[PATCH AUTOSEL 4.4 01/38] locks: Fix UBSAN undefined behaviour in flock64_to_posix_lock

[PATCH AUTOSEL 4.4 01/38] locks: Fix UBSAN undefined behaviour in flock64_to_posix_lock

[Sasha Levin]

From: Luo Meng <luomeng12@huawei.com>

[ Upstream commit 16238415eb9886328a89fe7a3cb0b88c7335fe16 ]

When the sum of fl->fl_start and l->l_len overflows,
UBSAN shows the following warning:

UBSAN: Undefined behaviour in fs/locks.c:482:29
signed integer overflow: 2 + 9223372036854775806
cannot be represented in type 'long long int'
Call Trace:
 __dump_stack lib/dump_stack.c:77 [inline]
 dump_stack+0xe4/0x14e lib/dump_stack.c:118
 ubsan_epilogue+0xe/0x81 lib/ubsan.c:161
 handle_overflow+0x193/0x1e2 lib/ubsan.c:192
 flock64_to_posix_lock fs/locks.c:482 [inline]
 flock_to_posix_lock+0x595/0x690 fs/locks.c:515
 fcntl_setlk+0xf3/0xa90 fs/locks.c:2262
 do_fcntl+0x456/0xf60 fs/fcntl.c:387
 __do_sys_fcntl fs/fcntl.c:483 [inline]
 __se_sys_fcntl fs/fcntl.c:468 [inline]
 __x64_sys_fcntl+0x12d/0x180 fs/fcntl.c:468
 do_syscall_64+0xc8/0x5a0 arch/x86/entry/common.c:293
 entry_SYSCALL_64_after_hwframe+0x49/0xbe

Fix it by parenthesizing 'l->l_len - 1'.

Signed-off-by: Luo Meng <luomeng12@huawei.com>
Signed-off-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 fs/locks.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/fs/locks.c b/fs/locks.c
index 2c8e1e429cf7e..5cb012e4a2fc4 100644
--- a/fs/locks.c
+++ b/fs/locks.c
@@ -434,7 +434,7 @@ static int flock64_to_posix_lock(struct file *filp, struct file_lock *fl,
 	if (l->l_len > 0) {
 		if (l->l_len - 1 > OFFSET_MAX - fl->fl_start)
 			return -EOVERFLOW;
-		fl->fl_end = fl->fl_start + l->l_len - 1;
+		fl->fl_end = fl->fl_start + (l->l_len - 1);
 
 	} else if (l->l_len < 0) {
 		if (fl->fl_start + l->l_len < 0)
-- 
2.27.0

[PATCH AUTOSEL 4.4 02/38] tomoyo: fix clang pointer arithmetic warning

[Sasha Levin]

From: Arnd Bergmann <arnd@arndb.de>

[ Upstream commit d9594e0409651a237903a13c9718df889f43d43b ]

clang warns about additions on NULL pointers being undefined in C:

security/tomoyo/securityfs_if.c:226:59: warning: arithmetic on a null pointer treated as a cast from integer to pointer is a GNU extension [-Wnull-pointer-arithmetic]
        securityfs_create_file(name, mode, parent, ((u8 *) NULL) + key,

Change the code to instead use a cast through uintptr_t to avoid
the warning.

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 security/tomoyo/securityfs_if.c | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

diff --git a/security/tomoyo/securityfs_if.c b/security/tomoyo/securityfs_if.c
index 179a955b319df..1e6a4ed5ae54d 100644
--- a/security/tomoyo/securityfs_if.c
+++ b/security/tomoyo/securityfs_if.c
@@ -135,8 +135,8 @@ static const struct file_operations tomoyo_self_operations = {
  */
 static int tomoyo_open(struct inode *inode, struct file *file)
 {
-	const int key = ((u8 *) file_inode(file)->i_private)
-		- ((u8 *) NULL);
+	const u8 key = (uintptr_t) file_inode(file)->i_private;
+
 	return tomoyo_open_control(key, file);
 }
 
@@ -227,7 +227,7 @@ static const struct file_operations tomoyo_operations = {
 static void __init tomoyo_create_entry(const char *name, const umode_t mode,
 				       struct dentry *parent, const u8 key)
 {
-	securityfs_create_file(name, mode, parent, ((u8 *) NULL) + key,
+	securityfs_create_file(name, mode, parent, (void *) (uintptr_t) key,
 			       &tomoyo_operations);
 }
 
-- 
2.27.0

[PATCH AUTOSEL 4.4 03/38] staging: wimax: depends on NET

[Sasha Levin]

From: Randy Dunlap <rdunlap@infradead.org>

[ Upstream commit 9364a2cf567187c0a075942c22d1f434c758de5d ]

Fix build errors when CONFIG_NET is not enabled. E.g. (trimmed):

ld: drivers/staging/wimax/op-msg.o: in function `wimax_msg_alloc':
op-msg.c:(.text+0xa9): undefined reference to `__alloc_skb'
ld: op-msg.c:(.text+0xcc): undefined reference to `genlmsg_put'
ld: op-msg.c:(.text+0xfc): undefined reference to `nla_put'
ld: op-msg.c:(.text+0x168): undefined reference to `kfree_skb'
ld: drivers/staging/wimax/op-msg.o: in function `wimax_msg_data_len':
op-msg.c:(.text+0x1ba): undefined reference to `nla_find'
ld: drivers/staging/wimax/op-msg.o: in function `wimax_msg_send':
op-msg.c:(.text+0x311): undefined reference to `init_net'
ld: op-msg.c:(.text+0x326): undefined reference to `netlink_broadcast'
ld: drivers/staging/wimax/stack.o: in function `__wimax_state_change':
stack.c:(.text+0x433): undefined reference to `netif_carrier_off'
ld: stack.c:(.text+0x46b): undefined reference to `netif_carrier_on'
ld: stack.c:(.text+0x478): undefined reference to `netif_tx_wake_queue'
ld: drivers/staging/wimax/stack.o: in function `wimax_subsys_exit':
stack.c:(.exit.text+0xe): undefined reference to `genl_unregister_family'
ld: drivers/staging/wimax/stack.o: in function `wimax_subsys_init':
stack.c:(.init.text+0x1a): undefined reference to `genl_register_family'

Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Jakub Kicinski <kuba@kernel.org>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: netdev@vger.kernel.org
Acked-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Link: https://lore.kernel.org/r/20201102072456.20303-1-rdunlap@infradead.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 net/wimax/Kconfig | 1 +
 1 file changed, 1 insertion(+)

diff --git a/net/wimax/Kconfig b/net/wimax/Kconfig
index e4d97ab476d58..945bdf4738eb6 100644
--- a/net/wimax/Kconfig
+++ b/net/wimax/Kconfig
@@ -4,6 +4,7 @@
 
 menuconfig WIMAX
 	tristate "WiMAX Wireless Broadband support"
+	depends on NET
 	depends on RFKILL || !RFKILL
 	help
 
-- 
2.27.0

[PATCH AUTOSEL 4.4 04/38] scsi: pm80xx: Avoid busywait in FW ready check

[Sasha Levin]

From: akshatzen <akshatzen@google.com>

[ Upstream commit 48cd6b38eb4f2874f091c4776ea1c26e7e4f967e ]

In function check_fw_ready() we busy wait using udelay. The CPU is not
released and we see need_resched failures.

Busy waiting is not necessary since we are in process context and we can
sleep instead. Replace udelay with msleep of 20 ms intervals while waiting
for firmware to become ready.

It has been verified that check_fw_ready is not being used in interrupt
context anywhere, hence it is safe to make this change.

Link: https://lore.kernel.org/r/20201102165528.26510-4-Viswas.G@microchip.com.com
Acked-by: Jack Wang <jinpu.wang@cloud.ionos.com>
Signed-off-by: akshatzen <akshatzen@google.com>
Signed-off-by: Viswas G <Viswas.G@microchip.com>
Signed-off-by: Ruksar Devadi <Ruksar.devadi@microchip.com>
Signed-off-by: Radha Ramachandran <radha@google.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/scsi/pm8001/pm80xx_hwi.c | 21 +++++++++++----------
 drivers/scsi/pm8001/pm80xx_hwi.h |  6 ++++++
 2 files changed, 17 insertions(+), 10 deletions(-)

diff --git a/drivers/scsi/pm8001/pm80xx_hwi.c b/drivers/scsi/pm8001/pm80xx_hwi.c
index df5f0bc295875..50e0890ddc678 100644
--- a/drivers/scsi/pm8001/pm80xx_hwi.c
+++ b/drivers/scsi/pm8001/pm80xx_hwi.c
@@ -692,6 +692,7 @@ static int mpi_init_check(struct pm8001_hba_info *pm8001_ha)
 
 /**
  * check_fw_ready - The LLDD check if the FW is ready, if not, return error.
+ * This function sleeps hence it must not be used in atomic context.
  * @pm8001_ha: our hba card information
  */
 static int check_fw_ready(struct pm8001_hba_info *pm8001_ha)
@@ -702,16 +703,16 @@ static int check_fw_ready(struct pm8001_hba_info *pm8001_ha)
 	int ret = 0;
 
 	/* reset / PCIe ready */
-	max_wait_time = max_wait_count = 100 * 1000;	/* 100 milli sec */
+	max_wait_time = max_wait_count = 5;	/* 100 milli sec */
 	do {
-		udelay(1);
+		msleep(FW_READY_INTERVAL);
 		value = pm8001_cr32(pm8001_ha, 0, MSGU_SCRATCH_PAD_1);
 	} while ((value == 0xFFFFFFFF) && (--max_wait_count));
 
 	/* check ila status */
-	max_wait_time = max_wait_count = 1000 * 1000;	/* 1000 milli sec */
+	max_wait_time = max_wait_count = 50;	/* 1000 milli sec */
 	do {
-		udelay(1);
+		msleep(FW_READY_INTERVAL);
 		value = pm8001_cr32(pm8001_ha, 0, MSGU_SCRATCH_PAD_1);
 	} while (((value & SCRATCH_PAD_ILA_READY) !=
 			SCRATCH_PAD_ILA_READY) && (--max_wait_count));
@@ -724,9 +725,9 @@ static int check_fw_ready(struct pm8001_hba_info *pm8001_ha)
 	}
 
 	/* check RAAE status */
-	max_wait_time = max_wait_count = 1800 * 1000;	/* 1800 milli sec */
+	max_wait_time = max_wait_count = 90;	/* 1800 milli sec */
 	do {
-		udelay(1);
+		msleep(FW_READY_INTERVAL);
 		value = pm8001_cr32(pm8001_ha, 0, MSGU_SCRATCH_PAD_1);
 	} while (((value & SCRATCH_PAD_RAAE_READY) !=
 				SCRATCH_PAD_RAAE_READY) && (--max_wait_count));
@@ -739,9 +740,9 @@ static int check_fw_ready(struct pm8001_hba_info *pm8001_ha)
 	}
 
 	/* check iop0 status */
-	max_wait_time = max_wait_count = 600 * 1000;	/* 600 milli sec */
+	max_wait_time = max_wait_count = 30;	/* 600 milli sec */
 	do {
-		udelay(1);
+		msleep(FW_READY_INTERVAL);
 		value = pm8001_cr32(pm8001_ha, 0, MSGU_SCRATCH_PAD_1);
 	} while (((value & SCRATCH_PAD_IOP0_READY) != SCRATCH_PAD_IOP0_READY) &&
 			(--max_wait_count));
@@ -757,9 +758,9 @@ static int check_fw_ready(struct pm8001_hba_info *pm8001_ha)
 	if ((pm8001_ha->chip_id != chip_8008) &&
 			(pm8001_ha->chip_id != chip_8009)) {
 		/* 200 milli sec */
-		max_wait_time = max_wait_count = 200 * 1000;
+		max_wait_time = max_wait_count = 10;
 		do {
-			udelay(1);
+			msleep(FW_READY_INTERVAL);
 			value = pm8001_cr32(pm8001_ha, 0, MSGU_SCRATCH_PAD_1);
 		} while (((value & SCRATCH_PAD_IOP1_READY) !=
 				SCRATCH_PAD_IOP1_READY) && (--max_wait_count));
diff --git a/drivers/scsi/pm8001/pm80xx_hwi.h b/drivers/scsi/pm8001/pm80xx_hwi.h
index 411b414a9a0ef..85cdd6d9348a6 100644
--- a/drivers/scsi/pm8001/pm80xx_hwi.h
+++ b/drivers/scsi/pm8001/pm80xx_hwi.h
@@ -1534,3 +1534,9 @@ typedef struct SASProtocolTimerConfig SASProtocolTimerConfig_t;
 
 #define MEMBASE_II_SHIFT_REGISTER       0x1010
 #endif
+
+/**
+ * As we know sleep (1~20) ms may result in sleep longer than ~20 ms, hence we
+ * choose 20 ms interval.
+ */
+#define FW_READY_INTERVAL	20
-- 
2.27.0

[PATCH AUTOSEL 4.4 05/38] scsi: pm80xx: Fix pm8001_mpi_get_nvmd_resp() race condition

[Sasha Levin]

From: yuuzheng <yuuzheng@google.com>

[ Upstream commit 1f889b58716a5f5e3e4fe0e6742c1a4472f29ac1 ]

A use-after-free or null-pointer error occurs when the 251-byte response
data is copied from IOMB buffer to response message buffer in function
pm8001_mpi_get_nvmd_resp().

After sending the command get_nvmd_data(), the caller begins to sleep by
calling wait_for_complete() and waits for the wake-up from calling
complete() in pm8001_mpi_get_nvmd_resp(). Due to unexpected events (e.g.,
interrupt), if response buffer gets freed before memcpy(), a use-after-free
error will occur. To fix this, the complete() should be called after
memcpy().

