[PATCH AUTOSEL 5.4 01/14] drm/tegra: replace idr_init() by idr_init_base()

[PATCH AUTOSEL 5.4 01/14] drm/tegra: replace idr_init() by idr_init_base()

[Sasha Levin]

From: Deepak R Varma <mh12gx2825@gmail.com>

[ Upstream commit 41f71629b4c432f8dd47d70ace813be5f79d4d75 ]

idr_init() uses base 0 which is an invalid identifier for this driver.
The new function idr_init_base allows IDR to set the ID lookup from
base 1. This avoids all lookups that otherwise starts from 0 since
0 is always unused.

References: commit 6ce711f27500 ("idr: Make 1-based IDRs more efficient")

Signed-off-by: Deepak R Varma <mh12gx2825@gmail.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/gpu/drm/tegra/drm.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/gpu/drm/tegra/drm.c b/drivers/gpu/drm/tegra/drm.c
index bc7cc32140f81..6833dfad7241b 100644
--- a/drivers/gpu/drm/tegra/drm.c
+++ b/drivers/gpu/drm/tegra/drm.c
@@ -256,7 +256,7 @@ static int tegra_drm_open(struct drm_device *drm, struct drm_file *filp)
 	if (!fpriv)
 		return -ENOMEM;
 
-	idr_init(&fpriv->contexts);
+	idr_init_base(&fpriv->contexts, 1);
 	mutex_init(&fpriv->lock);
 	filp->driver_priv = fpriv;
 
-- 
2.27.0

[PATCH AUTOSEL 5.4 01/14] drm/tegra: replace idr_init() by idr_init_base()

[Sasha Levin]

From: Deepak R Varma <mh12gx2825@gmail.com>

[ Upstream commit 41f71629b4c432f8dd47d70ace813be5f79d4d75 ]

idr_init() uses base 0 which is an invalid identifier for this driver.
The new function idr_init_base allows IDR to set the ID lookup from
base 1. This avoids all lookups that otherwise starts from 0 since
0 is always unused.

References: commit 6ce711f27500 ("idr: Make 1-based IDRs more efficient")

Signed-off-by: Deepak R Varma <mh12gx2825@gmail.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/gpu/drm/tegra/drm.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/gpu/drm/tegra/drm.c b/drivers/gpu/drm/tegra/drm.c
index bc7cc32140f81..6833dfad7241b 100644
--- a/drivers/gpu/drm/tegra/drm.c
+++ b/drivers/gpu/drm/tegra/drm.c
@@ -256,7 +256,7 @@ static int tegra_drm_open(struct drm_device *drm, struct drm_file *filp)
 	if (!fpriv)
 		return -ENOMEM;
 
-	idr_init(&fpriv->contexts);
+	idr_init_base(&fpriv->contexts, 1);
 	mutex_init(&fpriv->lock);
 	filp->driver_priv = fpriv;
 
-- 
2.27.0

_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel

[PATCH AUTOSEL 5.4 02/14] kernel/cpu: add arch override for clear_tasks_mm_cpumask() mm handling

[Sasha Levin]

From: Nicholas Piggin <npiggin@gmail.com>

[ Upstream commit 8ff00399b153440c1c83e20c43020385b416415b ]

powerpc/64s keeps a counter in the mm which counts bits set in
mm_cpumask as well as other things. This means it can't use generic code
to clear bits out of the mask and doesn't adjust the arch specific
counter.

Add an arch override that allows powerpc/64s to use
clear_tasks_mm_cpumask().

Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Reviewed-by: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20201126102530.691335-4-npiggin@gmail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 kernel/cpu.c | 6 +++++-
 1 file changed, 5 insertions(+), 1 deletion(-)

diff --git a/kernel/cpu.c b/kernel/cpu.c
index 7527825ac7daa..fa0e5727b4d9c 100644
--- a/kernel/cpu.c
+++ b/kernel/cpu.c
@@ -815,6 +815,10 @@ void __init cpuhp_threads_init(void)
 }
 
 #ifdef CONFIG_HOTPLUG_CPU
+#ifndef arch_clear_mm_cpumask_cpu
+#define arch_clear_mm_cpumask_cpu(cpu, mm) cpumask_clear_cpu(cpu, mm_cpumask(mm))
+#endif
+
 /**
  * clear_tasks_mm_cpumask - Safely clear tasks' mm_cpumask for a CPU
  * @cpu: a CPU id
@@ -850,7 +854,7 @@ void clear_tasks_mm_cpumask(int cpu)
 		t = find_lock_task_mm(p);
 		if (!t)
 			continue;
-		cpumask_clear_cpu(cpu, mm_cpumask(t->mm));
+		arch_clear_mm_cpumask_cpu(cpu, t->mm);
 		task_unlock(t);
 	}
 	rcu_read_unlock();
-- 
2.27.0

[PATCH AUTOSEL 5.4 03/14] drm/tegra: sor: Disable clocks on error in tegra_sor_init()

[Sasha Levin]

From: Qinglang Miao <miaoqinglang@huawei.com>

[ Upstream commit bf3a3cdcad40e5928a22ea0fd200d17fd6d6308d ]

Fix the missing clk_disable_unprepare() before return from
tegra_sor_init() in the error handling case.

