* [PATCH v6 1/3] sunxi: board: extract creating a unique sid into a helper function
2021-01-10 19:29 [PATCH v6 0/3] sunxi: Add support for OrangePi 3 Jernej Skrabec
@ 2021-01-10 19:29 ` Jernej Skrabec
2021-01-10 19:29 ` [PATCH v6 2/3] arm: sunxi: add a config option to fixup a Bluetooth address Jernej Skrabec
` (2 subsequent siblings)
3 siblings, 0 replies; 9+ messages in thread
From: Jernej Skrabec @ 2021-01-10 19:29 UTC (permalink / raw)
To: u-boot
From: Andre Heider <a.heider@gmail.com>
Refactor setup_environment() so we can use the created sid for a
Bluetooth address too.
Acked-by: Maxime Ripard <mripard@kernel.org>
Reviewed-by: Andre Przywara <andre.przywara@arm.com>
Signed-off-by: Andre Heider <a.heider@gmail.com>
[rebased]
Signed-off-by: Jernej Skrabec <jernej.skrabec@siol.net>
---
board/sunxi/board.c | 121 ++++++++++++++++++++++++--------------------
1 file changed, 66 insertions(+), 55 deletions(-)
diff --git a/board/sunxi/board.c b/board/sunxi/board.c
index 708a27ed78e9..4a29e351141b 100644
--- a/board/sunxi/board.c
+++ b/board/sunxi/board.c
@@ -789,6 +789,38 @@ static void parse_spl_header(const uint32_t spl_addr)
env_set_hex("fel_scriptaddr", spl->fel_script_address);
}
+static bool get_unique_sid(unsigned int *sid)
+{
+ if (sunxi_get_sid(sid) != 0)
+ return false;
+
+ if (!sid[0])
+ return false;
+
+ /*
+ * The single words 1 - 3 of the SID have quite a few bits
+ * which are the same on many models, so we take a crc32
+ * of all 3 words, to get a more unique value.
+ *
+ * Note we only do this on newer SoCs as we cannot change
+ * the algorithm on older SoCs since those have been using
+ * fixed mac-addresses based on only using word 3 for a
+ * long time and changing a fixed mac-address with an
+ * u-boot update is not good.
+ */
+#if !defined(CONFIG_MACH_SUN4I) && !defined(CONFIG_MACH_SUN5I) && \
+ !defined(CONFIG_MACH_SUN6I) && !defined(CONFIG_MACH_SUN7I) && \
+ !defined(CONFIG_MACH_SUN8I_A23) && !defined(CONFIG_MACH_SUN8I_A33)
+ sid[3] = crc32(0, (unsigned char *)&sid[1], 12);
+#endif
+
+ /* Ensure the NIC specific bytes of the mac are not all 0 */
+ if ((sid[3] & 0xffffff) == 0)
+ sid[3] |= 0x800000;
+
+ return true;
+}
+
/*
* Note this function gets called multiple times.
* It must not make any changes to env variables which already exist.
@@ -799,61 +831,40 @@ static void setup_environment(const void *fdt)
unsigned int sid[4];
uint8_t mac_addr[6];
char ethaddr[16];
- int i, ret;
-
- ret = sunxi_get_sid(sid);
- if (ret == 0 && sid[0] != 0) {
- /*
- * The single words 1 - 3 of the SID have quite a few bits
- * which are the same on many models, so we take a crc32
- * of all 3 words, to get a more unique value.
- *
- * Note we only do this on newer SoCs as we cannot change
- * the algorithm on older SoCs since those have been using
- * fixed mac-addresses based on only using word 3 for a
- * long time and changing a fixed mac-address with an
- * u-boot update is not good.
- */
-#if !defined(CONFIG_MACH_SUN4I) && !defined(CONFIG_MACH_SUN5I) && \
- !defined(CONFIG_MACH_SUN6I) && !defined(CONFIG_MACH_SUN7I) && \
- !defined(CONFIG_MACH_SUN8I_A23) && !defined(CONFIG_MACH_SUN8I_A33)
- sid[3] = crc32(0, (unsigned char *)&sid[1], 12);
-#endif
-
- /* Ensure the NIC specific bytes of the mac are not all 0 */
- if ((sid[3] & 0xffffff) == 0)
- sid[3] |= 0x800000;
-
- for (i = 0; i < 4; i++) {
- sprintf(ethaddr, "ethernet%d", i);
- if (!fdt_get_alias(fdt, ethaddr))
- continue;
-
- if (i == 0)
- strcpy(ethaddr, "ethaddr");
- else
- sprintf(ethaddr, "eth%daddr", i);
-
- if (env_get(ethaddr))
- continue;
-
- /* Non OUI / registered MAC address */
- mac_addr[0] = (i << 4) | 0x02;
- mac_addr[1] = (sid[0] >> 0) & 0xff;
- mac_addr[2] = (sid[3] >> 24) & 0xff;
- mac_addr[3] = (sid[3] >> 16) & 0xff;
- mac_addr[4] = (sid[3] >> 8) & 0xff;
- mac_addr[5] = (sid[3] >> 0) & 0xff;
-
- eth_env_set_enetaddr(ethaddr, mac_addr);
- }
-
- if (!env_get("serial#")) {
- snprintf(serial_string, sizeof(serial_string),
- "%08x%08x", sid[0], sid[3]);
-
- env_set("serial#", serial_string);
- }
+ int i;
+
+ if (!get_unique_sid(sid))
+ return;
+
+ for (i = 0; i < 4; i++) {
+ sprintf(ethaddr, "ethernet%d", i);
+ if (!fdt_get_alias(fdt, ethaddr))
+ continue;
+
+ if (i == 0)
+ strcpy(ethaddr, "ethaddr");
+ else
+ sprintf(ethaddr, "eth%daddr", i);
+
+ if (env_get(ethaddr))
+ continue;
+
+ /* Non OUI / registered MAC address */
+ mac_addr[0] = (i << 4) | 0x02;
+ mac_addr[1] = (sid[0] >> 0) & 0xff;
+ mac_addr[2] = (sid[3] >> 24) & 0xff;
+ mac_addr[3] = (sid[3] >> 16) & 0xff;
+ mac_addr[4] = (sid[3] >> 8) & 0xff;
+ mac_addr[5] = (sid[3] >> 0) & 0xff;
+
+ eth_env_set_enetaddr(ethaddr, mac_addr);
+ }
+
+ if (!env_get("serial#")) {
+ snprintf(serial_string, sizeof(serial_string),
+ "%08x%08x", sid[0], sid[3]);
+
+ env_set("serial#", serial_string);
}
}
--
2.30.0
^ permalink raw reply related [flat|nested] 9+ messages in thread* [PATCH v6 2/3] arm: sunxi: add a config option to fixup a Bluetooth address
2021-01-10 19:29 [PATCH v6 0/3] sunxi: Add support for OrangePi 3 Jernej Skrabec
2021-01-10 19:29 ` [PATCH v6 1/3] sunxi: board: extract creating a unique sid into a helper function Jernej Skrabec
@ 2021-01-10 19:29 ` Jernej Skrabec
2021-01-10 19:29 ` [PATCH v6 3/3] arm64: dts: sun50i: Add support for Orange Pi 3 Jernej Skrabec
2021-01-10 23:07 ` [PATCH v6 0/3] sunxi: Add support for OrangePi 3 André Przywara
3 siblings, 0 replies; 9+ messages in thread
From: Jernej Skrabec @ 2021-01-10 19:29 UTC (permalink / raw)
To: u-boot
From: Andre Heider <a.heider@gmail.com>
Some Bluetooth controllers, like the BCM4345C5 of the Orange Pi 3,
ship with the controller default address.
