[PATCH v10 0/4] drm/panfrost: Add support for mt8183 GPU

[PATCH v10 0/4] drm/panfrost: Add support for mt8183 GPU

[Nicolas Boichat]

Hi!

Follow-up on the v5 [1], things have gotten significantly
better in the last 9 months, thanks to the efforts on Bifrost
support by the Collabora team (and probably others I'm not
aware of).

I've been testing this series on a MT8183/kukui device, with a
chromeos-5.10 kernel [2], and got basic Chromium OS UI up with
mesa 20.3.2 (lots of artifacts though).

devfreq is currently not supported, as we'll need:
 - Clock core support for switching the GPU core clock (see 2/4).
 - Platform-specific handling of the 2-regulator (see 3/4).

Since the latter is easy to detect, patch 3/4 just disables
devfreq if the more than one regulator is specified in the
compatible matching table.

[1] https://patchwork.kernel.org/project/linux-mediatek/cover/20200306041345.259332-1-drinkcat@chromium.org/
[2] https://crrev.com/c/2608070

Changes in v10:
 - Fix the binding to make sure sram-supply property can be provided.

Changes in v9:
 - Explain why devfreq needs to be disabled for GPUs with >1
   regulators.

Changes in v8:
 - Use DRM_DEV_INFO instead of ERROR

Changes in v7:
 - Fix GPU ID in commit message
 - Fix GPU ID in commit message

Changes in v6:
 - Rebased, actually tested with recent mesa driver.

Nicolas Boichat (4):
  dt-bindings: gpu: mali-bifrost: Add Mediatek MT8183
  arm64: dts: mt8183: Add node for the Mali GPU
  drm/panfrost: devfreq: Disable devfreq when num_supplies > 1
  drm/panfrost: Add mt8183-mali compatible string

 .../bindings/gpu/arm,mali-bifrost.yaml        |  28 +++++
 arch/arm64/boot/dts/mediatek/mt8183-evb.dts   |   6 +
 .../arm64/boot/dts/mediatek/mt8183-kukui.dtsi |   6 +
 arch/arm64/boot/dts/mediatek/mt8183.dtsi      | 105 ++++++++++++++++++
 drivers/gpu/drm/panfrost/panfrost_devfreq.c   |   9 ++
 drivers/gpu/drm/panfrost/panfrost_drv.c       |  10 ++
 6 files changed, 164 insertions(+)

-- 
2.30.0.284.gd98b1dd5eaa7-goog

[PATCH v10 0/4] drm/panfrost: Add support for mt8183 GPU

[Nicolas Boichat]

Hi!

Follow-up on the v5 [1], things have gotten significantly
better in the last 9 months, thanks to the efforts on Bifrost
support by the Collabora team (and probably others I'm not
aware of).

I've been testing this series on a MT8183/kukui device, with a
chromeos-5.10 kernel [2], and got basic Chromium OS UI up with
mesa 20.3.2 (lots of artifacts though).

devfreq is currently not supported, as we'll need:
 - Clock core support for switching the GPU core clock (see 2/4).
 - Platform-specific handling of the 2-regulator (see 3/4).

Since the latter is easy to detect, patch 3/4 just disables
devfreq if the more than one regulator is specified in the
compatible matching table.

[1] https://patchwork.kernel.org/project/linux-mediatek/cover/20200306041345.259332-1-drinkcat@chromium.org/
[2] https://crrev.com/c/2608070

Changes in v10:
 - Fix the binding to make sure sram-supply property can be provided.

Changes in v9:
 - Explain why devfreq needs to be disabled for GPUs with >1
   regulators.

Changes in v8:
 - Use DRM_DEV_INFO instead of ERROR

Changes in v7:
 - Fix GPU ID in commit message
 - Fix GPU ID in commit message

Changes in v6:
 - Rebased, actually tested with recent mesa driver.

Nicolas Boichat (4):
  dt-bindings: gpu: mali-bifrost: Add Mediatek MT8183
  arm64: dts: mt8183: Add node for the Mali GPU
  drm/panfrost: devfreq: Disable devfreq when num_supplies > 1
  drm/panfrost: Add mt8183-mali compatible string

 .../bindings/gpu/arm,mali-bifrost.yaml        |  28 +++++
 arch/arm64/boot/dts/mediatek/mt8183-evb.dts   |   6 +
 .../arm64/boot/dts/mediatek/mt8183-kukui.dtsi |   6 +
 arch/arm64/boot/dts/mediatek/mt8183.dtsi      | 105 ++++++++++++++++++
 drivers/gpu/drm/panfrost/panfrost_devfreq.c   |   9 ++
 drivers/gpu/drm/panfrost/panfrost_drv.c       |  10 ++
 6 files changed, 164 insertions(+)

-- 
2.30.0.284.gd98b1dd5eaa7-goog

_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel

[PATCH v10 0/4] drm/panfrost: Add support for mt8183 GPU

[Nicolas Boichat]

Hi!

Follow-up on the v5 [1], things have gotten significantly
better in the last 9 months, thanks to the efforts on Bifrost
support by the Collabora team (and probably others I'm not
aware of).

I've been testing this series on a MT8183/kukui device, with a
chromeos-5.10 kernel [2], and got basic Chromium OS UI up with
mesa 20.3.2 (lots of artifacts though).

devfreq is currently not supported, as we'll need:
 - Clock core support for switching the GPU core clock (see 2/4).
 - Platform-specific handling of the 2-regulator (see 3/4).

Since the latter is easy to detect, patch 3/4 just disables
devfreq if the more than one regulator is specified in the
compatible matching table.

[1] https://patchwork.kernel.org/project/linux-mediatek/cover/20200306041345.259332-1-drinkcat@chromium.org/
[2] https://crrev.com/c/2608070

Changes in v10:
 - Fix the binding to make sure sram-supply property can be provided.

Changes in v9:
 - Explain why devfreq needs to be disabled for GPUs with >1
   regulators.

Changes in v8:
 - Use DRM_DEV_INFO instead of ERROR

Changes in v7:
 - Fix GPU ID in commit message
 - Fix GPU ID in commit message

Changes in v6:
 - Rebased, actually tested with recent mesa driver.

Nicolas Boichat (4):
  dt-bindings: gpu: mali-bifrost: Add Mediatek MT8183
  arm64: dts: mt8183: Add node for the Mali GPU
  drm/panfrost: devfreq: Disable devfreq when num_supplies > 1
  drm/panfrost: Add mt8183-mali compatible string

 .../bindings/gpu/arm,mali-bifrost.yaml        |  28 +++++
 arch/arm64/boot/dts/mediatek/mt8183-evb.dts   |   6 +
 .../arm64/boot/dts/mediatek/mt8183-kukui.dtsi |   6 +
 arch/arm64/boot/dts/mediatek/mt8183.dtsi      | 105 ++++++++++++++++++
 drivers/gpu/drm/panfrost/panfrost_devfreq.c   |   9 ++
 drivers/gpu/drm/panfrost/panfrost_drv.c       |  10 ++
 6 files changed, 164 insertions(+)

-- 
2.30.0.284.gd98b1dd5eaa7-goog


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

[PATCH v10 0/4] drm/panfrost: Add support for mt8183 GPU

[Nicolas Boichat]

Hi!

Follow-up on the v5 [1], things have gotten significantly
better in the last 9 months, thanks to the efforts on Bifrost
support by the Collabora team (and probably others I'm not
aware of).

I've been testing this series on a MT8183/kukui device, with a
chromeos-5.10 kernel [2], and got basic Chromium OS UI up with
mesa 20.3.2 (lots of artifacts though).

devfreq is currently not supported, as we'll need:
 - Clock core support for switching the GPU core clock (see 2/4).
 - Platform-specific handling of the 2-regulator (see 3/4).

Since the latter is easy to detect, patch 3/4 just disables
devfreq if the more than one regulator is specified in the
compatible matching table.

[1] https://patchwork.kernel.org/project/linux-mediatek/cover/20200306041345.259332-1-drinkcat@chromium.org/
[2] https://crrev.com/c/2608070

Changes in v10:
 - Fix the binding to make sure sram-supply property can be provided.

Changes in v9:
 - Explain why devfreq needs to be disabled for GPUs with >1
   regulators.

Changes in v8:
 - Use DRM_DEV_INFO instead of ERROR

Changes in v7:
 - Fix GPU ID in commit message
 - Fix GPU ID in commit message

Changes in v6:
 - Rebased, actually tested with recent mesa driver.

Nicolas Boichat (4):
  dt-bindings: gpu: mali-bifrost: Add Mediatek MT8183
  arm64: dts: mt8183: Add node for the Mali GPU
  drm/panfrost: devfreq: Disable devfreq when num_supplies > 1
  drm/panfrost: Add mt8183-mali compatible string

 .../bindings/gpu/arm,mali-bifrost.yaml        |  28 +++++
 arch/arm64/boot/dts/mediatek/mt8183-evb.dts   |   6 +
 .../arm64/boot/dts/mediatek/mt8183-kukui.dtsi |   6 +
 arch/arm64/boot/dts/mediatek/mt8183.dtsi      | 105 ++++++++++++++++++
 drivers/gpu/drm/panfrost/panfrost_devfreq.c   |   9 ++
 drivers/gpu/drm/panfrost/panfrost_drv.c       |  10 ++
 6 files changed, 164 insertions(+)

-- 
2.30.0.284.gd98b1dd5eaa7-goog


_______________________________________________
Linux-mediatek mailing list
Linux-mediatek@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-mediatek

[PATCH v10 1/4] dt-bindings: gpu: mali-bifrost: Add Mediatek MT8183

[Nicolas Boichat]

Define a compatible string for the Mali Bifrost GPU found in
Mediatek's MT8183 SoCs.

Signed-off-by: Nicolas Boichat <drinkcat@chromium.org>
---

Changes in v10:
 - Fix the binding to make sure sram-supply property can be provided.

Changes in v6:
 - Rebased, actually tested with recent mesa driver.
 - No change

Changes in v5:
 - Rename "2d" power domain to "core2"

Changes in v4:
 - Add power-domain-names description
   (kept Alyssa's reviewed-by as the change is minor)

Changes in v3:
 - No change

 .../bindings/gpu/arm,mali-bifrost.yaml        | 28 +++++++++++++++++++
 1 file changed, 28 insertions(+)

diff --git a/Documentation/devicetree/bindings/gpu/arm,mali-bifrost.yaml b/Documentation/devicetree/bindings/gpu/arm,mali-bifrost.yaml
index 184492162e7e..eac561582063 100644
--- a/Documentation/devicetree/bindings/gpu/arm,mali-bifrost.yaml
+++ b/Documentation/devicetree/bindings/gpu/arm,mali-bifrost.yaml
@@ -17,6 +17,7 @@ properties:
     items:
       - enum:
           - amlogic,meson-g12a-mali
+          - mediatek,mt8183-mali
           - realtek,rtd1619-mali
           - rockchip,px30-mali
       - const: arm,mali-bifrost # Mali Bifrost GPU model/revision is fully discoverable
@@ -41,6 +42,8 @@ properties:
 
   mali-supply: true
 
+  sram-supply: true
+
   operating-points-v2: true
 
   power-domains:
@@ -87,6 +90,31 @@ allOf:
     then:
       required:
         - resets
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: mediatek,mt8183-mali
+    then:
+      properties:
+        power-domains:
+          description:
+            List of phandle and PM domain specifier as documented in
+            Documentation/devicetree/bindings/power/power_domain.txt
+          minItems: 3
+          maxItems: 3
+        power-domain-names:
+          items:
+            - const: core0
+            - const: core1
+            - const: core2
+      required:
+        - sram-supply
+        - power-domains
+        - power-domains-names
+    else:
+      properties:
+        sram-supply: false
 
 examples:
   - |
-- 
2.30.0.284.gd98b1dd5eaa7-goog

[PATCH v10 1/4] dt-bindings: gpu: mali-bifrost: Add Mediatek MT8183

[Nicolas Boichat]

Define a compatible string for the Mali Bifrost GPU found in
Mediatek's MT8183 SoCs.

Signed-off-by: Nicolas Boichat <drinkcat@chromium.org>
---

Changes in v10:
 - Fix the binding to make sure sram-supply property can be provided.

Changes in v6:
 - Rebased, actually tested with recent mesa driver.
 - No change

Changes in v5:
 - Rename "2d" power domain to "core2"

Changes in v4:
 - Add power-domain-names description
   (kept Alyssa's reviewed-by as the change is minor)

Changes in v3:
 - No change

 .../bindings/gpu/arm,mali-bifrost.yaml        | 28 +++++++++++++++++++
 1 file changed, 28 insertions(+)

diff --git a/Documentation/devicetree/bindings/gpu/arm,mali-bifrost.yaml b/Documentation/devicetree/bindings/gpu/arm,mali-bifrost.yaml
index 184492162e7e..eac561582063 100644
--- a/Documentation/devicetree/bindings/gpu/arm,mali-bifrost.yaml
+++ b/Documentation/devicetree/bindings/gpu/arm,mali-bifrost.yaml
@@ -17,6 +17,7 @@ properties:
     items:
       - enum:
           - amlogic,meson-g12a-mali
+          - mediatek,mt8183-mali
           - realtek,rtd1619-mali
           - rockchip,px30-mali
       - const: arm,mali-bifrost # Mali Bifrost GPU model/revision is fully discoverable
@@ -41,6 +42,8 @@ properties:
 
   mali-supply: true
 
+  sram-supply: true
+
   operating-points-v2: true
 
   power-domains:
@@ -87,6 +90,31 @@ allOf:
     then:
       required:
         - resets
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: mediatek,mt8183-mali
+    then:
+      properties:
+        power-domains:
+          description:
+            List of phandle and PM domain specifier as documented in
+            Documentation/devicetree/bindings/power/power_domain.txt
+          minItems: 3
+          maxItems: 3
+        power-domain-names:
+          items:
+            - const: core0
+            - const: core1
+            - const: core2
+      required:
+        - sram-supply
+        - power-domains
+        - power-domains-names
+    else:
+      properties:
+        sram-supply: false
 
 examples:
   - |
-- 
2.30.0.284.gd98b1dd5eaa7-goog

_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel

[PATCH v10 1/4] dt-bindings: gpu: mali-bifrost: Add Mediatek MT8183

[Nicolas Boichat]

Define a compatible string for the Mali Bifrost GPU found in
Mediatek's MT8183 SoCs.

Signed-off-by: Nicolas Boichat <drinkcat@chromium.org>
---

Changes in v10:
 - Fix the binding to make sure sram-supply property can be provided.

Changes in v6:
 - Rebased, actually tested with recent mesa driver.
 - No change

Changes in v5:
 - Rename "2d" power domain to "core2"

Changes in v4:
 - Add power-domain-names description
   (kept Alyssa's reviewed-by as the change is minor)

Changes in v3:
 - No change

 .../bindings/gpu/arm,mali-bifrost.yaml        | 28 +++++++++++++++++++
 1 file changed, 28 insertions(+)

diff --git a/Documentation/devicetree/bindings/gpu/arm,mali-bifrost.yaml b/Documentation/devicetree/bindings/gpu/arm,mali-bifrost.yaml
index 184492162e7e..eac561582063 100644
--- a/Documentation/devicetree/bindings/gpu/arm,mali-bifrost.yaml
+++ b/Documentation/devicetree/bindings/gpu/arm,mali-bifrost.yaml
@@ -17,6 +17,7 @@ properties:
     items:
       - enum:
           - amlogic,meson-g12a-mali
+          - mediatek,mt8183-mali
           - realtek,rtd1619-mali
           - rockchip,px30-mali
       - const: arm,mali-bifrost # Mali Bifrost GPU model/revision is fully discoverable
@@ -41,6 +42,8 @@ properties:
 
   mali-supply: true
 
+  sram-supply: true
+
   operating-points-v2: true
 
   power-domains:
@@ -87,6 +90,31 @@ allOf:
     then:
       required:
         - resets
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: mediatek,mt8183-mali
+    then:
+      properties:
+        power-domains:
+          description:
+            List of phandle and PM domain specifier as documented in
+            Documentation/devicetree/bindings/power/power_domain.txt
+          minItems: 3
+          maxItems: 3
+        power-domain-names:
+          items:
+            - const: core0
+            - const: core1
+            - const: core2
+      required:
+        - sram-supply
+        - power-domains
+        - power-domains-names
+    else:
+      properties:
+        sram-supply: false
 
 examples:
   - |
-- 
2.30.0.284.gd98b1dd5eaa7-goog


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

[PATCH v10 1/4] dt-bindings: gpu: mali-bifrost: Add Mediatek MT8183

[Nicolas Boichat]

Define a compatible string for the Mali Bifrost GPU found in
Mediatek's MT8183 SoCs.

Signed-off-by: Nicolas Boichat <drinkcat@chromium.org>
---

Changes in v10:
 - Fix the binding to make sure sram-supply property can be provided.

Changes in v6:
 - Rebased, actually tested with recent mesa driver.
 - No change

Changes in v5:
 - Rename "2d" power domain to "core2"

Changes in v4:
 - Add power-domain-names description
   (kept Alyssa's reviewed-by as the change is minor)

Changes in v3:
 - No change

 .../bindings/gpu/arm,mali-bifrost.yaml        | 28 +++++++++++++++++++
 1 file changed, 28 insertions(+)

diff --git a/Documentation/devicetree/bindings/gpu/arm,mali-bifrost.yaml b/Documentation/devicetree/bindings/gpu/arm,mali-bifrost.yaml
index 184492162e7e..eac561582063 100644
--- a/Documentation/devicetree/bindings/gpu/arm,mali-bifrost.yaml
+++ b/Documentation/devicetree/bindings/gpu/arm,mali-bifrost.yaml
@@ -17,6 +17,7 @@ properties:
     items:
       - enum:
           - amlogic,meson-g12a-mali
+          - mediatek,mt8183-mali
           - realtek,rtd1619-mali
           - rockchip,px30-mali
       - const: arm,mali-bifrost # Mali Bifrost GPU model/revision is fully discoverable
@@ -41,6 +42,8 @@ properties:
 
   mali-supply: true
 
+  sram-supply: true
+
   operating-points-v2: true
 
   power-domains:
@@ -87,6 +90,31 @@ allOf:
     then:
       required:
         - resets
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: mediatek,mt8183-mali
+    then:
+      properties:
+        power-domains:
+          description:
+            List of phandle and PM domain specifier as documented in
+            Documentation/devicetree/bindings/power/power_domain.txt
+          minItems: 3
+          maxItems: 3
+        power-domain-names:
+          items:
+            - const: core0
+            - const: core1
+            - const: core2
+      required:
+        - sram-supply
+        - power-domains
+        - power-domains-names
+    else:
+      properties:
+        sram-supply: false
 
 examples:
   - |
-- 
2.30.0.284.gd98b1dd5eaa7-goog


_______________________________________________
Linux-mediatek mailing list
Linux-mediatek@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-mediatek

Re: [PATCH v10 1/4] dt-bindings: gpu: mali-bifrost: Add Mediatek MT8183

[Rob Herring]

On Wed, 13 Jan 2021 14:07:00 +0800, Nicolas Boichat wrote:
> Define a compatible string for the Mali Bifrost GPU found in
> Mediatek's MT8183 SoCs.
> 
> Signed-off-by: Nicolas Boichat <drinkcat@chromium.org>
> ---
> 
> Changes in v10:
>  - Fix the binding to make sure sram-supply property can be provided.
> 
> Changes in v6:
>  - Rebased, actually tested with recent mesa driver.
>  - No change
> 
> Changes in v5:
>  - Rename "2d" power domain to "core2"
> 
> Changes in v4:
>  - Add power-domain-names description
>    (kept Alyssa's reviewed-by as the change is minor)
> 
> Changes in v3:
>  - No change
> 
>  .../bindings/gpu/arm,mali-bifrost.yaml        | 28 +++++++++++++++++++
>  1 file changed, 28 insertions(+)
> 

Reviewed-by: Rob Herring <robh@kernel.org>

Re: [PATCH v10 1/4] dt-bindings: gpu: mali-bifrost: Add Mediatek MT8183

[Rob Herring]

On Wed, 13 Jan 2021 14:07:00 +0800, Nicolas Boichat wrote:
> Define a compatible string for the Mali Bifrost GPU found in
> Mediatek's MT8183 SoCs.
> 
> Signed-off-by: Nicolas Boichat <drinkcat@chromium.org>
> ---
> 
> Changes in v10:
>  - Fix the binding to make sure sram-supply property can be provided.
> 
> Changes in v6:
>  - Rebased, actually tested with recent mesa driver.
>  - No change
> 
> Changes in v5:
>  - Rename "2d" power domain to "core2"
> 
> Changes in v4:
>  - Add power-domain-names description
>    (kept Alyssa's reviewed-by as the change is minor)
> 
> Changes in v3:
>  - No change
> 
>  .../bindings/gpu/arm,mali-bifrost.yaml        | 28 +++++++++++++++++++
>  1 file changed, 28 insertions(+)
> 

Reviewed-by: Rob Herring <robh@kernel.org>
_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel

Re: [PATCH v10 1/4] dt-bindings: gpu: mali-bifrost: Add Mediatek MT8183

[Rob Herring]

On Wed, 13 Jan 2021 14:07:00 +0800, Nicolas Boichat wrote:
> Define a compatible string for the Mali Bifrost GPU found in
> Mediatek's MT8183 SoCs.
> 
> Signed-off-by: Nicolas Boichat <drinkcat@chromium.org>
> ---
> 
> Changes in v10:
>  - Fix the binding to make sure sram-supply property can be provided.
> 
> Changes in v6:
>  - Rebased, actually tested with recent mesa driver.
>  - No change
> 
> Changes in v5:
>  - Rename "2d" power domain to "core2"
> 
> Changes in v4:
>  - Add power-domain-names description
>    (kept Alyssa's reviewed-by as the change is minor)
> 
> Changes in v3:
>  - No change
> 
>  .../bindings/gpu/arm,mali-bifrost.yaml        | 28 +++++++++++++++++++
>  1 file changed, 28 insertions(+)
> 

Reviewed-by: Rob Herring <robh@kernel.org>

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

Re: [PATCH v10 1/4] dt-bindings: gpu: mali-bifrost: Add Mediatek MT8183

[Rob Herring]

On Wed, 13 Jan 2021 14:07:00 +0800, Nicolas Boichat wrote:
> Define a compatible string for the Mali Bifrost GPU found in
> Mediatek's MT8183 SoCs.
> 
> Signed-off-by: Nicolas Boichat <drinkcat@chromium.org>
> ---
> 
> Changes in v10:
>  - Fix the binding to make sure sram-supply property can be provided.
> 
> Changes in v6:
>  - Rebased, actually tested with recent mesa driver.
>  - No change
> 
> Changes in v5:
>  - Rename "2d" power domain to "core2"
> 
> Changes in v4:
>  - Add power-domain-names description
>    (kept Alyssa's reviewed-by as the change is minor)
> 
> Changes in v3:
>  - No change
> 
>  .../bindings/gpu/arm,mali-bifrost.yaml        | 28 +++++++++++++++++++
>  1 file changed, 28 insertions(+)
> 

Reviewed-by: Rob Herring <robh@kernel.org>

_______________________________________________
Linux-mediatek mailing list
Linux-mediatek@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-mediatek

[PATCH v10 2/4] arm64: dts: mt8183: Add node for the Mali GPU

[Nicolas Boichat]

Add a basic GPU node for mt8183.

Signed-off-by: Nicolas Boichat <drinkcat@chromium.org>
---
The binding we use with out-of-tree Mali drivers includes more
clocks, this is used for devfreq: the out-of-tree driver switches
clk_mux to clk_sub_parent (26Mhz), adjusts clk_main_parent, then
switches clk_mux back to clk_main_parent:
(see https://chromium.googlesource.com/chromiumos/third_party/kernel/+/chromeos-4.19/drivers/gpu/arm/midgard/platform/mediatek/mali_kbase_runtime_pm.c#423)
clocks =
        <&topckgen CLK_TOP_MFGPLL_CK>,
        <&topckgen CLK_TOP_MUX_MFG>,
        <&clk26m>,
        <&mfgcfg CLK_MFG_BG3D>;
clock-names =
        "clk_main_parent",
        "clk_mux",
        "clk_sub_parent",
        "subsys_mfg_cg";
(based on discussions, this probably belongs in the clock core)

This only matters for devfreq, that is disabled anyway as we don't
have platform-specific code to handle >1 supplies.

(no changes since v6)

Changes in v6:
 - Add gpu regulators to kukui dtsi as well.
 - Power domains are now attached to spm, not scpsys
 - Drop R-B.

Changes in v5:
 - Rename "2d" power domain to "core2" (keep R-B again).

Changes in v4:
 - Add power-domain-names to describe the 3 domains.
   (kept Alyssa's reviewed-by as the change is minor)

Changes in v3:
 - No changes

Changes in v2:
 - Use sram instead of mali_sram as SRAM supply name.
 - Rename mali@ to gpu@.

 arch/arm64/boot/dts/mediatek/mt8183-evb.dts   |   6 +
 .../arm64/boot/dts/mediatek/mt8183-kukui.dtsi |   6 +
 arch/arm64/boot/dts/mediatek/mt8183.dtsi      | 105 ++++++++++++++++++
 3 files changed, 117 insertions(+)

diff --git a/arch/arm64/boot/dts/mediatek/mt8183-evb.dts b/arch/arm64/boot/dts/mediatek/mt8183-evb.dts
index cba2d8933e79..0a8c2fad8e16 100644
--- a/arch/arm64/boot/dts/mediatek/mt8183-evb.dts
+++ b/arch/arm64/boot/dts/mediatek/mt8183-evb.dts
@@ -42,6 +42,12 @@ &auxadc {
 	status = "okay";
 };
 
+&gpu {
+	supply-names = "mali", "sram";
+	mali-supply = <&mt6358_vgpu_reg>;
+	sram-supply = <&mt6358_vsram_gpu_reg>;
+};
+
 &i2c0 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&i2c_pins_0>;
diff --git a/arch/arm64/boot/dts/mediatek/mt8183-kukui.dtsi b/arch/arm64/boot/dts/mediatek/mt8183-kukui.dtsi
index bf2ad1294dd3..00d8e112cab9 100644
--- a/arch/arm64/boot/dts/mediatek/mt8183-kukui.dtsi
+++ b/arch/arm64/boot/dts/mediatek/mt8183-kukui.dtsi
@@ -249,6 +249,12 @@ &cpu7 {
 	proc-supply = <&mt6358_vproc11_reg>;
 };
 
+&gpu {
+	supply-names = "mali", "sram";
+	mali-supply = <&mt6358_vgpu_reg>;
+	sram-supply = <&mt6358_vsram_gpu_reg>;
+};
+
 &i2c0 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&i2c0_pins>;
diff --git a/arch/arm64/boot/dts/mediatek/mt8183.dtsi b/arch/arm64/boot/dts/mediatek/mt8183.dtsi
index 5b782a4769e7..5430e05e18a0 100644
--- a/arch/arm64/boot/dts/mediatek/mt8183.dtsi
+++ b/arch/arm64/boot/dts/mediatek/mt8183.dtsi
@@ -964,6 +964,111 @@ mfgcfg: syscon@13000000 {
 			#clock-cells = <1>;
 		};
 
+		gpu: gpu@13040000 {
+			compatible = "mediatek,mt8183-mali", "arm,mali-bifrost";
+			reg = <0 0x13040000 0 0x4000>;
+			interrupts =
+				<GIC_SPI 280 IRQ_TYPE_LEVEL_LOW>,
+				<GIC_SPI 279 IRQ_TYPE_LEVEL_LOW>,
+				<GIC_SPI 278 IRQ_TYPE_LEVEL_LOW>;
+			interrupt-names = "job", "mmu", "gpu";
+
+			clocks = <&topckgen CLK_TOP_MFGPLL_CK>;
+
+			power-domains =
+				<&spm MT8183_POWER_DOMAIN_MFG_CORE0>,
+				<&spm MT8183_POWER_DOMAIN_MFG_CORE1>,
+				<&spm MT8183_POWER_DOMAIN_MFG_2D>;
+			power-domain-names = "core0", "core1", "core2";
+
+			operating-points-v2 = <&gpu_opp_table>;
+		};
+
+		gpu_opp_table: opp_table0 {
+			compatible = "operating-points-v2";
+			opp-shared;
+
+			opp-300000000 {
+				opp-hz = /bits/ 64 <300000000>;
+				opp-microvolt = <625000>, <850000>;
+			};
+
+			opp-320000000 {
+				opp-hz = /bits/ 64 <320000000>;
+				opp-microvolt = <631250>, <850000>;
+			};
+
+			opp-340000000 {
+				opp-hz = /bits/ 64 <340000000>;
+				opp-microvolt = <637500>, <850000>;
+			};
+
+			opp-360000000 {
+				opp-hz = /bits/ 64 <360000000>;
+				opp-microvolt = <643750>, <850000>;
+			};
+
+			opp-380000000 {
+				opp-hz = /bits/ 64 <380000000>;
+				opp-microvolt = <650000>, <850000>;
+			};
+
+			opp-400000000 {
+				opp-hz = /bits/ 64 <400000000>;
+				opp-microvolt = <656250>, <850000>;
+			};
+
+			opp-420000000 {
+				opp-hz = /bits/ 64 <420000000>;
+				opp-microvolt = <662500>, <850000>;
+			};
+
+			opp-460000000 {
+				opp-hz = /bits/ 64 <460000000>;
+				opp-microvolt = <675000>, <850000>;
+			};
+
+			opp-500000000 {
+				opp-hz = /bits/ 64 <500000000>;
+				opp-microvolt = <687500>, <850000>;
+			};
+
+			opp-540000000 {
+				opp-hz = /bits/ 64 <540000000>;
+				opp-microvolt = <700000>, <850000>;
+			};
+
+			opp-580000000 {
+				opp-hz = /bits/ 64 <580000000>;
+				opp-microvolt = <712500>, <850000>;
+			};
+
+			opp-620000000 {
+				opp-hz = /bits/ 64 <620000000>;
+				opp-microvolt = <725000>, <850000>;
+			};
+
+			opp-653000000 {
+				opp-hz = /bits/ 64 <653000000>;
+				opp-microvolt = <743750>, <850000>;
+			};
+
+			opp-698000000 {
+				opp-hz = /bits/ 64 <698000000>;
+				opp-microvolt = <768750>, <868750>;
+			};
+
+			opp-743000000 {
+				opp-hz = /bits/ 64 <743000000>;
+				opp-microvolt = <793750>, <893750>;
+			};
+
+			opp-800000000 {
+				opp-hz = /bits/ 64 <800000000>;
+				opp-microvolt = <825000>, <925000>;
+			};
+		};
+
 		mmsys: syscon@14000000 {
 			compatible = "mediatek,mt8183-mmsys", "syscon";
 			reg = <0 0x14000000 0 0x1000>;
-- 
2.30.0.284.gd98b1dd5eaa7-goog

[PATCH v10 2/4] arm64: dts: mt8183: Add node for the Mali GPU

[Nicolas Boichat]

Add a basic GPU node for mt8183.

Signed-off-by: Nicolas Boichat <drinkcat@chromium.org>
---
The binding we use with out-of-tree Mali drivers includes more
clocks, this is used for devfreq: the out-of-tree driver switches
clk_mux to clk_sub_parent (26Mhz), adjusts clk_main_parent, then
switches clk_mux back to clk_main_parent:
(see https://chromium.googlesource.com/chromiumos/third_party/kernel/+/chromeos-4.19/drivers/gpu/arm/midgard/platform/mediatek/mali_kbase_runtime_pm.c#423)
clocks =
        <&topckgen CLK_TOP_MFGPLL_CK>,
        <&topckgen CLK_TOP_MUX_MFG>,
        <&clk26m>,
        <&mfgcfg CLK_MFG_BG3D>;
clock-names =
        "clk_main_parent",
        "clk_mux",
        "clk_sub_parent",
        "subsys_mfg_cg";
(based on discussions, this probably belongs in the clock core)

This only matters for devfreq, that is disabled anyway as we don't
have platform-specific code to handle >1 supplies.

(no changes since v6)

Changes in v6:
 - Add gpu regulators to kukui dtsi as well.
 - Power domains are now attached to spm, not scpsys
 - Drop R-B.

Changes in v5:
 - Rename "2d" power domain to "core2" (keep R-B again).

Changes in v4:
 - Add power-domain-names to describe the 3 domains.
   (kept Alyssa's reviewed-by as the change is minor)

Changes in v3:
 - No changes

Changes in v2:
 - Use sram instead of mali_sram as SRAM supply name.
 - Rename mali@ to gpu@.

 arch/arm64/boot/dts/mediatek/mt8183-evb.dts   |   6 +
 .../arm64/boot/dts/mediatek/mt8183-kukui.dtsi |   6 +
 arch/arm64/boot/dts/mediatek/mt8183.dtsi      | 105 ++++++++++++++++++
 3 files changed, 117 insertions(+)

diff --git a/arch/arm64/boot/dts/mediatek/mt8183-evb.dts b/arch/arm64/boot/dts/mediatek/mt8183-evb.dts
index cba2d8933e79..0a8c2fad8e16 100644
--- a/arch/arm64/boot/dts/mediatek/mt8183-evb.dts
+++ b/arch/arm64/boot/dts/mediatek/mt8183-evb.dts
@@ -42,6 +42,12 @@ &auxadc {
 	status = "okay";
 };
 
+&gpu {
+	supply-names = "mali", "sram";
+	mali-supply = <&mt6358_vgpu_reg>;
+	sram-supply = <&mt6358_vsram_gpu_reg>;
+};
+
 &i2c0 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&i2c_pins_0>;
diff --git a/arch/arm64/boot/dts/mediatek/mt8183-kukui.dtsi b/arch/arm64/boot/dts/mediatek/mt8183-kukui.dtsi
index bf2ad1294dd3..00d8e112cab9 100644
--- a/arch/arm64/boot/dts/mediatek/mt8183-kukui.dtsi
+++ b/arch/arm64/boot/dts/mediatek/mt8183-kukui.dtsi
@@ -249,6 +249,12 @@ &cpu7 {
 	proc-supply = <&mt6358_vproc11_reg>;
 };
 
+&gpu {
+	supply-names = "mali", "sram";
+	mali-supply = <&mt6358_vgpu_reg>;
+	sram-supply = <&mt6358_vsram_gpu_reg>;
+};
+
 &i2c0 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&i2c0_pins>;
diff --git a/arch/arm64/boot/dts/mediatek/mt8183.dtsi b/arch/arm64/boot/dts/mediatek/mt8183.dtsi
index 5b782a4769e7..5430e05e18a0 100644
--- a/arch/arm64/boot/dts/mediatek/mt8183.dtsi
+++ b/arch/arm64/boot/dts/mediatek/mt8183.dtsi
@@ -964,6 +964,111 @@ mfgcfg: syscon@13000000 {
 			#clock-cells = <1>;
 		};
 
+		gpu: gpu@13040000 {
+			compatible = "mediatek,mt8183-mali", "arm,mali-bifrost";
+			reg = <0 0x13040000 0 0x4000>;
+			interrupts =
+				<GIC_SPI 280 IRQ_TYPE_LEVEL_LOW>,
+				<GIC_SPI 279 IRQ_TYPE_LEVEL_LOW>,
+				<GIC_SPI 278 IRQ_TYPE_LEVEL_LOW>;
+			interrupt-names = "job", "mmu", "gpu";
+
+			clocks = <&topckgen CLK_TOP_MFGPLL_CK>;
+
+			power-domains =
+				<&spm MT8183_POWER_DOMAIN_MFG_CORE0>,
+				<&spm MT8183_POWER_DOMAIN_MFG_CORE1>,
+				<&spm MT8183_POWER_DOMAIN_MFG_2D>;
+			power-domain-names = "core0", "core1", "core2";
+
+			operating-points-v2 = <&gpu_opp_table>;
+		};
+
+		gpu_opp_table: opp_table0 {
+			compatible = "operating-points-v2";
+			opp-shared;
+
+			opp-300000000 {
+				opp-hz = /bits/ 64 <300000000>;
+				opp-microvolt = <625000>, <850000>;
+			};
+
+			opp-320000000 {
+				opp-hz = /bits/ 64 <320000000>;
+				opp-microvolt = <631250>, <850000>;
+			};
+
+			opp-340000000 {
+				opp-hz = /bits/ 64 <340000000>;
+				opp-microvolt = <637500>, <850000>;
+			};
+
+			opp-360000000 {
+				opp-hz = /bits/ 64 <360000000>;
+				opp-microvolt = <643750>, <850000>;
+			};
+
+			opp-380000000 {
+				opp-hz = /bits/ 64 <380000000>;
+				opp-microvolt = <650000>, <850000>;
+			};
+
+			opp-400000000 {
+				opp-hz = /bits/ 64 <400000000>;
+				opp-microvolt = <656250>, <850000>;
+			};
+
+			opp-420000000 {
+				opp-hz = /bits/ 64 <420000000>;
+				opp-microvolt = <662500>, <850000>;
+			};
+
+			opp-460000000 {
+				opp-hz = /bits/ 64 <460000000>;
+				opp-microvolt = <675000>, <850000>;
+			};
+
+			opp-500000000 {
+				opp-hz = /bits/ 64 <500000000>;
+				opp-microvolt = <687500>, <850000>;
+			};
+
+			opp-540000000 {
+				opp-hz = /bits/ 64 <540000000>;
+				opp-microvolt = <700000>, <850000>;
+			};
+
+			opp-580000000 {
+				opp-hz = /bits/ 64 <580000000>;
+				opp-microvolt = <712500>, <850000>;
+			};
+
+			opp-620000000 {
+				opp-hz = /bits/ 64 <620000000>;
+				opp-microvolt = <725000>, <850000>;
+			};
+
+			opp-653000000 {
+				opp-hz = /bits/ 64 <653000000>;
+				opp-microvolt = <743750>, <850000>;
+			};
+
+			opp-698000000 {
+				opp-hz = /bits/ 64 <698000000>;
+				opp-microvolt = <768750>, <868750>;
+			};
+
+			opp-743000000 {
+				opp-hz = /bits/ 64 <743000000>;
+				opp-microvolt = <793750>, <893750>;
+			};
+
+			opp-800000000 {
+				opp-hz = /bits/ 64 <800000000>;
+				opp-microvolt = <825000>, <925000>;
+			};
+		};
+
 		mmsys: syscon@14000000 {
 			compatible = "mediatek,mt8183-mmsys", "syscon";
 			reg = <0 0x14000000 0 0x1000>;
-- 
2.30.0.284.gd98b1dd5eaa7-goog


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

[PATCH v10 2/4] arm64: dts: mt8183: Add node for the Mali GPU

[Nicolas Boichat]

Add a basic GPU node for mt8183.

Signed-off-by: Nicolas Boichat <drinkcat@chromium.org>
---
The binding we use with out-of-tree Mali drivers includes more
clocks, this is used for devfreq: the out-of-tree driver switches
clk_mux to clk_sub_parent (26Mhz), adjusts clk_main_parent, then
switches clk_mux back to clk_main_parent:
(see https://chromium.googlesource.com/chromiumos/third_party/kernel/+/chromeos-4.19/drivers/gpu/arm/midgard/platform/mediatek/mali_kbase_runtime_pm.c#423)
clocks =
        <&topckgen CLK_TOP_MFGPLL_CK>,
        <&topckgen CLK_TOP_MUX_MFG>,
        <&clk26m>,
        <&mfgcfg CLK_MFG_BG3D>;
clock-names =
        "clk_main_parent",
        "clk_mux",
        "clk_sub_parent",
        "subsys_mfg_cg";
(based on discussions, this probably belongs in the clock core)

This only matters for devfreq, that is disabled anyway as we don't
have platform-specific code to handle >1 supplies.

(no changes since v6)

Changes in v6:
 - Add gpu regulators to kukui dtsi as well.
 - Power domains are now attached to spm, not scpsys
 - Drop R-B.

Changes in v5:
 - Rename "2d" power domain to "core2" (keep R-B again).

Changes in v4:
 - Add power-domain-names to describe the 3 domains.
   (kept Alyssa's reviewed-by as the change is minor)

Changes in v3:
 - No changes

Changes in v2:
 - Use sram instead of mali_sram as SRAM supply name.
 - Rename mali@ to gpu@.

 arch/arm64/boot/dts/mediatek/mt8183-evb.dts   |   6 +
 .../arm64/boot/dts/mediatek/mt8183-kukui.dtsi |   6 +
 arch/arm64/boot/dts/mediatek/mt8183.dtsi      | 105 ++++++++++++++++++
 3 files changed, 117 insertions(+)

diff --git a/arch/arm64/boot/dts/mediatek/mt8183-evb.dts b/arch/arm64/boot/dts/mediatek/mt8183-evb.dts
index cba2d8933e79..0a8c2fad8e16 100644
--- a/arch/arm64/boot/dts/mediatek/mt8183-evb.dts
+++ b/arch/arm64/boot/dts/mediatek/mt8183-evb.dts
@@ -42,6 +42,12 @@ &auxadc {
 	status = "okay";
 };
 
+&gpu {
+	supply-names = "mali", "sram";
+	mali-supply = <&mt6358_vgpu_reg>;
+	sram-supply = <&mt6358_vsram_gpu_reg>;
+};
+
 &i2c0 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&i2c_pins_0>;
diff --git a/arch/arm64/boot/dts/mediatek/mt8183-kukui.dtsi b/arch/arm64/boot/dts/mediatek/mt8183-kukui.dtsi
index bf2ad1294dd3..00d8e112cab9 100644
--- a/arch/arm64/boot/dts/mediatek/mt8183-kukui.dtsi
+++ b/arch/arm64/boot/dts/mediatek/mt8183-kukui.dtsi
@@ -249,6 +249,12 @@ &cpu7 {
 	proc-supply = <&mt6358_vproc11_reg>;
 };
 
+&gpu {
+	supply-names = "mali", "sram";
+	mali-supply = <&mt6358_vgpu_reg>;
+	sram-supply = <&mt6358_vsram_gpu_reg>;
+};
+
 &i2c0 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&i2c0_pins>;
diff --git a/arch/arm64/boot/dts/mediatek/mt8183.dtsi b/arch/arm64/boot/dts/mediatek/mt8183.dtsi
index 5b782a4769e7..5430e05e18a0 100644
--- a/arch/arm64/boot/dts/mediatek/mt8183.dtsi
+++ b/arch/arm64/boot/dts/mediatek/mt8183.dtsi
@@ -964,6 +964,111 @@ mfgcfg: syscon@13000000 {
 			#clock-cells = <1>;
 		};
 
+		gpu: gpu@13040000 {
+			compatible = "mediatek,mt8183-mali", "arm,mali-bifrost";
+			reg = <0 0x13040000 0 0x4000>;
+			interrupts =
+				<GIC_SPI 280 IRQ_TYPE_LEVEL_LOW>,
+				<GIC_SPI 279 IRQ_TYPE_LEVEL_LOW>,
+				<GIC_SPI 278 IRQ_TYPE_LEVEL_LOW>;
+			interrupt-names = "job", "mmu", "gpu";
+
+			clocks = <&topckgen CLK_TOP_MFGPLL_CK>;
+
+			power-domains =
+				<&spm MT8183_POWER_DOMAIN_MFG_CORE0>,
+				<&spm MT8183_POWER_DOMAIN_MFG_CORE1>,
+				<&spm MT8183_POWER_DOMAIN_MFG_2D>;
+			power-domain-names = "core0", "core1", "core2";
+
+			operating-points-v2 = <&gpu_opp_table>;
+		};
+
+		gpu_opp_table: opp_table0 {
+			compatible = "operating-points-v2";
+			opp-shared;
+
+			opp-300000000 {
+				opp-hz = /bits/ 64 <300000000>;
+				opp-microvolt = <625000>, <850000>;
+			};
+
+			opp-320000000 {
+				opp-hz = /bits/ 64 <320000000>;
+				opp-microvolt = <631250>, <850000>;
+			};
+
+			opp-340000000 {
+				opp-hz = /bits/ 64 <340000000>;
+				opp-microvolt = <637500>, <850000>;
+			};
+
+			opp-360000000 {
+				opp-hz = /bits/ 64 <360000000>;
+				opp-microvolt = <643750>, <850000>;
+			};
+
+			opp-380000000 {
+				opp-hz = /bits/ 64 <380000000>;
+				opp-microvolt = <650000>, <850000>;
+			};
+
+			opp-400000000 {
+				opp-hz = /bits/ 64 <400000000>;
+				opp-microvolt = <656250>, <850000>;
+			};
+
+			opp-420000000 {
+				opp-hz = /bits/ 64 <420000000>;
+				opp-microvolt = <662500>, <850000>;
+			};
+
+			opp-460000000 {
+				opp-hz = /bits/ 64 <460000000>;
+				opp-microvolt = <675000>, <850000>;
+			};
+
+			opp-500000000 {
+				opp-hz = /bits/ 64 <500000000>;
+				opp-microvolt = <687500>, <850000>;
+			};
+
+			opp-540000000 {
+				opp-hz = /bits/ 64 <540000000>;
+				opp-microvolt = <700000>, <850000>;
+			};
+
+			opp-580000000 {
+				opp-hz = /bits/ 64 <580000000>;
+				opp-microvolt = <712500>, <850000>;
+			};
+
+			opp-620000000 {
+				opp-hz = /bits/ 64 <620000000>;
+				opp-microvolt = <725000>, <850000>;
+			};
+
+			opp-653000000 {
+				opp-hz = /bits/ 64 <653000000>;
+				opp-microvolt = <743750>, <850000>;
+			};
+
+			opp-698000000 {
+				opp-hz = /bits/ 64 <698000000>;
+				opp-microvolt = <768750>, <868750>;
+			};
+
+			opp-743000000 {
+				opp-hz = /bits/ 64 <743000000>;
+				opp-microvolt = <793750>, <893750>;
+			};
+
+			opp-800000000 {
+				opp-hz = /bits/ 64 <800000000>;
+				opp-microvolt = <825000>, <925000>;
+			};
+		};
+
 		mmsys: syscon@14000000 {
 			compatible = "mediatek,mt8183-mmsys", "syscon";
 			reg = <0 0x14000000 0 0x1000>;
-- 
2.30.0.284.gd98b1dd5eaa7-goog


_______________________________________________
Linux-mediatek mailing list
Linux-mediatek@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-mediatek

Re: [PATCH v10 2/4] arm64: dts: mt8183: Add node for the Mali GPU

[Rob Herring]

On Wed, Jan 13, 2021 at 02:07:01PM +0800, Nicolas Boichat wrote:
> Add a basic GPU node for mt8183.
> 
> Signed-off-by: Nicolas Boichat <drinkcat@chromium.org>
> ---
> The binding we use with out-of-tree Mali drivers includes more
> clocks, this is used for devfreq: the out-of-tree driver switches
> clk_mux to clk_sub_parent (26Mhz), adjusts clk_main_parent, then
> switches clk_mux back to clk_main_parent:
> (see https://chromium.googlesource.com/chromiumos/third_party/kernel/+/chromeos-4.19/drivers/gpu/arm/midgard/platform/mediatek/mali_kbase_runtime_pm.c#423)
> clocks =
>         <&topckgen CLK_TOP_MFGPLL_CK>,
>         <&topckgen CLK_TOP_MUX_MFG>,
>         <&clk26m>,
>         <&mfgcfg CLK_MFG_BG3D>;
> clock-names =
>         "clk_main_parent",
>         "clk_mux",
>         "clk_sub_parent",
>         "subsys_mfg_cg";
> (based on discussions, this probably belongs in the clock core)
> 
> This only matters for devfreq, that is disabled anyway as we don't
> have platform-specific code to handle >1 supplies.
> 
> (no changes since v6)
> 
> Changes in v6:
>  - Add gpu regulators to kukui dtsi as well.
>  - Power domains are now attached to spm, not scpsys
>  - Drop R-B.
> 
> Changes in v5:
>  - Rename "2d" power domain to "core2" (keep R-B again).
> 
> Changes in v4:
>  - Add power-domain-names to describe the 3 domains.
>    (kept Alyssa's reviewed-by as the change is minor)
> 
> Changes in v3:
>  - No changes
> 
> Changes in v2:
>  - Use sram instead of mali_sram as SRAM supply name.
>  - Rename mali@ to gpu@.
> 
>  arch/arm64/boot/dts/mediatek/mt8183-evb.dts   |   6 +
>  .../arm64/boot/dts/mediatek/mt8183-kukui.dtsi |   6 +
>  arch/arm64/boot/dts/mediatek/mt8183.dtsi      | 105 ++++++++++++++++++
>  3 files changed, 117 insertions(+)
> 
> diff --git a/arch/arm64/boot/dts/mediatek/mt8183-evb.dts b/arch/arm64/boot/dts/mediatek/mt8183-evb.dts
> index cba2d8933e79..0a8c2fad8e16 100644
> --- a/arch/arm64/boot/dts/mediatek/mt8183-evb.dts
> +++ b/arch/arm64/boot/dts/mediatek/mt8183-evb.dts
> @@ -42,6 +42,12 @@ &auxadc {
>  	status = "okay";
>  };
>  
> +&gpu {
> +	supply-names = "mali", "sram";

Not a documented property, nor should it be.

Did you run this against dtbs_check with your schema changes?

> +	mali-supply = <&mt6358_vgpu_reg>;
> +	sram-supply = <&mt6358_vsram_gpu_reg>;
> +};
> +
>  &i2c0 {
>  	pinctrl-names = "default";
>  	pinctrl-0 = <&i2c_pins_0>;

Re: [PATCH v10 2/4] arm64: dts: mt8183: Add node for the Mali GPU

[Rob Herring]

On Wed, Jan 13, 2021 at 02:07:01PM +0800, Nicolas Boichat wrote:
> Add a basic GPU node for mt8183.
> 
> Signed-off-by: Nicolas Boichat <drinkcat@chromium.org>
> ---
> The binding we use with out-of-tree Mali drivers includes more
> clocks, this is used for devfreq: the out-of-tree driver switches
> clk_mux to clk_sub_parent (26Mhz), adjusts clk_main_parent, then
> switches clk_mux back to clk_main_parent:
> (see https://chromium.googlesource.com/chromiumos/third_party/kernel/+/chromeos-4.19/drivers/gpu/arm/midgard/platform/mediatek/mali_kbase_runtime_pm.c#423)
> clocks =
>         <&topckgen CLK_TOP_MFGPLL_CK>,
>         <&topckgen CLK_TOP_MUX_MFG>,
>         <&clk26m>,
>         <&mfgcfg CLK_MFG_BG3D>;
> clock-names =
>         "clk_main_parent",
>         "clk_mux",
>         "clk_sub_parent",
>         "subsys_mfg_cg";
> (based on discussions, this probably belongs in the clock core)
> 
> This only matters for devfreq, that is disabled anyway as we don't
> have platform-specific code to handle >1 supplies.
> 
> (no changes since v6)
> 
> Changes in v6:
>  - Add gpu regulators to kukui dtsi as well.
>  - Power domains are now attached to spm, not scpsys
>  - Drop R-B.
> 
> Changes in v5:
>  - Rename "2d" power domain to "core2" (keep R-B again).
> 
> Changes in v4:
>  - Add power-domain-names to describe the 3 domains.
>    (kept Alyssa's reviewed-by as the change is minor)
> 
> Changes in v3:
>  - No changes
> 
> Changes in v2:
>  - Use sram instead of mali_sram as SRAM supply name.
>  - Rename mali@ to gpu@.
> 
>  arch/arm64/boot/dts/mediatek/mt8183-evb.dts   |   6 +
>  .../arm64/boot/dts/mediatek/mt8183-kukui.dtsi |   6 +
>  arch/arm64/boot/dts/mediatek/mt8183.dtsi      | 105 ++++++++++++++++++
>  3 files changed, 117 insertions(+)
> 
> diff --git a/arch/arm64/boot/dts/mediatek/mt8183-evb.dts b/arch/arm64/boot/dts/mediatek/mt8183-evb.dts
> index cba2d8933e79..0a8c2fad8e16 100644
> --- a/arch/arm64/boot/dts/mediatek/mt8183-evb.dts
> +++ b/arch/arm64/boot/dts/mediatek/mt8183-evb.dts
> @@ -42,6 +42,12 @@ &auxadc {
>  	status = "okay";
>  };
>  
> +&gpu {
> +	supply-names = "mali", "sram";

Not a documented property, nor should it be.

Did you run this against dtbs_check with your schema changes?

> +	mali-supply = <&mt6358_vgpu_reg>;
> +	sram-supply = <&mt6358_vsram_gpu_reg>;
> +};
> +
>  &i2c0 {
>  	pinctrl-names = "default";
>  	pinctrl-0 = <&i2c_pins_0>;

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

Re: [PATCH v10 2/4] arm64: dts: mt8183: Add node for the Mali GPU

[Rob Herring]

On Wed, Jan 13, 2021 at 02:07:01PM +0800, Nicolas Boichat wrote:
> Add a basic GPU node for mt8183.
> 
> Signed-off-by: Nicolas Boichat <drinkcat@chromium.org>
> ---
> The binding we use with out-of-tree Mali drivers includes more
> clocks, this is used for devfreq: the out-of-tree driver switches
> clk_mux to clk_sub_parent (26Mhz), adjusts clk_main_parent, then
> switches clk_mux back to clk_main_parent:
> (see https://chromium.googlesource.com/chromiumos/third_party/kernel/+/chromeos-4.19/drivers/gpu/arm/midgard/platform/mediatek/mali_kbase_runtime_pm.c#423)
> clocks =
>         <&topckgen CLK_TOP_MFGPLL_CK>,
>         <&topckgen CLK_TOP_MUX_MFG>,
>         <&clk26m>,
>         <&mfgcfg CLK_MFG_BG3D>;
> clock-names =
>         "clk_main_parent",
>         "clk_mux",
>         "clk_sub_parent",
>         "subsys_mfg_cg";
> (based on discussions, this probably belongs in the clock core)
> 
> This only matters for devfreq, that is disabled anyway as we don't
> have platform-specific code to handle >1 supplies.
> 
> (no changes since v6)
> 
> Changes in v6:
>  - Add gpu regulators to kukui dtsi as well.
>  - Power domains are now attached to spm, not scpsys
>  - Drop R-B.
> 
> Changes in v5:
>  - Rename "2d" power domain to "core2" (keep R-B again).
> 
> Changes in v4:
>  - Add power-domain-names to describe the 3 domains.
>    (kept Alyssa's reviewed-by as the change is minor)
> 
> Changes in v3:
>  - No changes
> 
> Changes in v2:
>  - Use sram instead of mali_sram as SRAM supply name.
>  - Rename mali@ to gpu@.
> 
>  arch/arm64/boot/dts/mediatek/mt8183-evb.dts   |   6 +
>  .../arm64/boot/dts/mediatek/mt8183-kukui.dtsi |   6 +
>  arch/arm64/boot/dts/mediatek/mt8183.dtsi      | 105 ++++++++++++++++++
>  3 files changed, 117 insertions(+)
> 
> diff --git a/arch/arm64/boot/dts/mediatek/mt8183-evb.dts b/arch/arm64/boot/dts/mediatek/mt8183-evb.dts
> index cba2d8933e79..0a8c2fad8e16 100644
> --- a/arch/arm64/boot/dts/mediatek/mt8183-evb.dts
> +++ b/arch/arm64/boot/dts/mediatek/mt8183-evb.dts
> @@ -42,6 +42,12 @@ &auxadc {
>  	status = "okay";
>  };
>  
> +&gpu {
> +	supply-names = "mali", "sram";

Not a documented property, nor should it be.

Did you run this against dtbs_check with your schema changes?

> +	mali-supply = <&mt6358_vgpu_reg>;
> +	sram-supply = <&mt6358_vsram_gpu_reg>;
> +};
> +
>  &i2c0 {
>  	pinctrl-names = "default";
>  	pinctrl-0 = <&i2c_pins_0>;

_______________________________________________
Linux-mediatek mailing list
Linux-mediatek@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-mediatek

Re: [PATCH v10 2/4] arm64: dts: mt8183: Add node for the Mali GPU

[Nicolas Boichat]

On Tue, Jan 26, 2021 at 3:27 AM Rob Herring <robh@kernel.org> wrote:
>
[...]
> > +&gpu {
> > +     supply-names = "mali", "sram";
>
> Not a documented property, nor should it be.
>
> Did you run this against dtbs_check with your schema changes?

I did not, for some reasons I hit a strange issue (kernel build system
wouldn't pick up dt-* tools from ~/.local/bin... solved with a bunch
of symlinks to ~/bin). Gave up too quickly ,-(

Anyway, v11 coming with clean make dtbs_check
DT_SCHEMA_FILES=Documentation/devicetree/bindings/gpu/arm,mali-bifrost.yaml.

>
> > +     mali-supply = <&mt6358_vgpu_reg>;
> > +     sram-supply = <&mt6358_vsram_gpu_reg>;
> > +};
> > +
> >  &i2c0 {
> >       pinctrl-names = "default";
> >       pinctrl-0 = <&i2c_pins_0>;

Re: [PATCH v10 2/4] arm64: dts: mt8183: Add node for the Mali GPU

[Nicolas Boichat]

On Tue, Jan 26, 2021 at 3:27 AM Rob Herring <robh@kernel.org> wrote:
>
[...]
> > +&gpu {
> > +     supply-names = "mali", "sram";
>
> Not a documented property, nor should it be.
>
> Did you run this against dtbs_check with your schema changes?

I did not, for some reasons I hit a strange issue (kernel build system
wouldn't pick up dt-* tools from ~/.local/bin... solved with a bunch
of symlinks to ~/bin). Gave up too quickly ,-(

Anyway, v11 coming with clean make dtbs_check
DT_SCHEMA_FILES=Documentation/devicetree/bindings/gpu/arm,mali-bifrost.yaml.

>
> > +     mali-supply = <&mt6358_vgpu_reg>;
> > +     sram-supply = <&mt6358_vsram_gpu_reg>;
> > +};
> > +
> >  &i2c0 {
> >       pinctrl-names = "default";
> >       pinctrl-0 = <&i2c_pins_0>;

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

Re: [PATCH v10 2/4] arm64: dts: mt8183: Add node for the Mali GPU

[Nicolas Boichat]

On Tue, Jan 26, 2021 at 3:27 AM Rob Herring <robh@kernel.org> wrote:
>
[...]
> > +&gpu {
> > +     supply-names = "mali", "sram";
>
> Not a documented property, nor should it be.
>
> Did you run this against dtbs_check with your schema changes?

I did not, for some reasons I hit a strange issue (kernel build system
wouldn't pick up dt-* tools from ~/.local/bin... solved with a bunch
of symlinks to ~/bin). Gave up too quickly ,-(

Anyway, v11 coming with clean make dtbs_check
DT_SCHEMA_FILES=Documentation/devicetree/bindings/gpu/arm,mali-bifrost.yaml.

>
> > +     mali-supply = <&mt6358_vgpu_reg>;
> > +     sram-supply = <&mt6358_vsram_gpu_reg>;
> > +};
> > +
> >  &i2c0 {
> >       pinctrl-names = "default";
> >       pinctrl-0 = <&i2c_pins_0>;

_______________________________________________
Linux-mediatek mailing list
Linux-mediatek@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-mediatek

[PATCH v10 3/4] drm/panfrost: devfreq: Disable devfreq when num_supplies > 1

[Nicolas Boichat]

GPUs with more than a single regulator (e.g. G72 on MT8183) will
require platform-specific handling for devfreq, for 2 reasons:
 1. The opp core (drivers/opp/core.c:_generic_set_opp_regulator)
    does not support multiple regulators, so we'll need custom
    handlers.
 2. Generally, platforms with 2 regulators have platform-specific
    constraints on how the voltages should be set (e.g.
    minimum/maximum voltage difference between them), so we
    should not just create generic handlers that simply
    change the voltages without taking care of those constraints.

Disable devfreq for now on those GPUs.

Signed-off-by: Nicolas Boichat <drinkcat@chromium.org>
Reviewed-by: Tomeu Vizoso <tomeu.vizoso@collabora.com>
---

(no changes since v9)

Changes in v9:
 - Explain why devfreq needs to be disabled for GPUs with >1
   regulators.

Changes in v8:
 - Use DRM_DEV_INFO instead of ERROR

Changes in v7:
 - Fix GPU ID in commit message

Changes in v6:
 - New change

 drivers/gpu/drm/panfrost/panfrost_devfreq.c | 9 +++++++++
 1 file changed, 9 insertions(+)

diff --git a/drivers/gpu/drm/panfrost/panfrost_devfreq.c b/drivers/gpu/drm/panfrost/panfrost_devfreq.c
index f44d28fad085..812cfecdee3b 100644
--- a/drivers/gpu/drm/panfrost/panfrost_devfreq.c
+++ b/drivers/gpu/drm/panfrost/panfrost_devfreq.c
@@ -92,6 +92,15 @@ int panfrost_devfreq_init(struct panfrost_device *pfdev)
 	struct thermal_cooling_device *cooling;
 	struct panfrost_devfreq *pfdevfreq = &pfdev->pfdevfreq;
 
+	if (pfdev->comp->num_supplies > 1) {
+		/*
+		 * GPUs with more than 1 supply require platform-specific handling:
+		 * continue without devfreq
+		 */
+		DRM_DEV_INFO(dev, "More than 1 supply is not supported yet\n");
+		return 0;
+	}
+
 	opp_table = dev_pm_opp_set_regulators(dev, pfdev->comp->supply_names,
 					      pfdev->comp->num_supplies);
 	if (IS_ERR(opp_table)) {
-- 
2.30.0.284.gd98b1dd5eaa7-goog

[PATCH v10 3/4] drm/panfrost: devfreq: Disable devfreq when num_supplies > 1

[Nicolas Boichat]

GPUs with more than a single regulator (e.g. G72 on MT8183) will
require platform-specific handling for devfreq, for 2 reasons:
 1. The opp core (drivers/opp/core.c:_generic_set_opp_regulator)
    does not support multiple regulators, so we'll need custom
    handlers.
 2. Generally, platforms with 2 regulators have platform-specific
    constraints on how the voltages should be set (e.g.
    minimum/maximum voltage difference between them), so we
    should not just create generic handlers that simply
    change the voltages without taking care of those constraints.

Disable devfreq for now on those GPUs.

Signed-off-by: Nicolas Boichat <drinkcat@chromium.org>
Reviewed-by: Tomeu Vizoso <tomeu.vizoso@collabora.com>
---

(no changes since v9)

Changes in v9:
 - Explain why devfreq needs to be disabled for GPUs with >1
   regulators.

Changes in v8:
 - Use DRM_DEV_INFO instead of ERROR

Changes in v7:
 - Fix GPU ID in commit message

Changes in v6:
 - New change

 drivers/gpu/drm/panfrost/panfrost_devfreq.c | 9 +++++++++
 1 file changed, 9 insertions(+)

diff --git a/drivers/gpu/drm/panfrost/panfrost_devfreq.c b/drivers/gpu/drm/panfrost/panfrost_devfreq.c
index f44d28fad085..812cfecdee3b 100644
--- a/drivers/gpu/drm/panfrost/panfrost_devfreq.c
+++ b/drivers/gpu/drm/panfrost/panfrost_devfreq.c
@@ -92,6 +92,15 @@ int panfrost_devfreq_init(struct panfrost_device *pfdev)
 	struct thermal_cooling_device *cooling;
 	struct panfrost_devfreq *pfdevfreq = &pfdev->pfdevfreq;
 
+	if (pfdev->comp->num_supplies > 1) {
+		/*
+		 * GPUs with more than 1 supply require platform-specific handling:
+		 * continue without devfreq
+		 */
+		DRM_DEV_INFO(dev, "More than 1 supply is not supported yet\n");
+		return 0;
+	}
+
 	opp_table = dev_pm_opp_set_regulators(dev, pfdev->comp->supply_names,
 					      pfdev->comp->num_supplies);
 	if (IS_ERR(opp_table)) {
-- 
2.30.0.284.gd98b1dd5eaa7-goog

_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel

Re: [PATCH v10 3/4] drm/panfrost: devfreq: Disable devfreq when num_supplies > 1

[Steven Price]

On 13/01/2021 06:07, Nicolas Boichat wrote:
> GPUs with more than a single regulator (e.g. G72 on MT8183) will
> require platform-specific handling for devfreq, for 2 reasons:
>   1. The opp core (drivers/opp/core.c:_generic_set_opp_regulator)
>      does not support multiple regulators, so we'll need custom
>      handlers.
>   2. Generally, platforms with 2 regulators have platform-specific
>      constraints on how the voltages should be set (e.g.
>      minimum/maximum voltage difference between them), so we
>      should not just create generic handlers that simply
>      change the voltages without taking care of those constraints.
> 
> Disable devfreq for now on those GPUs.
> 
> Signed-off-by: Nicolas Boichat <drinkcat@chromium.org>
> Reviewed-by: Tomeu Vizoso <tomeu.vizoso@collabora.com>

Thanks for the clarification in the commit message.

Reviewed-by: Steven Price <steven.price@arm.com>

> ---
> 
> (no changes since v9)
> 
> Changes in v9:
>   - Explain why devfreq needs to be disabled for GPUs with >1
>     regulators.
> 
> Changes in v8:
>   - Use DRM_DEV_INFO instead of ERROR
> 
> Changes in v7:
>   - Fix GPU ID in commit message
> 
> Changes in v6:
>   - New change
> 
>   drivers/gpu/drm/panfrost/panfrost_devfreq.c | 9 +++++++++
>   1 file changed, 9 insertions(+)
> 
> diff --git a/drivers/gpu/drm/panfrost/panfrost_devfreq.c b/drivers/gpu/drm/panfrost/panfrost_devfreq.c
> index f44d28fad085..812cfecdee3b 100644
> --- a/drivers/gpu/drm/panfrost/panfrost_devfreq.c
> +++ b/drivers/gpu/drm/panfrost/panfrost_devfreq.c
> @@ -92,6 +92,15 @@ int panfrost_devfreq_init(struct panfrost_device *pfdev)
>   	struct thermal_cooling_device *cooling;
>   	struct panfrost_devfreq *pfdevfreq = &pfdev->pfdevfreq;
>   
> +	if (pfdev->comp->num_supplies > 1) {
> +		/*
> +		 * GPUs with more than 1 supply require platform-specific handling:
> +		 * continue without devfreq
> +		 */
> +		DRM_DEV_INFO(dev, "More than 1 supply is not supported yet\n");
> +		return 0;
> +	}
> +
>   	opp_table = dev_pm_opp_set_regulators(dev, pfdev->comp->supply_names,
>   					      pfdev->comp->num_supplies);
>   	if (IS_ERR(opp_table)) {
> 

Re: [PATCH v10 3/4] drm/panfrost: devfreq: Disable devfreq when num_supplies > 1

[Steven Price]

On 13/01/2021 06:07, Nicolas Boichat wrote:
> GPUs with more than a single regulator (e.g. G72 on MT8183) will
> require platform-specific handling for devfreq, for 2 reasons:
>   1. The opp core (drivers/opp/core.c:_generic_set_opp_regulator)
>      does not support multiple regulators, so we'll need custom
>      handlers.
>   2. Generally, platforms with 2 regulators have platform-specific
>      constraints on how the voltages should be set (e.g.
>      minimum/maximum voltage difference between them), so we
>      should not just create generic handlers that simply
>      change the voltages without taking care of those constraints.
> 
> Disable devfreq for now on those GPUs.
> 
> Signed-off-by: Nicolas Boichat <drinkcat@chromium.org>
> Reviewed-by: Tomeu Vizoso <tomeu.vizoso@collabora.com>

Thanks for the clarification in the commit message.

Reviewed-by: Steven Price <steven.price@arm.com>

> ---
> 
> (no changes since v9)
> 
> Changes in v9:
>   - Explain why devfreq needs to be disabled for GPUs with >1
>     regulators.
> 
> Changes in v8:
>   - Use DRM_DEV_INFO instead of ERROR
> 
> Changes in v7:
>   - Fix GPU ID in commit message
> 
> Changes in v6:
>   - New change
> 
>   drivers/gpu/drm/panfrost/panfrost_devfreq.c | 9 +++++++++
>   1 file changed, 9 insertions(+)
> 
> diff --git a/drivers/gpu/drm/panfrost/panfrost_devfreq.c b/drivers/gpu/drm/panfrost/panfrost_devfreq.c
> index f44d28fad085..812cfecdee3b 100644
> --- a/drivers/gpu/drm/panfrost/panfrost_devfreq.c
> +++ b/drivers/gpu/drm/panfrost/panfrost_devfreq.c
> @@ -92,6 +92,15 @@ int panfrost_devfreq_init(struct panfrost_device *pfdev)
>   	struct thermal_cooling_device *cooling;
>   	struct panfrost_devfreq *pfdevfreq = &pfdev->pfdevfreq;
>   
> +	if (pfdev->comp->num_supplies > 1) {
> +		/*
> +		 * GPUs with more than 1 supply require platform-specific handling:
> +		 * continue without devfreq
> +		 */
> +		DRM_DEV_INFO(dev, "More than 1 supply is not supported yet\n");
> +		return 0;
> +	}
> +
>   	opp_table = dev_pm_opp_set_regulators(dev, pfdev->comp->supply_names,
>   					      pfdev->comp->num_supplies);
>   	if (IS_ERR(opp_table)) {
> 

_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel

[PATCH v10 4/4] drm/panfrost: Add mt8183-mali compatible string

[Nicolas Boichat]

Add support for MT8183's G72 Bifrost.

Signed-off-by: Nicolas Boichat <drinkcat@chromium.org>
Reviewed-by: Tomeu Vizoso <tomeu.vizoso@collabora.com>
---

(no changes since v7)

Changes in v7:
 - Fix GPU ID in commit message

Changes in v6:
 - Context conflicts, reflow the code.
 - Use ARRAY_SIZE for power domains too.

Changes in v5:
 - Change power domain name from 2d to core2.

Changes in v4:
 - Add power domain names.

Changes in v3:
 - Match mt8183-mali instead of bifrost, as we require special
   handling for the 2 regulators and 3 power domains.

 drivers/gpu/drm/panfrost/panfrost_drv.c | 10 ++++++++++
 1 file changed, 10 insertions(+)

diff --git a/drivers/gpu/drm/panfrost/panfrost_drv.c b/drivers/gpu/drm/panfrost/panfrost_drv.c
index 83a461bdeea8..ca07098a6141 100644
--- a/drivers/gpu/drm/panfrost/panfrost_drv.c
+++ b/drivers/gpu/drm/panfrost/panfrost_drv.c
@@ -665,6 +665,15 @@ static const struct panfrost_compatible amlogic_data = {
 	.vendor_quirk = panfrost_gpu_amlogic_quirk,
 };
 
+const char * const mediatek_mt8183_supplies[] = { "mali", "sram" };
+const char * const mediatek_mt8183_pm_domains[] = { "core0", "core1", "core2" };
+static const struct panfrost_compatible mediatek_mt8183_data = {
+	.num_supplies = ARRAY_SIZE(mediatek_mt8183_supplies),
+	.supply_names = mediatek_mt8183_supplies,
+	.num_pm_domains = ARRAY_SIZE(mediatek_mt8183_pm_domains),
+	.pm_domain_names = mediatek_mt8183_pm_domains,
+};
+
 static const struct of_device_id dt_match[] = {
 	/* Set first to probe before the generic compatibles */
 	{ .compatible = "amlogic,meson-gxm-mali",
@@ -681,6 +690,7 @@ static const struct of_device_id dt_match[] = {
 	{ .compatible = "arm,mali-t860", .data = &default_data, },
 	{ .compatible = "arm,mali-t880", .data = &default_data, },
 	{ .compatible = "arm,mali-bifrost", .data = &default_data, },
+	{ .compatible = "mediatek,mt8183-mali", .data = &mediatek_mt8183_data },
 	{}
 };
 MODULE_DEVICE_TABLE(of, dt_match);
-- 
2.30.0.284.gd98b1dd5eaa7-goog

[PATCH v10 4/4] drm/panfrost: Add mt8183-mali compatible string

[Nicolas Boichat]

Add support for MT8183's G72 Bifrost.

Signed-off-by: Nicolas Boichat <drinkcat@chromium.org>
Reviewed-by: Tomeu Vizoso <tomeu.vizoso@collabora.com>
---

(no changes since v7)

Changes in v7:
 - Fix GPU ID in commit message

Changes in v6:
 - Context conflicts, reflow the code.
 - Use ARRAY_SIZE for power domains too.

Changes in v5:
 - Change power domain name from 2d to core2.

Changes in v4:
 - Add power domain names.

Changes in v3:
 - Match mt8183-mali instead of bifrost, as we require special
   handling for the 2 regulators and 3 power domains.

 drivers/gpu/drm/panfrost/panfrost_drv.c | 10 ++++++++++
 1 file changed, 10 insertions(+)

diff --git a/drivers/gpu/drm/panfrost/panfrost_drv.c b/drivers/gpu/drm/panfrost/panfrost_drv.c
index 83a461bdeea8..ca07098a6141 100644
--- a/drivers/gpu/drm/panfrost/panfrost_drv.c
+++ b/drivers/gpu/drm/panfrost/panfrost_drv.c
@@ -665,6 +665,15 @@ static const struct panfrost_compatible amlogic_data = {
 	.vendor_quirk = panfrost_gpu_amlogic_quirk,
 };
 
+const char * const mediatek_mt8183_supplies[] = { "mali", "sram" };
+const char * const mediatek_mt8183_pm_domains[] = { "core0", "core1", "core2" };
+static const struct panfrost_compatible mediatek_mt8183_data = {
+	.num_supplies = ARRAY_SIZE(mediatek_mt8183_supplies),
+	.supply_names = mediatek_mt8183_supplies,
+	.num_pm_domains = ARRAY_SIZE(mediatek_mt8183_pm_domains),
+	.pm_domain_names = mediatek_mt8183_pm_domains,
+};
+
 static const struct of_device_id dt_match[] = {
 	/* Set first to probe before the generic compatibles */
 	{ .compatible = "amlogic,meson-gxm-mali",
@@ -681,6 +690,7 @@ static const struct of_device_id dt_match[] = {
 	{ .compatible = "arm,mali-t860", .data = &default_data, },
 	{ .compatible = "arm,mali-t880", .data = &default_data, },
 	{ .compatible = "arm,mali-bifrost", .data = &default_data, },
+	{ .compatible = "mediatek,mt8183-mali", .data = &mediatek_mt8183_data },
 	{}
 };
 MODULE_DEVICE_TABLE(of, dt_match);
-- 
2.30.0.284.gd98b1dd5eaa7-goog

_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel

[PATCH v10 4/4] drm/panfrost: Add mt8183-mali compatible string

[Nicolas Boichat]

Add support for MT8183's G72 Bifrost.

Signed-off-by: Nicolas Boichat <drinkcat@chromium.org>
Reviewed-by: Tomeu Vizoso <tomeu.vizoso@collabora.com>
---

(no changes since v7)

Changes in v7:
 - Fix GPU ID in commit message

Changes in v6:
 - Context conflicts, reflow the code.
 - Use ARRAY_SIZE for power domains too.

Changes in v5:
 - Change power domain name from 2d to core2.

Changes in v4:
 - Add power domain names.

Changes in v3:
 - Match mt8183-mali instead of bifrost, as we require special
   handling for the 2 regulators and 3 power domains.

 drivers/gpu/drm/panfrost/panfrost_drv.c | 10 ++++++++++
 1 file changed, 10 insertions(+)

diff --git a/drivers/gpu/drm/panfrost/panfrost_drv.c b/drivers/gpu/drm/panfrost/panfrost_drv.c
index 83a461bdeea8..ca07098a6141 100644
--- a/drivers/gpu/drm/panfrost/panfrost_drv.c
+++ b/drivers/gpu/drm/panfrost/panfrost_drv.c
@@ -665,6 +665,15 @@ static const struct panfrost_compatible amlogic_data = {
 	.vendor_quirk = panfrost_gpu_amlogic_quirk,
 };
 
+const char * const mediatek_mt8183_supplies[] = { "mali", "sram" };
+const char * const mediatek_mt8183_pm_domains[] = { "core0", "core1", "core2" };
+static const struct panfrost_compatible mediatek_mt8183_data = {
+	.num_supplies = ARRAY_SIZE(mediatek_mt8183_supplies),
+	.supply_names = mediatek_mt8183_supplies,
+	.num_pm_domains = ARRAY_SIZE(mediatek_mt8183_pm_domains),
+	.pm_domain_names = mediatek_mt8183_pm_domains,
+};
+
 static const struct of_device_id dt_match[] = {
 	/* Set first to probe before the generic compatibles */
 	{ .compatible = "amlogic,meson-gxm-mali",
@@ -681,6 +690,7 @@ static const struct of_device_id dt_match[] = {
 	{ .compatible = "arm,mali-t860", .data = &default_data, },
 	{ .compatible = "arm,mali-t880", .data = &default_data, },
 	{ .compatible = "arm,mali-bifrost", .data = &default_data, },
+	{ .compatible = "mediatek,mt8183-mali", .data = &mediatek_mt8183_data },
 	{}
 };
 MODULE_DEVICE_TABLE(of, dt_match);
-- 
2.30.0.284.gd98b1dd5eaa7-goog


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

[PATCH v10 4/4] drm/panfrost: Add mt8183-mali compatible string

[Nicolas Boichat]

Add support for MT8183's G72 Bifrost.

Signed-off-by: Nicolas Boichat <drinkcat@chromium.org>
Reviewed-by: Tomeu Vizoso <tomeu.vizoso@collabora.com>
---

(no changes since v7)

Changes in v7:
 - Fix GPU ID in commit message

Changes in v6:
 - Context conflicts, reflow the code.
 - Use ARRAY_SIZE for power domains too.

Changes in v5:
 - Change power domain name from 2d to core2.

Changes in v4:
 - Add power domain names.

Changes in v3:
 - Match mt8183-mali instead of bifrost, as we require special
   handling for the 2 regulators and 3 power domains.

 drivers/gpu/drm/panfrost/panfrost_drv.c | 10 ++++++++++
 1 file changed, 10 insertions(+)

diff --git a/drivers/gpu/drm/panfrost/panfrost_drv.c b/drivers/gpu/drm/panfrost/panfrost_drv.c
index 83a461bdeea8..ca07098a6141 100644
--- a/drivers/gpu/drm/panfrost/panfrost_drv.c
+++ b/drivers/gpu/drm/panfrost/panfrost_drv.c
@@ -665,6 +665,15 @@ static const struct panfrost_compatible amlogic_data = {
 	.vendor_quirk = panfrost_gpu_amlogic_quirk,
 };
 
+const char * const mediatek_mt8183_supplies[] = { "mali", "sram" };
+const char * const mediatek_mt8183_pm_domains[] = { "core0", "core1", "core2" };
+static const struct panfrost_compatible mediatek_mt8183_data = {
+	.num_supplies = ARRAY_SIZE(mediatek_mt8183_supplies),
+	.supply_names = mediatek_mt8183_supplies,
+	.num_pm_domains = ARRAY_SIZE(mediatek_mt8183_pm_domains),
+	.pm_domain_names = mediatek_mt8183_pm_domains,
+};
+
 static const struct of_device_id dt_match[] = {
 	/* Set first to probe before the generic compatibles */
 	{ .compatible = "amlogic,meson-gxm-mali",
@@ -681,6 +690,7 @@ static const struct of_device_id dt_match[] = {
 	{ .compatible = "arm,mali-t860", .data = &default_data, },
 	{ .compatible = "arm,mali-t880", .data = &default_data, },
 	{ .compatible = "arm,mali-bifrost", .data = &default_data, },
+	{ .compatible = "mediatek,mt8183-mali", .data = &mediatek_mt8183_data },
 	{}
 };
 MODULE_DEVICE_TABLE(of, dt_match);
-- 
2.30.0.284.gd98b1dd5eaa7-goog


_______________________________________________
Linux-mediatek mailing list
Linux-mediatek@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-mediatek

Re: [PATCH v10 4/4] drm/panfrost: Add mt8183-mali compatible string

[Steven Price]

On 13/01/2021 06:07, Nicolas Boichat wrote:
> Add support for MT8183's G72 Bifrost.
> 
> Signed-off-by: Nicolas Boichat <drinkcat@chromium.org>
> Reviewed-by: Tomeu Vizoso <tomeu.vizoso@collabora.com>

LGTM

Reviewed-by: Steven Price <steven.price@arm.com>

> ---
> 
> (no changes since v7)
> 
> Changes in v7:
>   - Fix GPU ID in commit message
> 
> Changes in v6:
>   - Context conflicts, reflow the code.
>   - Use ARRAY_SIZE for power domains too.
> 
> Changes in v5:
>   - Change power domain name from 2d to core2.
> 
> Changes in v4:
>   - Add power domain names.
> 
> Changes in v3:
>   - Match mt8183-mali instead of bifrost, as we require special
>     handling for the 2 regulators and 3 power domains.
> 
>   drivers/gpu/drm/panfrost/panfrost_drv.c | 10 ++++++++++
>   1 file changed, 10 insertions(+)
> 
> diff --git a/drivers/gpu/drm/panfrost/panfrost_drv.c b/drivers/gpu/drm/panfrost/panfrost_drv.c
> index 83a461bdeea8..ca07098a6141 100644
> --- a/drivers/gpu/drm/panfrost/panfrost_drv.c
> +++ b/drivers/gpu/drm/panfrost/panfrost_drv.c
> @@ -665,6 +665,15 @@ static const struct panfrost_compatible amlogic_data = {
>   	.vendor_quirk = panfrost_gpu_amlogic_quirk,
>   };
>   
> +const char * const mediatek_mt8183_supplies[] = { "mali", "sram" };
> +const char * const mediatek_mt8183_pm_domains[] = { "core0", "core1", "core2" };
> +static const struct panfrost_compatible mediatek_mt8183_data = {
> +	.num_supplies = ARRAY_SIZE(mediatek_mt8183_supplies),
> +	.supply_names = mediatek_mt8183_supplies,
> +	.num_pm_domains = ARRAY_SIZE(mediatek_mt8183_pm_domains),
> +	.pm_domain_names = mediatek_mt8183_pm_domains,
> +};
> +
>   static const struct of_device_id dt_match[] = {
>   	/* Set first to probe before the generic compatibles */
>   	{ .compatible = "amlogic,meson-gxm-mali",
> @@ -681,6 +690,7 @@ static const struct of_device_id dt_match[] = {
>   	{ .compatible = "arm,mali-t860", .data = &default_data, },
>   	{ .compatible = "arm,mali-t880", .data = &default_data, },
>   	{ .compatible = "arm,mali-bifrost", .data = &default_data, },
> +	{ .compatible = "mediatek,mt8183-mali", .data = &mediatek_mt8183_data },
>   	{}
>   };
>   MODULE_DEVICE_TABLE(of, dt_match);
> 

Re: [PATCH v10 4/4] drm/panfrost: Add mt8183-mali compatible string

[Steven Price]

On 13/01/2021 06:07, Nicolas Boichat wrote:
> Add support for MT8183's G72 Bifrost.
> 
> Signed-off-by: Nicolas Boichat <drinkcat@chromium.org>
> Reviewed-by: Tomeu Vizoso <tomeu.vizoso@collabora.com>

LGTM

Reviewed-by: Steven Price <steven.price@arm.com>

> ---
> 
> (no changes since v7)
> 
> Changes in v7:
>   - Fix GPU ID in commit message
> 
> Changes in v6:
>   - Context conflicts, reflow the code.
>   - Use ARRAY_SIZE for power domains too.
> 
> Changes in v5:
>   - Change power domain name from 2d to core2.
> 
> Changes in v4:
>   - Add power domain names.
> 
> Changes in v3:
>   - Match mt8183-mali instead of bifrost, as we require special
>     handling for the 2 regulators and 3 power domains.
> 
>   drivers/gpu/drm/panfrost/panfrost_drv.c | 10 ++++++++++
>   1 file changed, 10 insertions(+)
> 
> diff --git a/drivers/gpu/drm/panfrost/panfrost_drv.c b/drivers/gpu/drm/panfrost/panfrost_drv.c
> index 83a461bdeea8..ca07098a6141 100644
> --- a/drivers/gpu/drm/panfrost/panfrost_drv.c
> +++ b/drivers/gpu/drm/panfrost/panfrost_drv.c
> @@ -665,6 +665,15 @@ static const struct panfrost_compatible amlogic_data = {
>   	.vendor_quirk = panfrost_gpu_amlogic_quirk,
>   };
>   
> +const char * const mediatek_mt8183_supplies[] = { "mali", "sram" };
> +const char * const mediatek_mt8183_pm_domains[] = { "core0", "core1", "core2" };
> +static const struct panfrost_compatible mediatek_mt8183_data = {
> +	.num_supplies = ARRAY_SIZE(mediatek_mt8183_supplies),
> +	.supply_names = mediatek_mt8183_supplies,
> +	.num_pm_domains = ARRAY_SIZE(mediatek_mt8183_pm_domains),
> +	.pm_domain_names = mediatek_mt8183_pm_domains,
> +};
> +
>   static const struct of_device_id dt_match[] = {
>   	/* Set first to probe before the generic compatibles */
>   	{ .compatible = "amlogic,meson-gxm-mali",
> @@ -681,6 +690,7 @@ static const struct of_device_id dt_match[] = {
>   	{ .compatible = "arm,mali-t860", .data = &default_data, },
>   	{ .compatible = "arm,mali-t880", .data = &default_data, },
>   	{ .compatible = "arm,mali-bifrost", .data = &default_data, },
> +	{ .compatible = "mediatek,mt8183-mali", .data = &mediatek_mt8183_data },
>   	{}
>   };
>   MODULE_DEVICE_TABLE(of, dt_match);
> 

_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel

Re: [PATCH v10 4/4] drm/panfrost: Add mt8183-mali compatible string

[Steven Price]

On 13/01/2021 06:07, Nicolas Boichat wrote:
> Add support for MT8183's G72 Bifrost.
> 
> Signed-off-by: Nicolas Boichat <drinkcat@chromium.org>
> Reviewed-by: Tomeu Vizoso <tomeu.vizoso@collabora.com>

LGTM

Reviewed-by: Steven Price <steven.price@arm.com>

> ---
> 
> (no changes since v7)
> 
> Changes in v7:
>   - Fix GPU ID in commit message
> 
> Changes in v6:
>   - Context conflicts, reflow the code.
>   - Use ARRAY_SIZE for power domains too.
> 
> Changes in v5:
>   - Change power domain name from 2d to core2.
> 
> Changes in v4:
>   - Add power domain names.
> 
> Changes in v3:
>   - Match mt8183-mali instead of bifrost, as we require special
>     handling for the 2 regulators and 3 power domains.
> 
>   drivers/gpu/drm/panfrost/panfrost_drv.c | 10 ++++++++++
>   1 file changed, 10 insertions(+)
> 
> diff --git a/drivers/gpu/drm/panfrost/panfrost_drv.c b/drivers/gpu/drm/panfrost/panfrost_drv.c
> index 83a461bdeea8..ca07098a6141 100644
> --- a/drivers/gpu/drm/panfrost/panfrost_drv.c
> +++ b/drivers/gpu/drm/panfrost/panfrost_drv.c
> @@ -665,6 +665,15 @@ static const struct panfrost_compatible amlogic_data = {
>   	.vendor_quirk = panfrost_gpu_amlogic_quirk,
>   };
>   
> +const char * const mediatek_mt8183_supplies[] = { "mali", "sram" };
> +const char * const mediatek_mt8183_pm_domains[] = { "core0", "core1", "core2" };
> +static const struct panfrost_compatible mediatek_mt8183_data = {
> +	.num_supplies = ARRAY_SIZE(mediatek_mt8183_supplies),
> +	.supply_names = mediatek_mt8183_supplies,
> +	.num_pm_domains = ARRAY_SIZE(mediatek_mt8183_pm_domains),
> +	.pm_domain_names = mediatek_mt8183_pm_domains,
> +};
> +
>   static const struct of_device_id dt_match[] = {
>   	/* Set first to probe before the generic compatibles */
>   	{ .compatible = "amlogic,meson-gxm-mali",
> @@ -681,6 +690,7 @@ static const struct of_device_id dt_match[] = {
>   	{ .compatible = "arm,mali-t860", .data = &default_data, },
>   	{ .compatible = "arm,mali-t880", .data = &default_data, },
>   	{ .compatible = "arm,mali-bifrost", .data = &default_data, },
> +	{ .compatible = "mediatek,mt8183-mali", .data = &mediatek_mt8183_data },
>   	{}
>   };
>   MODULE_DEVICE_TABLE(of, dt_match);
> 


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

Re: [PATCH v10 4/4] drm/panfrost: Add mt8183-mali compatible string

[Steven Price]

On 13/01/2021 06:07, Nicolas Boichat wrote:
> Add support for MT8183's G72 Bifrost.
> 
> Signed-off-by: Nicolas Boichat <drinkcat@chromium.org>
> Reviewed-by: Tomeu Vizoso <tomeu.vizoso@collabora.com>

LGTM

Reviewed-by: Steven Price <steven.price@arm.com>

> ---
> 
> (no changes since v7)
> 
> Changes in v7:
>   - Fix GPU ID in commit message
> 
> Changes in v6:
>   - Context conflicts, reflow the code.
>   - Use ARRAY_SIZE for power domains too.
> 
> Changes in v5:
>   - Change power domain name from 2d to core2.
> 
> Changes in v4:
>   - Add power domain names.
> 
> Changes in v3:
>   - Match mt8183-mali instead of bifrost, as we require special
>     handling for the 2 regulators and 3 power domains.
> 
>   drivers/gpu/drm/panfrost/panfrost_drv.c | 10 ++++++++++
>   1 file changed, 10 insertions(+)
> 
> diff --git a/drivers/gpu/drm/panfrost/panfrost_drv.c b/drivers/gpu/drm/panfrost/panfrost_drv.c
> index 83a461bdeea8..ca07098a6141 100644
> --- a/drivers/gpu/drm/panfrost/panfrost_drv.c
> +++ b/drivers/gpu/drm/panfrost/panfrost_drv.c
> @@ -665,6 +665,15 @@ static const struct panfrost_compatible amlogic_data = {
>   	.vendor_quirk = panfrost_gpu_amlogic_quirk,
>   };
>   
> +const char * const mediatek_mt8183_supplies[] = { "mali", "sram" };
> +const char * const mediatek_mt8183_pm_domains[] = { "core0", "core1", "core2" };
> +static const struct panfrost_compatible mediatek_mt8183_data = {
> +	.num_supplies = ARRAY_SIZE(mediatek_mt8183_supplies),
> +	.supply_names = mediatek_mt8183_supplies,
> +	.num_pm_domains = ARRAY_SIZE(mediatek_mt8183_pm_domains),
> +	.pm_domain_names = mediatek_mt8183_pm_domains,
> +};
> +
>   static const struct of_device_id dt_match[] = {
>   	/* Set first to probe before the generic compatibles */
>   	{ .compatible = "amlogic,meson-gxm-mali",
> @@ -681,6 +690,7 @@ static const struct of_device_id dt_match[] = {
>   	{ .compatible = "arm,mali-t860", .data = &default_data, },
>   	{ .compatible = "arm,mali-t880", .data = &default_data, },
>   	{ .compatible = "arm,mali-bifrost", .data = &default_data, },
> +	{ .compatible = "mediatek,mt8183-mali", .data = &mediatek_mt8183_data },
>   	{}
>   };
>   MODULE_DEVICE_TABLE(of, dt_match);
> 


_______________________________________________
Linux-mediatek mailing list
Linux-mediatek@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-mediatek

Re: [PATCH v10 0/4] drm/panfrost: Add support for mt8183 GPU

[Tomeu Vizoso]

On 1/13/21 7:06 AM, Nicolas Boichat wrote:
> Hi!
> 
> Follow-up on the v5 [1], things have gotten significantly
> better in the last 9 months, thanks to the efforts on Bifrost
> support by the Collabora team (and probably others I'm not
> aware of).
> 
> I've been testing this series on a MT8183/kukui device, with a
> chromeos-5.10 kernel [2], and got basic Chromium OS UI up with
> mesa 20.3.2 (lots of artifacts though).

Btw, don't know if you plan to retest with a newer Mesa, but a recent 
master should have pretty good ES 3.0 compliance on the Duet.

Cheers,

Tomeu

> devfreq is currently not supported, as we'll need:
>   - Clock core support for switching the GPU core clock (see 2/4).
>   - Platform-specific handling of the 2-regulator (see 3/4).
> 
> Since the latter is easy to detect, patch 3/4 just disables
> devfreq if the more than one regulator is specified in the
> compatible matching table.
> 
> [1] https://patchwork.kernel.org/project/linux-mediatek/cover/20200306041345.259332-1-drinkcat@chromium.org/
> [2] https://crrev.com/c/2608070
> 
> Changes in v10:
>   - Fix the binding to make sure sram-supply property can be provided.
> 
> Changes in v9:
>   - Explain why devfreq needs to be disabled for GPUs with >1
>     regulators.
> 
> Changes in v8:
>   - Use DRM_DEV_INFO instead of ERROR
> 
> Changes in v7:
>   - Fix GPU ID in commit message
>   - Fix GPU ID in commit message
> 
> Changes in v6:
>   - Rebased, actually tested with recent mesa driver.
> 
> Nicolas Boichat (4):
>    dt-bindings: gpu: mali-bifrost: Add Mediatek MT8183
>    arm64: dts: mt8183: Add node for the Mali GPU
>    drm/panfrost: devfreq: Disable devfreq when num_supplies > 1
>    drm/panfrost: Add mt8183-mali compatible string
> 
>   .../bindings/gpu/arm,mali-bifrost.yaml        |  28 +++++
>   arch/arm64/boot/dts/mediatek/mt8183-evb.dts   |   6 +
>   .../arm64/boot/dts/mediatek/mt8183-kukui.dtsi |   6 +
>   arch/arm64/boot/dts/mediatek/mt8183.dtsi      | 105 ++++++++++++++++++
>   drivers/gpu/drm/panfrost/panfrost_devfreq.c   |   9 ++
>   drivers/gpu/drm/panfrost/panfrost_drv.c       |  10 ++
>   6 files changed, 164 insertions(+)
> 

Re: [PATCH v10 0/4] drm/panfrost: Add support for mt8183 GPU

[Tomeu Vizoso]

On 1/13/21 7:06 AM, Nicolas Boichat wrote:
> Hi!
> 
> Follow-up on the v5 [1], things have gotten significantly
> better in the last 9 months, thanks to the efforts on Bifrost
> support by the Collabora team (and probably others I'm not
> aware of).
> 
> I've been testing this series on a MT8183/kukui device, with a
> chromeos-5.10 kernel [2], and got basic Chromium OS UI up with
> mesa 20.3.2 (lots of artifacts though).

Btw, don't know if you plan to retest with a newer Mesa, but a recent 
master should have pretty good ES 3.0 compliance on the Duet.

Cheers,

Tomeu

> devfreq is currently not supported, as we'll need:
>   - Clock core support for switching the GPU core clock (see 2/4).
>   - Platform-specific handling of the 2-regulator (see 3/4).
> 
> Since the latter is easy to detect, patch 3/4 just disables
> devfreq if the more than one regulator is specified in the
> compatible matching table.
> 
> [1] https://patchwork.kernel.org/project/linux-mediatek/cover/20200306041345.259332-1-drinkcat@chromium.org/
> [2] https://crrev.com/c/2608070
> 
> Changes in v10:
>   - Fix the binding to make sure sram-supply property can be provided.
> 
> Changes in v9:
>   - Explain why devfreq needs to be disabled for GPUs with >1
>     regulators.
> 
> Changes in v8:
>   - Use DRM_DEV_INFO instead of ERROR
> 
> Changes in v7:
>   - Fix GPU ID in commit message
>   - Fix GPU ID in commit message
> 
> Changes in v6:
>   - Rebased, actually tested with recent mesa driver.
> 
> Nicolas Boichat (4):
>    dt-bindings: gpu: mali-bifrost: Add Mediatek MT8183
>    arm64: dts: mt8183: Add node for the Mali GPU
>    drm/panfrost: devfreq: Disable devfreq when num_supplies > 1
>    drm/panfrost: Add mt8183-mali compatible string
> 
>   .../bindings/gpu/arm,mali-bifrost.yaml        |  28 +++++
>   arch/arm64/boot/dts/mediatek/mt8183-evb.dts   |   6 +
>   .../arm64/boot/dts/mediatek/mt8183-kukui.dtsi |   6 +
>   arch/arm64/boot/dts/mediatek/mt8183.dtsi      | 105 ++++++++++++++++++
>   drivers/gpu/drm/panfrost/panfrost_devfreq.c   |   9 ++
>   drivers/gpu/drm/panfrost/panfrost_drv.c       |  10 ++
>   6 files changed, 164 insertions(+)
> 
_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel

Re: [PATCH v10 0/4] drm/panfrost: Add support for mt8183 GPU

[Tomeu Vizoso]

On 1/13/21 7:06 AM, Nicolas Boichat wrote:
> Hi!
> 
> Follow-up on the v5 [1], things have gotten significantly
> better in the last 9 months, thanks to the efforts on Bifrost
> support by the Collabora team (and probably others I'm not
> aware of).
> 
> I've been testing this series on a MT8183/kukui device, with a
> chromeos-5.10 kernel [2], and got basic Chromium OS UI up with
> mesa 20.3.2 (lots of artifacts though).

Btw, don't know if you plan to retest with a newer Mesa, but a recent 
master should have pretty good ES 3.0 compliance on the Duet.

Cheers,

Tomeu

> devfreq is currently not supported, as we'll need:
>   - Clock core support for switching the GPU core clock (see 2/4).
>   - Platform-specific handling of the 2-regulator (see 3/4).
> 
> Since the latter is easy to detect, patch 3/4 just disables
> devfreq if the more than one regulator is specified in the
> compatible matching table.
> 
> [1] https://patchwork.kernel.org/project/linux-mediatek/cover/20200306041345.259332-1-drinkcat@chromium.org/
> [2] https://crrev.com/c/2608070
> 
> Changes in v10:
>   - Fix the binding to make sure sram-supply property can be provided.
> 
> Changes in v9:
>   - Explain why devfreq needs to be disabled for GPUs with >1
>     regulators.
> 
> Changes in v8:
>   - Use DRM_DEV_INFO instead of ERROR
> 
> Changes in v7:
>   - Fix GPU ID in commit message
>   - Fix GPU ID in commit message
> 
> Changes in v6:
>   - Rebased, actually tested with recent mesa driver.
> 
> Nicolas Boichat (4):
>    dt-bindings: gpu: mali-bifrost: Add Mediatek MT8183
>    arm64: dts: mt8183: Add node for the Mali GPU
>    drm/panfrost: devfreq: Disable devfreq when num_supplies > 1
>    drm/panfrost: Add mt8183-mali compatible string
> 
>   .../bindings/gpu/arm,mali-bifrost.yaml        |  28 +++++
>   arch/arm64/boot/dts/mediatek/mt8183-evb.dts   |   6 +
>   .../arm64/boot/dts/mediatek/mt8183-kukui.dtsi |   6 +
>   arch/arm64/boot/dts/mediatek/mt8183.dtsi      | 105 ++++++++++++++++++
>   drivers/gpu/drm/panfrost/panfrost_devfreq.c   |   9 ++
>   drivers/gpu/drm/panfrost/panfrost_drv.c       |  10 ++
>   6 files changed, 164 insertions(+)
> 

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

Re: [PATCH v10 0/4] drm/panfrost: Add support for mt8183 GPU

[Tomeu Vizoso]

On 1/13/21 7:06 AM, Nicolas Boichat wrote:
> Hi!
> 
> Follow-up on the v5 [1], things have gotten significantly
> better in the last 9 months, thanks to the efforts on Bifrost
> support by the Collabora team (and probably others I'm not
> aware of).
> 
> I've been testing this series on a MT8183/kukui device, with a
> chromeos-5.10 kernel [2], and got basic Chromium OS UI up with
> mesa 20.3.2 (lots of artifacts though).

Btw, don't know if you plan to retest with a newer Mesa, but a recent 
master should have pretty good ES 3.0 compliance on the Duet.

Cheers,

Tomeu

> devfreq is currently not supported, as we'll need:
>   - Clock core support for switching the GPU core clock (see 2/4).
>   - Platform-specific handling of the 2-regulator (see 3/4).
> 
> Since the latter is easy to detect, patch 3/4 just disables
> devfreq if the more than one regulator is specified in the
> compatible matching table.
> 
> [1] https://patchwork.kernel.org/project/linux-mediatek/cover/20200306041345.259332-1-drinkcat@chromium.org/
> [2] https://crrev.com/c/2608070
> 
> Changes in v10:
>   - Fix the binding to make sure sram-supply property can be provided.
> 
> Changes in v9:
>   - Explain why devfreq needs to be disabled for GPUs with >1
>     regulators.
> 
> Changes in v8:
>   - Use DRM_DEV_INFO instead of ERROR
> 
> Changes in v7:
>   - Fix GPU ID in commit message
>   - Fix GPU ID in commit message
> 
> Changes in v6:
>   - Rebased, actually tested with recent mesa driver.
> 
> Nicolas Boichat (4):
>    dt-bindings: gpu: mali-bifrost: Add Mediatek MT8183
>    arm64: dts: mt8183: Add node for the Mali GPU
>    drm/panfrost: devfreq: Disable devfreq when num_supplies > 1
>    drm/panfrost: Add mt8183-mali compatible string
> 
>   .../bindings/gpu/arm,mali-bifrost.yaml        |  28 +++++
>   arch/arm64/boot/dts/mediatek/mt8183-evb.dts   |   6 +
>   .../arm64/boot/dts/mediatek/mt8183-kukui.dtsi |   6 +
>   arch/arm64/boot/dts/mediatek/mt8183.dtsi      | 105 ++++++++++++++++++
>   drivers/gpu/drm/panfrost/panfrost_devfreq.c   |   9 ++
>   drivers/gpu/drm/panfrost/panfrost_drv.c       |  10 ++
>   6 files changed, 164 insertions(+)
> 

_______________________________________________
Linux-mediatek mailing list
Linux-mediatek@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-mediatek