Signed-off-by: Qinglang Miao <miaoqinglang@huawei.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/gpu/drm/tegra/sor.c | 10 ++++++++--
 1 file changed, 8 insertions(+), 2 deletions(-)

diff --git a/drivers/gpu/drm/tegra/sor.c b/drivers/gpu/drm/tegra/sor.c
index 75e65d9536d54..6c3d221652393 100644
--- a/drivers/gpu/drm/tegra/sor.c
+++ b/drivers/gpu/drm/tegra/sor.c
@@ -2899,6 +2899,7 @@ static int tegra_sor_init(struct host1x_client *client)
 		if (err < 0) {
 			dev_err(sor->dev, "failed to deassert SOR reset: %d\n",
 				err);
+			clk_disable_unprepare(sor->clk);
 			return err;
 		}
 
@@ -2906,12 +2907,17 @@ static int tegra_sor_init(struct host1x_client *client)
 	}
 
 	err = clk_prepare_enable(sor->clk_safe);
-	if (err < 0)
+	if (err < 0) {
+		clk_disable_unprepare(sor->clk);
 		return err;
+	}
 
 	err = clk_prepare_enable(sor->clk_dp);
-	if (err < 0)
+	if (err < 0) {
+		clk_disable_unprepare(sor->clk_safe);
+		clk_disable_unprepare(sor->clk);
 		return err;
+	}
 
 	/*
 	 * Enable and unmask the HDA codec SCRATCH0 register interrupt. This
-- 
2.27.0

[PATCH AUTOSEL 5.4 03/14] drm/tegra: sor: Disable clocks on error in tegra_sor_init()

[Sasha Levin]

From: Qinglang Miao <miaoqinglang@huawei.com>

[ Upstream commit bf3a3cdcad40e5928a22ea0fd200d17fd6d6308d ]

Fix the missing clk_disable_unprepare() before return from
tegra_sor_init() in the error handling case.

Signed-off-by: Qinglang Miao <miaoqinglang@huawei.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/gpu/drm/tegra/sor.c | 10 ++++++++--
 1 file changed, 8 insertions(+), 2 deletions(-)

diff --git a/drivers/gpu/drm/tegra/sor.c b/drivers/gpu/drm/tegra/sor.c
index 75e65d9536d54..6c3d221652393 100644
--- a/drivers/gpu/drm/tegra/sor.c
+++ b/drivers/gpu/drm/tegra/sor.c
@@ -2899,6 +2899,7 @@ static int tegra_sor_init(struct host1x_client *client)
 		if (err < 0) {
 			dev_err(sor->dev, "failed to deassert SOR reset: %d\n",
 				err);
+			clk_disable_unprepare(sor->clk);
 			return err;
 		}
 
@@ -2906,12 +2907,17 @@ static int tegra_sor_init(struct host1x_client *client)
 	}
 
 	err = clk_prepare_enable(sor->clk_safe);
-	if (err < 0)
+	if (err < 0) {
+		clk_disable_unprepare(sor->clk);
 		return err;
+	}
 
 	err = clk_prepare_enable(sor->clk_dp);
-	if (err < 0)
+	if (err < 0) {
+		clk_disable_unprepare(sor->clk_safe);
+		clk_disable_unprepare(sor->clk);
 		return err;
+	}
 
 	/*
 	 * Enable and unmask the HDA codec SCRATCH0 register interrupt. This
-- 
2.27.0

_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel

[PATCH AUTOSEL 5.4 04/14] habanalabs: put devices before driver removal

[Sasha Levin]

From: Ofir Bitton <obitton@habana.ai>

[ Upstream commit 5555b7c56bdec7a29c789fec27f84d40f52fbdfa ]

Driver never puts its device and control_device objects, hence
a memory leak is introduced every driver removal.

