From: Damien Le Moal <damien.lemoal@wdc.com> To: Palmer Dabbelt <palmer@dabbelt.com>, linux-riscv@lists.infradead.org, Rob Herring <robh+dt@kernel.org>, devicetree@vger.kernel.org, Stephen Boyd <sboyd@kernel.org>, linux-clk@vger.kernel.org, Linus Walleij <linus.walleij@linaro.org>, linux-gpio@vger.kernel.org, Philipp Zabel <p.zabel@pengutronix.de> Cc: Sean Anderson <seanga2@gmail.com> Subject: [PATCH v10 18/23] riscv: Add SiPeed MAIX DOCK board device tree Date: Sun, 13 Dec 2020 22:50:51 +0900 [thread overview] Message-ID: <20201213135056.24446-19-damien.lemoal@wdc.com> (raw) In-Reply-To: <20201213135056.24446-1-damien.lemoal@wdc.com> Add a device tree for the SiPeed MAIX DOCK m1 and m1w boards. This device tree enables LEDs, gpio, i2c and spi/mmc SD card devices. Signed-off-by: Damien Le Moal <damien.lemoal@wdc.com> --- arch/riscv/boot/dts/canaan/k210_maix_dock.dts | 229 ++++++++++++++++++ 1 file changed, 229 insertions(+) create mode 100644 arch/riscv/boot/dts/canaan/k210_maix_dock.dts diff --git a/arch/riscv/boot/dts/canaan/k210_maix_dock.dts b/arch/riscv/boot/dts/canaan/k210_maix_dock.dts new file mode 100644 index 000000000000..abeaa9bad761 --- /dev/null +++ b/arch/riscv/boot/dts/canaan/k210_maix_dock.dts @@ -0,0 +1,229 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * Copyright (C) 2019-20 Sean Anderson <seanga2@gmail.com> + * Copyright (C) 2020 Western Digital Corporation or its affiliates. + */ + +/dts-v1/; + +#include "k210.dtsi" + +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/input/input.h> + +/ { + model = "SiPeed MAIX Dock"; + compatible = "sipeed,maix-dock-m1wm", "sipeed,maix-dock-m1", + "canaan,kendryte-k210"; + + chosen { + bootargs = "earlycon console=ttySIF0"; + stdout-path = "serial0:115200n8"; + }; + + gpio-leds { + compatible = "gpio-leds"; + + /* + * Note: the board specification document green on gpio #4, + * red on gpio #5 and blue on gpio #6. However, the board + * is actually wired differently as defined here. + */ + blue { + gpios = <&gpio1_0 4 GPIO_ACTIVE_LOW>; + }; + + green { + gpios = <&gpio1_0 5 GPIO_ACTIVE_LOW>; + }; + + red { + gpios = <&gpio1_0 6 GPIO_ACTIVE_LOW>; + }; + }; + + gpio-keys { + compatible = "gpio-keys"; + + boot { + label = "BOOT"; + linux,code = <BTN_0>; + gpios = <&gpio0 0 GPIO_ACTIVE_LOW>; + }; + }; + + sound { + compatible = "simple-audio-card"; + simple-audio-card,format = "i2s"; + status = "disabled"; + + simple-audio-card,cpu { + sound-dai = <&i2s0 0>; + }; + + simple-audio-card,codec { + sound-dai = <&mic>; + }; + }; + + mic: mic { + #sound-dai-cells = <0>; + compatible = "memsensing,msm261s4030h0"; + status = "disabled"; + }; +}; + +&fpioa { + pinctrl-0 = <&jtag_pinctrl>; + pinctrl-names = "default"; + status = "okay"; + + jtag_pinctrl: jtag-pinmux { + pinmux = <K210_FPIOA(0, K210_PCF_JTAG_TCLK)>, + <K210_FPIOA(1, K210_PCF_JTAG_TDI)>, + <K210_FPIOA(2, K210_PCF_JTAG_TMS)>, + <K210_FPIOA(3, K210_PCF_JTAG_TDO)>; + }; + + uarths_pinctrl: uarths-pinmux { + pinmux = <K210_FPIOA(4, K210_PCF_UARTHS_RX)>, + <K210_FPIOA(5, K210_PCF_UARTHS_TX)>; + }; + + gpio_pinctrl: gpio-pinmux { + pinmux = <K210_FPIOA(8, K210_PCF_GPIO0)>, + <K210_FPIOA(11, K210_PCF_GPIO3)>, + <K210_FPIOA(12, K210_PCF_GPIO4)>, + <K210_FPIOA(13, K210_PCF_GPIO5)>, + <K210_FPIOA(14, K210_PCF_GPIO6)>, + <K210_FPIOA(15, K210_PCF_GPIO7)>; + }; + + gpiohs_pinctrl: gpiohs-pinmux { + pinmux = <K210_FPIOA(16, K210_PCF_GPIOHS0)>, + <K210_FPIOA(17, K210_PCF_GPIOHS1)>, + <K210_FPIOA(21, K210_PCF_GPIOHS5)>, + <K210_FPIOA(22, K210_PCF_GPIOHS6)>, + <K210_FPIOA(23, K210_PCF_GPIOHS7)>, + <K210_FPIOA(24, K210_PCF_GPIOHS8)>, + <K210_FPIOA(25, K210_PCF_GPIOHS9)>, + <K210_FPIOA(32, K210_PCF_GPIOHS16)>, + <K210_FPIOA(33, K210_PCF_GPIOHS17)>, + <K210_FPIOA(34, K210_PCF_GPIOHS18)>, + <K210_FPIOA(35, K210_PCF_GPIOHS19)>; + }; + + i2s0_pinctrl: i2s0-pinmux { + pinmux = <K210_FPIOA(18, K210_PCF_I2S0_SCLK)>, + <K210_FPIOA(19, K210_PCF_I2S0_WS)>, + <K210_FPIOA(20, K210_PCF_I2S0_IN_D0)>; + }; + + dvp_pinctrl: dvp-pinmux { + pinmux = <K210_FPIOA(40, K210_PCF_SCCB_SDA)>, + <K210_FPIOA(41, K210_PCF_SCCB_SCLK)>, + <K210_FPIOA(42, K210_PCF_DVP_RST)>, + <K210_FPIOA(43, K210_PCF_DVP_VSYNC)>, + <K210_FPIOA(44, K210_PCF_DVP_PWDN)>, + <K210_FPIOA(45, K210_PCF_DVP_HSYNC)>, + <K210_FPIOA(46, K210_PCF_DVP_XCLK)>, + <K210_FPIOA(47, K210_PCF_DVP_PCLK)>; + }; + + spi0_pinctrl: spi0-pinmux { + pinmux = <K210_FPIOA(36, K210_PCF_GPIOHS20)>, /* cs */ + <K210_FPIOA(37, K210_PCF_GPIOHS21)>, /* rst */ + <K210_FPIOA(38, K210_PCF_GPIOHS22)>, /* dc */ + <K210_FPIOA(39, K210_PCF_SPI0_SCLK)>; /* wr */ + }; + + spi1_pinctrl: spi1-pinmux { + pinmux = <K210_FPIOA(26, K210_PCF_SPI1_D1)>, + <K210_FPIOA(27, K210_PCF_SPI1_SCLK)>, + <K210_FPIOA(28, K210_PCF_SPI1_D0)>, + <K210_FPIOA(29, K210_PCF_GPIOHS13)>; /* cs */ + }; + + i2c1_pinctrl: i2c1-pinmux { + pinmux = <K210_FPIOA(9, K210_PCF_I2C1_SCLK)>, + <K210_FPIOA(10, K210_PCF_I2C1_SDA)>; + }; +}; + +&uarths0 { + pinctrl-0 = <&uarths_pinctrl>; + pinctrl-names = "default"; + status = "okay"; +}; + +&gpio0 { + pinctrl-0 = <&gpiohs_pinctrl>; + pinctrl-names = "default"; + status = "okay"; +}; + +&gpio1 { + pinctrl-0 = <&gpio_pinctrl>; + pinctrl-names = "default"; + status = "okay"; +}; + +&i2s0 { + #sound-dai-cells = <1>; + pinctrl-0 = <&i2s0_pinctrl>; + pinctrl-names = "default"; +}; + +&i2c1 { + pinctrl-0 = <&i2c1_pinctrl>; + pinctrl-names = "default"; + clock-frequency = <400000>; + status = "okay"; +}; + +&dvp0 { + pinctrl-0 = <&dvp_pinctrl>; + pinctrl-names = "default"; +}; + +&spi0 { + pinctrl-0 = <&spi0_pinctrl>; + pinctrl-names = "default"; + num-cs = <1>; + cs-gpios = <&gpio0 20 GPIO_ACTIVE_HIGH>; + + panel@0 { + compatible = "sitronix,st7789v"; + reg = <0>; + reset-gpios = <&gpio0 21 GPIO_ACTIVE_LOW>; + dc-gpios = <&gpio0 22 0>; + spi-max-frequency = <15000000>; + status = "disabled"; + }; +}; + +&spi1 { + pinctrl-0 = <&spi1_pinctrl>; + pinctrl-names = "default"; + num-cs = <1>; + cs-gpios = <&gpio0 13 GPIO_ACTIVE_LOW>; + status = "okay"; + + slot@0 { + compatible = "mmc-spi-slot"; + reg = <0>; + voltage-ranges = <3300 3300>; + spi-max-frequency = <25000000>; + broken-cd; + }; +}; + +&spi3 { + spi-flash@0 { + compatible = "jedec,spi-nor"; + reg = <0>; + spi-max-frequency = <50000000>; + m25p,fast-read; + broken-flash-reset; + }; +}; -- 2.29.2
WARNING: multiple messages have this Message-ID (diff)
From: Damien Le Moal <damien.lemoal@wdc.com> To: Palmer Dabbelt <palmer@dabbelt.com>, linux-riscv@lists.infradead.org, Rob Herring <robh+dt@kernel.org>, devicetree@vger.kernel.org, Stephen Boyd <sboyd@kernel.org>, linux-clk@vger.kernel.org, Linus Walleij <linus.walleij@linaro.org>, linux-gpio@vger.kernel.org, Philipp Zabel <p.zabel@pengutronix.de> Cc: Sean Anderson <seanga2@gmail.com> Subject: [PATCH v10 18/23] riscv: Add SiPeed MAIX DOCK board device tree Date: Sun, 13 Dec 2020 22:50:51 +0900 [thread overview] Message-ID: <20201213135056.24446-19-damien.lemoal@wdc.com> (raw) In-Reply-To: <20201213135056.24446-1-damien.lemoal@wdc.com> Add a device tree for the SiPeed MAIX DOCK m1 and m1w boards. This device tree enables LEDs, gpio, i2c and spi/mmc SD card devices. Signed-off-by: Damien Le Moal <damien.lemoal@wdc.com> --- arch/riscv/boot/dts/canaan/k210_maix_dock.dts | 229 ++++++++++++++++++ 1 file changed, 229 insertions(+) create mode 100644 arch/riscv/boot/dts/canaan/k210_maix_dock.dts diff --git a/arch/riscv/boot/dts/canaan/k210_maix_dock.dts b/arch/riscv/boot/dts/canaan/k210_maix_dock.dts new file mode 100644 index 000000000000..abeaa9bad761 --- /dev/null +++ b/arch/riscv/boot/dts/canaan/k210_maix_dock.dts @@ -0,0 +1,229 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * Copyright (C) 2019-20 Sean Anderson <seanga2@gmail.com> + * Copyright (C) 2020 Western Digital Corporation or its affiliates. + */ + +/dts-v1/; + +#include "k210.dtsi" + +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/input/input.h> + +/ { + model = "SiPeed MAIX Dock"; + compatible = "sipeed,maix-dock-m1wm", "sipeed,maix-dock-m1", + "canaan,kendryte-k210"; + + chosen { + bootargs = "earlycon console=ttySIF0"; + stdout-path = "serial0:115200n8"; + }; + + gpio-leds { + compatible = "gpio-leds"; + + /* + * Note: the board specification document green on gpio #4, + * red on gpio #5 and blue on gpio #6. However, the board + * is actually wired differently as defined here. + */ + blue { + gpios = <&gpio1_0 4 GPIO_ACTIVE_LOW>; + }; + + green { + gpios = <&gpio1_0 5 GPIO_ACTIVE_LOW>; + }; + + red { + gpios = <&gpio1_0 6 