* [PATCH 0/3] Small fixes and improvements
@ 2021-01-18 16:01 Giuliano Procida
2021-01-18 16:01 ` [PATCH 1/3] btf_encoder: Fix handling of restrict qualifier Giuliano Procida
` (3 more replies)
0 siblings, 4 replies; 22+ messages in thread
From: Giuliano Procida @ 2021-01-18 16:01 UTC (permalink / raw)
To: dwarves
Cc: kernel-team, maennich, ast, andrii, bpf, kernel-team, Giuliano Procida
Hi.
1 is a bug fix affecting restrict qualifiers.
2 avoids leaving debris if objcopy fails.
3 aligns the BTF section to 16 bytes to avoid misaligned access.
Regards.
Giuliano Procida (3):
btf_encoder: Fix handling of restrict qualifier
btf_encoder: Improve error-handling around objcopy
btf_encoder: Set .BTF section alignment to 16
libbtf.c | 17 +++++++++++++----
1 file changed, 13 insertions(+), 4 deletions(-)
--
2.30.0.284.gd98b1dd5eaa7-goog
^ permalink raw reply [flat|nested] 22+ messages in thread* [PATCH 1/3] btf_encoder: Fix handling of restrict qualifier 2021-01-18 16:01 [PATCH 0/3] Small fixes and improvements Giuliano Procida @ 2021-01-18 16:01 ` Giuliano Procida 2021-01-21 7:07 ` Andrii Nakryiko 2021-01-18 16:01 ` [PATCH 2/3] btf_encoder: Improve error-handling around objcopy Giuliano Procida ` (2 subsequent siblings) 3 siblings, 1 reply; 22+ messages in thread From: Giuliano Procida @ 2021-01-18 16:01 UTC (permalink / raw) To: dwarves Cc: kernel-team, maennich, ast, andrii, bpf, kernel-team, Giuliano Procida Fixes: 48efa92933e8 ("btf_encoder: Use libbpf APIs to encode BTF type info") Signed-off-by: Giuliano Procida <gprocida@google.com> --- libbtf.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/libbtf.c b/libbtf.c index 16e1d45..3709087 100644 --- a/libbtf.c +++ b/libbtf.c @@ -417,7 +417,7 @@ int32_t btf_elf__add_ref_type(struct btf_elf *btfe, uint16_t kind, uint32_t type id = btf__add_const(btf, type); break; case BTF_KIND_RESTRICT: - id = btf__add_const(btf, type); + id = btf__add_restrict(btf, type); break; case BTF_KIND_TYPEDEF: id = btf__add_typedef(btf, name, type); -- 2.30.0.284.gd98b1dd5eaa7-goog ^ permalink raw reply related [flat|nested] 22+ messages in thread
* Re: [PATCH 1/3] btf_encoder: Fix handling of restrict qualifier 2021-01-18 16:01 ` [PATCH 1/3] btf_encoder: Fix handling of restrict qualifier Giuliano Procida @ 2021-01-21 7:07 ` Andrii Nakryiko 2021-01-21 13:04 ` Arnaldo Carvalho de Melo 0 siblings, 1 reply; 22+ messages in thread From: Andrii Nakryiko @ 2021-01-21 7:07 UTC (permalink / raw) To: Giuliano Procida Cc: dwarves, kernel-team, maennich, Alexei Starovoitov, Andrii Nakryiko, bpf, Kernel Team On Mon, Jan 18, 2021 at 8:01 AM Giuliano Procida <gprocida@google.com> wrote: > > Fixes: 48efa92933e8 ("btf_encoder: Use libbpf APIs to encode BTF type info") > > Signed-off-by: Giuliano Procida <gprocida@google.com> > --- It's up to the maintainer, but some short commit message would be welcome. Also, it would be nice to have [PATCH dwarves] to distinguish this from patches targeted to bpf/bpf-next tree. The fix itself looks good: Acked-by: Andrii Nakryiko <andrii@kernel.org> > libbtf.c | 2 +- > 1 file changed, 1 insertion(+), 1 deletion(-) > > diff --git a/libbtf.c b/libbtf.c > index 16e1d45..3709087 100644 > --- a/libbtf.c > +++ b/libbtf.c > @@ -417,7 +417,7 @@ int32_t btf_elf__add_ref_type(struct btf_elf *btfe, uint16_t kind, uint32_t type > id = btf__add_const(btf, type); > break; > case BTF_KIND_RESTRICT: > - id = btf__add_const(btf, type); > + id = btf__add_restrict(btf, type); > break; > case BTF_KIND_TYPEDEF: > id = btf__add_typedef(btf, name, type); > -- > 2.30.0.284.gd98b1dd5eaa7-goog > ^ permalink raw reply [flat|nested] 22+ messages in thread
* Re: [PATCH 1/3] btf_encoder: Fix handling of restrict qualifier 2021-01-21 7:07 ` Andrii Nakryiko @ 2021-01-21 13:04 ` Arnaldo Carvalho de Melo 0 siblings, 0 replies; 22+ messages in thread From: Arnaldo Carvalho de Melo @ 2021-01-21 13:04 UTC (permalink / raw) To: Giuliano Procida, Andrii Nakryiko Cc: dwarves, kernel-team, maennich, Alexei Starovoitov, bpf, Kernel Team, Andrii Nakryiko Em Wed, Jan 20, 2021 at 11:07:44PM -0800, Andrii Nakryiko escreveu: > On Mon, Jan 18, 2021 at 8:01 AM Giuliano Procida <gprocida@google.com> wrote: > > > > Fixes: 48efa92933e8 ("btf_encoder: Use libbpf APIs to encode BTF type info") > > > > Signed-off-by: Giuliano Procida <gprocida@google.com> > > --- > > It's up to the maintainer, but some short commit message would be > welcome. Also, it would be nice to have [PATCH dwarves] to distinguish > this from patches targeted to bpf/bpf-next tree. Yeah, this one looks obvious so I'll add the comment myself, please do it next time. - Arnaldo > The fix itself looks good: > > Acked-by: Andrii Nakryiko <andrii@kernel.org> > > > libbtf.c | 2 +- > > 1 file changed, 1 insertion(+), 1 deletion(-) > > > > diff --git a/libbtf.c b/libbtf.c > > index 16e1d45..3709087 100644 > > --- a/libbtf.c > > +++ b/libbtf.c > > @@ -417,7 +417,7 @@ int32_t btf_elf__add_ref_type(struct btf_elf *btfe, uint16_t kind, uint32_t type > > id = btf__add_const(btf, type); > > break; > > case BTF_KIND_RESTRICT: > > - id = btf__add_const(btf, type); > > + id = btf__add_restrict(btf, type); > > break; > > case BTF_KIND_TYPEDEF: > > id = btf__add_typedef(btf, name, type); > > -- > > 2.30.0.284.gd98b1dd5eaa7-goog > > -- - Arnaldo ^ permalink raw reply [flat|nested] 22+ messages in thread
* [PATCH 2/3] btf_encoder: Improve error-handling around objcopy 2021-01-18 16:01 [PATCH 0/3] Small fixes and improvements Giuliano Procida 2021-01-18 16:01 ` [PATCH 1/3] btf_encoder: Fix handling of restrict qualifier Giuliano Procida @ 2021-01-18 16:01 ` Giuliano Procida 2021-01-21 7:09 ` Andrii Nakryiko 2021-01-18 16:01 ` [PATCH 3/3] btf_encoder: Set .BTF section alignment to 16 Giuliano Procida 2021-01-21 11:35 ` [PATCH dwarves v2 0/3] Small fixes and improvements Giuliano Procida 3 siblings, 1 reply; 22+ messages in thread From: Giuliano Procida @ 2021-01-18 16:01 UTC (permalink / raw) To: dwarves Cc: kernel-team, maennich, ast, andrii, bpf, kernel-team, Giuliano Procida * Report the correct filename when objcopy fails. * Unlink the temporary file on error. Signed-off-by: Giuliano Procida <gprocida@google.com> --- libbtf.c | 7 ++++--- 1 file changed, 4 insertions(+), 3 deletions(-) diff --git a/libbtf.c b/libbtf.c index 3709087..7552d8e 100644 --- a/libbtf.c +++ b/libbtf.c @@ -786,18 +786,19 @@ static int btf_elf__write(const char *filename, struct btf *btf) if (write(fd, raw_btf_data, raw_btf_size) != raw_btf_size) { fprintf(stderr, "%s: write of %d bytes to '%s' failed: %d!\n", __func__, raw_btf_size, tmp_fn, errno); - goto out; + goto unlink; } snprintf(cmd, sizeof(cmd), "%s --add-section .BTF=%s %s", llvm_objcopy, tmp_fn, filename); if (system(cmd)) { fprintf(stderr, "%s: failed to add .BTF section to '%s': %d!\n", - __func__, tmp_fn, errno); - goto out; + __func__, filename, errno); + goto unlink; } err = 0; + unlink: unlink(tmp_fn); } -- 2.30.0.284.gd98b1dd5eaa7-goog ^ permalink raw reply related [flat|nested] 22+ messages in thread
* Re: [PATCH 2/3] btf_encoder: Improve error-handling around objcopy 2021-01-18 16:01 ` [PATCH 2/3] btf_encoder: Improve error-handling around objcopy Giuliano Procida @ 2021-01-21 7:09 ` Andrii Nakryiko 0 siblings, 0 replies; 22+ messages in thread From: Andrii Nakryiko @ 2021-01-21 7:09 UTC (permalink / raw) To: Giuliano Procida Cc: dwarves, kernel-team, maennich, Alexei Starovoitov, Andrii Nakryiko, bpf, Kernel Team On Mon, Jan 18, 2021 at 8:01 AM Giuliano Procida <gprocida@google.com> wrote: > > * Report the correct filename when objcopy fails. > * Unlink the temporary file on error. > > Signed-off-by: Giuliano Procida <gprocida@google.com> > --- Acked-by: Andrii Nakryiko <andrii@kernel.org> > libbtf.c | 7 ++++--- > 1 file changed, 4 insertions(+), 3 deletions(-) > > diff --git a/libbtf.c b/libbtf.c > index 3709087..7552d8e 100644 > --- a/libbtf.c > +++ b/libbtf.c > @@ -786,18 +786,19 @@ static int btf_elf__write(const char *filename, struct btf *btf) > if (write(fd, raw_btf_data, raw_btf_size) != raw_btf_size) { > fprintf(stderr, "%s: write of %d bytes to '%s' failed: %d!\n", > __func__, raw_btf_size, tmp_fn, errno); > - goto out; > + goto unlink; > } > > snprintf(cmd, sizeof(cmd), "%s --add-section .BTF=%s %s", > llvm_objcopy, tmp_fn, filename); > if (system(cmd)) { > fprintf(stderr, "%s: failed to add .BTF section to '%s': %d!\n", > - __func__, tmp_fn, errno); > - goto out; > + __func__, filename, errno); > + goto unlink; > } > > err = 0; > + unlink: > unlink(tmp_fn); > } > > -- > 2.30.0.284.gd98b1dd5eaa7-goog > ^ permalink raw reply [flat|nested] 22+ messages in thread