Add a config option to fix it up so it can function properly.
Signed-off-by: Andre Heider <a.heider@gmail.com>
Tested-by: Ondrej Jirman <megous@megous.com>
Acked-by: Maxime Ripard <mripard@kernel.org>
[rebased]
Signed-off-by: Jernej Skrabec <jernej.skrabec@siol.net>
---
arch/arm/mach-sunxi/Kconfig | 11 +++++++++++
board/sunxi/board.c | 34 ++++++++++++++++++++++++++++++++++
2 files changed, 45 insertions(+)
diff --git a/arch/arm/mach-sunxi/Kconfig b/arch/arm/mach-sunxi/Kconfig
index 49ef217f08c0..11e644519271 100644
--- a/arch/arm/mach-sunxi/Kconfig
+++ b/arch/arm/mach-sunxi/Kconfig
@@ -1016,4 +1016,15 @@ config PINEPHONE_DT_SELECTION
Enable this option to automatically select the device tree for the
correct PinePhone hardware revision during boot.
+config BLUETOOTH_DT_DEVICE_FIXUP
+ string "Fixup the Bluetooth controller address"
+ default ""
+ help
+ This option specifies the DT compatible name of the Bluetooth
+ controller for which to set the "local-bd-address" property.
+ Set this option if your device ships with the Bluetooth controller
+ default address.
+ The used address is "bdaddr" if set, and "ethaddr" with the LSB
+ flipped elsewise.
+
endif
diff --git a/board/sunxi/board.c b/board/sunxi/board.c
index 4a29e351141b..ed658fced3c7 100644
--- a/board/sunxi/board.c
+++ b/board/sunxi/board.c
@@ -908,6 +908,38 @@ int misc_init_r(void)
return 0;
}
+static void bluetooth_dt_fixup(void *blob)
+{
+ /* Some devices ship with a Bluetooth controller default address.
+ * Set a valid address through the device tree.
+ */
+ uchar tmp[ETH_ALEN], bdaddr[ETH_ALEN];
+ unsigned int sid[4];
+ int i;
+
+ if (!CONFIG_BLUETOOTH_DT_DEVICE_FIXUP[0])
+ return;
+
+ if (eth_env_get_enetaddr("bdaddr", tmp)) {
+ /* Convert between the binary formats of the corresponding stacks */
+ for (i = 0; i < ETH_ALEN; ++i)
+ bdaddr[i] = tmp[ETH_ALEN - i - 1];
+ } else {
+ if (!get_unique_sid(sid))
+ return;
+
+ bdaddr[0] = ((sid[3] >> 0) & 0xff) ^ 1;
+ bdaddr[1] = (sid[3] >> 8) & 0xff;
+ bdaddr[2] = (sid[3] >> 16) & 0xff;
+ bdaddr[3] = (sid[3] >> 24) & 0xff;
+ bdaddr[4] = (sid[0] >> 0) & 0xff;
+ bdaddr[5] = 0x02;
+ }
+
+ do_fixup_by_compat(blob, CONFIG_BLUETOOTH_DT_DEVICE_FIXUP,
+ "local-bd-address", bdaddr, ETH_ALEN, 1);
+}
+
int ft_board_setup(void *blob, struct bd_info *bd)
{
int __maybe_unused r;
@@ -918,6 +950,8 @@ int ft_board_setup(void *blob, struct bd_info *bd)
*/
setup_environment(blob);
+ bluetooth_dt_fixup(blob);
+
#ifdef CONFIG_VIDEO_DT_SIMPLEFB
r = sunxi_simplefb_setup(blob);
if (r)
--
2.30.0
^ permalink raw reply related [flat|nested] 9+ messages in thread* [PATCH v6 3/3] arm64: dts: sun50i: Add support for Orange Pi 3
2021-01-10 19:29 [PATCH v6 0/3] sunxi: Add support for OrangePi 3 Jernej Skrabec
2021-01-10 19:29 ` [PATCH v6 1/3] sunxi: board: extract creating a unique sid into a helper function Jernej Skrabec
2021-01-10 19:29 ` [PATCH v6 2/3] arm: sunxi: add a config option to fixup a Bluetooth address Jernej Skrabec
@ 2021-01-10 19:29 ` Jernej Skrabec
2021-01-10 19:31 ` Jernej Škrabec
2021-01-10 23:16 ` [linux-sunxi] " Samuel Holland
2021-01-10 23:07 ` [PATCH v6 0/3] sunxi: Add support for OrangePi 3 André Przywara
3 siblings, 2 replies; 9+ messages in thread
From: Jernej Skrabec @ 2021-01-10 19:29 UTC (permalink / raw)
To: u-boot
From: Andre Heider <a.heider@gmail.com>
dts file is taken from Linux 5.11-rc1 tag.
