From: Marek Szyprowski <m.szyprowski@samsung.com> To: u-boot@lists.denx.de Subject: [PATCH v4 2/3] button: add a simple Analog to Digital Converter device based button driver Date: Tue, 22 Dec 2020 09:56:32 +0100 [thread overview] Message-ID: <20201222085633.10194-3-m.szyprowski@samsung.com> (raw) In-Reply-To: <20201222085633.10194-1-m.szyprowski@samsung.com> Add a simple Analog to Digital Converter device based button driver. This driver binds to the 'adc-keys' device tree node. Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> --- drivers/button/Kconfig | 8 +++ drivers/button/Makefile | 1 + drivers/button/button-adc.c | 121 ++++++++++++++++++++++++++++++++++++ 3 files changed, 130 insertions(+) create mode 100644 drivers/button/button-adc.c diff --git a/drivers/button/Kconfig b/drivers/button/Kconfig index 6b3ec7e55d..6db3c5e93a 100644 --- a/drivers/button/Kconfig +++ b/drivers/button/Kconfig @@ -9,6 +9,14 @@ config BUTTON can provide access to board-specific buttons. Use of the device tree for configuration is encouraged. +config BUTTON_ADC + bool "Button adc" + depends on BUTTON + help + Enable support for buttons which are connected to Analog to Digital + Converter device. The ADC driver must use driver model. Buttons are + configured using the device tree. + config BUTTON_GPIO bool "Button gpio" depends on BUTTON diff --git a/drivers/button/Makefile b/drivers/button/Makefile index fcc10ebe8d..bbd18af149 100644 --- a/drivers/button/Makefile +++ b/drivers/button/Makefile @@ -3,4 +3,5 @@ # Copyright (C) 2020 Philippe Reynes <philippe.reynes@softathome.com> obj-$(CONFIG_BUTTON) += button-uclass.o +obj-$(CONFIG_BUTTON_ADC) += button-adc.o obj-$(CONFIG_BUTTON_GPIO) += button-gpio.o diff --git a/drivers/button/button-adc.c b/drivers/button/button-adc.c new file mode 100644 index 0000000000..bf99dd8b43 --- /dev/null +++ b/drivers/button/button-adc.c @@ -0,0 +1,121 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Copyright (C) 2020 Samsung Electronics Co., Ltd. + * http://www.samsung.com + * Author: Marek Szyprowski <m.szyprowski@samsung.com> + */ + +#include <common.h> +#include <adc.h> +#include <button.h> +#include <dm.h> +#include <dm/lists.h> +#include <dm/uclass-internal.h> + +/** + * struct button_adc_priv - private data for button-adc driver. + * + * @adc: Analog to Digital Converter device to which button is connected. + * @channel: channel of the ADC device to probe the button state. + */ +struct button_adc_priv { + struct udevice *adc; + int channel; +}; + +static enum button_state_t button_adc_get_state(struct udevice *dev) +{ + struct button_adc_priv *priv = dev_get_priv(dev); + unsigned int val, mask; + int ret; + + ret = adc_start_channel(priv->adc, priv->channel); + if (ret) + return ret; + + ret = adc_channel_data(priv->adc, priv->channel, &val); + if (ret) + return ret; + + ret = adc_data_mask(priv->adc, &mask); + if (ret) + return ret; + + /* getting state is simplified a bit */ + if (ret == 0) + return (val < mask / 2) ? BUTTON_ON : BUTTON_OFF; + + return ret; +} + +static int button_adc_probe(struct udevice *dev) +{ + struct button_uc_plat *uc_plat = dev_get_uclass_platdata(dev); + struct button_adc_priv *priv = dev_get_priv(dev); + struct ofnode_phandle_args args; + int ret; + + /* Ignore the top-level button node */ + if (!uc_plat->label) + return 0; + + ret = dev_read_phandle_with_args(dev->parent, "io-channels", + "#io-channel-cells", 0, 0, &args); + if (ret) + return ret; + + ret = uclass_get_device_by_ofnode(UCLASS_ADC, args.node, &priv->adc); + if (ret) + return ret; + + priv->channel = args.args[0]; + + return ret; +} + +static int button_adc_bind(struct udevice *parent) +{ + struct udevice *dev; + ofnode node; + int ret; + + dev_for_each_subnode(node, parent) { + struct button_uc_plat *uc_plat; + const char *label; + + label = ofnode_read_string(node, "label"); + if (!label) { + debug("%s: node %s has no label\n", __func__, + ofnode_get_name(node)); + return -EINVAL; + } + ret = device_bind_driver_to_node(parent, "button_adc", + ofnode_get_name(node), + node, &dev); + if (ret) + return ret; + uc_plat = dev_get_uclass_platdata(dev); + uc_plat->label = label; + } + + return 0; +} + +static const struct button_ops button_adc_ops = { + .get_state = button_adc_get_state, +}; + +static const struct udevice_id button_adc_ids[] = { + { .compatible = "adc-keys" }, + { } +}; + +U_BOOT_DRIVER(button_adc) = { + .name = "button_adc", + .id = UCLASS_BUTTON, + .of_match = button_adc_ids, + .ops = &button_adc_ops, + .priv_auto_alloc_size = sizeof(struct button_adc_priv), + .bind = button_adc_bind, + .probe = button_adc_probe, +}; -- 2.17.1
