* [GIT PULL 1/4] bcm2835-dt-next-2021-01-25
@ 2021-01-25 21:01 ` Nicolas Saenz Julienne
0 siblings, 0 replies; 16+ messages in thread
From: Nicolas Saenz Julienne @ 2021-01-25 21:01 UTC (permalink / raw)
To: Florian Fainelli
Cc: linux-arm-kernel, bcm-kernel-feedback-list, linux-kernel,
Nicolas Saenz Julienne, linux-rpi-kernel
Hi Florian,
The following changes since commit 5c8fe583cce542aa0b84adc939ce85293de36e5e:
Linux 5.11-rc1 (2020-12-27 15:30:22 -0800)
are available in the Git repository at:
https://git.kernel.org/pub/scm/linux/kernel/git/nsaenz/linux-rpi.git tags/bcm2835-dt-next-2021-01-25
for you to fetch changes up to 5878b8087904a5827c3551698be83da1ccf84e11:
ARM: dts: bcm2711: Add the BSC interrupt controller (2021-01-25 21:49:41 +0100)
----------------------------------------------------------------
Add DSI compatible string for Raspberry Pi 4
Enable BSC controller used for HDMI DCC
Add reserved memory node to expose Raspberry Pi 4's bootloader configuration
----------------------------------------------------------------
Dave Stevenson (1):
ARM: dts: bcm2711: Use compatible string for BCM2711 DSI1
Maxime Ripard (1):
ARM: dts: bcm2711: Add the BSC interrupt controller
Nicolas Saenz Julienne (1):
ARM: dts: bcm2711: Add reserved memory template to hold firmware configuration
arch/arm/boot/dts/bcm2711-rpi-4-b.dts | 17 +++++++++++++++++
arch/arm/boot/dts/bcm2711.dtsi | 13 +++++++++++++
2 files changed, 30 insertions(+)
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply [flat|nested] 16+ messages in thread* [GIT PULL 2/4] bcm2835-defconfig-next-2021-01-25
2021-01-25 21:01 ` Nicolas Saenz Julienne
@ 2021-01-25 21:01 ` Nicolas Saenz Julienne
-1 siblings, 0 replies; 16+ messages in thread
From: Nicolas Saenz Julienne @ 2021-01-25 21:01 UTC (permalink / raw)
To: Florian Fainelli
Cc: Nicolas Saenz Julienne, linux-kernel, bcm-kernel-feedback-list,
linux-rpi-kernel, linux-arm-kernel
Hi Florian,
The following changes since commit 5c8fe583cce542aa0b84adc939ce85293de36e5e:
Linux 5.11-rc1 (2020-12-27 15:30:22 -0800)
are available in the Git repository at:
https://git.kernel.org/pub/scm/linux/kernel/git/nsaenz/linux-rpi.git tags/bcm2835-defconfig-next-2021-01-25
for you to fetch changes up to 5462a35ce3e4748e079ee325a1e9bb436f4950b3:
ARM: multi_v7_defconfig: Enable nvmem's rmem driver (2021-01-25 21:57:33 +0100)
----------------------------------------------------------------
Enable NVMEM_RMEM as module to expose RPi4's bootloader configuration to
userspace
----------------------------------------------------------------
Nicolas Saenz Julienne (1):
ARM: multi_v7_defconfig: Enable nvmem's rmem driver
arch/arm/configs/multi_v7_defconfig | 1 +
1 file changed, 1 insertion(+)
^ permalink raw reply [flat|nested] 16+ messages in thread* [GIT PULL 2/4] bcm2835-defconfig-next-2021-01-25
@ 2021-01-25 21:01 ` Nicolas Saenz Julienne
0 siblings, 0 replies; 16+ messages in thread
From: Nicolas Saenz Julienne @ 2021-01-25 21:01 UTC (permalink / raw)
To: Florian Fainelli
Cc: linux-arm-kernel, bcm-kernel-feedback-list, linux-kernel,
Nicolas Saenz Julienne, linux-rpi-kernel
Hi Florian,
The following changes since commit 5c8fe583cce542aa0b84adc939ce85293de36e5e:
Linux 5.11-rc1 (2020-12-27 15:30:22 -0800)
are available in the Git repository at:
https://git.kernel.org/pub/scm/linux/kernel/git/nsaenz/linux-rpi.git tags/bcm2835-defconfig-next-2021-01-25
for you to fetch changes up to 5462a35ce3e4748e079ee325a1e9bb436f4950b3:
ARM: multi_v7_defconfig: Enable nvmem's rmem driver (2021-01-25 21:57:33 +0100)
----------------------------------------------------------------
Enable NVMEM_RMEM as module to expose RPi4's bootloader configuration to
userspace
----------------------------------------------------------------
Nicolas Saenz Julienne (1):
ARM: multi_v7_defconfig: Enable nvmem's rmem driver
arch/arm/configs/multi_v7_defconfig | 1 +
1 file changed, 1 insertion(+)
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply [flat|nested] 16+ messages in thread* Re: [GIT PULL 2/4] bcm2835-defconfig-next-2021-01-25
2021-01-25 21:01 ` Nicolas Saenz Julienne
@ 2021-01-26 17:57 ` Florian Fainelli
-1 siblings, 0 replies; 16+ messages in thread
From: Florian Fainelli @ 2021-01-26 17:57 UTC (permalink / raw)
To: Nicolas Saenz Julienne, Florian Fainelli
Cc: linux-kernel, bcm-kernel-feedback-list, linux-rpi-kernel,
linux-arm-kernel
On 1/25/2021 1:01 PM, Nicolas Saenz Julienne wrote:
> Hi Florian,
>
> The following changes since commit 5c8fe583cce542aa0b84adc939ce85293de36e5e:
>
> Linux 5.11-rc1 (2020-12-27 15:30:22 -0800)
>
> are available in the Git repository at:
>
> https://git.kernel.org/pub/scm/linux/kernel/git/nsaenz/linux-rpi.git tags/bcm2835-defconfig-next-2021-01-25
>
> for you to fetch changes up to 5462a35ce3e4748e079ee325a1e9bb436f4950b3:
>
> ARM: multi_v7_defconfig: Enable nvmem's rmem driver (2021-01-25 21:57:33 +0100)
>
> ----------------------------------------------------------------
> Enable NVMEM_RMEM as module to expose RPi4's bootloader configuration to
> userspace
>
> ----------------------------------------------------------------
Merged into defconfig/next, thanks Nicolas!
--
Florian
^ permalink raw reply [flat|nested] 16+ messages in thread
* Re: [GIT PULL 2/4] bcm2835-defconfig-next-2021-01-25
@ 2021-01-26 17:57 ` Florian Fainelli
0 siblings, 0 replies; 16+ messages in thread
From: Florian Fainelli @ 2021-01-26 17:57 UTC (permalink / raw)
To: Nicolas Saenz Julienne, Florian Fainelli
Cc: bcm-kernel-feedback-list, linux-kernel, linux-arm-kernel,
linux-rpi-kernel
On 1/25/2021 1:01 PM, Nicolas Saenz Julienne wrote:
> Hi Florian,
>
> The following changes since commit 5c8fe583cce542aa0b84adc939ce85293de36e5e:
>
> Linux 5.11-rc1 (2020-12-27 15:30:22 -0800)
>
> are available in the Git repository at:
>
> https://git.kernel.org/pub/scm/linux/kernel/git/nsaenz/linux-rpi.git tags/bcm2835-defconfig-next-2021-01-25
>
> for you to fetch changes up to 5462a35ce3e4748e079ee325a1e9bb436f4950b3:
>
> ARM: multi_v7_defconfig: Enable nvmem's rmem driver (2021-01-25 21:57:33 +0100)
>
> ----------------------------------------------------------------
> Enable NVMEM_RMEM as module to expose RPi4's bootloader configuration to
> userspace
>
> ----------------------------------------------------------------
Merged into defconfig/next, thanks Nicolas!
