* [PULL 00/20] target-arm queue
@ 2020-12-15 14:12 Peter Maydell
2020-12-15 14:12 ` [PULL 01/20] gdbstub: Correct misparsing of vCont C/S requests Peter Maydell
` (20 more replies)
0 siblings, 21 replies; 31+ messages in thread
From: Peter Maydell @ 2020-12-15 14:12 UTC (permalink / raw)
To: qemu-devel
A grab-bag of minor stuff for the end of the year. My to-review
queue is not empty, but it it at least in single figures...
-- PMM
The following changes since commit 5bfbd8170ce7acb98a1834ff49ed7340b0837144:
Merge remote-tracking branch 'remotes/vivier2/tags/trivial-branch-for-6.0-pull-request' into staging (2020-12-14 20:32:38 +0000)
are available in the Git repository at:
https://git.linaro.org/people/pmaydell/qemu-arm.git tags/pull-target-arm-20201215
for you to fetch changes up to 23af268566069183285bebbdf95b1b37cb7c0942:
hw/block/m25p80: Fix Numonyx fast read dummy cycle count (2020-12-15 13:39:30 +0000)
----------------------------------------------------------------
target-arm queue:
* gdbstub: Correct misparsing of vCont C/S requests
* openrisc: Move pic_cpu code into CPU object proper
* nios2: Move IIC code into CPU object proper
* Improve reporting of ROM overlap errors
* xlnx-versal: Add USB support
* hw/misc/zynq_slcr: Avoid #DIV/0! error
* Numonyx: Fix dummy cycles and check for SPI mode on cmds
----------------------------------------------------------------
Joe Komlodi (4):
hw/block/m25p80: Make Numonyx config field names more accurate
hw/block/m25p80: Fix when VCFG XIP bit is set for Numonyx
hw/block/m25p80: Check SPI mode before running some Numonyx commands
hw/block/m25p80: Fix Numonyx fast read dummy cycle count
Peter Maydell (11):
gdbstub: Correct misparsing of vCont C/S requests
hw/openrisc/openrisc_sim: Use IRQ splitter when connecting IRQ to multiple CPUs
hw/openrisc/openrisc_sim: Abstract out "get IRQ x of CPU y"
target/openrisc: Move pic_cpu code into CPU object proper
target/nios2: Move IIC code into CPU object proper
target/nios2: Move nios2_check_interrupts() into target/nios2
target/nios2: Use deposit32() to update ipending register
hw/core/loader.c: Track last-seen ROM in rom_check_and_register_reset()
hw/core/loader.c: Improve reporting of ROM overlap errors
elf_ops.h: Don't truncate name of the ROM blobs we create
elf_ops.h: Be more verbose with ROM blob names
Philippe Mathieu-Daudé (1):
hw/misc/zynq_slcr: Avoid #DIV/0! error
Sai Pavan Boddu (2):
usb: Add versal-usb2-ctrl-regs module
usb: xlnx-usb-subsystem: Add xilinx usb subsystem
Vikram Garhwal (2):
usb: Add DWC3 model
arm: xlnx-versal: Connect usb to virt-versal
include/hw/arm/xlnx-versal.h | 9 +
include/hw/elf_ops.h | 5 +-
include/hw/usb/hcd-dwc3.h | 55 +++
include/hw/usb/xlnx-usb-subsystem.h | 45 ++
include/hw/usb/xlnx-versal-usb2-ctrl-regs.h | 45 ++
target/nios2/cpu.h | 3 -
target/openrisc/cpu.h | 1 -
gdbstub.c | 2 +-
hw/arm/xlnx-versal-virt.c | 55 +++
hw/arm/xlnx-versal.c | 26 ++
hw/block/m25p80.c | 158 +++++--
hw/core/loader.c | 67 ++-
hw/intc/nios2_iic.c | 95 ----
hw/misc/zynq_slcr.c | 5 +
hw/nios2/10m50_devboard.c | 13 +-
hw/nios2/cpu_pic.c | 67 ---
hw/openrisc/openrisc_sim.c | 46 +-
hw/openrisc/pic_cpu.c | 61 ---
hw/usb/hcd-dwc3.c | 689 ++++++++++++++++++++++++++++
hw/usb/xlnx-usb-subsystem.c | 94 ++++
hw/usb/xlnx-versal-usb2-ctrl-regs.c | 229 +++++++++
softmmu/vl.c | 1 -
target/nios2/cpu.c | 29 ++
target/nios2/op_helper.c | 9 +
target/openrisc/cpu.c | 32 ++
MAINTAINERS | 1 -
hw/intc/meson.build | 1 -
hw/nios2/meson.build | 2 +-
hw/openrisc/Kconfig | 1 +
hw/openrisc/meson.build | 2 +-
hw/usb/Kconfig | 10 +
hw/usb/meson.build | 3 +
32 files changed, 1557 insertions(+), 304 deletions(-)
create mode 100644 include/hw/usb/hcd-dwc3.h
create mode 100644 include/hw/usb/xlnx-usb-subsystem.h
create mode 100644 include/hw/usb/xlnx-versal-usb2-ctrl-regs.h
delete mode 100644 hw/intc/nios2_iic.c
delete mode 100644 hw/nios2/cpu_pic.c
delete mode 100644 hw/openrisc/pic_cpu.c
create mode 100644 hw/usb/hcd-dwc3.c
create mode 100644 hw/usb/xlnx-usb-subsystem.c
create mode 100644 hw/usb/xlnx-versal-usb2-ctrl-regs.c
^ permalink raw reply [flat|nested] 31+ messages in thread
* [PULL 01/20] gdbstub: Correct misparsing of vCont C/S requests
2020-12-15 14:12 [PULL 00/20] target-arm queue Peter Maydell
@ 2020-12-15 14:12 ` Peter Maydell
2020-12-15 14:12 ` [PULL 02/20] hw/openrisc/openrisc_sim: Use IRQ splitter when connecting IRQ to multiple CPUs Peter Maydell
` (19 subsequent siblings)
20 siblings, 0 replies; 31+ messages in thread
From: Peter Maydell @ 2020-12-15 14:12 UTC (permalink / raw)
To: qemu-devel
In the vCont packet, two of the command actions (C and S) take an
argument specifying the signal to be sent to the process/thread, which is
sent as an ASCII string of two hex digits which immediately follow the
'C' or 'S' character.
Our code for parsing this packet accidentally skipped the first of the
two bytes of the signal value, because it started parsing the hex string
at 'p + 1' when the preceding code had already moved past the 'C' or
'S' with "cur_action = *p++".
This meant that we would only do the right thing for signals below
10, and would misinterpret the rest. For instance, when the debugger
wants to send the process a SIGPROF (27 on x86-64) we mangle this into
a SIGSEGV (11).
Remove the accidental double increment.
Fixes: https://bugs.launchpad.net/qemu/+bug/1773743
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Message-id: 20201121210342.10089-1-peter.maydell@linaro.org
---
gdbstub.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/gdbstub.c b/gdbstub.c
index f19f98ab1ab..d99bc0bf2ea 100644
--- a/gdbstub.c
+++ b/gdbstub.c
@@ -1243,7 +1243,7 @@ static int gdb_handle_vcont(const char *p)
cur_action = *p++;
if (cur_action == 'C' || cur_action == 'S') {
cur_action = qemu_tolower(cur_action);
- res = qemu_strtoul(p + 1, &p, 16, &tmp);
+ res = qemu_strtoul(p, &p, 16, &tmp);
if (res) {
goto out;
}
--
2.20.1
^ permalink raw reply related [flat|nested] 31+ messages in thread
* [PULL 02/20] hw/openrisc/openrisc_sim: Use IRQ splitter when connecting IRQ to multiple CPUs
2020-12-15 14:12 [PULL 00/20] target-arm queue Peter Maydell
2020-12-15 14:12 ` [PULL 01/20] gdbstub: Correct misparsing of vCont C/S requests Peter Maydell
@ 2020-12-15 14:12 ` Peter Maydell
2020-12-15 14:12 ` [PULL 03/20] hw/openrisc/openrisc_sim: Abstract out "get IRQ x of CPU y" Peter Maydell
` (18 subsequent siblings)
20 siblings, 0 replies; 31+ messages in thread
From: Peter Maydell @ 2020-12-15 14:12 UTC (permalink / raw)
To: qemu-devel
openrisc_sim_net_init() attempts to connect the IRQ line from the
ethernet device to both CPUs in an SMP configuration by simply caling
sysbus_connect_irq() for it twice. This doesn't work, because the
second connection simply overrides the first.
Fix this by creating a TYPE_SPLIT_IRQ to split the IRQ in the SMP
case.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Stafford Horne <shorne@gmail.com>
Message-id: 20201127225127.14770-2-peter.maydell@linaro.org
---
hw/openrisc/openrisc_sim.c | 13 +++++++++++--
hw/openrisc/Kconfig | 1 +
2 files changed, 12 insertions(+), 2 deletions(-)
diff --git a/hw/openrisc/openrisc_sim.c b/hw/openrisc/openrisc_sim.c
index d752282e675..a8adf6b70d7 100644
--- a/hw/openrisc/openrisc_sim.c
+++ b/hw/openrisc/openrisc_sim.c
@@ -34,6 +34,7 @@
#include "hw/sysbus.h"
#include "sysemu/qtest.h"
#include "sysemu/reset.h"
+#include "hw/core/split-irq.h"
#define KERNEL_LOAD_ADDR 0x100
@@ -64,8 +65,16 @@ static void openrisc_sim_net_init(hwaddr base, hwaddr descriptors,
s = SYS_BUS_DEVICE(dev);
sysbus_realize_and_unref(s, &error_fatal);
- for (i = 0; i < num_cpus; i++) {
- sysbus_connect_irq(s, 0, cpu_irqs[i][irq_pin]);
+ if (num_cpus > 1) {
+ DeviceState *splitter = qdev_new(TYPE_SPLIT_IRQ);
+ qdev_prop_set_uint32(splitter, "num-lines", num_cpus);
+ qdev_realize_and_unref(splitter, NULL, &error_fatal);
+ for (i = 0; i < num_cpus; i++) {
+ qdev_connect_gpio_out(splitter, i, cpu_irqs[i][irq_pin]);
+ }
+ sysbus_connect_irq(s, 0, qdev_get_gpio_in(splitter, 0));
+ } else {
+ sysbus_connect_irq(s, 0, cpu_irqs[0][irq_pin]);
}
sysbus_mmio_map(s, 0, base);
sysbus_mmio_map(s, 1, descriptors);
diff --git a/hw/openrisc/Kconfig b/hw/openrisc/Kconfig
index 6c1e86884e2..8f284f3ba04 100644
--- a/hw/openrisc/Kconfig
+++ b/hw/openrisc/Kconfig
@@ -3,3 +3,4 @@ config OR1K_SIM
select SERIAL
select OPENCORES_ETH
select OMPIC
+ select SPLIT_IRQ
--
2.20.1
^ permalink raw reply related [flat|nested] 31+ messages in thread
* [PULL 03/20] hw/openrisc/openrisc_sim: Abstract out "get IRQ x of CPU y"
2020-12-15 14:12 [PULL 00/20] target-arm queue Peter Maydell
2020-12-15 14:12 ` [PULL 01/20] gdbstub: Correct misparsing of vCont C/S requests Peter Maydell
2020-12-15 14:12 ` [PULL 02/20] hw/openrisc/openrisc_sim: Use IRQ splitter when connecting IRQ to multiple CPUs Peter Maydell
@ 2020-12-15 14:12 ` Peter Maydell
2020-12-15 14:12 ` [PULL 04/20] target/openrisc: Move pic_cpu code into CPU object proper Peter Maydell
` (17 subsequent siblings)
20 siblings, 0 replies; 31+ messages in thread
From: Peter Maydell @ 2020-12-15 14:12 UTC (permalink / raw)
To: qemu-devel
We're about to refactor the OpenRISC pic_cpu code in a way that means
that just grabbing the whole qemu_irq[] array of inbound IRQs for a
CPU won't be possible any more. Abstract out a function for "return
the qemu_irq for IRQ x input of CPU y" so we can more easily replace
the implementation.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Stafford Horne <shorne@gmail.com>
Message-id: 20201127225127.14770-3-peter.maydell@linaro.org
---
hw/openrisc/openrisc_sim.c | 38 +++++++++++++++++++++-----------------
1 file changed, 21 insertions(+), 17 deletions(-)
diff --git a/hw/openrisc/openrisc_sim.c b/hw/openrisc/openrisc_sim.c
index a8adf6b70d7..75ba0f47444 100644
--- a/hw/openrisc/openrisc_sim.c
+++ b/hw/openrisc/openrisc_sim.c
@@ -52,8 +52,13 @@ static void main_cpu_reset(void *opaque)
cpu_set_pc(cs, boot_info.bootstrap_pc);
}
+static qemu_irq get_cpu_irq(OpenRISCCPU *cpus[], int cpunum, int irq_pin)
+{
+ return cpus[cpunum]->env.irq[irq_pin];
+}
+
static void openrisc_sim_net_init(hwaddr base, hwaddr descriptors,
- int num_cpus, qemu_irq **cpu_irqs,
+ int num_cpus, OpenRISCCPU *cpus[],
int irq_pin, NICInfo *nd)
{
DeviceState *dev;
@@ -70,18 +75,18 @@ static void openrisc_sim_net_init(hwaddr base, hwaddr descriptors,
qdev_prop_set_uint32(splitter, "num-lines", num_cpus);
qdev_realize_and_unref(splitter, NULL, &error_fatal);
for (i = 0; i < num_cpus; i++) {
- qdev_connect_gpio_out(splitter, i, cpu_irqs[i][irq_pin]);
+ qdev_connect_gpio_out(splitter, i, get_cpu_irq(cpus, i, irq_pin));
}
sysbus_connect_irq(s, 0, qdev_get_gpio_in(splitter, 0));
} else {
- sysbus_connect_irq(s, 0, cpu_irqs[0][irq_pin]);
+ sysbus_connect_irq(s, 0, get_cpu_irq(cpus, 0, irq_pin));
}
sysbus_mmio_map(s, 0, base);
sysbus_mmio_map(s, 1, descriptors);
}
static void openrisc_sim_ompic_init(hwaddr base, int num_cpus,
- qemu_irq **cpu_irqs, int irq_pin)
+ OpenRISCCPU *cpus[], int irq_pin)
{
DeviceState *dev;
SysBusDevice *s;
@@ -93,7 +98,7 @@ static void openrisc_sim_ompic_init(hwaddr base, int num_cpus,
s = SYS_BUS_DEVICE(dev);
sysbus_realize_and_unref(s, &error_fatal);
for (i = 0; i < num_cpus; i++) {
- sysbus_connect_irq(s, i, cpu_irqs[i][irq_pin]);
+ sysbus_connect_irq(s, i, get_cpu_irq(cpus, i, irq_pin));
}
sysbus_mmio_map(s, 0, base);
}
@@ -136,26 +141,24 @@ static void openrisc_sim_init(MachineState *machine)
{
ram_addr_t ram_size = machine->ram_size;
const char *kernel_filename = machine->kernel_filename;
- OpenRISCCPU *cpu = NULL;
+ OpenRISCCPU *cpus[2] = {};
MemoryRegion *ram;
- qemu_irq *cpu_irqs[2];
qemu_irq serial_irq;
int n;
unsigned int smp_cpus = machine->smp.cpus;
assert(smp_cpus >= 1 && smp_cpus <= 2);
for (n = 0; n < smp_cpus; n++) {
- cpu = OPENRISC_CPU(cpu_create(machine->cpu_type));
- if (cpu == NULL) {
+ cpus[n] = OPENRISC_CPU(cpu_create(machine->cpu_type));
+ if (cpus[n] == NULL) {
fprintf(stderr, "Unable to find CPU definition!\n");
exit(1);
}
- cpu_openrisc_pic_init(cpu);
- cpu_irqs[n] = (qemu_irq *) cpu->env.irq;
+ cpu_openrisc_pic_init(cpus[n]);
- cpu_openrisc_clock_init(cpu);
+ cpu_openrisc_clock_init(cpus[n]);
- qemu_register_reset(main_cpu_reset, cpu);
+ qemu_register_reset(main_cpu_reset, cpus[n]);
}
ram = g_malloc(sizeof(*ram));
@@ -164,15 +167,16 @@ static void openrisc_sim_init(MachineState *machine)
if (nd_table[0].used) {
openrisc_sim_net_init(0x92000000, 0x92000400, smp_cpus,
- cpu_irqs, 4, nd_table);
+ cpus, 4, nd_table);
}
if (smp_cpus > 1) {
- openrisc_sim_ompic_init(0x98000000, smp_cpus, cpu_irqs, 1);
+ openrisc_sim_ompic_init(0x98000000, smp_cpus, cpus, 1);
- serial_irq = qemu_irq_split(cpu_irqs[0][2], cpu_irqs[1][2]);
+ serial_irq = qemu_irq_split(get_cpu_irq(cpus, 0, 2),
+ get_cpu_irq(cpus, 1, 2));
} else {
- serial_irq = cpu_irqs[0][2];
+ serial_irq = get_cpu_irq(cpus, 0, 2);
}
serial_mm_init(get_system_memory(), 0x90000000, 0, serial_irq,
--
2.20.1
^ permalink raw reply related [flat|nested] 31+ messages in thread
* [PULL 04/20] target/openrisc: Move pic_cpu code into CPU object proper
2020-12-15 14:12 [PULL 00/20] target-arm queue Peter Maydell
` (2 preceding siblings ...)
2020-12-15 14:12 ` [PULL 03/20] hw/openrisc/openrisc_sim: Abstract out "get IRQ x of CPU y" Peter Maydell
@ 2020-12-15 14:12 ` Peter Maydell
2020-12-15 14:12 ` [PULL 05/20] target/nios2: Move IIC " Peter Maydell
` (16 subsequent siblings)
20 siblings, 0 replies; 31+ messages in thread
From: Peter Maydell @ 2020-12-15 14:12 UTC (permalink / raw)
To: qemu-devel
The openrisc code uses an old style of interrupt handling, where a
separate standalone set of qemu_irqs invoke a function
openrisc_pic_cpu_handler() which signals the interrupt to the CPU
proper by directly calling cpu_interrupt() and cpu_reset_interrupt().
Because CPU objects now inherit (indirectly) from TYPE_DEVICE, they
can have GPIO input lines themselves, and the neater modern way to
implement this is to simply have the CPU object itself provide the
input IRQ lines.
Create GPIO inputs to the OpenRISC CPU object, and make the only user
of cpu_openrisc_pic_init() wire up directly to those instead.
This allows us to delete the hw/openrisc/pic_cpu.c file entirely.
This fixes a trivial memory leak reported by Coverity of the IRQs
allocated in cpu_openrisc_pic_init().
Fixes: Coverity CID 1421934
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Stafford Horne <shorne@gmail.com>
Message-id: 20201127225127.14770-4-peter.maydell@linaro.org
---
target/openrisc/cpu.h | 1 -
hw/openrisc/openrisc_sim.c | 3 +-
hw/openrisc/pic_cpu.c | 61 --------------------------------------
target/openrisc/cpu.c | 32 ++++++++++++++++++++
hw/openrisc/meson.build | 2 +-
5 files changed, 34 insertions(+), 65 deletions(-)
delete mode 100644 hw/openrisc/pic_cpu.c
diff --git a/target/openrisc/cpu.h b/target/openrisc/cpu.h
index bd42faf144f..82cbaeb4f84 100644
--- a/target/openrisc/cpu.h
+++ b/target/openrisc/cpu.h
@@ -293,7 +293,6 @@ typedef struct CPUOpenRISCState {
uint32_t picmr; /* Interrupt mask register */
uint32_t picsr; /* Interrupt contrl register*/
#endif
- void *irq[32]; /* Interrupt irq input */
} CPUOpenRISCState;
/**
diff --git a/hw/openrisc/openrisc_sim.c b/hw/openrisc/openrisc_sim.c
index 75ba0f47444..39f1d344ae9 100644
--- a/hw/openrisc/openrisc_sim.c
+++ b/hw/openrisc/openrisc_sim.c
@@ -54,7 +54,7 @@ static void main_cpu_reset(void *opaque)
static qemu_irq get_cpu_irq(OpenRISCCPU *cpus[], int cpunum, int irq_pin)
{
- return cpus[cpunum]->env.irq[irq_pin];
+ return qdev_get_gpio_in_named(DEVICE(cpus[cpunum]), "IRQ", irq_pin);
}
static void openrisc_sim_net_init(hwaddr base, hwaddr descriptors,
@@ -154,7 +154,6 @@ static void openrisc_sim_init(MachineState *machine)
fprintf(stderr, "Unable to find CPU definition!\n");
exit(1);
}
- cpu_openrisc_pic_init(cpus[n]);
cpu_openrisc_clock_init(cpus[n]);
diff --git a/hw/openrisc/pic_cpu.c b/hw/openrisc/pic_cpu.c
deleted file mode 100644
index 36f93508309..00000000000
--- a/hw/openrisc/pic_cpu.c
+++ /dev/null
@@ -1,61 +0,0 @@
-/*
- * OpenRISC Programmable Interrupt Controller support.
- *
- * Copyright (c) 2011-2012 Jia Liu <proljc@gmail.com>
- * Feng Gao <gf91597@gmail.com>
- *
- * This library is free software; you can redistribute it and/or
- * modify it under the terms of the GNU Lesser General Public
- * License as published by the Free Software Foundation; either
- * version 2.1 of the License, or (at your option) any later version.
- *
- * This library is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
- * Lesser General Public License for more details.
- *
- * You should have received a copy of the GNU Lesser General Public
- * License along with this library; if not, see <http://www.gnu.org/licenses/>.
- */
-
-#include "qemu/osdep.h"
-#include "hw/irq.h"
-#include "cpu.h"
-
-/* OpenRISC pic handler */
-static void openrisc_pic_cpu_handler(void *opaque, int irq, int level)
-{
- OpenRISCCPU *cpu = (OpenRISCCPU *)opaque;
- CPUState *cs = CPU(cpu);
- uint32_t irq_bit;
-
- if (irq > 31 || irq < 0) {
- return;
- }
-
- irq_bit = 1U << irq;
-
- if (level) {
- cpu->env.picsr |= irq_bit;
- } else {
- cpu->env.picsr &= ~irq_bit;
- }
-
- if (cpu->env.picsr & cpu->env.picmr) {
- cpu_interrupt(cs, CPU_INTERRUPT_HARD);
- } else {
- cpu_reset_interrupt(cs, CPU_INTERRUPT_HARD);
- cpu->env.picsr = 0;
- }
-}
-
-void cpu_openrisc_pic_init(OpenRISCCPU *cpu)
-{
- int i;
- qemu_irq *qi;
- qi = qemu_allocate_irqs(openrisc_pic_cpu_handler, cpu, NR_IRQS);
-
- for (i = 0; i < NR_IRQS; i++) {
- cpu->env.irq[i] = qi[i];
- }
-}
diff --git a/target/openrisc/cpu.c b/target/openrisc/cpu.c
index 5528c0918f4..b0bdfbe4fe2 100644
--- a/target/openrisc/cpu.c
+++ b/target/openrisc/cpu.c
@@ -65,6 +65,34 @@ static void openrisc_cpu_reset(DeviceState *dev)
#endif
}
+#ifndef CONFIG_USER_ONLY
+static void openrisc_cpu_set_irq(void *opaque, int irq, int level)
+{
+ OpenRISCCPU *cpu = (OpenRISCCPU *)opaque;
+ CPUState *cs = CPU(cpu);
+ uint32_t irq_bit;
+
+ if (irq > 31 || irq < 0) {
+ return;
+ }
+
+ irq_bit = 1U << irq;
+
+ if (level) {
+ cpu->env.picsr |= irq_bit;
+ } else {
+ cpu->env.picsr &= ~irq_bit;
+ }
+
+ if (cpu->env.picsr & cpu->env.picmr) {
+ cpu_interrupt(cs, CPU_INTERRUPT_HARD);
+ } else {
+ cpu_reset_interrupt(cs, CPU_INTERRUPT_HARD);
+ cpu->env.picsr = 0;
+ }
+}
+#endif
+
static void openrisc_cpu_realizefn(DeviceState *dev, Error **errp)
{
CPUState *cs = CPU(dev);
@@ -88,6 +116,10 @@ static void openrisc_cpu_initfn(Object *obj)
OpenRISCCPU *cpu = OPENRISC_CPU(obj);
cpu_set_cpustate_pointers(cpu);
+
+#ifndef CONFIG_USER_ONLY
+ qdev_init_gpio_in_named(DEVICE(cpu), openrisc_cpu_set_irq, "IRQ", NR_IRQS);
+#endif
}
/* CPU models */
diff --git a/hw/openrisc/meson.build b/hw/openrisc/meson.build
index 57c42558e18..947f63ee087 100644
--- a/hw/openrisc/meson.build
+++ b/hw/openrisc/meson.build
@@ -1,5 +1,5 @@
openrisc_ss = ss.source_set()
-openrisc_ss.add(files('pic_cpu.c', 'cputimer.c'))
+openrisc_ss.add(files('cputimer.c'))
openrisc_ss.add(when: 'CONFIG_OR1K_SIM', if_true: files('openrisc_sim.c'))
hw_arch += {'openrisc': openrisc_ss}
--
2.20.1
^ permalink raw reply related [flat|nested] 31+ messages in thread
* [PULL 05/20] target/nios2: Move IIC code into CPU object proper
2020-12-15 14:12 [PULL 00/20] target-arm queue Peter Maydell
` (3 preceding siblings ...)