Link: https://lore.kernel.org/r/20201102165528.26510-5-Viswas.G@microchip.com.com
Acked-by: Jack Wang <jinpu.wang@cloud.ionos.com>
Signed-off-by: yuuzheng <yuuzheng@google.com>
Signed-off-by: Viswas G <Viswas.G@microchip.com>
Signed-off-by: Ruksar Devadi <Ruksar.devadi@microchip.com>
Signed-off-by: Radha Ramachandran <radha@google.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/scsi/pm8001/pm8001_hwi.c | 7 ++++++-
 1 file changed, 6 insertions(+), 1 deletion(-)

diff --git a/drivers/scsi/pm8001/pm8001_hwi.c b/drivers/scsi/pm8001/pm8001_hwi.c
index b3490b4a046a2..d431efb300b6f 100644
--- a/drivers/scsi/pm8001/pm8001_hwi.c
+++ b/drivers/scsi/pm8001/pm8001_hwi.c
@@ -3196,10 +3196,15 @@ pm8001_mpi_get_nvmd_resp(struct pm8001_hba_info *pm8001_ha, void *piomb)
 		pm8001_ha->memoryMap.region[NVMD].virt_ptr,
 		fw_control_context->len);
 	kfree(ccb->fw_control_context);
+	/* To avoid race condition, complete should be
+	 * called after the message is copied to
+	 * fw_control_context->usrAddr
+	 */
+	complete(pm8001_ha->nvmd_completion);
+	PM8001_MSG_DBG(pm8001_ha, pm8001_printk("Set nvm data complete!\n"));
 	ccb->task = NULL;
 	ccb->ccb_tag = 0xFFFFFFFF;
 	pm8001_tag_free(pm8001_ha, tag);
-	complete(pm8001_ha->nvmd_completion);
 }
 
 int pm8001_mpi_local_phy_ctl(struct pm8001_hba_info *pm8001_ha, void *piomb)
-- 
2.27.0

[PATCH AUTOSEL 4.4 06/38] staging: rtl8192u: fix wrong judgement in rtl8192_rx_isr

[Sasha Levin]

From: Zhang Qilong <zhangqilong3@huawei.com>

[ Upstream commit 071dc1787a2f8bb636f864c1f306280deea3b1d5 ]

The 'EPERM' cannot appear in the previous path, we
should use '-EPERM' to check it. For example:

Call trace:
->rtl8192_rx_isr
    ->usb_submit_urb
       ->usb_hcd_submit_urb
           ->rh_urb_enqueue
	       ->rh_queue_status
	           ->usb_hcd_link_urb_to_ep

Signed-off-by: Zhang Qilong <zhangqilong3@huawei.com>
Link: https://lore.kernel.org/r/20201028122648.47959-1-zhangqilong3@huawei.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/staging/rtl8192u/r8192U_core.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/staging/rtl8192u/r8192U_core.c b/drivers/staging/rtl8192u/r8192U_core.c
index 1e0d2a33787e1..89ce39872ffec 100644
--- a/drivers/staging/rtl8192u/r8192U_core.c
+++ b/drivers/staging/rtl8192u/r8192U_core.c
@@ -1003,7 +1003,7 @@ static void rtl8192_rx_isr(struct urb *urb)
 	urb->context = skb;
 	skb_queue_tail(&priv->rx_queue, skb);
 	err = usb_submit_urb(urb, GFP_ATOMIC);
-	if (err && err != EPERM)
+	if (err && err != -EPERM)
 		netdev_err(dev,
 			   "can not submit rxurb, err is %x, URB status is %x\n",
 			   err, urb->status);
-- 
2.27.0

[PATCH AUTOSEL 4.4 06/38] staging: rtl8192u: fix wrong judgement in rtl8192_rx_isr

[Sasha Levin]

From: Zhang Qilong <zhangqilong3@huawei.com>

[ Upstream commit 071dc1787a2f8bb636f864c1f306280deea3b1d5 ]

The 'EPERM' cannot appear in the previous path, we
should use '-EPERM' to check it. For example:

Call trace:
->rtl8192_rx_isr
    ->usb_submit_urb
       ->usb_hcd_submit_urb
           ->rh_urb_enqueue
	       ->rh_queue_status
	           ->usb_hcd_link_urb_to_ep

Signed-off-by: Zhang Qilong <zhangqilong3@huawei.com>
Link: https://lore.kernel.org/r/20201028122648.47959-1-zhangqilong3@huawei.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/staging/rtl8192u/r8192U_core.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/staging/rtl8192u/r8192U_core.c b/drivers/staging/rtl8192u/r8192U_core.c
index 1e0d2a33787e1..89ce39872ffec 100644
--- a/drivers/staging/rtl8192u/r8192U_core.c
+++ b/drivers/staging/rtl8192u/r8192U_core.c
@@ -1003,7 +1003,7 @@ static void rtl8192_rx_isr(struct urb *urb)
 	urb->context = skb;
 	skb_queue_tail(&priv->rx_queue, skb);
 	err = usb_submit_urb(urb, GFP_ATOMIC);
-	if (err && err != EPERM)
+	if (err && err != -EPERM)
 		netdev_err(dev,
 			   "can not submit rxurb, err is %x, URB status is %x\n",
 			   err, urb->status);
-- 
2.27.0

_______________________________________________
devel mailing list
devel@linuxdriverproject.org
http://driverdev.linuxdriverproject.org/mailman/listinfo/driverdev-devel

[PATCH AUTOSEL 4.4 07/38] mips: ar7: add missing iounmap() on error in ar7_gpio_init

[Sasha Levin]

From: Qinglang Miao <miaoqinglang@huawei.com>

[ Upstream commit 5a5aa912f687204d50455d0db36f94dd8de601c2 ]

Add the missing iounmap() of gpch->regs before return from
ar7_gpio_init() in the error handling case.

Signed-off-by: Qinglang Miao <miaoqinglang@huawei.com>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/mips/ar7/gpio.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/arch/mips/ar7/gpio.c b/arch/mips/ar7/gpio.c
index f4930456eb8e8..f7b9c8002d1ca 100644
--- a/arch/mips/ar7/gpio.c
+++ b/arch/mips/ar7/gpio.c
@@ -339,6 +339,7 @@ int __init ar7_gpio_init(void)
 	if (ret) {
 		printk(KERN_ERR "%s: failed to add gpiochip\n",
 					gpch->chip.label);
+		iounmap(gpch->regs);
 		return ret;
 	}
 	printk(KERN_INFO "%s: registered %d GPIOs\n",
-- 
2.27.0

[PATCH AUTOSEL 4.4 08/38] locktorture: Prevent hangs for invalid arguments

[Sasha Levin]

From: "Paul E. McKenney" <paulmck@kernel.org>

[ Upstream commit 6b74fa0a776e3715d385b23d29db469179c825b0 ]

If an locktorture torture-test run is given a bad kvm.sh argument, the
test will complain to the console, which is good.  What is bad is that
from the user's perspective, it will just hang for the time specified
by the --duration argument.  This commit therefore forces an immediate
kernel shutdown if a lock_torture_init()-time error occurs, thus avoiding
the appearance of a hang.  It also forces a console splat in this case
to clearly indicate the presence of an error.

Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 kernel/locking/locktorture.c | 5 +++++
 1 file changed, 5 insertions(+)

diff --git a/kernel/locking/locktorture.c b/kernel/locking/locktorture.c
index ad5aea269f76f..081145d6bd697 100644
--- a/kernel/locking/locktorture.c
+++ b/kernel/locking/locktorture.c
@@ -38,6 +38,7 @@
 #include <linux/slab.h>
 #include <linux/percpu-rwsem.h>
 #include <linux/torture.h>
+#include <linux/reboot.h>
 
 MODULE_LICENSE("GPL");
 MODULE_AUTHOR("Paul E. McKenney <paulmck@us.ibm.com>");
@@ -966,6 +967,10 @@ static int __init lock_torture_init(void)
 unwind:
 	torture_init_end();
 	lock_torture_cleanup();
+	if (shutdown_secs) {
+		WARN_ON(!IS_MODULE(CONFIG_LOCK_TORTURE_TEST));
+		kernel_power_off();
+	}
 	return firsterr;
 }
 
-- 
2.27.0

[PATCH AUTOSEL 4.4 09/38] rcutorture: Prevent hangs for invalid arguments

[Sasha Levin]

From: "Paul E. McKenney" <paulmck@kernel.org>

[ Upstream commit 4994684ce10924a0302567c315c91b0a64eeef46 ]

If an rcutorture torture-test run is given a bad kvm.sh argument, the
test will complain to the console, which is good.  What is bad is that
from the user's perspective, it will just hang for the time specified
by the --duration argument.  This commit therefore forces an immediate
kernel shutdown if a rcu_torture_init()-time error occurs, thus avoiding
the appearance of a hang.  It also forces a console splat in this case
to clearly indicate the presence of an error.

Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 kernel/rcu/rcutorture.c | 4 ++++
 1 file changed, 4 insertions(+)

diff --git a/kernel/rcu/rcutorture.c b/kernel/rcu/rcutorture.c
index 041a02b334d73..d808212822d71 100644
--- a/kernel/rcu/rcutorture.c
+++ b/kernel/rcu/rcutorture.c
@@ -1914,6 +1914,10 @@ rcu_torture_init(void)
 unwind:
 	torture_init_end();
 	rcu_torture_cleanup();
+	if (shutdown_secs) {
+		WARN_ON(!IS_MODULE(CONFIG_RCU_TORTURE_TEST));
+		kernel_power_off();
+	}
 	return firsterr;
 }
 
-- 
2.27.0

[PATCH AUTOSEL 4.4 10/38] drm: panel: simple: add missing platform_driver_unregister() in panel_simple_init

[Sasha Levin]

From: Qinglang Miao <miaoqinglang@huawei.com>

[ Upstream commit f2e66f212a9de04afc2caa5ec79057c0ac75c728 ]

Add the missing platform_driver_unregister() before return
from panel_simple_init in the error handling case when failed
to register panel_simple_dsi_driver with CONFIG_DRM_MIPI_DSI
enabled.

Signed-off-by: Qinglang Miao <miaoqinglang@huawei.com>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20201031011856.137307-1-miaoqinglang@huawei.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/gpu/drm/panel/panel-simple.c | 4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)

diff --git a/drivers/gpu/drm/panel/panel-simple.c b/drivers/gpu/drm/panel/panel-simple.c
index 64b23bdebd1d1..7740772e4d575 100644
--- a/drivers/gpu/drm/panel/panel-simple.c
+++ b/drivers/gpu/drm/panel/panel-simple.c
@@ -1435,8 +1435,10 @@ static int __init panel_simple_init(void)
 
 	if (IS_ENABLED(CONFIG_DRM_MIPI_DSI)) {
 		err = mipi_dsi_driver_register(&panel_simple_dsi_driver);
-		if (err < 0)
+		if (err < 0) {
+			platform_driver_unregister(&panel_simple_platform_driver);
 			return err;
+		}
 	}
 
 	return 0;
-- 
2.27.0

[PATCH AUTOSEL 4.4 10/38] drm: panel: simple: add missing platform_driver_unregister() in panel_simple_init

[Sasha Levin]

From: Qinglang Miao <miaoqinglang@huawei.com>

[ Upstream commit f2e66f212a9de04afc2caa5ec79057c0ac75c728 ]

Add the missing platform_driver_unregister() before return
from panel_simple_init in the error handling case when failed
to register panel_simple_dsi_driver with CONFIG_DRM_MIPI_DSI
enabled.

Signed-off-by: Qinglang Miao <miaoqinglang@huawei.com>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20201031011856.137307-1-miaoqinglang@huawei.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/gpu/drm/panel/panel-simple.c | 4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)

diff --git a/drivers/gpu/drm/panel/panel-simple.c b/drivers/gpu/drm/panel/panel-simple.c
index 64b23bdebd1d1..7740772e4d575 100644
--- a/drivers/gpu/drm/panel/panel-simple.c
+++ b/drivers/gpu/drm/panel/panel-simple.c
@@ -1435,8 +1435,10 @@ static int __init panel_simple_init(void)
 
 	if (IS_ENABLED(CONFIG_DRM_MIPI_DSI)) {
 		err = mipi_dsi_driver_register(&panel_simple_dsi_driver);
-		if (err < 0)
+		if (err < 0) {
+			platform_driver_unregister(&panel_simple_platform_driver);
 			return err;
+		}
 	}
 
 	return 0;
-- 
2.27.0

_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel

[PATCH AUTOSEL 4.4 11/38] Bluetooth: hidp: use correct wait queue when removing ctrl_wait

[Sasha Levin]

From: Ole Bjørn Midtbø <omidtbo@cisco.com>

[ Upstream commit cca342d98bef68151a80b024f7bf5f388d1fbdea ]

A different wait queue was used when removing ctrl_wait than when adding
it. This effectively made the remove operation without locking compared
to other operations on the wait queue ctrl_wait was part of. This caused
issues like below where dead000000000100 is LIST_POISON1 and
dead000000000200 is LIST_POISON2.

 list_add corruption. next->prev should be prev (ffffffc1b0a33a08), \
	but was dead000000000200. (next=ffffffc03ac77de0).
 ------------[ cut here ]------------
 CPU: 3 PID: 2138 Comm: bluetoothd Tainted: G           O    4.4.238+ #9
 ...
 ---[ end trace 0adc2158f0646eac ]---
 Call trace:
 [<ffffffc000443f78>] __list_add+0x38/0xb0
 [<ffffffc0000f0d04>] add_wait_queue+0x4c/0x68
 [<ffffffc00020eecc>] __pollwait+0xec/0x100
 [<ffffffc000d1556c>] bt_sock_poll+0x74/0x200
 [<ffffffc000bdb8a8>] sock_poll+0x110/0x128
 [<ffffffc000210378>] do_sys_poll+0x220/0x480
 [<ffffffc0002106f0>] SyS_poll+0x80/0x138
 [<ffffffc00008510c>] __sys_trace_return+0x0/0x4

 Unable to handle kernel paging request at virtual address dead000000000100
 ...
 CPU: 4 PID: 5387 Comm: kworker/u15:3 Tainted: G        W  O    4.4.238+ #9
 ...
 Call trace:
  [<ffffffc0000f079c>] __wake_up_common+0x7c/0xa8
  [<ffffffc0000f0818>] __wake_up+0x50/0x70
  [<ffffffc000be11b0>] sock_def_wakeup+0x58/0x60
  [<ffffffc000de5e10>] l2cap_sock_teardown_cb+0x200/0x224
  [<ffffffc000d3f2ac>] l2cap_chan_del+0xa4/0x298
  [<ffffffc000d45ea0>] l2cap_conn_del+0x118/0x198
  [<ffffffc000d45f8c>] l2cap_disconn_cfm+0x6c/0x78
  [<ffffffc000d29934>] hci_event_packet+0x564/0x2e30
  [<ffffffc000d19b0c>] hci_rx_work+0x10c/0x360
  [<ffffffc0000c2218>] process_one_work+0x268/0x460
  [<ffffffc0000c2678>] worker_thread+0x268/0x480
  [<ffffffc0000c94e0>] kthread+0x118/0x128
  [<ffffffc000085070>] ret_from_fork+0x10/0x20
  ---[ end trace 0adc2158f0646ead ]---

Signed-off-by: Ole Bjørn Midtbø <omidtbo@cisco.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 net/bluetooth/hidp/core.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/net/bluetooth/hidp/core.c b/net/bluetooth/hidp/core.c
index 552e00b07196e..9ec37c6c8c4aa 100644
--- a/net/bluetooth/hidp/core.c
+++ b/net/bluetooth/hidp/core.c
@@ -1282,7 +1282,7 @@ static int hidp_session_thread(void *arg)
 
 	/* cleanup runtime environment */
 	remove_wait_queue(sk_sleep(session->intr_sock->sk), &intr_wait);
-	remove_wait_queue(sk_sleep(session->intr_sock->sk), &ctrl_wait);
+	remove_wait_queue(sk_sleep(session->ctrl_sock->sk), &ctrl_wait);
 	wake_up_interruptible(&session->report_queue);
 	hidp_del_timer(session);
 
-- 
2.27.0

[PATCH AUTOSEL 4.4 12/38] net: skb_vlan_untag(): don't reset transport offset if set by GRO layer

[Sasha Levin]

From: Alexander Lobakin <alobakin@pm.me>

[ Upstream commit 8be33ecfc1ffd2da20cc29e957e4cb6eb99310cb ]

Similar to commit fda55eca5a33f
("net: introduce skb_transport_header_was_set()"), avoid resetting
transport offsets that were already set by GRO layer. This not only
mirrors the behavior of __netif_receive_skb_core(), but also makes
sense when it comes to UDP GSO fraglists forwarding: transport offset
of such skbs is set only once by GRO receive callback and remains
untouched and correct up to the xmitting driver in 1:1 case, but
becomes junk after untagging in ingress VLAN case and breaks UDP
GSO offload. This does not happen after this change, and all types
of forwarding of UDP GSO fraglists work as expected.

