All of lore.kernel.org
 help / color / mirror / Atom feed
From: Saeed Mahameed <saeed@kernel.org>
To: "David S. Miller" <davem@davemloft.net>,
	Jakub Kicinski <kuba@kernel.org>,
	Jason Gunthorpe <jgg@nvidia.com>
Cc: Leon Romanovsky <leonro@nvidia.com>,
	netdev@vger.kernel.org, linux-rdma@vger.kernel.org,
	David Ahern <dsahern@kernel.org>,
	Jacob Keller <jacob.e.keller@intel.com>,
	Sridhar Samudrala <sridhar.samudrala@intel.com>,
	david.m.ertman@intel.com, dan.j.williams@intel.com,
	kiran.patil@intel.com, gregkh@linuxfoundation.org,
	Parav Pandit <parav@nvidia.com>, Jiri Pirko <jiri@nvidia.com>,
	Vu Pham <vuhuong@nvidia.com>, Saeed Mahameed <saeedm@nvidia.com>
Subject: [net-next v4 03/15] devlink: Introduce PCI SF port flavour and port attribute
Date: Mon, 14 Dec 2020 13:43:40 -0800	[thread overview]
Message-ID: <20201214214352.198172-4-saeed@kernel.org> (raw)
In-Reply-To: <20201214214352.198172-1-saeed@kernel.org>

From: Parav Pandit <parav@nvidia.com>

A PCI sub-function (SF) represents a portion of the device similar
to PCI VF.

In an eswitch, PCI SF may have port which is normally represented
using a representor netdevice.
To have better visibility of eswitch port, its association with SF,
and its representor netdevice, introduce a PCI SF port flavour.

When devlink port flavour is PCI SF, fill up PCI SF attributes of the
port.

Extend port name creation using PCI PF and SF number scheme on best
effort basis, so that vendor drivers can skip defining their own
scheme.
This is done as cApfNSfM, where A, N and M are controller, PCI PF and
PCI SF number respectively.
This is similar to existing naming for PCI PF and PCI VF ports.

An example view of a PCI SF port:

$ devlink port show pci/0000:06:00.0/32768
pci/0000:06:00.0/32768: type eth netdev ens2f0npf0sf88 flavour pcisf controller 0 pfnum 0 sfnum 88 external false splittable false
  function:
    hw_addr 00:00:00:00:88:88 state active opstate attached

$ devlink port show pci/0000:06:00.0/32768 -jp
{
    "port": {
        "pci/0000:06:00.0/32768": {
            "type": "eth",
            "netdev": "ens2f0npf0sf88",
            "flavour": "pcisf",
            "controller": 0,
            "pfnum": 0,
            "sfnum": 88,
            "external": false,
            "splittable": false,
            "function": {
                "hw_addr": "00:00:00:00:88:88",
                "state": "active",
                "opstate": "attached"
            }
        }
    }
}

Signed-off-by: Parav Pandit <parav@nvidia.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Reviewed-by: Vu Pham <vuhuong@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
---
 include/net/devlink.h        | 17 +++++++++++++
 include/uapi/linux/devlink.h |  5 ++++
 net/core/devlink.c           | 46 ++++++++++++++++++++++++++++++++++++
 3 files changed, 68 insertions(+)

diff --git a/include/net/devlink.h b/include/net/devlink.h
index f466819cc477..5bd43f0a79a8 100644
--- a/include/net/devlink.h
+++ b/include/net/devlink.h
@@ -93,6 +93,20 @@ struct devlink_port_pci_vf_attrs {
 	u8 external:1;
 };
 
