[PATCH 0/3] power: reset: at91-sama5d2_shdwc: add support for SAMA7G5

[PATCH 0/3] power: reset: at91-sama5d2_shdwc: add support for SAMA7G5

[Claudiu Beznea]

Hi,

This series adds support for SAMA7G5 shutdown controller.

Thank you,
Claudiu Beznea

Claudiu Beznea (3):
  power: reset: at91-sama5d2_shdwc: fix wkupdbc mask
  dt-bindings: atmel-sysreg: add microchip,sama7g5-shdwc
  power: reset: at91-sama5d2_shdwc: add support for sama7g5

 .../devicetree/bindings/arm/atmel-sysregs.txt      |  5 +-
 drivers/power/reset/at91-sama5d2_shdwc.c           | 74 ++++++++++++++++------
 2 files changed, 58 insertions(+), 21 deletions(-)

-- 
2.7.4

[PATCH 0/3] power: reset: at91-sama5d2_shdwc: add support for SAMA7G5

[Claudiu Beznea]

Hi,

This series adds support for SAMA7G5 shutdown controller.

Thank you,
Claudiu Beznea

Claudiu Beznea (3):
  power: reset: at91-sama5d2_shdwc: fix wkupdbc mask
  dt-bindings: atmel-sysreg: add microchip,sama7g5-shdwc
  power: reset: at91-sama5d2_shdwc: add support for sama7g5

 .../devicetree/bindings/arm/atmel-sysregs.txt      |  5 +-
 drivers/power/reset/at91-sama5d2_shdwc.c           | 74 ++++++++++++++++------
 2 files changed, 58 insertions(+), 21 deletions(-)

-- 
2.7.4


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

[PATCH 1/3] power: reset: at91-sama5d2_shdwc: fix wkupdbc mask

[Claudiu Beznea]

According to datasheet WKUPDBC mask is b/w bits 26..24.

Fixes: f80cb48843987 ("power: reset: at91-shdwc: add new shutdown controller driver")
Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com>
---
 drivers/power/reset/at91-sama5d2_shdwc.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/power/reset/at91-sama5d2_shdwc.c b/drivers/power/reset/at91-sama5d2_shdwc.c
index e90368ed6f71..3996167f676f 100644
--- a/drivers/power/reset/at91-sama5d2_shdwc.c
+++ b/drivers/power/reset/at91-sama5d2_shdwc.c
@@ -37,7 +37,7 @@
 
 #define AT91_SHDW_MR	0x04		/* Shut Down Mode Register */
 #define AT91_SHDW_WKUPDBC_SHIFT	24
-#define AT91_SHDW_WKUPDBC_MASK	GENMASK(31, 16)
+#define AT91_SHDW_WKUPDBC_MASK	GENMASK(26, 24)
 #define AT91_SHDW_WKUPDBC(x)	(((x) << AT91_SHDW_WKUPDBC_SHIFT) \
 						& AT91_SHDW_WKUPDBC_MASK)
 
-- 
2.7.4

[PATCH 1/3] power: reset: at91-sama5d2_shdwc: fix wkupdbc mask

[Claudiu Beznea]

According to datasheet WKUPDBC mask is b/w bits 26..24.

Fixes: f80cb48843987 ("power: reset: at91-shdwc: add new shutdown controller driver")
Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com>
---
 drivers/power/reset/at91-sama5d2_shdwc.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/power/reset/at91-sama5d2_shdwc.c b/drivers/power/reset/at91-sama5d2_shdwc.c
index e90368ed6f71..3996167f676f 100644
--- a/drivers/power/reset/at91-sama5d2_shdwc.c
+++ b/drivers/power/reset/at91-sama5d2_shdwc.c
@@ -37,7 +37,7 @@
 
 #define AT91_SHDW_MR	0x04		/* Shut Down Mode Register */
 #define AT91_SHDW_WKUPDBC_SHIFT	24
-#define AT91_SHDW_WKUPDBC_MASK	GENMASK(31, 16)
+#define AT91_SHDW_WKUPDBC_MASK	GENMASK(26, 24)
 #define AT91_SHDW_WKUPDBC(x)	(((x) << AT91_SHDW_WKUPDBC_SHIFT) \
 						& AT91_SHDW_WKUPDBC_MASK)
 
-- 
2.7.4


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

Re: [PATCH 1/3] power: reset: at91-sama5d2_shdwc: fix wkupdbc mask

[Alexandre Belloni]

On 16/12/2020 14:57:31+0200, Claudiu Beznea wrote:
> According to datasheet WKUPDBC mask is b/w bits 26..24.
> 
> Fixes: f80cb48843987 ("power: reset: at91-shdwc: add new shutdown controller driver")
> Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com>
Reviewed-by: Alexandre Belloni <alexandre.belloni@bootlin.com>

> ---
>  drivers/power/reset/at91-sama5d2_shdwc.c | 2 +-
>  1 file changed, 1 insertion(+), 1 deletion(-)
> 
> diff --git a/drivers/power/reset/at91-sama5d2_shdwc.c b/drivers/power/reset/at91-sama5d2_shdwc.c
> index e90368ed6f71..3996167f676f 100644
> --- a/drivers/power/reset/at91-sama5d2_shdwc.c
> +++ b/drivers/power/reset/at91-sama5d2_shdwc.c
> @@ -37,7 +37,7 @@
>  
>  #define AT91_SHDW_MR	0x04		/* Shut Down Mode Register */
>  #define AT91_SHDW_WKUPDBC_SHIFT	24
> -#define AT91_SHDW_WKUPDBC_MASK	GENMASK(31, 16)
> +#define AT91_SHDW_WKUPDBC_MASK	GENMASK(26, 24)
>  #define AT91_SHDW_WKUPDBC(x)	(((x) << AT91_SHDW_WKUPDBC_SHIFT) \
>  						& AT91_SHDW_WKUPDBC_MASK)
>  

Maybe you would switch to FIELD_PREP to remove the need for 2 of those 3
macros and would have made the issue apparent right away.

-- 
Alexandre Belloni, Bootlin
Embedded Linux and Kernel engineering
https://bootlin.com

Re: [PATCH 1/3] power: reset: at91-sama5d2_shdwc: fix wkupdbc mask

[Alexandre Belloni]

On 16/12/2020 14:57:31+0200, Claudiu Beznea wrote:
> According to datasheet WKUPDBC mask is b/w bits 26..24.
> 
> Fixes: f80cb48843987 ("power: reset: at91-shdwc: add new shutdown controller driver")
> Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com>
Reviewed-by: Alexandre Belloni <alexandre.belloni@bootlin.com>

> ---
>  drivers/power/reset/at91-sama5d2_shdwc.c | 2 +-
>  1 file changed, 1 insertion(+), 1 deletion(-)
> 
> diff --git a/drivers/power/reset/at91-sama5d2_shdwc.c b/drivers/power/reset/at91-sama5d2_shdwc.c
> index e90368ed6f71..3996167f676f 100644
> --- a/drivers/power/reset/at91-sama5d2_shdwc.c
> +++ b/drivers/power/reset/at91-sama5d2_shdwc.c
> @@ -37,7 +37,7 @@
>  
>  #define AT91_SHDW_MR	0x04		/* Shut Down Mode Register */
>  #define AT91_SHDW_WKUPDBC_SHIFT	24
> -#define AT91_SHDW_WKUPDBC_MASK	GENMASK(31, 16)
> +#define AT91_SHDW_WKUPDBC_MASK	GENMASK(26, 24)
>  #define AT91_SHDW_WKUPDBC(x)	(((x) << AT91_SHDW_WKUPDBC_SHIFT) \
>  						& AT91_SHDW_WKUPDBC_MASK)
>  

Maybe you would switch to FIELD_PREP to remove the need for 2 of those 3
macros and would have made the issue apparent right away.

-- 
Alexandre Belloni, Bootlin
Embedded Linux and Kernel engineering
https://bootlin.com

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

[PATCH 2/3] dt-bindings: atmel-sysreg: add microchip,sama7g5-shdwc

[Claudiu Beznea]

Add compatible for Microchip SAMA7G5's shutdown controller.

Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com>
---
 Documentation/devicetree/bindings/arm/atmel-sysregs.txt | 5 +++--
 1 file changed, 3 insertions(+), 2 deletions(-)

diff --git a/Documentation/devicetree/bindings/arm/atmel-sysregs.txt b/Documentation/devicetree/bindings/arm/atmel-sysregs.txt
index 62cd4e89817c..7990358ac06e 100644
--- a/Documentation/devicetree/bindings/arm/atmel-sysregs.txt
+++ b/Documentation/devicetree/bindings/arm/atmel-sysregs.txt
@@ -91,7 +91,8 @@ SHDWC SAMA5D2-Compatible Shutdown Controller
 1) shdwc node
 
 required properties:
-- compatible: should be "atmel,sama5d2-shdwc" or "microchip,sam9x60-shdwc".
+- compatible: should be "atmel,sama5d2-shdwc", "microchip,sam9x60-shdwc" or
+  "microchip,sama7g5-shdwc"
 - reg: should contain registers location and length
 - clocks: phandle to input clock.
 - #address-cells: should be one. The cell is the wake-up input index.
@@ -103,7 +104,7 @@ optional properties:
   microseconds. It's usually a board-related property.
 - atmel,wakeup-rtc-timer: boolean to enable Real-Time Clock wake-up.
 
