[PATCH 0/3] arm64: dts: renesas: r8a779a0: Add FCP and VSP support

[PATCH 0/3] arm64: dts: renesas: r8a779a0: Add FCP and VSP support

[Kieran Bingham]

Provide DT nodes for the FCPVD, and VSP on the V3U.

Kieran Bingham (3):
  arm64: dts: renesas: r8a779a0: Add FCPVD support
  arm64: dts: renesas: r8a779a0: Add VSPD support
  arm64: dts: renesas: r8a779a0: Add VSPX support

 arch/arm64/boot/dts/renesas/r8a779a0.dtsi | 74 +++++++++++++++++++++++
 1 file changed, 74 insertions(+)

-- 
2.25.1

[PATCH 1/3] arm64: dts: renesas: r8a779a0: Add FCPVD support

[Kieran Bingham]

Provide FCPVD support for the V3U.

Signed-off-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com>
---
 arch/arm64/boot/dts/renesas/r8a779a0.dtsi | 16 ++++++++++++++++
 1 file changed, 16 insertions(+)

diff --git a/arch/arm64/boot/dts/renesas/r8a779a0.dtsi b/arch/arm64/boot/dts/renesas/r8a779a0.dtsi
index 6cf77ce9aa93..ba6fbbd8710e 100644
--- a/arch/arm64/boot/dts/renesas/r8a779a0.dtsi
+++ b/arch/arm64/boot/dts/renesas/r8a779a0.dtsi
@@ -117,6 +117,22 @@ gic: interrupt-controller@f1000000 {
 			power-domains = <&sysc R8A779A0_PD_ALWAYS_ON>;
 		};
 
+		fcpvd0: fcp@fea10000 {
+			compatible = "renesas,fcpv";
+			reg = <0 0xfea10000 0 0x200>;
+			clocks = <&cpg CPG_MOD 508>;
+			power-domains = <&sysc R8A779A0_PD_ALWAYS_ON>;
+			resets = <&cpg 508>;
+		};
+
+		fcpvd1: fcp@fea11000 {
+			compatible = "renesas,fcpv";
+			reg = <0 0xfea2f000 0 0x200>;
+			clocks = <&cpg CPG_MOD 509>;
+			power-domains = <&sysc R8A779A0_PD_ALWAYS_ON>;
+			resets = <&cpg 509>;
+		};
+
 		prr: chipid@fff00044 {
 			compatible = "renesas,prr";
 			reg = <0 0xfff00044 0 4>;
-- 
2.25.1

[PATCH 2/3] arm64: dts: renesas: r8a779a0: Add VSPD support

[Kieran Bingham]

Provide VSPD support on the V3U.

Signed-off-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com>
---
 arch/arm64/boot/dts/renesas/r8a779a0.dtsi | 22 ++++++++++++++++++++++
 1 file changed, 22 insertions(+)

diff --git a/arch/arm64/boot/dts/renesas/r8a779a0.dtsi b/arch/arm64/boot/dts/renesas/r8a779a0.dtsi
index ba6fbbd8710e..a23b4ce2e5f4 100644
--- a/arch/arm64/boot/dts/renesas/r8a779a0.dtsi
+++ b/arch/arm64/boot/dts/renesas/r8a779a0.dtsi
@@ -133,6 +133,28 @@ fcpvd1: fcp@fea11000 {
 			resets = <&cpg 509>;
 		};
 
+		vspd0: vsp@fea20000 {
+			compatible = "renesas,vsp2";
+			reg = <0 0xfea20000 0 0x5000>;
+			interrupts = <GIC_SPI 128 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 830>;
+			power-domains = <&sysc R8A779A0_PD_ALWAYS_ON>;
+			resets = <&cpg 830>;
+
+			renesas,fcp = <&fcpvd0>;
+		};
+
+		vspd1: vsp@fea28000 {
+			compatible = "renesas,vsp2";
+			reg = <0 0xfea28000 0 0x5000>;
+			interrupts = <GIC_SPI 129 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 831>;
+			power-domains = <&sysc R8A779A0_PD_ALWAYS_ON>;
+			resets = <&cpg 831>;
+
+			renesas,fcp = <&fcpvd1>;
+		};
+
 		prr: chipid@fff00044 {
 			compatible = "renesas,prr";
 			reg = <0 0xfff00044 0 4>;
-- 
2.25.1

[PATCH 3/3] arm64: dts: renesas: r8a779a0: Add VSPX support

[Kieran Bingham]

Provide VSP-X support on the V3U.