2020-12-15 14:12 ` [PULL 04/20] target/openrisc: Move pic_cpu code into CPU object proper Peter Maydell
@ 2020-12-15 14:12 ` Peter Maydell
2020-12-15 14:12 ` [PULL 06/20] target/nios2: Move nios2_check_interrupts() into target/nios2 Peter Maydell
` (15 subsequent siblings)
20 siblings, 0 replies; 31+ messages in thread
From: Peter Maydell @ 2020-12-15 14:12 UTC (permalink / raw)
To: qemu-devel
The Nios2 architecture supports two different interrupt controller
options:
* The IIC (Internal Interrupt Controller) is part of the CPU itself;
it has 32 IRQ input lines and no NMI support. Interrupt status is
queried and controlled via the CPU's ipending and istatus
registers.
* The EIC (External Interrupt Controller) interface allows the CPU
to connect to an external interrupt controller. The interface
allows the interrupt controller to present a packet of information
containing:
- handler address
- interrupt level
- register set
- NMI mode
QEMU does not model an EIC currently. We do model the IIC, but its
implementation is split across code in hw/nios2/cpu_pic.c and
hw/intc/nios2_iic.c. The code in those two files has no state of its
own -- the IIC state is in the Nios2CPU state struct.
Because CPU objects now inherit (indirectly) from TYPE_DEVICE, they
can have GPIO input lines themselves, so we can implement the IIC
directly in the CPU object the same way that real hardware does.
Create named "IRQ" GPIO inputs to the Nios2 CPU object, and make the
only user of the IIC wire up directly to those instead.
Note that the old code had an "NMI" concept which was entirely unused
and also as far as I can see not architecturally correct, since only
the EIC has a concept of an NMI.
This fixes a Coverity-reported trivial memory leak of the IRQ array
allocated in nios2_cpu_pic_init().
Fixes: Coverity CID 1421916
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-id: 20201129174022.26530-2-peter.maydell@linaro.org
Reviewed-by: Wentong Wu <wentong.wu@intel.com>
Tested-by: Wentong Wu <wentong.wu@intel.com>
---
target/nios2/cpu.h | 1 -
hw/intc/nios2_iic.c | 95 ---------------------------------------
hw/nios2/10m50_devboard.c | 13 +-----
hw/nios2/cpu_pic.c | 31 -------------
target/nios2/cpu.c | 30 +++++++++++++
MAINTAINERS | 1 -
hw/intc/meson.build | 1 -
7 files changed, 32 insertions(+), 140 deletions(-)
delete mode 100644 hw/intc/nios2_iic.c
diff --git a/target/nios2/cpu.h b/target/nios2/cpu.h
index 86bbe1d8670..b7efb54ba7e 100644
--- a/target/nios2/cpu.h
+++ b/target/nios2/cpu.h
@@ -201,7 +201,6 @@ void nios2_cpu_do_unaligned_access(CPUState *cpu, vaddr addr,
MMUAccessType access_type,
int mmu_idx, uintptr_t retaddr);
-qemu_irq *nios2_cpu_pic_init(Nios2CPU *cpu);
void nios2_check_interrupts(CPUNios2State *env);
void do_nios2_semihosting(CPUNios2State *env);
diff --git a/hw/intc/nios2_iic.c b/hw/intc/nios2_iic.c
deleted file mode 100644
index 216db670594..00000000000
--- a/hw/intc/nios2_iic.c
+++ /dev/null
@@ -1,95 +0,0 @@
-/*
- * QEMU Altera Internal Interrupt Controller.
- *
- * Copyright (c) 2012 Chris Wulff <crwulff@gmail.com>
- *
- * This library is free software; you can redistribute it and/or
- * modify it under the terms of the GNU Lesser General Public
- * License as published by the Free Software Foundation; either
- * version 2.1 of the License, or (at your option) any later version.
- *
- * This library is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
- * Lesser General Public License for more details.
- *
- * You should have received a copy of the GNU Lesser General Public
- * License along with this library; if not, see
- * <http://www.gnu.org/licenses/lgpl-2.1.html>
- */
-
-#include "qemu/osdep.h"
-#include "qemu/module.h"
-#include "qapi/error.h"
-
-#include "hw/irq.h"
-#include "hw/sysbus.h"
-#include "cpu.h"
-#include "qom/object.h"
-
-#define TYPE_ALTERA_IIC "altera,iic"
-OBJECT_DECLARE_SIMPLE_TYPE(AlteraIIC, ALTERA_IIC)
-
-struct AlteraIIC {
- SysBusDevice parent_obj;
- void *cpu;
- qemu_irq parent_irq;
-};
-
-static void update_irq(AlteraIIC *pv)
-{
- CPUNios2State *env = &((Nios2CPU *)(pv->cpu))->env;
-
- qemu_set_irq(pv->parent_irq,
- env->regs[CR_IPENDING] & env->regs[CR_IENABLE]);
-}
-
-static void irq_handler(void *opaque, int irq, int level)
-{
- AlteraIIC *pv = opaque;
- CPUNios2State *env = &((Nios2CPU *)(pv->cpu))->env;
-
- env->regs[CR_IPENDING] &= ~(1 << irq);
- env->regs[CR_IPENDING] |= !!level << irq;
-
- update_irq(pv);
-}
-
-static void altera_iic_init(Object *obj)
-{
- AlteraIIC *pv = ALTERA_IIC(obj);
-
- qdev_init_gpio_in(DEVICE(pv), irq_handler, 32);
- sysbus_init_irq(SYS_BUS_DEVICE(obj), &pv->parent_irq);
-}
-
-static void altera_iic_realize(DeviceState *dev, Error **errp)
-{
- struct AlteraIIC *pv = ALTERA_IIC(dev);
-
- pv->cpu = object_property_get_link(OBJECT(dev), "cpu", &error_abort);
-}
-
-static void altera_iic_class_init(ObjectClass *klass, void *data)
-{
- DeviceClass *dc = DEVICE_CLASS(klass);
-
- /* Reason: needs to be wired up, e.g. by nios2_10m50_ghrd_init() */
- dc->user_creatable = false;
- dc->realize = altera_iic_realize;
-}
-
-static TypeInfo altera_iic_info = {
- .name = TYPE_ALTERA_IIC,
- .parent = TYPE_SYS_BUS_DEVICE,
- .instance_size = sizeof(AlteraIIC),
- .instance_init = altera_iic_init,
- .class_init = altera_iic_class_init,
-};
-
-static void altera_iic_register(void)
-{
- type_register_static(&altera_iic_info);
-}
-
-type_init(altera_iic_register)
diff --git a/hw/nios2/10m50_devboard.c b/hw/nios2/10m50_devboard.c
index 5c13b74306f..a14fc31e86b 100644
--- a/hw/nios2/10m50_devboard.c
+++ b/hw/nios2/10m50_devboard.c
@@ -52,7 +52,7 @@ static void nios2_10m50_ghrd_init(MachineState *machine)
ram_addr_t tcm_size = 0x1000; /* 1 kiB, but QEMU limit is 4 kiB */
ram_addr_t ram_base = 0x08000000;
ram_addr_t ram_size = 0x08000000;
- qemu_irq *cpu_irq, irq[32];
+ qemu_irq irq[32];
int i;
/* Physical TCM (tb_ram_1k) with alias at 0xc0000000 */
@@ -75,17 +75,8 @@ static void nios2_10m50_ghrd_init(MachineState *machine)
/* Create CPU -- FIXME */
cpu = NIOS2_CPU(cpu_create(TYPE_NIOS2_CPU));
-
- /* Register: CPU interrupt controller (PIC) */
- cpu_irq = nios2_cpu_pic_init(cpu);
-
- /* Register: Internal Interrupt Controller (IIC) */
- dev = qdev_new("altera,iic");
- object_property_add_const_link(OBJECT(dev), "cpu", OBJECT(cpu));
- sysbus_realize_and_unref(SYS_BUS_DEVICE(dev), &error_fatal);
- sysbus_connect_irq(SYS_BUS_DEVICE(dev), 0, cpu_irq[0]);
for (i = 0; i < 32; i++) {
- irq[i] = qdev_get_gpio_in(dev, i);
+ irq[i] = qdev_get_gpio_in_named(DEVICE(cpu), "IRQ", i);
}
/* Register: Altera 16550 UART */
diff --git a/hw/nios2/cpu_pic.c b/hw/nios2/cpu_pic.c
index 5ea7e52ab83..3fb621c5c85 100644
--- a/hw/nios2/cpu_pic.c
+++ b/hw/nios2/cpu_pic.c
@@ -26,32 +26,6 @@
#include "boot.h"
-static void nios2_pic_cpu_handler(void *opaque, int irq, int level)
-{
- Nios2CPU *cpu = opaque;
- CPUNios2State *env = &cpu->env;
- CPUState *cs = CPU(cpu);
- int type = irq ? CPU_INTERRUPT_NMI : CPU_INTERRUPT_HARD;
-
- if (type == CPU_INTERRUPT_HARD) {
- env->irq_pending = level;
-
- if (level && (env->regs[CR_STATUS] & CR_STATUS_PIE)) {
- env->irq_pending = 0;
- cpu_interrupt(cs, type);
- } else if (!level) {
- env->irq_pending = 0;
- cpu_reset_interrupt(cs, type);
- }
- } else {
- if (level) {
- cpu_interrupt(cs, type);
- } else {
- cpu_reset_interrupt(cs, type);
- }
- }
-}
-
void nios2_check_interrupts(CPUNios2State *env)
{
if (env->irq_pending &&
@@ -60,8 +34,3 @@ void nios2_check_interrupts(CPUNios2State *env)
cpu_interrupt(env_cpu(env), CPU_INTERRUPT_HARD);
}
}
-
-qemu_irq *nios2_cpu_pic_init(Nios2CPU *cpu)
-{
- return qemu_allocate_irqs(nios2_pic_cpu_handler, cpu, 2);
-}
diff --git a/target/nios2/cpu.c b/target/nios2/cpu.c
index 8f7011fcb92..52ebda89ca7 100644
--- a/target/nios2/cpu.c
+++ b/target/nios2/cpu.c
@@ -64,6 +64,27 @@ static void nios2_cpu_reset(DeviceState *dev)
#endif
}
+#ifndef CONFIG_USER_ONLY
+static void nios2_cpu_set_irq(void *opaque, int irq, int level)
+{
+ Nios2CPU *cpu = opaque;
+ CPUNios2State *env = &cpu->env;
+ CPUState *cs = CPU(cpu);
+
+ env->regs[CR_IPENDING] &= ~(1 << irq);
+ env->regs[CR_IPENDING] |= !!level << irq;
+
+ env->irq_pending = env->regs[CR_IPENDING] & env->regs[CR_IENABLE];
+
+ if (env->irq_pending && (env->regs[CR_STATUS] & CR_STATUS_PIE)) {
+ env->irq_pending = 0;
+ cpu_interrupt(cs, CPU_INTERRUPT_HARD);
+ } else if (!env->irq_pending) {
+ cpu_reset_interrupt(cs, CPU_INTERRUPT_HARD);
+ }
+}
+#endif
+
static void nios2_cpu_initfn(Object *obj)
{
Nios2CPU *cpu = NIOS2_CPU(obj);
@@ -72,6 +93,15 @@ static void nios2_cpu_initfn(Object *obj)
#if !defined(CONFIG_USER_ONLY)
mmu_init(&cpu->env);
+
+ /*
+ * These interrupt lines model the IIC (internal interrupt
+ * controller). QEMU does not currently support the EIC
+ * (external interrupt controller) -- if we did it would be
+ * a separate device in hw/intc with a custom interface to
+ * the CPU, and boards using it would not wire up these IRQ lines.
+ */
+ qdev_init_gpio_in_named(DEVICE(cpu), nios2_cpu_set_irq, "IRQ", 32);
#endif
}
diff --git a/MAINTAINERS b/MAINTAINERS
index 062074e47cd..99293a5e027 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -259,7 +259,6 @@ M: Marek Vasut <marex@denx.de>
S: Maintained
F: target/nios2/
F: hw/nios2/
-F: hw/intc/nios2_iic.c
F: disas/nios2.c
F: default-configs/nios2-softmmu.mak
diff --git a/hw/intc/meson.build b/hw/intc/meson.build
index 3f82cc230ad..7c3e9daf586 100644
--- a/hw/intc/meson.build
+++ b/hw/intc/meson.build
@@ -37,7 +37,6 @@ specific_ss.add(when: 'CONFIG_IBEX', if_true: files('ibex_plic.c'))
specific_ss.add(when: 'CONFIG_IOAPIC', if_true: files('ioapic.c'))
specific_ss.add(when: 'CONFIG_LOONGSON_LIOINTC', if_true: files('loongson_liointc.c'))
specific_ss.add(when: 'CONFIG_MIPS_CPS', if_true: files('mips_gic.c'))
-specific_ss.add(when: 'CONFIG_NIOS2', if_true: files('nios2_iic.c'))
specific_ss.add(when: 'CONFIG_OMAP', if_true: files('omap_intc.c'))
specific_ss.add(when: 'CONFIG_OMPIC', if_true: files('ompic.c'))
specific_ss.add(when: 'CONFIG_OPENPIC_KVM', if_true: files('openpic_kvm.c'))
--
2.20.1
^ permalink raw reply related [flat|nested] 31+ messages in thread
* [PULL 06/20] target/nios2: Move nios2_check_interrupts() into target/nios2
2020-12-15 14:12 [PULL 00/20] target-arm queue Peter Maydell
` (4 preceding siblings ...)
2020-12-15 14:12 ` [PULL 05/20] target/nios2: Move IIC " Peter Maydell
@ 2020-12-15 14:12 ` Peter Maydell
2020-12-15 14:12 ` [PULL 07/20] target/nios2: Use deposit32() to update ipending register Peter Maydell
` (14 subsequent siblings)
20 siblings, 0 replies; 31+ messages in thread
From: Peter Maydell @ 2020-12-15 14:12 UTC (permalink / raw)
To: qemu-devel
The function nios2_check_interrupts)() looks only at CPU-internal
state; it belongs in target/nios2, not hw/nios2. Move it into the
same file as its only caller, so it can just be local to that file.
This removes the only remaining code from cpu_pic.c, so we can delete
that file entirely.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-id: 20201129174022.26530-3-peter.maydell@linaro.org
Reviewed-by: Wentong Wu <wentong.wu@intel.com>
Tested-by: Wentong Wu <wentong.wu@intel.com>
---
target/nios2/cpu.h | 2 --
hw/nios2/cpu_pic.c | 36 ------------------------------------
target/nios2/op_helper.c | 9 +++++++++
hw/nios2/meson.build | 2 +-
4 files changed, 10 insertions(+), 39 deletions(-)
delete mode 100644 hw/nios2/cpu_pic.c
diff --git a/target/nios2/cpu.h b/target/nios2/cpu.h
index b7efb54ba7e..2ab82fdc713 100644
--- a/target/nios2/cpu.h
+++ b/target/nios2/cpu.h
@@ -201,8 +201,6 @@ void nios2_cpu_do_unaligned_access(CPUState *cpu, vaddr addr,
MMUAccessType access_type,
int mmu_idx, uintptr_t retaddr);
-void nios2_check_interrupts(CPUNios2State *env);
-
void do_nios2_semihosting(CPUNios2State *env);
#define CPU_RESOLVING_TYPE TYPE_NIOS2_CPU
diff --git a/hw/nios2/cpu_pic.c b/hw/nios2/cpu_pic.c
deleted file mode 100644
index 3fb621c5c85..00000000000
--- a/hw/nios2/cpu_pic.c
+++ /dev/null
@@ -1,36 +0,0 @@
-/*
- * Altera Nios2 CPU PIC
- *
- * Copyright (c) 2016 Marek Vasut <marek.vasut@gmail.com>
- *
- * This library is free software; you can redistribute it and/or
- * modify it under the terms of the GNU Lesser General Public
- * License as published by the Free Software Foundation; either
- * version 2.1 of the License, or (at your option) any later version.
- *
- * This library is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
- * Lesser General Public License for more details.
- *
- * You should have received a copy of the GNU Lesser General Public
- * License along with this library; if not, see
- * <http://www.gnu.org/licenses/lgpl-2.1.html>
- */
-
-#include "qemu/osdep.h"
-#include "cpu.h"
-#include "hw/irq.h"
-
-#include "qemu/config-file.h"
-
-#include "boot.h"
-
-void nios2_check_interrupts(CPUNios2State *env)
-{
- if (env->irq_pending &&
- (env->regs[CR_STATUS] & CR_STATUS_PIE)) {
- env->irq_pending = 0;
- cpu_interrupt(env_cpu(env), CPU_INTERRUPT_HARD);
- }
-}
diff --git a/target/nios2/op_helper.c b/target/nios2/op_helper.c
index a60730faac3..a59003855ab 100644
--- a/target/nios2/op_helper.c
+++ b/target/nios2/op_helper.c
@@ -36,6 +36,15 @@ void helper_mmu_write(CPUNios2State *env, uint32_t rn, uint32_t v)
mmu_write(env, rn, v);
}
+static void nios2_check_interrupts(CPUNios2State *env)
+{
+ if (env->irq_pending &&
+ (env->regs[CR_STATUS] & CR_STATUS_PIE)) {
+ env->irq_pending = 0;
+ cpu_interrupt(env_cpu(env), CPU_INTERRUPT_HARD);
+ }
+}
+
void helper_check_interrupts(CPUNios2State *env)
{
qemu_mutex_lock_iothread();
diff --git a/hw/nios2/meson.build b/hw/nios2/meson.build
index dd66ebb32f6..6c58e8082b4 100644
--- a/hw/nios2/meson.build
+++ b/hw/nios2/meson.build
@@ -1,5 +1,5 @@
nios2_ss = ss.source_set()
-nios2_ss.add(files('boot.c', 'cpu_pic.c'))
+nios2_ss.add(files('boot.c'))
nios2_ss.add(when: 'CONFIG_NIOS2_10M50', if_true: files('10m50_devboard.c'))
nios2_ss.add(when: 'CONFIG_NIOS2_GENERIC_NOMMU', if_true: files('generic_nommu.c'))
--
2.20.1
^ permalink raw reply related [flat|nested] 31+ messages in thread
* [PULL 07/20] target/nios2: Use deposit32() to update ipending register
2020-12-15 14:12 [PULL 00/20] target-arm queue Peter Maydell
` (5 preceding siblings ...)
2020-12-15 14:12 ` [PULL 06/20] target/nios2: Move nios2_check_interrupts() into target/nios2 Peter Maydell
@ 2020-12-15 14:12 ` Peter Maydell
2020-12-15 14:12 ` [PULL 08/20] hw/core/loader.c: Track last-seen ROM in rom_check_and_register_reset() Peter Maydell
` (13 subsequent siblings)
20 siblings, 0 replies; 31+ messages in thread
From: Peter Maydell @ 2020-12-15 14:12 UTC (permalink / raw)
To: qemu-devel
In nios2_cpu_set_irq(), use deposit32() rather than raw shift-and-mask
operations to set the appropriate bit in the ipending register.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-id: 20201129174022.26530-4-peter.maydell@linaro.org
---
target/nios2/cpu.c | 3 +--
1 file changed, 1 insertion(+), 2 deletions(-)
diff --git a/target/nios2/cpu.c b/target/nios2/cpu.c
index 52ebda89ca7..58688e1623a 100644
--- a/target/nios2/cpu.c
+++ b/target/nios2/cpu.c
@@ -71,8 +71,7 @@ static void nios2_cpu_set_irq(void *opaque, int irq, int level)
CPUNios2State *env = &cpu->env;
CPUState *cs = CPU(cpu);
- env->regs[CR_IPENDING] &= ~(1 << irq);
- env->regs[CR_IPENDING] |= !!level << irq;
+ env->regs[CR_IPENDING] = deposit32(env->regs[CR_IPENDING], irq, 1, !!level);
env->irq_pending = env->regs[CR_IPENDING] & env->regs[CR_IENABLE];
--
2.20.1
^ permalink raw reply related [flat|nested] 31+ messages in thread
* [PULL 08/20] hw/core/loader.c: Track last-seen ROM in rom_check_and_register_reset()
2020-12-15 14:12 [PULL 00/20] target-arm queue Peter Maydell
` (6 preceding siblings ...)
2020-12-15 14:12 ` [PULL 07/20] target/nios2: Use deposit32() to update ipending register Peter Maydell
@ 2020-12-15 14:12 ` Peter Maydell
2020-12-15 14:12 ` [PULL 09/20] hw/core/loader.c: Improve reporting of ROM overlap errors Peter Maydell
` (12 subsequent siblings)
20 siblings, 0 replies; 31+ messages in thread
From: Peter Maydell @ 2020-12-15 14:12 UTC (permalink / raw)
To: qemu-devel
In rom_check_and_register_reset() we detect overlaps by looking at
whether the ROM blob we're currently examining is in the same address
space and starts before the previous ROM blob ends. (This works
because the ROM list is kept sorted in order by AddressSpace and then
by address.)
Instead of keeping the AddressSpace and last address of the previous ROM
blob in local variables, just keep a pointer to it.
This will allow us to print more useful information when we do detect
an overlap.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20201129203923.10622-2-peter.maydell@linaro.org
---
hw/core/loader.c | 23 +++++++++++++++--------
1 file changed, 15 insertions(+), 8 deletions(-)
diff --git a/hw/core/loader.c b/hw/core/loader.c
index fea22d265c7..45aaba6158b 100644
--- a/hw/core/loader.c
+++ b/hw/core/loader.c
@@ -1166,28 +1166,35 @@ static void rom_reset(void *unused)
}
}
+/* Return true if two consecutive ROMs in the ROM list overlap */
+static bool roms_overlap(Rom *last_rom, Rom *this_rom)
+{
+ if (!last_rom) {
+ return false;
+ }
+ return last_rom->as == this_rom->as &&
+ last_rom->addr + last_rom->romsize > this_rom->addr;
+}
+
int rom_check_and_register_reset(void)
{
- hwaddr addr = 0;
MemoryRegionSection section;
- Rom *rom;
- AddressSpace *as = NULL;
+ Rom *rom, *last_rom = NULL;
QTAILQ_FOREACH(rom, &roms, next) {
if (rom->fw_file) {
continue;
}
if (!rom->mr) {
- if ((addr > rom->addr) && (as == rom->as)) {
+ if (roms_overlap(last_rom, rom)) {
fprintf(stderr, "rom: requested regions overlap "
"(rom %s. free=0x" TARGET_FMT_plx
", addr=0x" TARGET_FMT_plx ")\n",
- rom->name, addr, rom->addr);
+ rom->name, last_rom->addr + last_rom->romsize,
+ rom->addr);
return -1;
}
- addr = rom->addr;
- addr += rom->romsize;
- as = rom->as;
+ last_rom = rom;
}
section = memory_region_find(rom->mr ? rom->mr : get_system_memory(),
rom->addr, 1);
--
2.20.1
^ permalink raw reply related [flat|nested] 31+ messages in thread
* [PULL 09/20] hw/core/loader.c: Improve reporting of ROM overlap errors
2020-12-15 14:12 [PULL 00/20] target-arm queue Peter Maydell
` (7 preceding siblings ...)