+/**
+ * struct devlink_port_pci_sf_attrs - devlink port's PCI SF attributes
+ * @controller: Associated controller number
+ * @pf: Associated PCI PF number for this port.
+ * @sf: Associated PCI SF for of the PCI PF for this port.
+ * @external: when set, indicates if a port is for an external controller
+ */
+struct devlink_port_pci_sf_attrs {
+	u32 controller;
+	u16 pf;
+	u32 sf;
+	u8 external:1;
+};
+
 /**
  * struct devlink_port_attrs - devlink port object
  * @flavour: flavour of the port
@@ -114,6 +128,7 @@ struct devlink_port_attrs {
 		struct devlink_port_phys_attrs phys;
 		struct devlink_port_pci_pf_attrs pci_pf;
 		struct devlink_port_pci_vf_attrs pci_vf;
+		struct devlink_port_pci_sf_attrs pci_sf;
 	};
 };
 
@@ -1404,6 +1419,8 @@ void devlink_port_attrs_pci_pf_set(struct devlink_port *devlink_port, u32 contro
 				   u16 pf, bool external);
 void devlink_port_attrs_pci_vf_set(struct devlink_port *devlink_port, u32 controller,
 				   u16 pf, u16 vf, bool external);
+void devlink_port_attrs_pci_sf_set(struct devlink_port *devlink_port, u32 controller,
+				   u16 pf, u32 sf, bool external);
 int devlink_sb_register(struct devlink *devlink, unsigned int sb_index,
 			u32 size, u16 ingress_pools_count,
 			u16 egress_pools_count, u16 ingress_tc_count,
diff --git a/include/uapi/linux/devlink.h b/include/uapi/linux/devlink.h
index 5203f54a2be1..6fe00f10eb3f 100644
--- a/include/uapi/linux/devlink.h
+++ b/include/uapi/linux/devlink.h
@@ -200,6 +200,10 @@ enum devlink_port_flavour {
 	DEVLINK_PORT_FLAVOUR_UNUSED, /* Port which exists in the switch, but
 				      * is not used in any way.
 				      */
+	DEVLINK_PORT_FLAVOUR_PCI_SF, /* Represents eswitch port
+				      * for the PCI SF. It is an internal
+				      * port that faces the PCI SF.
+				      */
 };
 
 enum devlink_param_cmode {
@@ -529,6 +533,7 @@ enum devlink_attr {
 	DEVLINK_ATTR_RELOAD_ACTION_INFO,        /* nested */
 	DEVLINK_ATTR_RELOAD_ACTION_STATS,       /* nested */
 
+	DEVLINK_ATTR_PORT_PCI_SF_NUMBER,	/* u32 */
 	/* add new attributes above here, update the policy in devlink.c */
 
 	__DEVLINK_ATTR_MAX,
diff --git a/net/core/devlink.c b/net/core/devlink.c
index 13e0de80c4f9..08eac247f200 100644
--- a/net/core/devlink.c
+++ b/net/core/devlink.c
@@ -690,6 +690,15 @@ static int devlink_nl_port_attrs_put(struct sk_buff *msg,
 		if (nla_put_u8(msg, DEVLINK_ATTR_PORT_EXTERNAL, attrs->pci_vf.external))
 			return -EMSGSIZE;
 		break;
+	case DEVLINK_PORT_FLAVOUR_PCI_SF:
+		if (nla_put_u32(msg, DEVLINK_ATTR_PORT_CONTROLLER_NUMBER,
+				attrs->pci_sf.controller) ||
+		    nla_put_u16(msg, DEVLINK_ATTR_PORT_PCI_PF_NUMBER, attrs->pci_sf.pf) ||
+		    nla_put_u32(msg, DEVLINK_ATTR_PORT_PCI_SF_NUMBER, attrs->pci_sf.sf))
+			return -EMSGSIZE;
+		if (nla_put_u8(msg, DEVLINK_ATTR_PORT_EXTERNAL, attrs->pci_sf.external))
+			return -EMSGSIZE;
+		break;
 	case DEVLINK_PORT_FLAVOUR_PHYSICAL:
 	case DEVLINK_PORT_FLAVOUR_CPU:
 	case DEVLINK_PORT_FLAVOUR_DSA:
@@ -8373,6 +8382,33 @@ void devlink_port_attrs_pci_vf_set(struct devlink_port *devlink_port, u32 contro
 }
 EXPORT_SYMBOL_GPL(devlink_port_attrs_pci_vf_set);
 
