[PATCH AUTOSEL 4.19 1/9] drm/tegra: replace idr_init() by idr_init_base()

[PATCH AUTOSEL 4.19 1/9] drm/tegra: replace idr_init() by idr_init_base()

[Sasha Levin]

From: Deepak R Varma <mh12gx2825@gmail.com>

[ Upstream commit 41f71629b4c432f8dd47d70ace813be5f79d4d75 ]

idr_init() uses base 0 which is an invalid identifier for this driver.
The new function idr_init_base allows IDR to set the ID lookup from
base 1. This avoids all lookups that otherwise starts from 0 since
0 is always unused.

References: commit 6ce711f27500 ("idr: Make 1-based IDRs more efficient")

Signed-off-by: Deepak R Varma <mh12gx2825@gmail.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/gpu/drm/tegra/drm.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/gpu/drm/tegra/drm.c b/drivers/gpu/drm/tegra/drm.c
index a2bd5876c6335..00808a3d67832 100644
--- a/drivers/gpu/drm/tegra/drm.c
+++ b/drivers/gpu/drm/tegra/drm.c
@@ -242,7 +242,7 @@ static int tegra_drm_open(struct drm_device *drm, struct drm_file *filp)
 	if (!fpriv)
 		return -ENOMEM;
 
-	idr_init(&fpriv->contexts);
+	idr_init_base(&fpriv->contexts, 1);
 	mutex_init(&fpriv->lock);
 	filp->driver_priv = fpriv;
 
-- 
2.27.0

[PATCH AUTOSEL 4.19 1/9] drm/tegra: replace idr_init() by idr_init_base()

[Sasha Levin]

From: Deepak R Varma <mh12gx2825@gmail.com>

[ Upstream commit 41f71629b4c432f8dd47d70ace813be5f79d4d75 ]

idr_init() uses base 0 which is an invalid identifier for this driver.
The new function idr_init_base allows IDR to set the ID lookup from
base 1. This avoids all lookups that otherwise starts from 0 since
0 is always unused.

References: commit 6ce711f27500 ("idr: Make 1-based IDRs more efficient")

Signed-off-by: Deepak R Varma <mh12gx2825@gmail.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/gpu/drm/tegra/drm.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/gpu/drm/tegra/drm.c b/drivers/gpu/drm/tegra/drm.c
index a2bd5876c6335..00808a3d67832 100644
--- a/drivers/gpu/drm/tegra/drm.c
+++ b/drivers/gpu/drm/tegra/drm.c
@@ -242,7 +242,7 @@ static int tegra_drm_open(struct drm_device *drm, struct drm_file *filp)
 	if (!fpriv)
 		return -ENOMEM;
 
-	idr_init(&fpriv->contexts);
+	idr_init_base(&fpriv->contexts, 1);
 	mutex_init(&fpriv->lock);
 	filp->driver_priv = fpriv;
 
-- 
2.27.0

_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel

[PATCH AUTOSEL 4.19 2/9] kernel/cpu: add arch override for clear_tasks_mm_cpumask() mm handling

[Sasha Levin]

From: Nicholas Piggin <npiggin@gmail.com>

[ Upstream commit 8ff00399b153440c1c83e20c43020385b416415b ]

powerpc/64s keeps a counter in the mm which counts bits set in
mm_cpumask as well as other things. This means it can't use generic code
to clear bits out of the mask and doesn't adjust the arch specific
counter.

Add an arch override that allows powerpc/64s to use
clear_tasks_mm_cpumask().

Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Reviewed-by: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20201126102530.691335-4-npiggin@gmail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 kernel/cpu.c | 6 +++++-
 1 file changed, 5 insertions(+), 1 deletion(-)

diff --git a/kernel/cpu.c b/kernel/cpu.c
index 08b9d6ba0807f..9a39a24f60253 100644
--- a/kernel/cpu.c
+++ b/kernel/cpu.c
@@ -776,6 +776,10 @@ void __init cpuhp_threads_init(void)
 }
 
 #ifdef CONFIG_HOTPLUG_CPU
+#ifndef arch_clear_mm_cpumask_cpu
+#define arch_clear_mm_cpumask_cpu(cpu, mm) cpumask_clear_cpu(cpu, mm_cpumask(mm))
+#endif
+
 /**
  * clear_tasks_mm_cpumask - Safely clear tasks' mm_cpumask for a CPU
  * @cpu: a CPU id
@@ -811,7 +815,7 @@ void clear_tasks_mm_cpumask(int cpu)
 		t = find_lock_task_mm(p);
 		if (!t)
 			continue;
-		cpumask_clear_cpu(cpu, mm_cpumask(t->mm));
+		arch_clear_mm_cpumask_cpu(cpu, t->mm);
 		task_unlock(t);
 	}
 	rcu_read_unlock();
-- 
2.27.0

[PATCH AUTOSEL 4.19 3/9] drm/tegra: sor: Disable clocks on error in tegra_sor_init()

[Sasha Levin]

From: Qinglang Miao <miaoqinglang@huawei.com>

[ Upstream commit bf3a3cdcad40e5928a22ea0fd200d17fd6d6308d ]

Fix the missing clk_disable_unprepare() before return from
tegra_sor_init() in the error handling case.

Signed-off-by: Qinglang Miao <miaoqinglang@huawei.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/gpu/drm/tegra/sor.c | 10 ++++++++--
 1 file changed, 8 insertions(+), 2 deletions(-)

diff --git a/drivers/gpu/drm/tegra/sor.c b/drivers/gpu/drm/tegra/sor.c
index 89cb70da2bfe6..83108e2430501 100644
--- a/drivers/gpu/drm/tegra/sor.c
+++ b/drivers/gpu/drm/tegra/sor.c
@@ -2668,17 +2668,23 @@ static int tegra_sor_init(struct host1x_client *client)
 		if (err < 0) {
 			dev_err(sor->dev, "failed to deassert SOR reset: %d\n",
 				err);
+			clk_disable_unprepare(sor->clk);
 			return err;
 		}
 	}
 
 	err = clk_prepare_enable(sor->clk_safe);
-	if (err < 0)
+	if (err < 0) {
+		clk_disable_unprepare(sor->clk);
 		return err;
+	}
 
 	err = clk_prepare_enable(sor->clk_dp);
-	if (err < 0)
+	if (err < 0) {
+		clk_disable_unprepare(sor->clk_safe);
+		clk_disable_unprepare(sor->clk);
 		return err;
+	}
 
 	return 0;
 }
-- 
2.27.0

[PATCH AUTOSEL 4.19 3/9] drm/tegra: sor: Disable clocks on error in tegra_sor_init()

[Sasha Levin]

From: Qinglang Miao <miaoqinglang@huawei.com>

[ Upstream commit bf3a3cdcad40e5928a22ea0fd200d17fd6d6308d ]

Fix the missing clk_disable_unprepare() before return from
tegra_sor_init() in the error handling case.

Signed-off-by: Qinglang Miao <miaoqinglang@huawei.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/gpu/drm/tegra/sor.c | 10 ++++++++--
 1 file changed, 8 insertions(+), 2 deletions(-)

diff --git a/drivers/gpu/drm/tegra/sor.c b/drivers/gpu/drm/tegra/sor.c
index 89cb70da2bfe6..83108e2430501 100644
--- a/drivers/gpu/drm/tegra/sor.c
+++ b/drivers/gpu/drm/tegra/sor.c
@@ -2668,17 +2668,23 @@ static int tegra_sor_init(struct host1x_client *client)
 		if (err < 0) {
 			dev_err(sor->dev, "failed to deassert SOR reset: %d\n",
 				err);
+			clk_disable_unprepare(sor->clk);
 			return err;
 		}
 	}
 
 	err = clk_prepare_enable(sor->clk_safe);
-	if (err < 0)
+	if (err < 0) {
+		clk_disable_unprepare(sor->clk);
 		return err;
+	}
 
 	err = clk_prepare_enable(sor->clk_dp);
-	if (err < 0)
+	if (err < 0) {
+		clk_disable_unprepare(sor->clk_safe);
+		clk_disable_unprepare(sor->clk);
 		return err;
+	}
 
 	return 0;
 }
-- 
2.27.0

_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel

[PATCH AUTOSEL 4.19 4/9] arm64: syscall: exit userspace before unmasking exceptions