WARNING: multiple messages have this Message-ID (diff)
From: Marek Szyprowski <m.szyprowski@samsung.com> To: u-boot@lists.denx.de, u-boot-amlogic@groups.io Cc: Marek Szyprowski <m.szyprowski@samsung.com>, Neil Armstrong <narmstrong@baylibre.com>, Lukasz Majewski <lukma@denx.de>, Philippe Reynes <philippe.reynes@softathome.com>, Simon Glass <sjg@chromium.org>, Heinrich Schuchardt <xypron.glpk@gmx.de>, Jaehoon Chung <jh80.chung@samsung.com>, Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com> Subject: [PATCH v4 2/3] button: add a simple Analog to Digital Converter device based button driver Date: Tue, 22 Dec 2020 09:56:32 +0100 [thread overview] Message-ID: <20201222085633.10194-3-m.szyprowski@samsung.com> (raw) In-Reply-To: <20201222085633.10194-1-m.szyprowski@samsung.com> Add a simple Analog to Digital Converter device based button driver. This driver binds to the 'adc-keys' device tree node. Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> --- drivers/button/Kconfig | 8 +++ drivers/button/Makefile | 1 + drivers/button/button-adc.c | 121 ++++++++++++++++++++++++++++++++++++ 3 files changed, 130 insertions(+) create mode 100644 drivers/button/button-adc.c diff --git a/drivers/button/Kconfig b/drivers/button/Kconfig index 6b3ec7e55d..6db3c5e93a 100644 --- a/drivers/button/Kconfig +++ b/drivers/button/Kconfig @@ -9,6 +9,14 @@ config BUTTON can provide access to board-specific buttons. Use of the device tree for configuration is encouraged. +config BUTTON_ADC + bool "Button adc" + depends on BUTTON + help + Enable support for buttons which are connected to Analog to Digital + Converter device. The ADC driver must use driver model. Buttons are + configured using the device tree. + config BUTTON_GPIO bool "Button gpio" depends on BUTTON diff --git a/drivers/button/Makefile b/drivers/button/Makefile index fcc10ebe8d..bbd18af149 100644 --- a/drivers/button/Makefile +++ b/drivers/button/Makefile @@ -3,4 +3,5 @@ # Copyright (C) 2020 Philippe Reynes <philippe.reynes@softathome.com> obj-$(CONFIG_BUTTON) += button-uclass.o +obj-$(CONFIG_BUTTON_ADC) += button-adc.o obj-$(CONFIG_BUTTON_GPIO) += button-gpio.o diff --git a/drivers/button/button-adc.c b/drivers/button/button-adc.c new file mode 100644 index 0000000000..bf99dd8b43 --- /dev/null +++ b/drivers/button/button-adc.c @@ -0,0 +1,121 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Copyright (C) 2020 Samsung Electronics Co., Ltd. + * http://www.samsung.com + * Author: Marek Szyprowski <m.szyprowski@samsung.com> + */ + +#include <common.h> +#include <adc.h> +#include <button.h> +#include <dm.h> +#include <dm/lists.h> +#include <dm/uclass-internal.h> + +/** + * struct button_adc_priv - private data for button-adc driver. + * + * @adc: Analog to Digital Converter device to which button is connected. + * @channel: channel of the ADC device to probe the button state. + */ +struct button_adc_priv { + struct udevice *adc; + int channel; +}; + +static enum button_state_t button_adc_get_state(struct udevice *dev) +{ + struct button_adc_priv *priv = dev_get_priv(dev); + unsigned int val, mask; + int ret; + + ret = adc_start_channel(priv->adc, priv->channel); + if (ret) + return ret; + + ret = adc_channel_data(priv->adc, priv->channel, &val); + if (ret) + return ret; + + ret = adc_data_mask(priv->adc, &mask); + if (ret) + return ret; + + /* getting state is simplified a bit */ + if (ret == 0) + return (val < mask / 2) ? BUTTON_ON : BUTTON_OFF; + + return ret; +} + +static int button_adc_probe(struct udevice *dev) +{ + struct button_uc_plat *uc_plat = dev_get_uclass_platdata(dev); + struct