All of lore.kernel.org
 help / color / mirror / Atom feed
From: "Jonathan Neuschäfer" <j.neuschaefer@gmx.net>
To: linux-kernel@vger.kernel.org
Cc: "Lee Jones" <lee.jones@linaro.org>,
	"Rob Herring" <robh+dt@kernel.org>,
	"Jonathan Neuschäfer" <j.neuschaefer@gmx.net>,
	"Thierry Reding" <thierry.reding@gmail.com>,
	"Uwe Kleine-König" <u.kleine-koenig@pengutronix.de>,
	"Alessandro Zummo" <a.zummo@towertech.it>,
	"Alexandre Belloni" <alexandre.belloni@bootlin.com>,
	"Shawn Guo" <shawnguo@kernel.org>,
	"Sascha Hauer" <s.hauer@pengutronix.de>,
	"Pengutronix Kernel Team" <kernel@pengutronix.de>,
	"Fabio Estevam" <festevam@gmail.com>,
	"NXP Linux Team" <linux-imx@nxp.com>,
	"Sam Ravnborg" <sam@ravnborg.org>,
	"Linus Walleij" <linus.walleij@linaro.org>,
	"Heiko Stuebner" <heiko.stuebner@theobroma-systems.com>,
	"Stephan Gerhold" <stephan@gerhold.net>,
	"Lubomir Rintel" <lkundrak@v3.sk>,
	"Mark Brown" <broonie@kernel.org>, allen <allen.chen@ite.com.tw>,
	"Mauro Carvalho Chehab" <mchehab+huawei@kernel.org>,
	"David S. Miller" <davem@davemloft.net>,
	devicetree@vger.kernel.org, linux-pwm@vger.kernel.org,
	linux-rtc@vger.kernel.org, linux-arm-kernel@lists.infradead.org,
	"Heiko Stuebner" <heiko@sntech.de>,
	"Josua Mayer" <josua.mayer@jm0.eu>,
	"Andreas Kemnade" <andreas@kemnade.info>,
	"Arnd Bergmann" <arnd@arndb.de>,
	"Daniel Palmer" <daniel@0x0f.com>,
	"Andy Shevchenko" <andy.shevchenko@gmail.com>
Subject: [PATCH v9 5/7] rtc: New driver for RTC in Netronix embedded controller
Date: Sun, 24 Jan 2021 22:41:25 +0100	[thread overview]
Message-ID: <20210124214127.3631530-6-j.neuschaefer@gmx.net> (raw)
In-Reply-To: <20210124214127.3631530-1-j.neuschaefer@gmx.net>

With this driver, mainline Linux can keep its time and date in sync with
the vendor kernel.

Advanced functionality like alarm and automatic power-on is not yet
supported.

Signed-off-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net>
Acked-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
---
v9:
- no changes

v8:
- https://lore.kernel.org/lkml/20210116194826.3866540-6-j.neuschaefer@gmx.net/
- Copy dev.of_node from parent device

v7:
- Adjust to recent RTC API change (rtc_register_device -> devm_rtc_register_device)

v6:
- no changes

v5:
- Add Alexandre Belloni's A-b
- Use regmap_multi_reg_write

v4:
- Remove "driver" from Kconfig entry for consistency with most other entries
- Add missing MODULE_ALIAS line
- Give NTXEC_REG_READ_ macros longer names
- Solve the read tearing issue using Alexandre Belloni's algorithm
- Solve the write tearing issue using Uwe Kleine-König's algorithm
- Spell out ODM

v3:
- Add email address to copyright line
- Remove OF compatible string and don't include linux/of_device.h
- Don't use a comma after sentinels
- Avoid ret |= ... pattern
- Move 8-bit register conversion to ntxec.h
- Relicense as GPLv2 or later

v2:
- Rework top-of-file comment [Lee Jones]
- Sort the #include lines [Alexandre Belloni]
- don't align = signs in struct initializers [Uwe Kleine-König]
- Switch to regmap
- Fix register number used to read minutes and seconds
- Prefix registers with NTXEC_REG_
- Add help text to the Kconfig option
- Use devm_rtc_allocate_device and rtc_register_device, set ->range_min and ->range_max
---
 drivers/rtc/Kconfig     |   8 +++
 drivers/rtc/Makefile    |   1 +
 drivers/rtc/rtc-ntxec.c | 145 ++++++++++++++++++++++++++++++++++++++++
 3 files changed, 154 insertions(+)
 create mode 100644 drivers/rtc/rtc-ntxec.c

diff --git a/drivers/rtc/Kconfig b/drivers/rtc/Kconfig
index 6123f9f4fbc90..d49cf387add14 100644
--- a/drivers/rtc/Kconfig
+++ b/drivers/rtc/Kconfig
@@ -1315,6 +1315,14 @@ config RTC_DRV_CROS_EC
 	  This driver can also be built as a module. If so, the module
 	  will be called rtc-cros-ec.