2020-12-15 14:12 ` [PULL 08/20] hw/core/loader.c: Track last-seen ROM in rom_check_and_register_reset() Peter Maydell
@ 2020-12-15 14:12 ` Peter Maydell
2020-12-15 14:12 ` [PULL 10/20] elf_ops.h: Don't truncate name of the ROM blobs we create Peter Maydell
` (11 subsequent siblings)
20 siblings, 0 replies; 31+ messages in thread
From: Peter Maydell @ 2020-12-15 14:12 UTC (permalink / raw)
To: qemu-devel
In rom_check_and_register_reset() we report to the user if there is
a "ROM region overlap". This has a couple of problems:
* the reported information is not very easy to intepret
* the function just prints the overlap to stderr (and relies on
its single callsite in vl.c to do an error_report() and exit)
* only the first overlap encountered is diagnosed
Make this function use error_report() and error_printf() and
report a more user-friendly report with all the overlaps
diagnosed.
Sample old output:
rom: requested regions overlap (rom dtb. free=0x0000000000008000, addr=0x0000000000000000)
qemu-system-aarch64: rom check and register reset failed
Sample new output:
qemu-system-aarch64: Some ROM regions are overlapping
These ROM regions might have been loaded by direct user request or by default.
They could be BIOS/firmware images, a guest kernel, initrd or some other file loaded into guest memory.
Check whether you intended to load all this guest code, and whether it has been built to load to the correct addresses.
The following two regions overlap (in the cpu-memory-0 address space):
phdr #0: /home/petmay01/linaro/qemu-misc-tests/ldmia-fault.axf (addresses 0x0000000000000000 - 0x0000000000008000)
dtb (addresses 0x0000000000000000 - 0x0000000000100000)
The following two regions overlap (in the cpu-memory-0 address space):
phdr #1: /home/petmay01/linaro/qemu-misc-tests/bad-psci-call.axf (addresses 0x0000000040000000 - 0x0000000040000010)
phdr #0: /home/petmay01/linaro/qemu-misc-tests/bp-test.elf (addresses 0x0000000040000000 - 0x0000000040000020)
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20201129203923.10622-3-peter.maydell@linaro.org
---
hw/core/loader.c | 48 ++++++++++++++++++++++++++++++++++++++++++------
softmmu/vl.c | 1 -
2 files changed, 42 insertions(+), 7 deletions(-)
diff --git a/hw/core/loader.c b/hw/core/loader.c
index 45aaba6158b..9feca32de98 100644
--- a/hw/core/loader.c
+++ b/hw/core/loader.c
@@ -1176,10 +1176,42 @@ static bool roms_overlap(Rom *last_rom, Rom *this_rom)
last_rom->addr + last_rom->romsize > this_rom->addr;
}
+static const char *rom_as_name(Rom *rom)
+{
+ const char *name = rom->as ? rom->as->name : NULL;
+ return name ?: "anonymous";
+}
+
+static void rom_print_overlap_error_header(void)
+{
+ error_report("Some ROM regions are overlapping");
+ error_printf(
+ "These ROM regions might have been loaded by "
+ "direct user request or by default.\n"
+ "They could be BIOS/firmware images, a guest kernel, "
+ "initrd or some other file loaded into guest memory.\n"
+ "Check whether you intended to load all this guest code, and "
+ "whether it has been built to load to the correct addresses.\n");
+}
+
+static void rom_print_one_overlap_error(Rom *last_rom, Rom *rom)
+{
+ error_printf(
+ "\nThe following two regions overlap (in the %s address space):\n",
+ rom_as_name(rom));
+ error_printf(
+ " %s (addresses 0x" TARGET_FMT_plx " - 0x" TARGET_FMT_plx ")\n",
+ last_rom->name, last_rom->addr, last_rom->addr + last_rom->romsize);
+ error_printf(
+ " %s (addresses 0x" TARGET_FMT_plx " - 0x" TARGET_FMT_plx ")\n",
+ rom->name, rom->addr, rom->addr + rom->romsize);
+}
+
int rom_check_and_register_reset(void)
{
MemoryRegionSection section;
Rom *rom, *last_rom = NULL;
+ bool found_overlap = false;
QTAILQ_FOREACH(rom, &roms, next) {
if (rom->fw_file) {
@@ -1187,12 +1219,12 @@ int rom_check_and_register_reset(void)
}
if (!rom->mr) {
if (roms_overlap(last_rom, rom)) {
- fprintf(stderr, "rom: requested regions overlap "
- "(rom %s. free=0x" TARGET_FMT_plx
- ", addr=0x" TARGET_FMT_plx ")\n",
- rom->name, last_rom->addr + last_rom->romsize,
- rom->addr);
- return -1;
+ if (!found_overlap) {
+ found_overlap = true;
+ rom_print_overlap_error_header();
+ }
+ rom_print_one_overlap_error(last_rom, rom);
+ /* Keep going through the list so we report all overlaps */
}
last_rom = rom;
}
@@ -1201,6 +1233,10 @@ int rom_check_and_register_reset(void)
rom->isrom = int128_nz(section.size) && memory_region_is_rom(section.mr);
memory_region_unref(section.mr);
}
+ if (found_overlap) {
+ return -1;
+ }
+
qemu_register_reset(rom_reset, NULL);
roms_loaded = 1;
return 0;
diff --git a/softmmu/vl.c b/softmmu/vl.c
index 7146fbe2198..cbf3896ce66 100644
--- a/softmmu/vl.c
+++ b/softmmu/vl.c
@@ -3278,7 +3278,6 @@ static void qemu_machine_creation_done(void)
qemu_run_machine_init_done_notifiers();
if (rom_check_and_register_reset() != 0) {
- error_report("rom check and register reset failed");
exit(1);
}
--
2.20.1
^ permalink raw reply related [flat|nested] 31+ messages in thread
* [PULL 10/20] elf_ops.h: Don't truncate name of the ROM blobs we create
2020-12-15 14:12 [PULL 00/20] target-arm queue Peter Maydell
` (8 preceding siblings ...)
2020-12-15 14:12 ` [PULL 09/20] hw/core/loader.c: Improve reporting of ROM overlap errors Peter Maydell
@ 2020-12-15 14:12 ` Peter Maydell
2020-12-15 14:12 ` [PULL 11/20] elf_ops.h: Be more verbose with ROM blob names Peter Maydell
` (10 subsequent siblings)
20 siblings, 0 replies; 31+ messages in thread
From: Peter Maydell @ 2020-12-15 14:12 UTC (permalink / raw)
To: qemu-devel
Currently the load_elf code assembles the ROM blob name into a
local 128 byte fixed-size array. Use g_strdup_printf() instead so
that we don't truncate the pathname if it happens to be long.
(This matters mostly for monitor 'info roms' output and for the
error messages if ROM blobs overlap.)
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20201129203923.10622-4-peter.maydell@linaro.org
---
include/hw/elf_ops.h | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/include/hw/elf_ops.h b/include/hw/elf_ops.h
index 6fdff3dced5..53e0152af53 100644
--- a/include/hw/elf_ops.h
+++ b/include/hw/elf_ops.h
@@ -330,7 +330,6 @@ static int glue(load_elf, SZ)(const char *name, int fd,
uint64_t addr, low = (uint64_t)-1, high = 0;
GMappedFile *mapped_file = NULL;
uint8_t *data = NULL;
- char label[128];
int ret = ELF_LOAD_FAILED;
if (read(fd, &ehdr, sizeof(ehdr)) != sizeof(ehdr))
@@ -544,7 +543,8 @@ static int glue(load_elf, SZ)(const char *name, int fd,
*/
if (mem_size != 0) {
if (load_rom) {
- snprintf(label, sizeof(label), "phdr #%d: %s", i, name);
+ g_autofree char *label =
+ g_strdup_printf("phdr #%d: %s", i, name);
/*
* rom_add_elf_program() takes its own reference to
--
2.20.1
^ permalink raw reply related [flat|nested] 31+ messages in thread
* [PULL 11/20] elf_ops.h: Be more verbose with ROM blob names
2020-12-15 14:12 [PULL 00/20] target-arm queue Peter Maydell
` (9 preceding siblings ...)
2020-12-15 14:12 ` [PULL 10/20] elf_ops.h: Don't truncate name of the ROM blobs we create Peter Maydell
@ 2020-12-15 14:12 ` Peter Maydell
2020-12-15 14:12 ` [PULL 12/20] usb: Add versal-usb2-ctrl-regs module Peter Maydell
` (9 subsequent siblings)
20 siblings, 0 replies; 31+ messages in thread
From: Peter Maydell @ 2020-12-15 14:12 UTC (permalink / raw)
To: qemu-devel
Instead of making the ROM blob name something like:
phdr #0: /home/petmay01/linaro/qemu-misc-tests/ldmia-fault.axf
make it a little more self-explanatory for people who don't know
ELF format details:
/home/petmay01/linaro/qemu-misc-tests/ldmia-fault.axf ELF program header segment 0
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20201129203923.10622-5-peter.maydell@linaro.org
---
include/hw/elf_ops.h | 3 ++-
1 file changed, 2 insertions(+), 1 deletion(-)
diff --git a/include/hw/elf_ops.h b/include/hw/elf_ops.h
index 53e0152af53..8e8436831d2 100644
--- a/include/hw/elf_ops.h
+++ b/include/hw/elf_ops.h
@@ -544,7 +544,8 @@ static int glue(load_elf, SZ)(const char *name, int fd,
if (mem_size != 0) {
if (load_rom) {
g_autofree char *label =
- g_strdup_printf("phdr #%d: %s", i, name);
+ g_strdup_printf("%s ELF program header segment %d",
+ name, i);
/*
* rom_add_elf_program() takes its own reference to
--
2.20.1
^ permalink raw reply related [flat|nested] 31+ messages in thread
* [PULL 12/20] usb: Add versal-usb2-ctrl-regs module
2020-12-15 14:12 [PULL 00/20] target-arm queue Peter Maydell
` (10 preceding siblings ...)
2020-12-15 14:12 ` [PULL 11/20] elf_ops.h: Be more verbose with ROM blob names Peter Maydell
@ 2020-12-15 14:12 ` Peter Maydell
2020-12-15 14:12 ` [PULL 13/20] usb: Add DWC3 model Peter Maydell
` (8 subsequent siblings)
20 siblings, 0 replies; 31+ messages in thread
From: Peter Maydell @ 2020-12-15 14:12 UTC (permalink / raw)
To: qemu-devel
From: Sai Pavan Boddu <sai.pavan.boddu@xilinx.com>
This module emulates control registers of versal usb2 controller, this is added
just to make guest happy. In general this module would control the phy-reset
signal from usb controller, data coherency of the transactions, signals
the host system errors received from controller.
Signed-off-by: Sai Pavan Boddu <sai.pavan.boddu@xilinx.com>
Signed-off-by: Vikram Garhwal <fnu.vikram@xilinx.com>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 1607023357-5096-2-git-send-email-sai.pavan.boddu@xilinx.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
---
include/hw/usb/xlnx-versal-usb2-ctrl-regs.h | 45 ++++
hw/usb/xlnx-versal-usb2-ctrl-regs.c | 229 ++++++++++++++++++++
hw/usb/meson.build | 1 +
3 files changed, 275 insertions(+)
create mode 100644 include/hw/usb/xlnx-versal-usb2-ctrl-regs.h
create mode 100644 hw/usb/xlnx-versal-usb2-ctrl-regs.c
diff --git a/include/hw/usb/xlnx-versal-usb2-ctrl-regs.h b/include/hw/usb/xlnx-versal-usb2-ctrl-regs.h
new file mode 100644
index 00000000000..975a717627a
--- /dev/null
+++ b/include/hw/usb/xlnx-versal-usb2-ctrl-regs.h
@@ -0,0 +1,45 @@
+/*
+ * QEMU model of the VersalUsb2CtrlRegs Register control/Status block for
+ * USB2.0 controller
+ *
+ * Copyright (c) 2020 Xilinx Inc. Vikram Garhwal <fnu.vikram@xilinx.com>
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a copy
+ * of this software and associated documentation files (the "Software"), to deal
+ * in the Software without restriction, including without limitation the rights
+ * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
+ * copies of the Software, and to permit persons to whom the Software is
+ * furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice shall be included in
+ * all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
+ * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+ * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
+ * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
+ * THE SOFTWARE.
+ */
+
+#ifndef _XLNX_USB2_REGS_H_
+#define _XLNX_USB2_REGS_H_
+
+#define TYPE_XILINX_VERSAL_USB2_CTRL_REGS "xlnx.versal-usb2-ctrl-regs"
+
+#define XILINX_VERSAL_USB2_CTRL_REGS(obj) \
+ OBJECT_CHECK(VersalUsb2CtrlRegs, (obj), TYPE_XILINX_VERSAL_USB2_CTRL_REGS)
+
+#define USB2_REGS_R_MAX ((0x78 / 4) + 1)
+
+typedef struct VersalUsb2CtrlRegs {
+ SysBusDevice parent_obj;
+ MemoryRegion iomem;
+ qemu_irq irq_ir;
+
+ uint32_t regs[USB2_REGS_R_MAX];
+ RegisterInfo regs_info[USB2_REGS_R_MAX];
+} VersalUsb2CtrlRegs;
+
+#endif
diff --git a/hw/usb/xlnx-versal-usb2-ctrl-regs.c b/hw/usb/xlnx-versal-usb2-ctrl-regs.c
new file mode 100644
index 00000000000..9eaa59ebb8b
--- /dev/null
+++ b/hw/usb/xlnx-versal-usb2-ctrl-regs.c
@@ -0,0 +1,229 @@
+/*
+ * QEMU model of the VersalUsb2CtrlRegs Register control/Status block for
+ * USB2.0 controller
+ *
+ * This module should control phy_reset, permanent device plugs, frame length
+ * time adjust & setting of coherency paths. None of which are emulated in
+ * present model.
+ *
+ * Copyright (c) 2020 Xilinx Inc. Vikram Garhwal <fnu.vikram@xilinx.com>
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a copy
+ * of this software and associated documentation files (the "Software"), to deal
+ * in the Software without restriction, including without limitation the rights
+ * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
+ * copies of the Software, and to permit persons to whom the Software is
+ * furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice shall be included in
+ * all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
+ * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+ * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
+ * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
+ * THE SOFTWARE.
+ */
+
+#include "qemu/osdep.h"
+#include "hw/sysbus.h"
+#include "hw/irq.h"
+#include "hw/register.h"
+#include "qemu/bitops.h"
+#include "qemu/log.h"
+#include "qom/object.h"
+#include "migration/vmstate.h"
+#include "hw/usb/xlnx-versal-usb2-ctrl-regs.h"
+
+#ifndef XILINX_VERSAL_USB2_CTRL_REGS_ERR_DEBUG
+#define XILINX_VERSAL_USB2_CTRL_REGS_ERR_DEBUG 0
+#endif
+
+REG32(BUS_FILTER, 0x30)
+ FIELD(BUS_FILTER, BYPASS, 0, 4)
+REG32(PORT, 0x34)
+ FIELD(PORT, HOST_SMI_BAR_WR, 4, 1)
+ FIELD(PORT, HOST_SMI_PCI_CMD_REG_WR, 3, 1)
+ FIELD(PORT, HOST_MSI_ENABLE, 2, 1)
+ FIELD(PORT, PWR_CTRL_PRSNT, 1, 1)
+ FIELD(PORT, HUB_PERM_ATTACH, 0, 1)
+REG32(JITTER_ADJUST, 0x38)
+ FIELD(JITTER_ADJUST, FLADJ, 0, 6)
+REG32(BIGENDIAN, 0x40)
+ FIELD(BIGENDIAN, ENDIAN_GS, 0, 1)
+REG32(COHERENCY, 0x44)
+ FIELD(COHERENCY, USB_COHERENCY, 0, 1)
+REG32(XHC_BME, 0x48)
+ FIELD(XHC_BME, XHC_BME, 0, 1)
+REG32(REG_CTRL, 0x60)
+ FIELD(REG_CTRL, SLVERR_ENABLE, 0, 1)
+REG32(IR_STATUS, 0x64)
+ FIELD(IR_STATUS, HOST_SYS_ERR, 1, 1)
+ FIELD(IR_STATUS, ADDR_DEC_ERR, 0, 1)
+REG32(IR_MASK, 0x68)
+ FIELD(IR_MASK, HOST_SYS_ERR, 1, 1)
+ FIELD(IR_MASK, ADDR_DEC_ERR, 0, 1)
+REG32(IR_ENABLE, 0x6c)
+ FIELD(IR_ENABLE, HOST_SYS_ERR, 1, 1)
+ FIELD(IR_ENABLE, ADDR_DEC_ERR, 0, 1)
+REG32(IR_DISABLE, 0x70)
+ FIELD(IR_DISABLE, HOST_SYS_ERR, 1, 1)
+ FIELD(IR_DISABLE, ADDR_DEC_ERR, 0, 1)
+REG32(USB3, 0x78)
+
+static void ir_update_irq(VersalUsb2CtrlRegs *s)
+{
+ bool pending = s->regs[R_IR_STATUS] & ~s->regs[R_IR_MASK];
+ qemu_set_irq(s->irq_ir, pending);
+}
+
+static void ir_status_postw(RegisterInfo *reg, uint64_t val64)
+{
+ VersalUsb2CtrlRegs *s = XILINX_VERSAL_USB2_CTRL_REGS(reg->opaque);
+ /*
+ * TODO: This should also clear USBSTS.HSE field in USB XHCI register.
+ * May be combine both the modules.
+ */
+ ir_update_irq(s);
+}
+
+static uint64_t ir_enable_prew(RegisterInfo *reg, uint64_t val64)
+{
+ VersalUsb2CtrlRegs *s = XILINX_VERSAL_USB2_CTRL_REGS(reg->opaque);
+ uint32_t val = val64;
+
+ s->regs[R_IR_MASK] &= ~val;
+ ir_update_irq(s);
+ return 0;
+}
+
+static uint64_t ir_disable_prew(RegisterInfo *reg, uint64_t val64)
+{
+ VersalUsb2CtrlRegs *s = XILINX_VERSAL_USB2_CTRL_REGS(reg->opaque);
+ uint32_t val = val64;
+
+ s->regs[R_IR_MASK] |= val;
+ ir_update_irq(s);
+ return 0;
+}
+
+static const RegisterAccessInfo usb2_ctrl_regs_regs_info[] = {
+ { .name = "BUS_FILTER", .addr = A_BUS_FILTER,
+ .rsvd = 0xfffffff0,
+ },{ .name = "PORT", .addr = A_PORT,
+ .rsvd = 0xffffffe0,
+ },{ .name = "JITTER_ADJUST", .addr = A_JITTER_ADJUST,
+ .reset = 0x20,
+ .rsvd = 0xffffffc0,
+ },{ .name = "BIGENDIAN", .addr = A_BIGENDIAN,
+ .rsvd = 0xfffffffe,
+ },{ .name = "COHERENCY", .addr = A_COHERENCY,
+ .rsvd = 0xfffffffe,
+ },{ .name = "XHC_BME", .addr = A_XHC_BME,
+ .reset = 0x1,
+ .rsvd = 0xfffffffe,
+ },{ .name = "REG_CTRL", .addr = A_REG_CTRL,
+ .rsvd = 0xfffffffe,
+ },{ .name = "IR_STATUS", .addr = A_IR_STATUS,
+ .rsvd = 0xfffffffc,
+ .w1c = 0x3,
+ .post_write = ir_status_postw,
+ },{ .name = "IR_MASK", .addr = A_IR_MASK,
+ .reset = 0x3,
+ .rsvd = 0xfffffffc,
+ .ro = 0x3,
+ },{ .name = "IR_ENABLE", .addr = A_IR_ENABLE,
+ .rsvd = 0xfffffffc,
+ .pre_write = ir_enable_prew,
+ },{ .name = "IR_DISABLE", .addr = A_IR_DISABLE,
+ .rsvd = 0xfffffffc,
+ .pre_write = ir_disable_prew,
+ },{ .name = "USB3", .addr = A_USB3,
+ }
+};
+
+static void usb2_ctrl_regs_reset_init(Object *obj, ResetType type)
+{
+ VersalUsb2CtrlRegs *s = XILINX_VERSAL_USB2_CTRL_REGS(obj);
+ unsigned int i;
+
+ for (i = 0; i < ARRAY_SIZE(s->regs_info); ++i) {
+ register_reset(&s->regs_info[i]);
+ }
+}
+
+static void usb2_ctrl_regs_reset_hold(Object *obj)
+{
+ VersalUsb2CtrlRegs *s = XILINX_VERSAL_USB2_CTRL_REGS(obj);
+
+ ir_update_irq(s);
+}
+
+static const MemoryRegionOps usb2_ctrl_regs_ops = {
+ .read = register_read_memory,
+ .write = register_write_memory,
+ .endianness = DEVICE_LITTLE_ENDIAN,
+ .valid = {
+ .min_access_size = 4,
+ .max_access_size = 4,
+ },
+};
+
+static void usb2_ctrl_regs_init(Object *obj)
+{
+ VersalUsb2CtrlRegs *s = XILINX_VERSAL_USB2_CTRL_REGS(obj);
+ SysBusDevice *sbd = SYS_BUS_DEVICE(obj);
+ RegisterInfoArray *reg_array;
+
+ memory_region_init(&s->iomem, obj, TYPE_XILINX_VERSAL_USB2_CTRL_REGS,
+ USB2_REGS_R_MAX * 4);
+ reg_array =
+ register_init_block32(DEVICE(obj), usb2_ctrl_regs_regs_info,
+ ARRAY_SIZE(usb2_ctrl_regs_regs_info),
+ s->regs_info, s->regs,
+ &usb2_ctrl_regs_ops,
+ XILINX_VERSAL_USB2_CTRL_REGS_ERR_DEBUG,
+ USB2_REGS_R_MAX * 4);
+ memory_region_add_subregion(&s->iomem,
+ 0x0,
+ ®_array->mem);
+ sysbus_init_mmio(sbd, &s->iomem);
+ sysbus_init_irq(sbd, &s->irq_ir);
+}
+
+static const VMStateDescription vmstate_usb2_ctrl_regs = {
+ .name = TYPE_XILINX_VERSAL_USB2_CTRL_REGS,
+ .version_id = 1,
+ .minimum_version_id = 1,
+ .fields = (VMStateField[]) {
+ VMSTATE_UINT32_ARRAY(regs, VersalUsb2CtrlRegs, USB2_REGS_R_MAX),
+ VMSTATE_END_OF_LIST(),
+ }
+};
+
+static void usb2_ctrl_regs_class_init(ObjectClass *klass, void *data)
+{
+ DeviceClass *dc = DEVICE_CLASS(klass);
+ ResettableClass *rc = RESETTABLE_CLASS(klass);
+
+ rc->phases.enter = usb2_ctrl_regs_reset_init;
+ rc->phases.hold = usb2_ctrl_regs_reset_hold;
+ dc->vmsd = &vmstate_usb2_ctrl_regs;
+}
+
+static const TypeInfo usb2_ctrl_regs_info = {
+ .name = TYPE_XILINX_VERSAL_USB2_CTRL_REGS,
+ .parent = TYPE_SYS_BUS_DEVICE,
+ .instance_size = sizeof(VersalUsb2CtrlRegs),
+ .class_init = usb2_ctrl_regs_class_init,
+ .instance_init = usb2_ctrl_regs_init,
+};
+
+static void usb2_ctrl_regs_register_types(void)
+{
+ type_register_static(&usb2_ctrl_regs_info);
+}
+
+type_init(usb2_ctrl_regs_register_types)
diff --git a/hw/usb/meson.build b/hw/usb/meson.build
index 934e4fa6755..ecfec0a8f46 100644
--- a/hw/usb/meson.build
+++ b/hw/usb/meson.build
@@ -30,6 +30,7 @@ softmmu_ss.add(when: 'CONFIG_USB_DWC2', if_true: files('hcd-dwc2.c'))
softmmu_ss.add(when: 'CONFIG_TUSB6010', if_true: files('tusb6010.c'))
softmmu_ss.add(when: 'CONFIG_IMX', if_true: files('chipidea.c'))
softmmu_ss.add(when: 'CONFIG_IMX_USBPHY', if_true: files('imx-usb-phy.c'))
+specific_ss.add(when: 'CONFIG_XLNX_VERSAL', if_true: files('xlnx-versal-usb2-ctrl-regs.c'))
# emulated usb devices
softmmu_ss.add(when: 'CONFIG_USB', if_true: files('dev-hub.c'))
--
2.20.1
^ permalink raw reply related [flat|nested] 31+ messages in thread
* [PULL 13/20] usb: Add DWC3 model
2020-12-15 14:12 [PULL 00/20] target-arm queue Peter Maydell
` (11 preceding siblings ...)