The Bluetooth controller of this device ships with a default address,
use the new CONFIG_FIXUP_BDADDR option to fix it up.
akonadi:?collection=30&name=INBOX
Acked-by: Maxime Ripard <mripard@kernel.org>
Signed-off-by: Andre Heider <a.heider@gmail.com>
[Updated OrangePi 3 DT, rebase and config update]
Signed-off-by: Jernej Skrabec <jernej.skrabec@siol.net>
---
arch/arm/dts/Makefile | 1 +
arch/arm/dts/sun50i-h6-orangepi-3.dts | 345 ++++++++++++++++++++++++++
board/sunxi/MAINTAINERS | 5 +
configs/orangepi_3_defconfig | 12 +
4 files changed, 363 insertions(+)
create mode 100644 arch/arm/dts/sun50i-h6-orangepi-3.dts
create mode 100644 configs/orangepi_3_defconfig
diff --git a/arch/arm/dts/Makefile b/arch/arm/dts/Makefile
index e00aed1ec207..607571d04b25 100644
--- a/arch/arm/dts/Makefile
+++ b/arch/arm/dts/Makefile
@@ -605,6 +605,7 @@ dtb-$(CONFIG_MACH_SUN50I_H5) += \
sun50i-h5-orangepi-zero-plus2.dtb
dtb-$(CONFIG_MACH_SUN50I_H6) += \
sun50i-h6-beelink-gs1.dtb \
+ sun50i-h6-orangepi-3.dtb \
sun50i-h6-orangepi-lite2.dtb \
sun50i-h6-orangepi-one-plus.dtb \
sun50i-h6-pine-h64.dtb \
diff --git a/arch/arm/dts/sun50i-h6-orangepi-3.dts b/arch/arm/dts/sun50i-h6-orangepi-3.dts
new file mode 100644
index 000000000000..15c9dd8c4479
--- /dev/null
+++ b/arch/arm/dts/sun50i-h6-orangepi-3.dts
@@ -0,0 +1,345 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+// Copyright (C) 2019 Ond?ej Jirman <megous@megous.com>
+
+/dts-v1/;
+
+#include "sun50i-h6.dtsi"
+#include "sun50i-h6-cpu-opp.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+
+/ {
+ model = "OrangePi 3";
+ compatible = "xunlong,orangepi-3", "allwinner,sun50i-h6";
+
+ aliases {
+ serial0 = &uart0;
+ serial1 = &uart1;
+ };
+
+ chosen {
+ stdout-path = "serial0:115200n8";
+ };
+
+ connector {
+ compatible = "hdmi-connector";
+ ddc-en-gpios = <&pio 7 2 GPIO_ACTIVE_HIGH>; /* PH2 */
+ type = "a";
+
+ port {
+ hdmi_con_in: endpoint {
+ remote-endpoint = <&hdmi_out_con>;
+ };
+ };
+ };
+
+ ext_osc32k: ext_osc32k_clk {
+ #clock-cells = <0>;
+ compatible = "fixed-clock";
+ clock-frequency = <32768>;
+ clock-output-names = "ext_osc32k";
+ };
+
+ leds {
+ compatible = "gpio-leds";
+
+ power {
+ label = "orangepi:red:power";
+ gpios = <&r_pio 0 4 GPIO_ACTIVE_HIGH>; /* PL4 */
+ default-state = "on";
+ };
+
+ status {
+ label = "orangepi:green:status";
+ gpios = <&r_pio 0 7 GPIO_ACTIVE_HIGH>; /* PL7 */
+ };
+ };
+
+ reg_vcc5v: vcc5v {
+ /* board wide 5V supply directly from the DC jack */
+ compatible = "regulator-fixed";
+ regulator-name = "vcc-5v";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ regulator-always-on;
+ };
+
+ reg_vcc33_wifi: vcc33-wifi {
+ /* Always on 3.3V regulator for WiFi and BT */
+ compatible = "regulator-fixed";
+ regulator-name = "vcc33-wifi";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ vin-supply = <®_vcc5v>;
+ };
+
+ reg_vcc_wifi_io: vcc-wifi-io {
+ /* Always on 1.8V/300mA regulator for WiFi and BT IO */
+ compatible = "regulator-fixed";
+ regulator-name = "vcc-wifi-io";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-always-on;
+ vin-supply = <®_vcc33_wifi>;
+ };
+
+ wifi_pwrseq: wifi-pwrseq {
+ compatible = "mmc-pwrseq-simple";
+ clocks = <&rtc 1>;
+ clock-names = "ext_clock";
+ reset-gpios = <&r_pio 1 3 GPIO_ACTIVE_LOW>; /* PM3 */
+ post-power-on-delay-ms = <200>;
+ };
+};
+
+&cpu0 {
+ cpu-supply = <®_dcdca>;
+};
+
+&de {
+ status = "okay";
+};
+
+&dwc3 {
+ status = "okay";
+};
+
+&ehci0 {
+ status = "okay";
+};
+
+&ehci3 {
+ status = "okay";
+};
+
+&gpu {
+ mali-supply = <®_dcdcc>;
+ status = "okay";
+};
+
+&hdmi {
+ status = "okay";
+};
+
+&hdmi_out {
+ hdmi_out_con: endpoint {
+ remote-endpoint = <&hdmi_con_in>;
+ };
+};
+
+&mmc0 {
+ vmmc-supply = <®_cldo1>;
+ cd-gpios = <&pio 5 6 GPIO_ACTIVE_LOW>; /* PF6 */
+ bus-width = <4>;
+ status = "okay";
