From: KuoHsiang Chou <kuohsiang_chou@aspeedtech.com> To: <tzimmermann@suse.de>, <dri-devel@lists.freedesktop.org>, <linux-kernel@vger.kernel.org> Cc: <airlied@redhat.com>, <airlied@linux.ie>, <daniel@ffwll.ch>, <jenmin_yuan@aspeedtech.com>, <kuohsiang_chou@aspeedtech.com>, <arc_sung@aspeedtech.com>, <tommy_huang@aspeedtech.com> Subject: [PATCH v2] drm/ast: Disable fast reset after DRAM initial Date: Tue, 12 Jan 2021 15:58:11 +0800 [thread overview] Message-ID: <20210112075811.9354-1-kuohsiang_chou@aspeedtech.com> (raw) In-Reply-To: <88f197b6-4df8-76ca-ec31-7f8f739f161e@suse.de> [Bug][AST2500] V1: When AST2500 acts as stand-alone VGA so that DRAM and DVO initialization have to be achieved by VGA driver with P2A (PCI to AHB) enabling. However, HW suggests disable Fast reset mode after DRAM initializaton, because fast reset mode is mainly designed for ARM ICE debugger. Once Fast reset is checked as enabling, WDT (Watch Dog Timer) should be first enabled to avoid system deadlock before disable fast reset mode. V2: Use to_pci_dev() to get revision of PCI configuration. Signed-off-by: KuoHsiang Chou <kuohsiang_chou@aspeedtech.com> --- drivers/gpu/drm/ast/ast_drv.h | 1 + drivers/gpu/drm/ast/ast_main.c | 5 +++ drivers/gpu/drm/ast/ast_post.c | 71 +++++++++++++++++++++------------- 3 files changed, 51 insertions(+), 26 deletions(-) diff --git a/drivers/gpu/drm/ast/ast_drv.h b/drivers/gpu/drm/ast/ast_drv.h index da6dfb677540..a2cf5fef2399 100644 --- a/drivers/gpu/drm/ast/ast_drv.h +++ b/drivers/gpu/drm/ast/ast_drv.h @@ -320,6 +320,7 @@ bool ast_is_vga_enabled(struct drm_device *dev); void ast_post_gpu(struct drm_device *dev); u32 ast_mindwm(struct ast_private *ast, u32 r); void ast_moutdwm(struct ast_private *ast, u32 r, u32 v); +void ast_patch_ahb_2500(struct ast_private *ast); /* ast dp501 */ void ast_set_dp501_video_output(struct drm_device *dev, u8 mode); bool ast_backup_fw(struct drm_device *dev, u8 *addr, u32 size); diff --git a/drivers/gpu/drm/ast/ast_main.c b/drivers/gpu/drm/ast/ast_main.c index 3775fe26f792..0e4dfcc25623 100644 --- a/drivers/gpu/drm/ast/ast_main.c +++ b/drivers/gpu/drm/ast/ast_main.c @@ -69,6 +69,7 @@ static void ast_detect_config_mode(struct drm_device *dev, u32 *scu_rev) { struct device_node *np = dev->pdev->dev.of_node; struct ast_private *ast = to_ast_private(dev); + struct pci_dev *pdev = to_pci_dev(dev->dev); uint32_t data, jregd0, jregd1; /* Defaults */ @@ -96,6 +97,10 @@ static void ast_detect_config_mode(struct drm_device *dev, u32 *scu_rev) jregd0 = ast_get_index_reg_mask(ast, AST_IO_CRTC_PORT, 0xd0, 0xff); jregd1 = ast_get_index_reg_mask(ast, AST_IO_CRTC_PORT, 0xd1, 0xff); if (!(jregd0 & 0x80) || !(jregd1 & 0x10)) { + /* Patch AST2500 */ + if (((pdev->revision & 0xF0) == 0x40) && ((jregd0 & 0xC0) == 0)) + ast_patch_ahb_2500(ast); + /* Double check it's actually working */ data = ast_read32(ast, 0xf004); if (data != 0xFFFFFFFF) { diff --git a/drivers/gpu/drm/ast/ast_post.c b/drivers/gpu/drm/ast/ast_post.c index 8902c2f84bf9..1f0007daa005 100644 --- a/drivers/gpu/drm/ast/ast_post.c +++ b/drivers/gpu/drm/ast/ast_post.c @@ -2026,6 +2026,33 @@ static bool ast_dram_init_2500(struct ast_private *ast) return true; } +void ast_patch_ahb_2500(struct ast_private *ast) +{ + u32 data; + +patch_ahb_lock: + /* Clear bus lock condition */ + ast_moutdwm(ast, 0x1e600000, 0xAEED1A03); + ast_moutdwm(ast, 