[PATCH v4 00/18] vdpa: generalize vdpa simulator

[PATCH v4 00/18] vdpa: generalize vdpa simulator

[Stefano Garzarella]

This series moves the network device simulator in a new module
(vdpa_sim_net) and leaves the generic functions in the vdpa_sim core
module, allowing the possibility to add new vDPA device simulators.

For now I removed the vdpa-blk simulator patches, since I'm still working
on them and debugging the iotlb issues.

Thanks to Max that started this work! I took his patches and extended a bit.

v1: https://lists.linuxfoundation.org/pipermail/virtualization/2020-November/050677.html
v2: https://lists.linuxfoundation.org/pipermail/virtualization/2020-November/051036.html
v3: https://lists.linuxfoundation.org/pipermail/virtualization/2020-December/051195.html

v4:
 - rebased on Linux v5.10
 - checked better which headers are not directly used [Randy]
 - removed patches that set unlimited iotlb and added a module
   parameter [Jason]
 - explained in the commit message that .get_config stuff moving
   is safe [Jason]
 - fixed typo in Kconfig (s/loop/loops) [Randy]

Max Gurtovoy (2):
  vdpa_sim: remove hard-coded virtq count
  vdpa: split vdpasim to core and net modules

Stefano Garzarella (16):
  vdpa: remove unnecessary 'default n' in Kconfig entries
  vdpa_sim: remove unnecessary headers inclusion
  vdpa_sim: make IOTLB entries limit configurable
  vdpa_sim: rename vdpasim_config_ops variables
  vdpa_sim: add struct vdpasim_dev_attr for device attributes
  vdpa_sim: add device id field in vdpasim_dev_attr
  vdpa_sim: add supported_features field in vdpasim_dev_attr
  vdpa_sim: add work_fn in vdpasim_dev_attr
  vdpa_sim: store parsed MAC address in a buffer
  vdpa_sim: make 'config' generic and usable for any device type
  vdpa_sim: add get_config callback in vdpasim_dev_attr
  vdpa_sim: add set_config callback in vdpasim_dev_attr
  vdpa_sim: set vringh notify callback
  vdpa_sim: use kvmalloc to allocate vdpasim->buffer
  vdpa_sim: make vdpasim->buffer size configurable
  vdpa_sim: split vdpasim_virtqueue's iov field in out_iov and in_iov

 drivers/vdpa/vdpa_sim/vdpa_sim.h     | 105 ++++++++++
 drivers/vdpa/vdpa_sim/vdpa_sim.c     | 298 ++++++++-------------------
 drivers/vdpa/vdpa_sim/vdpa_sim_net.c | 177 ++++++++++++++++
 drivers/vdpa/Kconfig                 |  16 +-
 drivers/vdpa/vdpa_sim/Makefile       |   1 +
 5 files changed, 374 insertions(+), 223 deletions(-)
 create mode 100644 drivers/vdpa/vdpa_sim/vdpa_sim.h
 create mode 100644 drivers/vdpa/vdpa_sim/vdpa_sim_net.c

-- 
2.26.2

[PATCH v4 00/18] vdpa: generalize vdpa simulator

[Stefano Garzarella]

This series moves the network device simulator in a new module
(vdpa_sim_net) and leaves the generic functions in the vdpa_sim core
module, allowing the possibility to add new vDPA device simulators.

For now I removed the vdpa-blk simulator patches, since I'm still working
on them and debugging the iotlb issues.

Thanks to Max that started this work! I took his patches and extended a bit.

v1: https://lists.linuxfoundation.org/pipermail/virtualization/2020-November/050677.html
v2: https://lists.linuxfoundation.org/pipermail/virtualization/2020-November/051036.html
v3: https://lists.linuxfoundation.org/pipermail/virtualization/2020-December/051195.html

v4:
 - rebased on Linux v5.10
 - checked better which headers are not directly used [Randy]
 - removed patches that set unlimited iotlb and added a module
   parameter [Jason]
 - explained in the commit message that .get_config stuff moving
   is safe [Jason]
 - fixed typo in Kconfig (s/loop/loops) [Randy]

Max Gurtovoy (2):
  vdpa_sim: remove hard-coded virtq count
  vdpa: split vdpasim to core and net modules

Stefano Garzarella (16):
  vdpa: remove unnecessary 'default n' in Kconfig entries
  vdpa_sim: remove unnecessary headers inclusion
  vdpa_sim: make IOTLB entries limit configurable
  vdpa_sim: rename vdpasim_config_ops variables
  vdpa_sim: add struct vdpasim_dev_attr for device attributes
  vdpa_sim: add device id field in vdpasim_dev_attr
  vdpa_sim: add supported_features field in vdpasim_dev_attr
  vdpa_sim: add work_fn in vdpasim_dev_attr
  vdpa_sim: store parsed MAC address in a buffer
  vdpa_sim: make 'config' generic and usable for any device type
  vdpa_sim: add get_config callback in vdpasim_dev_attr
  vdpa_sim: add set_config callback in vdpasim_dev_attr
  vdpa_sim: set vringh notify callback
  vdpa_sim: use kvmalloc to allocate vdpasim->buffer
  vdpa_sim: make vdpasim->buffer size configurable
  vdpa_sim: split vdpasim_virtqueue's iov field in out_iov and in_iov

 drivers/vdpa/vdpa_sim/vdpa_sim.h     | 105 ++++++++++
 drivers/vdpa/vdpa_sim/vdpa_sim.c     | 298 ++++++++-------------------
 drivers/vdpa/vdpa_sim/vdpa_sim_net.c | 177 ++++++++++++++++
 drivers/vdpa/Kconfig                 |  16 +-
 drivers/vdpa/vdpa_sim/Makefile       |   1 +
 5 files changed, 374 insertions(+), 223 deletions(-)
 create mode 100644 drivers/vdpa/vdpa_sim/vdpa_sim.h
 create mode 100644 drivers/vdpa/vdpa_sim/vdpa_sim_net.c

-- 
2.26.2

_______________________________________________
Virtualization mailing list
Virtualization@lists.linux-foundation.org
https://lists.linuxfoundation.org/mailman/listinfo/virtualization

[PATCH v4 01/18] vdpa: remove unnecessary 'default n' in Kconfig entries

[Stefano Garzarella]

'default n' is not necessary since it is already the default when
nothing is specified.

Suggested-by: Jason Wang <jasowang@redhat.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: Stefano Garzarella <sgarzare@redhat.com>
---
 drivers/vdpa/Kconfig | 3 ---
 1 file changed, 3 deletions(-)

diff --git a/drivers/vdpa/Kconfig b/drivers/vdpa/Kconfig
index 6caf539091e5..2c892e890b9e 100644
--- a/drivers/vdpa/Kconfig
+++ b/drivers/vdpa/Kconfig
@@ -14,7 +14,6 @@ config VDPA_SIM
 	select DMA_OPS
 	select VHOST_RING
 	select GENERIC_NET_UTILS
-	default n
 	help
 	  vDPA networking device simulator which loop TX traffic back
 	  to RX. This device is used for testing, prototyping and
@@ -23,7 +22,6 @@ config VDPA_SIM
 config IFCVF
 	tristate "Intel IFC VF vDPA driver"
 	depends on PCI_MSI
-	default n
 	help
 	  This kernel module can drive Intel IFC VF NIC to offload
 	  virtio dataplane traffic to hardware.
@@ -42,7 +40,6 @@ config MLX5_VDPA_NET
 	tristate "vDPA driver for ConnectX devices"
 	select MLX5_VDPA
 	depends on MLX5_CORE
-	default n
 	help
 	  VDPA network driver for ConnectX6 and newer. Provides offloading
 	  of virtio net datapath such that descriptors put on the ring will
-- 
2.26.2

[PATCH v4 01/18] vdpa: remove unnecessary 'default n' in Kconfig entries

[Stefano Garzarella]

'default n' is not necessary since it is already the default when
nothing is specified.

Suggested-by: Jason Wang <jasowang@redhat.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: Stefano Garzarella <sgarzare@redhat.com>
---
 drivers/vdpa/Kconfig | 3 ---
 1 file changed, 3 deletions(-)

diff --git a/drivers/vdpa/Kconfig b/drivers/vdpa/Kconfig
index 6caf539091e5..2c892e890b9e 100644
--- a/drivers/vdpa/Kconfig
+++ b/drivers/vdpa/Kconfig
@@ -14,7 +14,6 @@ config VDPA_SIM
 	select DMA_OPS
 	select VHOST_RING
 	select GENERIC_NET_UTILS
-	default n
 	help
 	  vDPA networking device simulator which loop TX traffic back
 	  to RX. This device is used for testing, prototyping and
@@ -23,7 +22,6 @@ config VDPA_SIM
 config IFCVF
 	tristate "Intel IFC VF vDPA driver"
 	depends on PCI_MSI
-	default n
 	help
 	  This kernel module can drive Intel IFC VF NIC to offload
 	  virtio dataplane traffic to hardware.
@@ -42,7 +40,6 @@ config MLX5_VDPA_NET
 	tristate "vDPA driver for ConnectX devices"
 	select MLX5_VDPA
 	depends on MLX5_CORE
-	default n
 	help
 	  VDPA network driver for ConnectX6 and newer. Provides offloading
 	  of virtio net datapath such that descriptors put on the ring will
-- 
2.26.2

_______________________________________________
Virtualization mailing list
Virtualization@lists.linux-foundation.org
https://lists.linuxfoundation.org/mailman/listinfo/virtualization

[PATCH v4 02/18] vdpa_sim: remove unnecessary headers inclusion

[Stefano Garzarella]

Some headers are not necessary, so let's remove them to do
some cleaning.

Signed-off-by: Stefano Garzarella <sgarzare@redhat.com>
---
v4:
- checked better which headers are not directly used [Randy]

v3:
- avoided to remove some headers with structures and functions directly
  used (device.h, slab.h, virtio_byteorder.h)[Jason]
---
 drivers/vdpa/vdpa_sim/vdpa_sim.c | 7 -------
 1 file changed, 7 deletions(-)

diff --git a/drivers/vdpa/vdpa_sim/vdpa_sim.c b/drivers/vdpa/vdpa_sim/vdpa_sim.c
index 6a90fdb9cbfc..63b85541fb5e 100644
--- a/drivers/vdpa/vdpa_sim/vdpa_sim.c
+++ b/drivers/vdpa/vdpa_sim/vdpa_sim.c
@@ -11,16 +11,9 @@
 #include <linux/module.h>
 #include <linux/device.h>
 #include <linux/kernel.h>
-#include <linux/fs.h>
-#include <linux/poll.h>
 #include <linux/slab.h>
 #include <linux/sched.h>
-#include <linux/wait.h>
-#include <linux/uuid.h>
-#include <linux/iommu.h>
 #include <linux/dma-map-ops.h>
-#include <linux/sysfs.h>
-#include <linux/file.h>
 #include <linux/etherdevice.h>
 #include <linux/vringh.h>
 #include <linux/vdpa.h>
-- 
2.26.2

[PATCH v4 02/18] vdpa_sim: remove unnecessary headers inclusion

[Stefano Garzarella]

Some headers are not necessary, so let's remove them to do
some cleaning.

Signed-off-by: Stefano Garzarella <sgarzare@redhat.com>
---
v4:
- checked better which headers are not directly used [Randy]

v3:
- avoided to remove some headers with structures and functions directly
  used (device.h, slab.h, virtio_byteorder.h)[Jason]
---
 drivers/vdpa/vdpa_sim/vdpa_sim.c | 7 -------
 1 file changed, 7 deletions(-)

diff --git a/drivers/vdpa/vdpa_sim/vdpa_sim.c b/drivers/vdpa/vdpa_sim/vdpa_sim.c
index 6a90fdb9cbfc..63b85541fb5e 100644
--- a/drivers/vdpa/vdpa_sim/vdpa_sim.c
+++ b/drivers/vdpa/vdpa_sim/vdpa_sim.c
@@ -11,16 +11,9 @@
 #include <linux/module.h>
 #include <linux/device.h>
 #include <linux/kernel.h>
-#include <linux/fs.h>
-#include <linux/poll.h>
 #include <linux/slab.h>
 #include <linux/sched.h>
-#include <linux/wait.h>
-#include <linux/uuid.h>
-#include <linux/iommu.h>
 #include <linux/dma-map-ops.h>
-#include <linux/sysfs.h>
-#include <linux/file.h>
 #include <linux/etherdevice.h>
 #include <linux/vringh.h>
 #include <linux/vdpa.h>
-- 
2.26.2

_______________________________________________
Virtualization mailing list
Virtualization@lists.linux-foundation.org
https://lists.linuxfoundation.org/mailman/listinfo/virtualization

[PATCH v4 03/18] vdpa_sim: remove hard-coded virtq count

[Stefano Garzarella]

From: Max Gurtovoy <mgurtovoy@nvidia.com>

Add a new attribute that will define the number of virt queues to be
created for the vdpasim device.

Signed-off-by: Max Gurtovoy <mgurtovoy@nvidia.com>
[sgarzare: replace kmalloc_array() with kcalloc()]
Acked-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: Stefano Garzarella <sgarzare@redhat.com>
---
v1:
- use kcalloc() instead of kmalloc_array() since some function expects
  variables initialized to zero
---
 drivers/vdpa/vdpa_sim/vdpa_sim.c | 18 +++++++++++++-----
 1 file changed, 13 insertions(+), 5 deletions(-)

diff --git a/drivers/vdpa/vdpa_sim/vdpa_sim.c b/drivers/vdpa/vdpa_sim/vdpa_sim.c
index 63b85541fb5e..07ccc8609784 100644
--- a/drivers/vdpa/vdpa_sim/vdpa_sim.c
+++ b/drivers/vdpa/vdpa_sim/vdpa_sim.c
@@ -63,7 +63,7 @@ static u64 vdpasim_features = (1ULL << VIRTIO_F_ANY_LAYOUT) |
 /* State of each vdpasim device */
 struct vdpasim {
 	struct vdpa_device vdpa;
-	struct vdpasim_virtqueue vqs[VDPASIM_VQ_NUM];
+	struct vdpasim_virtqueue *vqs;
 	struct work_struct work;
 	/* spinlock to synchronize virtqueue state */
 	spinlock_t lock;
@@ -73,6 +73,7 @@ struct vdpasim {
 	u32 status;
 	u32 generation;
 	u64 features;
+	int nvqs;
 	/* spinlock to synchronize iommu table */
 	spinlock_t iommu_lock;
 };
@@ -137,7 +138,7 @@ static void vdpasim_reset(struct vdpasim *vdpasim)
 {
 	int i;
 
-	for (i = 0; i < VDPASIM_VQ_NUM; i++)
+	for (i = 0; i < vdpasim->nvqs; i++)
 		vdpasim_vq_reset(&vdpasim->vqs[i]);
 
 	spin_lock(&vdpasim->iommu_lock);
@@ -343,7 +344,7 @@ static struct vdpasim *vdpasim_create(void)
 	const struct vdpa_config_ops *ops;
 	struct vdpasim *vdpasim;
 	struct device *dev;
-	int ret = -ENOMEM;
+	int i, ret = -ENOMEM;
 
 	if (batch_mapping)
 		ops = &vdpasim_net_batch_config_ops;
@@ -354,6 +355,7 @@ static struct vdpasim *vdpasim_create(void)
 	if (!vdpasim)
 		goto err_alloc;
 
+	vdpasim->nvqs = VDPASIM_VQ_NUM;
 	INIT_WORK(&vdpasim->work, vdpasim_work);
 	spin_lock_init(&vdpasim->lock);
 	spin_lock_init(&vdpasim->iommu_lock);
@@ -364,6 +366,11 @@ static struct vdpasim *vdpasim_create(void)
 		goto err_iommu;
 	set_dma_ops(dev, &vdpasim_dma_ops);
 
+	vdpasim->vqs = kcalloc(vdpasim->nvqs, sizeof(struct vdpasim_virtqueue),
+			       GFP_KERNEL);
+	if (!vdpasim->vqs)
+		goto err_iommu;
+
 	vdpasim->iommu = vhost_iotlb_alloc(2048, 0);
 	if (!vdpasim->iommu)
 		goto err_iommu;
@@ -382,8 +389,8 @@ static struct vdpasim *vdpasim_create(void)
 		eth_random_addr(vdpasim->config.mac);
 	}
 
-	vringh_set_iotlb(&vdpasim->vqs[0].vring, vdpasim->iommu);
-	vringh_set_iotlb(&vdpasim->vqs[1].vring, vdpasim->iommu);
+	for (i = 0; i < vdpasim->nvqs; i++)
+		vringh_set_iotlb(&vdpasim->vqs[i].vring, vdpasim->iommu);
 
 	vdpasim->vdpa.dma_dev = dev;
 	ret = vdpa_register_device(&vdpasim->vdpa);
@@ -652,6 +659,7 @@ static void vdpasim_free(struct vdpa_device *vdpa)
 	kfree(vdpasim->buffer);
 	if (vdpasim->iommu)
 		vhost_iotlb_free(vdpasim->iommu);
+	kfree(vdpasim->vqs);
 }
 
 static const struct vdpa_config_ops vdpasim_net_config_ops = {
-- 
2.26.2

[PATCH v4 03/18] vdpa_sim: remove hard-coded virtq count

[Stefano Garzarella]

From: Max Gurtovoy <mgurtovoy@nvidia.com>

Add a new attribute that will define the number of virt queues to be
created for the vdpasim device.

Signed-off-by: Max Gurtovoy <mgurtovoy@nvidia.com>
[sgarzare: replace kmalloc_array() with kcalloc()]
Acked-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: Stefano Garzarella <sgarzare@redhat.com>
---
v1:
- use kcalloc() instead of kmalloc_array() since some function expects
  variables initialized to zero
---
 drivers/vdpa/vdpa_sim/vdpa_sim.c | 18 +++++++++++++-----
 1 file changed, 13 insertions(+), 5 deletions(-)

diff --git a/drivers/vdpa/vdpa_sim/vdpa_sim.c b/drivers/vdpa/vdpa_sim/vdpa_sim.c
index 63b85541fb5e..07ccc8609784 100644
--- a/drivers/vdpa/vdpa_sim/vdpa_sim.c
+++ b/drivers/vdpa/vdpa_sim/vdpa_sim.c
@@ -63,7 +63,7 @@ static u64 vdpasim_features = (1ULL << VIRTIO_F_ANY_LAYOUT) |
 /* State of each vdpasim device */
 struct vdpasim {
 	struct vdpa_device vdpa;
-	struct vdpasim_virtqueue vqs[VDPASIM_VQ_NUM];
+	struct vdpasim_virtqueue *vqs;
 	struct work_struct work;
 	/* spinlock to synchronize virtqueue state */
 	spinlock_t lock;
@@ -73,6 +73,7 @@ struct vdpasim {
 	u32 status;
 	u32 generation;
 	u64 features;
+	int nvqs;
 	/* spinlock to synchronize iommu table */
 	spinlock_t iommu_lock;
 };
@@ -137,7 +138,7 @@ static void vdpasim_reset(struct vdpasim *vdpasim)
 {
 	int i;
 
-	for (i = 0; i < VDPASIM_VQ_NUM; i++)
+	for (i = 0; i < vdpasim->nvqs; i++)
 		vdpasim_vq_reset(&vdpasim->vqs[i]);
 
 	spin_lock(&vdpasim->iommu_lock);
@@ -343,7 +344,7 @@ static struct vdpasim *vdpasim_create(void)
 	const struct vdpa_config_ops *ops;
 	struct vdpasim *vdpasim;
 	struct device *dev;
-	int ret = -ENOMEM;
+	int i, ret = -ENOMEM;
 
 	if (batch_mapping)
 		ops = &vdpasim_net_batch_config_ops;
@@ -354,6 +355,7 @@ static struct vdpasim *vdpasim_create(void)
 	if (!vdpasim)
 		goto err_alloc;
 
+	vdpasim->nvqs = VDPASIM_VQ_NUM;
 	INIT_WORK(&vdpasim->work, vdpasim_work);
 	spin_lock_init(&vdpasim->lock);
 	spin_lock_init(&vdpasim->iommu_lock);
@@ -364,6 +366,11 @@ static struct vdpasim *vdpasim_create(void)
 		goto err_iommu;
 	set_dma_ops(dev, &vdpasim_dma_ops);
 
+	vdpasim->vqs = kcalloc(vdpasim->nvqs, sizeof(struct vdpasim_virtqueue),
+			       GFP_KERNEL);
+	if (!vdpasim->vqs)
+		goto err_iommu;
+
 	vdpasim->iommu = vhost_iotlb_alloc(2048, 0);
 	if (!vdpasim->iommu)
 		goto err_iommu;
@@ -382,8 +389,8 @@ static struct vdpasim *vdpasim_create(void)
 		eth_random_addr(vdpasim->config.mac);
 	}
 
-	vringh_set_iotlb(&vdpasim->vqs[0].vring, vdpasim->iommu);
-	vringh_set_iotlb(&vdpasim->vqs[1].vring, vdpasim->iommu);
+	for (i = 0; i < vdpasim->nvqs; i++)
+		vringh_set_iotlb(&vdpasim->vqs[i].vring, vdpasim->iommu);
 
 	vdpasim->vdpa.dma_dev = dev;
 	ret = vdpa_register_device(&vdpasim->vdpa);
@@ -652,6 +659,7 @@ static void vdpasim_free(struct vdpa_device *vdpa)
 	kfree(vdpasim->buffer);
 	if (vdpasim->iommu)
 		vhost_iotlb_free(vdpasim->iommu);
+	kfree(vdpasim->vqs);
 }
 
 static const struct vdpa_config_ops vdpasim_net_config_ops = {
-- 
2.26.2

_______________________________________________
Virtualization mailing list
Virtualization@lists.linux-foundation.org
https://lists.linuxfoundation.org/mailman/listinfo/virtualization

[PATCH v4 04/18] vdpa_sim: make IOTLB entries limit configurable

[Stefano Garzarella]

Some devices may require a higher limit for the number of IOTLB
entries, so let's make it configurable through a module parameter.

By default, it's initialized with the current limit (2048).

