[PATCH 5.4 00/62] 5.4.90-rc1 review

[PATCH 5.4 00/62] 5.4.90-rc1 review

[Greg Kroah-Hartman]

This is the start of the stable review cycle for the 5.4.90 release.
There are 62 patches in this series, all will be posted as a response
to this one.  If anyone has any issues with these being applied, please
let me know.

Responses should be made by Sun, 17 Jan 2021 12:19:42 +0000.
Anything received after that time might be too late.

The whole patch series can be found in one patch at:
	https://www.kernel.org/pub/linux/kernel/v5.x/stable-review/patch-5.4.90-rc1.gz
or in the git tree and branch at:
	git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-5.4.y
and the diffstat can be found below.

thanks,

greg k-h

-------------
Pseudo-Shortlog of commits:

Greg Kroah-Hartman <gregkh@linuxfoundation.org>
    Linux 5.4.90-rc1

Dan Carpenter <dan.carpenter@oracle.com>
    regmap: debugfs: Fix a reversed if statement in regmap_debugfs_init()

Vasily Averin <vvs@virtuozzo.com>
    net: drop bogus skb with CHECKSUM_PARTIAL and offset beyond end of trimmed packet

Ming Lei <ming.lei@redhat.com>
    block: fix use-after-free in disk_part_iter_next

Marc Zyngier <maz@kernel.org>
    KVM: arm64: Don't access PMCR_EL0 when no PMU is available

Stefan Chulski <stefanc@marvell.com>
    net: mvpp2: disable force link UP during port init procedure

Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
    regulator: qcom-rpmh-regulator: correct hfsmps515 definition

Arnd Bergmann <arnd@arndb.de>
    wan: ds26522: select CONFIG_BITREVERSE

Xiaolei Wang <xiaolei.wang@windriver.com>
    regmap: debugfs: Fix a memory leak when calling regmap_attach_dev

Dinghao Liu <dinghao.liu@zju.edu.cn>
    net/mlx5e: Fix two double free cases

Dinghao Liu <dinghao.liu@zju.edu.cn>
    net/mlx5e: Fix memleak in mlx5e_create_l2_table_groups

Alan Maguire <alan.maguire@oracle.com>
    bpftool: Fix compilation failure for net.o with older glibc

Dinghao Liu <dinghao.liu@zju.edu.cn>
    iommu/intel: Fix memleak in intel_irq_remapping_alloc

Arnd Bergmann <arnd@arndb.de>
    lightnvm: select CONFIG_CRC32

Arnd Bergmann <arnd@arndb.de>
    block: rsxx: select CONFIG_CRC32

Arnd Bergmann <arnd@arndb.de>
    wil6210: select CONFIG_CRC32

Arnd Bergmann <arnd@arndb.de>
    qed: select CONFIG_CRC32

Shravya Kumbham <shravya.kumbham@xilinx.com>
    dmaengine: xilinx_dma: fix mixed_enum_type coverity warning

Shravya Kumbham <shravya.kumbham@xilinx.com>
    dmaengine: xilinx_dma: fix incompatible param warning in _child_probe()

Shravya Kumbham <shravya.kumbham@xilinx.com>
    dmaengine: xilinx_dma: check dma_async_device_register return value

Christophe JAILLET <christophe.jaillet@wanadoo.fr>
    dmaengine: mediatek: mtk-hsdma: Fix a resource leak in the error handling path of the probe function

Hans de Goede <hdegoede@redhat.com>
    i2c: i801: Fix the i2c-mux gpiod_lookup_table not being properly terminated

Roman Guskov <rguskov@dh-electronics.com>
    spi: stm32: FIFO threshold level - fix align packet size

Douglas Anderson <dianders@chromium.org>
    spi: spi-geni-qcom: Fix geni_spi_isr() NULL dereference in timeout case

Colin Ian King <colin.king@canonical.com>
    cpufreq: powernow-k8: pass policy rather than use cpufreq_cpu_get()

Arnd Bergmann <arnd@arndb.de>
    can: kvaser_pciefd: select CONFIG_CRC32

Marc Kleine-Budde <mkl@pengutronix.de>
    can: m_can: m_can_class_unregister(): remove erroneous m_can_clk_stop()

Marc Kleine-Budde <mkl@pengutronix.de>
    can: tcan4x5x: fix bittiming const, use common bittiming from m_can driver

Dan Carpenter <dan.carpenter@oracle.com>
    dmaengine: dw-edma: Fix use after free in dw_edma_alloc_chunk()

Chunyan Zhang <chunyan.zhang@unisoc.com>
    i2c: sprd: use a specific timeout to avoid system hang up issue

Andreas Kemnade <andreas@kemnade.info>
    ARM: OMAP2+: omap_device: fix idling of devices during probe

Ping Cheng <pinglinux@gmail.com>
    HID: wacom: Fix memory leakage caused by kfifo_alloc

Lorenzo Bianconi <lorenzo@kernel.org>
    iio: imu: st_lsm6dsx: fix edge-trigger interrupts

Nick Desaulniers <ndesaulniers@google.com>
    vmlinux.lds.h: Add PGO and AutoFDO input sections

Valdis Kletnieks <valdis.kletnieks@vt.edu>
    exfat: Month timestamp metadata accidentally incremented

Fenghua Yu <fenghua.yu@intel.com>
    x86/resctrl: Don't move a task to the same resource group

Fenghua Yu <fenghua.yu@intel.com>
    x86/resctrl: Use an IPI instead of task_work_add() to update PQR_ASSOC MSR

Ayush Sawal <ayush.sawal@chelsio.com>
    chtls: Fix chtls resources release sequence

Ayush Sawal <ayush.sawal@chelsio.com>
    chtls: Added a check to avoid NULL pointer dereference

Ayush Sawal <ayush.sawal@chelsio.com>
    chtls: Replace skb_dequeue with skb_peek

Ayush Sawal <ayush.sawal@chelsio.com>
    chtls: Fix panic when route to peer not configured

Ayush Sawal <ayush.sawal@chelsio.com>
    chtls: Remove invalid set_tcb call

Ayush Sawal <ayush.sawal@chelsio.com>
    chtls: Fix hardware tid leak

Aya Levin <ayal@nvidia.com>
    net/mlx5e: ethtool, Fix restriction of autoneg with 56G

Mark Zhang <markzhang@nvidia.com>
    net/mlx5: Use port_num 1 instead of 0 when delete a RoCE address

Aleksander Jan Bajkowski <olek2@wp.pl>
    net: dsa: lantiq_gswip: Exclude RMII from modes that report 1 GbE

Julian Wiedmann <jwi@linux.ibm.com>
    s390/qeth: fix L2 header access in qeth_l3_osa_features_check()

Ido Schimmel <idosch@nvidia.com>
    nexthop: Unlink nexthop group entry in error path

Ido Schimmel <idosch@nvidia.com>
    nexthop: Fix off-by-one error in error path

Colin Ian King <colin.king@canonical.com>
    octeontx2-af: fix memory leak of lmac and lmac->name

Florian Westphal <fw@strlen.de>
    net: ip: always refragment ip defragmented packets

Florian Westphal <fw@strlen.de>
    net: fix pmtu check in nopmtudisc mode

Sean Tranchetti <stranche@codeaurora.org>
    tools: selftests: add test for changing routes with PTMU exceptions

Sean Tranchetti <stranche@codeaurora.org>
    net: ipv6: fib: flush exceptions when purging route

Christophe JAILLET <christophe.jaillet@wanadoo.fr>
    net/sonic: Fix some resource leaks in error handling paths

Jakub Kicinski <kuba@kernel.org>
    net: vlan: avoid leaks on register_vlan_dev() failures

Samuel Holland <samuel@sholland.org>
    net: stmmac: dwmac-sun8i: Balance internal PHY power

Samuel Holland <samuel@sholland.org>
    net: stmmac: dwmac-sun8i: Balance internal PHY resource references

Yonglong Liu <liuyonglong@huawei.com>
    net: hns3: fix a phy loopback fail issue

Yufeng Mo <moyufeng@huawei.com>
    net: hns3: fix the number of queues actually used by ARQ

Jouni K. Seppänen <jks@iki.fi>
    net: cdc_ncm: correct overhead in delayed_ndp_size

Matthew Rosato <mjrosato@linux.ibm.com>
    vfio iommu: Add dma available capability

Jiri Slaby <jslaby@suse.cz>
    x86/asm/32: Add ENDs to some functions and relabel with SYM_CODE_*


-------------

Diffstat:

 Makefile                                           |   4 +-
 arch/arm/mach-omap2/omap_device.c                  |   8 +-
 arch/arm64/kvm/sys_regs.c                          |   4 +
 arch/x86/entry/entry_32.S                          |   3 +-
 arch/x86/kernel/acpi/wakeup_32.S                   |   7 +-
 arch/x86/kernel/cpu/resctrl/rdtgroup.c             | 113 +++++++++------------
 arch/x86/kernel/ftrace_32.S                        |   3 +-
 arch/x86/kernel/head_32.S                          |   3 +-
 arch/x86/power/hibernate_asm_32.S                  |   6 +-
 arch/x86/realmode/rm/trampoline_32.S               |   6 +-
 arch/x86/xen/xen-asm_32.S                          |   7 +-
 block/genhd.c                                      |   9 +-
 drivers/base/regmap/regmap-debugfs.c               |   9 +-
 drivers/block/Kconfig                              |   1 +
 drivers/cpufreq/powernow-k8.c                      |   9 +-
 drivers/crypto/chelsio/chtls/chtls_cm.c            |  68 +++++--------
 drivers/dma/dw-edma/dw-edma-core.c                 |   4 +-
 drivers/dma/mediatek/mtk-hsdma.c                   |   1 +
 drivers/dma/xilinx/xilinx_dma.c                    |  11 +-
 drivers/hid/wacom_sys.c                            |  35 ++++++-
 drivers/i2c/busses/i2c-i801.c                      |   2 +-
 drivers/i2c/busses/i2c-sprd.c                      |   8 +-
 drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_buffer.c     |  26 ++++-
 drivers/iommu/intel_irq_remapping.c                |   2 +
 drivers/lightnvm/Kconfig                           |   1 +
 drivers/net/can/Kconfig                            |   1 +
 drivers/net/can/m_can/m_can.c                      |   2 -
 drivers/net/can/m_can/tcan4x5x.c                   |  26 -----
 drivers/net/dsa/lantiq_gswip.c                     |   7 +-
 drivers/net/ethernet/hisilicon/hns3/hclge_mbx.h    |   4 +-
 .../ethernet/hisilicon/hns3/hns3pf/hclge_main.c    |   3 +-
 drivers/net/ethernet/marvell/mvpp2/mvpp2_main.c    |  14 ++-
 drivers/net/ethernet/marvell/octeontx2/af/cgx.c    |  14 ++-
 .../net/ethernet/mellanox/mlx5/core/en_ethtool.c   |  24 +++--
 drivers/net/ethernet/mellanox/mlx5/core/en_fs.c    |   3 +
 drivers/net/ethernet/mellanox/mlx5/core/rdma.c     |   2 +-
 drivers/net/ethernet/natsemi/macsonic.c            |  12 ++-
 drivers/net/ethernet/natsemi/xtsonic.c             |   7 +-
 drivers/net/ethernet/qlogic/Kconfig                |   1 +
 drivers/net/ethernet/stmicro/stmmac/dwmac-sun8i.c  |  58 ++++++++---
 drivers/net/usb/cdc_ncm.c                          |   8 +-
 drivers/net/wan/Kconfig                            |   1 +
 drivers/net/wireless/ath/wil6210/Kconfig           |   1 +
 drivers/regulator/qcom-rpmh-regulator.c            |   2 +-
 drivers/s390/net/qeth_l3_main.c                    |   2 +-
 drivers/spi/spi-geni-qcom.c                        |  14 +++
 drivers/spi/spi-stm32.c                            |   4 +-
 drivers/staging/exfat/exfat_super.c                |   2 +-
 drivers/vfio/vfio_iommu_type1.c                    |  22 ++++
 include/asm-generic/vmlinux.lds.h                  |   5 +-
 include/uapi/linux/vfio.h                          |  15 +++
 net/8021q/vlan.c                                   |   3 +-
 net/core/skbuff.c                                  |   6 ++
 net/ipv4/ip_output.c                               |   2 +-
 net/ipv4/ip_tunnel.c                               |  11 +-
 net/ipv4/nexthop.c                                 |   4 +-
 net/ipv6/ip6_fib.c                                 |   5 +-
 tools/bpf/bpftool/net.c                            |   1 -
 tools/testing/selftests/net/pmtu.sh                |  71 ++++++++++++-
 59 files changed, 468 insertions(+), 239 deletions(-)

[PATCH 5.4 01/62] x86/asm/32: Add ENDs to some functions and relabel with SYM_CODE_*

[Greg Kroah-Hartman]

From: Jiri Slaby <jslaby@suse.cz>

commit 78762b0e79bc1dd01347be061abdf505202152c9 upstream.

All these are functions which are invoked from elsewhere but they are
not typical C functions. So annotate them using the new SYM_CODE_START.
All these were not balanced with any END, so mark their ends by
SYM_CODE_END, appropriately.

Signed-off-by: Jiri Slaby <jslaby@suse.cz>
Signed-off-by: Borislav Petkov <bp@suse.de>
Reviewed-by: Boris Ostrovsky <boris.ostrovsky@oracle.com> [xen bits]
Reviewed-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> [hibernate]
Cc: Andy Lutomirski <luto@kernel.org>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Juergen Gross <jgross@suse.com>
Cc: Len Brown <len.brown@intel.com>
Cc: linux-arch@vger.kernel.org
Cc: linux-pm@vger.kernel.org
Cc: Pavel Machek <pavel@ucw.cz>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Pingfan Liu <kernelfans@gmail.com>
Cc: Stefano Stabellini <sstabellini@kernel.org>
Cc: "Steven Rostedt (VMware)" <rostedt@goodmis.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: x86-ml <x86@kernel.org>
Cc: xen-devel@lists.xenproject.org
Link: https://lkml.kernel.org/r/20191011115108.12392-26-jslaby@suse.cz
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/x86/entry/entry_32.S            | 3 ++-
 arch/x86/kernel/acpi/wakeup_32.S     | 7 ++++---
 arch/x86/kernel/ftrace_32.S          | 3 ++-
 arch/x86/kernel/head_32.S            | 3 ++-
 arch/x86/power/hibernate_asm_32.S    | 6 ++++--
 arch/x86/realmode/rm/trampoline_32.S | 6 ++++--
 arch/x86/xen/xen-asm_32.S            | 7 ++++---
 7 files changed, 22 insertions(+), 13 deletions(-)

diff --git a/arch/x86/entry/entry_32.S b/arch/x86/entry/entry_32.S
index 390edb7638265..bde3e0f85425f 100644
--- a/arch/x86/entry/entry_32.S
+++ b/arch/x86/entry/entry_32.S
@@ -869,9 +869,10 @@ GLOBAL(__begin_SYSENTER_singlestep_region)
  * Xen doesn't set %esp to be precisely what the normal SYSENTER
  * entry point expects, so fix it up before using the normal path.
  */
-ENTRY(xen_sysenter_target)
+SYM_CODE_START(xen_sysenter_target)
 	addl	$5*4, %esp			/* remove xen-provided frame */
 	jmp	.Lsysenter_past_esp
+SYM_CODE_END(xen_sysenter_target)
 #endif
 
 /*
diff --git a/arch/x86/kernel/acpi/wakeup_32.S b/arch/x86/kernel/acpi/wakeup_32.S
index e95e95960156b..5b076cb79f5fb 100644
--- a/arch/x86/kernel/acpi/wakeup_32.S
+++ b/arch/x86/kernel/acpi/wakeup_32.S
@@ -9,8 +9,7 @@
 	.code32
 	ALIGN
 
-ENTRY(wakeup_pmode_return)
-wakeup_pmode_return:
+SYM_CODE_START(wakeup_pmode_return)
 	movw	$__KERNEL_DS, %ax
 	movw	%ax, %ss
 	movw	%ax, %fs
@@ -39,6 +38,7 @@ wakeup_pmode_return:
 	# jump to place where we left off
 	movl	saved_eip, %eax
 	jmp	*%eax
+SYM_CODE_END(wakeup_pmode_return)
 
 bogus_magic:
 	jmp	bogus_magic
@@ -72,7 +72,7 @@ restore_registers:
 	popfl
 	ret
 
-ENTRY(do_suspend_lowlevel)
+SYM_CODE_START(do_suspend_lowlevel)
 	call	save_processor_state
 	call	save_registers
 	pushl	$3
@@ -87,6 +87,7 @@ ret_point:
 	call	restore_registers
 	call	restore_processor_state
 	ret
+SYM_CODE_END(do_suspend_lowlevel)
 
 .data
 ALIGN
diff --git a/arch/x86/kernel/ftrace_32.S b/arch/x86/kernel/ftrace_32.S
index 073aab525d800..2cc0303522c99 100644
--- a/arch/x86/kernel/ftrace_32.S
+++ b/arch/x86/kernel/ftrace_32.S
@@ -89,7 +89,7 @@ WEAK(ftrace_stub)
 	ret
 END(ftrace_caller)
 
-ENTRY(ftrace_regs_caller)
+SYM_CODE_START(ftrace_regs_caller)
 	/*
 	 * We're here from an mcount/fentry CALL, and the stack frame looks like:
 	 *
@@ -163,6 +163,7 @@ GLOBAL(ftrace_regs_call)
 	popl	%eax
 
 	jmp	.Lftrace_ret
+SYM_CODE_END(ftrace_regs_caller)
 
 #ifdef CONFIG_FUNCTION_GRAPH_TRACER
 ENTRY(ftrace_graph_caller)
diff --git a/arch/x86/kernel/head_32.S b/arch/x86/kernel/head_32.S
index 2e6a0676c1f43..11a5d5ade52ce 100644
--- a/arch/x86/kernel/head_32.S
+++ b/arch/x86/kernel/head_32.S
@@ -64,7 +64,7 @@ RESERVE_BRK(pagetables, INIT_MAP_SIZE)
  * can.
  */
 __HEAD
-ENTRY(startup_32)
+SYM_CODE_START(startup_32)
 	movl pa(initial_stack),%ecx
 	
 	/* test KEEP_SEGMENTS flag to see if the bootloader is asking
@@ -172,6 +172,7 @@ num_subarch_entries = (. - subarch_entries) / 4
 #else
 	jmp .Ldefault_entry
 #endif /* CONFIG_PARAVIRT */
+SYM_CODE_END(startup_32)
 
 #ifdef CONFIG_HOTPLUG_CPU
 /*
diff --git a/arch/x86/power/hibernate_asm_32.S b/arch/x86/power/hibernate_asm_32.S
index 6fe383002125f..a19ed3d231853 100644
--- a/arch/x86/power/hibernate_asm_32.S
+++ b/arch/x86/power/hibernate_asm_32.S
@@ -35,7 +35,7 @@ ENTRY(swsusp_arch_suspend)
 	ret
 ENDPROC(swsusp_arch_suspend)
 
-ENTRY(restore_image)
+SYM_CODE_START(restore_image)
 	/* prepare to jump to the image kernel */
 	movl	restore_jump_address, %ebx
 	movl	restore_cr3, %ebp
@@ -45,9 +45,10 @@ ENTRY(restore_image)
 	/* jump to relocated restore code */
 	movl	relocated_restore_code, %eax
 	jmpl	*%eax
+SYM_CODE_END(restore_image)
 
 /* code below has been relocated to a safe page */
-ENTRY(core_restore_code)
+SYM_CODE_START(core_restore_code)
 	movl	temp_pgt, %eax
 	movl	%eax, %cr3
 
@@ -77,6 +78,7 @@ copy_loop:
 
 done:
 	jmpl	*%ebx
+SYM_CODE_END(core_restore_code)
 
 	/* code below belongs to the image kernel */
 	.align PAGE_SIZE
diff --git a/arch/x86/realmode/rm/trampoline_32.S b/arch/x86/realmode/rm/trampoline_32.S
index 1868b158480d4..3a0ef0d577344 100644
--- a/arch/x86/realmode/rm/trampoline_32.S
+++ b/arch/x86/realmode/rm/trampoline_32.S
@@ -29,7 +29,7 @@
 	.code16
 
 	.balign	PAGE_SIZE
-ENTRY(trampoline_start)
+SYM_CODE_START(trampoline_start)
 	wbinvd			# Needed for NUMA-Q should be harmless for others
 
 	LJMPW_RM(1f)
@@ -54,11 +54,13 @@ ENTRY(trampoline_start)
 	lmsw	%dx			# into protected mode
 
 	ljmpl	$__BOOT_CS, $pa_startup_32
+SYM_CODE_END(trampoline_start)
 
 	.section ".text32","ax"
 	.code32
-ENTRY(startup_32)			# note: also used from wakeup_asm.S
+SYM_CODE_START(startup_32)			# note: also used from wakeup_asm.S
 	jmp	*%eax
+SYM_CODE_END(startup_32)
 
 	.bss
 	.balign 8
diff --git a/arch/x86/xen/xen-asm_32.S b/arch/x86/xen/xen-asm_32.S
index cd177772fe4d5..2712e91553063 100644
--- a/arch/x86/xen/xen-asm_32.S
+++ b/arch/x86/xen/xen-asm_32.S
@@ -56,7 +56,7 @@
 	_ASM_EXTABLE(1b,2b)
 .endm
 
-ENTRY(xen_iret)
+SYM_CODE_START(xen_iret)
 	/* test eflags for special cases */
 	testl $(X86_EFLAGS_VM | XEN_EFLAGS_NMI), 8(%esp)
 	jnz hyper_iret
@@ -122,6 +122,7 @@ xen_iret_end_crit:
 hyper_iret:
 	/* put this out of line since its very rarely used */
 	jmp hypercall_page + __HYPERVISOR_iret * 32
+SYM_CODE_END(xen_iret)
 
 	.globl xen_iret_start_crit, xen_iret_end_crit
 
@@ -152,7 +153,7 @@ hyper_iret:
  * The only caveat is that if the outer eax hasn't been restored yet (i.e.
  * it's still on stack), we need to restore its value here.
  */
-ENTRY(xen_iret_crit_fixup)
+SYM_CODE_START(xen_iret_crit_fixup)
 	/*
 	 * Paranoia: Make sure we're really coming from kernel space.
 	 * One could imagine a case where userspace jumps into the
@@ -179,4 +180,4 @@ ENTRY(xen_iret_crit_fixup)
 
 2:
 	ret
-END(xen_iret_crit_fixup)
+SYM_CODE_END(xen_iret_crit_fixup)
-- 
2.27.0

[PATCH 5.4 02/62] vfio iommu: Add dma available capability

[Greg Kroah-Hartman]

From: Matthew Rosato <mjrosato@linux.ibm.com>

[ Upstream commit 7d6e1329652ed971d1b6e0e7bea66fba5044e271 ]

The following functional changes were needed for backport:
- vfio_iommu_type1_get_info doesn't exist, call
  vfio_iommu_dma_avail_build_caps from vfio_iommu_type1_ioctl.
- As further fallout from this, vfio_iommu_dma_avail_build_caps must
  acquire and release the iommu mutex lock.  To do so, the return value is
  stored in a local variable as in vfio_iommu_iova_build_caps.