* [PATCH 3/3] btf_encoder: Set .BTF section alignment to 16 2021-01-18 16:01 [PATCH 0/3] Small fixes and improvements Giuliano Procida 2021-01-18 16:01 ` [PATCH 1/3] btf_encoder: Fix handling of restrict qualifier Giuliano Procida 2021-01-18 16:01 ` [PATCH 2/3] btf_encoder: Improve error-handling around objcopy Giuliano Procida @ 2021-01-18 16:01 ` Giuliano Procida 2021-01-21 7:16 ` Andrii Nakryiko 2021-01-21 11:35 ` [PATCH dwarves v2 0/3] Small fixes and improvements Giuliano Procida 3 siblings, 1 reply; 22+ messages in thread From: Giuliano Procida @ 2021-01-18 16:01 UTC (permalink / raw) To: dwarves Cc: kernel-team, maennich, ast, andrii, bpf, kernel-team, Giuliano Procida This is to avoid misaligned access when memory-mapping ELF sections. Signed-off-by: Giuliano Procida <gprocida@google.com> --- libbtf.c | 8 ++++++++ 1 file changed, 8 insertions(+) diff --git a/libbtf.c b/libbtf.c index 7552d8e..2f12d53 100644 --- a/libbtf.c +++ b/libbtf.c @@ -797,6 +797,14 @@ static int btf_elf__write(const char *filename, struct btf *btf) goto unlink; } + snprintf(cmd, sizeof(cmd), "%s --set-section-alignment .BTF=16 %s", + llvm_objcopy, filename); + if (system(cmd)) { + /* non-fatal, this is a nice-to-have and it's only supported from LLVM 10 */ + fprintf(stderr, "%s: warning: failed to align .BTF section in '%s': %d!\n", + __func__, filename, errno); + } + err = 0; unlink: unlink(tmp_fn); -- 2.30.0.284.gd98b1dd5eaa7-goog ^ permalink raw reply related [flat|nested] 22+ messages in thread
* Re: [PATCH 3/3] btf_encoder: Set .BTF section alignment to 16 2021-01-18 16:01 ` [PATCH 3/3] btf_encoder: Set .BTF section alignment to 16 Giuliano Procida @ 2021-01-21 7:16 ` Andrii Nakryiko [not found] ` <CAGvU0HmE+gs8eNQcXmFrEERHaiGEnMgqxBho4Ny3DLCe6WR55Q@mail.gmail.com> 0 siblings, 1 reply; 22+ messages in thread From: Andrii Nakryiko @ 2021-01-21 7:16 UTC (permalink / raw) To: Giuliano Procida Cc: dwarves, kernel-team, maennich, Alexei Starovoitov, Andrii Nakryiko, bpf, Kernel Team On Mon, Jan 18, 2021 at 8:01 AM Giuliano Procida <gprocida@google.com> wrote: > > This is to avoid misaligned access when memory-mapping ELF sections. > > Signed-off-by: Giuliano Procida <gprocida@google.com> > --- > libbtf.c | 8 ++++++++ > 1 file changed, 8 insertions(+) > > diff --git a/libbtf.c b/libbtf.c > index 7552d8e..2f12d53 100644 > --- a/libbtf.c > +++ b/libbtf.c > @@ -797,6 +797,14 @@ static int btf_elf__write(const char *filename, struct btf *btf) > goto unlink; > } > > + snprintf(cmd, sizeof(cmd), "%s --set-section-alignment .BTF=16 %s", > + llvm_objcopy, filename); does it align inside the ELF file to 16 bytes, or does it request the linker to align it at 16 byte alignment in memory? Given .BTF section is not loadable, trying to understand the implications. > + if (system(cmd)) { Also curious, if objcopy emits error (saying that --set-section-alignment argument is not recognized), will that error be shown in stdout? or system() consumes it without redirecting it to stdout? > + /* non-fatal, this is a nice-to-have and it's only supported from LLVM 10 */ > + fprintf(stderr, "%s: warning: failed to align .BTF section in '%s': %d!\n", > + __func__, filename, errno); Probably better to emit this warning only in verbose mode, otherwise lots of people will start complaining that they get some new warnings from pahole. > + } > + > err = 0; > unlink: > unlink(tmp_fn); > -- > 2.30.0.284.gd98b1dd5eaa7-goog > ^ permalink raw reply [flat|nested] 22+ messages in thread
[parent not found: <CAGvU0HmE+gs8eNQcXmFrEERHaiGEnMgqxBho4Ny3DLCe6WR55Q@mail.gmail.com>]
* Re: [PATCH 3/3] btf_encoder: Set .BTF section alignment to 16 [not found] ` <CAGvU0HmE+gs8eNQcXmFrEERHaiGEnMgqxBho4Ny3DLCe6WR55Q@mail.gmail.com> @ 2021-01-21 20:07 ` Andrii Nakryiko 2021-01-25 12:53 ` Giuliano Procida 2021-01-27 15:08 ` Giuliano Procida 0 siblings, 2 replies; 22+ messages in thread From: Andrii Nakryiko @ 2021-01-21 20:07 UTC (permalink / raw) To: Giuliano Procida Cc: dwarves, kernel-team, Matthias Männich, Alexei Starovoitov, Andrii Nakryiko, bpf, Kernel Team On Thu, Jan 21, 2021 at 3:07 AM Giuliano Procida <gprocida@google.com> wrote: > > Hi. > > On Thu, 21 Jan 2021 at 07:16, Andrii Nakryiko <andrii.nakryiko@gmail.com> wrote: >> >> On Mon, Jan 18, 2021 at 8:01 AM Giuliano Procida <gprocida@google.com> wrote: >> > >> > This is to avoid misaligned access when memory-mapping ELF sections. >> > >> > Signed-off-by: Giuliano Procida <gprocida@google.com> >> > --- >> > libbtf.c | 8 ++++++++ >> > 1 file changed, 8 insertions(+) >> > >> > diff --git a/libbtf.c b/libbtf.c >> > index 7552d8e..2f12d53 100644 >> > --- a/libbtf.c >> > +++ b/libbtf.c >> > @@ -797,6 +797,14 @@ static int btf_elf__write(const char *filename, struct btf *btf) >> > goto unlink; >> > } >> > >> > + snprintf(cmd, sizeof(cmd), "%s --set-section-alignment .BTF=16 %s", >> > + llvm_objcopy, filename); >> >> does it align inside the ELF file to 16 bytes, or does it request the >> linker to align it at 16 byte alignment in memory? Given .BTF section >> is not loadable, trying to understand the implications. >> > > We have a tool that loads BTF from ELF files. It uses mmap and "parses" the BTF as structs in memory. The ELF file is mapped with page alignment but the BTF section within it has no alignment at all. Using MSAN (IIRC) we get warnings about misaligned accesses. Everything within BTF itself is naturally aligned, so it makes sense to align the section within ELF as well. There are probably some architectures where this makes the difference between working and SIGBUS. > Right, ok, thanks for explaining! > I did try to get objcopy to set alignment at the point the section is added. However, this didn't work. > >> >> >> > + if (system(cmd)) { >> >> Also curious, if objcopy emits error (saying that >> --set-section-alignment argument is not recognized), will that error >> be shown in stdout? or system() consumes it without redirecting it to >> stdout? >> > > I believe it goes to stderr. I would need to check. system() will not consume this. I'm not keen to write stderr (or stdout) post-processing code in plain C. > You can use popen() to capture/hide output, this is a better alternative to system() in this case. We don't want "expected warnings" in kernel build process. >> >> > + /* non-fatal, this is a nice-to-have and it's only supported from LLVM 10 */ >> > + fprintf(stderr, "%s: warning: failed to align .BTF section in '%s': %d!\n", >> > + __func__, filename, errno); >> >> Probably better to emit this warning only in verbose mode, otherwise >> lots of people will start complaining that they get some new warnings >> from pahole. >> > > It may be better to just use POSIX and ELF APIs directly instead of objcopy. This way the section can be added with the right alignment directly. pahole is already linked against libelf and if we could get rid of the external dependency on objcopy it would be a win in more than one way. This would be great, yes. At some point I remember giving it a try, but for some reason I couldn't make libelf flush data and update section headers properly. Maybe you'll have better luck. Though I think I was trying to mark section loadable, and eventually I probably managed to do that, but still abandoned it (it's not enough to mark section loadable, you have to assign it to ELF segment as well, which libelf doesn't allow to do and you need linker support). Anyways, give it a try, it should work. > >> >> >> > + } >> > + >> > err = 0; >> > unlink: >> > unlink(tmp_fn); >> > -- >> > 2.30.0.284.gd98b1dd5eaa7-goog >> > > > > I'll see if I can spend a little time on this idea instead. > > Regards, > Giuliano. ^ permalink raw reply [flat|nested] 22+ messages in thread
