From: Jernej Skrabec <jernej.skrabec@siol.net>
To: u-boot@lists.denx.de
Subject: [PATCH v2 00/21] sunxi: Introduce H616 support
Date: Mon, 11 Jan 2021 21:11:32 +0100 [thread overview]
Message-ID: <20210111201153.1800440-1-jernej.skrabec@siol.net> (raw)
This series introduces H616 support. Later patches add also OrangePi
Zero2 support but since H616 DT is not merged into Linux yet, I don't
expect them to land yet.
Most patches are ready to land, except those which depends on non-upstreamed
DT yet.
This series is based on u-boot-sunxi repo.
Please take a look.
Best regards,
Jernej
Changes from v1:
- collected tags
- replaced AXP805 magic value with macro
- fixed H6 build (missing symbols after refactoring)
- removed premature SPI boot support
- add missing peripherals to prcm map
- reworked mmc sector calculation
- fixed comment in clock function
- used IS_ENABLED ternary instead of #if #else #endif
- renamed DRAM struct field to more meaningful name
- fixed missing space in Kconfig for DRAM symbol
- removed unused macro from sunxi-u-boot.dtsi
- removed padding definition for H616
- added FEL support for H616
- picked patches 1-2 from https://patchwork.ozlabs.org/project/uboot/list/?series=223600
- added mmc support for H616
Andre Przywara (4):
sunxi: support loading with SPL > 32KB
mmc: sunxi: Refactor mod clock register offset
net: sun8i-emac: Always clear syscon EPHY register
net: sun8i-emac: Determine pinmux based on SoC, not EMAC type
Jernej Skrabec (17):
sunxi: Add support for AXP305 PMIC
sunxi: Introduce common symbol for H6 like SoCs
mmc: sunxi: Replace H6 ifdefs with H6 gen macro
i2c: mvtwsi: sunxi: update macro
sunxi: prcm: Add memory map for H6 like SoCs
sunxi: Add support for I2C on H6 like SoCs
sunxi: introduce support for H616 clocks
sunxi: add support for H616 uart0
sunxi: add support for R_I2C on H616
sunxi: Add H616 DRAM support
sunxi: Add support for H616 SoC
mmc: sunxi: Add H616 clock offset
sunxi: Add H616 FEL support
arm: sunxi: add initial H616 DTSI and headers
sunxi: gpio: introduce compatible for H616
clk: sunxi: Add support for H616 clocks
sunxi: Add support for OrangePi Zero2
arch/arm/cpu/armv8/fel_utils.S | 5 +-
arch/arm/dts/Makefile | 2 +
arch/arm/dts/sun50i-h616-orangepi-zero2.dts | 240 ++++
arch/arm/dts/sun50i-h616.dtsi | 716 ++++++++++++
arch/arm/dts/sunxi-u-boot.dtsi | 8 +
arch/arm/include/asm/arch-sunxi/boot0.h | 2 +-
arch/arm/include/asm/arch-sunxi/clock.h | 2 +-
.../include/asm/arch-sunxi/clock_sun50i_h6.h | 19 +-
arch/arm/include/asm/arch-sunxi/cpu.h | 2 +-
.../include/asm/arch-sunxi/cpu_sun50i_h6.h | 7 +
arch/arm/include/asm/arch-sunxi/dram.h | 2 +
.../include/asm/arch-sunxi/dram_sun50i_h616.h | 159 +++
arch/arm/include/asm/arch-sunxi/gpio.h | 2 +
arch/arm/include/asm/arch-sunxi/mmc.h | 2 +-
arch/arm/include/asm/arch-sunxi/prcm.h | 249 +---
arch/arm/include/asm/arch-sunxi/prcm_sun50i.h | 47 +
arch/arm/include/asm/arch-sunxi/prcm_sun6i.h | 247 ++++
arch/arm/include/asm/arch-sunxi/timer.h | 2 +-
arch/arm/mach-sunxi/Kconfig | 75 +-
arch/arm/mach-sunxi/Makefile | 4 +-
arch/arm/mach-sunxi/board.c | 24 +-
arch/arm/mach-sunxi/clock_sun50i_h6.c | 37 +-
arch/arm/mach-sunxi/cpu_info.c | 2 +
arch/arm/mach-sunxi/dram_sun50i_h616.c | 1023 +++++++++++++++++
arch/arm/mach-sunxi/dram_timings/Makefile | 2 +
.../mach-sunxi/dram_timings/h616_ddr3_1333.c | 94 ++
arch/arm/mach-sunxi/pmic_bus.c | 6 +
arch/arm/mach-sunxi/rmr_switch.S | 2 +-
board/sunxi/MAINTAINERS | 5 +
board/sunxi/board.c | 14 +-
common/spl/Kconfig | 7 +-
configs/orangepi_zero2_defconfig | 15 +
drivers/clk/sunxi/Kconfig | 7 +
drivers/clk/sunxi/Makefile | 1 +
drivers/clk/sunxi/clk_h616.c | 120 ++
drivers/gpio/sunxi_gpio.c | 1 +
drivers/i2c/mvtwsi.c | 2 +-
drivers/mmc/sunxi_mmc.c | 97 +-
drivers/net/sun8i_emac.c | 59 +-
drivers/power/Kconfig | 14 +-
drivers/power/Makefile | 1 +
drivers/power/axp305.c | 83 ++
include/axp305.h | 17 +
include/axp_pmic.h | 3 +
include/configs/sun50i.h | 2 +-
include/configs/sunxi-common.h | 7 +
include/dt-bindings/clock/sun50i-h616-ccu.h | 115 ++
