All of lore.kernel.org
 help / color / mirror / Atom feed
From: Jernej Skrabec <jernej.skrabec@siol.net>
To: u-boot@lists.denx.de
Subject: [PATCH v2 13/21] net: sun8i-emac: Always clear syscon EPHY register
Date: Mon, 11 Jan 2021 21:11:45 +0100	[thread overview]
Message-ID: <20210111201153.1800440-14-jernej.skrabec@siol.net> (raw)
In-Reply-To: <20210111201153.1800440-1-jernej.skrabec@siol.net>

From: Andre Przywara <andre.przywara@arm.com>

At the moment we only consider the EPHY register for those SoCs were
we actually have an internal PHY to configure. However even other SoCs
have this register, an expect a bit to be cleared for proper operation
with an external PHY.

Rework sun8i_emac_set_syscon_ephy() to be called regardless of the EMAC
model, and clear the H3_EPHY_SELECT bit if no internal PHY is used.

This helps with the upcoming H616 support, were we need to consider two
EMACs.

Signed-off-by: Andre Przywara <andre.przywara@arm.com>
---
 drivers/net/sun8i_emac.c | 31 +++++++++++++------------------
 1 file changed, 13 insertions(+), 18 deletions(-)

diff --git a/drivers/net/sun8i_emac.c b/drivers/net/sun8i_emac.c
index 4524604126c9..e0bf19e34c17 100644
--- a/drivers/net/sun8i_emac.c
+++ b/drivers/net/sun8i_emac.c
@@ -297,30 +297,29 @@ static void sun8i_adjust_link(struct emac_eth_dev *priv,
 	writel(v, priv->mac_reg + EMAC_CTL0);
 }
 
-static int sun8i_emac_set_syscon_ephy(struct emac_eth_dev *priv, u32 *reg)
+static u32 sun8i_emac_set_syscon_ephy(struct emac_eth_dev *priv, u32 reg)
 {
 	if (priv->use_internal_phy) {
 		/* H3 based SoC's that has an Internal 100MBit PHY
 		 * needs to be configured and powered up before use
 		*/
-		*reg &= ~H3_EPHY_DEFAULT_MASK;
-		*reg |=  H3_EPHY_DEFAULT_VALUE;
-		*reg |= priv->phyaddr << H3_EPHY_ADDR_SHIFT;
-		*reg &= ~H3_EPHY_SHUTDOWN;
-		*reg |= H3_EPHY_SELECT;
-	} else
-		/* This is to select External Gigabit PHY on
-		 * the boards with H3 SoC.
-		*/
-		*reg &= ~H3_EPHY_SELECT;
+		reg &= ~H3_EPHY_DEFAULT_MASK;
+		reg |=  H3_EPHY_DEFAULT_VALUE;
+		reg |= priv->phyaddr << H3_EPHY_ADDR_SHIFT;
+		reg &= ~H3_EPHY_SHUTDOWN;
+		return reg | H3_EPHY_SELECT;
+	}
 
-	return 0;
+	/* This is to select External Gigabit PHY on those boards with
+	 * an internal PHY. Does not hurt on other SoCs. Linux does
+	 * it as well.
+	 */
+	return reg & ~H3_EPHY_SELECT;
 }
 
 static int sun8i_emac_set_syscon(struct sun8i_eth_pdata *pdata,
 				 struct emac_eth_dev *priv)
 {
-	int ret;
 	u32 reg;
 
 	if (priv->variant == R40_GMAC) {
@@ -336,11 +335,7 @@ static int sun8i_emac_set_syscon(struct sun8i_eth_pdata *pdata,
 
 	reg = readl(priv->sysctl_reg + 0x30);
 
-	if (priv->variant == H3_EMAC || priv->variant == H6_EMAC) {
-		ret = sun8i_emac_set_syscon_ephy(priv, &reg);
-		if (ret)
-			return ret;
-	}
+	reg = sun8i_emac_set_syscon_ephy(priv, reg);
 
 	reg &= ~(SC_ETCS_MASK | SC_EPIT);
 	if (priv->variant == H3_EMAC ||
-- 
2.30.0

  parent reply	other threads:[~2021-01-11 20:11 UTC|newest]

