[PATCH v2 00/25] Convert CMSDK timer, watchdog, dualtimer to Clock framework

[PATCH v2 00/25] Convert CMSDK timer, watchdog, dualtimer to Clock framework

[Peter Maydell]

This patchset converts the CMSDK timer, watchdog and dualtimer devices
to use the Clock framework instead of an integer property specifying
a frequency in Hz. The series is quito a lot of patches but they
should be mostly small and I hope easy to review.

The motivation here is the upcoming Arm SSE-300 model: this has a
new kind of timer device, which I wanted to write in the modern style
with a Clock input. That meant the ARMSSE container object needed
to know about Clocks, so converting the existing devices it used
to Clocks seemed like a good first step.

The series as a whole is a migration compat break for the machines
involved: mps2-an385, mps2-an386, mps2-an500, mps2-an511, mps2-an505,
mps2-an521, musca-a, musca-b1, lm3s811evb, lm3s6965evb.

v1->v2 changes (all very minor so I have left r-by tags in place):
 * in test cases, remove set-but-never-used QTestState* variables; gcc
   warns about these (I did my development with clang, which does not...)
   (patches 3, 4, 5)
 * in test cases, consistently phrase clock_step() arguments as calculations
   based on tick counts and the ns-per-tick value rather than just the final
   numbers (eg '500 * 40 + 1' instead of '20001') (patches 3, 5)
 * correct the forward-step amount when looking for periodic timer reload
   of the dualtimer (patch 5)
 * actually wire up the ARMSSE MAINCLK callback function (patch 22)

The only patch still unreviewed is 5 ("tests: Add a simple test of the
CMSDK APB dual timer").

thanks
-- PMM

Peter Maydell (25):
  ptimer: Add new ptimer_set_period_from_clock() function
  clock: Add new clock_has_source() function
  tests: Add a simple test of the CMSDK APB timer
  tests: Add a simple test of the CMSDK APB watchdog
  tests: Add a simple test of the CMSDK APB dual timer
  hw/timer/cmsdk-apb-timer: Rename CMSDKAPBTIMER struct to CMSDKAPBTimer
  hw/timer/cmsdk-apb-timer: Add Clock input
  hw/timer/cmsdk-apb-dualtimer: Add Clock input
  hw/watchdog/cmsdk-apb-watchdog: Add Clock input
  hw/arm/armsse: Rename "MAINCLK" property to "MAINCLK_FRQ"
  hw/arm/armsse: Wire up clocks
  hw/arm/mps2: Inline CMSDK_APB_TIMER creation
  hw/arm/mps2: Create and connect SYSCLK Clock
  hw/arm/mps2-tz: Create and connect ARMSSE Clocks
  hw/arm/musca: Create and connect ARMSSE Clocks
  hw/arm/stellaris: Convert SSYS to QOM device
  hw/arm/stellaris: Create Clock input for watchdog
  hw/timer/cmsdk-apb-timer: Convert to use Clock input
  hw/timer/cmsdk-apb-dualtimer: Convert to use Clock input
  hw/watchdog/cmsdk-apb-watchdog: Convert to use Clock input
  tests/qtest/cmsdk-apb-watchdog-test: Test clock changes
  hw/arm/armsse: Use Clock to set system_clock_scale
  arm: Don't set freq properties on CMSDK timer, dualtimer, watchdog,
    ARMSSE
  arm: Remove frq properties on CMSDK timer, dualtimer, watchdog, ARMSSE
  hw/arm/stellaris: Remove board-creation reset of STELLARIS_SYS

 docs/devel/clocks.rst                    |  16 +++
 include/hw/arm/armsse.h                  |  14 +-
 include/hw/clock.h                       |  15 ++
 include/hw/ptimer.h                      |  22 +++
 include/hw/timer/cmsdk-apb-dualtimer.h   |   5 +-
 include/hw/timer/cmsdk-apb-timer.h       |  34 ++---
 include/hw/watchdog/cmsdk-apb-watchdog.h |   5 +-
 include/qemu/typedefs.h                  |   1 +
 hw/arm/armsse.c                          |  48 +++++--
 hw/arm/mps2-tz.c                         |  14 +-
 hw/arm/mps2.c                            |  28 +++-
 hw/arm/musca.c                           |  13 +-
 hw/arm/stellaris.c                       | 170 +++++++++++++++++------
 hw/core/ptimer.c                         |  34 +++++
 hw/timer/cmsdk-apb-dualtimer.c           |  53 +++++--
 hw/timer/cmsdk-apb-timer.c               |  55 ++++----
 hw/watchdog/cmsdk-apb-watchdog.c         |  29 ++--
 tests/qtest/cmsdk-apb-dualtimer-test.c   | 130 +++++++++++++++++
 tests/qtest/cmsdk-apb-timer-test.c       |  75 ++++++++++
 tests/qtest/cmsdk-apb-watchdog-test.c    | 131 +++++++++++++++++
 MAINTAINERS                              |   3 +
 tests/qtest/meson.build                  |   3 +
 22 files changed, 756 insertions(+), 142 deletions(-)
 create mode 100644 tests/qtest/cmsdk-apb-dualtimer-test.c
 create mode 100644 tests/qtest/cmsdk-apb-timer-test.c
 create mode 100644 tests/qtest/cmsdk-apb-watchdog-test.c

-- 
2.20.1

[PATCH v2 01/25] ptimer: Add new ptimer_set_period_from_clock() function

[Peter Maydell]

The ptimer API currently provides two methods for setting the period:
ptimer_set_period(), which takes a period in nanoseconds, and
ptimer_set_freq(), which takes a frequency in Hz.  Neither of these
lines up nicely with the Clock API, because although both the Clock
and the ptimer track the frequency using a representation of whole
and fractional nanoseconds, conversion via either period-in-ns or
frequency-in-Hz will introduce a rounding error.

Add a new function ptimer_set_period_from_clock() which takes the
Clock object directly to avoid the rounding issues.  This includes a
facility for the user to specify that there is a frequency divider
between the Clock proper and the timer, as some timer devices like
the CMSDK APB dualtimer need this.

To avoid having to drag in clock.h from ptimer.h we add the Clock
type to typedefs.h.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Luc Michel <luc@lmichel.fr>
Message-id: 20210121190622.22000-2-peter.maydell@linaro.org
---
 include/hw/ptimer.h     | 22 ++++++++++++++++++++++
 include/qemu/typedefs.h |  1 +
 hw/core/ptimer.c        | 34 ++++++++++++++++++++++++++++++++++
 3 files changed, 57 insertions(+)

diff --git a/include/hw/ptimer.h b/include/hw/ptimer.h
index 412763fffb2..c443218475b 100644
--- a/include/hw/ptimer.h
+++ b/include/hw/ptimer.h
@@ -165,6 +165,28 @@ void ptimer_transaction_commit(ptimer_state *s);
  */
 void ptimer_set_period(ptimer_state *s, int64_t period);
 
+/**
+ * ptimer_set_period_from_clock - Set counter increment from a Clock
+ * @s: ptimer to configure
+ * @clk: pointer to Clock object to take period from
+ * @divisor: value to scale the clock frequency down by
+ *
+ * If the ptimer is being driven from a Clock, this is the preferred
+ * way to tell the ptimer about the period, because it avoids any
+ * possible rounding errors that might happen if the internal
+ * representation of the Clock period was converted to either a period
+ * in ns or a frequency in Hz.
+ *
+ * If the ptimer should run at the same frequency as the clock,
+ * pass 1 as the @divisor; if the ptimer should run at half the
+ * frequency, pass 2, and so on.
+ *
+ * This function will assert if it is called outside a
+ * ptimer_transaction_begin/commit block.
+ */
+void ptimer_set_period_from_clock(ptimer_state *s, const Clock *clock,
+                                  unsigned int divisor);
+
 /**
  * ptimer_set_freq - Set counter frequency in Hz
  * @s: ptimer to configure
diff --git a/include/qemu/typedefs.h b/include/qemu/typedefs.h
index 976b529dfb5..68deb74ef6f 100644
--- a/include/qemu/typedefs.h
+++ b/include/qemu/typedefs.h
@@ -34,6 +34,7 @@ typedef struct BlockDriverState BlockDriverState;
 typedef struct BusClass BusClass;
 typedef struct BusState BusState;
 typedef struct Chardev Chardev;
+typedef struct Clock Clock;
 typedef struct CompatProperty CompatProperty;
 typedef struct CoMutex CoMutex;
 typedef struct CPUAddressSpace CPUAddressSpace;
diff --git a/hw/core/ptimer.c b/hw/core/ptimer.c
index 2aa97cb665c..6ba19fd9658 100644
--- a/hw/core/ptimer.c
+++ b/hw/core/ptimer.c
@@ -15,6 +15,7 @@
 #include "sysemu/qtest.h"
 #include "block/aio.h"
 #include "sysemu/cpus.h"
+#include "hw/clock.h"
 
 #define DELTA_ADJUST     1
 #define DELTA_NO_ADJUST -1
@@ -348,6 +349,39 @@ void ptimer_set_period(ptimer_state *s, int64_t period)
     }
 }
 
+/* Set counter increment interval from a Clock */
+void ptimer_set_period_from_clock(ptimer_state *s, const Clock *clk,
+                                  unsigned int divisor)
+{
+    /*
+     * The raw clock period is a 64-bit value in units of 2^-32 ns;
+     * put another way it's a 32.32 fixed-point ns value. Our internal
+     * representation of the period is 64.32 fixed point ns, so
+     * the conversion is simple.
+     */
+    uint64_t raw_period = clock_get(clk);
+    uint64_t period_frac;
+
+    assert(s->in_transaction);
+    s->delta = ptimer_get_count(s);
+    s->period = extract64(raw_period, 32, 32);
+    period_frac = extract64(raw_period, 0, 32);
+    /*
+     * divisor specifies a possible frequency divisor between the
+     * clock and the timer, so it is a multiplier on the period.
+     * We do the multiply after splitting the raw period out into
+     * period and frac to avoid having to do a 32*64->96 multiply.
+     */
+    s->period *= divisor;
+    period_frac *= divisor;
+    s->period += extract64(period_frac, 32, 32);
+    s->period_frac = (uint32_t)period_frac;
+
+    if (s->enabled) {
+        s->need_reload = true;
+    }
+}
+
 /* Set counter frequency in Hz.  */
 void ptimer_set_freq(ptimer_state *s, uint32_t freq)
 {
-- 
2.20.1

Re: [PATCH v2 01/25] ptimer: Add new ptimer_set_period_from_clock() function

[Philippe Mathieu-Daudé]

On 1/28/21 12:41 PM, Peter Maydell wrote:
> The ptimer API currently provides two methods for setting the period:
> ptimer_set_period(), which takes a period in nanoseconds, and
> ptimer_set_freq(), which takes a frequency in Hz.  Neither of these
> lines up nicely with the Clock API, because although both the Clock
> and the ptimer track the frequency using a representation of whole
> and fractional nanoseconds, conversion via either period-in-ns or
> frequency-in-Hz will introduce a rounding error.
> 
> Add a new function ptimer_set_period_from_clock() which takes the
> Clock object directly to avoid the rounding issues.  This includes a
> facility for the user to specify that there is a frequency divider
> between the Clock proper and the timer, as some timer devices like
> the CMSDK APB dualtimer need this.
> 
> To avoid having to drag in clock.h from ptimer.h we add the Clock
> type to typedefs.h.
> 
> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
> Reviewed-by: Luc Michel <luc@lmichel.fr>
> Message-id: 20210121190622.22000-2-peter.maydell@linaro.org
> ---
>  include/hw/ptimer.h     | 22 ++++++++++++++++++++++
>  include/qemu/typedefs.h |  1 +
>  hw/core/ptimer.c        | 34 ++++++++++++++++++++++++++++++++++
>  3 files changed, 57 insertions(+)

Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>

[PATCH v2 02/25] clock: Add new clock_has_source() function

[Peter Maydell]

Add a function for checking whether a clock has a source.  This is
useful for devices which have input clocks that must be wired up by
the board as it allows them to fail in realize rather than ploughing
on with a zero-period clock.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Luc Michel <luc@lmichel.fr>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-id: 20210121190622.22000-3-peter.maydell@linaro.org
---
 docs/devel/clocks.rst | 16 ++++++++++++++++
 include/hw/clock.h    | 15 +++++++++++++++
 2 files changed, 31 insertions(+)

diff --git a/docs/devel/clocks.rst b/docs/devel/clocks.rst
index 2548d842322..c54bbb82409 100644
--- a/docs/devel/clocks.rst
+++ b/docs/devel/clocks.rst
@@ -235,6 +235,22 @@ object during device instance init. For example:
     /* set initial value to 10ns / 100MHz */
     clock_set_ns(clk, 10);
 
+To enforce that the clock is wired up by the board code, you can
+call ``clock_has_source()`` in your device's realize method:
+
+.. code-block:: c
+
+   if (!clock_has_source(s->clk)) {
+       error_setg(errp, "MyDevice: clk input must be connected");
+       return;
+   }
+
+Note that this only checks that the clock has been wired up; it is
+still possible that the output clock connected to it is disabled
+or has not yet been configured, in which case the period will be
+zero. You should use the clock callback to find out when the clock
+period changes.
+
 Fetching clock frequency/period
 -------------------------------
 
diff --git a/include/hw/clock.h b/include/hw/clock.h
index 6382f346569..e5f45e2626d 100644
--- a/include/hw/clock.h
+++ b/include/hw/clock.h
@@ -139,6 +139,21 @@ void clock_clear_callback(Clock *clk);
  */
 void clock_set_source(Clock *clk, Clock *src);
 
+/**
+ * clock_has_source:
+ * @clk: the clock
+ *
+ * Returns true if the clock has a source clock connected to it.
+ * This is useful for devices which have input clocks which must
+ * be connected by the board/SoC code which creates them. The
+ * device code can use this to check in its realize method that
+ * the clock has been connected.
+ */
+static inline bool clock_has_source(const Clock *clk)
+{
+    return clk->source != NULL;
+}
+
 /**
  * clock_set:
  * @clk: the clock to initialize.
-- 
2.20.1

[PATCH v2 03/25] tests: Add a simple test of the CMSDK APB timer

[Peter Maydell]

Add a simple test of the CMSDK APB timer, since we're about to do
some refactoring of how it is clocked.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Luc Michel <luc@lmichel.fr>
Message-id: 20210121190622.22000-4-peter.maydell@linaro.org
---
v1->v2 changes:
 - phrase various clock_step() arguments as calculations
   based on tick counts and the ns-per-tick value rather
   than just the final numbers
 - remove set-but-not-used QTestState *s variable
   that gcc warns about but clang does not
---
 tests/qtest/cmsdk-apb-timer-test.c | 75 ++++++++++++++++++++++++++++++
 MAINTAINERS                        |  1 +
 tests/qtest/meson.build            |  1 +
 3 files changed, 77 insertions(+)
 create mode 100644 tests/qtest/cmsdk-apb-timer-test.c

diff --git a/tests/qtest/cmsdk-apb-timer-test.c b/tests/qtest/cmsdk-apb-timer-test.c
new file mode 100644
index 00000000000..e85e1f7448e
--- /dev/null
+++ b/tests/qtest/cmsdk-apb-timer-test.c
@@ -0,0 +1,75 @@
+/*
+ * QTest testcase for the CMSDK APB timer device
+ *
+ * Copyright (c) 2021 Linaro Limited
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
+ * for more details.
+ */
+
+#include "qemu/osdep.h"
+#include "libqtest-single.h"
+
+/* IoTKit/ARMSSE-200 timer0; driven at 25MHz in mps2-an385, so 40ns per tick */
+#define TIMER_BASE 0x40000000
+
+#define CTRL 0
+#define VALUE 4
+#define RELOAD 8
+#define INTSTATUS 0xc
+
+static void test_timer(void)
+{
+    g_assert_true(readl(TIMER_BASE + INTSTATUS) == 0);
+
+    /* Start timer: will fire after 40 * 1000 == 40000 ns */
+    writel(TIMER_BASE + RELOAD, 1000);
+    writel(TIMER_BASE + CTRL, 9);
+
+    /* Step to just past the 500th tick and check VALUE */
+    clock_step(40 * 500 + 1);
+    g_assert_cmpuint(readl(TIMER_BASE + INTSTATUS), ==, 0);
+    g_assert_cmpuint(readl(TIMER_BASE + VALUE), ==, 500);
+
+    /* Just past the 1000th tick: timer should have fired */
+    clock_step(40 * 500);
+    g_assert_cmpuint(readl(TIMER_BASE + INTSTATUS), ==, 1);
+    g_assert_cmpuint(readl(TIMER_BASE + VALUE), ==, 0);
+
+    /* VALUE reloads at the following tick */
+    clock_step(40);
+    g_assert_cmpuint(readl(TIMER_BASE + VALUE), ==, 1000);
+
+    /* Check write-1-to-clear behaviour of INTSTATUS */
+    writel(TIMER_BASE + INTSTATUS, 0);
+    g_assert_cmpuint(readl(TIMER_BASE + INTSTATUS), ==, 1);
+    writel(TIMER_BASE + INTSTATUS, 1);
+    g_assert_cmpuint(readl(TIMER_BASE + INTSTATUS), ==, 0);
+
+    /* Turn off the timer */
+    writel(TIMER_BASE + CTRL, 0);
+}
+
+int main(int argc, char **argv)
+{
+    int r;
+
+    g_test_init(&argc, &argv, NULL);
+
+    qtest_start("-machine mps2-an385");
+
+    qtest_add_func("/cmsdk-apb-timer/timer", test_timer);
+
+    r = g_test_run();
+
+    qtest_end();
+
+    return r;
+}
diff --git a/MAINTAINERS b/MAINTAINERS
index 34359a99b8e..6c15f7db317 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -581,6 +581,7 @@ F: include/hw/rtc/pl031.h
 F: include/hw/arm/primecell.h
 F: hw/timer/cmsdk-apb-timer.c
 F: include/hw/timer/cmsdk-apb-timer.h
+F: tests/qtest/cmsdk-apb-timer-test.c
 F: hw/timer/cmsdk-apb-dualtimer.c
 F: include/hw/timer/cmsdk-apb-dualtimer.h
 F: hw/char/cmsdk-apb-uart.c
diff --git a/tests/qtest/meson.build b/tests/qtest/meson.build
index 16d04625b8b..74addd74868 100644
--- a/tests/qtest/meson.build
+++ b/tests/qtest/meson.build
@@ -141,6 +141,7 @@ qtests_npcm7xx = \
    'npcm7xx_timer-test',
    'npcm7xx_watchdog_timer-test']
 qtests_arm = \
+  (config_all_devices.has_key('CONFIG_CMSDK_APB_TIMER') ? ['cmsdk-apb-timer-test'] : []) + \
   (config_all_devices.has_key('CONFIG_PFLASH_CFI02') ? ['pflash-cfi02-test'] : []) +         \
   (config_all_devices.has_key('CONFIG_NPCM7XX') ? qtests_npcm7xx : []) + \
   ['arm-cpu-features',
-- 
2.20.1

[PATCH v2 04/25] tests: Add a simple test of the CMSDK APB watchdog

[Peter Maydell]