-optional microchip,sam9x60-shdwc properties:
+optional microchip,sam9x60-shdwc or microchip,sama7g5-shdwc properties:
 - atmel,wakeup-rtt-timer: boolean to enable Real-time Timer Wake-up.
 
 The node contains child nodes for each wake-up input that the platform uses.
-- 
2.7.4

[PATCH 2/3] dt-bindings: atmel-sysreg: add microchip,sama7g5-shdwc

[Claudiu Beznea]

Add compatible for Microchip SAMA7G5's shutdown controller.

Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com>
---
 Documentation/devicetree/bindings/arm/atmel-sysregs.txt | 5 +++--
 1 file changed, 3 insertions(+), 2 deletions(-)

diff --git a/Documentation/devicetree/bindings/arm/atmel-sysregs.txt b/Documentation/devicetree/bindings/arm/atmel-sysregs.txt
index 62cd4e89817c..7990358ac06e 100644
--- a/Documentation/devicetree/bindings/arm/atmel-sysregs.txt
+++ b/Documentation/devicetree/bindings/arm/atmel-sysregs.txt
@@ -91,7 +91,8 @@ SHDWC SAMA5D2-Compatible Shutdown Controller
 1) shdwc node
 
 required properties:
-- compatible: should be "atmel,sama5d2-shdwc" or "microchip,sam9x60-shdwc".
+- compatible: should be "atmel,sama5d2-shdwc", "microchip,sam9x60-shdwc" or
+  "microchip,sama7g5-shdwc"
 - reg: should contain registers location and length
 - clocks: phandle to input clock.
 - #address-cells: should be one. The cell is the wake-up input index.
@@ -103,7 +104,7 @@ optional properties:
   microseconds. It's usually a board-related property.
 - atmel,wakeup-rtc-timer: boolean to enable Real-Time Clock wake-up.
 
-optional microchip,sam9x60-shdwc properties:
+optional microchip,sam9x60-shdwc or microchip,sama7g5-shdwc properties:
 - atmel,wakeup-rtt-timer: boolean to enable Real-time Timer Wake-up.
 
 The node contains child nodes for each wake-up input that the platform uses.
-- 
2.7.4


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

Re: [PATCH 2/3] dt-bindings: atmel-sysreg: add microchip,sama7g5-shdwc

[Alexandre Belloni]

On 16/12/2020 14:57:32+0200, Claudiu Beznea wrote:
> Add compatible for Microchip SAMA7G5's shutdown controller.
> 
> Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com>
> ---
>  Documentation/devicetree/bindings/arm/atmel-sysregs.txt | 5 +++--
>  1 file changed, 3 insertions(+), 2 deletions(-)

I'm pretty sure the first comment you'll get is to convert this file to
yaml ;)

> 
> diff --git a/Documentation/devicetree/bindings/arm/atmel-sysregs.txt b/Documentation/devicetree/bindings/arm/atmel-sysregs.txt
> index 62cd4e89817c..7990358ac06e 100644
> --- a/Documentation/devicetree/bindings/arm/atmel-sysregs.txt
> +++ b/Documentation/devicetree/bindings/arm/atmel-sysregs.txt
> @@ -91,7 +91,8 @@ SHDWC SAMA5D2-Compatible Shutdown Controller
>  1) shdwc node
>  
>  required properties:
> -- compatible: should be "atmel,sama5d2-shdwc" or "microchip,sam9x60-shdwc".
> +- compatible: should be "atmel,sama5d2-shdwc", "microchip,sam9x60-shdwc" or
> +  "microchip,sama7g5-shdwc"
>  - reg: should contain registers location and length
>  - clocks: phandle to input clock.
>  - #address-cells: should be one. The cell is the wake-up input index.
> @@ -103,7 +104,7 @@ optional properties:
>    microseconds. It's usually a board-related property.
>  - atmel,wakeup-rtc-timer: boolean to enable Real-Time Clock wake-up.
>  
> -optional microchip,sam9x60-shdwc properties:
> +optional microchip,sam9x60-shdwc or microchip,sama7g5-shdwc properties:
>  - atmel,wakeup-rtt-timer: boolean to enable Real-time Timer Wake-up.
>  
>  The node contains child nodes for each wake-up input that the platform uses.
> -- 
> 2.7.4
> 

-- 
Alexandre Belloni, Bootlin
Embedded Linux and Kernel engineering
https://bootlin.com

Re: [PATCH 2/3] dt-bindings: atmel-sysreg: add microchip,sama7g5-shdwc

[Alexandre Belloni]

On 16/12/2020 14:57:32+0200, Claudiu Beznea wrote:
> Add compatible for Microchip SAMA7G5's shutdown controller.
> 
> Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com>
> ---
>  Documentation/devicetree/bindings/arm/atmel-sysregs.txt | 5 +++--
>  1 file changed, 3 insertions(+), 2 deletions(-)

I'm pretty sure the first comment you'll get is to convert this file to
yaml ;)

> 
> diff --git a/Documentation/devicetree/bindings/arm/atmel-sysregs.txt b/Documentation/devicetree/bindings/arm/atmel-sysregs.txt
> index 62cd4e89817c..7990358ac06e 100644
> --- a/Documentation/devicetree/bindings/arm/atmel-sysregs.txt
> +++ b/Documentation/devicetree/bindings/arm/atmel-sysregs.txt
> @@ -91,7 +91,8 @@ SHDWC SAMA5D2-Compatible Shutdown Controller
>  1) shdwc node
>  
>  required properties:
> -- compatible: should be "atmel,sama5d2-shdwc" or "microchip,sam9x60-shdwc".
> +- compatible: should be "atmel,sama5d2-shdwc", "microchip,sam9x60-shdwc" or
> +  "microchip,sama7g5-shdwc"
>  - reg: should contain registers location and length
>  - clocks: phandle to input clock.
>  - #address-cells: should be one. The cell is the wake-up input index.
> @@ -103,7 +104,7 @@ optional properties:
>    microseconds. It's usually a board-related property.
>  - atmel,wakeup-rtc-timer: boolean to enable Real-Time Clock wake-up.
>  
> -optional microchip,sam9x60-shdwc properties:
> +optional microchip,sam9x60-shdwc or microchip,sama7g5-shdwc properties:
>  - atmel,wakeup-rtt-timer: boolean to enable Real-time Timer Wake-up.
>  
>  The node contains child nodes for each wake-up input that the platform uses.
> -- 
> 2.7.4
> 

-- 
Alexandre Belloni, Bootlin
Embedded Linux and Kernel engineering
https://bootlin.com

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

Re: [PATCH 2/3] dt-bindings: atmel-sysreg: add microchip,sama7g5-shdwc

[Rob Herring]

On Wed, Dec 16, 2020 at 02:41:00PM +0100, Alexandre Belloni wrote:
> On 16/12/2020 14:57:32+0200, Claudiu Beznea wrote:
> > Add compatible for Microchip SAMA7G5's shutdown controller.
> > 
> > Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com>
> > ---
> >  Documentation/devicetree/bindings/arm/atmel-sysregs.txt | 5 +++--
> >  1 file changed, 3 insertions(+), 2 deletions(-)
> 
> I'm pretty sure the first comment you'll get is to convert this file to
> yaml ;)

I certainly wouldn't object, but just for a new compatible not requiring 
that (yet).

> > diff --git a/Documentation/devicetree/bindings/arm/atmel-sysregs.txt b/Documentation/devicetree/bindings/arm/atmel-sysregs.txt
> > index 62cd4e89817c..7990358ac06e 100644
> > --- a/Documentation/devicetree/bindings/arm/atmel-sysregs.txt
> > +++ b/Documentation/devicetree/bindings/arm/atmel-sysregs.txt
> > @@ -91,7 +91,8 @@ SHDWC SAMA5D2-Compatible Shutdown Controller
> >  1) shdwc node
> >  
> >  required properties:
> > -- compatible: should be "atmel,sama5d2-shdwc" or "microchip,sam9x60-shdwc".
> > +- compatible: should be "atmel,sama5d2-shdwc", "microchip,sam9x60-shdwc" or
> > +  "microchip,sama7g5-shdwc"
> >  - reg: should contain registers location and length
> >  - clocks: phandle to input clock.
> >  - #address-cells: should be one. The cell is the wake-up input index.
> > @@ -103,7 +104,7 @@ optional properties:
> >    microseconds. It's usually a board-related property.
> >  - atmel,wakeup-rtc-timer: boolean to enable Real-Time Clock wake-up.
> >  
> > -optional microchip,sam9x60-shdwc properties:
> > +optional microchip,sam9x60-shdwc or microchip,sama7g5-shdwc properties:
> >  - atmel,wakeup-rtt-timer: boolean to enable Real-time Timer Wake-up.
> >  
> >  The node contains child nodes for each wake-up input that the platform uses.
> > -- 
> > 2.7.4
> > 
> 
> -- 
> Alexandre Belloni, Bootlin
> Embedded Linux and Kernel engineering
> https://bootlin.com

Re: [PATCH 2/3] dt-bindings: atmel-sysreg: add microchip,sama7g5-shdwc

[Rob Herring]

On Wed, Dec 16, 2020 at 02:41:00PM +0100, Alexandre Belloni wrote:
> On 16/12/2020 14:57:32+0200, Claudiu Beznea wrote:
> > Add compatible for Microchip SAMA7G5's shutdown controller.
> > 
> > Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com>
> > ---
> >  Documentation/devicetree/bindings/arm/atmel-sysregs.txt | 5 +++--
> >  1 file changed, 3 insertions(+), 2 deletions(-)
> 
> I'm pretty sure the first comment you'll get is to convert this file to
> yaml ;)

I certainly wouldn't object, but just for a new compatible not requiring 
that (yet).

