All of lore.kernel.org
 help / color / mirror / Atom feed
From: Taehee Yoo <ap420073@gmail.com>
To: davem@davemloft.net, kuba@kernel.org, netdev@vger.kernel.org
Cc: ap420073@gmail.com, martin.varghese@nokia.com
Subject: [PATCH net 2/2] bareudp: Fix use of incorrect min_headroom size
Date: Sat, 26 Dec 2020 17:13:08 +0000	[thread overview]
Message-ID: <20201226171308.4226-1-ap420073@gmail.com> (raw)

In the bareudp6_xmit_skb(), it calculates min_headroom.
At that point, it uses struct iphdr, but it's not correct.
So panic could occur.
The struct ipv6hdr should be used.

Test commands:
    ip netns add A
    ip netns add B
    ip link add veth0 type veth peer name veth1
    ip link set veth0 netns A
    ip netns exec A ip link set veth0 up
    ip netns exec A ip a a 2001:db8:0::1/64 dev veth0
    ip netns exec B ip link set veth1 up
    ip netns exec B ip a a 2001:db8:0::2/64 dev veth1

    for i in {10..1}
    do
            let A=$i-1
            ip netns exec A ip link add bareudp$i type bareudp dstport $i \
		    ethertype 0x86dd
            ip netns exec A ip link set bareudp$i up
            ip netns exec A ip -6 a a 2001:db8:$i::1/64 dev bareudp$i
            ip netns exec A ip -6 r a 2001:db8:$i::2 encap ip6 src \
		    2001:db8:$A::1 dst 2001:db8:$A::2 via 2001:db8:$i::2 \
		    dev bareudp$i

            ip netns exec B ip link add bareudp$i type bareudp dstport $i \
		    ethertype 0x86dd
            ip netns exec B ip link set bareudp$i up
            ip netns exec B ip -6 a a 2001:db8:$i::2/64 dev bareudp$i
            ip netns exec B ip -6 r a 2001:db8:$i::1 encap ip6 src \
		    2001:db8:$A::2 dst 2001:db8:$A::1 via 2001:db8:$i::1 \
		    dev bareudp$i
    done
    ip netns exec A ping 2001:db8:7::2