Suggested-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: Stefano Garzarella <sgarzare@redhat.com>
---
 drivers/vdpa/vdpa_sim/vdpa_sim.c | 7 ++++++-
 1 file changed, 6 insertions(+), 1 deletion(-)

diff --git a/drivers/vdpa/vdpa_sim/vdpa_sim.c b/drivers/vdpa/vdpa_sim/vdpa_sim.c
index 07ccc8609784..d716bfaadb3b 100644
--- a/drivers/vdpa/vdpa_sim/vdpa_sim.c
+++ b/drivers/vdpa/vdpa_sim/vdpa_sim.c
@@ -31,6 +31,11 @@ static int batch_mapping = 1;
 module_param(batch_mapping, int, 0444);
 MODULE_PARM_DESC(batch_mapping, "Batched mapping 1 -Enable; 0 - Disable");
 
+static int max_iotlb_entries = 2048;
+module_param(max_iotlb_entries, int, 0444);
+MODULE_PARM_DESC(max_iotlb_entries,
+		 "Maximum number of iotlb entries. 0 means unlimited. (default: 2048)");
+
 static char *macaddr;
 module_param(macaddr, charp, 0);
 MODULE_PARM_DESC(macaddr, "Ethernet MAC address");
@@ -371,7 +376,7 @@ static struct vdpasim *vdpasim_create(void)
 	if (!vdpasim->vqs)
 		goto err_iommu;
 
-	vdpasim->iommu = vhost_iotlb_alloc(2048, 0);
+	vdpasim->iommu = vhost_iotlb_alloc(max_iotlb_entries, 0);
 	if (!vdpasim->iommu)
 		goto err_iommu;
 
-- 
2.26.2

[PATCH v4 04/18] vdpa_sim: make IOTLB entries limit configurable

[Stefano Garzarella]

Some devices may require a higher limit for the number of IOTLB
entries, so let's make it configurable through a module parameter.

By default, it's initialized with the current limit (2048).

Suggested-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: Stefano Garzarella <sgarzare@redhat.com>
---
 drivers/vdpa/vdpa_sim/vdpa_sim.c | 7 ++++++-
 1 file changed, 6 insertions(+), 1 deletion(-)

diff --git a/drivers/vdpa/vdpa_sim/vdpa_sim.c b/drivers/vdpa/vdpa_sim/vdpa_sim.c
index 07ccc8609784..d716bfaadb3b 100644
--- a/drivers/vdpa/vdpa_sim/vdpa_sim.c
+++ b/drivers/vdpa/vdpa_sim/vdpa_sim.c
@@ -31,6 +31,11 @@ static int batch_mapping = 1;
 module_param(batch_mapping, int, 0444);
 MODULE_PARM_DESC(batch_mapping, "Batched mapping 1 -Enable; 0 - Disable");
 
+static int max_iotlb_entries = 2048;
+module_param(max_iotlb_entries, int, 0444);
+MODULE_PARM_DESC(max_iotlb_entries,
+		 "Maximum number of iotlb entries. 0 means unlimited. (default: 2048)");
+
 static char *macaddr;
 module_param(macaddr, charp, 0);
 MODULE_PARM_DESC(macaddr, "Ethernet MAC address");
@@ -371,7 +376,7 @@ static struct vdpasim *vdpasim_create(void)
 	if (!vdpasim->vqs)
 		goto err_iommu;
 
-	vdpasim->iommu = vhost_iotlb_alloc(2048, 0);
+	vdpasim->iommu = vhost_iotlb_alloc(max_iotlb_entries, 0);
 	if (!vdpasim->iommu)
 		goto err_iommu;
 
-- 
2.26.2

_______________________________________________
Virtualization mailing list
Virtualization@lists.linux-foundation.org
https://lists.linuxfoundation.org/mailman/listinfo/virtualization

Re: [PATCH v4 04/18] vdpa_sim: make IOTLB entries limit configurable

[Jason Wang]

On 2020/12/15 下午10:42, Stefano Garzarella wrote:
> Some devices may require a higher limit for the number of IOTLB
> entries, so let's make it configurable through a module parameter.
>
> By default, it's initialized with the current limit (2048).
>
> Suggested-by: Jason Wang <jasowang@redhat.com>
> Signed-off-by: Stefano Garzarella <sgarzare@redhat.com>


Acked-by: Jason Wang <jasowang@redhat.com>


> ---
>   drivers/vdpa/vdpa_sim/vdpa_sim.c | 7 ++++++-
>   1 file changed, 6 insertions(+), 1 deletion(-)
>
> diff --git a/drivers/vdpa/vdpa_sim/vdpa_sim.c b/drivers/vdpa/vdpa_sim/vdpa_sim.c
> index 07ccc8609784..d716bfaadb3b 100644
> --- a/drivers/vdpa/vdpa_sim/vdpa_sim.c
> +++ b/drivers/vdpa/vdpa_sim/vdpa_sim.c
> @@ -31,6 +31,11 @@ static int batch_mapping = 1;
>   module_param(batch_mapping, int, 0444);
>   MODULE_PARM_DESC(batch_mapping, "Batched mapping 1 -Enable; 0 - Disable");
>   
> +static int max_iotlb_entries = 2048;
> +module_param(max_iotlb_entries, int, 0444);
> +MODULE_PARM_DESC(max_iotlb_entries,
> +		 "Maximum number of iotlb entries. 0 means unlimited. (default: 2048)");
> +
>   static char *macaddr;
>   module_param(macaddr, charp, 0);
>   MODULE_PARM_DESC(macaddr, "Ethernet MAC address");
> @@ -371,7 +376,7 @@ static struct vdpasim *vdpasim_create(void)
>   	if (!vdpasim->vqs)
>   		goto err_iommu;
>   
> -	vdpasim->iommu = vhost_iotlb_alloc(2048, 0);
> +	vdpasim->iommu = vhost_iotlb_alloc(max_iotlb_entries, 0);
>   	if (!vdpasim->iommu)
>   		goto err_iommu;
>   

Re: [PATCH v4 04/18] vdpa_sim: make IOTLB entries limit configurable

[Jason Wang]

On 2020/12/15 下午10:42, Stefano Garzarella wrote:
> Some devices may require a higher limit for the number of IOTLB
> entries, so let's make it configurable through a module parameter.
>
> By default, it's initialized with the current limit (2048).
>
> Suggested-by: Jason Wang <jasowang@redhat.com>
> Signed-off-by: Stefano Garzarella <sgarzare@redhat.com>


Acked-by: Jason Wang <jasowang@redhat.com>


> ---
>   drivers/vdpa/vdpa_sim/vdpa_sim.c | 7 ++++++-
>   1 file changed, 6 insertions(+), 1 deletion(-)
>
> diff --git a/drivers/vdpa/vdpa_sim/vdpa_sim.c b/drivers/vdpa/vdpa_sim/vdpa_sim.c
> index 07ccc8609784..d716bfaadb3b 100644
> --- a/drivers/vdpa/vdpa_sim/vdpa_sim.c
> +++ b/drivers/vdpa/vdpa_sim/vdpa_sim.c
> @@ -31,6 +31,11 @@ static int batch_mapping = 1;
>   module_param(batch_mapping, int, 0444);
>   MODULE_PARM_DESC(batch_mapping, "Batched mapping 1 -Enable; 0 - Disable");
>   
> +static int max_iotlb_entries = 2048;
> +module_param(max_iotlb_entries, int, 0444);
> +MODULE_PARM_DESC(max_iotlb_entries,
> +		 "Maximum number of iotlb entries. 0 means unlimited. (default: 2048)");
> +
>   static char *macaddr;
>   module_param(macaddr, charp, 0);
>   MODULE_PARM_DESC(macaddr, "Ethernet MAC address");
> @@ -371,7 +376,7 @@ static struct vdpasim *vdpasim_create(void)
>   	if (!vdpasim->vqs)
>   		goto err_iommu;
>   
> -	vdpasim->iommu = vhost_iotlb_alloc(2048, 0);
> +	vdpasim->iommu = vhost_iotlb_alloc(max_iotlb_entries, 0);
>   	if (!vdpasim->iommu)
>   		goto err_iommu;
>   

_______________________________________________
Virtualization mailing list
Virtualization@lists.linux-foundation.org
https://lists.linuxfoundation.org/mailman/listinfo/virtualization

[PATCH v4 05/18] vdpa_sim: rename vdpasim_config_ops variables

[Stefano Garzarella]

These variables store generic callbacks used by the vDPA simulator
core, so we can remove the 'net' word in their names.

Co-developed-by: Max Gurtovoy <mgurtovoy@nvidia.com>
Signed-off-by: Max Gurtovoy <mgurtovoy@nvidia.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: Stefano Garzarella <sgarzare@redhat.com>
---
 drivers/vdpa/vdpa_sim/vdpa_sim.c | 12 ++++++------
 1 file changed, 6 insertions(+), 6 deletions(-)

diff --git a/drivers/vdpa/vdpa_sim/vdpa_sim.c b/drivers/vdpa/vdpa_sim/vdpa_sim.c
index d716bfaadb3b..923f29076b1b 100644
--- a/drivers/vdpa/vdpa_sim/vdpa_sim.c
+++ b/drivers/vdpa/vdpa_sim/vdpa_sim.c
@@ -341,8 +341,8 @@ static const struct dma_map_ops vdpasim_dma_ops = {
 	.free = vdpasim_free_coherent,
 };
 
-static const struct vdpa_config_ops vdpasim_net_config_ops;
-static const struct vdpa_config_ops vdpasim_net_batch_config_ops;
+static const struct vdpa_config_ops vdpasim_config_ops;
+static const struct vdpa_config_ops vdpasim_batch_config_ops;
 
 static struct vdpasim *vdpasim_create(void)
 {
@@ -352,9 +352,9 @@ static struct vdpasim *vdpasim_create(void)
 	int i, ret = -ENOMEM;
 
 	if (batch_mapping)
-		ops = &vdpasim_net_batch_config_ops;
+		ops = &vdpasim_batch_config_ops;
 	else
-		ops = &vdpasim_net_config_ops;
+		ops = &vdpasim_config_ops;
 
 	vdpasim = vdpa_alloc_device(struct vdpasim, vdpa, NULL, ops, VDPASIM_VQ_NUM);
 	if (!vdpasim)
@@ -667,7 +667,7 @@ static void vdpasim_free(struct vdpa_device *vdpa)
 	kfree(vdpasim->vqs);
 }
 
-static const struct vdpa_config_ops vdpasim_net_config_ops = {
+static const struct vdpa_config_ops vdpasim_config_ops = {
 	.set_vq_address         = vdpasim_set_vq_address,
 	.set_vq_num             = vdpasim_set_vq_num,
 	.kick_vq                = vdpasim_kick_vq,
@@ -694,7 +694,7 @@ static const struct vdpa_config_ops vdpasim_net_config_ops = {
 	.free                   = vdpasim_free,
 };
 
-static const struct vdpa_config_ops vdpasim_net_batch_config_ops = {
+static const struct vdpa_config_ops vdpasim_batch_config_ops = {
 	.set_vq_address         = vdpasim_set_vq_address,
 	.set_vq_num             = vdpasim_set_vq_num,
 	.kick_vq                = vdpasim_kick_vq,
-- 
2.26.2

[PATCH v4 05/18] vdpa_sim: rename vdpasim_config_ops variables

[Stefano Garzarella]

These variables store generic callbacks used by the vDPA simulator
core, so we can remove the 'net' word in their names.

Co-developed-by: Max Gurtovoy <mgurtovoy@nvidia.com>
Signed-off-by: Max Gurtovoy <mgurtovoy@nvidia.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: Stefano Garzarella <sgarzare@redhat.com>
---
 drivers/vdpa/vdpa_sim/vdpa_sim.c | 12 ++++++------
 1 file changed, 6 insertions(+), 6 deletions(-)

diff --git a/drivers/vdpa/vdpa_sim/vdpa_sim.c b/drivers/vdpa/vdpa_sim/vdpa_sim.c
index d716bfaadb3b..923f29076b1b 100644
--- a/drivers/vdpa/vdpa_sim/vdpa_sim.c
+++ b/drivers/vdpa/vdpa_sim/vdpa_sim.c
@@ -341,8 +341,8 @@ static const struct dma_map_ops vdpasim_dma_ops = {
 	.free = vdpasim_free_coherent,
 };
 
-static const struct vdpa_config_ops vdpasim_net_config_ops;
-static const struct vdpa_config_ops vdpasim_net_batch_config_ops;
+static const struct vdpa_config_ops vdpasim_config_ops;
+static const struct vdpa_config_ops vdpasim_batch_config_ops;
 
 static struct vdpasim *vdpasim_create(void)
 {
@@ -352,9 +352,9 @@ static struct vdpasim *vdpasim_create(void)
 	int i, ret = -ENOMEM;
 
 	if (batch_mapping)
-		ops = &vdpasim_net_batch_config_ops;
+		ops = &vdpasim_batch_config_ops;
 	else
-		ops = &vdpasim_net_config_ops;
+		ops = &vdpasim_config_ops;
 
 	vdpasim = vdpa_alloc_device(struct vdpasim, vdpa, NULL, ops, VDPASIM_VQ_NUM);
 	if (!vdpasim)
@@ -667,7 +667,7 @@ static void vdpasim_free(struct vdpa_device *vdpa)
 	kfree(vdpasim->vqs);
 }
 
-static const struct vdpa_config_ops vdpasim_net_config_ops = {
+static const struct vdpa_config_ops vdpasim_config_ops = {
 	.set_vq_address         = vdpasim_set_vq_address,
 	.set_vq_num             = vdpasim_set_vq_num,
 	.kick_vq                = vdpasim_kick_vq,
@@ -694,7 +694,7 @@ static const struct vdpa_config_ops vdpasim_net_config_ops = {
 	.free                   = vdpasim_free,
 };
 
-static const struct vdpa_config_ops vdpasim_net_batch_config_ops = {
+static const struct vdpa_config_ops vdpasim_batch_config_ops = {
 	.set_vq_address         = vdpasim_set_vq_address,
 	.set_vq_num             = vdpasim_set_vq_num,
 	.kick_vq                = vdpasim_kick_vq,
-- 
2.26.2

_______________________________________________
Virtualization mailing list
Virtualization@lists.linux-foundation.org
https://lists.linuxfoundation.org/mailman/listinfo/virtualization

[PATCH v4 06/18] vdpa_sim: add struct vdpasim_dev_attr for device attributes

[Stefano Garzarella]

vdpasim_dev_attr will contain device specific attributes. We starting
moving the number of virtqueues (i.e. nvqs) to vdpasim_dev_attr.

vdpasim_create() creates a new vDPA simulator following the device
attributes defined in the vdpasim_dev_attr parameter.

Co-developed-by: Max Gurtovoy <mgurtovoy@nvidia.com>
Signed-off-by: Max Gurtovoy <mgurtovoy@nvidia.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: Stefano Garzarella <sgarzare@redhat.com>
---
 drivers/vdpa/vdpa_sim/vdpa_sim.c | 25 +++++++++++++++++--------
 1 file changed, 17 insertions(+), 8 deletions(-)

diff --git a/drivers/vdpa/vdpa_sim/vdpa_sim.c b/drivers/vdpa/vdpa_sim/vdpa_sim.c
index 923f29076b1b..ae295dc57d7d 100644
--- a/drivers/vdpa/vdpa_sim/vdpa_sim.c
+++ b/drivers/vdpa/vdpa_sim/vdpa_sim.c
@@ -65,11 +65,16 @@ static u64 vdpasim_features = (1ULL << VIRTIO_F_ANY_LAYOUT) |
 			      (1ULL << VIRTIO_F_ACCESS_PLATFORM) |
 			      (1ULL << VIRTIO_NET_F_MAC);
 
+struct vdpasim_dev_attr {
+	int nvqs;
+};
+
 /* State of each vdpasim device */
 struct vdpasim {
 	struct vdpa_device vdpa;
 	struct vdpasim_virtqueue *vqs;
 	struct work_struct work;
+	struct vdpasim_dev_attr dev_attr;
 	/* spinlock to synchronize virtqueue state */
 	spinlock_t lock;
 	struct virtio_net_config config;
@@ -78,7 +83,6 @@ struct vdpasim {
 	u32 status;
 	u32 generation;
 	u64 features;
-	int nvqs;
 	/* spinlock to synchronize iommu table */
 	spinlock_t iommu_lock;
 };
@@ -143,7 +147,7 @@ static void vdpasim_reset(struct vdpasim *vdpasim)
 {
 	int i;
 
-	for (i = 0; i < vdpasim->nvqs; i++)
+	for (i = 0; i < vdpasim->dev_attr.nvqs; i++)
 		vdpasim_vq_reset(&vdpasim->vqs[i]);
 
 	spin_lock(&vdpasim->iommu_lock);
@@ -344,7 +348,7 @@ static const struct dma_map_ops vdpasim_dma_ops = {
 static const struct vdpa_config_ops vdpasim_config_ops;
 static const struct vdpa_config_ops vdpasim_batch_config_ops;
 
-static struct vdpasim *vdpasim_create(void)
+static struct vdpasim *vdpasim_create(struct vdpasim_dev_attr *dev_attr)
 {
 	const struct vdpa_config_ops *ops;
 	struct vdpasim *vdpasim;
@@ -356,11 +360,12 @@ static struct vdpasim *vdpasim_create(void)
 	else
 		ops = &vdpasim_config_ops;
 
-	vdpasim = vdpa_alloc_device(struct vdpasim, vdpa, NULL, ops, VDPASIM_VQ_NUM);
+	vdpasim = vdpa_alloc_device(struct vdpasim, vdpa, NULL, ops,
+				    dev_attr->nvqs);
 	if (!vdpasim)
 		goto err_alloc;
 
-	vdpasim->nvqs = VDPASIM_VQ_NUM;
+	vdpasim->dev_attr = *dev_attr;
 	INIT_WORK(&vdpasim->work, vdpasim_work);
 	spin_lock_init(&vdpasim->lock);
 	spin_lock_init(&vdpasim->iommu_lock);
@@ -371,7 +376,7 @@ static struct vdpasim *vdpasim_create(void)
 		goto err_iommu;
 	set_dma_ops(dev, &vdpasim_dma_ops);
 
-	vdpasim->vqs = kcalloc(vdpasim->nvqs, sizeof(struct vdpasim_virtqueue),
+	vdpasim->vqs = kcalloc(dev_attr->nvqs, sizeof(struct vdpasim_virtqueue),
 			       GFP_KERNEL);
 	if (!vdpasim->vqs)
 		goto err_iommu;
@@ -394,7 +399,7 @@ static struct vdpasim *vdpasim_create(void)
 		eth_random_addr(vdpasim->config.mac);
 	}
 
-	for (i = 0; i < vdpasim->nvqs; i++)
+	for (i = 0; i < dev_attr->nvqs; i++)
 		vringh_set_iotlb(&vdpasim->vqs[i].vring, vdpasim->iommu);
 
 	vdpasim->vdpa.dma_dev = dev;
@@ -722,7 +727,11 @@ static const struct vdpa_config_ops vdpasim_batch_config_ops = {
 
 static int __init vdpasim_dev_init(void)
 {
-	vdpasim_dev = vdpasim_create();
+	struct vdpasim_dev_attr dev_attr = {};
+
+	dev_attr.nvqs = VDPASIM_VQ_NUM;
+
+	vdpasim_dev = vdpasim_create(&dev_attr);
 
 	if (!IS_ERR(vdpasim_dev))
 		return 0;
-- 
2.26.2

[PATCH v4 06/18] vdpa_sim: add struct vdpasim_dev_attr for device attributes

[Stefano Garzarella]

vdpasim_dev_attr will contain device specific attributes. We starting
moving the number of virtqueues (i.e. nvqs) to vdpasim_dev_attr.

vdpasim_create() creates a new vDPA simulator following the device
attributes defined in the vdpasim_dev_attr parameter.