include/dt-bindings/reset/sun50i-h616-ccu.h | 70 ++
48 files changed, 3258 insertions(+), 364 deletions(-)
create mode 100644 arch/arm/dts/sun50i-h616-orangepi-zero2.dts
create mode 100644 arch/arm/dts/sun50i-h616.dtsi
create mode 100644 arch/arm/include/asm/arch-sunxi/dram_sun50i_h616.h
create mode 100644 arch/arm/include/asm/arch-sunxi/prcm_sun50i.h
create mode 100644 arch/arm/include/asm/arch-sunxi/prcm_sun6i.h
create mode 100644 arch/arm/mach-sunxi/dram_sun50i_h616.c
create mode 100644 arch/arm/mach-sunxi/dram_timings/h616_ddr3_1333.c
create mode 100644 configs/orangepi_zero2_defconfig
create mode 100644 drivers/clk/sunxi/clk_h616.c
create mode 100644 drivers/power/axp305.c
create mode 100644 include/axp305.h
create mode 100644 include/dt-bindings/clock/sun50i-h616-ccu.h
create mode 100644 include/dt-bindings/reset/sun50i-h616-ccu.h
--
2.30.0
next reply other threads:[~2021-01-11 20:11 UTC|newest]
Thread overview: 45+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-01-11 20:11 Jernej Skrabec [this message]
2021-01-11 20:11 ` [PATCH v2 01/21] sunxi: Add support for AXP305 PMIC Jernej Skrabec
2021-01-11 20:11 ` [PATCH v2 02/21] sunxi: Introduce common symbol for H6 like SoCs Jernej Skrabec
2021-01-12 2:04 ` [linux-sunxi] " Samuel Holland
2021-01-22 1:13 ` Andre Przywara
2021-01-11 20:11 ` [PATCH v2 03/21] mmc: sunxi: Replace H6 ifdefs with H6 gen macro Jernej Skrabec
2021-01-11 22:18 ` Jaehoon Chung
2021-01-11 20:11 ` [PATCH v2 04/21] i2c: mvtwsi: sunxi: update macro Jernej Skrabec
2021-01-11 20:11 ` [PATCH v2 05/21] sunxi: prcm: Add memory map for H6 like SoCs Jernej Skrabec
2021-01-12 2:05 ` [linux-sunxi] " Samuel Holland
2021-01-22 1:14 ` Andre Przywara
2021-01-22 1:43 ` [linux-sunxi] " Samuel Holland
2021-01-11 20:11 ` [PATCH v2 06/21] sunxi: Add support for I2C on " Jernej Skrabec
2021-01-22 1:16 ` Andre Przywara
2021-01-11 20:11 ` [PATCH v2 07/21] sunxi: support loading with SPL > 32KB Jernej Skrabec
2021-01-12 3:36 ` [linux-sunxi] " Samuel Holland
2021-01-11 20:11 ` [PATCH v2 08/21] sunxi: introduce support for H616 clocks Jernej Skrabec
2021-01-22 1:17 ` Andre Przywara
2021-01-22 6:21 ` Jernej Škrabec
2021-01-11 20:11 ` [PATCH v2 09/21] sunxi: add support for H616 uart0 Jernej Skrabec
2021-01-22 1:17 ` Andre Przywara
2021-01-11 20:11 ` [PATCH v2 10/21] sunxi: add support for R_I2C on H616 Jernej Skrabec
2021-01-22 1:18 ` Andre Przywara
2021-01-11 20:11 ` [PATCH v2 11/21] sunxi: Add H616 DRAM support Jernej Skrabec
2021-01-22 18:06 ` Andre Przywara
2021-01-11 20:11 ` [PATCH v2 12/21] mmc: sunxi: Refactor mod clock register offset Jernej Skrabec
2021-01-11 20:11 ` [PATCH v2 13/21] net: sun8i-emac: Always clear syscon EPHY register Jernej Skrabec
2021-01-11 20:11 ` [PATCH v2 14/21] sunxi: Add support for H616 SoC Jernej Skrabec
2021-01-23 1:57 ` Andre Przywara
2021-01-11 20:11 ` [PATCH v2 15/21] mmc: sunxi: Add H616 clock offset Jernej Skrabec
2021-01-11 22:18 ` Jaehoon Chung
2021-01-23 1:58 ` Andre Przywara
2021-01-11 20:11 ` [PATCH v2 16/21] sunxi: Add H616 FEL support Jernej Skrabec
2021-01-20 5:46 ` Samuel Holland
2021-01-23 2:00 ` Andre Przywara
2021-01-11 20:11 ` [PATCH v2 17/21] net: sun8i-emac: Determine pinmux based on SoC, not EMAC type Jernej Skrabec
2021-01-11 20:11 ` [PATCH v2 18/21] arm: sunxi: add initial H616 DTSI and headers Jernej Skrabec
2021-01-24 2:17 ` Andre Przywara
2021-01-11 20:11 ` [PATCH v2 19/21] sunxi: gpio: introduce compatible for H616 Jernej Skrabec
2021-01-11 20:11 ` [PATCH v2 20/21] clk: sunxi: Add support for H616 clocks Jernej Skrabec
2021-01-24 2:17 ` Andre Przywara
2021-01-11 20:11 ` [PATCH v2 21/21] sunxi: Add support for OrangePi Zero2 Jernej Skrabec
2021-01-24 2:18 ` Andre Przywara
2021-01-11 20:17 ` [PATCH v2 00/21] sunxi: Introduce H616 support Jernej Škrabec
2021-01-24 2:19 ` Andre Przywara
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20210111201153.1800440-1-jernej.skrabec@siol.net \
--to=jernej.skrabec@siol.net \
--cc=u-boot@lists.denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.