Upstream commit description:
Commit 492855939bdb ("vfio/type1: Limit DMA mappings per container")
added the ability to limit the number of memory backed DMA mappings.
However on s390x, when lazy mapping is in use, we use a very large
number of concurrent mappings.  Let's provide the current allowable
number of DMA mappings to userspace via the IOMMU info chain so that
userspace can take appropriate mitigation.

Signed-off-by: Matthew Rosato <mjrosato@linux.ibm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/vfio/vfio_iommu_type1.c | 22 ++++++++++++++++++++++
 include/uapi/linux/vfio.h       | 15 +++++++++++++++
 2 files changed, 37 insertions(+)

diff --git a/drivers/vfio/vfio_iommu_type1.c b/drivers/vfio/vfio_iommu_type1.c
index 3b31e83a92155..bc6ba41686fa3 100644
--- a/drivers/vfio/vfio_iommu_type1.c
+++ b/drivers/vfio/vfio_iommu_type1.c
@@ -2303,6 +2303,24 @@ static int vfio_iommu_iova_build_caps(struct vfio_iommu *iommu,
 	return ret;
 }
 
+static int vfio_iommu_dma_avail_build_caps(struct vfio_iommu *iommu,
+					   struct vfio_info_cap *caps)
+{
+	struct vfio_iommu_type1_info_dma_avail cap_dma_avail;
+	int ret;
+
+	mutex_lock(&iommu->lock);
+	cap_dma_avail.header.id = VFIO_IOMMU_TYPE1_INFO_DMA_AVAIL;
+	cap_dma_avail.header.version = 1;
+
+	cap_dma_avail.avail = iommu->dma_avail;
+
+	ret = vfio_info_add_capability(caps, &cap_dma_avail.header,
+				       sizeof(cap_dma_avail));
+	mutex_unlock(&iommu->lock);
+	return ret;
+}
+
 static long vfio_iommu_type1_ioctl(void *iommu_data,
 				   unsigned int cmd, unsigned long arg)
 {
@@ -2349,6 +2367,10 @@ static long vfio_iommu_type1_ioctl(void *iommu_data,
 		info.iova_pgsizes = vfio_pgsize_bitmap(iommu);
 
 		ret = vfio_iommu_iova_build_caps(iommu, &caps);
+
+		if (!ret)
+			ret = vfio_iommu_dma_avail_build_caps(iommu, &caps);
+
 		if (ret)
 			return ret;
 
diff --git a/include/uapi/linux/vfio.h b/include/uapi/linux/vfio.h
index 9e843a147ead0..cabc93118f9c8 100644
--- a/include/uapi/linux/vfio.h
+++ b/include/uapi/linux/vfio.h
@@ -748,6 +748,21 @@ struct vfio_iommu_type1_info_cap_iova_range {
 	struct	vfio_iova_range iova_ranges[];
 };
 
+/*
+ * The DMA available capability allows to report the current number of
+ * simultaneously outstanding DMA mappings that are allowed.
+ *
+ * The structure below defines version 1 of this capability.
+ *
+ * avail: specifies the current number of outstanding DMA mappings allowed.
+ */
+#define VFIO_IOMMU_TYPE1_INFO_DMA_AVAIL 3
+
+struct vfio_iommu_type1_info_dma_avail {
+	struct	vfio_info_cap_header header;
+	__u32	avail;
+};
+
 #define VFIO_IOMMU_GET_INFO _IO(VFIO_TYPE, VFIO_BASE + 12)
 
 /**
-- 
2.27.0

[PATCH 5.4 03/62] net: cdc_ncm: correct overhead in delayed_ndp_size

[Greg Kroah-Hartman]

[-- Warning: decoded text below may be mangled, UTF-8 assumed --]
[-- Attachment #1: Type: text/plain; charset=UTF-8, Size: 3552 bytes --]

From: "Jouni K. Seppänen" <jks@iki.fi>

[ Upstream commit 7a68d725e4ea384977445e0bcaed3d7de83ab5b3 ]

Aligning to tx_ndp_modulus is not sufficient because the next align
call can be cdc_ncm_align_tail, which can add up to ctx->tx_modulus +
ctx->tx_remainder - 1 bytes. This used to lead to occasional crashes
on a Huawei 909s-120 LTE module as follows:

- the condition marked /* if there is a remaining skb [...] */ is true
  so the swaps happen
- skb_out is set from ctx->tx_curr_skb
- skb_out->len is exactly 0x3f52
- ctx->tx_curr_size is 0x4000 and delayed_ndp_size is 0xac
  (note that the sum of skb_out->len and delayed_ndp_size is 0x3ffe)
- the for loop over n is executed once
- the cdc_ncm_align_tail call marked /* align beginning of next frame */
  increases skb_out->len to 0x3f56 (the sum is now 0x4002)
- the condition marked /* check if we had enough room left [...] */ is
  false so we break out of the loop
- the condition marked /* If requested, put NDP at end of frame. */ is
  true so the NDP is written into skb_out
- now skb_out->len is 0x4002, so padding_count is minus two interpreted
  as an unsigned number, which is used as the length argument to memset,
  leading to a crash with various symptoms but usually including

> Call Trace:
>  <IRQ>
>  cdc_ncm_fill_tx_frame+0x83a/0x970 [cdc_ncm]
>  cdc_mbim_tx_fixup+0x1d9/0x240 [cdc_mbim]
>  usbnet_start_xmit+0x5d/0x720 [usbnet]

The cdc_ncm_align_tail call first aligns on a ctx->tx_modulus
boundary (adding at most ctx->tx_modulus-1 bytes), then adds
ctx->tx_remainder bytes. Alternatively, the next alignment call can
occur in cdc_ncm_ndp16 or cdc_ncm_ndp32, in which case at most
ctx->tx_ndp_modulus-1 bytes are added.

A similar problem has occurred before, and the code is nontrivial to
reason about, so add a guard before the crashing call. By that time it
is too late to prevent any memory corruption (we'll have written past
the end of the buffer already) but we can at least try to get a warning
written into an on-disk log by avoiding the hard crash caused by padding
past the buffer with a huge number of zeros.

Signed-off-by: Jouni K. Seppänen <jks@iki.fi>
Fixes: 4a0e3e989d66 ("cdc_ncm: Add support for moving NDP to end of NCM frame")
Link: https://bugzilla.kernel.org/show_bug.cgi?id=209407
Reported-by: kernel test robot <lkp@intel.com>
Reviewed-by: Bjørn Mork <bjorn@mork.no>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/net/usb/cdc_ncm.c |    8 ++++++--
 1 file changed, 6 insertions(+), 2 deletions(-)

--- a/drivers/net/usb/cdc_ncm.c
+++ b/drivers/net/usb/cdc_ncm.c
@@ -1126,7 +1126,10 @@ cdc_ncm_fill_tx_frame(struct usbnet *dev
 	 * accordingly. Otherwise, we should check here.
 	 */
 	if (ctx->drvflags & CDC_NCM_FLAG_NDP_TO_END)
-		delayed_ndp_size = ALIGN(ctx->max_ndp_size, ctx->tx_ndp_modulus);
+		delayed_ndp_size = ctx->max_ndp_size +
+			max_t(u32,
+			      ctx->tx_ndp_modulus,
+			      ctx->tx_modulus + ctx->tx_remainder) - 1;
 	else
 		delayed_ndp_size = 0;
 
@@ -1307,7 +1310,8 @@ cdc_ncm_fill_tx_frame(struct usbnet *dev
 	if (!(dev->driver_info->flags & FLAG_SEND_ZLP) &&
 	    skb_out->len > ctx->min_tx_pkt) {
 		padding_count = ctx->tx_curr_size - skb_out->len;
-		skb_put_zero(skb_out, padding_count);
+		if (!WARN_ON(padding_count > ctx->tx_curr_size))
+			skb_put_zero(skb_out, padding_count);
 	} else if (skb_out->len < ctx->tx_curr_size &&
 		   (skb_out->len % dev->maxpacket) == 0) {
 		skb_put_u8(skb_out, 0);	/* force short packet */

[PATCH 5.4 04/62] net: hns3: fix the number of queues actually used by ARQ

[Greg Kroah-Hartman]

From: Yufeng Mo <moyufeng@huawei.com>

[ Upstream commit 65e61e3c2a619c4d4b873885b2d5394025ed117b ]

HCLGE_MBX_MAX_ARQ_MSG_NUM is used to apply memory for the number
of queues used by ARQ(Asynchronous Receive Queue), so the head
and tail pointers should also use this macro.

Fixes: 07a0556a3a73 ("net: hns3: Changes to support ARQ(Asynchronous Receive Queue)")
Signed-off-by: Yufeng Mo <moyufeng@huawei.com>
Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/net/ethernet/hisilicon/hns3/hclge_mbx.h |    4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

--- a/drivers/net/ethernet/hisilicon/hns3/hclge_mbx.h
+++ b/drivers/net/ethernet/hisilicon/hns3/hclge_mbx.h
@@ -123,7 +123,7 @@ struct hclgevf_mbx_arq_ring {
 #define hclge_mbx_ring_ptr_move_crq(crq) \
 	(crq->next_to_use = (crq->next_to_use + 1) % crq->desc_num)
 #define hclge_mbx_tail_ptr_move_arq(arq) \
-	(arq.tail = (arq.tail + 1) % HCLGE_MBX_MAX_ARQ_MSG_SIZE)
+		(arq.tail = (arq.tail + 1) % HCLGE_MBX_MAX_ARQ_MSG_NUM)
 #define hclge_mbx_head_ptr_move_arq(arq) \
-		(arq.head = (arq.head + 1) % HCLGE_MBX_MAX_ARQ_MSG_SIZE)
+		(arq.head = (arq.head + 1) % HCLGE_MBX_MAX_ARQ_MSG_NUM)
 #endif

[PATCH 5.4 05/62] net: hns3: fix a phy loopback fail issue

[Greg Kroah-Hartman]

From: Yonglong Liu <liuyonglong@huawei.com>

[ Upstream commit f04bbcbf1e38d192e94bbfa126731a52332c40b1 ]

When phy driver does not implement the set_loopback interface,
phy loopback test will return -EOPNOTSUPP, and the loopback test
will fail. So when phy driver does not implement the set_loopback
interface, don't do phy loopback test.

Fixes: c9765a89d142 ("net: hns3: add phy selftest function")
Signed-off-by: Yonglong Liu <liuyonglong@huawei.com>
Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_main.c |    3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

--- a/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_main.c
+++ b/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_main.c
@@ -746,7 +746,8 @@ static int hclge_get_sset_count(struct h
 		handle->flags |= HNAE3_SUPPORT_SERDES_SERIAL_LOOPBACK;
 		handle->flags |= HNAE3_SUPPORT_SERDES_PARALLEL_LOOPBACK;
 
-		if (hdev->hw.mac.phydev) {
+		if (hdev->hw.mac.phydev && hdev->hw.mac.phydev->drv &&
+		    hdev->hw.mac.phydev->drv->set_loopback) {
 			count += 1;
 			handle->flags |= HNAE3_SUPPORT_PHY_LOOPBACK;
 		}

[PATCH 5.4 06/62] net: stmmac: dwmac-sun8i: Balance internal PHY resource references

[Greg Kroah-Hartman]

From: Samuel Holland <samuel@sholland.org>

[ Upstream commit 529254216773acd5039c07aa18cf06fd1f9fccdd ]

While stmmac_pltfr_remove calls sun8i_dwmac_exit, the sun8i_dwmac_init
and sun8i_dwmac_exit functions are also called by the stmmac_platform
suspend/resume callbacks. They may be called many times during the
device's lifetime and should not release resources used by the driver.

Furthermore, there was no error handling in case registering the MDIO
mux failed during probe, and the EPHY clock was never released at all.

Fix all of these issues by moving the deinitialization code to a driver
removal callback. Also ensure the EPHY is powered down before removal.

Fixes: 634db83b8265 ("net: stmmac: dwmac-sun8i: Handle integrated/external MDIOs")
Signed-off-by: Samuel Holland <samuel@sholland.org>
Reviewed-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/net/ethernet/stmicro/stmmac/dwmac-sun8i.c |   27 +++++++++++++++++-----
 1 file changed, 21 insertions(+), 6 deletions(-)

--- a/drivers/net/ethernet/stmicro/stmmac/dwmac-sun8i.c
+++ b/drivers/net/ethernet/stmicro/stmmac/dwmac-sun8i.c
@@ -988,17 +988,12 @@ static void sun8i_dwmac_exit(struct plat
 	struct sunxi_priv_data *gmac = priv;
 
 	if (gmac->variant->soc_has_internal_phy) {
-		/* sun8i_dwmac_exit could be called with mdiomux uninit */
-		if (gmac->mux_handle)
-			mdio_mux_uninit(gmac->mux_handle);
 		if (gmac->internal_phy_powered)
 			sun8i_dwmac_unpower_internal_phy(gmac);
 	}
 
 	sun8i_dwmac_unset_syscon(gmac);
 
-	reset_control_put(gmac->rst_ephy);
-
 	clk_disable_unprepare(gmac->tx_clk);
 
 	if (gmac->regulator)
@@ -1227,12 +1222,32 @@ static int sun8i_dwmac_probe(struct plat
 
 	return ret;
 dwmac_mux:
+	reset_control_put(gmac->rst_ephy);
+	clk_put(gmac->ephy_clk);
 	sun8i_dwmac_unset_syscon(gmac);
 dwmac_exit:
 	stmmac_pltfr_remove(pdev);
 return ret;
 }
 
+static int sun8i_dwmac_remove(struct platform_device *pdev)
+{
+	struct net_device *ndev = platform_get_drvdata(pdev);
+	struct stmmac_priv *priv = netdev_priv(ndev);
+	struct sunxi_priv_data *gmac = priv->plat->bsp_priv;
+
+	if (gmac->variant->soc_has_internal_phy) {
+		mdio_mux_uninit(gmac->mux_handle);
+		sun8i_dwmac_unpower_internal_phy(gmac);
+		reset_control_put(gmac->rst_ephy);
+		clk_put(gmac->ephy_clk);
+	}
+
+	stmmac_pltfr_remove(pdev);
+
+	return 0;
+}
+
 static const struct of_device_id sun8i_dwmac_match[] = {
 	{ .compatible = "allwinner,sun8i-h3-emac",
 		.data = &emac_variant_h3 },
@@ -1252,7 +1267,7 @@ MODULE_DEVICE_TABLE(of, sun8i_dwmac_matc
 
 static struct platform_driver sun8i_dwmac_driver = {
 	.probe  = sun8i_dwmac_probe,
-	.remove = stmmac_pltfr_remove,
+	.remove = sun8i_dwmac_remove,
 	.driver = {
 		.name           = "dwmac-sun8i",
 		.pm		= &stmmac_pltfr_pm_ops,

[PATCH 5.4 07/62] net: stmmac: dwmac-sun8i: Balance internal PHY power

[Greg Kroah-Hartman]

From: Samuel Holland <samuel@sholland.org>

[ Upstream commit b8239638853e3e37b287e4bd4d57b41f14c78550 ]

sun8i_dwmac_exit calls sun8i_dwmac_unpower_internal_phy, but
sun8i_dwmac_init did not call sun8i_dwmac_power_internal_phy. This
caused PHY power to remain off after a suspend/resume cycle. Fix this by
recording if PHY power should be restored, and if so, restoring it.

Fixes: 634db83b8265 ("net: stmmac: dwmac-sun8i: Handle integrated/external MDIOs")
Signed-off-by: Samuel Holland <samuel@sholland.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/net/ethernet/stmicro/stmmac/dwmac-sun8i.c |   31 ++++++++++++++++------
 1 file changed, 23 insertions(+), 8 deletions(-)

--- a/drivers/net/ethernet/stmicro/stmmac/dwmac-sun8i.c
+++ b/drivers/net/ethernet/stmicro/stmmac/dwmac-sun8i.c
@@ -64,6 +64,7 @@ struct emac_variant {
  * @variant:	reference to the current board variant
  * @regmap:	regmap for using the syscon
  * @internal_phy_powered: Does the internal PHY is enabled
+ * @use_internal_phy: Is the internal PHY selected for use
  * @mux_handle:	Internal pointer used by mdio-mux lib
  */
 struct sunxi_priv_data {
@@ -74,6 +75,7 @@ struct sunxi_priv_data {
 	const struct emac_variant *variant;
 	struct regmap_field *regmap_field;
 	bool internal_phy_powered;
+	bool use_internal_phy;
 	void *mux_handle;
 };
 
@@ -523,8 +525,11 @@ static const struct stmmac_dma_ops sun8i
 	.dma_interrupt = sun8i_dwmac_dma_interrupt,
 };
 
+static int sun8i_dwmac_power_internal_phy(struct stmmac_priv *priv);
+
 static int sun8i_dwmac_init(struct platform_device *pdev, void *priv)
 {
+	struct net_device *ndev = platform_get_drvdata(pdev);
 	struct sunxi_priv_data *gmac = priv;
 	int ret;
 
@@ -538,13 +543,25 @@ static int sun8i_dwmac_init(struct platf
 
 	ret = clk_prepare_enable(gmac->tx_clk);
 	if (ret) {
-		if (gmac->regulator)
-			regulator_disable(gmac->regulator);
 		dev_err(&pdev->dev, "Could not enable AHB clock\n");
-		return ret;
+		goto err_disable_regulator;
+	}
+
+	if (gmac->use_internal_phy) {
+		ret = sun8i_dwmac_power_internal_phy(netdev_priv(ndev));
+		if (ret)
+			goto err_disable_clk;
 	}
 
 	return 0;
+
+err_disable_clk:
+	clk_disable_unprepare(gmac->tx_clk);
+err_disable_regulator:
+	if (gmac->regulator)
+		regulator_disable(gmac->regulator);
+
+	return ret;
 }
 
 static void sun8i_dwmac_core_init(struct mac_device_info *hw,
@@ -815,7 +832,6 @@ static int mdio_mux_syscon_switch_fn(int
 	struct sunxi_priv_data *gmac = priv->plat->bsp_priv;
 	u32 reg, val;
 	int ret = 0;
-	bool need_power_ephy = false;
 
 	if (current_child ^ desired_child) {
 		regmap_field_read(gmac->regmap_field, &reg);
@@ -823,13 +839,12 @@ static int mdio_mux_syscon_switch_fn(int
 		case DWMAC_SUN8I_MDIO_MUX_INTERNAL_ID:
 			dev_info(priv->device, "Switch mux to internal PHY");
 			val = (reg & ~H3_EPHY_MUX_MASK) | H3_EPHY_SELECT;
-
-			need_power_ephy = true;
+			gmac->use_internal_phy = true;
 			break;
 		case DWMAC_SUN8I_MDIO_MUX_EXTERNAL_ID:
 			dev_info(priv->device, "Switch mux to external PHY");
 			val = (reg & ~H3_EPHY_MUX_MASK) | H3_EPHY_SHUTDOWN;
-			need_power_ephy = false;
+			gmac->use_internal_phy = false;
 			break;
 		default:
 			dev_err(priv->device, "Invalid child ID %x\n",
@@ -837,7 +852,7 @@ static int mdio_mux_syscon_switch_fn(int
 			return -EINVAL;
 		}
 		regmap_field_write(gmac->regmap_field, val);
-		if (need_power_ephy) {
+		if (gmac->use_internal_phy) {
 			ret = sun8i_dwmac_power_internal_phy(priv);
 			if (ret)
 				return ret;

[PATCH 5.4 08/62] net: vlan: avoid leaks on register_vlan_dev() failures

[Greg Kroah-Hartman]

From: Jakub Kicinski <kuba@kernel.org>

[ Upstream commit 55b7ab1178cbf41f979ff83236d3321ad35ed2ad ]

VLAN checks for NETREG_UNINITIALIZED to distinguish between
registration failure and unregistration in progress.

Since commit cb626bf566eb ("net-sysfs: Fix reference count leak")
registration failure may, however, result in NETREG_UNREGISTERED
as well as NETREG_UNINITIALIZED.

This fix is similer to cebb69754f37 ("rtnetlink: Fix
memory(net_device) leak when ->newlink fails")

Fixes: cb626bf566eb ("net-sysfs: Fix reference count leak")
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 net/8021q/vlan.c |    3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

--- a/net/8021q/vlan.c
+++ b/net/8021q/vlan.c
@@ -280,7 +280,8 @@ static int register_vlan_device(struct n
 	return 0;
 
 out_free_newdev:
-	if (new_dev->reg_state == NETREG_UNINITIALIZED)
+	if (new_dev->reg_state == NETREG_UNINITIALIZED ||
+	    new_dev->reg_state == NETREG_UNREGISTERED)
 		free_netdev(new_dev);
 	return err;
 }

[PATCH 5.4 09/62] net/sonic: Fix some resource leaks in error handling paths

[Greg Kroah-Hartman]

From: Christophe JAILLET <christophe.jaillet@wanadoo.fr>

[ Upstream commit 0f7ba7bc46fa0b574ccacf5672991b321e028492 ]

A call to dma_alloc_coherent() is wrapped by sonic_alloc_descriptors().

This is correctly freed in the remove function, but not in the error
handling path of the probe function. Fix this by adding the missing
dma_free_coherent() call.

While at it, rename a label in order to be slightly more informative.