> > diff --git a/Documentation/devicetree/bindings/arm/atmel-sysregs.txt b/Documentation/devicetree/bindings/arm/atmel-sysregs.txt
> > index 62cd4e89817c..7990358ac06e 100644
> > --- a/Documentation/devicetree/bindings/arm/atmel-sysregs.txt
> > +++ b/Documentation/devicetree/bindings/arm/atmel-sysregs.txt
> > @@ -91,7 +91,8 @@ SHDWC SAMA5D2-Compatible Shutdown Controller
> >  1) shdwc node
> >  
> >  required properties:
> > -- compatible: should be "atmel,sama5d2-shdwc" or "microchip,sam9x60-shdwc".
> > +- compatible: should be "atmel,sama5d2-shdwc", "microchip,sam9x60-shdwc" or
> > +  "microchip,sama7g5-shdwc"
> >  - reg: should contain registers location and length
> >  - clocks: phandle to input clock.
> >  - #address-cells: should be one. The cell is the wake-up input index.
> > @@ -103,7 +104,7 @@ optional properties:
> >    microseconds. It's usually a board-related property.
> >  - atmel,wakeup-rtc-timer: boolean to enable Real-Time Clock wake-up.
> >  
> > -optional microchip,sam9x60-shdwc properties:
> > +optional microchip,sam9x60-shdwc or microchip,sama7g5-shdwc properties:
> >  - atmel,wakeup-rtt-timer: boolean to enable Real-time Timer Wake-up.
> >  
> >  The node contains child nodes for each wake-up input that the platform uses.
> > -- 
> > 2.7.4
> > 
> 
> -- 
> Alexandre Belloni, Bootlin
> Embedded Linux and Kernel engineering
> https://bootlin.com

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

Re: [PATCH 2/3] dt-bindings: atmel-sysreg: add microchip,sama7g5-shdwc

[Rob Herring]

On Wed, 16 Dec 2020 14:57:32 +0200, Claudiu Beznea wrote:
> Add compatible for Microchip SAMA7G5's shutdown controller.
> 
> Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com>
> ---
>  Documentation/devicetree/bindings/arm/atmel-sysregs.txt | 5 +++--
>  1 file changed, 3 insertions(+), 2 deletions(-)
> 

Acked-by: Rob Herring <robh@kernel.org>

Re: [PATCH 2/3] dt-bindings: atmel-sysreg: add microchip,sama7g5-shdwc

[Rob Herring]

On Wed, 16 Dec 2020 14:57:32 +0200, Claudiu Beznea wrote:
> Add compatible for Microchip SAMA7G5's shutdown controller.
> 
> Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com>
> ---
>  Documentation/devicetree/bindings/arm/atmel-sysregs.txt | 5 +++--
>  1 file changed, 3 insertions(+), 2 deletions(-)
> 

Acked-by: Rob Herring <robh@kernel.org>

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

[PATCH 3/3] power: reset: at91-sama5d2_shdwc: add support for sama7g5

[Claudiu Beznea]

Add support for SAMA7G5 by adding proper struct reg_config structure
and since SAMA7G5 is not currently on LPDDR setups the commit also
avoid the mapping of DDR controller.

Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com>
---
 drivers/power/reset/at91-sama5d2_shdwc.c | 72 ++++++++++++++++++++++++--------
 1 file changed, 54 insertions(+), 18 deletions(-)

diff --git a/drivers/power/reset/at91-sama5d2_shdwc.c b/drivers/power/reset/at91-sama5d2_shdwc.c
index 3996167f676f..a3342c8c3728 100644
--- a/drivers/power/reset/at91-sama5d2_shdwc.c
+++ b/drivers/power/reset/at91-sama5d2_shdwc.c
@@ -78,9 +78,15 @@ struct pmc_reg_config {
 	u8 mckr;
 };
 
+struct ddrc_reg_config {
+	u32 type_offset;
+	u32 type_mask;
+};
+
 struct reg_config {
 	struct shdwc_reg_config shdwc;
 	struct pmc_reg_config pmc;
+	struct ddrc_reg_config ddrc;
 };
 
 struct shdwc {
@@ -262,6 +268,10 @@ static const struct reg_config sama5d2_reg_config = {
 	.pmc = {
 		.mckr		= 0x30,
 	},
+	.ddrc = {
+		.type_offset	= AT91_DDRSDRC_MDR,
+		.type_mask	= AT91_DDRSDRC_MD
+	},
 };
 
 static const struct reg_config sam9x60_reg_config = {
@@ -275,6 +285,23 @@ static const struct reg_config sam9x60_reg_config = {
 	.pmc = {
 		.mckr		= 0x28,
 	},
+	.ddrc = {
+		.type_offset	= AT91_DDRSDRC_MDR,
+		.type_mask	= AT91_DDRSDRC_MD
+	},
+};
+
+static const struct reg_config sama7g5_reg_config = {
+	.shdwc = {
+		.wkup_pin_input = 0,
+		.mr_rtcwk_shift = 17,
+		.mr_rttwk_shift = 16,
+		.sr_rtcwk_shift = 5,
+		.sr_rttwk_shift = 4,
+	},
+	.pmc = {
+		.mckr		= 0x28,
+	},
 };
 
 static const struct of_device_id at91_shdwc_of_match[] = {
@@ -285,6 +312,10 @@ static const struct of_device_id at91_shdwc_of_match[] = {
 	{
 		.compatible = "microchip,sam9x60-shdwc",
 		.data = &sam9x60_reg_config,
+	},
+	{
+		.compatible = "microchip,sama7g5-shdwc",
+		.data = &sama7g5_reg_config,
 	}, {
 		/*sentinel*/
 	}
@@ -294,6 +325,7 @@ MODULE_DEVICE_TABLE(of, at91_shdwc_of_match);
 static const struct of_device_id at91_pmc_ids[] = {
 	{ .compatible = "atmel,sama5d2-pmc" },
 	{ .compatible = "microchip,sam9x60-pmc" },
+	{ .compatible = "microchip,sama7g5-pmc" },
 	{ /* Sentinel. */ }
 };
 
@@ -355,30 +387,34 @@ static int __init at91_shdwc_probe(struct platform_device *pdev)
 		goto clk_disable;
 	}
 
-	np = of_find_compatible_node(NULL, NULL, "atmel,sama5d3-ddramc");
-	if (!np) {
-		ret = -ENODEV;
-		goto unmap;
-	}
+	if (at91_shdwc->rcfg->ddrc.type_mask) {
+		np = of_find_compatible_node(NULL, NULL,
+					     "atmel,sama5d3-ddramc");
+		if (!np) {
+			ret = -ENODEV;
+			goto unmap;
+		}
 
-	at91_shdwc->mpddrc_base = of_iomap(np, 0);
-	of_node_put(np);
+		at91_shdwc->mpddrc_base = of_iomap(np, 0);
+		of_node_put(np);
 
-	if (!at91_shdwc->mpddrc_base) {
-		ret = -ENOMEM;
-		goto unmap;
+		if (!at91_shdwc->mpddrc_base) {
+			ret = -ENOMEM;
+			goto unmap;
+		}
+
+		ddr_type = readl(at91_shdwc->mpddrc_base +
+				 at91_shdwc->rcfg->ddrc.type_offset) &
+				 at91_shdwc->rcfg->ddrc.type_mask;
+		if (ddr_type != AT91_DDRSDRC_MD_LPDDR2 &&
+		    ddr_type != AT91_DDRSDRC_MD_LPDDR3) {
+			iounmap(at91_shdwc->mpddrc_base);
+			at91_shdwc->mpddrc_base = NULL;
+		}
 	}
 
 	pm_power_off = at91_poweroff;
 
-	ddr_type = readl(at91_shdwc->mpddrc_base + AT91_DDRSDRC_MDR) &
-			 AT91_DDRSDRC_MD;
-	if (ddr_type != AT91_DDRSDRC_MD_LPDDR2 &&
-	    ddr_type != AT91_DDRSDRC_MD_LPDDR3) {
-		iounmap(at91_shdwc->mpddrc_base);
-		at91_shdwc->mpddrc_base = NULL;
-	}
-
 	return 0;
 
 unmap:
-- 
2.7.4

[PATCH 3/3] power: reset: at91-sama5d2_shdwc: add support for sama7g5

[Claudiu Beznea]

Add support for SAMA7G5 by adding proper struct reg_config structure
and since SAMA7G5 is not currently on LPDDR setups the commit also
avoid the mapping of DDR controller.

Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com>
---
 drivers/power/reset/at91-sama5d2_shdwc.c | 72 ++++++++++++++++++++++++--------
 1 file changed, 54 insertions(+), 18 deletions(-)

diff --git a/drivers/power/reset/at91-sama5d2_shdwc.c b/drivers/power/reset/at91-sama5d2_shdwc.c
index 3996167f676f..a3342c8c3728 100644
--- a/drivers/power/reset/at91-sama5d2_shdwc.c
+++ b/drivers/power/reset/at91-sama5d2_shdwc.c
@@ -78,9 +78,15 @@ struct pmc_reg_config {
 	u8 mckr;
 };
 
+struct ddrc_reg_config {
+	u32 type_offset;
+	u32 type_mask;
+};
+
 struct reg_config {
 	struct shdwc_reg_config shdwc;
 	struct pmc_reg_config pmc;
+	struct ddrc_reg_config ddrc;
 };
 
 struct shdwc {
@@ -262,6 +268,10 @@ static const struct reg_config sama5d2_reg_config = {
 	.pmc = {
 		.mckr		= 0x30,
 	},
+	.ddrc = {
+		.type_offset	= AT91_DDRSDRC_MDR,
+		.type_mask	= AT91_DDRSDRC_MD
+	},
 };
 
 static const struct reg_config sam9x60_reg_config = {
@@ -275,6 +285,23 @@ static const struct reg_config sam9x60_reg_config = {
 	.pmc = {
 		.mckr		= 0x28,
 	},
+	.ddrc = {
+		.type_offset	= AT91_DDRSDRC_MDR,
+		.type_mask	= AT91_DDRSDRC_MD
+	},
+};
+
+static const struct reg_config sama7g5_reg_config = {
+	.shdwc = {
+		.wkup_pin_input = 0,
+		.mr_rtcwk_shift = 17,
+		.mr_rttwk_shift = 16,
+		.sr_rtcwk_shift = 5,
+		.sr_rttwk_shift = 4,
+	},
+	.pmc = {
+		.mckr		= 0x28,
+	},
 };
 
 static const struct of_device_id at91_shdwc_of_match[] = {
@@ -285,6 +312,10 @@ static const struct of_device_id at91_shdwc_of_match[] = {
 	{
 		.compatible = "microchip,sam9x60-shdwc",
 		.data = &sam9x60_reg_config,
+	},
+	{
+		.compatible = "microchip,sama7g5-shdwc",
+		.data = &sama7g5_reg_config,
 	}, {
 		/*sentinel*/
 	}
@@ -294,6 +325,7 @@ MODULE_DEVICE_TABLE(of, at91_shdwc_of_match);
 static const struct of_device_id at91_pmc_ids[] = {
 	{ .compatible = "atmel,sama5d2-pmc" },
 	{ .compatible = "microchip,sam9x60-pmc" },
+	{ .compatible = "microchip,sama7g5-pmc" },
 	{ /* Sentinel. */ }
 };
 
@@ -355,30 +387,34 @@ static int __init at91_shdwc_probe(struct platform_device *pdev)
 		goto clk_disable;
 	}
 
-	np = of_find_compatible_node(NULL, NULL, "atmel,sama5d3-ddramc");
-	if (!np) {
-		ret = -ENODEV;
-		goto unmap;
-	}
+	if (at91_shdwc->rcfg->ddrc.type_mask) {
+		np = of_find_compatible_node(NULL, NULL,
+					     "atmel,sama5d3-ddramc");
+		if (!np) {
+			ret = -ENODEV;
+			goto unmap;
+		}
 
-	at91_shdwc->mpddrc_base = of_iomap(np, 0);
-	of_node_put(np);
+		at91_shdwc->mpddrc_base = of_iomap(np, 0);
+		of_node_put(np);
 
-	if (!at91_shdwc->mpddrc_base) {
-		ret = -ENOMEM;
-		goto unmap;
+		if (!at91_shdwc->mpddrc_base) {
+			ret = -ENOMEM;
+			goto unmap;
+		}
+
+		ddr_type = readl(at91_shdwc->mpddrc_base +
+				 at91_shdwc->rcfg->ddrc.type_offset) &
+				 at91_shdwc->rcfg->ddrc.type_mask;
+		if (ddr_type != AT91_DDRSDRC_MD_LPDDR2 &&
+		    ddr_type != AT91_DDRSDRC_MD_LPDDR3) {
+			iounmap(at91_shdwc->mpddrc_base);
+			at91_shdwc->mpddrc_base = NULL;
+		}
 	}
 
 	pm_power_off = at91_poweroff;
 
-	ddr_type = readl(at91_shdwc->mpddrc_base + AT91_DDRSDRC_MDR) &
-			 AT91_DDRSDRC_MD;
-	if (ddr_type != AT91_DDRSDRC_MD_LPDDR2 &&
-	    ddr_type != AT91_DDRSDRC_MD_LPDDR3) {
-		iounmap(at91_shdwc->mpddrc_base);
-		at91_shdwc->mpddrc_base = NULL;
-	}
-
 	return 0;
 
 unmap:
-- 
2.7.4


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

Re: [PATCH 3/3] power: reset: at91-sama5d2_shdwc: add support for sama7g5

[Alexandre Belloni]

On 16/12/2020 14:57:33+0200, Claudiu Beznea wrote:
> Add support for SAMA7G5 by adding proper struct reg_config structure
> and since SAMA7G5 is not currently on LPDDR setups the commit also
> avoid the mapping of DDR controller.
> 

Honestly, I wouldn't leave the LPDDR part out because there is no
guarantee anyone will think about it when they have a design with LPDDR
and as a consequence, their device will behave properly but will be
very short lived.

> Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com>
> ---
>  drivers/power/reset/at91-sama5d2_shdwc.c | 72 ++++++++++++++++++++++++--------
>  1 file changed, 54 insertions(+), 18 deletions(-)
> 
> diff --git a/drivers/power/reset/at91-sama5d2_shdwc.c b/drivers/power/reset/at91-sama5d2_shdwc.c
> index 3996167f676f..a3342c8c3728 100644
> --- a/drivers/power/reset/at91-sama5d2_shdwc.c
> +++ b/drivers/power/reset/at91-sama5d2_shdwc.c
> @@ -78,9 +78,15 @@ struct pmc_reg_config {
>  	u8 mckr;
>  };
>  
> +struct ddrc_reg_config {
> +	u32 type_offset;
> +	u32 type_mask;
> +};
> +
>  struct reg_config {
>  	struct shdwc_reg_config shdwc;
>  	struct pmc_reg_config pmc;
> +	struct ddrc_reg_config ddrc;
>  };
>  
>  struct shdwc {
> @@ -262,6 +268,10 @@ static const struct reg_config sama5d2_reg_config = {
>  	.pmc = {
>  		.mckr		= 0x30,
>  	},
> +	.ddrc = {
> +		.type_offset	= AT91_DDRSDRC_MDR,
> +		.type_mask	= AT91_DDRSDRC_MD
> +	},
>  };
>  
>  static const struct reg_config sam9x60_reg_config = {
> @@ -275,6 +285,23 @@ static const struct reg_config sam9x60_reg_config = {
>  	.pmc = {
>  		.mckr		= 0x28,
>  	},
> +	.ddrc = {
> +		.type_offset	= AT91_DDRSDRC_MDR,
> +		.type_mask	= AT91_DDRSDRC_MD
> +	},
> +};
> +
> +static const struct reg_config sama7g5_reg_config = {
> +	.shdwc = {
> +		.wkup_pin_input = 0,
> +		.mr_rtcwk_shift = 17,
> +		.mr_rttwk_shift = 16,
> +		.sr_rtcwk_shift = 5,
> +		.sr_rttwk_shift = 4,
> +	},
> +	.pmc = {
> +		.mckr		= 0x28,
> +	},
>  };
>  
>  static const struct of_device_id at91_shdwc_of_match[] = {
> @@ -285,6 +312,10 @@ static const struct of_device_id at91_shdwc_of_match[] = {
>  	{
>  		.compatible = "microchip,sam9x60-shdwc",
>  		.data = &sam9x60_reg_config,
> +	},
> +	{
> +		.compatible = "microchip,sama7g5-shdwc",
> +		.data = &sama7g5_reg_config,
>  	}, {
>  		/*sentinel*/
>  	}
> @@ -294,6 +325,7 @@ MODULE_DEVICE_TABLE(of, at91_shdwc_of_match);
>  static const struct of_device_id at91_pmc_ids[] = {
>  	{ .compatible = "atmel,sama5d2-pmc" },
>  	{ .compatible = "microchip,sam9x60-pmc" },
> +	{ .compatible = "microchip,sama7g5-pmc" },
>  	{ /* Sentinel. */ }
>  };
>  
> @@ -355,30 +387,34 @@ static int __init at91_shdwc_probe(struct platform_device *pdev)
>  		goto clk_disable;
>  	}
>  
> -	np = of_find_compatible_node(NULL, NULL, "atmel,sama5d3-ddramc");
> -	if (!np) {
> -		ret = -ENODEV;
> -		goto unmap;
> -	}
> +	if (at91_shdwc->rcfg->ddrc.type_mask) {
> +		np = of_find_compatible_node(NULL, NULL,
> +					     "atmel,sama5d3-ddramc");
> +		if (!np) {
> +			ret = -ENODEV;
> +			goto unmap;
> +		}
>  
> -	at91_shdwc->mpddrc_base = of_iomap(np, 0);
> -	of_node_put(np);
> +		at91_shdwc->mpddrc_base = of_iomap(np, 0);
> +		of_node_put(np);
>  
> -	if (!at91_shdwc->mpddrc_base) {
> -		ret = -ENOMEM;
> -		goto unmap;
> +		if (!at91_shdwc->mpddrc_base) {
> +			ret = -ENOMEM;
> +			goto unmap;
> +		}
> +
> +		ddr_type = readl(at91_shdwc->mpddrc_base +
> +				 at91_shdwc->rcfg->ddrc.type_offset) &
> +				 at91_shdwc->rcfg->ddrc.type_mask;
> +		if (ddr_type != AT91_DDRSDRC_MD_LPDDR2 &&
> +		    ddr_type != AT91_DDRSDRC_MD_LPDDR3) {
> +			iounmap(at91_shdwc->mpddrc_base);
> +			at91_shdwc->mpddrc_base = NULL;
> +		}
>  	}
>  
>  	pm_power_off = at91_poweroff;
>  
> -	ddr_type = readl(at91_shdwc->mpddrc_base + AT91_DDRSDRC_MDR) &
> -			 AT91_DDRSDRC_MD;
> -	if (ddr_type != AT91_DDRSDRC_MD_LPDDR2 &&
> -	    ddr_type != AT91_DDRSDRC_MD_LPDDR3) {
> -		iounmap(at91_shdwc->mpddrc_base);
> -		at91_shdwc->mpddrc_base = NULL;
> -	}
> -
>  	return 0;
>  
>  unmap:
> -- 
> 2.7.4
> 