Thread overview: 45+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2021-01-11 20:11 [PATCH v2 00/21] sunxi: Introduce H616 support Jernej Skrabec
2021-01-11 20:11 ` [PATCH v2 01/21] sunxi: Add support for AXP305 PMIC Jernej Skrabec
2021-01-11 20:11 ` [PATCH v2 02/21] sunxi: Introduce common symbol for H6 like SoCs Jernej Skrabec
2021-01-12  2:04   ` [linux-sunxi] " Samuel Holland
2021-01-22  1:13   ` Andre Przywara
2021-01-11 20:11 ` [PATCH v2 03/21] mmc: sunxi: Replace H6 ifdefs with H6 gen macro Jernej Skrabec
2021-01-11 22:18   ` Jaehoon Chung
2021-01-11 20:11 ` [PATCH v2 04/21] i2c: mvtwsi: sunxi: update macro Jernej Skrabec
2021-01-11 20:11 ` [PATCH v2 05/21] sunxi: prcm: Add memory map for H6 like SoCs Jernej Skrabec
2021-01-12  2:05   ` [linux-sunxi] " Samuel Holland
2021-01-22  1:14   ` Andre Przywara
2021-01-22  1:43     ` [linux-sunxi] " Samuel Holland
2021-01-11 20:11 ` [PATCH v2 06/21] sunxi: Add support for I2C on " Jernej Skrabec
2021-01-22  1:16   ` Andre Przywara
2021-01-11 20:11 ` [PATCH v2 07/21] sunxi: support loading with SPL > 32KB Jernej Skrabec
2021-01-12  3:36   ` [linux-sunxi] " Samuel Holland
2021-01-11 20:11 ` [PATCH v2 08/21] sunxi: introduce support for H616 clocks Jernej Skrabec
2021-01-22  1:17   ` Andre Przywara
2021-01-22  6:21     ` Jernej Škrabec
2021-01-11 20:11 ` [PATCH v2 09/21] sunxi: add support for H616 uart0 Jernej Skrabec
2021-01-22  1:17   ` Andre Przywara
2021-01-11 20:11 ` [PATCH v2 10/21] sunxi: add support for R_I2C on H616 Jernej Skrabec
2021-01-22  1:18   ` Andre Przywara
2021-01-11 20:11 ` [PATCH v2 11/21] sunxi: Add H616 DRAM support Jernej Skrabec
2021-01-22 18:06   ` Andre Przywara
2021-01-11 20:11 ` [PATCH v2 12/21] mmc: sunxi: Refactor mod clock register offset Jernej Skrabec
2021-01-11 20:11 ` Jernej Skrabec [this message]
2021-01-11 20:11 ` [PATCH v2 14/21] sunxi: Add support for H616 SoC Jernej Skrabec
2021-01-23  1:57   ` Andre Przywara
2021-01-11 20:11 ` [PATCH v2 15/21] mmc: sunxi: Add H616 clock offset Jernej Skrabec
2021-01-11 22:18   ` Jaehoon Chung
2021-01-23  1:58   ` Andre Przywara
2021-01-11 20:11 ` [PATCH v2 16/21] sunxi: Add H616 FEL support Jernej Skrabec
2021-01-20  5:46   ` Samuel Holland
2021-01-23  2:00   ` Andre Przywara
2021-01-11 20:11 ` [PATCH v2 17/21] net: sun8i-emac: Determine pinmux based on SoC, not EMAC type Jernej Skrabec
2021-01-11 20:11 ` [PATCH v2 18/21] arm: sunxi: add initial H616 DTSI and headers Jernej Skrabec
2021-01-24  2:17   ` Andre Przywara
2021-01-11 20:11 ` [PATCH v2 19/21] sunxi: gpio: introduce compatible for H616 Jernej Skrabec
2021-01-11 20:11 ` [PATCH v2 20/21] clk: sunxi: Add support for H616 clocks Jernej Skrabec
2021-01-24  2:17   ` Andre Przywara
2021-01-11 20:11 ` [PATCH v2 21/21] sunxi: Add support for OrangePi Zero2 Jernej Skrabec
2021-01-24  2:18   ` Andre Przywara
2021-01-11 20:17 ` [PATCH v2 00/21] sunxi: Introduce H616 support Jernej Škrabec
2021-01-24  2:19 ` Andre Przywara

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20210111201153.1800440-14-jernej.skrabec@siol.net \
    --to=jernej.skrabec@siol.net \
    --cc=u-boot@lists.denx.de \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.