* Re: [PATCH 3/3] btf_encoder: Set .BTF section alignment to 16 2021-01-21 20:07 ` Andrii Nakryiko @ 2021-01-25 12:53 ` Giuliano Procida 2021-01-26 0:28 ` Andrii Nakryiko 2021-01-27 15:08 ` Giuliano Procida 1 sibling, 1 reply; 22+ messages in thread From: Giuliano Procida @ 2021-01-25 12:53 UTC (permalink / raw) To: Andrii Nakryiko Cc: dwarves, kernel-team, Matthias Männich, Alexei Starovoitov, Andrii Nakryiko, bpf, Kernel Team Hi. On Thu, 21 Jan 2021 at 20:08, Andrii Nakryiko <andrii.nakryiko@gmail.com> wrote: > > On Thu, Jan 21, 2021 at 3:07 AM Giuliano Procida <gprocida@google.com> wrote: > > > > Hi. > > > > On Thu, 21 Jan 2021 at 07:16, Andrii Nakryiko <andrii.nakryiko@gmail.com> wrote: > >> > >> On Mon, Jan 18, 2021 at 8:01 AM Giuliano Procida <gprocida@google.com> wrote: > >> > > >> > This is to avoid misaligned access when memory-mapping ELF sections. > >> > > >> > Signed-off-by: Giuliano Procida <gprocida@google.com> > >> > --- > >> > libbtf.c | 8 ++++++++ > >> > 1 file changed, 8 insertions(+) > >> > > >> > diff --git a/libbtf.c b/libbtf.c > >> > index 7552d8e..2f12d53 100644 > >> > --- a/libbtf.c > >> > +++ b/libbtf.c > >> > @@ -797,6 +797,14 @@ static int btf_elf__write(const char *filename, struct btf *btf) > >> > goto unlink; > >> > } > >> > > >> > + snprintf(cmd, sizeof(cmd), "%s --set-section-alignment .BTF=16 %s", > >> > + llvm_objcopy, filename); > >> > >> does it align inside the ELF file to 16 bytes, or does it request the > >> linker to align it at 16 byte alignment in memory? Given .BTF section > >> is not loadable, trying to understand the implications. > >> > > > > We have a tool that loads BTF from ELF files. It uses mmap and "parses" the BTF as structs in memory. The ELF file is mapped with page alignment but the BTF section within it has no alignment at all. Using MSAN (IIRC) we get warnings about misaligned accesses. Everything within BTF itself is naturally aligned, so it makes sense to align the section within ELF as well. There are probably some architectures where this makes the difference between working and SIGBUS. > > > > Right, ok, thanks for explaining! > > > I did try to get objcopy to set alignment at the point the section is added. However, this didn't work. > > > >> > >> > >> > + if (system(cmd)) { > >> > >> Also curious, if objcopy emits error (saying that > >> --set-section-alignment argument is not recognized), will that error > >> be shown in stdout? or system() consumes it without redirecting it to > >> stdout? > >> > > > > I believe it goes to stderr. I would need to check. system() will not consume this. I'm not keen to write stderr (or stdout) post-processing code in plain C. > > > > You can use popen() to capture/hide output, this is a better > alternative to system() in this case. We don't want "expected > warnings" in kernel build process. > > >> > >> > + /* non-fatal, this is a nice-to-have and it's only supported from LLVM 10 */ > >> > + fprintf(stderr, "%s: warning: failed to align .BTF section in '%s': %d!\n", > >> > + __func__, filename, errno); > >> > >> Probably better to emit this warning only in verbose mode, otherwise > >> lots of people will start complaining that they get some new warnings > >> from pahole. > >> > > > > It may be better to just use POSIX and ELF APIs directly instead of objcopy. This way the section can be added with the right alignment directly. pahole is already linked against libelf and if we could get rid of the external dependency on objcopy it would be a win in more than one way. > > This would be great, yes. At some point I remember giving it a try, > but for some reason I couldn't make libelf flush data and update > section headers properly. Maybe you'll have better luck. Though I > think I was trying to mark section loadable, and eventually I probably > managed to do that, but still abandoned it (it's not enough to mark > section loadable, you have to assign it to ELF segment as well, which > libelf doesn't allow to do and you need linker support). Anyways, give > it a try, it should work. I struggled for a day and a bit and have got this (ELF_F_LAYOUT etc.) working. There are some caveats: 1. Laying out only the new / updated sections can leave gaps. In practice, for vmlinux, it's a very small hole. To fix this, I'd need to reposition .strtab as well as .BTF and .shstrtab. 2. vmlinux increases in size as llvm-objcopy was trimming down .strtab. I know very little about this, but I'd guess that the kernel linker scripts are leaving strings in .strtab that are not referenced by .symtab. I'll send a short series out for review soon. Giuliano. > > > > >> > >> > >> > + } > >> > + > >> > err = 0; > >> > unlink: > >> > unlink(tmp_fn); > >> > -- > >> > 2.30.0.284.gd98b1dd5eaa7-goog > >> > > > > > > > I'll see if I can spend a little time on this idea instead. > > > > Regards, > > Giuliano. > > -- > To unsubscribe from this group and stop receiving emails from it, send an email to kernel-team+unsubscribe@android.com. > ^ permalink raw reply [flat|nested] 22+ messages in thread
* Re: [PATCH 3/3] btf_encoder: Set .BTF section alignment to 16 2021-01-25 12:53 ` Giuliano Procida @ 2021-01-26 0:28 ` Andrii Nakryiko 2021-01-26 11:43 ` Giuliano Procida 0 siblings, 1 reply; 22+ messages in thread From: Andrii Nakryiko @ 2021-01-26 0:28 UTC (permalink / raw) To: Giuliano Procida Cc: dwarves, kernel-team, Matthias Männich, Alexei Starovoitov, Andrii Nakryiko, bpf, Kernel Team On Mon, Jan 25, 2021 at 4:53 AM Giuliano Procida <gprocida@google.com> wrote: > > Hi. > > On Thu, 21 Jan 2021 at 20:08, Andrii Nakryiko <andrii.nakryiko@gmail.com> wrote: > > > > On Thu, Jan 21, 2021 at 3:07 AM Giuliano Procida <gprocida@google.com> wrote: > > > > > > Hi. > > > > > > On Thu, 21 Jan 2021 at 07:16, Andrii Nakryiko <andrii.nakryiko@gmail.com> wrote: > > >> > > >> On Mon, Jan 18, 2021 at 8:01 AM Giuliano Procida <gprocida@google.com> wrote: > > >> > > > >> > This is to avoid misaligned access when memory-mapping ELF sections. > > >> > > > >> > Signed-off-by: Giuliano Procida <gprocida@google.com> > > >> > --- > > >> > libbtf.c | 8 ++++++++ > > >> > 1 file changed, 8 insertions(+) > > >> > > > >> > diff --git a/libbtf.c b/libbtf.c > > >> > index 7552d8e..2f12d53 100644 > > >> > --- a/libbtf.c > > >> > +++ b/libbtf.c > > >> > @@ -797,6 +797,14 @@ static int btf_elf__write(const char *filename, struct btf *btf) > > >> > goto unlink; > > >> > } > > >> > > > >> > + snprintf(cmd, sizeof(cmd), "%s --set-section-alignment .BTF=16 %s", > > >> > + llvm_objcopy, filename); > > >> > > >> does it align inside the ELF file to 16 bytes, or does it request the > > >> linker to align it at 16 byte alignment in memory? Given .BTF section > > >> is not loadable, trying to understand the implications. > > >> > > > > > > We have a tool that loads BTF from ELF files. It uses mmap and "parses" the BTF as structs in memory. The ELF file is mapped with page alignment but the BTF section within it has no alignment at all. Using MSAN (IIRC) we get warnings about misaligned accesses. Everything within BTF itself is naturally aligned, so it makes sense to align the section within ELF as well. There are probably some architectures where this makes the difference between working and SIGBUS. > > > > > > > Right, ok, thanks for explaining! > > > > > I did try to get objcopy to set alignment at the point the section is added. However, this didn't work. > > > > > >> > > >> > > >> > + if (system(cmd)) { > > >> > > >> Also curious, if objcopy emits error (saying that > > >> --set-section-alignment argument is not recognized), will that error > > >> be shown in stdout? or system() consumes it without redirecting it to > > >> stdout? > > >> > > > > > > I believe it goes to stderr. I would need to check. system() will not consume this. I'm not keen to write stderr (or stdout) post-processing code in plain C. > > > > > > > You can use popen() to capture/hide output, this is a better > > alternative to system() in this case. We don't want "expected > > warnings" in kernel build process. > > > > >> > > >> > + /* non-fatal, this is a nice-to-have and it's only supported from LLVM 10 */ > > >> > + fprintf(stderr, "%s: warning: failed to align .BTF section in '%s': %d!\n", > > >> > + __func__, filename, errno); > > >> > > >> Probably better to emit this warning only in verbose mode, otherwise > > >> lots of people will start complaining that they get some new warnings > > >> from pahole. > > >> > > > > > > It may be better to just use POSIX and ELF APIs directly instead of objcopy. This way the section can be added with the right alignment directly. pahole is already linked against libelf and if we could get rid of the external dependency on objcopy it would be a win in more than one way. > > > > This would be great, yes. At some point I remember giving it a try, > > but for some reason I couldn't make libelf flush data and update > > section headers properly. Maybe you'll have better luck. Though I > > think I was trying to mark section loadable, and eventually I probably > > managed to do that, but still abandoned it (it's not enough to mark > > section loadable, you have to assign it to ELF segment as well, which > > libelf doesn't allow to do and you need linker support). Anyways, give > > it a try, it should work. > > I struggled for a day and a bit and have got this (ELF_F_LAYOUT etc.) > working. There are some caveats: > > 1. Laying out only the new / updated sections can leave gaps. > > In practice, for vmlinux, it's a very small hole. To fix this, I'd > need to reposition .strtab as well as .BTF and .shstrtab. > > 2. vmlinux increases in size as llvm-objcopy was trimming down .strtab. > > I know very little about this, but I'd guess that the kernel linker > scripts are leaving strings in .strtab that are not referenced by > .symtab. > > I'll send a short series out for review soon. 1. Hm.. I realized I don't get why you need 16-byte alignment. Can you comment on why 8 doesn't work? 2. If you care about vmlinux BTF only, I think an easier way to ensure proper alignment is to adjust include/asm-generic/vmlinux.lds.h and add `. = ALIGN(8);` before .BTF (see how we ensure 4-byte alignment for .BTF_ids) If you have code ready to get rid of llvm-objcopy requirement for pahole, please still post, but we'll need to test it very thoroughly to ensure there are no regressions before landing in pahole. > > Giuliano. > > > > > > > > >> > > >> > > >> > + } > > >> > + > > >> > err = 0; > > >> > unlink: > > >> > unlink(tmp_fn); > > >> > -- > > >> > 2.30.0.284.gd98b1dd5eaa7-goog > > >> > > > > > > > > > > I'll see if I can spend a little time on this idea instead. > > > > > > Regards, > > > Giuliano. > > > > -- > > To unsubscribe from this group and stop receiving emails from it, send an email to kernel-team+unsubscribe@android.com. > > ^ permalink raw reply [flat|nested] 22+ messages in thread