Co-developed-by: Max Gurtovoy <mgurtovoy@nvidia.com>
Signed-off-by: Max Gurtovoy <mgurtovoy@nvidia.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: Stefano Garzarella <sgarzare@redhat.com>
---
 drivers/vdpa/vdpa_sim/vdpa_sim.c | 25 +++++++++++++++++--------
 1 file changed, 17 insertions(+), 8 deletions(-)

diff --git a/drivers/vdpa/vdpa_sim/vdpa_sim.c b/drivers/vdpa/vdpa_sim/vdpa_sim.c
index 923f29076b1b..ae295dc57d7d 100644
--- a/drivers/vdpa/vdpa_sim/vdpa_sim.c
+++ b/drivers/vdpa/vdpa_sim/vdpa_sim.c
@@ -65,11 +65,16 @@ static u64 vdpasim_features = (1ULL << VIRTIO_F_ANY_LAYOUT) |
 			      (1ULL << VIRTIO_F_ACCESS_PLATFORM) |
 			      (1ULL << VIRTIO_NET_F_MAC);
 
+struct vdpasim_dev_attr {
+	int nvqs;
+};
+
 /* State of each vdpasim device */
 struct vdpasim {
 	struct vdpa_device vdpa;
 	struct vdpasim_virtqueue *vqs;
 	struct work_struct work;
+	struct vdpasim_dev_attr dev_attr;
 	/* spinlock to synchronize virtqueue state */
 	spinlock_t lock;
 	struct virtio_net_config config;
@@ -78,7 +83,6 @@ struct vdpasim {
 	u32 status;
 	u32 generation;
 	u64 features;
-	int nvqs;
 	/* spinlock to synchronize iommu table */
 	spinlock_t iommu_lock;
 };
@@ -143,7 +147,7 @@ static void vdpasim_reset(struct vdpasim *vdpasim)
 {
 	int i;
 
-	for (i = 0; i < vdpasim->nvqs; i++)
+	for (i = 0; i < vdpasim->dev_attr.nvqs; i++)
 		vdpasim_vq_reset(&vdpasim->vqs[i]);
 
 	spin_lock(&vdpasim->iommu_lock);
@@ -344,7 +348,7 @@ static const struct dma_map_ops vdpasim_dma_ops = {
 static const struct vdpa_config_ops vdpasim_config_ops;
 static const struct vdpa_config_ops vdpasim_batch_config_ops;
 
-static struct vdpasim *vdpasim_create(void)
+static struct vdpasim *vdpasim_create(struct vdpasim_dev_attr *dev_attr)
 {
 	const struct vdpa_config_ops *ops;
 	struct vdpasim *vdpasim;
@@ -356,11 +360,12 @@ static struct vdpasim *vdpasim_create(void)
 	else
 		ops = &vdpasim_config_ops;
 
-	vdpasim = vdpa_alloc_device(struct vdpasim, vdpa, NULL, ops, VDPASIM_VQ_NUM);
+	vdpasim = vdpa_alloc_device(struct vdpasim, vdpa, NULL, ops,
+				    dev_attr->nvqs);
 	if (!vdpasim)
 		goto err_alloc;
 
-	vdpasim->nvqs = VDPASIM_VQ_NUM;
+	vdpasim->dev_attr = *dev_attr;
 	INIT_WORK(&vdpasim->work, vdpasim_work);
 	spin_lock_init(&vdpasim->lock);
 	spin_lock_init(&vdpasim->iommu_lock);
@@ -371,7 +376,7 @@ static struct vdpasim *vdpasim_create(void)
 		goto err_iommu;
 	set_dma_ops(dev, &vdpasim_dma_ops);
 
-	vdpasim->vqs = kcalloc(vdpasim->nvqs, sizeof(struct vdpasim_virtqueue),
+	vdpasim->vqs = kcalloc(dev_attr->nvqs, sizeof(struct vdpasim_virtqueue),
 			       GFP_KERNEL);
 	if (!vdpasim->vqs)
 		goto err_iommu;
@@ -394,7 +399,7 @@ static struct vdpasim *vdpasim_create(void)
 		eth_random_addr(vdpasim->config.mac);
 	}
 
-	for (i = 0; i < vdpasim->nvqs; i++)
+	for (i = 0; i < dev_attr->nvqs; i++)
 		vringh_set_iotlb(&vdpasim->vqs[i].vring, vdpasim->iommu);
 
 	vdpasim->vdpa.dma_dev = dev;
@@ -722,7 +727,11 @@ static const struct vdpa_config_ops vdpasim_batch_config_ops = {
 
 static int __init vdpasim_dev_init(void)
 {
-	vdpasim_dev = vdpasim_create();
+	struct vdpasim_dev_attr dev_attr = {};
+
+	dev_attr.nvqs = VDPASIM_VQ_NUM;
+
+	vdpasim_dev = vdpasim_create(&dev_attr);
 
 	if (!IS_ERR(vdpasim_dev))
 		return 0;
-- 
2.26.2

_______________________________________________
Virtualization mailing list
Virtualization@lists.linux-foundation.org
https://lists.linuxfoundation.org/mailman/listinfo/virtualization

[PATCH v4 07/18] vdpa_sim: add device id field in vdpasim_dev_attr

[Stefano Garzarella]

Remove VDPASIM_DEVICE_ID macro and add 'id' field in vdpasim_dev_attr,
that will be returned by vdpasim_get_device_id().

Use VIRTIO_ID_NET for vDPA-net simulator device id.

Co-developed-by: Max Gurtovoy <mgurtovoy@nvidia.com>
Signed-off-by: Max Gurtovoy <mgurtovoy@nvidia.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: Stefano Garzarella <sgarzare@redhat.com>
---
 drivers/vdpa/vdpa_sim/vdpa_sim.c | 7 +++++--
 1 file changed, 5 insertions(+), 2 deletions(-)

diff --git a/drivers/vdpa/vdpa_sim/vdpa_sim.c b/drivers/vdpa/vdpa_sim/vdpa_sim.c
index ae295dc57d7d..3a8e57ac7762 100644
--- a/drivers/vdpa/vdpa_sim/vdpa_sim.c
+++ b/drivers/vdpa/vdpa_sim/vdpa_sim.c
@@ -55,7 +55,6 @@ struct vdpasim_virtqueue {
 
 #define VDPASIM_QUEUE_ALIGN PAGE_SIZE
 #define VDPASIM_QUEUE_MAX 256
-#define VDPASIM_DEVICE_ID 0x1
 #define VDPASIM_VENDOR_ID 0
 #define VDPASIM_VQ_NUM 0x2
 #define VDPASIM_NAME "vdpasim-netdev"
@@ -67,6 +66,7 @@ static u64 vdpasim_features = (1ULL << VIRTIO_F_ANY_LAYOUT) |
 
 struct vdpasim_dev_attr {
 	int nvqs;
+	u32 id;
 };
 
 /* State of each vdpasim device */
@@ -546,7 +546,9 @@ static u16 vdpasim_get_vq_num_max(struct vdpa_device *vdpa)
 
 static u32 vdpasim_get_device_id(struct vdpa_device *vdpa)
 {
-	return VDPASIM_DEVICE_ID;
+	struct vdpasim *vdpasim = vdpa_to_sim(vdpa);
+
+	return vdpasim->dev_attr.id;
 }
 
 static u32 vdpasim_get_vendor_id(struct vdpa_device *vdpa)
@@ -729,6 +731,7 @@ static int __init vdpasim_dev_init(void)
 {
 	struct vdpasim_dev_attr dev_attr = {};
 
+	dev_attr.id = VIRTIO_ID_NET;
 	dev_attr.nvqs = VDPASIM_VQ_NUM;
 
 	vdpasim_dev = vdpasim_create(&dev_attr);
-- 
2.26.2

[PATCH v4 07/18] vdpa_sim: add device id field in vdpasim_dev_attr

[Stefano Garzarella]

Remove VDPASIM_DEVICE_ID macro and add 'id' field in vdpasim_dev_attr,
that will be returned by vdpasim_get_device_id().

Use VIRTIO_ID_NET for vDPA-net simulator device id.

Co-developed-by: Max Gurtovoy <mgurtovoy@nvidia.com>
Signed-off-by: Max Gurtovoy <mgurtovoy@nvidia.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: Stefano Garzarella <sgarzare@redhat.com>
---
 drivers/vdpa/vdpa_sim/vdpa_sim.c | 7 +++++--
 1 file changed, 5 insertions(+), 2 deletions(-)

diff --git a/drivers/vdpa/vdpa_sim/vdpa_sim.c b/drivers/vdpa/vdpa_sim/vdpa_sim.c
index ae295dc57d7d..3a8e57ac7762 100644
--- a/drivers/vdpa/vdpa_sim/vdpa_sim.c
+++ b/drivers/vdpa/vdpa_sim/vdpa_sim.c
@@ -55,7 +55,6 @@ struct vdpasim_virtqueue {
 
 #define VDPASIM_QUEUE_ALIGN PAGE_SIZE
 #define VDPASIM_QUEUE_MAX 256
-#define VDPASIM_DEVICE_ID 0x1
 #define VDPASIM_VENDOR_ID 0
 #define VDPASIM_VQ_NUM 0x2
 #define VDPASIM_NAME "vdpasim-netdev"
@@ -67,6 +66,7 @@ static u64 vdpasim_features = (1ULL << VIRTIO_F_ANY_LAYOUT) |
 
 struct vdpasim_dev_attr {
 	int nvqs;
+	u32 id;
 };
 
 /* State of each vdpasim device */
@@ -546,7 +546,9 @@ static u16 vdpasim_get_vq_num_max(struct vdpa_device *vdpa)
 
 static u32 vdpasim_get_device_id(struct vdpa_device *vdpa)
 {
-	return VDPASIM_DEVICE_ID;
+	struct vdpasim *vdpasim = vdpa_to_sim(vdpa);
+
+	return vdpasim->dev_attr.id;
 }
 
 static u32 vdpasim_get_vendor_id(struct vdpa_device *vdpa)
@@ -729,6 +731,7 @@ static int __init vdpasim_dev_init(void)
 {
 	struct vdpasim_dev_attr dev_attr = {};
 
+	dev_attr.id = VIRTIO_ID_NET;
 	dev_attr.nvqs = VDPASIM_VQ_NUM;
 
 	vdpasim_dev = vdpasim_create(&dev_attr);
-- 
2.26.2

_______________________________________________
Virtualization mailing list
Virtualization@lists.linux-foundation.org
https://lists.linuxfoundation.org/mailman/listinfo/virtualization

[PATCH v4 08/18] vdpa_sim: add supported_features field in vdpasim_dev_attr

[Stefano Garzarella]

Introduce a new VDPASIM_FEATURES macro with the generic features
supported by the vDPA simulator, and VDPASIM_NET_FEATURES macro with
vDPA-net features.

Add 'supported_features' field in vdpasim_dev_attr, to allow devices
to specify their features.

Co-developed-by: Max Gurtovoy <mgurtovoy@nvidia.com>
Signed-off-by: Max Gurtovoy <mgurtovoy@nvidia.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: Stefano Garzarella <sgarzare@redhat.com>
---
 drivers/vdpa/vdpa_sim/vdpa_sim.c | 29 ++++++++++++++++++-----------
 1 file changed, 18 insertions(+), 11 deletions(-)

diff --git a/drivers/vdpa/vdpa_sim/vdpa_sim.c b/drivers/vdpa/vdpa_sim/vdpa_sim.c
index 3a8e57ac7762..6cf3c78b0e33 100644
--- a/drivers/vdpa/vdpa_sim/vdpa_sim.c
+++ b/drivers/vdpa/vdpa_sim/vdpa_sim.c
@@ -59,12 +59,15 @@ struct vdpasim_virtqueue {
 #define VDPASIM_VQ_NUM 0x2
 #define VDPASIM_NAME "vdpasim-netdev"
 
-static u64 vdpasim_features = (1ULL << VIRTIO_F_ANY_LAYOUT) |
-			      (1ULL << VIRTIO_F_VERSION_1)  |
-			      (1ULL << VIRTIO_F_ACCESS_PLATFORM) |
-			      (1ULL << VIRTIO_NET_F_MAC);
+#define VDPASIM_FEATURES	((1ULL << VIRTIO_F_ANY_LAYOUT) | \
+				 (1ULL << VIRTIO_F_VERSION_1)  | \
+				 (1ULL << VIRTIO_F_ACCESS_PLATFORM))
+
+#define VDPASIM_NET_FEATURES	(VDPASIM_FEATURES | \
+				 (1ULL << VIRTIO_NET_F_MAC))
 
 struct vdpasim_dev_attr {
+	u64 supported_features;
 	int nvqs;
 	u32 id;
 };
@@ -122,7 +125,7 @@ static void vdpasim_queue_ready(struct vdpasim *vdpasim, unsigned int idx)
 {
 	struct vdpasim_virtqueue *vq = &vdpasim->vqs[idx];
 
-	vringh_init_iotlb(&vq->vring, vdpasim_features,
+	vringh_init_iotlb(&vq->vring, vdpasim->dev_attr.supported_features,
 			  VDPASIM_QUEUE_MAX, false,
 			  (struct vring_desc *)(uintptr_t)vq->desc_addr,
 			  (struct vring_avail *)
@@ -131,7 +134,8 @@ static void vdpasim_queue_ready(struct vdpasim *vdpasim, unsigned int idx)
 			  (uintptr_t)vq->device_addr);
 }
 
-static void vdpasim_vq_reset(struct vdpasim_virtqueue *vq)
+static void vdpasim_vq_reset(struct vdpasim *vdpasim,
+			     struct vdpasim_virtqueue *vq)
 {
 	vq->ready = false;
 	vq->desc_addr = 0;
@@ -139,8 +143,8 @@ static void vdpasim_vq_reset(struct vdpasim_virtqueue *vq)
 	vq->device_addr = 0;
 	vq->cb = NULL;
 	vq->private = NULL;
-	vringh_init_iotlb(&vq->vring, vdpasim_features, VDPASIM_QUEUE_MAX,
-			  false, NULL, NULL, NULL);
+	vringh_init_iotlb(&vq->vring, vdpasim->dev_attr.supported_features,
+			  VDPASIM_QUEUE_MAX, false, NULL, NULL, NULL);
 }
 
 static void vdpasim_reset(struct vdpasim *vdpasim)
@@ -148,7 +152,7 @@ static void vdpasim_reset(struct vdpasim *vdpasim)
 	int i;
 
 	for (i = 0; i < vdpasim->dev_attr.nvqs; i++)
-		vdpasim_vq_reset(&vdpasim->vqs[i]);
+		vdpasim_vq_reset(vdpasim, &vdpasim->vqs[i]);
 
 	spin_lock(&vdpasim->iommu_lock);
 	vhost_iotlb_reset(vdpasim->iommu);
@@ -508,7 +512,9 @@ static u32 vdpasim_get_vq_align(struct vdpa_device *vdpa)
 
 static u64 vdpasim_get_features(struct vdpa_device *vdpa)
 {
-	return vdpasim_features;
+	struct vdpasim *vdpasim = vdpa_to_sim(vdpa);
+
+	return vdpasim->dev_attr.supported_features;
 }
 
 static int vdpasim_set_features(struct vdpa_device *vdpa, u64 features)
@@ -520,7 +526,7 @@ static int vdpasim_set_features(struct vdpa_device *vdpa, u64 features)
 	if (!(features & (1ULL << VIRTIO_F_ACCESS_PLATFORM)))
 		return -EINVAL;
 
-	vdpasim->features = features & vdpasim_features;
+	vdpasim->features = features & vdpasim->dev_attr.supported_features;
 
 	/* We generally only know whether guest is using the legacy interface
 	 * here, so generally that's the earliest we can set config fields.
@@ -732,6 +738,7 @@ static int __init vdpasim_dev_init(void)
 	struct vdpasim_dev_attr dev_attr = {};
 
 	dev_attr.id = VIRTIO_ID_NET;
+	dev_attr.supported_features = VDPASIM_NET_FEATURES;
 	dev_attr.nvqs = VDPASIM_VQ_NUM;
 
 	vdpasim_dev = vdpasim_create(&dev_attr);
-- 
2.26.2

[PATCH v4 08/18] vdpa_sim: add supported_features field in vdpasim_dev_attr

[Stefano Garzarella]

Introduce a new VDPASIM_FEATURES macro with the generic features
supported by the vDPA simulator, and VDPASIM_NET_FEATURES macro with
vDPA-net features.

Add 'supported_features' field in vdpasim_dev_attr, to allow devices
to specify their features.

Co-developed-by: Max Gurtovoy <mgurtovoy@nvidia.com>
Signed-off-by: Max Gurtovoy <mgurtovoy@nvidia.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: Stefano Garzarella <sgarzare@redhat.com>
---
 drivers/vdpa/vdpa_sim/vdpa_sim.c | 29 ++++++++++++++++++-----------
 1 file changed, 18 insertions(+), 11 deletions(-)

diff --git a/drivers/vdpa/vdpa_sim/vdpa_sim.c b/drivers/vdpa/vdpa_sim/vdpa_sim.c
index 3a8e57ac7762..6cf3c78b0e33 100644
--- a/drivers/vdpa/vdpa_sim/vdpa_sim.c
+++ b/drivers/vdpa/vdpa_sim/vdpa_sim.c
@@ -59,12 +59,15 @@ struct vdpasim_virtqueue {
 #define VDPASIM_VQ_NUM 0x2
 #define VDPASIM_NAME "vdpasim-netdev"
 
-static u64 vdpasim_features = (1ULL << VIRTIO_F_ANY_LAYOUT) |
-			      (1ULL << VIRTIO_F_VERSION_1)  |
-			      (1ULL << VIRTIO_F_ACCESS_PLATFORM) |
-			      (1ULL << VIRTIO_NET_F_MAC);
+#define VDPASIM_FEATURES	((1ULL << VIRTIO_F_ANY_LAYOUT) | \
+				 (1ULL << VIRTIO_F_VERSION_1)  | \
+				 (1ULL << VIRTIO_F_ACCESS_PLATFORM))
+
+#define VDPASIM_NET_FEATURES	(VDPASIM_FEATURES | \
+				 (1ULL << VIRTIO_NET_F_MAC))
 
 struct vdpasim_dev_attr {
+	u64 supported_features;
 	int nvqs;
 	u32 id;
 };
@@ -122,7 +125,7 @@ static void vdpasim_queue_ready(struct vdpasim *vdpasim, unsigned int idx)
 {
 	struct vdpasim_virtqueue *vq = &vdpasim->vqs[idx];
 
-	vringh_init_iotlb(&vq->vring, vdpasim_features,
+	vringh_init_iotlb(&vq->vring, vdpasim->dev_attr.supported_features,
 			  VDPASIM_QUEUE_MAX, false,
 			  (struct vring_desc *)(uintptr_t)vq->desc_addr,
 			  (struct vring_avail *)
@@ -131,7 +134,8 @@ static void vdpasim_queue_ready(struct vdpasim *vdpasim, unsigned int idx)
 			  (uintptr_t)vq->device_addr);
 }
 
-static void vdpasim_vq_reset(struct vdpasim_virtqueue *vq)
+static void vdpasim_vq_reset(struct vdpasim *vdpasim,
+			     struct vdpasim_virtqueue *vq)
 {
 	vq->ready = false;
 	vq->desc_addr = 0;
@@ -139,8 +143,8 @@ static void vdpasim_vq_reset(struct vdpasim_virtqueue *vq)
 	vq->device_addr = 0;
 	vq->cb = NULL;
 	vq->private = NULL;
-	vringh_init_iotlb(&vq->vring, vdpasim_features, VDPASIM_QUEUE_MAX,
-			  false, NULL, NULL, NULL);
+	vringh_init_iotlb(&vq->vring, vdpasim->dev_attr.supported_features,
+			  VDPASIM_QUEUE_MAX, false, NULL, NULL, NULL);
 }
 
 static void vdpasim_reset(struct vdpasim *vdpasim)
@@ -148,7 +152,7 @@ static void vdpasim_reset(struct vdpasim *vdpasim)
 	int i;
 
 	for (i = 0; i < vdpasim->dev_attr.nvqs; i++)
-		vdpasim_vq_reset(&vdpasim->vqs[i]);
+		vdpasim_vq_reset(vdpasim, &vdpasim->vqs[i]);
 
 	spin_lock(&vdpasim->iommu_lock);
 	vhost_iotlb_reset(vdpasim->iommu);
@@ -508,7 +512,9 @@ static u32 vdpasim_get_vq_align(struct vdpa_device *vdpa)
 
 static u64 vdpasim_get_features(struct vdpa_device *vdpa)
 {
-	return vdpasim_features;
+	struct vdpasim *vdpasim = vdpa_to_sim(vdpa);
+
+	return vdpasim->dev_attr.supported_features;
 }
 
 static int vdpasim_set_features(struct vdpa_device *vdpa, u64 features)
@@ -520,7 +526,7 @@ static int vdpasim_set_features(struct vdpa_device *vdpa, u64 features)
 	if (!(features & (1ULL << VIRTIO_F_ACCESS_PLATFORM)))
 		return -EINVAL;
 
-	vdpasim->features = features & vdpasim_features;
+	vdpasim->features = features & vdpasim->dev_attr.supported_features;
 
 	/* We generally only know whether guest is using the legacy interface
 	 * here, so generally that's the earliest we can set config fields.
@@ -732,6 +738,7 @@ static int __init vdpasim_dev_init(void)
 	struct vdpasim_dev_attr dev_attr = {};
 
 	dev_attr.id = VIRTIO_ID_NET;
+	dev_attr.supported_features = VDPASIM_NET_FEATURES;
 	dev_attr.nvqs = VDPASIM_VQ_NUM;
 
 	vdpasim_dev = vdpasim_create(&dev_attr);
-- 
2.26.2

_______________________________________________
Virtualization mailing list
Virtualization@lists.linux-foundation.org
https://lists.linuxfoundation.org/mailman/listinfo/virtualization

[PATCH v4 09/18] vdpa_sim: add work_fn in vdpasim_dev_attr

[Stefano Garzarella]

Rename vdpasim_work() in vdpasim_net_work() and add it to
the vdpasim_dev_attr structure.

Co-developed-by: Max Gurtovoy <mgurtovoy@nvidia.com>
Signed-off-by: Max Gurtovoy <mgurtovoy@nvidia.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: Stefano Garzarella <sgarzare@redhat.com>
---
 drivers/vdpa/vdpa_sim/vdpa_sim.c | 7 +++++--
 1 file changed, 5 insertions(+), 2 deletions(-)

diff --git a/drivers/vdpa/vdpa_sim/vdpa_sim.c b/drivers/vdpa/vdpa_sim/vdpa_sim.c
index 6cf3c78b0e33..d356929f9dd3 100644
--- a/drivers/vdpa/vdpa_sim/vdpa_sim.c
+++ b/drivers/vdpa/vdpa_sim/vdpa_sim.c
@@ -70,6 +70,8 @@ struct vdpasim_dev_attr {
 	u64 supported_features;
 	int nvqs;
 	u32 id;
+
+	work_func_t work_fn;
 };
 
 /* State of each vdpasim device */
@@ -163,7 +165,7 @@ static void vdpasim_reset(struct vdpasim *vdpasim)
 	++vdpasim->generation;
 }
 
-static void vdpasim_work(struct work_struct *work)
+static void vdpasim_net_work(struct work_struct *work)
 {
 	struct vdpasim *vdpasim = container_of(work, struct
 						 vdpasim, work);
@@ -370,7 +372,7 @@ static struct vdpasim *vdpasim_create(struct vdpasim_dev_attr *dev_attr)
 		goto err_alloc;
 
 	vdpasim->dev_attr = *dev_attr;
-	INIT_WORK(&vdpasim->work, vdpasim_work);
+	INIT_WORK(&vdpasim->work, dev_attr->work_fn);
 	spin_lock_init(&vdpasim->lock);
 	spin_lock_init(&vdpasim->iommu_lock);
 
@@ -740,6 +742,7 @@ static int __init vdpasim_dev_init(void)
 	dev_attr.id = VIRTIO_ID_NET;
 	dev_attr.supported_features = VDPASIM_NET_FEATURES;
 	dev_attr.nvqs = VDPASIM_VQ_NUM;
+	dev_attr.work_fn = vdpasim_net_work;
 
 	vdpasim_dev = vdpasim_create(&dev_attr);
 
-- 
2.26.2

[PATCH v4 09/18] vdpa_sim: add work_fn in vdpasim_dev_attr

[Stefano Garzarella]

Rename vdpasim_work() in vdpasim_net_work() and add it to
the vdpasim_dev_attr structure.