--
Florian
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply [flat|nested] 16+ messages in thread
* [GIT PULL 3/4] bcm2835-defconfig-arm64-next-2021-01-25
2021-01-25 21:01 ` Nicolas Saenz Julienne
@ 2021-01-25 21:01 ` Nicolas Saenz Julienne
-1 siblings, 0 replies; 16+ messages in thread
From: Nicolas Saenz Julienne @ 2021-01-25 21:01 UTC (permalink / raw)
To: Florian Fainelli
Cc: Nicolas Saenz Julienne, linux-kernel, bcm-kernel-feedback-list,
linux-rpi-kernel, linux-arm-kernel
Hi Florian,
The following changes since commit 5c8fe583cce542aa0b84adc939ce85293de36e5e:
Linux 5.11-rc1 (2020-12-27 15:30:22 -0800)
are available in the Git repository at:
https://git.kernel.org/pub/scm/linux/kernel/git/nsaenz/linux-rpi.git tags/bcm2835-defconfig-arm64-next-2021-01-25
for you to fetch changes up to b4192249b0c66e0ad177cdab87ea863220a7e455:
arm64: defconfig: Enable nvmem's rmem driver (2021-01-25 21:55:18 +0100)
----------------------------------------------------------------
Enable NVMEM_RMEM as module to expose RPi4's bootloader configuration to
userspace
----------------------------------------------------------------
Nicolas Saenz Julienne (1):
arm64: defconfig: Enable nvmem's rmem driver
arch/arm64/configs/defconfig | 1 +
1 file changed, 1 insertion(+)
^ permalink raw reply [flat|nested] 16+ messages in thread* [GIT PULL 3/4] bcm2835-defconfig-arm64-next-2021-01-25
@ 2021-01-25 21:01 ` Nicolas Saenz Julienne
0 siblings, 0 replies; 16+ messages in thread
From: Nicolas Saenz Julienne @ 2021-01-25 21:01 UTC (permalink / raw)
To: Florian Fainelli
Cc: linux-arm-kernel, bcm-kernel-feedback-list, linux-kernel,
Nicolas Saenz Julienne, linux-rpi-kernel
Hi Florian,
The following changes since commit 5c8fe583cce542aa0b84adc939ce85293de36e5e:
Linux 5.11-rc1 (2020-12-27 15:30:22 -0800)
are available in the Git repository at:
https://git.kernel.org/pub/scm/linux/kernel/git/nsaenz/linux-rpi.git tags/bcm2835-defconfig-arm64-next-2021-01-25
for you to fetch changes up to b4192249b0c66e0ad177cdab87ea863220a7e455:
arm64: defconfig: Enable nvmem's rmem driver (2021-01-25 21:55:18 +0100)
----------------------------------------------------------------
Enable NVMEM_RMEM as module to expose RPi4's bootloader configuration to
userspace
----------------------------------------------------------------
Nicolas Saenz Julienne (1):
arm64: defconfig: Enable nvmem's rmem driver
arch/arm64/configs/defconfig | 1 +
1 file changed, 1 insertion(+)
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply [flat|nested] 16+ messages in thread* Re: [GIT PULL 3/4] bcm2835-defconfig-arm64-next-2021-01-25
2021-01-25 21:01 ` Nicolas Saenz Julienne
@ 2021-01-26 17:57 ` Florian Fainelli
-1 siblings, 0 replies; 16+ messages in thread
From: Florian Fainelli @ 2021-01-26 17:57 UTC (permalink / raw)
To: Nicolas Saenz Julienne, Florian Fainelli
Cc: linux-kernel, bcm-kernel-feedback-list, linux-rpi-kernel,
linux-arm-kernel
On 1/25/2021 1:01 PM, Nicolas Saenz Julienne wrote:
> Hi Florian,
>
> The following changes since commit 5c8fe583cce542aa0b84adc939ce85293de36e5e:
>
> Linux 5.11-rc1 (2020-12-27 15:30:22 -0800)
>
> are available in the Git repository at:
>
> https://git.kernel.org/pub/scm/linux/kernel/git/nsaenz/linux-rpi.git tags/bcm2835-defconfig-arm64-next-2021-01-25
>
> for you to fetch changes up to b4192249b0c66e0ad177cdab87ea863220a7e455:
>
> arm64: defconfig: Enable nvmem's rmem driver (2021-01-25 21:55:18 +0100)
>
> ----------------------------------------------------------------
> Enable NVMEM_RMEM as module to expose RPi4's bootloader configuration to
> userspace
>
> ----------------------------------------------------------------
Merged into defconfig-arm64/next, thanks Nicolas!