Cc: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Cc: Chris Zankel <chris@zankel.net>
Fixes: 74f2a5f0ef64 ("xtensa: Add support for the Sonic Ethernet device for the XT2000 board.")
Fixes: efcce839360f ("[PATCH] macsonic/jazzsonic network drivers update")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Signed-off-by: Finn Thain <fthain@telegraphics.com.au>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/net/ethernet/natsemi/macsonic.c |   12 ++++++++++--
 drivers/net/ethernet/natsemi/xtsonic.c  |    7 +++++--
 2 files changed, 15 insertions(+), 4 deletions(-)

--- a/drivers/net/ethernet/natsemi/macsonic.c
+++ b/drivers/net/ethernet/natsemi/macsonic.c
@@ -540,10 +540,14 @@ static int mac_sonic_platform_probe(stru
 
 	err = register_netdev(dev);
 	if (err)
-		goto out;
+		goto undo_probe;
 
 	return 0;
 
+undo_probe:
+	dma_free_coherent(lp->device,
+			  SIZEOF_SONIC_DESC * SONIC_BUS_SCALE(lp->dma_bitmode),
+			  lp->descriptors, lp->descriptors_laddr);
 out:
 	free_netdev(dev);
 
@@ -618,12 +622,16 @@ static int mac_sonic_nubus_probe(struct
 
 	err = register_netdev(ndev);
 	if (err)
-		goto out;
+		goto undo_probe;
 
 	nubus_set_drvdata(board, ndev);
 
 	return 0;
 
+undo_probe:
+	dma_free_coherent(lp->device,
+			  SIZEOF_SONIC_DESC * SONIC_BUS_SCALE(lp->dma_bitmode),
+			  lp->descriptors, lp->descriptors_laddr);
 out:
 	free_netdev(ndev);
 	return err;
--- a/drivers/net/ethernet/natsemi/xtsonic.c
+++ b/drivers/net/ethernet/natsemi/xtsonic.c
@@ -265,11 +265,14 @@ int xtsonic_probe(struct platform_device
 	sonic_msg_init(dev);
 
 	if ((err = register_netdev(dev)))
-		goto out1;
+		goto undo_probe1;
 
 	return 0;
 
-out1:
+undo_probe1:
+	dma_free_coherent(lp->device,
+			  SIZEOF_SONIC_DESC * SONIC_BUS_SCALE(lp->dma_bitmode),
+			  lp->descriptors, lp->descriptors_laddr);
 	release_region(dev->base_addr, SONIC_MEM_SIZE);
 out:
 	free_netdev(dev);

[PATCH 5.4 10/62] net: ipv6: fib: flush exceptions when purging route

[Greg Kroah-Hartman]

From: Sean Tranchetti <stranche@codeaurora.org>

[ Upstream commit d8f5c29653c3f6995e8979be5623d263e92f6b86 ]

Route removal is handled by two code paths. The main removal path is via
fib6_del_route() which will handle purging any PMTU exceptions from the
cache, removing all per-cpu copies of the DST entry used by the route, and
releasing the fib6_info struct.

The second removal location is during fib6_add_rt2node() during a route
replacement operation. This path also calls fib6_purge_rt() to handle
cleaning up the per-cpu copies of the DST entries and releasing the
fib6_info associated with the older route, but it does not flush any PMTU
exceptions that the older route had. Since the older route is removed from
the tree during the replacement, we lose any way of accessing it again.

As these lingering DSTs and the fib6_info struct are holding references to
the underlying netdevice struct as well, unregistering that device from the
kernel can never complete.

Fixes: 2b760fcf5cfb3 ("ipv6: hook up exception table to store dst cache")
Signed-off-by: Sean Tranchetti <stranche@codeaurora.org>
Reviewed-by: David Ahern <dsahern@kernel.org>
Link: https://lore.kernel.org/r/1609892546-11389-1-git-send-email-stranche@quicinc.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 net/ipv6/ip6_fib.c |    5 ++---
 1 file changed, 2 insertions(+), 3 deletions(-)

--- a/net/ipv6/ip6_fib.c
+++ b/net/ipv6/ip6_fib.c
@@ -973,6 +973,8 @@ static void fib6_purge_rt(struct fib6_in
 {
 	struct fib6_table *table = rt->fib6_table;
 
+	/* Flush all cached dst in exception table */
+	rt6_flush_exceptions(rt);
 	fib6_drop_pcpu_from(rt, table);
 
 	if (rt->nh && !list_empty(&rt->nh_list))
@@ -1839,9 +1841,6 @@ static void fib6_del_route(struct fib6_t
 	net->ipv6.rt6_stats->fib_rt_entries--;
 	net->ipv6.rt6_stats->fib_discarded_routes++;
 
-	/* Flush all cached dst in exception table */
-	rt6_flush_exceptions(rt);
-
 	/* Reset round-robin state, if necessary */
 	if (rcu_access_pointer(fn->rr_ptr) == rt)
 		fn->rr_ptr = NULL;

[PATCH 5.4 11/62] tools: selftests: add test for changing routes with PTMU exceptions

[Greg Kroah-Hartman]

From: Sean Tranchetti <stranche@codeaurora.org>

[ Upstream commit 5316a7c0130acf09bfc8bb0092407006010fcccc ]

Adds new 2 new tests to the PTMU script: pmtu_ipv4/6_route_change.

These tests explicitly test for a recently discovered problem in the
IPv6 routing framework where PMTU exceptions were not properly released
when replacing a route via "ip route change ...".

After creating PMTU exceptions, the route from the device A to R1 will be
replaced with a new route, then device A will be deleted. If the PMTU
exceptions were properly cleaned up by the kernel, this device deletion
will succeed. Otherwise, the unregistration of the device will stall, and
messages such as the following will be logged in dmesg:

unregister_netdevice: waiting for veth_A-R1 to become free. Usage count = 4

Signed-off-by: Sean Tranchetti <stranche@codeaurora.org>
Reviewed-by: David Ahern <dsahern@kernel.org>
Link: https://lore.kernel.org/r/1609892546-11389-2-git-send-email-stranche@quicinc.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 tools/testing/selftests/net/pmtu.sh |   71 ++++++++++++++++++++++++++++++++++--
 1 file changed, 69 insertions(+), 2 deletions(-)

--- a/tools/testing/selftests/net/pmtu.sh
+++ b/tools/testing/selftests/net/pmtu.sh
@@ -119,7 +119,15 @@
 # - list_flush_ipv6_exception
 #	Using the same topology as in pmtu_ipv6, create exceptions, and check
 #	they are shown when listing exception caches, gone after flushing them
-
+#
+# - pmtu_ipv4_route_change
+#	Use the same topology as in pmtu_ipv4, but issue a route replacement
+#	command and delete the corresponding device afterward. This tests for
+#	proper cleanup of the PMTU exceptions by the route replacement path.
+#	Device unregistration should complete successfully
+#
+# - pmtu_ipv6_route_change
+#	Same as above but with IPv6
 
 # Kselftest framework requirement - SKIP code is 4.
 ksft_skip=4
@@ -161,7 +169,9 @@ tests="
 	cleanup_ipv4_exception		ipv4: cleanup of cached exceptions	1
 	cleanup_ipv6_exception		ipv6: cleanup of cached exceptions	1
 	list_flush_ipv4_exception	ipv4: list and flush cached exceptions	1
-	list_flush_ipv6_exception	ipv6: list and flush cached exceptions	1"
+	list_flush_ipv6_exception	ipv6: list and flush cached exceptions	1
+	pmtu_ipv4_route_change		ipv4: PMTU exception w/route replace	1
+	pmtu_ipv6_route_change		ipv6: PMTU exception w/route replace	1"
 
 NS_A="ns-A"
 NS_B="ns-B"
@@ -1316,6 +1326,63 @@ test_list_flush_ipv6_exception() {
 	return ${fail}
 }
 
+test_pmtu_ipvX_route_change() {
+	family=${1}
+
+	setup namespaces routing || return 2
+	trace "${ns_a}"  veth_A-R1    "${ns_r1}" veth_R1-A \
+	      "${ns_r1}" veth_R1-B    "${ns_b}"  veth_B-R1 \
+	      "${ns_a}"  veth_A-R2    "${ns_r2}" veth_R2-A \
+	      "${ns_r2}" veth_R2-B    "${ns_b}"  veth_B-R2
+
+	if [ ${family} -eq 4 ]; then
+		ping=ping
+		dst1="${prefix4}.${b_r1}.1"
+		dst2="${prefix4}.${b_r2}.1"
+		gw="${prefix4}.${a_r1}.2"
+	else
+		ping=${ping6}
+		dst1="${prefix6}:${b_r1}::1"
+		dst2="${prefix6}:${b_r2}::1"
+		gw="${prefix6}:${a_r1}::2"
+	fi
+
+	# Set up initial MTU values
+	mtu "${ns_a}"  veth_A-R1 2000
+	mtu "${ns_r1}" veth_R1-A 2000
+	mtu "${ns_r1}" veth_R1-B 1400
+	mtu "${ns_b}"  veth_B-R1 1400
+
+	mtu "${ns_a}"  veth_A-R2 2000
+	mtu "${ns_r2}" veth_R2-A 2000
+	mtu "${ns_r2}" veth_R2-B 1500
+	mtu "${ns_b}"  veth_B-R2 1500
+
+	# Create route exceptions
+	run_cmd ${ns_a} ${ping} -q -M want -i 0.1 -w 1 -s 1800 ${dst1}
+	run_cmd ${ns_a} ${ping} -q -M want -i 0.1 -w 1 -s 1800 ${dst2}
+
+	# Check that exceptions have been created with the correct PMTU
+	pmtu_1="$(route_get_dst_pmtu_from_exception "${ns_a}" ${dst1})"
+	check_pmtu_value "1400" "${pmtu_1}" "exceeding MTU" || return 1
+	pmtu_2="$(route_get_dst_pmtu_from_exception "${ns_a}" ${dst2})"
+	check_pmtu_value "1500" "${pmtu_2}" "exceeding MTU" || return 1
+
+	# Replace the route from A to R1
+	run_cmd ${ns_a} ip route change default via ${gw}
+
+	# Delete the device in A
+	run_cmd ${ns_a} ip link del "veth_A-R1"
+}
+
+test_pmtu_ipv4_route_change() {
+	test_pmtu_ipvX_route_change 4
+}
+
+test_pmtu_ipv6_route_change() {
+	test_pmtu_ipvX_route_change 6
+}
+
 usage() {
 	echo
 	echo "$0 [OPTIONS] [TEST]..."

[PATCH 5.4 12/62] net: fix pmtu check in nopmtudisc mode

[Greg Kroah-Hartman]

From: Florian Westphal <fw@strlen.de>

[ Upstream commit 50c661670f6a3908c273503dfa206dfc7aa54c07 ]

For some reason ip_tunnel insist on setting the DF bit anyway when the
inner header has the DF bit set, EVEN if the tunnel was configured with
'nopmtudisc'.

This means that the script added in the previous commit
cannot be made to work by adding the 'nopmtudisc' flag to the
ip tunnel configuration. Doing so breaks connectivity even for the
without-conntrack/netfilter scenario.

When nopmtudisc is set, the tunnel will skip the mtu check, so no
icmp error is sent to client. Then, because inner header has DF set,
the outer header gets added with DF bit set as well.

IP stack then sends an error to itself because the packet exceeds
the device MTU.

Fixes: 23a3647bc4f93 ("ip_tunnels: Use skb-len to PMTU check.")
Cc: Stefano Brivio <sbrivio@redhat.com>
Signed-off-by: Florian Westphal <fw@strlen.de>
Acked-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 net/ipv4/ip_tunnel.c |   11 +++++------
 1 file changed, 5 insertions(+), 6 deletions(-)

--- a/net/ipv4/ip_tunnel.c
+++ b/net/ipv4/ip_tunnel.c
@@ -765,8 +765,11 @@ void ip_tunnel_xmit(struct sk_buff *skb,
 		goto tx_error;
 	}
 
-	if (tnl_update_pmtu(dev, skb, rt, tnl_params->frag_off, inner_iph,
-			    0, 0, false)) {
+	df = tnl_params->frag_off;
+	if (skb->protocol == htons(ETH_P_IP) && !tunnel->ignore_df)
+		df |= (inner_iph->frag_off & htons(IP_DF));
+
+	if (tnl_update_pmtu(dev, skb, rt, df, inner_iph, 0, 0, false)) {
 		ip_rt_put(rt);
 		goto tx_error;
 	}
@@ -794,10 +797,6 @@ void ip_tunnel_xmit(struct sk_buff *skb,
 			ttl = ip4_dst_hoplimit(&rt->dst);
 	}
 
-	df = tnl_params->frag_off;
-	if (skb->protocol == htons(ETH_P_IP) && !tunnel->ignore_df)
-		df |= (inner_iph->frag_off&htons(IP_DF));
-
 	max_headroom = LL_RESERVED_SPACE(rt->dst.dev) + sizeof(struct iphdr)
 			+ rt->dst.header_len + ip_encap_hlen(&tunnel->encap);
 	if (max_headroom > dev->needed_headroom)

[PATCH 5.4 13/62] net: ip: always refragment ip defragmented packets

[Greg Kroah-Hartman]

From: Florian Westphal <fw@strlen.de>

[ Upstream commit bb4cc1a18856a73f0ff5137df0c2a31f4c50f6cf ]

Conntrack reassembly records the largest fragment size seen in IPCB.
However, when this gets forwarded/transmitted, fragmentation will only
be forced if one of the fragmented packets had the DF bit set.

In that case, a flag in IPCB will force fragmentation even if the
MTU is large enough.

This should work fine, but this breaks with ip tunnels.
Consider client that sends a UDP datagram of size X to another host.

The client fragments the datagram, so two packets, of size y and z, are
sent. DF bit is not set on any of these packets.

Middlebox netfilter reassembles those packets back to single size-X
packet, before routing decision.

packet-size-vs-mtu checks in ip_forward are irrelevant, because DF bit
isn't set.  At output time, ip refragmentation is skipped as well
because x is still smaller than the mtu of the output device.

If ttransmit device is an ip tunnel, the packet size increases to
x+overhead.

Also, tunnel might be configured to force DF bit on outer header.

In this case, packet will be dropped (exceeds MTU) and an ICMP error is
generated back to sender.

But sender already respects the announced MTU, all the packets that
it sent did fit the announced mtu.

Force refragmentation as per original sizes unconditionally so ip tunnel
will encapsulate the fragments instead.

The only other solution I see is to place ip refragmentation in
the ip_tunnel code to handle this case.

Fixes: d6b915e29f4ad ("ip_fragment: don't forward defragmented DF packet")
Reported-by: Christian Perle <christian.perle@secunet.com>
Signed-off-by: Florian Westphal <fw@strlen.de>
Acked-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 net/ipv4/ip_output.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/net/ipv4/ip_output.c
+++ b/net/ipv4/ip_output.c
@@ -303,7 +303,7 @@ static int __ip_finish_output(struct net
 	if (skb_is_gso(skb))
 		return ip_finish_output_gso(net, sk, skb, mtu);
 
-	if (skb->len > mtu || (IPCB(skb)->flags & IPSKB_FRAG_PMTU))
+	if (skb->len > mtu || IPCB(skb)->frag_max_size)
 		return ip_fragment(net, sk, skb, mtu, ip_finish_output2);
 
 	return ip_finish_output2(net, sk, skb);

[PATCH 5.4 14/62] octeontx2-af: fix memory leak of lmac and lmac->name

[Greg Kroah-Hartman]

From: Colin Ian King <colin.king@canonical.com>

[ Upstream commit ac7996d680d8b4a51bb99bbdcee3dc838b985498 ]

Currently the error return paths don't kfree lmac and lmac->name
leading to some memory leaks.  Fix this by adding two error return
paths that kfree these objects

Addresses-Coverity: ("Resource leak")
Fixes: 1463f382f58d ("octeontx2-af: Add support for CGX link management")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Link: https://lore.kernel.org/r/20210107123916.189748-1-colin.king@canonical.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/net/ethernet/marvell/octeontx2/af/cgx.c |   14 +++++++++++---
 1 file changed, 11 insertions(+), 3 deletions(-)

--- a/drivers/net/ethernet/marvell/octeontx2/af/cgx.c
+++ b/drivers/net/ethernet/marvell/octeontx2/af/cgx.c
@@ -725,8 +725,10 @@ static int cgx_lmac_init(struct cgx *cgx
 		if (!lmac)
 			return -ENOMEM;
 		lmac->name = kcalloc(1, sizeof("cgx_fwi_xxx_yyy"), GFP_KERNEL);
-		if (!lmac->name)
-			return -ENOMEM;
+		if (!lmac->name) {
+			err = -ENOMEM;
+			goto err_lmac_free;
+		}
 		sprintf(lmac->name, "cgx_fwi_%d_%d", cgx->cgx_id, i);
 		lmac->lmac_id = i;
 		lmac->cgx = cgx;
@@ -737,7 +739,7 @@ static int cgx_lmac_init(struct cgx *cgx
 						 CGX_LMAC_FWI + i * 9),
 				   cgx_fwi_event_handler, 0, lmac->name, lmac);
 		if (err)
-			return err;
+			goto err_irq;
 
 		/* Enable interrupt */
 		cgx_write(cgx, lmac->lmac_id, CGXX_CMRX_INT_ENA_W1S,
@@ -748,6 +750,12 @@ static int cgx_lmac_init(struct cgx *cgx
 	}
 
 	return cgx_lmac_verify_fwi_version(cgx);
+
+err_irq:
+	kfree(lmac->name);
+err_lmac_free:
+	kfree(lmac);
+	return err;
 }
 
 static int cgx_lmac_exit(struct cgx *cgx)

[PATCH 5.4 15/62] nexthop: Fix off-by-one error in error path

[Greg Kroah-Hartman]

From: Ido Schimmel <idosch@nvidia.com>

[ Upstream commit 07e61a979ca4dddb3661f59328b3cd109f6b0070 ]

A reference was not taken for the current nexthop entry, so do not try
to put it in the error path.

Fixes: 430a049190de ("nexthop: Add support for nexthop groups")
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Petr Machata <petrm@nvidia.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 net/ipv4/nexthop.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/net/ipv4/nexthop.c
+++ b/net/ipv4/nexthop.c
@@ -1157,7 +1157,7 @@ static struct nexthop *nexthop_create_gr
 	return nh;
 
 out_no_nh:
-	for (; i >= 0; --i)
+	for (i--; i >= 0; --i)
 		nexthop_put(nhg->nh_entries[i].nh);
 
 	kfree(nhg->spare);

[PATCH 5.4 16/62] nexthop: Unlink nexthop group entry in error path

[Greg Kroah-Hartman]

From: Ido Schimmel <idosch@nvidia.com>

[ Upstream commit 7b01e53eee6dce7a8a6736e06b99b68cd0cc7a27 ]

In case of error, remove the nexthop group entry from the list to which
it was previously added.

Fixes: 430a049190de ("nexthop: Add support for nexthop groups")
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Petr Machata <petrm@nvidia.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 net/ipv4/nexthop.c |    4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)

--- a/net/ipv4/nexthop.c
+++ b/net/ipv4/nexthop.c
@@ -1157,8 +1157,10 @@ static struct nexthop *nexthop_create_gr
 	return nh;
 
 out_no_nh:
-	for (i--; i >= 0; --i)
+	for (i--; i >= 0; --i) {
+		list_del(&nhg->nh_entries[i].nh_list);
 		nexthop_put(nhg->nh_entries[i].nh);
+	}
 
 	kfree(nhg->spare);
 	kfree(nhg);

[PATCH 5.4 17/62] s390/qeth: fix L2 header access in qeth_l3_osa_features_check()

[Greg Kroah-Hartman]

From: Julian Wiedmann <jwi@linux.ibm.com>

[ Upstream commit f9c4845385c8f6631ebd5dddfb019ea7a285fba4 ]

ip_finish_output_gso() may call .ndo_features_check() even before the
skb has a L2 header. This conflicts with qeth_get_ip_version()'s attempt
to inspect the L2 header via vlan_eth_hdr().

Switch to vlan_get_protocol(), as already used further down in the
common qeth_features_check() path.

Fixes: f13ade199391 ("s390/qeth: run non-offload L3 traffic over common xmit path")
Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/s390/net/qeth_l3_main.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/drivers/s390/net/qeth_l3_main.c
+++ b/drivers/s390/net/qeth_l3_main.c
@@ -2114,7 +2114,7 @@ static netdev_features_t qeth_l3_osa_fea
 						    struct net_device *dev,
 						    netdev_features_t features)
 {
-	if (qeth_get_ip_version(skb) != 4)
+	if (vlan_get_protocol(skb) != htons(ETH_P_IP))
 		features &= ~NETIF_F_HW_VLAN_CTAG_TX;
 	return qeth_features_check(skb, dev, features);
 }

[PATCH 5.4 18/62] net: dsa: lantiq_gswip: Exclude RMII from modes that report 1 GbE

[Greg Kroah-Hartman]

From: Aleksander Jan Bajkowski <olek2@wp.pl>

[ Upstream commit 3545454c7801e391b0d966f82c98614d45394770 ]

Exclude RMII from modes that report 1 GbE support. Reduced MII supports
up to 100 MbE.

Fixes: 14fceff4771e ("net: dsa: Add Lantiq / Intel DSA driver for vrx200")
Signed-off-by: Aleksander Jan Bajkowski <olek2@wp.pl>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Link: https://lore.kernel.org/r/20210107195818.3878-1-olek2@wp.pl
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/net/dsa/lantiq_gswip.c |    7 ++++---
 1 file changed, 4 insertions(+), 3 deletions(-)

--- a/drivers/net/dsa/lantiq_gswip.c
+++ b/drivers/net/dsa/lantiq_gswip.c
@@ -1419,11 +1419,12 @@ static void gswip_phylink_validate(struc
 	phylink_set(mask, Pause);
 	phylink_set(mask, Asym_Pause);
 
-	/* With the exclusion of MII and Reverse MII, we support Gigabit,
-	 * including Half duplex
+	/* With the exclusion of MII, Reverse MII and Reduced MII, we
+	 * support Gigabit, including Half duplex
 	 */
 	if (state->interface != PHY_INTERFACE_MODE_MII &&
-	    state->interface != PHY_INTERFACE_MODE_REVMII) {
+	    state->interface != PHY_INTERFACE_MODE_REVMII &&
+	    state->interface != PHY_INTERFACE_MODE_RMII) {
 		phylink_set(mask, 1000baseT_Full);
 		phylink_set(mask, 1000baseT_Half);
 	}

[PATCH 5.4 19/62] net/mlx5: Use port_num 1 instead of 0 when delete a RoCE address

[Greg Kroah-Hartman]

From: Mark Zhang <markzhang@nvidia.com>

[ Upstream commit 0f2dcade69f2af56b74bce432e48ff3957830ce2 ]

In multi-port mode, FW reports syndrome 0x2ea48 (invalid vhca_port_number)
if the port_num is not 1 or 2.