+};
+
+&mmc1 {
+ vmmc-supply = <®_vcc33_wifi>;
+ vqmmc-supply = <®_vcc_wifi_io>;
+ mmc-pwrseq = <&wifi_pwrseq>;
+ bus-width = <4>;
+ non-removable;
+ status = "okay";
+
+ brcm: sdio-wifi at 1 {
+ reg = <1>;
+ compatible = "brcm,bcm4329-fmac";
+ interrupt-parent = <&r_pio>;
+ interrupts = <1 0 IRQ_TYPE_LEVEL_LOW>; /* PM0 */
+ interrupt-names = "host-wake";
+ };
+};
+
+&mmc2 {
+ vmmc-supply = <®_cldo1>;
+ vqmmc-supply = <®_bldo2>;
+ cap-mmc-hw-reset;
+ non-removable;
+ bus-width = <8>;
+ status = "okay";
+};
+
+&ohci0 {
+ status = "okay";
+};
+
+&ohci3 {
+ status = "okay";
+};
+
+&pio {
+ vcc-pc-supply = <®_bldo2>;
+ vcc-pd-supply = <®_cldo1>;
+ vcc-pg-supply = <®_vcc_wifi_io>;
+};
+
+&r_i2c {
+ status = "okay";
+
+ axp805: pmic at 36 {
+ compatible = "x-powers,axp805", "x-powers,axp806";
+ reg = <0x36>;
+ interrupt-parent = <&r_intc>;
+ interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
+ interrupt-controller;
+ #interrupt-cells = <1>;
+ x-powers,self-working-mode;
+ vina-supply = <®_vcc5v>;
+ vinb-supply = <®_vcc5v>;
+ vinc-supply = <®_vcc5v>;
+ vind-supply = <®_vcc5v>;
+ vine-supply = <®_vcc5v>;
+ aldoin-supply = <®_vcc5v>;
+ bldoin-supply = <®_vcc5v>;
+ cldoin-supply = <®_vcc5v>;
+
+ regulators {
+ reg_aldo1: aldo1 {
+ regulator-always-on;
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-name = "vcc-pl-led-ir";
+ };
+
+ reg_aldo2: aldo2 {
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-name = "vcc33-audio-tv-ephy-mac";
+ };
+
+ /* ALDO3 is shorted to CLDO1 */
+ reg_aldo3: aldo3 {
+ regulator-always-on;
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-name = "vcc33-io-pd-emmc-sd-usb-uart-1";
+ };
+
+ reg_bldo1: bldo1 {
+ regulator-always-on;
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-name = "vcc18-dram-bias-pll";
+ };
+
+ reg_bldo2: bldo2 {
+ regulator-always-on;
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-name = "vcc-efuse-pcie-hdmi-pc";
+ };
+
+ bldo3 {
+ /* unused */
+ };
+
+ bldo4 {
+ /* unused */
+ };
+
+ reg_cldo1: cldo1 {
+ regulator-always-on;
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-name = "vcc33-io-pd-emmc-sd-usb-uart-2";
+ };
+
+ cldo2 {
+ /* unused */
+ };
+
+ cldo3 {
+ /* unused */
+ };
+
+ reg_dcdca: dcdca {
+ regulator-always-on;
+ regulator-min-microvolt = <800000>;
+ regulator-max-microvolt = <1160000>;
+ regulator-ramp-delay = <2500>;
+ regulator-name = "vdd-cpu";
+ };
+
+ reg_dcdcc: dcdcc {
+ regulator-enable-ramp-delay = <32000>;
+ regulator-min-microvolt = <810000>;
+ regulator-max-microvolt = <1080000>;
+ regulator-ramp-delay = <2500>;
+ regulator-name = "vdd-gpu";
+ };
+
+ reg_dcdcd: dcdcd {
+ regulator-always-on;
+ regulator-min-microvolt = <960000>;
+ regulator-max-microvolt = <960000>;
+ regulator-name = "vdd-sys";
+ };
+
+ reg_dcdce: dcdce {
+ regulator-always-on;
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1200000>;
+ regulator-name = "vcc-dram";
+ };
+
+ sw {
+ /* unused */
+ };
+ };
+ };
+};
+
+&r_ir {
+ status = "okay";
+};
+
+&rtc {
+ clocks = <&ext_osc32k>;
+};
+
+&uart0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart0_ph_pins>;
+ status = "okay";
+};
+
+/* There's the BT part of the AP6256 connected to that UART */
+&uart1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart1_pins>, <&uart1_rts_cts_pins>;
+ uart-has-rtscts;
+ status = "okay";
+
+ bluetooth {
+ compatible = "brcm,bcm4345c5";
+ clocks = <&rtc 1>;
+ clock-names = "lpo";
+ device-wakeup-gpios = <&r_pio 1 2 GPIO_ACTIVE_HIGH>; /* PM2 */
+ host-wakeup-gpios = <&r_pio 1 1 GPIO_ACTIVE_HIGH>; /* PM1 */
+ shutdown-gpios = <&r_pio 1 4 GPIO_ACTIVE_HIGH>; /* PM4 */
+ max-speed = <1500000>;
+ };
+};
+
+&usb2otg {
+ /*
+ * This board doesn't have a controllable VBUS even though it
+ * does have an ID pin. Using it as anything but a USB host is
+ * unsafe.