Since v1 [1]:
 - keep the code 1:1 with __netif_receive_skb_core() (Jakub).

[1] https://lore.kernel.org/netdev/zYurwsZRN7BkqSoikWQLVqHyxz18h4LhHU4NFa2Vw@cp4-web-038.plabs.ch

Signed-off-by: Alexander Lobakin <alobakin@pm.me>
Link: https://lore.kernel.org/r/7JgIkgEztzt0W6ZtC9V9Cnk5qfkrUFYcpN871syCi8@cp4-web-040.plabs.ch
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 net/core/skbuff.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/net/core/skbuff.c b/net/core/skbuff.c
index e87ec3659ef61..c3993afc32e2c 100644
--- a/net/core/skbuff.c
+++ b/net/core/skbuff.c
@@ -4386,7 +4386,8 @@ struct sk_buff *skb_vlan_untag(struct sk_buff *skb)
 		goto err_free;
 
 	skb_reset_network_header(skb);
-	skb_reset_transport_header(skb);
+	if (!skb_transport_header_was_set(skb))
+		skb_reset_transport_header(skb);
 	skb_reset_mac_len(skb);
 
 	return skb;
-- 
2.27.0

[PATCH AUTOSEL 4.4 13/38] MIPS: BMC47xx: fix kconfig dependency bug for BCM47XX_SSB

[Sasha Levin]

From: Necip Fazil Yildiran <fazilyildiran@gmail.com>

[ Upstream commit 09a48cbcd7af9203296938044f1100bb113ce01a ]

When BCM47XX_SSB is enabled and SSB_PCIHOST is disabled, it results in the
following Kbuild warning:

WARNING: unmet direct dependencies detected for SSB_B43_PCI_BRIDGE
  Depends on [n]: SSB [=y] && SSB_PCIHOST [=n]
  Selected by [y]:
  - BCM47XX_SSB [=y] && BCM47XX [=y] && PCI [=y]

The reason is that BCM47XX_SSB selects SSB_B43_PCI_BRIDGE without
depending on or selecting SSB_PCIHOST while SSB_B43_PCI_BRIDGE depends on
SSB_PCIHOST. This can also fail building the kernel as demonstrated in a
bug report.

Honor the kconfig dependency to remove unmet direct dependency warnings
and avoid any potential build failures.

Link: https://bugzilla.kernel.org/show_bug.cgi?id=210051
Signed-off-by: Necip Fazil Yildiran <fazilyildiran@gmail.com>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/mips/bcm47xx/Kconfig | 1 +
 1 file changed, 1 insertion(+)

diff --git a/arch/mips/bcm47xx/Kconfig b/arch/mips/bcm47xx/Kconfig
index e970fd9cf7693..83b80ffe803a0 100644
--- a/arch/mips/bcm47xx/Kconfig
+++ b/arch/mips/bcm47xx/Kconfig
@@ -8,6 +8,7 @@ config BCM47XX_SSB
 	select SSB_DRIVER_MIPS
 	select SSB_DRIVER_EXTIF
 	select SSB_EMBEDDED
+	select SSB_PCIHOST if PCI
 	select SSB_B43_PCI_BRIDGE if PCI
 	select SSB_DRIVER_PCICORE if PCI
 	select SSB_PCICORE_HOSTMODE if PCI
-- 
2.27.0

[PATCH AUTOSEL 4.4 14/38] jfs: Fix memleak in dbAdjCtl

[Sasha Levin]

From: Dinghao Liu <dinghao.liu@zju.edu.cn>

[ Upstream commit 751341b4d7841e2b76e78eec382c2e119165497f ]

When dbBackSplit() fails, mp should be released to
prevent memleak. It's the same when dbJoin() fails.

Signed-off-by: Dinghao Liu <dinghao.liu@zju.edu.cn>
Signed-off-by: Dave Kleikamp <dave.kleikamp@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 fs/jfs/jfs_dmap.c | 8 ++++++--
 1 file changed, 6 insertions(+), 2 deletions(-)

diff --git a/fs/jfs/jfs_dmap.c b/fs/jfs/jfs_dmap.c
index 2d514c7affc2a..fa14a01950853 100644
--- a/fs/jfs/jfs_dmap.c
+++ b/fs/jfs/jfs_dmap.c
@@ -2562,15 +2562,19 @@ dbAdjCtl(struct bmap * bmp, s64 blkno, int newval, int alloc, int level)
 		 */
 		if (oldval == NOFREE) {
 			rc = dbBackSplit((dmtree_t *) dcp, leafno);
-			if (rc)
+			if (rc) {
+				release_metapage(mp);
 				return rc;
+			}
 			oldval = dcp->stree[ti];
 		}
 		dbSplit((dmtree_t *) dcp, leafno, dcp->budmin, newval);
 	} else {
 		rc = dbJoin((dmtree_t *) dcp, leafno, newval);
-		if (rc)
+		if (rc) {
+			release_metapage(mp);
 			return rc;
+		}
 	}
 
 	/* check if the root of the current dmap control page changed due
-- 
2.27.0

[PATCH AUTOSEL 4.4 15/38] media: zr364xx: propagate errors from zr364xx_start_readpipe()

[Sasha Levin]

From: Evgeny Novikov <novikov@ispras.ru>

[ Upstream commit af0321a5be3e5647441eb6b79355beaa592df97a ]

zr364xx_start_readpipe() can fail but callers do not care about that.
This can result in various negative consequences. The patch adds missed
error handling.

Found by Linux Driver Verification project (linuxtesting.org).

Signed-off-by: Evgeny Novikov <novikov@ispras.ru>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/media/usb/zr364xx/zr364xx.c | 31 ++++++++++++++++++++++-------
 1 file changed, 24 insertions(+), 7 deletions(-)

diff --git a/drivers/media/usb/zr364xx/zr364xx.c b/drivers/media/usb/zr364xx/zr364xx.c
index 2d56cccaa4747..505e08ddde2bb 100644
--- a/drivers/media/usb/zr364xx/zr364xx.c
+++ b/drivers/media/usb/zr364xx/zr364xx.c
@@ -1359,6 +1359,7 @@ static int zr364xx_board_init(struct zr364xx_camera *cam)
 {
 	struct zr364xx_pipeinfo *pipe = cam->pipe;
 	unsigned long i;
+	int err;
 
 	DBG("board init: %p\n", cam);
 	memset(pipe, 0, sizeof(*pipe));
@@ -1392,9 +1393,8 @@ static int zr364xx_board_init(struct zr364xx_camera *cam)
 
 	if (i == 0) {
 		printk(KERN_INFO KBUILD_MODNAME ": out of memory. Aborting\n");
-		kfree(cam->pipe->transfer_buffer);
-		cam->pipe->transfer_buffer = NULL;
-		return -ENOMEM;
+		err = -ENOMEM;
+		goto err_free;
 	} else
 		cam->buffer.dwFrames = i;
 
@@ -1409,9 +1409,17 @@ static int zr364xx_board_init(struct zr364xx_camera *cam)
 	/*** end create system buffers ***/
 
 	/* start read pipe */
-	zr364xx_start_readpipe(cam);
+	err = zr364xx_start_readpipe(cam);
+	if (err)
+		goto err_free;
+
 	DBG(": board initialized\n");
 	return 0;
+
+err_free:
+	kfree(cam->pipe->transfer_buffer);
+	cam->pipe->transfer_buffer = NULL;
+	return err;
 }
 
 static int zr364xx_probe(struct usb_interface *intf,
@@ -1610,10 +1618,19 @@ static int zr364xx_resume(struct usb_interface *intf)
 	if (!cam->was_streaming)
 		return 0;
 
-	zr364xx_start_readpipe(cam);
+	res = zr364xx_start_readpipe(cam);
+	if (res)
+		return res;
+
 	res = zr364xx_prepare(cam);
-	if (!res)
-		zr364xx_start_acquire(cam);
+	if (res)
+		goto err_prepare;
+
+	zr364xx_start_acquire(cam);
+	return 0;
+
+err_prepare:
+	zr364xx_stop_readpipe(cam);
 	return res;
 }
 #endif
-- 
2.27.0

[PATCH AUTOSEL 4.4 16/38] media: isif: reset global state

[Sasha Levin]

From: Evgeny Novikov <novikov@ispras.ru>

[ Upstream commit 6651dba2bd838f34cf5a1e84229aaa579b1a94fe ]

isif_probe() invokes iounmap() on error handling paths, but it does not
reset the global state. So, later it can invoke iounmap() even when
ioremap() fails. This is the case also for isif_remove(). The patch
resets the global state after invoking iounmap() to avoid this.

Found by Linux Driver Verification project (linuxtesting.org).

Signed-off-by: Evgeny Novikov <novikov@ispras.ru>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/media/platform/davinci/isif.c | 11 +++++++++--
 1 file changed, 9 insertions(+), 2 deletions(-)

diff --git a/drivers/media/platform/davinci/isif.c b/drivers/media/platform/davinci/isif.c
index b51b875c5a612..3507aa867ba12 100644
--- a/drivers/media/platform/davinci/isif.c
+++ b/drivers/media/platform/davinci/isif.c
@@ -1090,10 +1090,14 @@ static int isif_probe(struct platform_device *pdev)
 	release_mem_region(res->start, resource_size(res));
 	i--;
 fail_nobase_res:
-	if (isif_cfg.base_addr)
+	if (isif_cfg.base_addr) {
 		iounmap(isif_cfg.base_addr);
-	if (isif_cfg.linear_tbl0_addr)
+		isif_cfg.base_addr = NULL;
+	}
+	if (isif_cfg.linear_tbl0_addr) {
 		iounmap(isif_cfg.linear_tbl0_addr);
+		isif_cfg.linear_tbl0_addr = NULL;
+	}
 
 	while (i >= 0) {
 		res = platform_get_resource(pdev, IORESOURCE_MEM, i);
@@ -1111,8 +1115,11 @@ static int isif_remove(struct platform_device *pdev)
 	int i = 0;
 
 	iounmap(isif_cfg.base_addr);
+	isif_cfg.base_addr = NULL;
 	iounmap(isif_cfg.linear_tbl0_addr);
+	isif_cfg.linear_tbl0_addr = NULL;
 	iounmap(isif_cfg.linear_tbl1_addr);
+	isif_cfg.linear_tbl1_addr = NULL;
 	while (i < 3) {
 		res = platform_get_resource(pdev, IORESOURCE_MEM, i);
 		if (res)
-- 
2.27.0

[PATCH AUTOSEL 4.4 17/38] mmc: tmio: do not print real IOMEM pointer

[Sasha Levin]

From: Krzysztof Kozlowski <krzk@kernel.org>

[ Upstream commit ade8e9d3fb9232ddfb87a4bc641b35b988d9757b ]

Printing kernel pointers is discouraged because they might leak kernel
memory layout.  This fixes smatch warning:

    drivers/mmc/host/tmio_mmc.c:177 tmio_mmc_probe() warn: argument 3 to %08lx specifier is cast from pointer

Reported-by: kernel test robot <lkp@intel.com>
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Link: https://lore.kernel.org/r/20201116164252.44078-1-krzk@kernel.org
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/mmc/host/tmio_mmc.c | 3 +--
 1 file changed, 1 insertion(+), 2 deletions(-)

diff --git a/drivers/mmc/host/tmio_mmc.c b/drivers/mmc/host/tmio_mmc.c
index e897e7fc3b14c..052093db7d159 100644
--- a/drivers/mmc/host/tmio_mmc.c
+++ b/drivers/mmc/host/tmio_mmc.c
@@ -109,8 +109,7 @@ static int tmio_mmc_probe(struct platform_device *pdev)
 	if (ret)
 		goto host_remove;
 
-	pr_info("%s at 0x%08lx irq %d\n", mmc_hostname(host->mmc),
-		(unsigned long)host->ctl, irq);
+	pr_info("%s at 0x%p irq %d\n", mmc_hostname(host->mmc), host->ctl, irq);
 
 	return 0;
 
-- 
2.27.0

[PATCH AUTOSEL 4.4 18/38] ARM: OMAP2+: Fix memleak in omap2xxx_clkt_vps_init

[Sasha Levin]

From: Youling Tang <tangyouling@loongson.cn>

[ Upstream commit 3c5902d270edb6ccc3049acfe5d3e96653c87dcd ]

If the clk_register fails, we should free hw before function returns to
prevent memleak.

Signed-off-by: Youling Tang <tangyouling@loongson.cn>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm/mach-omap2/clkt2xxx_virt_prcm_set.c | 6 ++++++
 1 file changed, 6 insertions(+)

diff --git a/arch/arm/mach-omap2/clkt2xxx_virt_prcm_set.c b/arch/arm/mach-omap2/clkt2xxx_virt_prcm_set.c
index b64d717bfab6c..45fa2a87d5715 100644
--- a/arch/arm/mach-omap2/clkt2xxx_virt_prcm_set.c
+++ b/arch/arm/mach-omap2/clkt2xxx_virt_prcm_set.c
@@ -247,6 +247,12 @@ void omap2xxx_clkt_vps_init(void)
 	hw->hw.init = &init;
 
 	clk = clk_register(NULL, &hw->hw);
+	if (IS_ERR(clk)) {
+		printk(KERN_ERR "Failed to register clock\n");
+		kfree(hw);
+		return;
+	}
+
 	clkdev_create(clk, "cpufreq_ck", NULL);
 	return;
 cleanup:
-- 
2.27.0

[PATCH AUTOSEL 4.4 18/38] ARM: OMAP2+: Fix memleak in omap2xxx_clkt_vps_init

[Sasha Levin]

From: Youling Tang <tangyouling@loongson.cn>

[ Upstream commit 3c5902d270edb6ccc3049acfe5d3e96653c87dcd ]

If the clk_register fails, we should free hw before function returns to
prevent memleak.