* Re: [PATCH 3/3] btf_encoder: Set .BTF section alignment to 16 2021-01-26 0:28 ` Andrii Nakryiko @ 2021-01-26 11:43 ` Giuliano Procida 0 siblings, 0 replies; 22+ messages in thread From: Giuliano Procida @ 2021-01-26 11:43 UTC (permalink / raw) To: Andrii Nakryiko Cc: dwarves, kernel-team, Matthias Männich, Alexei Starovoitov, Andrii Nakryiko, bpf, Kernel Team Hi. On Tue, 26 Jan 2021 at 00:28, Andrii Nakryiko <andrii.nakryiko@gmail.com> wrote: > > On Mon, Jan 25, 2021 at 4:53 AM Giuliano Procida <gprocida@google.com> wrote: > > > > Hi. > > > > On Thu, 21 Jan 2021 at 20:08, Andrii Nakryiko <andrii.nakryiko@gmail.com> wrote: > > > > > > On Thu, Jan 21, 2021 at 3:07 AM Giuliano Procida <gprocida@google.com> wrote: > > > > > > > > Hi. > > > > > > > > On Thu, 21 Jan 2021 at 07:16, Andrii Nakryiko <andrii.nakryiko@gmail.com> wrote: > > > >> > > > >> On Mon, Jan 18, 2021 at 8:01 AM Giuliano Procida <gprocida@google.com> wrote: > > > >> > > > > >> > This is to avoid misaligned access when memory-mapping ELF sections. > > > >> > > > > >> > Signed-off-by: Giuliano Procida <gprocida@google.com> > > > >> > --- > > > >> > libbtf.c | 8 ++++++++ > > > >> > 1 file changed, 8 insertions(+) > > > >> > > > > >> > diff --git a/libbtf.c b/libbtf.c > > > >> > index 7552d8e..2f12d53 100644 > > > >> > --- a/libbtf.c > > > >> > +++ b/libbtf.c > > > >> > @@ -797,6 +797,14 @@ static int btf_elf__write(const char *filename, struct btf *btf) > > > >> > goto unlink; > > > >> > } > > > >> > > > > >> > + snprintf(cmd, sizeof(cmd), "%s --set-section-alignment .BTF=16 %s", > > > >> > + llvm_objcopy, filename); > > > >> > > > >> does it align inside the ELF file to 16 bytes, or does it request the > > > >> linker to align it at 16 byte alignment in memory? Given .BTF section > > > >> is not loadable, trying to understand the implications. > > > >> > > > > > > > > We have a tool that loads BTF from ELF files. It uses mmap and "parses" the BTF as structs in memory. The ELF file is mapped with page alignment but the BTF section within it has no alignment at all. Using MSAN (IIRC) we get warnings about misaligned accesses. Everything within BTF itself is naturally aligned, so it makes sense to align the section within ELF as well. There are probably some architectures where this makes the difference between working and SIGBUS. > > > > > > > > > > Right, ok, thanks for explaining! > > > > > > > I did try to get objcopy to set alignment at the point the section is added. However, this didn't work. > > > > > > > >> > > > >> > > > >> > + if (system(cmd)) { > > > >> > > > >> Also curious, if objcopy emits error (saying that > > > >> --set-section-alignment argument is not recognized), will that error > > > >> be shown in stdout? or system() consumes it without redirecting it to > > > >> stdout? > > > >> > > > > > > > > I believe it goes to stderr. I would need to check. system() will not consume this. I'm not keen to write stderr (or stdout) post-processing code in plain C. > > > > > > > > > > You can use popen() to capture/hide output, this is a better > > > alternative to system() in this case. We don't want "expected > > > warnings" in kernel build process. > > > > > > >> > > > >> > + /* non-fatal, this is a nice-to-have and it's only supported from LLVM 10 */ > > > >> > + fprintf(stderr, "%s: warning: failed to align .BTF section in '%s': %d!\n", > > > >> > + __func__, filename, errno); > > > >> > > > >> Probably better to emit this warning only in verbose mode, otherwise > > > >> lots of people will start complaining that they get some new warnings > > > >> from pahole. > > > >> > > > > > > > > It may be better to just use POSIX and ELF APIs directly instead of objcopy. This way the section can be added with the right alignment directly. pahole is already linked against libelf and if we could get rid of the external dependency on objcopy it would be a win in more than one way. > > > > > > This would be great, yes. At some point I remember giving it a try, > > > but for some reason I couldn't make libelf flush data and update > > > section headers properly. Maybe you'll have better luck. Though I > > > think I was trying to mark section loadable, and eventually I probably > > > managed to do that, but still abandoned it (it's not enough to mark > > > section loadable, you have to assign it to ELF segment as well, which > > > libelf doesn't allow to do and you need linker support). Anyways, give > > > it a try, it should work. > > > > I struggled for a day and a bit and have got this (ELF_F_LAYOUT etc.) > > working. There are some caveats: > > > > 1. Laying out only the new / updated sections can leave gaps. > > > > In practice, for vmlinux, it's a very small hole. To fix this, I'd > > need to reposition .strtab as well as .BTF and .shstrtab. > > > > 2. vmlinux increases in size as llvm-objcopy was trimming down .strtab. > > > > I know very little about this, but I'd guess that the kernel linker > > scripts are leaving strings in .strtab that are not referenced by > > .symtab. > > > > I'll send a short series out for review soon. > > 1. Hm.. I realized I don't get why you need 16-byte alignment. Can you > comment on why 8 doesn't work? > Sorry, 16 was a number that was guaranteed to work. However, after looking in more detail, 8 seems fine too. > 2. If you care about vmlinux BTF only, I think an easier way to ensure > proper alignment is to adjust include/asm-generic/vmlinux.lds.h and > add `. = ALIGN(8);` before .BTF (see how we ensure 4-byte alignment > for .BTF_ids) > Firstly, while we do care mostly about vmlinux, we also care about modules and even potentially plain userspace .o and .so files. In terms of testing and development, working with simple objects is simpler and faster. Does the above mean vmlinux will always contain an empty .BTF, ready to be populated? If not, we and others may add .BTF with pahole -J and that's the code I've been working on. > If you have code ready to get rid of llvm-objcopy requirement for > pahole, please still post, but we'll need to test it very thoroughly > to ensure there are no regressions before landing in pahole. It's stuck in a vger/kernel.org queue somewhere. The updated vmlinux my code generates is I believe much closer to the original vmlinux than what the existing code produces using llvm-objcopy. But that's not necessarily a good thing. Regards. > > > > > Giuliano. > > > > > > > > > > > > >> > > > >> > > > >> > + } > > > >> > + > > > >> > err = 0; > > > >> > unlink: > > > >> > unlink(tmp_fn); > > > >> > -- > > > >> > 2.30.0.284.gd98b1dd5eaa7-goog > > > >> > > > > > > > > > > > > > I'll see if I can spend a little time on this idea instead. > > > > > > > > Regards, > > > > Giuliano. > > > > > > -- > > > To unsubscribe from this group and stop receiving emails from it, send an email to kernel-team+unsubscribe@android.com. > > > ^ permalink raw reply [flat|nested] 22+ messages in thread