Fixes: 80f09dfc237f ("net/mlx5: Eswitch, enable RoCE loopback traffic")
Signed-off-by: Mark Zhang <markzhang@nvidia.com>
Reviewed-by: Maor Gottlieb <maorg@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/net/ethernet/mellanox/mlx5/core/rdma.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/drivers/net/ethernet/mellanox/mlx5/core/rdma.c
+++ b/drivers/net/ethernet/mellanox/mlx5/core/rdma.c
@@ -116,7 +116,7 @@ free:
 static void mlx5_rdma_del_roce_addr(struct mlx5_core_dev *dev)
 {
 	mlx5_core_roce_gid_set(dev, 0, 0, 0,
-			       NULL, NULL, false, 0, 0);
+			       NULL, NULL, false, 0, 1);
 }
 
 static void mlx5_rdma_make_default_gid(struct mlx5_core_dev *dev, union ib_gid *gid)

[PATCH 5.4 20/62] net/mlx5e: ethtool, Fix restriction of autoneg with 56G

[Greg Kroah-Hartman]

From: Aya Levin <ayal@nvidia.com>

[ Upstream commit b1c0aca3d3ddeebeec57ada9c2df9ed647939249 ]

Prior to this patch, configuring speed to 50G with autoneg off over
devices supporting 50G per lane failed.
Support for 50G per lane introduced a new set of link-modes, on which
driver always performed a speed validation as if only legacy link-modes
were configured. Fix driver speed validation to force setting autoneg
over 56G only if in legacy link-mode.

Fixes: 3d7cadae51f1 ("net/mlx5e: ethtool, Fix analysis of speed setting")
Signed-off-by: Aya Levin <ayal@nvidia.com>
Reviewed-by: Eran Ben Elisha <eranbe@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/net/ethernet/mellanox/mlx5/core/en_ethtool.c |   24 ++++++++++++++-----
 1 file changed, 18 insertions(+), 6 deletions(-)

--- a/drivers/net/ethernet/mellanox/mlx5/core/en_ethtool.c
+++ b/drivers/net/ethernet/mellanox/mlx5/core/en_ethtool.c
@@ -976,6 +976,22 @@ static int mlx5e_get_link_ksettings(stru
 	return mlx5e_ethtool_get_link_ksettings(priv, link_ksettings);
 }
 
+static int mlx5e_speed_validate(struct net_device *netdev, bool ext,
+				const unsigned long link_modes, u8 autoneg)
+{
+	/* Extended link-mode has no speed limitations. */
+	if (ext)
+		return 0;
+
+	if ((link_modes & MLX5E_PROT_MASK(MLX5E_56GBASE_R4)) &&
+	    autoneg != AUTONEG_ENABLE) {
+		netdev_err(netdev, "%s: 56G link speed requires autoneg enabled\n",
+			   __func__);
+		return -EINVAL;
+	}
+	return 0;
+}
+
 static u32 mlx5e_ethtool2ptys_adver_link(const unsigned long *link_modes)
 {
 	u32 i, ptys_modes = 0;
@@ -1068,13 +1084,9 @@ int mlx5e_ethtool_set_link_ksettings(str
 	link_modes = autoneg == AUTONEG_ENABLE ? ethtool2ptys_adver_func(adver) :
 		mlx5e_port_speed2linkmodes(mdev, speed, !ext);
 
-	if ((link_modes & MLX5E_PROT_MASK(MLX5E_56GBASE_R4)) &&
-	    autoneg != AUTONEG_ENABLE) {
-		netdev_err(priv->netdev, "%s: 56G link speed requires autoneg enabled\n",
-			   __func__);
-		err = -EINVAL;
+	err = mlx5e_speed_validate(priv->netdev, ext, link_modes, autoneg);
+	if (err)
 		goto out;
-	}
 
 	link_modes = link_modes & eproto.cap;
 	if (!link_modes) {

[PATCH 5.4 21/62] chtls: Fix hardware tid leak

[Greg Kroah-Hartman]

From: Ayush Sawal <ayush.sawal@chelsio.com>

[ Upstream commit 717df0f4cdc9044c415431a3522b3e9ccca5b4a3 ]

send_abort_rpl() is not calculating cpl_abort_req_rss offset and
ends up sending wrong TID with abort_rpl WR causng tid leaks.
Replaced send_abort_rpl() with chtls_send_abort_rpl() as it is
redundant.

Fixes: cc35c88ae4db ("crypto : chtls - CPL handler definition")
Signed-off-by: Rohit Maheshwari <rohitm@chelsio.com>
Signed-off-by: Ayush Sawal <ayush.sawal@chelsio.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/crypto/chelsio/chtls/chtls_cm.c |   39 ++------------------------------
 1 file changed, 3 insertions(+), 36 deletions(-)

--- a/drivers/crypto/chelsio/chtls/chtls_cm.c
+++ b/drivers/crypto/chelsio/chtls/chtls_cm.c
@@ -1828,39 +1828,6 @@ static void send_defer_abort_rpl(struct
 	kfree_skb(skb);
 }
 
-static void send_abort_rpl(struct sock *sk, struct sk_buff *skb,
-			   struct chtls_dev *cdev, int status, int queue)
-{
-	struct cpl_abort_req_rss *req = cplhdr(skb);
-	struct sk_buff *reply_skb;
-	struct chtls_sock *csk;
-
-	csk = rcu_dereference_sk_user_data(sk);
-
-	reply_skb = alloc_skb(sizeof(struct cpl_abort_rpl),
-			      GFP_KERNEL);
-
-	if (!reply_skb) {
-		req->status = (queue << 1);
-		send_defer_abort_rpl(cdev, skb);
-		return;
-	}
-
-	set_abort_rpl_wr(reply_skb, GET_TID(req), status);
-	kfree_skb(skb);
-
-	set_wr_txq(reply_skb, CPL_PRIORITY_DATA, queue);
-	if (csk_conn_inline(csk)) {
-		struct l2t_entry *e = csk->l2t_entry;
-
-		if (e && sk->sk_state != TCP_SYN_RECV) {
-			cxgb4_l2t_send(csk->egress_dev, reply_skb, e);
-			return;
-		}
-	}
-	cxgb4_ofld_send(cdev->lldi->ports[0], reply_skb);
-}
-
 /*
  * Add an skb to the deferred skb queue for processing from process context.
  */
@@ -1924,8 +1891,8 @@ static void bl_abort_syn_rcv(struct sock
 
 	skb->sk	= NULL;
 	do_abort_syn_rcv(child, lsk);
-	send_abort_rpl(child, skb, BLOG_SKB_CB(skb)->cdev,
-		       CPL_ABORT_NO_RST, queue);
+	chtls_send_abort_rpl(child, skb, BLOG_SKB_CB(skb)->cdev,
+			     CPL_ABORT_NO_RST, queue);
 }
 
 static int abort_syn_rcv(struct sock *sk, struct sk_buff *skb)
@@ -1956,7 +1923,7 @@ static int abort_syn_rcv(struct sock *sk
 		int queue = csk->txq_idx;
 
 		do_abort_syn_rcv(sk, psk);
-		send_abort_rpl(sk, skb, cdev, CPL_ABORT_NO_RST, queue);
+		chtls_send_abort_rpl(sk, skb, cdev, CPL_ABORT_NO_RST, queue);
 	} else {
 		skb->sk = sk;
 		BLOG_SKB_CB(skb)->backlog_rcv = bl_abort_syn_rcv;

[PATCH 5.4 22/62] chtls: Remove invalid set_tcb call

[Greg Kroah-Hartman]

From: Ayush Sawal <ayush.sawal@chelsio.com>

[ Upstream commit 827d329105bfde6701f0077e34a09c4a86e27145 ]

At the time of SYN_RECV, connection information is not
initialized at FW, updating tcb flag over uninitialized
connection causes adapter crash. We don't need to
update the flag during SYN_RECV state, so avoid this.

Fixes: cc35c88ae4db ("crypto : chtls - CPL handler definition")
Signed-off-by: Rohit Maheshwari <rohitm@chelsio.com>
Signed-off-by: Ayush Sawal <ayush.sawal@chelsio.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/crypto/chelsio/chtls/chtls_cm.c |    3 ---
 1 file changed, 3 deletions(-)

--- a/drivers/crypto/chelsio/chtls/chtls_cm.c
+++ b/drivers/crypto/chelsio/chtls/chtls_cm.c
@@ -1941,9 +1941,6 @@ static void chtls_abort_req_rss(struct s
 	int queue = csk->txq_idx;
 
 	if (is_neg_adv(req->status)) {
-		if (sk->sk_state == TCP_SYN_RECV)
-			chtls_set_tcb_tflag(sk, 0, 0);
-
 		kfree_skb(skb);
 		return;
 	}

[PATCH 5.4 23/62] chtls: Fix panic when route to peer not configured

[Greg Kroah-Hartman]

From: Ayush Sawal <ayush.sawal@chelsio.com>

[ Upstream commit 5a5fac9966bb6d513198634b0b1357be7e8447d2 ]

If route to peer is not configured, we might get non tls
devices from dst_neigh_lookup() which is invalid, adding a
check to avoid it.

Fixes: cc35c88ae4db ("crypto : chtls - CPL handler definition")
Signed-off-by: Rohit Maheshwari <rohitm@chelsio.com>
Signed-off-by: Ayush Sawal <ayush.sawal@chelsio.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/crypto/chelsio/chtls/chtls_cm.c |   14 ++++++++++++--
 1 file changed, 12 insertions(+), 2 deletions(-)

--- a/drivers/crypto/chelsio/chtls/chtls_cm.c
+++ b/drivers/crypto/chelsio/chtls/chtls_cm.c
@@ -1021,6 +1021,7 @@ static struct sock *chtls_recv_sock(stru
 				    const struct cpl_pass_accept_req *req,
 				    struct chtls_dev *cdev)
 {
+	struct adapter *adap = pci_get_drvdata(cdev->pdev);
 	struct inet_sock *newinet;
 	const struct iphdr *iph;
 	struct tls_context *ctx;
@@ -1030,9 +1031,10 @@ static struct sock *chtls_recv_sock(stru
 	struct neighbour *n;
 	struct tcp_sock *tp;
 	struct sock *newsk;
+	bool found = false;
 	u16 port_id;
 	int rxq_idx;
-	int step;
+	int step, i;
 
 	iph = (const struct iphdr *)network_hdr;
 	newsk = tcp_create_openreq_child(lsk, oreq, cdev->askb);
@@ -1044,7 +1046,7 @@ static struct sock *chtls_recv_sock(stru
 		goto free_sk;
 
 	n = dst_neigh_lookup(dst, &iph->saddr);
-	if (!n)
+	if (!n || !n->dev)
 		goto free_sk;
 
 	ndev = n->dev;
@@ -1053,6 +1055,13 @@ static struct sock *chtls_recv_sock(stru
 	if (is_vlan_dev(ndev))
 		ndev = vlan_dev_real_dev(ndev);
 
+	for_each_port(adap, i)
+		if (cdev->ports[i] == ndev)
+			found = true;
+
+	if (!found)
+		goto free_dst;
+
 	port_id = cxgb4_port_idx(ndev);
 
 	csk = chtls_sock_create(cdev);
@@ -1108,6 +1117,7 @@ static struct sock *chtls_recv_sock(stru
 free_csk:
 	chtls_sock_release(&csk->kref);
 free_dst:
+	neigh_release(n);
 	dst_release(dst);
 free_sk:
 	inet_csk_prepare_forced_close(newsk);

[PATCH 5.4 24/62] chtls: Replace skb_dequeue with skb_peek

[Greg Kroah-Hartman]

From: Ayush Sawal <ayush.sawal@chelsio.com>

[ Upstream commit a84b2c0d5fa23da6d6c8c0d5f5c93184a2744d3e ]

The skb is unlinked twice, one in __skb_dequeue in function
chtls_reset_synq() and another in cleanup_syn_rcv_conn().
So in this patch using skb_peek() instead of __skb_dequeue(),
so that unlink will be handled only in cleanup_syn_rcv_conn().

Fixes: cc35c88ae4db ("crypto : chtls - CPL handler definition")
Signed-off-by: Vinay Kumar Yadav <vinay.yadav@chelsio.com>
Signed-off-by: Ayush Sawal <ayush.sawal@chelsio.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/crypto/chelsio/chtls/chtls_cm.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/drivers/crypto/chelsio/chtls/chtls_cm.c
+++ b/drivers/crypto/chelsio/chtls/chtls_cm.c
@@ -577,7 +577,7 @@ static void chtls_reset_synq(struct list
 
 	while (!skb_queue_empty(&listen_ctx->synq)) {
 		struct chtls_sock *csk =
-			container_of((struct synq *)__skb_dequeue
+			container_of((struct synq *)skb_peek
 				(&listen_ctx->synq), struct chtls_sock, synq);
 		struct sock *child = csk->sk;
 

[PATCH 5.4 25/62] chtls: Added a check to avoid NULL pointer dereference

[Greg Kroah-Hartman]

From: Ayush Sawal <ayush.sawal@chelsio.com>

[ Upstream commit eade1e0a4fb31d48eeb1589d9bb859ae4dd6181d ]

In case of server removal lookup_stid() may return NULL pointer, which
is used as listen_ctx. So added a check before accessing this pointer.

Fixes: cc35c88ae4db ("crypto : chtls - CPL handler definition")
Signed-off-by: Vinay Kumar Yadav <vinay.yadav@chelsio.com>
Signed-off-by: Ayush Sawal <ayush.sawal@chelsio.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/crypto/chelsio/chtls/chtls_cm.c |    5 +++++
 1 file changed, 5 insertions(+)

--- a/drivers/crypto/chelsio/chtls/chtls_cm.c
+++ b/drivers/crypto/chelsio/chtls/chtls_cm.c
@@ -1453,6 +1453,11 @@ static int chtls_pass_establish(struct c
 			sk_wake_async(sk, 0, POLL_OUT);
 
 		data = lookup_stid(cdev->tids, stid);
+		if (!data) {
+			/* listening server close */
+			kfree_skb(skb);
+			goto unlock;
+		}
 		lsk = ((struct listen_ctx *)data)->lsk;
 
 		bh_lock_sock(lsk);

[PATCH 5.4 26/62] chtls: Fix chtls resources release sequence

[Greg Kroah-Hartman]

From: Ayush Sawal <ayush.sawal@chelsio.com>

[ Upstream commit 15ef6b0e30b354253e2c10b3836bc59767eb162b ]

CPL_ABORT_RPL is sent after releasing the resources by calling
chtls_release_resources(sk); and chtls_conn_done(sk);
eventually causing kernel panic. Fixing it by calling release
in appropriate order.

Fixes: cc35c88ae4db ("crypto : chtls - CPL handler definition")
Signed-off-by: Vinay Kumar Yadav <vinay.yadav@chelsio.com>
Signed-off-by: Ayush Sawal <ayush.sawal@chelsio.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/crypto/chelsio/chtls/chtls_cm.c |    9 ++++-----
 1 file changed, 4 insertions(+), 5 deletions(-)

--- a/drivers/crypto/chelsio/chtls/chtls_cm.c
+++ b/drivers/crypto/chelsio/chtls/chtls_cm.c
@@ -1905,9 +1905,9 @@ static void bl_abort_syn_rcv(struct sock
 	queue = csk->txq_idx;
 
 	skb->sk	= NULL;
-	do_abort_syn_rcv(child, lsk);
 	chtls_send_abort_rpl(child, skb, BLOG_SKB_CB(skb)->cdev,
 			     CPL_ABORT_NO_RST, queue);
+	do_abort_syn_rcv(child, lsk);
 }
 
 static int abort_syn_rcv(struct sock *sk, struct sk_buff *skb)
@@ -1937,8 +1937,8 @@ static int abort_syn_rcv(struct sock *sk
 	if (!sock_owned_by_user(psk)) {
 		int queue = csk->txq_idx;
 
-		do_abort_syn_rcv(sk, psk);
 		chtls_send_abort_rpl(sk, skb, cdev, CPL_ABORT_NO_RST, queue);
+		do_abort_syn_rcv(sk, psk);
 	} else {
 		skb->sk = sk;
 		BLOG_SKB_CB(skb)->backlog_rcv = bl_abort_syn_rcv;
@@ -1981,12 +1981,11 @@ static void chtls_abort_req_rss(struct s
 
 		if (sk->sk_state == TCP_SYN_RECV && !abort_syn_rcv(sk, skb))
 			return;
-
-		chtls_release_resources(sk);
-		chtls_conn_done(sk);
 	}
 
 	chtls_send_abort_rpl(sk, skb, csk->cdev, rst_status, queue);
+	chtls_release_resources(sk);
+	chtls_conn_done(sk);
 }
 
 static void chtls_abort_rpl_rss(struct sock *sk, struct sk_buff *skb)

[PATCH 5.4 27/62] x86/resctrl: Use an IPI instead of task_work_add() to update PQR_ASSOC MSR

[Greg Kroah-Hartman]

From: Fenghua Yu <fenghua.yu@intel.com>

commit ae28d1aae48a1258bd09a6f707ebb4231d79a761 upstream

Currently, when moving a task to a resource group the PQR_ASSOC MSR is
updated with the new closid and rmid in an added task callback. If the
task is running, the work is run as soon as possible. If the task is not
running, the work is executed later in the kernel exit path when the
kernel returns to the task again.

Updating the PQR_ASSOC MSR as soon as possible on the CPU a moved task
is running is the right thing to do. Queueing work for a task that is
not running is unnecessary (the PQR_ASSOC MSR is already updated when
the task is scheduled in) and causing system resource waste with the way
in which it is implemented: Work to update the PQR_ASSOC register is
queued every time the user writes a task id to the "tasks" file, even if
the task already belongs to the resource group.

This could result in multiple pending work items associated with a
single task even if they are all identical and even though only a single
update with most recent values is needed. Specifically, even if a task
is moved between different resource groups while it is sleeping then it
is only the last move that is relevant but yet a work item is queued
during each move.

This unnecessary queueing of work items could result in significant
system resource waste, especially on tasks sleeping for a long time.
For example, as demonstrated by Shakeel Butt in [1] writing the same
task id to the "tasks" file can quickly consume significant memory. The
same problem (wasted system resources) occurs when moving a task between
different resource groups.

As pointed out by Valentin Schneider in [2] there is an additional issue
with the way in which the queueing of work is done in that the task_struct
update is currently done after the work is queued, resulting in a race with
the register update possibly done before the data needed by the update is
available.

To solve these issues, update the PQR_ASSOC MSR in a synchronous way
right after the new closid and rmid are ready during the task movement,
only if the task is running. If a moved task is not running nothing
is done since the PQR_ASSOC MSR will be updated next time the task is
scheduled. This is the same way used to update the register when tasks
are moved as part of resource group removal.