+config RTC_DRV_NTXEC
+	tristate "Netronix embedded controller RTC"
+	depends on MFD_NTXEC
+	help
+	  Say yes here if you want to support the RTC functionality of the
+	  embedded controller found in certain e-book readers designed by the
+	  original design manufacturer Netronix.
+
 comment "on-CPU RTC drivers"

 config RTC_DRV_ASM9260
diff --git a/drivers/rtc/Makefile b/drivers/rtc/Makefile
index bb8f319b09fbf..92c26eafe70ce 100644
--- a/drivers/rtc/Makefile
+++ b/drivers/rtc/Makefile
@@ -110,6 +110,7 @@ obj-$(CONFIG_RTC_DRV_MT7622)	+= rtc-mt7622.o
 obj-$(CONFIG_RTC_DRV_MV)	+= rtc-mv.o
 obj-$(CONFIG_RTC_DRV_MXC)	+= rtc-mxc.o
 obj-$(CONFIG_RTC_DRV_MXC_V2)	+= rtc-mxc_v2.o
+obj-$(CONFIG_RTC_DRV_NTXEC)	+= rtc-ntxec.o
 obj-$(CONFIG_RTC_DRV_OMAP)	+= rtc-omap.o
 obj-$(CONFIG_RTC_DRV_OPAL)	+= rtc-opal.o
 obj-$(CONFIG_RTC_DRV_PALMAS)	+= rtc-palmas.o
diff --git a/drivers/rtc/rtc-ntxec.c b/drivers/rtc/rtc-ntxec.c
new file mode 100644
index 0000000000000..850ca49186fdc
--- /dev/null
+++ b/drivers/rtc/rtc-ntxec.c
@@ -0,0 +1,145 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * The Netronix embedded controller is a microcontroller found in some
+ * e-book readers designed by the original design manufacturer Netronix, Inc.
+ * It contains RTC, battery monitoring, system power management, and PWM
+ * functionality.
+ *
+ * This driver implements access to the RTC time and date.
+ *
+ * Copyright 2020 Jonathan Neuschäfer <j.neuschaefer@gmx.net>
+ */
+
+#include <linux/mfd/ntxec.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/regmap.h>
+#include <linux/rtc.h>
+#include <linux/types.h>
+
+struct ntxec_rtc {
+	struct device *dev;
+	struct ntxec *ec;
+};
+
+#define NTXEC_REG_WRITE_YEAR	0x10
+#define NTXEC_REG_WRITE_MONTH	0x11
+#define NTXEC_REG_WRITE_DAY	0x12
+#define NTXEC_REG_WRITE_HOUR	0x13
+#define NTXEC_REG_WRITE_MINUTE	0x14
+#define NTXEC_REG_WRITE_SECOND	0x15
+
+#define NTXEC_REG_READ_YEAR_MONTH	0x20
+#define NTXEC_REG_READ_MDAY_HOUR	0x21
+#define NTXEC_REG_READ_MINUTE_SECOND	0x23
+
+static int ntxec_read_time(struct device *dev, struct rtc_time *tm)
+{
+	struct ntxec_rtc *rtc = dev_get_drvdata(dev);
+	unsigned int value;
+	int res;
+
+retry:
+	res = regmap_read(rtc->ec->regmap, NTXEC_REG_READ_MINUTE_SECOND, &value);
+	if (res < 0)
+		return res;
+
+	tm->tm_min = value >> 8;
+	tm->tm_sec = value & 0xff;
+
+	res = regmap_read(rtc->ec->regmap, NTXEC_REG_READ_MDAY_HOUR, &value);
+	if (res < 0)
+		return res;
+
+	tm->tm_mday = value >> 8;
+	tm->tm_hour = value & 0xff;
+
+	res = regmap_read(rtc->ec->regmap, NTXEC_REG_READ_YEAR_MONTH, &value);