Add a simple test of the CMSDK watchdog, since we're about to do some
refactoring of how it is clocked.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Luc Michel <luc@lmichel.fr>
Message-id: 20210121190622.22000-5-peter.maydell@linaro.org
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
---
v1->v2 changes:
 - remove set-but-not-used QTestState *s variable
---
 tests/qtest/cmsdk-apb-watchdog-test.c | 79 +++++++++++++++++++++++++++
 MAINTAINERS                           |  1 +
 tests/qtest/meson.build               |  1 +
 3 files changed, 81 insertions(+)
 create mode 100644 tests/qtest/cmsdk-apb-watchdog-test.c

diff --git a/tests/qtest/cmsdk-apb-watchdog-test.c b/tests/qtest/cmsdk-apb-watchdog-test.c
new file mode 100644
index 00000000000..950f64c527b
--- /dev/null
+++ b/tests/qtest/cmsdk-apb-watchdog-test.c
@@ -0,0 +1,79 @@
+/*
+ * QTest testcase for the CMSDK APB watchdog device
+ *
+ * Copyright (c) 2021 Linaro Limited
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
+ * for more details.
+ */
+
+#include "qemu/osdep.h"
+#include "libqtest-single.h"
+
+/*
+ * lm3s811evb watchdog; at board startup this runs at 200MHz / 16 == 12.5MHz,
+ * which is 80ns per tick.
+ */
+#define WDOG_BASE 0x40000000
+
+#define WDOGLOAD 0
+#define WDOGVALUE 4
+#define WDOGCONTROL 8
+#define WDOGINTCLR 0xc
+#define WDOGRIS 0x10
+#define WDOGMIS 0x14
+#define WDOGLOCK 0xc00
+
+static void test_watchdog(void)
+{
+    g_assert_cmpuint(readl(WDOG_BASE + WDOGRIS), ==, 0);
+
+    writel(WDOG_BASE + WDOGCONTROL, 1);
+    writel(WDOG_BASE + WDOGLOAD, 1000);
+
+    /* Step to just past the 500th tick */
+    clock_step(500 * 80 + 1);
+    g_assert_cmpuint(readl(WDOG_BASE + WDOGRIS), ==, 0);
+    g_assert_cmpuint(readl(WDOG_BASE + WDOGVALUE), ==, 500);
+
+    /* Just past the 1000th tick: timer should have fired */
+    clock_step(500 * 80);
+    g_assert_cmpuint(readl(WDOG_BASE + WDOGRIS), ==, 1);
+    g_assert_cmpuint(readl(WDOG_BASE + WDOGVALUE), ==, 0);
+
+    /* VALUE reloads at following tick */
+    clock_step(80);
+    g_assert_cmpuint(readl(WDOG_BASE + WDOGVALUE), ==, 1000);
+
+    /* Writing any value to WDOGINTCLR clears the interrupt and reloads */
+    clock_step(500 * 80);
+    g_assert_cmpuint(readl(WDOG_BASE + WDOGVALUE), ==, 500);
+    g_assert_cmpuint(readl(WDOG_BASE + WDOGRIS), ==, 1);
+    writel(WDOG_BASE + WDOGINTCLR, 0);
+    g_assert_cmpuint(readl(WDOG_BASE + WDOGVALUE), ==, 1000);
+    g_assert_cmpuint(readl(WDOG_BASE + WDOGRIS), ==, 0);
+}
+
+int main(int argc, char **argv)
+{
+    int r;
+
+    g_test_init(&argc, &argv, NULL);
+
+    qtest_start("-machine lm3s811evb");
+
+    qtest_add_func("/cmsdk-apb-watchdog/watchdog", test_watchdog);
+
+    r = g_test_run();
+
+    qtest_end();
+
+    return r;
+}
diff --git a/MAINTAINERS b/MAINTAINERS
index 6c15f7db317..3729b89f359 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -588,6 +588,7 @@ F: hw/char/cmsdk-apb-uart.c
 F: include/hw/char/cmsdk-apb-uart.h
 F: hw/watchdog/cmsdk-apb-watchdog.c
 F: include/hw/watchdog/cmsdk-apb-watchdog.h
+F: tests/qtest/cmsdk-apb-watchdog-test.c
 F: hw/misc/tz-ppc.c
 F: include/hw/misc/tz-ppc.h
 F: hw/misc/tz-mpc.c
diff --git a/tests/qtest/meson.build b/tests/qtest/meson.build
index 74addd74868..9e2ebc47041 100644
--- a/tests/qtest/meson.build
+++ b/tests/qtest/meson.build
@@ -142,6 +142,7 @@ qtests_npcm7xx = \
    'npcm7xx_watchdog_timer-test']
 qtests_arm = \
   (config_all_devices.has_key('CONFIG_CMSDK_APB_TIMER') ? ['cmsdk-apb-timer-test'] : []) + \
+  (config_all_devices.has_key('CONFIG_CMSDK_APB_WATCHDOG') ? ['cmsdk-apb-watchdog-test'] : []) + \
   (config_all_devices.has_key('CONFIG_PFLASH_CFI02') ? ['pflash-cfi02-test'] : []) +         \
   (config_all_devices.has_key('CONFIG_NPCM7XX') ? qtests_npcm7xx : []) + \
   ['arm-cpu-features',
-- 
2.20.1

[PATCH v2 05/25] tests: Add a simple test of the CMSDK APB dual timer

[Peter Maydell]

Add a simple test of the CMSDK dual timer, since we're about to do
some refactoring of how it is clocked.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20210121190622.22000-6-peter.maydell@linaro.org
---
v1->v2 changes:
 - phrase various clock_step() arguments as calculations
   based on tick counts and the ns-per-tick value rather
   than just the final numbers
 - remove set-but-not-used QTestState *s variable
   that gcc warns about but clang does not
 - use 40 * 256 in test_prescale() as suggested by Luc
---
 tests/qtest/cmsdk-apb-dualtimer-test.c | 130 +++++++++++++++++++++++++
 MAINTAINERS                            |   1 +
 tests/qtest/meson.build                |   1 +
 3 files changed, 132 insertions(+)
 create mode 100644 tests/qtest/cmsdk-apb-dualtimer-test.c

diff --git a/tests/qtest/cmsdk-apb-dualtimer-test.c b/tests/qtest/cmsdk-apb-dualtimer-test.c
new file mode 100644
index 00000000000..ad6a758289c
--- /dev/null
+++ b/tests/qtest/cmsdk-apb-dualtimer-test.c
@@ -0,0 +1,130 @@
+/*
+ * QTest testcase for the CMSDK APB dualtimer device
+ *
+ * Copyright (c) 2021 Linaro Limited
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
+ * for more details.
+ */
+
+#include "qemu/osdep.h"
+#include "libqtest-single.h"
+
+/* IoTKit/ARMSSE dualtimer; driven at 25MHz in mps2-an385, so 40ns per tick */
+#define TIMER_BASE 0x40002000
+
+#define TIMER1LOAD 0
+#define TIMER1VALUE 4
+#define TIMER1CONTROL 8
+#define TIMER1INTCLR 0xc
+#define TIMER1RIS 0x10
+#define TIMER1MIS 0x14
+#define TIMER1BGLOAD 0x18
+
+#define TIMER2LOAD 0x20
+#define TIMER2VALUE 0x24
+#define TIMER2CONTROL 0x28
+#define TIMER2INTCLR 0x2c
+#define TIMER2RIS 0x30
+#define TIMER2MIS 0x34
+#define TIMER2BGLOAD 0x38
+
+#define CTRL_ENABLE (1 << 7)
+#define CTRL_PERIODIC (1 << 6)
+#define CTRL_INTEN (1 << 5)
+#define CTRL_PRESCALE_1 (0 << 2)
+#define CTRL_PRESCALE_16 (1 << 2)
+#define CTRL_PRESCALE_256 (2 << 2)
+#define CTRL_32BIT (1 << 1)
+#define CTRL_ONESHOT (1 << 0)
+
+static void test_dualtimer(void)
+{
+    g_assert_true(readl(TIMER_BASE + TIMER1RIS) == 0);
+
+    /* Start timer: will fire after 40000 ns */
+    writel(TIMER_BASE + TIMER1LOAD, 1000);
+    /* enable in free-running, wrapping, interrupt mode */
+    writel(TIMER_BASE + TIMER1CONTROL, CTRL_ENABLE | CTRL_INTEN);
+
+    /* Step to just past the 500th tick and check VALUE */
+    clock_step(500 * 40 + 1);
+    g_assert_cmpuint(readl(TIMER_BASE + TIMER1RIS), ==, 0);
+    g_assert_cmpuint(readl(TIMER_BASE + TIMER1VALUE), ==, 500);
+
+    /* Just past the 1000th tick: timer should have fired */
+    clock_step(500 * 40);
+    g_assert_cmpuint(readl(TIMER_BASE + TIMER1RIS), ==, 1);
+    g_assert_cmpuint(readl(TIMER_BASE + TIMER1VALUE), ==, 0);
+
+    /*
+     * We are in free-running wrapping 16-bit mode, so on the following
+     * tick VALUE should have wrapped round to 0xffff.
+     */
+    clock_step(40);
+    g_assert_cmpuint(readl(TIMER_BASE + TIMER1VALUE), ==, 0xffff);
+
+    /* Check that any write to INTCLR clears interrupt */
+    writel(TIMER_BASE + TIMER1INTCLR, 1);
+    g_assert_cmpuint(readl(TIMER_BASE + TIMER1RIS), ==, 0);
+
+    /* Turn off the timer */
+    writel(TIMER_BASE + TIMER1CONTROL, 0);
+}
+
+static void test_prescale(void)
+{
+    g_assert_true(readl(TIMER_BASE + TIMER2RIS) == 0);
+
+    /* Start timer: will fire after 40 * 256 * 1000 == 1024000 ns */
+    writel(TIMER_BASE + TIMER2LOAD, 1000);
+    /* enable in periodic, wrapping, interrupt mode, prescale 256 */
+    writel(TIMER_BASE + TIMER2CONTROL,
+           CTRL_ENABLE | CTRL_INTEN | CTRL_PERIODIC | CTRL_PRESCALE_256);
+
+    /* Step to just past the 500th tick and check VALUE */
+    clock_step(40 * 256 * 501);
+    g_assert_cmpuint(readl(TIMER_BASE + TIMER2RIS), ==, 0);
+    g_assert_cmpuint(readl(TIMER_BASE + TIMER2VALUE), ==, 500);
+
+    /* Just past the 1000th tick: timer should have fired */
+    clock_step(40 * 256 * 500);
+    g_assert_cmpuint(readl(TIMER_BASE + TIMER2RIS), ==, 1);
+    g_assert_cmpuint(readl(TIMER_BASE + TIMER2VALUE), ==, 0);
+
+    /* In periodic mode the tick VALUE now reloads */
+    clock_step(40 * 256);
+    g_assert_cmpuint(readl(TIMER_BASE + TIMER2VALUE), ==, 1000);
+
+    /* Check that any write to INTCLR clears interrupt */
+    writel(TIMER_BASE + TIMER2INTCLR, 1);
+    g_assert_cmpuint(readl(TIMER_BASE + TIMER2RIS), ==, 0);
+
+    /* Turn off the timer */
+    writel(TIMER_BASE + TIMER2CONTROL, 0);
+}
+
+int main(int argc, char **argv)
+{
+    int r;
+
+    g_test_init(&argc, &argv, NULL);
+
+    qtest_start("-machine mps2-an385");
+
+    qtest_add_func("/cmsdk-apb-dualtimer/dualtimer", test_dualtimer);
+    qtest_add_func("/cmsdk-apb-dualtimer/prescale", test_prescale);
+
+    r = g_test_run();
+
+    qtest_end();
+
+    return r;
+}
diff --git a/MAINTAINERS b/MAINTAINERS
index 3729b89f359..154a91d12e5 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -584,6 +584,7 @@ F: include/hw/timer/cmsdk-apb-timer.h
 F: tests/qtest/cmsdk-apb-timer-test.c
 F: hw/timer/cmsdk-apb-dualtimer.c
 F: include/hw/timer/cmsdk-apb-dualtimer.h
+F: tests/qtest/cmsdk-apb-dualtimer-test.c
 F: hw/char/cmsdk-apb-uart.c
 F: include/hw/char/cmsdk-apb-uart.h
 F: hw/watchdog/cmsdk-apb-watchdog.c
diff --git a/tests/qtest/meson.build b/tests/qtest/meson.build
index 9e2ebc47041..69dd4a8547c 100644
--- a/tests/qtest/meson.build
+++ b/tests/qtest/meson.build
@@ -141,6 +141,7 @@ qtests_npcm7xx = \
    'npcm7xx_timer-test',
    'npcm7xx_watchdog_timer-test']
 qtests_arm = \
+  (config_all_devices.has_key('CONFIG_CMSDK_APB_DUALTIMER') ? ['cmsdk-apb-dualtimer-test'] : []) + \
   (config_all_devices.has_key('CONFIG_CMSDK_APB_TIMER') ? ['cmsdk-apb-timer-test'] : []) + \
   (config_all_devices.has_key('CONFIG_CMSDK_APB_WATCHDOG') ? ['cmsdk-apb-watchdog-test'] : []) + \
   (config_all_devices.has_key('CONFIG_PFLASH_CFI02') ? ['pflash-cfi02-test'] : []) +         \
-- 
2.20.1

Re: [PATCH v2 05/25] tests: Add a simple test of the CMSDK APB dual timer

[Philippe Mathieu-Daudé]

On 1/28/21 12:41 PM, Peter Maydell wrote:
> Add a simple test of the CMSDK dual timer, since we're about to do
> some refactoring of how it is clocked.
> 
> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
> Message-id: 20210121190622.22000-6-peter.maydell@linaro.org
> ---
> v1->v2 changes:
>  - phrase various clock_step() arguments as calculations
>    based on tick counts and the ns-per-tick value rather
>    than just the final numbers
>  - remove set-but-not-used QTestState *s variable
>    that gcc warns about but clang does not
>  - use 40 * 256 in test_prescale() as suggested by Luc
> ---
>  tests/qtest/cmsdk-apb-dualtimer-test.c | 130 +++++++++++++++++++++++++
>  MAINTAINERS                            |   1 +
>  tests/qtest/meson.build                |   1 +
>  3 files changed, 132 insertions(+)
>  create mode 100644 tests/qtest/cmsdk-apb-dualtimer-test.c

Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>

Re: [PATCH v2 05/25] tests: Add a simple test of the CMSDK APB dual timer

[Luc Michel]

On 11:41 Thu 28 Jan     , Peter Maydell wrote:
> Add a simple test of the CMSDK dual timer, since we're about to do
> some refactoring of how it is clocked.
> 
> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
> Message-id: 20210121190622.22000-6-peter.maydell@linaro.org

Reviewed-by: Luc Michel <luc@lmichel.fr>

> ---
> v1->v2 changes:
>  - phrase various clock_step() arguments as calculations
>    based on tick counts and the ns-per-tick value rather
>    than just the final numbers
>  - remove set-but-not-used QTestState *s variable
>    that gcc warns about but clang does not
>  - use 40 * 256 in test_prescale() as suggested by Luc
> ---
>  tests/qtest/cmsdk-apb-dualtimer-test.c | 130 +++++++++++++++++++++++++
>  MAINTAINERS                            |   1 +
>  tests/qtest/meson.build                |   1 +
>  3 files changed, 132 insertions(+)
>  create mode 100644 tests/qtest/cmsdk-apb-dualtimer-test.c
> 
> diff --git a/tests/qtest/cmsdk-apb-dualtimer-test.c b/tests/qtest/cmsdk-apb-dualtimer-test.c
> new file mode 100644
> index 00000000000..ad6a758289c
> --- /dev/null
> +++ b/tests/qtest/cmsdk-apb-dualtimer-test.c
> @@ -0,0 +1,130 @@
> +/*
> + * QTest testcase for the CMSDK APB dualtimer device
> + *
> + * Copyright (c) 2021 Linaro Limited
> + *
> + * This program is free software; you can redistribute it and/or modify it
> + * under the terms of the GNU General Public License as published by the
> + * Free Software Foundation; either version 2 of the License, or
> + * (at your option) any later version.
> + *
> + * This program is distributed in the hope that it will be useful, but WITHOUT
> + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
> + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
> + * for more details.
> + */
> +
> +#include "qemu/osdep.h"
> +#include "libqtest-single.h"
> +
> +/* IoTKit/ARMSSE dualtimer; driven at 25MHz in mps2-an385, so 40ns per tick */
> +#define TIMER_BASE 0x40002000
> +
> +#define TIMER1LOAD 0
> +#define TIMER1VALUE 4
> +#define TIMER1CONTROL 8
> +#define TIMER1INTCLR 0xc
> +#define TIMER1RIS 0x10
> +#define TIMER1MIS 0x14
> +#define TIMER1BGLOAD 0x18
> +
> +#define TIMER2LOAD 0x20
> +#define TIMER2VALUE 0x24
> +#define TIMER2CONTROL 0x28
> +#define TIMER2INTCLR 0x2c
> +#define TIMER2RIS 0x30
> +#define TIMER2MIS 0x34
> +#define TIMER2BGLOAD 0x38
> +
> +#define CTRL_ENABLE (1 << 7)
> +#define CTRL_PERIODIC (1 << 6)
> +#define CTRL_INTEN (1 << 5)
> +#define CTRL_PRESCALE_1 (0 << 2)
> +#define CTRL_PRESCALE_16 (1 << 2)
> +#define CTRL_PRESCALE_256 (2 << 2)
> +#define CTRL_32BIT (1 << 1)
> +#define CTRL_ONESHOT (1 << 0)
> +
> +static void test_dualtimer(void)
> +{
> +    g_assert_true(readl(TIMER_BASE + TIMER1RIS) == 0);
> +
> +    /* Start timer: will fire after 40000 ns */
> +    writel(TIMER_BASE + TIMER1LOAD, 1000);
> +    /* enable in free-running, wrapping, interrupt mode */
> +    writel(TIMER_BASE + TIMER1CONTROL, CTRL_ENABLE | CTRL_INTEN);
> +
> +    /* Step to just past the 500th tick and check VALUE */
> +    clock_step(500 * 40 + 1);
> +    g_assert_cmpuint(readl(TIMER_BASE + TIMER1RIS), ==, 0);
> +    g_assert_cmpuint(readl(TIMER_BASE + TIMER1VALUE), ==, 500);
> +
> +    /* Just past the 1000th tick: timer should have fired */
> +    clock_step(500 * 40);
> +    g_assert_cmpuint(readl(TIMER_BASE + TIMER1RIS), ==, 1);
> +    g_assert_cmpuint(readl(TIMER_BASE + TIMER1VALUE), ==, 0);
> +
> +    /*
> +     * We are in free-running wrapping 16-bit mode, so on the following
> +     * tick VALUE should have wrapped round to 0xffff.
> +     */
> +    clock_step(40);
> +    g_assert_cmpuint(readl(TIMER_BASE + TIMER1VALUE), ==, 0xffff);
> +
> +    /* Check that any write to INTCLR clears interrupt */
> +    writel(TIMER_BASE + TIMER1INTCLR, 1);
> +    g_assert_cmpuint(readl(TIMER_BASE + TIMER1RIS), ==, 0);
> +
> +    /* Turn off the timer */
> +    writel(TIMER_BASE + TIMER1CONTROL, 0);
> +}
> +
> +static void test_prescale(void)
> +{
> +    g_assert_true(readl(TIMER_BASE + TIMER2RIS) == 0);
> +
> +    /* Start timer: will fire after 40 * 256 * 1000 == 1024000 ns */
> +    writel(TIMER_BASE + TIMER2LOAD, 1000);
> +    /* enable in periodic, wrapping, interrupt mode, prescale 256 */
> +    writel(TIMER_BASE + TIMER2CONTROL,
> +           CTRL_ENABLE | CTRL_INTEN | CTRL_PERIODIC | CTRL_PRESCALE_256);
> +
> +    /* Step to just past the 500th tick and check VALUE */
> +    clock_step(40 * 256 * 501);
> +    g_assert_cmpuint(readl(TIMER_BASE + TIMER2RIS), ==, 0);
> +    g_assert_cmpuint(readl(TIMER_BASE + TIMER2VALUE), ==, 500);
> +
> +    /* Just past the 1000th tick: timer should have fired */
> +    clock_step(40 * 256 * 500);
> +    g_assert_cmpuint(readl(TIMER_BASE + TIMER2RIS), ==, 1);
> +    g_assert_cmpuint(readl(TIMER_BASE + TIMER2VALUE), ==, 0);
> +
> +    /* In periodic mode the tick VALUE now reloads */
> +    clock_step(40 * 256);
> +    g_assert_cmpuint(readl(TIMER_BASE + TIMER2VALUE), ==, 1000);
> +
> +    /* Check that any write to INTCLR clears interrupt */
> +    writel(TIMER_BASE + TIMER2INTCLR, 1);
> +    g_assert_cmpuint(readl(TIMER_BASE + TIMER2RIS), ==, 0);
> +
> +    /* Turn off the timer */
> +    writel(TIMER_BASE + TIMER2CONTROL, 0);
> +}
> +
> +int main(int argc, char **argv)
> +{
> +    int r;
> +
> +    g_test_init(&argc, &argv, NULL);
> +
> +    qtest_start("-machine mps2-an385");
> +
> +    qtest_add_func("/cmsdk-apb-dualtimer/dualtimer", test_dualtimer);
> +    qtest_add_func("/cmsdk-apb-dualtimer/prescale", test_prescale);
> +
> +    r = g_test_run();
> +
> +    qtest_end();
> +
> +    return r;
> +}
> diff --git a/MAINTAINERS b/MAINTAINERS
> index 3729b89f359..154a91d12e5 100644
> --- a/MAINTAINERS
> +++ b/MAINTAINERS
> @@ -584,6 +584,7 @@ F: include/hw/timer/cmsdk-apb-timer.h
>  F: tests/qtest/cmsdk-apb-timer-test.c
>  F: hw/timer/cmsdk-apb-dualtimer.c
>  F: include/hw/timer/cmsdk-apb-dualtimer.h
> +F: tests/qtest/cmsdk-apb-dualtimer-test.c
>  F: hw/char/cmsdk-apb-uart.c
>  F: include/hw/char/cmsdk-apb-uart.h
>  F: hw/watchdog/cmsdk-apb-watchdog.c
> diff --git a/tests/qtest/meson.build b/tests/qtest/meson.build
> index 9e2ebc47041..69dd4a8547c 100644
> --- a/tests/qtest/meson.build
> +++ b/tests/qtest/meson.build
> @@ -141,6 +141,7 @@ qtests_npcm7xx = \
>     'npcm7xx_timer-test',
>     'npcm7xx_watchdog_timer-test']
>  qtests_arm = \
> +  (config_all_devices.has_key('CONFIG_CMSDK_APB_DUALTIMER') ? ['cmsdk-apb-dualtimer-test'] : []) + \
>    (config_all_devices.has_key('CONFIG_CMSDK_APB_TIMER') ? ['cmsdk-apb-timer-test'] : []) + \
>    (config_all_devices.has_key('CONFIG_CMSDK_APB_WATCHDOG') ? ['cmsdk-apb-watchdog-test'] : []) + \
>    (config_all_devices.has_key('CONFIG_PFLASH_CFI02') ? ['pflash-cfi02-test'] : []) +         \
> -- 
> 2.20.1
> 

