All of lore.kernel.org
 help / color / mirror / Atom feed
From: Ben Levinsky <ben.levinsky@xilinx.com>
To: <mathieu.poirier@linaro.org>
Cc: <devicetree@vger.kernel.org>, <linux-remoteproc@vger.kernel.org>,
	<linux-kernel@vger.kernel.org>,
	<linux-arm-kernel@lists.infradead.org>, <michal.simek@xilinx.com>
Subject: [PATCH v25 1/5] firmware: xilinx: Add ZynqMP firmware ioctl enums for RPU configuration.
Date: Sun, 10 Jan 2021 18:02:46 -0800	[thread overview]
Message-ID: <20210111020250.6846-2-ben.levinsky@xilinx.com> (raw)
In-Reply-To: <20210111020250.6846-1-ben.levinsky@xilinx.com>

Add ZynqMP firmware ioctl enums for RPU configuration and TCM Nodes for
later use via request_node and release_node

Signed-off-by: Ben Levinsky <ben.levinsky@xilinx.com>
---
v25:
- update include/linux/firmware/xlnx-zynqmp.h style to match for enum
---
 include/linux/firmware/xlnx-zynqmp.h | 23 +++++++++++++++++++++++
 1 file changed, 23 insertions(+)

diff --git a/include/linux/firmware/xlnx-zynqmp.h b/include/linux/firmware/xlnx-zynqmp.h
index 5968df82b991..e4044cae0713 100644
--- a/include/linux/firmware/xlnx-zynqmp.h
+++ b/include/linux/firmware/xlnx-zynqmp.h
@@ -104,6 +104,10 @@ enum pm_ret_status {
 };
 
 enum pm_ioctl_id {
+	IOCTL_GET_RPU_OPER_MODE = 0,
+	IOCTL_SET_RPU_OPER_MODE = 1,
+	IOCTL_RPU_BOOT_ADDR_CONFIG = 2,
+	IOCTL_TCM_COMB_CONFIG = 3,
 	IOCTL_SD_DLL_RESET = 6,
 	IOCTL_SET_SD_TAPDELAY,
 	IOCTL_SET_PLL_FRAC_MODE,
@@ -129,6 +133,21 @@ enum pm_query_id {
 	PM_QID_CLOCK_GET_MAX_DIVISOR,
 };
 
+enum rpu_oper_mode {
+	PM_RPU_MODE_LOCKSTEP = 0,
+	PM_RPU_MODE_SPLIT = 1,
+};
+
+enum rpu_boot_mem {
+	PM_RPU_BOOTMEM_LOVEC = 0,
+	PM_RPU_BOOTMEM_HIVEC = 1,
+};
+
+enum rpu_tcm_comb {
+	PM_RPU_TCM_SPLIT = 0,
+	PM_RPU_TCM_COMB = 1,
+};
+
 enum zynqmp_pm_reset_action {
 	PM_RESET_ACTION_RELEASE,
 	PM_RESET_ACTION_ASSERT,
@@ -273,6 +292,10 @@ enum zynqmp_pm_request_ack {
 };
 
 enum pm_node_id {
+	NODE_TCM_0_A = 15,
+	NODE_TCM_0_B,
+	NODE_TCM_1_A,
+	NODE_TCM_1_B,
 	NODE_SD_0 = 39,
 	NODE_SD_1,
 };
-- 
2.17.1


WARNING: multiple messages have this Message-ID (diff)
From: Ben Levinsky <ben.levinsky@xilinx.com>
To: <mathieu.poirier@linaro.org>
Cc: devicetree@vger.kernel.org, linux-remoteproc@vger.kernel.org,
	linux-kernel@vger.kernel.org,
	linux-arm-kernel@lists.infradead.org, michal.simek@xilinx.com
Subject: [PATCH v25 1/5] firmware: xilinx: Add ZynqMP firmware ioctl enums for RPU configuration.
Date: Sun, 10 Jan 2021 18:02:46 -0800	[thread overview]
Message-ID: <20210111020250.6846-2-ben.levinsky@xilinx.com> (raw)
In-Reply-To: <20210111020250.6846-1-ben.levinsky@xilinx.com>

Add ZynqMP firmware ioctl enums for RPU configuration and TCM Nodes for
later use via request_node and release_node