+	if (res < 0)
+		return res;
+
+	tm->tm_year = (value >> 8) + 100;
+	tm->tm_mon = (value & 0xff) - 1;
+
+	/*
+	 * Read the minutes/seconds field again. If it changed since the first
+	 * read, we can't assume that the values read so far are consistent,
+	 * and should start from the beginning.
+	 */
+	res = regmap_read(rtc->ec->regmap, NTXEC_REG_READ_MINUTE_SECOND, &value);
+	if (res < 0)
+		return res;
+
+	if (tm->tm_min != value >> 8 || tm->tm_sec != (value & 0xff))
+		goto retry;
+
+	return 0;
+}
+
+static int ntxec_set_time(struct device *dev, struct rtc_time *tm)
+{
+	struct ntxec_rtc *rtc = dev_get_drvdata(dev);
+
+	/*
+	 * To avoid time overflows while we're writing the full date/time,
+	 * set the seconds field to zero before doing anything else. For the
+	 * next 59 seconds (plus however long it takes until the RTC's next
+	 * update of the second field), the seconds field will not overflow
+	 * into the other fields.
+	 */
+	struct reg_sequence regs[] = {
+		{ NTXEC_REG_WRITE_SECOND, ntxec_reg8(0) },
+		{ NTXEC_REG_WRITE_YEAR, ntxec_reg8(tm->tm_year - 100) },
+		{ NTXEC_REG_WRITE_MONTH, ntxec_reg8(tm->tm_mon + 1) },
+		{ NTXEC_REG_WRITE_DAY, ntxec_reg8(tm->tm_mday) },
+		{ NTXEC_REG_WRITE_HOUR, ntxec_reg8(tm->tm_hour) },
+		{ NTXEC_REG_WRITE_MINUTE, ntxec_reg8(tm->tm_min) },
+		{ NTXEC_REG_WRITE_SECOND, ntxec_reg8(tm->tm_sec) },
+	};
+
+	return regmap_multi_reg_write(rtc->ec->regmap, regs, ARRAY_SIZE(regs));
+}
+
+static const struct rtc_class_ops ntxec_rtc_ops = {
+	.read_time = ntxec_read_time,
+	.set_time = ntxec_set_time,
+};
+
+static int ntxec_rtc_probe(struct platform_device *pdev)
+{
+	struct rtc_device *dev;
+	struct ntxec_rtc *rtc;
+
+	pdev->dev.of_node = pdev->dev.parent->of_node;
+
+	rtc = devm_kzalloc(&pdev->dev, sizeof(*rtc), GFP_KERNEL);
+	if (!rtc)
+		return -ENOMEM;
+
+	rtc->dev = &pdev->dev;
+	rtc->ec = dev_get_drvdata(pdev->dev.parent);
+	platform_set_drvdata(pdev, rtc);
+
+	dev = devm_rtc_allocate_device(&pdev->dev);
+	if (IS_ERR(dev))
+		return PTR_ERR(dev);
+
+	dev->ops = &ntxec_rtc_ops;
+	dev->range_min = RTC_TIMESTAMP_BEGIN_2000;
+	dev->range_max = 9025257599LL; /* 2255-12-31 23:59:59 */
+
+	return devm_rtc_register_device(dev);
+}
+
+static struct platform_driver ntxec_rtc_driver = {
+	.driver = {
+		.name = "ntxec-rtc",
+	},
+	.probe = ntxec_rtc_probe,
+};
+module_platform_driver(ntxec_rtc_driver);
+
+MODULE_AUTHOR("Jonathan Neuschäfer <j.neuschaefer@gmx.net>");
+MODULE_DESCRIPTION("RTC driver for Netronix EC");
+MODULE_LICENSE("GPL");
+MODULE_ALIAS("platform:ntxec-rtc");
--
2.29.2