-- 

[PATCH v2 06/25] hw/timer/cmsdk-apb-timer: Rename CMSDKAPBTIMER struct to CMSDKAPBTimer

[Peter Maydell]

The state struct for the CMSDK APB timer device doesn't follow our
usual naming convention of camelcase -- "CMSDK" and "APB" are both
acronyms, but "TIMER" is not so should not be all-uppercase.
Globally rename the struct to "CMSDKAPBTimer" (bringing it into line
with CMSDKAPBWatchdog and CMSDKAPBDualTimer; CMSDKAPBUART remains
as-is because "UART" is an acronym).

Commit created with:
 perl -p -i -e 's/CMSDKAPBTIMER/CMSDKAPBTimer/g' hw/timer/cmsdk-apb-timer.c include/hw/arm/armsse.h include/hw/timer/cmsdk-apb-timer.h

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Luc Michel <luc@lmichel.fr>
Message-id: 20210121190622.22000-7-peter.maydell@linaro.org
---
 include/hw/arm/armsse.h            |  6 +++---
 include/hw/timer/cmsdk-apb-timer.h |  4 ++--
 hw/timer/cmsdk-apb-timer.c         | 28 ++++++++++++++--------------
 3 files changed, 19 insertions(+), 19 deletions(-)

diff --git a/include/hw/arm/armsse.h b/include/hw/arm/armsse.h
index 77f86771c30..83f5e28c16e 100644
--- a/include/hw/arm/armsse.h
+++ b/include/hw/arm/armsse.h
@@ -153,9 +153,9 @@ struct ARMSSE {
     TZPPC apb_ppc0;
     TZPPC apb_ppc1;
     TZMPC mpc[IOTS_NUM_MPC];
-    CMSDKAPBTIMER timer0;
-    CMSDKAPBTIMER timer1;
-    CMSDKAPBTIMER s32ktimer;
+    CMSDKAPBTimer timer0;
+    CMSDKAPBTimer timer1;
+    CMSDKAPBTimer s32ktimer;
     qemu_or_irq ppc_irq_orgate;
     SplitIRQ sec_resp_splitter;
     SplitIRQ ppc_irq_splitter[NUM_PPCS];
diff --git a/include/hw/timer/cmsdk-apb-timer.h b/include/hw/timer/cmsdk-apb-timer.h
index 0d80b2a48cd..baa009bb2da 100644
--- a/include/hw/timer/cmsdk-apb-timer.h
+++ b/include/hw/timer/cmsdk-apb-timer.h
@@ -18,9 +18,9 @@
 #include "qom/object.h"
 
 #define TYPE_CMSDK_APB_TIMER "cmsdk-apb-timer"
-OBJECT_DECLARE_SIMPLE_TYPE(CMSDKAPBTIMER, CMSDK_APB_TIMER)
+OBJECT_DECLARE_SIMPLE_TYPE(CMSDKAPBTimer, CMSDK_APB_TIMER)
 
-struct CMSDKAPBTIMER {
+struct CMSDKAPBTimer {
     /*< private >*/
     SysBusDevice parent_obj;
 
diff --git a/hw/timer/cmsdk-apb-timer.c b/hw/timer/cmsdk-apb-timer.c
index f85f1309f37..ae9c5422540 100644
--- a/hw/timer/cmsdk-apb-timer.c
+++ b/hw/timer/cmsdk-apb-timer.c
@@ -67,14 +67,14 @@ static const int timer_id[] = {
     0x0d, 0xf0, 0x05, 0xb1, /* CID0..CID3 */
 };
 
-static void cmsdk_apb_timer_update(CMSDKAPBTIMER *s)
+static void cmsdk_apb_timer_update(CMSDKAPBTimer *s)
 {
     qemu_set_irq(s->timerint, !!(s->intstatus & R_INTSTATUS_IRQ_MASK));
 }
 
 static uint64_t cmsdk_apb_timer_read(void *opaque, hwaddr offset, unsigned size)
 {
-    CMSDKAPBTIMER *s = CMSDK_APB_TIMER(opaque);
+    CMSDKAPBTimer *s = CMSDK_APB_TIMER(opaque);
     uint64_t r;
 
     switch (offset) {
@@ -106,7 +106,7 @@ static uint64_t cmsdk_apb_timer_read(void *opaque, hwaddr offset, unsigned size)
 static void cmsdk_apb_timer_write(void *opaque, hwaddr offset, uint64_t value,
                                   unsigned size)
 {
-    CMSDKAPBTIMER *s = CMSDK_APB_TIMER(opaque);
+    CMSDKAPBTimer *s = CMSDK_APB_TIMER(opaque);
 
     trace_cmsdk_apb_timer_write(offset, value, size);
 
@@ -181,7 +181,7 @@ static const MemoryRegionOps cmsdk_apb_timer_ops = {
 
 static void cmsdk_apb_timer_tick(void *opaque)
 {
-    CMSDKAPBTIMER *s = CMSDK_APB_TIMER(opaque);
+    CMSDKAPBTimer *s = CMSDK_APB_TIMER(opaque);
 
     if (s->ctrl & R_CTRL_IRQEN_MASK) {
         s->intstatus |= R_INTSTATUS_IRQ_MASK;
@@ -191,7 +191,7 @@ static void cmsdk_apb_timer_tick(void *opaque)
 
 static void cmsdk_apb_timer_reset(DeviceState *dev)
 {
-    CMSDKAPBTIMER *s = CMSDK_APB_TIMER(dev);
+    CMSDKAPBTimer *s = CMSDK_APB_TIMER(dev);
 
     trace_cmsdk_apb_timer_reset();
     s->ctrl = 0;
@@ -206,7 +206,7 @@ static void cmsdk_apb_timer_reset(DeviceState *dev)
 static void cmsdk_apb_timer_init(Object *obj)
 {
     SysBusDevice *sbd = SYS_BUS_DEVICE(obj);
-    CMSDKAPBTIMER *s = CMSDK_APB_TIMER(obj);
+    CMSDKAPBTimer *s = CMSDK_APB_TIMER(obj);
 
     memory_region_init_io(&s->iomem, obj, &cmsdk_apb_timer_ops,
                           s, "cmsdk-apb-timer", 0x1000);
@@ -216,7 +216,7 @@ static void cmsdk_apb_timer_init(Object *obj)
 
 static void cmsdk_apb_timer_realize(DeviceState *dev, Error **errp)
 {
-    CMSDKAPBTIMER *s = CMSDK_APB_TIMER(dev);
+    CMSDKAPBTimer *s = CMSDK_APB_TIMER(dev);
 
     if (s->pclk_frq == 0) {
         error_setg(errp, "CMSDK APB timer: pclk-frq property must be set");
@@ -239,17 +239,17 @@ static const VMStateDescription cmsdk_apb_timer_vmstate = {
     .version_id = 1,
     .minimum_version_id = 1,
     .fields = (VMStateField[]) {
-        VMSTATE_PTIMER(timer, CMSDKAPBTIMER),
-        VMSTATE_UINT32(ctrl, CMSDKAPBTIMER),
-        VMSTATE_UINT32(value, CMSDKAPBTIMER),
-        VMSTATE_UINT32(reload, CMSDKAPBTIMER),
-        VMSTATE_UINT32(intstatus, CMSDKAPBTIMER),
+        VMSTATE_PTIMER(timer, CMSDKAPBTimer),
+        VMSTATE_UINT32(ctrl, CMSDKAPBTimer),
+        VMSTATE_UINT32(value, CMSDKAPBTimer),
+        VMSTATE_UINT32(reload, CMSDKAPBTimer),
+        VMSTATE_UINT32(intstatus, CMSDKAPBTimer),
         VMSTATE_END_OF_LIST()
     }
 };
 
 static Property cmsdk_apb_timer_properties[] = {
-    DEFINE_PROP_UINT32("pclk-frq", CMSDKAPBTIMER, pclk_frq, 0),
+    DEFINE_PROP_UINT32("pclk-frq", CMSDKAPBTimer, pclk_frq, 0),
     DEFINE_PROP_END_OF_LIST(),
 };
 
@@ -266,7 +266,7 @@ static void cmsdk_apb_timer_class_init(ObjectClass *klass, void *data)
 static const TypeInfo cmsdk_apb_timer_info = {
     .name = TYPE_CMSDK_APB_TIMER,
     .parent = TYPE_SYS_BUS_DEVICE,
-    .instance_size = sizeof(CMSDKAPBTIMER),
+    .instance_size = sizeof(CMSDKAPBTimer),
     .instance_init = cmsdk_apb_timer_init,
     .class_init = cmsdk_apb_timer_class_init,
 };
-- 
2.20.1

[PATCH v2 07/25] hw/timer/cmsdk-apb-timer: Add Clock input

[Peter Maydell]

As the first step in converting the CMSDK_APB_TIMER device to the
Clock framework, add a Clock input.  For the moment we do nothing
with this clock; we will change the behaviour from using the pclk-frq
property to using the Clock once all the users of this device have
been converted to wire up the Clock.

Since the device doesn't already have a doc comment for its "QEMU
interface", we add one including the new Clock.

This is a migration compatibility break for machines mps2-an505,
mps2-an521, musca-a, musca-b1.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Luc Michel <luc@lmichel.fr>
Message-id: 20210121190622.22000-8-peter.maydell@linaro.org
---
 include/hw/timer/cmsdk-apb-timer.h | 9 +++++++++
 hw/timer/cmsdk-apb-timer.c         | 7 +++++--
 2 files changed, 14 insertions(+), 2 deletions(-)

diff --git a/include/hw/timer/cmsdk-apb-timer.h b/include/hw/timer/cmsdk-apb-timer.h
index baa009bb2da..fc2aa97acac 100644
--- a/include/hw/timer/cmsdk-apb-timer.h
+++ b/include/hw/timer/cmsdk-apb-timer.h
@@ -15,11 +15,19 @@
 #include "hw/qdev-properties.h"
 #include "hw/sysbus.h"
 #include "hw/ptimer.h"
+#include "hw/clock.h"
 #include "qom/object.h"
 
 #define TYPE_CMSDK_APB_TIMER "cmsdk-apb-timer"
 OBJECT_DECLARE_SIMPLE_TYPE(CMSDKAPBTimer, CMSDK_APB_TIMER)
 
+/*
+ * QEMU interface:
+ *  + QOM property "pclk-frq": frequency at which the timer is clocked
+ *  + Clock input "pclk": clock for the timer
+ *  + sysbus MMIO region 0: the register bank
+ *  + sysbus IRQ 0: timer interrupt TIMERINT
+ */
 struct CMSDKAPBTimer {
     /*< private >*/
     SysBusDevice parent_obj;
@@ -29,6 +37,7 @@ struct CMSDKAPBTimer {
     qemu_irq timerint;
     uint32_t pclk_frq;
     struct ptimer_state *timer;
+    Clock *pclk;
 
     uint32_t ctrl;
     uint32_t value;
diff --git a/hw/timer/cmsdk-apb-timer.c b/hw/timer/cmsdk-apb-timer.c
index ae9c5422540..c63145ff553 100644
--- a/hw/timer/cmsdk-apb-timer.c
+++ b/hw/timer/cmsdk-apb-timer.c
@@ -35,6 +35,7 @@
 #include "hw/sysbus.h"
 #include "hw/irq.h"
 #include "hw/registerfields.h"
+#include "hw/qdev-clock.h"
 #include "hw/timer/cmsdk-apb-timer.h"
 #include "migration/vmstate.h"
 
@@ -212,6 +213,7 @@ static void cmsdk_apb_timer_init(Object *obj)
                           s, "cmsdk-apb-timer", 0x1000);
     sysbus_init_mmio(sbd, &s->iomem);
     sysbus_init_irq(sbd, &s->timerint);
+    s->pclk = qdev_init_clock_in(DEVICE(s), "pclk", NULL, NULL);
 }
 
 static void cmsdk_apb_timer_realize(DeviceState *dev, Error **errp)
@@ -236,10 +238,11 @@ static void cmsdk_apb_timer_realize(DeviceState *dev, Error **errp)
 
 static const VMStateDescription cmsdk_apb_timer_vmstate = {
     .name = "cmsdk-apb-timer",
-    .version_id = 1,
-    .minimum_version_id = 1,
+    .version_id = 2,
+    .minimum_version_id = 2,
     .fields = (VMStateField[]) {
         VMSTATE_PTIMER(timer, CMSDKAPBTimer),
+        VMSTATE_CLOCK(pclk, CMSDKAPBTimer),
         VMSTATE_UINT32(ctrl, CMSDKAPBTimer),
         VMSTATE_UINT32(value, CMSDKAPBTimer),
         VMSTATE_UINT32(reload, CMSDKAPBTimer),
-- 
2.20.1

[PATCH v2 08/25] hw/timer/cmsdk-apb-dualtimer: Add Clock input

[Peter Maydell]

As the first step in converting the CMSDK_APB_DUALTIMER device to the
Clock framework, add a Clock input.  For the moment we do nothing
with this clock; we will change the behaviour from using the pclk-frq
property to using the Clock once all the users of this device have
been converted to wire up the Clock.

We take the opportunity to correct the name of the clock input to
match the hardware -- the dual timer names the clock which drives the
timers TIMCLK.  (It does also have a 'pclk' input, which is used only
for the register and APB bus logic; on the SSE-200 these clocks are
both connected together.)

This is a migration compatibility break for machines mps2-an385,
mps2-an386, mps2-an500, mps2-an511, mps2-an505, mps2-an521, musca-a,
musca-b1.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Luc Michel <luc@lmichel.fr>
Message-id: 20210121190622.22000-9-peter.maydell@linaro.org
---
 include/hw/timer/cmsdk-apb-dualtimer.h | 3 +++
 hw/timer/cmsdk-apb-dualtimer.c         | 7 +++++--
 2 files changed, 8 insertions(+), 2 deletions(-)

diff --git a/include/hw/timer/cmsdk-apb-dualtimer.h b/include/hw/timer/cmsdk-apb-dualtimer.h
index 08d9e6fa3d5..3adbb01dd34 100644
--- a/include/hw/timer/cmsdk-apb-dualtimer.h
+++ b/include/hw/timer/cmsdk-apb-dualtimer.h
@@ -17,6 +17,7 @@
  *
  * QEMU interface:
  *  + QOM property "pclk-frq": frequency at which the timer is clocked
+ *  + Clock input "TIMCLK": clock (for both timers)
  *  + sysbus MMIO region 0: the register bank
  *  + sysbus IRQ 0: combined timer interrupt TIMINTC
  *  + sysbus IRO 1: timer block 1 interrupt TIMINT1
@@ -28,6 +29,7 @@
 
 #include "hw/sysbus.h"
 #include "hw/ptimer.h"
+#include "hw/clock.h"
 #include "qom/object.h"
 
 #define TYPE_CMSDK_APB_DUALTIMER "cmsdk-apb-dualtimer"
@@ -62,6 +64,7 @@ struct CMSDKAPBDualTimer {
     MemoryRegion iomem;
     qemu_irq timerintc;
     uint32_t pclk_frq;
+    Clock *timclk;
 
     CMSDKAPBDualTimerModule timermod[CMSDK_APB_DUALTIMER_NUM_MODULES];
     uint32_t timeritcr;
diff --git a/hw/timer/cmsdk-apb-dualtimer.c b/hw/timer/cmsdk-apb-dualtimer.c
index f6534241b94..781b496037b 100644
--- a/hw/timer/cmsdk-apb-dualtimer.c
+++ b/hw/timer/cmsdk-apb-dualtimer.c
@@ -25,6 +25,7 @@
 #include "hw/irq.h"
 #include "hw/qdev-properties.h"
 #include "hw/registerfields.h"
+#include "hw/qdev-clock.h"
 #include "hw/timer/cmsdk-apb-dualtimer.h"
 #include "migration/vmstate.h"
 
@@ -445,6 +446,7 @@ static void cmsdk_apb_dualtimer_init(Object *obj)
     for (i = 0; i < ARRAY_SIZE(s->timermod); i++) {
         sysbus_init_irq(sbd, &s->timermod[i].timerint);
     }
+    s->timclk = qdev_init_clock_in(DEVICE(s), "TIMCLK", NULL, NULL);
 }
 
 static void cmsdk_apb_dualtimer_realize(DeviceState *dev, Error **errp)
@@ -485,9 +487,10 @@ static const VMStateDescription cmsdk_dualtimermod_vmstate = {
 
 static const VMStateDescription cmsdk_apb_dualtimer_vmstate = {
     .name = "cmsdk-apb-dualtimer",
-    .version_id = 1,
-    .minimum_version_id = 1,
+    .version_id = 2,
+    .minimum_version_id = 2,
     .fields = (VMStateField[]) {
+        VMSTATE_CLOCK(timclk, CMSDKAPBDualTimer),
         VMSTATE_STRUCT_ARRAY(timermod, CMSDKAPBDualTimer,
                              CMSDK_APB_DUALTIMER_NUM_MODULES,
                              1, cmsdk_dualtimermod_vmstate,
-- 
2.20.1

[PATCH v2 09/25] hw/watchdog/cmsdk-apb-watchdog: Add Clock input

[Peter Maydell]

As the first step in converting the CMSDK_APB_TIMER device to the
Clock framework, add a Clock input.  For the moment we do nothing
with this clock; we will change the behaviour from using the
wdogclk-frq property to using the Clock once all the users of this
device have been converted to wire up the Clock.