2020-12-15 14:12 ` [PULL 12/20] usb: Add versal-usb2-ctrl-regs module Peter Maydell
@ 2020-12-15 14:12 ` Peter Maydell
2020-12-15 14:12 ` [PULL 14/20] usb: xlnx-usb-subsystem: Add xilinx usb subsystem Peter Maydell
` (7 subsequent siblings)
20 siblings, 0 replies; 31+ messages in thread
From: Peter Maydell @ 2020-12-15 14:12 UTC (permalink / raw)
To: qemu-devel
From: Vikram Garhwal <fnu.vikram@xilinx.com>
This patch adds skeleton model of dwc3 usb controller attached to
xhci-sysbus device. It defines global register space of DWC3 controller,
global registers control the AXI/AHB interfaces properties, external FIFO
support and event count support. All of which are unimplemented at
present,we are only supporting core reset and read of ID register.
Signed-off-by: Vikram Garhwal <fnu.vikram@xilinx.com>
Signed-off-by: Sai Pavan Boddu <sai.pavan.boddu@xilinx.com>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Message-id: 1607023357-5096-3-git-send-email-sai.pavan.boddu@xilinx.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
---
include/hw/usb/hcd-dwc3.h | 55 +++
hw/usb/hcd-dwc3.c | 689 ++++++++++++++++++++++++++++++++++++++
hw/usb/Kconfig | 5 +
hw/usb/meson.build | 1 +
4 files changed, 750 insertions(+)
create mode 100644 include/hw/usb/hcd-dwc3.h
create mode 100644 hw/usb/hcd-dwc3.c
diff --git a/include/hw/usb/hcd-dwc3.h b/include/hw/usb/hcd-dwc3.h
new file mode 100644
index 00000000000..7c804d536d5
--- /dev/null
+++ b/include/hw/usb/hcd-dwc3.h
@@ -0,0 +1,55 @@
+/*
+ * QEMU model of the USB DWC3 host controller emulation.
+ *
+ * Copyright (c) 2020 Xilinx Inc.
+ *
+ * Written by Vikram Garhwal<fnu.vikram@xilinx.com>
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a copy
+ * of this software and associated documentation files (the "Software"), to deal
+ * in the Software without restriction, including without limitation the rights
+ * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
+ * copies of the Software, and to permit persons to whom the Software is
+ * furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice shall be included in
+ * all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
+ * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+ * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
+ * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
+ * THE SOFTWARE.
+ */
+#ifndef HCD_DWC3_H
+#define HCD_DWC3_H
+
+#include "hw/usb/hcd-xhci.h"
+#include "hw/usb/hcd-xhci-sysbus.h"
+
+#define TYPE_USB_DWC3 "usb_dwc3"
+
+#define USB_DWC3(obj) \
+ OBJECT_CHECK(USBDWC3, (obj), TYPE_USB_DWC3)
+
+#define USB_DWC3_R_MAX ((0x530 / 4) + 1)
+#define DWC3_SIZE 0x10000
+
+typedef struct USBDWC3 {
+ SysBusDevice parent_obj;
+ MemoryRegion iomem;
+ XHCISysbusState sysbus_xhci;
+
+ uint32_t regs[USB_DWC3_R_MAX];
+ RegisterInfo regs_info[USB_DWC3_R_MAX];
+
+ struct {
+ uint8_t mode;
+ uint32_t dwc_usb3_user;
+ } cfg;
+
+} USBDWC3;
+
+#endif
diff --git a/hw/usb/hcd-dwc3.c b/hw/usb/hcd-dwc3.c
new file mode 100644
index 00000000000..d547d0538dd
--- /dev/null
+++ b/hw/usb/hcd-dwc3.c
@@ -0,0 +1,689 @@
+/*
+ * QEMU model of the USB DWC3 host controller emulation.
+ *
+ * This model defines global register space of DWC3 controller. Global
+ * registers control the AXI/AHB interfaces properties, external FIFO support
+ * and event count support. All of which are unimplemented at present. We are
+ * only supporting core reset and read of ID register.
+ *
+ * Copyright (c) 2020 Xilinx Inc. Vikram Garhwal<fnu.vikram@xilinx.com>
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a copy
+ * of this software and associated documentation files (the "Software"), to deal
+ * in the Software without restriction, including without limitation the rights
+ * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
+ * copies of the Software, and to permit persons to whom the Software is
+ * furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice shall be included in
+ * all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
+ * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+ * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
+ * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
+ * THE SOFTWARE.
+ */
+
+#include "qemu/osdep.h"
+#include "hw/sysbus.h"
+#include "hw/register.h"
+#include "qemu/bitops.h"
+#include "qemu/log.h"
+#include "qom/object.h"
+#include "migration/vmstate.h"
+#include "hw/qdev-properties.h"
+#include "hw/usb/hcd-dwc3.h"
+#include "qapi/error.h"
+
+#ifndef USB_DWC3_ERR_DEBUG
+#define USB_DWC3_ERR_DEBUG 0
+#endif
+
+#define HOST_MODE 1
+#define FIFO_LEN 0x1000
+
+REG32(GSBUSCFG0, 0x00)
+ FIELD(GSBUSCFG0, DATRDREQINFO, 28, 4)
+ FIELD(GSBUSCFG0, DESRDREQINFO, 24, 4)
+ FIELD(GSBUSCFG0, DATWRREQINFO, 20, 4)
+ FIELD(GSBUSCFG0, DESWRREQINFO, 16, 4)
+ FIELD(GSBUSCFG0, RESERVED_15_12, 12, 4)
+ FIELD(GSBUSCFG0, DATBIGEND, 11, 1)
+ FIELD(GSBUSCFG0, DESBIGEND, 10, 1)
+ FIELD(GSBUSCFG0, RESERVED_9_8, 8, 2)
+ FIELD(GSBUSCFG0, INCR256BRSTENA, 7, 1)
+ FIELD(GSBUSCFG0, INCR128BRSTENA, 6, 1)
+ FIELD(GSBUSCFG0, INCR64BRSTENA, 5, 1)
+ FIELD(GSBUSCFG0, INCR32BRSTENA, 4, 1)
+ FIELD(GSBUSCFG0, INCR16BRSTENA, 3, 1)
+ FIELD(GSBUSCFG0, INCR8BRSTENA, 2, 1)
+ FIELD(GSBUSCFG0, INCR4BRSTENA, 1, 1)
+ FIELD(GSBUSCFG0, INCRBRSTENA, 0, 1)
+REG32(GSBUSCFG1, 0x04)
+ FIELD(GSBUSCFG1, RESERVED_31_13, 13, 19)
+ FIELD(GSBUSCFG1, EN1KPAGE, 12, 1)
+ FIELD(GSBUSCFG1, PIPETRANSLIMIT, 8, 4)
+ FIELD(GSBUSCFG1, RESERVED_7_0, 0, 8)
+REG32(GTXTHRCFG, 0x08)
+ FIELD(GTXTHRCFG, RESERVED_31, 31, 1)
+ FIELD(GTXTHRCFG, RESERVED_30, 30, 1)
+ FIELD(GTXTHRCFG, USBTXPKTCNTSEL, 29, 1)
+ FIELD(GTXTHRCFG, RESERVED_28, 28, 1)
+ FIELD(GTXTHRCFG, USBTXPKTCNT, 24, 4)
+ FIELD(GTXTHRCFG, USBMAXTXBURSTSIZE, 16, 8)
+ FIELD(GTXTHRCFG, RESERVED_15, 15, 1)
+ FIELD(GTXTHRCFG, RESERVED_14, 14, 1)
+ FIELD(GTXTHRCFG, RESERVED_13_11, 11, 3)
+ FIELD(GTXTHRCFG, RESERVED_10_0, 0, 11)
+REG32(GRXTHRCFG, 0x0c)
+ FIELD(GRXTHRCFG, RESERVED_31_30, 30, 2)
+ FIELD(GRXTHRCFG, USBRXPKTCNTSEL, 29, 1)
+ FIELD(GRXTHRCFG, RESERVED_28, 28, 1)
+ FIELD(GRXTHRCFG, USBRXPKTCNT, 24, 4)
+ FIELD(GRXTHRCFG, USBMAXRXBURSTSIZE, 19, 5)
+ FIELD(GRXTHRCFG, RESERVED_18_16, 16, 3)
+ FIELD(GRXTHRCFG, RESERVED_15, 15, 1)
+ FIELD(GRXTHRCFG, RESERVED_14_13, 13, 2)
+ FIELD(GRXTHRCFG, RESVISOCOUTSPC, 0, 13)
+REG32(GCTL, 0x10)
+ FIELD(GCTL, PWRDNSCALE, 19, 13)
+ FIELD(GCTL, MASTERFILTBYPASS, 18, 1)
+ FIELD(GCTL, BYPSSETADDR, 17, 1)
+ FIELD(GCTL, U2RSTECN, 16, 1)
+ FIELD(GCTL, FRMSCLDWN, 14, 2)
+ FIELD(GCTL, PRTCAPDIR, 12, 2)
+ FIELD(GCTL, CORESOFTRESET, 11, 1)
+ FIELD(GCTL, U1U2TIMERSCALE, 9, 1)
+ FIELD(GCTL, DEBUGATTACH, 8, 1)
+ FIELD(GCTL, RAMCLKSEL, 6, 2)
+ FIELD(GCTL, SCALEDOWN, 4, 2)
+ FIELD(GCTL, DISSCRAMBLE, 3, 1)
+ FIELD(GCTL, U2EXIT_LFPS, 2, 1)
+ FIELD(GCTL, GBLHIBERNATIONEN, 1, 1)
+ FIELD(GCTL, DSBLCLKGTNG, 0, 1)
+REG32(GPMSTS, 0x14)
+REG32(GSTS, 0x18)
+ FIELD(GSTS, CBELT, 20, 12)
+ FIELD(GSTS, RESERVED_19_12, 12, 8)
+ FIELD(GSTS, SSIC_IP, 11, 1)
+ FIELD(GSTS, OTG_IP, 10, 1)
+ FIELD(GSTS, BC_IP, 9, 1)
+ FIELD(GSTS, ADP_IP, 8, 1)
+ FIELD(GSTS, HOST_IP, 7, 1)
+ FIELD(GSTS, DEVICE_IP, 6, 1)
+ FIELD(GSTS, CSRTIMEOUT, 5, 1)
+ FIELD(GSTS, BUSERRADDRVLD, 4, 1)
+ FIELD(GSTS, RESERVED_3_2, 2, 2)
+ FIELD(GSTS, CURMOD, 0, 2)
+REG32(GUCTL1, 0x1c)
+ FIELD(GUCTL1, RESUME_OPMODE_HS_HOST, 10, 1)
+REG32(GSNPSID, 0x20)
+REG32(GGPIO, 0x24)
+ FIELD(GGPIO, GPO, 16, 16)
+ FIELD(GGPIO, GPI, 0, 16)
+REG32(GUID, 0x28)
+REG32(GUCTL, 0x2c)
+ FIELD(GUCTL, REFCLKPER, 22, 10)
+ FIELD(GUCTL, NOEXTRDL, 21, 1)
+ FIELD(GUCTL, RESERVED_20_18, 18, 3)
+ FIELD(GUCTL, SPRSCTRLTRANSEN, 17, 1)
+ FIELD(GUCTL, RESBWHSEPS, 16, 1)
+ FIELD(GUCTL, RESERVED_15, 15, 1)
+ FIELD(GUCTL, USBHSTINAUTORETRYEN, 14, 1)
+ FIELD(GUCTL, ENOVERLAPCHK, 13, 1)
+ FIELD(GUCTL, EXTCAPSUPPTEN, 12, 1)
+ FIELD(GUCTL, INSRTEXTRFSBODI, 11, 1)
+ FIELD(GUCTL, DTCT, 9, 2)
+ FIELD(GUCTL, DTFT, 0, 9)
+REG32(GBUSERRADDRLO, 0x30)
+REG32(GBUSERRADDRHI, 0x34)
+REG32(GHWPARAMS0, 0x40)
+ FIELD(GHWPARAMS0, GHWPARAMS0_31_24, 24, 8)
+ FIELD(GHWPARAMS0, GHWPARAMS0_23_16, 16, 8)
+ FIELD(GHWPARAMS0, GHWPARAMS0_15_8, 8, 8)
+ FIELD(GHWPARAMS0, GHWPARAMS0_7_6, 6, 2)
+ FIELD(GHWPARAMS0, GHWPARAMS0_5_3, 3, 3)
+ FIELD(GHWPARAMS0, GHWPARAMS0_2_0, 0, 3)
+REG32(GHWPARAMS1, 0x44)
+ FIELD(GHWPARAMS1, GHWPARAMS1_31, 31, 1)
+ FIELD(GHWPARAMS1, GHWPARAMS1_30, 30, 1)
+ FIELD(GHWPARAMS1, GHWPARAMS1_29, 29, 1)
+ FIELD(GHWPARAMS1, GHWPARAMS1_28, 28, 1)
+ FIELD(GHWPARAMS1, GHWPARAMS1_27, 27, 1)
+ FIELD(GHWPARAMS1, GHWPARAMS1_26, 26, 1)
+ FIELD(GHWPARAMS1, GHWPARAMS1_25_24, 24, 2)
+ FIELD(GHWPARAMS1, GHWPARAMS1_23, 23, 1)
+ FIELD(GHWPARAMS1, GHWPARAMS1_22_21, 21, 2)
+ FIELD(GHWPARAMS1, GHWPARAMS1_20_15, 15, 6)
+ FIELD(GHWPARAMS1, GHWPARAMS1_14_12, 12, 3)
+ FIELD(GHWPARAMS1, GHWPARAMS1_11_9, 9, 3)
+ FIELD(GHWPARAMS1, GHWPARAMS1_8_6, 6, 3)
+ FIELD(GHWPARAMS1, GHWPARAMS1_5_3, 3, 3)
+ FIELD(GHWPARAMS1, GHWPARAMS1_2_0, 0, 3)
+REG32(GHWPARAMS2, 0x48)
+REG32(GHWPARAMS3, 0x4c)
+ FIELD(GHWPARAMS3, GHWPARAMS3_31, 31, 1)
+ FIELD(GHWPARAMS3, GHWPARAMS3_30_23, 23, 8)
+ FIELD(GHWPARAMS3, GHWPARAMS3_22_18, 18, 5)
+ FIELD(GHWPARAMS3, GHWPARAMS3_17_12, 12, 6)
+ FIELD(GHWPARAMS3, GHWPARAMS3_11, 11, 1)
+ FIELD(GHWPARAMS3, GHWPARAMS3_10, 10, 1)
+ FIELD(GHWPARAMS3, GHWPARAMS3_9_8, 8, 2)
+ FIELD(GHWPARAMS3, GHWPARAMS3_7_6, 6, 2)
+ FIELD(GHWPARAMS3, GHWPARAMS3_5_4, 4, 2)
+ FIELD(GHWPARAMS3, GHWPARAMS3_3_2, 2, 2)
+ FIELD(GHWPARAMS3, GHWPARAMS3_1_0, 0, 2)
+REG32(GHWPARAMS4, 0x50)
+ FIELD(GHWPARAMS4, GHWPARAMS4_31_28, 28, 4)
+ FIELD(GHWPARAMS4, GHWPARAMS4_27_24, 24, 4)
+ FIELD(GHWPARAMS4, GHWPARAMS4_23, 23, 1)
+ FIELD(GHWPARAMS4, GHWPARAMS4_22, 22, 1)
+ FIELD(GHWPARAMS4, GHWPARAMS4_21, 21, 1)
+ FIELD(GHWPARAMS4, GHWPARAMS4_20_17, 17, 4)
+ FIELD(GHWPARAMS4, GHWPARAMS4_16_13, 13, 4)
+ FIELD(GHWPARAMS4, GHWPARAMS4_12, 12, 1)
+ FIELD(GHWPARAMS4, GHWPARAMS4_11, 11, 1)
+ FIELD(GHWPARAMS4, GHWPARAMS4_10_9, 9, 2)
+ FIELD(GHWPARAMS4, GHWPARAMS4_8_7, 7, 2)
+ FIELD(GHWPARAMS4, GHWPARAMS4_6, 6, 1)
+ FIELD(GHWPARAMS4, GHWPARAMS4_5_0, 0, 6)
+REG32(GHWPARAMS5, 0x54)
+ FIELD(GHWPARAMS5, GHWPARAMS5_31_28, 28, 4)
+ FIELD(GHWPARAMS5, GHWPARAMS5_27_22, 22, 6)
+ FIELD(GHWPARAMS5, GHWPARAMS5_21_16, 16, 6)
+ FIELD(GHWPARAMS5, GHWPARAMS5_15_10, 10, 6)
+ FIELD(GHWPARAMS5, GHWPARAMS5_9_4, 4, 6)
+ FIELD(GHWPARAMS5, GHWPARAMS5_3_0, 0, 4)
+REG32(GHWPARAMS6, 0x58)
+ FIELD(GHWPARAMS6, GHWPARAMS6_31_16, 16, 16)
+ FIELD(GHWPARAMS6, BUSFLTRSSUPPORT, 15, 1)
+ FIELD(GHWPARAMS6, BCSUPPORT, 14, 1)
+ FIELD(GHWPARAMS6, OTG_SS_SUPPORT, 13, 1)
+ FIELD(GHWPARAMS6, ADPSUPPORT, 12, 1)
+ FIELD(GHWPARAMS6, HNPSUPPORT, 11, 1)
+ FIELD(GHWPARAMS6, SRPSUPPORT, 10, 1)
+ FIELD(GHWPARAMS6, GHWPARAMS6_9_8, 8, 2)
+ FIELD(GHWPARAMS6, GHWPARAMS6_7, 7, 1)
+ FIELD(GHWPARAMS6, GHWPARAMS6_6, 6, 1)
+ FIELD(GHWPARAMS6, GHWPARAMS6_5_0, 0, 6)
+REG32(GHWPARAMS7, 0x5c)
+ FIELD(GHWPARAMS7, GHWPARAMS7_31_16, 16, 16)
+ FIELD(GHWPARAMS7, GHWPARAMS7_15_0, 0, 16)
+REG32(GDBGFIFOSPACE, 0x60)
+ FIELD(GDBGFIFOSPACE, SPACE_AVAILABLE, 16, 16)
+ FIELD(GDBGFIFOSPACE, RESERVED_15_9, 9, 7)
+ FIELD(GDBGFIFOSPACE, FIFO_QUEUE_SELECT, 0, 9)
+REG32(GUCTL2, 0x9c)
+ FIELD(GUCTL2, RESERVED_31_26, 26, 6)
+ FIELD(GUCTL2, EN_HP_PM_TIMER, 19, 7)
+ FIELD(GUCTL2, NOLOWPWRDUR, 15, 4)
+ FIELD(GUCTL2, RST_ACTBITLATER, 14, 1)
+ FIELD(GUCTL2, RESERVED_13, 13, 1)
+ FIELD(GUCTL2, DISABLECFC, 11, 1)
+REG32(GUSB2PHYCFG, 0x100)
+ FIELD(GUSB2PHYCFG, U2_FREECLK_EXISTS, 30, 1)
+ FIELD(GUSB2PHYCFG, ULPI_LPM_WITH_OPMODE_CHK, 29, 1)
+ FIELD(GUSB2PHYCFG, RESERVED_25, 25, 1)
+ FIELD(GUSB2PHYCFG, LSTRD, 22, 3)
+ FIELD(GUSB2PHYCFG, LSIPD, 19, 3)
+ FIELD(GUSB2PHYCFG, ULPIEXTVBUSINDIACTOR, 18, 1)
+ FIELD(GUSB2PHYCFG, ULPIEXTVBUSDRV, 17, 1)
+ FIELD(GUSB2PHYCFG, RESERVED_16, 16, 1)
+ FIELD(GUSB2PHYCFG, ULPIAUTORES, 15, 1)
+ FIELD(GUSB2PHYCFG, RESERVED_14, 14, 1)
+ FIELD(GUSB2PHYCFG, USBTRDTIM, 10, 4)
+ FIELD(GUSB2PHYCFG, XCVRDLY, 9, 1)
+ FIELD(GUSB2PHYCFG, ENBLSLPM, 8, 1)
+ FIELD(GUSB2PHYCFG, PHYSEL, 7, 1)
+ FIELD(GUSB2PHYCFG, SUSPENDUSB20, 6, 1)
+ FIELD(GUSB2PHYCFG, FSINTF, 5, 1)
+ FIELD(GUSB2PHYCFG, ULPI_UTMI_SEL, 4, 1)
+ FIELD(GUSB2PHYCFG, PHYIF, 3, 1)
+ FIELD(GUSB2PHYCFG, TOUTCAL, 0, 3)
+REG32(GUSB2I2CCTL, 0x140)
+REG32(GUSB2PHYACC_ULPI, 0x180)
+ FIELD(GUSB2PHYACC_ULPI, RESERVED_31_27, 27, 5)
+ FIELD(GUSB2PHYACC_ULPI, DISUIPIDRVR, 26, 1)
+ FIELD(GUSB2PHYACC_ULPI, NEWREGREQ, 25, 1)
+ FIELD(GUSB2PHYACC_ULPI, VSTSDONE, 24, 1)
+ FIELD(GUSB2PHYACC_ULPI, VSTSBSY, 23, 1)
+ FIELD(GUSB2PHYACC_ULPI, REGWR, 22, 1)
+ FIELD(GUSB2PHYACC_ULPI, REGADDR, 16, 6)
+ FIELD(GUSB2PHYACC_ULPI, EXTREGADDR, 8, 8)
+ FIELD(GUSB2PHYACC_ULPI, REGDATA, 0, 8)
+REG32(GTXFIFOSIZ0, 0x200)
+ FIELD(GTXFIFOSIZ0, TXFSTADDR_N, 16, 16)
+ FIELD(GTXFIFOSIZ0, TXFDEP_N, 0, 16)
+REG32(GTXFIFOSIZ1, 0x204)
+ FIELD(GTXFIFOSIZ1, TXFSTADDR_N, 16, 16)
+ FIELD(GTXFIFOSIZ1, TXFDEP_N, 0, 16)
+REG32(GTXFIFOSIZ2, 0x208)
+ FIELD(GTXFIFOSIZ2, TXFSTADDR_N, 16, 16)
+ FIELD(GTXFIFOSIZ2, TXFDEP_N, 0, 16)
+REG32(GTXFIFOSIZ3, 0x20c)
+ FIELD(GTXFIFOSIZ3, TXFSTADDR_N, 16, 16)
+ FIELD(GTXFIFOSIZ3, TXFDEP_N, 0, 16)
+REG32(GTXFIFOSIZ4, 0x210)
+ FIELD(GTXFIFOSIZ4, TXFSTADDR_N, 16, 16)
+ FIELD(GTXFIFOSIZ4, TXFDEP_N, 0, 16)
+REG32(GTXFIFOSIZ5, 0x214)
+ FIELD(GTXFIFOSIZ5, TXFSTADDR_N, 16, 16)
+ FIELD(GTXFIFOSIZ5, TXFDEP_N, 0, 16)
+REG32(GRXFIFOSIZ0, 0x280)
+ FIELD(GRXFIFOSIZ0, RXFSTADDR_N, 16, 16)
+ FIELD(GRXFIFOSIZ0, RXFDEP_N, 0, 16)
+REG32(GRXFIFOSIZ1, 0x284)
+ FIELD(GRXFIFOSIZ1, RXFSTADDR_N, 16, 16)
+ FIELD(GRXFIFOSIZ1, RXFDEP_N, 0, 16)
+REG32(GRXFIFOSIZ2, 0x288)
+ FIELD(GRXFIFOSIZ2, RXFSTADDR_N, 16, 16)
+ FIELD(GRXFIFOSIZ2, RXFDEP_N, 0, 16)
+REG32(GEVNTADRLO_0, 0x300)
+REG32(GEVNTADRHI_0, 0x304)
+REG32(GEVNTSIZ_0, 0x308)
+ FIELD(GEVNTSIZ_0, EVNTINTRPTMASK, 31, 1)
+ FIELD(GEVNTSIZ_0, RESERVED_30_16, 16, 15)
+ FIELD(GEVNTSIZ_0, EVENTSIZ, 0, 16)
+REG32(GEVNTCOUNT_0, 0x30c)
+ FIELD(GEVNTCOUNT_0, EVNT_HANDLER_BUSY, 31, 1)
+ FIELD(GEVNTCOUNT_0, RESERVED_30_16, 16, 15)
+ FIELD(GEVNTCOUNT_0, EVNTCOUNT, 0, 16)
+REG32(GEVNTADRLO_1, 0x310)
+REG32(GEVNTADRHI_1, 0x314)
+REG32(GEVNTSIZ_1, 0x318)
+ FIELD(GEVNTSIZ_1, EVNTINTRPTMASK, 31, 1)
+ FIELD(GEVNTSIZ_1, RESERVED_30_16, 16, 15)
+ FIELD(GEVNTSIZ_1, EVENTSIZ, 0, 16)
+REG32(GEVNTCOUNT_1, 0x31c)
+ FIELD(GEVNTCOUNT_1, EVNT_HANDLER_BUSY, 31, 1)
+ FIELD(GEVNTCOUNT_1, RESERVED_30_16, 16, 15)
+ FIELD(GEVNTCOUNT_1, EVNTCOUNT, 0, 16)
+REG32(GEVNTADRLO_2, 0x320)
+REG32(GEVNTADRHI_2, 0x324)
+REG32(GEVNTSIZ_2, 0x328)
+ FIELD(GEVNTSIZ_2, EVNTINTRPTMASK, 31, 1)
+ FIELD(GEVNTSIZ_2, RESERVED_30_16, 16, 15)
+ FIELD(GEVNTSIZ_2, EVENTSIZ, 0, 16)
+REG32(GEVNTCOUNT_2, 0x32c)
+ FIELD(GEVNTCOUNT_2, EVNT_HANDLER_BUSY, 31, 1)
+ FIELD(GEVNTCOUNT_2, RESERVED_30_16, 16, 15)
+ FIELD(GEVNTCOUNT_2, EVNTCOUNT, 0, 16)
+REG32(GEVNTADRLO_3, 0x330)
+REG32(GEVNTADRHI_3, 0x334)
+REG32(GEVNTSIZ_3, 0x338)
+ FIELD(GEVNTSIZ_3, EVNTINTRPTMASK, 31, 1)
+ FIELD(GEVNTSIZ_3, RESERVED_30_16, 16, 15)
+ FIELD(GEVNTSIZ_3, EVENTSIZ, 0, 16)
+REG32(GEVNTCOUNT_3, 0x33c)
+ FIELD(GEVNTCOUNT_3, EVNT_HANDLER_BUSY, 31, 1)
+ FIELD(GEVNTCOUNT_3, RESERVED_30_16, 16, 15)
+ FIELD(GEVNTCOUNT_3, EVNTCOUNT, 0, 16)
+REG32(GHWPARAMS8, 0x500)
+REG32(GTXFIFOPRIDEV, 0x510)
+ FIELD(GTXFIFOPRIDEV, RESERVED_31_N, 6, 26)
+ FIELD(GTXFIFOPRIDEV, GTXFIFOPRIDEV, 0, 6)
+REG32(GTXFIFOPRIHST, 0x518)
+ FIELD(GTXFIFOPRIHST, RESERVED_31_16, 3, 29)
+ FIELD(GTXFIFOPRIHST, GTXFIFOPRIHST, 0, 3)
+REG32(GRXFIFOPRIHST, 0x51c)
+ FIELD(GRXFIFOPRIHST, RESERVED_31_16, 3, 29)
+ FIELD(GRXFIFOPRIHST, GRXFIFOPRIHST, 0, 3)
+REG32(GDMAHLRATIO, 0x524)
+ FIELD(GDMAHLRATIO, RESERVED_31_13, 13, 19)
+ FIELD(GDMAHLRATIO, HSTRXFIFO, 8, 5)
+ FIELD(GDMAHLRATIO, RESERVED_7_5, 5, 3)
+ FIELD(GDMAHLRATIO, HSTTXFIFO, 0, 5)
+REG32(GFLADJ, 0x530)
+ FIELD(GFLADJ, GFLADJ_REFCLK_240MHZDECR_PLS1, 31, 1)
+ FIELD(GFLADJ, GFLADJ_REFCLK_240MHZ_DECR, 24, 7)
+ FIELD(GFLADJ, GFLADJ_REFCLK_LPM_SEL, 23, 1)
+ FIELD(GFLADJ, RESERVED_22, 22, 1)
+ FIELD(GFLADJ, GFLADJ_REFCLK_FLADJ, 8, 14)
+ FIELD(GFLADJ, GFLADJ_30MHZ_SDBND_SEL, 7, 1)
+ FIELD(GFLADJ, GFLADJ_30MHZ, 0, 6)
+
+#define DWC3_GLOBAL_OFFSET 0xC100
+static void reset_csr(USBDWC3 * s)
+{
+ int i = 0;
+ /*
+ * We reset all CSR regs except GCTL, GUCTL, GSTS, GSNPSID, GGPIO, GUID,
+ * GUSB2PHYCFGn registers and GUSB3PIPECTLn registers. We will skip PHY
+ * register as we don't implement them.