Signed-off-by: Youling Tang <tangyouling@loongson.cn>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm/mach-omap2/clkt2xxx_virt_prcm_set.c | 6 ++++++
 1 file changed, 6 insertions(+)

diff --git a/arch/arm/mach-omap2/clkt2xxx_virt_prcm_set.c b/arch/arm/mach-omap2/clkt2xxx_virt_prcm_set.c
index b64d717bfab6c..45fa2a87d5715 100644
--- a/arch/arm/mach-omap2/clkt2xxx_virt_prcm_set.c
+++ b/arch/arm/mach-omap2/clkt2xxx_virt_prcm_set.c
@@ -247,6 +247,12 @@ void omap2xxx_clkt_vps_init(void)
 	hw->hw.init = &init;
 
 	clk = clk_register(NULL, &hw->hw);
+	if (IS_ERR(clk)) {
+		printk(KERN_ERR "Failed to register clock\n");
+		kfree(hw);
+		return;
+	}
+
 	clkdev_create(clk, "cpufreq_ck", NULL);
 	return;
 cleanup:
-- 
2.27.0


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

[PATCH AUTOSEL 4.4 19/38] tick/broadcast: Serialize access to tick_next_period

[Sasha Levin]

From: Thomas Gleixner <tglx@linutronix.de>

[ Upstream commit f73f64d5687192bc8eb7f3d9521ca6256b79f224 ]

tick_broadcast_setup_oneshot() accesses tick_next_period twice without any
serialization. This is wrong in two aspects:

  - Reading it twice might make the broadcast data inconsistent if the
    variable is updated concurrently.

  - On 32bit systems the access might see an partial update

Protect it with jiffies_lock. That's safe as none of the callchains leading
up to this function can create a lock ordering violation:

timer interrupt
  run_local_timers()
    hrtimer_run_queues()
      hrtimer_switch_to_hres()
        tick_init_highres()
	  tick_switch_to_oneshot()
	    tick_broadcast_switch_to_oneshot()
or
     tick_check_oneshot_change()
       tick_nohz_switch_to_nohz()
         tick_switch_to_oneshot()
           tick_broadcast_switch_to_oneshot()

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/20201117132006.061341507@linutronix.de
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 kernel/time/tick-broadcast.c | 23 ++++++++++++++++++++---
 1 file changed, 20 insertions(+), 3 deletions(-)

diff --git a/kernel/time/tick-broadcast.c b/kernel/time/tick-broadcast.c
index 22d7454b387bc..edb937bfc63c6 100644
--- a/kernel/time/tick-broadcast.c
+++ b/kernel/time/tick-broadcast.c
@@ -872,6 +872,22 @@ static void tick_broadcast_init_next_event(struct cpumask *mask,
 	}
 }
 
+static inline ktime_t tick_get_next_period(void)
+{
+	ktime_t next;
+
+	/*
+	 * Protect against concurrent updates (store /load tearing on
+	 * 32bit). It does not matter if the time is already in the
+	 * past. The broadcast device which is about to be programmed will
+	 * fire in any case.
+	 */
+	raw_spin_lock(&jiffies_lock);
+	next = tick_next_period;
+	raw_spin_unlock(&jiffies_lock);
+	return next;
+}
+
 /**
  * tick_broadcast_setup_oneshot - setup the broadcast device
  */
@@ -900,10 +916,11 @@ void tick_broadcast_setup_oneshot(struct clock_event_device *bc)
 			   tick_broadcast_oneshot_mask, tmpmask);
 
 		if (was_periodic && !cpumask_empty(tmpmask)) {
+			ktime_t nextevt = tick_get_next_period();
+
 			clockevents_switch_state(bc, CLOCK_EVT_STATE_ONESHOT);
-			tick_broadcast_init_next_event(tmpmask,
-						       tick_next_period);
-			tick_broadcast_set_event(bc, cpu, tick_next_period);
+			tick_broadcast_init_next_event(tmpmask, nextevt);
+			tick_broadcast_set_event(bc, cpu, nextevt);
 		} else
 			bc->next_event.tv64 = KTIME_MAX;
 	} else {
-- 
2.27.0

[PATCH AUTOSEL 4.4 20/38] ALSA: usb-audio: Don't call usb_set_interface() at trigger callback

[Sasha Levin]

From: Takashi Iwai <tiwai@suse.de>

[ Upstream commit 4974b7950929e4a28d4eaee48e4ad07f168ac132 ]

The PCM trigger callback is atomic, hence we must not call a function
like usb_set_interface() there.  Calling it from there would lead to a
kernel Oops.

Fix it by moving the usb_set_interface() call to set_sync_endpoint().

Also, apply the snd_usb_set_interface_quirk() for consistency, too.

Tested-by: Keith Milner <kamilner@superlative.org>
Tested-by: Dylan Robinson <dylan_robinson@motu.com>
Link: https://lore.kernel.org/r/20201123085347.19667-3-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 sound/usb/pcm.c | 28 +++++++++++++---------------
 1 file changed, 13 insertions(+), 15 deletions(-)

diff --git a/sound/usb/pcm.c b/sound/usb/pcm.c
index 366813f1a5f80..59f3a9492d74b 100644
--- a/sound/usb/pcm.c
+++ b/sound/usb/pcm.c
@@ -242,21 +242,6 @@ static int start_endpoints(struct snd_usb_substream *subs)
 	    !test_and_set_bit(SUBSTREAM_FLAG_SYNC_EP_STARTED, &subs->flags)) {
 		struct snd_usb_endpoint *ep = subs->sync_endpoint;
 
-		if (subs->data_endpoint->iface != subs->sync_endpoint->iface ||
-		    subs->data_endpoint->altsetting != subs->sync_endpoint->altsetting) {
-			err = usb_set_interface(subs->dev,
-						subs->sync_endpoint->iface,
-						subs->sync_endpoint->altsetting);
-			if (err < 0) {
-				clear_bit(SUBSTREAM_FLAG_SYNC_EP_STARTED, &subs->flags);
-				dev_err(&subs->dev->dev,
-					   "%d:%d: cannot set interface (%d)\n",
-					   subs->sync_endpoint->iface,
-					   subs->sync_endpoint->altsetting, err);
-				return -EIO;
-			}
-		}
-
 		dev_dbg(&subs->dev->dev, "Starting sync EP @%p\n", ep);
 
 		ep->sync_slave = subs->data_endpoint;
@@ -489,6 +474,19 @@ static int set_sync_endpoint(struct snd_usb_substream *subs,
 
 	subs->data_endpoint->sync_master = subs->sync_endpoint;
 
+	if (subs->data_endpoint->iface != subs->sync_endpoint->iface ||
+	    subs->data_endpoint->altsetting != subs->sync_endpoint->altsetting) {
+		err = usb_set_interface(subs->dev,
+					subs->sync_endpoint->iface,
+					subs->sync_endpoint->altsetting);
+		if (err < 0)
+			return err;
+		dev_dbg(&dev->dev, "setting usb interface %d:%d\n",
+			subs->sync_endpoint->iface,
+			subs->sync_endpoint->altsetting);
+		snd_usb_set_interface_quirk(dev);
+	}
+
 	return 0;
 }
 
-- 
2.27.0

[PATCH AUTOSEL 4.4 20/38] ALSA: usb-audio: Don't call usb_set_interface() at trigger callback

[Sasha Levin]

From: Takashi Iwai <tiwai@suse.de>

[ Upstream commit 4974b7950929e4a28d4eaee48e4ad07f168ac132 ]

The PCM trigger callback is atomic, hence we must not call a function
like usb_set_interface() there.  Calling it from there would lead to a
kernel Oops.

Fix it by moving the usb_set_interface() call to set_sync_endpoint().

Also, apply the snd_usb_set_interface_quirk() for consistency, too.

Tested-by: Keith Milner <kamilner@superlative.org>
Tested-by: Dylan Robinson <dylan_robinson@motu.com>
Link: https://lore.kernel.org/r/20201123085347.19667-3-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 sound/usb/pcm.c | 28 +++++++++++++---------------
 1 file changed, 13 insertions(+), 15 deletions(-)

diff --git a/sound/usb/pcm.c b/sound/usb/pcm.c
index 366813f1a5f80..59f3a9492d74b 100644
--- a/sound/usb/pcm.c
+++ b/sound/usb/pcm.c
@@ -242,21 +242,6 @@ static int start_endpoints(struct snd_usb_substream *subs)
 	    !test_and_set_bit(SUBSTREAM_FLAG_SYNC_EP_STARTED, &subs->flags)) {
 		struct snd_usb_endpoint *ep = subs->sync_endpoint;
 
-		if (subs->data_endpoint->iface != subs->sync_endpoint->iface ||
-		    subs->data_endpoint->altsetting != subs->sync_endpoint->altsetting) {
-			err = usb_set_interface(subs->dev,
-						subs->sync_endpoint->iface,
-						subs->sync_endpoint->altsetting);
-			if (err < 0) {
-				clear_bit(SUBSTREAM_FLAG_SYNC_EP_STARTED, &subs->flags);
-				dev_err(&subs->dev->dev,
-					   "%d:%d: cannot set interface (%d)\n",
-					   subs->sync_endpoint->iface,
-					   subs->sync_endpoint->altsetting, err);
-				return -EIO;
-			}
-		}
-
 		dev_dbg(&subs->dev->dev, "Starting sync EP @%p\n", ep);
 
 		ep->sync_slave = subs->data_endpoint;
@@ -489,6 +474,19 @@ static int set_sync_endpoint(struct snd_usb_substream *subs,
 
 	subs->data_endpoint->sync_master = subs->sync_endpoint;
 
+	if (subs->data_endpoint->iface != subs->sync_endpoint->iface ||
+	    subs->data_endpoint->altsetting != subs->sync_endpoint->altsetting) {
+		err = usb_set_interface(subs->dev,
+					subs->sync_endpoint->iface,
+					subs->sync_endpoint->altsetting);
+		if (err < 0)
+			return err;
+		dev_dbg(&dev->dev, "setting usb interface %d:%d\n",
+			subs->sync_endpoint->iface,
+			subs->sync_endpoint->altsetting);
+		snd_usb_set_interface_quirk(dev);
+	}
+
 	return 0;
 }
 
-- 
2.27.0

[PATCH AUTOSEL 4.4 21/38] rxrpc: Don't leak the service-side session key to userspace

[Sasha Levin]

From: David Howells <dhowells@redhat.com>

[ Upstream commit d2ae4e918218f543214fbd906db68a6c580efbbb ]

Don't let someone reading a service-side rxrpc-type key get access to the
session key that was exchanged with the client.  The server application
will, at some point, need to be able to read the information in the ticket,
but this probably shouldn't include the key material.

Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 include/keys/rxrpc-type.h | 1 +
 net/rxrpc/ar-key.c        | 8 ++++++--
 2 files changed, 7 insertions(+), 2 deletions(-)

diff --git a/include/keys/rxrpc-type.h b/include/keys/rxrpc-type.h
index fc48754338179..5bd32114a51ad 100644
--- a/include/keys/rxrpc-type.h
+++ b/include/keys/rxrpc-type.h
@@ -88,6 +88,7 @@ struct rxk5_key {
  */
 struct rxrpc_key_token {
 	u16	security_index;		/* RxRPC header security index */
+	bool	no_leak_key;		/* Don't copy the key to userspace */
 	struct rxrpc_key_token *next;	/* the next token in the list */
 	union {
 		struct rxkad_key *kad;
diff --git a/net/rxrpc/ar-key.c b/net/rxrpc/ar-key.c
index ea615e53eab28..ab4e21ffb4de9 100644
--- a/net/rxrpc/ar-key.c
+++ b/net/rxrpc/ar-key.c
@@ -1081,7 +1081,8 @@ static long rxrpc_read(const struct key *key,
 		case RXRPC_SECURITY_RXKAD:
 			toksize += 8 * 4;	/* viceid, kvno, key*2, begin,
 						 * end, primary, tktlen */
-			toksize += RND(token->kad->ticket_len);
+			if (!token->no_leak_key)
+				toksize += RND(token->kad->ticket_len);
 			break;
 
 		case RXRPC_SECURITY_RXK5:
@@ -1190,7 +1191,10 @@ static long rxrpc_read(const struct key *key,
 			ENCODE(token->kad->start);
 			ENCODE(token->kad->expiry);
 			ENCODE(token->kad->primary_flag);
-			ENCODE_DATA(token->kad->ticket_len, token->kad->ticket);
+			if (token->no_leak_key)
+				ENCODE(0);
+			else
+				ENCODE_DATA(token->kad->ticket_len, token->kad->ticket);
 			break;
 
 		case RXRPC_SECURITY_RXK5:
-- 
2.27.0

[PATCH AUTOSEL 4.4 22/38] ARM: dts: hisilicon: fix errors detected by snps-dw-apb-uart.yaml

[Sasha Levin]

From: Zhen Lei <thunder.leizhen@huawei.com>

[ Upstream commit 30ea026e33c6dda48849d9fe0d15c1d280a92d53 ]

1. Change node name to match '^serial(@[0-9a-f,]+)*$'
2. Change clock-names to "baudclk", "apb_pclk". Both of them use the same
   clock.