Co-developed-by: Max Gurtovoy <mgurtovoy@nvidia.com>
Signed-off-by: Max Gurtovoy <mgurtovoy@nvidia.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: Stefano Garzarella <sgarzare@redhat.com>
---
 drivers/vdpa/vdpa_sim/vdpa_sim.c | 7 +++++--
 1 file changed, 5 insertions(+), 2 deletions(-)

diff --git a/drivers/vdpa/vdpa_sim/vdpa_sim.c b/drivers/vdpa/vdpa_sim/vdpa_sim.c
index 6cf3c78b0e33..d356929f9dd3 100644
--- a/drivers/vdpa/vdpa_sim/vdpa_sim.c
+++ b/drivers/vdpa/vdpa_sim/vdpa_sim.c
@@ -70,6 +70,8 @@ struct vdpasim_dev_attr {
 	u64 supported_features;
 	int nvqs;
 	u32 id;
+
+	work_func_t work_fn;
 };
 
 /* State of each vdpasim device */
@@ -163,7 +165,7 @@ static void vdpasim_reset(struct vdpasim *vdpasim)
 	++vdpasim->generation;
 }
 
-static void vdpasim_work(struct work_struct *work)
+static void vdpasim_net_work(struct work_struct *work)
 {
 	struct vdpasim *vdpasim = container_of(work, struct
 						 vdpasim, work);
@@ -370,7 +372,7 @@ static struct vdpasim *vdpasim_create(struct vdpasim_dev_attr *dev_attr)
 		goto err_alloc;
 
 	vdpasim->dev_attr = *dev_attr;
-	INIT_WORK(&vdpasim->work, vdpasim_work);
+	INIT_WORK(&vdpasim->work, dev_attr->work_fn);
 	spin_lock_init(&vdpasim->lock);
 	spin_lock_init(&vdpasim->iommu_lock);
 
@@ -740,6 +742,7 @@ static int __init vdpasim_dev_init(void)
 	dev_attr.id = VIRTIO_ID_NET;
 	dev_attr.supported_features = VDPASIM_NET_FEATURES;
 	dev_attr.nvqs = VDPASIM_VQ_NUM;
+	dev_attr.work_fn = vdpasim_net_work;
 
 	vdpasim_dev = vdpasim_create(&dev_attr);
 
-- 
2.26.2

_______________________________________________
Virtualization mailing list
Virtualization@lists.linux-foundation.org
https://lists.linuxfoundation.org/mailman/listinfo/virtualization

[PATCH v4 10/18] vdpa_sim: store parsed MAC address in a buffer

[Stefano Garzarella]

As preparation for the next patches, we store the MAC address,
parsed during the vdpasim_create(), in a buffer that will be used
to fill 'config' together with other configurations.

Acked-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: Stefano Garzarella <sgarzare@redhat.com>
---
 drivers/vdpa/vdpa_sim/vdpa_sim.c | 10 +++++++---
 1 file changed, 7 insertions(+), 3 deletions(-)

diff --git a/drivers/vdpa/vdpa_sim/vdpa_sim.c b/drivers/vdpa/vdpa_sim/vdpa_sim.c
index d356929f9dd3..ccb40501cbd7 100644
--- a/drivers/vdpa/vdpa_sim/vdpa_sim.c
+++ b/drivers/vdpa/vdpa_sim/vdpa_sim.c
@@ -40,6 +40,8 @@ static char *macaddr;
 module_param(macaddr, charp, 0);
 MODULE_PARM_DESC(macaddr, "Ethernet MAC address");
 
+u8 macaddr_buf[ETH_ALEN];
+
 struct vdpasim_virtqueue {
 	struct vringh vring;
 	struct vringh_kiov iov;
@@ -396,13 +398,13 @@ static struct vdpasim *vdpasim_create(struct vdpasim_dev_attr *dev_attr)
 		goto err_iommu;
 
 	if (macaddr) {
-		mac_pton(macaddr, vdpasim->config.mac);
-		if (!is_valid_ether_addr(vdpasim->config.mac)) {
+		mac_pton(macaddr, macaddr_buf);
+		if (!is_valid_ether_addr(macaddr_buf)) {
 			ret = -EADDRNOTAVAIL;
 			goto err_iommu;
 		}
 	} else {
-		eth_random_addr(vdpasim->config.mac);
+		eth_random_addr(macaddr_buf);
 	}
 
 	for (i = 0; i < dev_attr->nvqs; i++)
@@ -538,6 +540,8 @@ static int vdpasim_set_features(struct vdpa_device *vdpa, u64 features)
 
 	config->mtu = cpu_to_vdpasim16(vdpasim, 1500);
 	config->status = cpu_to_vdpasim16(vdpasim, VIRTIO_NET_S_LINK_UP);
+	memcpy(config->mac, macaddr_buf, ETH_ALEN);
+
 	return 0;
 }
 
-- 
2.26.2

[PATCH v4 10/18] vdpa_sim: store parsed MAC address in a buffer

[Stefano Garzarella]

As preparation for the next patches, we store the MAC address,
parsed during the vdpasim_create(), in a buffer that will be used
to fill 'config' together with other configurations.

Acked-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: Stefano Garzarella <sgarzare@redhat.com>
---
 drivers/vdpa/vdpa_sim/vdpa_sim.c | 10 +++++++---
 1 file changed, 7 insertions(+), 3 deletions(-)

diff --git a/drivers/vdpa/vdpa_sim/vdpa_sim.c b/drivers/vdpa/vdpa_sim/vdpa_sim.c
index d356929f9dd3..ccb40501cbd7 100644
--- a/drivers/vdpa/vdpa_sim/vdpa_sim.c
+++ b/drivers/vdpa/vdpa_sim/vdpa_sim.c
@@ -40,6 +40,8 @@ static char *macaddr;
 module_param(macaddr, charp, 0);
 MODULE_PARM_DESC(macaddr, "Ethernet MAC address");
 
+u8 macaddr_buf[ETH_ALEN];
+
 struct vdpasim_virtqueue {
 	struct vringh vring;
 	struct vringh_kiov iov;
@@ -396,13 +398,13 @@ static struct vdpasim *vdpasim_create(struct vdpasim_dev_attr *dev_attr)
 		goto err_iommu;
 
 	if (macaddr) {
-		mac_pton(macaddr, vdpasim->config.mac);
-		if (!is_valid_ether_addr(vdpasim->config.mac)) {
+		mac_pton(macaddr, macaddr_buf);
+		if (!is_valid_ether_addr(macaddr_buf)) {
 			ret = -EADDRNOTAVAIL;
 			goto err_iommu;
 		}
 	} else {
-		eth_random_addr(vdpasim->config.mac);
+		eth_random_addr(macaddr_buf);
 	}
 
 	for (i = 0; i < dev_attr->nvqs; i++)
@@ -538,6 +540,8 @@ static int vdpasim_set_features(struct vdpa_device *vdpa, u64 features)
 
 	config->mtu = cpu_to_vdpasim16(vdpasim, 1500);
 	config->status = cpu_to_vdpasim16(vdpasim, VIRTIO_NET_S_LINK_UP);
+	memcpy(config->mac, macaddr_buf, ETH_ALEN);
+
 	return 0;
 }
 
-- 
2.26.2

_______________________________________________
Virtualization mailing list
Virtualization@lists.linux-foundation.org
https://lists.linuxfoundation.org/mailman/listinfo/virtualization

[PATCH v4 11/18] vdpa_sim: make 'config' generic and usable for any device type

[Stefano Garzarella]

Add new 'config_size' attribute in 'vdpasim_dev_attr' and allocates
'config' dynamically to support any device types.

Acked-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: Stefano Garzarella <sgarzare@redhat.com>
---
 drivers/vdpa/vdpa_sim/vdpa_sim.c | 17 +++++++++++++----
 1 file changed, 13 insertions(+), 4 deletions(-)

diff --git a/drivers/vdpa/vdpa_sim/vdpa_sim.c b/drivers/vdpa/vdpa_sim/vdpa_sim.c
index ccb40501cbd7..4a0a6cadb9ff 100644
--- a/drivers/vdpa/vdpa_sim/vdpa_sim.c
+++ b/drivers/vdpa/vdpa_sim/vdpa_sim.c
@@ -70,6 +70,7 @@ struct vdpasim_virtqueue {
 
 struct vdpasim_dev_attr {
 	u64 supported_features;
+	size_t config_size;
 	int nvqs;
 	u32 id;
 
@@ -84,7 +85,8 @@ struct vdpasim {
 	struct vdpasim_dev_attr dev_attr;
 	/* spinlock to synchronize virtqueue state */
 	spinlock_t lock;
-	struct virtio_net_config config;
+	/* virtio config according to device type */
+	void *config;
 	struct vhost_iotlb *iommu;
 	void *buffer;
 	u32 status;
@@ -384,6 +386,10 @@ static struct vdpasim *vdpasim_create(struct vdpasim_dev_attr *dev_attr)
 		goto err_iommu;
 	set_dma_ops(dev, &vdpasim_dma_ops);
 
+	vdpasim->config = kzalloc(dev_attr->config_size, GFP_KERNEL);
+	if (!vdpasim->config)
+		goto err_iommu;
+
 	vdpasim->vqs = kcalloc(dev_attr->nvqs, sizeof(struct vdpasim_virtqueue),
 			       GFP_KERNEL);
 	if (!vdpasim->vqs)
@@ -524,7 +530,8 @@ static u64 vdpasim_get_features(struct vdpa_device *vdpa)
 static int vdpasim_set_features(struct vdpa_device *vdpa, u64 features)
 {
 	struct vdpasim *vdpasim = vdpa_to_sim(vdpa);
-	struct virtio_net_config *config = &vdpasim->config;
+	struct virtio_net_config *config =
+		(struct virtio_net_config *)vdpasim->config;
 
 	/* DMA mapping must be done by driver */
 	if (!(features & (1ULL << VIRTIO_F_ACCESS_PLATFORM)))
@@ -596,8 +603,8 @@ static void vdpasim_get_config(struct vdpa_device *vdpa, unsigned int offset,
 {
 	struct vdpasim *vdpasim = vdpa_to_sim(vdpa);
 
-	if (offset + len < sizeof(struct virtio_net_config))
-		memcpy(buf, (u8 *)&vdpasim->config + offset, len);
+	if (offset + len < vdpasim->dev_attr.config_size)
+		memcpy(buf, vdpasim->config + offset, len);
 }
 
 static void vdpasim_set_config(struct vdpa_device *vdpa, unsigned int offset,
@@ -684,6 +691,7 @@ static void vdpasim_free(struct vdpa_device *vdpa)
 	if (vdpasim->iommu)
 		vhost_iotlb_free(vdpasim->iommu);
 	kfree(vdpasim->vqs);
+	kfree(vdpasim->config);
 }
 
 static const struct vdpa_config_ops vdpasim_config_ops = {
@@ -746,6 +754,7 @@ static int __init vdpasim_dev_init(void)
 	dev_attr.id = VIRTIO_ID_NET;
 	dev_attr.supported_features = VDPASIM_NET_FEATURES;
 	dev_attr.nvqs = VDPASIM_VQ_NUM;
+	dev_attr.config_size = sizeof(struct virtio_net_config);
 	dev_attr.work_fn = vdpasim_net_work;
 
 	vdpasim_dev = vdpasim_create(&dev_attr);
-- 
2.26.2

[PATCH v4 11/18] vdpa_sim: make 'config' generic and usable for any device type

[Stefano Garzarella]

Add new 'config_size' attribute in 'vdpasim_dev_attr' and allocates
'config' dynamically to support any device types.

Acked-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: Stefano Garzarella <sgarzare@redhat.com>
---
 drivers/vdpa/vdpa_sim/vdpa_sim.c | 17 +++++++++++++----
 1 file changed, 13 insertions(+), 4 deletions(-)

diff --git a/drivers/vdpa/vdpa_sim/vdpa_sim.c b/drivers/vdpa/vdpa_sim/vdpa_sim.c
index ccb40501cbd7..4a0a6cadb9ff 100644
--- a/drivers/vdpa/vdpa_sim/vdpa_sim.c
+++ b/drivers/vdpa/vdpa_sim/vdpa_sim.c
@@ -70,6 +70,7 @@ struct vdpasim_virtqueue {
 
 struct vdpasim_dev_attr {
 	u64 supported_features;
+	size_t config_size;
 	int nvqs;
 	u32 id;
 
@@ -84,7 +85,8 @@ struct vdpasim {
 	struct vdpasim_dev_attr dev_attr;
 	/* spinlock to synchronize virtqueue state */
 	spinlock_t lock;
-	struct virtio_net_config config;
+	/* virtio config according to device type */
+	void *config;
 	struct vhost_iotlb *iommu;
 	void *buffer;
 	u32 status;
@@ -384,6 +386,10 @@ static struct vdpasim *vdpasim_create(struct vdpasim_dev_attr *dev_attr)
 		goto err_iommu;
 	set_dma_ops(dev, &vdpasim_dma_ops);
 
+	vdpasim->config = kzalloc(dev_attr->config_size, GFP_KERNEL);
+	if (!vdpasim->config)
+		goto err_iommu;
+
 	vdpasim->vqs = kcalloc(dev_attr->nvqs, sizeof(struct vdpasim_virtqueue),
 			       GFP_KERNEL);
 	if (!vdpasim->vqs)
@@ -524,7 +530,8 @@ static u64 vdpasim_get_features(struct vdpa_device *vdpa)
 static int vdpasim_set_features(struct vdpa_device *vdpa, u64 features)
 {
 	struct vdpasim *vdpasim = vdpa_to_sim(vdpa);
-	struct virtio_net_config *config = &vdpasim->config;
+	struct virtio_net_config *config =
+		(struct virtio_net_config *)vdpasim->config;
 
 	/* DMA mapping must be done by driver */
 	if (!(features & (1ULL << VIRTIO_F_ACCESS_PLATFORM)))
@@ -596,8 +603,8 @@ static void vdpasim_get_config(struct vdpa_device *vdpa, unsigned int offset,
 {
 	struct vdpasim *vdpasim = vdpa_to_sim(vdpa);
 
-	if (offset + len < sizeof(struct virtio_net_config))
-		memcpy(buf, (u8 *)&vdpasim->config + offset, len);
+	if (offset + len < vdpasim->dev_attr.config_size)
+		memcpy(buf, vdpasim->config + offset, len);
 }
 
 static void vdpasim_set_config(struct vdpa_device *vdpa, unsigned int offset,
@@ -684,6 +691,7 @@ static void vdpasim_free(struct vdpa_device *vdpa)
 	if (vdpasim->iommu)
 		vhost_iotlb_free(vdpasim->iommu);
 	kfree(vdpasim->vqs);
+	kfree(vdpasim->config);
 }
 
 static const struct vdpa_config_ops vdpasim_config_ops = {
@@ -746,6 +754,7 @@ static int __init vdpasim_dev_init(void)
 	dev_attr.id = VIRTIO_ID_NET;
 	dev_attr.supported_features = VDPASIM_NET_FEATURES;
 	dev_attr.nvqs = VDPASIM_VQ_NUM;
+	dev_attr.config_size = sizeof(struct virtio_net_config);
 	dev_attr.work_fn = vdpasim_net_work;
 
 	vdpasim_dev = vdpasim_create(&dev_attr);
-- 
2.26.2

_______________________________________________
Virtualization mailing list
Virtualization@lists.linux-foundation.org
https://lists.linuxfoundation.org/mailman/listinfo/virtualization

[PATCH v4 12/18] vdpa_sim: add get_config callback in vdpasim_dev_attr

[Stefano Garzarella]

The get_config callback can be used by the device to fill the
config structure.
The callback will be invoked in vdpasim_get_config() before copying
bytes into caller buffer.

Move vDPA-net config updates from vdpasim_set_features() in the
new vdpasim_net_get_config() callback.
This is safe since in vdpa_get_config() we already check that
.set_features() callback is called before .get_config().

Signed-off-by: Stefano Garzarella <sgarzare@redhat.com>
---
v4:
- explained in the commit message that the moving is safe [Jason]

v3:
- checked if get_config callback is set before call it
---
 drivers/vdpa/vdpa_sim/vdpa_sim.c | 35 +++++++++++++++++++-------------
 1 file changed, 21 insertions(+), 14 deletions(-)

diff --git a/drivers/vdpa/vdpa_sim/vdpa_sim.c b/drivers/vdpa/vdpa_sim/vdpa_sim.c
index 4a0a6cadb9ff..5eadcd19ab6f 100644
--- a/drivers/vdpa/vdpa_sim/vdpa_sim.c
+++ b/drivers/vdpa/vdpa_sim/vdpa_sim.c
@@ -68,6 +68,8 @@ struct vdpasim_virtqueue {
 #define VDPASIM_NET_FEATURES	(VDPASIM_FEATURES | \
 				 (1ULL << VIRTIO_NET_F_MAC))
 
+struct vdpasim;
+
 struct vdpasim_dev_attr {
 	u64 supported_features;
 	size_t config_size;
@@ -75,6 +77,7 @@ struct vdpasim_dev_attr {
 	u32 id;
 
 	work_func_t work_fn;
+	void (*get_config)(struct vdpasim *vdpasim, void *config);
 };
 
 /* State of each vdpasim device */
@@ -530,8 +533,6 @@ static u64 vdpasim_get_features(struct vdpa_device *vdpa)
 static int vdpasim_set_features(struct vdpa_device *vdpa, u64 features)
 {
 	struct vdpasim *vdpasim = vdpa_to_sim(vdpa);
-	struct virtio_net_config *config =
-		(struct virtio_net_config *)vdpasim->config;
 
 	/* DMA mapping must be done by driver */
 	if (!(features & (1ULL << VIRTIO_F_ACCESS_PLATFORM)))
@@ -539,16 +540,6 @@ static int vdpasim_set_features(struct vdpa_device *vdpa, u64 features)
 
 	vdpasim->features = features & vdpasim->dev_attr.supported_features;
 
-	/* We generally only know whether guest is using the legacy interface
-	 * here, so generally that's the earliest we can set config fields.
-	 * Note: We actually require VIRTIO_F_ACCESS_PLATFORM above which
-	 * implies VIRTIO_F_VERSION_1, but let's not try to be clever here.
-	 */
-
-	config->mtu = cpu_to_vdpasim16(vdpasim, 1500);
-	config->status = cpu_to_vdpasim16(vdpasim, VIRTIO_NET_S_LINK_UP);
-	memcpy(config->mac, macaddr_buf, ETH_ALEN);
-
 	return 0;
 }
 
@@ -603,8 +594,13 @@ static void vdpasim_get_config(struct vdpa_device *vdpa, unsigned int offset,
 {
 	struct vdpasim *vdpasim = vdpa_to_sim(vdpa);
 
-	if (offset + len < vdpasim->dev_attr.config_size)
-		memcpy(buf, vdpasim->config + offset, len);
+	if (offset + len > vdpasim->dev_attr.config_size)
+		return;
+
+	if (vdpasim->dev_attr.get_config)
+		vdpasim->dev_attr.get_config(vdpasim, vdpasim->config);
+
+	memcpy(buf, vdpasim->config + offset, len);
 }
 
 static void vdpasim_set_config(struct vdpa_device *vdpa, unsigned int offset,
@@ -747,6 +743,16 @@ static const struct vdpa_config_ops vdpasim_batch_config_ops = {
 	.free                   = vdpasim_free,
 };
 
+static void vdpasim_net_get_config(struct vdpasim *vdpasim, void *config)
+{
+	struct virtio_net_config *net_config =
+		(struct virtio_net_config *)config;
+
+	net_config->mtu = cpu_to_vdpasim16(vdpasim, 1500);
+	net_config->status = cpu_to_vdpasim16(vdpasim, VIRTIO_NET_S_LINK_UP);
+	memcpy(net_config->mac, macaddr_buf, ETH_ALEN);
+}
+
 static int __init vdpasim_dev_init(void)
 {
 	struct vdpasim_dev_attr dev_attr = {};
@@ -755,6 +761,7 @@ static int __init vdpasim_dev_init(void)
 	dev_attr.supported_features = VDPASIM_NET_FEATURES;
 	dev_attr.nvqs = VDPASIM_VQ_NUM;
 	dev_attr.config_size = sizeof(struct virtio_net_config);
+	dev_attr.get_config = vdpasim_net_get_config;
 	dev_attr.work_fn = vdpasim_net_work;
 
 	vdpasim_dev = vdpasim_create(&dev_attr);
-- 
2.26.2

[PATCH v4 12/18] vdpa_sim: add get_config callback in vdpasim_dev_attr

[Stefano Garzarella]

The get_config callback can be used by the device to fill the
config structure.
The callback will be invoked in vdpasim_get_config() before copying
bytes into caller buffer.

Move vDPA-net config updates from vdpasim_set_features() in the
new vdpasim_net_get_config() callback.
This is safe since in vdpa_get_config() we already check that
.set_features() callback is called before .get_config().