+ */
+ for (i = 0; i < USB_DWC3_R_MAX; i++) {
+ switch (i) {
+ case R_GCTL:
+ break;
+ case R_GSTS:
+ break;
+ case R_GSNPSID:
+ break;
+ case R_GGPIO:
+ break;
+ case R_GUID:
+ break;
+ case R_GUCTL:
+ break;
+ case R_GHWPARAMS0...R_GHWPARAMS7:
+ break;
+ case R_GHWPARAMS8:
+ break;
+ default:
+ register_reset(&s->regs_info[i]);
+ break;
+ }
+ }
+
+ xhci_sysbus_reset(DEVICE(&s->sysbus_xhci));
+}
+
+static void usb_dwc3_gctl_postw(RegisterInfo *reg, uint64_t val64)
+{
+ USBDWC3 *s = USB_DWC3(reg->opaque);
+
+ if (ARRAY_FIELD_EX32(s->regs, GCTL, CORESOFTRESET)) {
+ reset_csr(s);
+ }
+}
+
+static void usb_dwc3_guid_postw(RegisterInfo *reg, uint64_t val64)
+{
+ USBDWC3 *s = USB_DWC3(reg->opaque);
+
+ s->regs[R_GUID] = s->cfg.dwc_usb3_user;
+}
+
+static const RegisterAccessInfo usb_dwc3_regs_info[] = {
+ { .name = "GSBUSCFG0", .addr = A_GSBUSCFG0,
+ .ro = 0xf300,
+ .unimp = 0xffffffff,
+ },{ .name = "GSBUSCFG1", .addr = A_GSBUSCFG1,
+ .reset = 0x300,
+ .ro = 0xffffe0ff,
+ .unimp = 0xffffffff,
+ },{ .name = "GTXTHRCFG", .addr = A_GTXTHRCFG,
+ .ro = 0xd000ffff,
+ .unimp = 0xffffffff,
+ },{ .name = "GRXTHRCFG", .addr = A_GRXTHRCFG,
+ .ro = 0xd007e000,
+ .unimp = 0xffffffff,
+ },{ .name = "GCTL", .addr = A_GCTL,
+ .reset = 0x30c13004, .post_write = usb_dwc3_gctl_postw,
+ },{ .name = "GPMSTS", .addr = A_GPMSTS,
+ .ro = 0xfffffff,
+ .unimp = 0xffffffff,
+ },{ .name = "GSTS", .addr = A_GSTS,
+ .reset = 0x7e800000,
+ .ro = 0xffffffcf,
+ .w1c = 0x30,
+ .unimp = 0xffffffff,
+ },{ .name = "GUCTL1", .addr = A_GUCTL1,
+ .reset = 0x198a,
+ .ro = 0x7800,
+ .unimp = 0xffffffff,
+ },{ .name = "GSNPSID", .addr = A_GSNPSID,
+ .reset = 0x5533330a,
+ .ro = 0xffffffff,
+ },{ .name = "GGPIO", .addr = A_GGPIO,
+ .ro = 0xffff,
+ .unimp = 0xffffffff,
+ },{ .name = "GUID", .addr = A_GUID,
+ .reset = 0x12345678, .post_write = usb_dwc3_guid_postw,
+ },{ .name = "GUCTL", .addr = A_GUCTL,
+ .reset = 0x0c808010,
+ .ro = 0x1c8000,
+ .unimp = 0xffffffff,
+ },{ .name = "GBUSERRADDRLO", .addr = A_GBUSERRADDRLO,
+ .ro = 0xffffffff,
+ },{ .name = "GBUSERRADDRHI", .addr = A_GBUSERRADDRHI,
+ .ro = 0xffffffff,
+ },{ .name = "GHWPARAMS0", .addr = A_GHWPARAMS0,
+ .ro = 0xffffffff,
+ },{ .name = "GHWPARAMS1", .addr = A_GHWPARAMS1,
+ .ro = 0xffffffff,
+ },{ .name = "GHWPARAMS2", .addr = A_GHWPARAMS2,
+ .ro = 0xffffffff,
+ },{ .name = "GHWPARAMS3", .addr = A_GHWPARAMS3,
+ .ro = 0xffffffff,
+ },{ .name = "GHWPARAMS4", .addr = A_GHWPARAMS4,
+ .ro = 0xffffffff,
+ },{ .name = "GHWPARAMS5", .addr = A_GHWPARAMS5,
+ .ro = 0xffffffff,
+ },{ .name = "GHWPARAMS6", .addr = A_GHWPARAMS6,
+ .ro = 0xffffffff,
+ },{ .name = "GHWPARAMS7", .addr = A_GHWPARAMS7,
+ .ro = 0xffffffff,
+ },{ .name = "GDBGFIFOSPACE", .addr = A_GDBGFIFOSPACE,
+ .reset = 0xa0000,
+ .ro = 0xfffffe00,
+ .unimp = 0xffffffff,
+ },{ .name = "GUCTL2", .addr = A_GUCTL2,
+ .reset = 0x40d,
+ .ro = 0x2000,
+ .unimp = 0xffffffff,
+ },{ .name = "GUSB2PHYCFG", .addr = A_GUSB2PHYCFG,
+ .reset = 0x40102410,
+ .ro = 0x1e014030,
+ .unimp = 0xffffffff,
+ },{ .name = "GUSB2I2CCTL", .addr = A_GUSB2I2CCTL,
+ .ro = 0xffffffff,
+ .unimp = 0xffffffff,
+ },{ .name = "GUSB2PHYACC_ULPI", .addr = A_GUSB2PHYACC_ULPI,
+ .ro = 0xfd000000,
+ .unimp = 0xffffffff,
+ },{ .name = "GTXFIFOSIZ0", .addr = A_GTXFIFOSIZ0,
+ .reset = 0x2c7000a,
+ .unimp = 0xffffffff,
+ },{ .name = "GTXFIFOSIZ1", .addr = A_GTXFIFOSIZ1,
+ .reset = 0x2d10103,
+ .unimp = 0xffffffff,
+ },{ .name = "GTXFIFOSIZ2", .addr = A_GTXFIFOSIZ2,
+ .reset = 0x3d40103,
+ .unimp = 0xffffffff,
+ },{ .name = "GTXFIFOSIZ3", .addr = A_GTXFIFOSIZ3,
+ .reset = 0x4d70083,
+ .unimp = 0xffffffff,
+ },{ .name = "GTXFIFOSIZ4", .addr = A_GTXFIFOSIZ4,
+ .reset = 0x55a0083,
+ .unimp = 0xffffffff,
+ },{ .name = "GTXFIFOSIZ5", .addr = A_GTXFIFOSIZ5,
+ .reset = 0x5dd0083,
+ .unimp = 0xffffffff,
+ },{ .name = "GRXFIFOSIZ0", .addr = A_GRXFIFOSIZ0,
+ .reset = 0x1c20105,
+ .unimp = 0xffffffff,
+ },{ .name = "GRXFIFOSIZ1", .addr = A_GRXFIFOSIZ1,
+ .reset = 0x2c70000,
+ .unimp = 0xffffffff,
+ },{ .name = "GRXFIFOSIZ2", .addr = A_GRXFIFOSIZ2,
+ .reset = 0x2c70000,
+ .unimp = 0xffffffff,
+ },{ .name = "GEVNTADRLO_0", .addr = A_GEVNTADRLO_0,
+ .unimp = 0xffffffff,
+ },{ .name = "GEVNTADRHI_0", .addr = A_GEVNTADRHI_0,
+ .unimp = 0xffffffff,
+ },{ .name = "GEVNTSIZ_0", .addr = A_GEVNTSIZ_0,
+ .ro = 0x7fff0000,
+ .unimp = 0xffffffff,
+ },{ .name = "GEVNTCOUNT_0", .addr = A_GEVNTCOUNT_0,
+ .ro = 0x7fff0000,
+ .unimp = 0xffffffff,
+ },{ .name = "GEVNTADRLO_1", .addr = A_GEVNTADRLO_1,
+ .unimp = 0xffffffff,
+ },{ .name = "GEVNTADRHI_1", .addr = A_GEVNTADRHI_1,
+ .unimp = 0xffffffff,
+ },{ .name = "GEVNTSIZ_1", .addr = A_GEVNTSIZ_1,
+ .ro = 0x7fff0000,
+ .unimp = 0xffffffff,
+ },{ .name = "GEVNTCOUNT_1", .addr = A_GEVNTCOUNT_1,
+ .ro = 0x7fff0000,
+ .unimp = 0xffffffff,
+ },{ .name = "GEVNTADRLO_2", .addr = A_GEVNTADRLO_2,
+ .unimp = 0xffffffff,
+ },{ .name = "GEVNTADRHI_2", .addr = A_GEVNTADRHI_2,
+ .unimp = 0xffffffff,
+ },{ .name = "GEVNTSIZ_2", .addr = A_GEVNTSIZ_2,
+ .ro = 0x7fff0000,
+ .unimp = 0xffffffff,
+ },{ .name = "GEVNTCOUNT_2", .addr = A_GEVNTCOUNT_2,
+ .ro = 0x7fff0000,
+ .unimp = 0xffffffff,
+ },{ .name = "GEVNTADRLO_3", .addr = A_GEVNTADRLO_3,
+ .unimp = 0xffffffff,
+ },{ .name = "GEVNTADRHI_3", .addr = A_GEVNTADRHI_3,
+ .unimp = 0xffffffff,
+ },{ .name = "GEVNTSIZ_3", .addr = A_GEVNTSIZ_3,
+ .ro = 0x7fff0000,
+ .unimp = 0xffffffff,
+ },{ .name = "GEVNTCOUNT_3", .addr = A_GEVNTCOUNT_3,
+ .ro = 0x7fff0000,
+ .unimp = 0xffffffff,
+ },{ .name = "GHWPARAMS8", .addr = A_GHWPARAMS8,
+ .ro = 0xffffffff,
+ },{ .name = "GTXFIFOPRIDEV", .addr = A_GTXFIFOPRIDEV,
+ .ro = 0xffffffc0,
+ .unimp = 0xffffffff,
+ },{ .name = "GTXFIFOPRIHST", .addr = A_GTXFIFOPRIHST,
+ .ro = 0xfffffff8,
+ .unimp = 0xffffffff,
+ },{ .name = "GRXFIFOPRIHST", .addr = A_GRXFIFOPRIHST,
+ .ro = 0xfffffff8,
+ .unimp = 0xffffffff,
+ },{ .name = "GDMAHLRATIO", .addr = A_GDMAHLRATIO,
+ .ro = 0xffffe0e0,
+ .unimp = 0xffffffff,
+ },{ .name = "GFLADJ", .addr = A_GFLADJ,
+ .reset = 0xc83f020,
+ .rsvd = 0x40,
+ .ro = 0x400040,
+ .unimp = 0xffffffff,
+ }
+};
+
+static void usb_dwc3_reset(DeviceState *dev)
+{
+ USBDWC3 *s = USB_DWC3(dev);
+ unsigned int i;
+
+ for (i = 0; i < ARRAY_SIZE(s->regs_info); ++i) {
+ switch (i) {
+ case R_GHWPARAMS0...R_GHWPARAMS7:
+ break;
+ case R_GHWPARAMS8:
+ break;
+ default:
+ register_reset(&s->regs_info[i]);
+ };
+ }
+
+ xhci_sysbus_reset(DEVICE(&s->sysbus_xhci));
+}
+
+static const MemoryRegionOps usb_dwc3_ops = {
+ .read = register_read_memory,
+ .write = register_write_memory,
+ .endianness = DEVICE_LITTLE_ENDIAN,
+ .valid = {
+ .min_access_size = 4,
+ .max_access_size = 4,
+ },
+};
+
+static void usb_dwc3_realize(DeviceState *dev, Error **errp)
+{
+ USBDWC3 *s = USB_DWC3(dev);
+ SysBusDevice *sbd = SYS_BUS_DEVICE(dev);
+ Error *err = NULL;
+
+ sysbus_realize(SYS_BUS_DEVICE(&s->sysbus_xhci), &err);
+ if (err) {
+ error_propagate(errp, err);
+ return;
+ }
+
+ memory_region_add_subregion(&s->iomem, 0,
+ sysbus_mmio_get_region(SYS_BUS_DEVICE(&s->sysbus_xhci), 0));
+ sysbus_init_mmio(sbd, &s->iomem);
+
+ /*
+ * Device Configuration
+ */
+ s->regs[R_GHWPARAMS0] = 0x40204048 | s->cfg.mode;
+ s->regs[R_GHWPARAMS1] = 0x222493b;
+ s->regs[R_GHWPARAMS2] = 0x12345678;
+ s->regs[R_GHWPARAMS3] = 0x618c088;
+ s->regs[R_GHWPARAMS4] = 0x47822004;
+ s->regs[R_GHWPARAMS5] = 0x4202088;
+ s->regs[R_GHWPARAMS6] = 0x7850c20;
+ s->regs[R_GHWPARAMS7] = 0x0;
+ s->regs[R_GHWPARAMS8] = 0x478;
+}
+
+static void usb_dwc3_init(Object *obj)
+{
+ USBDWC3 *s = USB_DWC3(obj);
+ RegisterInfoArray *reg_array;
+
+ memory_region_init(&s->iomem, obj, TYPE_USB_DWC3, DWC3_SIZE);
+ reg_array =
+ register_init_block32(DEVICE(obj), usb_dwc3_regs_info,
+ ARRAY_SIZE(usb_dwc3_regs_info),
+ s->regs_info, s->regs,
+ &usb_dwc3_ops,
+ USB_DWC3_ERR_DEBUG,
+ USB_DWC3_R_MAX * 4);
+ memory_region_add_subregion(&s->iomem,
+ DWC3_GLOBAL_OFFSET,
+ ®_array->mem);
+ object_initialize_child(obj, "dwc3-xhci", &s->sysbus_xhci,
+ TYPE_XHCI_SYSBUS);
+ qdev_alias_all_properties(DEVICE(&s->sysbus_xhci), obj);
+
+ s->cfg.mode = HOST_MODE;
+}
+
+static const VMStateDescription vmstate_usb_dwc3 = {
+ .name = "usb-dwc3",
+ .version_id = 1,
+ .fields = (VMStateField[]) {
+ VMSTATE_UINT32_ARRAY(regs, USBDWC3, USB_DWC3_R_MAX),
+ VMSTATE_UINT8(cfg.mode, USBDWC3),
+ VMSTATE_UINT32(cfg.dwc_usb3_user, USBDWC3),
+ VMSTATE_END_OF_LIST()
+ }
+};
+
+static Property usb_dwc3_properties[] = {
+ DEFINE_PROP_UINT32("DWC_USB3_USERID", USBDWC3, cfg.dwc_usb3_user,
+ 0x12345678),
+ DEFINE_PROP_END_OF_LIST(),
+};
+
+static void usb_dwc3_class_init(ObjectClass *klass, void *data)
+{
+ DeviceClass *dc = DEVICE_CLASS(klass);
+
+ dc->reset = usb_dwc3_reset;
+ dc->realize = usb_dwc3_realize;
+ dc->vmsd = &vmstate_usb_dwc3;
+ device_class_set_props(dc, usb_dwc3_properties);
+}
+
+static const TypeInfo usb_dwc3_info = {
+ .name = TYPE_USB_DWC3,
+ .parent = TYPE_SYS_BUS_DEVICE,
+ .instance_size = sizeof(USBDWC3),
+ .class_init = usb_dwc3_class_init,
+ .instance_init = usb_dwc3_init,
+};
+
+static void usb_dwc3_register_types(void)
+{
+ type_register_static(&usb_dwc3_info);
+}
+
+type_init(usb_dwc3_register_types)
diff --git a/hw/usb/Kconfig b/hw/usb/Kconfig
index 7fbae18bc80..56da78a4faf 100644
--- a/hw/usb/Kconfig
+++ b/hw/usb/Kconfig
@@ -112,3 +112,8 @@ config IMX_USBPHY
bool
default y
depends on USB
+
+config USB_DWC3
+ bool
+ select USB_XHCI_SYSBUS
+ select REGISTER
diff --git a/hw/usb/meson.build b/hw/usb/meson.build
index ecfec0a8f46..433c27e833e 100644
--- a/hw/usb/meson.build
+++ b/hw/usb/meson.build
@@ -26,6 +26,7 @@ softmmu_ss.add(when: 'CONFIG_USB_XHCI_SYSBUS', if_true: files('hcd-xhci-sysbus.c
softmmu_ss.add(when: 'CONFIG_USB_XHCI_NEC', if_true: files('hcd-xhci-nec.c'))
softmmu_ss.add(when: 'CONFIG_USB_MUSB', if_true: files('hcd-musb.c'))
softmmu_ss.add(when: 'CONFIG_USB_DWC2', if_true: files('hcd-dwc2.c'))
+softmmu_ss.add(when: 'CONFIG_USB_DWC3', if_true: files('hcd-dwc3.c'))
softmmu_ss.add(when: 'CONFIG_TUSB6010', if_true: files('tusb6010.c'))
softmmu_ss.add(when: 'CONFIG_IMX', if_true: files('chipidea.c'))
--
2.20.1
^ permalink raw reply related [flat|nested] 31+ messages in thread
* [PULL 14/20] usb: xlnx-usb-subsystem: Add xilinx usb subsystem
2020-12-15 14:12 [PULL 00/20] target-arm queue Peter Maydell
` (12 preceding siblings ...)