--
Florian
^ permalink raw reply [flat|nested] 16+ messages in thread
* Re: [GIT PULL 3/4] bcm2835-defconfig-arm64-next-2021-01-25
@ 2021-01-26 17:57 ` Florian Fainelli
0 siblings, 0 replies; 16+ messages in thread
From: Florian Fainelli @ 2021-01-26 17:57 UTC (permalink / raw)
To: Nicolas Saenz Julienne, Florian Fainelli
Cc: bcm-kernel-feedback-list, linux-kernel, linux-arm-kernel,
linux-rpi-kernel
On 1/25/2021 1:01 PM, Nicolas Saenz Julienne wrote:
> Hi Florian,
>
> The following changes since commit 5c8fe583cce542aa0b84adc939ce85293de36e5e:
>
> Linux 5.11-rc1 (2020-12-27 15:30:22 -0800)
>
> are available in the Git repository at:
>
> https://git.kernel.org/pub/scm/linux/kernel/git/nsaenz/linux-rpi.git tags/bcm2835-defconfig-arm64-next-2021-01-25
>
> for you to fetch changes up to b4192249b0c66e0ad177cdab87ea863220a7e455:
>
> arm64: defconfig: Enable nvmem's rmem driver (2021-01-25 21:55:18 +0100)
>
> ----------------------------------------------------------------
> Enable NVMEM_RMEM as module to expose RPi4's bootloader configuration to
> userspace
>
> ----------------------------------------------------------------
Merged into defconfig-arm64/next, thanks Nicolas!
--
Florian
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply [flat|nested] 16+ messages in thread
* [GIT PULL 4/4] bcm2835-soc-next-2021-01-25
2021-01-25 21:01 ` Nicolas Saenz Julienne
@ 2021-01-25 21:01 ` Nicolas Saenz Julienne
-1 siblings, 0 replies; 16+ messages in thread
From: Nicolas Saenz Julienne @ 2021-01-25 21:01 UTC (permalink / raw)
To: Florian Fainelli
Cc: Nicolas Saenz Julienne, linux-kernel, bcm-kernel-feedback-list,
linux-rpi-kernel, linux-arm-kernel
Hi Florian,
The following changes since commit 5c8fe583cce542aa0b84adc939ce85293de36e5e:
Linux 5.11-rc1 (2020-12-27 15:30:22 -0800)
are available in the Git repository at:
https://git.kernel.org/pub/scm/linux/kernel/git/nsaenz/linux-rpi.git tags/bcm2835-soc-next-2021-01-25
for you to fetch changes up to 5674e314e674d5a7c4d38d8e9beed14b91ef04d3:
ARM: bcm: Select BRCMSTB_L2_IRQ for bcm2835 (2021-01-25 21:59:06 +0100)
----------------------------------------------------------------
Select BRCMSTB_L2_IRQ as it's now used on Raspberry Pi 4
----------------------------------------------------------------
Maxime Ripard (1):
ARM: bcm: Select BRCMSTB_L2_IRQ for bcm2835
arch/arm/mach-bcm/Kconfig | 1 +
arch/arm64/Kconfig.platforms | 1 +
2 files changed, 2 insertions(+)
^ permalink raw reply [flat|nested] 16+ messages in thread* [GIT PULL 4/4] bcm2835-soc-next-2021-01-25
@ 2021-01-25 21:01 ` Nicolas Saenz Julienne
0 siblings, 0 replies; 16+ messages in thread
From: Nicolas Saenz Julienne @ 2021-01-25 21:01 UTC (permalink / raw)
To: Florian Fainelli
Cc: linux-arm-kernel, bcm-kernel-feedback-list, linux-kernel,
Nicolas Saenz Julienne, linux-rpi-kernel
Hi Florian,
The following changes since commit 5c8fe583cce542aa0b84adc939ce85293de36e5e:
Linux 5.11-rc1 (2020-12-27 15:30:22 -0800)
are available in the Git repository at:
https://git.kernel.org/pub/scm/linux/kernel/git/nsaenz/linux-rpi.git tags/bcm2835-soc-next-2021-01-25
for you to fetch changes up to 5674e314e674d5a7c4d38d8e9beed14b91ef04d3:
ARM: bcm: Select BRCMSTB_L2_IRQ for bcm2835 (2021-01-25 21:59:06 +0100)
----------------------------------------------------------------
Select BRCMSTB_L2_IRQ as it's now used on Raspberry Pi 4
----------------------------------------------------------------
Maxime Ripard (1):
ARM: bcm: Select BRCMSTB_L2_IRQ for bcm2835
arch/arm/mach-bcm/Kconfig | 1 +
arch/arm64/Kconfig.platforms | 1 +
2 files changed, 2 insertions(+)
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply [flat|nested] 16+ messages in thread* Re: [GIT PULL 4/4] bcm2835-soc-next-2021-01-25
2021-01-25 21:01 ` Nicolas Saenz Julienne
@ 2021-01-26 17:58 ` Florian Fainelli
-1 siblings, 0 replies; 16+ messages in thread
From: Florian Fainelli @ 2021-01-26 17:58 UTC (permalink / raw)
To: Nicolas Saenz Julienne, Florian Fainelli
Cc: linux-kernel, bcm-kernel-feedback-list, linux-rpi-kernel,
linux-arm-kernel
On 1/25/2021 1:01 PM, Nicolas Saenz Julienne wrote:
> Hi Florian,
>
> The following changes since commit 5c8fe583cce542aa0b84adc939ce85293de36e5e:
>
> Linux 5.11-rc1 (2020-12-27 15:30:22 -0800)
>
> are available in the Git repository at:
>
> https://git.kernel.org/pub/scm/linux/kernel/git/nsaenz/linux-rpi.git tags/bcm2835-soc-next-2021-01-25
>
> for you to fetch changes up to 5674e314e674d5a7c4d38d8e9beed14b91ef04d3:
>
> ARM: bcm: Select BRCMSTB_L2_IRQ for bcm2835 (2021-01-25 21:59:06 +0100)
>
> ----------------------------------------------------------------
> Select BRCMSTB_L2_IRQ as it's now used on Raspberry Pi 4
>
> ----------------------------------------------------------------
Merged into soc/next, thanks Nicolas!
--
Florian
^ permalink raw reply [flat|nested] 16+ messages in thread
* Re: [GIT PULL 4/4] bcm2835-soc-next-2021-01-25
@ 2021-01-26 17:58 ` Florian Fainelli
0 siblings, 0 replies; 16+ messages in thread
From: Florian Fainelli @ 2021-01-26 17:58 UTC (permalink / raw)
To: Nicolas Saenz Julienne, Florian Fainelli
Cc: bcm-kernel-feedback-list, linux-kernel, linux-arm-kernel,
linux-rpi-kernel
On 1/25/2021 1:01 PM, Nicolas Saenz Julienne wrote:
> Hi Florian,
>
> The following changes since commit 5c8fe583cce542aa0b84adc939ce85293de36e5e:
>
> Linux 5.11-rc1 (2020-12-27 15:30:22 -0800)
>
> are available in the Git repository at:
>
> https://git.kernel.org/pub/scm/linux/kernel/git/nsaenz/linux-rpi.git tags/bcm2835-soc-next-2021-01-25
>
> for you to fetch changes up to 5674e314e674d5a7c4d38d8e9beed14b91ef04d3:
>
> ARM: bcm: Select BRCMSTB_L2_IRQ for bcm2835 (2021-01-25 21:59:06 +0100)
>
> ----------------------------------------------------------------
> Select BRCMSTB_L2_IRQ as it's now used on Raspberry Pi 4
>
> ----------------------------------------------------------------
Merged into soc/next, thanks Nicolas!
--
Florian
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply [flat|nested] 16+ messages in thread
* Re: [GIT PULL 1/4] bcm2835-dt-next-2021-01-25
2021-01-25 21:01 ` Nicolas Saenz Julienne
@ 2021-01-26 17:57 ` Florian Fainelli
-1 siblings, 0 replies; 16+ messages in thread
From: Florian Fainelli @ 2021-01-26 17:57 UTC (permalink / raw)
To: Nicolas Saenz Julienne, Florian Fainelli
Cc: linux-kernel, bcm-kernel-feedback-list, linux-rpi-kernel,
linux-arm-kernel
On 1/25/2021 1:01 PM, Nicolas Saenz Julienne wrote:
> Hi Florian,
>
> The following changes since commit 5c8fe583cce542aa0b84adc939ce85293de36e5e:
>
> Linux 5.11-rc1 (2020-12-27 15:30:22 -0800)
>
> are available in the Git repository at:
>
> https://git.kernel.org/pub/scm/linux/kernel/git/nsaenz/linux-rpi.git tags/bcm2835-dt-next-2021-01-25
>
> for you to fetch changes up to 5878b8087904a5827c3551698be83da1ccf84e11:
>
> ARM: dts: bcm2711: Add the BSC interrupt controller (2021-01-25 21:49:41 +0100)
>
> ----------------------------------------------------------------
> Add DSI compatible string for Raspberry Pi 4
>
> Enable BSC controller used for HDMI DCC
>
> Add reserved memory node to expose Raspberry Pi 4's bootloader configuration
>
> ----------------------------------------------------------------
Merged into devicetree/next, thanks Nicolas!
--
Florian
^ permalink raw reply [flat|nested] 16+ messages in thread
* Re: [GIT PULL 1/4] bcm2835-dt-next-2021-01-25
@ 2021-01-26 17:57 ` Florian Fainelli
0 siblings, 0 replies; 16+ messages in thread
From: Florian Fainelli @ 2021-01-26 17:57 UTC (permalink / raw)
To: Nicolas Saenz Julienne, Florian Fainelli
Cc: bcm-kernel-feedback-list, linux-kernel, linux-arm-kernel,
linux-rpi-kernel
On 1/25/2021 1:01 PM, Nicolas Saenz Julienne wrote:
> Hi Florian,
>
> The following changes since commit 5c8fe583cce542aa0b84adc939ce85293de36e5e:
>
> Linux 5.11-rc1 (2020-12-27 15:30:22 -0800)
>
> are available in the Git repository at:
>
> https://git.kernel.org/pub/scm/linux/kernel/git/nsaenz/linux-rpi.git tags/bcm2835-dt-next-2021-01-25
>
> for you to fetch changes up to 5878b8087904a5827c3551698be83da1ccf84e11:
>
> ARM: dts: bcm2711: Add the BSC interrupt controller (2021-01-25 21:49:41 +0100)
>
> ----------------------------------------------------------------
> Add DSI compatible string for Raspberry Pi 4
>
> Enable BSC controller used for HDMI DCC
>
> Add reserved memory node to expose Raspberry Pi 4's bootloader configuration
>
> ----------------------------------------------------------------
Merged into devicetree/next, thanks Nicolas!
--
Florian
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply [flat|nested] 16+ messages in thread