* Re: [PATCH 3/3] btf_encoder: Set .BTF section alignment to 16 2021-01-21 20:07 ` Andrii Nakryiko 2021-01-25 12:53 ` Giuliano Procida @ 2021-01-27 15:08 ` Giuliano Procida 2021-01-27 18:06 ` Giuliano Procida 1 sibling, 1 reply; 22+ messages in thread From: Giuliano Procida @ 2021-01-27 15:08 UTC (permalink / raw) To: Andrii Nakryiko Cc: dwarves, kernel-team, Matthias Männich, Alexei Starovoitov, Andrii Nakryiko, bpf, Kernel Team Hi Andrii. On Thu, 21 Jan 2021 at 20:08, Andrii Nakryiko <andrii.nakryiko@gmail.com> wrote: > > On Thu, Jan 21, 2021 at 3:07 AM Giuliano Procida <gprocida@google.com> wrote: > > > > Hi. > > > > On Thu, 21 Jan 2021 at 07:16, Andrii Nakryiko <andrii.nakryiko@gmail.com> wrote: > >> > >> On Mon, Jan 18, 2021 at 8:01 AM Giuliano Procida <gprocida@google.com> wrote: > >> > > >> > This is to avoid misaligned access when memory-mapping ELF sections. > >> > > >> > Signed-off-by: Giuliano Procida <gprocida@google.com> > >> > --- > >> > libbtf.c | 8 ++++++++ > >> > 1 file changed, 8 insertions(+) > >> > > >> > diff --git a/libbtf.c b/libbtf.c > >> > index 7552d8e..2f12d53 100644 > >> > --- a/libbtf.c > >> > +++ b/libbtf.c > >> > @@ -797,6 +797,14 @@ static int btf_elf__write(const char *filename, struct btf *btf) > >> > goto unlink; > >> > } > >> > > >> > + snprintf(cmd, sizeof(cmd), "%s --set-section-alignment .BTF=16 %s", > >> > + llvm_objcopy, filename); > >> > >> does it align inside the ELF file to 16 bytes, or does it request the > >> linker to align it at 16 byte alignment in memory? Given .BTF section > >> is not loadable, trying to understand the implications. > >> > > > > We have a tool that loads BTF from ELF files. It uses mmap and "parses" the BTF as structs in memory. The ELF file is mapped with page alignment but the BTF section within it has no alignment at all. Using MSAN (IIRC) we get warnings about misaligned accesses. Everything within BTF itself is naturally aligned, so it makes sense to align the section within ELF as well. There are probably some architectures where this makes the difference between working and SIGBUS. > > > > Right, ok, thanks for explaining! > > > I did try to get objcopy to set alignment at the point the section is added. However, this didn't work. > > > >> > >> > >> > + if (system(cmd)) { > >> > >> Also curious, if objcopy emits error (saying that > >> --set-section-alignment argument is not recognized), will that error > >> be shown in stdout? or system() consumes it without redirecting it to > >> stdout? > >> > > > > I believe it goes to stderr. I would need to check. system() will not consume this. I'm not keen to write stderr (or stdout) post-processing code in plain C. > > > > You can use popen() to capture/hide output, this is a better > alternative to system() in this case. We don't want "expected > warnings" in kernel build process. > > >> > >> > + /* non-fatal, this is a nice-to-have and it's only supported from LLVM 10 */ > >> > + fprintf(stderr, "%s: warning: failed to align .BTF section in '%s': %d!\n", > >> > + __func__, filename, errno); > >> > >> Probably better to emit this warning only in verbose mode, otherwise > >> lots of people will start complaining that they get some new warnings > >> from pahole. > >> > > > > It may be better to just use POSIX and ELF APIs directly instead of objcopy. This way the section can be added with the right alignment directly. pahole is already linked against libelf and if we could get rid of the external dependency on objcopy it would be a win in more than one way. > > This would be great, yes. At some point I remember giving it a try, > but for some reason I couldn't make libelf flush data and update > section headers properly. Maybe you'll have better luck. Though I > think I was trying to mark section loadable, and eventually I probably > managed to do that, but still abandoned it (it's not enough to mark > section loadable, you have to assign it to ELF segment as well, which > libelf doesn't allow to do and you need linker support). Anyways, give > it a try, it should work. > I found 341dfcf8d78eaa3a2dc96dea06f0392eb2978364 ("btf: expose BTF info through sysfs") and I now see what you mean. Alignment of .BTF as produced by the linker script is currently not down to pahole at all. The kernel link script has to add .BTF in a rather roundabout way because it needs to be added as a loadable segment and pahole only adds it as a plain section. pahole's does this using llvm-objcopy (which I spotted has some side-effects on our AOSP vmlinux). On vanilla kernels, while llvm-objcopy doesn't rewrite (or at least, resize) .strtab, it does renumber sections so that the offset order is monotonic. We're working with .BTF in userspace and haven't needed .BTF as a segment. If I managed to get pahole to make .BTF a loadable segment as well, then the linker scripts could be simplified. I'll see if I can do this part as well. Regards, Giuliano. > > > >> > >> > >> > + } > >> > + > >> > err = 0; > >> > unlink: > >> > unlink(tmp_fn); > >> > -- > >> > 2.30.0.284.gd98b1dd5eaa7-goog > >> > > > > > > > I'll see if I can spend a little time on this idea instead. > > > > Regards, > > Giuliano. > > -- > To unsubscribe from this group and stop receiving emails from it, send an email to kernel-team+unsubscribe@android.com. > ^ permalink raw reply [flat|nested] 22+ messages in thread
* Re: [PATCH 3/3] btf_encoder: Set .BTF section alignment to 16 2021-01-27 15:08 ` Giuliano Procida @ 2021-01-27 18:06 ` Giuliano Procida 2021-01-27 19:56 ` Andrii Nakryiko 0 siblings, 1 reply; 22+ messages in thread From: Giuliano Procida @ 2021-01-27 18:06 UTC (permalink / raw) To: Andrii Nakryiko Cc: dwarves, kernel-team, Matthias Männich, Alexei Starovoitov, Andrii Nakryiko, bpf, Kernel Team Hi. On Wed, 27 Jan 2021 at 15:08, Giuliano Procida <gprocida@google.com> wrote: > > Hi Andrii. > > On Thu, 21 Jan 2021 at 20:08, Andrii Nakryiko <andrii.nakryiko@gmail.com> wrote: > > > > On Thu, Jan 21, 2021 at 3:07 AM Giuliano Procida <gprocida@google.com> wrote: > > > > > > Hi. > > > > > > On Thu, 21 Jan 2021 at 07:16, Andrii Nakryiko <andrii.nakryiko@gmail.com> wrote: > > >> > > >> On Mon, Jan 18, 2021 at 8:01 AM Giuliano Procida <gprocida@google.com> wrote: > > >> > > > >> > This is to avoid misaligned access when memory-mapping ELF sections. > > >> > > > >> > Signed-off-by: Giuliano Procida <gprocida@google.com> > > >> > --- > > >> > libbtf.c | 8 ++++++++ > > >> > 1 file changed, 8 insertions(+) > > >> > > > >> > diff --git a/libbtf.c b/libbtf.c > > >> > index 7552d8e..2f12d53 100644 > > >> > --- a/libbtf.c > > >> > +++ b/libbtf.c > > >> > @@ -797,6 +797,14 @@ static int btf_elf__write(const char *filename, struct btf *btf) > > >> > goto unlink; > > >> > } > > >> > > > >> > + snprintf(cmd, sizeof(cmd), "%s --set-section-alignment .BTF=16 %s", > > >> > + llvm_objcopy, filename); > > >> > > >> does it align inside the ELF file to 16 bytes, or does it request the > > >> linker to align it at 16 byte alignment in memory? Given .BTF section > > >> is not loadable, trying to understand the implications. > > >> > > > > > > We have a tool that loads BTF from ELF files. It uses mmap and "parses" the BTF as structs in memory. The ELF file is mapped with page alignment but the BTF section within it has no alignment at all. Using MSAN (IIRC) we get warnings about misaligned accesses. Everything within BTF itself is naturally aligned, so it makes sense to align the section within ELF as well. There are probably some architectures where this makes the difference between working and SIGBUS. > > > > > > > Right, ok, thanks for explaining! > > > > > I did try to get objcopy to set alignment at the point the section is added. However, this didn't work. > > > > > >> > > >> > > >> > + if (system(cmd)) { > > >> > > >> Also curious, if objcopy emits error (saying that > > >> --set-section-alignment argument is not recognized), will that error > > >> be shown in stdout? or system() consumes it without redirecting it to > > >> stdout? > > >> > > > > > > I believe it goes to stderr. I would need to check. system() will not consume this. I'm not keen to write stderr (or stdout) post-processing code in plain C. > > > > > > > You can use popen() to capture/hide output, this is a better > > alternative to system() in this case. We don't want "expected > > warnings" in kernel build process. > > > > >> > > >> > + /* non-fatal, this is a nice-to-have and it's only supported from LLVM 10 */ > > >> > + fprintf(stderr, "%s: warning: failed to align .BTF section in '%s': %d!\n", > > >> > + __func__, filename, errno); > > >> > > >> Probably better to emit this warning only in verbose mode, otherwise > > >> lots of people will start complaining that they get some new warnings > > >> from pahole. > > >> > > > > > > It may be better to just use POSIX and ELF APIs directly instead of objcopy. This way the section can be added with the right alignment directly. pahole is already linked against libelf and if we could get rid of the external dependency on objcopy it would be a win in more than one way. > > > > This would be great, yes. At some point I remember giving it a try, > > but for some reason I couldn't make libelf flush data and update > > section headers properly. Maybe you'll have better luck. Though I > > think I was trying to mark section loadable, and eventually I probably > > managed to do that, but still abandoned it (it's not enough to mark > > section loadable, you have to assign it to ELF segment as well, which > > libelf doesn't allow to do and you need linker support). Anyways, give > > it a try, it should work. > > > > I found 341dfcf8d78eaa3a2dc96dea06f0392eb2978364 ("btf: expose BTF > info through sysfs") and I now see what you mean. > > Alignment of .BTF as produced by the linker script is currently not > down to pahole at all. The kernel link script has to add .BTF in a > rather roundabout way because it needs to be added as a loadable > segment and pahole only adds it as a plain section. > > pahole's does this using llvm-objcopy (which I spotted has some > side-effects on our AOSP vmlinux). On vanilla kernels, while > llvm-objcopy doesn't rewrite (or at least, resize) .strtab, it does > renumber sections so that the offset order is monotonic. > > We're working with .BTF in userspace and haven't needed .BTF as a > segment. If I managed to get pahole to make .BTF a loadable segment as > well, then the linker scripts could be simplified. I'll see if I can > do this part as well. OK... $ readelf -lW /tmp/vmlinux Elf file type is EXEC (Executable file) Entry point 0x1000000 There are 5 program headers, starting at offset 64 Program Headers: Type Offset VirtAddr PhysAddr FileSiz MemSiz Flg Align LOAD 0x200000 0xffffffff81000000 0x0000000001000000 0x167be37 0x167be37 R E 0x200000 LOAD 0x1a00000 0xffffffff82800000 0x0000000002800000 0x5a6000 0x5a6000 RW 0x200000 LOAD 0x2000000 0x0000000000000000 0x0000000002da6000 0x02a258 0x02a258 RW 0x200000 LOAD 0x21d1000 0xffffffff82dd1000 0x0000000002dd1000 0x104000 0x25b000 RWE 0x200000 NOTE 0x152ac30 0xffffffff8232ac30 0x000000000232ac30 0x00003c 0x00003c 0x4 Section to Segment mapping: Segment Sections... 