Signed-off-by: Stefano Garzarella <sgarzare@redhat.com>
---
v4:
- explained in the commit message that the moving is safe [Jason]

v3:
- checked if get_config callback is set before call it
---
 drivers/vdpa/vdpa_sim/vdpa_sim.c | 35 +++++++++++++++++++-------------
 1 file changed, 21 insertions(+), 14 deletions(-)

diff --git a/drivers/vdpa/vdpa_sim/vdpa_sim.c b/drivers/vdpa/vdpa_sim/vdpa_sim.c
index 4a0a6cadb9ff..5eadcd19ab6f 100644
--- a/drivers/vdpa/vdpa_sim/vdpa_sim.c
+++ b/drivers/vdpa/vdpa_sim/vdpa_sim.c
@@ -68,6 +68,8 @@ struct vdpasim_virtqueue {
 #define VDPASIM_NET_FEATURES	(VDPASIM_FEATURES | \
 				 (1ULL << VIRTIO_NET_F_MAC))
 
+struct vdpasim;
+
 struct vdpasim_dev_attr {
 	u64 supported_features;
 	size_t config_size;
@@ -75,6 +77,7 @@ struct vdpasim_dev_attr {
 	u32 id;
 
 	work_func_t work_fn;
+	void (*get_config)(struct vdpasim *vdpasim, void *config);
 };
 
 /* State of each vdpasim device */
@@ -530,8 +533,6 @@ static u64 vdpasim_get_features(struct vdpa_device *vdpa)
 static int vdpasim_set_features(struct vdpa_device *vdpa, u64 features)
 {
 	struct vdpasim *vdpasim = vdpa_to_sim(vdpa);
-	struct virtio_net_config *config =
-		(struct virtio_net_config *)vdpasim->config;
 
 	/* DMA mapping must be done by driver */
 	if (!(features & (1ULL << VIRTIO_F_ACCESS_PLATFORM)))
@@ -539,16 +540,6 @@ static int vdpasim_set_features(struct vdpa_device *vdpa, u64 features)
 
 	vdpasim->features = features & vdpasim->dev_attr.supported_features;
 
-	/* We generally only know whether guest is using the legacy interface
-	 * here, so generally that's the earliest we can set config fields.
-	 * Note: We actually require VIRTIO_F_ACCESS_PLATFORM above which
-	 * implies VIRTIO_F_VERSION_1, but let's not try to be clever here.
-	 */
-
-	config->mtu = cpu_to_vdpasim16(vdpasim, 1500);
-	config->status = cpu_to_vdpasim16(vdpasim, VIRTIO_NET_S_LINK_UP);
-	memcpy(config->mac, macaddr_buf, ETH_ALEN);
-
 	return 0;
 }
 
@@ -603,8 +594,13 @@ static void vdpasim_get_config(struct vdpa_device *vdpa, unsigned int offset,
 {
 	struct vdpasim *vdpasim = vdpa_to_sim(vdpa);
 
-	if (offset + len < vdpasim->dev_attr.config_size)
-		memcpy(buf, vdpasim->config + offset, len);
+	if (offset + len > vdpasim->dev_attr.config_size)
+		return;
+
+	if (vdpasim->dev_attr.get_config)
+		vdpasim->dev_attr.get_config(vdpasim, vdpasim->config);
+
+	memcpy(buf, vdpasim->config + offset, len);
 }
 
 static void vdpasim_set_config(struct vdpa_device *vdpa, unsigned int offset,
@@ -747,6 +743,16 @@ static const struct vdpa_config_ops vdpasim_batch_config_ops = {
 	.free                   = vdpasim_free,
 };
 
+static void vdpasim_net_get_config(struct vdpasim *vdpasim, void *config)
+{
+	struct virtio_net_config *net_config =
+		(struct virtio_net_config *)config;
+
+	net_config->mtu = cpu_to_vdpasim16(vdpasim, 1500);
+	net_config->status = cpu_to_vdpasim16(vdpasim, VIRTIO_NET_S_LINK_UP);
+	memcpy(net_config->mac, macaddr_buf, ETH_ALEN);
+}
+
 static int __init vdpasim_dev_init(void)
 {
 	struct vdpasim_dev_attr dev_attr = {};
@@ -755,6 +761,7 @@ static int __init vdpasim_dev_init(void)
 	dev_attr.supported_features = VDPASIM_NET_FEATURES;
 	dev_attr.nvqs = VDPASIM_VQ_NUM;
 	dev_attr.config_size = sizeof(struct virtio_net_config);
+	dev_attr.get_config = vdpasim_net_get_config;
 	dev_attr.work_fn = vdpasim_net_work;
 
 	vdpasim_dev = vdpasim_create(&dev_attr);
-- 
2.26.2

_______________________________________________
Virtualization mailing list
Virtualization@lists.linux-foundation.org
https://lists.linuxfoundation.org/mailman/listinfo/virtualization

Re: [PATCH v4 12/18] vdpa_sim: add get_config callback in vdpasim_dev_attr

[Jason Wang]

On 2020/12/15 下午10:42, Stefano Garzarella wrote:
> The get_config callback can be used by the device to fill the
> config structure.
> The callback will be invoked in vdpasim_get_config() before copying
> bytes into caller buffer.
>
> Move vDPA-net config updates from vdpasim_set_features() in the
> new vdpasim_net_get_config() callback.
> This is safe since in vdpa_get_config() we already check that
> .set_features() callback is called before .get_config().
>
> Signed-off-by: Stefano Garzarella <sgarzare@redhat.com>


Acked-by: Jason Wang <jasowang@redhat.com>


> ---
> v4:
> - explained in the commit message that the moving is safe [Jason]
>
> v3:
> - checked if get_config callback is set before call it
> ---
>   drivers/vdpa/vdpa_sim/vdpa_sim.c | 35 +++++++++++++++++++-------------
>   1 file changed, 21 insertions(+), 14 deletions(-)
>
> diff --git a/drivers/vdpa/vdpa_sim/vdpa_sim.c b/drivers/vdpa/vdpa_sim/vdpa_sim.c
> index 4a0a6cadb9ff..5eadcd19ab6f 100644
> --- a/drivers/vdpa/vdpa_sim/vdpa_sim.c
> +++ b/drivers/vdpa/vdpa_sim/vdpa_sim.c
> @@ -68,6 +68,8 @@ struct vdpasim_virtqueue {
>   #define VDPASIM_NET_FEATURES	(VDPASIM_FEATURES | \
>   				 (1ULL << VIRTIO_NET_F_MAC))
>   
> +struct vdpasim;
> +
>   struct vdpasim_dev_attr {
>   	u64 supported_features;
>   	size_t config_size;
> @@ -75,6 +77,7 @@ struct vdpasim_dev_attr {
>   	u32 id;
>   
>   	work_func_t work_fn;
> +	void (*get_config)(struct vdpasim *vdpasim, void *config);
>   };
>   
>   /* State of each vdpasim device */
> @@ -530,8 +533,6 @@ static u64 vdpasim_get_features(struct vdpa_device *vdpa)
>   static int vdpasim_set_features(struct vdpa_device *vdpa, u64 features)
>   {
>   	struct vdpasim *vdpasim = vdpa_to_sim(vdpa);
> -	struct virtio_net_config *config =
> -		(struct virtio_net_config *)vdpasim->config;
>   
>   	/* DMA mapping must be done by driver */
>   	if (!(features & (1ULL << VIRTIO_F_ACCESS_PLATFORM)))
> @@ -539,16 +540,6 @@ static int vdpasim_set_features(struct vdpa_device *vdpa, u64 features)
>   
>   	vdpasim->features = features & vdpasim->dev_attr.supported_features;
>   
> -	/* We generally only know whether guest is using the legacy interface
> -	 * here, so generally that's the earliest we can set config fields.
> -	 * Note: We actually require VIRTIO_F_ACCESS_PLATFORM above which
> -	 * implies VIRTIO_F_VERSION_1, but let's not try to be clever here.
> -	 */
> -
> -	config->mtu = cpu_to_vdpasim16(vdpasim, 1500);
> -	config->status = cpu_to_vdpasim16(vdpasim, VIRTIO_NET_S_LINK_UP);
> -	memcpy(config->mac, macaddr_buf, ETH_ALEN);
> -
>   	return 0;
>   }
>   
> @@ -603,8 +594,13 @@ static void vdpasim_get_config(struct vdpa_device *vdpa, unsigned int offset,
>   {
>   	struct vdpasim *vdpasim = vdpa_to_sim(vdpa);
>   
> -	if (offset + len < vdpasim->dev_attr.config_size)
> -		memcpy(buf, vdpasim->config + offset, len);
> +	if (offset + len > vdpasim->dev_attr.config_size)
> +		return;
> +
> +	if (vdpasim->dev_attr.get_config)
> +		vdpasim->dev_attr.get_config(vdpasim, vdpasim->config);
> +
> +	memcpy(buf, vdpasim->config + offset, len);
>   }
>   
>   static void vdpasim_set_config(struct vdpa_device *vdpa, unsigned int offset,
> @@ -747,6 +743,16 @@ static const struct vdpa_config_ops vdpasim_batch_config_ops = {
>   	.free                   = vdpasim_free,
>   };
>   
> +static void vdpasim_net_get_config(struct vdpasim *vdpasim, void *config)
> +{
> +	struct virtio_net_config *net_config =
> +		(struct virtio_net_config *)config;
> +
> +	net_config->mtu = cpu_to_vdpasim16(vdpasim, 1500);
> +	net_config->status = cpu_to_vdpasim16(vdpasim, VIRTIO_NET_S_LINK_UP);
> +	memcpy(net_config->mac, macaddr_buf, ETH_ALEN);
> +}
> +
>   static int __init vdpasim_dev_init(void)
>   {
>   	struct vdpasim_dev_attr dev_attr = {};
> @@ -755,6 +761,7 @@ static int __init vdpasim_dev_init(void)
>   	dev_attr.supported_features = VDPASIM_NET_FEATURES;
>   	dev_attr.nvqs = VDPASIM_VQ_NUM;
>   	dev_attr.config_size = sizeof(struct virtio_net_config);
> +	dev_attr.get_config = vdpasim_net_get_config;
>   	dev_attr.work_fn = vdpasim_net_work;
>   
>   	vdpasim_dev = vdpasim_create(&dev_attr);

Re: [PATCH v4 12/18] vdpa_sim: add get_config callback in vdpasim_dev_attr

[Jason Wang]

On 2020/12/15 下午10:42, Stefano Garzarella wrote:
> The get_config callback can be used by the device to fill the
> config structure.
> The callback will be invoked in vdpasim_get_config() before copying
> bytes into caller buffer.
>
> Move vDPA-net config updates from vdpasim_set_features() in the
> new vdpasim_net_get_config() callback.
> This is safe since in vdpa_get_config() we already check that
> .set_features() callback is called before .get_config().
>
> Signed-off-by: Stefano Garzarella <sgarzare@redhat.com>


Acked-by: Jason Wang <jasowang@redhat.com>


> ---
> v4:
> - explained in the commit message that the moving is safe [Jason]
>
> v3:
> - checked if get_config callback is set before call it
> ---
>   drivers/vdpa/vdpa_sim/vdpa_sim.c | 35 +++++++++++++++++++-------------
>   1 file changed, 21 insertions(+), 14 deletions(-)
>
> diff --git a/drivers/vdpa/vdpa_sim/vdpa_sim.c b/drivers/vdpa/vdpa_sim/vdpa_sim.c
> index 4a0a6cadb9ff..5eadcd19ab6f 100644
> --- a/drivers/vdpa/vdpa_sim/vdpa_sim.c
> +++ b/drivers/vdpa/vdpa_sim/vdpa_sim.c
> @@ -68,6 +68,8 @@ struct vdpasim_virtqueue {
>   #define VDPASIM_NET_FEATURES	(VDPASIM_FEATURES | \
>   				 (1ULL << VIRTIO_NET_F_MAC))
>   
> +struct vdpasim;
> +
>   struct vdpasim_dev_attr {
>   	u64 supported_features;
>   	size_t config_size;
> @@ -75,6 +77,7 @@ struct vdpasim_dev_attr {
>   	u32 id;
>   
>   	work_func_t work_fn;
> +	void (*get_config)(struct vdpasim *vdpasim, void *config);
>   };
>   
>   /* State of each vdpasim device */
> @@ -530,8 +533,6 @@ static u64 vdpasim_get_features(struct vdpa_device *vdpa)
>   static int vdpasim_set_features(struct vdpa_device *vdpa, u64 features)
>   {
>   	struct vdpasim *vdpasim = vdpa_to_sim(vdpa);
> -	struct virtio_net_config *config =
> -		(struct virtio_net_config *)vdpasim->config;
>   
>   	/* DMA mapping must be done by driver */
>   	if (!(features & (1ULL << VIRTIO_F_ACCESS_PLATFORM)))
> @@ -539,16 +540,6 @@ static int vdpasim_set_features(struct vdpa_device *vdpa, u64 features)
>   
>   	vdpasim->features = features & vdpasim->dev_attr.supported_features;
>   
> -	/* We generally only know whether guest is using the legacy interface
> -	 * here, so generally that's the earliest we can set config fields.
> -	 * Note: We actually require VIRTIO_F_ACCESS_PLATFORM above which
> -	 * implies VIRTIO_F_VERSION_1, but let's not try to be clever here.
> -	 */
> -
> -	config->mtu = cpu_to_vdpasim16(vdpasim, 1500);
> -	config->status = cpu_to_vdpasim16(vdpasim, VIRTIO_NET_S_LINK_UP);
> -	memcpy(config->mac, macaddr_buf, ETH_ALEN);
> -
>   	return 0;
>   }
>   
> @@ -603,8 +594,13 @@ static void vdpasim_get_config(struct vdpa_device *vdpa, unsigned int offset,
>   {
>   	struct vdpasim *vdpasim = vdpa_to_sim(vdpa);
>   
> -	if (offset + len < vdpasim->dev_attr.config_size)
> -		memcpy(buf, vdpasim->config + offset, len);
> +	if (offset + len > vdpasim->dev_attr.config_size)
> +		return;
> +
> +	if (vdpasim->dev_attr.get_config)
> +		vdpasim->dev_attr.get_config(vdpasim, vdpasim->config);
> +
> +	memcpy(buf, vdpasim->config + offset, len);
>   }
>   
>   static void vdpasim_set_config(struct vdpa_device *vdpa, unsigned int offset,
> @@ -747,6 +743,16 @@ static const struct vdpa_config_ops vdpasim_batch_config_ops = {
>   	.free                   = vdpasim_free,
>   };
>   
> +static void vdpasim_net_get_config(struct vdpasim *vdpasim, void *config)
> +{
> +	struct virtio_net_config *net_config =
> +		(struct virtio_net_config *)config;
> +
> +	net_config->mtu = cpu_to_vdpasim16(vdpasim, 1500);
> +	net_config->status = cpu_to_vdpasim16(vdpasim, VIRTIO_NET_S_LINK_UP);
> +	memcpy(net_config->mac, macaddr_buf, ETH_ALEN);
> +}
> +
>   static int __init vdpasim_dev_init(void)
>   {
>   	struct vdpasim_dev_attr dev_attr = {};
> @@ -755,6 +761,7 @@ static int __init vdpasim_dev_init(void)
>   	dev_attr.supported_features = VDPASIM_NET_FEATURES;
>   	dev_attr.nvqs = VDPASIM_VQ_NUM;
>   	dev_attr.config_size = sizeof(struct virtio_net_config);
> +	dev_attr.get_config = vdpasim_net_get_config;
>   	dev_attr.work_fn = vdpasim_net_work;
>   
>   	vdpasim_dev = vdpasim_create(&dev_attr);

_______________________________________________
Virtualization mailing list
Virtualization@lists.linux-foundation.org
https://lists.linuxfoundation.org/mailman/listinfo/virtualization

[PATCH v4 13/18] vdpa_sim: add set_config callback in vdpasim_dev_attr

[Stefano Garzarella]

The set_config callback can be used by the device to parse the
config structure modified by the driver.

The callback will be invoked, if set, in vdpasim_set_config() after
copying bytes from caller buffer into vdpasim->config buffer.

Acked-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: Stefano Garzarella <sgarzare@redhat.com>
---
 drivers/vdpa/vdpa_sim/vdpa_sim.c | 11 ++++++++++-
 1 file changed, 10 insertions(+), 1 deletion(-)

diff --git a/drivers/vdpa/vdpa_sim/vdpa_sim.c b/drivers/vdpa/vdpa_sim/vdpa_sim.c
index 5eadcd19ab6f..e219aa852ef8 100644
--- a/drivers/vdpa/vdpa_sim/vdpa_sim.c
+++ b/drivers/vdpa/vdpa_sim/vdpa_sim.c
@@ -78,6 +78,7 @@ struct vdpasim_dev_attr {
 
 	work_func_t work_fn;
 	void (*get_config)(struct vdpasim *vdpasim, void *config);
+	void (*set_config)(struct vdpasim *vdpasim, const void *config);
 };
 
 /* State of each vdpasim device */
@@ -606,7 +607,15 @@ static void vdpasim_get_config(struct vdpa_device *vdpa, unsigned int offset,
 static void vdpasim_set_config(struct vdpa_device *vdpa, unsigned int offset,
 			     const void *buf, unsigned int len)
 {
-	/* No writable config supportted by vdpasim */
+	struct vdpasim *vdpasim = vdpa_to_sim(vdpa);
+
+	if (offset + len > vdpasim->dev_attr.config_size)
+		return;
+
+	memcpy(vdpasim->config + offset, buf, len);
+
+	if (vdpasim->dev_attr.set_config)
+		vdpasim->dev_attr.set_config(vdpasim, vdpasim->config);
 }
 
 static u32 vdpasim_get_generation(struct vdpa_device *vdpa)
-- 
2.26.2

[PATCH v4 13/18] vdpa_sim: add set_config callback in vdpasim_dev_attr

[Stefano Garzarella]

The set_config callback can be used by the device to parse the
config structure modified by the driver.

The callback will be invoked, if set, in vdpasim_set_config() after
copying bytes from caller buffer into vdpasim->config buffer.

Acked-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: Stefano Garzarella <sgarzare@redhat.com>
---
 drivers/vdpa/vdpa_sim/vdpa_sim.c | 11 ++++++++++-
 1 file changed, 10 insertions(+), 1 deletion(-)

diff --git a/drivers/vdpa/vdpa_sim/vdpa_sim.c b/drivers/vdpa/vdpa_sim/vdpa_sim.c
index 5eadcd19ab6f..e219aa852ef8 100644
--- a/drivers/vdpa/vdpa_sim/vdpa_sim.c
+++ b/drivers/vdpa/vdpa_sim/vdpa_sim.c
@@ -78,6 +78,7 @@ struct vdpasim_dev_attr {
 
 	work_func_t work_fn;
 	void (*get_config)(struct vdpasim *vdpasim, void *config);
+	void (*set_config)(struct vdpasim *vdpasim, const void *config);
 };
 
 /* State of each vdpasim device */
@@ -606,7 +607,15 @@ static void vdpasim_get_config(struct vdpa_device *vdpa, unsigned int offset,
 static void vdpasim_set_config(struct vdpa_device *vdpa, unsigned int offset,
 			     const void *buf, unsigned int len)
 {
-	/* No writable config supportted by vdpasim */
+	struct vdpasim *vdpasim = vdpa_to_sim(vdpa);
+
+	if (offset + len > vdpasim->dev_attr.config_size)
+		return;
+
+	memcpy(vdpasim->config + offset, buf, len);
+
+	if (vdpasim->dev_attr.set_config)
+		vdpasim->dev_attr.set_config(vdpasim, vdpasim->config);
 }
 
 static u32 vdpasim_get_generation(struct vdpa_device *vdpa)
-- 
2.26.2

_______________________________________________
Virtualization mailing list
Virtualization@lists.linux-foundation.org
https://lists.linuxfoundation.org/mailman/listinfo/virtualization

[PATCH v4 14/18] vdpa_sim: set vringh notify callback

[Stefano Garzarella]

Instead of calling the vq callback directly, we can leverage the
vringh_notify() function, adding vdpasim_vq_notify() and setting it
in the vringh notify callback.

Suggested-by: Jason Wang <jasowang@redhat.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: Stefano Garzarella <sgarzare@redhat.com>
---
v3:
- cleared notify during reset [Jason]
---
 drivers/vdpa/vdpa_sim/vdpa_sim.c | 23 +++++++++++++++++++----
 1 file changed, 19 insertions(+), 4 deletions(-)

diff --git a/drivers/vdpa/vdpa_sim/vdpa_sim.c b/drivers/vdpa/vdpa_sim/vdpa_sim.c
index e219aa852ef8..19ff5e352782 100644
--- a/drivers/vdpa/vdpa_sim/vdpa_sim.c
+++ b/drivers/vdpa/vdpa_sim/vdpa_sim.c
@@ -131,6 +131,17 @@ static struct vdpasim *dev_to_sim(struct device *dev)
 	return vdpa_to_sim(vdpa);
 }
 
+static void vdpasim_vq_notify(struct vringh *vring)
+{
+	struct vdpasim_virtqueue *vq =
+		container_of(vring, struct vdpasim_virtqueue, vring);
+
+	if (!vq->cb)
+		return;
+
+	vq->cb(vq->private);
+}
+
 static void vdpasim_queue_ready(struct vdpasim *vdpasim, unsigned int idx)
 {
 	struct vdpasim_virtqueue *vq = &vdpasim->vqs[idx];
@@ -142,6 +153,8 @@ static void vdpasim_queue_ready(struct vdpasim *vdpasim, unsigned int idx)
 			  (uintptr_t)vq->driver_addr,
 			  (struct vring_used *)
 			  (uintptr_t)vq->device_addr);
+
+	vq->vring.notify = vdpasim_vq_notify;
 }
 
 static void vdpasim_vq_reset(struct vdpasim *vdpasim,
@@ -155,6 +168,8 @@ static void vdpasim_vq_reset(struct vdpasim *vdpasim,
 	vq->private = NULL;
 	vringh_init_iotlb(&vq->vring, vdpasim->dev_attr.supported_features,
 			  VDPASIM_QUEUE_MAX, false, NULL, NULL, NULL);
+
+	vq->vring.notify = NULL;
 }
 
 static void vdpasim_reset(struct vdpasim *vdpasim)
@@ -231,10 +246,10 @@ static void vdpasim_net_work(struct work_struct *work)
 		smp_wmb();
 
 		local_bh_disable();
-		if (txq->cb)
-			txq->cb(txq->private);
-		if (rxq->cb)
-			rxq->cb(rxq->private);
+		if (vringh_need_notify_iotlb(&txq->vring) > 0)
+			vringh_notify(&txq->vring);
+		if (vringh_need_notify_iotlb(&rxq->vring) > 0)
+			vringh_notify(&rxq->vring);
 		local_bh_enable();
 
 		if (++pkts > 4) {
-- 
2.26.2

[PATCH v4 14/18] vdpa_sim: set vringh notify callback

[Stefano Garzarella]

Instead of calling the vq callback directly, we can leverage the
vringh_notify() function, adding vdpasim_vq_notify() and setting it
in the vringh notify callback.