2020-12-15 14:12 ` [PULL 13/20] usb: Add DWC3 model Peter Maydell
@ 2020-12-15 14:12 ` Peter Maydell
2020-12-15 14:12 ` [PULL 15/20] arm: xlnx-versal: Connect usb to virt-versal Peter Maydell
` (6 subsequent siblings)
20 siblings, 0 replies; 31+ messages in thread
From: Peter Maydell @ 2020-12-15 14:12 UTC (permalink / raw)
To: qemu-devel
From: Sai Pavan Boddu <sai.pavan.boddu@xilinx.com>
This model is a top level integration wrapper for hcd-dwc3 and
versal-usb2-ctrl-regs modules, this is used by xilinx versal soc's and
future xilinx usb subsystems would also be part of it.
Signed-off-by: Sai Pavan Boddu <sai.pavan.boddu@xilinx.com>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 1607023357-5096-4-git-send-email-sai.pavan.boddu@xilinx.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
---
include/hw/usb/xlnx-usb-subsystem.h | 45 ++++++++++++++
hw/usb/xlnx-usb-subsystem.c | 94 +++++++++++++++++++++++++++++
hw/usb/Kconfig | 5 ++
hw/usb/meson.build | 1 +
4 files changed, 145 insertions(+)
create mode 100644 include/hw/usb/xlnx-usb-subsystem.h
create mode 100644 hw/usb/xlnx-usb-subsystem.c
diff --git a/include/hw/usb/xlnx-usb-subsystem.h b/include/hw/usb/xlnx-usb-subsystem.h
new file mode 100644
index 00000000000..739bef7f451
--- /dev/null
+++ b/include/hw/usb/xlnx-usb-subsystem.h
@@ -0,0 +1,45 @@
+/*
+ * QEMU model of the Xilinx usb subsystem
+ *
+ * Copyright (c) 2020 Xilinx Inc. Sai Pavan Boddu <sai.pavan.boddu@xilinx.com>
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a copy
+ * of this software and associated documentation files (the "Software"), to deal
+ * in the Software without restriction, including without limitation the rights
+ * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
+ * copies of the Software, and to permit persons to whom the Software is
+ * furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice shall be included in
+ * all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
+ * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+ * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
+ * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
+ * THE SOFTWARE.
+ */
+
+#ifndef _XLNX_VERSAL_USB_SUBSYSTEM_H_
+#define _XLNX_VERSAL_USB_SUBSYSTEM_H_
+
+#include "hw/usb/xlnx-versal-usb2-ctrl-regs.h"
+#include "hw/usb/hcd-dwc3.h"
+
+#define TYPE_XILINX_VERSAL_USB2 "xlnx.versal-usb2"
+
+#define VERSAL_USB2(obj) \
+ OBJECT_CHECK(VersalUsb2, (obj), TYPE_XILINX_VERSAL_USB2)
+
+typedef struct VersalUsb2 {
+ SysBusDevice parent_obj;
+ MemoryRegion dwc3_mr;
+ MemoryRegion usb2Ctrl_mr;
+
+ VersalUsb2CtrlRegs usb2Ctrl;
+ USBDWC3 dwc3;
+} VersalUsb2;
+
+#endif
diff --git a/hw/usb/xlnx-usb-subsystem.c b/hw/usb/xlnx-usb-subsystem.c
new file mode 100644
index 00000000000..568257370cb
--- /dev/null
+++ b/hw/usb/xlnx-usb-subsystem.c
@@ -0,0 +1,94 @@
+/*
+ * QEMU model of the Xilinx usb subsystem
+ *
+ * Copyright (c) 2020 Xilinx Inc. Sai Pavan Boddu <sai.pava.boddu@xilinx.com>
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a copy
+ * of this software and associated documentation files (the "Software"), to deal
+ * in the Software without restriction, including without limitation the rights
+ * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
+ * copies of the Software, and to permit persons to whom the Software is
+ * furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice shall be included in
+ * all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
+ * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+ * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
+ * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
+ * THE SOFTWARE.
+ */
+
+#include "qemu/osdep.h"
+#include "hw/sysbus.h"
+#include "hw/irq.h"
+#include "hw/register.h"
+#include "qemu/bitops.h"
+#include "qemu/log.h"
+#include "qom/object.h"
+#include "qapi/error.h"
+#include "hw/qdev-properties.h"
+#include "hw/usb/xlnx-usb-subsystem.h"
+
+static void versal_usb2_realize(DeviceState *dev, Error **errp)
+{
+ VersalUsb2 *s = VERSAL_USB2(dev);
+ SysBusDevice *sbd = SYS_BUS_DEVICE(dev);
+ Error *err = NULL;
+
+ sysbus_realize(SYS_BUS_DEVICE(&s->dwc3), &err);
+ if (err) {
+ error_propagate(errp, err);
+ return;
+ }
+ sysbus_realize(SYS_BUS_DEVICE(&s->usb2Ctrl), &err);
+ if (err) {
+ error_propagate(errp, err);
+ return;
+ }
+ sysbus_init_mmio(sbd, &s->dwc3_mr);
+ sysbus_init_mmio(sbd, &s->usb2Ctrl_mr);
+ qdev_pass_gpios(DEVICE(&s->dwc3.sysbus_xhci), dev, SYSBUS_DEVICE_GPIO_IRQ);
+}
+
+static void versal_usb2_init(Object *obj)
+{
+ VersalUsb2 *s = VERSAL_USB2(obj);
+
+ object_initialize_child(obj, "versal.dwc3", &s->dwc3,
+ TYPE_USB_DWC3);
+ object_initialize_child(obj, "versal.usb2-ctrl", &s->usb2Ctrl,
+ TYPE_XILINX_VERSAL_USB2_CTRL_REGS);
+ memory_region_init_alias(&s->dwc3_mr, obj, "versal.dwc3_alias",
+ &s->dwc3.iomem, 0, DWC3_SIZE);
+ memory_region_init_alias(&s->usb2Ctrl_mr, obj, "versal.usb2Ctrl_alias",
+ &s->usb2Ctrl.iomem, 0, USB2_REGS_R_MAX * 4);
+ qdev_alias_all_properties(DEVICE(&s->dwc3), obj);
+ qdev_alias_all_properties(DEVICE(&s->dwc3.sysbus_xhci), obj);
+ object_property_add_alias(obj, "dma", OBJECT(&s->dwc3.sysbus_xhci), "dma");
+}
+
+static void versal_usb2_class_init(ObjectClass *klass, void *data)
+{
+ DeviceClass *dc = DEVICE_CLASS(klass);
+
+ dc->realize = versal_usb2_realize;
+}
+
+static const TypeInfo versal_usb2_info = {
+ .name = TYPE_XILINX_VERSAL_USB2,
+ .parent = TYPE_SYS_BUS_DEVICE,
+ .instance_size = sizeof(VersalUsb2),
+ .class_init = versal_usb2_class_init,
+ .instance_init = versal_usb2_init,
+};
+
+static void versal_usb_types(void)
+{
+ type_register_static(&versal_usb2_info);
+}
+
+type_init(versal_usb_types)
diff --git a/hw/usb/Kconfig b/hw/usb/Kconfig
index 56da78a4faf..40093d7ea6b 100644
--- a/hw/usb/Kconfig
+++ b/hw/usb/Kconfig
@@ -117,3 +117,8 @@ config USB_DWC3
bool
select USB_XHCI_SYSBUS
select REGISTER
+
+config XLNX_USB_SUBSYS
+ bool
+ default y if XLNX_VERSAL
+ select USB_DWC3
diff --git a/hw/usb/meson.build b/hw/usb/meson.build
index 433c27e833e..f46c6b66553 100644
--- a/hw/usb/meson.build
+++ b/hw/usb/meson.build
@@ -32,6 +32,7 @@ softmmu_ss.add(when: 'CONFIG_TUSB6010', if_true: files('tusb6010.c'))
softmmu_ss.add(when: 'CONFIG_IMX', if_true: files('chipidea.c'))
softmmu_ss.add(when: 'CONFIG_IMX_USBPHY', if_true: files('imx-usb-phy.c'))
specific_ss.add(when: 'CONFIG_XLNX_VERSAL', if_true: files('xlnx-versal-usb2-ctrl-regs.c'))
+specific_ss.add(when: 'CONFIG_XLNX_USB_SUBSYS', if_true: files('xlnx-usb-subsystem.c'))
# emulated usb devices
softmmu_ss.add(when: 'CONFIG_USB', if_true: files('dev-hub.c'))
--
2.20.1
^ permalink raw reply related [flat|nested] 31+ messages in thread
* [PULL 15/20] arm: xlnx-versal: Connect usb to virt-versal
2020-12-15 14:12 [PULL 00/20] target-arm queue Peter Maydell
` (13 preceding siblings ...)
2020-12-15 14:12 ` [PULL 14/20] usb: xlnx-usb-subsystem: Add xilinx usb subsystem Peter Maydell
@ 2020-12-15 14:12 ` Peter Maydell
2020-12-15 14:12 ` [PULL 16/20] hw/misc/zynq_slcr: Avoid #DIV/0! error Peter Maydell
` (5 subsequent siblings)
20 siblings, 0 replies; 31+ messages in thread
From: Peter Maydell @ 2020-12-15 14:12 UTC (permalink / raw)
To: qemu-devel
From: Vikram Garhwal <fnu.vikram@xilinx.com>
Connect VersalUsb2 subsystem to xlnx-versal SOC, its placed
in iou of lpd domain and configure it as dual port host controller.
Add the respective guest dts nodes for "xlnx-versal-virt" machine.
Signed-off-by: Vikram Garhwal <fnu.vikram@xilinx.com>
Signed-off-by: Sai Pavan Boddu <sai.pavan.boddu@xilinx.com>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Message-id: 1607023357-5096-5-git-send-email-sai.pavan.boddu@xilinx.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
---
include/hw/arm/xlnx-versal.h | 9 ++++++
hw/arm/xlnx-versal-virt.c | 55 ++++++++++++++++++++++++++++++++++++
hw/arm/xlnx-versal.c | 26 +++++++++++++++++
3 files changed, 90 insertions(+)
diff --git a/include/hw/arm/xlnx-versal.h b/include/hw/arm/xlnx-versal.h
index 8ce8e63b56c..2b76885afd6 100644
--- a/include/hw/arm/xlnx-versal.h
+++ b/include/hw/arm/xlnx-versal.h
@@ -21,6 +21,7 @@
#include "hw/net/cadence_gem.h"
#include "hw/rtc/xlnx-zynqmp-rtc.h"
#include "qom/object.h"
+#include "hw/usb/xlnx-usb-subsystem.h"
#define TYPE_XLNX_VERSAL "xlnx-versal"
OBJECT_DECLARE_SIMPLE_TYPE(Versal, XLNX_VERSAL)
@@ -59,6 +60,7 @@ struct Versal {
PL011State uart[XLNX_VERSAL_NR_UARTS];
CadenceGEMState gem[XLNX_VERSAL_NR_GEMS];
XlnxZDMA adma[XLNX_VERSAL_NR_ADMAS];
+ VersalUsb2 usb;
} iou;
} lpd;
@@ -88,6 +90,7 @@ struct Versal {
#define VERSAL_UART0_IRQ_0 18
#define VERSAL_UART1_IRQ_0 19
+#define VERSAL_USB0_IRQ_0 22
#define VERSAL_GEM0_IRQ_0 56
#define VERSAL_GEM0_WAKE_IRQ_0 57
#define VERSAL_GEM1_IRQ_0 58
@@ -125,6 +128,12 @@ struct Versal {
#define MM_OCM 0xfffc0000U
#define MM_OCM_SIZE 0x40000
+#define MM_USB2_CTRL_REGS 0xFF9D0000
+#define MM_USB2_CTRL_REGS_SIZE 0x10000
+
+#define MM_USB_0 0xFE200000
+#define MM_USB_0_SIZE 0x10000
+
#define MM_TOP_DDR 0x0
#define MM_TOP_DDR_SIZE 0x80000000U
#define MM_TOP_DDR_2 0x800000000ULL
diff --git a/hw/arm/xlnx-versal-virt.c b/hw/arm/xlnx-versal-virt.c
index ee1282241e3..8482cd61960 100644
--- a/hw/arm/xlnx-versal-virt.c
+++ b/hw/arm/xlnx-versal-virt.c
@@ -39,6 +39,8 @@ struct VersalVirt {
uint32_t ethernet_phy[2];
uint32_t clk_125Mhz;
uint32_t clk_25Mhz;
+ uint32_t usb;
+ uint32_t dwc;
} phandle;
struct arm_boot_info binfo;
@@ -66,6 +68,8 @@ static void fdt_create(VersalVirt *s)
s->phandle.clk_25Mhz = qemu_fdt_alloc_phandle(s->fdt);
s->phandle.clk_125Mhz = qemu_fdt_alloc_phandle(s->fdt);
+ s->phandle.usb = qemu_fdt_alloc_phandle(s->fdt);
+ s->phandle.dwc = qemu_fdt_alloc_phandle(s->fdt);
/* Create /chosen node for load_dtb. */
qemu_fdt_add_subnode(s->fdt, "/chosen");
@@ -148,6 +152,56 @@ static void fdt_add_timer_nodes(VersalVirt *s)
compat, sizeof(compat));
}
+static void fdt_add_usb_xhci_nodes(VersalVirt *s)
+{
+ const char clocknames[] = "bus_clk\0ref_clk";
+ const char irq_name[] = "dwc_usb3";
+ const char compatVersalDWC3[] = "xlnx,versal-dwc3";
+ const char compatDWC3[] = "snps,dwc3";
+ char *name = g_strdup_printf("/usb@%" PRIx32, MM_USB2_CTRL_REGS);
+
+ qemu_fdt_add_subnode(s->fdt, name);
+ qemu_fdt_setprop(s->fdt, name, "compatible",
+ compatVersalDWC3, sizeof(compatVersalDWC3));
+ qemu_fdt_setprop_sized_cells(s->fdt, name, "reg",
+ 2, MM_USB2_CTRL_REGS,
+ 2, MM_USB2_CTRL_REGS_SIZE);
+ qemu_fdt_setprop(s->fdt, name, "clock-names",
+ clocknames, sizeof(clocknames));
+ qemu_fdt_setprop_cells(s->fdt, name, "clocks",
+ s->phandle.clk_25Mhz, s->phandle.clk_125Mhz);
+ qemu_fdt_setprop(s->fdt, name, "ranges", NULL, 0);
+ qemu_fdt_setprop_cell(s->fdt, name, "#address-cells", 2);
+ qemu_fdt_setprop_cell(s->fdt, name, "#size-cells", 2);
+ qemu_fdt_setprop_cell(s->fdt, name, "phandle", s->phandle.usb);
+ g_free(name);
+
+ name = g_strdup_printf("/usb@%" PRIx32 "/dwc3@%" PRIx32,
+ MM_USB2_CTRL_REGS, MM_USB_0);
+ qemu_fdt_add_subnode(s->fdt, name);
+ qemu_fdt_setprop(s->fdt, name, "compatible",
+ compatDWC3, sizeof(compatDWC3));
+ qemu_fdt_setprop_sized_cells(s->fdt, name, "reg",
+ 2, MM_USB_0, 2, MM_USB_0_SIZE);
+ qemu_fdt_setprop(s->fdt, name, "interrupt-names",
+ irq_name, sizeof(irq_name));
+ qemu_fdt_setprop_cells(s->fdt, name, "interrupts",
+ GIC_FDT_IRQ_TYPE_SPI, VERSAL_USB0_IRQ_0,
+ GIC_FDT_IRQ_FLAGS_LEVEL_HI);
+ qemu_fdt_setprop_cell(s->fdt, name,
+ "snps,quirk-frame-length-adjustment", 0x20);
+ qemu_fdt_setprop_cells(s->fdt, name, "#stream-id-cells", 1);
+ qemu_fdt_setprop_string(s->fdt, name, "dr_mode", "host");
+ qemu_fdt_setprop_string(s->fdt, name, "phy-names", "usb3-phy");
+ qemu_fdt_setprop(s->fdt, name, "snps,dis_u2_susphy_quirk", NULL, 0);
+ qemu_fdt_setprop(s->fdt, name, "snps,dis_u3_susphy_quirk", NULL, 0);
+ qemu_fdt_setprop(s->fdt, name, "snps,refclk_fladj", NULL, 0);
+ qemu_fdt_setprop(s->fdt, name, "snps,mask_phy_reset", NULL, 0);
+ qemu_fdt_setprop_cell(s->fdt, name, "phandle", s->phandle.dwc);
+ qemu_fdt_setprop_string(s->fdt, name, "maximum-speed", "high-speed");
+ g_free(name);
+}
+
static void fdt_add_uart_nodes(VersalVirt *s)
{
uint64_t addrs[] = { MM_UART1, MM_UART0 };
@@ -515,6 +569,7 @@ static void versal_virt_init(MachineState *machine)
fdt_add_gic_nodes(s);
fdt_add_timer_nodes(s);
fdt_add_zdma_nodes(s);
+ fdt_add_usb_xhci_nodes(s);
fdt_add_sd_nodes(s);
fdt_add_rtc_node(s);
fdt_add_cpu_nodes(s, psci_conduit);
diff --git a/hw/arm/xlnx-versal.c b/hw/arm/xlnx-versal.c
index 12ba6c4ebae..b0777166e89 100644
--- a/hw/arm/xlnx-versal.c
+++ b/hw/arm/xlnx-versal.c
@@ -145,6 +145,31 @@ static void versal_create_uarts(Versal *s, qemu_irq *pic)
}
}
+static void versal_create_usbs(Versal *s, qemu_irq *pic)
+{
+ DeviceState *dev;
+ MemoryRegion *mr;
+
+ object_initialize_child(OBJECT(s), "usb2", &s->lpd.iou.usb,
+ TYPE_XILINX_VERSAL_USB2);
+ dev = DEVICE(&s->lpd.iou.usb);
+
+ object_property_set_link(OBJECT(dev), "dma", OBJECT(&s->mr_ps),
+ &error_abort);
+ qdev_prop_set_uint32(dev, "intrs", 1);
+ qdev_prop_set_uint32(dev, "slots", 2);
+
+ sysbus_realize(SYS_BUS_DEVICE(dev), &error_fatal);
+
+ mr = sysbus_mmio_get_region(SYS_BUS_DEVICE(dev), 0);
+ memory_region_add_subregion(&s->mr_ps, MM_USB_0, mr);
+
+ sysbus_connect_irq(SYS_BUS_DEVICE(dev), 0, pic[VERSAL_USB0_IRQ_0]);
+
+ mr = sysbus_mmio_get_region(SYS_BUS_DEVICE(dev), 1);
+ memory_region_add_subregion(&s->mr_ps, MM_USB2_CTRL_REGS, mr);
+}
+
static void versal_create_gems(Versal *s, qemu_irq *pic)
{
int i;
@@ -333,6 +358,7 @@ static void versal_realize(DeviceState *dev, Error **errp)
versal_create_apu_cpus(s);
versal_create_apu_gic(s, pic);
versal_create_uarts(s, pic);
+ versal_create_usbs(s, pic);
versal_create_gems(s, pic);
versal_create_admas(s, pic);
versal_create_sds(s, pic);
--
2.20.1
^ permalink raw reply related [flat|nested] 31+ messages in thread
* [PULL 16/20] hw/misc/zynq_slcr: Avoid #DIV/0! error
2020-12-15 14:12 [PULL 00/20] target-arm queue Peter Maydell
` (14 preceding siblings ...)
2020-12-15 14:12 ` [PULL 15/20] arm: xlnx-versal: Connect usb to virt-versal Peter Maydell
@ 2020-12-15 14:12 ` Peter Maydell
2020-12-15 14:12 ` [PULL 17/20] hw/block/m25p80: Make Numonyx config field names more accurate Peter Maydell
` (4 subsequent siblings)
20 siblings, 0 replies; 31+ messages in thread
From: Peter Maydell @ 2020-12-15 14:12 UTC (permalink / raw)
To: qemu-devel
From: Philippe Mathieu-Daudé <f4bug@amsat.org>
Malicious user can set the feedback divisor for the PLLs
to zero, triggering a floating-point exception (SIGFPE).
As the datasheet [*] is not clear how hardware behaves
when these bits are zeroes, use the maximum divisor
possible (128) to avoid the software FPE.
[*] Zynq-7000 TRM, UG585 (v1.12.2)
B.28 System Level Control Registers (slcr)
-> "Register (slcr) ARM_PLL_CTRL"
25.10.4 PLLs
-> "Software-Controlled PLL Update"
Fixes: 38867cb7ec9 ("hw/misc/zynq_slcr: add clock generation for uarts")
Reported-by: Gaoning Pan <pgn@zju.edu.cn>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Reviewed-by: Damien Hedde <damien.hedde@greensocs.com>
Message-id: 20201210141610.884600-1-f4bug@amsat.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
---
hw/misc/zynq_slcr.c | 5 +++++
1 file changed, 5 insertions(+)
diff --git a/hw/misc/zynq_slcr.c b/hw/misc/zynq_slcr.c
index a2b28019e3c..66504a9d3ab 100644
--- a/hw/misc/zynq_slcr.c
+++ b/hw/misc/zynq_slcr.c
@@ -217,6 +217,11 @@ static uint64_t zynq_slcr_compute_pll(uint64_t input, uint32_t ctrl_reg)
return 0;
}
+ /* Consider zero feedback as maximum divide ratio possible */
+ if (!mult) {
+ mult = 1 << R_xxx_PLL_CTRL_PLL_FPDIV_LENGTH;
+ }
+
/* frequency multiplier -> period division */
return input / mult;
}
--
2.20.1
^ permalink raw reply related [flat|nested] 31+ messages in thread
* [PULL 17/20] hw/block/m25p80: Make Numonyx config field names more accurate
2020-12-15 14:12 [PULL 00/20] target-arm queue Peter Maydell
` (15 preceding siblings ...)
2020-12-15 14:12 ` [PULL 16/20] hw/misc/zynq_slcr: Avoid #DIV/0! error Peter Maydell
@ 2020-12-15 14:12 ` Peter Maydell
2020-12-15 14:12 ` [PULL 18/20] hw/block/m25p80: Fix when VCFG XIP bit is set for Numonyx Peter Maydell
` (3 subsequent siblings)
20 siblings, 0 replies; 31+ messages in thread
From: Peter Maydell @ 2020-12-15 14:12 UTC (permalink / raw)
To: qemu-devel
From: Joe Komlodi <joe.komlodi@xilinx.com>
The previous naming of the configuration registers made it sound like that if
the bits were set the settings would be enabled, while the opposite is true.