+ */
+ dr_mode = "host";
+ status = "okay";
+};
+
+&usb2phy {
+ usb0_id_det-gpios = <&pio 2 15 GPIO_ACTIVE_HIGH>; /* PC15 */
+ usb0_vbus-supply = <®_vcc5v>;
+ usb3_vbus-supply = <®_vcc5v>;
+ status = "okay";
+};
+
+&usb3phy {
+ status = "okay";
+};
diff --git a/board/sunxi/MAINTAINERS b/board/sunxi/MAINTAINERS
index 1b37a9899edd..95b4df83e0a9 100644
--- a/board/sunxi/MAINTAINERS
+++ b/board/sunxi/MAINTAINERS
@@ -385,6 +385,11 @@ M: Icenowy Zheng <icenowy@aosc.io>
S: Maintained
F: configs/teres_i_defconfig
+ORANGEPI 3 BOARD
+M: Andre Heider <a.heider@gmail.com>
+S: Maintained
+F: configs/orangepi_3_defconfig
+
ORANGEPI LITE2 BOARD
M: Jagan Teki <jagan@amarulasolutions.com>
S: Maintained
diff --git a/configs/orangepi_3_defconfig b/configs/orangepi_3_defconfig
new file mode 100644
index 000000000000..82b9815205ef
--- /dev/null
+++ b/configs/orangepi_3_defconfig
@@ -0,0 +1,12 @@
+CONFIG_ARM=y
+CONFIG_ARCH_SUNXI=y
+CONFIG_SPL=y
+CONFIG_MACH_SUN50I_H6=y
+CONFIG_SUNXI_DRAM_H6_LPDDR3=y
+CONFIG_MMC0_CD_PIN="PF6"
+CONFIG_MMC_SUNXI_SLOT_EXTRA=2
+CONFIG_BLUETOOTH_DT_DEVICE_FIXUP="brcm,bcm4345c5"
+CONFIG_DEFAULT_DEVICE_TREE="sun50i-h6-orangepi-3"
+# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
+CONFIG_USB_EHCI_HCD=y
+CONFIG_USB_OHCI_HCD=y
--
2.30.0
^ permalink raw reply related [flat|nested] 9+ messages in thread* [PATCH v6 3/3] arm64: dts: sun50i: Add support for Orange Pi 3
2021-01-10 19:29 ` [PATCH v6 3/3] arm64: dts: sun50i: Add support for Orange Pi 3 Jernej Skrabec
@ 2021-01-10 19:31 ` Jernej Škrabec
2021-01-10 23:16 ` [linux-sunxi] " Samuel Holland
1 sibling, 0 replies; 9+ messages in thread
From: Jernej Škrabec @ 2021-01-10 19:31 UTC (permalink / raw)
To: u-boot
Dne nedelja, 10. januar 2021 ob 20:29:39 CET je Jernej Skrabec napisal(a):
> From: Andre Heider <a.heider@gmail.com>
>
> dts file is taken from Linux 5.11-rc1 tag.
>
> The Bluetooth controller of this device ships with a default address,
> use the new CONFIG_FIXUP_BDADDR option to fix it up.
>
> akonadi:?collection=30&name=INBOX
Andre,
This ^ should be your tag. Can you fix it at committing?
Best regard,
Jernej
> Acked-by: Maxime Ripard <mripard@kernel.org>
> Signed-off-by: Andre Heider <a.heider@gmail.com>
> [Updated OrangePi 3 DT, rebase and config update]
> Signed-off-by: Jernej Skrabec <jernej.skrabec@siol.net>
> ---
> arch/arm/dts/Makefile | 1 +
> arch/arm/dts/sun50i-h6-orangepi-3.dts | 345 ++++++++++++++++++++++++++
> board/sunxi/MAINTAINERS | 5 +
> configs/orangepi_3_defconfig | 12 +
> 4 files changed, 363 insertions(+)
> create mode 100644 arch/arm/dts/sun50i-h6-orangepi-3.dts
> create mode 100644 configs/orangepi_3_defconfig
>
> diff --git a/arch/arm/dts/Makefile b/arch/arm/dts/Makefile
> index e00aed1ec207..607571d04b25 100644
> --- a/arch/arm/dts/Makefile
> +++ b/arch/arm/dts/Makefile
> @@ -605,6 +605,7 @@ dtb-$(CONFIG_MACH_SUN50I_H5) += \
> sun50i-h5-orangepi-zero-plus2.dtb
> dtb-$(CONFIG_MACH_SUN50I_H6) += \
> sun50i-h6-beelink-gs1.dtb \
> + sun50i-h6-orangepi-3.dtb \
> sun50i-h6-orangepi-lite2.dtb \
> sun50i-h6-orangepi-one-plus.dtb \
> sun50i-h6-pine-h64.dtb \
> diff --git a/arch/arm/dts/sun50i-h6-orangepi-3.dts b/arch/arm/dts/sun50i-h6-
orangepi-3.dts
> new file mode 100644
> index 000000000000..15c9dd8c4479
> --- /dev/null
> +++ b/arch/arm/dts/sun50i-h6-orangepi-3.dts
> @@ -0,0 +1,345 @@
> +// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
> +// Copyright (C) 2019 Ond?ej Jirman <megous@megous.com>
> +
> +/dts-v1/;
> +
> +#include "sun50i-h6.dtsi"
> +#include "sun50i-h6-cpu-opp.dtsi"
> +
> +#include <dt-bindings/gpio/gpio.h>
> +
> +/ {
> + model = "OrangePi 3";
> + compatible = "xunlong,orangepi-3", "allwinner,sun50i-h6";
> +
> + aliases {
> + serial0 = &uart0;
> + serial1 = &uart1;
> + };
> +
> + chosen {
> + stdout-path = "serial0:115200n8";
> + };
> +
> + connector {
> + compatible = "hdmi-connector";
> + ddc-en-gpios = <&pio 7 2 GPIO_ACTIVE_HIGH>; /* PH2 */
> + type = "a";
> +
> + port {
> + hdmi_con_in: endpoint {
> + remote-endpoint = <&hdmi_out_con>;
> + };
> + };
> + };
> +
> + ext_osc32k: ext_osc32k_clk {
> + #clock-cells = <0>;
> + compatible = "fixed-clock";
> + clock-frequency = <32768>;
> + clock-output-names = "ext_osc32k";
> + };
> +
> + leds {
> + compatible = "gpio-leds";
> +
> + power {
> + label = "orangepi:red:power";
> + gpios = <&r_pio 0 4 GPIO_ACTIVE_HIGH>; /* PL4
*/
> + default-state = "on";
> + };
> +
> + status {
> + label = "orangepi:green:status";
> + gpios = <&r_pio 0 7 GPIO_ACTIVE_HIGH>; /* PL7
*/
> + };
> + };
> +