WARNING: multiple messages have this Message-ID (diff)
From: "Jonathan Neuschäfer" <j.neuschaefer@gmx.net>
To: linux-kernel@vger.kernel.org
Cc: "Alexandre Belloni" <alexandre.belloni@bootlin.com>,
	"Heiko Stuebner" <heiko@sntech.de>,
	linux-pwm@vger.kernel.org,
	"Linus Walleij" <linus.walleij@linaro.org>,
	"Thierry Reding" <thierry.reding@gmail.com>,
	"Fabio Estevam" <festevam@gmail.com>,
	linux-rtc@vger.kernel.org, "Arnd Bergmann" <arnd@arndb.de>,
	"Mauro Carvalho Chehab" <mchehab+huawei@kernel.org>,
	"Sam Ravnborg" <sam@ravnborg.org>,
	"Daniel Palmer" <daniel@0x0f.com>,
	"Andy Shevchenko" <andy.shevchenko@gmail.com>,
	"Andreas Kemnade" <andreas@kemnade.info>,
	"NXP Linux Team" <linux-imx@nxp.com>,
	"Uwe Kleine-König" <u.kleine-koenig@pengutronix.de>,
	devicetree@vger.kernel.org,
	"Stephan Gerhold" <stephan@gerhold.net>,
	allen <allen.chen@ite.com.tw>,
	"Sascha Hauer" <s.hauer@pengutronix.de>,
	"Jonathan Neuschäfer" <j.neuschaefer@gmx.net>,
	"Lubomir Rintel" <lkundrak@v3.sk>,
	"Rob Herring" <robh+dt@kernel.org>,
	"Lee Jones" <lee.jones@linaro.org>,
	linux-arm-kernel@lists.infradead.org,
	"Alessandro Zummo" <a.zummo@towertech.it>,
	"Mark Brown" <broonie@kernel.org>,
	"Pengutronix Kernel Team" <kernel@pengutronix.de>,
	"Heiko Stuebner" <heiko.stuebner@theobroma-systems.com>,
	"Josua Mayer" <josua.mayer@jm0.eu>,
	"Shawn Guo" <shawnguo@kernel.org>,
	"David S. Miller" <davem@davemloft.net>
Subject: [PATCH v9 5/7] rtc: New driver for RTC in Netronix embedded controller
Date: Sun, 24 Jan 2021 22:41:25 +0100	[thread overview]
Message-ID: <20210124214127.3631530-6-j.neuschaefer@gmx.net> (raw)
In-Reply-To: <20210124214127.3631530-1-j.neuschaefer@gmx.net>

With this driver, mainline Linux can keep its time and date in sync with
the vendor kernel.

Advanced functionality like alarm and automatic power-on is not yet
supported.

Signed-off-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net>
Acked-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
---
v9:
- no changes

v8:
- https://lore.kernel.org/lkml/20210116194826.3866540-6-j.neuschaefer@gmx.net/
- Copy dev.of_node from parent device

v7:
- Adjust to recent RTC API change (rtc_register_device -> devm_rtc_register_device)

v6:
- no changes

v5:
- Add Alexandre Belloni's A-b
- Use regmap_multi_reg_write

v4:
- Remove "driver" from Kconfig entry for consistency with most other entries
- Add missing MODULE_ALIAS line
- Give NTXEC_REG_READ_ macros longer names
- Solve the read tearing issue using Alexandre Belloni's algorithm
- Solve the write tearing issue using Uwe Kleine-König's algorithm
- Spell out ODM

v3:
- Add email address to copyright line
- Remove OF compatible string and don't include linux/of_device.h
- Don't use a comma after sentinels
- Avoid ret |= ... pattern
- Move 8-bit register conversion to ntxec.h
- Relicense as GPLv2 or later

v2:
- Rework top-of-file comment [Lee Jones]
- Sort the #include lines [Alexandre Belloni]
- don't align = signs in struct initializers [Uwe Kleine-König]
- Switch to regmap
- Fix register number used to read minutes and seconds
- Prefix registers with NTXEC_REG_
- Add help text to the Kconfig option
- Use devm_rtc_allocate_device and rtc_register_device, set ->range_min and ->range_max
---
 drivers/rtc/Kconfig     |   8 +++
 drivers/rtc/Makefile    |   1 +
 drivers/rtc/rtc-ntxec.c | 145 ++++++++++++++++++++++++++++++++++++++++
 3 files changed, 154 insertions(+)
 create mode 100644 drivers/rtc/rtc-ntxec.c

diff --git a/drivers/rtc/Kconfig b/drivers/rtc/Kconfig
index 6123f9f4fbc90..d49cf387add14 100644
--- a/drivers/rtc/Kconfig
+++ b/drivers/rtc/Kconfig
@@ -1315,6 +1315,14 @@ config RTC_DRV_CROS_EC
 	  This driver can also be built as a module. If so, the module
 	  will be called rtc-cros-ec.