Signed-off-by: Ofir Bitton <obitton@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/misc/habanalabs/device.c | 16 ++++++++--------
 1 file changed, 8 insertions(+), 8 deletions(-)

diff --git a/drivers/misc/habanalabs/device.c b/drivers/misc/habanalabs/device.c
index a7a4fed4d8995..3eeb1920ddb43 100644
--- a/drivers/misc/habanalabs/device.c
+++ b/drivers/misc/habanalabs/device.c
@@ -229,16 +229,16 @@ delete_cdev_device:
 
 static void device_cdev_sysfs_del(struct hl_device *hdev)
 {
-	/* device_release() won't be called so must free devices explicitly */
-	if (!hdev->cdev_sysfs_created) {
-		kfree(hdev->dev_ctrl);
-		kfree(hdev->dev);
-		return;
-	}
+	if (!hdev->cdev_sysfs_created)
+		goto put_devices;
 
 	hl_sysfs_fini(hdev);
 	cdev_device_del(&hdev->cdev_ctrl, hdev->dev_ctrl);
 	cdev_device_del(&hdev->cdev, hdev->dev);
+
+put_devices:
+	put_device(hdev->dev);
+	put_device(hdev->dev_ctrl);
 }
 
 /*
@@ -1285,9 +1285,9 @@ sw_fini:
 early_fini:
 	device_early_fini(hdev);
 free_dev_ctrl:
-	kfree(hdev->dev_ctrl);
+	put_device(hdev->dev_ctrl);
 free_dev:
-	kfree(hdev->dev);
+	put_device(hdev->dev);
 out_disabled:
 	hdev->disabled = true;
 	if (add_cdev_sysfs_on_err)
-- 
2.27.0

[PATCH AUTOSEL 5.4 05/14] arm64: syscall: exit userspace before unmasking exceptions

[Sasha Levin]

From: Mark Rutland <mark.rutland@arm.com>

[ Upstream commit ca1314d73eed493c49bb1932c60a8605530db2e4 ]

In el0_svc_common() we unmask exceptions before we call user_exit(), and
so there's a window where an IRQ or debug exception can be taken while
RCU is not watching. In do_debug_exception() we account for this in via
debug_exception_{enter,exit}(), but in the el1_irq asm we do not and we
call trace functions which rely on RCU before we have a guarantee that
RCU is watching.

Let's avoid this by having el0_svc_common() exit userspace before
unmasking exceptions, matching what we do for all other EL0 entry paths.
We can use user_exit_irqoff() to avoid the pointless save/restore of IRQ
flags while we're sure exceptions are masked in DAIF.

The workaround for Cortex-A76 erratum 1463225 may trigger a debug
exception before this point, but the debug code invoked in this case is
safe even when RCU is not watching.

Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: James Morse <james.morse@arm.com>
Cc: Will Deacon <will@kernel.org>
Link: https://lore.kernel.org/r/20201130115950.22492-2-mark.rutland@arm.com
Signed-off-by: Will Deacon <will@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm64/kernel/syscall.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/arm64/kernel/syscall.c b/arch/arm64/kernel/syscall.c
index 1457a0ba83dbc..f2d2dbbbfca20 100644
--- a/arch/arm64/kernel/syscall.c
+++ b/arch/arm64/kernel/syscall.c
@@ -102,8 +102,8 @@ static void el0_svc_common(struct pt_regs *regs, int scno, int sc_nr,
 	regs->syscallno = scno;
 
 	cortex_a76_erratum_1463225_svc_handler();
+	user_exit_irqoff();
 	local_daif_restore(DAIF_PROCCTX);
-	user_exit();
 
 	if (has_syscall_work(flags)) {
 		/* set default errno for user-issued syscall(-1) */
-- 
2.27.0

[PATCH AUTOSEL 5.4 05/14] arm64: syscall: exit userspace before unmasking exceptions

[Sasha Levin]

From: Mark Rutland <mark.rutland@arm.com>

[ Upstream commit ca1314d73eed493c49bb1932c60a8605530db2e4 ]

In el0_svc_common() we unmask exceptions before we call user_exit(), and
so there's a window where an IRQ or debug exception can be taken while
RCU is not watching. In do_debug_exception() we account for this in via
debug_exception_{enter,exit}(), but in the el1_irq asm we do not and we
call trace functions which rely on RCU before we have a guarantee that
RCU is watching.

Let's avoid this by having el0_svc_common() exit userspace before
unmasking exceptions, matching what we do for all other EL0 entry paths.
We can use user_exit_irqoff() to avoid the pointless save/restore of IRQ
flags while we're sure exceptions are masked in DAIF.

The workaround for Cortex-A76 erratum 1463225 may trigger a debug
exception before this point, but the debug code invoked in this case is
safe even when RCU is not watching.

Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: James Morse <james.morse@arm.com>
Cc: Will Deacon <will@kernel.org>
Link: https://lore.kernel.org/r/20201130115950.22492-2-mark.rutland@arm.com
Signed-off-by: Will Deacon <will@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm64/kernel/syscall.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/arm64/kernel/syscall.c b/arch/arm64/kernel/syscall.c
index 1457a0ba83dbc..f2d2dbbbfca20 100644
--- a/arch/arm64/kernel/syscall.c
+++ b/arch/arm64/kernel/syscall.c
@@ -102,8 +102,8 @@ static void el0_svc_common(struct pt_regs *regs, int scno, int sc_nr,
 	regs->syscallno = scno;
 
 	cortex_a76_erratum_1463225_svc_handler();
+	user_exit_irqoff();
 	local_daif_restore(DAIF_PROCCTX);
-	user_exit();
 
 	if (has_syscall_work(flags)) {
 		/* set default errno for user-issued syscall(-1) */
-- 
2.27.0