> + reg_vcc5v: vcc5v {
> + /* board wide 5V supply directly from the DC jack */
> + compatible = "regulator-fixed";
> + regulator-name = "vcc-5v";
> + regulator-min-microvolt = <5000000>;
> + regulator-max-microvolt = <5000000>;
> + regulator-always-on;
> + };
> +
> + reg_vcc33_wifi: vcc33-wifi {
> + /* Always on 3.3V regulator for WiFi and BT */
> + compatible = "regulator-fixed";
> + regulator-name = "vcc33-wifi";
> + regulator-min-microvolt = <3300000>;
> + regulator-max-microvolt = <3300000>;
> + regulator-always-on;
> + vin-supply = <®_vcc5v>;
> + };
> +
> + reg_vcc_wifi_io: vcc-wifi-io {
> + /* Always on 1.8V/300mA regulator for WiFi and BT IO */
> + compatible = "regulator-fixed";
> + regulator-name = "vcc-wifi-io";
> + regulator-min-microvolt = <1800000>;
> + regulator-max-microvolt = <1800000>;
> + regulator-always-on;
> + vin-supply = <®_vcc33_wifi>;
> + };
> +
> + wifi_pwrseq: wifi-pwrseq {
> + compatible = "mmc-pwrseq-simple";
> + clocks = <&rtc 1>;
> + clock-names = "ext_clock";
> + reset-gpios = <&r_pio 1 3 GPIO_ACTIVE_LOW>; /* PM3 */
> + post-power-on-delay-ms = <200>;
> + };
> +};
> +
> +&cpu0 {
> + cpu-supply = <®_dcdca>;
> +};
> +
> +&de {
> + status = "okay";
> +};
> +
> +&dwc3 {
> + status = "okay";
> +};
> +
> +&ehci0 {
> + status = "okay";
> +};
> +
> +&ehci3 {
> + status = "okay";
> +};
> +
> +&gpu {
> + mali-supply = <®_dcdcc>;
> + status = "okay";
> +};
> +
> +&hdmi {
> + status = "okay";
> +};
> +
> +&hdmi_out {
> + hdmi_out_con: endpoint {
> + remote-endpoint = <&hdmi_con_in>;
> + };
> +};
> +
> +&mmc0 {
> + vmmc-supply = <®_cldo1>;
> + cd-gpios = <&pio 5 6 GPIO_ACTIVE_LOW>; /* PF6 */
> + bus-width = <4>;
> + status = "okay";
> +};
> +
> +&mmc1 {
> + vmmc-supply = <®_vcc33_wifi>;
> + vqmmc-supply = <®_vcc_wifi_io>;
> + mmc-pwrseq = <&wifi_pwrseq>;
> + bus-width = <4>;
> + non-removable;
> + status = "okay";
> +
> + brcm: sdio-wifi at 1 {
> + reg = <1>;
> + compatible = "brcm,bcm4329-fmac";
> + interrupt-parent = <&r_pio>;
> + interrupts = <1 0 IRQ_TYPE_LEVEL_LOW>; /* PM0 */
> + interrupt-names = "host-wake";
> + };
> +};
> +
> +&mmc2 {
> + vmmc-supply = <®_cldo1>;
> + vqmmc-supply = <®_bldo2>;
> + cap-mmc-hw-reset;
> + non-removable;
> + bus-width = <8>;
> + status = "okay";
> +};
> +
> +&ohci0 {
> + status = "okay";
> +};
> +
> +&ohci3 {
> + status = "okay";
> +};
> +
> +&pio {
> + vcc-pc-supply = <®_bldo2>;
> + vcc-pd-supply = <®_cldo1>;
> + vcc-pg-supply = <®_vcc_wifi_io>;
> +};
> +
> +&r_i2c {
> + status = "okay";
> +
> + axp805: pmic at 36 {
> + compatible = "x-powers,axp805", "x-powers,axp806";
> + reg = <0x36>;
> + interrupt-parent = <&r_intc>;
> + interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
> + interrupt-controller;
> + #interrupt-cells = <1>;
> + x-powers,self-working-mode;
> + vina-supply = <®_vcc5v>;
> + vinb-supply = <®_vcc5v>;
> + vinc-supply = <®_vcc5v>;
> + vind-supply = <®_vcc5v>;
> + vine-supply = <®_vcc5v>;
> + aldoin-supply = <®_vcc5v>;
> + bldoin-supply = <®_vcc5v>;
> + cldoin-supply = <®_vcc5v>;
> +
> + regulators {
> + reg_aldo1: aldo1 {
> + regulator-always-on;
> + regulator-min-microvolt =
<3300000>;
> + regulator-max-microvolt =
<3300000>;
> + regulator-name = "vcc-pl-led-ir";
> + };
> +
> + reg_aldo2: aldo2 {
> + regulator-min-microvolt =
<3300000>;
> + regulator-max-microvolt =
<3300000>;
> + regulator-name = "vcc33-audio-tv-
ephy-mac";
> + };
> +
> + /* ALDO3 is shorted to CLDO1 */
> + reg_aldo3: aldo3 {
> + regulator-always-on;
> + regulator-min-microvolt =
<3300000>;
> + regulator-max-microvolt =
<3300000>;
> + regulator-name = "vcc33-io-pd-
emmc-sd-usb-uart-1";
> + };
> +
> + reg_bldo1: bldo1 {
> + regulator-always-on;
> + regulator-min-microvolt =
<1800000>;
> + regulator-max-microvolt =
<1800000>;
> + regulator-name = "vcc18-dram-bias-
pll";
> + };
> +
> + reg_bldo2: bldo2 {
> + regulator-always-on;
> + regulator-min-microvolt =
<1800000>;
> + regulator-max-microvolt =
<1800000>;
> + regulator-name = "vcc-efuse-pcie-
hdmi-pc";
> + };
> +
> + bldo3 {
> + /* unused */
> + };
> +
> + bldo4 {
> + /* unused */
> + };
> +
> + reg_cldo1: cldo1 {
> + regulator-always-on;
> + regulator-min-microvolt =
<3300000>;
> + regulator-max-microvolt =
<3300000>;
> + regulator-name = "vcc33-io-pd-
emmc-sd-usb-uart-2";
> + };
> +
> + cldo2 {
> + /* unused */
> + };
> +
> + cldo3 {
> + /* unused */
> + };
> +
> + reg_dcdca: dcdca {
> + regulator-always-on;
> + regulator-min-microvolt =
<800000>;
> + regulator-max-microvolt =
<1160000>;
> + regulator-ramp-delay = <2500>;
