG_BOOTCOUNT_LIMIT)
#if !defined(CONFIG_SYS_BOOTCOUNT_LE) && !defined(CONFIG_SYS_BOOTCOUNT_BE)
# if __BYTE_ORDER == __LITTLE_ENDIAN
@@ -130,7 +130,7 @@ static inline void bootcount_inc(void)
#ifndef CONFIG_SPL_BUILD
/* Only increment bootcount when no bootcount support in SPL */
-#ifndef CONFIG_SPL_BOOTCOUNT_LIMIT
+#if !defined(CONFIG_SPL_BOOTCOUNT_LIMIT) && !defined(CONFIG_TPL_BOOTCOUNT_LIMIT)
bootcount_store(++bootcount);
#endif
env_set_ulong("bootcount", bootcount);
@@ -140,5 +140,5 @@ static inline void bootcount_inc(void)
#else
static inline int bootcount_error(void) { return 0; }
static inline void bootcount_inc(void) {}
-#endif /* CONFIG_SPL_BOOTCOUNT_LIMIT || CONFIG_BOOTCOUNT_LIMIT */
+#endif /* CONFIG_SPL_BOOTCOUNT_LIMIT || CONFIG_TPL_BOOTCOUNT_LIMIT || CONFIG_BOOTCOUNT_LIMIT */
#endif /* _BOOTCOUNT_H__ */
--
2.17.1
^ permalink raw reply related [flat|nested] 3+ messages in thread
* [PATCH] bootcount: allow to use this feature on TPL
2020-12-11 18:56 [PATCH] bootcount: allow to use this feature on TPL Philippe Reynes
@ 2020-12-12 15:40 ` Simon Glass
2021-01-28 23:56 ` Tom Rini
1 sibling, 0 replies; 3+ messages in thread
From: Simon Glass @ 2020-12-12 15:40 UTC (permalink / raw)
To: u-boot
On Fri, 11 Dec 2020 at 11:57, Philippe Reynes
<philippe.reynes@softathome.com> wrote:
>
> This commit add an option TPL_BOOTCOUNT_LIMIT to
> use bootcount on TPL.
>
> Signed-off-by: Philippe Reynes <philippe.reynes@softathome.com>
> ---
> common/spl/Kconfig | 9 ++++++++-
> common/spl/spl.c | 4 +++-
> drivers/Makefile | 1 +
> include/bootcount.h | 6 +++---
> 4 files changed, 15 insertions(+), 5 deletions(-)
Reviewed-by: Simon Glass <sjg@chromium.org>
We really should have tests for this. We have a way of doing sandbox
SPL unit tests now, but not for TPL. I suppose it would be fairly easy
to add.
>
> diff --git a/common/spl/Kconfig b/common/spl/Kconfig
> index d8086bd9e8..29c64ebb80 100644
> --- a/common/spl/Kconfig
> +++ b/common/spl/Kconfig
> @@ -177,7 +177,7 @@ config SPL_BOOTROM_SUPPORT
>
> config SPL_BOOTCOUNT_LIMIT
> bool "Support bootcount in SPL"
> - depends on SPL_ENV_SUPPORT
> + depends on SPL_ENV_SUPPORT && !TPL_BOOTCOUNT_LIMIT
> help
> On some boards, which use 'falcon' mode, it is necessary to check
> and increment the number of boot attempts. Such boards do not
> @@ -1363,6 +1363,13 @@ config TPL_BOARD_INIT
> spl_board_init() from board_init_r(). This function should be
> provided by the board.
>
> +config TPL_BOOTCOUNT_LIMIT
> + bool "Support bootcount in TPL"
> + depends on TPL_ENV_SUPPORT
> + help
> + If this option is enabled, the TPL will support bootcount.
> + For example, it may be useful to choose the device to boot.