-- 
Alexandre Belloni, Bootlin
Embedded Linux and Kernel engineering
https://bootlin.com

Re: [PATCH 3/3] power: reset: at91-sama5d2_shdwc: add support for sama7g5

[Alexandre Belloni]

On 16/12/2020 14:57:33+0200, Claudiu Beznea wrote:
> Add support for SAMA7G5 by adding proper struct reg_config structure
> and since SAMA7G5 is not currently on LPDDR setups the commit also
> avoid the mapping of DDR controller.
> 

Honestly, I wouldn't leave the LPDDR part out because there is no
guarantee anyone will think about it when they have a design with LPDDR
and as a consequence, their device will behave properly but will be
very short lived.

> Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com>
> ---
>  drivers/power/reset/at91-sama5d2_shdwc.c | 72 ++++++++++++++++++++++++--------
>  1 file changed, 54 insertions(+), 18 deletions(-)
> 
> diff --git a/drivers/power/reset/at91-sama5d2_shdwc.c b/drivers/power/reset/at91-sama5d2_shdwc.c
> index 3996167f676f..a3342c8c3728 100644
> --- a/drivers/power/reset/at91-sama5d2_shdwc.c
> +++ b/drivers/power/reset/at91-sama5d2_shdwc.c
> @@ -78,9 +78,15 @@ struct pmc_reg_config {
>  	u8 mckr;
>  };
>  
> +struct ddrc_reg_config {
> +	u32 type_offset;
> +	u32 type_mask;
> +};
> +
>  struct reg_config {
>  	struct shdwc_reg_config shdwc;
>  	struct pmc_reg_config pmc;
> +	struct ddrc_reg_config ddrc;
>  };
>  
>  struct shdwc {
> @@ -262,6 +268,10 @@ static const struct reg_config sama5d2_reg_config = {
>  	.pmc = {
>  		.mckr		= 0x30,
>  	},
> +	.ddrc = {
> +		.type_offset	= AT91_DDRSDRC_MDR,
> +		.type_mask	= AT91_DDRSDRC_MD
> +	},
>  };
>  
>  static const struct reg_config sam9x60_reg_config = {
> @@ -275,6 +285,23 @@ static const struct reg_config sam9x60_reg_config = {
>  	.pmc = {
>  		.mckr		= 0x28,
>  	},
> +	.ddrc = {
> +		.type_offset	= AT91_DDRSDRC_MDR,
> +		.type_mask	= AT91_DDRSDRC_MD
> +	},
> +};
> +
> +static const struct reg_config sama7g5_reg_config = {
> +	.shdwc = {
> +		.wkup_pin_input = 0,
> +		.mr_rtcwk_shift = 17,
> +		.mr_rttwk_shift = 16,
> +		.sr_rtcwk_shift = 5,
> +		.sr_rttwk_shift = 4,
> +	},
> +	.pmc = {
> +		.mckr		= 0x28,
> +	},
>  };
>  
>  static const struct of_device_id at91_shdwc_of_match[] = {
> @@ -285,6 +312,10 @@ static const struct of_device_id at91_shdwc_of_match[] = {
>  	{
>  		.compatible = "microchip,sam9x60-shdwc",
>  		.data = &sam9x60_reg_config,
> +	},
> +	{
> +		.compatible = "microchip,sama7g5-shdwc",
> +		.data = &sama7g5_reg_config,
>  	}, {
>  		/*sentinel*/
>  	}
> @@ -294,6 +325,7 @@ MODULE_DEVICE_TABLE(of, at91_shdwc_of_match);
>  static const struct of_device_id at91_pmc_ids[] = {
>  	{ .compatible = "atmel,sama5d2-pmc" },
>  	{ .compatible = "microchip,sam9x60-pmc" },
> +	{ .compatible = "microchip,sama7g5-pmc" },
>  	{ /* Sentinel. */ }
>  };
>  
> @@ -355,30 +387,34 @@ static int __init at91_shdwc_probe(struct platform_device *pdev)
>  		goto clk_disable;
>  	}
>  
> -	np = of_find_compatible_node(NULL, NULL, "atmel,sama5d3-ddramc");
> -	if (!np) {
> -		ret = -ENODEV;
> -		goto unmap;
> -	}
> +	if (at91_shdwc->rcfg->ddrc.type_mask) {
> +		np = of_find_compatible_node(NULL, NULL,
> +					     "atmel,sama5d3-ddramc");
> +		if (!np) {
> +			ret = -ENODEV;
> +			goto unmap;
> +		}
>  
> -	at91_shdwc->mpddrc_base = of_iomap(np, 0);
> -	of_node_put(np);
> +		at91_shdwc->mpddrc_base = of_iomap(np, 0);
> +		of_node_put(np);
>  
> -	if (!at91_shdwc->mpddrc_base) {
> -		ret = -ENOMEM;
> -		goto unmap;
> +		if (!at91_shdwc->mpddrc_base) {
> +			ret = -ENOMEM;
> +			goto unmap;
> +		}
> +
> +		ddr_type = readl(at91_shdwc->mpddrc_base +
> +				 at91_shdwc->rcfg->ddrc.type_offset) &
> +				 at91_shdwc->rcfg->ddrc.type_mask;
> +		if (ddr_type != AT91_DDRSDRC_MD_LPDDR2 &&
> +		    ddr_type != AT91_DDRSDRC_MD_LPDDR3) {
> +			iounmap(at91_shdwc->mpddrc_base);
> +			at91_shdwc->mpddrc_base = NULL;
> +		}
>  	}
>  
>  	pm_power_off = at91_poweroff;
>  
> -	ddr_type = readl(at91_shdwc->mpddrc_base + AT91_DDRSDRC_MDR) &
> -			 AT91_DDRSDRC_MD;
> -	if (ddr_type != AT91_DDRSDRC_MD_LPDDR2 &&
> -	    ddr_type != AT91_DDRSDRC_MD_LPDDR3) {
> -		iounmap(at91_shdwc->mpddrc_base);
> -		at91_shdwc->mpddrc_base = NULL;
> -	}
> -
>  	return 0;
>  
>  unmap:
> -- 
> 2.7.4
> 

-- 
Alexandre Belloni, Bootlin
Embedded Linux and Kernel engineering
https://bootlin.com

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

Re: [PATCH 3/3] power: reset: at91-sama5d2_shdwc: add support for sama7g5

[Claudiu.Beznea]

On 16.12.2020 15:45, Alexandre Belloni wrote:
> EXTERNAL EMAIL: Do not click links or open attachments unless you know the content is safe
> 
> On 16/12/2020 14:57:33+0200, Claudiu Beznea wrote:
>> Add support for SAMA7G5 by adding proper struct reg_config structure
>> and since SAMA7G5 is not currently on LPDDR setups the commit also
>> avoid the mapping of DDR controller.
>>
> 
> Honestly, I wouldn't leave the LPDDR part out because there is no
> guarantee anyone will think about it when they have a design with LPDDR
> and as a consequence, their device will behave properly but will be
> very short lived.

The idea wasn't to leave it out. It has to be handled differently on
SAMA7G5 as it embeds a different DDR controller.