Signed-off-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com>
---
The FCPvX is not yet connected here, as the clock domains are unclear
for that.

The register mapping space is kept at 0x8000 for now as this is a bit of
an unknown entity (with the IIF) so playing it safe and keeping the same
value as the BSP (0x8000) - however with no CLU on these nodes, I expect
the register space to be suitable to be mapped at length 0x4000.

 arch/arm64/boot/dts/renesas/r8a779a0.dtsi | 36 +++++++++++++++++++++++
 1 file changed, 36 insertions(+)

diff --git a/arch/arm64/boot/dts/renesas/r8a779a0.dtsi b/arch/arm64/boot/dts/renesas/r8a779a0.dtsi
index a23b4ce2e5f4..4fb28df5cd6b 100644
--- a/arch/arm64/boot/dts/renesas/r8a779a0.dtsi
+++ b/arch/arm64/boot/dts/renesas/r8a779a0.dtsi
@@ -155,6 +155,42 @@ vspd1: vsp@fea28000 {
 			renesas,fcp = <&fcpvd1>;
 		};
 
+		vspx0: vsp@fedd0000 {
+			compatible = "renesas,vsp2";
+			reg = <0 0xfedd0000 0 0x8000>;
+			interrupts = <GIC_SPI 600 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 1028>;
+			power-domains = <&sysc R8A779A0_PD_ALWAYS_ON>;
+			resets = <&cpg 1028>;
+		};
+
+		vspx1: vsp@fedd8000 {
+			compatible = "renesas,vsp2";
+			reg = <0 0xfedd8000 0 0x8000>;
+			interrupts = <GIC_SPI 601 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 1029>;
+			power-domains = <&sysc R8A779A0_PD_ALWAYS_ON>;
+			resets = <&cpg 1029>;
+		};
+
+		vspx2: vsp@fede0000 {
+			compatible = "renesas,vsp2";
+			reg = <0 0xfede0000 0 0x8000>;
+			interrupts = <GIC_SPI 602 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 1030>;
+			power-domains = <&sysc R8A779A0_PD_ALWAYS_ON>;
+			resets = <&cpg 1030>;
+		};
+
+		vspx3: vsp@fede8000 {
+			compatible = "renesas,vsp2";
+			reg = <0 0xfede8000 0 0x8000>;
+			interrupts = <GIC_SPI 603 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 1031>;
+			power-domains = <&sysc R8A779A0_PD_ALWAYS_ON>;
+			resets = <&cpg 1031>;
+		};
+
 		prr: chipid@fff00044 {
 			compatible = "renesas,prr";
 			reg = <0 0xfff00044 0 4>;
-- 
2.25.1

Re: [PATCH 1/3] arm64: dts: renesas: r8a779a0: Add FCPVD support

[Laurent Pinchart]

Hi Kieran,

Thank you for the patch.

On Wed, Dec 16, 2020 at 05:00:16PM +0000, Kieran Bingham wrote:
> Provide FCPVD support for the V3U.
> 
> Signed-off-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com>
> ---
>  arch/arm64/boot/dts/renesas/r8a779a0.dtsi | 16 ++++++++++++++++
>  1 file changed, 16 insertions(+)
> 
> diff --git a/arch/arm64/boot/dts/renesas/r8a779a0.dtsi b/arch/arm64/boot/dts/renesas/r8a779a0.dtsi
> index 6cf77ce9aa93..ba6fbbd8710e 100644
> --- a/arch/arm64/boot/dts/renesas/r8a779a0.dtsi
> +++ b/arch/arm64/boot/dts/renesas/r8a779a0.dtsi
> @@ -117,6 +117,22 @@ gic: interrupt-controller@f1000000 {
>  			power-domains = <&sysc R8A779A0_PD_ALWAYS_ON>;
>  		};
>  
> +		fcpvd0: fcp@fea10000 {
> +			compatible = "renesas,fcpv";
> +			reg = <0 0xfea10000 0 0x200>;
> +			clocks = <&cpg CPG_MOD 508>;
> +			power-domains = <&sysc R8A779A0_PD_ALWAYS_ON>;
> +			resets = <&cpg 508>;
> +		};
> +
> +		fcpvd1: fcp@fea11000 {
> +			compatible = "renesas,fcpv";
> +			reg = <0 0xfea2f000 0 0x200>;

This doesn't match the node address (the former being correct I
believe). With this fixed,

Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>

> +			clocks = <&cpg CPG_MOD 509>;
> +			power-domains = <&sysc R8A779A0_PD_ALWAYS_ON>;
> +			resets = <&cpg 509>;
> +		};
> +
>  		prr: chipid@fff00044 {
>  			compatible = "renesas,prr";
>  			reg = <0 0xfff00044 0 4>;

-- 
Regards,

Laurent Pinchart

Re: [PATCH 2/3] arm64: dts: renesas: r8a779a0: Add VSPD support

[Laurent Pinchart]

Hi Kieran,

Thank you for the patch.