> + regulator-name = "vdd-cpu";
> + };
> +
> + reg_dcdcc: dcdcc {
> + regulator-enable-ramp-delay =
<32000>;
> + regulator-min-microvolt =
<810000>;
> + regulator-max-microvolt =
<1080000>;
> + regulator-ramp-delay = <2500>;
> + regulator-name = "vdd-gpu";
> + };
> +
> + reg_dcdcd: dcdcd {
> + regulator-always-on;
> + regulator-min-microvolt =
<960000>;
> + regulator-max-microvolt =
<960000>;
> + regulator-name = "vdd-sys";
> + };
> +
> + reg_dcdce: dcdce {
> + regulator-always-on;
> + regulator-min-microvolt =
<1200000>;
> + regulator-max-microvolt =
<1200000>;
> + regulator-name = "vcc-dram";
> + };
> +
> + sw {
> + /* unused */
> + };
> + };
> + };
> +};
> +
> +&r_ir {
> + status = "okay";
> +};
> +
> +&rtc {
> + clocks = <&ext_osc32k>;
> +};
> +
> +&uart0 {
> + pinctrl-names = "default";
> + pinctrl-0 = <&uart0_ph_pins>;
> + status = "okay";
> +};
> +
> +/* There's the BT part of the AP6256 connected to that UART */
> +&uart1 {
> + pinctrl-names = "default";
> + pinctrl-0 = <&uart1_pins>, <&uart1_rts_cts_pins>;
> + uart-has-rtscts;
> + status = "okay";
> +
> + bluetooth {
> + compatible = "brcm,bcm4345c5";
> + clocks = <&rtc 1>;
> + clock-names = "lpo";
> + device-wakeup-gpios = <&r_pio 1 2 GPIO_ACTIVE_HIGH>; /*
PM2 */
> + host-wakeup-gpios = <&r_pio 1 1 GPIO_ACTIVE_HIGH>; /*
PM1 */
> + shutdown-gpios = <&r_pio 1 4 GPIO_ACTIVE_HIGH>; /* PM4
*/
> + max-speed = <1500000>;
> + };
> +};
> +
> +&usb2otg {
> + /*
> + * This board doesn't have a controllable VBUS even though it
> + * does have an ID pin. Using it as anything but a USB host is
> + * unsafe.
> + */
> + dr_mode = "host";
> + status = "okay";
> +};
> +
> +&usb2phy {
> + usb0_id_det-gpios = <&pio 2 15 GPIO_ACTIVE_HIGH>; /* PC15 */
> + usb0_vbus-supply = <®_vcc5v>;
> + usb3_vbus-supply = <®_vcc5v>;
> + status = "okay";
> +};
> +
> +&usb3phy {
> + status = "okay";
> +};
> diff --git a/board/sunxi/MAINTAINERS b/board/sunxi/MAINTAINERS
> index 1b37a9899edd..95b4df83e0a9 100644
> --- a/board/sunxi/MAINTAINERS
> +++ b/board/sunxi/MAINTAINERS
> @@ -385,6 +385,11 @@ M: Icenowy Zheng <icenowy@aosc.io>
> S: Maintained
> F: configs/teres_i_defconfig
>
> +ORANGEPI 3 BOARD
> +M: Andre Heider <a.heider@gmail.com>
> +S: Maintained
> +F: configs/orangepi_3_defconfig
> +
> ORANGEPI LITE2 BOARD
> M: Jagan Teki <jagan@amarulasolutions.com>
> S: Maintained
> diff --git a/configs/orangepi_3_defconfig b/configs/orangepi_3_defconfig
> new file mode 100644
> index 000000000000..82b9815205ef
> --- /dev/null
> +++ b/configs/orangepi_3_defconfig
> @@ -0,0 +1,12 @@
> +CONFIG_ARM=y
> +CONFIG_ARCH_SUNXI=y
> +CONFIG_SPL=y
> +CONFIG_MACH_SUN50I_H6=y
> +CONFIG_SUNXI_DRAM_H6_LPDDR3=y
> +CONFIG_MMC0_CD_PIN="PF6"
> +CONFIG_MMC_SUNXI_SLOT_EXTRA=2
> +CONFIG_BLUETOOTH_DT_DEVICE_FIXUP="brcm,bcm4345c5"
> +CONFIG_DEFAULT_DEVICE_TREE="sun50i-h6-orangepi-3"
> +# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
> +CONFIG_USB_EHCI_HCD=y
> +CONFIG_USB_OHCI_HCD=y
> --
> 2.30.0
>
>
^ permalink raw reply [flat|nested] 9+ messages in thread* [linux-sunxi] [PATCH v6 3/3] arm64: dts: sun50i: Add support for Orange Pi 3
2021-01-10 19:29 ` [PATCH v6 3/3] arm64: dts: sun50i: Add support for Orange Pi 3 Jernej Skrabec
2021-01-10 19:31 ` Jernej Škrabec
@ 2021-01-10 23:16 ` Samuel Holland
2021-01-10 23:27 ` André Przywara
1 sibling, 1 reply; 9+ messages in thread
From: Samuel Holland @ 2021-01-10 23:16 UTC (permalink / raw)
To: u-boot
On 1/10/21 1:29 PM, Jernej Skrabec wrote:
> From: Andre Heider <a.heider@gmail.com>
>
> dts file is taken from Linux 5.11-rc1 tag.
>
> The Bluetooth controller of this device ships with a default address,
> use the new CONFIG_FIXUP_BDADDR option to fix it up.
This still references the old config name. It should be
CONFIG_BLUETOOTH_DT_DEVICE_FIXUP.
Cheers,
Samuel
> akonadi:?collection=30&name=INBOX
> Acked-by: Maxime Ripard <mripard@kernel.org>
> Signed-off-by: Andre Heider <a.heider@gmail.com>
> [Updated OrangePi 3 DT, rebase and config update]
> Signed-off-by: Jernej Skrabec <jernej.skrabec@siol.net>
^ permalink raw reply [flat|nested] 9+ messages in thread
* [linux-sunxi] [PATCH v6 3/3] arm64: dts: sun50i: Add support for Orange Pi 3
2021-01-10 23:16 ` [linux-sunxi] " Samuel Holland
@ 2021-01-10 23:27 ` André Przywara
0 siblings, 0 replies; 9+ messages in thread
From: André Przywara @ 2021-01-10 23:27 UTC (permalink / raw)
To: u-boot
On 10/01/2021 23:16, Samuel Holland wrote:
> On 1/10/21 1:29 PM, Jernej Skrabec wrote:
>> From: Andre Heider <a.heider@gmail.com>
>>
>> dts file is taken from Linux 5.11-rc1 tag.