button_adc_priv *priv = dev_get_priv(dev); + struct ofnode_phandle_args args; + int ret; + + /* Ignore the top-level button node */ + if (!uc_plat->label) + return 0; + + ret = dev_read_phandle_with_args(dev->parent, "io-channels", + "#io-channel-cells", 0, 0, &args); + if (ret) + return ret; + + ret = uclass_get_device_by_ofnode(UCLASS_ADC, args.node, &priv->adc); + if (ret) + return ret; + + priv->channel = args.args[0]; + + return ret; +} + +static int button_adc_bind(struct udevice *parent) +{ + struct udevice *dev; + ofnode node; + int ret; + + dev_for_each_subnode(node, parent) { + struct button_uc_plat *uc_plat; + const char *label; + + label = ofnode_read_string(node, "label"); + if (!label) { + debug("%s: node %s has no label\n", __func__, + ofnode_get_name(node)); + return -EINVAL; + } + ret = device_bind_driver_to_node(parent, "button_adc", + ofnode_get_name(node), + node, &dev); + if (ret) + return ret; + uc_plat = dev_get_uclass_platdata(dev); + uc_plat->label = label; + } + + return 0; +} + +static const struct button_ops button_adc_ops = { + .get_state = button_adc_get_state, +}; + +static const struct udevice_id button_adc_ids[] = { + { .compatible = "adc-keys" }, + { } +}; + +U_BOOT_DRIVER(button_adc) = { + .name = "button_adc", + .id = UCLASS_BUTTON, + .of_match = button_adc_ids, + .ops = &button_adc_ops, + .priv_auto_alloc_size = sizeof(struct button_adc_priv), + .bind = button_adc_bind, + .probe = button_adc_probe, +}; -- 2.17.1
next prev parent reply other threads:[~2020-12-22 8:56 UTC|newest] Thread overview: 26+ messages / expand[flat|nested] mbox.gz Atom feed top [not found] <CGME20201222085638eucas1p158d91ce4a22d13623b19706b26374078@eucas1p1.samsung.com> 2020-12-22 8:56 ` [PATCH v4 0/3] VIM3: add support for checking 'Function' button state Marek Szyprowski 2020-12-22 8:56 ` Marek Szyprowski [not found] ` <CGME20201222085638eucas1p14d9d9da136593a12fea0140c403095c4@eucas1p1.samsung.com> 2020-12-22 8:56 ` [PATCH v4 1/3] dt-bindings: input: adc-keys bindings documentation Marek Szyprowski 2020-12-22 8:56 ` Marek Szyprowski 2020-12-22 10:12 ` Heinrich Schuchardt 2020-12-22 10:12 ` Heinrich Schuchardt 2020-12-22 11:28 ` Heinrich Schuchardt 2020-12-22 11:28 ` Heinrich Schuchardt 2021-01-18 12:45 ` Heinrich Schuchardt 2021-01-18 12:45 ` Heinrich Schuchardt [not found] ` <CGME20201222085639eucas1p1db16b6bc2ae790ed711a09bcc5f176e5@eucas1p1.samsung.com> 2020-12-22 8:56 ` Marek Szyprowski [this message] 2020-12-22 8:56 ` [PATCH v4 2/3] button: add a simple Analog to Digital Converter device based button driver Marek Szyprowski 2020-12-22 9:45 ` Heinrich Schuchardt 2020-12-22 9:45 ` Heinrich Schuchardt 2020-12-29 3:31 ` Simon Glass 2020-12-29 3:31 ` Simon Glass [not found] ` <CGME20201222085640eucas1p295da269be60f5193ebd2ebc027a668d2@eucas1p2.samsung.com> 2020-12-22 8:56 ` [PATCH v4 3/3] configs: khadas-vim3(l): enable Function button support Marek Szyprowski 2020-12-22 8:56 ` Marek Szyprowski 2021-01-18 10:24 ` [PATCH v4 0/3] VIM3: add support for checking 'Function' button state Neil Armstrong 2021-01-18 10:24 ` Neil Armstrong 2021-01-18 12:48 ` Heinrich Schuchardt 2021-01-18 12:48 ` Heinrich Schuchardt 2021-01-18 12:55 ` Neil Armstrong 2021-01-18 12:55 ` Neil Armstrong 2021-01-22 12:42 ` Marek Szyprowski 2021-01-22 12:42 ` Marek Szyprowski
Reply instructions: You may reply publicly to this message via plain-text email using any one of the following methods: * Save the following mbox file, import it into your mail client, and reply-to-all from there: mbox Avoid top-posting and favor interleaved quoting: https://en.wikipedia.org/wiki/Posting_style#Interleaved_style * Reply using the --to, --cc, and --in-reply-to switches of git-send-email(1): git send-email \ --in-reply-to=20201222085633.10194-3-m.szyprowski@samsung.com \ --to=m.szyprowski@samsung.com \ --cc=u-boot@lists.denx.de \ /path/to/YOUR_REPLY https://kernel.org/pub/software/scm/git/docs/git-send-email.html * If your mail client supports setting the In-Reply-To header via mailto: links, try the mailto: linkBe sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.