00 .text .rodata .pci_fixup .tracedata __ksymtab __ksymtab_gpl __ksymtab_strings __param __modver __ex_table .notes .BTF 01 .data __bug_table .orc_unwind_ip .orc_unwind .orc_lookup .vvar 02 .data..percpu 03 .init.text .altinstr_aux .init.data .x86_cpu_dev.init .altinstructions .altinstr_replacement .iommu_table .apicdrivers .exit.text .smp_locks .data_nosave .bss .brk 04 .notes This is the end result. The sausage factory (gen_btf / vmlinux_link - which I've now read through) actually does: * link a temporary vmlinux * run pahole -J on this * dump out the .BTF as a raw file (anything clever pahole does with ELF is thrown away here) * create an ELF file with arch and format to match vmlinux, containing a single .BTF section * link this ELF file with the other bits of the kernel. As a DWARF to BTF converter, pahole's role is clear. At this point I'd like to separate what's useful for the kernel and what's useful in terms of generally packaging up .BTF as a kind of debug information for general use. Packaging up BTF as an ELF section or linking this into the kernel is a lot of work to do properly in pahole and duplicates the role of the linker. If I continue, I'll probably end up creating a disjoint R segment just for .BTF and I don't know if that's OK. I'm not sure how much more work is needed to get to the point where all the various objcopy/objdump can be eliminated or whether this is a worthwhile goal. Another way of getting rid of the objcopy/objdump dependencies for the kernel would be to just emit an ELF file containing the .BTF section only and let the linker do its thing. For non-kernel use, I'm not sure of the implications of letting libelf reorder all the sections, or if we'd ever want the .BTF to be in a loadable segment. If anything, I'd advocate for having pahole just generate raw BTF output. However, I know there's a big convenience factor in having debug (type) info packaged into the ELF. So I'm not sure if it's worth pursuing the line of work beyond eliminating pahole's dependency on llvm-objcopy. In terms of my follow-up series, this might mean dropping 3/4 (as preserving existing ELF layout in the temporary vmlinux isn't needed) but keeping 4/4 (as it's useful to us, even if it's currently useless for the kernel). If we cannot get libelf to make the right kind of sausage, then I agree that vmlinux .BTF alignment should probably follow your earlier suggestion of `. = ALIGN(8)` in vmlinux.lds.h. And we haven't even got to discussing modules and merging .BTF info. :-) Regards, Giuliano. > Regards, > Giuliano. > > > > > > >> > > >> > > >> > + } > > >> > + > > >> > err = 0; > > >> > unlink: > > >> > unlink(tmp_fn); > > >> > -- > > >> > 2.30.0.284.gd98b1dd5eaa7-goog > > >> > > > > > > > > > > I'll see if I can spend a little time on this idea instead. > > > > > > Regards, > > > Giuliano. > > > > -- > > To unsubscribe from this group and stop receiving emails from it, send an email to kernel-team+unsubscribe@android.com. > > ^ permalink raw reply [flat|nested] 22+ messages in thread
* Re: [PATCH 3/3] btf_encoder: Set .BTF section alignment to 16 2021-01-27 18:06 ` Giuliano Procida @ 2021-01-27 19:56 ` Andrii Nakryiko 0 siblings, 0 replies; 22+ messages in thread From: Andrii Nakryiko @ 2021-01-27 19:56 UTC (permalink / raw) To: Giuliano Procida Cc: dwarves, kernel-team, Matthias Männich, Alexei Starovoitov, Andrii Nakryiko, bpf, Kernel Team On Wed, Jan 27, 2021 at 10:07 AM Giuliano Procida <gprocida@google.com> wrote: > > Hi. > > On Wed, 27 Jan 2021 at 15:08, Giuliano Procida <gprocida@google.com> wrote: > > > > Hi Andrii. > > > > On Thu, 21 Jan 2021 at 20:08, Andrii Nakryiko <andrii.nakryiko@gmail.com> wrote: > > > > > > On Thu, Jan 21, 2021 at 3:07 AM Giuliano Procida <gprocida@google.com> wrote: > > > > > > > > Hi. > > > > > > > > On Thu, 21 Jan 2021 at 07:16, Andrii Nakryiko <andrii.nakryiko@gmail.com> wrote: > > > >> > > > >> On Mon, Jan 18, 2021 at 8:01 AM Giuliano Procida <gprocida@google.com> wrote: > > > >> > > > > >> > This is to avoid misaligned access when memory-mapping ELF sections. > > > >> > > > > >> > Signed-off-by: Giuliano Procida <gprocida@google.com> > > > >> > --- > > > >> > libbtf.c | 8 ++++++++ > > > >> > 1 file changed, 8 insertions(+) > > > >> > > > > >> > diff --git a/libbtf.c b/libbtf.c > > > >> > index 7552d8e..2f12d53 100644 > > > >> > --- a/libbtf.c > > > >> > +++ b/libbtf.c > > > >> > @@ -797,6 +797,14 @@ static int btf_elf__write(const char *filename, struct btf *btf) > > > >> > goto unlink; > > > >> > } > > > >> > > > > >> > + snprintf(cmd, sizeof(cmd), "%s --set-section-alignment .BTF=16 %s", > > > >> > + llvm_objcopy, filename); > > > >> > > > >> does it align inside the ELF file to 16 bytes, or does it request the > > > >> linker to align it at 16 byte alignment in memory? Given .BTF section > > > >> is not loadable, trying to understand the implications. > > > >> > > > > > > > > We have a tool that loads BTF from ELF files. It uses mmap and "parses" the BTF as structs in memory. The ELF file is mapped with page alignment but the BTF section within it has no alignment at all. Using MSAN (IIRC) we get warnings about misaligned accesses. Everything within BTF itself is naturally aligned, so it makes sense to align the section within ELF as well. There are probably some architectures where this makes the difference between working and SIGBUS. > > > > > > > > > > Right, ok, thanks for explaining! > > > > > > > I did try to get objcopy to set alignment at the point the section is added. However, this didn't work. > > > > > > > >> > > > >> > > > >> > + if (system(cmd)) { > > > >> > > > >> Also curious, if objcopy emits error (saying that > > > >> --set-section-alignment argument is not recognized), will that error > > > >> be shown in stdout? or system() consumes it without redirecting it to > > > >> stdout? > > > >> > > > > > > > > I believe it goes to stderr. I would need to check. system() will not consume this. I'm not keen to write stderr (or stdout) post-processing code in plain C. > > > > > > > > > > You can use popen() to capture/hide output, this is a better > > > alternative to system() in this case. We don't want "expected > > > warnings" in kernel build process. > > > > > > >> > > > >> > + /* non-fatal, this is a nice-to-have and it's only supported from LLVM 10 */ > > > >> > + fprintf(stderr, "%s: warning: failed to align .BTF section in '%s': %d!\n", > > > >> > + __func__, filename, errno); > > > >> > > > >> Probably better to emit this warning only in verbose mode, otherwise > > > >> lots of people will start complaining that they get some new warnings > > > >> from pahole. > > > >> > > > > > > > > It may be better to just use POSIX and ELF APIs directly instead of objcopy. This way the section can be added with the right alignment directly. pahole is already linked against libelf and if we could get rid of the external dependency on objcopy it would be a win in more than one way. > > > > > > This would be great, yes. At some point I remember giving it a try, > > > but for some reason I couldn't make libelf flush data and update > > > section headers properly. Maybe you'll have better luck. Though I > > > think I was trying to mark section loadable, and eventually I probably > > > managed to do that, but still abandoned it (it's not enough to mark > > > section loadable, you have to assign it to ELF segment as well, which > > > libelf doesn't allow to do and you need linker support). Anyways, give > > > it a try, it should work. > > > > > > > I found 341dfcf8d78eaa3a2dc96dea06f0392eb2978364 ("btf: expose BTF > > info through sysfs") and I now see what you mean. > > > > Alignment of .BTF as produced by the linker script is currently not > > down to pahole at all. The kernel link script has to add .BTF in a > > rather roundabout way because it needs to be added as a loadable > > segment and pahole only adds it as a plain section. > > > > pahole's does this using llvm-objcopy (which I spotted has some > > side-effects on our AOSP vmlinux). On vanilla kernels, while > > llvm-objcopy doesn't rewrite (or at least, resize) .strtab, it does > > renumber sections so that the offset order is monotonic. > > > > We're working with .BTF in userspace and haven't needed .BTF as a > > segment. If I managed to get pahole to make .BTF a loadable segment as > > well, then the linker scripts could be simplified. I'll see if I can > > do this part as well. > > OK... > > $ readelf -lW /tmp/vmlinux > > Elf file type is EXEC (Executable file) > Entry point 0x1000000 > There are 5 program headers, starting at offset 64 > > Program Headers: > Type Offset VirtAddr PhysAddr > FileSiz MemSiz Flg Align > LOAD 0x200000 0xffffffff81000000 0x0000000001000000 > 0x167be37 0x167be37 R E 0x200000 > LOAD 0x1a00000 0xffffffff82800000 0x0000000002800000 > 0x5a6000 0x5a6000 RW 0x200000 > LOAD 0x2000000 0x0000000000000000 0x0000000002da6000 > 0x02a258 0x02a258 RW 0x200000 > LOAD 0x21d1000 0xffffffff82dd1000 0x0000000002dd1000 > 0x104000 0x25b000 RWE 0x200000 > NOTE 0x152ac30 0xffffffff8232ac30 0x000000000232ac30 > 0x00003c 0x00003c 0x4 > > Section to Segment mapping: > Segment Sections... > 00 .text .rodata .pci_fixup .tracedata __ksymtab __ksymtab_gpl > __ksymtab_strings __param __modver __ex_table .notes .BTF > 01 .data __bug_table .orc_unwind_ip .orc_unwind .orc_lookup .vvar > 02 .data..percpu > 03 .init.text .altinstr_aux .init.data .x86_cpu_dev.init > .altinstructions .altinstr_replacement .iommu_table .apicdrivers > .exit.text .smp_locks .data_nosave .bss .brk > 04 .notes > > This is the end result. The sausage factory (gen_btf / vmlinux_link - > which I've now read through) actually does: > > * link a temporary vmlinux > * run pahole -J on this > * dump out the .BTF as a raw file (anything clever pahole does with > ELF is thrown away here) > * create an ELF file with arch and format to match vmlinux, containing > a single .BTF section > * link this ELF file with the other bits of the kernel. > > As a DWARF to BTF converter, pahole's role is clear. At this point I'd > like to separate what's useful for the kernel and what's useful in > terms of generally packaging up .BTF as a kind of debug information > for general use. > > Packaging up BTF as an ELF section or linking this into the kernel is > a lot of work to do properly in pahole and duplicates the role of the > linker. If I continue, I'll probably end up creating a disjoint R > segment just for .BTF and I don't know if that's OK. I'm not sure how > much more work is needed to get to the point where all the various > objcopy/objdump can be eliminated or whether this is a worthwhile > goal. Another way of getting rid of the objcopy/objdump dependencies > for the kernel would be to just emit an ELF file containing the .BTF > section only and let the linker do its thing. > > For non-kernel use, I'm not sure of the implications of letting libelf > reorder all the sections, or if we'd ever want the .BTF to be in a > loadable segment. If anything, I'd advocate for having pahole just > generate raw BTF output. However, I know there's a big convenience > factor in having debug (type) info packaged into the ELF. At this point I don't think pahole can mark .BTF as loadable, at best it should be an opt-in. Order of .BTF section relative to others shouldn't matter, though. I, honestly, lost track of what's the latest status of your work, but if it's dangerous to do with libelf, I'd use llvm-objcopy, but would do better detection of --set-section-alignment. > > So I'm not sure if it's worth pursuing the line of work beyond > eliminating pahole's dependency on llvm-objcopy. In terms of my > follow-up series, this might mean dropping 3/4 (as preserving existing > ELF layout in the temporary vmlinux isn't needed) but keeping 4/4 (as > it's useful to us, even if it's currently useless for the kernel). Right, I'm not aware of any other use case beyond vmlinux and kernel modules where BTF has to be in a loadable section. > > If we cannot get libelf to make the right kind of sausage, then I > agree that vmlinux .BTF alignment should probably follow your earlier > suggestion of `. = ALIGN(8)` in vmlinux.lds.h. this can be done independent of all the other decisions, IMO > > And we haven't even got to discussing modules and merging .BTF info. :-) that shouldn't matter at all, in the end it's a single .BTF blob that needs to be put into ELF > > Regards, > Giuliano. > > > > Regards, > > Giuliano. > > > > > > > > > >> > > > >> > > > >> > + } > > > >> > + > > > >> > err = 0; > > > >> > unlink: > > > >> > unlink(tmp_fn); > > > >> > -- > > > >> > 2.30.0.284.gd98b1dd5eaa7-goog > > > >> > > > > > > > > > > > > > I'll see if I can spend a little time on this idea instead. > > > > > > > > Regards, > > > > Giuliano. > > > > > > -- > > > To unsubscribe from this group and stop receiving emails from it, send an email to kernel-team+unsubscribe@android.com. > > > ^ permalink raw reply [flat|nested] 22+ messages in thread
* [PATCH dwarves v2 0/3] Small fixes and improvements 2021-01-18 16:01 [PATCH 0/3] Small fixes and improvements Giuliano Procida ` (2 preceding siblings ...) 2021-01-18 16:01 ` [PATCH 3/3] btf_encoder: Set .BTF section alignment to 16 Giuliano Procida @ 2021-01-21 11:35 ` Giuliano Procida 2021-01-21 11:35 ` [PATCH dwarves v2 1/3] btf_encoder: Fix handling of restrict qualifier Giuliano Procida ` (2 more replies) 3 siblings, 3 replies; 22+ messages in thread From: Giuliano Procida @ 2021-01-21 11:35 UTC (permalink / raw) To: dwarves Cc: kernel-team, maennich, ast, andrii, bpf, kernel-team, Giuliano Procida Hi. 1 is a bug fix affecting restrict qualifiers. 2 avoids leaving debris if objcopy fails. 3 aligns the BTF section to 16 bytes to avoid misaligned access. Note: I think 3 should be in abandoned in favour of using libelf directly. I'll give this a go. This would also obsolete 2 in its current form. Regards. Giuliano Procida (3): btf_encoder: Fix handling of restrict qualifier btf_encoder: Improve error-handling around objcopy btf_encoder: Set .BTF section alignment to 16 libbtf.c | 17 +++++++++++++---- 1 file changed, 13 insertions(+), 4 deletions(-) -- 2.30.0.296.g2bfb1c46d8-goog ^ permalink raw reply [flat|nested] 22+ messages in thread
* [PATCH dwarves v2 1/3] btf_encoder: Fix handling of restrict qualifier 2021-01-21 11:35 ` [PATCH dwarves v2 0/3] Small fixes and improvements Giuliano Procida @ 2021-01-21 11:35 ` Giuliano Procida 2021-01-21 13:21 ` Arnaldo Carvalho de Melo 2021-01-21 11:35 ` [PATCH dwarves v2 2/3] btf_encoder: Improve error-handling around objcopy Giuliano Procida 2021-01-21 11:35 ` [PATCH dwarves v2 3/3] btf_encoder: Set .BTF section alignment to 16 Giuliano Procida 2 siblings, 1 reply; 22+ messages in thread From: Giuliano Procida @ 2021-01-21 11:35 UTC (permalink / raw) To: dwarves Cc: kernel-team, maennich, ast, andrii, bpf, kernel-team, Giuliano Procida This corrects a typo that resulted in 'restrict' being treated as 'const'. Fixes: 48efa92933e8 ("btf_encoder: Use libbpf APIs to encode BTF type info") Acked-by: Andrii Nakryiko <andrii@kernel.org> Signed-off-by: Giuliano Procida <gprocida@google.com> --- libbtf.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/libbtf.c b/libbtf.c index 16e1d45..3709087 100644 --- a/libbtf.c +++ b/libbtf.c @@ -417,7 +417,7 @@ int32_t btf_elf__add_ref_type(struct btf_elf *btfe, uint16_t kind, uint32_t type id = btf__add_const(btf, type); break; case BTF_KIND_RESTRICT: - id = btf__add_const(btf, type); + id = btf__add_restrict(btf, type); break; case BTF_KIND_TYPEDEF: id = btf__add_typedef(btf, name, type); -- 2.30.0.296.g2bfb1c46d8-goog ^ permalink raw reply related [flat|nested] 22+ messages in thread