GPIO_ACTIVE_LOW>; + }; + }; + + gpio-keys { + compatible = "gpio-keys"; + + boot { + label = "BOOT"; + linux,code = <BTN_0>; + gpios = <&gpio0 0 GPIO_ACTIVE_LOW>; + }; + }; + + sound { + compatible = "simple-audio-card"; + simple-audio-card,format = "i2s"; + status = "disabled"; + + simple-audio-card,cpu { + sound-dai = <&i2s0 0>; + }; + + simple-audio-card,codec { + sound-dai = <&mic>; + }; + }; + + mic: mic { + #sound-dai-cells = <0>; + compatible = "memsensing,msm261s4030h0"; + status = "disabled"; + }; +}; + +&fpioa { + pinctrl-0 = <&jtag_pinctrl>; + pinctrl-names = "default"; + status = "okay"; + + jtag_pinctrl: jtag-pinmux { + pinmux = <K210_FPIOA(0, K210_PCF_JTAG_TCLK)>, + <K210_FPIOA(1, K210_PCF_JTAG_TDI)>, + <K210_FPIOA(2, K210_PCF_JTAG_TMS)>, + <K210_FPIOA(3, K210_PCF_JTAG_TDO)>; + }; + + uarths_pinctrl: uarths-pinmux { + pinmux = <K210_FPIOA(4, K210_PCF_UARTHS_RX)>, + <K210_FPIOA(5, K210_PCF_UARTHS_TX)>; + }; + + gpio_pinctrl: gpio-pinmux { + pinmux = <K210_FPIOA(8, K210_PCF_GPIO0)>, + <K210_FPIOA(11, K210_PCF_GPIO3)>, + <K210_FPIOA(12, K210_PCF_GPIO4)>, + <K210_FPIOA(13, K210_PCF_GPIO5)>, + <K210_FPIOA(14, K210_PCF_GPIO6)>, + <K210_FPIOA(15, K210_PCF_GPIO7)>; + }; + + gpiohs_pinctrl: gpiohs-pinmux { + pinmux = <K210_FPIOA(16, K210_PCF_GPIOHS0)>, + <K210_FPIOA(17, K210_PCF_GPIOHS1)>, + <K210_FPIOA(21, K210_PCF_GPIOHS5)>, + <K210_FPIOA(22, K210_PCF_GPIOHS6)>, + <K210_FPIOA(23, K210_PCF_GPIOHS7)>, + <K210_FPIOA(24, K210_PCF_GPIOHS8)>, + <K210_FPIOA(25, K210_PCF_GPIOHS9)>, + <K210_FPIOA(32, K210_PCF_GPIOHS16)>, + <K210_FPIOA(33, K210_PCF_GPIOHS17)>, + <K210_FPIOA(34, K210_PCF_GPIOHS18)>, + <K210_FPIOA(35, K210_PCF_GPIOHS19)>; + }; + + i2s0_pinctrl: i2s0-pinmux { + pinmux = <K210_FPIOA(18, K210_PCF_I2S0_SCLK)>, + <K210_FPIOA(19, K210_PCF_I2S0_WS)>, + <K210_FPIOA(20, K210_PCF_I2S0_IN_D0)>; + }; + + dvp_pinctrl: dvp-pinmux { + pinmux = <K210_FPIOA(40, K210_PCF_SCCB_SDA)>, + <K210_FPIOA(41, K210_PCF_SCCB_SCLK)>, + <K210_FPIOA(42, K210_PCF_DVP_RST)>, + <K210_FPIOA(43, K210_PCF_DVP_VSYNC)>, + <K210_FPIOA(44, K210_PCF_DVP_PWDN)>, + <K210_FPIOA(45, K210_PCF_DVP_HSYNC)>, + <K210_FPIOA(46, K210_PCF_DVP_XCLK)>, + <K210_FPIOA(47, K210_PCF_DVP_PCLK)>; + }; + + spi0_pinctrl: spi0-pinmux { + pinmux = <K210_FPIOA(36, K210_PCF_GPIOHS20)>, /* cs */ + <K210_FPIOA(37, K210_PCF_GPIOHS21)>, /* rst */ + <K210_FPIOA(38, K210_PCF_GPIOHS22)>, /* dc */ + <K210_FPIOA(39, K210_PCF_SPI0_SCLK)>; /* wr */ + }; + + spi1_pinctrl: spi1-pinmux { + pinmux = <K210_FPIOA(26, K210_PCF_SPI1_D1)>, + <K210_FPIOA(27, K210_PCF_SPI1_SCLK)>, + <K210_FPIOA(28, K210_PCF_SPI1_D0)>, + <K210_FPIOA(29, K210_PCF_GPIOHS13)>; /* cs */ + }; + + i2c1_pinctrl: i2c1-pinmux { + pinmux = <K210_FPIOA(9, K210_PCF_I2C1_SCLK)>, + <K210_FPIOA(10, K210_PCF_I2C1_SDA)>; + }; +}; + +&uarths0 { + pinctrl-0 = <&uarths_pinctrl>; + pinctrl-names = "default"; + status = "okay"; +}; + +&gpio0 { + pinctrl-0 = <&gpiohs_pinctrl>; + pinctrl-names = "default"; + status = "okay"; +}; + +&gpio1 { + pinctrl-0 = <&gpio_pinctrl>; + pinctrl-names = "default"; + status = "okay"; +}; + +&i2s0 { + #sound-dai-cells = <1>; + pinctrl-0 = <&i2s0_pinctrl>; + pinctrl-names = "default"; +}; + +&i2c1 { + pinctrl-0 = <&i2c1_pinctrl>; + pinctrl-names = "default"; + clock-frequency = <400000>; + status = "okay"; +}; + +&dvp0 { + pinctrl-0 = <&dvp_pinctrl>; + pinctrl-names = "default"; +}; + +&spi0 { + pinctrl-0 = <&spi0_pinctrl>; + pinctrl-names = "default"; + num-cs = <1>; + cs-gpios = <&gpio0 20 GPIO_ACTIVE_HIGH>; + + panel@0 { + compatible = "sitronix,st7789v"; + reg = <0>; + reset-gpios = <&gpio0 21 GPIO_ACTIVE_LOW>; + dc-gpios = <&gpio0 22 0>; + spi-max-frequency = <15000000>; + status = "disabled"; + }; +}; + +&spi1 { + pinctrl-0 = <&spi1_pinctrl>; + pinctrl-names = "default"; + num-cs = <1>; + cs-gpios = <&gpio0 13 GPIO_ACTIVE_LOW>; + status = "okay"; + + slot@0 { + compatible = "mmc-spi-slot"; + reg = <0>; + voltage-ranges = <3300 3300>; + spi-max-frequency = <25000000>; + broken-cd; + }; +}; + +&spi3 { + spi-flash@0 { + compatible = "jedec,spi-nor"; + reg = <0>; + spi-max-frequency = <50000000>; + m25p,fast-read; + broken-flash-reset; + }; +}; -- 2.29.2 _______________________________________________ linux-riscv mailing list linux-riscv@lists.infradead.org http://lists.infradead.org/mailman/listinfo/linux-riscv
next prev parent reply other threads:[~2020-12-13 13:55 UTC|newest] Thread overview: 98+ messages / expand[flat|nested] mbox.gz Atom feed top 2020-12-13 13:50 [PATCH v10 00/23] RISC-V Kendryte K210 support improvements Damien Le Moal 2020-12-13 13:50 ` Damien Le Moal 2020-12-13 13:50 ` [PATCH v10 01/23] riscv: Fix kernel time_init() Damien Le Moal 2020-12-13 13:50 ` Damien Le Moal 2020-12-13 13:50 ` [PATCH v10 02/23] riscv: Fix sifive serial driver Damien Le Moal 2020-12-13 13:50 ` Damien Le Moal 2020-12-13 13:50 ` [PATCH v10 03/23] riscv: Enable interrupts during syscalls with M-Mode Damien Le Moal 2020-12-13 13:50 ` Damien Le Moal 2020-12-13 13:50 ` [PATCH v10 04/23] riscv: Fix builtin DTB handling Damien Le Moal 2020-12-13 13:50 ` Damien Le Moal 2020-12-13 13:50 ` [PATCH v10 05/23] riscv: Use vendor name for K210 SoC support Damien Le Moal 2020-12-13 13:50 ` Damien Le Moal 2020-12-28 12:03 ` Anup Patel 2020-12-28 12:03 ` Anup Patel 2020-12-13 13:50 ` [PATCH v10 06/23] riscv: Fix Canaan Kendryte K210 device tree Damien Le Moal 2020-12-13 13:50 ` Damien Le Moal 2020-12-28 12:03 ` Anup Patel 2020-12-28 12:03 ` Anup Patel 2020-12-13 13:50 ` [PATCH v10 07/23] riscv: cleanup Canaan Kendryte K210 sysctl driver Damien Le Moal 2020-12-13 13:50 ` Damien Le Moal 2020-12-13 13:50 ` [PATCH v10 08/23] dt-bindings: Add Canaan vendor prefix Damien Le Moal 2020-12-13 13:50 ` Damien Le Moal 2020-12-13 13:50 ` [PATCH v10 09/23] dt-binding: clock: Document canaan,k210-clk bindings Damien Le Moal 2020-12-13 13:50 ` [PATCH v10 09/23] dt-binding: clock: Document canaan, k210-clk bindings Damien Le Moal 2020-12-17 8:09 ` [PATCH v10 09/23] dt-binding: clock: Document canaan,k210-clk bindings Stephen Boyd 2020-12-17 8:09 ` [PATCH v10 09/23] dt-binding: clock: Document canaan, k210-clk bindings Stephen Boyd 2020-12-17 8:13 ` [PATCH v10 09/23] dt-binding: clock: Document canaan,k210-clk bindings Damien Le Moal 2020-12-17 8:13 ` Damien Le Moal 2020-12-17 10:16 ` Stephen Boyd 2020-12-17 10:16 ` [PATCH v10 09/23] dt-binding: clock: Document canaan, k210-clk bindings Stephen Boyd 2020-12-17 10:43 ` [PATCH v10 09/23] dt-binding: clock: Document canaan,k210-clk bindings Damien Le Moal 2020-12-17 10:43 ` Damien Le Moal 2020-12-17 10:49 ` Stephen Boyd 2020-12-17 10:49 ` [PATCH v10 09/23] dt-binding: clock: Document canaan, k210-clk bindings Stephen Boyd 2020-12-17 10:51 ` [PATCH v10 09/23] dt-binding: clock: Document canaan,k210-clk bindings Damien Le Moal 2020-12-17 10:51 ` Damien Le Moal 2020-12-20 5:35 ` Stephen Boyd 2020-12-20 5:35 ` [PATCH v10 09/23] dt-binding: clock: Document canaan, k210-clk bindings Stephen Boyd 2020-12-20 8:58 ` [PATCH v10 09/23] dt-binding: clock: Document canaan,k210-clk bindings Damien Le Moal 2020-12-20 8:58 ` Damien Le Moal 2020-12-17 10:54 ` Damien Le Moal 2020-12-17 10:54 ` Damien Le Moal 2020-12-19 19:44 ` Stephen Boyd 2020-12-19 19:44 ` [PATCH v10 09/23] dt-binding: clock: Document canaan, k210-clk bindings Stephen Boyd 2020-12-13 13:50 ` [PATCH v10 10/23] dt-bindings: reset: Document canaan,k210-rst bindings Damien Le Moal 2020-12-13 13:50 ` [PATCH v10 10/23] dt-bindings: reset: Document canaan, k210-rst bindings Damien Le Moal 2020-12-13 13:50 ` [PATCH v10 11/23] dt-bindings: pinctrl: Document canaan,k210-fpioa bindings Damien Le Moal 2020-12-13 13:50 ` [PATCH v10 11/23] dt-bindings: pinctrl: Document canaan, k210-fpioa bindings Damien Le Moal 2020-12-13 13:50 ` [PATCH v10 12/23] dt-binding: mfd: Document canaan,k210-sysctl bindings Damien Le Moal 2020-12-13 13:50 ` [PATCH v10 12/23] dt-binding: mfd: Document canaan, k210-sysctl bindings Damien Le Moal 2020-12-15 17:00 ` [PATCH v10 12/23] dt-binding: mfd: Document canaan,k210-sysctl bindings Rob Herring 2020-12-15 17:00 ` Rob Herring 2020-12-13 13:50 ` [PATCH v10 13/23] riscv: Add Canaan Kendryte K210 clock driver Damien Le Moal 2020-12-13 13:50 ` Damien Le Moal 2020-12-13 13:50 ` [PATCH v10 14/23] riscv: Add Canaan Kendryte K210 reset controller Damien Le Moal 2020-12-13 13:50 ` Damien Le Moal 2020-12-13 13:50 ` [PATCH v10 15/23] riscv: Add Canaan Kendryte K210 FPIOA driver Damien Le Moal 2020-12-13 13:50 ` Damien Le Moal 2020-12-13 13:50 ` [PATCH v10 16/23] riscv: Update Canaan Kendryte K210 device tree Damien Le Moal 2020-12-13 13:50 ` Damien Le Moal 2020-12-28 12:07 ` Anup Patel 2020-12-28 12:07 ` Anup Patel 2020-12-13 13:50 ` [PATCH v10 17/23] riscv: Add SiPeed MAIX BiT board " Damien Le Moal 2020-12-13 13:50 ` Damien Le Moal 2020-12-28 12:08 ` Anup Patel 2020-12-28 12:08 ` Anup Patel 2020-12-13 13:50 ` Damien Le Moal [this message] 2020-12-13 13:50 ` [PATCH v10 18/23] riscv: Add SiPeed MAIX DOCK " Damien Le Moal 2020-12-28 12:08 ` Anup Patel 2020-12-28 12:08 ` Anup Patel 2020-12-13 13:50 ` [PATCH v10 19/23] riscv: Add SiPeed MAIX GO " Damien Le Moal 2020-12-13 13:50 ` Damien Le Moal 2020-12-28 12:09 ` Anup Patel 2020-12-28 12:09 ` Anup Patel 2020-12-13 13:50 ` [PATCH v10 20/23] riscv: Add SiPeed MAIXDUINO " Damien Le Moal 2020-12-13 13:50 ` Damien Le Moal 2020-12-28 12:10 ` Anup Patel 2020-12-28 12:10 ` Anup Patel 2020-12-13 13:50 ` [PATCH v10 21/23] riscv: Add Kendryte KD233 " Damien Le Moal 2020-12-13 13:50 ` Damien Le Moal 2020-12-28 12:10 ` Anup Patel 2020-12-28 12:10 ` Anup Patel 2020-12-13 13:50 ` [PATCH v10 22/23] riscv: Update Canaan Kendryte K210 defconfig Damien Le Moal 2020-12-13 13:50 ` Damien Le Moal 2020-12-28 12:11 ` Anup Patel 2020-12-28 12:11 ` Anup Patel 2020-12-13 13:50 ` [PATCH v10 23/23] riscv: Add Canaan Kendryte K210 SD card defconfig Damien Le Moal 2020-12-13 13:50 ` Damien Le Moal 2020-12-28 12:12 ` Anup Patel 2020-12-28 12:12 ` Anup Patel 2020-12-15 23:02 ` [PATCH v10 00/23] RISC-V Kendryte K210 support improvements Damien Le Moal 2020-12-15 23:02 ` Damien Le Moal 2021-01-09 17:32 ` Palmer Dabbelt 2021-01-09 17:32 ` Palmer Dabbelt 2021-01-11 1:56 ` Damien Le Moal 2021-01-11 1:56 ` Damien Le Moal 2021-01-11 2:34 ` Sean Anderson 2021-01-11 2:34 ` Sean Anderson
Reply instructions: You may reply publicly to this message via plain-text email using any one of the following methods: * Save the following mbox file, import it into your mail client, and reply-to-all from there: mbox Avoid top-posting and favor interleaved quoting: https://en.wikipedia.org/wiki/Posting_style#Interleaved_style * Reply using the --to, --cc, and --in-reply-to switches of git-send-email(1): git send-email \ --in-reply-to=20201213135056.24446-19-damien.lemoal@wdc.com \ --to=damien.lemoal@wdc.com \ --cc=devicetree@vger.kernel.org \ --cc=linus.walleij@linaro.org \ --cc=linux-clk@vger.kernel.org \ --cc=linux-gpio@vger.kernel.org \ --cc=linux-riscv@lists.infradead.org \ --cc=p.zabel@pengutronix.de \ --cc=palmer@dabbelt.com \ --cc=robh+dt@kernel.org \ --cc=sboyd@kernel.org \ --cc=seanga2@gmail.com \ /path/to/YOUR_REPLY https://kernel.org/pub/software/scm/git/docs/git-send-email.html * If your mail client supports setting the In-Reply-To header via mailto: links, try the mailto: linkBe sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.