+config RTC_DRV_NTXEC
+	tristate "Netronix embedded controller RTC"
+	depends on MFD_NTXEC
+	help
+	  Say yes here if you want to support the RTC functionality of the
+	  embedded controller found in certain e-book readers designed by the
+	  original design manufacturer Netronix.
+
 comment "on-CPU RTC drivers"

 config RTC_DRV_ASM9260
diff --git a/drivers/rtc/Makefile b/drivers/rtc/Makefile
index bb8f319b09fbf..92c26eafe70ce 100644
--- a/drivers/rtc/Makefile
+++ b/drivers/rtc/Makefile
@@ -110,6 +110,7 @@ obj-$(CONFIG_RTC_DRV_MT7622)	+= rtc-mt7622.o
 obj-$(CONFIG_RTC_DRV_MV)	+= rtc-mv.o
 obj-$(CONFIG_RTC_DRV_MXC)	+= rtc-mxc.o
 obj-$(CONFIG_RTC_DRV_MXC_V2)	+= rtc-mxc_v2.o
+obj-$(CONFIG_RTC_DRV_NTXEC)	+= rtc-ntxec.o
 obj-$(CONFIG_RTC_DRV_OMAP)	+= rtc-omap.o
 obj-$(CONFIG_RTC_DRV_OPAL)	+= rtc-opal.o
 obj-$(CONFIG_RTC_DRV_PALMAS)	+= rtc-palmas.o
diff --git a/drivers/rtc/rtc-ntxec.c b/drivers/rtc/rtc-ntxec.c
new file mode 100644
index 0000000000000..850ca49186fdc
--- /dev/null
+++ b/drivers/rtc/rtc-ntxec.c
@@ -0,0 +1,145 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * The Netronix embedded controller is a microcontroller found in some
+ * e-book readers designed by the original design manufacturer Netronix, Inc.
+ * It contains RTC, battery monitoring, system power management, and PWM
+ * functionality.
+ *
+ * This driver implements access to the RTC time and date.
+ *
+ * Copyright 2020 Jonathan Neuschäfer <j.neuschaefer@gmx.net>
+ */
+
+#include <linux/mfd/ntxec.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/regmap.h>
+#include <linux/rtc.h>
+#include <linux/types.h>
+
+struct ntxec_rtc {
+	struct device *dev;
+	struct ntxec *ec;
+};
+
+#define NTXEC_REG_WRITE_YEAR	0x10
+#define NTXEC_REG_WRITE_MONTH	0x11
+#define NTXEC_REG_WRITE_DAY	0x12
+#define NTXEC_REG_WRITE_HOUR	0x13
+#define NTXEC_REG_WRITE_MINUTE	0x14
+#define NTXEC_REG_WRITE_SECOND	0x15
+
+#define NTXEC_REG_READ_YEAR_MONTH	0x20
+#define NTXEC_REG_READ_MDAY_HOUR	0x21
+#define NTXEC_REG_READ_MINUTE_SECOND	0x23
+
+static int ntxec_read_time(struct device *dev, struct rtc_time *tm)
+{
+	struct ntxec_rtc *rtc = dev_get_drvdata(dev);
+	unsigned int value;
+	int res;
+
+retry:
+	res = regmap_read(rtc->ec->regmap, NTXEC_REG_READ_MINUTE_SECOND, &value);
+	if (res < 0)
+		return res;
+
+	tm->tm_min = value >> 8;
+	tm->tm_sec = value & 0xff;
+
+	res = regmap_read(rtc->ec->regmap, NTXEC_REG_READ_MDAY_HOUR, &value);
+	if (res < 0)
+		return res;
+
+	tm->tm_mday = value >> 8;
+	tm->tm_hour = value & 0xff;
+
+	res = regmap_read(rtc->ec->regmap, NTXEC_REG_READ_YEAR_MONTH, &value);
+	if (res < 0)
+		return res;
+