[Sasha Levin]

From: Mark Rutland <mark.rutland@arm.com>

[ Upstream commit ca1314d73eed493c49bb1932c60a8605530db2e4 ]

In el0_svc_common() we unmask exceptions before we call user_exit(), and
so there's a window where an IRQ or debug exception can be taken while
RCU is not watching. In do_debug_exception() we account for this in via
debug_exception_{enter,exit}(), but in the el1_irq asm we do not and we
call trace functions which rely on RCU before we have a guarantee that
RCU is watching.

Let's avoid this by having el0_svc_common() exit userspace before
unmasking exceptions, matching what we do for all other EL0 entry paths.
We can use user_exit_irqoff() to avoid the pointless save/restore of IRQ
flags while we're sure exceptions are masked in DAIF.

The workaround for Cortex-A76 erratum 1463225 may trigger a debug
exception before this point, but the debug code invoked in this case is
safe even when RCU is not watching.

Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: James Morse <james.morse@arm.com>
Cc: Will Deacon <will@kernel.org>
Link: https://lore.kernel.org/r/20201130115950.22492-2-mark.rutland@arm.com
Signed-off-by: Will Deacon <will@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm64/kernel/syscall.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/arm64/kernel/syscall.c b/arch/arm64/kernel/syscall.c
index 1457a0ba83dbc..f2d2dbbbfca20 100644
--- a/arch/arm64/kernel/syscall.c
+++ b/arch/arm64/kernel/syscall.c
@@ -102,8 +102,8 @@ static void el0_svc_common(struct pt_regs *regs, int scno, int sc_nr,
 	regs->syscallno = scno;
 
 	cortex_a76_erratum_1463225_svc_handler();
+	user_exit_irqoff();
 	local_daif_restore(DAIF_PROCCTX);
-	user_exit();
 
 	if (has_syscall_work(flags)) {
 		/* set default errno for user-issued syscall(-1) */
-- 
2.27.0

[PATCH AUTOSEL 4.19 4/9] arm64: syscall: exit userspace before unmasking exceptions

[Sasha Levin]

From: Mark Rutland <mark.rutland@arm.com>

[ Upstream commit ca1314d73eed493c49bb1932c60a8605530db2e4 ]

In el0_svc_common() we unmask exceptions before we call user_exit(), and
so there's a window where an IRQ or debug exception can be taken while
RCU is not watching. In do_debug_exception() we account for this in via
debug_exception_{enter,exit}(), but in the el1_irq asm we do not and we
call trace functions which rely on RCU before we have a guarantee that
RCU is watching.

Let's avoid this by having el0_svc_common() exit userspace before
unmasking exceptions, matching what we do for all other EL0 entry paths.
We can use user_exit_irqoff() to avoid the pointless save/restore of IRQ
flags while we're sure exceptions are masked in DAIF.

The workaround for Cortex-A76 erratum 1463225 may trigger a debug
exception before this point, but the debug code invoked in this case is
safe even when RCU is not watching.

Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: James Morse <james.morse@arm.com>
Cc: Will Deacon <will@kernel.org>
Link: https://lore.kernel.org/r/20201130115950.22492-2-mark.rutland@arm.com
Signed-off-by: Will Deacon <will@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm64/kernel/syscall.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/arm64/kernel/syscall.c b/arch/arm64/kernel/syscall.c
index 1457a0ba83dbc..f2d2dbbbfca20 100644
--- a/arch/arm64/kernel/syscall.c
+++ b/arch/arm64/kernel/syscall.c
@@ -102,8 +102,8 @@ static void el0_svc_common(struct pt_regs *regs, int scno, int sc_nr,
 	regs->syscallno = scno;
 
 	cortex_a76_erratum_1463225_svc_handler();
+	user_exit_irqoff();
 	local_daif_restore(DAIF_PROCCTX);
-	user_exit();
 
 	if (has_syscall_work(flags)) {
 		/* set default errno for user-issued syscall(-1) */
-- 
2.27.0