* Re: [PATCH dwarves v2 1/3] btf_encoder: Fix handling of restrict qualifier 2021-01-21 11:35 ` [PATCH dwarves v2 1/3] btf_encoder: Fix handling of restrict qualifier Giuliano Procida @ 2021-01-21 13:21 ` Arnaldo Carvalho de Melo 0 siblings, 0 replies; 22+ messages in thread From: Arnaldo Carvalho de Melo @ 2021-01-21 13:21 UTC (permalink / raw) To: Giuliano Procida Cc: dwarves, kernel-team, maennich, ast, andrii, bpf, kernel-team Em Thu, Jan 21, 2021 at 11:35:18AM +0000, Giuliano Procida escreveu: > This corrects a typo that resulted in 'restrict' being treated as 'const'. > > Fixes: 48efa92933e8 ("btf_encoder: Use libbpf APIs to encode BTF type info") Thanks for providing the Fixes: tag! Applied, - Arnaldo > Acked-by: Andrii Nakryiko <andrii@kernel.org> > Signed-off-by: Giuliano Procida <gprocida@google.com> > --- > libbtf.c | 2 +- > 1 file changed, 1 insertion(+), 1 deletion(-) > > diff --git a/libbtf.c b/libbtf.c > index 16e1d45..3709087 100644 > --- a/libbtf.c > +++ b/libbtf.c > @@ -417,7 +417,7 @@ int32_t btf_elf__add_ref_type(struct btf_elf *btfe, uint16_t kind, uint32_t type > id = btf__add_const(btf, type); > break; > case BTF_KIND_RESTRICT: > - id = btf__add_const(btf, type); > + id = btf__add_restrict(btf, type); > break; > case BTF_KIND_TYPEDEF: > id = btf__add_typedef(btf, name, type); > -- > 2.30.0.296.g2bfb1c46d8-goog > -- - Arnaldo ^ permalink raw reply [flat|nested] 22+ messages in thread
* [PATCH dwarves v2 2/3] btf_encoder: Improve error-handling around objcopy 2021-01-21 11:35 ` [PATCH dwarves v2 0/3] Small fixes and improvements Giuliano Procida 2021-01-21 11:35 ` [PATCH dwarves v2 1/3] btf_encoder: Fix handling of restrict qualifier Giuliano Procida @ 2021-01-21 11:35 ` Giuliano Procida 2021-01-21 13:24 ` Arnaldo Carvalho de Melo 2021-01-21 11:35 ` [PATCH dwarves v2 3/3] btf_encoder: Set .BTF section alignment to 16 Giuliano Procida 2 siblings, 1 reply; 22+ messages in thread From: Giuliano Procida @ 2021-01-21 11:35 UTC (permalink / raw) To: dwarves Cc: kernel-team, maennich, ast, andrii, bpf, kernel-team, Giuliano Procida * Report the correct filename when objcopy fails. * Unlink the temporary file on error. Acked-by: Andrii Nakryiko <andrii@kernel.org> Signed-off-by: Giuliano Procida <gprocida@google.com> --- libbtf.c | 7 ++++--- 1 file changed, 4 insertions(+), 3 deletions(-) diff --git a/libbtf.c b/libbtf.c index 3709087..7552d8e 100644 --- a/libbtf.c +++ b/libbtf.c @@ -786,18 +786,19 @@ static int btf_elf__write(const char *filename, struct btf *btf) if (write(fd, raw_btf_data, raw_btf_size) != raw_btf_size) { fprintf(stderr, "%s: write of %d bytes to '%s' failed: %d!\n", __func__, raw_btf_size, tmp_fn, errno); - goto out; + goto unlink; } snprintf(cmd, sizeof(cmd), "%s --add-section .BTF=%s %s", llvm_objcopy, tmp_fn, filename); if (system(cmd)) { fprintf(stderr, "%s: failed to add .BTF section to '%s': %d!\n", - __func__, tmp_fn, errno); - goto out; + __func__, filename, errno); + goto unlink; } err = 0; + unlink: unlink(tmp_fn); } -- 2.30.0.296.g2bfb1c46d8-goog ^ permalink raw reply related [flat|nested] 22+ messages in thread
* Re: [PATCH dwarves v2 2/3] btf_encoder: Improve error-handling around objcopy 2021-01-21 11:35 ` [PATCH dwarves v2 2/3] btf_encoder: Improve error-handling around objcopy Giuliano Procida @ 2021-01-21 13:24 ` Arnaldo Carvalho de Melo 0 siblings, 0 replies; 22+ messages in thread From: Arnaldo Carvalho de Melo @ 2021-01-21 13:24 UTC (permalink / raw) To: Giuliano Procida Cc: dwarves, kernel-team, maennich, ast, andrii, bpf, kernel-team Em Thu, Jan 21, 2021 at 11:35:19AM +0000, Giuliano Procida escreveu: > * Report the correct filename when objcopy fails. > * Unlink the temporary file on error. Thanks, applied. - Arnaldo > Acked-by: Andrii Nakryiko <andrii@kernel.org> > Signed-off-by: Giuliano Procida <gprocida@google.com> > --- > libbtf.c | 7 ++++--- > 1 file changed, 4 insertions(+), 3 deletions(-) > > diff --git a/libbtf.c b/libbtf.c > index 3709087..7552d8e 100644 > --- a/libbtf.c > +++ b/libbtf.c > @@ -786,18 +786,19 @@ static int btf_elf__write(const char *filename, struct btf *btf) > if (write(fd, raw_btf_data, raw_btf_size) != raw_btf_size) { > fprintf(stderr, "%s: write of %d bytes to '%s' failed: %d!\n", > __func__, raw_btf_size, tmp_fn, errno); > - goto out; > + goto unlink; > } > > snprintf(cmd, sizeof(cmd), "%s --add-section .BTF=%s %s", > llvm_objcopy, tmp_fn, filename); > if (system(cmd)) { > fprintf(stderr, "%s: failed to add .BTF section to '%s': %d!\n", > - __func__, tmp_fn, errno); > - goto out; > + __func__, filename, errno); > + goto unlink; > } > > err = 0; > + unlink: > unlink(tmp_fn); > } > > -- > 2.30.0.296.g2bfb1c46d8-goog > -- - Arnaldo ^ permalink raw reply [flat|nested] 22+ messages in thread
* [PATCH dwarves v2 3/3] btf_encoder: Set .BTF section alignment to 16 2021-01-21 11:35 ` [PATCH dwarves v2 0/3] Small fixes and improvements Giuliano Procida 2021-01-21 11:35 ` [PATCH dwarves v2 1/3] btf_encoder: Fix handling of restrict qualifier Giuliano Procida 2021-01-21 11:35 ` [PATCH dwarves v2 2/3] btf_encoder: Improve error-handling around objcopy Giuliano Procida @ 2021-01-21 11:35 ` Giuliano Procida 2021-01-21 13:23 ` Arnaldo Carvalho de Melo 2 siblings, 1 reply; 22+ messages in thread From: Giuliano Procida @ 2021-01-21 11:35 UTC (permalink / raw) To: dwarves Cc: kernel-team, maennich, ast, andrii, bpf, kernel-team, Giuliano Procida NOTE: Do not apply. I will try to eliminate the dependency on objcopy instead and achieve what's needed directly using libelf. This is to avoid misaligned access when memory-mapping ELF sections. Signed-off-by: Giuliano Procida <gprocida@google.com> --- libbtf.c | 8 ++++++++ 1 file changed, 8 insertions(+) diff --git a/libbtf.c b/libbtf.c index 7552d8e..2f12d53 100644 --- a/libbtf.c +++ b/libbtf.c @@ -797,6 +797,14 @@ static int btf_elf__write(const char *filename, struct btf *btf) goto unlink; } + snprintf(cmd, sizeof(cmd), "%s --set-section-alignment .BTF=16 %s", + llvm_objcopy, filename); + if (system(cmd)) { + /* non-fatal, this is a nice-to-have and it's only supported from LLVM 10 */ + fprintf(stderr, "%s: warning: failed to align .BTF section in '%s': %d!\n", + __func__, filename, errno); + } + err = 0; unlink: unlink(tmp_fn); -- 2.30.0.296.g2bfb1c46d8-goog ^ permalink raw reply related [flat|nested] 22+ messages in thread
* Re: [PATCH dwarves v2 3/3] btf_encoder: Set .BTF section alignment to 16 2021-01-21 11:35 ` [PATCH dwarves v2 3/3] btf_encoder: Set .BTF section alignment to 16 Giuliano Procida @ 2021-01-21 13:23 ` Arnaldo Carvalho de Melo 0 siblings, 0 replies; 22+ messages in thread From: Arnaldo Carvalho de Melo @ 2021-01-21 13:23 UTC (permalink / raw) To: Giuliano Procida Cc: dwarves, kernel-team, maennich, ast, andrii, bpf, kernel-team Em Thu, Jan 21, 2021 at 11:35:20AM +0000, Giuliano Procida escreveu: > NOTE: Do not apply. I will try to eliminate the dependency on objcopy > instead and achieve what's needed directly using libelf. Ok, so I'll wait for the right fix. Thanks for working on this! - Arnaldo > This is to avoid misaligned access when memory-mapping ELF sections. > > Signed-off-by: Giuliano Procida <gprocida@google.com> > --- > libbtf.c | 8 ++++++++ > 1 file changed, 8 insertions(+) > > diff --git a/libbtf.c b/libbtf.c > index 7552d8e..2f12d53 100644 > --- a/libbtf.c > +++ b/libbtf.c > @@ -797,6 +797,14 @@ static int btf_elf__write(const char *filename, struct btf *btf) > goto unlink; > } > > + snprintf(cmd, sizeof(cmd), "%s --set-section-alignment .BTF=16 %s", > + llvm_objcopy, filename); > + if (system(cmd)) { > + /* non-fatal, this is a nice-to-have and it's only supported from LLVM 10 */ > + fprintf(stderr, "%s: warning: failed to align .BTF section in '%s': %d!\n", > + __func__, filename, errno); > + } > + > err = 0; > unlink: > unlink(tmp_fn); > -- > 2.30.0.296.g2bfb1c46d8-goog > -- - Arnaldo ^ permalink raw reply [flat|nested] 22+ messages in thread
end of thread, other threads:[~2021-01-27 19:57 UTC | newest]
Thread overview: 22+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2021-01-18 16:01 [PATCH 0/3] Small fixes and improvements Giuliano Procida
2021-01-18 16:01 ` [PATCH 1/3] btf_encoder: Fix handling of restrict qualifier Giuliano Procida
2021-01-21 7:07 ` Andrii Nakryiko
2021-01-21 13:04 ` Arnaldo Carvalho de Melo
2021-01-18 16:01 ` [PATCH 2/3] btf_encoder: Improve error-handling around objcopy Giuliano Procida
2021-01-21 7:09 ` Andrii Nakryiko
2021-01-18 16:01 ` [PATCH 3/3] btf_encoder: Set .BTF section alignment to 16 Giuliano Procida
2021-01-21 7:16 ` Andrii Nakryiko
[not found] ` <CAGvU0HmE+gs8eNQcXmFrEERHaiGEnMgqxBho4Ny3DLCe6WR55Q@mail.gmail.com>
2021-01-21 20:07 ` Andrii Nakryiko
2021-01-25 12:53 ` Giuliano Procida
2021-01-26 0:28 ` Andrii Nakryiko
2021-01-26 11:43 ` Giuliano Procida
2021-01-27 15:08 ` Giuliano Procida
2021-01-27 18:06 ` Giuliano Procida
2021-01-27 19:56 ` Andrii Nakryiko
2021-01-21 11:35 ` [PATCH dwarves v2 0/3] Small fixes and improvements Giuliano Procida
2021-01-21 11:35 ` [PATCH dwarves v2 1/3] btf_encoder: Fix handling of restrict qualifier Giuliano Procida
2021-01-21 13:21 ` Arnaldo Carvalho de Melo
2021-01-21 11:35 ` [PATCH dwarves v2 2/3] btf_encoder: Improve error-handling around objcopy Giuliano Procida
2021-01-21 13:24 ` Arnaldo Carvalho de Melo
2021-01-21 11:35 ` [PATCH dwarves v2 3/3] btf_encoder: Set .BTF section alignment to 16 Giuliano Procida
2021-01-21 13:23 ` Arnaldo Carvalho de Melo
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.