0x1e600084, 0x00010000); + ast_moutdwm(ast, 0x1e600088, 0x00000000); + ast_moutdwm(ast, 0x1e6e2000, 0x1688A8A8); + data = ast_mindwm(ast, 0x1e6e2070); + if (data & 0x08000000) { /* check fast reset */ + + ast_moutdwm(ast, 0x1E785004, 0x00000010); + ast_moutdwm(ast, 0x1E785008, 0x00004755); + ast_moutdwm(ast, 0x1E78500c, 0x00000033); + udelay(1000); + } + ast_moutdwm(ast, 0x1e6e2000, 0x1688A8A8); + do { + data = ast_mindwm(ast, 0x1e6e2000); + if (data == 0xffffffff) + goto patch_ahb_lock; + } while (data != 1); + ast_moutdwm(ast, 0x1e6e207c, 0x08000000); /* clear fast reset */ +} + void ast_post_chip_2500(struct drm_device *dev) { struct ast_private *ast = to_ast_private(dev); @@ -2033,39 +2060,31 @@ void ast_post_chip_2500(struct drm_device *dev) u8 reg; reg = ast_get_index_reg_mask(ast, AST_IO_CRTC_PORT, 0xd0, 0xff); - if ((reg & 0x80) == 0) {/* vga only */ + if ((reg & 0xC0) == 0) {/* vga only */ /* Clear bus lock condition */ - ast_moutdwm(ast, 0x1e600000, 0xAEED1A03); - ast_moutdwm(ast, 0x1e600084, 0x00010000); - ast_moutdwm(ast, 0x1e600088, 0x00000000); - ast_moutdwm(ast, 0x1e6e2000, 0x1688A8A8); - ast_write32(ast, 0xf004, 0x1e6e0000); - ast_write32(ast, 0xf000, 0x1); - ast_write32(ast, 0x12000, 0x1688a8a8); - while (ast_read32(ast, 0x12000) != 0x1) - ; - - ast_write32(ast, 0x10000, 0xfc600309); - while (ast_read32(ast, 0x10000) != 0x1) - ; + ast_patch_ahb_2500(ast); + + /* Disable watchdog */ + ast_moutdwm(ast, 0x1E78502C, 0x00000000); + ast_moutdwm(ast, 0x1E78504C, 0x00000000); + /* Reset USB port */ + ast_moutdwm(ast, 0x1E6E2090, 0x20000000); + ast_moutdwm(ast, 0x1E6E2094, 0x00004000); + if (ast_mindwm(ast, 0x1E6E2070) & 0x00800000) { + ast_moutdwm(ast, 0x1E6E207C, 0x00800000); + mdelay(100); + ast_moutdwm(ast, 0x1E6E2070, 0x00800000); + } + /* Modify eSPI reset pin */ + temp = ast_mindwm(ast, 0x1E6E2070); + if (temp & 0x02000000) + ast_moutdwm(ast, 0x1E6E207C, 0x00004000); /* Slow down CPU/AHB CLK in VGA only mode */ temp = ast_read32(ast, 0x12008); temp |= 0x73; ast_write32(ast, 0x12008, temp); - /* Reset USB port to patch USB unknown device issue */ - ast_moutdwm(ast, 0x1e6e2090, 0x20000000); - temp = ast_mindwm(ast, 0x1e6e2094); - temp |= 0x00004000; - ast_moutdwm(ast, 0x1e6e2094, temp); - temp = ast_mindwm(ast, 0x1e6e2070); - if (temp & 0x00800000) { - ast_moutdwm(ast, 0x1e6e207c, 0x00800000); - mdelay(100); - ast_moutdwm(ast, 0x1e6e2070, 0x00800000); - } - if (!ast_dram_init_2500(ast)) drm_err(dev, "DRAM init failed !\n"); -- 2.18.4
WARNING: multiple messages have this Message-ID (diff)
From: KuoHsiang Chou <kuohsiang_chou@aspeedtech.com> To: <tzimmermann@suse.de>, <dri-devel@lists.freedesktop.org>, <linux-kernel@vger.kernel.org> Cc: airlied@linux.ie, tommy_huang@aspeedtech.com, jenmin_yuan@aspeedtech.com, airlied@redhat.com, arc_sung@aspeedtech.com Subject: [PATCH v2] drm/ast: Disable fast reset after DRAM initial Date: Tue, 12 Jan 2021 15:58:11 +0800 [thread overview] Message-ID: <20210112075811.9354-1-kuohsiang_chou@aspeedtech.com> (raw) In-Reply-To: <88f197b6-4df8-76ca-ec31-7f8f739f161e@suse.de> [Bug][AST2500] V1: When AST2500 acts as stand-alone VGA so that DRAM and DVO initialization have to be achieved by VGA driver with P2A (PCI to AHB) enabling. However, HW suggests disable Fast reset mode after DRAM initializaton, because fast reset mode is mainly designed for ARM ICE debugger. Once Fast reset is checked as enabling, WDT (Watch Dog Timer) should be first enabled to avoid system deadlock before disable fast reset mode. V2: Use to_pci_dev() to get revision of PCI configuration. Signed-off-by: KuoHsiang Chou <kuohsiang_chou@aspeedtech.com> --- drivers/gpu/drm/ast/ast_drv.h | 1 + drivers/gpu/drm/ast/ast_main.c | 5 +++ drivers/gpu/drm/ast/ast_post.c | 71 +++++++++++++++++++++------------- 3 files changed, 51 insertions(+), 26 deletions(-) diff --git a/drivers/gpu/drm/ast/ast_drv.h b/drivers/gpu/drm/ast/ast_drv.h index da6dfb677540..a2cf5fef2399 100644 --- a/drivers/gpu/drm/ast/ast_drv.h +++ b/drivers/gpu/drm/ast/ast_drv.h @@ -320,6 +320,7 @@ bool ast_is_vga_enabled(struct drm_device *dev); void ast_post_gpu(struct drm_device *dev); u32 ast_mindwm(struct ast_private *ast, u32 r); void ast_moutdwm(struct ast_private *ast, u32 r, u32 v); +void ast_patch_ahb_2500(struct ast_private *ast); /* ast dp501 */ void ast_set_dp501_video_output(struct drm_device *dev, u8 mode); bool ast_backup_fw(struct drm_device *dev, u8 *addr, u32 size); diff --git a/drivers/gpu/drm/ast/ast_main.c b/drivers/gpu/drm/ast/ast_main.c index 3775fe26f792..0e4dfcc25623 100644 --- a/drivers/gpu/drm/ast/ast_main.c +++ b/drivers/gpu/drm/ast/ast_main.c @@ -69,6 +69,7 @@ static void ast_detect_config_mode(struct drm_device *dev, u32 *scu_rev) { struct device_node *np = dev->pdev->dev.of_node; struct ast_private *ast = to_ast_private(dev); + struct pci_dev *pdev = to_pci_dev(dev->dev); uint32_t data, jregd0, jregd1; /* Defaults */ @@ -96,6 +97,10 @@ static void ast_detect_config_mode(struct drm_device *dev, u32 *scu_rev) jregd0 = ast_get_index_reg_mask(ast, AST_IO_CRTC_PORT, 0xd0, 0xff); jregd1 = ast_get_index_reg_mask(ast, AST_IO_CRTC_PORT, 0xd1, 0xff); if (!(jregd0 & 0x80) || !(jregd1 & 0x10)) { + /* Patch AST2500 */ + if (((pdev->revision & 0xF0) == 0x40) && ((jregd0 & 0xC0) == 0)) + ast_patch_ahb_2500(ast); + /* Double check it's actually working */ data = ast_read32(ast, 0xf004); if (data != 0xFFFFFFFF) { diff --git a/drivers/gpu/drm/ast/ast_post.c b/drivers/gpu/drm/ast/ast_post.c index 8902c2f84bf9..1f0007daa005 100644 --- a/drivers/gpu/drm/ast/ast_post.c +++ b/drivers/gpu/drm/ast/ast_post.c @@ -2026,6 +2026,33 @@ static bool ast_dram_init_2500(struct ast_private *ast) return true; } +void ast_patch_ahb_2500(struct ast_private *ast) +{ + u32 data; + +patch_ahb_lock: + /* Clear bus lock condition */ + ast_moutdwm(ast, 0x1e600000, 0xAEED1A03); + ast_moutdwm(ast, 0x1e600084, 0x00010000); + ast_moutdwm(ast, 0x1e600088, 0x00000000); + ast_moutdwm(ast, 0x1e6e2000, 0x1688A8A8); + data = ast_mindwm(ast, 0x1e6e2070); + if (data & 0x08000000) { /* check fast reset */ + + ast_moutdwm(ast, 0x1E785004, 0x00000010); + ast_moutdwm(ast, 0x1E785008, 0x00004755); + ast_moutdwm(ast, 0x1E78500c, 0x00000033); + udelay(1000); + } + ast_moutdwm(ast, 0x1e6e2000, 0x1688A8A8); + do { + data = ast_mindwm(ast, 0x1e6e2000); + if (data == 0xffffffff) + goto patch_ahb_lock; + } while (data != 1); + ast_moutdwm(ast, 0x1e6e207c, 0x08000000); /* clear fast reset */ +} + void ast_post_chip_2500(struct drm_device *dev) { struct ast_private *ast = to_ast_private(dev); @@ -2033,39 +2060,31 @@ void ast_post_chip_2500(struct drm_device *dev) u8 reg; reg = ast_get_index_reg_mask(ast, AST_IO_CRTC_PORT, 0xd0, 0xff); - if ((reg & 0x80) == 0) {/* vga only */ + if ((reg & 0xC0) == 