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

[PATCH AUTOSEL 4.19 5/9] vxlan: Add needed_headroom for lower device

[Sasha Levin]

From: Sven Eckelmann <sven@narfation.org>

[ Upstream commit 0a35dc41fea67ac4495ce7584406bf9557a6e7d0 ]

It was observed that sending data via batadv over vxlan (on top of
wireguard) reduced the performance massively compared to raw ethernet or
batadv on raw ethernet. A check of perf data showed that the
vxlan_build_skb was calling all the time pskb_expand_head to allocate
enough headroom for:

  min_headroom = LL_RESERVED_SPACE(dst->dev) + dst->header_len
  		+ VXLAN_HLEN + iphdr_len;

But the vxlan_config_apply only requested needed headroom for:

  lowerdev->hard_header_len + VXLAN6_HEADROOM or VXLAN_HEADROOM

So it completely ignored the needed_headroom of the lower device. The first
caller of net_dev_xmit could therefore never make sure that enough headroom
was allocated for the rest of the transmit path.

Cc: Annika Wickert <annika.wickert@exaring.de>
Signed-off-by: Sven Eckelmann <sven@narfation.org>
Tested-by: Annika Wickert <aw@awlnx.space>
Link: https://lore.kernel.org/r/20201126125247.1047977-1-sven@narfation.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/vxlan.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/drivers/net/vxlan.c b/drivers/net/vxlan.c
index abf85f0ab72fc..8481a21fe7afb 100644
--- a/drivers/net/vxlan.c
+++ b/drivers/net/vxlan.c
@@ -3180,6 +3180,7 @@ static void vxlan_config_apply(struct net_device *dev,
 		dev->gso_max_segs = lowerdev->gso_max_segs;
 
 		needed_headroom = lowerdev->hard_header_len;
+		needed_headroom += lowerdev->needed_headroom;
 
 		max_mtu = lowerdev->mtu - (use_ipv6 ? VXLAN6_HEADROOM :
 					   VXLAN_HEADROOM);
-- 
2.27.0

[PATCH AUTOSEL 4.19 6/9] vxlan: Copy needed_tailroom from lowerdev

[Sasha Levin]

From: Sven Eckelmann <sven@narfation.org>

[ Upstream commit a5e74021e84bb5eadf760aaf2c583304f02269be ]

While vxlan doesn't need any extra tailroom, the lowerdev might need it. In
that case, copy it over to reduce the chance for additional (re)allocations
in the transmit path.

Signed-off-by: Sven Eckelmann <sven@narfation.org>
Link: https://lore.kernel.org/r/20201126125247.1047977-2-sven@narfation.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/vxlan.c | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/drivers/net/vxlan.c b/drivers/net/vxlan.c
index 8481a21fe7afb..66fffbd64a33f 100644
--- a/drivers/net/vxlan.c
+++ b/drivers/net/vxlan.c
@@ -3182,6 +3182,8 @@ static void vxlan_config_apply(struct net_device *dev,
 		needed_headroom = lowerdev->hard_header_len;
 		needed_headroom += lowerdev->needed_headroom;
 
+		dev->needed_tailroom = lowerdev->needed_tailroom;
+
 		max_mtu = lowerdev->mtu - (use_ipv6 ? VXLAN6_HEADROOM :
 					   VXLAN_HEADROOM);
 		if (max_mtu < ETH_MIN_MTU)
-- 
2.27.0

[PATCH AUTOSEL 4.19 7/9] scsi: storvsc: Validate length of incoming packet in storvsc_on_channel_callback()

[Sasha Levin]

From: "Andrea Parri (Microsoft)" <parri.andrea@gmail.com>

[ Upstream commit 3b8c72d076c42bf27284cda7b2b2b522810686f8 ]

Check that the packet is of the expected size at least, don't copy data
past the packet.