[1] https://lore.kernel.org/lkml/CALvZod7E9zzHwenzf7objzGKsdBmVwTgEJ0nPgs0LUFU3SN5Pw@mail.gmail.com/
[2] https://lore.kernel.org/lkml/20201123022433.17905-1-valentin.schneider@arm.com

 [ bp: Massage commit message and drop the two update_task_closid_rmid()
   variants. ]

Fixes: e02737d5b826 ("x86/intel_rdt: Add tasks files")
Reported-by: Shakeel Butt <shakeelb@google.com>
Reported-by: Valentin Schneider <valentin.schneider@arm.com>
Signed-off-by: Fenghua Yu <fenghua.yu@intel.com>
Signed-off-by: Reinette Chatre <reinette.chatre@intel.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Reviewed-by: Tony Luck <tony.luck@intel.com>
Reviewed-by: James Morse <james.morse@arm.com>
Reviewed-by: Valentin Schneider <valentin.schneider@arm.com>
Cc: stable@vger.kernel.org
Link: https://lkml.kernel.org/r/17aa2fb38fc12ce7bb710106b3e7c7b45acb9e94.1608243147.git.reinette.chatre@intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 arch/x86/kernel/cpu/resctrl/rdtgroup.c |  108 +++++++++++++--------------------
 1 file changed, 43 insertions(+), 65 deletions(-)

--- a/arch/x86/kernel/cpu/resctrl/rdtgroup.c
+++ b/arch/x86/kernel/cpu/resctrl/rdtgroup.c
@@ -525,85 +525,63 @@ static void rdtgroup_remove(struct rdtgr
 	kfree(rdtgrp);
 }
 
-struct task_move_callback {
-	struct callback_head	work;
-	struct rdtgroup		*rdtgrp;
-};
-
-static void move_myself(struct callback_head *head)
+static void _update_task_closid_rmid(void *task)
 {
-	struct task_move_callback *callback;
-	struct rdtgroup *rdtgrp;
-
-	callback = container_of(head, struct task_move_callback, work);
-	rdtgrp = callback->rdtgrp;
-
 	/*
-	 * If resource group was deleted before this task work callback
-	 * was invoked, then assign the task to root group and free the
-	 * resource group.
+	 * If the task is still current on this CPU, update PQR_ASSOC MSR.
+	 * Otherwise, the MSR is updated when the task is scheduled in.
 	 */
-	if (atomic_dec_and_test(&rdtgrp->waitcount) &&
-	    (rdtgrp->flags & RDT_DELETED)) {
-		current->closid = 0;
-		current->rmid = 0;
-		rdtgroup_remove(rdtgrp);
-	}
-
-	preempt_disable();
-	/* update PQR_ASSOC MSR to make resource group go into effect */
-	resctrl_sched_in();
-	preempt_enable();
+	if (task == current)
+		resctrl_sched_in();
+}
 
-	kfree(callback);
+static void update_task_closid_rmid(struct task_struct *t)
+{
+	if (IS_ENABLED(CONFIG_SMP) && task_curr(t))
+		smp_call_function_single(task_cpu(t), _update_task_closid_rmid, t, 1);
+	else
+		_update_task_closid_rmid(t);
 }
 
 static int __rdtgroup_move_task(struct task_struct *tsk,
 				struct rdtgroup *rdtgrp)
 {
-	struct task_move_callback *callback;
-	int ret;
-
-	callback = kzalloc(sizeof(*callback), GFP_KERNEL);
-	if (!callback)
-		return -ENOMEM;
-	callback->work.func = move_myself;
-	callback->rdtgrp = rdtgrp;
-
 	/*
-	 * Take a refcount, so rdtgrp cannot be freed before the
-	 * callback has been invoked.
+	 * Set the task's closid/rmid before the PQR_ASSOC MSR can be
+	 * updated by them.
+	 *
+	 * For ctrl_mon groups, move both closid and rmid.
+	 * For monitor groups, can move the tasks only from
+	 * their parent CTRL group.
 	 */
-	atomic_inc(&rdtgrp->waitcount);
-	ret = task_work_add(tsk, &callback->work, true);
-	if (ret) {
-		/*
-		 * Task is exiting. Drop the refcount and free the callback.
-		 * No need to check the refcount as the group cannot be
-		 * deleted before the write function unlocks rdtgroup_mutex.
-		 */
-		atomic_dec(&rdtgrp->waitcount);
-		kfree(callback);
-		rdt_last_cmd_puts("Task exited\n");
-	} else {
-		/*
-		 * For ctrl_mon groups move both closid and rmid.
-		 * For monitor groups, can move the tasks only from
-		 * their parent CTRL group.
-		 */
-		if (rdtgrp->type == RDTCTRL_GROUP) {
-			tsk->closid = rdtgrp->closid;
+
+	if (rdtgrp->type == RDTCTRL_GROUP) {
+		tsk->closid = rdtgrp->closid;
+		tsk->rmid = rdtgrp->mon.rmid;
+	} else if (rdtgrp->type == RDTMON_GROUP) {
+		if (rdtgrp->mon.parent->closid == tsk->closid) {
 			tsk->rmid = rdtgrp->mon.rmid;
-		} else if (rdtgrp->type == RDTMON_GROUP) {
-			if (rdtgrp->mon.parent->closid == tsk->closid) {
-				tsk->rmid = rdtgrp->mon.rmid;
-			} else {
-				rdt_last_cmd_puts("Can't move task to different control group\n");
-				ret = -EINVAL;
-			}
+		} else {
+			rdt_last_cmd_puts("Can't move task to different control group\n");
+			return -EINVAL;
 		}
 	}
-	return ret;
+
+	/*
+	 * Ensure the task's closid and rmid are written before determining if
+	 * the task is current that will decide if it will be interrupted.
+	 */
+	barrier();
+
+	/*
+	 * By now, the task's closid and rmid are set. If the task is current
+	 * on a CPU, the PQR_ASSOC MSR needs to be updated to make the resource
+	 * group go into effect. If the task is not current, the MSR will be
+	 * updated when the task is scheduled in.
+	 */
+	update_task_closid_rmid(tsk);
+
+	return 0;
 }
 
 /**

[PATCH 5.4 28/62] x86/resctrl: Dont move a task to the same resource group

[Greg Kroah-Hartman]

From: Fenghua Yu <fenghua.yu@intel.com>

commit a0195f314a25582b38993bf30db11c300f4f4611 upstream

Shakeel Butt reported in [1] that a user can request a task to be moved
to a resource group even if the task is already in the group. It just
wastes time to do the move operation which could be costly to send IPI
to a different CPU.

Add a sanity check to ensure that the move operation only happens when
the task is not already in the resource group.

[1] https://lore.kernel.org/lkml/CALvZod7E9zzHwenzf7objzGKsdBmVwTgEJ0nPgs0LUFU3SN5Pw@mail.gmail.com/

Fixes: e02737d5b826 ("x86/intel_rdt: Add tasks files")
Reported-by: Shakeel Butt <shakeelb@google.com>
Signed-off-by: Fenghua Yu <fenghua.yu@intel.com>
Signed-off-by: Reinette Chatre <reinette.chatre@intel.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Reviewed-by: Tony Luck <tony.luck@intel.com>
Cc: stable@vger.kernel.org
Link: https://lkml.kernel.org/r/962ede65d8e95be793cb61102cca37f7bb018e66.1608243147.git.reinette.chatre@intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 arch/x86/kernel/cpu/resctrl/rdtgroup.c |    7 +++++++
 1 file changed, 7 insertions(+)

--- a/arch/x86/kernel/cpu/resctrl/rdtgroup.c
+++ b/arch/x86/kernel/cpu/resctrl/rdtgroup.c
@@ -546,6 +546,13 @@ static void update_task_closid_rmid(stru
 static int __rdtgroup_move_task(struct task_struct *tsk,
 				struct rdtgroup *rdtgrp)
 {
+	/* If the task is already in rdtgrp, no need to move the task. */
+	if ((rdtgrp->type == RDTCTRL_GROUP && tsk->closid == rdtgrp->closid &&
+	     tsk->rmid == rdtgrp->mon.rmid) ||
+	    (rdtgrp->type == RDTMON_GROUP && tsk->rmid == rdtgrp->mon.rmid &&
+	     tsk->closid == rdtgrp->mon.parent->closid))
+		return 0;
+
 	/*
 	 * Set the task's closid/rmid before the PQR_ASSOC MSR can be
 	 * updated by them.

[PATCH 5.4 29/62] exfat: Month timestamp metadata accidentally incremented

[Greg Kroah-Hartman]

From: "Valdis Klētnieks" <valdis.kletnieks@vt.edu>

The staging/exfat driver has departed, but a lot of distros are still tracking
5.4-stable, so we should fix this.

There was an 0/1 offset error in month handling for file metadata, causing
the month to get incremented on each reference to the file.

Thanks to Sebastian Gurtler for troubleshooting this, and Arpad Mueller
for bringing it to my attention.

Relevant discussions:
https://bugzilla.kernel.org/show_bug.cgi?id=210997
https://bugs.launchpad.net/ubuntu/+source/ubuntu-meta/+bug/1872504

Signed-off-by: Valdis Kletnieks <valdis.kletnieks@vt.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/staging/exfat/exfat_super.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/drivers/staging/exfat/exfat_super.c
+++ b/drivers/staging/exfat/exfat_super.c
@@ -59,7 +59,7 @@ static void exfat_write_super(struct sup
 /* Convert a FAT time/date pair to a UNIX date (seconds since 1 1 70). */
 static void exfat_time_fat2unix(struct timespec64 *ts, struct date_time_t *tp)
 {
-	ts->tv_sec = mktime64(tp->Year + 1980, tp->Month + 1, tp->Day,
+	ts->tv_sec = mktime64(tp->Year + 1980, tp->Month, tp->Day,
 			      tp->Hour, tp->Minute, tp->Second);
 
 	ts->tv_nsec = tp->MilliSecond * NSEC_PER_MSEC;

[PATCH 5.4 30/62] vmlinux.lds.h: Add PGO and AutoFDO input sections

[Greg Kroah-Hartman]

From: Nick Desaulniers <ndesaulniers@google.com>

commit eff8728fe69880d3f7983bec3fb6cea4c306261f upstream.

Basically, consider .text.{hot|unlikely|unknown}.* part of .text, too.

When compiling with profiling information (collected via PGO
instrumentations or AutoFDO sampling), Clang will separate code into
.text.hot, .text.unlikely, or .text.unknown sections based on profiling
information. After D79600 (clang-11), these sections will have a
trailing `.` suffix, ie.  .text.hot., .text.unlikely., .text.unknown..

When using -ffunction-sections together with profiling infomation,
either explicitly (FGKASLR) or implicitly (LTO), code may be placed in
sections following the convention:
.text.hot.<foo>, .text.unlikely.<bar>, .text.unknown.<baz>
where <foo>, <bar>, and <baz> are functions.  (This produces one section
per function; we generally try to merge these all back via linker script
so that we don't have 50k sections).

For the above cases, we need to teach our linker scripts that such
sections might exist and that we'd explicitly like them grouped
together, otherwise we can wind up with code outside of the
_stext/_etext boundaries that might not be mapped properly for some
architectures, resulting in boot failures.

If the linker script is not told about possible input sections, then
where the section is placed as output is a heuristic-laiden mess that's
non-portable between linkers (ie. BFD and LLD), and has resulted in many
hard to debug bugs.  Kees Cook is working on cleaning this up by adding
--orphan-handling=warn linker flag used in ARCH=powerpc to additional
architectures. In the case of linker scripts, borrowing from the Zen of
Python: explicit is better than implicit.

Also, ld.bfd's internal linker script considers .text.hot AND
.text.hot.* to be part of .text, as well as .text.unlikely and
.text.unlikely.*. I didn't see support for .text.unknown.*, and didn't
see Clang producing such code in our kernel builds, but I see code in
LLVM that can produce such section names if profiling information is
missing. That may point to a larger issue with generating or collecting
profiles, but I would much rather be safe and explicit than have to
debug yet another issue related to orphan section placement.

Reported-by: Jian Cai <jiancai@google.com>
Suggested-by: Fāng-ruì Sòng <maskray@google.com>
Signed-off-by: Nick Desaulniers <ndesaulniers@google.com>
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Tested-by: Luis Lozano <llozano@google.com>
Tested-by: Manoj Gupta <manojgupta@google.com>
Acked-by: Kees Cook <keescook@chromium.org>
Cc: linux-arch@vger.kernel.org
Cc: stable@vger.kernel.org
Link: https://sourceware.org/git/?p=binutils-gdb.git;a=commitdiff;h=add44f8d5c5c05e08b11e033127a744d61c26aee
Link: https://sourceware.org/git/?p=binutils-gdb.git;a=commitdiff;h=1de778ed23ce7492c523d5850c6c6dbb34152655
Link: https://reviews.llvm.org/D79600
Link: https://bugs.chromium.org/p/chromium/issues/detail?id=1084760
Link: https://lore.kernel.org/r/20200821194310.3089815-7-keescook@chromium.org

Debugged-by: Luis Lozano <llozano@google.com>
[nc: Resolve small conflict due to lack of NOINSTR_TEXT]
Signed-off-by: Nathan Chancellor <natechancellor@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 include/asm-generic/vmlinux.lds.h |    5 ++++-
 1 file changed, 4 insertions(+), 1 deletion(-)

--- a/include/asm-generic/vmlinux.lds.h
+++ b/include/asm-generic/vmlinux.lds.h
@@ -520,7 +520,10 @@
  */
 #define TEXT_TEXT							\
 		ALIGN_FUNCTION();					\
-		*(.text.hot TEXT_MAIN .text.fixup .text.unlikely)	\
+		*(.text.hot .text.hot.*)				\
+		*(TEXT_MAIN .text.fixup)				\
+		*(.text.unlikely .text.unlikely.*)			\
+		*(.text.unknown .text.unknown.*)			\
 		*(.text..refcount)					\
 		*(.ref.text)						\
 	MEM_KEEP(init.text*)						\

[PATCH 5.4 31/62] iio: imu: st_lsm6dsx: fix edge-trigger interrupts

[Greg Kroah-Hartman]

From: Lorenzo Bianconi <lorenzo@kernel.org>

commit 3f9bce7a22a3f8ac9d885c9d75bc45569f24ac8b upstream

If we are using edge IRQs, new samples can arrive while processing
current interrupt since there are no hw guarantees the irq line
stays "low" long enough to properly detect the new interrupt.
In this case the new sample will be missed.
Polling FIFO status register in st_lsm6dsx_handler_thread routine
allow us to read new samples even if the interrupt arrives while
processing previous data and the timeslot where the line is "low"
is too short to be properly detected.

Fixes: 89ca88a7cdf2 ("iio: imu: st_lsm6dsx: support active-low interrupts")
Fixes: 290a6ce11d93 ("iio: imu: add support to lsm6dsx driver")
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Link: https://lore.kernel.org/r/5e93cda7dc1e665f5685c53ad8e9ea71dbae782d.1605378871.git.lorenzo@kernel.org
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
[sudip: manual backport to old irq handler path]
Signed-off-by: Sudip Mukherjee <sudipm.mukherjee@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_buffer.c |   26 ++++++++++++++++++++-----
 1 file changed, 21 insertions(+), 5 deletions(-)

--- a/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_buffer.c
+++ b/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_buffer.c
@@ -664,13 +664,29 @@ static irqreturn_t st_lsm6dsx_handler_ir
 static irqreturn_t st_lsm6dsx_handler_thread(int irq, void *private)
 {
 	struct st_lsm6dsx_hw *hw = private;
-	int count;
+	int fifo_len = 0, len;
 
-	mutex_lock(&hw->fifo_lock);
-	count = hw->settings->fifo_ops.read_fifo(hw);
-	mutex_unlock(&hw->fifo_lock);
+	/*
+	 * If we are using edge IRQs, new samples can arrive while
+	 * processing current interrupt since there are no hw
+	 * guarantees the irq line stays "low" long enough to properly
+	 * detect the new interrupt. In this case the new sample will
+	 * be missed.
+	 * Polling FIFO status register allow us to read new
+	 * samples even if the interrupt arrives while processing
+	 * previous data and the timeslot where the line is "low" is
+	 * too short to be properly detected.
+	 */
+	do {
+		mutex_lock(&hw->fifo_lock);
+		len = hw->settings->fifo_ops.read_fifo(hw);
+		mutex_unlock(&hw->fifo_lock);
 
-	return count ? IRQ_HANDLED : IRQ_NONE;
+		if (len > 0)
+			fifo_len += len;
+	} while (len > 0);
+
+	return fifo_len ? IRQ_HANDLED : IRQ_NONE;
 }
 
 static int st_lsm6dsx_buffer_preenable(struct iio_dev *iio_dev)

[PATCH 5.4 32/62] HID: wacom: Fix memory leakage caused by kfifo_alloc

[Greg Kroah-Hartman]

From: Ping Cheng <pinglinux@gmail.com>

commit 37309f47e2f5674f3e86cb765312ace42cfcedf5 upstream.

As reported by syzbot below, kfifo_alloc'd memory would not be freed
if a non-zero return value is triggered in wacom_probe. This patch
creates and uses devm_kfifo_alloc to allocate and free itself.

BUG: memory leak
unreferenced object 0xffff88810dc44a00 (size 512):
  comm "kworker/1:2", pid 3674, jiffies 4294943617 (age 14.100s)
  hex dump (first 32 bytes):
   00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  ................
   00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  ................
  backtrace:
   [<0000000023e1afac>] kmalloc_array include/linux/slab.h:592 [inline]
   [<0000000023e1afac>] __kfifo_alloc+0xad/0x100 lib/kfifo.c:43
   [<00000000c477f737>] wacom_probe+0x1a1/0x3b0 drivers/hid/wacom_sys.c:2727
   [<00000000b3109aca>] hid_device_probe+0x16b/0x210 drivers/hid/hid-core.c:2281
   [<00000000aff7c640>] really_probe+0x159/0x480 drivers/base/dd.c:554
   [<00000000778d0bc3>] driver_probe_device+0x84/0x100 drivers/base/dd.c:738
   [<000000005108dbb5>] __device_attach_driver+0xee/0x110 drivers/base/dd.c:844
   [<00000000efb7c59e>] bus_for_each_drv+0xb7/0x100 drivers/base/bus.c:431
   [<0000000024ab1590>] __device_attach+0x122/0x250 drivers/base/dd.c:912
   [<000000004c7ac048>] bus_probe_device+0xc6/0xe0 drivers/base/bus.c:491
   [<00000000b93050a3>] device_add+0x5ac/0xc30 drivers/base/core.c:2936
   [<00000000e5b46ea5>] hid_add_device+0x151/0x390 drivers/hid/hid-core.c:2437
   [<00000000c6add147>] usbhid_probe+0x412/0x560 drivers/hid/usbhid/hid-core.c:1407
   [<00000000c33acdb4>] usb_probe_interface+0x177/0x370 drivers/usb/core/driver.c:396
   [<00000000aff7c640>] really_probe+0x159/0x480 drivers/base/dd.c:554
   [<00000000778d0bc3>] driver_probe_device+0x84/0x100 drivers/base/dd.c:738
   [<000000005108dbb5>] __device_attach_driver+0xee/0x110 drivers/base/dd.c:844

https://syzkaller.appspot.com/bug?extid=5b49c9695968d7250a26

Reported-by: syzbot+5b49c9695968d7250a26@syzkaller.appspotmail.com
Signed-off-by: Ping Cheng <ping.cheng@wacom.com>
Reviewed-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/hid/wacom_sys.c |   35 ++++++++++++++++++++++++++++++++---
 1 file changed, 32 insertions(+), 3 deletions(-)

--- a/drivers/hid/wacom_sys.c
+++ b/drivers/hid/wacom_sys.c
@@ -1270,6 +1270,37 @@ static int wacom_devm_sysfs_create_group
 					       group);
 }
 
+static void wacom_devm_kfifo_release(struct device *dev, void *res)
+{
+	struct kfifo_rec_ptr_2 *devres = res;
+
+	kfifo_free(devres);
+}
+
+static int wacom_devm_kfifo_alloc(struct wacom *wacom)
+{
+	struct wacom_wac *wacom_wac = &wacom->wacom_wac;
+	struct kfifo_rec_ptr_2 *pen_fifo = &wacom_wac->pen_fifo;
+	int error;
+
+	pen_fifo = devres_alloc(wacom_devm_kfifo_release,
+			      sizeof(struct kfifo_rec_ptr_2),
+			      GFP_KERNEL);
+
+	if (!pen_fifo)
+		return -ENOMEM;
+
+	error = kfifo_alloc(pen_fifo, WACOM_PKGLEN_MAX, GFP_KERNEL);
+	if (error) {
+		devres_free(pen_fifo);
+		return error;
+	}
+
+	devres_add(&wacom->hdev->dev, pen_fifo);
+
+	return 0;
+}
+
 enum led_brightness wacom_leds_brightness_get(struct wacom_led *led)
 {
 	struct wacom *wacom = led->wacom;
@@ -2724,7 +2755,7 @@ static int wacom_probe(struct hid_device
 	if (features->check_for_hid_type && features->hid_type != hdev->type)
 		return -ENODEV;
 
-	error = kfifo_alloc(&wacom_wac->pen_fifo, WACOM_PKGLEN_MAX, GFP_KERNEL);
+	error = wacom_devm_kfifo_alloc(wacom);
 	if (error)
 		return error;
 
@@ -2786,8 +2817,6 @@ static void wacom_remove(struct hid_devi
 
 	if (wacom->wacom_wac.features.type != REMOTE)
 		wacom_release_resources(wacom);
-
-	kfifo_free(&wacom_wac->pen_fifo);
 }
 
 #ifdef CONFIG_PM

[PATCH 5.4 33/62] ARM: OMAP2+: omap_device: fix idling of devices during probe

[Greg Kroah-Hartman]

From: Andreas Kemnade <andreas@kemnade.info>

commit ec76c2eea903947202098090bbe07a739b5246e9 upstream.

On the GTA04A5 od->_driver_status was not set to BUS_NOTIFY_BIND_DRIVER
during probe of the second mmc used for wifi. Therefore
omap_device_late_idle idled the device during probing causing oopses when
accessing the registers.

It was not set because od->_state was set to OMAP_DEVICE_STATE_IDLE
in the notifier callback. Therefore set od->_driver_status also in that
case.

This came apparent after commit 21b2cec61c04 ("mmc: Set
PROBE_PREFER_ASYNCHRONOUS for drivers that existed in v4.4") causing this
oops:

omap_hsmmc 480b4000.mmc: omap_device_late_idle: enabled but no driver.  Idling
8<--- cut here ---
Unhandled fault: external abort on non-linefetch (0x1028) at 0xfa0b402c
...
(omap_hsmmc_set_bus_width) from [<c07996bc>] (omap_hsmmc_set_ios+0x11c/0x258)
(omap_hsmmc_set_ios) from [<c077b2b0>] (mmc_power_up.part.8+0x3c/0xd0)
(mmc_power_up.part.8) from [<c077c14c>] (mmc_start_host+0x88/0x9c)
(mmc_start_host) from [<c077d284>] (mmc_add_host+0x58/0x84)
(mmc_add_host) from [<c0799190>] (omap_hsmmc_probe+0x5fc/0x8c0)
(omap_hsmmc_probe) from [<c0666728>] (platform_drv_probe+0x48/0x98)
(platform_drv_probe) from [<c066457c>] (really_probe+0x1dc/0x3b4)

Fixes: 04abaf07f6d5 ("ARM: OMAP2+: omap_device: Sync omap_device and pm_runtime after probe defer")
Fixes: 21b2cec61c04 ("mmc: Set PROBE_PREFER_ASYNCHRONOUS for drivers that existed in v4.4")
Acked-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Andreas Kemnade <andreas@kemnade.info>
[tony@atomide.com: left out extra parens, trimmed description stack trace]
Signed-off-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 arch/arm/mach-omap2/omap_device.c |    8 +++++---
 1 file changed, 5 insertions(+), 3 deletions(-)

--- a/arch/arm/mach-omap2/omap_device.c
+++ b/arch/arm/mach-omap2/omap_device.c
@@ -234,10 +234,12 @@ static int _omap_device_notifier_call(st
 		break;
 	case BUS_NOTIFY_BIND_DRIVER:
 		od = to_omap_device(pdev);
-		if (od && (od->_state == OMAP_DEVICE_STATE_ENABLED) &&
-		    pm_runtime_status_suspended(dev)) {
+		if (od) {
 			od->_driver_status = BUS_NOTIFY_BIND_DRIVER;
-			pm_runtime_set_active(dev);
+			if (od->_state == OMAP_DEVICE_STATE_ENABLED &&
+			    pm_runtime_status_suspended(dev)) {
+				pm_runtime_set_active(dev);
+			}
 		}
 		break;
 	case BUS_NOTIFY_ADD_DEVICE:

[PATCH 5.4 34/62] i2c: sprd: use a specific timeout to avoid system hang up issue

[Greg Kroah-Hartman]

From: Chunyan Zhang <chunyan.zhang@unisoc.com>

commit 0b884fe71f9ee6a5df35e677154256ea2099ebb8 upstream.

If the i2c device SCL bus being pulled up due to some exception before
message transfer done, the system cannot receive the completing interrupt
signal any more, it would not exit waiting loop until MAX_SCHEDULE_TIMEOUT
jiffies eclipse, that would make the system seemed hang up. To avoid that
happen, this patch adds a specific timeout for message transfer.