Thank you,
Claudiu

> 
>> Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com>
>> ---
>>  drivers/power/reset/at91-sama5d2_shdwc.c | 72 ++++++++++++++++++++++++--------
>>  1 file changed, 54 insertions(+), 18 deletions(-)
>>
>> diff --git a/drivers/power/reset/at91-sama5d2_shdwc.c b/drivers/power/reset/at91-sama5d2_shdwc.c
>> index 3996167f676f..a3342c8c3728 100644
>> --- a/drivers/power/reset/at91-sama5d2_shdwc.c
>> +++ b/drivers/power/reset/at91-sama5d2_shdwc.c
>> @@ -78,9 +78,15 @@ struct pmc_reg_config {
>>       u8 mckr;
>>  };
>>
>> +struct ddrc_reg_config {
>> +     u32 type_offset;
>> +     u32 type_mask;
>> +};
>> +
>>  struct reg_config {
>>       struct shdwc_reg_config shdwc;
>>       struct pmc_reg_config pmc;
>> +     struct ddrc_reg_config ddrc;
>>  };
>>
>>  struct shdwc {
>> @@ -262,6 +268,10 @@ static const struct reg_config sama5d2_reg_config = {
>>       .pmc = {
>>               .mckr           = 0x30,
>>       },
>> +     .ddrc = {
>> +             .type_offset    = AT91_DDRSDRC_MDR,
>> +             .type_mask      = AT91_DDRSDRC_MD
>> +     },
>>  };
>>
>>  static const struct reg_config sam9x60_reg_config = {
>> @@ -275,6 +285,23 @@ static const struct reg_config sam9x60_reg_config = {
>>       .pmc = {
>>               .mckr           = 0x28,
>>       },
>> +     .ddrc = {
>> +             .type_offset    = AT91_DDRSDRC_MDR,
>> +             .type_mask      = AT91_DDRSDRC_MD
>> +     },
>> +};
>> +
>> +static const struct reg_config sama7g5_reg_config = {
>> +     .shdwc = {
>> +             .wkup_pin_input = 0,
>> +             .mr_rtcwk_shift = 17,
>> +             .mr_rttwk_shift = 16,
>> +             .sr_rtcwk_shift = 5,
>> +             .sr_rttwk_shift = 4,
>> +     },
>> +     .pmc = {
>> +             .mckr           = 0x28,
>> +     },
>>  };
>>
>>  static const struct of_device_id at91_shdwc_of_match[] = {
>> @@ -285,6 +312,10 @@ static const struct of_device_id at91_shdwc_of_match[] = {
>>       {
>>               .compatible = "microchip,sam9x60-shdwc",
>>               .data = &sam9x60_reg_config,
>> +     },
>> +     {
>> +             .compatible = "microchip,sama7g5-shdwc",
>> +             .data = &sama7g5_reg_config,
>>       }, {
>>               /*sentinel*/
>>       }
>> @@ -294,6 +325,7 @@ MODULE_DEVICE_TABLE(of, at91_shdwc_of_match);
>>  static const struct of_device_id at91_pmc_ids[] = {
>>       { .compatible = "atmel,sama5d2-pmc" },
>>       { .compatible = "microchip,sam9x60-pmc" },
>> +     { .compatible = "microchip,sama7g5-pmc" },
>>       { /* Sentinel. */ }
>>  };
>>
>> @@ -355,30 +387,34 @@ static int __init at91_shdwc_probe(struct platform_device *pdev)
>>               goto clk_disable;
>>       }
>>
>> -     np = of_find_compatible_node(NULL, NULL, "atmel,sama5d3-ddramc");
>> -     if (!np) {
>> -             ret = -ENODEV;
>> -             goto unmap;
>> -     }
>> +     if (at91_shdwc->rcfg->ddrc.type_mask) {
>> +             np = of_find_compatible_node(NULL, NULL,
>> +                                          "atmel,sama5d3-ddramc");
>> +             if (!np) {
>> +                     ret = -ENODEV;
>> +                     goto unmap;
>> +             }
>>
>> -     at91_shdwc->mpddrc_base = of_iomap(np, 0);
>> -     of_node_put(np);
>> +             at91_shdwc->mpddrc_base = of_iomap(np, 0);
>> +             of_node_put(np);
>>
>> -     if (!at91_shdwc->mpddrc_base) {
>> -             ret = -ENOMEM;
>> -             goto unmap;
>> +             if (!at91_shdwc->mpddrc_base) {
>> +                     ret = -ENOMEM;
>> +                     goto unmap;
>> +             }
>> +
>> +             ddr_type = readl(at91_shdwc->mpddrc_base +
>> +                              at91_shdwc->rcfg->ddrc.type_offset) &
>> +                              at91_shdwc->rcfg->ddrc.type_mask;
>> +             if (ddr_type != AT91_DDRSDRC_MD_LPDDR2 &&
>> +                 ddr_type != AT91_DDRSDRC_MD_LPDDR3) {
>> +                     iounmap(at91_shdwc->mpddrc_base);
>> +                     at91_shdwc->mpddrc_base = NULL;
>> +             }
>>       }
>>
>>       pm_power_off = at91_poweroff;
>>
>> -     ddr_type = readl(at91_shdwc->mpddrc_base + AT91_DDRSDRC_MDR) &
>> -                      AT91_DDRSDRC_MD;
>> -     if (ddr_type != AT91_DDRSDRC_MD_LPDDR2 &&
>> -         ddr_type != AT91_DDRSDRC_MD_LPDDR3) {
>> -             iounmap(at91_shdwc->mpddrc_base);
>> -             at91_shdwc->mpddrc_base = NULL;
>> -     }
>> -
>>       return 0;
>>
>>  unmap:
>> --
>> 2.7.4
>>
> 
> --
> Alexandre Belloni, Bootlin
> Embedded Linux and Kernel engineering
> https://bootlin.com
> 

Re: [PATCH 3/3] power: reset: at91-sama5d2_shdwc: add support for sama7g5

[Claudiu.Beznea]

On 16.12.2020 15:45, Alexandre Belloni wrote:
> EXTERNAL EMAIL: Do not click links or open attachments unless you know the content is safe
> 
> On 16/12/2020 14:57:33+0200, Claudiu Beznea wrote:
>> Add support for SAMA7G5 by adding proper struct reg_config structure
>> and since SAMA7G5 is not currently on LPDDR setups the commit also
>> avoid the mapping of DDR controller.
>>
> 
> Honestly, I wouldn't leave the LPDDR part out because there is no
> guarantee anyone will think about it when they have a design with LPDDR
> and as a consequence, their device will behave properly but will be
> very short lived.

The idea wasn't to leave it out. It has to be handled differently on
SAMA7G5 as it embeds a different DDR controller.

Thank you,
Claudiu

> 
>> Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com>
>> ---
>>  drivers/power/reset/at91-sama5d2_shdwc.c | 72 ++++++++++++++++++++++++--------
>>  1 file changed, 54 insertions(+), 18 deletions(-)
>>
>> diff --git a/drivers/power/reset/at91-sama5d2_shdwc.c b/drivers/power/reset/at91-sama5d2_shdwc.c
>> index 3996167f676f..a3342c8c3728 100644
>> --- a/drivers/power/reset/at91-sama5d2_shdwc.c
>> +++ b/drivers/power/reset/at91-sama5d2_shdwc.c
>> @@ -78,9 +78,15 @@ struct pmc_reg_config {
>>       u8 mckr;
>>  };
>>
>> +struct ddrc_reg_config {
>> +     u32 type_offset;
>> +     u32 type_mask;
>> +};
>> +
>>  struct reg_config {
>>       struct shdwc_reg_config shdwc;
>>       struct pmc_reg_config pmc;
>> +     struct ddrc_reg_config ddrc;
>>  };
>>
>>  struct shdwc {
>> @@ -262,6 +268,10 @@ static const struct reg_config sama5d2_reg_config = {
>>       .pmc = {
>>               .mckr           = 0x30,
>>       },
>> +     .ddrc = {
>> +             .type_offset    = AT91_DDRSDRC_MDR,
>> +             .type_mask      = AT91_DDRSDRC_MD
>> +     },
>>  };
>>
>>  static const struct reg_config sam9x60_reg_config = {
>> @@ -275,6 +285,23 @@ static const struct reg_config sam9x60_reg_config = {
>>       .pmc = {
>>               .mckr           = 0x28,
>>       },
>> +     .ddrc = {
>> +             .type_offset    = AT91_DDRSDRC_MDR,
>> +             .type_mask      = AT91_DDRSDRC_MD
>> +     },
>> +};
>> +
>> +static const struct reg_config sama7g5_reg_config = {
>> +     .shdwc = {
>> +             .wkup_pin_input = 0,
>> +             .mr_rtcwk_shift = 17,
>> +             .mr_rttwk_shift = 16,
>> +             .sr_rtcwk_shift = 5,
>> +             .sr_rttwk_shift = 4,
>> +     },
>> +     .pmc = {
>> +             .mckr           = 0x28,
>> +     },
>>  };
>>
>>  static const struct of_device_id at91_shdwc_of_match[] = {
>> @@ -285,6 +312,10 @@ static const struct of_device_id at91_shdwc_of_match[] = {
>>       {
>>               .compatible = "microchip,sam9x60-shdwc",
>>               .data = &sam9x60_reg_config,
>> +     },
>> +     {
>> +             .compatible = "microchip,sama7g5-shdwc",
>> +             .data = &sama7g5_reg_config,
>>       }, {
>>               /*sentinel*/
>>       }
>> @@ -294,6 +325,7 @@ MODULE_DEVICE_TABLE(of, at91_shdwc_of_match);
>>  static const struct of_device_id at91_pmc_ids[] = {
>>       { .compatible = "atmel,sama5d2-pmc" },
>>       { .compatible = "microchip,sam9x60-pmc" },
>> +     { .compatible = "microchip,sama7g5-pmc" },
>>       { /* Sentinel. */ }
>>  };
>>
>> @@ -355,30 +387,34 @@ static int __init at91_shdwc_probe(struct platform_device *pdev)
>>               goto clk_disable;
>>       }
>>
>> -     np = of_find_compatible_node(NULL, NULL, "atmel,sama5d3-ddramc");
>> -     if (!np) {
>> -             ret = -ENODEV;
>> -             goto unmap;
>> -     }
>> +     if (at91_shdwc->rcfg->ddrc.type_mask) {
>> +             np = of_find_compatible_node(NULL, NULL,
>> +                                          "atmel,sama5d3-ddramc");
>> +             if (!np) {
>> +                     ret = -ENODEV;
>> +                     goto unmap;
>> +             }
>>
>> -     at91_shdwc->mpddrc_base = of_iomap(np, 0);
>> -     of_node_put(np);
>> +             at91_shdwc->mpddrc_base = of_iomap(np, 0);
>> +             of_node_put(np);
>>
>> -     if (!at91_shdwc->mpddrc_base) {
>> -             ret = -ENOMEM;
>> -             goto unmap;
>> +             if (!at91_shdwc->mpddrc_base) {
>> +                     ret = -ENOMEM;
>> +                     goto unmap;
>> +             }
>> +
>> +             ddr_type = readl(at91_shdwc->mpddrc_base +
>> +                              at91_shdwc->rcfg->ddrc.type_offset) &
>> +                              at91_shdwc->rcfg->ddrc.type_mask;
>> +             if (ddr_type != AT91_DDRSDRC_MD_LPDDR2 &&
>> +                 ddr_type != AT91_DDRSDRC_MD_LPDDR3) {
>> +                     iounmap(at91_shdwc->mpddrc_base);
>> +                     at91_shdwc->mpddrc_base = NULL;
>> +             }
>>       }
>>
>>       pm_power_off = at91_poweroff;
>>
>> -     ddr_type = readl(at91_shdwc->mpddrc_base + AT91_DDRSDRC_MDR) &
>> -                      AT91_DDRSDRC_MD;
>> -     if (ddr_type != AT91_DDRSDRC_MD_LPDDR2 &&
>> -         ddr_type != AT91_DDRSDRC_MD_LPDDR3) {
>> -             iounmap(at91_shdwc->mpddrc_base);
>> -             at91_shdwc->mpddrc_base = NULL;
>> -     }
>> -
>>       return 0;
>>
>>  unmap:
>> --
>> 2.7.4
>>
> 
> --
> Alexandre Belloni, Bootlin
> Embedded Linux and Kernel engineering
> https://bootlin.com
> 
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