Link: https://lore.kernel.org/r/20201118145348.109879-1-parri.andrea@gmail.com
Cc: "James E.J. Bottomley" <jejb@linux.ibm.com>
Cc: "Martin K. Petersen" <martin.petersen@oracle.com>
Cc: linux-scsi@vger.kernel.org
Reported-by: Saruhan Karademir <skarade@microsoft.com>
Signed-off-by: Andrea Parri (Microsoft) <parri.andrea@gmail.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/scsi/storvsc_drv.c | 5 +++++
 1 file changed, 5 insertions(+)

diff --git a/drivers/scsi/storvsc_drv.c b/drivers/scsi/storvsc_drv.c
index 0c2ba075bc713..d6ccfcdbc323f 100644
--- a/drivers/scsi/storvsc_drv.c
+++ b/drivers/scsi/storvsc_drv.c
@@ -1181,6 +1181,11 @@ static void storvsc_on_channel_callback(void *context)
 		request = (struct storvsc_cmd_request *)
 			((unsigned long)desc->trans_id);
 
+		if (hv_pkt_datalen(desc) < sizeof(struct vstor_packet) - vmscsi_size_delta) {
+			dev_err(&device->device, "Invalid packet len\n");
+			continue;
+		}
+
 		if (request == &stor_device->init_request ||
 		    request == &stor_device->reset_request) {
 			memcpy(&request->vstor_packet, packet,
-- 
2.27.0

[PATCH AUTOSEL 4.19 7/9] scsi: storvsc: Validate length of incoming packet in storvsc_on_channel_callback()

[Sasha Levin]

From: "Andrea Parri (Microsoft)" <parri.andrea@gmail.com>

[ Upstream commit 3b8c72d076c42bf27284cda7b2b2b522810686f8 ]

Check that the packet is of the expected size at least, don't copy data
past the packet.

Link: https://lore.kernel.org/r/20201118145348.109879-1-parri.andrea@gmail.com
Cc: "James E.J. Bottomley" <jejb@linux.ibm.com>
Cc: "Martin K. Petersen" <martin.petersen@oracle.com>
Cc: linux-scsi@vger.kernel.org
Reported-by: Saruhan Karademir <skarade@microsoft.com>
Signed-off-by: Andrea Parri (Microsoft) <parri.andrea@gmail.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/scsi/storvsc_drv.c | 5 +++++
 1 file changed, 5 insertions(+)

diff --git a/drivers/scsi/storvsc_drv.c b/drivers/scsi/storvsc_drv.c
index 0c2ba075bc713..d6ccfcdbc323f 100644
--- a/drivers/scsi/storvsc_drv.c
+++ b/drivers/scsi/storvsc_drv.c
@@ -1181,6 +1181,11 @@ static void storvsc_on_channel_callback(void *context)
 		request = (struct storvsc_cmd_request *)
 			((unsigned long)desc->trans_id);
 
+		if (hv_pkt_datalen(desc) < sizeof(struct vstor_packet) - vmscsi_size_delta) {
+			dev_err(&device->device, "Invalid packet len\n");
+			continue;
+		}
+
 		if (request == &stor_device->init_request ||
 		    request == &stor_device->reset_request) {
 			memcpy(&request->vstor_packet, packet,
-- 
2.27.0

_______________________________________________
devel mailing list
devel@linuxdriverproject.org
http://driverdev.linuxdriverproject.org/mailman/listinfo/driverdev-devel

[PATCH AUTOSEL 4.19 8/9] scsi: mpt3sas: Increase IOCInit request timeout to 30s

[Sasha Levin]

From: Sreekanth Reddy <sreekanth.reddy@broadcom.com>

[ Upstream commit 85dad327d9b58b4c9ce08189a2707167de392d23 ]

Currently the IOCInit request message timeout is set to 10s. This is not
sufficient in some scenarios such as during HBA FW downgrade operations.

Increase the IOCInit request timeout to 30s.