+	tm->tm_year = (value >> 8) + 100;
+	tm->tm_mon = (value & 0xff) - 1;
+
+	/*
+	 * Read the minutes/seconds field again. If it changed since the first
+	 * read, we can't assume that the values read so far are consistent,
+	 * and should start from the beginning.
+	 */
+	res = regmap_read(rtc->ec->regmap, NTXEC_REG_READ_MINUTE_SECOND, &value);
+	if (res < 0)
+		return res;
+
+	if (tm->tm_min != value >> 8 || tm->tm_sec != (value & 0xff))
+		goto retry;
+
+	return 0;
+}
+
+static int ntxec_set_time(struct device *dev, struct rtc_time *tm)
+{
+	struct ntxec_rtc *rtc = dev_get_drvdata(dev);
+
+	/*
+	 * To avoid time overflows while we're writing the full date/time,
+	 * set the seconds field to zero before doing anything else. For the
+	 * next 59 seconds (plus however long it takes until the RTC's next
+	 * update of the second field), the seconds field will not overflow
+	 * into the other fields.
+	 */
+	struct reg_sequence regs[] = {
+		{ NTXEC_REG_WRITE_SECOND, ntxec_reg8(0) },
+		{ NTXEC_REG_WRITE_YEAR, ntxec_reg8(tm->tm_year - 100) },
+		{ NTXEC_REG_WRITE_MONTH, ntxec_reg8(tm->tm_mon + 1) },
+		{ NTXEC_REG_WRITE_DAY, ntxec_reg8(tm->tm_mday) },
+		{ NTXEC_REG_WRITE_HOUR, ntxec_reg8(tm->tm_hour) },
+		{ NTXEC_REG_WRITE_MINUTE, ntxec_reg8(tm->tm_min) },
+		{ NTXEC_REG_WRITE_SECOND, ntxec_reg8(tm->tm_sec) },
+	};
+
+	return regmap_multi_reg_write(rtc->ec->regmap, regs, ARRAY_SIZE(regs));
+}
+
+static const struct rtc_class_ops ntxec_rtc_ops = {
+	.read_time = ntxec_read_time,
+	.set_time = ntxec_set_time,
+};
+
+static int ntxec_rtc_probe(struct platform_device *pdev)
+{
+	struct rtc_device *dev;
+	struct ntxec_rtc *rtc;
+
+	pdev->dev.of_node = pdev->dev.parent->of_node;
+
+	rtc = devm_kzalloc(&pdev->dev, sizeof(*rtc), GFP_KERNEL);
+	if (!rtc)
+		return -ENOMEM;
+
+	rtc->dev = &pdev->dev;
+	rtc->ec = dev_get_drvdata(pdev->dev.parent);
+	platform_set_drvdata(pdev, rtc);
+
+	dev = devm_rtc_allocate_device(&pdev->dev);
+	if (IS_ERR(dev))
+		return PTR_ERR(dev);
+
+	dev->ops = &ntxec_rtc_ops;
+	dev->range_min = RTC_TIMESTAMP_BEGIN_2000;
+	dev->range_max = 9025257599LL; /* 2255-12-31 23:59:59 */
+
+	return devm_rtc_register_device(dev);
+}
+
+static struct platform_driver ntxec_rtc_driver = {
+	.driver = {
+		.name = "ntxec-rtc",
+	},
+	.probe = ntxec_rtc_probe,
+};
+module_platform_driver(ntxec_rtc_driver);
+
+MODULE_AUTHOR("Jonathan Neuschäfer <j.neuschaefer@gmx.net>");
+MODULE_DESCRIPTION("RTC driver for Netronix EC");
+MODULE_LICENSE("GPL");
+MODULE_ALIAS("platform:ntxec-rtc");
--
2.29.2


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

  parent reply	other threads:[~2021-01-24 22:46 UTC|newest]