Signed-off-by: Zhen Lei <thunder.leizhen@huawei.com>
Signed-off-by: Wei Xu <xuwei5@hisilicon.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm/boot/dts/hip01.dtsi    | 24 ++++++++++++------------
 arch/arm/boot/dts/hip04-d01.dts |  2 +-
 arch/arm/boot/dts/hip04.dtsi    |  6 +++---
 3 files changed, 16 insertions(+), 16 deletions(-)

diff --git a/arch/arm/boot/dts/hip01.dtsi b/arch/arm/boot/dts/hip01.dtsi
index 33130f8461c37..96f6bd0312d09 100644
--- a/arch/arm/boot/dts/hip01.dtsi
+++ b/arch/arm/boot/dts/hip01.dtsi
@@ -46,41 +46,41 @@ amba {
 			compatible = "arm,amba-bus";
 			ranges;
 
-			uart0: uart@10001000 {
+			uart0: serial@10001000 {
 				compatible = "snps,dw-apb-uart";
 				reg = <0x10001000 0x1000>;
-				clocks = <&hisi_refclk144mhz>;
-				clock-names = "apb_pclk";
+				clocks = <&hisi_refclk144mhz>, <&hisi_refclk144mhz>;
+				clock-names = "baudclk", "apb_pclk";
 				reg-shift = <2>;
 				interrupts = <0 32 4>;
 				status = "disabled";
 			};
 
-			uart1: uart@10002000 {
+			uart1: serial@10002000 {
 				compatible = "snps,dw-apb-uart";
 				reg = <0x10002000 0x1000>;
-				clocks = <&hisi_refclk144mhz>;
-				clock-names = "apb_pclk";
+				clocks = <&hisi_refclk144mhz>, <&hisi_refclk144mhz>;
+				clock-names = "baudclk", "apb_pclk";
 				reg-shift = <2>;
 				interrupts = <0 33 4>;
 				status = "disabled";
 			};
 
-			uart2: uart@10003000 {
+			uart2: serial@10003000 {
 				compatible = "snps,dw-apb-uart";
 				reg = <0x10003000 0x1000>;
-				clocks = <&hisi_refclk144mhz>;
-				clock-names = "apb_pclk";
+				clocks = <&hisi_refclk144mhz>, <&hisi_refclk144mhz>;
+				clock-names = "baudclk", "apb_pclk";
 				reg-shift = <2>;
 				interrupts = <0 34 4>;
 				status = "disabled";
 			};
 
-			uart3: uart@10006000 {
+			uart3: serial@10006000 {
 				compatible = "snps,dw-apb-uart";
 				reg = <0x10006000 0x1000>;
-				clocks = <&hisi_refclk144mhz>;
-				clock-names = "apb_pclk";
+				clocks = <&hisi_refclk144mhz>, <&hisi_refclk144mhz>;
+				clock-names = "baudclk", "apb_pclk";
 				reg-shift = <2>;
 				interrupts = <0 4 4>;
 				status = "disabled";
diff --git a/arch/arm/boot/dts/hip04-d01.dts b/arch/arm/boot/dts/hip04-d01.dts
index 40a9e33c2654e..9b2499635dc76 100644
--- a/arch/arm/boot/dts/hip04-d01.dts
+++ b/arch/arm/boot/dts/hip04-d01.dts
@@ -25,7 +25,7 @@ memory@00000000,10000000 {
 	};
 
 	soc {
-		uart0: uart@4007000 {
+		uart0: serial@4007000 {
 			status = "ok";
 		};
 	};
diff --git a/arch/arm/boot/dts/hip04.dtsi b/arch/arm/boot/dts/hip04.dtsi
index 44044f2751151..9593a78ccf067 100644
--- a/arch/arm/boot/dts/hip04.dtsi
+++ b/arch/arm/boot/dts/hip04.dtsi
@@ -253,12 +253,12 @@ arm-pmu {
 				     <0 79 4>;
 		};
 
-		uart0: uart@4007000 {
+		uart0: serial@4007000 {
 			compatible = "snps,dw-apb-uart";
 			reg = <0x4007000 0x1000>;
 			interrupts = <0 381 4>;
-			clocks = <&clk_168m>;
-			clock-names = "uartclk";
+			clocks = <&clk_168m>, <&clk_168m>;
+			clock-names = "baudclk", "apb_pclk";
 			reg-shift = <2>;
 			status = "disabled";
 		};
-- 
2.27.0

[PATCH AUTOSEL 4.4 22/38] ARM: dts: hisilicon: fix errors detected by snps-dw-apb-uart.yaml

[Sasha Levin]

From: Zhen Lei <thunder.leizhen@huawei.com>

[ Upstream commit 30ea026e33c6dda48849d9fe0d15c1d280a92d53 ]

1. Change node name to match '^serial(@[0-9a-f,]+)*$'
2. Change clock-names to "baudclk", "apb_pclk". Both of them use the same
   clock.

Signed-off-by: Zhen Lei <thunder.leizhen@huawei.com>
Signed-off-by: Wei Xu <xuwei5@hisilicon.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm/boot/dts/hip01.dtsi    | 24 ++++++++++++------------
 arch/arm/boot/dts/hip04-d01.dts |  2 +-
 arch/arm/boot/dts/hip04.dtsi    |  6 +++---
 3 files changed, 16 insertions(+), 16 deletions(-)

diff --git a/arch/arm/boot/dts/hip01.dtsi b/arch/arm/boot/dts/hip01.dtsi
index 33130f8461c37..96f6bd0312d09 100644
--- a/arch/arm/boot/dts/hip01.dtsi
+++ b/arch/arm/boot/dts/hip01.dtsi
@@ -46,41 +46,41 @@ amba {
 			compatible = "arm,amba-bus";
 			ranges;
 
-			uart0: uart@10001000 {
+			uart0: serial@10001000 {
 				compatible = "snps,dw-apb-uart";
 				reg = <0x10001000 0x1000>;
-				clocks = <&hisi_refclk144mhz>;
-				clock-names = "apb_pclk";
+				clocks = <&hisi_refclk144mhz>, <&hisi_refclk144mhz>;
+				clock-names = "baudclk", "apb_pclk";
 				reg-shift = <2>;
 				interrupts = <0 32 4>;
 				status = "disabled";
 			};
 
-			uart1: uart@10002000 {
+			uart1: serial@10002000 {
 				compatible = "snps,dw-apb-uart";
 				reg = <0x10002000 0x1000>;
-				clocks = <&hisi_refclk144mhz>;
-				clock-names = "apb_pclk";
+				clocks = <&hisi_refclk144mhz>, <&hisi_refclk144mhz>;
+				clock-names = "baudclk", "apb_pclk";
 				reg-shift = <2>;
 				interrupts = <0 33 4>;
 				status = "disabled";
 			};
 
-			uart2: uart@10003000 {
+			uart2: serial@10003000 {
 				compatible = "snps,dw-apb-uart";
 				reg = <0x10003000 0x1000>;
-				clocks = <&hisi_refclk144mhz>;
-				clock-names = "apb_pclk";
+				clocks = <&hisi_refclk144mhz>, <&hisi_refclk144mhz>;
+				clock-names = "baudclk", "apb_pclk";
 				reg-shift = <2>;
 				interrupts = <0 34 4>;
 				status = "disabled";
 			};
 
-			uart3: uart@10006000 {
+			uart3: serial@10006000 {
 				compatible = "snps,dw-apb-uart";
 				reg = <0x10006000 0x1000>;
-				clocks = <&hisi_refclk144mhz>;
-				clock-names = "apb_pclk";
+				clocks = <&hisi_refclk144mhz>, <&hisi_refclk144mhz>;
+				clock-names = "baudclk", "apb_pclk";
 				reg-shift = <2>;
 				interrupts = <0 4 4>;
 				status = "disabled";
diff --git a/arch/arm/boot/dts/hip04-d01.dts b/arch/arm/boot/dts/hip04-d01.dts
index 40a9e33c2654e..9b2499635dc76 100644
--- a/arch/arm/boot/dts/hip04-d01.dts
+++ b/arch/arm/boot/dts/hip04-d01.dts
@@ -25,7 +25,7 @@ memory@00000000,10000000 {
 	};
 
 	soc {
-		uart0: uart@4007000 {
+		uart0: serial@4007000 {
 			status = "ok";
 		};
 	};
diff --git a/arch/arm/boot/dts/hip04.dtsi b/arch/arm/boot/dts/hip04.dtsi
index 44044f2751151..9593a78ccf067 100644
--- a/arch/arm/boot/dts/hip04.dtsi
+++ b/arch/arm/boot/dts/hip04.dtsi
@@ -253,12 +253,12 @@ arm-pmu {
 				     <0 79 4>;
 		};
 
-		uart0: uart@4007000 {
+		uart0: serial@4007000 {
 			compatible = "snps,dw-apb-uart";
 			reg = <0x4007000 0x1000>;
 			interrupts = <0 381 4>;
-			clocks = <&clk_168m>;
-			clock-names = "uartclk";
+			clocks = <&clk_168m>, <&clk_168m>;
+			clock-names = "baudclk", "apb_pclk";
 			reg-shift = <2>;
 			status = "disabled";
 		};
-- 
2.27.0


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

[PATCH AUTOSEL 4.4 23/38] ARM: dts: hisilicon: fix errors detected by usb yaml

[Sasha Levin]

From: Zhen Lei <thunder.leizhen@huawei.com>

[ Upstream commit 64f5b52554a1de47a53972a47b9b58d8d66ee5aa ]

1. Change node name to match '^usb(@.*)?'

These errors are detected by generic-ehci.yaml and generic-ohci.yaml.

Signed-off-by: Zhen Lei <thunder.leizhen@huawei.com>
Signed-off-by: Wei Xu <xuwei5@hisilicon.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm/boot/dts/hisi-x5hd2.dtsi | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/arch/arm/boot/dts/hisi-x5hd2.dtsi b/arch/arm/boot/dts/hisi-x5hd2.dtsi
index c52722b14e4a0..98a8e76492b96 100644
--- a/arch/arm/boot/dts/hisi-x5hd2.dtsi
+++ b/arch/arm/boot/dts/hisi-x5hd2.dtsi
@@ -451,14 +451,14 @@ gmac1: ethernet@1841000 {
 			status = "disabled";
 		};
 
-		usb0: ehci@1890000 {
+		usb0: usb@1890000 {
 			compatible = "generic-ehci";
 			reg = <0x1890000 0x1000>;
 			interrupts = <0 66 4>;
 			clocks = <&clock HIX5HD2_USB_CLK>;
 		};
 
-		usb1: ohci@1880000 {
+		usb1: usb@1880000 {
 			compatible = "generic-ohci";
 			reg = <0x1880000 0x1000>;
 			interrupts = <0 67 4>;
-- 
2.27.0

[PATCH AUTOSEL 4.4 23/38] ARM: dts: hisilicon: fix errors detected by usb yaml

[Sasha Levin]

From: Zhen Lei <thunder.leizhen@huawei.com>

[ Upstream commit 64f5b52554a1de47a53972a47b9b58d8d66ee5aa ]

1. Change node name to match '^usb(@.*)?'

These errors are detected by generic-ehci.yaml and generic-ohci.yaml.

Signed-off-by: Zhen Lei <thunder.leizhen@huawei.com>
Signed-off-by: Wei Xu <xuwei5@hisilicon.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm/boot/dts/hisi-x5hd2.dtsi | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/arch/arm/boot/dts/hisi-x5hd2.dtsi b/arch/arm/boot/dts/hisi-x5hd2.dtsi
index c52722b14e4a0..98a8e76492b96 100644
--- a/arch/arm/boot/dts/hisi-x5hd2.dtsi
+++ b/arch/arm/boot/dts/hisi-x5hd2.dtsi
@@ -451,14 +451,14 @@ gmac1: ethernet@1841000 {
 			status = "disabled";
 		};
 
-		usb0: ehci@1890000 {
+		usb0: usb@1890000 {
 			compatible = "generic-ehci";
 			reg = <0x1890000 0x1000>;
 			interrupts = <0 66 4>;
 			clocks = <&clock HIX5HD2_USB_CLK>;
 		};
 
-		usb1: ohci@1880000 {
+		usb1: usb@1880000 {
 			compatible = "generic-ohci";
 			reg = <0x1880000 0x1000>;
 			interrupts = <0 67 4>;
-- 
2.27.0


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

[PATCH AUTOSEL 4.4 24/38] ARM: dts: hisilicon: fix errors detected by simple-bus.yaml

[Sasha Levin]

From: Zhen Lei <thunder.leizhen@huawei.com>

[ Upstream commit 8e9e8dd7ce093344a89792deaeb6caedde636dcf ]

Change bus node name from "amba" to "amba-bus" to match
'^([a-z][a-z0-9\\-]+-bus|bus|soc|axi|ahb|apb)(@[0-9a-f]+)?$'

Signed-off-by: Zhen Lei <thunder.leizhen@huawei.com>
Signed-off-by: Wei Xu <xuwei5@hisilicon.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm/boot/dts/hi3620-hi4511.dts | 2 +-
 arch/arm/boot/dts/hi3620.dtsi       | 2 +-
 arch/arm/boot/dts/hip01.dtsi        | 2 +-
 arch/arm/boot/dts/hisi-x5hd2.dtsi   | 2 +-
 4 files changed, 4 insertions(+), 4 deletions(-)

diff --git a/arch/arm/boot/dts/hi3620-hi4511.dts b/arch/arm/boot/dts/hi3620-hi4511.dts
index a579fbf13b5f5..a672c4e4babbd 100644
--- a/arch/arm/boot/dts/hi3620-hi4511.dts
+++ b/arch/arm/boot/dts/hi3620-hi4511.dts
@@ -25,7 +25,7 @@ memory {
 		reg = <0x40000000 0x20000000>;
 	};
 
-	amba {
+	amba-bus {
 		dual_timer0: dual_timer@800000 {
 			status = "ok";
 		};
diff --git a/arch/arm/boot/dts/hi3620.dtsi b/arch/arm/boot/dts/hi3620.dtsi
index 6cbb62e5c6a9e..c4b371acf1e71 100644
--- a/arch/arm/boot/dts/hi3620.dtsi
+++ b/arch/arm/boot/dts/hi3620.dtsi
@@ -64,7 +64,7 @@ cpu@3 {
 		};
 	};
 
-	amba {
+	amba-bus {
 
 		#address-cells = <1>;
 		#size-cells = <1>;
diff --git a/arch/arm/boot/dts/hip01.dtsi b/arch/arm/boot/dts/hip01.dtsi
index 96f6bd0312d09..ebb9661cae889 100644
--- a/arch/arm/boot/dts/hip01.dtsi
+++ b/arch/arm/boot/dts/hip01.dtsi
@@ -40,7 +40,7 @@ soc {
 		interrupt-parent = <&gic>;
 		ranges = <0 0x10000000 0x20000000>;
 
-		amba {
+		amba-bus {
 			#address-cells = <1>;
 			#size-cells = <1>;
 			compatible = "arm,amba-bus";
diff --git a/arch/arm/boot/dts/hisi-x5hd2.dtsi b/arch/arm/boot/dts/hisi-x5hd2.dtsi
index 98a8e76492b96..6aafb0e9ca272 100644
--- a/arch/arm/boot/dts/hisi-x5hd2.dtsi
+++ b/arch/arm/boot/dts/hisi-x5hd2.dtsi
@@ -31,7 +31,7 @@ soc {
 		interrupt-parent = <&gic>;
 		ranges = <0 0xf8000000 0x8000000>;
 
-		amba {
+		amba-bus {
 			#address-cells = <1>;
 			#size-cells = <1>;
 			compatible = "arm,amba-bus";
-- 
2.27.0

[PATCH AUTOSEL 4.4 24/38] ARM: dts: hisilicon: fix errors detected by simple-bus.yaml

[Sasha Levin]

From: Zhen Lei <thunder.leizhen@huawei.com>

[ Upstream commit 8e9e8dd7ce093344a89792deaeb6caedde636dcf ]