Signed-off-by: Joe Komlodi <komlodi@xilinx.com>
Reviewed-by: Francisco Iglesias <francisco.iglesias@xilinx.com>
Message-id: 1605568264-26376-2-git-send-email-komlodi@xilinx.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
---
hw/block/m25p80.c | 12 ++++++------
1 file changed, 6 insertions(+), 6 deletions(-)
diff --git a/hw/block/m25p80.c b/hw/block/m25p80.c
index d09a811767a..bad72538386 100644
--- a/hw/block/m25p80.c
+++ b/hw/block/m25p80.c
@@ -136,7 +136,7 @@ typedef struct FlashPartInfo {
#define VCFG_WRAP_SEQUENTIAL 0x2
#define NVCFG_XIP_MODE_DISABLED (7 << 9)
#define NVCFG_XIP_MODE_MASK (7 << 9)
-#define VCFG_XIP_MODE_ENABLED (1 << 3)
+#define VCFG_XIP_MODE_DISABLED (1 << 3)
#define CFG_DUMMY_CLK_LEN 4
#define NVCFG_DUMMY_CLK_POS 12
#define VCFG_DUMMY_CLK_POS 4
@@ -144,9 +144,9 @@ typedef struct FlashPartInfo {
#define EVCFG_VPP_ACCELERATOR (1 << 3)
#define EVCFG_RESET_HOLD_ENABLED (1 << 4)
#define NVCFG_DUAL_IO_MASK (1 << 2)
-#define EVCFG_DUAL_IO_ENABLED (1 << 6)
+#define EVCFG_DUAL_IO_DISABLED (1 << 6)
#define NVCFG_QUAD_IO_MASK (1 << 3)
-#define EVCFG_QUAD_IO_ENABLED (1 << 7)
+#define EVCFG_QUAD_IO_DISABLED (1 << 7)
#define NVCFG_4BYTE_ADDR_MASK (1 << 0)
#define NVCFG_LOWER_SEGMENT_MASK (1 << 1)
@@ -769,7 +769,7 @@ static void reset_memory(Flash *s)
s->volatile_cfg |= VCFG_WRAP_SEQUENTIAL;
if ((s->nonvolatile_cfg & NVCFG_XIP_MODE_MASK)
!= NVCFG_XIP_MODE_DISABLED) {
- s->volatile_cfg |= VCFG_XIP_MODE_ENABLED;
+ s->volatile_cfg |= VCFG_XIP_MODE_DISABLED;
}
s->volatile_cfg |= deposit32(s->volatile_cfg,
VCFG_DUMMY_CLK_POS,
@@ -784,10 +784,10 @@ static void reset_memory(Flash *s)
s->enh_volatile_cfg |= EVCFG_VPP_ACCELERATOR;
s->enh_volatile_cfg |= EVCFG_RESET_HOLD_ENABLED;
if (s->nonvolatile_cfg & NVCFG_DUAL_IO_MASK) {
- s->enh_volatile_cfg |= EVCFG_DUAL_IO_ENABLED;
+ s->enh_volatile_cfg |= EVCFG_DUAL_IO_DISABLED;
}
if (s->nonvolatile_cfg & NVCFG_QUAD_IO_MASK) {
- s->enh_volatile_cfg |= EVCFG_QUAD_IO_ENABLED;
+ s->enh_volatile_cfg |= EVCFG_QUAD_IO_DISABLED;
}
if (!(s->nonvolatile_cfg & NVCFG_4BYTE_ADDR_MASK)) {
s->four_bytes_address_mode = true;
--
2.20.1
^ permalink raw reply related [flat|nested] 31+ messages in thread
* [PULL 18/20] hw/block/m25p80: Fix when VCFG XIP bit is set for Numonyx
2020-12-15 14:12 [PULL 00/20] target-arm queue Peter Maydell
` (16 preceding siblings ...)
2020-12-15 14:12 ` [PULL 17/20] hw/block/m25p80: Make Numonyx config field names more accurate Peter Maydell
@ 2020-12-15 14:12 ` Peter Maydell
2020-12-15 14:12 ` [PULL 19/20] hw/block/m25p80: Check SPI mode before running some Numonyx commands Peter Maydell
` (2 subsequent siblings)
20 siblings, 0 replies; 31+ messages in thread
From: Peter Maydell @ 2020-12-15 14:12 UTC (permalink / raw)
To: qemu-devel
From: Joe Komlodi <joe.komlodi@xilinx.com>
VCFG XIP is set (disabled) when the NVCFG XIP bits are all set (disabled).
Signed-off-by: Joe Komlodi <komlodi@xilinx.com>
Reviewed-by: Francisco Iglesias <francisco.iglesias@xilinx.com>
Message-id: 1605568264-26376-3-git-send-email-komlodi@xilinx.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
---
hw/block/m25p80.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/hw/block/m25p80.c b/hw/block/m25p80.c
index bad72538386..7e1d56442f3 100644
--- a/hw/block/m25p80.c
+++ b/hw/block/m25p80.c
@@ -768,7 +768,7 @@ static void reset_memory(Flash *s)
s->volatile_cfg |= VCFG_DUMMY;
s->volatile_cfg |= VCFG_WRAP_SEQUENTIAL;
if ((s->nonvolatile_cfg & NVCFG_XIP_MODE_MASK)
- != NVCFG_XIP_MODE_DISABLED) {
+ == NVCFG_XIP_MODE_DISABLED) {
s->volatile_cfg |= VCFG_XIP_MODE_DISABLED;
}
s->volatile_cfg |= deposit32(s->volatile_cfg,
--
2.20.1
^ permalink raw reply related [flat|nested] 31+ messages in thread
* [PULL 19/20] hw/block/m25p80: Check SPI mode before running some Numonyx commands
2020-12-15 14:12 [PULL 00/20] target-arm queue Peter Maydell
` (17 preceding siblings ...)
2020-12-15 14:12 ` [PULL 18/20] hw/block/m25p80: Fix when VCFG XIP bit is set for Numonyx Peter Maydell
@ 2020-12-15 14:12 ` Peter Maydell
2020-12-15 14:12 ` [PULL 20/20] hw/block/m25p80: Fix Numonyx fast read dummy cycle count Peter Maydell
2020-12-15 21:16 ` [PULL 00/20] target-arm queue Peter Maydell
20 siblings, 0 replies; 31+ messages in thread
From: Peter Maydell @ 2020-12-15 14:12 UTC (permalink / raw)
To: qemu-devel
From: Joe Komlodi <joe.komlodi@xilinx.com>
Some Numonyx flash commands cannot be executed in DIO and QIO mode, such as
trying to do DPP or DOR when in QIO mode.
Signed-off-by: Joe Komlodi <komlodi@xilinx.com>
Reviewed-by: Francisco Iglesias <francisco.iglesias@xilinx.com>
Message-id: 1605568264-26376-4-git-send-email-komlodi@xilinx.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
---
hw/block/m25p80.c | 114 ++++++++++++++++++++++++++++++++++++++--------
1 file changed, 95 insertions(+), 19 deletions(-)
diff --git a/hw/block/m25p80.c b/hw/block/m25p80.c
index 7e1d56442f3..f1d7da65c85 100644
--- a/hw/block/m25p80.c
+++ b/hw/block/m25p80.c
@@ -413,6 +413,12 @@ typedef enum {
MAN_GENERIC,
} Manufacturer;
+typedef enum {
+ MODE_STD = 0,
+ MODE_DIO = 1,
+ MODE_QIO = 2
+} SPIMode;
+
#define M25P80_INTERNAL_DATA_BUFFER_SZ 16
struct Flash {
@@ -820,6 +826,17 @@ static void reset_memory(Flash *s)
trace_m25p80_reset_done(s);
}
+static uint8_t numonyx_mode(Flash *s)
+{
+ if (!(s->enh_volatile_cfg & EVCFG_QUAD_IO_DISABLED)) {
+ return MODE_QIO;
+ } else if (!(s->enh_volatile_cfg & EVCFG_DUAL_IO_DISABLED)) {
+ return MODE_DIO;
+ } else {
+ return MODE_STD;
+ }
+}
+
static void decode_fast_read_cmd(Flash *s)
{
s->needed_bytes = get_addr_length(s);
@@ -950,14 +967,8 @@ static void decode_new_cmd(Flash *s, uint32_t value)
case ERASE4_32K:
case ERASE_SECTOR:
case ERASE4_SECTOR:
- case READ:
- case READ4:
- case DPP:
- case QPP:
- case QPP_4:
case PP:
case PP4:
- case PP4_4:
case DIE_ERASE:
case RDID_90:
case RDID_AB:
@@ -966,24 +977,84 @@ static void decode_new_cmd(Flash *s, uint32_t value)
s->len = 0;
s->state = STATE_COLLECTING_DATA;
break;
+ case READ:
+ case READ4:
+ if (get_man(s) != MAN_NUMONYX || numonyx_mode(s) == MODE_STD) {
+ s->needed_bytes = get_addr_length(s);
+ s->pos = 0;
+ s->len = 0;
+ s->state = STATE_COLLECTING_DATA;
+ } else {
+ qemu_log_mask(LOG_GUEST_ERROR, "M25P80: Cannot execute cmd %x in "
+ "DIO or QIO mode\n", s->cmd_in_progress);
+ }
+ break;
+ case DPP:
+ if (get_man(s) != MAN_NUMONYX || numonyx_mode(s) != MODE_QIO) {
+ s->needed_bytes = get_addr_length(s);
+ s->pos = 0;
+ s->len = 0;
+ s->state = STATE_COLLECTING_DATA;
+ } else {
+ qemu_log_mask(LOG_GUEST_ERROR, "M25P80: Cannot execute cmd %x in "
+ "QIO mode\n", s->cmd_in_progress);
+ }
+ break;
+ case QPP:
+ case QPP_4:
+ case PP4_4:
+ if (get_man(s) != MAN_NUMONYX || numonyx_mode(s) != MODE_DIO) {
+ s->needed_bytes = get_addr_length(s);
+ s->pos = 0;
+ s->len = 0;
+ s->state = STATE_COLLECTING_DATA;
+ } else {
+ qemu_log_mask(LOG_GUEST_ERROR, "M25P80: Cannot execute cmd %x in "
+ "DIO mode\n", s->cmd_in_progress);
+ }
+ break;
case FAST_READ:
case FAST_READ4:
+ decode_fast_read_cmd(s);
+ break;
case DOR:
case DOR4:
+ if (get_man(s) != MAN_NUMONYX || numonyx_mode(s) != MODE_QIO) {
+ decode_fast_read_cmd(s);
+ } else {
+ qemu_log_mask(LOG_GUEST_ERROR, "M25P80: Cannot execute cmd %x in "
+ "QIO mode\n", s->cmd_in_progress);
+ }
+ break;
case QOR:
case QOR4:
- decode_fast_read_cmd(s);
+ if (get_man(s) != MAN_NUMONYX || numonyx_mode(s) != MODE_DIO) {
+ decode_fast_read_cmd(s);
+ } else {
+ qemu_log_mask(LOG_GUEST_ERROR, "M25P80: Cannot execute cmd %x in "
+ "DIO mode\n", s->cmd_in_progress);
+ }
break;
case DIOR:
case DIOR4:
- decode_dio_read_cmd(s);
+ if (get_man(s) != MAN_NUMONYX || numonyx_mode(s) != MODE_QIO) {
+ decode_dio_read_cmd(s);
+ } else {
+ qemu_log_mask(LOG_GUEST_ERROR, "M25P80: Cannot execute cmd %x in "
+ "QIO mode\n", s->cmd_in_progress);
+ }
break;
case QIOR:
case QIOR4:
- decode_qio_read_cmd(s);
+ if (get_man(s) != MAN_NUMONYX || numonyx_mode(s) != MODE_DIO) {
+ decode_qio_read_cmd(s);
+ } else {
+ qemu_log_mask(LOG_GUEST_ERROR, "M25P80: Cannot execute cmd %x in "
+ "DIO mode\n", s->cmd_in_progress);
+ }
break;
case WRSR:
@@ -1035,17 +1106,22 @@ static void decode_new_cmd(Flash *s, uint32_t value)
break;
case JEDEC_READ:
- trace_m25p80_populated_jedec(s);
- for (i = 0; i < s->pi->id_len; i++) {
- s->data[i] = s->pi->id[i];
- }
- for (; i < SPI_NOR_MAX_ID_LEN; i++) {
- s->data[i] = 0;
- }
+ if (get_man(s) != MAN_NUMONYX || numonyx_mode(s) == MODE_STD) {
+ trace_m25p80_populated_jedec(s);
+ for (i = 0; i < s->pi->id_len; i++) {
+ s->data[i] = s->pi->id[i];
+ }
+ for (; i < SPI_NOR_MAX_ID_LEN; i++) {
+ s->data[i] = 0;
+ }
- s->len = SPI_NOR_MAX_ID_LEN;
- s->pos = 0;
- s->state = STATE_READING_DATA;
+ s->len = SPI_NOR_MAX_ID_LEN;
+ s->pos = 0;
+ s->state = STATE_READING_DATA;
+ } else {
+ qemu_log_mask(LOG_GUEST_ERROR, "M25P80: Cannot execute JEDEC read "
+ "in DIO or QIO mode\n");
+ }
break;
case RDCR:
--
2.20.1
^ permalink raw reply related [flat|nested] 31+ messages in thread
* [PULL 20/20] hw/block/m25p80: Fix Numonyx fast read dummy cycle count
2020-12-15 14:12 [PULL 00/20] target-arm queue Peter Maydell
` (18 preceding siblings ...)
2020-12-15 14:12 ` [PULL 19/20] hw/block/m25p80: Check SPI mode before running some Numonyx commands Peter Maydell
@ 2020-12-15 14:12 ` Peter Maydell
2020-12-15 15:06 ` Bin Meng
2020-12-15 21:16 ` [PULL 00/20] target-arm queue Peter Maydell
20 siblings, 1 reply; 31+ messages in thread
From: Peter Maydell @ 2020-12-15 14:12 UTC (permalink / raw)
To: qemu-devel
From: Joe Komlodi <joe.komlodi@xilinx.com>
Numonyx chips determine the number of cycles to wait based on bits 7:4
in the volatile configuration register.
However, if these bits are 0x0 or 0xF, the number of dummy cycles to
wait is 10 for QIOR and QIOR4 commands or when in QIO mode, and otherwise 8 for
the currently supported fast read commands. [1]
[1]
https://www.micron.com/-/media/client/global/documents/products/data-sheet/nor-flash/serial-nor/mt25q/die-rev-b/mt25q_qlkt_u_02g_cbb_0.pdf?rev=9b167fbf2b3645efba6385949a72e453
Signed-off-by: Joe Komlodi <komlodi@xilinx.com>
Reviewed-by: Francisco Iglesias <francisco.iglesias@xilinx.com>
Message-id: 1605568264-26376-5-git-send-email-komlodi@xilinx.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
---
hw/block/m25p80.c | 30 +++++++++++++++++++++++++++---
1 file changed, 27 insertions(+), 3 deletions(-)
diff --git a/hw/block/m25p80.c b/hw/block/m25p80.c
index f1d7da65c85..c45afdd2cb3 100644
--- a/hw/block/m25p80.c
+++ b/hw/block/m25p80.c
@@ -837,6 +837,30 @@ static uint8_t numonyx_mode(Flash *s)
}
}
+static uint8_t numonyx_extract_cfg_num_dummies(Flash *s)
+{
+ uint8_t num_dummies;
+ uint8_t mode;
+ assert(get_man(s) == MAN_NUMONYX);
+
+ mode = numonyx_mode(s);
+ num_dummies = extract32(s->volatile_cfg, 4, 4);
+
+ if (num_dummies == 0x0 || num_dummies == 0xf) {
+ switch (s->cmd_in_progress) {
+ case QIOR:
+ case QIOR4:
+ num_dummies = 10;
+ break;
+ default:
+ num_dummies = (mode == MODE_QIO) ? 10 : 8;
+ break;
+ }
+ }
+
+ return num_dummies;
+}
+
static void decode_fast_read_cmd(Flash *s)
{
s->needed_bytes = get_addr_length(s);
@@ -846,7 +870,7 @@ static void decode_fast_read_cmd(Flash *s)
s->needed_bytes += 8;
break;
case MAN_NUMONYX:
- s->needed_bytes += extract32(s->volatile_cfg, 4, 4);
+ s->needed_bytes += numonyx_extract_cfg_num_dummies(s);
break;
case MAN_MACRONIX:
if (extract32(s->volatile_cfg, 6, 2) == 1) {
@@ -885,7 +909,7 @@ static void decode_dio_read_cmd(Flash *s)
);
break;
case MAN_NUMONYX:
- s->needed_bytes += extract32(s->volatile_cfg, 4, 4);
+ s->needed_bytes += numonyx_extract_cfg_num_dummies(s);
break;
case MAN_MACRONIX:
switch (extract32(s->volatile_cfg, 6, 2)) {
@@ -925,7 +949,7 @@ static void decode_qio_read_cmd(Flash *s)
);
break;
case MAN_NUMONYX:
- s->needed_bytes += extract32(s->volatile_cfg, 4, 4);
+ s->needed_bytes += numonyx_extract_cfg_num_dummies(s);
break;
case MAN_MACRONIX:
switch (extract32(s->volatile_cfg, 6, 2)) {
--
2.20.1
^ permalink raw reply related [flat|nested] 31+ messages in thread
* Re: [PULL 20/20] hw/block/m25p80: Fix Numonyx fast read dummy cycle count
2020-12-15 14:12 ` [PULL 20/20] hw/block/m25p80: Fix Numonyx fast read dummy cycle count Peter Maydell
@ 2020-12-15 15:06 ` Bin Meng
2020-12-15 15:11 ` Peter Maydell
0 siblings, 1 reply; 31+ messages in thread
From: Bin Meng @ 2020-12-15 15:06 UTC (permalink / raw)
To: Peter Maydell, Joe Komlodi; +Cc: qemu-devel@nongnu.org Developers
Hi Joe,
On Tue, Dec 15, 2020 at 10:35 PM Peter Maydell <peter.maydell@linaro.org> wrote:
>
> From: Joe Komlodi <joe.komlodi@xilinx.com>
>
> Numonyx chips determine the number of cycles to wait based on bits 7:4
> in the volatile configuration register.
>
> However, if these bits are 0x0 or 0xF, the number of dummy cycles to
> wait is 10 for QIOR and QIOR4 commands or when in QIO mode, and otherwise 8 for
> the currently supported fast read commands. [1]
>
> [1]
> https://www.micron.com/-/media/client/global/documents/products/data-sheet/nor-flash/serial-nor/mt25q/die-rev-b/mt25q_qlkt_u_02g_cbb_0.pdf?rev=9b167fbf2b3645efba6385949a72e453
>
> Signed-off-by: Joe Komlodi <komlodi@xilinx.com>
> Reviewed-by: Francisco Iglesias <francisco.iglesias@xilinx.com>
> Message-id: 1605568264-26376-5-git-send-email-komlodi@xilinx.com
> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
> ---
> hw/block/m25p80.c | 30 +++++++++++++++++++++++++++---
> 1 file changed, 27 insertions(+), 3 deletions(-)
>
Sorry for jumping in, but I just noticed this patch.
I believe you tested this with Xilinx SPIPS but not some other controllers.
Francisco and I had a discussion about dummy cycles implementation
with different SPI controllers @
http://patchwork.ozlabs.org/project/qemu-devel/patch/1606704602-59435-1-git-send-email-bmeng.cn@gmail.com/
I would like to hear your thoughts. I think we should figure out a
solution that fits all types of controllers.
Regards,
Bin
^ permalink raw reply [flat|nested] 31+ messages in thread
* Re: [PULL 20/20] hw/block/m25p80: Fix Numonyx fast read dummy cycle count
2020-12-15 15:06 ` Bin Meng
@ 2020-12-15 15:11 ` Peter Maydell
2020-12-15 15:42 ` Francisco Iglesias
0 siblings, 1 reply; 31+ messages in thread
From: Peter Maydell @ 2020-12-15 15:11 UTC (permalink / raw)
To: Bin Meng; +Cc: qemu-devel@nongnu.org Developers, Joe Komlodi
On Tue, 15 Dec 2020 at 15:06, Bin Meng <bmeng.cn@gmail.com> wrote:
>
> Hi Joe,
>
> On Tue, Dec 15, 2020 at 10:35 PM Peter Maydell <peter.maydell@linaro.org> wrote:
> >
> > From: Joe Komlodi <joe.komlodi@xilinx.com>
> >
> > Numonyx chips determine the number of cycles to wait based on bits 7:4
> > in the volatile configuration register.
> >
> > However, if these bits are 0x0 or 0xF, the number of dummy cycles to
> > wait is 10 for QIOR and QIOR4 commands or when in QIO mode, and otherwise 8 for
> > the currently supported fast read commands. [1]
> >
> > [1]
> > https://www.micron.com/-/media/client/global/documents/products/data-sheet/nor-flash/serial-nor/mt25q/die-rev-b/mt25q_qlkt_u_02g_cbb_0.pdf?rev=9b167fbf2b3645efba6385949a72e453
> >
> > Signed-off-by: Joe Komlodi <komlodi@xilinx.com>
> > Reviewed-by: Francisco Iglesias <francisco.iglesias@xilinx.com>
> > Message-id: 1605568264-26376-5-git-send-email-komlodi@xilinx.com
> > Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
> > ---
> > hw/block/m25p80.c | 30 +++++++++++++++++++++++++++---
> > 1 file changed, 27 insertions(+), 3 deletions(-)
> >
>
> Sorry for jumping in, but I just noticed this patch.
>
> I believe you tested this with Xilinx SPIPS but not some other controllers.
> Francisco and I had a discussion about dummy cycles implementation
> with different SPI controllers @
> http://patchwork.ozlabs.org/project/qemu-devel/patch/1606704602-59435-1-git-send-email-bmeng.cn@gmail.com/
> I would like to hear your thoughts. I think we should figure out a
> solution that fits all types of controllers.
I don't have an opinion on the technical question. Do you want me
to drop this patch from the pullreq ?
thanks
-- PMM
^ permalink raw reply [flat|nested] 31+ messages in thread
* Re: [PULL 20/20] hw/block/m25p80: Fix Numonyx fast read dummy cycle count
2020-12-15 15:11 ` Peter Maydell
@ 2020-12-15 15:42 ` Francisco Iglesias
2020-12-15 21:15 ` Peter Maydell
0 siblings, 1 reply; 31+ messages in thread
From: Francisco Iglesias @ 2020-12-15 15:42 UTC (permalink / raw)
To: Peter Maydell; +Cc: Bin Meng, qemu-devel@nongnu.org Developers, Joe Komlodi
Hello Peter,
On [2020 Dec 15] Tue 15:11:00, Peter Maydell wrote:
> On Tue, 15 Dec 2020 at 15:06, Bin Meng <bmeng.cn@gmail.com> wrote:
> >
> > Hi Joe,
> >
> > On Tue, Dec 15, 2020 at 10:35 PM Peter Maydell <peter.maydell@linaro.org> wrote:
> > >
> > > From: Joe Komlodi <joe.komlodi@xilinx.com>
> > >
> > > Numonyx chips determine the number of cycles to wait based on bits 7:4
> > > in the volatile configuration register.
> > >
> > > However, if these bits are 0x0 or 0xF, the number of dummy cycles to
> > > wait is 10 for QIOR and QIOR4 commands or when in QIO mode, and otherwise 8 for
> > > the currently supported fast read commands. [1]
> > >
> > > [1]
> > > https://www.micron.com/-/media/client/global/documents/products/data-sheet/nor-flash/serial-nor/mt25q/die-rev-b/mt25q_qlkt_u_02g_cbb_0.pdf?rev=9b167fbf2b3645efba6385949a72e453
> > >
> > > Signed-off-by: Joe Komlodi <komlodi@xilinx.com>
> > > Reviewed-by: Francisco Iglesias <francisco.iglesias@xilinx.com>
> > > Message-id: 1605568264-26376-5-git-send-email-komlodi@xilinx.com
> > > Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
> > > ---
> > > hw/block/m25p80.c | 30 +++++++++++++++++++++++++++---
> > > 1 file changed, 27 insertions(+), 3 deletions(-)
> > >
> >
> > Sorry for jumping in, but I just noticed this patch.
> >
> > I believe you tested this with Xilinx SPIPS but not some other controllers.
> > Francisco and I had a discussion about dummy cycles implementation
> > with different SPI controllers @
> > http://patchwork.ozlabs.org/project/qemu-devel/patch/1606704602-59435-1-git-send-email-bmeng.cn@gmail.com/
> > I would like to hear your thoughts. I think we should figure out a
> > solution that fits all types of controllers.
>
> I don't have an opinion on the technical question. Do you want me
> to drop this patch from the pullreq ?
The patch is correct, it hasn't changed anything regarding how dummy cycles are
modelled in m25p80 (nor this command currently works), it just corrects the
situtation for when the volatile configuration register contains 0x0 or 0xF (as
the commit message mentions).