Fixes: 8b9ec0719834 ("i2c: Add Spreadtrum I2C controller driver")
Signed-off-by: Linhua Xu <linhua.xu@unisoc.com>
Signed-off-by: Chunyan Zhang <chunyan.zhang@unisoc.com>
[wsa: changed errno to ETIMEDOUT]
Signed-off-by: Wolfram Sang <wsa@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/i2c/busses/i2c-sprd.c |    8 +++++++-
 1 file changed, 7 insertions(+), 1 deletion(-)

--- a/drivers/i2c/busses/i2c-sprd.c
+++ b/drivers/i2c/busses/i2c-sprd.c
@@ -72,6 +72,8 @@
 
 /* timeout (ms) for pm runtime autosuspend */
 #define SPRD_I2C_PM_TIMEOUT	1000
+/* timeout (ms) for transfer message */
+#define I2C_XFER_TIMEOUT	1000
 
 /* SPRD i2c data structure */
 struct sprd_i2c {
@@ -244,6 +246,7 @@ static int sprd_i2c_handle_msg(struct i2
 			       struct i2c_msg *msg, bool is_last_msg)
 {
 	struct sprd_i2c *i2c_dev = i2c_adap->algo_data;
+	unsigned long time_left;
 
 	i2c_dev->msg = msg;
 	i2c_dev->buf = msg->buf;
@@ -273,7 +276,10 @@ static int sprd_i2c_handle_msg(struct i2
 
 	sprd_i2c_opt_start(i2c_dev);
 
-	wait_for_completion(&i2c_dev->complete);
+	time_left = wait_for_completion_timeout(&i2c_dev->complete,
+				msecs_to_jiffies(I2C_XFER_TIMEOUT));
+	if (!time_left)
+		return -ETIMEDOUT;
 
 	return i2c_dev->err;
 }

[PATCH 5.4 35/62] dmaengine: dw-edma: Fix use after free in dw_edma_alloc_chunk()

[Greg Kroah-Hartman]

From: Dan Carpenter <dan.carpenter@oracle.com>

commit 595a334148449bd1d27cf5d6fcb3b0d718cb1b9f upstream.

If the dw_edma_alloc_burst() function fails then we free "chunk" but
it's still on the "desc->chunk->list" list so it will lead to a use
after free.  Also the "->chunks_alloc" count is incremented when it
shouldn't be.

In current kernels small allocations are guaranteed to succeed and
dw_edma_alloc_burst() can't fail so this will not actually affect
runtime.

Fixes: e63d79d1ffcd ("dmaengine: Add Synopsys eDMA IP core driver")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Acked-by: Gustavo Pimentel <gustavo.pimentel@synopsys.com>
Link: https://lore.kernel.org/r/X9dTBFrUPEvvW7qc@mwanda
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/dma/dw-edma/dw-edma-core.c |    4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

--- a/drivers/dma/dw-edma/dw-edma-core.c
+++ b/drivers/dma/dw-edma/dw-edma-core.c
@@ -85,12 +85,12 @@ static struct dw_edma_chunk *dw_edma_all
 
 	if (desc->chunk) {
 		/* Create and add new element into the linked list */
-		desc->chunks_alloc++;
-		list_add_tail(&chunk->list, &desc->chunk->list);
 		if (!dw_edma_alloc_burst(chunk)) {
 			kfree(chunk);
 			return NULL;
 		}
+		desc->chunks_alloc++;
+		list_add_tail(&chunk->list, &desc->chunk->list);
 	} else {
 		/* List head */
 		chunk->burst = NULL;

[PATCH 5.4 36/62] can: tcan4x5x: fix bittiming const, use common bittiming from m_can driver

[Greg Kroah-Hartman]

From: Marc Kleine-Budde <mkl@pengutronix.de>

commit aee2b3ccc8a63d1cd7da6a8a153d1f3712d40826 upstream.

According to the TCAN4550 datasheet "SLLSF91 - DECEMBER 2018" the tcan4x5x has
the same bittiming constants as a m_can revision 3.2.x/3.3.0.

The tcan4x5x chip I'm using identifies itself as m_can revision 3.2.1, so
remove the tcan4x5x specific bittiming values and rely on the values in the
m_can driver, which are selected according to core revision.

Fixes: 5443c226ba91 ("can: tcan4x5x: Add tcan4x5x driver to the kernel")
Cc: Dan Murphy <dmurphy@ti.com>
Reviewed-by: Sean Nyekjaer <sean@geanix.com>
Link: https://lore.kernel.org/r/20201215103238.524029-3-mkl@pengutronix.de
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/net/can/m_can/tcan4x5x.c |   26 --------------------------
 1 file changed, 26 deletions(-)

--- a/drivers/net/can/m_can/tcan4x5x.c
+++ b/drivers/net/can/m_can/tcan4x5x.c
@@ -126,30 +126,6 @@ struct tcan4x5x_priv {
 	int reg_offset;
 };
 
-static struct can_bittiming_const tcan4x5x_bittiming_const = {
-	.name = DEVICE_NAME,
-	.tseg1_min = 2,
-	.tseg1_max = 31,
-	.tseg2_min = 2,
-	.tseg2_max = 16,
-	.sjw_max = 16,
-	.brp_min = 1,
-	.brp_max = 32,
-	.brp_inc = 1,
-};
-
-static struct can_bittiming_const tcan4x5x_data_bittiming_const = {
-	.name = DEVICE_NAME,
-	.tseg1_min = 1,
-	.tseg1_max = 32,
-	.tseg2_min = 1,
-	.tseg2_max = 16,
-	.sjw_max = 16,
-	.brp_min = 1,
-	.brp_max = 32,
-	.brp_inc = 1,
-};
-
 static void tcan4x5x_check_wake(struct tcan4x5x_priv *priv)
 {
 	int wake_state = 0;
@@ -449,8 +425,6 @@ static int tcan4x5x_can_probe(struct spi
 	mcan_class->dev = &spi->dev;
 	mcan_class->ops = &tcan4x5x_ops;
 	mcan_class->is_peripheral = true;
-	mcan_class->bit_timing = &tcan4x5x_bittiming_const;
-	mcan_class->data_timing = &tcan4x5x_data_bittiming_const;
 	mcan_class->net->irq = spi->irq;
 
 	spi_set_drvdata(spi, priv);

[PATCH 5.4 37/62] can: m_can: m_can_class_unregister(): remove erroneous m_can_clk_stop()

[Greg Kroah-Hartman]

From: Marc Kleine-Budde <mkl@pengutronix.de>

commit c4aec381ab98c9189d47b935832541d520f1f67f upstream.

In m_can_class_register() the clock is started, but stopped on exit. When
calling m_can_class_unregister(), the clock is stopped a second time.

This patch removes the erroneous m_can_clk_stop() in  m_can_class_unregister().

Fixes: f524f829b75a ("can: m_can: Create a m_can platform framework")
Cc: Dan Murphy <dmurphy@ti.com>
Cc: Sriram Dash <sriram.dash@samsung.com>
Reviewed-by: Sean Nyekjaer <sean@geanix.com>
Link: https://lore.kernel.org/r/20201215103238.524029-2-mkl@pengutronix.de
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/net/can/m_can/m_can.c |    2 --
 1 file changed, 2 deletions(-)

--- a/drivers/net/can/m_can/m_can.c
+++ b/drivers/net/can/m_can/m_can.c
@@ -1868,8 +1868,6 @@ void m_can_class_unregister(struct m_can
 {
 	unregister_candev(m_can_dev->net);
 
-	m_can_clk_stop(m_can_dev);
-
 	free_candev(m_can_dev->net);
 }
 EXPORT_SYMBOL_GPL(m_can_class_unregister);

[PATCH 5.4 38/62] can: kvaser_pciefd: select CONFIG_CRC32

[Greg Kroah-Hartman]

From: Arnd Bergmann <arnd@arndb.de>

commit 1d48595c786b1b9dc6be301e8d7f6fc74e9882aa upstream.

Without crc32, this driver fails to link:

arm-linux-gnueabi-ld: drivers/net/can/kvaser_pciefd.o: in function `kvaser_pciefd_probe':
kvaser_pciefd.c:(.text+0x2b0): undefined reference to `crc32_be'

Fixes: 26ad340e582d ("can: kvaser_pciefd: Add driver for Kvaser PCIEcan devices")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Marc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/net/can/Kconfig |    1 +
 1 file changed, 1 insertion(+)

--- a/drivers/net/can/Kconfig
+++ b/drivers/net/can/Kconfig
@@ -123,6 +123,7 @@ config CAN_JANZ_ICAN3
 config CAN_KVASER_PCIEFD
 	depends on PCI
 	tristate "Kvaser PCIe FD cards"
+	select CRC32
 	  help
 	  This is a driver for the Kvaser PCI Express CAN FD family.
 

[PATCH 5.4 39/62] cpufreq: powernow-k8: pass policy rather than use cpufreq_cpu_get()

[Greg Kroah-Hartman]

From: Colin Ian King <colin.king@canonical.com>

commit 943bdd0cecad06da8392a33093230e30e501eccc upstream.

Currently there is an unlikely case where cpufreq_cpu_get() returns a
NULL policy and this will cause a NULL pointer dereference later on.

Fix this by passing the policy to transition_frequency_fidvid() from
the caller and hence eliminating the need for the cpufreq_cpu_get()
and cpufreq_cpu_put().

Thanks to Viresh Kumar for suggesting the fix.

Addresses-Coverity: ("Dereference null return")
Fixes: b43a7ffbf33b ("cpufreq: Notify all policy->cpus in cpufreq_notify_transition()")
Suggested-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/cpufreq/powernow-k8.c |    9 +++------
 1 file changed, 3 insertions(+), 6 deletions(-)

--- a/drivers/cpufreq/powernow-k8.c
+++ b/drivers/cpufreq/powernow-k8.c
@@ -878,9 +878,9 @@ static int get_transition_latency(struct
 
 /* Take a frequency, and issue the fid/vid transition command */
 static int transition_frequency_fidvid(struct powernow_k8_data *data,
-		unsigned int index)
+		unsigned int index,
+		struct cpufreq_policy *policy)
 {
-	struct cpufreq_policy *policy;
 	u32 fid = 0;
 	u32 vid = 0;
 	int res;
@@ -912,9 +912,6 @@ static int transition_frequency_fidvid(s
 	freqs.old = find_khz_freq_from_fid(data->currfid);
 	freqs.new = find_khz_freq_from_fid(fid);
 
-	policy = cpufreq_cpu_get(smp_processor_id());
-	cpufreq_cpu_put(policy);
-
 	cpufreq_freq_transition_begin(policy, &freqs);
 	res = transition_fid_vid(data, fid, vid);
 	cpufreq_freq_transition_end(policy, &freqs, res);
@@ -969,7 +966,7 @@ static long powernowk8_target_fn(void *a
 
 	powernow_k8_acpi_pst_values(data, newstate);
 
-	ret = transition_frequency_fidvid(data, newstate);
+	ret = transition_frequency_fidvid(data, newstate, pol);
 
 	if (ret) {
 		pr_err("transition frequency failed\n");

[PATCH 5.4 40/62] spi: spi-geni-qcom: Fix geni_spi_isr() NULL dereference in timeout case

[Greg Kroah-Hartman]

From: Douglas Anderson <dianders@chromium.org>

commit 4aa1464acbe3697710279a4bd65cb4801ed30425 upstream.

In commit 7ba9bdcb91f6 ("spi: spi-geni-qcom: Don't keep a local state
variable") we changed handle_fifo_timeout() so that we set
"mas->cur_xfer" to NULL to make absolutely sure that we don't mess
with the buffers from the previous transfer in the timeout case.

Unfortunately, this caused the IRQ handler to dereference NULL in some
cases.  One case:

  CPU0                           CPU1
  ----                           ----
                                 setup_fifo_xfer()
                                  geni_se_setup_m_cmd()
                                 <hardware starts transfer>
                                 <transfer completes in hardware>
                                 <hardware sets M_RX_FIFO_WATERMARK_EN in m_irq>
                                 ...
                                 handle_fifo_timeout()
                                  spin_lock_irq(mas->lock)
                                  mas->cur_xfer = NULL
                                  geni_se_cancel_m_cmd()
                                  spin_unlock_irq(mas->lock)

  geni_spi_isr()
   spin_lock(mas->lock)
   if (m_irq & M_RX_FIFO_WATERMARK_EN)
    geni_spi_handle_rx()
     mas->cur_xfer NULL dereference!

tl;dr: Seriously delayed interrupts for RX/TX can lead to timeout
handling setting mas->cur_xfer to NULL.

Let's check for the NULL transfer in the TX and RX cases and reset the
watermark or clear out the fifo respectively to put the hardware back
into a sane state.

NOTE: things still could get confused if we get timeouts all the way
through handle_fifo_timeout() and then start a new transfer because
interrupts from the old transfer / cancel / abort could still be
pending.  A future patch will help this corner case.

Fixes: 561de45f72bd ("spi: spi-geni-qcom: Add SPI driver support for GENI based QUP")
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Link: https://lore.kernel.org/r/20201217142842.v3.1.I99ee04f0cb823415df59bd4f550d6ff5756e43d6@changeid
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/spi/spi-geni-qcom.c |   14 ++++++++++++++
 1 file changed, 14 insertions(+)

--- a/drivers/spi/spi-geni-qcom.c
+++ b/drivers/spi/spi-geni-qcom.c
@@ -415,6 +415,12 @@ static void geni_spi_handle_tx(struct sp
 	unsigned int bytes_per_fifo_word = geni_byte_per_fifo_word(mas);
 	unsigned int i = 0;
 
+	/* Stop the watermark IRQ if nothing to send */
+	if (!mas->cur_xfer) {
+		writel(0, se->base + SE_GENI_TX_WATERMARK_REG);
+		return false;
+	}
+
 	max_bytes = (mas->tx_fifo_depth - mas->tx_wm) * bytes_per_fifo_word;
 	if (mas->tx_rem_bytes < max_bytes)
 		max_bytes = mas->tx_rem_bytes;
@@ -454,6 +460,14 @@ static void geni_spi_handle_rx(struct sp
 		if (rx_last_byte_valid && rx_last_byte_valid < 4)
 			rx_bytes -= bytes_per_fifo_word - rx_last_byte_valid;
 	}
+
+	/* Clear out the FIFO and bail if nowhere to put it */
+	if (!mas->cur_xfer) {
+		for (i = 0; i < DIV_ROUND_UP(rx_bytes, bytes_per_fifo_word); i++)
+			readl(se->base + SE_GENI_RX_FIFOn);
+		return;
+	}
+
 	if (mas->rx_rem_bytes < rx_bytes)
 		rx_bytes = mas->rx_rem_bytes;
 

Re: [PATCH 5.4 40/62] spi: spi-geni-qcom: Fix geni_spi_isr() NULL dereference in timeout case

[Nathan Chancellor]

On Fri, Jan 15, 2021 at 01:28:02PM +0100, Greg Kroah-Hartman wrote:
> From: Douglas Anderson <dianders@chromium.org>
> 
> commit 4aa1464acbe3697710279a4bd65cb4801ed30425 upstream.
> 
> In commit 7ba9bdcb91f6 ("spi: spi-geni-qcom: Don't keep a local state
> variable") we changed handle_fifo_timeout() so that we set
> "mas->cur_xfer" to NULL to make absolutely sure that we don't mess
> with the buffers from the previous transfer in the timeout case.
> 
> Unfortunately, this caused the IRQ handler to dereference NULL in some
> cases.  One case:
> 
>   CPU0                           CPU1
>   ----                           ----
>                                  setup_fifo_xfer()
>                                   geni_se_setup_m_cmd()
>                                  <hardware starts transfer>
>                                  <transfer completes in hardware>
>                                  <hardware sets M_RX_FIFO_WATERMARK_EN in m_irq>
>                                  ...
>                                  handle_fifo_timeout()
>                                   spin_lock_irq(mas->lock)
>                                   mas->cur_xfer = NULL
>                                   geni_se_cancel_m_cmd()
>                                   spin_unlock_irq(mas->lock)
> 
>   geni_spi_isr()
>    spin_lock(mas->lock)
>    if (m_irq & M_RX_FIFO_WATERMARK_EN)
>     geni_spi_handle_rx()
>      mas->cur_xfer NULL dereference!
> 
> tl;dr: Seriously delayed interrupts for RX/TX can lead to timeout
> handling setting mas->cur_xfer to NULL.
> 
> Let's check for the NULL transfer in the TX and RX cases and reset the
> watermark or clear out the fifo respectively to put the hardware back
> into a sane state.
> 
> NOTE: things still could get confused if we get timeouts all the way
> through handle_fifo_timeout() and then start a new transfer because
> interrupts from the old transfer / cancel / abort could still be
> pending.  A future patch will help this corner case.
> 
> Fixes: 561de45f72bd ("spi: spi-geni-qcom: Add SPI driver support for GENI based QUP")
> Signed-off-by: Douglas Anderson <dianders@chromium.org>
> Reviewed-by: Stephen Boyd <swboyd@chromium.org>
> Link: https://lore.kernel.org/r/20201217142842.v3.1.I99ee04f0cb823415df59bd4f550d6ff5756e43d6@changeid
> Signed-off-by: Mark Brown <broonie@kernel.org>
> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
> 
> ---
>  drivers/spi/spi-geni-qcom.c |   14 ++++++++++++++
>  1 file changed, 14 insertions(+)
> 
> --- a/drivers/spi/spi-geni-qcom.c
> +++ b/drivers/spi/spi-geni-qcom.c
> @@ -415,6 +415,12 @@ static void geni_spi_handle_tx(struct sp
>  	unsigned int bytes_per_fifo_word = geni_byte_per_fifo_word(mas);
>  	unsigned int i = 0;
>  
> +	/* Stop the watermark IRQ if nothing to send */
> +	if (!mas->cur_xfer) {
> +		writel(0, se->base + SE_GENI_TX_WATERMARK_REG);
> +		return false;
> +	}
> +
>  	max_bytes = (mas->tx_fifo_depth - mas->tx_wm) * bytes_per_fifo_word;
>  	if (mas->tx_rem_bytes < max_bytes)
>  		max_bytes = mas->tx_rem_bytes;
> @@ -454,6 +460,14 @@ static void geni_spi_handle_rx(struct sp
>  		if (rx_last_byte_valid && rx_last_byte_valid < 4)
>  			rx_bytes -= bytes_per_fifo_word - rx_last_byte_valid;
>  	}
> +
> +	/* Clear out the FIFO and bail if nowhere to put it */
> +	if (!mas->cur_xfer) {
> +		for (i = 0; i < DIV_ROUND_UP(rx_bytes, bytes_per_fifo_word); i++)
> +			readl(se->base + SE_GENI_RX_FIFOn);
> +		return;
> +	}
> +
>  	if (mas->rx_rem_bytes < rx_bytes)
>  		rx_bytes = mas->rx_rem_bytes;
>  
> 
> 

This commit breaks the build with clang:

drivers/spi/spi-geni-qcom.c:421:3: error: void function
'geni_spi_handle_tx' should not return a value [-Wreturn-type]
                return false;
                ^      ~~~~~
1 error generated.

It looks like commit 6d66507d9b55 ("spi: spi-geni-qcom: Don't wait to
start 1st transfer if transmitting") would resolve this.

It might be worth picking up commit 172aad81a882 ("kbuild: enforce
-Werror=return-type") so that GCC behaves like clang does.

Cheers,
Nathan

Re: [PATCH 5.4 40/62] spi: spi-geni-qcom: Fix geni_spi_isr() NULL dereference in timeout case

[Greg Kroah-Hartman]

On Sat, Jan 16, 2021 at 11:48:51AM -0700, Nathan Chancellor wrote:
> On Fri, Jan 15, 2021 at 01:28:02PM +0100, Greg Kroah-Hartman wrote:
> > From: Douglas Anderson <dianders@chromium.org>
> > 
> > commit 4aa1464acbe3697710279a4bd65cb4801ed30425 upstream.
> > 
> > In commit 7ba9bdcb91f6 ("spi: spi-geni-qcom: Don't keep a local state
> > variable") we changed handle_fifo_timeout() so that we set
> > "mas->cur_xfer" to NULL to make absolutely sure that we don't mess
> > with the buffers from the previous transfer in the timeout case.
> > 
> > Unfortunately, this caused the IRQ handler to dereference NULL in some
> > cases.  One case:
> > 
> >   CPU0                           CPU1
> >   ----                           ----
> >                                  setup_fifo_xfer()
> >                                   geni_se_setup_m_cmd()
> >                                  <hardware starts transfer>
> >                                  <transfer completes in hardware>
> >                                  <hardware sets M_RX_FIFO_WATERMARK_EN in m_irq>
> >                                  ...
> >                                  handle_fifo_timeout()
> >                                   spin_lock_irq(mas->lock)
> >                                   mas->cur_xfer = NULL
> >                                   geni_se_cancel_m_cmd()
> >                                   spin_unlock_irq(mas->lock)
> > 
> >   geni_spi_isr()
> >    spin_lock(mas->lock)
> >    if (m_irq & M_RX_FIFO_WATERMARK_EN)
> >     geni_spi_handle_rx()
> >      mas->cur_xfer NULL dereference!
> > 
> > tl;dr: Seriously delayed interrupts for RX/TX can lead to timeout
> > handling setting mas->cur_xfer to NULL.
> > 
> > Let's check for the NULL transfer in the TX and RX cases and reset the
> > watermark or clear out the fifo respectively to put the hardware back
> > into a sane state.
> > 
> > NOTE: things still could get confused if we get timeouts all the way
> > through handle_fifo_timeout() and then start a new transfer because
> > interrupts from the old transfer / cancel / abort could still be
> > pending.  A future patch will help this corner case.
> > 
> > Fixes: 561de45f72bd ("spi: spi-geni-qcom: Add SPI driver support for GENI based QUP")
> > Signed-off-by: Douglas Anderson <dianders@chromium.org>
> > Reviewed-by: Stephen Boyd <swboyd@chromium.org>
> > Link: https://lore.kernel.org/r/20201217142842.v3.1.I99ee04f0cb823415df59bd4f550d6ff5756e43d6@changeid
> > Signed-off-by: Mark Brown <broonie@kernel.org>
> > Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
> > 
> > ---
> >  drivers/spi/spi-geni-qcom.c |   14 ++++++++++++++
> >  1 file changed, 14 insertions(+)
> > 
> > --- a/drivers/spi/spi-geni-qcom.c
> > +++ b/drivers/spi/spi-geni-qcom.c
> > @@ -415,6 +415,12 @@ static void geni_spi_handle_tx(struct sp
> >  	unsigned int bytes_per_fifo_word = geni_byte_per_fifo_word(mas);
> >  	unsigned int i = 0;
> >  
> > +	/* Stop the watermark IRQ if nothing to send */
> > +	if (!mas->cur_xfer) {
> > +		writel(0, se->base + SE_GENI_TX_WATERMARK_REG);
> > +		return false;
> > +	}
> > +
> >  	max_bytes = (mas->tx_fifo_depth - mas->tx_wm) * bytes_per_fifo_word;
> >  	if (mas->tx_rem_bytes < max_bytes)
> >  		max_bytes = mas->tx_rem_bytes;
> > @@ -454,6 +460,14 @@ static void geni_spi_handle_rx(struct sp
> >  		if (rx_last_byte_valid && rx_last_byte_valid < 4)
> >  			rx_bytes -= bytes_per_fifo_word - rx_last_byte_valid;
> >  	}
> > +
> > +	/* Clear out the FIFO and bail if nowhere to put it */
> > +	if (!mas->cur_xfer) {
> > +		for (i = 0; i < DIV_ROUND_UP(rx_bytes, bytes_per_fifo_word); i++)
> > +			readl(se->base + SE_GENI_RX_FIFOn);
> > +		return;
> > +	}
> > +
> >  	if (mas->rx_rem_bytes < rx_bytes)
> >  		rx_bytes = mas->rx_rem_bytes;
> >  
> > 
> > 
> 
> This commit breaks the build with clang:
> 
> drivers/spi/spi-geni-qcom.c:421:3: error: void function
> 'geni_spi_handle_tx' should not return a value [-Wreturn-type]
>                 return false;
>                 ^      ~~~~~
> 1 error generated.
> 
> It looks like commit 6d66507d9b55 ("spi: spi-geni-qcom: Don't wait to
> start 1st transfer if transmitting") would resolve this.
> 
> It might be worth picking up commit 172aad81a882 ("kbuild: enforce
> -Werror=return-type") so that GCC behaves like clang does.