>>
>> The Bluetooth controller of this device ships with a default address,
>> use the new CONFIG_FIXUP_BDADDR option to fix it up.
>
> This still references the old config name. It should be
> CONFIG_BLUETOOTH_DT_DEVICE_FIXUP.
Ah, thanks for pointing this out. I checked the usage in the code, but
missed the commit message.
Will fix it up in my branch.
Cheers,
Andre
^ permalink raw reply [flat|nested] 9+ messages in thread
* [PATCH v6 0/3] sunxi: Add support for OrangePi 3
2021-01-10 19:29 [PATCH v6 0/3] sunxi: Add support for OrangePi 3 Jernej Skrabec
` (2 preceding siblings ...)
2021-01-10 19:29 ` [PATCH v6 3/3] arm64: dts: sun50i: Add support for Orange Pi 3 Jernej Skrabec
@ 2021-01-10 23:07 ` André Przywara
2021-01-12 13:17 ` Andre Heider
3 siblings, 1 reply; 9+ messages in thread
From: André Przywara @ 2021-01-10 23:07 UTC (permalink / raw)
To: u-boot
On 10/01/2021 19:29, Jernej Skrabec wrote:
> This series introduces OrangePi 3 support.
>
> Previous cover letter:
> This is just refreshed v4 from here:
> https://patchwork.ozlabs.org/project/uboot/list/?series=156657&state=*
>
> Patches are only rebased, DT updated and defconfig regenerated, so
> I kept old tags. Only difference with old version is that this one
> does not sync H6 DT files. Becasue of that, this series should be
> applied on top of:
> https://patchwork.ozlabs.org/project/uboot/list/?series=222516
I applied and pushed 1/3 and 2/3.
Put 3/3 on my next branch, behind the H6 DT update, to be pushed as soon
as we get the RGMII PHY mode patch in.
Thanks!
Andre
> Please take a look.
>
> Best regards,
> Jernej
>
> Changes from v5:
> - Added tags
> - Renamed FIXUP_BDADDR -> BLUETOOTH_DT_DEVICE_FIXUP
> - Renamed fixup_bd_address() -> bluetooth_dt_fixup()
> - Removed CONFIG_PSCI_RESET from defconfig
>
> Andre Heider (3):
> sunxi: board: extract creating a unique sid into a helper function
> arm: sunxi: add a config option to fixup a Bluetooth address
> arm64: dts: sun50i: Add support for Orange Pi 3
>
> arch/arm/dts/Makefile | 1 +
> arch/arm/dts/sun50i-h6-orangepi-3.dts | 345 ++++++++++++++++++++++++++
> arch/arm/mach-sunxi/Kconfig | 11 +
> board/sunxi/MAINTAINERS | 5 +
> board/sunxi/board.c | 155 ++++++++----
> configs/orangepi_3_defconfig | 12 +
> 6 files changed, 474 insertions(+), 55 deletions(-)
> create mode 100644 arch/arm/dts/sun50i-h6-orangepi-3.dts
> create mode 100644 configs/orangepi_3_defconfig
>
^ permalink raw reply [flat|nested] 9+ messages in thread* [PATCH v6 0/3] sunxi: Add support for OrangePi 3
2021-01-10 23:07 ` [PATCH v6 0/3] sunxi: Add support for OrangePi 3 André Przywara
@ 2021-01-12 13:17 ` Andre Heider
0 siblings, 0 replies; 9+ messages in thread
From: Andre Heider @ 2021-01-12 13:17 UTC (permalink / raw)
To: u-boot
On 11/01/2021 00:07, Andr? Przywara wrote:
> On 10/01/2021 19:29, Jernej Skrabec wrote:
>> This series introduces OrangePi 3 support.
>>
>> Previous cover letter:
>> This is just refreshed v4 from here:
>> https://patchwork.ozlabs.org/project/uboot/list/?series=156657&state=*
>>
>> Patches are only rebased, DT updated and defconfig regenerated, so
>> I kept old tags. Only difference with old version is that this one
>> does not sync H6 DT files. Becasue of that, this series should be
>> applied on top of:
>> https://patchwork.ozlabs.org/project/uboot/list/?series=222516
>
> I applied and pushed 1/3 and 2/3.
>
> Put 3/3 on my next branch, behind the H6 DT update, to be pushed as soon
> as we get the RGMII PHY mode patch in.
>
> Thanks!
> Andre
Nice, thanks!
And thank you Jernej for picking this up and getting it over the line!
Andre
>
>> Please take a look.
>>
>> Best regards,
>> Jernej
>>
>> Changes from v5:
>> - Added tags
>> - Renamed FIXUP_BDADDR -> BLUETOOTH_DT_DEVICE_FIXUP
>> - Renamed fixup_bd_address() -> bluetooth_dt_fixup()
>> - Removed CONFIG_PSCI_RESET from defconfig
>>
>> Andre Heider (3):
>> sunxi: board: extract creating a unique sid into a helper function
>> arm: sunxi: add a config option to fixup a Bluetooth address
>> arm64: dts: sun50i: Add support for Orange Pi 3
>>
>> arch/arm/dts/Makefile | 1 +
>> arch/arm/dts/sun50i-h6-orangepi-3.dts | 345 ++++++++++++++++++++++++++
>> arch/arm/mach-sunxi/Kconfig | 11 +
>> board/sunxi/MAINTAINERS | 5 +
>> board/sunxi/board.c | 155 ++++++++----
>> configs/orangepi_3_defconfig | 12 +
>> 6 files changed, 474 insertions(+), 55 deletions(-)
>> create mode 100644 arch/arm/dts/sun50i-h6-orangepi-3.dts
>> create mode 100644 configs/orangepi_3_defconfig
>>
>
^ permalink raw reply [flat|nested] 9+ messages in thread