Best regards,
Francisco Iglesias
>
> thanks
> -- PMM
>
^ permalink raw reply [flat|nested] 31+ messages in thread
* Re: [PULL 20/20] hw/block/m25p80: Fix Numonyx fast read dummy cycle count
2020-12-15 15:42 ` Francisco Iglesias
@ 2020-12-15 21:15 ` Peter Maydell
0 siblings, 0 replies; 31+ messages in thread
From: Peter Maydell @ 2020-12-15 21:15 UTC (permalink / raw)
To: Francisco Iglesias
Cc: Bin Meng, qemu-devel@nongnu.org Developers, Joe Komlodi
On Tue, 15 Dec 2020 at 15:42, Francisco Iglesias
<frasse.iglesias@gmail.com> wrote:
>
> Hello Peter,
>
> On [2020 Dec 15] Tue 15:11:00, Peter Maydell wrote:
> > On Tue, 15 Dec 2020 at 15:06, Bin Meng <bmeng.cn@gmail.com> wrote:
> > > I believe you tested this with Xilinx SPIPS but not some other controllers.
> > > Francisco and I had a discussion about dummy cycles implementation
> > > with different SPI controllers @
> > > http://patchwork.ozlabs.org/project/qemu-devel/patch/1606704602-59435-1-git-send-email-bmeng.cn@gmail.com/
> > > I would like to hear your thoughts. I think we should figure out a
> > > solution that fits all types of controllers.
> >
> > I don't have an opinion on the technical question. Do you want me
> > to drop this patch from the pullreq ?
>
> The patch is correct, it hasn't changed anything regarding how dummy cycles are
> modelled in m25p80 (nor this command currently works), it just corrects the
> situtation for when the volatile configuration register contains 0x0 or 0xF (as
> the commit message mentions).
OK. I've applied the pullreq (partly because this is my last working
day of the year and I don't have the time to respin it). We can
always revert/add fixes in January if necessary.
thanks
- PMM
^ permalink raw reply [flat|nested] 31+ messages in thread
* Re: [PULL 00/20] target-arm queue
2020-12-15 14:12 [PULL 00/20] target-arm queue Peter Maydell
` (19 preceding siblings ...)
2020-12-15 14:12 ` [PULL 20/20] hw/block/m25p80: Fix Numonyx fast read dummy cycle count Peter Maydell
@ 2020-12-15 21:16 ` Peter Maydell
20 siblings, 0 replies; 31+ messages in thread
From: Peter Maydell @ 2020-12-15 21:16 UTC (permalink / raw)
To: QEMU Developers
On Tue, 15 Dec 2020 at 14:12, Peter Maydell <peter.maydell@linaro.org> wrote:
>
> A grab-bag of minor stuff for the end of the year. My to-review
> queue is not empty, but it it at least in single figures...
>
> -- PMM
>
> The following changes since commit 5bfbd8170ce7acb98a1834ff49ed7340b0837144:
>
> Merge remote-tracking branch 'remotes/vivier2/tags/trivial-branch-for-6.0-pull-request' into staging (2020-12-14 20:32:38 +0000)
>
> are available in the Git repository at:
>
> https://git.linaro.org/people/pmaydell/qemu-arm.git tags/pull-target-arm-20201215
>
> for you to fetch changes up to 23af268566069183285bebbdf95b1b37cb7c0942:
>
> hw/block/m25p80: Fix Numonyx fast read dummy cycle count (2020-12-15 13:39:30 +0000)
>
> ----------------------------------------------------------------
> target-arm queue:
> * gdbstub: Correct misparsing of vCont C/S requests
> * openrisc: Move pic_cpu code into CPU object proper
> * nios2: Move IIC code into CPU object proper
> * Improve reporting of ROM overlap errors
> * xlnx-versal: Add USB support
> * hw/misc/zynq_slcr: Avoid #DIV/0! error
> * Numonyx: Fix dummy cycles and check for SPI mode on cmds
Applied, thanks.
Please update the changelog at https://wiki.qemu.org/ChangeLog/6.0
for any user-visible changes.
-- PMM
^ permalink raw reply [flat|nested] 31+ messages in thread
* Re: [PULL 00/20] target-arm queue
2024-03-11 19:12 Peter Maydell
@ 2024-03-12 13:07 ` Peter Maydell
0 siblings, 0 replies; 31+ messages in thread
From: Peter Maydell @ 2024-03-12 13:07 UTC (permalink / raw)
To: qemu-devel
On Mon, 11 Mar 2024 at 19:12, Peter Maydell <peter.maydell@linaro.org> wrote:
>
> The following changes since commit 7489f7f3f81dcb776df8c1b9a9db281fc21bf05f:
>
> Merge tag 'hw-misc-20240309' of https://github.com/philmd/qemu into staging (2024-03-09 20:12:21 +0000)
>
> are available in the Git repository at:
>
> https://git.linaro.org/people/pmaydell/qemu-arm.git tags/pull-target-arm-20240311
>
> for you to fetch changes up to 5dd6bfd90d01e0cb27c349157208e5e4ce883846:
>
> docs: update copyright date to the year 2024 (2024-03-11 17:21:21 +0000)
>
> ----------------------------------------------------------------
> target-arm queue:
> * contrib/elf2dmp: Improve robustness to corrupt input files
> * docs: update copyright date to the year 2024
> * hw/arm: Deprecate various old Arm machine types
>
Applied, thanks.
Please update the changelog at https://wiki.qemu.org/ChangeLog/9.0
for any user-visible changes.
-- PMM
^ permalink raw reply [flat|nested] 31+ messages in thread
* [PULL 00/20] target-arm queue
@ 2024-03-11 19:12 Peter Maydell
2024-03-12 13:07 ` Peter Maydell
0 siblings, 1 reply; 31+ messages in thread
From: Peter Maydell @ 2024-03-11 19:12 UTC (permalink / raw)
To: qemu-devel
The following changes since commit 7489f7f3f81dcb776df8c1b9a9db281fc21bf05f:
Merge tag 'hw-misc-20240309' of https://github.com/philmd/qemu into staging (2024-03-09 20:12:21 +0000)
are available in the Git repository at:
https://git.linaro.org/people/pmaydell/qemu-arm.git tags/pull-target-arm-20240311
for you to fetch changes up to 5dd6bfd90d01e0cb27c349157208e5e4ce883846:
docs: update copyright date to the year 2024 (2024-03-11 17:21:21 +0000)
----------------------------------------------------------------
target-arm queue:
* contrib/elf2dmp: Improve robustness to corrupt input files
* docs: update copyright date to the year 2024
* hw/arm: Deprecate various old Arm machine types
----------------------------------------------------------------
Akihiko Odaki (18):
contrib/elf2dmp: Remove unnecessary err flags
contrib/elf2dmp: Assume error by default
contrib/elf2dmp: Continue even contexts are lacking
contrib/elf2dmp: Change pa_space_create() signature
contrib/elf2dmp: Fix error reporting style in addrspace.c
contrib/elf2dmp: Fix error reporting style in download.c
contrib/elf2dmp: Fix error reporting style in pdb.c
contrib/elf2dmp: Fix error reporting style in qemu_elf.c
contrib/elf2dmp: Fix error reporting style in main.c
contrib/elf2dmp: Always check for PA resolution failure
contrib/elf2dmp: Always destroy PA space
contrib/elf2dmp: Ensure segment fits in file
contrib/elf2dmp: Use lduw_le_p() to read PDB
contrib/elf2dmp: Use rol64() to decode
MAINTAINERS: Add Akihiko Odaki as a elf2dmp reviewer
contrib/elf2dmp: Use GPtrArray
contrib/elf2dmp: Clamp QEMU note to file size
contrib/elf2dmp: Ensure phdrs fit in file
Ani Sinha (1):
docs: update copyright date to the year 2024
Peter Maydell (1):
hw/arm: Deprecate various old Arm machine types
MAINTAINERS | 1 +
docs/about/deprecated.rst | 15 ++++
docs/conf.py | 2 +-
contrib/elf2dmp/addrspace.h | 6 +-
contrib/elf2dmp/download.h | 2 +-
contrib/elf2dmp/pdb.h | 2 +-
contrib/elf2dmp/qemu_elf.h | 2 +-
include/qemu/help-texts.h | 2 +-
contrib/elf2dmp/addrspace.c | 63 ++++++++++-------
contrib/elf2dmp/download.c | 12 ++--
contrib/elf2dmp/main.c | 168 ++++++++++++++++++++------------------------
contrib/elf2dmp/pdb.c | 61 +++++++---------
contrib/elf2dmp/qemu_elf.c | 150 ++++++++++++++++++++++-----------------
hw/arm/gumstix.c | 2 +
hw/arm/mainstone.c | 1 +
hw/arm/nseries.c | 2 +
hw/arm/palm.c | 1 +
hw/arm/spitz.c | 1 +
hw/arm/tosa.c | 1 +
hw/arm/z2.c | 1 +
20 files changed, 263 insertions(+), 232 deletions(-)
^ permalink raw reply [flat|nested] 31+ messages in thread
* Re: [PULL 00/20] target-arm queue
2024-03-05 13:52 Peter Maydell
@ 2024-03-05 15:26 ` Peter Maydell
0 siblings, 0 replies; 31+ messages in thread
From: Peter Maydell @ 2024-03-05 15:26 UTC (permalink / raw)
To: qemu-devel
On Tue, 5 Mar 2024 at 13:52, Peter Maydell <peter.maydell@linaro.org> wrote:
>
> The following changes since commit 4eac9dfbd72d346505642fb45ac3141c7eb2c516:
>
> Merge tag 'pull-tcg-20240301' of https://gitlab.com/rth7680/qemu into staging (2024-03-05 09:45:22 +0000)
>
> are available in the Git repository at:
>
> https://git.linaro.org/people/pmaydell/qemu-arm.git tags/pull-target-arm-20240305
>
> for you to fetch changes up to 7558300c53057126514ee0fd5cf629c65ccc20e1:
>
> qemu-options.hx: Don't claim "-serial" has limit of 4 serial ports (2024-03-05 13:22:56 +0000)
>
> ----------------------------------------------------------------
> target-arm queue:
> * raspi: Implement Broadcom Serial Controller (BSC) for BCM2835 boards
> * hw/char/pl011: Add support for loopback
> * STM32L4x5: Implement RCC clock control device
> * target/arm: Do memory type alignment checks
> * atomic.h: Reword confusing comment for qatomic_cmpxchg
> * qemu-options.hx: Don't claim "-serial" has limit of 4 serial ports
>
> ----------------------------------------------------------------
Applied, thanks.
Please update the changelog at https://wiki.qemu.org/ChangeLog/9.0
for any user-visible changes.
-- PMM
^ permalink raw reply [flat|nested] 31+ messages in thread
* [PULL 00/20] target-arm queue
@ 2024-03-05 13:52 Peter Maydell
2024-03-05 15:26 ` Peter Maydell
0 siblings, 1 reply; 31+ messages in thread
From: Peter Maydell @ 2024-03-05 13:52 UTC (permalink / raw)
To: qemu-devel
The following changes since commit 4eac9dfbd72d346505642fb45ac3141c7eb2c516:
Merge tag 'pull-tcg-20240301' of https://gitlab.com/rth7680/qemu into staging (2024-03-05 09:45:22 +0000)
are available in the Git repository at:
https://git.linaro.org/people/pmaydell/qemu-arm.git tags/pull-target-arm-20240305
for you to fetch changes up to 7558300c53057126514ee0fd5cf629c65ccc20e1:
qemu-options.hx: Don't claim "-serial" has limit of 4 serial ports (2024-03-05 13:22:56 +0000)
----------------------------------------------------------------
target-arm queue:
* raspi: Implement Broadcom Serial Controller (BSC) for BCM2835 boards
* hw/char/pl011: Add support for loopback
* STM32L4x5: Implement RCC clock control device
* target/arm: Do memory type alignment checks
* atomic.h: Reword confusing comment for qatomic_cmpxchg
* qemu-options.hx: Don't claim "-serial" has limit of 4 serial ports
----------------------------------------------------------------
Arnaud Minier (8):
hw/misc/stm32l4x5_rcc: Implement STM32L4x5_RCC skeleton
hw/misc/stm32l4x5_rcc: Add an internal clock multiplexer object
hw/misc/stm32l4x5_rcc: Add an internal PLL Clock object
hw/misc/stm32l4x5_rcc: Initialize PLLs and clock multiplexers
hw/misc/stm32l4x5_rcc: Handle Register Updates
hw/misc/stm32l4x5_rcc: Add write protections to CR register
hw/arm/stm32l4x5_soc.c: Use the RCC Sysclk
tests/qtest/stm32l4x5_rcc-test.c: Add tests for the STM32L4x5_RCC
Peter Maydell (1):
atomic.h: Reword confusing comment for qatomic_cmpxchg
Rayhan Faizel (3):
hw/i2c: Implement Broadcom Serial Controller (BSC)
hw/arm: Connect BSC to BCM2835 board as I2C0, I2C1 and I2C2
tests/qtest: Add testcase for BCM2835 BSC
Richard Henderson (6):
target/arm: Support 32-byte alignment in pow2_align
exec/memattrs: Remove target_tlb_bit*
accel/tcg: Add tlb_fill_flags to CPUTLBEntryFull
accel/tcg: Add TLB_CHECK_ALIGNED
target/arm: Do memory type alignment check when translation disabled
target/arm: Do memory type alignment check when translation enabled
Steven Shen (1):
qemu-options.hx: Don't claim "-serial" has limit of 4 serial ports
Tong Ho (1):
hw/char/pl011: Add support for loopback
MAINTAINERS | 5 +-
docs/system/arm/b-l475e-iot01a.rst | 2 +-
docs/system/arm/raspi.rst | 1 +
include/exec/cpu-all.h | 4 +-
include/exec/memattrs.h | 12 -
include/hw/arm/bcm2835_peripherals.h | 4 +-
include/hw/arm/stm32l4x5_soc.h | 5 +-
include/hw/core/cpu.h | 3 +
include/hw/i2c/bcm2835_i2c.h | 80 ++
include/hw/misc/stm32l4x5_rcc.h | 239 +++++
include/hw/misc/stm32l4x5_rcc_internals.h | 1042 +++++++++++++++++++++
include/qemu/atomic.h | 2 +-
accel/tcg/cputlb.c | 35 +-
hw/arm/b-l475e-iot01a.c | 10 +-
hw/arm/bcm2835_peripherals.c | 45 +-
hw/arm/stm32l4x5_soc.c | 45 +-
hw/char/pl011.c | 110 ++-
hw/i2c/bcm2835_i2c.c | 282 ++++++
hw/misc/stm32l4x5_rcc.c | 1457 +++++++++++++++++++++++++++++
target/arm/ptw.c | 39 +
target/arm/tcg/hflags.c | 34 +-
target/arm/tcg/translate.c | 8 +-
target/sparc/mmu_helper.c | 2 +-
tests/qtest/bcm2835-i2c-test.c | 115 +++
tests/qtest/stm32l4x5_rcc-test.c | 189 ++++
hw/arm/Kconfig | 2 +
hw/i2c/Kconfig | 4 +
hw/i2c/meson.build | 1 +
hw/misc/Kconfig | 3 +
hw/misc/meson.build | 1 +
hw/misc/trace-events | 14 +
qemu-options.hx | 2 +-
tests/qtest/meson.build | 5 +-
33 files changed, 3718 insertions(+), 84 deletions(-)
create mode 100644 include/hw/i2c/bcm2835_i2c.h
create mode 100644 include/hw/misc/stm32l4x5_rcc.h
create mode 100644 include/hw/misc/stm32l4x5_rcc_internals.h
create mode 100644 hw/i2c/bcm2835_i2c.c
create mode 100644 hw/misc/stm32l4x5_rcc.c
create mode 100644 tests/qtest/bcm2835-i2c-test.c
create mode 100644 tests/qtest/stm32l4x5_rcc-test.c
^ permalink raw reply [flat|nested] 31+ messages in thread
* [PULL 00/20] target-arm queue
@ 2020-01-23 15:30 Peter Maydell
0 siblings, 0 replies; 31+ messages in thread
From: Peter Maydell @ 2020-01-23 15:30 UTC (permalink / raw)
To: qemu-devel
The following changes since commit b7c359c748a2e3ccb97a184b9739feb2cd48de2f:
Merge remote-tracking branch 'remotes/vivier2/tags/linux-user-for-5.0-pull-request' into staging (2020-01-23 14:38:43 +0000)
are available in the Git repository at:
https://git.linaro.org/people/pmaydell/qemu-arm.git tags/pull-target-arm-20200123
for you to fetch changes up to 53c75ad8e72dc3a5102de7ed21e4990969cb0a19:
hw/arm/exynos4210: Connect serial port DMA busy signals with pl330 (2020-01-23 15:22:42 +0000)
----------------------------------------------------------------
target-arm queue:
* fix bug in PAuth emulation
* add PMU to Cortex-R5, Cortex-R5F
* qemu-nbd: Convert documentation to rST
* qemu-block-drivers: Convert documentation to rST
* Fix Exynos4210 UART DMA support
* Various minor code cleanups
----------------------------------------------------------------
Andrew Jones (1):
target/arm/arch_dump: Add SVE notes
Clement Deschamps (1):
target/arm: add PMU feature to cortex-r5 and cortex-r5f
Guenter Roeck (8):
dma/pl330: Convert to support tracing
hw/core/or-irq: Increase limit of or-lines to 48
hw/arm/exynos4210: Fix DMA initialization
hw/char/exynos4210_uart: Convert to support tracing
hw/char/exynos4210_uart: Implement post_load function
hw/char/exynos4210_uart: Implement Rx FIFO level triggers and timeouts
hw/char/exynos4210_uart: Add receive DMA support
hw/arm/exynos4210: Connect serial port DMA busy signals with pl330
Keqian Zhu (2):
hw/acpi: Remove extra indent in ACPI GED hotplug cb
hw/arm: Use helper function to trigger hotplug handler plug
Peter Maydell (3):
qemu-nbd: Convert invocation documentation to rST
docs: Create stub system manual
qemu-block-drivers: Convert to rST
Philippe Mathieu-Daudé (1):
hw/misc/stm32f4xx_syscfg: Fix copy/paste error
Richard Henderson (3):
tests/tcg/aarch64: Fix compilation parameters for pauth-%
tests/tcg/aarch64: Add pauth-3
tests/tcg/aarch64: Add pauth-4
Vincent Dehors (1):
target/arm: Fix PAuth sbox functions
Makefile | 37 +-
tests/tcg/aarch64/Makefile.softmmu-target | 5 +-
tests/tcg/aarch64/Makefile.target | 3 +-
include/elf.h | 1 +
include/hw/arm/exynos4210.h | 4 +
include/hw/or-irq.h | 2 +-
target/arm/cpu.h | 25 +
hw/acpi/generic_event_device.c | 2 +-
hw/arm/exynos4210.c | 77 ++-
hw/arm/virt.c | 6 +-
hw/char/exynos4210_uart.c | 245 +++++---
hw/dma/pl330.c | 88 +--
hw/misc/stm32f4xx_syscfg.c | 2 +-
target/arm/arch_dump.c | 124 +++-
target/arm/cpu.c | 1 +
target/arm/kvm64.c | 24 -
target/arm/pauth_helper.c | 4 +-
tests/tcg/aarch64/pauth-1.c | 2 -
tests/tcg/aarch64/pauth-2.c | 2 -
tests/tcg/aarch64/pauth-4.c | 25 +
tests/tcg/aarch64/system/pauth-3.c | 40 ++
MAINTAINERS | 1 +
docs/index.html.in | 1 +
docs/interop/conf.py | 4 +-
docs/interop/index.rst | 1 +
docs/interop/qemu-nbd.rst | 263 ++++++++
docs/interop/qemu-option-trace.rst.inc | 30 +
docs/qemu-block-drivers.texi | 889 ---------------------------
docs/system/conf.py | 22 +
docs/system/index.rst | 17 +
docs/system/qemu-block-drivers.rst | 985 ++++++++++++++++++++++++++++++
hw/char/trace-events | 20 +
hw/dma/trace-events | 24 +
qemu-doc.texi | 18 -
qemu-nbd.texi | 214 -------
qemu-option-trace.texi | 4 +
qemu-options.hx | 2 +-
37 files changed, 1897 insertions(+), 1317 deletions(-)
create mode 100644 tests/tcg/aarch64/pauth-4.c
create mode 100644 tests/tcg/aarch64/system/pauth-3.c
create mode 100644 docs/interop/qemu-nbd.rst
create mode 100644 docs/interop/qemu-option-trace.rst.inc
delete mode 100644 docs/qemu-block-drivers.texi
create mode 100644 docs/system/conf.py
create mode 100644 docs/system/index.rst
create mode 100644 docs/system/qemu-block-drivers.rst
delete mode 100644 qemu-nbd.texi
^ permalink raw reply [flat|nested] 31+ messages in thread
end of thread, other threads:[~2024-03-12 13:08 UTC | newest]
Thread overview: 31+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2020-12-15 14:12 [PULL 00/20] target-arm queue Peter Maydell
2020-12-15 14:12 ` [PULL 01/20] gdbstub: Correct misparsing of vCont C/S requests Peter Maydell
2020-12-15 14:12 ` [PULL 02/20] hw/openrisc/openrisc_sim: Use IRQ splitter when connecting IRQ to multiple CPUs Peter Maydell
2020-12-15 14:12 ` [PULL 03/20] hw/openrisc/openrisc_sim: Abstract out "get IRQ x of CPU y" Peter Maydell
2020-12-15 14:12 ` [PULL 04/20] target/openrisc: Move pic_cpu code into CPU object proper Peter Maydell
2020-12-15 14:12 ` [PULL 05/20] target/nios2: Move IIC " Peter Maydell
2020-12-15 14:12 ` [PULL 06/20] target/nios2: Move nios2_check_interrupts() into target/nios2 Peter Maydell
2020-12-15 14:12 ` [PULL 07/20] target/nios2: Use deposit32() to update ipending register Peter Maydell
2020-12-15 14:12 ` [PULL 08/20] hw/core/loader.c: Track last-seen ROM in rom_check_and_register_reset() Peter Maydell
2020-12-15 14:12 ` [PULL 09/20] hw/core/loader.c: Improve reporting of ROM overlap errors Peter Maydell
2020-12-15 14:12 ` [PULL 10/20] elf_ops.h: Don't truncate name of the ROM blobs we create Peter Maydell
2020-12-15 14:12 ` [PULL 11/20] elf_ops.h: Be more verbose with ROM blob names Peter Maydell
2020-12-15 14:12 ` [PULL 12/20] usb: Add versal-usb2-ctrl-regs module Peter Maydell
2020-12-15 14:12 ` [PULL 13/20] usb: Add DWC3 model Peter Maydell
2020-12-15 14:12 ` [PULL 14/20] usb: xlnx-usb-subsystem: Add xilinx usb subsystem Peter Maydell
2020-12-15 14:12 ` [PULL 15/20] arm: xlnx-versal: Connect usb to virt-versal Peter Maydell
2020-12-15 14:12 ` [PULL 16/20] hw/misc/zynq_slcr: Avoid #DIV/0! error Peter Maydell
2020-12-15 14:12 ` [PULL 17/20] hw/block/m25p80: Make Numonyx config field names more accurate Peter Maydell
2020-12-15 14:12 ` [PULL 18/20] hw/block/m25p80: Fix when VCFG XIP bit is set for Numonyx Peter Maydell
2020-12-15 14:12 ` [PULL 19/20] hw/block/m25p80: Check SPI mode before running some Numonyx commands Peter Maydell
2020-12-15 14:12 ` [PULL 20/20] hw/block/m25p80: Fix Numonyx fast read dummy cycle count Peter Maydell
2020-12-15 15:06 ` Bin Meng
2020-12-15 15:11 ` Peter Maydell
2020-12-15 15:42 ` Francisco Iglesias
2020-12-15 21:15 ` Peter Maydell
2020-12-15 21:16 ` [PULL 00/20] target-arm queue Peter Maydell
-- strict thread matches above, loose matches on Subject: below --
2024-03-11 19:12 Peter Maydell
2024-03-12 13:07 ` Peter Maydell
2024-03-05 13:52 Peter Maydell
2024-03-05 15:26 ` Peter Maydell
2020-01-23 15:30 Peter Maydell
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.