Change bus node name from "amba" to "amba-bus" to match
'^([a-z][a-z0-9\\-]+-bus|bus|soc|axi|ahb|apb)(@[0-9a-f]+)?$'

Signed-off-by: Zhen Lei <thunder.leizhen@huawei.com>
Signed-off-by: Wei Xu <xuwei5@hisilicon.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm/boot/dts/hi3620-hi4511.dts | 2 +-
 arch/arm/boot/dts/hi3620.dtsi       | 2 +-
 arch/arm/boot/dts/hip01.dtsi        | 2 +-
 arch/arm/boot/dts/hisi-x5hd2.dtsi   | 2 +-
 4 files changed, 4 insertions(+), 4 deletions(-)

diff --git a/arch/arm/boot/dts/hi3620-hi4511.dts b/arch/arm/boot/dts/hi3620-hi4511.dts
index a579fbf13b5f5..a672c4e4babbd 100644
--- a/arch/arm/boot/dts/hi3620-hi4511.dts
+++ b/arch/arm/boot/dts/hi3620-hi4511.dts
@@ -25,7 +25,7 @@ memory {
 		reg = <0x40000000 0x20000000>;
 	};
 
-	amba {
+	amba-bus {
 		dual_timer0: dual_timer@800000 {
 			status = "ok";
 		};
diff --git a/arch/arm/boot/dts/hi3620.dtsi b/arch/arm/boot/dts/hi3620.dtsi
index 6cbb62e5c6a9e..c4b371acf1e71 100644
--- a/arch/arm/boot/dts/hi3620.dtsi
+++ b/arch/arm/boot/dts/hi3620.dtsi
@@ -64,7 +64,7 @@ cpu@3 {
 		};
 	};
 
-	amba {
+	amba-bus {
 
 		#address-cells = <1>;
 		#size-cells = <1>;
diff --git a/arch/arm/boot/dts/hip01.dtsi b/arch/arm/boot/dts/hip01.dtsi
index 96f6bd0312d09..ebb9661cae889 100644
--- a/arch/arm/boot/dts/hip01.dtsi
+++ b/arch/arm/boot/dts/hip01.dtsi
@@ -40,7 +40,7 @@ soc {
 		interrupt-parent = <&gic>;
 		ranges = <0 0x10000000 0x20000000>;
 
-		amba {
+		amba-bus {
 			#address-cells = <1>;
 			#size-cells = <1>;
 			compatible = "arm,amba-bus";
diff --git a/arch/arm/boot/dts/hisi-x5hd2.dtsi b/arch/arm/boot/dts/hisi-x5hd2.dtsi
index 98a8e76492b96..6aafb0e9ca272 100644
--- a/arch/arm/boot/dts/hisi-x5hd2.dtsi
+++ b/arch/arm/boot/dts/hisi-x5hd2.dtsi
@@ -31,7 +31,7 @@ soc {
 		interrupt-parent = <&gic>;
 		ranges = <0 0xf8000000 0x8000000>;
 
-		amba {
+		amba-bus {
 			#address-cells = <1>;
 			#size-cells = <1>;
 			compatible = "arm,amba-bus";
-- 
2.27.0


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

[PATCH AUTOSEL 4.4 25/38] brcmsmac: ampdu: Check BA window size before checking block ack

[Sasha Levin]

From: Dmitry Safonov <dima@arista.com>

[ Upstream commit 01c195de620bb6c3ecda0dbf295fe685d8232e10 ]

bindex can be out of BA window (64):
  tid 0 seq 2983, start_seq 2915, bindex 68, index 39
  tid 0 seq 2984, start_seq 2915, bindex 69, index 40
  tid 0 seq 2985, start_seq 2915, bindex 70, index 41
  tid 0 seq 2986, start_seq 2915, bindex 71, index 42
  tid 0 seq 2879, start_seq 2915, bindex 4060, index 63
  tid 0 seq 2854, start_seq 2915, bindex 4035, index 38
  tid 0 seq 2795, start_seq 2915, bindex 3976, index 43
  tid 0 seq 2989, start_seq 2924, bindex 65, index 45
  tid 0 seq 2992, start_seq 2924, bindex 68, index 48
  tid 0 seq 2993, start_seq 2924, bindex 69, index 49
  tid 0 seq 2994, start_seq 2924, bindex 70, index 50
  tid 0 seq 2997, start_seq 2924, bindex 73, index 53
  tid 0 seq 2795, start_seq 2941, bindex 3950, index 43
  tid 0 seq 2921, start_seq 2941, bindex 4076, index 41
  tid 0 seq 2929, start_seq 2941, bindex 4084, index 49
  tid 0 seq 3011, start_seq 2946, bindex 65, index 3
  tid 0 seq 3012, start_seq 2946, bindex 66, index 4
  tid 0 seq 3013, start_seq 2946, bindex 67, index 5

In result isset() will try to dereference something on the stack,
causing panics:
  BUG: unable to handle page fault for address: ffffa742800ed01f
  #PF: supervisor read access in kernel mode
  #PF: error_code(0x0000) - not-present page
  PGD 6a4e9067 P4D 6a4e9067 PUD 6a4ec067 PMD 6a4ed067 PTE 0
  Oops: 0000 [#1] PREEMPT SMP PTI
  CPU: 1 PID: 0 Comm: swapper/1 Kdump: loaded Not tainted 5.8.5-arch1-1-kdump #1
  Hardware name: Apple Inc. MacBookAir3,1/Mac-942452F5819B1C1B, BIOS    MBA31.88Z.0061.B07.1201241641 01/24/12
  RIP: 0010:brcms_c_ampdu_dotxstatus+0x343/0x9f0 [brcmsmac]
  Code: 54 24 20 66 81 e2 ff 0f 41 83 e4 07 89 d1 0f b7 d2 66 c1 e9 03 0f b7 c9 4c 8d 5c 0c 48 49 8b 4d 10 48 8b 79 68 41 57 44 89 e1 <41> 0f b6 33 41 d3 e0 48 c7 c1 38 e0 ea c0 48 83 c7 10 44 21 c6 4c
  RSP: 0018:ffffa742800ecdd0 EFLAGS: 00010207
  RAX: 0000000000000019 RBX: 000000000000000b RCX: 0000000000000006
  RDX: 0000000000000ffe RSI: 0000000000000004 RDI: ffff8fc6ad776800
  RBP: ffff8fc6855acb00 R08: 0000000000000001 R09: 00000000000005d9
  R10: 00000000fffffffe R11: ffffa742800ed01f R12: 0000000000000006
  R13: ffff8fc68d75a000 R14: 00000000000005db R15: 0000000000000019
  FS:  0000000000000000(0000) GS:ffff8fc6aad00000(0000) knlGS:0000000000000000
  CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
  CR2: ffffa742800ed01f CR3: 000000002480a000 CR4: 00000000000406e0
  Call Trace:
   <IRQ>
   brcms_c_dpc+0xb46/0x1020 [brcmsmac]
   ? wlc_intstatus+0xc8/0x180 [brcmsmac]
   ? __raise_softirq_irqoff+0x1a/0x80
   brcms_dpc+0x37/0xd0 [brcmsmac]
   tasklet_action_common.constprop.0+0x51/0xb0
   __do_softirq+0xff/0x340
   ? handle_level_irq+0x1a0/0x1a0
   asm_call_on_stack+0x12/0x20
   </IRQ>
   do_softirq_own_stack+0x5f/0x80
   irq_exit_rcu+0xcb/0x120
   common_interrupt+0xd1/0x200
   asm_common_interrupt+0x1e/0x40
  RIP: 0010:cpuidle_enter_state+0xb3/0x420

Check if the block is within BA window and only then check block's
status. Otherwise as Behan wrote: "When I came back to Dublin I
was courtmartialed in my absence and sentenced to death in my absence,
so I said they could shoot me in my absence."

Also reported:
https://bbs.archlinux.org/viewtopic.php?id=258428
https://lore.kernel.org/linux-wireless/87tuwgi92n.fsf@yujinakao.com/

Reported-by: Yuji Nakao <contact@yujinakao.com>
Signed-off-by: Dmitry Safonov <dima@arista.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/20201116030635.645811-1-dima@arista.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/wireless/brcm80211/brcmsmac/ampdu.c | 11 ++++++++---
 1 file changed, 8 insertions(+), 3 deletions(-)

diff --git a/drivers/net/wireless/brcm80211/brcmsmac/ampdu.c b/drivers/net/wireless/brcm80211/brcmsmac/ampdu.c
index fa391e4eb0989..44f65b8bff9e0 100644
--- a/drivers/net/wireless/brcm80211/brcmsmac/ampdu.c
+++ b/drivers/net/wireless/brcm80211/brcmsmac/ampdu.c
@@ -953,14 +953,19 @@ brcms_c_ampdu_dotxstatus_complete(struct ampdu_info *ampdu, struct scb *scb,
 		index = TX_SEQ_TO_INDEX(seq);
 		ack_recd = false;
 		if (ba_recd) {
+			int block_acked;
+
 			bindex = MODSUB_POW2(seq, start_seq, SEQNUM_MAX);
+			if (bindex < AMPDU_TX_BA_MAX_WSIZE)
+				block_acked = isset(bitmap, bindex);
+			else
+				block_acked = 0;
 			brcms_dbg_ht(wlc->hw->d11core,
 				     "tid %d seq %d, start_seq %d, bindex %d set %d, index %d\n",
 				     tid, seq, start_seq, bindex,
-				     isset(bitmap, bindex), index);
+				     block_acked, index);
 			/* if acked then clear bit and free packet */
-			if ((bindex < AMPDU_TX_BA_MAX_WSIZE)
-			    && isset(bitmap, bindex)) {
+			if (block_acked) {
 				ini->txretry[index] = 0;
 
 				/*
-- 
2.27.0

[PATCH AUTOSEL 4.4 26/38] iommu/tegra-smmu: Expand mutex protection range

[Sasha Levin]

From: Nicolin Chen <nicoleotsuka@gmail.com>

[ Upstream commit d5f583bf8654c231b781096bc1a186065cda72b3 ]

This is used to protect potential race condition at use_count.
since probes of client drivers, calling attach_dev(), may run
concurrently.

Signed-off-by: Nicolin Chen <nicoleotsuka@gmail.com>
Tested-by: Dmitry Osipenko <digetx@gmail.com>
Reviewed-by: Dmitry Osipenko <digetx@gmail.com>
Acked-by: Thierry Reding <treding@nvidia.com>
Link: https://lore.kernel.org/r/20201125101013.14953-3-nicoleotsuka@gmail.com
Signed-off-by: Will Deacon <will@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/iommu/tegra-smmu.c | 34 +++++++++++++++++++++-------------
 1 file changed, 21 insertions(+), 13 deletions(-)

diff --git a/drivers/iommu/tegra-smmu.c b/drivers/iommu/tegra-smmu.c
index 04cec050e42bf..ae796342717a6 100644
--- a/drivers/iommu/tegra-smmu.c
+++ b/drivers/iommu/tegra-smmu.c
@@ -241,26 +241,19 @@ static int tegra_smmu_alloc_asid(struct tegra_smmu *smmu, unsigned int *idp)
 {
 	unsigned long id;
 
-	mutex_lock(&smmu->lock);
-
 	id = find_first_zero_bit(smmu->asids, smmu->soc->num_asids);
-	if (id >= smmu->soc->num_asids) {
-		mutex_unlock(&smmu->lock);
+	if (id >= smmu->soc->num_asids)
 		return -ENOSPC;
-	}
 
 	set_bit(id, smmu->asids);
 	*idp = id;
 
-	mutex_unlock(&smmu->lock);
 	return 0;
 }
 
 static void tegra_smmu_free_asid(struct tegra_smmu *smmu, unsigned int id)
 {
-	mutex_lock(&smmu->lock);
 	clear_bit(id, smmu->asids);
-	mutex_unlock(&smmu->lock);
 }
 
 static bool tegra_smmu_capable(enum iommu_cap cap)
@@ -395,17 +388,21 @@ static int tegra_smmu_as_prepare(struct tegra_smmu *smmu,
 				 struct tegra_smmu_as *as)
 {
 	u32 value;
-	int err;
+	int err = 0;
+
+	mutex_lock(&smmu->lock);
 
 	if (as->use_count > 0) {
 		as->use_count++;
-		return 0;
+		goto unlock;
 	}
 
 	as->pd_dma = dma_map_page(smmu->dev, as->pd, 0, SMMU_SIZE_PD,
 				  DMA_TO_DEVICE);
-	if (dma_mapping_error(smmu->dev, as->pd_dma))
-		return -ENOMEM;
+	if (dma_mapping_error(smmu->dev, as->pd_dma)) {
+		err = -ENOMEM;
+		goto unlock;
+	}
 
 	/* We can't handle 64-bit DMA addresses */
 	if (!smmu_dma_addr_valid(smmu, as->pd_dma)) {
@@ -428,24 +425,35 @@ static int tegra_smmu_as_prepare(struct tegra_smmu *smmu,
 	as->smmu = smmu;
 	as->use_count++;
 
+	mutex_unlock(&smmu->lock);
+
 	return 0;
 
 err_unmap:
 	dma_unmap_page(smmu->dev, as->pd_dma, SMMU_SIZE_PD, DMA_TO_DEVICE);
+unlock:
+	mutex_unlock(&smmu->lock);
+
 	return err;
 }
 
 static void tegra_smmu_as_unprepare(struct tegra_smmu *smmu,
 				    struct tegra_smmu_as *as)
 {
-	if (--as->use_count > 0)
+	mutex_lock(&smmu->lock);
+
+	if (--as->use_count > 0) {
+		mutex_unlock(&smmu->lock);
 		return;
+	}
 
 	tegra_smmu_free_asid(smmu, as->id);
 
 	dma_unmap_page(smmu->dev, as->pd_dma, SMMU_SIZE_PD, DMA_TO_DEVICE);
 
 	as->smmu = NULL;
+
+	mutex_unlock(&smmu->lock);
 }
 
 static int tegra_smmu_attach_dev(struct iommu_domain *domain,
-- 
2.27.0

[PATCH AUTOSEL 4.4 26/38] iommu/tegra-smmu: Expand mutex protection range

[Sasha Levin]

From: Nicolin Chen <nicoleotsuka@gmail.com>

[ Upstream commit d5f583bf8654c231b781096bc1a186065cda72b3 ]

This is used to protect potential race condition at use_count.
since probes of client drivers, calling attach_dev(), may run
concurrently.