Splat looks like:
[   66.436679][    C2] skbuff: skb_under_panic: text:ffffffff928614c8 len:454 put:14 head:ffff88810abb4000 data:ffff88810abb3ffa tail:0x1c0 end:0x3ec0 dev:veth0
[   66.441626][    C2] ------------[ cut here ]------------
[   66.443458][    C2] kernel BUG at net/core/skbuff.c:109!
[   66.445313][    C2] invalid opcode: 0000 [#1] SMP DEBUG_PAGEALLOC KASAN PTI
[   66.447606][    C2] CPU: 2 PID: 913 Comm: ping Not tainted 5.10.0+ #819
[   66.450251][    C2] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.10.2-1ubuntu1 04/01/2014
[   66.453713][    C2] RIP: 0010:skb_panic+0x15d/0x15f
[   66.455345][    C2] Code: 98 fe 4c 8b 4c 24 10 53 8b 4d 70 45 89 e0 48 c7 c7 60 8b 78 93 41 57 41 56 41 55 48 8b 54 24 20 48 8b 74 24 28 e8 b5 40 f9 ff <0f> 0b 48 8b 6c 24 20 89 34 24 e8 08 c9 98 fe 8b 34 24 48 c7 c1 80
[   66.462314][    C2] RSP: 0018:ffff888119209648 EFLAGS: 00010286
[   66.464281][    C2] RAX: 0000000000000089 RBX: ffff888003159000 RCX: 0000000000000000
[   66.467216][    C2] RDX: 0000000000000089 RSI: 0000000000000008 RDI: ffffed10232412c0
[   66.469768][    C2] RBP: ffff88810a53d440 R08: ffffed102328018d R09: ffffed102328018d
[   66.472297][    C2] R10: ffff888119400c67 R11: ffffed102328018c R12: 000000000000000e
[   66.474833][    C2] R13: ffff88810abb3ffa R14: 00000000000001c0 R15: 0000000000003ec0
[   66.477361][    C2] FS:  00007f37c0c72f00(0000) GS:ffff888119200000(0000) knlGS:0000000000000000
[   66.480214][    C2] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[   66.482296][    C2] CR2: 000055a058808570 CR3: 000000011039e002 CR4: 00000000003706e0
[   66.484811][    C2] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[   66.487793][    C2] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
[   66.490424][    C2] Call Trace:
[   66.491469][    C2]  <IRQ>
[   66.492374][    C2]  ? eth_header+0x28/0x190
[   66.494054][    C2]  ? eth_header+0x28/0x190
[   66.495401][    C2]  skb_push.cold.99+0x22/0x22
[   66.496700][    C2]  eth_header+0x28/0x190
[   66.497867][    C2]  neigh_resolve_output+0x3de/0x720
[   66.499615][    C2]  ? __neigh_update+0x7e8/0x20a0
[   66.501176][    C2]  __neigh_update+0x8bd/0x20a0
[   66.502749][    C2]  ndisc_update+0x34/0xc0
[   66.504010][    C2]  ndisc_recv_na+0x8da/0xb80
[   66.505041][    C2]  ? pndisc_redo+0x20/0x20
[   66.505888][    C2]  ? rcu_read_lock_sched_held+0xc0/0xc0
[   66.506965][    C2]  ndisc_rcv+0x3a0/0x470
[   66.507797][    C2]  icmpv6_rcv+0xad9/0x1b00
[   66.508645][    C2]  ip6_protocol_deliver_rcu+0xcd6/0x1560
[   66.509719][    C2]  ip6_input_finish+0x5b/0xf0
[   66.510615][    C2]  ip6_input+0xcd/0x2d0
[   66.511406][    C2]  ? ip6_input_finish+0xf0/0xf0
[   66.512327][    C2]  ? rcu_read_lock_held+0x91/0xa0
[   66.513279][    C2]  ? ip6_protocol_deliver_rcu+0x1560/0x1560
[   66.514414][    C2]  ipv6_rcv+0xe8/0x300
[ ... ]

Fixes: 571912c69f0e ("net: UDP tunnel encapsulation module for tunnelling different protocols like MPLS, IP, NSH etc.")
Signed-off-by: Taehee Yoo <ap420073@gmail.com>
---
 drivers/net/bareudp.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/net/bareudp.c b/drivers/net/bareudp.c
index aea10196c222..708171c0d628 100644
--- a/drivers/net/bareudp.c
+++ b/drivers/net/bareudp.c
@@ -380,7 +380,7 @@ static int bareudp6_xmit_skb(struct sk_buff *skb, struct net_device *dev,
 		goto free_dst;
 
 	min_headroom = LL_RESERVED_SPACE(dst->dev) + dst->header_len +
-		BAREUDP_BASE_HLEN + info->options_len + sizeof(struct iphdr);
+		BAREUDP_BASE_HLEN + info->options_len + sizeof(struct ipv6hdr);
 
 	err = skb_cow_head(skb, min_headroom);
 	if (unlikely(err))
-- 
2.17.1


             reply	other threads:[~2020-12-26 17:15 UTC|newest]

Thread overview: 3+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2020-12-26 17:13 Taehee Yoo [this message]
2020-12-27 16:33 ` [PATCH net 2/2] bareudp: Fix use of incorrect min_headroom size Guillaume Nault
2020-12-28  2:26   ` Taehee Yoo

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20201226171308.4226-1-ap420073@gmail.com \
    --to=ap420073@gmail.com \
    --cc=davem@davemloft.net \
    --cc=kuba@kernel.org \
    --cc=martin.varghese@nokia.com \
    --cc=netdev@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.