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

[PATCH AUTOSEL 5.4 06/14] vxlan: Add needed_headroom for lower device

[Sasha Levin]

From: Sven Eckelmann <sven@narfation.org>

[ Upstream commit 0a35dc41fea67ac4495ce7584406bf9557a6e7d0 ]

It was observed that sending data via batadv over vxlan (on top of
wireguard) reduced the performance massively compared to raw ethernet or
batadv on raw ethernet. A check of perf data showed that the
vxlan_build_skb was calling all the time pskb_expand_head to allocate
enough headroom for:

  min_headroom = LL_RESERVED_SPACE(dst->dev) + dst->header_len
  		+ VXLAN_HLEN + iphdr_len;

But the vxlan_config_apply only requested needed headroom for:

  lowerdev->hard_header_len + VXLAN6_HEADROOM or VXLAN_HEADROOM

So it completely ignored the needed_headroom of the lower device. The first
caller of net_dev_xmit could therefore never make sure that enough headroom
was allocated for the rest of the transmit path.

Cc: Annika Wickert <annika.wickert@exaring.de>
Signed-off-by: Sven Eckelmann <sven@narfation.org>
Tested-by: Annika Wickert <aw@awlnx.space>
Link: https://lore.kernel.org/r/20201126125247.1047977-1-sven@narfation.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/vxlan.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/drivers/net/vxlan.c b/drivers/net/vxlan.c
index 630ac00a34ede..3753cf0942865 100644
--- a/drivers/net/vxlan.c
+++ b/drivers/net/vxlan.c
@@ -3538,6 +3538,7 @@ static void vxlan_config_apply(struct net_device *dev,
 		dev->gso_max_segs = lowerdev->gso_max_segs;
 
 		needed_headroom = lowerdev->hard_header_len;
+		needed_headroom += lowerdev->needed_headroom;
 
 		max_mtu = lowerdev->mtu - (use_ipv6 ? VXLAN6_HEADROOM :
 					   VXLAN_HEADROOM);
-- 
2.27.0

[PATCH AUTOSEL 5.4 07/14] vxlan: Copy needed_tailroom from lowerdev

[Sasha Levin]

From: Sven Eckelmann <sven@narfation.org>

[ Upstream commit a5e74021e84bb5eadf760aaf2c583304f02269be ]

While vxlan doesn't need any extra tailroom, the lowerdev might need it. In
that case, copy it over to reduce the chance for additional (re)allocations
in the transmit path.

Signed-off-by: Sven Eckelmann <sven@narfation.org>
Link: https://lore.kernel.org/r/20201126125247.1047977-2-sven@narfation.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/vxlan.c | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/drivers/net/vxlan.c b/drivers/net/vxlan.c
index 3753cf0942865..5502e145aa17b 100644
--- a/drivers/net/vxlan.c
+++ b/drivers/net/vxlan.c
@@ -3540,6 +3540,8 @@ static void vxlan_config_apply(struct net_device *dev,
 		needed_headroom = lowerdev->hard_header_len;
 		needed_headroom += lowerdev->needed_headroom;
 
+		dev->needed_tailroom = lowerdev->needed_tailroom;
+
 		max_mtu = lowerdev->mtu - (use_ipv6 ? VXLAN6_HEADROOM :
 					   VXLAN_HEADROOM);
 		if (max_mtu < ETH_MIN_MTU)
-- 
2.27.0

[PATCH AUTOSEL 5.4 08/14] scsi: storvsc: Validate length of incoming packet in storvsc_on_channel_callback()

[Sasha Levin]

From: "Andrea Parri (Microsoft)" <parri.andrea@gmail.com>

[ Upstream commit 3b8c72d076c42bf27284cda7b2b2b522810686f8 ]

Check that the packet is of the expected size at least, don't copy data
past the packet.

Link: https://lore.kernel.org/r/20201118145348.109879-1-parri.andrea@gmail.com
Cc: "James E.J. Bottomley" <jejb@linux.ibm.com>
Cc: "Martin K. Petersen" <martin.petersen@oracle.com>
Cc: linux-scsi@vger.kernel.org
Reported-by: Saruhan Karademir <skarade@microsoft.com>
Signed-off-by: Andrea Parri (Microsoft) <parri.andrea@gmail.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/scsi/storvsc_drv.c | 5 +++++
 1 file changed, 5 insertions(+)

diff --git a/drivers/scsi/storvsc_drv.c b/drivers/scsi/storvsc_drv.c
index 5087ed6afbdc3..9f78630e332f9 100644
--- a/drivers/scsi/storvsc_drv.c
+++ b/drivers/scsi/storvsc_drv.c
@@ -1170,6 +1170,11 @@ static void storvsc_on_channel_callback(void *context)
 		request = (struct storvsc_cmd_request *)
 			((unsigned long)desc->trans_id);
 