Re: [PATCH 3/3] power: reset: at91-sama5d2_shdwc: add support for sama7g5

[Claudiu.Beznea]

On 16.12.2020 15:45, Alexandre Belloni wrote:
> EXTERNAL EMAIL: Do not click links or open attachments unless you know the content is safe
> 
> On 16/12/2020 14:57:33+0200, Claudiu Beznea wrote:
>> Add support for SAMA7G5 by adding proper struct reg_config structure
>> and since SAMA7G5 is not currently on LPDDR setups the commit also
>> avoid the mapping of DDR controller.
>>
> 
> Honestly, I wouldn't leave the LPDDR part out because there is no
> guarantee anyone will think about it when they have a design with LPDDR
> and as a consequence, their device will behave properly but will be
> very short lived.

The idea wasn't to leave it out. It has to be handled differently on
SAMA7G5 as it embeds a different DDR controller and at the moment we have
no setup with LPDDR.

Thank you,
Claudiu

> 
>> Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com>
>> ---
>>  drivers/power/reset/at91-sama5d2_shdwc.c | 72 ++++++++++++++++++++++++--------
>>  1 file changed, 54 insertions(+), 18 deletions(-)
>>
>> diff --git a/drivers/power/reset/at91-sama5d2_shdwc.c b/drivers/power/reset/at91-sama5d2_shdwc.c
>> index 3996167f676f..a3342c8c3728 100644
>> --- a/drivers/power/reset/at91-sama5d2_shdwc.c
>> +++ b/drivers/power/reset/at91-sama5d2_shdwc.c
>> @@ -78,9 +78,15 @@ struct pmc_reg_config {
>>       u8 mckr;
>>  };
>>
>> +struct ddrc_reg_config {
>> +     u32 type_offset;
>> +     u32 type_mask;
>> +};
>> +
>>  struct reg_config {
>>       struct shdwc_reg_config shdwc;
>>       struct pmc_reg_config pmc;
>> +     struct ddrc_reg_config ddrc;
>>  };
>>
>>  struct shdwc {
>> @@ -262,6 +268,10 @@ static const struct reg_config sama5d2_reg_config = {
>>       .pmc = {
>>               .mckr           = 0x30,
>>       },
>> +     .ddrc = {
>> +             .type_offset    = AT91_DDRSDRC_MDR,
>> +             .type_mask      = AT91_DDRSDRC_MD
>> +     },
>>  };
>>
>>  static const struct reg_config sam9x60_reg_config = {
>> @@ -275,6 +285,23 @@ static const struct reg_config sam9x60_reg_config = {
>>       .pmc = {
>>               .mckr           = 0x28,
>>       },
>> +     .ddrc = {
>> +             .type_offset    = AT91_DDRSDRC_MDR,
>> +             .type_mask      = AT91_DDRSDRC_MD
>> +     },
>> +};
>> +
>> +static const struct reg_config sama7g5_reg_config = {
>> +     .shdwc = {
>> +             .wkup_pin_input = 0,
>> +             .mr_rtcwk_shift = 17,
>> +             .mr_rttwk_shift = 16,
>> +             .sr_rtcwk_shift = 5,
>> +             .sr_rttwk_shift = 4,
>> +     },
>> +     .pmc = {
>> +             .mckr           = 0x28,
>> +     },
>>  };
>>
>>  static const struct of_device_id at91_shdwc_of_match[] = {
>> @@ -285,6 +312,10 @@ static const struct of_device_id at91_shdwc_of_match[] = {
>>       {
>>               .compatible = "microchip,sam9x60-shdwc",
>>               .data = &sam9x60_reg_config,
>> +     },
>> +     {
>> +             .compatible = "microchip,sama7g5-shdwc",
>> +             .data = &sama7g5_reg_config,
>>       }, {
>>               /*sentinel*/
>>       }
>> @@ -294,6 +325,7 @@ MODULE_DEVICE_TABLE(of, at91_shdwc_of_match);
>>  static const struct of_device_id at91_pmc_ids[] = {
>>       { .compatible = "atmel,sama5d2-pmc" },
>>       { .compatible = "microchip,sam9x60-pmc" },
>> +     { .compatible = "microchip,sama7g5-pmc" },
>>       { /* Sentinel. */ }
>>  };
>>
>> @@ -355,30 +387,34 @@ static int __init at91_shdwc_probe(struct platform_device *pdev)
>>               goto clk_disable;
>>       }
>>
>> -     np = of_find_compatible_node(NULL, NULL, "atmel,sama5d3-ddramc");
>> -     if (!np) {
>> -             ret = -ENODEV;
>> -             goto unmap;
>> -     }
>> +     if (at91_shdwc->rcfg->ddrc.type_mask) {
>> +             np = of_find_compatible_node(NULL, NULL,
>> +                                          "atmel,sama5d3-ddramc");
>> +             if (!np) {
>> +                     ret = -ENODEV;
>> +                     goto unmap;
>> +             }
>>
>> -     at91_shdwc->mpddrc_base = of_iomap(np, 0);
>> -     of_node_put(np);
>> +             at91_shdwc->mpddrc_base = of_iomap(np, 0);
>> +             of_node_put(np);
>>
>> -     if (!at91_shdwc->mpddrc_base) {
>> -             ret = -ENOMEM;
>> -             goto unmap;
>> +             if (!at91_shdwc->mpddrc_base) {
>> +                     ret = -ENOMEM;
>> +                     goto unmap;
>> +             }
>> +
>> +             ddr_type = readl(at91_shdwc->mpddrc_base +
>> +                              at91_shdwc->rcfg->ddrc.type_offset) &
>> +                              at91_shdwc->rcfg->ddrc.type_mask;
>> +             if (ddr_type != AT91_DDRSDRC_MD_LPDDR2 &&
>> +                 ddr_type != AT91_DDRSDRC_MD_LPDDR3) {
>> +                     iounmap(at91_shdwc->mpddrc_base);
>> +                     at91_shdwc->mpddrc_base = NULL;
>> +             }
>>       }
>>
>>       pm_power_off = at91_poweroff;
>>
>> -     ddr_type = readl(at91_shdwc->mpddrc_base + AT91_DDRSDRC_MDR) &
>> -                      AT91_DDRSDRC_MD;
>> -     if (ddr_type != AT91_DDRSDRC_MD_LPDDR2 &&
>> -         ddr_type != AT91_DDRSDRC_MD_LPDDR3) {
>> -             iounmap(at91_shdwc->mpddrc_base);
>> -             at91_shdwc->mpddrc_base = NULL;
>> -     }
>> -
>>       return 0;
>>
>>  unmap:
>> --
>> 2.7.4
>>
> 
> --
> Alexandre Belloni, Bootlin
> Embedded Linux and Kernel engineering
> https://bootlin.com
> 

Re: [PATCH 3/3] power: reset: at91-sama5d2_shdwc: add support for sama7g5

[Claudiu.Beznea]

On 16.12.2020 15:45, Alexandre Belloni wrote:
> EXTERNAL EMAIL: Do not click links or open attachments unless you know the content is safe
> 
> On 16/12/2020 14:57:33+0200, Claudiu Beznea wrote:
>> Add support for SAMA7G5 by adding proper struct reg_config structure
>> and since SAMA7G5 is not currently on LPDDR setups the commit also
>> avoid the mapping of DDR controller.
>>
> 
> Honestly, I wouldn't leave the LPDDR part out because there is no
> guarantee anyone will think about it when they have a design with LPDDR
> and as a consequence, their device will behave properly but will be
> very short lived.