Link: https://lore.kernel.org/r/20201130082733.26120-1-sreekanth.reddy@broadcom.com
Signed-off-by: Sreekanth Reddy <sreekanth.reddy@broadcom.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/scsi/mpt3sas/mpt3sas_base.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/scsi/mpt3sas/mpt3sas_base.c b/drivers/scsi/mpt3sas/mpt3sas_base.c
index 9fbe20e38ad07..07959047d4dc4 100644
--- a/drivers/scsi/mpt3sas/mpt3sas_base.c
+++ b/drivers/scsi/mpt3sas/mpt3sas_base.c
@@ -5771,7 +5771,7 @@ _base_send_ioc_init(struct MPT3SAS_ADAPTER *ioc)
 
 	r = _base_handshake_req_reply_wait(ioc,
 	    sizeof(Mpi2IOCInitRequest_t), (u32 *)&mpi_request,
-	    sizeof(Mpi2IOCInitReply_t), (u16 *)&mpi_reply, 10);
+	    sizeof(Mpi2IOCInitReply_t), (u16 *)&mpi_reply, 30);
 
 	if (r != 0) {
 		pr_err(MPT3SAS_FMT "%s: handshake failed (r=%d)\n",
-- 
2.27.0

[PATCH AUTOSEL 4.19 9/9] dm table: Remove BUG_ON(in_interrupt())

[Sasha Levin]

From: Thomas Gleixner <tglx@linutronix.de>

[ Upstream commit e7b624183d921b49ef0a96329f21647d38865ee9 ]

The BUG_ON(in_interrupt()) in dm_table_event() is a historic leftover from
a rework of the dm table code which changed the calling context.

Issuing a BUG for a wrong calling context is frowned upon and
in_interrupt() is deprecated and only covering parts of the wrong
contexts. The sanity check for the context is covered by
CONFIG_DEBUG_ATOMIC_SLEEP and other debug facilities already.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/md/dm-table.c | 6 ------
 1 file changed, 6 deletions(-)

diff --git a/drivers/md/dm-table.c b/drivers/md/dm-table.c
index 36275c59e4e7b..f849db3035a05 100644
--- a/drivers/md/dm-table.c
+++ b/drivers/md/dm-table.c
@@ -1336,12 +1336,6 @@ void dm_table_event_callback(struct dm_table *t,
 
 void dm_table_event(struct dm_table *t)
 {
-	/*
-	 * You can no longer call dm_table_event() from interrupt
-	 * context, use a bottom half instead.
-	 */
-	BUG_ON(in_interrupt());
-
 	mutex_lock(&_event_lock);
 	if (t->event_fn)
 		t->event_fn(t->event_context);
-- 
2.27.0

[dm-devel] [PATCH AUTOSEL 4.19 9/9] dm table: Remove BUG_ON(in_interrupt())

[Sasha Levin]

From: Thomas Gleixner <tglx@linutronix.de>

[ Upstream commit e7b624183d921b49ef0a96329f21647d38865ee9 ]

The BUG_ON(in_interrupt()) in dm_table_event() is a historic leftover from
a rework of the dm table code which changed the calling context.

Issuing a BUG for a wrong calling context is frowned upon and
in_interrupt() is deprecated and only covering parts of the wrong
contexts. The sanity check for the context is covered by
CONFIG_DEBUG_ATOMIC_SLEEP and other debug facilities already.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/md/dm-table.c | 6 ------
 1 file changed, 6 deletions(-)

diff --git a/drivers/md/dm-table.c b/drivers/md/dm-table.c
index 36275c59e4e7b..f849db3035a05 100644
--- a/drivers/md/dm-table.c
+++ b/drivers/md/dm-table.c
@@ -1336,12 +1336,6 @@ void dm_table_event_callback(struct dm_table *t,
 
 void dm_table_event(struct dm_table *t)
 {
-	/*
-	 * You can no longer call dm_table_event() from interrupt
-	 * context, use a bottom half instead.
-	 */
-	BUG_ON(in_interrupt());
-
 	mutex_lock(&_event_lock);
 	if (t->event_fn)
 		t->event_fn(t->event_context);
-- 
2.27.0


--
dm-devel mailing list
dm-devel@redhat.com
https://www.redhat.com/mailman/listinfo/dm-devel