+		if (hv_pkt_datalen(desc) < sizeof(struct vstor_packet) - vmscsi_size_delta) {
+			dev_err(&device->device, "Invalid packet len\n");
+			continue;
+		}
+
 		if (request == &stor_device->init_request ||
 		    request == &stor_device->reset_request) {
 			memcpy(&request->vstor_packet, packet,
-- 
2.27.0

[PATCH AUTOSEL 5.4 08/14] scsi: storvsc: Validate length of incoming packet in storvsc_on_channel_callback()

[Sasha Levin]

From: "Andrea Parri (Microsoft)" <parri.andrea@gmail.com>

[ Upstream commit 3b8c72d076c42bf27284cda7b2b2b522810686f8 ]

Check that the packet is of the expected size at least, don't copy data
past the packet.

Link: https://lore.kernel.org/r/20201118145348.109879-1-parri.andrea@gmail.com
Cc: "James E.J. Bottomley" <jejb@linux.ibm.com>
Cc: "Martin K. Petersen" <martin.petersen@oracle.com>
Cc: linux-scsi@vger.kernel.org
Reported-by: Saruhan Karademir <skarade@microsoft.com>
Signed-off-by: Andrea Parri (Microsoft) <parri.andrea@gmail.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/scsi/storvsc_drv.c | 5 +++++
 1 file changed, 5 insertions(+)

diff --git a/drivers/scsi/storvsc_drv.c b/drivers/scsi/storvsc_drv.c
index 5087ed6afbdc3..9f78630e332f9 100644
--- a/drivers/scsi/storvsc_drv.c
+++ b/drivers/scsi/storvsc_drv.c
@@ -1170,6 +1170,11 @@ static void storvsc_on_channel_callback(void *context)
 		request = (struct storvsc_cmd_request *)
 			((unsigned long)desc->trans_id);
 
+		if (hv_pkt_datalen(desc) < sizeof(struct vstor_packet) - vmscsi_size_delta) {
+			dev_err(&device->device, "Invalid packet len\n");
+			continue;
+		}
+
 		if (request == &stor_device->init_request ||
 		    request == &stor_device->reset_request) {
 			memcpy(&request->vstor_packet, packet,
-- 
2.27.0

_______________________________________________
devel mailing list
devel@linuxdriverproject.org
http://driverdev.linuxdriverproject.org/mailman/listinfo/driverdev-devel

[PATCH AUTOSEL 5.4 09/14] scsi: mpt3sas: Increase IOCInit request timeout to 30s

[Sasha Levin]

From: Sreekanth Reddy <sreekanth.reddy@broadcom.com>

[ Upstream commit 85dad327d9b58b4c9ce08189a2707167de392d23 ]

Currently the IOCInit request message timeout is set to 10s. This is not
sufficient in some scenarios such as during HBA FW downgrade operations.

Increase the IOCInit request timeout to 30s.

Link: https://lore.kernel.org/r/20201130082733.26120-1-sreekanth.reddy@broadcom.com
Signed-off-by: Sreekanth Reddy <sreekanth.reddy@broadcom.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/scsi/mpt3sas/mpt3sas_base.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/scsi/mpt3sas/mpt3sas_base.c b/drivers/scsi/mpt3sas/mpt3sas_base.c
index 8be8c510fdf79..7532603aafb15 100644
--- a/drivers/scsi/mpt3sas/mpt3sas_base.c
+++ b/drivers/scsi/mpt3sas/mpt3sas_base.c
@@ -6227,7 +6227,7 @@ _base_send_ioc_init(struct MPT3SAS_ADAPTER *ioc)
 
 	r = _base_handshake_req_reply_wait(ioc,
 	    sizeof(Mpi2IOCInitRequest_t), (u32 *)&mpi_request,
-	    sizeof(Mpi2IOCInitReply_t), (u16 *)&mpi_reply, 10);
+	    sizeof(Mpi2IOCInitReply_t), (u16 *)&mpi_reply, 30);
 
 	if (r != 0) {
 		ioc_err(ioc, "%s: handshake failed (r=%d)\n", __func__, r);
-- 
2.27.0

[PATCH AUTOSEL 5.4 10/14] dm table: Remove BUG_ON(in_interrupt())

[Sasha Levin]

From: Thomas Gleixner <tglx@linutronix.de>

[ Upstream commit e7b624183d921b49ef0a96329f21647d38865ee9 ]

The BUG_ON(in_interrupt()) in dm_table_event() is a historic leftover from
a rework of the dm table code which changed the calling context.