On Wed, Dec 16, 2020 at 05:00:17PM +0000, Kieran Bingham wrote:
> Provide VSPD support on the V3U.
> 
> Signed-off-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com>

Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>

> ---
>  arch/arm64/boot/dts/renesas/r8a779a0.dtsi | 22 ++++++++++++++++++++++
>  1 file changed, 22 insertions(+)
> 
> diff --git a/arch/arm64/boot/dts/renesas/r8a779a0.dtsi b/arch/arm64/boot/dts/renesas/r8a779a0.dtsi
> index ba6fbbd8710e..a23b4ce2e5f4 100644
> --- a/arch/arm64/boot/dts/renesas/r8a779a0.dtsi
> +++ b/arch/arm64/boot/dts/renesas/r8a779a0.dtsi
> @@ -133,6 +133,28 @@ fcpvd1: fcp@fea11000 {
>  			resets = <&cpg 509>;
>  		};
>  
> +		vspd0: vsp@fea20000 {
> +			compatible = "renesas,vsp2";
> +			reg = <0 0xfea20000 0 0x5000>;
> +			interrupts = <GIC_SPI 128 IRQ_TYPE_LEVEL_HIGH>;
> +			clocks = <&cpg CPG_MOD 830>;
> +			power-domains = <&sysc R8A779A0_PD_ALWAYS_ON>;
> +			resets = <&cpg 830>;
> +
> +			renesas,fcp = <&fcpvd0>;
> +		};
> +
> +		vspd1: vsp@fea28000 {
> +			compatible = "renesas,vsp2";
> +			reg = <0 0xfea28000 0 0x5000>;
> +			interrupts = <GIC_SPI 129 IRQ_TYPE_LEVEL_HIGH>;
> +			clocks = <&cpg CPG_MOD 831>;
> +			power-domains = <&sysc R8A779A0_PD_ALWAYS_ON>;
> +			resets = <&cpg 831>;
> +
> +			renesas,fcp = <&fcpvd1>;
> +		};
> +
>  		prr: chipid@fff00044 {
>  			compatible = "renesas,prr";
>  			reg = <0 0xfff00044 0 4>;

-- 
Regards,

Laurent Pinchart

Re: [PATCH 3/3] arm64: dts: renesas: r8a779a0: Add VSPX support

[Laurent Pinchart]

Hi Kieran,

Thank you for the patch.

On Wed, Dec 16, 2020 at 05:00:18PM +0000, Kieran Bingham wrote:
> Provide VSP-X support on the V3U.
> 
> Signed-off-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com>
> ---
> The FCPvX is not yet connected here, as the clock domains are unclear
> for that.
> 
> The register mapping space is kept at 0x8000 for now as this is a bit of
> an unknown entity (with the IIF) so playing it safe and keeping the same
> value as the BSP (0x8000) - however with no CLU on these nodes, I expect
> the register space to be suitable to be mapped at length 0x4000.

I think so too.

>  arch/arm64/boot/dts/renesas/r8a779a0.dtsi | 36 +++++++++++++++++++++++
>  1 file changed, 36 insertions(+)
> 
> diff --git a/arch/arm64/boot/dts/renesas/r8a779a0.dtsi b/arch/arm64/boot/dts/renesas/r8a779a0.dtsi
> index a23b4ce2e5f4..4fb28df5cd6b 100644
> --- a/arch/arm64/boot/dts/renesas/r8a779a0.dtsi
> +++ b/arch/arm64/boot/dts/renesas/r8a779a0.dtsi
> @@ -155,6 +155,42 @@ vspd1: vsp@fea28000 {
>  			renesas,fcp = <&fcpvd1>;
>  		};
>  
> +		vspx0: vsp@fedd0000 {
> +			compatible = "renesas,vsp2";
> +			reg = <0 0xfedd0000 0 0x8000>;
> +			interrupts = <GIC_SPI 600 IRQ_TYPE_LEVEL_HIGH>;

I'm not entirely sure about the interrupt number, as there are other
VSP-related interrupts listed in the datasheet that don't seem to
correspond to any IP core. I suppose there will be a documentation
update at some point. For now I have no reason to believe the interrupts
here are incorrect.

Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>

> +			clocks = <&cpg CPG_MOD 1028>;
> +			power-domains = <&sysc R8A779A0_PD_ALWAYS_ON>;
> +			resets = <&cpg 1028>;
> +		};
> +
> +		vspx1: vsp@fedd8000 {
> +			compatible = "renesas,vsp2";
> +			reg = <0 0xfedd8000 0 0x8000>;
> +			interrupts = <GIC_SPI 601 IRQ_TYPE_LEVEL_HIGH>;
> +			clocks = <&cpg CPG_MOD 1029>;
> +			power-domains = <&sysc R8A779A0_PD_ALWAYS_ON>;
> +			resets = <&cpg 1029>;
> +		};
> +
> +		vspx2: vsp@fede0000 {
> +			compatible = "renesas,vsp2";
> +			reg = <0 0xfede0000 0 0x8000>;
> +			interrupts = <GIC_SPI 602 IRQ_TYPE_LEVEL_HIGH>;
> +			clocks = <&cpg CPG_MOD 1030>;
> +			power-domains = <&sysc R8A779A0_PD_ALWAYS_ON>;
> +			resets = <&cpg 1030>;
> +		};
> +
> +		vspx3: vsp@fede8000 {
> +			compatible = "renesas,vsp2";
> +			reg = <0 0xfede8000 0 0x8000>;
> +			interrupts = <GIC_SPI 603 IRQ_TYPE_LEVEL_HIGH>;
> +			clocks = <&cpg CPG_MOD 1031>;
> +			power-domains = <&sysc R8A779A0_PD_ALWAYS_ON>;
> +			resets = <&cpg 1031>;
> +		};
> +
>  		prr: chipid@fff00044 {
>  			compatible = "renesas,prr";
>  			reg = <0 0xfff00044 0 4>;

-- 
Regards,

Laurent Pinchart

Re: [PATCH 1/3] arm64: dts: renesas: r8a779a0: Add FCPVD support

[Kieran Bingham]

Hi Laurent,

On 16/12/2020 17:41, Laurent Pinchart wrote:
> Hi Kieran,
> 
> Thank you for the patch.
> 
> On Wed, Dec 16, 2020 at 05:00:16PM +0000, Kieran Bingham wrote:
>> Provide FCPVD support for the V3U.
>>
>> Signed-off-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com>
>> ---
>>  arch/arm64/boot/dts/renesas/r8a779a0.dtsi | 16 ++++++++++++++++
>>  1 file changed, 16 insertions(+)
>>
>> diff --git a/arch/arm64/boot/dts/renesas/r8a779a0.dtsi b/arch/arm64/boot/dts/renesas/r8a779a0.dtsi
>> index 6cf77ce9aa93..ba6fbbd8710e 100644
>> --- a/arch/arm64/boot/dts/renesas/r8a779a0.dtsi
>> +++ b/arch/arm64/boot/dts/renesas/r8a779a0.dtsi
>> @@ -117,6 +117,22 @@ gic: interrupt-controller@f1000000 {
>>  			power-domains = <&sysc R8A779A0_PD_ALWAYS_ON>;
>>  		};
>>  
>> +		fcpvd0: fcp@fea10000 {
>> +			compatible = "renesas,fcpv";
>> +			reg = <0 0xfea10000 0 0x200>;
>> +			clocks = <&cpg CPG_MOD 508>;
>> +			power-domains = <&sysc R8A779A0_PD_ALWAYS_ON>;
>> +			resets = <&cpg 508>;
>> +		};
>> +
>> +		fcpvd1: fcp@fea11000 {
>> +			compatible = "renesas,fcpv";
>> +			reg = <0 0xfea2f000 0 0x200>;
> 
> This doesn't match the node address (the former being correct I
> believe). With this fixed,

Oh dear, that's bad indeed.

I'm sorry - could you help me locate the correct buttons on my keyboard
to fix this please? :

> https://as1.ftcdn.net/jpg/00/74/64/78/500_F_74647888_XIrZ25aSYKhu5YB4PyuU7qYqzAJr3EjQ.jpg

:-D

> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>

Thanks.

K

> 
>> +			clocks = <&cpg CPG_MOD 509>;
>> +			power-domains = <&sysc R8A779A0_PD_ALWAYS_ON>;
>> +			resets = <&cpg 509>;
>> +		};
>> +
>>  		prr: chipid@fff00044 {
>>  			compatible = "renesas,prr";
>>  			reg = <0 0xfff00044 0 4>;
>