> +
> config TPL_LDSCRIPT
> string "Linker script for the TPL stage"
> depends on TPL
> diff --git a/common/spl/spl.c b/common/spl/spl.c
> index 63c48fbf33..c432f14c29 100644
> --- a/common/spl/spl.c
> +++ b/common/spl/spl.c
> @@ -833,7 +833,9 @@ ulong spl_relocate_stack_gd(void)
> #endif
> }
>
> -#if defined(CONFIG_BOOTCOUNT_LIMIT) && !defined(CONFIG_SPL_BOOTCOUNT_LIMIT)
> +#if defined(CONFIG_BOOTCOUNT_LIMIT) && \
> + ((!defined(CONFIG_TPL_BUILD) && !defined(CONFIG_SPL_BOOTCOUNT_LIMIT)) || \
> + (defined(CONFIG_TPL_BUILD) && !defined(CONFIG_TPL_BOOTCOUNT_LIMIT)))
> void bootcount_store(ulong a)
> {
> }
> diff --git a/drivers/Makefile b/drivers/Makefile
> index e371bc32bb..c562a719f7 100644
> --- a/drivers/Makefile
> +++ b/drivers/Makefile
> @@ -69,6 +69,7 @@ endif
>
> ifdef CONFIG_TPL_BUILD
>
> +obj-$(CONFIG_TPL_BOOTCOUNT_LIMIT) += bootcount/
> obj-$(CONFIG_TPL_MPC8XXX_INIT_DDR_SUPPORT) += ddr/fsl/
>
> endif
> diff --git a/include/bootcount.h b/include/bootcount.h
> index cd30403984..b1d1fe53d1 100644
> --- a/include/bootcount.h
> +++ b/include/bootcount.h
> @@ -69,7 +69,7 @@ void bootcount_store(ulong);
> */
> ulong bootcount_load(void);
>
> -#if defined(CONFIG_SPL_BOOTCOUNT_LIMIT) || defined(CONFIG_BOOTCOUNT_LIMIT)
> +#if defined(CONFIG_SPL_BOOTCOUNT_LIMIT) || defined(CONFIG_TPL_BOOTCOUNT_LIMIT) || defined(CONFIG_BOOTCOUNT_LIMIT)
>
> #if !defined(CONFIG_SYS_BOOTCOUNT_LE) && !defined(CONFIG_SYS_BOOTCOUNT_BE)
> # if __BYTE_ORDER == __LITTLE_ENDIAN
> @@ -130,7 +130,7 @@ static inline void bootcount_inc(void)
>
> #ifndef CONFIG_SPL_BUILD
> /* Only increment bootcount when no bootcount support in SPL */
> -#ifndef CONFIG_SPL_BOOTCOUNT_LIMIT
> +#if !defined(CONFIG_SPL_BOOTCOUNT_LIMIT) && !defined(CONFIG_TPL_BOOTCOUNT_LIMIT)
> bootcount_store(++bootcount);
> #endif
> env_set_ulong("bootcount", bootcount);
> @@ -140,5 +140,5 @@ static inline void bootcount_inc(void)
> #else
> static inline int bootcount_error(void) { return 0; }
> static inline void bootcount_inc(void) {}
> -#endif /* CONFIG_SPL_BOOTCOUNT_LIMIT || CONFIG_BOOTCOUNT_LIMIT */
> +#endif /* CONFIG_SPL_BOOTCOUNT_LIMIT || CONFIG_TPL_BOOTCOUNT_LIMIT || CONFIG_BOOTCOUNT_LIMIT */
> #endif /* _BOOTCOUNT_H__ */
> --
> 2.17.1
>
^ permalink raw reply [flat|nested] 3+ messages in thread
* [PATCH] bootcount: allow to use this feature on TPL
2020-12-11 18:56 [PATCH] bootcount: allow to use this feature on TPL Philippe Reynes
2020-12-12 15:40 ` Simon Glass
@ 2021-01-28 23:56 ` Tom Rini
1 sibling, 0 replies; 3+ messages in thread
From: Tom Rini @ 2021-01-28 23:56 UTC (permalink / raw)
To: u-boot
On Fri, Dec 11, 2020 at 07:56:47PM +0100, Philippe Reynes wrote:
> This commit add an option TPL_BOOTCOUNT_LIMIT to
> use bootcount on TPL.
>
> Signed-off-by: Philippe Reynes <philippe.reynes@softathome.com>
> Reviewed-by: Simon Glass <sjg@chromium.org>
Applied to u-boot/master, thanks!
--
Tom
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 659 bytes
Desc: not available
URL: <https://lists.denx.de/pipermail/u-boot/attachments/20210128/f75398fb/attachment.sig>
^ permalink raw reply [flat|nested] 3+ messages in thread
end of thread, other threads:[~2021-01-28 23:56 UTC | newest]
Thread overview: 3+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2020-12-11 18:56 [PATCH] bootcount: allow to use this feature on TPL Philippe Reynes
2020-12-12 15:40 ` Simon Glass
2021-01-28 23:56 ` Tom Rini
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.