+/**
+ *	devlink_port_attrs_pci_sf_set - Set PCI SF port attributes
+ *
+ *	@devlink_port: devlink port
+ *	@controller: associated controller number for the devlink port instance
+ *	@pf: associated PF for the devlink port instance
+ *	@sf: associated SF of a PF for the devlink port instance
+ *	@external: indicates if the port is for an external controller
+ */
+void devlink_port_attrs_pci_sf_set(struct devlink_port *devlink_port, u32 controller,
+				   u16 pf, u32 sf, bool external)
+{
+	struct devlink_port_attrs *attrs = &devlink_port->attrs;
+	int ret;
+
+	if (WARN_ON(devlink_port->registered))
+		return;
+	ret = __devlink_port_attrs_set(devlink_port, DEVLINK_PORT_FLAVOUR_PCI_SF);
+	if (ret)
+		return;
+	attrs->pci_sf.controller = controller;
+	attrs->pci_sf.pf = pf;
+	attrs->pci_sf.sf = sf;
+	attrs->pci_sf.external = external;
+}
+EXPORT_SYMBOL_GPL(devlink_port_attrs_pci_sf_set);
+
 static int __devlink_port_phys_port_name_get(struct devlink_port *devlink_port,
 					     char *name, size_t len)
 {
@@ -8421,6 +8457,16 @@ static int __devlink_port_phys_port_name_get(struct devlink_port *devlink_port,
 		n = snprintf(name, len, "pf%uvf%u",
 			     attrs->pci_vf.pf, attrs->pci_vf.vf);
 		break;
+	case DEVLINK_PORT_FLAVOUR_PCI_SF:
+		if (attrs->pci_sf.external) {
+			n = snprintf(name, len, "c%u", attrs->pci_sf.controller);
+			if (n >= len)
+				return -EINVAL;
+			len -= n;
+			name += n;
+		}
+		n = snprintf(name, len, "pf%usf%u", attrs->pci_sf.pf, attrs->pci_sf.sf);
+		break;
 	}
 
 	if (n >= len)
-- 
2.26.2


  parent reply	other threads:[~2020-12-14 21:52 UTC|newest]