Issuing a BUG for a wrong calling context is frowned upon and
in_interrupt() is deprecated and only covering parts of the wrong
contexts. The sanity check for the context is covered by
CONFIG_DEBUG_ATOMIC_SLEEP and other debug facilities already.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/md/dm-table.c | 6 ------
 1 file changed, 6 deletions(-)

diff --git a/drivers/md/dm-table.c b/drivers/md/dm-table.c
index 13ad791126618..6dd56afa048c2 100644
--- a/drivers/md/dm-table.c
+++ b/drivers/md/dm-table.c
@@ -1320,12 +1320,6 @@ void dm_table_event_callback(struct dm_table *t,
 
 void dm_table_event(struct dm_table *t)
 {
-	/*
-	 * You can no longer call dm_table_event() from interrupt
-	 * context, use a bottom half instead.
-	 */
-	BUG_ON(in_interrupt());
-
 	mutex_lock(&_event_lock);
 	if (t->event_fn)
 		t->event_fn(t->event_context);
-- 
2.27.0

[dm-devel] [PATCH AUTOSEL 5.4 10/14] dm table: Remove BUG_ON(in_interrupt())

[Sasha Levin]

From: Thomas Gleixner <tglx@linutronix.de>

[ Upstream commit e7b624183d921b49ef0a96329f21647d38865ee9 ]

The BUG_ON(in_interrupt()) in dm_table_event() is a historic leftover from
a rework of the dm table code which changed the calling context.

Issuing a BUG for a wrong calling context is frowned upon and
in_interrupt() is deprecated and only covering parts of the wrong
contexts. The sanity check for the context is covered by
CONFIG_DEBUG_ATOMIC_SLEEP and other debug facilities already.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/md/dm-table.c | 6 ------
 1 file changed, 6 deletions(-)

diff --git a/drivers/md/dm-table.c b/drivers/md/dm-table.c
index 13ad791126618..6dd56afa048c2 100644
--- a/drivers/md/dm-table.c
+++ b/drivers/md/dm-table.c
@@ -1320,12 +1320,6 @@ void dm_table_event_callback(struct dm_table *t,
 
 void dm_table_event(struct dm_table *t)
 {
-	/*
-	 * You can no longer call dm_table_event() from interrupt
-	 * context, use a bottom half instead.
-	 */
-	BUG_ON(in_interrupt());
-
 	mutex_lock(&_event_lock);
 	if (t->event_fn)
 		t->event_fn(t->event_context);
-- 
2.27.0


--
dm-devel mailing list
dm-devel@redhat.com
https://www.redhat.com/mailman/listinfo/dm-devel

[PATCH AUTOSEL 5.4 11/14] iwlwifi: pcie: add one missing entry for AX210

[Sasha Levin]

From: Luca Coelho <luciano.coelho@intel.com>

[ Upstream commit 5febcdef30902fa870128b9789b873199f13aff1 ]

The 0x0024 subsytem device ID was missing from the list, so some AX210
devices were not recognized.  Add it.

Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/iwlwifi.20201202143859.308eab4db42c.I3763196cd3f7bb36f3dcabf02ec4e7c4fe859c0f@changeid
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/wireless/intel/iwlwifi/pcie/drv.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/drivers/net/wireless/intel/iwlwifi/pcie/drv.c b/drivers/net/wireless/intel/iwlwifi/pcie/drv.c
index b0b7eca1754ed..f34297fd453c0 100644
--- a/drivers/net/wireless/intel/iwlwifi/pcie/drv.c
+++ b/drivers/net/wireless/intel/iwlwifi/pcie/drv.c
@@ -968,6 +968,7 @@ static const struct pci_device_id iwl_hw_card_ids[] = {
 
 	{IWL_PCI_DEVICE(0x2725, 0x0090, iwlax211_2ax_cfg_so_gf_a0)},
 	{IWL_PCI_DEVICE(0x2725, 0x0020, iwlax210_2ax_cfg_ty_gf_a0)},
+	{IWL_PCI_DEVICE(0x2725, 0x0024, iwlax210_2ax_cfg_ty_gf_a0)},
 	{IWL_PCI_DEVICE(0x2725, 0x0310, iwlax210_2ax_cfg_ty_gf_a0)},
 	{IWL_PCI_DEVICE(0x2725, 0x0510, iwlax210_2ax_cfg_ty_gf_a0)},
 	{IWL_PCI_DEVICE(0x2725, 0x0A10, iwlax210_2ax_cfg_ty_gf_a0)},
-- 
2.27.0

[PATCH AUTOSEL 5.4 12/14] drm/amd/display: Init clock value by current vbios CLKs

[Sasha Levin]

From: Brandon Syu <Brandon.Syu@amd.com>

[ Upstream commit 7e0b367db85ef7b91399006253759a024eab7653 ]

[Why]
While booting into OS, driver updates DPP/DISP CLKs.
But init clock value is zero which is invalid.