The idea wasn't to leave it out. It has to be handled differently on
SAMA7G5 as it embeds a different DDR controller and at the moment we have
no setup with LPDDR.

Thank you,
Claudiu

> 
>> Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com>
>> ---
>>  drivers/power/reset/at91-sama5d2_shdwc.c | 72 ++++++++++++++++++++++++--------
>>  1 file changed, 54 insertions(+), 18 deletions(-)
>>
>> diff --git a/drivers/power/reset/at91-sama5d2_shdwc.c b/drivers/power/reset/at91-sama5d2_shdwc.c
>> index 3996167f676f..a3342c8c3728 100644
>> --- a/drivers/power/reset/at91-sama5d2_shdwc.c
>> +++ b/drivers/power/reset/at91-sama5d2_shdwc.c
>> @@ -78,9 +78,15 @@ struct pmc_reg_config {
>>       u8 mckr;
>>  };
>>
>> +struct ddrc_reg_config {
>> +     u32 type_offset;
>> +     u32 type_mask;
>> +};
>> +
>>  struct reg_config {
>>       struct shdwc_reg_config shdwc;
>>       struct pmc_reg_config pmc;
>> +     struct ddrc_reg_config ddrc;
>>  };
>>
>>  struct shdwc {
>> @@ -262,6 +268,10 @@ static const struct reg_config sama5d2_reg_config = {
>>       .pmc = {
>>               .mckr           = 0x30,
>>       },
>> +     .ddrc = {
>> +             .type_offset    = AT91_DDRSDRC_MDR,
>> +             .type_mask      = AT91_DDRSDRC_MD
>> +     },
>>  };
>>
>>  static const struct reg_config sam9x60_reg_config = {
>> @@ -275,6 +285,23 @@ static const struct reg_config sam9x60_reg_config = {
>>       .pmc = {
>>               .mckr           = 0x28,
>>       },
>> +     .ddrc = {
>> +             .type_offset    = AT91_DDRSDRC_MDR,
>> +             .type_mask      = AT91_DDRSDRC_MD
>> +     },
>> +};
>> +
>> +static const struct reg_config sama7g5_reg_config = {
>> +     .shdwc = {
>> +             .wkup_pin_input = 0,
>> +             .mr_rtcwk_shift = 17,
>> +             .mr_rttwk_shift = 16,
>> +             .sr_rtcwk_shift = 5,
>> +             .sr_rttwk_shift = 4,
>> +     },
>> +     .pmc = {
>> +             .mckr           = 0x28,
>> +     },
>>  };
>>
>>  static const struct of_device_id at91_shdwc_of_match[] = {
>> @@ -285,6 +312,10 @@ static const struct of_device_id at91_shdwc_of_match[] = {
>>       {
>>               .compatible = "microchip,sam9x60-shdwc",
>>               .data = &sam9x60_reg_config,
>> +     },
>> +     {
>> +             .compatible = "microchip,sama7g5-shdwc",
>> +             .data = &sama7g5_reg_config,
>>       }, {
>>               /*sentinel*/
>>       }
>> @@ -294,6 +325,7 @@ MODULE_DEVICE_TABLE(of, at91_shdwc_of_match);
>>  static const struct of_device_id at91_pmc_ids[] = {
>>       { .compatible = "atmel,sama5d2-pmc" },
>>       { .compatible = "microchip,sam9x60-pmc" },
>> +     { .compatible = "microchip,sama7g5-pmc" },
>>       { /* Sentinel. */ }
>>  };
>>
>> @@ -355,30 +387,34 @@ static int __init at91_shdwc_probe(struct platform_device *pdev)
>>               goto clk_disable;
>>       }
>>
>> -     np = of_find_compatible_node(NULL, NULL, "atmel,sama5d3-ddramc");
>> -     if (!np) {
>> -             ret = -ENODEV;
>> -             goto unmap;
>> -     }
>> +     if (at91_shdwc->rcfg->ddrc.type_mask) {
>> +             np = of_find_compatible_node(NULL, NULL,
>> +                                          "atmel,sama5d3-ddramc");
>> +             if (!np) {
>> +                     ret = -ENODEV;
>> +                     goto unmap;
>> +             }
>>
>> -     at91_shdwc->mpddrc_base = of_iomap(np, 0);
>> -     of_node_put(np);
>> +             at91_shdwc->mpddrc_base = of_iomap(np, 0);
>> +             of_node_put(np);
>>
>> -     if (!at91_shdwc->mpddrc_base) {
>> -             ret = -ENOMEM;
>> -             goto unmap;
>> +             if (!at91_shdwc->mpddrc_base) {
>> +                     ret = -ENOMEM;
>> +                     goto unmap;
>> +             }
>> +
>> +             ddr_type = readl(at91_shdwc->mpddrc_base +
>> +                              at91_shdwc->rcfg->ddrc.type_offset) &
>> +                              at91_shdwc->rcfg->ddrc.type_mask;
>> +             if (ddr_type != AT91_DDRSDRC_MD_LPDDR2 &&
>> +                 ddr_type != AT91_DDRSDRC_MD_LPDDR3) {
>> +                     iounmap(at91_shdwc->mpddrc_base);
>> +                     at91_shdwc->mpddrc_base = NULL;
>> +             }
>>       }
>>
>>       pm_power_off = at91_poweroff;
>>
>> -     ddr_type = readl(at91_shdwc->mpddrc_base + AT91_DDRSDRC_MDR) &
>> -                      AT91_DDRSDRC_MD;
>> -     if (ddr_type != AT91_DDRSDRC_MD_LPDDR2 &&
>> -         ddr_type != AT91_DDRSDRC_MD_LPDDR3) {
>> -             iounmap(at91_shdwc->mpddrc_base);
>> -             at91_shdwc->mpddrc_base = NULL;
>> -     }
>> -
>>       return 0;
>>
>>  unmap:
>> --
>> 2.7.4
>>
> 
> --
> Alexandre Belloni, Bootlin
> Embedded Linux and Kernel engineering
> https://bootlin.com
> 
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

Re: [PATCH 0/3] power: reset: at91-sama5d2_shdwc: add support for SAMA7G5

[Sebastian Reichel]

[-- Attachment #1: Type: text/plain, Size: 615 bytes --]

Hi,

On Wed, Dec 16, 2020 at 02:57:30PM +0200, Claudiu Beznea wrote:
> This series adds support for SAMA7G5 shutdown controller.
> 
> Thank you,
> Claudiu Beznea
> 
> Claudiu Beznea (3):
>   power: reset: at91-sama5d2_shdwc: fix wkupdbc mask
>   dt-bindings: atmel-sysreg: add microchip,sama7g5-shdwc
>   power: reset: at91-sama5d2_shdwc: add support for sama7g5
> 
>  .../devicetree/bindings/arm/atmel-sysregs.txt      |  5 +-
>  drivers/power/reset/at91-sama5d2_shdwc.c           | 74 ++++++++++++++++------
>  2 files changed, 58 insertions(+), 21 deletions(-)

Thanks, queued.

-- Sebastian

[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 833 bytes --]

Re: [PATCH 0/3] power: reset: at91-sama5d2_shdwc: add support for SAMA7G5

[Sebastian Reichel]

[-- Attachment #1.1: Type: text/plain, Size: 615 bytes --]

Hi,

On Wed, Dec 16, 2020 at 02:57:30PM +0200, Claudiu Beznea wrote:
> This series adds support for SAMA7G5 shutdown controller.
> 
> Thank you,
> Claudiu Beznea
> 
> Claudiu Beznea (3):
>   power: reset: at91-sama5d2_shdwc: fix wkupdbc mask
>   dt-bindings: atmel-sysreg: add microchip,sama7g5-shdwc
>   power: reset: at91-sama5d2_shdwc: add support for sama7g5
> 
>  .../devicetree/bindings/arm/atmel-sysregs.txt      |  5 +-
>  drivers/power/reset/at91-sama5d2_shdwc.c           | 74 ++++++++++++++++------
>  2 files changed, 58 insertions(+), 21 deletions(-)

Thanks, queued.

-- Sebastian

[-- Attachment #1.2: signature.asc --]
[-- Type: application/pgp-signature, Size: 833 bytes --]

[-- Attachment #2: Type: text/plain, Size: 176 bytes --]

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel