* [PATCH v4 1/3] arm64: dts: mt8183: config dsi node
@ 2021-01-13 11:03 ` Hsin-Yi Wang
0 siblings, 0 replies; 21+ messages in thread
From: Hsin-Yi Wang @ 2021-01-13 11:03 UTC (permalink / raw)
To: linux-arm-kernel, Matthias Brugger
Cc: devicetree, Nicolas Boichat, linux-kernel, Rob Herring,
linux-mediatek, Enric Balletbo i Serra
Config dsi node for mt8183 kukui. Set panel and ports.
Several kukui boards share the same panel property and only compatible
is different. So compatible will be set in board dts for comparison
convenience.
Signed-off-by: Hsin-Yi Wang <hsinyi@chromium.org>
Reviewed-by: Nicolas Boichat <drinkcat@chromium.org>
---
change:
v4: add backlight and enable mipi_tx0
---
.../mediatek/mt8183-kukui-krane-sku176.dts | 5 +++
.../arm64/boot/dts/mediatek/mt8183-kukui.dtsi | 42 +++++++++++++++++++
2 files changed, 47 insertions(+)
diff --git a/arch/arm64/boot/dts/mediatek/mt8183-kukui-krane-sku176.dts b/arch/arm64/boot/dts/mediatek/mt8183-kukui-krane-sku176.dts
index 47113e275cb52..721d16f9c3b4f 100644
--- a/arch/arm64/boot/dts/mediatek/mt8183-kukui-krane-sku176.dts
+++ b/arch/arm64/boot/dts/mediatek/mt8183-kukui-krane-sku176.dts
@@ -16,3 +16,8 @@ / {
model = "MediaTek krane sku176 board";
compatible = "google,krane-sku176", "google,krane", "mediatek,mt8183";
};
+
+&panel {
+ status = "okay";
+ compatible = "boe,tv101wum-nl6";
+};
diff --git a/arch/arm64/boot/dts/mediatek/mt8183-kukui.dtsi b/arch/arm64/boot/dts/mediatek/mt8183-kukui.dtsi
index bf2ad1294dd30..da1e947587074 100644
--- a/arch/arm64/boot/dts/mediatek/mt8183-kukui.dtsi
+++ b/arch/arm64/boot/dts/mediatek/mt8183-kukui.dtsi
@@ -249,6 +249,36 @@ &cpu7 {
proc-supply = <&mt6358_vproc11_reg>;
};
+&dsi0 {
+ status = "okay";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ panel: panel@0 {
+ /* compatible will be set in board dts */
+ reg = <0>;
+ enable-gpios = <&pio 45 0>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&panel_pins_default>;
+ avdd-supply = <&ppvarn_lcd>;
+ avee-supply = <&ppvarp_lcd>;
+ pp1800-supply = <&pp1800_lcd>;
+ backlight = <&backlight_lcd0>;
+ port {
+ panel_in: endpoint {
+ remote-endpoint = <&dsi_out>;
+ };
+ };
+ };
+
+ ports {
+ port {
+ dsi_out: endpoint {
+ remote-endpoint = <&panel_in>;
+ };
+ };
+ };
+};
+
&i2c0 {
pinctrl-names = "default";
pinctrl-0 = <&i2c0_pins>;
@@ -290,6 +320,10 @@ &i2c6 {
clock-frequency = <100000>;
};
+&mipi_tx0 {
+ status = "okay";
+};
+
&mmc0 {
status = "okay";
pinctrl-names = "default", "state_uhs";
@@ -547,6 +581,14 @@ pins_clk {
};
};
+ panel_pins_default: panel_pins_default {
+ panel_reset {
+ pinmux = <PINMUX_GPIO45__FUNC_GPIO45>;
+ output-low;
+ bias-pull-up;
+ };
+ };
+
pwm0_pin_default: pwm0_pin_default {
pins1 {
pinmux = <PINMUX_GPIO176__FUNC_GPIO176>;
--
2.30.0.284.gd98b1dd5eaa7-goog
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply related [flat|nested] 21+ messages in thread* [PATCH v4 1/3] arm64: dts: mt8183: config dsi node
@ 2021-01-13 11:03 ` Hsin-Yi Wang
0 siblings, 0 replies; 21+ messages in thread
From: Hsin-Yi Wang @ 2021-01-13 11:03 UTC (permalink / raw)
To: linux-arm-kernel, Matthias Brugger
Cc: devicetree, Nicolas Boichat, linux-kernel, Rob Herring,
linux-mediatek, Enric Balletbo i Serra
Config dsi node for mt8183 kukui. Set panel and ports.
Several kukui boards share the same panel property and only compatible
is different. So compatible will be set in board dts for comparison
convenience.
Signed-off-by: Hsin-Yi Wang <hsinyi@chromium.org>
Reviewed-by: Nicolas Boichat <drinkcat@chromium.org>
---
change:
v4: add backlight and enable mipi_tx0
---
.../mediatek/mt8183-kukui-krane-sku176.dts | 5 +++
.../arm64/boot/dts/mediatek/mt8183-kukui.dtsi | 42 +++++++++++++++++++
2 files changed, 47 insertions(+)
diff --git a/arch/arm64/boot/dts/mediatek/mt8183-kukui-krane-sku176.dts b/arch/arm64/boot/dts/mediatek/mt8183-kukui-krane-sku176.dts
index 47113e275cb52..721d16f9c3b4f 100644
--- a/arch/arm64/boot/dts/mediatek/mt8183-kukui-krane-sku176.dts
+++ b/arch/arm64/boot/dts/mediatek/mt8183-kukui-krane-sku176.dts
@@ -16,3 +16,8 @@ / {
model = "MediaTek krane sku176 board";
compatible = "google,krane-sku176", "google,krane", "mediatek,mt8183";
};
+
+&panel {
+ status = "okay";
+ compatible = "boe,tv101wum-nl6";
+};
diff --git a/arch/arm64/boot/dts/mediatek/mt8183-kukui.dtsi b/arch/arm64/boot/dts/mediatek/mt8183-kukui.dtsi
index bf2ad1294dd30..da1e947587074 100644
--- a/arch/arm64/boot/dts/mediatek/mt8183-kukui.dtsi
+++ b/arch/arm64/boot/dts/mediatek/mt8183-kukui.dtsi
@@ -249,6 +249,36 @@ &cpu7 {
proc-supply = <&mt6358_vproc11_reg>;
};
+&dsi0 {
+ status = "okay";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ panel: panel@0 {
+ /* compatible will be set in board dts */
+ reg = <0>;
+ enable-gpios = <&pio 45 0>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&panel_pins_default>;
+ avdd-supply = <&ppvarn_lcd>;
+ avee-supply = <&ppvarp_lcd>;
+ pp1800-supply = <&pp1800_lcd>;
+ backlight = <&backlight_lcd0>;
+ port {
+ panel_in: endpoint {
+ remote-endpoint = <&dsi_out>;
+ };
+ };
+ };
+
+ ports {
+ port {
+ dsi_out: endpoint {
+ remote-endpoint = <&panel_in>;
+ };
+ };
+ };
+};
+
&i2c0 {
pinctrl-names = "default";
pinctrl-0 = <&i2c0_pins>;
@@ -290,6 +320,10 @@ &i2c6 {
clock-frequency = <100000>;
};
+&mipi_tx0 {
+ status = "okay";
+};
+
&mmc0 {
status = "okay";
pinctrl-names = "default", "state_uhs";
@@ -547,6 +581,14 @@ pins_clk {
};
};
+ panel_pins_default: panel_pins_default {
+ panel_reset {
+ pinmux = <PINMUX_GPIO45__FUNC_GPIO45>;
+ output-low;
+ bias-pull-up;
+ };
+ };
+
pwm0_pin_default: pwm0_pin_default {
pins1 {
pinmux = <PINMUX_GPIO176__FUNC_GPIO176>;
--
2.30.0.284.gd98b1dd5eaa7-goog
_______________________________________________
Linux-mediatek mailing list
Linux-mediatek@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-mediatek
^ permalink raw reply related [flat|nested] 21+ messages in thread* [PATCH v4 2/3] arm64: dts: mt8183: Add krane-sku0 board.
2021-01-13 11:03 ` Hsin-Yi Wang
(?)
@ 2021-01-13 11:04 ` Hsin-Yi Wang
-1 siblings, 0 replies; 21+ messages in thread
From: Hsin-Yi Wang @ 2021-01-13 11:04 UTC (permalink / raw)
To: linux-arm-kernel, Matthias Brugger
Cc: Rob Herring, Enric Balletbo i Serra, Nicolas Boichat, devicetree,
linux-mediatek, linux-kernel
Similar to krane-sku176 but using a different panel source.
Signed-off-by: Hsin-Yi Wang <hsinyi@chromium.org>
Reviewed-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
---
change:
v4: split dt-binding to another patch
---
arch/arm64/boot/dts/mediatek/Makefile | 1 +
.../dts/mediatek/mt8183-kukui-krane-sku0.dts | 23 +++++++++++++++++++
2 files changed, 24 insertions(+)
create mode 100644 arch/arm64/boot/dts/mediatek/mt8183-kukui-krane-sku0.dts
diff --git a/arch/arm64/boot/dts/mediatek/Makefile b/arch/arm64/boot/dts/mediatek/Makefile
index 18f7b46c4095b..deba27ab76574 100644
--- a/arch/arm64/boot/dts/mediatek/Makefile
+++ b/arch/arm64/boot/dts/mediatek/Makefile
@@ -13,6 +13,7 @@ dtb-$(CONFIG_ARCH_MEDIATEK) += mt8173-elm-hana.dtb
dtb-$(CONFIG_ARCH_MEDIATEK) += mt8173-elm-hana-rev7.dtb
dtb-$(CONFIG_ARCH_MEDIATEK) += mt8173-evb.dtb
dtb-$(CONFIG_ARCH_MEDIATEK) += mt8183-evb.dtb
+dtb-$(CONFIG_ARCH_MEDIATEK) += mt8183-kukui-krane-sku0.dtb
dtb-$(CONFIG_ARCH_MEDIATEK) += mt8183-kukui-krane-sku176.dtb
dtb-$(CONFIG_ARCH_MEDIATEK) += mt8192-evb.dtb
dtb-$(CONFIG_ARCH_MEDIATEK) += mt8516-pumpkin.dtb
diff --git a/arch/arm64/boot/dts/mediatek/mt8183-kukui-krane-sku0.dts b/arch/arm64/boot/dts/mediatek/mt8183-kukui-krane-sku0.dts
new file mode 100644
index 0000000000000..fb5ee91b6fe0e
--- /dev/null
+++ b/arch/arm64/boot/dts/mediatek/mt8183-kukui-krane-sku0.dts
@@ -0,0 +1,23 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+/*
+ * Copyright 2019 Google LLC
+ *
+ * Device-tree for Krane sku0.
+ *
+ * SKU is a 8-bit value (0x00 == 0):
+ * - Bits 7..4: Panel ID: 0x0 (AUO)
+ * - Bits 3..0: SKU ID: 0x0 (default)
+ */
+
+/dts-v1/;
+#include "mt8183-kukui-krane.dtsi"
+
+/ {
+ model = "MediaTek krane sku0 board";
+ compatible = "google,krane-sku0", "google,krane", "mediatek,mt8183";
+};
+
+&panel {
+ status = "okay";
+ compatible = "auo,kd101n80-45na";
+};
--
2.30.0.284.gd98b1dd5eaa7-goog
^ permalink raw reply related [flat|nested] 21+ messages in thread* [PATCH v4 2/3] arm64: dts: mt8183: Add krane-sku0 board.
@ 2021-01-13 11:04 ` Hsin-Yi Wang
0 siblings, 0 replies; 21+ messages in thread
From: Hsin-Yi Wang @ 2021-01-13 11:04 UTC (permalink / raw)
To: linux-arm-kernel, Matthias Brugger
Cc: devicetree, Nicolas Boichat, linux-kernel, Rob Herring,
linux-mediatek, Enric Balletbo i Serra
Similar to krane-sku176 but using a different panel source.
Signed-off-by: Hsin-Yi Wang <hsinyi@chromium.org>
Reviewed-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
---
change:
v4: split dt-binding to another patch
---
arch/arm64/boot/dts/mediatek/Makefile | 1 +
.../dts/mediatek/mt8183-kukui-krane-sku0.dts | 23 +++++++++++++++++++
2 files changed, 24 insertions(+)
create mode 100644 arch/arm64/boot/dts/mediatek/mt8183-kukui-krane-sku0.dts
diff --git a/arch/arm64/boot/dts/mediatek/Makefile b/arch/arm64/boot/dts/mediatek/Makefile
index 18f7b46c4095b..deba27ab76574 100644
--- a/arch/arm64/boot/dts/mediatek/Makefile
+++ b/arch/arm64/boot/dts/mediatek/Makefile
@@ -13,6 +13,7 @@ dtb-$(CONFIG_ARCH_MEDIATEK) += mt8173-elm-hana.dtb
dtb-$(CONFIG_ARCH_MEDIATEK) += mt8173-elm-hana-rev7.dtb
dtb-$(CONFIG_ARCH_MEDIATEK) += mt8173-evb.dtb
dtb-$(CONFIG_ARCH_MEDIATEK) += mt8183-evb.dtb
+dtb-$(CONFIG_ARCH_MEDIATEK) += mt8183-kukui-krane-sku0.dtb
dtb-$(CONFIG_ARCH_MEDIATEK) += mt8183-kukui-krane-sku176.dtb
dtb-$(CONFIG_ARCH_MEDIATEK) += mt8192-evb.dtb
dtb-$(CONFIG_ARCH_MEDIATEK) += mt8516-pumpkin.dtb
diff --git a/arch/arm64/boot/dts/mediatek/mt8183-kukui-krane-sku0.dts b/arch/arm64/boot/dts/mediatek/mt8183-kukui-krane-sku0.dts
new file mode 100644
index 0000000000000..fb5ee91b6fe0e
--- /dev/null
+++ b/arch/arm64/boot/dts/mediatek/mt8183-kukui-krane-sku0.dts
@@ -0,0 +1,23 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+/*
+ * Copyright 2019 Google LLC
+ *
+ * Device-tree for Krane sku0.
+ *
+ * SKU is a 8-bit value (0x00 == 0):
+ * - Bits 7..4: Panel ID: 0x0 (AUO)
+ * - Bits 3..0: SKU ID: 0x0 (default)
+ */
+
+/dts-v1/;
+#include "mt8183-kukui-krane.dtsi"
+
+/ {
+ model = "MediaTek krane sku0 board";
+ compatible = "google,krane-sku0", "google,krane", "mediatek,mt8183";
+};
+
+&panel {
+ status = "okay";
+ compatible = "auo,kd101n80-45na";
+};
--
2.30.0.284.gd98b1dd5eaa7-goog
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply related [flat|nested] 21+ messages in thread* [PATCH v4 2/3] arm64: dts: mt8183: Add krane-sku0 board.
@ 2021-01-13 11:04 ` Hsin-Yi Wang
0 siblings, 0 replies; 21+ messages in thread
From: Hsin-Yi Wang @ 2021-01-13 11:04 UTC (permalink / raw)
To: linux-arm-kernel, Matthias Brugger
Cc: devicetree, Nicolas Boichat, linux-kernel, Rob Herring,
linux-mediatek, Enric Balletbo i Serra
Similar to krane-sku176 but using a different panel source.
Signed-off-by: Hsin-Yi Wang <hsinyi@chromium.org>
Reviewed-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
---
change:
v4: split dt-binding to another patch
---
arch/arm64/boot/dts/mediatek/Makefile | 1 +
.../dts/mediatek/mt8183-kukui-krane-sku0.dts | 23 +++++++++++++++++++
2 files changed, 24 insertions(+)
create mode 100644 arch/arm64/boot/dts/mediatek/mt8183-kukui-krane-sku0.dts
diff --git a/arch/arm64/boot/dts/mediatek/Makefile b/arch/arm64/boot/dts/mediatek/Makefile
index 18f7b46c4095b..deba27ab76574 100644
--- a/arch/arm64/boot/dts/mediatek/Makefile
+++ b/arch/arm64/boot/dts/mediatek/Makefile
@@ -13,6 +13,7 @@ dtb-$(CONFIG_ARCH_MEDIATEK) += mt8173-elm-hana.dtb
dtb-$(CONFIG_ARCH_MEDIATEK) += mt8173-elm-hana-rev7.dtb
dtb-$(CONFIG_ARCH_MEDIATEK) += mt8173-evb.dtb
dtb-$(CONFIG_ARCH_MEDIATEK) += mt8183-evb.dtb
+dtb-$(CONFIG_ARCH_MEDIATEK) += mt8183-kukui-krane-sku0.dtb
dtb-$(CONFIG_ARCH_MEDIATEK) += mt8183-kukui-krane-sku176.dtb
dtb-$(CONFIG_ARCH_MEDIATEK) += mt8192-evb.dtb
dtb-$(CONFIG_ARCH_MEDIATEK) += mt8516-pumpkin.dtb
diff --git a/arch/arm64/boot/dts/mediatek/mt8183-kukui-krane-sku0.dts b/arch/arm64/boot/dts/mediatek/mt8183-kukui-krane-sku0.dts
new file mode 100644
index 0000000000000..fb5ee91b6fe0e
--- /dev/null
+++ b/arch/arm64/boot/dts/mediatek/mt8183-kukui-krane-sku0.dts
@@ -0,0 +1,23 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+/*
+ * Copyright 2019 Google LLC
+ *
+ * Device-tree for Krane sku0.
+ *
+ * SKU is a 8-bit value (0x00 == 0):
+ * - Bits 7..4: Panel ID: 0x0 (AUO)
+ * - Bits 3..0: SKU ID: 0x0 (default)
+ */
+
+/dts-v1/;
+#include "mt8183-kukui-krane.dtsi"
+
+/ {
+ model = "MediaTek krane sku0 board";
+ compatible = "google,krane-sku0", "google,krane", "mediatek,mt8183";
+};
+
+&panel {
+ status = "okay";
+ compatible = "auo,kd101n80-45na";
+};
--
2.30.0.284.gd98b1dd5eaa7-goog
_______________________________________________
Linux-mediatek mailing list
Linux-mediatek@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-mediatek
^ permalink raw reply related [flat|nested] 21+ messages in thread
* [PATCH v4 3/3] dt-bindings: arm64: dts: mediatek: Add krane sku0
2021-01-13 11:03 ` Hsin-Yi Wang
(?)
@ 2021-01-13 11:04 ` Hsin-Yi Wang
-1 siblings, 0 replies; 21+ messages in thread
From: Hsin-Yi Wang @ 2021-01-13 11:04 UTC (permalink / raw)
To: linux-arm-kernel, Matthias Brugger
Cc: Rob Herring, Enric Balletbo i Serra, Nicolas Boichat, devicetree,
linux-mediatek, linux-kernel
Krane-sku0 is similar to krane-sku176 but using a different panel
source.
Signed-off-by: Hsin-Yi Wang <hsinyi@chromium.org>
---
Documentation/devicetree/bindings/arm/mediatek.yaml | 4 +++-
1 file changed, 3 insertions(+), 1 deletion(-)
diff --git a/Documentation/devicetree/bindings/arm/mediatek.yaml b/Documentation/devicetree/bindings/arm/mediatek.yaml
index 53f0d4e3ea982..93b3bdf6eaeb7 100644
--- a/Documentation/devicetree/bindings/arm/mediatek.yaml
+++ b/Documentation/devicetree/bindings/arm/mediatek.yaml
@@ -120,7 +120,9 @@ properties:
- const: mediatek,mt8183
- description: Google Krane (Lenovo IdeaPad Duet, 10e,...)
items:
- - const: google,krane-sku176
+ - enum:
+ - google,krane-sku0
+ - google,krane-sku176
- const: google,krane
- const: mediatek,mt8183
--
2.30.0.284.gd98b1dd5eaa7-goog
^ permalink raw reply related [flat|nested] 21+ messages in thread* [PATCH v4 3/3] dt-bindings: arm64: dts: mediatek: Add krane sku0
@ 2021-01-13 11:04 ` Hsin-Yi Wang
0 siblings, 0 replies; 21+ messages in thread
From: Hsin-Yi Wang @ 2021-01-13 11:04 UTC (permalink / raw)
To: linux-arm-kernel, Matthias Brugger
Cc: devicetree, Nicolas Boichat, linux-kernel, Rob Herring,
linux-mediatek, Enric Balletbo i Serra
Krane-sku0 is similar to krane-sku176 but using a different panel
source.
Signed-off-by: Hsin-Yi Wang <hsinyi@chromium.org>
---
Documentation/devicetree/bindings/arm/mediatek.yaml | 4 +++-
1 file changed, 3 insertions(+), 1 deletion(-)
diff --git a/Documentation/devicetree/bindings/arm/mediatek.yaml b/Documentation/devicetree/bindings/arm/mediatek.yaml
index 53f0d4e3ea982..93b3bdf6eaeb7 100644
--- a/Documentation/devicetree/bindings/arm/mediatek.yaml
+++ b/Documentation/devicetree/bindings/arm/mediatek.yaml
@@ -120,7 +120,9 @@ properties:
- const: mediatek,mt8183
- description: Google Krane (Lenovo IdeaPad Duet, 10e,...)
items:
- - const: google,krane-sku176
+ - enum:
+ - google,krane-sku0
+ - google,krane-sku176
- const: google,krane
- const: mediatek,mt8183
--
2.30.0.284.gd98b1dd5eaa7-goog
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply related [flat|nested] 21+ messages in thread* [PATCH v4 3/3] dt-bindings: arm64: dts: mediatek: Add krane sku0
@ 2021-01-13 11:04 ` Hsin-Yi Wang
0 siblings, 0 replies; 21+ messages in thread
From: Hsin-Yi Wang @ 2021-01-13 11:04 UTC (permalink / raw)
To: linux-arm-kernel, Matthias Brugger
Cc: devicetree, Nicolas Boichat, linux-kernel, Rob Herring,
linux-mediatek, Enric Balletbo i Serra
Krane-sku0 is similar to krane-sku176 but using a different panel
source.
Signed-off-by: Hsin-Yi Wang <hsinyi@chromium.org>
---
Documentation/devicetree/bindings/arm/mediatek.yaml | 4 +++-
1 file changed, 3 insertions(+), 1 deletion(-)
diff --git a/Documentation/devicetree/bindings/arm/mediatek.yaml b/Documentation/devicetree/bindings/arm/mediatek.yaml
index 53f0d4e3ea982..93b3bdf6eaeb7 100644
--- a/Documentation/devicetree/bindings/arm/mediatek.yaml
+++ b/Documentation/devicetree/bindings/arm/mediatek.yaml
@@ -120,7 +120,9 @@ properties:
- const: mediatek,mt8183
- description: Google Krane (Lenovo IdeaPad Duet, 10e,...)
items:
- - const: google,krane-sku176
+ - enum:
+ - google,krane-sku0
+ - google,krane-sku176
- const: google,krane
- const: mediatek,mt8183
--
2.30.0.284.gd98b1dd5eaa7-goog
_______________________________________________
Linux-mediatek mailing list
Linux-mediatek@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-mediatek
^ permalink raw reply related [flat|nested] 21+ messages in thread* Re: [PATCH v4 3/3] dt-bindings: arm64: dts: mediatek: Add krane sku0
2021-01-13 11:04 ` Hsin-Yi Wang
(?)
@ 2021-01-13 11:29 ` Enric Balletbo i Serra
-1 siblings, 0 replies; 21+ messages in thread
From: Enric Balletbo i Serra @ 2021-01-13 11:29 UTC (permalink / raw)
To: Hsin-Yi Wang, linux-arm-kernel, Matthias Brugger
Cc: Rob Herring, Nicolas Boichat, devicetree, linux-mediatek, linux-kernel
Hi Hsin-Yi,
On 13/1/21 12:04, Hsin-Yi Wang wrote:
> Krane-sku0 is similar to krane-sku176 but using a different panel
> source.
>
> Signed-off-by: Hsin-Yi Wang <hsinyi@chromium.org>
Reviewed-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
> ---
> Documentation/devicetree/bindings/arm/mediatek.yaml | 4 +++-
> 1 file changed, 3 insertions(+), 1 deletion(-)
>
> diff --git a/Documentation/devicetree/bindings/arm/mediatek.yaml b/Documentation/devicetree/bindings/arm/mediatek.yaml
> index 53f0d4e3ea982..93b3bdf6eaeb7 100644
> --- a/Documentation/devicetree/bindings/arm/mediatek.yaml
> +++ b/Documentation/devicetree/bindings/arm/mediatek.yaml
> @@ -120,7 +120,9 @@ properties:
> - const: mediatek,mt8183
> - description: Google Krane (Lenovo IdeaPad Duet, 10e,...)
> items:
> - - const: google,krane-sku176
> + - enum:
> + - google,krane-sku0
> + - google,krane-sku176
> - const: google,krane
> - const: mediatek,mt8183
>
>
^ permalink raw reply [flat|nested] 21+ messages in thread
* Re: [PATCH v4 3/3] dt-bindings: arm64: dts: mediatek: Add krane sku0
@ 2021-01-13 11:29 ` Enric Balletbo i Serra
0 siblings, 0 replies; 21+ messages in thread
From: Enric Balletbo i Serra @ 2021-01-13 11:29 UTC (permalink / raw)
To: Hsin-Yi Wang, linux-arm-kernel, Matthias Brugger
Cc: Nicolas Boichat, Rob Herring, linux-mediatek, linux-kernel, devicetree
Hi Hsin-Yi,
On 13/1/21 12:04, Hsin-Yi Wang wrote:
> Krane-sku0 is similar to krane-sku176 but using a different panel
> source.
>
> Signed-off-by: Hsin-Yi Wang <hsinyi@chromium.org>
Reviewed-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
> ---
> Documentation/devicetree/bindings/arm/mediatek.yaml | 4 +++-
> 1 file changed, 3 insertions(+), 1 deletion(-)
>
> diff --git a/Documentation/devicetree/bindings/arm/mediatek.yaml b/Documentation/devicetree/bindings/arm/mediatek.yaml
> index 53f0d4e3ea982..93b3bdf6eaeb7 100644
> --- a/Documentation/devicetree/bindings/arm/mediatek.yaml
> +++ b/Documentation/devicetree/bindings/arm/mediatek.yaml
> @@ -120,7 +120,9 @@ properties:
> - const: mediatek,mt8183
> - description: Google Krane (Lenovo IdeaPad Duet, 10e,...)
> items:
> - - const: google,krane-sku176
> + - enum:
> + - google,krane-sku0
> + - google,krane-sku176
> - const: google,krane
> - const: mediatek,mt8183
>
>
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply [flat|nested] 21+ messages in thread
* Re: [PATCH v4 3/3] dt-bindings: arm64: dts: mediatek: Add krane sku0
@ 2021-01-13 11:29 ` Enric Balletbo i Serra
0 siblings, 0 replies; 21+ messages in thread
From: Enric Balletbo i Serra @ 2021-01-13 11:29 UTC (permalink / raw)
To: Hsin-Yi Wang, linux-arm-kernel, Matthias Brugger
Cc: Nicolas Boichat, Rob Herring, linux-mediatek, linux-kernel, devicetree
Hi Hsin-Yi,
On 13/1/21 12:04, Hsin-Yi Wang wrote:
> Krane-sku0 is similar to krane-sku176 but using a different panel
> source.
>
> Signed-off-by: Hsin-Yi Wang <hsinyi@chromium.org>
Reviewed-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
> ---
> Documentation/devicetree/bindings/arm/mediatek.yaml | 4 +++-
> 1 file changed, 3 insertions(+), 1 deletion(-)
>
> diff --git a/Documentation/devicetree/bindings/arm/mediatek.yaml b/Documentation/devicetree/bindings/arm/mediatek.yaml
> index 53f0d4e3ea982..93b3bdf6eaeb7 100644
> --- a/Documentation/devicetree/bindings/arm/mediatek.yaml
> +++ b/Documentation/devicetree/bindings/arm/mediatek.yaml
> @@ -120,7 +120,9 @@ properties:
> - const: mediatek,mt8183
> - description: Google Krane (Lenovo IdeaPad Duet, 10e,...)
> items:
> - - const: google,krane-sku176
> + - enum:
> + - google,krane-sku0
> + - google,krane-sku176
> - const: google,krane
> - const: mediatek,mt8183
>
>
_______________________________________________
Linux-mediatek mailing list
Linux-mediatek@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-mediatek
^ permalink raw reply [flat|nested] 21+ messages in thread
* Re: [PATCH v4 3/3] dt-bindings: arm64: dts: mediatek: Add krane sku0
2021-01-13 11:04 ` Hsin-Yi Wang
(?)
@ 2021-01-25 19:36 ` Rob Herring
-1 siblings, 0 replies; 21+ messages in thread
From: Rob Herring @ 2021-01-25 19:36 UTC (permalink / raw)
To: Hsin-Yi Wang
Cc: linux-mediatek, devicetree, Enric Balletbo i Serra,
Matthias Brugger, linux-arm-kernel, Nicolas Boichat, Rob Herring,
linux-kernel
On Wed, 13 Jan 2021 19:04:03 +0800, Hsin-Yi Wang wrote:
> Krane-sku0 is similar to krane-sku176 but using a different panel
> source.
>
> Signed-off-by: Hsin-Yi Wang <hsinyi@chromium.org>
> ---
> Documentation/devicetree/bindings/arm/mediatek.yaml | 4 +++-
> 1 file changed, 3 insertions(+), 1 deletion(-)
>
Reviewed-by: Rob Herring <robh@kernel.org>
^ permalink raw reply [flat|nested] 21+ messages in thread
* Re: [PATCH v4 3/3] dt-bindings: arm64: dts: mediatek: Add krane sku0
@ 2021-01-25 19:36 ` Rob Herring
0 siblings, 0 replies; 21+ messages in thread
From: Rob Herring @ 2021-01-25 19:36 UTC (permalink / raw)
To: Hsin-Yi Wang
Cc: devicetree, Nicolas Boichat, linux-kernel, Matthias Brugger,
Rob Herring, linux-mediatek, Enric Balletbo i Serra,
linux-arm-kernel
On Wed, 13 Jan 2021 19:04:03 +0800, Hsin-Yi Wang wrote:
> Krane-sku0 is similar to krane-sku176 but using a different panel
> source.
>
> Signed-off-by: Hsin-Yi Wang <hsinyi@chromium.org>
> ---
> Documentation/devicetree/bindings/arm/mediatek.yaml | 4 +++-
> 1 file changed, 3 insertions(+), 1 deletion(-)
>
Reviewed-by: Rob Herring <robh@kernel.org>
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply [flat|nested] 21+ messages in thread
* Re: [PATCH v4 3/3] dt-bindings: arm64: dts: mediatek: Add krane sku0
@ 2021-01-25 19:36 ` Rob Herring
0 siblings, 0 replies; 21+ messages in thread
From: Rob Herring @ 2021-01-25 19:36 UTC (permalink / raw)
To: Hsin-Yi Wang
Cc: devicetree, Nicolas Boichat, linux-kernel, Matthias Brugger,
Rob Herring, linux-mediatek, Enric Balletbo i Serra,
linux-arm-kernel
On Wed, 13 Jan 2021 19:04:03 +0800, Hsin-Yi Wang wrote:
> Krane-sku0 is similar to krane-sku176 but using a different panel
> source.
>
> Signed-off-by: Hsin-Yi Wang <hsinyi@chromium.org>
> ---
> Documentation/devicetree/bindings/arm/mediatek.yaml | 4 +++-
> 1 file changed, 3 insertions(+), 1 deletion(-)
>
Reviewed-by: Rob Herring <robh@kernel.org>
_______________________________________________
Linux-mediatek mailing list
Linux-mediatek@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-mediatek
^ permalink raw reply [flat|nested] 21+ messages in thread
* Re: [PATCH v4 1/3] arm64: dts: mt8183: config dsi node
2021-01-13 11:03 ` Hsin-Yi Wang
(?)
@ 2021-01-13 11:28 ` Enric Balletbo i Serra
-1 siblings, 0 replies; 21+ messages in thread
From: Enric Balletbo i Serra @ 2021-01-13 11:28 UTC (permalink / raw)
To: Hsin-Yi Wang, linux-arm-kernel, Matthias Brugger
Cc: Rob Herring, Nicolas Boichat, devicetree, linux-mediatek, linux-kernel
Hi Hsin-Yi,
On 13/1/21 12:03, Hsin-Yi Wang wrote:
> Config dsi node for mt8183 kukui. Set panel and ports.
>
> Several kukui boards share the same panel property and only compatible
> is different. So compatible will be set in board dts for comparison
> convenience.
>
> Signed-off-by: Hsin-Yi Wang <hsinyi@chromium.org>
> Reviewed-by: Nicolas Boichat <drinkcat@chromium.org>
Tested on my Lenovo Ideapad Duet. Display is working.
Tested-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
> ---
> change:
> v4: add backlight and enable mipi_tx0
> ---
> .../mediatek/mt8183-kukui-krane-sku176.dts | 5 +++
> .../arm64/boot/dts/mediatek/mt8183-kukui.dtsi | 42 +++++++++++++++++++
> 2 files changed, 47 insertions(+)
>
> diff --git a/arch/arm64/boot/dts/mediatek/mt8183-kukui-krane-sku176.dts b/arch/arm64/boot/dts/mediatek/mt8183-kukui-krane-sku176.dts
> index 47113e275cb52..721d16f9c3b4f 100644
> --- a/arch/arm64/boot/dts/mediatek/mt8183-kukui-krane-sku176.dts
> +++ b/arch/arm64/boot/dts/mediatek/mt8183-kukui-krane-sku176.dts
> @@ -16,3 +16,8 @@ / {
> model = "MediaTek krane sku176 board";
> compatible = "google,krane-sku176", "google,krane", "mediatek,mt8183";
> };
> +
> +&panel {
> + status = "okay";
> + compatible = "boe,tv101wum-nl6";
> +};
> diff --git a/arch/arm64/boot/dts/mediatek/mt8183-kukui.dtsi b/arch/arm64/boot/dts/mediatek/mt8183-kukui.dtsi
> index bf2ad1294dd30..da1e947587074 100644
> --- a/arch/arm64/boot/dts/mediatek/mt8183-kukui.dtsi
> +++ b/arch/arm64/boot/dts/mediatek/mt8183-kukui.dtsi
> @@ -249,6 +249,36 @@ &cpu7 {
> proc-supply = <&mt6358_vproc11_reg>;
> };
>
> +&dsi0 {
> + status = "okay";
> + #address-cells = <1>;
> + #size-cells = <0>;
> + panel: panel@0 {
> + /* compatible will be set in board dts */
> + reg = <0>;
> + enable-gpios = <&pio 45 0>;
> + pinctrl-names = "default";
> + pinctrl-0 = <&panel_pins_default>;
> + avdd-supply = <&ppvarn_lcd>;
> + avee-supply = <&ppvarp_lcd>;
> + pp1800-supply = <&pp1800_lcd>;
> + backlight = <&backlight_lcd0>;
> + port {
> + panel_in: endpoint {
> + remote-endpoint = <&dsi_out>;
> + };
> + };
> + };
> +
> + ports {
> + port {
> + dsi_out: endpoint {
> + remote-endpoint = <&panel_in>;
> + };
> + };
> + };
> +};
> +
> &i2c0 {
> pinctrl-names = "default";
> pinctrl-0 = <&i2c0_pins>;
> @@ -290,6 +320,10 @@ &i2c6 {
> clock-frequency = <100000>;
> };
>
> +&mipi_tx0 {
> + status = "okay";
> +};
> +
> &mmc0 {
> status = "okay";
> pinctrl-names = "default", "state_uhs";
> @@ -547,6 +581,14 @@ pins_clk {
> };
> };
>
> + panel_pins_default: panel_pins_default {
> + panel_reset {
> + pinmux = <PINMUX_GPIO45__FUNC_GPIO45>;
> + output-low;
> + bias-pull-up;
> + };
> + };
> +
> pwm0_pin_default: pwm0_pin_default {
> pins1 {
> pinmux = <PINMUX_GPIO176__FUNC_GPIO176>;
>
^ permalink raw reply [flat|nested] 21+ messages in thread* Re: [PATCH v4 1/3] arm64: dts: mt8183: config dsi node
@ 2021-01-13 11:28 ` Enric Balletbo i Serra
0 siblings, 0 replies; 21+ messages in thread
From: Enric Balletbo i Serra @ 2021-01-13 11:28 UTC (permalink / raw)
To: Hsin-Yi Wang, linux-arm-kernel, Matthias Brugger
Cc: Nicolas Boichat, Rob Herring, linux-mediatek, linux-kernel, devicetree
Hi Hsin-Yi,
On 13/1/21 12:03, Hsin-Yi Wang wrote:
> Config dsi node for mt8183 kukui. Set panel and ports.
>
> Several kukui boards share the same panel property and only compatible
> is different. So compatible will be set in board dts for comparison
> convenience.
>
> Signed-off-by: Hsin-Yi Wang <hsinyi@chromium.org>
> Reviewed-by: Nicolas Boichat <drinkcat@chromium.org>
Tested on my Lenovo Ideapad Duet. Display is working.
Tested-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
> ---
> change:
> v4: add backlight and enable mipi_tx0
> ---
> .../mediatek/mt8183-kukui-krane-sku176.dts | 5 +++
> .../arm64/boot/dts/mediatek/mt8183-kukui.dtsi | 42 +++++++++++++++++++
> 2 files changed, 47 insertions(+)
>
> diff --git a/arch/arm64/boot/dts/mediatek/mt8183-kukui-krane-sku176.dts b/arch/arm64/boot/dts/mediatek/mt8183-kukui-krane-sku176.dts
> index 47113e275cb52..721d16f9c3b4f 100644
> --- a/arch/arm64/boot/dts/mediatek/mt8183-kukui-krane-sku176.dts
> +++ b/arch/arm64/boot/dts/mediatek/mt8183-kukui-krane-sku176.dts
> @@ -16,3 +16,8 @@ / {
> model = "MediaTek krane sku176 board";
> compatible = "google,krane-sku176", "google,krane", "mediatek,mt8183";
> };
> +
> +&panel {
> + status = "okay";
> + compatible = "boe,tv101wum-nl6";
> +};
> diff --git a/arch/arm64/boot/dts/mediatek/mt8183-kukui.dtsi b/arch/arm64/boot/dts/mediatek/mt8183-kukui.dtsi
> index bf2ad1294dd30..da1e947587074 100644
> --- a/arch/arm64/boot/dts/mediatek/mt8183-kukui.dtsi
> +++ b/arch/arm64/boot/dts/mediatek/mt8183-kukui.dtsi
> @@ -249,6 +249,36 @@ &cpu7 {
> proc-supply = <&mt6358_vproc11_reg>;
> };
>
> +&dsi0 {
> + status = "okay";
> + #address-cells = <1>;
> + #size-cells = <0>;
> + panel: panel@0 {
> + /* compatible will be set in board dts */
> + reg = <0>;
> + enable-gpios = <&pio 45 0>;
> + pinctrl-names = "default";
> + pinctrl-0 = <&panel_pins_default>;
> + avdd-supply = <&ppvarn_lcd>;
> + avee-supply = <&ppvarp_lcd>;
> + pp1800-supply = <&pp1800_lcd>;
> + backlight = <&backlight_lcd0>;
> + port {
> + panel_in: endpoint {
> + remote-endpoint = <&dsi_out>;
> + };
> + };
> + };
> +
> + ports {
> + port {
> + dsi_out: endpoint {
> + remote-endpoint = <&panel_in>;
> + };
> + };
> + };
> +};
> +
> &i2c0 {
> pinctrl-names = "default";
> pinctrl-0 = <&i2c0_pins>;
> @@ -290,6 +320,10 @@ &i2c6 {
> clock-frequency = <100000>;
> };
>
> +&mipi_tx0 {
> + status = "okay";
> +};
> +
> &mmc0 {
> status = "okay";
> pinctrl-names = "default", "state_uhs";
> @@ -547,6 +581,14 @@ pins_clk {
> };
> };
>
> + panel_pins_default: panel_pins_default {
> + panel_reset {
> + pinmux = <PINMUX_GPIO45__FUNC_GPIO45>;
> + output-low;
> + bias-pull-up;
> + };
> + };
> +
> pwm0_pin_default: pwm0_pin_default {
> pins1 {
> pinmux = <PINMUX_GPIO176__FUNC_GPIO176>;
>
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply [flat|nested] 21+ messages in thread* Re: [PATCH v4 1/3] arm64: dts: mt8183: config dsi node
@ 2021-01-13 11:28 ` Enric Balletbo i Serra
0 siblings, 0 replies; 21+ messages in thread
From: Enric Balletbo i Serra @ 2021-01-13 11:28 UTC (permalink / raw)
To: Hsin-Yi Wang, linux-arm-kernel, Matthias Brugger
Cc: Nicolas Boichat, Rob Herring, linux-mediatek, linux-kernel, devicetree
Hi Hsin-Yi,
On 13/1/21 12:03, Hsin-Yi Wang wrote:
> Config dsi node for mt8183 kukui. Set panel and ports.
>
> Several kukui boards share the same panel property and only compatible
> is different. So compatible will be set in board dts for comparison
> convenience.
>
> Signed-off-by: Hsin-Yi Wang <hsinyi@chromium.org>
> Reviewed-by: Nicolas Boichat <drinkcat@chromium.org>
Tested on my Lenovo Ideapad Duet. Display is working.
Tested-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
> ---
> change:
> v4: add backlight and enable mipi_tx0
> ---
> .../mediatek/mt8183-kukui-krane-sku176.dts | 5 +++
> .../arm64/boot/dts/mediatek/mt8183-kukui.dtsi | 42 +++++++++++++++++++
> 2 files changed, 47 insertions(+)
>
> diff --git a/arch/arm64/boot/dts/mediatek/mt8183-kukui-krane-sku176.dts b/arch/arm64/boot/dts/mediatek/mt8183-kukui-krane-sku176.dts
> index 47113e275cb52..721d16f9c3b4f 100644
> --- a/arch/arm64/boot/dts/mediatek/mt8183-kukui-krane-sku176.dts
> +++ b/arch/arm64/boot/dts/mediatek/mt8183-kukui-krane-sku176.dts
> @@ -16,3 +16,8 @@ / {
> model = "MediaTek krane sku176 board";
> compatible = "google,krane-sku176", "google,krane", "mediatek,mt8183";
> };
> +
> +&panel {
> + status = "okay";
> + compatible = "boe,tv101wum-nl6";
> +};
> diff --git a/arch/arm64/boot/dts/mediatek/mt8183-kukui.dtsi b/arch/arm64/boot/dts/mediatek/mt8183-kukui.dtsi
> index bf2ad1294dd30..da1e947587074 100644
> --- a/arch/arm64/boot/dts/mediatek/mt8183-kukui.dtsi
> +++ b/arch/arm64/boot/dts/mediatek/mt8183-kukui.dtsi
> @@ -249,6 +249,36 @@ &cpu7 {
> proc-supply = <&mt6358_vproc11_reg>;
> };
>
> +&dsi0 {
> + status = "okay";
> + #address-cells = <1>;
> + #size-cells = <0>;
> + panel: panel@0 {
> + /* compatible will be set in board dts */
> + reg = <0>;
> + enable-gpios = <&pio 45 0>;
> + pinctrl-names = "default";
> + pinctrl-0 = <&panel_pins_default>;
> + avdd-supply = <&ppvarn_lcd>;
> + avee-supply = <&ppvarp_lcd>;
> + pp1800-supply = <&pp1800_lcd>;
> + backlight = <&backlight_lcd0>;
> + port {
> + panel_in: endpoint {
> + remote-endpoint = <&dsi_out>;
> + };
> + };
> + };
> +
> + ports {
> + port {
> + dsi_out: endpoint {
> + remote-endpoint = <&panel_in>;
> + };
> + };
> + };
> +};
> +
> &i2c0 {
> pinctrl-names = "default";
> pinctrl-0 = <&i2c0_pins>;
> @@ -290,6 +320,10 @@ &i2c6 {
> clock-frequency = <100000>;
> };
>
> +&mipi_tx0 {
> + status = "okay";
> +};
> +
> &mmc0 {
> status = "okay";
> pinctrl-names = "default", "state_uhs";
> @@ -547,6 +581,14 @@ pins_clk {
> };
> };
>
> + panel_pins_default: panel_pins_default {
> + panel_reset {
> + pinmux = <PINMUX_GPIO45__FUNC_GPIO45>;
> + output-low;
> + bias-pull-up;
> + };
> + };
> +
> pwm0_pin_default: pwm0_pin_default {
> pins1 {
> pinmux = <PINMUX_GPIO176__FUNC_GPIO176>;
>
_______________________________________________
Linux-mediatek mailing list
Linux-mediatek@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-mediatek
^ permalink raw reply [flat|nested] 21+ messages in thread
* Re: [PATCH v4 1/3] arm64: dts: mt8183: config dsi node
2021-01-13 11:03 ` Hsin-Yi Wang
(?)
@ 2021-01-31 14:54 ` Matthias Brugger
-1 siblings, 0 replies; 21+ messages in thread
From: Matthias Brugger @ 2021-01-31 14:54 UTC (permalink / raw)
To: Hsin-Yi Wang, linux-arm-kernel
Cc: Rob Herring, Enric Balletbo i Serra, Nicolas Boichat, devicetree,
linux-mediatek, linux-kernel
On 13/01/2021 12:03, Hsin-Yi Wang wrote:
> Config dsi node for mt8183 kukui. Set panel and ports.
>
> Several kukui boards share the same panel property and only compatible
> is different. So compatible will be set in board dts for comparison
> convenience.
>
> Signed-off-by: Hsin-Yi Wang <hsinyi@chromium.org>
> Reviewed-by: Nicolas Boichat <drinkcat@chromium.org>
> ---
Whole series applied to v5.11-next/dts64
Thanks!
> change:
> v4: add backlight and enable mipi_tx0
> ---
> .../mediatek/mt8183-kukui-krane-sku176.dts | 5 +++
> .../arm64/boot/dts/mediatek/mt8183-kukui.dtsi | 42 +++++++++++++++++++
> 2 files changed, 47 insertions(+)
>
> diff --git a/arch/arm64/boot/dts/mediatek/mt8183-kukui-krane-sku176.dts b/arch/arm64/boot/dts/mediatek/mt8183-kukui-krane-sku176.dts
> index 47113e275cb52..721d16f9c3b4f 100644
> --- a/arch/arm64/boot/dts/mediatek/mt8183-kukui-krane-sku176.dts
> +++ b/arch/arm64/boot/dts/mediatek/mt8183-kukui-krane-sku176.dts
> @@ -16,3 +16,8 @@ / {
> model = "MediaTek krane sku176 board";
> compatible = "google,krane-sku176", "google,krane", "mediatek,mt8183";
> };
> +
> +&panel {
> + status = "okay";
> + compatible = "boe,tv101wum-nl6";
> +};
> diff --git a/arch/arm64/boot/dts/mediatek/mt8183-kukui.dtsi b/arch/arm64/boot/dts/mediatek/mt8183-kukui.dtsi
> index bf2ad1294dd30..da1e947587074 100644
> --- a/arch/arm64/boot/dts/mediatek/mt8183-kukui.dtsi
> +++ b/arch/arm64/boot/dts/mediatek/mt8183-kukui.dtsi
> @@ -249,6 +249,36 @@ &cpu7 {
> proc-supply = <&mt6358_vproc11_reg>;
> };
>
> +&dsi0 {
> + status = "okay";
> + #address-cells = <1>;
> + #size-cells = <0>;
> + panel: panel@0 {
> + /* compatible will be set in board dts */
> + reg = <0>;
> + enable-gpios = <&pio 45 0>;
> + pinctrl-names = "default";
> + pinctrl-0 = <&panel_pins_default>;
> + avdd-supply = <&ppvarn_lcd>;
> + avee-supply = <&ppvarp_lcd>;
> + pp1800-supply = <&pp1800_lcd>;
> + backlight = <&backlight_lcd0>;
> + port {
> + panel_in: endpoint {
> + remote-endpoint = <&dsi_out>;
> + };
> + };
> + };
> +
> + ports {
> + port {
> + dsi_out: endpoint {
> + remote-endpoint = <&panel_in>;
> + };
> + };
> + };
> +};
> +
> &i2c0 {
> pinctrl-names = "default";
> pinctrl-0 = <&i2c0_pins>;
> @@ -290,6 +320,10 @@ &i2c6 {
> clock-frequency = <100000>;
> };
>
> +&mipi_tx0 {
> + status = "okay";
> +};
> +
> &mmc0 {
> status = "okay";
> pinctrl-names = "default", "state_uhs";
> @@ -547,6 +581,14 @@ pins_clk {
> };
> };
>
> + panel_pins_default: panel_pins_default {
> + panel_reset {
> + pinmux = <PINMUX_GPIO45__FUNC_GPIO45>;
> + output-low;
> + bias-pull-up;
> + };
> + };
> +
> pwm0_pin_default: pwm0_pin_default {
> pins1 {
> pinmux = <PINMUX_GPIO176__FUNC_GPIO176>;
>
^ permalink raw reply [flat|nested] 21+ messages in thread* Re: [PATCH v4 1/3] arm64: dts: mt8183: config dsi node
@ 2021-01-31 14:54 ` Matthias Brugger
0 siblings, 0 replies; 21+ messages in thread
From: Matthias Brugger @ 2021-01-31 14:54 UTC (permalink / raw)
To: Hsin-Yi Wang, linux-arm-kernel
Cc: devicetree, Nicolas Boichat, linux-kernel, Rob Herring,
linux-mediatek, Enric Balletbo i Serra
On 13/01/2021 12:03, Hsin-Yi Wang wrote:
> Config dsi node for mt8183 kukui. Set panel and ports.
>
> Several kukui boards share the same panel property and only compatible
> is different. So compatible will be set in board dts for comparison
> convenience.
>
> Signed-off-by: Hsin-Yi Wang <hsinyi@chromium.org>
> Reviewed-by: Nicolas Boichat <drinkcat@chromium.org>
> ---
Whole series applied to v5.11-next/dts64
Thanks!
> change:
> v4: add backlight and enable mipi_tx0
> ---
> .../mediatek/mt8183-kukui-krane-sku176.dts | 5 +++
> .../arm64/boot/dts/mediatek/mt8183-kukui.dtsi | 42 +++++++++++++++++++
> 2 files changed, 47 insertions(+)
>
> diff --git a/arch/arm64/boot/dts/mediatek/mt8183-kukui-krane-sku176.dts b/arch/arm64/boot/dts/mediatek/mt8183-kukui-krane-sku176.dts
> index 47113e275cb52..721d16f9c3b4f 100644
> --- a/arch/arm64/boot/dts/mediatek/mt8183-kukui-krane-sku176.dts
> +++ b/arch/arm64/boot/dts/mediatek/mt8183-kukui-krane-sku176.dts
> @@ -16,3 +16,8 @@ / {
> model = "MediaTek krane sku176 board";
> compatible = "google,krane-sku176", "google,krane", "mediatek,mt8183";
> };
> +
> +&panel {
> + status = "okay";
> + compatible = "boe,tv101wum-nl6";
> +};
> diff --git a/arch/arm64/boot/dts/mediatek/mt8183-kukui.dtsi b/arch/arm64/boot/dts/mediatek/mt8183-kukui.dtsi
> index bf2ad1294dd30..da1e947587074 100644
> --- a/arch/arm64/boot/dts/mediatek/mt8183-kukui.dtsi
> +++ b/arch/arm64/boot/dts/mediatek/mt8183-kukui.dtsi
> @@ -249,6 +249,36 @@ &cpu7 {
> proc-supply = <&mt6358_vproc11_reg>;
> };
>
> +&dsi0 {
> + status = "okay";
> + #address-cells = <1>;
> + #size-cells = <0>;
> + panel: panel@0 {
> + /* compatible will be set in board dts */
> + reg = <0>;
> + enable-gpios = <&pio 45 0>;
> + pinctrl-names = "default";
> + pinctrl-0 = <&panel_pins_default>;
> + avdd-supply = <&ppvarn_lcd>;
> + avee-supply = <&ppvarp_lcd>;
> + pp1800-supply = <&pp1800_lcd>;
> + backlight = <&backlight_lcd0>;
> + port {
> + panel_in: endpoint {
> + remote-endpoint = <&dsi_out>;
> + };
> + };
> + };
> +
> + ports {
> + port {
> + dsi_out: endpoint {
> + remote-endpoint = <&panel_in>;
> + };
> + };
> + };
> +};
> +
> &i2c0 {
> pinctrl-names = "default";
> pinctrl-0 = <&i2c0_pins>;
> @@ -290,6 +320,10 @@ &i2c6 {
> clock-frequency = <100000>;
> };
>
> +&mipi_tx0 {
> + status = "okay";
> +};
> +
> &mmc0 {
> status = "okay";
> pinctrl-names = "default", "state_uhs";
> @@ -547,6 +581,14 @@ pins_clk {
> };
> };
>
> + panel_pins_default: panel_pins_default {
> + panel_reset {
> + pinmux = <PINMUX_GPIO45__FUNC_GPIO45>;
> + output-low;
> + bias-pull-up;
> + };
> + };
> +
> pwm0_pin_default: pwm0_pin_default {
> pins1 {
> pinmux = <PINMUX_GPIO176__FUNC_GPIO176>;
>
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply [flat|nested] 21+ messages in thread* Re: [PATCH v4 1/3] arm64: dts: mt8183: config dsi node
@ 2021-01-31 14:54 ` Matthias Brugger
0 siblings, 0 replies; 21+ messages in thread
From: Matthias Brugger @ 2021-01-31 14:54 UTC (permalink / raw)
To: Hsin-Yi Wang, linux-arm-kernel
Cc: devicetree, Nicolas Boichat, linux-kernel, Rob Herring,
linux-mediatek, Enric Balletbo i Serra
On 13/01/2021 12:03, Hsin-Yi Wang wrote:
> Config dsi node for mt8183 kukui. Set panel and ports.
>
> Several kukui boards share the same panel property and only compatible
> is different. So compatible will be set in board dts for comparison
> convenience.
>
> Signed-off-by: Hsin-Yi Wang <hsinyi@chromium.org>
> Reviewed-by: Nicolas Boichat <drinkcat@chromium.org>
> ---
Whole series applied to v5.11-next/dts64
Thanks!
> change:
> v4: add backlight and enable mipi_tx0
> ---
> .../mediatek/mt8183-kukui-krane-sku176.dts | 5 +++
> .../arm64/boot/dts/mediatek/mt8183-kukui.dtsi | 42 +++++++++++++++++++
> 2 files changed, 47 insertions(+)
>
> diff --git a/arch/arm64/boot/dts/mediatek/mt8183-kukui-krane-sku176.dts b/arch/arm64/boot/dts/mediatek/mt8183-kukui-krane-sku176.dts
> index 47113e275cb52..721d16f9c3b4f 100644
> --- a/arch/arm64/boot/dts/mediatek/mt8183-kukui-krane-sku176.dts
> +++ b/arch/arm64/boot/dts/mediatek/mt8183-kukui-krane-sku176.dts
> @@ -16,3 +16,8 @@ / {
> model = "MediaTek krane sku176 board";
> compatible = "google,krane-sku176", "google,krane", "mediatek,mt8183";
> };
> +
> +&panel {
> + status = "okay";
> + compatible = "boe,tv101wum-nl6";
> +};
> diff --git a/arch/arm64/boot/dts/mediatek/mt8183-kukui.dtsi b/arch/arm64/boot/dts/mediatek/mt8183-kukui.dtsi
> index bf2ad1294dd30..da1e947587074 100644
> --- a/arch/arm64/boot/dts/mediatek/mt8183-kukui.dtsi
> +++ b/arch/arm64/boot/dts/mediatek/mt8183-kukui.dtsi
> @@ -249,6 +249,36 @@ &cpu7 {
> proc-supply = <&mt6358_vproc11_reg>;
> };
>
> +&dsi0 {
> + status = "okay";
> + #address-cells = <1>;
> + #size-cells = <0>;
> + panel: panel@0 {
> + /* compatible will be set in board dts */
> + reg = <0>;
> + enable-gpios = <&pio 45 0>;
> + pinctrl-names = "default";
> + pinctrl-0 = <&panel_pins_default>;
> + avdd-supply = <&ppvarn_lcd>;
> + avee-supply = <&ppvarp_lcd>;
> + pp1800-supply = <&pp1800_lcd>;
> + backlight = <&backlight_lcd0>;
> + port {
> + panel_in: endpoint {
> + remote-endpoint = <&dsi_out>;
> + };
> + };
> + };
> +
> + ports {
> + port {
> + dsi_out: endpoint {
> + remote-endpoint = <&panel_in>;
> + };
> + };
> + };
> +};
> +
> &i2c0 {
> pinctrl-names = "default";
> pinctrl-0 = <&i2c0_pins>;
> @@ -290,6 +320,10 @@ &i2c6 {
> clock-frequency = <100000>;
> };
>
> +&mipi_tx0 {
> + status = "okay";
> +};
> +
> &mmc0 {
> status = "okay";
> pinctrl-names = "default", "state_uhs";
> @@ -547,6 +581,14 @@ pins_clk {
> };
> };
>
> + panel_pins_default: panel_pins_default {
> + panel_reset {
> + pinmux = <PINMUX_GPIO45__FUNC_GPIO45>;
> + output-low;
> + bias-pull-up;
> + };
> + };
> +
> pwm0_pin_default: pwm0_pin_default {
> pins1 {
> pinmux = <PINMUX_GPIO176__FUNC_GPIO176>;
>
_______________________________________________
Linux-mediatek mailing list
Linux-mediatek@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-mediatek
^ permalink raw reply [flat|nested] 21+ messages in thread