[How]
Get current clocks value to update init clocks.
To avoid underflow.

Signed-off-by: Brandon Syu <Brandon.Syu@amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng@amd.com>
Acked-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 .../drm/amd/display/dc/clk_mgr/dcn21/rn_clk_mgr.c   | 13 +++++++++++--
 1 file changed, 11 insertions(+), 2 deletions(-)

diff --git a/drivers/gpu/drm/amd/display/dc/clk_mgr/dcn21/rn_clk_mgr.c b/drivers/gpu/drm/amd/display/dc/clk_mgr/dcn21/rn_clk_mgr.c
index dd92f9c295b45..9f301f8575a54 100644
--- a/drivers/gpu/drm/amd/display/dc/clk_mgr/dcn21/rn_clk_mgr.c
+++ b/drivers/gpu/drm/amd/display/dc/clk_mgr/dcn21/rn_clk_mgr.c
@@ -97,8 +97,17 @@ void rn_update_clocks(struct clk_mgr *clk_mgr_base,
 			new_clocks->dppclk_khz = 100000;
 	}
 
-	if (should_set_clock(safe_to_lower, new_clocks->dppclk_khz, clk_mgr->base.clks.dppclk_khz)) {
-		if (clk_mgr->base.clks.dppclk_khz > new_clocks->dppclk_khz)
+	/*
+	 * Temporally ignore thew 0 cases for disp and dpp clks.
+	 * We may have a new feature that requires 0 clks in the future.
+	 */
+	if (new_clocks->dppclk_khz == 0 || new_clocks->dispclk_khz == 0) {
+		new_clocks->dppclk_khz = clk_mgr_base->clks.dppclk_khz;
+		new_clocks->dispclk_khz = clk_mgr_base->clks.dispclk_khz;
+	}
+
+	if (should_set_clock(safe_to_lower, new_clocks->dppclk_khz, clk_mgr_base->clks.dppclk_khz)) {
+		if (clk_mgr_base->clks.dppclk_khz > new_clocks->dppclk_khz)
 			dpp_clock_lowered = true;
 		clk_mgr_base->clks.dppclk_khz = new_clocks->dppclk_khz;
 		update_dppclk = true;
-- 
2.27.0

[PATCH AUTOSEL 5.4 12/14] drm/amd/display: Init clock value by current vbios CLKs

[Sasha Levin]

From: Brandon Syu <Brandon.Syu@amd.com>

[ Upstream commit 7e0b367db85ef7b91399006253759a024eab7653 ]

[Why]
While booting into OS, driver updates DPP/DISP CLKs.
But init clock value is zero which is invalid.

[How]
Get current clocks value to update init clocks.
To avoid underflow.

Signed-off-by: Brandon Syu <Brandon.Syu@amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng@amd.com>
Acked-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 .../drm/amd/display/dc/clk_mgr/dcn21/rn_clk_mgr.c   | 13 +++++++++++--
 1 file changed, 11 insertions(+), 2 deletions(-)

diff --git a/drivers/gpu/drm/amd/display/dc/clk_mgr/dcn21/rn_clk_mgr.c b/drivers/gpu/drm/amd/display/dc/clk_mgr/dcn21/rn_clk_mgr.c
index dd92f9c295b45..9f301f8575a54 100644
--- a/drivers/gpu/drm/amd/display/dc/clk_mgr/dcn21/rn_clk_mgr.c
+++ b/drivers/gpu/drm/amd/display/dc/clk_mgr/dcn21/rn_clk_mgr.c
@@ -97,8 +97,17 @@ void rn_update_clocks(struct clk_mgr *clk_mgr_base,
 			new_clocks->dppclk_khz = 100000;
 	}
 
-	if (should_set_clock(safe_to_lower, new_clocks->dppclk_khz, clk_mgr->base.clks.dppclk_khz)) {
-		if (clk_mgr->base.clks.dppclk_khz > new_clocks->dppclk_khz)
+	/*
+	 * Temporally ignore thew 0 cases for disp and dpp clks.
+	 * We may have a new feature that requires 0 clks in the future.
+	 */
+	if (new_clocks->dppclk_khz == 0 || new_clocks->dispclk_khz == 0) {
+		new_clocks->dppclk_khz = clk_mgr_base->clks.dppclk_khz;
+		new_clocks->dispclk_khz = clk_mgr_base->clks.dispclk_khz;
+	}
+
+	if (should_set_clock(safe_to_lower, new_clocks->dppclk_khz, clk_mgr_base->clks.dppclk_khz)) {
+		if (clk_mgr_base->clks.dppclk_khz > new_clocks->dppclk_khz)
 			dpp_clock_lowered = true;
 		clk_mgr_base->clks.dppclk_khz = new_clocks->dppclk_khz;
 		update_dppclk = true;
-- 
2.27.0

_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel

[PATCH AUTOSEL 5.4 13/14] perf/x86/intel: Check PEBS status correctly

[Sasha Levin]

From: Stephane Eranian <eranian@google.com>

[ Upstream commit fc17db8aa4c53cbd2d5469bb0521ea0f0a6dbb27 ]

The kernel cannot disambiguate when 2+ PEBS counters overflow at the
same time. This is what the comment for this code suggests.  However,
I see the comparison is done with the unfiltered p->status which is a
copy of IA32_PERF_GLOBAL_STATUS at the time of the sample. This
register contains more than the PEBS counter overflow bits. It also
includes many other bits which could also be set.

Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Signed-off-by: Stephane Eranian <eranian@google.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/20201126110922.317681-2-namhyung@kernel.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/x86/events/intel/ds.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/x86/events/intel/ds.c b/arch/x86/events/intel/ds.c
index 1aaba2c8a9ba6..eb8bd0eeace7d 100644
--- a/arch/x86/events/intel/ds.c
+++ b/arch/x86/events/intel/ds.c
@@ -1912,7 +1912,7 @@ static void intel_pmu_drain_pebs_nhm(struct pt_regs *iregs)
 		 * that caused the PEBS record. It's called collision.
 		 * If collision happened, the record will be dropped.
 		 */
-		if (p->status != (1ULL << bit)) {
+		if (pebs_status != (1ULL << bit)) {
 			for_each_set_bit(i, (unsigned long *)&pebs_status, size)
 				error[i]++;
 			continue;
-- 
2.27.0

[PATCH AUTOSEL 5.4 14/14] kbuild: avoid split lines in .mod files

[Sasha Levin]

From: Masahiro Yamada <masahiroy@kernel.org>

[ Upstream commit 7d32358be8acb119dcfe39b6cf67ec6d94bf1fe7 ]

"xargs echo" is not a safe way to remove line breaks because the input
may exceed the command line limit and xargs may break it up into
multiple invocations of echo. This should never happen because
scripts/gen_autoksyms.sh expects all undefined symbols are placed in
the second line of .mod files.

One possible way is to replace "xargs echo" with
"sed ':x;N;$!bx;s/\n/ /g'" or something, but I rewrote the code by
using awk because it is more readable.

This issue was reported by Sami Tolvanen; in his Clang LTO patch set,
$(multi-used-m) is no longer an ELF object, but a thin archive that
contains LLVM bitcode files. llvm-nm prints out symbols for each
archive member separately, which results a lot of dupications, in some
places, beyond the system-defined limit.

This problem must be fixed irrespective of LTO, and we must ensure
zero possibility of having this issue.

Link: https://lkml.org/lkml/2020/12/1/1658
Reported-by: Sami Tolvanen <samitolvanen@google.com>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Reviewed-by: Sami Tolvanen <samitolvanen@google.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 scripts/Makefile.build | 12 ++++--------
 1 file changed, 4 insertions(+), 8 deletions(-)

diff --git a/scripts/Makefile.build b/scripts/Makefile.build
index 24a33c01bbf7c..9c689d011bced 100644
--- a/scripts/Makefile.build
+++ b/scripts/Makefile.build
@@ -234,6 +234,9 @@ objtool_dep = $(objtool_obj)					\
 ifdef CONFIG_TRIM_UNUSED_KSYMS
 cmd_gen_ksymdeps = \
 	$(CONFIG_SHELL) $(srctree)/scripts/gen_ksymdeps.sh $@ >> $(dot-target).cmd
+
+# List module undefined symbols
+undefined_syms = $(NM) $< | $(AWK) '$$1 == "U" { printf("%s%s", x++ ? " " : "", $$2) }';
 endif
 
 define rule_cc_o_c
@@ -253,13 +256,6 @@ define rule_as_o_S
 	$(call cmd,modversions_S)
 endef
 
-# List module undefined symbols (or empty line if not enabled)
-ifdef CONFIG_TRIM_UNUSED_KSYMS
-cmd_undef_syms = $(NM) $< | sed -n 's/^  *U //p' | xargs echo
-else
-cmd_undef_syms = echo
-endif
-
 # Built-in and composite module parts
 $(obj)/%.o: $(src)/%.c $(recordmcount_source) $(objtool_dep) FORCE
 	$(call cmd,force_checksrc)
@@ -267,7 +263,7 @@ $(obj)/%.o: $(src)/%.c $(recordmcount_source) $(objtool_dep) FORCE
 
 cmd_mod = { \
 	echo $(if $($*-objs)$($*-y)$($*-m), $(addprefix $(obj)/, $($*-objs) $($*-y) $($*-m)), $(@:.mod=.o)); \
-	$(cmd_undef_syms); \
+	$(undefined_syms) echo; \
 	} > $@
 
 $(obj)/%.mod: $(obj)/%.o FORCE
-- 
2.27.0