Signed-off-by: Nicolin Chen <nicoleotsuka@gmail.com>
Tested-by: Dmitry Osipenko <digetx@gmail.com>
Reviewed-by: Dmitry Osipenko <digetx@gmail.com>
Acked-by: Thierry Reding <treding@nvidia.com>
Link: https://lore.kernel.org/r/20201125101013.14953-3-nicoleotsuka@gmail.com
Signed-off-by: Will Deacon <will@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/iommu/tegra-smmu.c | 34 +++++++++++++++++++++-------------
 1 file changed, 21 insertions(+), 13 deletions(-)

diff --git a/drivers/iommu/tegra-smmu.c b/drivers/iommu/tegra-smmu.c
index 04cec050e42bf..ae796342717a6 100644
--- a/drivers/iommu/tegra-smmu.c
+++ b/drivers/iommu/tegra-smmu.c
@@ -241,26 +241,19 @@ static int tegra_smmu_alloc_asid(struct tegra_smmu *smmu, unsigned int *idp)
 {
 	unsigned long id;
 
-	mutex_lock(&smmu->lock);
-
 	id = find_first_zero_bit(smmu->asids, smmu->soc->num_asids);
-	if (id >= smmu->soc->num_asids) {
-		mutex_unlock(&smmu->lock);
+	if (id >= smmu->soc->num_asids)
 		return -ENOSPC;
-	}
 
 	set_bit(id, smmu->asids);
 	*idp = id;
 
-	mutex_unlock(&smmu->lock);
 	return 0;
 }
 
 static void tegra_smmu_free_asid(struct tegra_smmu *smmu, unsigned int id)
 {
-	mutex_lock(&smmu->lock);
 	clear_bit(id, smmu->asids);
-	mutex_unlock(&smmu->lock);
 }
 
 static bool tegra_smmu_capable(enum iommu_cap cap)
@@ -395,17 +388,21 @@ static int tegra_smmu_as_prepare(struct tegra_smmu *smmu,
 				 struct tegra_smmu_as *as)
 {
 	u32 value;
-	int err;
+	int err = 0;
+
+	mutex_lock(&smmu->lock);
 
 	if (as->use_count > 0) {
 		as->use_count++;
-		return 0;
+		goto unlock;
 	}
 
 	as->pd_dma = dma_map_page(smmu->dev, as->pd, 0, SMMU_SIZE_PD,
 				  DMA_TO_DEVICE);
-	if (dma_mapping_error(smmu->dev, as->pd_dma))
-		return -ENOMEM;
+	if (dma_mapping_error(smmu->dev, as->pd_dma)) {
+		err = -ENOMEM;
+		goto unlock;
+	}
 
 	/* We can't handle 64-bit DMA addresses */
 	if (!smmu_dma_addr_valid(smmu, as->pd_dma)) {
@@ -428,24 +425,35 @@ static int tegra_smmu_as_prepare(struct tegra_smmu *smmu,
 	as->smmu = smmu;
 	as->use_count++;
 
+	mutex_unlock(&smmu->lock);
+
 	return 0;
 
 err_unmap:
 	dma_unmap_page(smmu->dev, as->pd_dma, SMMU_SIZE_PD, DMA_TO_DEVICE);
+unlock:
+	mutex_unlock(&smmu->lock);
+
 	return err;
 }
 
 static void tegra_smmu_as_unprepare(struct tegra_smmu *smmu,
 				    struct tegra_smmu_as *as)
 {
-	if (--as->use_count > 0)
+	mutex_lock(&smmu->lock);
+
+	if (--as->use_count > 0) {
+		mutex_unlock(&smmu->lock);
 		return;
+	}
 
 	tegra_smmu_free_asid(smmu, as->id);
 
 	dma_unmap_page(smmu->dev, as->pd_dma, SMMU_SIZE_PD, DMA_TO_DEVICE);
 
 	as->smmu = NULL;
+
+	mutex_unlock(&smmu->lock);
 }
 
 static int tegra_smmu_attach_dev(struct iommu_domain *domain,
-- 
2.27.0

_______________________________________________
iommu mailing list
iommu@lists.linux-foundation.org
https://lists.linuxfoundation.org/mailman/listinfo/iommu

[PATCH AUTOSEL 4.4 27/38] crypto: qce - Fix SHA result buffer corruption issues

[Sasha Levin]

From: Thara Gopinath <thara.gopinath@linaro.org>

[ Upstream commit 1148a9654b5a69611d33e14719251c6ec20f5f2c ]

Partial hash was being copied into the final result buffer without the
entire message block processed. Depending on how the end user processes
this result buffer, errors vary from result buffer corruption to result
buffer poisoing. Fix this issue by ensuring that only the final hash value
is copied into the result buffer.

Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Thara Gopinath <thara.gopinath@linaro.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/crypto/qce/sha.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/crypto/qce/sha.c b/drivers/crypto/qce/sha.c
index 0c9973ec80ebd..f55c665756724 100644
--- a/drivers/crypto/qce/sha.c
+++ b/drivers/crypto/qce/sha.c
@@ -55,7 +55,7 @@ static void qce_ahash_done(void *data)
 	dma_unmap_sg(qce->dev, &rctx->result_sg, 1, DMA_FROM_DEVICE);
 
 	memcpy(rctx->digest, result->auth_iv, digestsize);
-	if (req->result)
+	if (req->result && rctx->last_blk)
 		memcpy(req->result, result->auth_iv, digestsize);
 
 	rctx->byte_count[0] = cpu_to_be32(result->auth_byte_count[0]);
-- 
2.27.0

[PATCH AUTOSEL 4.4 28/38] media: gp8psk: initialize stats at power control logic

[Sasha Levin]

From: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>

[ Upstream commit d0ac1a26ed5943127cb0156148735f5f52a07075 ]

As reported on:
	https://lore.kernel.org/linux-media/20190627222020.45909-1-willemdebruijn.kernel@gmail.com/

if gp8psk_usb_in_op() returns an error, the status var is not
initialized. Yet, this var is used later on, in order to
identify:
	- if the device was already started;
	- if firmware has loaded;
	- if the LNBf was powered on.

Using status = 0 seems to ensure that everything will be
properly powered up.

So, instead of the proposed solution, let's just set
status = 0.

Reported-by: syzbot <syzkaller@googlegroups.com>
Reported-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/media/usb/dvb-usb/gp8psk.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/media/usb/dvb-usb/gp8psk.c b/drivers/media/usb/dvb-usb/gp8psk.c
index 5d0384dd45b5e..7225ae1905eb9 100644
--- a/drivers/media/usb/dvb-usb/gp8psk.c
+++ b/drivers/media/usb/dvb-usb/gp8psk.c
@@ -163,7 +163,7 @@ static int gp8psk_load_bcm4500fw(struct dvb_usb_device *d)
 
 static int gp8psk_power_ctrl(struct dvb_usb_device *d, int onoff)
 {
-	u8 status, buf;
+	u8 status = 0, buf;
 	int gp_product_id = le16_to_cpu(d->udev->descriptor.idProduct);
 
 	if (onoff) {
-- 
2.27.0

[PATCH AUTOSEL 4.4 29/38] net/lapb: fix t1 timer handling for LAPB_STATE_0

[Sasha Levin]

From: Martin Schiller <ms@dev.tdt.de>

[ Upstream commit 62480b992ba3fb1d7260b11293aed9d6557831c7 ]

1. DTE interface changes immediately to LAPB_STATE_1 and start sending
   SABM(E).

2. DCE interface sends N2-times DM and changes to LAPB_STATE_1
   afterwards if there is no response in the meantime.

Signed-off-by: Martin Schiller <ms@dev.tdt.de>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 net/lapb/lapb_timer.c | 11 +++++++++--
 1 file changed, 9 insertions(+), 2 deletions(-)

diff --git a/net/lapb/lapb_timer.c b/net/lapb/lapb_timer.c
index 355cc3b6fa4d3..3d99205f003da 100644
--- a/net/lapb/lapb_timer.c
+++ b/net/lapb/lapb_timer.c
@@ -92,11 +92,18 @@ static void lapb_t1timer_expiry(unsigned long param)
 	switch (lapb->state) {
 
 		/*
-		 *	If we are a DCE, keep going DM .. DM .. DM
+		 *	If we are a DCE, send DM up to N2 times, then switch to
+		 *	STATE_1 and send SABM(E).
 		 */
 		case LAPB_STATE_0:
-			if (lapb->mode & LAPB_DCE)
+			if (lapb->mode & LAPB_DCE &&
+			    lapb->n2count != lapb->n2) {
+				lapb->n2count++;
 				lapb_send_control(lapb, LAPB_DM, LAPB_POLLOFF, LAPB_RESPONSE);
+			} else {
+				lapb->state = LAPB_STATE_1;
+				lapb_establish_data_link(lapb);
+			}
 			break;
 
 		/*
-- 
2.27.0

[PATCH AUTOSEL 4.4 30/38] x86/mce: Panic for LMCE only if mca_cfg.tolerant < 3

[Sasha Levin]

From: Gabriele Paoloni <gabriele.paoloni@intel.com>

[ Upstream commit 3a866b16fd2360a9c4ebf71cfbf7ebfe968c1409 ]

Right now for LMCE, if no_way_out is set, mce_panic() is called
regardless of mca_cfg.tolerant. This is not correct as, if
mca_cfg.tolerant = 3, the code should never panic.

Add that check.

 [ bp: use local ptr 'cfg'. ]

Signed-off-by: Gabriele Paoloni <gabriele.paoloni@intel.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Reviewed-by: Tony Luck <tony.luck@intel.com>
Link: https://lkml.kernel.org/r/20201127161819.3106432-4-gabriele.paoloni@intel.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/x86/kernel/cpu/mcheck/mce.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/x86/kernel/cpu/mcheck/mce.c b/arch/x86/kernel/cpu/mcheck/mce.c
index 605395bbf0d82..e77cca7ce9169 100644
--- a/arch/x86/kernel/cpu/mcheck/mce.c
+++ b/arch/x86/kernel/cpu/mcheck/mce.c
@@ -1062,7 +1062,7 @@ void do_machine_check(struct pt_regs *regs, long error_code)
 	 * to see it will clear it.
 	 */
 	if (lmce) {
-		if (no_way_out)
+		if (no_way_out && cfg->tolerant < 3)
 			mce_panic("Fatal local machine check", &m, msg);
 	} else {
 		order = mce_start(&no_way_out);
-- 
2.27.0

[PATCH AUTOSEL 4.4 31/38] mwifiex: Fix possible buffer overflows in mwifiex_cmd_802_11_ad_hoc_start

[Sasha Levin]

From: Zhang Xiaohui <ruc_zhangxiaohui@163.com>

[ Upstream commit 5c455c5ab332773464d02ba17015acdca198f03d ]

mwifiex_cmd_802_11_ad_hoc_start() calls memcpy() without checking
the destination size may trigger a buffer overflower,
which a local user could use to cause denial of service
or the execution of arbitrary code.
Fix it by putting the length check before calling memcpy().

Signed-off-by: Zhang Xiaohui <ruc_zhangxiaohui@163.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/20201206084801.26479-1-ruc_zhangxiaohui@163.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/wireless/mwifiex/join.c | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/drivers/net/wireless/mwifiex/join.c b/drivers/net/wireless/mwifiex/join.c
index 6378dfd3b4e86..83b7cd5bdf930 100644
--- a/drivers/net/wireless/mwifiex/join.c
+++ b/drivers/net/wireless/mwifiex/join.c
@@ -856,6 +856,8 @@ mwifiex_cmd_802_11_ad_hoc_start(struct mwifiex_private *priv,
 
 	memset(adhoc_start->ssid, 0, IEEE80211_MAX_SSID_LEN);
 
+	if (req_ssid->ssid_len > IEEE80211_MAX_SSID_LEN)
+		req_ssid->ssid_len = IEEE80211_MAX_SSID_LEN;
 	memcpy(adhoc_start->ssid, req_ssid->ssid, req_ssid->ssid_len);
 
 	mwifiex_dbg(adapter, INFO, "info: ADHOC_S_CMD: SSID = %s\n",
-- 
2.27.0

[PATCH AUTOSEL 4.4 32/38] misc: vmw_vmci: fix kernel info-leak by initializing dbells in vmci_ctx_get_chkpt_doorbells()

[Sasha Levin]

From: Anant Thazhemadam <anant.thazhemadam@gmail.com>

[ Upstream commit 31dcb6c30a26d32650ce134820f27de3c675a45a ]

A kernel-infoleak was reported by syzbot, which was caused because
dbells was left uninitialized.
Using kzalloc() instead of kmalloc() fixes this issue.

Reported-by: syzbot+a79e17c39564bedf0930@syzkaller.appspotmail.com
Tested-by: syzbot+a79e17c39564bedf0930@syzkaller.appspotmail.com
Signed-off-by: Anant Thazhemadam <anant.thazhemadam@gmail.com>
Link: https://lore.kernel.org/r/20201122224534.333471-1-anant.thazhemadam@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/misc/vmw_vmci/vmci_context.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/misc/vmw_vmci/vmci_context.c b/drivers/misc/vmw_vmci/vmci_context.c
index b9da2c6cc9818..0bdfa90ea6cda 100644
--- a/drivers/misc/vmw_vmci/vmci_context.c
+++ b/drivers/misc/vmw_vmci/vmci_context.c
@@ -750,7 +750,7 @@ static int vmci_ctx_get_chkpt_doorbells(struct vmci_ctx *context,
 			return VMCI_ERROR_MORE_DATA;
 		}
 
-		dbells = kmalloc(data_size, GFP_ATOMIC);
+		dbells = kzalloc(data_size, GFP_ATOMIC);
 		if (!dbells)
 			return VMCI_ERROR_NO_MEM;
 
-- 
2.27.0

[PATCH AUTOSEL 4.4 33/38] iwlwifi: trans: consider firmware dead after errors

[Sasha Levin]

From: Johannes Berg <johannes.berg@intel.com>

[ Upstream commit 152fdc0f698896708f9d7889a4ba4da6944b74f7 ]

If we get an error, no longer consider the firmware to be
in IWL_TRANS_FW_ALIVE state.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Link: https://lore.kernel.org/r/iwlwifi.20201209231352.a9d01e79c1c7.Ib2deb076b392fb516a7230bac91d7ab8a9586d86@changeid
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/wireless/iwlwifi/iwl-trans.h | 4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)

diff --git a/drivers/net/wireless/iwlwifi/iwl-trans.h b/drivers/net/wireless/iwlwifi/iwl-trans.h
index 6f76525088f0e..8dd30de1976f0 100644
--- a/drivers/net/wireless/iwlwifi/iwl-trans.h
+++ b/drivers/net/wireless/iwlwifi/iwl-trans.h
@@ -1102,8 +1102,10 @@ static inline void iwl_trans_fw_error(struct iwl_trans *trans)
 		return;
 