Suggested-by: Jason Wang <jasowang@redhat.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: Stefano Garzarella <sgarzare@redhat.com>
---
v3:
- cleared notify during reset [Jason]
---
 drivers/vdpa/vdpa_sim/vdpa_sim.c | 23 +++++++++++++++++++----
 1 file changed, 19 insertions(+), 4 deletions(-)

diff --git a/drivers/vdpa/vdpa_sim/vdpa_sim.c b/drivers/vdpa/vdpa_sim/vdpa_sim.c
index e219aa852ef8..19ff5e352782 100644
--- a/drivers/vdpa/vdpa_sim/vdpa_sim.c
+++ b/drivers/vdpa/vdpa_sim/vdpa_sim.c
@@ -131,6 +131,17 @@ static struct vdpasim *dev_to_sim(struct device *dev)
 	return vdpa_to_sim(vdpa);
 }
 
+static void vdpasim_vq_notify(struct vringh *vring)
+{
+	struct vdpasim_virtqueue *vq =
+		container_of(vring, struct vdpasim_virtqueue, vring);
+
+	if (!vq->cb)
+		return;
+
+	vq->cb(vq->private);
+}
+
 static void vdpasim_queue_ready(struct vdpasim *vdpasim, unsigned int idx)
 {
 	struct vdpasim_virtqueue *vq = &vdpasim->vqs[idx];
@@ -142,6 +153,8 @@ static void vdpasim_queue_ready(struct vdpasim *vdpasim, unsigned int idx)
 			  (uintptr_t)vq->driver_addr,
 			  (struct vring_used *)
 			  (uintptr_t)vq->device_addr);
+
+	vq->vring.notify = vdpasim_vq_notify;
 }
 
 static void vdpasim_vq_reset(struct vdpasim *vdpasim,
@@ -155,6 +168,8 @@ static void vdpasim_vq_reset(struct vdpasim *vdpasim,
 	vq->private = NULL;
 	vringh_init_iotlb(&vq->vring, vdpasim->dev_attr.supported_features,
 			  VDPASIM_QUEUE_MAX, false, NULL, NULL, NULL);
+
+	vq->vring.notify = NULL;
 }
 
 static void vdpasim_reset(struct vdpasim *vdpasim)
@@ -231,10 +246,10 @@ static void vdpasim_net_work(struct work_struct *work)
 		smp_wmb();
 
 		local_bh_disable();
-		if (txq->cb)
-			txq->cb(txq->private);
-		if (rxq->cb)
-			rxq->cb(rxq->private);
+		if (vringh_need_notify_iotlb(&txq->vring) > 0)
+			vringh_notify(&txq->vring);
+		if (vringh_need_notify_iotlb(&rxq->vring) > 0)
+			vringh_notify(&rxq->vring);
 		local_bh_enable();
 
 		if (++pkts > 4) {
-- 
2.26.2

_______________________________________________
Virtualization mailing list
Virtualization@lists.linux-foundation.org
https://lists.linuxfoundation.org/mailman/listinfo/virtualization

[PATCH v4 15/18] vdpa_sim: use kvmalloc to allocate vdpasim->buffer

[Stefano Garzarella]

The next patch will make the buffer size configurable from each
device.
Since the buffer could be larger than a page, we use kvmalloc()
instead of kmalloc().

Acked-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: Stefano Garzarella <sgarzare@redhat.com>
---
 drivers/vdpa/vdpa_sim/vdpa_sim.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/vdpa/vdpa_sim/vdpa_sim.c b/drivers/vdpa/vdpa_sim/vdpa_sim.c
index 19ff5e352782..87529899033a 100644
--- a/drivers/vdpa/vdpa_sim/vdpa_sim.c
+++ b/drivers/vdpa/vdpa_sim/vdpa_sim.c
@@ -418,7 +418,7 @@ static struct vdpasim *vdpasim_create(struct vdpasim_dev_attr *dev_attr)
 	if (!vdpasim->iommu)
 		goto err_iommu;
 
-	vdpasim->buffer = kmalloc(PAGE_SIZE, GFP_KERNEL);
+	vdpasim->buffer = kvmalloc(PAGE_SIZE, GFP_KERNEL);
 	if (!vdpasim->buffer)
 		goto err_iommu;
 
@@ -707,7 +707,7 @@ static void vdpasim_free(struct vdpa_device *vdpa)
 	struct vdpasim *vdpasim = vdpa_to_sim(vdpa);
 
 	cancel_work_sync(&vdpasim->work);
-	kfree(vdpasim->buffer);
+	kvfree(vdpasim->buffer);
 	if (vdpasim->iommu)
 		vhost_iotlb_free(vdpasim->iommu);
 	kfree(vdpasim->vqs);
-- 
2.26.2

[PATCH v4 15/18] vdpa_sim: use kvmalloc to allocate vdpasim->buffer

[Stefano Garzarella]

The next patch will make the buffer size configurable from each
device.
Since the buffer could be larger than a page, we use kvmalloc()
instead of kmalloc().

Acked-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: Stefano Garzarella <sgarzare@redhat.com>
---
 drivers/vdpa/vdpa_sim/vdpa_sim.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/vdpa/vdpa_sim/vdpa_sim.c b/drivers/vdpa/vdpa_sim/vdpa_sim.c
index 19ff5e352782..87529899033a 100644
--- a/drivers/vdpa/vdpa_sim/vdpa_sim.c
+++ b/drivers/vdpa/vdpa_sim/vdpa_sim.c
@@ -418,7 +418,7 @@ static struct vdpasim *vdpasim_create(struct vdpasim_dev_attr *dev_attr)
 	if (!vdpasim->iommu)
 		goto err_iommu;
 
-	vdpasim->buffer = kmalloc(PAGE_SIZE, GFP_KERNEL);
+	vdpasim->buffer = kvmalloc(PAGE_SIZE, GFP_KERNEL);
 	if (!vdpasim->buffer)
 		goto err_iommu;
 
@@ -707,7 +707,7 @@ static void vdpasim_free(struct vdpa_device *vdpa)
 	struct vdpasim *vdpasim = vdpa_to_sim(vdpa);
 
 	cancel_work_sync(&vdpasim->work);
-	kfree(vdpasim->buffer);
+	kvfree(vdpasim->buffer);
 	if (vdpasim->iommu)
 		vhost_iotlb_free(vdpasim->iommu);
 	kfree(vdpasim->vqs);
-- 
2.26.2

_______________________________________________
Virtualization mailing list
Virtualization@lists.linux-foundation.org
https://lists.linuxfoundation.org/mailman/listinfo/virtualization

[PATCH v4 16/18] vdpa_sim: make vdpasim->buffer size configurable

[Stefano Garzarella]

Allow each device to specify the size of the buffer allocated
in vdpa_sim.

Acked-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: Stefano Garzarella <sgarzare@redhat.com>
---
 drivers/vdpa/vdpa_sim/vdpa_sim.c | 4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)

diff --git a/drivers/vdpa/vdpa_sim/vdpa_sim.c b/drivers/vdpa/vdpa_sim/vdpa_sim.c
index 87529899033a..60e45db29b15 100644
--- a/drivers/vdpa/vdpa_sim/vdpa_sim.c
+++ b/drivers/vdpa/vdpa_sim/vdpa_sim.c
@@ -73,6 +73,7 @@ struct vdpasim;
 struct vdpasim_dev_attr {
 	u64 supported_features;
 	size_t config_size;
+	size_t buffer_size;
 	int nvqs;
 	u32 id;
 
@@ -418,7 +419,7 @@ static struct vdpasim *vdpasim_create(struct vdpasim_dev_attr *dev_attr)
 	if (!vdpasim->iommu)
 		goto err_iommu;
 
-	vdpasim->buffer = kvmalloc(PAGE_SIZE, GFP_KERNEL);
+	vdpasim->buffer = kvmalloc(dev_attr->buffer_size, GFP_KERNEL);
 	if (!vdpasim->buffer)
 		goto err_iommu;
 
@@ -787,6 +788,7 @@ static int __init vdpasim_dev_init(void)
 	dev_attr.config_size = sizeof(struct virtio_net_config);
 	dev_attr.get_config = vdpasim_net_get_config;
 	dev_attr.work_fn = vdpasim_net_work;
+	dev_attr.buffer_size = PAGE_SIZE;
 
 	vdpasim_dev = vdpasim_create(&dev_attr);
 
-- 
2.26.2

[PATCH v4 16/18] vdpa_sim: make vdpasim->buffer size configurable

[Stefano Garzarella]

Allow each device to specify the size of the buffer allocated
in vdpa_sim.

Acked-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: Stefano Garzarella <sgarzare@redhat.com>
---
 drivers/vdpa/vdpa_sim/vdpa_sim.c | 4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)

diff --git a/drivers/vdpa/vdpa_sim/vdpa_sim.c b/drivers/vdpa/vdpa_sim/vdpa_sim.c
index 87529899033a..60e45db29b15 100644
--- a/drivers/vdpa/vdpa_sim/vdpa_sim.c
+++ b/drivers/vdpa/vdpa_sim/vdpa_sim.c
@@ -73,6 +73,7 @@ struct vdpasim;
 struct vdpasim_dev_attr {
 	u64 supported_features;
 	size_t config_size;
+	size_t buffer_size;
 	int nvqs;
 	u32 id;
 
@@ -418,7 +419,7 @@ static struct vdpasim *vdpasim_create(struct vdpasim_dev_attr *dev_attr)
 	if (!vdpasim->iommu)
 		goto err_iommu;
 
-	vdpasim->buffer = kvmalloc(PAGE_SIZE, GFP_KERNEL);
+	vdpasim->buffer = kvmalloc(dev_attr->buffer_size, GFP_KERNEL);
 	if (!vdpasim->buffer)
 		goto err_iommu;
 
@@ -787,6 +788,7 @@ static int __init vdpasim_dev_init(void)
 	dev_attr.config_size = sizeof(struct virtio_net_config);
 	dev_attr.get_config = vdpasim_net_get_config;
 	dev_attr.work_fn = vdpasim_net_work;
+	dev_attr.buffer_size = PAGE_SIZE;
 
 	vdpasim_dev = vdpasim_create(&dev_attr);
 
-- 
2.26.2

_______________________________________________
Virtualization mailing list
Virtualization@lists.linux-foundation.org
https://lists.linuxfoundation.org/mailman/listinfo/virtualization

[PATCH v4 17/18] vdpa_sim: split vdpasim_virtqueue's iov field in out_iov and in_iov

[Stefano Garzarella]

vringh_getdesc_iotlb() manages 2 iovs for writable and readable
descriptors. This is very useful for the block device, where for
each request we have both types of descriptor.

Let's split the vdpasim_virtqueue's iov field in out_iov and
in_iov to use them with vringh_getdesc_iotlb().

We are using VIRTIO terminology for "out" (readable by the device)
and "in" (writable by the device) descriptors.

Acked-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: Stefano Garzarella <sgarzare@redhat.com>
---
v2:
- used VIRTIO terminology [Stefan]
---
 drivers/vdpa/vdpa_sim/vdpa_sim.c | 11 ++++++-----
 1 file changed, 6 insertions(+), 5 deletions(-)

diff --git a/drivers/vdpa/vdpa_sim/vdpa_sim.c b/drivers/vdpa/vdpa_sim/vdpa_sim.c
index 60e45db29b15..875e42390a13 100644
--- a/drivers/vdpa/vdpa_sim/vdpa_sim.c
+++ b/drivers/vdpa/vdpa_sim/vdpa_sim.c
@@ -44,7 +44,8 @@ u8 macaddr_buf[ETH_ALEN];
 
 struct vdpasim_virtqueue {
 	struct vringh vring;
-	struct vringh_kiov iov;
+	struct vringh_kiov in_iov;
+	struct vringh_kiov out_iov;
 	unsigned short head;
 	bool ready;
 	u64 desc_addr;
@@ -210,12 +211,12 @@ static void vdpasim_net_work(struct work_struct *work)
 
 	while (true) {
 		total_write = 0;
-		err = vringh_getdesc_iotlb(&txq->vring, &txq->iov, NULL,
+		err = vringh_getdesc_iotlb(&txq->vring, &txq->out_iov, NULL,
 					   &txq->head, GFP_ATOMIC);
 		if (err <= 0)
 			break;
 
-		err = vringh_getdesc_iotlb(&rxq->vring, NULL, &rxq->iov,
+		err = vringh_getdesc_iotlb(&rxq->vring, NULL, &rxq->in_iov,
 					   &rxq->head, GFP_ATOMIC);
 		if (err <= 0) {
 			vringh_complete_iotlb(&txq->vring, txq->head, 0);
@@ -223,13 +224,13 @@ static void vdpasim_net_work(struct work_struct *work)
 		}
 
 		while (true) {
-			read = vringh_iov_pull_iotlb(&txq->vring, &txq->iov,
+			read = vringh_iov_pull_iotlb(&txq->vring, &txq->out_iov,
 						     vdpasim->buffer,
 						     PAGE_SIZE);
 			if (read <= 0)
 				break;
 
-			write = vringh_iov_push_iotlb(&rxq->vring, &rxq->iov,
+			write = vringh_iov_push_iotlb(&rxq->vring, &rxq->in_iov,
 						      vdpasim->buffer, read);
 			if (write <= 0)
 				break;
-- 
2.26.2

[PATCH v4 17/18] vdpa_sim: split vdpasim_virtqueue's iov field in out_iov and in_iov

[Stefano Garzarella]

vringh_getdesc_iotlb() manages 2 iovs for writable and readable
descriptors. This is very useful for the block device, where for
each request we have both types of descriptor.

Let's split the vdpasim_virtqueue's iov field in out_iov and
in_iov to use them with vringh_getdesc_iotlb().

We are using VIRTIO terminology for "out" (readable by the device)
and "in" (writable by the device) descriptors.

Acked-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: Stefano Garzarella <sgarzare@redhat.com>
---
v2:
- used VIRTIO terminology [Stefan]
---
 drivers/vdpa/vdpa_sim/vdpa_sim.c | 11 ++++++-----
 1 file changed, 6 insertions(+), 5 deletions(-)

diff --git a/drivers/vdpa/vdpa_sim/vdpa_sim.c b/drivers/vdpa/vdpa_sim/vdpa_sim.c
index 60e45db29b15..875e42390a13 100644
--- a/drivers/vdpa/vdpa_sim/vdpa_sim.c
+++ b/drivers/vdpa/vdpa_sim/vdpa_sim.c
@@ -44,7 +44,8 @@ u8 macaddr_buf[ETH_ALEN];
 
 struct vdpasim_virtqueue {
 	struct vringh vring;
-	struct vringh_kiov iov;
+	struct vringh_kiov in_iov;
+	struct vringh_kiov out_iov;
 	unsigned short head;
 	bool ready;
 	u64 desc_addr;
@@ -210,12 +211,12 @@ static void vdpasim_net_work(struct work_struct *work)
 
 	while (true) {
 		total_write = 0;
-		err = vringh_getdesc_iotlb(&txq->vring, &txq->iov, NULL,
+		err = vringh_getdesc_iotlb(&txq->vring, &txq->out_iov, NULL,
 					   &txq->head, GFP_ATOMIC);
 		if (err <= 0)
 			break;
 
-		err = vringh_getdesc_iotlb(&rxq->vring, NULL, &rxq->iov,
+		err = vringh_getdesc_iotlb(&rxq->vring, NULL, &rxq->in_iov,
 					   &rxq->head, GFP_ATOMIC);
 		if (err <= 0) {
 			vringh_complete_iotlb(&txq->vring, txq->head, 0);
@@ -223,13 +224,13 @@ static void vdpasim_net_work(struct work_struct *work)
 		}
 
 		while (true) {
-			read = vringh_iov_pull_iotlb(&txq->vring, &txq->iov,
+			read = vringh_iov_pull_iotlb(&txq->vring, &txq->out_iov,
 						     vdpasim->buffer,
 						     PAGE_SIZE);
 			if (read <= 0)
 				break;
 
-			write = vringh_iov_push_iotlb(&rxq->vring, &rxq->iov,
+			write = vringh_iov_push_iotlb(&rxq->vring, &rxq->in_iov,
 						      vdpasim->buffer, read);
 			if (write <= 0)
 				break;
-- 
2.26.2

_______________________________________________
Virtualization mailing list
Virtualization@lists.linux-foundation.org
https://lists.linuxfoundation.org/mailman/listinfo/virtualization

[PATCH v4 18/18] vdpa: split vdpasim to core and net modules

[Stefano Garzarella]

From: Max Gurtovoy <mgurtovoy@nvidia.com>

Introduce new vdpa_sim_net and vdpa_sim (core) drivers. This is a
preparation for adding a vdpa simulator module for block devices.

Signed-off-by: Max Gurtovoy <mgurtovoy@nvidia.com>
[sgarzare: various cleanups/fixes]
Acked-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: Stefano Garzarella <sgarzare@redhat.com>
---
v4:
- Fixed typo (s/loop/loops) [Randy]
- Fixed #include [Randy]

v2:
- Fixed "warning: variable 'dev' is used uninitialized" reported by
  'kernel test robot' and Dan Carpenter
- rebased on top of other changes (dev_attr, get_config(), notify(), etc.)
- left batch_mapping module parameter in the core [Jason]

v1:
- Removed unused headers
- Removed empty module_init() module_exit()
- Moved vdpasim_is_little_endian() in vdpa_sim.h
- Moved vdpasim16_to_cpu/cpu_to_vdpasim16() in vdpa_sim.h
- Added vdpasim*_to_cpu/cpu_to_vdpasim*() also for 32 and 64
- Replaced 'select VDPA_SIM' with 'depends on VDPA_SIM' since selected
  option can not depend on other [Jason]
---
 drivers/vdpa/vdpa_sim/vdpa_sim.h     | 105 +++++++++++++
 drivers/vdpa/vdpa_sim/vdpa_sim.c     | 221 +--------------------------
 drivers/vdpa/vdpa_sim/vdpa_sim_net.c | 177 +++++++++++++++++++++
 drivers/vdpa/Kconfig                 |  13 +-
 drivers/vdpa/vdpa_sim/Makefile       |   1 +
 5 files changed, 298 insertions(+), 219 deletions(-)
 create mode 100644 drivers/vdpa/vdpa_sim/vdpa_sim.h
 create mode 100644 drivers/vdpa/vdpa_sim/vdpa_sim_net.c

diff --git a/drivers/vdpa/vdpa_sim/vdpa_sim.h b/drivers/vdpa/vdpa_sim/vdpa_sim.h
new file mode 100644
index 000000000000..b02142293d5b
--- /dev/null
+++ b/drivers/vdpa/vdpa_sim/vdpa_sim.h
@@ -0,0 +1,105 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * Copyright (c) 2020, Red Hat Inc. All rights reserved.
+ */
+
+#ifndef _VDPA_SIM_H
+#define _VDPA_SIM_H
+
+#include <linux/vringh.h>
+#include <linux/vdpa.h>
+#include <linux/virtio_byteorder.h>
+#include <linux/vhost_iotlb.h>
+#include <uapi/linux/virtio_config.h>
+
+#define VDPASIM_FEATURES	((1ULL << VIRTIO_F_ANY_LAYOUT) | \
+				 (1ULL << VIRTIO_F_VERSION_1)  | \
+				 (1ULL << VIRTIO_F_ACCESS_PLATFORM))
+
+struct vdpasim;
+
+struct vdpasim_virtqueue {
+	struct vringh vring;
+	struct vringh_kiov in_iov;
+	struct vringh_kiov out_iov;
+	unsigned short head;
+	bool ready;
+	u64 desc_addr;
+	u64 device_addr;
+	u64 driver_addr;
+	u32 num;
+	void *private;
+	irqreturn_t (*cb)(void *data);
+};
+
+struct vdpasim_dev_attr {
+	u64 supported_features;
+	size_t config_size;
+	size_t buffer_size;
+	int nvqs;
+	u32 id;
+
+	work_func_t work_fn;
+	void (*get_config)(struct vdpasim *vdpasim, void *config);
+	void (*set_config)(struct vdpasim *vdpasim, const void *config);
+};
+
+/* State of each vdpasim device */
+struct vdpasim {
+	struct vdpa_device vdpa;
+	struct vdpasim_virtqueue *vqs;
+	struct work_struct work;
+	struct vdpasim_dev_attr dev_attr;
+	/* spinlock to synchronize virtqueue state */
+	spinlock_t lock;
+	/* virtio config according to device type */
+	void *config;
+	struct vhost_iotlb *iommu;
+	void *buffer;
+	u32 status;
+	u32 generation;
+	u64 features;
+	/* spinlock to synchronize iommu table */
+	spinlock_t iommu_lock;
+};
+
+struct vdpasim *vdpasim_create(struct vdpasim_dev_attr *attr);
+
+/* TODO: cross-endian support */
+static inline bool vdpasim_is_little_endian(struct vdpasim *vdpasim)
+{
+	return virtio_legacy_is_little_endian() ||
+		(vdpasim->features & (1ULL << VIRTIO_F_VERSION_1));
+}
+
+static inline u16 vdpasim16_to_cpu(struct vdpasim *vdpasim, __virtio16 val)
+{
+	return __virtio16_to_cpu(vdpasim_is_little_endian(vdpasim), val);
+}
+
+static inline __virtio16 cpu_to_vdpasim16(struct vdpasim *vdpasim, u16 val)
+{
+	return __cpu_to_virtio16(vdpasim_is_little_endian(vdpasim), val);
+}
+
+static inline u32 vdpasim32_to_cpu(struct vdpasim *vdpasim, __virtio32 val)
+{
+	return __virtio32_to_cpu(vdpasim_is_little_endian(vdpasim), val);
+}
+
+static inline __virtio32 cpu_to_vdpasim32(struct vdpasim *vdpasim, u32 val)
+{
+	return __cpu_to_virtio32(vdpasim_is_little_endian(vdpasim), val);
+}
+
+static inline u64 vdpasim64_to_cpu(struct vdpasim *vdpasim, __virtio64 val)
+{
+	return __virtio64_to_cpu(vdpasim_is_little_endian(vdpasim), val);
+}
+
+static inline __virtio64 cpu_to_vdpasim64(struct vdpasim *vdpasim, u64 val)
+{
+	return __cpu_to_virtio64(vdpasim_is_little_endian(vdpasim), val);
+}
+
+#endif
diff --git a/drivers/vdpa/vdpa_sim/vdpa_sim.c b/drivers/vdpa/vdpa_sim/vdpa_sim.c
index 875e42390a13..b3fcc67bfdf0 100644
--- a/drivers/vdpa/vdpa_sim/vdpa_sim.c
+++ b/drivers/vdpa/vdpa_sim/vdpa_sim.c
@@ -1,6 +1,6 @@
 // SPDX-License-Identifier: GPL-2.0-only
 /*
- * VDPA networking device simulator.
+ * VDPA device simulator core.
  *
  * Copyright (c) 2020, Red Hat Inc. All rights reserved.
  *     Author: Jason Wang <jasowang@redhat.com>
@@ -14,17 +14,15 @@
 #include <linux/slab.h>
 #include <linux/sched.h>
 #include <linux/dma-map-ops.h>
-#include <linux/etherdevice.h>
 #include <linux/vringh.h>
 #include <linux/vdpa.h>
-#include <linux/virtio_byteorder.h>
 #include <linux/vhost_iotlb.h>
-#include <uapi/linux/virtio_config.h>
-#include <uapi/linux/virtio_net.h>
+
+#include "vdpa_sim.h"
 