This is a migration compatibility break for machines mps2-an385,
mps2-an386, mps2-an500, mps2-an511, mps2-an505, mps2-an521, musca-a,
musca-b1, lm3s811evb, lm3s6965evb.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Luc Michel <luc@lmichel.fr>
Message-id: 20210121190622.22000-10-peter.maydell@linaro.org
---
 include/hw/watchdog/cmsdk-apb-watchdog.h | 3 +++
 hw/watchdog/cmsdk-apb-watchdog.c         | 7 +++++--
 2 files changed, 8 insertions(+), 2 deletions(-)

diff --git a/include/hw/watchdog/cmsdk-apb-watchdog.h b/include/hw/watchdog/cmsdk-apb-watchdog.h
index 3da0d43e355..34069ca6969 100644
--- a/include/hw/watchdog/cmsdk-apb-watchdog.h
+++ b/include/hw/watchdog/cmsdk-apb-watchdog.h
@@ -17,6 +17,7 @@
  *
  * QEMU interface:
  *  + QOM property "wdogclk-frq": frequency at which the watchdog is clocked
+ *  + Clock input "WDOGCLK": clock for the watchdog's timer
  *  + sysbus MMIO region 0: the register bank
  *  + sysbus IRQ 0: watchdog interrupt
  *
@@ -33,6 +34,7 @@
 
 #include "hw/sysbus.h"
 #include "hw/ptimer.h"
+#include "hw/clock.h"
 #include "qom/object.h"
 
 #define TYPE_CMSDK_APB_WATCHDOG "cmsdk-apb-watchdog"
@@ -54,6 +56,7 @@ struct CMSDKAPBWatchdog {
     uint32_t wdogclk_frq;
     bool is_luminary;
     struct ptimer_state *timer;
+    Clock *wdogclk;
 
     uint32_t control;
     uint32_t intstatus;
diff --git a/hw/watchdog/cmsdk-apb-watchdog.c b/hw/watchdog/cmsdk-apb-watchdog.c
index 5bbadadfa68..b03bcb73628 100644
--- a/hw/watchdog/cmsdk-apb-watchdog.c
+++ b/hw/watchdog/cmsdk-apb-watchdog.c
@@ -30,6 +30,7 @@
 #include "hw/irq.h"
 #include "hw/qdev-properties.h"
 #include "hw/registerfields.h"
+#include "hw/qdev-clock.h"
 #include "hw/watchdog/cmsdk-apb-watchdog.h"
 #include "migration/vmstate.h"
 
@@ -318,6 +319,7 @@ static void cmsdk_apb_watchdog_init(Object *obj)
                           s, "cmsdk-apb-watchdog", 0x1000);
     sysbus_init_mmio(sbd, &s->iomem);
     sysbus_init_irq(sbd, &s->wdogint);
+    s->wdogclk = qdev_init_clock_in(DEVICE(s), "WDOGCLK", NULL, NULL);
 
     s->is_luminary = false;
     s->id = cmsdk_apb_watchdog_id;
@@ -346,9 +348,10 @@ static void cmsdk_apb_watchdog_realize(DeviceState *dev, Error **errp)
 
 static const VMStateDescription cmsdk_apb_watchdog_vmstate = {
     .name = "cmsdk-apb-watchdog",
-    .version_id = 1,
-    .minimum_version_id = 1,
+    .version_id = 2,
+    .minimum_version_id = 2,
     .fields = (VMStateField[]) {
+        VMSTATE_CLOCK(wdogclk, CMSDKAPBWatchdog),
         VMSTATE_PTIMER(timer, CMSDKAPBWatchdog),
         VMSTATE_UINT32(control, CMSDKAPBWatchdog),
         VMSTATE_UINT32(intstatus, CMSDKAPBWatchdog),
-- 
2.20.1

[PATCH v2 10/25] hw/arm/armsse: Rename "MAINCLK" property to "MAINCLK_FRQ"

[Peter Maydell]

While we transition the ARMSSE code from integer properties
specifying clock frequencies to Clock objects, we want to have the
device provide both at once.  We want the final name of the main
input Clock to be "MAINCLK", following the hardware name.
Unfortunately creating an input Clock with a name X creates an
under-the-hood QOM property X; for "MAINCLK" this clashes with the
existing UINT32 property of that name.

Rename the UINT32 property to MAINCLK_FRQ so it can coexist with the
MAINCLK Clock; once the transition is complete MAINCLK_FRQ will be
deleted.

Commit created with:
 perl -p -i -e 's/MAINCLK/MAINCLK_FRQ/g' hw/arm/{armsse,mps2-tz,musca}.c include/hw/arm/armsse.h

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Luc Michel <luc@lmichel.fr>
Message-id: 20210121190622.22000-11-peter.maydell@linaro.org
---
 include/hw/arm/armsse.h | 2 +-
 hw/arm/armsse.c         | 6 +++---
 hw/arm/mps2-tz.c        | 2 +-
 hw/arm/musca.c          | 2 +-
 4 files changed, 6 insertions(+), 6 deletions(-)

diff --git a/include/hw/arm/armsse.h b/include/hw/arm/armsse.h
index 83f5e28c16e..4860a793f4b 100644
--- a/include/hw/arm/armsse.h
+++ b/include/hw/arm/armsse.h
@@ -39,7 +39,7 @@
  * QEMU interface:
  *  + QOM property "memory" is a MemoryRegion containing the devices provided
  *    by the board model.
- *  + QOM property "MAINCLK" is the frequency of the main system clock
+ *  + QOM property "MAINCLK_FRQ" is the frequency of the main system clock
  *  + QOM property "EXP_NUMIRQ" sets the number of expansion interrupts.
  *    (In hardware, the SSE-200 permits the number of expansion interrupts
  *    for the two CPUs to be configured separately, but we restrict it to
diff --git a/hw/arm/armsse.c b/hw/arm/armsse.c
index baac027659d..d2ba0459c44 100644
--- a/hw/arm/armsse.c
+++ b/hw/arm/armsse.c
@@ -47,7 +47,7 @@ static Property iotkit_properties[] = {
     DEFINE_PROP_LINK("memory", ARMSSE, board_memory, TYPE_MEMORY_REGION,
                      MemoryRegion *),
     DEFINE_PROP_UINT32("EXP_NUMIRQ", ARMSSE, exp_numirq, 64),
-    DEFINE_PROP_UINT32("MAINCLK", ARMSSE, mainclk_frq, 0),
+    DEFINE_PROP_UINT32("MAINCLK_FRQ", ARMSSE, mainclk_frq, 0),
     DEFINE_PROP_UINT32("SRAM_ADDR_WIDTH", ARMSSE, sram_addr_width, 15),
     DEFINE_PROP_UINT32("init-svtor", ARMSSE, init_svtor, 0x10000000),
     DEFINE_PROP_BOOL("CPU0_FPU", ARMSSE, cpu_fpu[0], true),
@@ -59,7 +59,7 @@ static Property armsse_properties[] = {
     DEFINE_PROP_LINK("memory", ARMSSE, board_memory, TYPE_MEMORY_REGION,
                      MemoryRegion *),
     DEFINE_PROP_UINT32("EXP_NUMIRQ", ARMSSE, exp_numirq, 64),
-    DEFINE_PROP_UINT32("MAINCLK", ARMSSE, mainclk_frq, 0),
+    DEFINE_PROP_UINT32("MAINCLK_FRQ", ARMSSE, mainclk_frq, 0),
     DEFINE_PROP_UINT32("SRAM_ADDR_WIDTH", ARMSSE, sram_addr_width, 15),
     DEFINE_PROP_UINT32("init-svtor", ARMSSE, init_svtor, 0x10000000),
     DEFINE_PROP_BOOL("CPU0_FPU", ARMSSE, cpu_fpu[0], false),
@@ -448,7 +448,7 @@ static void armsse_realize(DeviceState *dev, Error **errp)
     }
 
     if (!s->mainclk_frq) {
-        error_setg(errp, "MAINCLK property was not set");
+        error_setg(errp, "MAINCLK_FRQ property was not set");
         return;
     }
 
diff --git a/hw/arm/mps2-tz.c b/hw/arm/mps2-tz.c
index 3707876d6d4..6a9eed9022a 100644
--- a/hw/arm/mps2-tz.c
+++ b/hw/arm/mps2-tz.c
@@ -402,7 +402,7 @@ static void mps2tz_common_init(MachineState *machine)
     object_property_set_link(OBJECT(&mms->iotkit), "memory",
                              OBJECT(system_memory), &error_abort);
     qdev_prop_set_uint32(iotkitdev, "EXP_NUMIRQ", MPS2TZ_NUMIRQ);
-    qdev_prop_set_uint32(iotkitdev, "MAINCLK", SYSCLK_FRQ);
+    qdev_prop_set_uint32(iotkitdev, "MAINCLK_FRQ", SYSCLK_FRQ);
     sysbus_realize(SYS_BUS_DEVICE(&mms->iotkit), &error_fatal);
 
     /*
diff --git a/hw/arm/musca.c b/hw/arm/musca.c
index b50157f63a6..d82bef11cf2 100644
--- a/hw/arm/musca.c
+++ b/hw/arm/musca.c
@@ -375,7 +375,7 @@ static void musca_init(MachineState *machine)
     qdev_prop_set_uint32(ssedev, "EXP_NUMIRQ", mmc->num_irqs);
     qdev_prop_set_uint32(ssedev, "init-svtor", mmc->init_svtor);
     qdev_prop_set_uint32(ssedev, "SRAM_ADDR_WIDTH", mmc->sram_addr_width);
-    qdev_prop_set_uint32(ssedev, "MAINCLK", SYSCLK_FRQ);
+    qdev_prop_set_uint32(ssedev, "MAINCLK_FRQ", SYSCLK_FRQ);
     /*
      * Musca-A takes the default SSE-200 FPU/DSP settings (ie no for
      * CPU0 and yes for CPU1); Musca-B1 explicitly enables them for CPU0.
-- 
2.20.1

[PATCH v2 11/25] hw/arm/armsse: Wire up clocks

[Peter Maydell]

Create two input clocks on the ARMSSE devices, one for the normal
MAINCLK, and one for the 32KHz S32KCLK, and wire these up to the
appropriate devices.  The old property-based clock frequency setting
will remain in place until conversion is complete.

This is a migration compatibility break for machines mps2-an505,
mps2-an521, musca-a, musca-b1.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Luc Michel <luc@lmichel.fr>
Message-id: 20210121190622.22000-12-peter.maydell@linaro.org
---
 include/hw/arm/armsse.h |  6 ++++++
 hw/arm/armsse.c         | 17 +++++++++++++++--
 2 files changed, 21 insertions(+), 2 deletions(-)

diff --git a/include/hw/arm/armsse.h b/include/hw/arm/armsse.h
index 4860a793f4b..bfa1e79c4fe 100644
--- a/include/hw/arm/armsse.h
+++ b/include/hw/arm/armsse.h
@@ -37,6 +37,8 @@
  *  per-CPU identity and control register blocks
  *
  * QEMU interface:
+ *  + Clock input "MAINCLK": clock for CPUs and most peripherals
+ *  + Clock input "S32KCLK": slow 32KHz clock used for a few peripherals
  *  + QOM property "memory" is a MemoryRegion containing the devices provided
  *    by the board model.
  *  + QOM property "MAINCLK_FRQ" is the frequency of the main system clock
@@ -103,6 +105,7 @@
 #include "hw/misc/armsse-mhu.h"
 #include "hw/misc/unimp.h"
 #include "hw/or-irq.h"
+#include "hw/clock.h"
 #include "hw/core/split-irq.h"
 #include "hw/cpu/cluster.h"
 #include "qom/object.h"
@@ -209,6 +212,9 @@ struct ARMSSE {
 
     uint32_t nsccfg;
 
+    Clock *mainclk;
+    Clock *s32kclk;
+
     /* Properties */
     MemoryRegion *board_memory;
     uint32_t exp_numirq;
diff --git a/hw/arm/armsse.c b/hw/arm/armsse.c
index d2ba0459c44..4349ce9bfdb 100644
--- a/hw/arm/armsse.c
+++ b/hw/arm/armsse.c
@@ -21,6 +21,7 @@
 #include "hw/arm/armsse.h"
 #include "hw/arm/boot.h"
 #include "hw/irq.h"
+#include "hw/qdev-clock.h"
 
 /* Format of the System Information block SYS_CONFIG register */
 typedef enum SysConfigFormat {
@@ -241,6 +242,9 @@ static void armsse_init(Object *obj)
     assert(info->sram_banks <= MAX_SRAM_BANKS);
     assert(info->num_cpus <= SSE_MAX_CPUS);
 
+    s->mainclk = qdev_init_clock_in(DEVICE(s), "MAINCLK", NULL, NULL);
+    s->s32kclk = qdev_init_clock_in(DEVICE(s), "S32KCLK", NULL, NULL);
+
     memory_region_init(&s->container, obj, "armsse-container", UINT64_MAX);
 
     for (i = 0; i < info->num_cpus; i++) {
@@ -711,6 +715,7 @@ static void armsse_realize(DeviceState *dev, Error **errp)
      * map its upstream ends to the right place in the container.
      */
     qdev_prop_set_uint32(DEVICE(&s->timer0), "pclk-frq", s->mainclk_frq);
+    qdev_connect_clock_in(DEVICE(&s->timer0), "pclk", s->mainclk);
     if (!sysbus_realize(SYS_BUS_DEVICE(&s->timer0), errp)) {
         return;
     }
@@ -721,6 +726,7 @@ static void armsse_realize(DeviceState *dev, Error **errp)
                              &error_abort);
 
     qdev_prop_set_uint32(DEVICE(&s->timer1), "pclk-frq", s->mainclk_frq);
+    qdev_connect_clock_in(DEVICE(&s->timer1), "pclk", s->mainclk);
     if (!sysbus_realize(SYS_BUS_DEVICE(&s->timer1), errp)) {
         return;
     }
@@ -731,6 +737,7 @@ static void armsse_realize(DeviceState *dev, Error **errp)
                              &error_abort);
 
     qdev_prop_set_uint32(DEVICE(&s->dualtimer), "pclk-frq", s->mainclk_frq);
+    qdev_connect_clock_in(DEVICE(&s->dualtimer), "TIMCLK", s->mainclk);
     if (!sysbus_realize(SYS_BUS_DEVICE(&s->dualtimer), errp)) {
         return;
     }
@@ -889,6 +896,7 @@ static void armsse_realize(DeviceState *dev, Error **errp)
      *   0x4002f000: S32K timer
      */
     qdev_prop_set_uint32(DEVICE(&s->s32ktimer), "pclk-frq", S32KCLK);
+    qdev_connect_clock_in(DEVICE(&s->s32ktimer), "pclk", s->s32kclk);
     if (!sysbus_realize(SYS_BUS_DEVICE(&s->s32ktimer), errp)) {
         return;
     }
@@ -982,6 +990,7 @@ static void armsse_realize(DeviceState *dev, Error **errp)
                           qdev_get_gpio_in_named(DEVICE(&s->armv7m), "NMI", 0));
 
     qdev_prop_set_uint32(DEVICE(&s->s32kwatchdog), "wdogclk-frq", S32KCLK);
+    qdev_connect_clock_in(DEVICE(&s->s32kwatchdog), "WDOGCLK", s->s32kclk);
     if (!sysbus_realize(SYS_BUS_DEVICE(&s->s32kwatchdog), errp)) {
         return;
     }
@@ -992,6 +1001,7 @@ static void armsse_realize(DeviceState *dev, Error **errp)
     /* 0x40080000 .. 0x4008ffff : ARMSSE second Base peripheral region */
 
     qdev_prop_set_uint32(DEVICE(&s->nswatchdog), "wdogclk-frq", s->mainclk_frq);
+    qdev_connect_clock_in(DEVICE(&s->nswatchdog), "WDOGCLK", s->mainclk);
     if (!sysbus_realize(SYS_BUS_DEVICE(&s->nswatchdog), errp)) {
         return;
     }
@@ -1000,6 +1010,7 @@ static void armsse_realize(DeviceState *dev, Error **errp)
     sysbus_mmio_map(SYS_BUS_DEVICE(&s->nswatchdog), 0, 0x40081000);
 
     qdev_prop_set_uint32(DEVICE(&s->swatchdog), "wdogclk-frq", s->mainclk_frq);
+    qdev_connect_clock_in(DEVICE(&s->swatchdog), "WDOGCLK", s->mainclk);
     if (!sysbus_realize(SYS_BUS_DEVICE(&s->swatchdog), errp)) {
         return;
     }
@@ -1127,9 +1138,11 @@ static void armsse_idau_check(IDAUInterface *ii, uint32_t address,
 
 static const VMStateDescription armsse_vmstate = {
     .name = "iotkit",
-    .version_id = 1,
-    .minimum_version_id = 1,
+    .version_id = 2,
+    .minimum_version_id = 2,
     .fields = (VMStateField[]) {
+        VMSTATE_CLOCK(mainclk, ARMSSE),
+        VMSTATE_CLOCK(s32kclk, ARMSSE),
         VMSTATE_UINT32(nsccfg, ARMSSE),
         VMSTATE_END_OF_LIST()
     }
-- 
2.20.1

[PATCH v2 12/25] hw/arm/mps2: Inline CMSDK_APB_TIMER creation

[Peter Maydell]

The old-style convenience function cmsdk_apb_timer_create() for
creating CMSDK_APB_TIMER objects is used in only two places in
mps2.c.  Most of the rest of the code in that file uses the new
"initialize in place" coding style.