0) {/* vga only */ /* Clear bus lock condition */ - ast_moutdwm(ast, 0x1e600000, 0xAEED1A03); - ast_moutdwm(ast, 0x1e600084, 0x00010000); - ast_moutdwm(ast, 0x1e600088, 0x00000000); - ast_moutdwm(ast, 0x1e6e2000, 0x1688A8A8); - ast_write32(ast, 0xf004, 0x1e6e0000); - ast_write32(ast, 0xf000, 0x1); - ast_write32(ast, 0x12000, 0x1688a8a8); - while (ast_read32(ast, 0x12000) != 0x1) - ; - - ast_write32(ast, 0x10000, 0xfc600309); - while (ast_read32(ast, 0x10000) != 0x1) - ; + ast_patch_ahb_2500(ast); + + /* Disable watchdog */ + ast_moutdwm(ast, 0x1E78502C, 0x00000000); + ast_moutdwm(ast, 0x1E78504C, 0x00000000); + /* Reset USB port */ + ast_moutdwm(ast, 0x1E6E2090, 0x20000000); + ast_moutdwm(ast, 0x1E6E2094, 0x00004000); + if (ast_mindwm(ast, 0x1E6E2070) & 0x00800000) { + ast_moutdwm(ast, 0x1E6E207C, 0x00800000); + mdelay(100); + ast_moutdwm(ast, 0x1E6E2070, 0x00800000); + } + /* Modify eSPI reset pin */ + temp = ast_mindwm(ast, 0x1E6E2070); + if (temp & 0x02000000) + ast_moutdwm(ast, 0x1E6E207C, 0x00004000); /* Slow down CPU/AHB CLK in VGA only mode */ temp = ast_read32(ast, 0x12008); temp |= 0x73; ast_write32(ast, 0x12008, temp); - /* Reset USB port to patch USB unknown device issue */ - ast_moutdwm(ast, 0x1e6e2090, 0x20000000); - temp = ast_mindwm(ast, 0x1e6e2094); - temp |= 0x00004000; - ast_moutdwm(ast, 0x1e6e2094, temp); - temp = ast_mindwm(ast, 0x1e6e2070); - if (temp & 0x00800000) { - ast_moutdwm(ast, 0x1e6e207c, 0x00800000); - mdelay(100); - ast_moutdwm(ast, 0x1e6e2070, 0x00800000); - } - if (!ast_dram_init_2500(ast)) drm_err(dev, "DRAM init failed !\n"); -- 2.18.4 _______________________________________________ dri-devel mailing list dri-devel@lists.freedesktop.org https://lists.freedesktop.org/mailman/listinfo/dri-devel
next prev parent reply other threads:[~2021-01-12 7:59 UTC|newest] Thread overview: 10+ messages / expand[flat|nested] mbox.gz Atom feed top 2021-01-11 6:43 [PATCH] drm/ast: Disable fast reset after DRAM initial KuoHsiang Chou 2021-01-11 6:43 ` KuoHsiang Chou 2021-01-11 7:44 ` Thomas Zimmermann 2021-01-11 7:44 ` Thomas Zimmermann 2021-01-12 7:58 ` KuoHsiang Chou [this message] 2021-01-12 7:58 ` [PATCH v2] " KuoHsiang Chou 2021-01-18 9:05 ` Thomas Zimmermann 2021-01-18 9:05 ` Thomas Zimmermann 2021-01-19 3:00 ` Kuo-Hsiang Chou 2021-01-19 3:00 ` Kuo-Hsiang Chou
Reply instructions: You may reply publicly to this message via plain-text email using any one of the following methods: * Save the following mbox file, import it into your mail client, and reply-to-all from there: mbox Avoid top-posting and favor interleaved quoting: https://en.wikipedia.org/wiki/Posting_style#Interleaved_style * Reply using the --to, --cc, and --in-reply-to switches of git-send-email(1): git send-email \ --in-reply-to=20210112075811.9354-1-kuohsiang_chou@aspeedtech.com \ --to=kuohsiang_chou@aspeedtech.com \ --cc=airlied@linux.ie \ --cc=airlied@redhat.com \ --cc=arc_sung@aspeedtech.com \ --cc=daniel@ffwll.ch \ --cc=dri-devel@lists.freedesktop.org \ --cc=jenmin_yuan@aspeedtech.com \ --cc=linux-kernel@vger.kernel.org \ --cc=tommy_huang@aspeedtech.com \ --cc=tzimmermann@suse.de \ /path/to/YOUR_REPLY https://kernel.org/pub/software/scm/git/docs/git-send-email.html * If your mail client supports setting the In-Reply-To header via mailto: links, try the mailto: linkBe sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.