 #define DRV_VERSION  "0.1"
 #define DRV_AUTHOR   "Jason Wang <jasowang@redhat.com>"
-#define DRV_DESC     "vDPA Device Simulator"
+#define DRV_DESC     "vDPA Device Simulator core"
 #define DRV_LICENSE  "GPL v2"
 
 static int batch_mapping = 1;
@@ -36,90 +34,9 @@ module_param(max_iotlb_entries, int, 0444);
 MODULE_PARM_DESC(max_iotlb_entries,
 		 "Maximum number of iotlb entries. 0 means unlimited. (default: 2048)");
 
-static char *macaddr;
-module_param(macaddr, charp, 0);
-MODULE_PARM_DESC(macaddr, "Ethernet MAC address");
-
-u8 macaddr_buf[ETH_ALEN];
-
-struct vdpasim_virtqueue {
-	struct vringh vring;
-	struct vringh_kiov in_iov;
-	struct vringh_kiov out_iov;
-	unsigned short head;
-	bool ready;
-	u64 desc_addr;
-	u64 device_addr;
-	u64 driver_addr;
-	u32 num;
-	void *private;
-	irqreturn_t (*cb)(void *data);
-};
-
 #define VDPASIM_QUEUE_ALIGN PAGE_SIZE
 #define VDPASIM_QUEUE_MAX 256
 #define VDPASIM_VENDOR_ID 0
-#define VDPASIM_VQ_NUM 0x2
-#define VDPASIM_NAME "vdpasim-netdev"
-
-#define VDPASIM_FEATURES	((1ULL << VIRTIO_F_ANY_LAYOUT) | \
-				 (1ULL << VIRTIO_F_VERSION_1)  | \
-				 (1ULL << VIRTIO_F_ACCESS_PLATFORM))
-
-#define VDPASIM_NET_FEATURES	(VDPASIM_FEATURES | \
-				 (1ULL << VIRTIO_NET_F_MAC))
-
-struct vdpasim;
-
-struct vdpasim_dev_attr {
-	u64 supported_features;
-	size_t config_size;
-	size_t buffer_size;
-	int nvqs;
-	u32 id;
-
-	work_func_t work_fn;
-	void (*get_config)(struct vdpasim *vdpasim, void *config);
-	void (*set_config)(struct vdpasim *vdpasim, const void *config);
-};
-
-/* State of each vdpasim device */
-struct vdpasim {
-	struct vdpa_device vdpa;
-	struct vdpasim_virtqueue *vqs;
-	struct work_struct work;
-	struct vdpasim_dev_attr dev_attr;
-	/* spinlock to synchronize virtqueue state */
-	spinlock_t lock;
-	/* virtio config according to device type */
-	void *config;
-	struct vhost_iotlb *iommu;
-	void *buffer;
-	u32 status;
-	u32 generation;
-	u64 features;
-	/* spinlock to synchronize iommu table */
-	spinlock_t iommu_lock;
-};
-
-/* TODO: cross-endian support */
-static inline bool vdpasim_is_little_endian(struct vdpasim *vdpasim)
-{
-	return virtio_legacy_is_little_endian() ||
-		(vdpasim->features & (1ULL << VIRTIO_F_VERSION_1));
-}
-
-static inline u16 vdpasim16_to_cpu(struct vdpasim *vdpasim, __virtio16 val)
-{
-	return __virtio16_to_cpu(vdpasim_is_little_endian(vdpasim), val);
-}
-
-static inline __virtio16 cpu_to_vdpasim16(struct vdpasim *vdpasim, u16 val)
-{
-	return __cpu_to_virtio16(vdpasim_is_little_endian(vdpasim), val);
-}
-
-static struct vdpasim *vdpasim_dev;
 
 static struct vdpasim *vdpa_to_sim(struct vdpa_device *vdpa)
 {
@@ -190,80 +107,6 @@ static void vdpasim_reset(struct vdpasim *vdpasim)
 	++vdpasim->generation;
 }
 
-static void vdpasim_net_work(struct work_struct *work)
-{
-	struct vdpasim *vdpasim = container_of(work, struct
-						 vdpasim, work);
-	struct vdpasim_virtqueue *txq = &vdpasim->vqs[1];
-	struct vdpasim_virtqueue *rxq = &vdpasim->vqs[0];
-	ssize_t read, write;
-	size_t total_write;
-	int pkts = 0;
-	int err;
-
-	spin_lock(&vdpasim->lock);
-
-	if (!(vdpasim->status & VIRTIO_CONFIG_S_DRIVER_OK))
-		goto out;
-
-	if (!txq->ready || !rxq->ready)
-		goto out;
-
-	while (true) {
-		total_write = 0;
-		err = vringh_getdesc_iotlb(&txq->vring, &txq->out_iov, NULL,
-					   &txq->head, GFP_ATOMIC);
-		if (err <= 0)
-			break;
-
-		err = vringh_getdesc_iotlb(&rxq->vring, NULL, &rxq->in_iov,
-					   &rxq->head, GFP_ATOMIC);
-		if (err <= 0) {
-			vringh_complete_iotlb(&txq->vring, txq->head, 0);
-			break;
-		}
-
-		while (true) {
-			read = vringh_iov_pull_iotlb(&txq->vring, &txq->out_iov,
-						     vdpasim->buffer,
-						     PAGE_SIZE);
-			if (read <= 0)
-				break;
-
-			write = vringh_iov_push_iotlb(&rxq->vring, &rxq->in_iov,
-						      vdpasim->buffer, read);
-			if (write <= 0)
-				break;
-
-			total_write += write;
-		}
-
-		/* Make sure data is wrote before advancing index */
-		smp_wmb();
-
-		vringh_complete_iotlb(&txq->vring, txq->head, 0);
-		vringh_complete_iotlb(&rxq->vring, rxq->head, total_write);
-
-		/* Make sure used is visible before rasing the interrupt. */
-		smp_wmb();
-
-		local_bh_disable();
-		if (vringh_need_notify_iotlb(&txq->vring) > 0)
-			vringh_notify(&txq->vring);
-		if (vringh_need_notify_iotlb(&rxq->vring) > 0)
-			vringh_notify(&rxq->vring);
-		local_bh_enable();
-
-		if (++pkts > 4) {
-			schedule_work(&vdpasim->work);
-			goto out;
-		}
-	}
-
-out:
-	spin_unlock(&vdpasim->lock);
-}
-
 static int dir_to_perm(enum dma_data_direction dir)
 {
 	int perm = -EFAULT;
@@ -379,7 +222,7 @@ static const struct dma_map_ops vdpasim_dma_ops = {
 static const struct vdpa_config_ops vdpasim_config_ops;
 static const struct vdpa_config_ops vdpasim_batch_config_ops;
 
-static struct vdpasim *vdpasim_create(struct vdpasim_dev_attr *dev_attr)
+struct vdpasim *vdpasim_create(struct vdpasim_dev_attr *dev_attr)
 {
 	const struct vdpa_config_ops *ops;
 	struct vdpasim *vdpasim;
@@ -424,23 +267,10 @@ static struct vdpasim *vdpasim_create(struct vdpasim_dev_attr *dev_attr)
 	if (!vdpasim->buffer)
 		goto err_iommu;
 
-	if (macaddr) {
-		mac_pton(macaddr, macaddr_buf);
-		if (!is_valid_ether_addr(macaddr_buf)) {
-			ret = -EADDRNOTAVAIL;
-			goto err_iommu;
-		}
-	} else {
-		eth_random_addr(macaddr_buf);
-	}
-
 	for (i = 0; i < dev_attr->nvqs; i++)
 		vringh_set_iotlb(&vdpasim->vqs[i].vring, vdpasim->iommu);
 
 	vdpasim->vdpa.dma_dev = dev;
-	ret = vdpa_register_device(&vdpasim->vdpa);
-	if (ret)
-		goto err_iommu;
 
 	return vdpasim;
 
@@ -449,6 +279,7 @@ static struct vdpasim *vdpasim_create(struct vdpasim_dev_attr *dev_attr)
 err_alloc:
 	return ERR_PTR(ret);
 }
+EXPORT_SYMBOL_GPL(vdpasim_create);
 
 static int vdpasim_set_vq_address(struct vdpa_device *vdpa, u16 idx,
 				  u64 desc_area, u64 driver_area,
@@ -769,46 +600,6 @@ static const struct vdpa_config_ops vdpasim_batch_config_ops = {
 	.free                   = vdpasim_free,
 };
 
-static void vdpasim_net_get_config(struct vdpasim *vdpasim, void *config)
-{
-	struct virtio_net_config *net_config =
-		(struct virtio_net_config *)config;
-
-	net_config->mtu = cpu_to_vdpasim16(vdpasim, 1500);
-	net_config->status = cpu_to_vdpasim16(vdpasim, VIRTIO_NET_S_LINK_UP);
-	memcpy(net_config->mac, macaddr_buf, ETH_ALEN);
-}
-
-static int __init vdpasim_dev_init(void)
-{
-	struct vdpasim_dev_attr dev_attr = {};
-
-	dev_attr.id = VIRTIO_ID_NET;
-	dev_attr.supported_features = VDPASIM_NET_FEATURES;
-	dev_attr.nvqs = VDPASIM_VQ_NUM;
-	dev_attr.config_size = sizeof(struct virtio_net_config);
-	dev_attr.get_config = vdpasim_net_get_config;
-	dev_attr.work_fn = vdpasim_net_work;
-	dev_attr.buffer_size = PAGE_SIZE;
-
-	vdpasim_dev = vdpasim_create(&dev_attr);
-
-	if (!IS_ERR(vdpasim_dev))
-		return 0;
-
-	return PTR_ERR(vdpasim_dev);
-}
-
-static void __exit vdpasim_dev_exit(void)
-{
-	struct vdpa_device *vdpa = &vdpasim_dev->vdpa;
-
-	vdpa_unregister_device(vdpa);
-}
-
-module_init(vdpasim_dev_init)
-module_exit(vdpasim_dev_exit)
-
 MODULE_VERSION(DRV_VERSION);
 MODULE_LICENSE(DRV_LICENSE);
 MODULE_AUTHOR(DRV_AUTHOR);
diff --git a/drivers/vdpa/vdpa_sim/vdpa_sim_net.c b/drivers/vdpa/vdpa_sim/vdpa_sim_net.c
new file mode 100644
index 000000000000..c10b6981fdab
--- /dev/null
+++ b/drivers/vdpa/vdpa_sim/vdpa_sim_net.c
@@ -0,0 +1,177 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * VDPA simulator for networking device.
+ *
+ * Copyright (c) 2020, Red Hat Inc. All rights reserved.
+ *     Author: Jason Wang <jasowang@redhat.com>
+ *
+ */
+
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/device.h>
+#include <linux/kernel.h>
+#include <linux/sched.h>
+#include <linux/etherdevice.h>
+#include <linux/vringh.h>
+#include <linux/vdpa.h>
+#include <uapi/linux/virtio_net.h>
+
+#include "vdpa_sim.h"
+
+#define DRV_VERSION  "0.1"
+#define DRV_AUTHOR   "Jason Wang <jasowang@redhat.com>"
+#define DRV_DESC     "vDPA Device Simulator for networking device"
+#define DRV_LICENSE  "GPL v2"
+
+#define VDPASIM_NET_FEATURES	(VDPASIM_FEATURES | \
+				 (1ULL << VIRTIO_NET_F_MAC))
+
+#define VDPASIM_NET_VQ_NUM	2
+
+static char *macaddr;
+module_param(macaddr, charp, 0);
+MODULE_PARM_DESC(macaddr, "Ethernet MAC address");
+
+u8 macaddr_buf[ETH_ALEN];
+
+static struct vdpasim *vdpasim_net_dev;
+
+static void vdpasim_net_work(struct work_struct *work)
+{
+	struct vdpasim *vdpasim = container_of(work, struct vdpasim, work);
+	struct vdpasim_virtqueue *txq = &vdpasim->vqs[1];
+	struct vdpasim_virtqueue *rxq = &vdpasim->vqs[0];
+	ssize_t read, write;
+	size_t total_write;
+	int pkts = 0;
+	int err;
+
+	spin_lock(&vdpasim->lock);
+
+	if (!(vdpasim->status & VIRTIO_CONFIG_S_DRIVER_OK))
+		goto out;
+
+	if (!txq->ready || !rxq->ready)
+		goto out;
+
+	while (true) {
+		total_write = 0;
+		err = vringh_getdesc_iotlb(&txq->vring, &txq->out_iov, NULL,
+					   &txq->head, GFP_ATOMIC);
+		if (err <= 0)
+			break;
+
+		err = vringh_getdesc_iotlb(&rxq->vring, NULL, &rxq->in_iov,
+					   &rxq->head, GFP_ATOMIC);
+		if (err <= 0) {
+			vringh_complete_iotlb(&txq->vring, txq->head, 0);
+			break;
+		}
+
+		while (true) {
+			read = vringh_iov_pull_iotlb(&txq->vring, &txq->out_iov,
+						     vdpasim->buffer,
+						     PAGE_SIZE);
+			if (read <= 0)
+				break;
+
+			write = vringh_iov_push_iotlb(&rxq->vring, &rxq->in_iov,
+						      vdpasim->buffer, read);
+			if (write <= 0)
+				break;
+
+			total_write += write;
+		}
+
+		/* Make sure data is wrote before advancing index */
+		smp_wmb();
+
+		vringh_complete_iotlb(&txq->vring, txq->head, 0);
+		vringh_complete_iotlb(&rxq->vring, rxq->head, total_write);
+
+		/* Make sure used is visible before rasing the interrupt. */
+		smp_wmb();
+
+		local_bh_disable();
+		if (vringh_need_notify_iotlb(&txq->vring) > 0)
+			vringh_notify(&txq->vring);
+		if (vringh_need_notify_iotlb(&rxq->vring) > 0)
+			vringh_notify(&rxq->vring);
+		local_bh_enable();
+
+		if (++pkts > 4) {
+			schedule_work(&vdpasim->work);
+			goto out;
+		}
+	}
+
+out:
+	spin_unlock(&vdpasim->lock);
+}
+
+static void vdpasim_net_get_config(struct vdpasim *vdpasim, void *config)
+{
+	struct virtio_net_config *net_config =
+		(struct virtio_net_config *)config;
+
+	net_config->mtu = cpu_to_vdpasim16(vdpasim, 1500);
+	net_config->status = cpu_to_vdpasim16(vdpasim, VIRTIO_NET_S_LINK_UP);
+	memcpy(net_config->mac, macaddr_buf, ETH_ALEN);
+}
+
+static int __init vdpasim_net_init(void)
+{
+	struct vdpasim_dev_attr dev_attr = {};
+	int ret;
+
+	if (macaddr) {
+		mac_pton(macaddr, macaddr_buf);
+		if (!is_valid_ether_addr(macaddr_buf)) {
+			ret = -EADDRNOTAVAIL;
+			goto out;
+		}
+	} else {
+		eth_random_addr(macaddr_buf);
+	}
+
+	dev_attr.id = VIRTIO_ID_NET;
+	dev_attr.supported_features = VDPASIM_NET_FEATURES;
+	dev_attr.nvqs = VDPASIM_NET_VQ_NUM;
+	dev_attr.config_size = sizeof(struct virtio_net_config);
+	dev_attr.get_config = vdpasim_net_get_config;
+	dev_attr.work_fn = vdpasim_net_work;
+	dev_attr.buffer_size = PAGE_SIZE;
+
+	vdpasim_net_dev = vdpasim_create(&dev_attr);
+	if (IS_ERR(vdpasim_net_dev)) {
+		ret = PTR_ERR(vdpasim_net_dev);
+		goto out;
+	}
+
+	ret = vdpa_register_device(&vdpasim_net_dev->vdpa);
+	if (ret)
+		goto put_dev;
+
+	return 0;
+
+put_dev:
+	put_device(&vdpasim_net_dev->vdpa.dev);
+out:
+	return ret;
+}
+
+static void __exit vdpasim_net_exit(void)
+{
+	struct vdpa_device *vdpa = &vdpasim_net_dev->vdpa;
+
+	vdpa_unregister_device(vdpa);
+}
+
+module_init(vdpasim_net_init);
+module_exit(vdpasim_net_exit);
+
+MODULE_VERSION(DRV_VERSION);
+MODULE_LICENSE(DRV_LICENSE);
+MODULE_AUTHOR(DRV_AUTHOR);
+MODULE_DESCRIPTION(DRV_DESC);
diff --git a/drivers/vdpa/Kconfig b/drivers/vdpa/Kconfig
index 2c892e890b9e..92a6396f8a73 100644
--- a/drivers/vdpa/Kconfig
+++ b/drivers/vdpa/Kconfig
@@ -9,15 +9,20 @@ menuconfig VDPA
 if VDPA
 
 config VDPA_SIM
-	tristate "vDPA device simulator"
+	tristate "vDPA device simulator core"
 	depends on RUNTIME_TESTING_MENU && HAS_DMA
 	select DMA_OPS
 	select VHOST_RING
+	help
+	  Enable this module to support vDPA device simulators. These devices
+	  are used for testing, prototyping and development of vDPA.
+
+config VDPA_SIM_NET
+	tristate "vDPA simulator for networking device"
+	depends on VDPA_SIM
 	select GENERIC_NET_UTILS
 	help
-	  vDPA networking device simulator which loop TX traffic back
-	  to RX. This device is used for testing, prototyping and
-	  development of vDPA.
+	  vDPA networking device simulator which loops TX traffic back to RX.
 
 config IFCVF
 	tristate "Intel IFC VF vDPA driver"
diff --git a/drivers/vdpa/vdpa_sim/Makefile b/drivers/vdpa/vdpa_sim/Makefile
index b40278f65e04..79d4536d347e 100644
--- a/drivers/vdpa/vdpa_sim/Makefile
+++ b/drivers/vdpa/vdpa_sim/Makefile
@@ -1,2 +1,3 @@
 # SPDX-License-Identifier: GPL-2.0
 obj-$(CONFIG_VDPA_SIM) += vdpa_sim.o
+obj-$(CONFIG_VDPA_SIM_NET) += vdpa_sim_net.o
-- 
2.26.2

[PATCH v4 18/18] vdpa: split vdpasim to core and net modules

[Stefano Garzarella]

From: Max Gurtovoy <mgurtovoy@nvidia.com>

Introduce new vdpa_sim_net and vdpa_sim (core) drivers. This is a
preparation for adding a vdpa simulator module for block devices.