Thread overview: 65+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2020-12-14 21:43 [net-next v4 00/15] Add mlx5 subfunction support Saeed Mahameed
2020-12-14 21:43 ` [net-next v4 01/15] net/mlx5: Fix compilation warning for 32-bit platform Saeed Mahameed
2020-12-14 22:31   ` Alexander Duyck
2020-12-14 22:45     ` Saeed Mahameed
2020-12-15  4:59     ` Leon Romanovsky
2020-12-14 21:43 ` [net-next v4 02/15] devlink: Prepare code to fill multiple port function attributes Saeed Mahameed
2020-12-14 21:43 ` Saeed Mahameed [this message]
2020-12-14 21:43 ` [net-next v4 04/15] devlink: Support add and delete devlink port Saeed Mahameed
2020-12-14 21:43 ` [net-next v4 05/15] devlink: Support get and set state of port function Saeed Mahameed
2020-12-14 21:43 ` [net-next v4 06/15] net/mlx5: Introduce vhca state event notifier Saeed Mahameed
2020-12-14 21:43 ` [net-next v4 07/15] net/mlx5: SF, Add auxiliary device support Saeed Mahameed
2020-12-14 21:43 ` [net-next v4 08/15] net/mlx5: SF, Add auxiliary device driver Saeed Mahameed
2020-12-14 21:43 ` [net-next v4 09/15] net/mlx5: E-switch, Prepare eswitch to handle SF vport Saeed Mahameed
2020-12-14 21:43 ` [net-next v4 10/15] net/mlx5: E-switch, Add eswitch helpers for " Saeed Mahameed
2020-12-14 21:43 ` [net-next v4 11/15] net/mlx5: SF, Add port add delete functionality Saeed Mahameed
2020-12-14 21:43 ` [net-next v4 12/15] net/mlx5: SF, Port function state change support Saeed Mahameed
2020-12-14 21:43 ` [net-next v4 13/15] devlink: Add devlink port documentation Saeed Mahameed
2020-12-14 21:43 ` [net-next v4 14/15] devlink: Extend devlink port documentation for subfunctions Saeed Mahameed
2020-12-14 21:43 ` [net-next v4 15/15] net/mlx5: Add devlink subfunction port documentation Saeed Mahameed
2020-12-15  1:53 ` [net-next v4 00/15] Add mlx5 subfunction support Alexander Duyck
2020-12-15  2:44   ` David Ahern
2020-12-15 16:16     ` Alexander Duyck
2020-12-15 16:59       ` Parav Pandit
2020-12-15  5:48   ` Parav Pandit
2020-12-15 18:47     ` Alexander Duyck
2020-12-15 20:05       ` Saeed Mahameed
2020-12-15 21:03       ` Jason Gunthorpe
2020-12-16  1:12       ` Edwin Peer
2020-12-16  2:39         ` Jason Gunthorpe
2020-12-16  3:12         ` Alexander Duyck
2020-12-15 20:59     ` David Ahern
2020-12-15  6:15   ` Saeed Mahameed
2020-12-15 19:12     ` Alexander Duyck
2020-12-15 20:35       ` Saeed Mahameed
2020-12-15 21:28         ` Jakub Kicinski
2020-12-16  6:50           ` Leon Romanovsky
2020-12-16 17:59             ` Saeed Mahameed
2020-12-15 21:41         ` Alexander Duyck
2020-12-16  0:19           ` Jason Gunthorpe
2020-12-16  2:19             ` Alexander Duyck
2020-12-16  3:03               ` Jason Gunthorpe
2020-12-16  4:13                 ` Alexander Duyck
2020-12-16  4:45                   ` Parav Pandit
2020-12-16 13:33                   ` Jason Gunthorpe
2020-12-16 16:31                     ` Alexander Duyck
2020-12-16 17:51                       ` Jason Gunthorpe
2020-12-16 19:27                         ` Alexander Duyck
2020-12-16 20:35                           ` Jason Gunthorpe
2020-12-16 22:53                             ` Alexander Duyck
2020-12-17  0:38                               ` Jason Gunthorpe
2020-12-17 18:48                                 ` Alexander Duyck
2020-12-17 19:40                                   ` Jason Gunthorpe
2020-12-17 21:05                                     ` Alexander Duyck
2020-12-18  0:08                                       ` Jason Gunthorpe
2020-12-18  1:30                               ` David Ahern
2020-12-18  3:11                                 ` Alexander Duyck
2020-12-18  3:55                                   ` David Ahern
2020-12-18 15:54                                     ` Alexander Duyck
2020-12-18  5:20                                   ` Parav Pandit
2020-12-18  5:36                                     ` Parav Pandit
2020-12-18 16:01                                     ` Alexander Duyck
2020-12-18 18:01                                       ` Parav Pandit
2020-12-18 19:22                                         ` Alexander Duyck
2020-12-18 20:18                                           ` Jason Gunthorpe
2020-12-19  0:03                                             ` Alexander Duyck

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20201214214352.198172-4-saeed@kernel.org \
    --to=saeed@kernel.org \
    --cc=dan.j.williams@intel.com \
    --cc=davem@davemloft.net \
    --cc=david.m.ertman@intel.com \
    --cc=dsahern@kernel.org \
    --cc=gregkh@linuxfoundation.org \
    --cc=jacob.e.keller@intel.com \
    --cc=jgg@nvidia.com \
    --cc=jiri@nvidia.com \
    --cc=kiran.patil@intel.com \
    --cc=kuba@kernel.org \
    --cc=leonro@nvidia.com \
    --cc=linux-rdma@vger.kernel.org \
    --cc=netdev@vger.kernel.org \
    --cc=parav@nvidia.com \
    --cc=saeedm@nvidia.com \
    --cc=sridhar.samudrala@intel.com \
    --cc=vuhuong@nvidia.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.