 	/* prevent double restarts due to the same erroneous FW */
-	if (!test_and_set_bit(STATUS_FW_ERROR, &trans->status))
+	if (!test_and_set_bit(STATUS_FW_ERROR, &trans->status)) {
 		iwl_op_mode_nic_error(trans->op_mode);
+		trans->state = IWL_TRANS_NO_FW;
+	}
 }
 
 /*****************************************************
-- 
2.27.0

[PATCH AUTOSEL 4.4 34/38] iwlwifi: add an extra firmware state in the transport

[Sasha Levin]

From: Johannes Berg <johannes.berg@intel.com>

[ Upstream commit b2ed841ed070ccbe908016537f429a3a8f0221bf ]

Start tracking not just if the firmware is dead or alive,
but also if it's starting.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Link: https://lore.kernel.org/r/iwlwifi.20201209231352.33e50d40b688.I8bbd41af7aa5e769273a6fc1c06fbf548dd2eb26@changeid
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/wireless/iwlwifi/iwl-trans.h | 18 +++++++++++++-----
 1 file changed, 13 insertions(+), 5 deletions(-)

diff --git a/drivers/net/wireless/iwlwifi/iwl-trans.h b/drivers/net/wireless/iwlwifi/iwl-trans.h
index 8dd30de1976f0..ea60143e60fa4 100644
--- a/drivers/net/wireless/iwlwifi/iwl-trans.h
+++ b/drivers/net/wireless/iwlwifi/iwl-trans.h
@@ -619,12 +619,14 @@ struct iwl_trans_ops {
 /**
  * enum iwl_trans_state - state of the transport layer
  *
- * @IWL_TRANS_NO_FW: no fw has sent an alive response
- * @IWL_TRANS_FW_ALIVE: a fw has sent an alive response
+ * @IWL_TRANS_NO_FW: firmware wasn't started yet, or crashed
+ * @IWL_TRANS_FW_STARTED: FW was started, but not alive yet
+ * @IWL_TRANS_FW_ALIVE: FW has sent an alive response
  */
 enum iwl_trans_state {
-	IWL_TRANS_NO_FW = 0,
-	IWL_TRANS_FW_ALIVE	= 1,
+	IWL_TRANS_NO_FW,
+	IWL_TRANS_FW_STARTED,
+	IWL_TRANS_FW_ALIVE,
 };
 
 /**
@@ -780,12 +782,18 @@ static inline int iwl_trans_start_fw(struct iwl_trans *trans,
 				     const struct fw_img *fw,
 				     bool run_in_rfkill)
 {
+	int ret;
+
 	might_sleep();
 
 	WARN_ON_ONCE(!trans->rx_mpdu_cmd);
 
 	clear_bit(STATUS_FW_ERROR, &trans->status);
-	return trans->ops->start_fw(trans, fw, run_in_rfkill);
+	ret = trans->ops->start_fw(trans, fw, run_in_rfkill);
+	if (ret == 0)
+		trans->state = IWL_TRANS_FW_STARTED;
+
+	return ret;
 }
 
 static inline int iwl_trans_update_sf(struct iwl_trans *trans,
-- 
2.27.0

[PATCH AUTOSEL 4.4 35/38] mac80211: disallow band-switch during CSA

[Sasha Levin]

From: Johannes Berg <johannes.berg@intel.com>

[ Upstream commit 3660944a37ce73890292571f44f04891834f9044 ]

If the AP advertises a band switch during CSA, we will not have
the right information to continue working with it, since it will
likely (have to) change its capabilities and we don't track any
capability changes at all. Additionally, we store e.g. supported
rates per band, and that information would become invalid.

Since this is a fringe scenario, just disconnect explicitly.

Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Link: https://lore.kernel.org/r/iwlwifi.20201129172929.0e2327107c06.I461adb07704e056b054a4a7c29b80c95a9f56637@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 net/mac80211/mlme.c | 18 +++++++++++++++---
 1 file changed, 15 insertions(+), 3 deletions(-)

diff --git a/net/mac80211/mlme.c b/net/mac80211/mlme.c
index 4ab78bc6c2ca5..6a94b14817471 100644
--- a/net/mac80211/mlme.c
+++ b/net/mac80211/mlme.c
@@ -1210,6 +1210,17 @@ ieee80211_sta_process_chanswitch(struct ieee80211_sub_if_data *sdata,
 	if (res)
 		return;
 
+	if (sdata->vif.bss_conf.chandef.chan->band !=
+	    csa_ie.chandef.chan->band) {
+		sdata_info(sdata,
+			   "AP %pM switches to different band (%d MHz, width:%d, CF1/2: %d/%d MHz), disconnecting\n",
+			   ifmgd->associated->bssid,
+			   csa_ie.chandef.chan->center_freq,
+			   csa_ie.chandef.width, csa_ie.chandef.center_freq1,
+			   csa_ie.chandef.center_freq2);
+		goto lock_and_drop_connection;
+	}
+
 	if (!cfg80211_chandef_usable(local->hw.wiphy, &csa_ie.chandef,
 				     IEEE80211_CHAN_DISABLED)) {
 		sdata_info(sdata,
@@ -1218,9 +1229,7 @@ ieee80211_sta_process_chanswitch(struct ieee80211_sub_if_data *sdata,
 			   csa_ie.chandef.chan->center_freq,
 			   csa_ie.chandef.width, csa_ie.chandef.center_freq1,
 			   csa_ie.chandef.center_freq2);
-		ieee80211_queue_work(&local->hw,
-				     &ifmgd->csa_connection_drop_work);
-		return;
+		goto lock_and_drop_connection;
 	}
 
 	if (cfg80211_chandef_identical(&csa_ie.chandef,
@@ -1310,6 +1319,9 @@ ieee80211_sta_process_chanswitch(struct ieee80211_sub_if_data *sdata,
 			  TU_TO_EXP_TIME((csa_ie.count - 1) *
 					 cbss->beacon_interval));
 	return;
+ lock_and_drop_connection:
+	mutex_lock(&local->mtx);
+	mutex_lock(&local->chanctx_mtx);
  drop_connection:
 	ieee80211_queue_work(&local->hw, &ifmgd->csa_connection_drop_work);
 	mutex_unlock(&local->chanctx_mtx);
-- 
2.27.0

[PATCH AUTOSEL 4.4 36/38] mac80211: don't filter out beacons once we start CSA

[Sasha Levin]

From: Emmanuel Grumbach <emmanuel.grumbach@intel.com>

[ Upstream commit 189a164d0fc6c59a22c4486d641d0a0a0d33387a ]

I hit a bug in which we started a CSA with an action frame,
but the AP changed its mind and didn't change the beacon.
The CSA wasn't cancelled and we lost the connection.

The beacons were ignored because they never changed: they
never contained any CSA IE. Because they never changed, the
CRC of the beacon didn't change either which made us ignore
the beacons instead of processing them.

Now what happens is:
1) beacon has CRC X and it is valid. No CSA IE in the beacon
2) as long as beacon's CRC X, don't process their IEs
3) rx action frame with CSA
4) invalidate the beacon's CRC
5) rx beacon, CRC is still X, but now it is invalid
6) process the beacon, detect there is no CSA IE
7) abort CSA

Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Link: https://lore.kernel.org/r/iwlwifi.20201206145305.83470b8407e6.I739b907598001362744692744be15335436b8351@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 net/mac80211/mlme.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/net/mac80211/mlme.c b/net/mac80211/mlme.c
index 6a94b14817471..7b9766998c105 100644
--- a/net/mac80211/mlme.c
+++ b/net/mac80211/mlme.c
@@ -1296,6 +1296,7 @@ ieee80211_sta_process_chanswitch(struct ieee80211_sub_if_data *sdata,
 	sdata->csa_chandef = csa_ie.chandef;
 	sdata->csa_block_tx = csa_ie.mode;
 	ifmgd->csa_ignored_same_chan = false;
+	ifmgd->beacon_crc_valid = false;
 
 	if (sdata->csa_block_tx)
 		ieee80211_stop_vif_queues(local, sdata,
-- 
2.27.0

[PATCH AUTOSEL 4.4 37/38] ALSA: hda/hdmi: packet buffer index must be set before reading value

[Sasha Levin]

From: Kai Vehmanen <kai.vehmanen@linux.intel.com>

[ Upstream commit 46c3bbd9827952f92e250fa6ee30a797a4c4e17e ]

The check for infoframe transmit status in hdmi_infoframe_uptodate()
makes the assumption that packet buffer index is set to zero.

Align code with specification and explicitly set the index before
AC_VERB_GET_HDMI_DIP_XMIT. The packet index setting affects both
DIP-Data and DIP-XmitCtrl verbs.

There are no known cases where the old implementation has caused driver
to work incorrectly. This change is purely based on code review against
the specification (HDA spec rev1.0a).

Signed-off-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Link: https://lore.kernel.org/r/20201211131613.3271407-1-kai.vehmanen@linux.intel.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 sound/pci/hda/patch_hdmi.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/sound/pci/hda/patch_hdmi.c b/sound/pci/hda/patch_hdmi.c
index b249b1b857464..bab2b06c62b1c 100644
--- a/sound/pci/hda/patch_hdmi.c
+++ b/sound/pci/hda/patch_hdmi.c
@@ -1055,11 +1055,11 @@ static bool hdmi_infoframe_uptodate(struct hda_codec *codec, hda_nid_t pin_nid,
 	u8 val;
 	int i;
 
+	hdmi_set_dip_index(codec, pin_nid, 0x0, 0x0);
 	if (snd_hda_codec_read(codec, pin_nid, 0, AC_VERB_GET_HDMI_DIP_XMIT, 0)
 							    != AC_DIPXMIT_BEST)
 		return false;
 
-	hdmi_set_dip_index(codec, pin_nid, 0x0, 0x0);
 	for (i = 0; i < size; i++) {
 		val = snd_hda_codec_read(codec, pin_nid, 0,
 					 AC_VERB_GET_HDMI_DIP_DATA, 0);
-- 
2.27.0

[PATCH AUTOSEL 4.4 37/38] ALSA: hda/hdmi: packet buffer index must be set before reading value

[Sasha Levin]

From: Kai Vehmanen <kai.vehmanen@linux.intel.com>

[ Upstream commit 46c3bbd9827952f92e250fa6ee30a797a4c4e17e ]

The check for infoframe transmit status in hdmi_infoframe_uptodate()
makes the assumption that packet buffer index is set to zero.

Align code with specification and explicitly set the index before
AC_VERB_GET_HDMI_DIP_XMIT. The packet index setting affects both
DIP-Data and DIP-XmitCtrl verbs.

There are no known cases where the old implementation has caused driver
to work incorrectly. This change is purely based on code review against
the specification (HDA spec rev1.0a).

Signed-off-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Link: https://lore.kernel.org/r/20201211131613.3271407-1-kai.vehmanen@linux.intel.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 sound/pci/hda/patch_hdmi.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/sound/pci/hda/patch_hdmi.c b/sound/pci/hda/patch_hdmi.c
index b249b1b857464..bab2b06c62b1c 100644
--- a/sound/pci/hda/patch_hdmi.c
+++ b/sound/pci/hda/patch_hdmi.c
@@ -1055,11 +1055,11 @@ static bool hdmi_infoframe_uptodate(struct hda_codec *codec, hda_nid_t pin_nid,
 	u8 val;
 	int i;
 
+	hdmi_set_dip_index(codec, pin_nid, 0x0, 0x0);
 	if (snd_hda_codec_read(codec, pin_nid, 0, AC_VERB_GET_HDMI_DIP_XMIT, 0)
 							    != AC_DIPXMIT_BEST)
 		return false;
 
-	hdmi_set_dip_index(codec, pin_nid, 0x0, 0x0);
 	for (i = 0; i < size; i++) {
 		val = snd_hda_codec_read(codec, pin_nid, 0,
 					 AC_VERB_GET_HDMI_DIP_DATA, 0);
-- 
2.27.0

[PATCH AUTOSEL 4.4 38/38] PCI: Add function 1 DMA alias quirk for Marvell 9215 SATA controller

[Sasha Levin]

From: Bjorn Helgaas <bhelgaas@google.com>

[ Upstream commit 059983790a4c963d92943e55a61fca55be427d55 ]

Add function 1 DMA alias quirk for Marvell 88SS9215 PCIe SSD Controller.

Link: https://bugzilla.kernel.org/show_bug.cgi?id=42679#c135
Link: https://lore.kernel.org/r/20201110220516.697934-1-helgaas@kernel.org
Reported-by: John Smith <LK7S2ED64JHGLKj75shg9klejHWG49h5hk@protonmail.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/pci/quirks.c | 3 +++
 1 file changed, 3 insertions(+)

diff --git a/drivers/pci/quirks.c b/drivers/pci/quirks.c
index bdaeccafa261b..bc0aa0849e72e 100644
--- a/drivers/pci/quirks.c
+++ b/drivers/pci/quirks.c
@@ -3649,6 +3649,9 @@ DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_MARVELL_EXT, 0x917a,
 /* https://bugzilla.kernel.org/show_bug.cgi?id=42679#c46 */
 DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_MARVELL_EXT, 0x91a0,
 			 quirk_dma_func1_alias);
+/* https://bugzilla.kernel.org/show_bug.cgi?id=42679#c135 */
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_MARVELL_EXT, 0x9215,
+			 quirk_dma_func1_alias);
 /* https://bugzilla.kernel.org/show_bug.cgi?id=42679#c127 */
 DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_MARVELL_EXT, 0x9220,
 			 quirk_dma_func1_alias);
-- 
2.27.0

Re: [PATCH AUTOSEL 4.4 03/38] staging: wimax: depends on NET

[Jakub Kicinski]

On Tue, 22 Dec 2020 21:24:41 -0500 Sasha Levin wrote:
> From: Randy Dunlap <rdunlap@infradead.org>
> 
> [ Upstream commit 9364a2cf567187c0a075942c22d1f434c758de5d ]
> 
> Fix build errors when CONFIG_NET is not enabled. E.g. (trimmed):

This one can be dropped, before wimax moved to staging the dependency
was met thru the directory structure.

Re: [PATCH AUTOSEL 4.4 03/38] staging: wimax: depends on NET

[Sasha Levin]

On Tue, Dec 22, 2020 at 06:38:01PM -0800, Jakub Kicinski wrote:
>On Tue, 22 Dec 2020 21:24:41 -0500 Sasha Levin wrote:
>> From: Randy Dunlap <rdunlap@infradead.org>
>>
>> [ Upstream commit 9364a2cf567187c0a075942c22d1f434c758de5d ]
>>
>> Fix build errors when CONFIG_NET is not enabled. E.g. (trimmed):
>
>This one can be dropped, before wimax moved to staging the dependency
>was met thru the directory structure.

I'll drop it, thanks.

-- 
Thanks,
Sasha