Signed-off-by: Max Gurtovoy <mgurtovoy@nvidia.com>
[sgarzare: various cleanups/fixes]
Acked-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: Stefano Garzarella <sgarzare@redhat.com>
---
v4:
- Fixed typo (s/loop/loops) [Randy]
- Fixed #include [Randy]

v2:
- Fixed "warning: variable 'dev' is used uninitialized" reported by
  'kernel test robot' and Dan Carpenter
- rebased on top of other changes (dev_attr, get_config(), notify(), etc.)
- left batch_mapping module parameter in the core [Jason]

v1:
- Removed unused headers
- Removed empty module_init() module_exit()
- Moved vdpasim_is_little_endian() in vdpa_sim.h
- Moved vdpasim16_to_cpu/cpu_to_vdpasim16() in vdpa_sim.h
- Added vdpasim*_to_cpu/cpu_to_vdpasim*() also for 32 and 64
- Replaced 'select VDPA_SIM' with 'depends on VDPA_SIM' since selected
  option can not depend on other [Jason]
---
 drivers/vdpa/vdpa_sim/vdpa_sim.h     | 105 +++++++++++++
 drivers/vdpa/vdpa_sim/vdpa_sim.c     | 221 +--------------------------
 drivers/vdpa/vdpa_sim/vdpa_sim_net.c | 177 +++++++++++++++++++++
 drivers/vdpa/Kconfig                 |  13 +-
 drivers/vdpa/vdpa_sim/Makefile       |   1 +
 5 files changed, 298 insertions(+), 219 deletions(-)
 create mode 100644 drivers/vdpa/vdpa_sim/vdpa_sim.h
 create mode 100644 drivers/vdpa/vdpa_sim/vdpa_sim_net.c

diff --git a/drivers/vdpa/vdpa_sim/vdpa_sim.h b/drivers/vdpa/vdpa_sim/vdpa_sim.h
new file mode 100644
index 000000000000..b02142293d5b
--- /dev/null
+++ b/drivers/vdpa/vdpa_sim/vdpa_sim.h
@@ -0,0 +1,105 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * Copyright (c) 2020, Red Hat Inc. All rights reserved.
+ */
+
+#ifndef _VDPA_SIM_H
+#define _VDPA_SIM_H
+
+#include <linux/vringh.h>
+#include <linux/vdpa.h>
+#include <linux/virtio_byteorder.h>
+#include <linux/vhost_iotlb.h>
+#include <uapi/linux/virtio_config.h>
+
+#define VDPASIM_FEATURES	((1ULL << VIRTIO_F_ANY_LAYOUT) | \
+				 (1ULL << VIRTIO_F_VERSION_1)  | \
+				 (1ULL << VIRTIO_F_ACCESS_PLATFORM))
+
+struct vdpasim;
+
+struct vdpasim_virtqueue {
+	struct vringh vring;
+	struct vringh_kiov in_iov;
+	struct vringh_kiov out_iov;
+	unsigned short head;
+	bool ready;
+	u64 desc_addr;
+	u64 device_addr;
+	u64 driver_addr;
+	u32 num;
+	void *private;
+	irqreturn_t (*cb)(void *data);
+};
+
+struct vdpasim_dev_attr {
+	u64 supported_features;
+	size_t config_size;
+	size_t buffer_size;
+	int nvqs;
+	u32 id;
+
+	work_func_t work_fn;
+	void (*get_config)(struct vdpasim *vdpasim, void *config);
+	void (*set_config)(struct vdpasim *vdpasim, const void *config);
+};
+
+/* State of each vdpasim device */
+struct vdpasim {
+	struct vdpa_device vdpa;
+	struct vdpasim_virtqueue *vqs;
+	struct work_struct work;
+	struct vdpasim_dev_attr dev_attr;
+	/* spinlock to synchronize virtqueue state */
+	spinlock_t lock;
+	/* virtio config according to device type */
+	void *config;
+	struct vhost_iotlb *iommu;
+	void *buffer;
+	u32 status;
+	u32 generation;
+	u64 features;
+	/* spinlock to synchronize iommu table */
+	spinlock_t iommu_lock;
+};
+
+struct vdpasim *vdpasim_create(struct vdpasim_dev_attr *attr);
+
+/* TODO: cross-endian support */
+static inline bool vdpasim_is_little_endian(struct vdpasim *vdpasim)
+{
+	return virtio_legacy_is_little_endian() ||
+		(vdpasim->features & (1ULL << VIRTIO_F_VERSION_1));
+}
+
+static inline u16 vdpasim16_to_cpu(struct vdpasim *vdpasim, __virtio16 val)
+{
+	return __virtio16_to_cpu(vdpasim_is_little_endian(vdpasim), val);
+}
+
+static inline __virtio16 cpu_to_vdpasim16(struct vdpasim *vdpasim, u16 val)
+{
+	return __cpu_to_virtio16(vdpasim_is_little_endian(vdpasim), val);
+}
+
+static inline u32 vdpasim32_to_cpu(struct vdpasim *vdpasim, __virtio32 val)
+{
+	return __virtio32_to_cpu(vdpasim_is_little_endian(vdpasim), val);
+}
+
+static inline __virtio32 cpu_to_vdpasim32(struct vdpasim *vdpasim, u32 val)
+{
+	return __cpu_to_virtio32(vdpasim_is_little_endian(vdpasim), val);
+}
+
+static inline u64 vdpasim64_to_cpu(struct vdpasim *vdpasim, __virtio64 val)
+{
+	return __virtio64_to_cpu(vdpasim_is_little_endian(vdpasim), val);
+}
+
+static inline __virtio64 cpu_to_vdpasim64(struct vdpasim *vdpasim, u64 val)
+{
+	return __cpu_to_virtio64(vdpasim_is_little_endian(vdpasim), val);
+}
+
+#endif
diff --git a/drivers/vdpa/vdpa_sim/vdpa_sim.c b/drivers/vdpa/vdpa_sim/vdpa_sim.c
index 875e42390a13..b3fcc67bfdf0 100644
--- a/drivers/vdpa/vdpa_sim/vdpa_sim.c
+++ b/drivers/vdpa/vdpa_sim/vdpa_sim.c
@@ -1,6 +1,6 @@
 // SPDX-License-Identifier: GPL-2.0-only
 /*
- * VDPA networking device simulator.
+ * VDPA device simulator core.
  *
  * Copyright (c) 2020, Red Hat Inc. All rights reserved.
  *     Author: Jason Wang <jasowang@redhat.com>
@@ -14,17 +14,15 @@
 #include <linux/slab.h>
 #include <linux/sched.h>
 #include <linux/dma-map-ops.h>
-#include <linux/etherdevice.h>
 #include <linux/vringh.h>
 #include <linux/vdpa.h>
-#include <linux/virtio_byteorder.h>
 #include <linux/vhost_iotlb.h>
-#include <uapi/linux/virtio_config.h>
-#include <uapi/linux/virtio_net.h>
+
+#include "vdpa_sim.h"
 
 #define DRV_VERSION  "0.1"
 #define DRV_AUTHOR   "Jason Wang <jasowang@redhat.com>"
-#define DRV_DESC     "vDPA Device Simulator"
+#define DRV_DESC     "vDPA Device Simulator core"
 #define DRV_LICENSE  "GPL v2"
 
 static int batch_mapping = 1;
@@ -36,90 +34,9 @@ module_param(max_iotlb_entries, int, 0444);
 MODULE_PARM_DESC(max_iotlb_entries,
 		 "Maximum number of iotlb entries. 0 means unlimited. (default: 2048)");
 
-static char *macaddr;
-module_param(macaddr, charp, 0);
-MODULE_PARM_DESC(macaddr, "Ethernet MAC address");
-
-u8 macaddr_buf[ETH_ALEN];
-
-struct vdpasim_virtqueue {
-	struct vringh vring;
-	struct vringh_kiov in_iov;
-	struct vringh_kiov out_iov;
-	unsigned short head;
-	bool ready;
-	u64 desc_addr;
-	u64 device_addr;
-	u64 driver_addr;
-	u32 num;
-	void *private;
-	irqreturn_t (*cb)(void *data);
-};
-
 #define VDPASIM_QUEUE_ALIGN PAGE_SIZE
 #define VDPASIM_QUEUE_MAX 256
 #define VDPASIM_VENDOR_ID 0
-#define VDPASIM_VQ_NUM 0x2
-#define VDPASIM_NAME "vdpasim-netdev"
-
-#define VDPASIM_FEATURES	((1ULL << VIRTIO_F_ANY_LAYOUT) | \
-				 (1ULL << VIRTIO_F_VERSION_1)  | \
-				 (1ULL << VIRTIO_F_ACCESS_PLATFORM))
-
-#define VDPASIM_NET_FEATURES	(VDPASIM_FEATURES | \
-				 (1ULL << VIRTIO_NET_F_MAC))
-
-struct vdpasim;
-
-struct vdpasim_dev_attr {
-	u64 supported_features;
-	size_t config_size;
-	size_t buffer_size;
-	int nvqs;
-	u32 id;
-
-	work_func_t work_fn;
-	void (*get_config)(struct vdpasim *vdpasim, void *config);
-	void (*set_config)(struct vdpasim *vdpasim, const void *config);
-};
-
-/* State of each vdpasim device */
-struct vdpasim {
-	struct vdpa_device vdpa;
-	struct vdpasim_virtqueue *vqs;
-	struct work_struct work;
-	struct vdpasim_dev_attr dev_attr;
-	/* spinlock to synchronize virtqueue state */
-	spinlock_t lock;
-	/* virtio config according to device type */
-	void *config;
-	struct vhost_iotlb *iommu;
-	void *buffer;
-	u32 status;
-	u32 generation;
-	u64 features;
-	/* spinlock to synchronize iommu table */
-	spinlock_t iommu_lock;
-};
-
-/* TODO: cross-endian support */
-static inline bool vdpasim_is_little_endian(struct vdpasim *vdpasim)
-{
-	return virtio_legacy_is_little_endian() ||
-		(vdpasim->features & (1ULL << VIRTIO_F_VERSION_1));
-}
-
-static inline u16 vdpasim16_to_cpu(struct vdpasim *vdpasim, __virtio16 val)
-{
-	return __virtio16_to_cpu(vdpasim_is_little_endian(vdpasim), val);
-}
-
-static inline __virtio16 cpu_to_vdpasim16(struct vdpasim *vdpasim, u16 val)
-{
-	return __cpu_to_virtio16(vdpasim_is_little_endian(vdpasim), val);
-}
-
-static struct vdpasim *vdpasim_dev;
 
 static struct vdpasim *vdpa_to_sim(struct vdpa_device *vdpa)
 {
@@ -190,80 +107,6 @@ static void vdpasim_reset(struct vdpasim *vdpasim)
 	++vdpasim->generation;
 }
 
-static void vdpasim_net_work(struct work_struct *work)
-{
-	struct vdpasim *vdpasim = container_of(work, struct
-						 vdpasim, work);
-	struct vdpasim_virtqueue *txq = &vdpasim->vqs[1];
-	struct vdpasim_virtqueue *rxq = &vdpasim->vqs[0];
-	ssize_t read, write;
-	size_t total_write;
-	int pkts = 0;
-	int err;
-
-	spin_lock(&vdpasim->lock);
-
-	if (!(vdpasim->status & VIRTIO_CONFIG_S_DRIVER_OK))
-		goto out;
-
-	if (!txq->ready || !rxq->ready)
-		goto out;
-
-	while (true) {
-		total_write = 0;
-		err = vringh_getdesc_iotlb(&txq->vring, &txq->out_iov, NULL,
-					   &txq->head, GFP_ATOMIC);
-		if (err <= 0)
-			break;
-
-		err = vringh_getdesc_iotlb(&rxq->vring, NULL, &rxq->in_iov,
-					   &rxq->head, GFP_ATOMIC);
-		if (err <= 0) {
-			vringh_complete_iotlb(&txq->vring, txq->head, 0);
-			break;
-		}
-
-		while (true) {
-			read = vringh_iov_pull_iotlb(&txq->vring, &txq->out_iov,
-						     vdpasim->buffer,
-						     PAGE_SIZE);
-			if (read <= 0)
-				break;
-
-			write = vringh_iov_push_iotlb(&rxq->vring, &rxq->in_iov,
-						      vdpasim->buffer, read);
-			if (write <= 0)
-				break;
-
-			total_write += write;
-		}
-
-		/* Make sure data is wrote before advancing index */
-		smp_wmb();
-
-		vringh_complete_iotlb(&txq->vring, txq->head, 0);
-		vringh_complete_iotlb(&rxq->vring, rxq->head, total_write);
-
-		/* Make sure used is visible before rasing the interrupt. */
-		smp_wmb();
-
-		local_bh_disable();
-		if (vringh_need_notify_iotlb(&txq->vring) > 0)
-			vringh_notify(&txq->vring);
-		if (vringh_need_notify_iotlb(&rxq->vring) > 0)
-			vringh_notify(&rxq->vring);
-		local_bh_enable();
-
-		if (++pkts > 4) {
-			schedule_work(&vdpasim->work);
-			goto out;
-		}
-	}
-
-out:
-	spin_unlock(&vdpasim->lock);
-}
-
 static int dir_to_perm(enum dma_data_direction dir)
 {
 	int perm = -EFAULT;
@@ -379,7 +222,7 @@ static const struct dma_map_ops vdpasim_dma_ops = {
 static const struct vdpa_config_ops vdpasim_config_ops;
 static const struct vdpa_config_ops vdpasim_batch_config_ops;
 
-static struct vdpasim *vdpasim_create(struct vdpasim_dev_attr *dev_attr)
+struct vdpasim *vdpasim_create(struct vdpasim_dev_attr *dev_attr)
 {
 	const struct vdpa_config_ops *ops;
 	struct vdpasim *vdpasim;
@@ -424,23 +267,10 @@ static struct vdpasim *vdpasim_create(struct vdpasim_dev_attr *dev_attr)
 	if (!vdpasim->buffer)
 		goto err_iommu;
 
-	if (macaddr) {
-		mac_pton(macaddr, macaddr_buf);
-		if (!is_valid_ether_addr(macaddr_buf)) {
-			ret = -EADDRNOTAVAIL;
-			goto err_iommu;
-		}
-	} else {
-		eth_random_addr(macaddr_buf);
-	}
-
 	for (i = 0; i < dev_attr->nvqs; i++)
 		vringh_set_iotlb(&vdpasim->vqs[i].vring, vdpasim->iommu);
 
 	vdpasim->vdpa.dma_dev = dev;
-	ret = vdpa_register_device(&vdpasim->vdpa);
-	if (ret)
-		goto err_iommu;
 
 	return vdpasim;
 
@@ -449,6 +279,7 @@ static struct vdpasim *vdpasim_create(struct vdpasim_dev_attr *dev_attr)
 err_alloc:
 	return ERR_PTR(ret);
 }
+EXPORT_SYMBOL_GPL(vdpasim_create);
 
 static int vdpasim_set_vq_address(struct vdpa_device *vdpa, u16 idx,
 				  u64 desc_area, u64 driver_area,
@@ -769,46 +600,6 @@ static const struct vdpa_config_ops vdpasim_batch_config_ops = {
 	.free                   = vdpasim_free,
 };
 
-static void vdpasim_net_get_config(struct vdpasim *vdpasim, void *config)
-{
-	struct virtio_net_config *net_config =
-		(struct virtio_net_config *)config;
-
-	net_config->mtu = cpu_to_vdpasim16(vdpasim, 1500);
-	net_config->status = cpu_to_vdpasim16(vdpasim, VIRTIO_NET_S_LINK_UP);
-	memcpy(net_config->mac, macaddr_buf, ETH_ALEN);
-}
-
-static int __init vdpasim_dev_init(void)
-{
-	struct vdpasim_dev_attr dev_attr = {};
-
-	dev_attr.id = VIRTIO_ID_NET;
-	dev_attr.supported_features = VDPASIM_NET_FEATURES;
-	dev_attr.nvqs = VDPASIM_VQ_NUM;
-	dev_attr.config_size = sizeof(struct virtio_net_config);
-	dev_attr.get_config = vdpasim_net_get_config;
-	dev_attr.work_fn = vdpasim_net_work;
-	dev_attr.buffer_size = PAGE_SIZE;
-
-	vdpasim_dev = vdpasim_create(&dev_attr);
-
-	if (!IS_ERR(vdpasim_dev))
-		return 0;
-
-	return PTR_ERR(vdpasim_dev);
-}
-
-static void __exit vdpasim_dev_exit(void)
-{
-	struct vdpa_device *vdpa = &vdpasim_dev->vdpa;
-
-	vdpa_unregister_device(vdpa);
-}
-
-module_init(vdpasim_dev_init)
-module_exit(vdpasim_dev_exit)
-
 MODULE_VERSION(DRV_VERSION);
 MODULE_LICENSE(DRV_LICENSE);
 MODULE_AUTHOR(DRV_AUTHOR);
diff --git a/drivers/vdpa/vdpa_sim/vdpa_sim_net.c b/drivers/vdpa/vdpa_sim/vdpa_sim_net.c
new file mode 100644
index 000000000000..c10b6981fdab
--- /dev/null
+++ b/drivers/vdpa/vdpa_sim/vdpa_sim_net.c
@@ -0,0 +1,177 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * VDPA simulator for networking device.
+ *
+ * Copyright (c) 2020, Red Hat Inc. All rights reserved.
+ *     Author: Jason Wang <jasowang@redhat.com>
+ *
+ */
+
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/device.h>
+#include <linux/kernel.h>
+#include <linux/sched.h>
+#include <linux/etherdevice.h>
+#include <linux/vringh.h>
+#include <linux/vdpa.h>
+#include <uapi/linux/virtio_net.h>
+
+#include "vdpa_sim.h"
+
+#define DRV_VERSION  "0.1"
+#define DRV_AUTHOR   "Jason Wang <jasowang@redhat.com>"
+#define DRV_DESC     "vDPA Device Simulator for networking device"
+#define DRV_LICENSE  "GPL v2"
+
+#define VDPASIM_NET_FEATURES	(VDPASIM_FEATURES | \
+				 (1ULL << VIRTIO_NET_F_MAC))
+
+#define VDPASIM_NET_VQ_NUM	2
+
+static char *macaddr;
+module_param(macaddr, charp, 0);
+MODULE_PARM_DESC(macaddr, "Ethernet MAC address");
+
+u8 macaddr_buf[ETH_ALEN];
+
+static struct vdpasim *vdpasim_net_dev;
+
+static void vdpasim_net_work(struct work_struct *work)
+{
+	struct vdpasim *vdpasim = container_of(work, struct vdpasim, work);
+	struct vdpasim_virtqueue *txq = &vdpasim->vqs[1];
+	struct vdpasim_virtqueue *rxq = &vdpasim->vqs[0];
+	ssize_t read, write;
+	size_t total_write;
+	int pkts = 0;
+	int err;
+
+	spin_lock(&vdpasim->lock);
+
+	if (!(vdpasim->status & VIRTIO_CONFIG_S_DRIVER_OK))
+		goto out;
+
+	if (!txq->ready || !rxq->ready)
+		goto out;
+
+	while (true) {
+		total_write = 0;
+		err = vringh_getdesc_iotlb(&txq->vring, &txq->out_iov, NULL,
+					   &txq->head, GFP_ATOMIC);
+		if (err <= 0)
+			break;
+
+		err = vringh_getdesc_iotlb(&rxq->vring, NULL, &rxq->in_iov,
+					   &rxq->head, GFP_ATOMIC);
+		if (err <= 0) {
+			vringh_complete_iotlb(&txq->vring, txq->head, 0);
+			break;
+		}
+
+		while (true) {
+			read = vringh_iov_pull_iotlb(&txq->vring, &txq->out_iov,
+						     vdpasim->buffer,
+						     PAGE_SIZE);
+			if (read <= 0)
+				break;
+
+			write = vringh_iov_push_iotlb(&rxq->vring, &rxq->in_iov,
+						      vdpasim->buffer, read);
+			if (write <= 0)
+				break;
+
+			total_write += write;
+		}
+
+		/* Make sure data is wrote before advancing index */
+		smp_wmb();
+
+		vringh_complete_iotlb(&txq->vring, txq->head, 0);
+		vringh_complete_iotlb(&rxq->vring, rxq->head, total_write);
+
+		/* Make sure used is visible before rasing the interrupt. */
+		smp_wmb();
+
+		local_bh_disable();
+		if (vringh_need_notify_iotlb(&txq->vring) > 0)
+			vringh_notify(&txq->vring);
+		if (vringh_need_notify_iotlb(&rxq->vring) > 0)
+			vringh_notify(&rxq->vring);
+		local_bh_enable();
+
+		if (++pkts > 4) {
+			schedule_work(&vdpasim->work);
+			goto out;
+		}
+	}
+
+out:
+	spin_unlock(&vdpasim->lock);
+}
+
+static void vdpasim_net_get_config(struct vdpasim *vdpasim, void *config)
+{
+	struct virtio_net_config *net_config =
+		(struct virtio_net_config *)config;
+
+	net_config->mtu = cpu_to_vdpasim16(vdpasim, 1500);
+	net_config->status = cpu_to_vdpasim16(vdpasim, VIRTIO_NET_S_LINK_UP);
+	memcpy(net_config->mac, macaddr_buf, ETH_ALEN);
+}
+
+static int __init vdpasim_net_init(void)
+{
+	struct vdpasim_dev_attr dev_attr = {};
+	int ret;
+
+	if (macaddr) {
+		mac_pton(macaddr, macaddr_buf);
+		if (!is_valid_ether_addr(macaddr_buf)) {
+			ret = -EADDRNOTAVAIL;
+			goto out;
+		}
+	} else {
+		eth_random_addr(macaddr_buf);
+	}
+
+	dev_attr.id = VIRTIO_ID_NET;
+	dev_attr.supported_features = VDPASIM_NET_FEATURES;
+	dev_attr.nvqs = VDPASIM_NET_VQ_NUM;
+	dev_attr.config_size = sizeof(struct virtio_net_config);
+	dev_attr.get_config = vdpasim_net_get_config;
+	dev_attr.work_fn = vdpasim_net_work;
+	dev_attr.buffer_size = PAGE_SIZE;
+
+	vdpasim_net_dev = vdpasim_create(&dev_attr);
+	if (IS_ERR(vdpasim_net_dev)) {
+		ret = PTR_ERR(vdpasim_net_dev);
+		goto out;
+	}
+
+	ret = vdpa_register_device(&vdpasim_net_dev->vdpa);
+	if (ret)
+		goto put_dev;
+
+	return 0;
+
+put_dev:
+	put_device(&vdpasim_net_dev->vdpa.dev);
+out:
+	return ret;
+}
+
+static void __exit vdpasim_net_exit(void)
+{
+	struct vdpa_device *vdpa = &vdpasim_net_dev->vdpa;
+
+	vdpa_unregister_device(vdpa);
+}
+
+module_init(vdpasim_net_init);
+module_exit(vdpasim_net_exit);
+
+MODULE_VERSION(DRV_VERSION);
+MODULE_LICENSE(DRV_LICENSE);
+MODULE_AUTHOR(DRV_AUTHOR);
+MODULE_DESCRIPTION(DRV_DESC);
diff --git a/drivers/vdpa/Kconfig b/drivers/vdpa/Kconfig
index 2c892e890b9e..92a6396f8a73 100644
--- a/drivers/vdpa/Kconfig
+++ b/drivers/vdpa/Kconfig
@@ -9,15 +9,20 @@ menuconfig VDPA
 if VDPA
 
 config VDPA_SIM
-	tristate "vDPA device simulator"
+	tristate "vDPA device simulator core"
 	depends on RUNTIME_TESTING_MENU && HAS_DMA
 	select DMA_OPS
 	select VHOST_RING
+	help
+	  Enable this module to support vDPA device simulators. These devices
+	  are used for testing, prototyping and development of vDPA.
+
+config VDPA_SIM_NET
+	tristate "vDPA simulator for networking device"
+	depends on VDPA_SIM
 	select GENERIC_NET_UTILS
 	help
-	  vDPA networking device simulator which loop TX traffic back
-	  to RX. This device is used for testing, prototyping and
-	  development of vDPA.
+	  vDPA networking device simulator which loops TX traffic back to RX.
 
 config IFCVF
 	tristate "Intel IFC VF vDPA driver"
diff --git a/drivers/vdpa/vdpa_sim/Makefile b/drivers/vdpa/vdpa_sim/Makefile
index b40278f65e04..79d4536d347e 100644
--- a/drivers/vdpa/vdpa_sim/Makefile
+++ b/drivers/vdpa/vdpa_sim/Makefile
@@ -1,2 +1,3 @@
 # SPDX-License-Identifier: GPL-2.0
 obj-$(CONFIG_VDPA_SIM) += vdpa_sim.o
+obj-$(CONFIG_VDPA_SIM_NET) += vdpa_sim_net.o
-- 
2.26.2

_______________________________________________
Virtualization mailing list
Virtualization@lists.linux-foundation.org
https://lists.linuxfoundation.org/mailman/listinfo/virtualization