Argh, I thought I had dropped this before, but no.  Good catch, I've
dropped it now.

And yes, that might be a good patch to backport (the gcc one), I'll
queue that up next round, thanks.

greg k-h

[PATCH 5.4 41/62] spi: stm32: FIFO threshold level - fix align packet size

[Greg Kroah-Hartman]

From: Roman Guskov <rguskov@dh-electronics.com>

commit a590370d918fc66c62df6620445791fbe840344a upstream.

if cur_bpw <= 8 and xfer_len < 4 then the value of fthlv will be 1 and
SPI registers content may have been lost.

* If SPI data register is accessed as a 16-bit register and DSIZE <= 8bit,
  better to select FTHLV = 2, 4, 6 etc

* If SPI data register is accessed as a 32-bit register and DSIZE > 8bit,
  better to select FTHLV = 2, 4, 6 etc, while if DSIZE <= 8bit,
  better to select FTHLV = 4, 8, 12 etc

Signed-off-by: Roman Guskov <rguskov@dh-electronics.com>
Fixes: dcbe0d84dfa5 ("spi: add driver for STM32 SPI controller")
Reviewed-by: Marek Vasut <marex@denx.de>
Link: https://lore.kernel.org/r/20201221123532.27272-1-rguskov@dh-electronics.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/spi/spi-stm32.c |    4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

--- a/drivers/spi/spi-stm32.c
+++ b/drivers/spi/spi-stm32.c
@@ -494,9 +494,9 @@ static u32 stm32h7_spi_prepare_fthlv(str
 
 	/* align packet size with data registers access */
 	if (spi->cur_bpw > 8)
-		fthlv -= (fthlv % 2); /* multiple of 2 */
+		fthlv += (fthlv % 2) ? 1 : 0;
 	else
-		fthlv -= (fthlv % 4); /* multiple of 4 */
+		fthlv += (fthlv % 4) ? (4 - (fthlv % 4)) : 0;
 
 	if (!fthlv)
 		fthlv = 1;

[PATCH 5.4 42/62] i2c: i801: Fix the i2c-mux gpiod_lookup_table not being properly terminated

[Greg Kroah-Hartman]

From: Hans de Goede <hdegoede@redhat.com>

commit 0b3ea2a06de1f52ea30865e227e109a5fd3b6214 upstream.

gpiod_add_lookup_table() expects the gpiod_lookup_table->table passed to
it to be terminated with a zero-ed out entry.

So we need to allocate one more entry then we will use.

Fixes: d308dfbf62ef ("i2c: mux/i801: Switch to use descriptor passing")
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Acked-by: Jean Delvare <jdelvare@suse.de>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/i2c/busses/i2c-i801.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/drivers/i2c/busses/i2c-i801.c
+++ b/drivers/i2c/busses/i2c-i801.c
@@ -1424,7 +1424,7 @@ static int i801_add_mux(struct i801_priv
 
 	/* Register GPIO descriptor lookup table */
 	lookup = devm_kzalloc(dev,
-			      struct_size(lookup, table, mux_config->n_gpios),
+			      struct_size(lookup, table, mux_config->n_gpios + 1),
 			      GFP_KERNEL);
 	if (!lookup)
 		return -ENOMEM;

[PATCH 5.4 43/62] dmaengine: mediatek: mtk-hsdma: Fix a resource leak in the error handling path of the probe function

[Greg Kroah-Hartman]

From: Christophe JAILLET <christophe.jaillet@wanadoo.fr>

commit 33cbd54dc515cc04b5a603603414222b4bb1448d upstream.

'mtk_hsdma_hw_deinit()' should be called in the error handling path of the
probe function to undo a previous 'mtk_hsdma_hw_init()' call, as already
done in the remove function.

Fixes: 548c4597e984 ("dmaengine: mediatek: Add MediaTek High-Speed DMA controller for MT7622 and MT7623 SoC")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Link: https://lore.kernel.org/r/20201219124718.182664-1-christophe.jaillet@wanadoo.fr
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/dma/mediatek/mtk-hsdma.c |    1 +
 1 file changed, 1 insertion(+)

--- a/drivers/dma/mediatek/mtk-hsdma.c
+++ b/drivers/dma/mediatek/mtk-hsdma.c
@@ -1007,6 +1007,7 @@ static int mtk_hsdma_probe(struct platfo
 	return 0;
 
 err_free:
+	mtk_hsdma_hw_deinit(hsdma);
 	of_dma_controller_free(pdev->dev.of_node);
 err_unregister:
 	dma_async_device_unregister(dd);

[PATCH 5.4 44/62] dmaengine: xilinx_dma: check dma_async_device_register return value

[Greg Kroah-Hartman]

From: Shravya Kumbham <shravya.kumbham@xilinx.com>

commit 99974aedbd73523969afb09f33c6e3047cd0ddae upstream.

dma_async_device_register() can return non-zero error code. Add
condition to check the return value of dma_async_device_register
function and handle the error path.

Addresses-Coverity: Event check_return.
Fixes: 9cd4360de609 ("dma: Add Xilinx AXI Video Direct Memory Access Engine driver support")
Signed-off-by: Shravya Kumbham <shravya.kumbham@xilinx.com>
Signed-off-by: Radhey Shyam Pandey <radhey.shyam.pandey@xilinx.com>
Link: https://lore.kernel.org/r/1608722462-29519-2-git-send-email-radhey.shyam.pandey@xilinx.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/dma/xilinx/xilinx_dma.c |    6 +++++-
 1 file changed, 5 insertions(+), 1 deletion(-)

--- a/drivers/dma/xilinx/xilinx_dma.c
+++ b/drivers/dma/xilinx/xilinx_dma.c
@@ -2742,7 +2742,11 @@ static int xilinx_dma_probe(struct platf
 	}
 
 	/* Register the DMA engine with the core */
-	dma_async_device_register(&xdev->common);
+	err = dma_async_device_register(&xdev->common);
+	if (err) {
+		dev_err(xdev->dev, "failed to register the dma device\n");
+		goto error;
+	}
 
 	err = of_dma_controller_register(node, of_dma_xilinx_xlate,
 					 xdev);

[PATCH 5.4 45/62] dmaengine: xilinx_dma: fix incompatible param warning in _child_probe()

[Greg Kroah-Hartman]

From: Shravya Kumbham <shravya.kumbham@xilinx.com>

commit faeb0731be0a31e2246b21a85fa7dabbd750101d upstream.

In xilinx_dma_child_probe function, the nr_channels variable is
passed to of_property_read_u32() which expects an u32 return value
pointer. Modify the nr_channels variable type from int to u32 to
fix the incompatible parameter coverity warning.

Addresses-Coverity: Event incompatible_param.
Fixes: 1a9e7a03c761 ("dmaengine: vdma: Add support for mulit-channel dma mode")
Signed-off-by: Shravya Kumbham <shravya.kumbham@xilinx.com>
Signed-off-by: Radhey Shyam Pandey <radhey.shyam.pandey@xilinx.com>
Link: https://lore.kernel.org/r/1608722462-29519-3-git-send-email-radhey.shyam.pandey@xilinx.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/dma/xilinx/xilinx_dma.c |    3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

--- a/drivers/dma/xilinx/xilinx_dma.c
+++ b/drivers/dma/xilinx/xilinx_dma.c
@@ -2543,7 +2543,8 @@ static int xilinx_dma_chan_probe(struct
 static int xilinx_dma_child_probe(struct xilinx_dma_device *xdev,
 				    struct device_node *node)
 {
-	int ret, i, nr_channels = 1;
+	int ret, i;
+	u32 nr_channels = 1;
 
 	ret = of_property_read_u32(node, "dma-channels", &nr_channels);
 	if ((ret < 0) && xdev->mcdma)

[PATCH 5.4 46/62] dmaengine: xilinx_dma: fix mixed_enum_type coverity warning

[Greg Kroah-Hartman]

From: Shravya Kumbham <shravya.kumbham@xilinx.com>

commit 2d5efea64472469117dc1a9a39530069e95b21e9 upstream.

Typecast the fls(width -1) with (enum dmaengine_alignment) in
xilinx_dma_chan_probe function to fix the coverity warning.

Addresses-Coverity: Event mixed_enum_type.
Fixes: 9cd4360de609 ("dma: Add Xilinx AXI Video Direct Memory Access Engine driver support")
Signed-off-by: Shravya Kumbham <shravya.kumbham@xilinx.com>
Signed-off-by: Radhey Shyam Pandey <radhey.shyam.pandey@xilinx.com>
Link: https://lore.kernel.org/r/1608722462-29519-4-git-send-email-radhey.shyam.pandey@xilinx.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/dma/xilinx/xilinx_dma.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/drivers/dma/xilinx/xilinx_dma.c
+++ b/drivers/dma/xilinx/xilinx_dma.c
@@ -2431,7 +2431,7 @@ static int xilinx_dma_chan_probe(struct
 		has_dre = false;
 
 	if (!has_dre)
-		xdev->common.copy_align = fls(width - 1);
+		xdev->common.copy_align = (enum dmaengine_alignment)fls(width - 1);
 
 	if (of_device_is_compatible(node, "xlnx,axi-vdma-mm2s-channel") ||
 	    of_device_is_compatible(node, "xlnx,axi-dma-mm2s-channel") ||

[PATCH 5.4 47/62] qed: select CONFIG_CRC32

[Greg Kroah-Hartman]

From: Arnd Bergmann <arnd@arndb.de>

commit 2860d45a589818dd8ffd90cdc4bcf77f36a5a6be upstream.

Without this, the driver fails to link:

lpc_eth.c:(.text+0x1934): undefined reference to `crc32_le'
arm-linux-gnueabi-ld: drivers/net/ethernet/qlogic/qed/qed_debug.o: in function `qed_grc_dump':
qed_debug.c:(.text+0x4068): undefined reference to `crc32_le'
arm-linux-gnueabi-ld: drivers/net/ethernet/qlogic/qed/qed_debug.o: in function `qed_idle_chk_dump':
qed_debug.c:(.text+0x51fc): undefined reference to `crc32_le'
arm-linux-gnueabi-ld: drivers/net/ethernet/qlogic/qed/qed_debug.o: in function `qed_mcp_trace_dump':
qed_debug.c:(.text+0x6000): undefined reference to `crc32_le'
arm-linux-gnueabi-ld: drivers/net/ethernet/qlogic/qed/qed_debug.o: in function `qed_dbg_reg_fifo_dump':
qed_debug.c:(.text+0x66cc): undefined reference to `crc32_le'
arm-linux-gnueabi-ld: drivers/net/ethernet/qlogic/qed/qed_debug.o:qed_debug.c:(.text+0x6aa4): more undefined references to `crc32_le' follow

Fixes: 7a4b21b7d1f0 ("qed: Add nvram selftest")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/net/ethernet/qlogic/Kconfig |    1 +
 1 file changed, 1 insertion(+)

--- a/drivers/net/ethernet/qlogic/Kconfig
+++ b/drivers/net/ethernet/qlogic/Kconfig
@@ -78,6 +78,7 @@ config QED
 	depends on PCI
 	select ZLIB_INFLATE
 	select CRC8
+	select CRC32
 	select NET_DEVLINK
 	---help---
 	  This enables the support for ...

[PATCH 5.4 48/62] wil6210: select CONFIG_CRC32

[Greg Kroah-Hartman]

From: Arnd Bergmann <arnd@arndb.de>

commit e186620d7bf11b274b985b839c38266d7918cc05 upstream.

Without crc32, the driver fails to link:

arm-linux-gnueabi-ld: drivers/net/wireless/ath/wil6210/fw.o: in function `wil_fw_verify':
fw.c:(.text+0x74c): undefined reference to `crc32_le'
arm-linux-gnueabi-ld: drivers/net/wireless/ath/wil6210/fw.o:fw.c:(.text+0x758): more undefined references to `crc32_le' follow

Fixes: 151a9706503f ("wil6210: firmware download")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/net/wireless/ath/wil6210/Kconfig |    1 +
 1 file changed, 1 insertion(+)

--- a/drivers/net/wireless/ath/wil6210/Kconfig
+++ b/drivers/net/wireless/ath/wil6210/Kconfig
@@ -2,6 +2,7 @@
 config WIL6210
 	tristate "Wilocity 60g WiFi card wil6210 support"
 	select WANT_DEV_COREDUMP
+	select CRC32
 	depends on CFG80211
 	depends on PCI
 	default n

[PATCH 5.4 49/62] block: rsxx: select CONFIG_CRC32

[Greg Kroah-Hartman]

From: Arnd Bergmann <arnd@arndb.de>

commit 36a106a4c1c100d55ba3d32a21ef748cfcd4fa99 upstream.

Without crc32, the driver fails to link:

arm-linux-gnueabi-ld: drivers/block/rsxx/config.o: in function `rsxx_load_config':
config.c:(.text+0x124): undefined reference to `crc32_le'

Fixes: 8722ff8cdbfa ("block: IBM RamSan 70/80 device driver")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/block/Kconfig |    1 +
 1 file changed, 1 insertion(+)

--- a/drivers/block/Kconfig
+++ b/drivers/block/Kconfig
@@ -461,6 +461,7 @@ config BLK_DEV_RBD
 config BLK_DEV_RSXX
 	tristate "IBM Flash Adapter 900GB Full Height PCIe Device Driver"
 	depends on PCI
+	select CRC32
 	help
 	  Device driver for IBM's high speed PCIe SSD
 	  storage device: Flash Adapter 900GB Full Height.

[PATCH 5.4 50/62] lightnvm: select CONFIG_CRC32

[Greg Kroah-Hartman]

From: Arnd Bergmann <arnd@arndb.de>

commit 19cd3403cb0d522dd5e10188eef85817de29e26e upstream.

Without CRC32 support, this fails to link:

arm-linux-gnueabi-ld: drivers/lightnvm/pblk-init.o: in function `pblk_init':
pblk-init.c:(.text+0x2654): undefined reference to `crc32_le'
arm-linux-gnueabi-ld: drivers/lightnvm/pblk-init.o: in function `pblk_exit':
pblk-init.c:(.text+0x2a7c): undefined reference to `crc32_le'

Fixes: a4bd217b4326 ("lightnvm: physical block device (pblk) target")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/lightnvm/Kconfig |    1 +
 1 file changed, 1 insertion(+)

--- a/drivers/lightnvm/Kconfig
+++ b/drivers/lightnvm/Kconfig
@@ -19,6 +19,7 @@ if NVM
 
 config NVM_PBLK
 	tristate "Physical Block Device Open-Channel SSD target"
+	select CRC32
 	help
 	  Allows an open-channel SSD to be exposed as a block device to the
 	  host. The target assumes the device exposes raw flash and must be

[PATCH 5.4 51/62] iommu/intel: Fix memleak in intel_irq_remapping_alloc

[Greg Kroah-Hartman]

From: Dinghao Liu <dinghao.liu@zju.edu.cn>

commit ff2b46d7cff80d27d82f7f3252711f4ca1666129 upstream.

When irq_domain_get_irq_data() or irqd_cfg() fails
at i == 0, data allocated by kzalloc() has not been
freed before returning, which leads to memleak.

Fixes: b106ee63abcc ("irq_remapping/vt-d: Enhance Intel IR driver to support hierarchical irqdomains")
Signed-off-by: Dinghao Liu <dinghao.liu@zju.edu.cn>
Acked-by: Lu Baolu <baolu.lu@linux.intel.com>
Link: https://lore.kernel.org/r/20210105051837.32118-1-dinghao.liu@zju.edu.cn
Signed-off-by: Will Deacon <will@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/iommu/intel_irq_remapping.c |    2 ++
 1 file changed, 2 insertions(+)

--- a/drivers/iommu/intel_irq_remapping.c
+++ b/drivers/iommu/intel_irq_remapping.c
@@ -1400,6 +1400,8 @@ static int intel_irq_remapping_alloc(str
 		irq_data = irq_domain_get_irq_data(domain, virq + i);
 		irq_cfg = irqd_cfg(irq_data);
 		if (!irq_data || !irq_cfg) {
+			if (!i)
+				kfree(data);
 			ret = -EINVAL;
 			goto out_free_data;
 		}

[PATCH 5.4 52/62] bpftool: Fix compilation failure for net.o with older glibc

[Greg Kroah-Hartman]

From: Alan Maguire <alan.maguire@oracle.com>

commit 6f02b540d7597f357bc6ee711346761045d4e108 upstream.

For older glibc ~2.17, #include'ing both linux/if.h and net/if.h
fails due to complaints about redefinition of interface flags:

  CC       net.o
In file included from net.c:13:0:
/usr/include/linux/if.h:71:2: error: redeclaration of enumerator ‘IFF_UP’
  IFF_UP    = 1<<0,  /* sysfs */
  ^
/usr/include/net/if.h:44:5: note: previous definition of ‘IFF_UP’ was here
     IFF_UP = 0x1,  /* Interface is up.  */

The issue was fixed in kernel headers in [1], but since compilation
of net.c picks up system headers the problem can recur.

Dropping #include <linux/if.h> resolves the issue and it is
not needed for compilation anyhow.

[1] https://lore.kernel.org/netdev/1461512707-23058-1-git-send-email-mikko.rapeli__34748.27880641$1462831734$gmane$org@iki.fi/

Fixes: f6f3bac08ff9 ("tools/bpf: bpftool: add net support")
Signed-off-by: Alan Maguire <alan.maguire@oracle.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Martin KaFai Lau <kafai@fb.com>
Link: https://lore.kernel.org/bpf/1609948746-15369-1-git-send-email-alan.maguire@oracle.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 tools/bpf/bpftool/net.c |    1 -
 1 file changed, 1 deletion(-)

--- a/tools/bpf/bpftool/net.c
+++ b/tools/bpf/bpftool/net.c
@@ -9,7 +9,6 @@
 #include <unistd.h>
 #include <libbpf.h>
 #include <net/if.h>
-#include <linux/if.h>
 #include <linux/rtnetlink.h>
 #include <linux/tc_act/tc_bpf.h>
 #include <sys/socket.h>

[PATCH 5.4 53/62] net/mlx5e: Fix memleak in mlx5e_create_l2_table_groups

[Greg Kroah-Hartman]

From: Dinghao Liu <dinghao.liu@zju.edu.cn>

commit 5b0bb12c58ac7d22e05b5bfdaa30a116c8c32e32 upstream.

When mlx5_create_flow_group() fails, ft->g should be
freed just like when kvzalloc() fails. The caller of
mlx5e_create_l2_table_groups() does not catch this
issue on failure, which leads to memleak.

Fixes: 33cfaaa8f36f ("net/mlx5e: Split the main flow steering table")
Signed-off-by: Dinghao Liu <dinghao.liu@zju.edu.cn>
Reviewed-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/net/ethernet/mellanox/mlx5/core/en_fs.c |    1 +
 1 file changed, 1 insertion(+)

--- a/drivers/net/ethernet/mellanox/mlx5/core/en_fs.c
+++ b/drivers/net/ethernet/mellanox/mlx5/core/en_fs.c
@@ -1346,6 +1346,7 @@ err_destroy_groups:
 	ft->g[ft->num_groups] = NULL;
 	mlx5e_destroy_groups(ft);
 	kvfree(in);
+	kfree(ft->g);
 
 	return err;
 }

[PATCH 5.4 54/62] net/mlx5e: Fix two double free cases

[Greg Kroah-Hartman]

From: Dinghao Liu <dinghao.liu@zju.edu.cn>

commit 7a6eb072a9548492ead086f3e820e9aac71c7138 upstream.

mlx5e_create_ttc_table_groups() frees ft->g on failure of
kvzalloc(), but such failure will be caught by its caller
in mlx5e_create_ttc_table() and ft->g will be freed again
in mlx5e_destroy_flow_table(). The same issue also occurs
in mlx5e_create_ttc_table_groups(). Set ft->g to NULL after
kfree() to avoid double free.