We want to connect up a Clock object which should be done between the
object creation and realization; rather than adding a Clock* argument
to the convenience function, convert the timer creation code in
mps2.c to the same style as is used already for the watchdog,
dualtimer and other devices, and delete the now-unused convenience
function.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Luc Michel <luc@lmichel.fr>
Message-id: 20210121190622.22000-13-peter.maydell@linaro.org
---
 include/hw/timer/cmsdk-apb-timer.h | 21 ---------------------
 hw/arm/mps2.c                      | 18 ++++++++++++++++--
 2 files changed, 16 insertions(+), 23 deletions(-)

diff --git a/include/hw/timer/cmsdk-apb-timer.h b/include/hw/timer/cmsdk-apb-timer.h
index fc2aa97acac..54f7ec8c502 100644
--- a/include/hw/timer/cmsdk-apb-timer.h
+++ b/include/hw/timer/cmsdk-apb-timer.h
@@ -45,25 +45,4 @@ struct CMSDKAPBTimer {
     uint32_t intstatus;
 };
 
-/**
- * cmsdk_apb_timer_create - convenience function to create TYPE_CMSDK_APB_TIMER
- * @addr: location in system memory to map registers
- * @pclk_frq: frequency in Hz of the PCLK clock (used for calculating baud rate)
- */
-static inline DeviceState *cmsdk_apb_timer_create(hwaddr addr,
-                                                 qemu_irq timerint,
-                                                 uint32_t pclk_frq)
-{
-    DeviceState *dev;
-    SysBusDevice *s;
-
-    dev = qdev_new(TYPE_CMSDK_APB_TIMER);
-    s = SYS_BUS_DEVICE(dev);
-    qdev_prop_set_uint32(dev, "pclk-frq", pclk_frq);
-    sysbus_realize_and_unref(s, &error_fatal);
-    sysbus_mmio_map(s, 0, addr);
-    sysbus_connect_irq(s, 0, timerint);
-    return dev;
-}
-
 #endif
diff --git a/hw/arm/mps2.c b/hw/arm/mps2.c
index 9a8b23c64ce..f762d1b46af 100644
--- a/hw/arm/mps2.c
+++ b/hw/arm/mps2.c
@@ -83,6 +83,7 @@ struct MPS2MachineState {
     /* CMSDK APB subsystem */
     CMSDKAPBDualTimer dualtimer;
     CMSDKAPBWatchdog watchdog;
+    CMSDKAPBTimer timer[2];
 };
 
 #define TYPE_MPS2_MACHINE "mps2"
@@ -330,8 +331,21 @@ static void mps2_common_init(MachineState *machine)
     }
 
     /* CMSDK APB subsystem */
-    cmsdk_apb_timer_create(0x40000000, qdev_get_gpio_in(armv7m, 8), SYSCLK_FRQ);
-    cmsdk_apb_timer_create(0x40001000, qdev_get_gpio_in(armv7m, 9), SYSCLK_FRQ);
+    for (i = 0; i < ARRAY_SIZE(mms->timer); i++) {
+        g_autofree char *name = g_strdup_printf("timer%d", i);
+        hwaddr base = 0x40000000 + i * 0x1000;
+        int irqno = 8 + i;
+        SysBusDevice *sbd;
+
+        object_initialize_child(OBJECT(mms), name, &mms->timer[i],
+                                TYPE_CMSDK_APB_TIMER);
+        sbd = SYS_BUS_DEVICE(&mms->timer[i]);
+        qdev_prop_set_uint32(DEVICE(&mms->timer[i]), "pclk-frq", SYSCLK_FRQ);
+        sysbus_realize_and_unref(sbd, &error_fatal);
+        sysbus_mmio_map(sbd, 0, base);
+        sysbus_connect_irq(sbd, 0, qdev_get_gpio_in(armv7m, irqno));
+    }
+
     object_initialize_child(OBJECT(mms), "dualtimer", &mms->dualtimer,
                             TYPE_CMSDK_APB_DUALTIMER);
     qdev_prop_set_uint32(DEVICE(&mms->dualtimer), "pclk-frq", SYSCLK_FRQ);
-- 
2.20.1

[PATCH v2 13/25] hw/arm/mps2: Create and connect SYSCLK Clock

[Peter Maydell]

Create a fixed-frequency Clock object to be the SYSCLK, and wire it
up to the devices that require it.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Luc Michel <luc@lmichel.fr>
Message-id: 20210121190622.22000-14-peter.maydell@linaro.org
---
 hw/arm/mps2.c | 9 +++++++++
 1 file changed, 9 insertions(+)

diff --git a/hw/arm/mps2.c b/hw/arm/mps2.c
index f762d1b46af..cd1c215f941 100644
--- a/hw/arm/mps2.c
+++ b/hw/arm/mps2.c
@@ -46,6 +46,7 @@
 #include "hw/net/lan9118.h"
 #include "net/net.h"
 #include "hw/watchdog/cmsdk-apb-watchdog.h"
+#include "hw/qdev-clock.h"
 #include "qom/object.h"
 
 typedef enum MPS2FPGAType {
@@ -84,6 +85,7 @@ struct MPS2MachineState {
     CMSDKAPBDualTimer dualtimer;
     CMSDKAPBWatchdog watchdog;
     CMSDKAPBTimer timer[2];
+    Clock *sysclk;
 };
 
 #define TYPE_MPS2_MACHINE "mps2"
@@ -140,6 +142,10 @@ static void mps2_common_init(MachineState *machine)
         exit(EXIT_FAILURE);
     }
 
+    /* This clock doesn't need migration because it is fixed-frequency */
+    mms->sysclk = clock_new(OBJECT(machine), "SYSCLK");
+    clock_set_hz(mms->sysclk, SYSCLK_FRQ);
+
     /* The FPGA images have an odd combination of different RAMs,
      * because in hardware they are different implementations and
      * connected to different buses, giving varying performance/size
@@ -341,6 +347,7 @@ static void mps2_common_init(MachineState *machine)
                                 TYPE_CMSDK_APB_TIMER);
         sbd = SYS_BUS_DEVICE(&mms->timer[i]);
         qdev_prop_set_uint32(DEVICE(&mms->timer[i]), "pclk-frq", SYSCLK_FRQ);
+        qdev_connect_clock_in(DEVICE(&mms->timer[i]), "pclk", mms->sysclk);
         sysbus_realize_and_unref(sbd, &error_fatal);
         sysbus_mmio_map(sbd, 0, base);
         sysbus_connect_irq(sbd, 0, qdev_get_gpio_in(armv7m, irqno));
@@ -349,6 +356,7 @@ static void mps2_common_init(MachineState *machine)
     object_initialize_child(OBJECT(mms), "dualtimer", &mms->dualtimer,
                             TYPE_CMSDK_APB_DUALTIMER);
     qdev_prop_set_uint32(DEVICE(&mms->dualtimer), "pclk-frq", SYSCLK_FRQ);
+    qdev_connect_clock_in(DEVICE(&mms->dualtimer), "TIMCLK", mms->sysclk);
     sysbus_realize(SYS_BUS_DEVICE(&mms->dualtimer), &error_fatal);
     sysbus_connect_irq(SYS_BUS_DEVICE(&mms->dualtimer), 0,
                        qdev_get_gpio_in(armv7m, 10));
@@ -356,6 +364,7 @@ static void mps2_common_init(MachineState *machine)
     object_initialize_child(OBJECT(mms), "watchdog", &mms->watchdog,
                             TYPE_CMSDK_APB_WATCHDOG);
     qdev_prop_set_uint32(DEVICE(&mms->watchdog), "wdogclk-frq", SYSCLK_FRQ);
+    qdev_connect_clock_in(DEVICE(&mms->watchdog), "WDOGCLK", mms->sysclk);
     sysbus_realize(SYS_BUS_DEVICE(&mms->watchdog), &error_fatal);
     sysbus_connect_irq(SYS_BUS_DEVICE(&mms->watchdog), 0,
                        qdev_get_gpio_in_named(armv7m, "NMI", 0));
-- 
2.20.1

[PATCH v2 14/25] hw/arm/mps2-tz: Create and connect ARMSSE Clocks

[Peter Maydell]

Create and connect the two clocks needed by the ARMSSE.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Luc Michel <luc@lmichel.fr>
Message-id: 20210121190622.22000-15-peter.maydell@linaro.org
---
 hw/arm/mps2-tz.c | 13 +++++++++++++
 1 file changed, 13 insertions(+)

diff --git a/hw/arm/mps2-tz.c b/hw/arm/mps2-tz.c
index 6a9eed9022a..7acdf490f28 100644
--- a/hw/arm/mps2-tz.c
+++ b/hw/arm/mps2-tz.c
@@ -62,6 +62,7 @@
 #include "hw/net/lan9118.h"
 #include "net/net.h"
 #include "hw/core/split-irq.h"
+#include "hw/qdev-clock.h"
 #include "qom/object.h"
 
 #define MPS2TZ_NUMIRQ 92
@@ -100,6 +101,8 @@ struct MPS2TZMachineState {
     qemu_or_irq uart_irq_orgate;
     DeviceState *lan9118;
     SplitIRQ cpu_irq_splitter[MPS2TZ_NUMIRQ];
+    Clock *sysclk;
+    Clock *s32kclk;
 };
 
 #define TYPE_MPS2TZ_MACHINE "mps2tz"
@@ -110,6 +113,8 @@ OBJECT_DECLARE_TYPE(MPS2TZMachineState, MPS2TZMachineClass, MPS2TZ_MACHINE)
 
 /* Main SYSCLK frequency in Hz */
 #define SYSCLK_FRQ 20000000
+/* Slow 32Khz S32KCLK frequency in Hz */
+#define S32KCLK_FRQ (32 * 1000)
 
 /* Create an alias of an entire original MemoryRegion @orig
  * located at @base in the memory map.
@@ -396,6 +401,12 @@ static void mps2tz_common_init(MachineState *machine)
         exit(EXIT_FAILURE);
     }
 
+    /* These clocks don't need migration because they are fixed-frequency */
+    mms->sysclk = clock_new(OBJECT(machine), "SYSCLK");
+    clock_set_hz(mms->sysclk, SYSCLK_FRQ);
+    mms->s32kclk = clock_new(OBJECT(machine), "S32KCLK");
+    clock_set_hz(mms->s32kclk, S32KCLK_FRQ);
+
     object_initialize_child(OBJECT(machine), TYPE_IOTKIT, &mms->iotkit,
                             mmc->armsse_type);
     iotkitdev = DEVICE(&mms->iotkit);
@@ -403,6 +414,8 @@ static void mps2tz_common_init(MachineState *machine)
                              OBJECT(system_memory), &error_abort);
     qdev_prop_set_uint32(iotkitdev, "EXP_NUMIRQ", MPS2TZ_NUMIRQ);
     qdev_prop_set_uint32(iotkitdev, "MAINCLK_FRQ", SYSCLK_FRQ);
+    qdev_connect_clock_in(iotkitdev, "MAINCLK", mms->sysclk);
+    qdev_connect_clock_in(iotkitdev, "S32KCLK", mms->s32kclk);
     sysbus_realize(SYS_BUS_DEVICE(&mms->iotkit), &error_fatal);
 
     /*
-- 
2.20.1

[PATCH v2 15/25] hw/arm/musca: Create and connect ARMSSE Clocks

[Peter Maydell]

Create and connect the two clocks needed by the ARMSSE.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Luc Michel <luc@lmichel.fr>
Message-id: 20210121190622.22000-16-peter.maydell@linaro.org
---
 hw/arm/musca.c | 12 ++++++++++++
 1 file changed, 12 insertions(+)

diff --git a/hw/arm/musca.c b/hw/arm/musca.c
index d82bef11cf2..a9292482a06 100644
--- a/hw/arm/musca.c
+++ b/hw/arm/musca.c
@@ -33,6 +33,7 @@
 #include "hw/misc/tz-ppc.h"
 #include "hw/misc/unimp.h"
 #include "hw/rtc/pl031.h"
+#include "hw/qdev-clock.h"
 #include "qom/object.h"
 
 #define MUSCA_NUMIRQ_MAX 96
@@ -82,6 +83,8 @@ struct MuscaMachineState {
     UnimplementedDeviceState sdio;
     UnimplementedDeviceState gpio;
     UnimplementedDeviceState cryptoisland;
+    Clock *sysclk;
+    Clock *s32kclk;
 };
 
 #define TYPE_MUSCA_MACHINE "musca"
@@ -96,6 +99,8 @@ OBJECT_DECLARE_TYPE(MuscaMachineState, MuscaMachineClass, MUSCA_MACHINE)
  * don't model that in our SSE-200 model yet.
  */
 #define SYSCLK_FRQ 40000000
+/* Slow 32Khz S32KCLK frequency in Hz */
+#define S32KCLK_FRQ (32 * 1000)
 
 static qemu_irq get_sse_irq_in(MuscaMachineState *mms, int irqno)
 {
@@ -367,6 +372,11 @@ static void musca_init(MachineState *machine)
         exit(1);
     }
 
+    mms->sysclk = clock_new(OBJECT(machine), "SYSCLK");
+    clock_set_hz(mms->sysclk, SYSCLK_FRQ);
+    mms->s32kclk = clock_new(OBJECT(machine), "S32KCLK");
+    clock_set_hz(mms->s32kclk, S32KCLK_FRQ);
+
     object_initialize_child(OBJECT(machine), "sse-200", &mms->sse,
                             TYPE_SSE200);
     ssedev = DEVICE(&mms->sse);
@@ -376,6 +386,8 @@ static void musca_init(MachineState *machine)
     qdev_prop_set_uint32(ssedev, "init-svtor", mmc->init_svtor);
     qdev_prop_set_uint32(ssedev, "SRAM_ADDR_WIDTH", mmc->sram_addr_width);
     qdev_prop_set_uint32(ssedev, "MAINCLK_FRQ", SYSCLK_FRQ);
+    qdev_connect_clock_in(ssedev, "MAINCLK", mms->sysclk);
+    qdev_connect_clock_in(ssedev, "S32KCLK", mms->s32kclk);
     /*
      * Musca-A takes the default SSE-200 FPU/DSP settings (ie no for
      * CPU0 and yes for CPU1); Musca-B1 explicitly enables them for CPU0.
-- 
2.20.1

[PATCH v2 16/25] hw/arm/stellaris: Convert SSYS to QOM device

[Peter Maydell]

Convert the SSYS code in the Stellaris boards (which encapsulates the
system registers) to a proper QOM device.  This will provide us with
somewhere to put the output Clock whose frequency depends on the
setting of the PLL configuration registers.

This is a migration compatibility break for lm3s811evb, lm3s6965evb.

We use 3-phase reset here because the Clock will need to propagate
its value in the hold phase.

For the moment we reset the device during the board creation so that
the system_clock_scale global gets set; this will be removed in a
subsequent commit.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Luc Michel <luc@lmichel.fr>
Message-id: 20210121190622.22000-17-peter.maydell@linaro.org
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
---
 hw/arm/stellaris.c | 132 ++++++++++++++++++++++++++++++++++++---------
 1 file changed, 107 insertions(+), 25 deletions(-)

diff --git a/hw/arm/stellaris.c b/hw/arm/stellaris.c
index 652823195b1..0194ede2fe0 100644
--- a/hw/arm/stellaris.c
+++ b/hw/arm/stellaris.c
@@ -357,7 +357,12 @@ static void stellaris_gptm_realize(DeviceState *dev, Error **errp)
 
 /* System controller.  */
 
-typedef struct {
+#define TYPE_STELLARIS_SYS "stellaris-sys"
+OBJECT_DECLARE_SIMPLE_TYPE(ssys_state, STELLARIS_SYS)
+
+struct ssys_state {
+    SysBusDevice parent_obj;
+
     MemoryRegion iomem;
     uint32_t pborctl;
     uint32_t ldopctl;
@@ -371,11 +376,18 @@ typedef struct {
     uint32_t dcgc[3];
     uint32_t clkvclr;
     uint32_t ldoarst;
+    qemu_irq irq;
+    /* Properties (all read-only registers) */
     uint32_t user0;
     uint32_t user1;
-    qemu_irq irq;
-    stellaris_board_info *board;
-} ssys_state;
+    uint32_t did0;
+    uint32_t did1;
+    uint32_t dc0;
+    uint32_t dc1;
+    uint32_t dc2;
+    uint32_t dc3;
+    uint32_t dc4;
+};
 
 static void ssys_update(ssys_state *s)
 {
@@ -430,7 +442,7 @@ static uint32_t pllcfg_fury[16] = {
 
 static int ssys_board_class(const ssys_state *s)
 {
-    uint32_t did0 = s->board->did0;
+    uint32_t did0 = s->did0;
     switch (did0 & DID0_VER_MASK) {
     case DID0_VER_0:
         return DID0_CLASS_SANDSTORM;
@@ -456,19 +468,19 @@ static uint64_t ssys_read(void *opaque, hwaddr offset,
 
     switch (offset) {
     case 0x000: /* DID0 */
-        return s->board->did0;
+        return s->did0;
     case 0x004: /* DID1 */
-        return s->board->did1;
+        return s->did1;
     case 0x008: /* DC0 */
-        return s->board->dc0;
+        return s->dc0;
     case 0x010: /* DC1 */
-        return s->board->dc1;
+        return s->dc1;
     case 0x014: /* DC2 */
-        return s->board->dc2;
+        return s->dc2;
     case 0x018: /* DC3 */
-        return s->board->dc3;
+        return s->dc3;
     case 0x01c: /* DC4 */
-        return s->board->dc4;
+        return s->dc4;
     case 0x030: /* PBORCTL */
         return s->pborctl;
     case 0x034: /* LDOPCTL */
@@ -646,9 +658,9 @@ static const MemoryRegionOps ssys_ops = {
     .endianness = DEVICE_NATIVE_ENDIAN,
 };
 
-static void ssys_reset(void *opaque)
+static void stellaris_sys_reset_enter(Object *obj, ResetType type)
 {
-    ssys_state *s = (ssys_state *)opaque;
+    ssys_state *s = STELLARIS_SYS(obj);
 
     s->pborctl = 0x7ffd;
     s->rcc = 0x078e3ac0;
@@ -661,9 +673,19 @@ static void ssys_reset(void *opaque)
     s->rcgc[0] = 1;
     s->scgc[0] = 1;
     s->dcgc[0] = 1;
+}
+
+static void stellaris_sys_reset_hold(Object *obj)
+{
+    ssys_state *s = STELLARIS_SYS(obj);
+
     ssys_calculate_system_clock(s);
 }
 
+static void stellaris_sys_reset_exit(Object *obj)
+{
+}
+
 static int stellaris_sys_post_load(void *opaque, int version_id)
 {
     ssys_state *s = opaque;
@@ -695,27 +717,66 @@ static const VMStateDescription vmstate_stellaris_sys = {
     }
 };
 
+static Property stellaris_sys_properties[] = {
+    DEFINE_PROP_UINT32("user0", ssys_state, user0, 0),
+    DEFINE_PROP_UINT32("user1", ssys_state, user1, 0),
+    DEFINE_PROP_UINT32("did0", ssys_state, did0, 0),
+    DEFINE_PROP_UINT32("did1", ssys_state, did1, 0),
+    DEFINE_PROP_UINT32("dc0", ssys_state, dc0, 0),
+    DEFINE_PROP_UINT32("dc1", ssys_state, dc1, 0),
+    DEFINE_PROP_UINT32("dc2", ssys_state, dc2, 0),
+    DEFINE_PROP_UINT32("dc3", ssys_state, dc3, 0),
+    DEFINE_PROP_UINT32("dc4", ssys_state, dc4, 0),
+    DEFINE_PROP_END_OF_LIST()
+};
+
+static void stellaris_sys_instance_init(Object *obj)
+{
+    ssys_state *s = STELLARIS_SYS(obj);
+    SysBusDevice *sbd = SYS_BUS_DEVICE(s);
+
+    memory_region_init_io(&s->iomem, obj, &ssys_ops, s, "ssys", 0x00001000);
+    sysbus_init_mmio(sbd, &s->iomem);
+    sysbus_init_irq(sbd, &s->irq);
+}
+
 static int stellaris_sys_init(uint32_t base, qemu_irq irq,
                               stellaris_board_info * board,
                               uint8_t *macaddr)
 {
-    ssys_state *s;
+    DeviceState *dev = qdev_new(TYPE_STELLARIS_SYS);
+    SysBusDevice *sbd = SYS_BUS_DEVICE(dev);
 
-    s = g_new0(ssys_state, 1);
-    s->irq = irq;
-    s->board = board;
     /* Most devices come preprogrammed with a MAC address in the user data. */
-    s->user0 = macaddr[0] | (macaddr[1] << 8) | (macaddr[2] << 16);
-    s->user1 = macaddr[3] | (macaddr[4] << 8) | (macaddr[5] << 16);
+    qdev_prop_set_uint32(dev, "user0",
+                         macaddr[0] | (macaddr[1] << 8) | (macaddr[2] << 16));
+    qdev_prop_set_uint32(dev, "user1",
+                         macaddr[3] | (macaddr[4] << 8) | (macaddr[5] << 16));
+    qdev_prop_set_uint32(dev, "did0", board->did0);
+    qdev_prop_set_uint32(dev, "did1", board->did1);
+    qdev_prop_set_uint32(dev, "dc0", board->dc0);
+    qdev_prop_set_uint32(dev, "dc1", board->dc1);
+    qdev_prop_set_uint32(dev, "dc2", board->dc2);
+    qdev_prop_set_uint32(dev, "dc3", board->dc3);
+    qdev_prop_set_uint32(dev, "dc4", board->dc4);
+
+    sysbus_realize_and_unref(sbd, &error_fatal);
+    sysbus_mmio_map(sbd, 0, base);
+    sysbus_connect_irq(sbd, 0, irq);
+
+    /*
+     * Normally we should not be resetting devices like this during
+     * board creation. For the moment we need to do so, because
+     * system_clock_scale will only get set when the STELLARIS_SYS
+     * device is reset, and we need its initial value to pass to
+     * the watchdog device. This hack can be removed once the
+     * watchdog has been converted to use a Clock input instead.
+     */
+    device_cold_reset(dev);
 
-    memory_region_init_io(&s->iomem, NULL, &ssys_ops, s, "ssys", 0x00001000);
-    memory_region_add_subregion(get_system_memory(), base, &s->iomem);
-    ssys_reset(s);
-    vmstate_register(NULL, VMSTATE_INSTANCE_ID_ANY, &vmstate_stellaris_sys, s);
     return 0;
 }
 
-
 /* I2C controller.  */
 
 #define TYPE_STELLARIS_I2C "stellaris-i2c"
@@ -1553,11 +1614,32 @@ static const TypeInfo stellaris_adc_info = {
     .class_init    = stellaris_adc_class_init,
 };
 
+static void stellaris_sys_class_init(ObjectClass *klass, void *data)
+{
+    DeviceClass *dc = DEVICE_CLASS(klass);
+    ResettableClass *rc = RESETTABLE_CLASS(klass);
+
+    dc->vmsd = &vmstate_stellaris_sys;
+    rc->phases.enter = stellaris_sys_reset_enter;
+    rc->phases.hold = stellaris_sys_reset_hold;
+    rc->phases.exit = stellaris_sys_reset_exit;
+    device_class_set_props(dc, stellaris_sys_properties);
+}
+
+static const TypeInfo stellaris_sys_info = {
+    .name = TYPE_STELLARIS_SYS,
+    .parent = TYPE_SYS_BUS_DEVICE,
+    .instance_size = sizeof(ssys_state),
+    .instance_init = stellaris_sys_instance_init,
+    .class_init = stellaris_sys_class_init,
+};
+
 static void stellaris_register_types(void)
 {
     type_register_static(&stellaris_i2c_info);
     type_register_static(&stellaris_gptm_info);
     type_register_static(&stellaris_adc_info);
+    type_register_static(&stellaris_sys_info);
 }
 
 type_init(stellaris_register_types)
-- 
2.20.1

[PATCH v2 17/25] hw/arm/stellaris: Create Clock input for watchdog

[Peter Maydell]

Create and connect the Clock input for the watchdog device on the
Stellaris boards.  Because the Stellaris boards model the ability to
change the clock rate by programming PLL registers, we have to create
an output Clock on the ssys_state device and wire it up to the
watchdog.

Note that the old comment on ssys_calculate_system_clock() got the
units wrong -- system_clock_scale is in nanoseconds, not
milliseconds.  Improve the commentary to clarify how we are
calculating the period.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Luc Michel <luc@lmichel.fr>
Message-id: 20210121190622.22000-18-peter.maydell@linaro.org
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
---
 hw/arm/stellaris.c | 43 +++++++++++++++++++++++++++++++------------
 1 file changed, 31 insertions(+), 12 deletions(-)

diff --git a/hw/arm/stellaris.c b/hw/arm/stellaris.c
index 0194ede2fe0..9b67c739ef2 100644
--- a/hw/arm/stellaris.c
+++ b/hw/arm/stellaris.c
@@ -26,6 +26,7 @@
 #include "hw/watchdog/cmsdk-apb-watchdog.h"
 #include "migration/vmstate.h"
 #include "hw/misc/unimp.h"
+#include "hw/qdev-clock.h"
 #include "cpu.h"
 #include "qom/object.h"
 
@@ -377,6 +378,7 @@ struct ssys_state {
     uint32_t clkvclr;
     uint32_t ldoarst;
     qemu_irq irq;
+    Clock *sysclk;
     /* Properties (all read-only registers) */
     uint32_t user0;
     uint32_t user1;
@@ -555,15 +557,26 @@ static bool ssys_use_rcc2(ssys_state *s)
 }
 
 /*
- * Caculate the sys. clock period in ms.
+ * Calculate the system clock period. We only want to propagate
+ * this change to the rest of the system if we're not being called
+ * from migration post-load.
  */
-static void ssys_calculate_system_clock(ssys_state *s)
+static void ssys_calculate_system_clock(ssys_state *s, bool propagate_clock)
 {
+    /*
+     * SYSDIV field specifies divisor: 0 == /1, 1 == /2, etc.  Input
+     * clock is 200MHz, which is a period of 5 ns. Dividing the clock
+     * frequency by X is the same as multiplying the period by X.
+     */
     if (ssys_use_rcc2(s)) {
         system_clock_scale = 5 * (((s->rcc2 >> 23) & 0x3f) + 1);
     } else {
         system_clock_scale = 5 * (((s->rcc >> 23) & 0xf) + 1);
     }
+    clock_set_ns(s->sysclk, system_clock_scale);
+    if (propagate_clock) {
+        clock_propagate(s->sysclk);
+    }
 }
 
 static void ssys_write(void *opaque, hwaddr offset,
@@ -598,7 +611,7 @@ static void ssys_write(void *opaque, hwaddr offset,
             s->int_status |= (1 << 6);
         }
         s->rcc = value;
-        ssys_calculate_system_clock(s);
+        ssys_calculate_system_clock(s, true);
         break;
     case 0x070: /* RCC2 */
         if (ssys_board_class(s) == DID0_CLASS_SANDSTORM) {
@@ -610,7 +623,7 @@ static void ssys_write(void *opaque, hwaddr offset,
             s->int_status |= (1 << 6);
         }
         s->rcc2 = value;
-        ssys_calculate_system_clock(s);
+        ssys_calculate_system_clock(s, true);
         break;
     case 0x100: /* RCGC0 */
         s->rcgc[0] = value;
@@ -679,7 +692,8 @@ static void stellaris_sys_reset_hold(Object *obj)
 {
     ssys_state *s = STELLARIS_SYS(obj);
 
-    ssys_calculate_system_clock(s);
+    /* OK to propagate clocks from the hold phase */
+    ssys_calculate_system_clock(s, true);
 }
 
 static void stellaris_sys_reset_exit(Object *obj)
@@ -690,7 +704,7 @@ static int stellaris_sys_post_load(void *opaque, int version_id)
 {
     ssys_state *s = opaque;
 
-    ssys_calculate_system_clock(s);
+    ssys_calculate_system_clock(s, false);
 
     return 0;
 }
@@ -713,6 +727,7 @@ static const VMStateDescription vmstate_stellaris_sys = {
         VMSTATE_UINT32_ARRAY(dcgc, ssys_state, 3),
         VMSTATE_UINT32(clkvclr, ssys_state),
         VMSTATE_UINT32(ldoarst, ssys_state),
+        /* No field for sysclk -- handled in post-load instead */
         VMSTATE_END_OF_LIST()
     }
 };
@@ -738,11 +753,12 @@ static void stellaris_sys_instance_init(Object *obj)
     memory_region_init_io(&s->iomem, obj, &ssys_ops, s, "ssys", 0x00001000);
     sysbus_init_mmio(sbd, &s->iomem);
     sysbus_init_irq(sbd, &s->irq);
+    s->sysclk = qdev_init_clock_out(DEVICE(s), "SYSCLK");
 }
 
-static int stellaris_sys_init(uint32_t base, qemu_irq irq,
-                              stellaris_board_info * board,
-                              uint8_t *macaddr)
+static DeviceState *stellaris_sys_init(uint32_t base, qemu_irq irq,
+                                       stellaris_board_info *board,
+                                       uint8_t *macaddr)
 {
     DeviceState *dev = qdev_new(TYPE_STELLARIS_SYS);
     SysBusDevice *sbd = SYS_BUS_DEVICE(dev);
@@ -774,7 +790,7 @@ static int stellaris_sys_init(uint32_t base, qemu_irq irq,
      */
     device_cold_reset(dev);
 
-    return 0;
+    return dev;
 }
 
 /* I2C controller.  */
@@ -1341,6 +1357,7 @@ static void stellaris_init(MachineState *ms, stellaris_board_info *board)
     int flash_size;
     I2CBus *i2c;
     DeviceState *dev;
+    DeviceState *ssys_dev;
     int i;
     int j;
 
@@ -1391,8 +1408,8 @@ static void stellaris_init(MachineState *ms, stellaris_board_info *board)
         }
     }
 
-    stellaris_sys_init(0x400fe000, qdev_get_gpio_in(nvic, 28),
-                       board, nd_table[0].macaddr.a);
+    ssys_dev = stellaris_sys_init(0x400fe000, qdev_get_gpio_in(nvic, 28),
+                                  board, nd_table[0].macaddr.a);
 
 
     if (board->dc1 & (1 << 3)) { /* watchdog present */
@@ -1401,6 +1418,8 @@ static void stellaris_init(MachineState *ms, stellaris_board_info *board)
         /* system_clock_scale is valid now */
         uint32_t mainclk = NANOSECONDS_PER_SECOND / system_clock_scale;
         qdev_prop_set_uint32(dev, "wdogclk-frq", mainclk);
+        qdev_connect_clock_in(dev, "WDOGCLK",
+                              qdev_get_clock_out(ssys_dev, "SYSCLK"));
 
         sysbus_realize_and_unref(SYS_BUS_DEVICE(dev), &error_fatal);
         sysbus_mmio_map(SYS_BUS_DEVICE(dev),
-- 
2.20.1

[PATCH v2 18/25] hw/timer/cmsdk-apb-timer: Convert to use Clock input

[Peter Maydell]

Switch the CMSDK APB timer device over to using its Clock input; the
pclk-frq property is now ignored.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Luc Michel <luc@lmichel.fr>
Message-id: 20210121190622.22000-19-peter.maydell@linaro.org
---
 hw/timer/cmsdk-apb-timer.c | 18 ++++++++++++++----
 1 file changed, 14 insertions(+), 4 deletions(-)

diff --git a/hw/timer/cmsdk-apb-timer.c b/hw/timer/cmsdk-apb-timer.c
index c63145ff553..f053146d88f 100644
--- a/hw/timer/cmsdk-apb-timer.c
+++ b/hw/timer/cmsdk-apb-timer.c
@@ -204,6 +204,15 @@ static void cmsdk_apb_timer_reset(DeviceState *dev)
     ptimer_transaction_commit(s->timer);
 }
 
+static void cmsdk_apb_timer_clk_update(void *opaque)
+{
+    CMSDKAPBTimer *s = CMSDK_APB_TIMER(opaque);
+
+    ptimer_transaction_begin(s->timer);
+    ptimer_set_period_from_clock(s->timer, s->pclk, 1);
+    ptimer_transaction_commit(s->timer);
+}
+
 static void cmsdk_apb_timer_init(Object *obj)
 {
     SysBusDevice *sbd = SYS_BUS_DEVICE(obj);
@@ -213,15 +222,16 @@ static void cmsdk_apb_timer_init(Object *obj)
                           s, "cmsdk-apb-timer", 0x1000);
     sysbus_init_mmio(sbd, &s->iomem);
     sysbus_init_irq(sbd, &s->timerint);
-    s->pclk = qdev_init_clock_in(DEVICE(s), "pclk", NULL, NULL);
+    s->pclk = qdev_init_clock_in(DEVICE(s), "pclk",
+                                 cmsdk_apb_timer_clk_update, s);
 }
 
 static void cmsdk_apb_timer_realize(DeviceState *dev, Error **errp)
 {
     CMSDKAPBTimer *s = CMSDK_APB_TIMER(dev);
 
-    if (s->pclk_frq == 0) {
-        error_setg(errp, "CMSDK APB timer: pclk-frq property must be set");
+    if (!clock_has_source(s->pclk)) {
+        error_setg(errp, "CMSDK APB timer: pclk clock must be connected");
         return;
     }
 
@@ -232,7 +242,7 @@ static void cmsdk_apb_timer_realize(DeviceState *dev, Error **errp)
                            PTIMER_POLICY_NO_COUNTER_ROUND_DOWN);
 
     ptimer_transaction_begin(s->timer);
-    ptimer_set_freq(s->timer, s->pclk_frq);
+    ptimer_set_period_from_clock(s->timer, s->pclk, 1);
     ptimer_transaction_commit(s->timer);
 }
 
-- 
2.20.1

[PATCH v2 19/25] hw/timer/cmsdk-apb-dualtimer: Convert to use Clock input

[Peter Maydell]

Switch the CMSDK APB dualtimer device over to using its Clock input;
the pclk-frq property is now ignored.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Luc Michel <luc@lmichel.fr>
Message-id: 20210121190622.22000-20-peter.maydell@linaro.org
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
---
 hw/timer/cmsdk-apb-dualtimer.c | 42 ++++++++++++++++++++++++++++++----
 1 file changed, 37 insertions(+), 5 deletions(-)

diff --git a/hw/timer/cmsdk-apb-dualtimer.c b/hw/timer/cmsdk-apb-dualtimer.c
index 781b496037b..828127b366f 100644
--- a/hw/timer/cmsdk-apb-dualtimer.c
+++ b/hw/timer/cmsdk-apb-dualtimer.c
@@ -106,6 +106,22 @@ static void cmsdk_apb_dualtimer_update(CMSDKAPBDualTimer *s)
     qemu_set_irq(s->timerintc, timintc);
 }
 
+static int cmsdk_dualtimermod_divisor(CMSDKAPBDualTimerModule *m)
+{
+    /* Return the divisor set by the current CONTROL.PRESCALE value */
+    switch (FIELD_EX32(m->control, CONTROL, PRESCALE)) {
+    case 0:
+        return 1;
+    case 1:
+        return 16;
+    case 2:
+    case 3: /* UNDEFINED, we treat like 2 (and complained when it was set) */
+        return 256;
+    default:
+        g_assert_not_reached();
+    }
+}
+
 static void cmsdk_dualtimermod_write_control(CMSDKAPBDualTimerModule *m,
                                              uint32_t newctrl)
 {
@@ -146,7 +162,7 @@ static void cmsdk_dualtimermod_write_control(CMSDKAPBDualTimerModule *m,
         default:
             g_assert_not_reached();
         }
-        ptimer_set_freq(m->timer, m->parent->pclk_frq / divisor);
+        ptimer_set_period_from_clock(m->timer, m->parent->timclk, divisor);
     }
 
     if (changed & R_CONTROL_MODE_MASK) {
@@ -414,7 +430,8 @@ static void cmsdk_dualtimermod_reset(CMSDKAPBDualTimerModule *m)
      * limit must both be set to 0xffff, so we wrap at 16 bits.
      */
     ptimer_set_limit(m->timer, 0xffff, 1);
-    ptimer_set_freq(m->timer, m->parent->pclk_frq);
+    ptimer_set_period_from_clock(m->timer, m->parent->timclk,
+                                 cmsdk_dualtimermod_divisor(m));
     ptimer_transaction_commit(m->timer);
 }
 
@@ -432,6 +449,20 @@ static void cmsdk_apb_dualtimer_reset(DeviceState *dev)
     s->timeritop = 0;
 }
 
+static void cmsdk_apb_dualtimer_clk_update(void *opaque)
+{
+    CMSDKAPBDualTimer *s = CMSDK_APB_DUALTIMER(opaque);
+    int i;
+
+    for (i = 0; i < ARRAY_SIZE(s->timermod); i++) {
+        CMSDKAPBDualTimerModule *m = &s->timermod[i];
+        ptimer_transaction_begin(m->timer);
+        ptimer_set_period_from_clock(m->timer, m->parent->timclk,
+                                     cmsdk_dualtimermod_divisor(m));
+        ptimer_transaction_commit(m->timer);
+    }
+}
+
 static void cmsdk_apb_dualtimer_init(Object *obj)
 {
     SysBusDevice *sbd = SYS_BUS_DEVICE(obj);
@@ -446,7 +477,8 @@ static void cmsdk_apb_dualtimer_init(Object *obj)
     for (i = 0; i < ARRAY_SIZE(s->timermod); i++) {
         sysbus_init_irq(sbd, &s->timermod[i].timerint);
     }
-    s->timclk = qdev_init_clock_in(DEVICE(s), "TIMCLK", NULL, NULL);
+    s->timclk = qdev_init_clock_in(DEVICE(s), "TIMCLK",
+                                   cmsdk_apb_dualtimer_clk_update, s);
 }
 
 static void cmsdk_apb_dualtimer_realize(DeviceState *dev, Error **errp)
@@ -454,8 +486,8 @@ static void cmsdk_apb_dualtimer_realize(DeviceState *dev, Error **errp)
     CMSDKAPBDualTimer *s = CMSDK_APB_DUALTIMER(dev);
     int i;
 
-    if (s->pclk_frq == 0) {
-        error_setg(errp, "CMSDK APB timer: pclk-frq property must be set");
+    if (!clock_has_source(s->timclk)) {
+        error_setg(errp, "CMSDK APB dualtimer: TIMCLK clock must be connected");
         return;
     }
 
-- 
2.20.1

[PATCH v2 20/25] hw/watchdog/cmsdk-apb-watchdog: Convert to use Clock input

[Peter Maydell]

Switch the CMSDK APB watchdog device over to using its Clock input;
the wdogclk_frq property is now ignored.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Luc Michel <luc@lmichel.fr>
Message-id: 20210121190622.22000-21-peter.maydell@linaro.org
---
 hw/watchdog/cmsdk-apb-watchdog.c | 18 ++++++++++++++----
 1 file changed, 14 insertions(+), 4 deletions(-)

diff --git a/hw/watchdog/cmsdk-apb-watchdog.c b/hw/watchdog/cmsdk-apb-watchdog.c
index b03bcb73628..9cad0c67da4 100644
--- a/hw/watchdog/cmsdk-apb-watchdog.c
+++ b/hw/watchdog/cmsdk-apb-watchdog.c
@@ -310,6 +310,15 @@ static void cmsdk_apb_watchdog_reset(DeviceState *dev)
     ptimer_transaction_commit(s->timer);
 }
 
+static void cmsdk_apb_watchdog_clk_update(void *opaque)
+{
+    CMSDKAPBWatchdog *s = CMSDK_APB_WATCHDOG(opaque);
+
+    ptimer_transaction_begin(s->timer);
+    ptimer_set_period_from_clock(s->timer, s->wdogclk, 1);
+    ptimer_transaction_commit(s->timer);
+}
+
 static void cmsdk_apb_watchdog_init(Object *obj)
 {
     SysBusDevice *sbd = SYS_BUS_DEVICE(obj);
@@ -319,7 +328,8 @@ static void cmsdk_apb_watchdog_init(Object *obj)
                           s, "cmsdk-apb-watchdog", 0x1000);
     sysbus_init_mmio(sbd, &s->iomem);
     sysbus_init_irq(sbd, &s->wdogint);
-    s->wdogclk = qdev_init_clock_in(DEVICE(s), "WDOGCLK", NULL, NULL);
+    s->wdogclk = qdev_init_clock_in(DEVICE(s), "WDOGCLK",
+                                    cmsdk_apb_watchdog_clk_update, s);
 
     s->is_luminary = false;
     s->id = cmsdk_apb_watchdog_id;
@@ -329,9 +339,9 @@ static void cmsdk_apb_watchdog_realize(DeviceState *dev, Error **errp)
 {
     CMSDKAPBWatchdog *s = CMSDK_APB_WATCHDOG(dev);
 
-    if (s->wdogclk_frq == 0) {
+    if (!clock_has_source(s->wdogclk)) {
         error_setg(errp,
-                   "CMSDK APB watchdog: wdogclk-frq property must be set");
+                   "CMSDK APB watchdog: WDOGCLK clock must be connected");
         return;
     }
 
@@ -342,7 +352,7 @@ static void cmsdk_apb_watchdog_realize(DeviceState *dev, Error **errp)
                            PTIMER_POLICY_NO_COUNTER_ROUND_DOWN);
 
     ptimer_transaction_begin(s->timer);
-    ptimer_set_freq(s->timer, s->wdogclk_frq);
+    ptimer_set_period_from_clock(s->timer, s->wdogclk, 1);
     ptimer_transaction_commit(s->timer);
 }
 
-- 
2.20.1

[PATCH v2 21/25] tests/qtest/cmsdk-apb-watchdog-test: Test clock changes

[Peter Maydell]

Now that the CMSDK APB watchdog uses its Clock input, it will
correctly respond when the system clock frequency is changed using
the RCC register on in the Stellaris board system registers.  Test
that when the RCC register is written it causes the watchdog timer to
change speed.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Luc Michel <luc@lmichel.fr>
Message-id: 20210121190622.22000-22-peter.maydell@linaro.org
---
 tests/qtest/cmsdk-apb-watchdog-test.c | 52 +++++++++++++++++++++++++++
 1 file changed, 52 insertions(+)

diff --git a/tests/qtest/cmsdk-apb-watchdog-test.c b/tests/qtest/cmsdk-apb-watchdog-test.c
index 950f64c527b..2710cb17b86 100644
--- a/tests/qtest/cmsdk-apb-watchdog-test.c
+++ b/tests/qtest/cmsdk-apb-watchdog-test.c
@@ -15,6 +15,7 @@
  */
 
 #include "qemu/osdep.h"
+#include "qemu/bitops.h"
 #include "libqtest-single.h"
 
 /*
@@ -31,6 +32,11 @@
 #define WDOGMIS 0x14
 #define WDOGLOCK 0xc00
 
+#define SSYS_BASE 0x400fe000
+#define RCC 0x60
+#define SYSDIV_SHIFT 23
+#define SYSDIV_LENGTH 4
+
 static void test_watchdog(void)
 {
     g_assert_cmpuint(readl(WDOG_BASE + WDOGRIS), ==, 0);
@@ -61,6 +67,50 @@ static void test_watchdog(void)
     g_assert_cmpuint(readl(WDOG_BASE + WDOGRIS), ==, 0);
 }
 
+static void test_clock_change(void)
+{
+    uint32_t rcc;
+
+    /*
+     * Test that writing to the stellaris board's RCC register to
+     * change the system clock frequency causes the watchdog
+     * to change the speed it counts at.
+     */
+    g_assert_cmpuint(readl(WDOG_BASE + WDOGRIS), ==, 0);
+
+    writel(WDOG_BASE + WDOGCONTROL, 1);
+    writel(WDOG_BASE + WDOGLOAD, 1000);
+
+    /* Step to just past the 500th tick */
+    clock_step(80 * 500 + 1);
+    g_assert_cmpuint(readl(WDOG_BASE + WDOGRIS), ==, 0);
+    g_assert_cmpuint(readl(WDOG_BASE + WDOGVALUE), ==, 500);
+
+    /* Rewrite RCC.SYSDIV from 16 to 8, so the clock is now 40ns per tick */
+    rcc = readl(SSYS_BASE + RCC);
+    g_assert_cmpuint(extract32(rcc, SYSDIV_SHIFT, SYSDIV_LENGTH), ==, 0xf);
+    rcc = deposit32(rcc, SYSDIV_SHIFT, SYSDIV_LENGTH, 7);
+    writel(SSYS_BASE + RCC, rcc);
+
+    /* Just past the 1000th tick: timer should have fired */
+    clock_step(40 * 500);
+    g_assert_cmpuint(readl(WDOG_BASE + WDOGRIS), ==, 1);
+
+    g_assert_cmpuint(readl(WDOG_BASE + WDOGVALUE), ==, 0);
+
+    /* VALUE reloads at following tick */
+    clock_step(41);
+    g_assert_cmpuint(readl(WDOG_BASE + WDOGVALUE), ==, 1000);
+
+    /* Writing any value to WDOGINTCLR clears the interrupt and reloads */
+    clock_step(40 * 500);
+    g_assert_cmpuint(readl(WDOG_BASE + WDOGVALUE), ==, 500);
+    g_assert_cmpuint(readl(WDOG_BASE + WDOGRIS), ==, 1);
+    writel(WDOG_BASE + WDOGINTCLR, 0);
+    g_assert_cmpuint(readl(WDOG_BASE + WDOGVALUE), ==, 1000);
+    g_assert_cmpuint(readl(WDOG_BASE + WDOGRIS), ==, 0);
+}
+
 int main(int argc, char **argv)
 {
     int r;
@@ -70,6 +120,8 @@ int main(int argc, char **argv)
     qtest_start("-machine lm3s811evb");
 
     qtest_add_func("/cmsdk-apb-watchdog/watchdog", test_watchdog);
+    qtest_add_func("/cmsdk-apb-watchdog/watchdog_clock_change",
+                   test_clock_change);
 
     r = g_test_run();
 
-- 
2.20.1

[PATCH v2 22/25] hw/arm/armsse: Use Clock to set system_clock_scale

[Peter Maydell]

Use the MAINCLK Clock input to set the system_clock_scale variable
rather than using the mainclk_frq property.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-id: 20210121190622.22000-23-peter.maydell@linaro.org
---
v1->v2: wire armsse_mainclk_update() up as the Clock callback
---
 hw/arm/armsse.c | 24 +++++++++++++++++++-----
 1 file changed, 19 insertions(+), 5 deletions(-)

diff --git a/hw/arm/armsse.c b/hw/arm/armsse.c
index 4349ce9bfdb..9a6b24c79aa 100644
--- a/hw/arm/armsse.c
+++ b/hw/arm/armsse.c
@@ -232,6 +232,16 @@ static void armsse_forward_sec_resp_cfg(ARMSSE *s)
     qdev_connect_gpio_out(dev_splitter, 2, s->sec_resp_cfg_in);
 }
 
+static void armsse_mainclk_update(void *opaque)
+{
+    ARMSSE *s = ARM_SSE(opaque);
+    /*
+     * Set system_clock_scale from our Clock input; this is what
+     * controls the tick rate of the CPU SysTick timer.
+     */
+    system_clock_scale = clock_ticks_to_ns(s->mainclk, 1);
+}
+
 static void armsse_init(Object *obj)
 {
     ARMSSE *s = ARM_SSE(obj);
@@ -242,7 +252,8 @@ static void armsse_init(Object *obj)
     assert(info->sram_banks <= MAX_SRAM_BANKS);
     assert(info->num_cpus <= SSE_MAX_CPUS);
 
-    s->mainclk = qdev_init_clock_in(DEVICE(s), "MAINCLK", NULL, NULL);
+    s->mainclk = qdev_init_clock_in(DEVICE(s), "MAINCLK",
+                                    armsse_mainclk_update, s);
     s->s32kclk = qdev_init_clock_in(DEVICE(s), "S32KCLK", NULL, NULL);
 
     memory_region_init(&s->container, obj, "armsse-container", UINT64_MAX);
@@ -451,9 +462,11 @@ static void armsse_realize(DeviceState *dev, Error **errp)
         return;
     }
 
-    if (!s->mainclk_frq) {
-        error_setg(errp, "MAINCLK_FRQ property was not set");
-        return;
+    if (!clock_has_source(s->mainclk)) {
+        error_setg(errp, "MAINCLK clock was not connected");
+    }
+    if (!clock_has_source(s->s32kclk)) {
+        error_setg(errp, "S32KCLK clock was not connected");
     }
 
     assert(info->num_cpus <= SSE_MAX_CPUS);
@@ -1115,7 +1128,8 @@ static void armsse_realize(DeviceState *dev, Error **errp)
      */
     sysbus_init_mmio(SYS_BUS_DEVICE(s), &s->container);
 
-    system_clock_scale = NANOSECONDS_PER_SECOND / s->mainclk_frq;
+    /* Set initial system_clock_scale from MAINCLK */
+    armsse_mainclk_update(s);
 }
 
 static void armsse_idau_check(IDAUInterface *ii, uint32_t address,
-- 
2.20.1

Re: [PATCH v2 22/25] hw/arm/armsse: Use Clock to set system_clock_scale

[Luc Michel]

On 11:41 Thu 28 Jan     , Peter Maydell wrote:
> Use the MAINCLK Clock input to set the system_clock_scale variable
> rather than using the mainclk_frq property.
> 
> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
> Message-id: 20210121190622.22000-23-peter.maydell@linaro.org

Reviewed-by: Luc Michel <luc@lmichel.fr>

> ---
> v1->v2: wire armsse_mainclk_update() up as the Clock callback
> ---
>  hw/arm/armsse.c | 24 +++++++++++++++++++-----
>  1 file changed, 19 insertions(+), 5 deletions(-)
> 
> diff --git a/hw/arm/armsse.c b/hw/arm/armsse.c
> index 4349ce9bfdb..9a6b24c79aa 100644
> --- a/hw/arm/armsse.c
> +++ b/hw/arm/armsse.c
> @@ -232,6 +232,16 @@ static void armsse_forward_sec_resp_cfg(ARMSSE *s)
>      qdev_connect_gpio_out(dev_splitter, 2, s->sec_resp_cfg_in);
>  }
>  
> +static void armsse_mainclk_update(void *opaque)
> +{
> +    ARMSSE *s = ARM_SSE(opaque);
> +    /*
> +     * Set system_clock_scale from our Clock input; this is what
> +     * controls the tick rate of the CPU SysTick timer.
> +     */
> +    system_clock_scale = clock_ticks_to_ns(s->mainclk, 1);
> +}
> +
>  static void armsse_init(Object *obj)
>  {
>      ARMSSE *s = ARM_SSE(obj);
> @@ -242,7 +252,8 @@ static void armsse_init(Object *obj)
>      assert(info->sram_banks <= MAX_SRAM_BANKS);
>      assert(info->num_cpus <= SSE_MAX_CPUS);
>  
> -    s->mainclk = qdev_init_clock_in(DEVICE(s), "MAINCLK", NULL, NULL);
> +    s->mainclk = qdev_init_clock_in(DEVICE(s), "MAINCLK",
> +                                    armsse_mainclk_update, s);
>      s->s32kclk = qdev_init_clock_in(DEVICE(s), "S32KCLK", NULL, NULL);
>  
>      memory_region_init(&s->container, obj, "armsse-container", UINT64_MAX);
> @@ -451,9 +462,11 @@ static void armsse_realize(DeviceState *dev, Error **errp)
>          return;
>      }
>  
> -    if (!s->mainclk_frq) {
> -        error_setg(errp, "MAINCLK_FRQ property was not set");
> -        return;
> +    if (!clock_has_source(s->mainclk)) {
> +        error_setg(errp, "MAINCLK clock was not connected");
> +    }
> +    if (!clock_has_source(s->s32kclk)) {
> +        error_setg(errp, "S32KCLK clock was not connected");
>      }
>  
>      assert(info->num_cpus <= SSE_MAX_CPUS);
> @@ -1115,7 +1128,8 @@ static void armsse_realize(DeviceState *dev, Error **errp)
>       */
>      sysbus_init_mmio(SYS_BUS_DEVICE(s), &s->container);
>  
> -    system_clock_scale = NANOSECONDS_PER_SECOND / s->mainclk_frq;
> +    /* Set initial system_clock_scale from MAINCLK */
> +    armsse_mainclk_update(s);
>  }
>  
>  static void armsse_idau_check(IDAUInterface *ii, uint32_t address,
> -- 
> 2.20.1
> 

-- 

[PATCH v2 23/25] arm: Don't set freq properties on CMSDK timer, dualtimer, watchdog, ARMSSE

[Peter Maydell]

Remove all the code that sets frequency properties on the CMSDK
timer, dualtimer and watchdog devices and on the ARMSSE SoC device:
these properties are unused now that the devices rely on their Clock
inputs instead.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Luc Michel <luc@lmichel.fr>
Message-id: 20210121190622.22000-24-peter.maydell@linaro.org
---
 hw/arm/armsse.c    | 7 -------
 hw/arm/mps2-tz.c   | 1 -
 hw/arm/mps2.c      | 3 ---
 hw/arm/musca.c     | 1 -
 hw/arm/stellaris.c | 3 ---
 5 files changed, 15 deletions(-)

diff --git a/hw/arm/armsse.c b/hw/arm/armsse.c
index 9a6b24c79aa..34855e667de 100644
--- a/hw/arm/armsse.c
+++ b/hw/arm/armsse.c
@@ -727,7 +727,6 @@ static void armsse_realize(DeviceState *dev, Error **errp)
      * it to the appropriate PPC port; then we can realize the PPC and
      * map its upstream ends to the right place in the container.
      */
-    qdev_prop_set_uint32(DEVICE(&s->timer0), "pclk-frq", s->mainclk_frq);
     qdev_connect_clock_in(DEVICE(&s->timer0), "pclk", s->mainclk);
     if (!sysbus_realize(SYS_BUS_DEVICE(&s->timer0), errp)) {
         return;
@@ -738,7 +737,6 @@ static void armsse_realize(DeviceState *dev, Error **errp)
     object_property_set_link(OBJECT(&s->apb_ppc0), "port[0]", OBJECT(mr),
                              &error_abort);
 
-    qdev_prop_set_uint32(DEVICE(&s->timer1), "pclk-frq", s->mainclk_frq);
     qdev_connect_clock_in(DEVICE(&s->timer1), "pclk", s->mainclk);
     if (!sysbus_realize(SYS_BUS_DEVICE(&s->timer1), errp)) {
         return;
@@ -749,7 +747,6 @@ static void armsse_realize(DeviceState *dev, Error **errp)
     object_property_set_link(OBJECT(&s->apb_ppc0), "port[1]", OBJECT(mr),
                              &error_abort);
 
-    qdev_prop_set_uint32(DEVICE(&s->dualtimer), "pclk-frq", s->mainclk_frq);
     qdev_connect_clock_in(DEVICE(&s->dualtimer), "TIMCLK", s->mainclk);
     if (!sysbus_realize(SYS_BUS_DEVICE(&s->dualtimer), errp)) {
         return;
@@ -908,7 +905,6 @@ static void armsse_realize(DeviceState *dev, Error **errp)
     /* Devices behind APB PPC1:
      *   0x4002f000: S32K timer
      */
-    qdev_prop_set_uint32(DEVICE(&s->s32ktimer), "pclk-frq", S32KCLK);
     qdev_connect_clock_in(DEVICE(&s->s32ktimer), "pclk", s->s32kclk);
     if (!sysbus_realize(SYS_BUS_DEVICE(&s->s32ktimer), errp)) {
         return;
@@ -1002,7 +998,6 @@ static void armsse_realize(DeviceState *dev, Error **errp)
     qdev_connect_gpio_out(DEVICE(&s->nmi_orgate), 0,
                           qdev_get_gpio_in_named(DEVICE(&s->armv7m), "NMI", 0));
 
-    qdev_prop_set_uint32(DEVICE(&s->s32kwatchdog), "wdogclk-frq", S32KCLK);
     qdev_connect_clock_in(DEVICE(&s->s32kwatchdog), "WDOGCLK", s->s32kclk);
     if (!sysbus_realize(SYS_BUS_DEVICE(&s->s32kwatchdog), errp)) {
         return;
@@ -1013,7 +1008,6 @@ static void armsse_realize(DeviceState *dev, Error **errp)
 
     /* 0x40080000 .. 0x4008ffff : ARMSSE second Base peripheral region */
 
-    qdev_prop_set_uint32(DEVICE(&s->nswatchdog), "wdogclk-frq", s->mainclk_frq);
     qdev_connect_clock_in(DEVICE(&s->nswatchdog), "WDOGCLK", s->mainclk);
     if (!sysbus_realize(SYS_BUS_DEVICE(&s->nswatchdog), errp)) {
         return;
@@ -1022,7 +1016,6 @@ static void armsse_realize(DeviceState *dev, Error **errp)
                        armsse_get_common_irq_in(s, 1));
     sysbus_mmio_map(SYS_BUS_DEVICE(&s->nswatchdog), 0, 0x40081000);
 
-    qdev_prop_set_uint32(DEVICE(&s->swatchdog), "wdogclk-frq", s->mainclk_frq);
     qdev_connect_clock_in(DEVICE(&s->swatchdog), "WDOGCLK", s->mainclk);
     if (!sysbus_realize(SYS_BUS_DEVICE(&s->swatchdog), errp)) {
         return;
diff --git a/hw/arm/mps2-tz.c b/hw/arm/mps2-tz.c
index 7acdf490f28..90caa914934 100644
--- a/hw/arm/mps2-tz.c
+++ b/hw/arm/mps2-tz.c
@@ -413,7 +413,6 @@ static void mps2tz_common_init(MachineState *machine)
     object_property_set_link(OBJECT(&mms->iotkit), "memory",
                              OBJECT(system_memory), &error_abort);
     qdev_prop_set_uint32(iotkitdev, "EXP_NUMIRQ", MPS2TZ_NUMIRQ);
-    qdev_prop_set_uint32(iotkitdev, "MAINCLK_FRQ", SYSCLK_FRQ);
     qdev_connect_clock_in(iotkitdev, "MAINCLK", mms->sysclk);
     qdev_connect_clock_in(iotkitdev, "S32KCLK", mms->s32kclk);
     sysbus_realize(SYS_BUS_DEVICE(&mms->iotkit), &error_fatal);
diff --git a/hw/arm/mps2.c b/hw/arm/mps2.c
index cd1c215f941..39add416db5 100644
--- a/hw/arm/mps2.c
+++ b/hw/arm/mps2.c
@@ -346,7 +346,6 @@ static void mps2_common_init(MachineState *machine)
         object_initialize_child(OBJECT(mms), name, &mms->timer[i],
                                 TYPE_CMSDK_APB_TIMER);
         sbd = SYS_BUS_DEVICE(&mms->timer[i]);
-        qdev_prop_set_uint32(DEVICE(&mms->timer[i]), "pclk-frq", SYSCLK_FRQ);
         qdev_connect_clock_in(DEVICE(&mms->timer[i]), "pclk", mms->sysclk);
         sysbus_realize_and_unref(sbd, &error_fatal);
         sysbus_mmio_map(sbd, 0, base);
@@ -355,7 +354,6 @@ static void mps2_common_init(MachineState *machine)
 
     object_initialize_child(OBJECT(mms), "dualtimer", &mms->dualtimer,
                             TYPE_CMSDK_APB_DUALTIMER);
-    qdev_prop_set_uint32(DEVICE(&mms->dualtimer), "pclk-frq", SYSCLK_FRQ);
     qdev_connect_clock_in(DEVICE(&mms->dualtimer), "TIMCLK", mms->sysclk);
     sysbus_realize(SYS_BUS_DEVICE(&mms->dualtimer), &error_fatal);
     sysbus_connect_irq(SYS_BUS_DEVICE(&mms->dualtimer), 0,
@@ -363,7 +361,6 @@ static void mps2_common_init(MachineState *machine)
     sysbus_mmio_map(SYS_BUS_DEVICE(&mms->dualtimer), 0, 0x40002000);
     object_initialize_child(OBJECT(mms), "watchdog", &mms->watchdog,
                             TYPE_CMSDK_APB_WATCHDOG);
-    qdev_prop_set_uint32(DEVICE(&mms->watchdog), "wdogclk-frq", SYSCLK_FRQ);
     qdev_connect_clock_in(DEVICE(&mms->watchdog), "WDOGCLK", mms->sysclk);
     sysbus_realize(SYS_BUS_DEVICE(&mms->watchdog), &error_fatal);
     sysbus_connect_irq(SYS_BUS_DEVICE(&mms->watchdog), 0,
diff --git a/hw/arm/musca.c b/hw/arm/musca.c
index a9292482a06..945643c3cd7 100644
--- a/hw/arm/musca.c
+++ b/hw/arm/musca.c
@@ -385,7 +385,6 @@ static void musca_init(MachineState *machine)
     qdev_prop_set_uint32(ssedev, "EXP_NUMIRQ", mmc->num_irqs);
     qdev_prop_set_uint32(ssedev, "init-svtor", mmc->init_svtor);
     qdev_prop_set_uint32(ssedev, "SRAM_ADDR_WIDTH", mmc->sram_addr_width);
-    qdev_prop_set_uint32(ssedev, "MAINCLK_FRQ", SYSCLK_FRQ);
     qdev_connect_clock_in(ssedev, "MAINCLK", mms->sysclk);
     qdev_connect_clock_in(ssedev, "S32KCLK", mms->s32kclk);
     /*
diff --git a/hw/arm/stellaris.c b/hw/arm/stellaris.c
index 9b67c739ef2..5acb043a07e 100644
--- a/hw/arm/stellaris.c
+++ b/hw/arm/stellaris.c
@@ -1415,9 +1415,6 @@ static void stellaris_init(MachineState *ms, stellaris_board_info *board)
     if (board->dc1 & (1 << 3)) { /* watchdog present */
         dev = qdev_new(TYPE_LUMINARY_WATCHDOG);
 
-        /* system_clock_scale is valid now */
-        uint32_t mainclk = NANOSECONDS_PER_SECOND / system_clock_scale;
-        qdev_prop_set_uint32(dev, "wdogclk-frq", mainclk);
         qdev_connect_clock_in(dev, "WDOGCLK",
                               qdev_get_clock_out(ssys_dev, "SYSCLK"));
 
-- 
2.20.1

[PATCH v2 24/25] arm: Remove frq properties on CMSDK timer, dualtimer, watchdog, ARMSSE

[Peter Maydell]

Now no users are setting the frq properties on the CMSDK timer,
dualtimer, watchdog or ARMSSE SoC devices, we can remove the
properties and the struct fields that back them.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Luc Michel <luc@lmichel.fr>
Message-id: 20210121190622.22000-25-peter.maydell@linaro.org
---
 include/hw/arm/armsse.h                  | 2 --
 include/hw/timer/cmsdk-apb-dualtimer.h   | 2 --
 include/hw/timer/cmsdk-apb-timer.h       | 2 --
 include/hw/watchdog/cmsdk-apb-watchdog.h | 2 --
 hw/arm/armsse.c                          | 2 --
 hw/timer/cmsdk-apb-dualtimer.c           | 6 ------
 hw/timer/cmsdk-apb-timer.c               | 6 ------
 hw/watchdog/cmsdk-apb-watchdog.c         | 6 ------
 8 files changed, 28 deletions(-)

diff --git a/include/hw/arm/armsse.h b/include/hw/arm/armsse.h
index bfa1e79c4fe..676cd4f36b0 100644
--- a/include/hw/arm/armsse.h
+++ b/include/hw/arm/armsse.h
@@ -41,7 +41,6 @@
  *  + Clock input "S32KCLK": slow 32KHz clock used for a few peripherals
  *  + QOM property "memory" is a MemoryRegion containing the devices provided
  *    by the board model.
- *  + QOM property "MAINCLK_FRQ" is the frequency of the main system clock
  *  + QOM property "EXP_NUMIRQ" sets the number of expansion interrupts.
  *    (In hardware, the SSE-200 permits the number of expansion interrupts
  *    for the two CPUs to be configured separately, but we restrict it to
@@ -218,7 +217,6 @@ struct ARMSSE {
     /* Properties */
     MemoryRegion *board_memory;
     uint32_t exp_numirq;
-    uint32_t mainclk_frq;
     uint32_t sram_addr_width;
     uint32_t init_svtor;
     bool cpu_fpu[SSE_MAX_CPUS];
diff --git a/include/hw/timer/cmsdk-apb-dualtimer.h b/include/hw/timer/cmsdk-apb-dualtimer.h
index 3adbb01dd34..f3ec86c00b5 100644
--- a/include/hw/timer/cmsdk-apb-dualtimer.h
+++ b/include/hw/timer/cmsdk-apb-dualtimer.h
@@ -16,7 +16,6 @@
  * https://developer.arm.com/products/system-design/system-design-kits/cortex-m-system-design-kit
  *
  * QEMU interface:
- *  + QOM property "pclk-frq": frequency at which the timer is clocked
  *  + Clock input "TIMCLK": clock (for both timers)
  *  + sysbus MMIO region 0: the register bank
  *  + sysbus IRQ 0: combined timer interrupt TIMINTC
@@ -63,7 +62,6 @@ struct CMSDKAPBDualTimer {
     /*< public >*/
     MemoryRegion iomem;
     qemu_irq timerintc;
-    uint32_t pclk_frq;
     Clock *timclk;
 
     CMSDKAPBDualTimerModule timermod[CMSDK_APB_DUALTIMER_NUM_MODULES];
diff --git a/include/hw/timer/cmsdk-apb-timer.h b/include/hw/timer/cmsdk-apb-timer.h
index 54f7ec8c502..c4c7eae8499 100644
--- a/include/hw/timer/cmsdk-apb-timer.h
+++ b/include/hw/timer/cmsdk-apb-timer.h
@@ -23,7 +23,6 @@ OBJECT_DECLARE_SIMPLE_TYPE(CMSDKAPBTimer, CMSDK_APB_TIMER)
 
 /*
  * QEMU interface:
- *  + QOM property "pclk-frq": frequency at which the timer is clocked
  *  + Clock input "pclk": clock for the timer
  *  + sysbus MMIO region 0: the register bank
  *  + sysbus IRQ 0: timer interrupt TIMERINT
@@ -35,7 +34,6 @@ struct CMSDKAPBTimer {
     /*< public >*/
     MemoryRegion iomem;
     qemu_irq timerint;
-    uint32_t pclk_frq;
     struct ptimer_state *timer;
     Clock *pclk;
 
diff --git a/include/hw/watchdog/cmsdk-apb-watchdog.h b/include/hw/watchdog/cmsdk-apb-watchdog.h
index 34069ca6969..c6b3e78731e 100644
--- a/include/hw/watchdog/cmsdk-apb-watchdog.h
+++ b/include/hw/watchdog/cmsdk-apb-watchdog.h
@@ -16,7 +16,6 @@
  * https://developer.arm.com/products/system-design/system-design-kits/cortex-m-system-design-kit
  *
  * QEMU interface:
- *  + QOM property "wdogclk-frq": frequency at which the watchdog is clocked
  *  + Clock input "WDOGCLK": clock for the watchdog's timer
  *  + sysbus MMIO region 0: the register bank
  *  + sysbus IRQ 0: watchdog interrupt
@@ -53,7 +52,6 @@ struct CMSDKAPBWatchdog {
     /*< public >*/
     MemoryRegion iomem;
     qemu_irq wdogint;
-    uint32_t wdogclk_frq;
     bool is_luminary;
     struct ptimer_state *timer;
     Clock *wdogclk;
diff --git a/hw/arm/armsse.c b/hw/arm/armsse.c
index 34855e667de..26e1a8c95b6 100644
--- a/hw/arm/armsse.c
+++ b/hw/arm/armsse.c
@@ -48,7 +48,6 @@ static Property iotkit_properties[] = {
     DEFINE_PROP_LINK("memory", ARMSSE, board_memory, TYPE_MEMORY_REGION,
                      MemoryRegion *),
     DEFINE_PROP_UINT32("EXP_NUMIRQ", ARMSSE, exp_numirq, 64),
-    DEFINE_PROP_UINT32("MAINCLK_FRQ", ARMSSE, mainclk_frq, 0),
     DEFINE_PROP_UINT32("SRAM_ADDR_WIDTH", ARMSSE, sram_addr_width, 15),
     DEFINE_PROP_UINT32("init-svtor", ARMSSE, init_svtor, 0x10000000),
     DEFINE_PROP_BOOL("CPU0_FPU", ARMSSE, cpu_fpu[0], true),
@@ -60,7 +59,6 @@ static Property armsse_properties[] = {
     DEFINE_PROP_LINK("memory", ARMSSE, board_memory, TYPE_MEMORY_REGION,
                      MemoryRegion *),
     DEFINE_PROP_UINT32("EXP_NUMIRQ", ARMSSE, exp_numirq, 64),
-    DEFINE_PROP_UINT32("MAINCLK_FRQ", ARMSSE, mainclk_frq, 0),
     DEFINE_PROP_UINT32("SRAM_ADDR_WIDTH", ARMSSE, sram_addr_width, 15),
     DEFINE_PROP_UINT32("init-svtor", ARMSSE, init_svtor, 0x10000000),
     DEFINE_PROP_BOOL("CPU0_FPU", ARMSSE, cpu_fpu[0], false),
diff --git a/hw/timer/cmsdk-apb-dualtimer.c b/hw/timer/cmsdk-apb-dualtimer.c
index 828127b366f..ef49f5852d3 100644
--- a/hw/timer/cmsdk-apb-dualtimer.c
+++ b/hw/timer/cmsdk-apb-dualtimer.c
@@ -533,11 +533,6 @@ static const VMStateDescription cmsdk_apb_dualtimer_vmstate = {
     }
 };
 
-static Property cmsdk_apb_dualtimer_properties[] = {
-    DEFINE_PROP_UINT32("pclk-frq", CMSDKAPBDualTimer, pclk_frq, 0),
-    DEFINE_PROP_END_OF_LIST(),
-};
-
 static void cmsdk_apb_dualtimer_class_init(ObjectClass *klass, void *data)
 {
     DeviceClass *dc = DEVICE_CLASS(klass);
@@ -545,7 +540,6 @@ static void cmsdk_apb_dualtimer_class_init(ObjectClass *klass, void *data)
     dc->realize = cmsdk_apb_dualtimer_realize;
     dc->vmsd = &cmsdk_apb_dualtimer_vmstate;
     dc->reset = cmsdk_apb_dualtimer_reset;
-    device_class_set_props(dc, cmsdk_apb_dualtimer_properties);
 }
 
 static const TypeInfo cmsdk_apb_dualtimer_info = {
diff --git a/hw/timer/cmsdk-apb-timer.c b/hw/timer/cmsdk-apb-timer.c
index f053146d88f..ee51ce3369c 100644
--- a/hw/timer/cmsdk-apb-timer.c
+++ b/hw/timer/cmsdk-apb-timer.c
@@ -261,11 +261,6 @@ static const VMStateDescription cmsdk_apb_timer_vmstate = {
     }
 };
 
-static Property cmsdk_apb_timer_properties[] = {
-    DEFINE_PROP_UINT32("pclk-frq", CMSDKAPBTimer, pclk_frq, 0),
-    DEFINE_PROP_END_OF_LIST(),
-};
-
 static void cmsdk_apb_timer_class_init(ObjectClass *klass, void *data)
 {
     DeviceClass *dc = DEVICE_CLASS(klass);
@@ -273,7 +268,6 @@ static void cmsdk_apb_timer_class_init(ObjectClass *klass, void *data)
     dc->realize = cmsdk_apb_timer_realize;
     dc->vmsd = &cmsdk_apb_timer_vmstate;
     dc->reset = cmsdk_apb_timer_reset;
-    device_class_set_props(dc, cmsdk_apb_timer_properties);
 }
 
 static const TypeInfo cmsdk_apb_timer_info = {
diff --git a/hw/watchdog/cmsdk-apb-watchdog.c b/hw/watchdog/cmsdk-apb-watchdog.c
index 9cad0c67da4..302f1711738 100644
--- a/hw/watchdog/cmsdk-apb-watchdog.c
+++ b/hw/watchdog/cmsdk-apb-watchdog.c
@@ -373,11 +373,6 @@ static const VMStateDescription cmsdk_apb_watchdog_vmstate = {
     }
 };
 
-static Property cmsdk_apb_watchdog_properties[] = {
-    DEFINE_PROP_UINT32("wdogclk-frq", CMSDKAPBWatchdog, wdogclk_frq, 0),
-    DEFINE_PROP_END_OF_LIST(),
-};
-
 static void cmsdk_apb_watchdog_class_init(ObjectClass *klass, void *data)
 {
     DeviceClass *dc = DEVICE_CLASS(klass);
@@ -385,7 +380,6 @@ static void cmsdk_apb_watchdog_class_init(ObjectClass *klass, void *data)
     dc->realize = cmsdk_apb_watchdog_realize;
     dc->vmsd = &cmsdk_apb_watchdog_vmstate;
     dc->reset = cmsdk_apb_watchdog_reset;
-    device_class_set_props(dc, cmsdk_apb_watchdog_properties);
 }
 
 static const TypeInfo cmsdk_apb_watchdog_info = {
-- 
2.20.1

[PATCH v2 25/25] hw/arm/stellaris: Remove board-creation reset of STELLARIS_SYS

[Peter Maydell]

Now that the watchdog device uses its Clock input rather than being
passed the value of system_clock_scale at creation time, we can
remove the hack where we reset the STELLARIS_SYS at board creation
time to force it to set system_clock_scale.  Instead it will be reset
at the usual point in startup and will inform the watchdog of the
clock frequency at that point.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Luc Michel <luc@lmichel.fr>
Message-id: 20210121190622.22000-26-peter.maydell@linaro.org
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
---
 hw/arm/stellaris.c | 10 ----------
 1 file changed, 10 deletions(-)

diff --git a/hw/arm/stellaris.c b/hw/arm/stellaris.c
index 5acb043a07e..ad72c0959f1 100644
--- a/hw/arm/stellaris.c
+++ b/hw/arm/stellaris.c
@@ -780,16 +780,6 @@ static DeviceState *stellaris_sys_init(uint32_t base, qemu_irq irq,
     sysbus_mmio_map(sbd, 0, base);
     sysbus_connect_irq(sbd, 0, irq);
 
-    /*
-     * Normally we should not be resetting devices like this during
-     * board creation. For the moment we need to do so, because
-     * system_clock_scale will only get set when the STELLARIS_SYS
-     * device is reset, and we need its initial value to pass to
-     * the watchdog device. This hack can be removed once the
-     * watchdog has been converted to use a Clock input instead.
-     */
-    device_cold_reset(dev);
-
     return dev;
 }
 
-- 
2.20.1

Re: [PATCH v2 00/25] Convert CMSDK timer, watchdog, dualtimer to Clock framework

[Philippe Mathieu-Daudé]

On 1/28/21 12:41 PM, Peter Maydell wrote:
> This patchset converts the CMSDK timer, watchdog and dualtimer devices
> to use the Clock framework instead of an integer property specifying
> a frequency in Hz. The series is quito a lot of patches but they
> should be mostly small and I hope easy to review.
> 
> The motivation here is the upcoming Arm SSE-300 model: this has a
> new kind of timer device, which I wanted to write in the modern style
> with a Clock input. That meant the ARMSSE container object needed
> to know about Clocks, so converting the existing devices it used
> to Clocks seemed like a good first step.
> 
> The series as a whole is a migration compat break for the machines
> involved: mps2-an385, mps2-an386, mps2-an500, mps2-an511, mps2-an505,
> mps2-an521, musca-a, musca-b1, lm3s811evb, lm3s6965evb.
> 
> v1->v2 changes (all very minor so I have left r-by tags in place):
>  * in test cases, remove set-but-never-used QTestState* variables; gcc
>    warns about these (I did my development with clang, which does not...)
>    (patches 3, 4, 5)
>  * in test cases, consistently phrase clock_step() arguments as calculations
>    based on tick counts and the ns-per-tick value rather than just the final
>    numbers (eg '500 * 40 + 1' instead of '20001') (patches 3, 5)
>  * correct the forward-step amount when looking for periodic timer reload
>    of the dualtimer (patch 5)
>  * actually wire up the ARMSSE MAINCLK callback function (patch 22)
> 
> The only patch still unreviewed is 5 ("tests: Add a simple test of the
> CMSDK APB dual timer").
> 
> thanks
> -- PMM
> 
> Peter Maydell (25):
>   ptimer: Add new ptimer_set_period_from_clock() function
>   clock: Add new clock_has_source() function
>   tests: Add a simple test of the CMSDK APB timer
>   tests: Add a simple test of the CMSDK APB watchdog
>   tests: Add a simple test of the CMSDK APB dual timer
>   hw/timer/cmsdk-apb-timer: Rename CMSDKAPBTIMER struct to CMSDKAPBTimer
>   hw/timer/cmsdk-apb-timer: Add Clock input
>   hw/timer/cmsdk-apb-dualtimer: Add Clock input
>   hw/watchdog/cmsdk-apb-watchdog: Add Clock input
>   hw/arm/armsse: Rename "MAINCLK" property to "MAINCLK_FRQ"
>   hw/arm/armsse: Wire up clocks
>   hw/arm/mps2: Inline CMSDK_APB_TIMER creation
>   hw/arm/mps2: Create and connect SYSCLK Clock
>   hw/arm/mps2-tz: Create and connect ARMSSE Clocks
>   hw/arm/musca: Create and connect ARMSSE Clocks
>   hw/arm/stellaris: Convert SSYS to QOM device
>   hw/arm/stellaris: Create Clock input for watchdog
>   hw/timer/cmsdk-apb-timer: Convert to use Clock input
>   hw/timer/cmsdk-apb-dualtimer: Convert to use Clock input
>   hw/watchdog/cmsdk-apb-watchdog: Convert to use Clock input
>   tests/qtest/cmsdk-apb-watchdog-test: Test clock changes
>   hw/arm/armsse: Use Clock to set system_clock_scale
>   arm: Don't set freq properties on CMSDK timer, dualtimer, watchdog,
>     ARMSSE
>   arm: Remove frq properties on CMSDK timer, dualtimer, watchdog, ARMSSE
>   hw/arm/stellaris: Remove board-creation reset of STELLARIS_SYS

Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org>