* [PATCH] arm64: dts: allwinner: h5: Add deinterlace node
@ 2021-01-06 18:25 ` Jernej Skrabec
0 siblings, 0 replies; 4+ messages in thread
From: Jernej Skrabec @ 2021-01-06 18:25 UTC (permalink / raw)
To: robh+dt, mripard, wens
Cc: linux-media, devicetree, linux-arm-kernel, linux-kernel,
jernej.skrabec, linux-sunxi
Deinterlace core is completely compatible to H3.
Add a node for it.
Signed-off-by: Jernej Skrabec <jernej.skrabec@siol.net>
---
Note: I didn't add H5 fallback, since the only reason why this node
is not in common H3/H5 dtsi is that it's located on different addresses.
If anyone feel fallback compatible is needed, I'll add it in next revision.
arch/arm64/boot/dts/allwinner/sun50i-h5.dtsi | 13 +++++++++++++
1 file changed, 13 insertions(+)
diff --git a/arch/arm64/boot/dts/allwinner/sun50i-h5.dtsi b/arch/arm64/boot/dts/allwinner/sun50i-h5.dtsi
index 10489e508695..578a63dedf46 100644
--- a/arch/arm64/boot/dts/allwinner/sun50i-h5.dtsi
+++ b/arch/arm64/boot/dts/allwinner/sun50i-h5.dtsi
@@ -121,6 +121,19 @@ crypto: crypto@1c15000 {
resets = <&ccu RST_BUS_CE>;
};
+ deinterlace: deinterlace@1e00000 {
+ compatible = "allwinner,sun8i-h3-deinterlace";
+ reg = <0x01e00000 0x20000>;
+ clocks = <&ccu CLK_BUS_DEINTERLACE>,
+ <&ccu CLK_DEINTERLACE>,
+ <&ccu CLK_DRAM_DEINTERLACE>;
+ clock-names = "bus", "mod", "ram";
+ resets = <&ccu RST_BUS_DEINTERLACE>;
+ interrupts = <GIC_SPI 93 IRQ_TYPE_LEVEL_HIGH>;
+ interconnects = <&mbus 9>;
+ interconnect-names = "dma-mem";
+ };
+
mali: gpu@1e80000 {
compatible = "allwinner,sun50i-h5-mali", "arm,mali-450";
reg = <0x01e80000 0x30000>;
--
2.30.0
^ permalink raw reply related [flat|nested] 4+ messages in thread
* [PATCH] arm64: dts: allwinner: h5: Add deinterlace node
@ 2021-01-06 18:25 ` Jernej Skrabec
0 siblings, 0 replies; 4+ messages in thread
From: Jernej Skrabec @ 2021-01-06 18:25 UTC (permalink / raw)
To: robh+dt, mripard, wens
Cc: devicetree, jernej.skrabec, linux-kernel, linux-sunxi,
linux-arm-kernel, linux-media
Deinterlace core is completely compatible to H3.
Add a node for it.
Signed-off-by: Jernej Skrabec <jernej.skrabec@siol.net>
---
Note: I didn't add H5 fallback, since the only reason why this node
is not in common H3/H5 dtsi is that it's located on different addresses.
If anyone feel fallback compatible is needed, I'll add it in next revision.
arch/arm64/boot/dts/allwinner/sun50i-h5.dtsi | 13 +++++++++++++
1 file changed, 13 insertions(+)
diff --git a/arch/arm64/boot/dts/allwinner/sun50i-h5.dtsi b/arch/arm64/boot/dts/allwinner/sun50i-h5.dtsi
index 10489e508695..578a63dedf46 100644
--- a/arch/arm64/boot/dts/allwinner/sun50i-h5.dtsi
+++ b/arch/arm64/boot/dts/allwinner/sun50i-h5.dtsi
@@ -121,6 +121,19 @@ crypto: crypto@1c15000 {
resets = <&ccu RST_BUS_CE>;
};
+ deinterlace: deinterlace@1e00000 {
+ compatible = "allwinner,sun8i-h3-deinterlace";
+ reg = <0x01e00000 0x20000>;
+ clocks = <&ccu CLK_BUS_DEINTERLACE>,
+ <&ccu CLK_DEINTERLACE>,
+ <&ccu CLK_DRAM_DEINTERLACE>;
+ clock-names = "bus", "mod", "ram";
+ resets = <&ccu RST_BUS_DEINTERLACE>;
+ interrupts = <GIC_SPI 93 IRQ_TYPE_LEVEL_HIGH>;
+ interconnects = <&mbus 9>;
+ interconnect-names = "dma-mem";
+ };
+
mali: gpu@1e80000 {
compatible = "allwinner,sun50i-h5-mali", "arm,mali-450";
reg = <0x01e80000 0x30000>;
--
2.30.0
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply related [flat|nested] 4+ messages in thread
* Re: [PATCH] arm64: dts: allwinner: h5: Add deinterlace node
2021-01-06 18:25 ` Jernej Skrabec
@ 2021-01-07 9:40 ` Maxime Ripard
-1 siblings, 0 replies; 4+ messages in thread
From: Maxime Ripard @ 2021-01-07 9:40 UTC (permalink / raw)
To: Jernej Skrabec
Cc: robh+dt, wens, linux-media, devicetree, linux-arm-kernel,
linux-kernel, linux-sunxi
[-- Attachment #1: Type: text/plain, Size: 470 bytes --]
On Wed, Jan 06, 2021 at 07:25:23PM +0100, Jernej Skrabec wrote:
> Deinterlace core is completely compatible to H3.
>
> Add a node for it.
>
> Signed-off-by: Jernej Skrabec <jernej.skrabec@siol.net>
> ---
> Note: I didn't add H5 fallback, since the only reason why this node
> is not in common H3/H5 dtsi is that it's located on different addresses.
>
> If anyone feel fallback compatible is needed, I'll add it in next revision.
Applied, thanks
Maxime
[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 228 bytes --]
^ permalink raw reply [flat|nested] 4+ messages in thread
* Re: [PATCH] arm64: dts: allwinner: h5: Add deinterlace node
@ 2021-01-07 9:40 ` Maxime Ripard
0 siblings, 0 replies; 4+ messages in thread
From: Maxime Ripard @ 2021-01-07 9:40 UTC (permalink / raw)
To: Jernej Skrabec
Cc: devicetree, linux-sunxi, linux-kernel, wens, robh+dt,
linux-arm-kernel, linux-media
[-- Attachment #1.1: Type: text/plain, Size: 470 bytes --]
On Wed, Jan 06, 2021 at 07:25:23PM +0100, Jernej Skrabec wrote:
> Deinterlace core is completely compatible to H3.
>
> Add a node for it.
>
> Signed-off-by: Jernej Skrabec <jernej.skrabec@siol.net>
> ---
> Note: I didn't add H5 fallback, since the only reason why this node
> is not in common H3/H5 dtsi is that it's located on different addresses.
>
> If anyone feel fallback compatible is needed, I'll add it in next revision.
Applied, thanks
Maxime
[-- Attachment #1.2: signature.asc --]
[-- Type: application/pgp-signature, Size: 228 bytes --]
[-- Attachment #2: Type: text/plain, Size: 176 bytes --]
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply [flat|nested] 4+ messages in thread
end of thread, other threads:[~2021-01-07 9:42 UTC | newest]
Thread overview: 4+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2021-01-06 18:25 [PATCH] arm64: dts: allwinner: h5: Add deinterlace node Jernej Skrabec
2021-01-06 18:25 ` Jernej Skrabec
2021-01-07 9:40 ` Maxime Ripard
2021-01-07 9:40 ` Maxime Ripard
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.