Thread overview: 39+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2021-01-24 21:41 [PATCH v9 0/7] Netronix embedded controller driver for Kobo and Tolino ebook readers Jonathan Neuschäfer
2021-01-24 21:41 ` Jonathan Neuschäfer
2021-01-24 21:41 ` [PATCH v9 1/7] dt-bindings: Add vendor prefix for Netronix, Inc Jonathan Neuschäfer
2021-01-24 21:41   ` Jonathan Neuschäfer
2021-01-24 21:41 ` [PATCH v9 2/7] dt-bindings: mfd: Add binding for Netronix embedded controller Jonathan Neuschäfer
2021-01-24 21:41   ` Jonathan Neuschäfer
2021-01-24 21:41 ` [PATCH v9 3/7] mfd: Add base driver " Jonathan Neuschäfer
2021-01-24 21:41   ` Jonathan Neuschäfer
2021-01-24 21:41 ` [PATCH v9 4/7] pwm: ntxec: Add driver for PWM function in Netronix EC Jonathan Neuschäfer
2021-01-24 21:41   ` Jonathan Neuschäfer
2021-01-24 21:41 ` Jonathan Neuschäfer [this message]
2021-01-24 21:41   ` [PATCH v9 5/7] rtc: New driver for RTC in Netronix embedded controller Jonathan Neuschäfer
2021-01-24 21:41 ` [PATCH v9 6/7] MAINTAINERS: Add entry for " Jonathan Neuschäfer
2021-01-24 21:41   ` Jonathan Neuschäfer
2021-01-24 21:41 ` [PATCH v9 7/7] ARM: dts: imx50-kobo-aura: Add " Jonathan Neuschäfer
2021-01-24 21:41   ` Jonathan Neuschäfer
2021-01-25 19:08   ` [PATCH] ARM: dts: imx6sl-tolino-shine2hd: " Andreas Kemnade
2021-01-25 19:08     ` Andreas Kemnade
2021-01-25 20:26     ` Jonathan Neuschäfer
2021-03-03  7:59     ` Shawn Guo
2021-03-03  7:59       ` Shawn Guo
2021-03-03  7:59   ` [PATCH v9 7/7] ARM: dts: imx50-kobo-aura: " Shawn Guo
2021-03-03  7:59     ` Shawn Guo
2021-02-08 21:56 ` [PATCH v9 0/7] Netronix embedded controller driver for Kobo and Tolino ebook readers Andreas Kemnade
2021-02-08 21:56   ` Andreas Kemnade
2021-02-09 14:11   ` Lee Jones
2021-02-09 14:11     ` Lee Jones
2021-03-01 10:28 ` [GIT PULL] Immutable branch between MFD, PWM and RTC due for the v5.13 merge window Lee Jones
2021-03-01 10:28   ` Lee Jones
2021-03-09 20:05   ` Lee Jones
2021-03-09 20:05     ` Lee Jones
2021-03-10 11:08     ` Lee Jones
2021-03-10 11:08       ` Lee Jones
2021-03-10 11:39     ` Uwe Kleine-König
2021-03-10 11:39       ` Uwe Kleine-König
2021-03-10 11:54       ` Alexandre Belloni
2021-03-10 11:54         ` Alexandre Belloni
2021-03-12 18:42         ` Mark Brown
2021-03-12 18:42           ` Mark Brown

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20210124214127.3631530-6-j.neuschaefer@gmx.net \
    --to=j.neuschaefer@gmx.net \
    --cc=a.zummo@towertech.it \
    --cc=alexandre.belloni@bootlin.com \
    --cc=allen.chen@ite.com.tw \
    --cc=andreas@kemnade.info \
    --cc=andy.shevchenko@gmail.com \
    --cc=arnd@arndb.de \
    --cc=broonie@kernel.org \
    --cc=daniel@0x0f.com \
    --cc=davem@davemloft.net \
    --cc=devicetree@vger.kernel.org \
    --cc=festevam@gmail.com \
    --cc=heiko.stuebner@theobroma-systems.com \
    --cc=heiko@sntech.de \
    --cc=josua.mayer@jm0.eu \
    --cc=kernel@pengutronix.de \
    --cc=lee.jones@linaro.org \
    --cc=linus.walleij@linaro.org \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-imx@nxp.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-pwm@vger.kernel.org \
    --cc=linux-rtc@vger.kernel.org \
    --cc=lkundrak@v3.sk \
    --cc=mchehab+huawei@kernel.org \
    --cc=robh+dt@kernel.org \
    --cc=s.hauer@pengutronix.de \
    --cc=sam@ravnborg.org \
    --cc=shawnguo@kernel.org \
    --cc=stephan@gerhold.net \
    --cc=thierry.reding@gmail.com \
    --cc=u.kleine-koenig@pengutronix.de \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.