Fixes: 7b3722fa9ef6 ("net/mlx5e: Support RSS for GRE tunneled packets")
Fixes: 33cfaaa8f36f ("net/mlx5e: Split the main flow steering table")
Signed-off-by: Dinghao Liu <dinghao.liu@zju.edu.cn>
Reviewed-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/net/ethernet/mellanox/mlx5/core/en_fs.c |    2 ++
 1 file changed, 2 insertions(+)

--- a/drivers/net/ethernet/mellanox/mlx5/core/en_fs.c
+++ b/drivers/net/ethernet/mellanox/mlx5/core/en_fs.c
@@ -927,6 +927,7 @@ static int mlx5e_create_ttc_table_groups
 	in = kvzalloc(inlen, GFP_KERNEL);
 	if (!in) {
 		kfree(ft->g);
+		ft->g = NULL;
 		return -ENOMEM;
 	}
 
@@ -1067,6 +1068,7 @@ static int mlx5e_create_inner_ttc_table_
 	in = kvzalloc(inlen, GFP_KERNEL);
 	if (!in) {
 		kfree(ft->g);
+		ft->g = NULL;
 		return -ENOMEM;
 	}
 

[PATCH 5.4 55/62] regmap: debugfs: Fix a memory leak when calling regmap_attach_dev

[Greg Kroah-Hartman]

From: Xiaolei Wang <xiaolei.wang@windriver.com>

commit cffa4b2122f5f3e53cf3d529bbc74651f95856d5 upstream.

After initializing the regmap through
syscon_regmap_lookup_by_compatible, then regmap_attach_dev to the
device, because the debugfs_name has been allocated, there is no
need to redistribute it again

unreferenced object 0xd8399b80 (size 64):
  comm "swapper/0", pid 1, jiffies 4294937641 (age 278.590s)
  hex dump (first 32 bytes):
	64 75 6d 6d 79 2d 69 6f 6d 75 78 63 2d 67 70 72
dummy-iomuxc-gpr
	40 32 30 65 34 30 30 30 00 7f 52 5b d8 7e 42 69
@20e4000..R[.~Bi
  backtrace:
    [<ca384d6f>] kasprintf+0x2c/0x54
    [<6ad3bbc2>] regmap_debugfs_init+0xdc/0x2fc
    [<bc4181da>] __regmap_init+0xc38/0xd88
    [<1f7e0609>] of_syscon_register+0x168/0x294
    [<735e8766>] device_node_get_regmap+0x6c/0x98
    [<d96c8982>] imx6ul_init_machine+0x20/0x88
    [<0456565b>] customize_machine+0x1c/0x30
    [<d07393d8>] do_one_initcall+0x80/0x3ac
    [<7e584867>] kernel_init_freeable+0x170/0x1f0
    [<80074741>] kernel_init+0x8/0x120
    [<285d6f28>] ret_from_fork+0x14/0x20
    [<00000000>] 0x0

Fixes: 9b947a13e7f6 ("regmap: use debugfs even when no device")
Signed-off-by: Xiaolei Wang <xiaolei.wang@windriver.com>
Link: https://lore.kernel.org/r/20201229105046.41984-1-xiaolei.wang@windriver.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/base/regmap/regmap-debugfs.c |   11 +++++++++--
 1 file changed, 9 insertions(+), 2 deletions(-)

--- a/drivers/base/regmap/regmap-debugfs.c
+++ b/drivers/base/regmap/regmap-debugfs.c
@@ -583,18 +583,25 @@ void regmap_debugfs_init(struct regmap *
 		devname = dev_name(map->dev);
 
 	if (name) {
-		map->debugfs_name = kasprintf(GFP_KERNEL, "%s-%s",
+		if (!map->debugfs_name) {
+			map->debugfs_name = kasprintf(GFP_KERNEL, "%s-%s",
 					      devname, name);
+			if (!map->debugfs_name)
+				return;
+		}
 		name = map->debugfs_name;
 	} else {
 		name = devname;
 	}
 
 	if (!strcmp(name, "dummy")) {
-		kfree(map->debugfs_name);
+		if (!map->debugfs_name)
+			kfree(map->debugfs_name);
 
 		map->debugfs_name = kasprintf(GFP_KERNEL, "dummy%d",
 						dummy_index);
+		if (!map->debugfs_name)
+				return;
 		name = map->debugfs_name;
 		dummy_index++;
 	}

[PATCH 5.4 56/62] wan: ds26522: select CONFIG_BITREVERSE

[Greg Kroah-Hartman]

From: Arnd Bergmann <arnd@arndb.de>

commit 69931e11288520c250152180ecf9b6ac5e6e40ed upstream.

Without this, the driver runs into a link failure

arm-linux-gnueabi-ld: drivers/net/wan/slic_ds26522.o: in function `slic_ds26522_probe':
slic_ds26522.c:(.text+0x100c): undefined reference to `byte_rev_table'
arm-linux-gnueabi-ld: slic_ds26522.c:(.text+0x1cdc): undefined reference to `byte_rev_table'
arm-linux-gnueabi-ld: drivers/net/wan/slic_ds26522.o: in function `slic_write':
slic_ds26522.c:(.text+0x1e4c): undefined reference to `byte_rev_table'

Fixes: c37d4a0085c5 ("Maxim/driver: Add driver for maxim ds26522")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/net/wan/Kconfig |    1 +
 1 file changed, 1 insertion(+)

--- a/drivers/net/wan/Kconfig
+++ b/drivers/net/wan/Kconfig
@@ -282,6 +282,7 @@ config SLIC_DS26522
 	tristate "Slic Maxim ds26522 card support"
 	depends on SPI
 	depends on FSL_SOC || ARCH_MXC || ARCH_LAYERSCAPE || COMPILE_TEST
+	select BITREVERSE
 	help
 	  This module initializes and configures the slic maxim card
 	  in T1 or E1 mode.

[PATCH 5.4 57/62] regulator: qcom-rpmh-regulator: correct hfsmps515 definition

[Greg Kroah-Hartman]

From: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>

commit df6b92fa40050e59ea89784294bf6d04c0c47705 upstream.

According to the datasheet pm8009's HFS515 regulators have 16mV
resolution rather than declared 1.6 mV. Correct the resolution.

Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Fixes: 06369bcc15a1 ("regulator: qcom-rpmh: Add support for SM8150")
Reviewed-by: Vinod Koul <vkoul@kernel.org>
Link: https://lore.kernel.org/r/20201231122348.637917-3-dmitry.baryshkov@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/regulator/qcom-rpmh-regulator.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/drivers/regulator/qcom-rpmh-regulator.c
+++ b/drivers/regulator/qcom-rpmh-regulator.c
@@ -726,7 +726,7 @@ static const struct rpmh_vreg_hw_data pm
 static const struct rpmh_vreg_hw_data pmic5_hfsmps515 = {
 	.regulator_type = VRM,
 	.ops = &rpmh_regulator_vrm_ops,
-	.voltage_range = REGULATOR_LINEAR_RANGE(2800000, 0, 4, 1600),
+	.voltage_range = REGULATOR_LINEAR_RANGE(2800000, 0, 4, 16000),
 	.n_voltages = 5,
 	.pmic_mode_map = pmic_mode_map_pmic5_smps,
 	.of_map_mode = rpmh_regulator_pmic4_smps_of_map_mode,

[PATCH 5.4 58/62] net: mvpp2: disable force link UP during port init procedure

[Greg Kroah-Hartman]

From: Stefan Chulski <stefanc@marvell.com>

commit 87508224485323ce2d4e7fb929ec80f51adcc238 upstream.

Force link UP can be enabled by bootloader during tftpboot
and breaks NFS support.
Force link UP disabled during port init procedure.

Fixes: f84bf386f395 ("net: mvpp2: initialize the GoP")
Signed-off-by: Stefan Chulski <stefanc@marvell.com>
Acked-by: Marcin Wojtas <mw@semihalf.com>
Link: https://lore.kernel.org/r/1608216735-14501-1-git-send-email-stefanc@marvell.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/net/ethernet/marvell/mvpp2/mvpp2_main.c |   14 +++++++++++++-
 1 file changed, 13 insertions(+), 1 deletion(-)

--- a/drivers/net/ethernet/marvell/mvpp2/mvpp2_main.c
+++ b/drivers/net/ethernet/marvell/mvpp2/mvpp2_main.c
@@ -4545,7 +4545,7 @@ static int mvpp2_port_init(struct mvpp2_
 	struct mvpp2 *priv = port->priv;
 	struct mvpp2_txq_pcpu *txq_pcpu;
 	unsigned int thread;
-	int queue, err;
+	int queue, err, val;
 
 	/* Checks for hardware constraints */
 	if (port->first_rxq + port->nrxqs >
@@ -4559,6 +4559,18 @@ static int mvpp2_port_init(struct mvpp2_
 	mvpp2_egress_disable(port);
 	mvpp2_port_disable(port);
 
+	if (mvpp2_is_xlg(port->phy_interface)) {
+		val = readl(port->base + MVPP22_XLG_CTRL0_REG);
+		val &= ~MVPP22_XLG_CTRL0_FORCE_LINK_PASS;
+		val |= MVPP22_XLG_CTRL0_FORCE_LINK_DOWN;
+		writel(val, port->base + MVPP22_XLG_CTRL0_REG);
+	} else {
+		val = readl(port->base + MVPP2_GMAC_AUTONEG_CONFIG);
+		val &= ~MVPP2_GMAC_FORCE_LINK_PASS;
+		val |= MVPP2_GMAC_FORCE_LINK_DOWN;
+		writel(val, port->base + MVPP2_GMAC_AUTONEG_CONFIG);
+	}
+
 	port->tx_time_coal = MVPP2_TXDONE_COAL_USEC;
 
 	port->txqs = devm_kcalloc(dev, port->ntxqs, sizeof(*port->txqs),

[PATCH 5.4 59/62] KVM: arm64: Dont access PMCR_EL0 when no PMU is available

[Greg Kroah-Hartman]

From: Marc Zyngier <maz@kernel.org>

commit 2a5f1b67ec577fb1544b563086e0377f095f88e2 upstream.

We reset the guest's view of PMCR_EL0 unconditionally, based on
the host's view of this register. It is however legal for an
implementation not to provide any PMU, resulting in an UNDEF.

The obvious fix is to skip the reset of this shadow register
when no PMU is available, sidestepping the issue entirely.
If no PMU is available, the guest is not able to request
a virtual PMU anyway, so not doing nothing is the right thing
to do!

It is unlikely that this bug can hit any HW implementation
though, as they all provide a PMU. It has been found using nested
virt with the host KVM not implementing the PMU itself.

Fixes: ab9468340d2bc ("arm64: KVM: Add access handler for PMCR register")
Reviewed-by: Alexandru Elisei <alexandru.elisei@arm.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20201210083059.1277162-1-maz@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 arch/arm64/kvm/sys_regs.c |    4 ++++
 1 file changed, 4 insertions(+)

--- a/arch/arm64/kvm/sys_regs.c
+++ b/arch/arm64/kvm/sys_regs.c
@@ -625,6 +625,10 @@ static void reset_pmcr(struct kvm_vcpu *
 {
 	u64 pmcr, val;
 
+	/* No PMU available, PMCR_EL0 may UNDEF... */
+	if (!kvm_arm_support_pmu_v3())
+		return;
+
 	pmcr = read_sysreg(pmcr_el0);
 	/*
 	 * Writable bits of PMCR_EL0 (ARMV8_PMU_PMCR_MASK) are reset to UNKNOWN

[PATCH 5.4 60/62] block: fix use-after-free in disk_part_iter_next

[Greg Kroah-Hartman]

From: Ming Lei <ming.lei@redhat.com>

commit aebf5db917055b38f4945ed6d621d9f07a44ff30 upstream.

Make sure that bdgrab() is done on the 'block_device' instance before
referring to it for avoiding use-after-free.

Cc: <stable@vger.kernel.org>
Reported-by: syzbot+825f0f9657d4e528046e@syzkaller.appspotmail.com
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 block/genhd.c |    9 ++++++---
 1 file changed, 6 insertions(+), 3 deletions(-)

--- a/block/genhd.c
+++ b/block/genhd.c
@@ -222,14 +222,17 @@ struct hd_struct *disk_part_iter_next(st
 		part = rcu_dereference(ptbl->part[piter->idx]);
 		if (!part)
 			continue;
+		get_device(part_to_dev(part));
+		piter->part = part;
 		if (!part_nr_sects_read(part) &&
 		    !(piter->flags & DISK_PITER_INCL_EMPTY) &&
 		    !(piter->flags & DISK_PITER_INCL_EMPTY_PART0 &&
-		      piter->idx == 0))
+		      piter->idx == 0)) {
+			put_device(part_to_dev(part));
+			piter->part = NULL;
 			continue;
+		}
 
-		get_device(part_to_dev(part));
-		piter->part = part;
 		piter->idx += inc;
 		break;
 	}

[PATCH 5.4 61/62] net: drop bogus skb with CHECKSUM_PARTIAL and offset beyond end of trimmed packet

[Greg Kroah-Hartman]

From: Vasily Averin <vvs@virtuozzo.com>

commit 54970a2fbb673f090b7f02d7f57b10b2e0707155 upstream.

syzbot reproduces BUG_ON in skb_checksum_help():
tun creates (bogus) skb with huge partial-checksummed area and
small ip packet inside. Then ip_rcv trims the skb based on size
of internal ip packet, after that csum offset points beyond of
trimmed skb. Then checksum_tg() called via netfilter hook
triggers BUG_ON:

        offset = skb_checksum_start_offset(skb);
        BUG_ON(offset >= skb_headlen(skb));

To work around the problem this patch forces pskb_trim_rcsum_slow()
to return -EINVAL in described scenario. It allows its callers to
drop such kind of packets.

Link: https://syzkaller.appspot.com/bug?id=b419a5ca95062664fe1a60b764621eb4526e2cd0
Reported-by: syzbot+7010af67ced6105e5ab6@syzkaller.appspotmail.com
Signed-off-by: Vasily Averin <vvs@virtuozzo.com>
Acked-by: Willem de Bruijn <willemb@google.com>
Link: https://lore.kernel.org/r/1b2494af-2c56-8ee2-7bc0-923fcad1cdf8@virtuozzo.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 net/core/skbuff.c |    6 ++++++
 1 file changed, 6 insertions(+)

--- a/net/core/skbuff.c
+++ b/net/core/skbuff.c
@@ -2017,6 +2017,12 @@ int pskb_trim_rcsum_slow(struct sk_buff
 		skb->csum = csum_block_sub(skb->csum,
 					   skb_checksum(skb, len, delta, 0),
 					   len);
+	} else if (skb->ip_summed == CHECKSUM_PARTIAL) {
+		int hdlen = (len > skb_headlen(skb)) ? skb_headlen(skb) : len;
+		int offset = skb_checksum_start_offset(skb) + skb->csum_offset;
+
+		if (offset + sizeof(__sum16) > hdlen)
+			return -EINVAL;
 	}
 	return __pskb_trim(skb, len);
 }

[PATCH 5.4 62/62] regmap: debugfs: Fix a reversed if statement in regmap_debugfs_init()

[Greg Kroah-Hartman]

From: Dan Carpenter <dan.carpenter@oracle.com>

commit f6bcb4c7f366905b66ce8ffca7190118244bb642 upstream.

This code will leak "map->debugfs_name" because the if statement is
reversed so it only frees NULL pointers instead of non-NULL.  In
fact the if statement is not required and should just be removed
because kfree() accepts NULL pointers.

Fixes: cffa4b2122f5 ("regmap: debugfs: Fix a memory leak when calling regmap_attach_dev")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Link: https://lore.kernel.org/r/X/RQpfAwRdLg0GqQ@mwanda
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/base/regmap/regmap-debugfs.c |    4 +---
 1 file changed, 1 insertion(+), 3 deletions(-)

--- a/drivers/base/regmap/regmap-debugfs.c
+++ b/drivers/base/regmap/regmap-debugfs.c
@@ -595,9 +595,7 @@ void regmap_debugfs_init(struct regmap *
 	}
 
 	if (!strcmp(name, "dummy")) {
-		if (!map->debugfs_name)
-			kfree(map->debugfs_name);
-
+		kfree(map->debugfs_name);
 		map->debugfs_name = kasprintf(GFP_KERNEL, "dummy%d",
 						dummy_index);
 		if (!map->debugfs_name)

Re: [PATCH 5.4 00/62] 5.4.90-rc1 review

[Jon Hunter]

On Fri, 15 Jan 2021 13:27:22 +0100, Greg Kroah-Hartman wrote:
> This is the start of the stable review cycle for the 5.4.90 release.
> There are 62 patches in this series, all will be posted as a response
> to this one.  If anyone has any issues with these being applied, please
> let me know.
> 
> Responses should be made by Sun, 17 Jan 2021 12:19:42 +0000.
> Anything received after that time might be too late.
> 
> The whole patch series can be found in one patch at:
> 	https://www.kernel.org/pub/linux/kernel/v5.x/stable-review/patch-5.4.90-rc1.gz
> or in the git tree and branch at:
> 	git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-5.4.y
> and the diffstat can be found below.
> 
> thanks,
> 
> greg k-h

All tests passing for Tegra ...

Test results for stable-v5.4:
    12 builds:	12 pass, 0 fail
    26 boots:	26 pass, 0 fail
    56 tests:	56 pass, 0 fail

Linux version:	5.4.90-rc1-gaddd8d79e8f6
Boards tested:	tegra124-jetson-tk1, tegra186-p2771-0000,
                tegra194-p2972-0000, tegra20-ventana,
                tegra210-p2371-2180, tegra210-p3450-0000,
                tegra30-cardhu-a04

Tested-by: Jon Hunter <jonathanh@nvidia.com>

Jon

Re: [PATCH 5.4 00/62] 5.4.90-rc1 review

[Shuah Khan]

On 1/15/21 5:27 AM, Greg Kroah-Hartman wrote:
> This is the start of the stable review cycle for the 5.4.90 release.
> There are 62 patches in this series, all will be posted as a response
> to this one.  If anyone has any issues with these being applied, please
> let me know.
> 
> Responses should be made by Sun, 17 Jan 2021 12:19:42 +0000.
> Anything received after that time might be too late.
> 
> The whole patch series can be found in one patch at:
> 	https://www.kernel.org/pub/linux/kernel/v5.x/stable-review/patch-5.4.90-rc1.gz
> or in the git tree and branch at:
> 	git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-5.4.y
> and the diffstat can be found below.
> 
> thanks,
> 
> greg k-h
> 

Compiled and booted on my test system. No dmesg regressions.

Tested-by: Shuah Khan <skhan@linuxfoundation.org>

thanks,
-- Shuah

Re: [PATCH 5.4 00/62] 5.4.90-rc1 review

[Guenter Roeck]

On Fri, Jan 15, 2021 at 01:27:22PM +0100, Greg Kroah-Hartman wrote:
> This is the start of the stable review cycle for the 5.4.90 release.
> There are 62 patches in this series, all will be posted as a response
> to this one.  If anyone has any issues with these being applied, please
> let me know.
> 
> Responses should be made by Sun, 17 Jan 2021 12:19:42 +0000.
> Anything received after that time might be too late.
> 

Build results:
	total: 157 pass: 157 fail: 0
Qemu test results:
	total: 427 pass: 427 fail: 0

Tested-by: Guenter Roeck <linux@roeck-us.net>

Guenter

Re: [PATCH 5.4 00/62] 5.4.90-rc1 review

[Naresh Kamboju]

On Fri, 15 Jan 2021 at 18:04, Greg Kroah-Hartman
<gregkh@linuxfoundation.org> wrote:
>
> This is the start of the stable review cycle for the 5.4.90 release.
> There are 62 patches in this series, all will be posted as a response
> to this one.  If anyone has any issues with these being applied, please
> let me know.
>
> Responses should be made by Sun, 17 Jan 2021 12:19:42 +0000.
> Anything received after that time might be too late.
>
> The whole patch series can be found in one patch at:
>         https://www.kernel.org/pub/linux/kernel/v5.x/stable-review/patch-5.4.90-rc1.gz
> or in the git tree and branch at:
>         git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-5.4.y
> and the diffstat can be found below.
>
> thanks,
>
> greg k-h

Results from Linaro’s test farm.
No regressions on arm64, arm, x86_64, and i386.

Tested-by: Linux Kernel Functional Testing <lkft@linaro.org>

Summary
------------------------------------------------------------------------

kernel: 5.4.90-rc1
git repo: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git
git branch: linux-5.4.y
git commit: addd8d79e8f6b991ed5ff59f0ad22a1170dcabd0
git describe: v5.4.89-63-gaddd8d79e8f6
Test details: https://qa-reports.linaro.org/lkft/linux-stable-rc-linux-5.4.y/build/v5.4.89-63-gaddd8d79e8f6

No regressions (compared to build v5.4.89)

No fixes (compared to build v5.4.89)

Ran 52491 total tests in the following environments and test suites.

Environments
--------------
- arc
- arm
- arm64
- dragonboard-410c
- hi6220-hikey
- i386
- juno-r2
- juno-r2-compat
- juno-r2-kasan
- mips
- nxp-ls2088
- parisc
- powerpc
- qemu-arm-clang
- qemu-arm64-clang
- qemu-arm64-kasan
- qemu-x86_64-clang
- qemu-x86_64-kasan
- qemu-x86_64-kcsan
- qemu_arm
- qemu_arm64
- qemu_arm64-compat
- qemu_i386
- qemu_x86_64
- qemu_x86_64-compat
- riscv
- s390
- sh
- sparc
- x15
- x86
- x86-kasan
- x86_64

Test Suites
-----------
* build
* linux-log-parser
* igt-gpu-tools
* install-android-platform-tools-r2600
* kselftest
* kvm-unit-tests
* libhugetlbfs
* ltp-commands-tests
* ltp-containers-tests
* ltp-cve-tests
* ltp-dio-tests
* ltp-fs-tests
* ltp-hugetlb-tests
* ltp-io-tests
* ltp-math-tests
* ltp-mm-tests
* ltp-nptl-tests
* ltp-pty-tests
* ltp-sched-tests
* ltp-securebits-tests
* ltp-syscalls-tests
* ltp-tracing-tests
* perf
* v4l2-compliance
* fwts
* ltp-cap_bounds-tests
* ltp-controllers-tests
* ltp-cpuhotplug-tests
* ltp-crypto-tests
* ltp-fcntl-locktests-tests
* ltp-filecaps-tests
* ltp-fs_bind-tests
* ltp-fs_perms_simple-tests
* ltp-fsx-tests
* ltp-ipc-tests
* network-basic-tests
* ltp-open-posix-tests
* rcutorture
* kselftest-vsyscall-mode-native
* kselftest-vsyscall-mode-none

-- 
Linaro LKFT
https://lkft.linaro.org