Signed-off-by: Ben Levinsky <ben.levinsky@xilinx.com>
---
v25:
- update include/linux/firmware/xlnx-zynqmp.h style to match for enum
---
 include/linux/firmware/xlnx-zynqmp.h | 23 +++++++++++++++++++++++
 1 file changed, 23 insertions(+)

diff --git a/include/linux/firmware/xlnx-zynqmp.h b/include/linux/firmware/xlnx-zynqmp.h
index 5968df82b991..e4044cae0713 100644
--- a/include/linux/firmware/xlnx-zynqmp.h
+++ b/include/linux/firmware/xlnx-zynqmp.h
@@ -104,6 +104,10 @@ enum pm_ret_status {
 };
 
 enum pm_ioctl_id {
+	IOCTL_GET_RPU_OPER_MODE = 0,
+	IOCTL_SET_RPU_OPER_MODE = 1,
+	IOCTL_RPU_BOOT_ADDR_CONFIG = 2,
+	IOCTL_TCM_COMB_CONFIG = 3,
 	IOCTL_SD_DLL_RESET = 6,
 	IOCTL_SET_SD_TAPDELAY,
 	IOCTL_SET_PLL_FRAC_MODE,
@@ -129,6 +133,21 @@ enum pm_query_id {
 	PM_QID_CLOCK_GET_MAX_DIVISOR,
 };
 
+enum rpu_oper_mode {
+	PM_RPU_MODE_LOCKSTEP = 0,
+	PM_RPU_MODE_SPLIT = 1,
+};
+
+enum rpu_boot_mem {
+	PM_RPU_BOOTMEM_LOVEC = 0,
+	PM_RPU_BOOTMEM_HIVEC = 1,
+};
+
+enum rpu_tcm_comb {
+	PM_RPU_TCM_SPLIT = 0,
+	PM_RPU_TCM_COMB = 1,
+};
+
 enum zynqmp_pm_reset_action {
 	PM_RESET_ACTION_RELEASE,
 	PM_RESET_ACTION_ASSERT,
@@ -273,6 +292,10 @@ enum zynqmp_pm_request_ack {
 };
 
 enum pm_node_id {
+	NODE_TCM_0_A = 15,
+	NODE_TCM_0_B,
+	NODE_TCM_1_A,
+	NODE_TCM_1_B,
 	NODE_SD_0 = 39,
 	NODE_SD_1,
 };
-- 
2.17.1


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

  reply	other threads:[~2021-01-11  2:04 UTC|newest]

Thread overview: 28+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2021-01-11  2:02 [PATCH v25 0/5] Provide basic driver to control Arm R5 co-processor found on Xilinx ZynqMP Ben Levinsky
2021-01-11  2:02 ` Ben Levinsky
2021-01-11  2:02 ` Ben Levinsky [this message]
2021-01-11  2:02   ` [PATCH v25 1/5] firmware: xilinx: Add ZynqMP firmware ioctl enums for RPU configuration Ben Levinsky
2021-01-11  2:02 ` [PATCH v25 2/5] firmware: xilinx: Add shutdown/wakeup APIs Ben Levinsky
2021-01-11  2:02   ` Ben Levinsky
2021-01-11  2:02 ` [PATCH v25 3/5] firmware: xilinx: Add RPU configuration APIs Ben Levinsky
2021-01-11  2:02   ` Ben Levinsky
2021-01-11  2:02 ` [PATCH v25 4/5] dt-bindings: remoteproc: Add documentation for ZynqMP R5 rproc bindings Ben Levinsky
2021-01-11  2:02   ` Ben Levinsky
2021-01-11  2:02 ` [PATCH v25 5/5] remoteproc: Add initial zynqmp R5 remoteproc driver Ben Levinsky
2021-01-11  2:02   ` Ben Levinsky
2021-02-15 18:51   ` Mathieu Poirier
2021-02-15 18:51     ` Mathieu Poirier
2021-02-16 18:48   ` Mathieu Poirier
2021-02-16 18:48     ` Mathieu Poirier
2021-02-17 16:47     ` Ben Levinsky
2021-02-17 16:47       ` Ben Levinsky
2021-02-17 19:11       ` Ben Levinsky
2021-02-17 19:11         ` Ben Levinsky
2021-02-17 21:34         ` Ben Levinsky
2021-02-17 21:34           ` Ben Levinsky
2021-02-17 21:58           ` Mathieu Poirier
2021-02-17 21:58             ` Mathieu Poirier
2021-02-17 21:50         ` Mathieu Poirier
2021-02-17 21:50           ` Mathieu Poirier
2021-02-04 15:20 ` [PATCH v25 0/5] Provide basic driver to control Arm R5 co-processor found on Xilinx ZynqMP Ben Levinsky
2021-02-04 17:04   ` Mathieu Poirier

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20210111020250.6846-2-ben.levinsky@xilinx.com \
    --to=ben.levinsky@xilinx.com \
    --cc=devicetree@vger.kernel.org \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-remoteproc@vger.kernel.org \
    --cc=mathieu.poirier@linaro.org \
    --cc=michal.simek@xilinx.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body. 
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.