From: Lukas Bulwahn <lukas.bulwahn@gmail.com> To: Guenter Roeck <linux@roeck-us.net>, linux-hwmon@vger.kernel.org Cc: Jonathan Corbet <corbet@lwn.net>, Mauro Carvalho Chehab <mchehab+huawei@kernel.org>, linux-doc@vger.kernel.org, kernel-janitors@vger.kernel.org, linux-kernel@vger.kernel.org, Lukas Bulwahn <lukas.bulwahn@gmail.com> Subject: [PATCH for -next] docs: hwmon: rectify table in max16601.rst Date: Sun, 31 Jan 2021 08:54:45 +0100 [thread overview] Message-ID: <20210131075445.21222-1-lukas.bulwahn@gmail.com> (raw) Commit 90b0f71d62df ("hwmon: (pmbus/max16601) Determine and use number of populated phases") adjusts content in the table of ./Documentation/hwmon/max16601.rst, but one row went beyond the column's length. Hence, make htmldocs warns: Documentation/hwmon/max16601.rst:94: WARNING: Malformed table. Adjust the column length of that table for this longer row to fit. Signed-off-by: Lukas Bulwahn <lukas.bulwahn@gmail.com> --- applies cleanly on next-20210129 Guenter, please pick this minor fixup for your hwmon-next tree. Documentation/hwmon/max16601.rst | 143 +++++++++++++++---------------- 1 file changed, 71 insertions(+), 72 deletions(-) diff --git a/Documentation/hwmon/max16601.rst b/Documentation/hwmon/max16601.rst index d16792be7533..d265a2224354 100644 --- a/Documentation/hwmon/max16601.rst +++ b/Documentation/hwmon/max16601.rst @@ -53,75 +53,74 @@ Sysfs entries The following attributes are supported. -======================= ======================================================= -in1_label "vin1" -in1_input VCORE input voltage. -in1_alarm Input voltage alarm. - -in2_label "vout1" -in2_input VCORE output voltage. -in2_alarm Output voltage alarm. - -curr1_label "iin1" -curr1_input VCORE input current, derived from duty cycle and output - current. -curr1_max Maximum input current. -curr1_max_alarm Current high alarm. - -curr[P+2]_label "iin1.P" -curr[P+2]_input VCORE phase P input current. - -curr[N+2]_label "iin2" -curr[N+2]_input VCORE input current, derived from sensor element. - 'N' is the number of enabled/populated phases. - -curr[N+3]_label "iin3" -curr[N+3]_input VSA input current. - -curr[N+4]_label "iout1" -curr[N+4]_input VCORE output current. -curr[N+4]_crit Critical output current. -curr[N+4]_crit_alarm Output current critical alarm. -curr[N+4]_max Maximum output current. -curr[N+4]_max_alarm Output current high alarm. - -curr[N+P+5]_label "iout1.P" -curr[N+P+5]_input VCORE phase P output current. - -curr[2*N+5]_label "iout3" -curr[2*N+5]_input VSA output current. -curr[2*N+5]_highest Historical maximum VSA output current. -curr[2*N+5]_reset_history - Write any value to reset curr21_highest. -curr[2*N+5]_crit Critical output current. -curr[2*N+5]_crit_alarm Output current critical alarm. -curr[2*N+5]_max Maximum output current. -curr[2*N+5]_max_alarm Output current high alarm. - -power1_label "pin1" -power1_input Input power, derived from duty cycle and output current. -power1_alarm Input power alarm. - -power2_label "pin2" -power2_input Input power, derived from input current sensor. - -power3_label "pout" -power3_input Output power. - -temp1_input VCORE temperature. -temp1_crit Critical high temperature. -temp1_crit_alarm Chip temperature critical high alarm. -temp1_max Maximum temperature. -temp1_max_alarm Chip temperature high alarm. - -temp2_input TSENSE_0 temperature -temp3_input TSENSE_1 temperature -temp4_input TSENSE_2 temperature -temp5_input TSENSE_3 temperature - -temp6_input VSA temperature. -temp6_crit Critical high temperature. -temp6_crit_alarm Chip temperature critical high alarm. -temp6_max Maximum temperature. -temp6_max_alarm Chip temperature high alarm. -======================= ======================================================= +========================= ======================================================= +in1_label "vin1" +in1_input VCORE input voltage. +in1_alarm Input voltage alarm. + +in2_label "vout1" +in2_input VCORE output voltage. +in2_alarm Output voltage alarm. + +curr1_label "iin1" +curr1_input VCORE input current, derived from duty cycle and output + current. +curr1_max Maximum input current. +curr1_max_alarm Current high alarm. + +curr[P+2]_label "iin1.P" +curr[P+2]_input VCORE phase P input current. + +curr[N+2]_label "iin2" +curr[N+2]_input VCORE input current, derived from sensor element. + 'N' is the number of enabled/populated phases. + +curr[N+3]_label "iin3" +curr[N+3]_input VSA input current. + +curr[N+4]_label "iout1" +curr[N+4]_input VCORE output current. +curr[N+4]_crit Critical output current. +curr[N+4]_crit_alarm Output current critical alarm. +curr[N+4]_max Maximum output current. +curr[N+4]_max_alarm Output current high alarm. + +curr[N+P+5]_label "iout1.P" +curr[N+P+5]_input VCORE phase P output current. + +curr[2*N+5]_label "iout3" +curr[2*N+5]_input VSA output current. +curr[2*N+5]_highest Historical maximum VSA output current. +curr[2*N+5]_reset_history Write any value to reset curr21_highest. +curr[2*N+5]_crit Critical output current. +curr[2*N+5]_crit_alarm Output current critical alarm. +curr[2*N+5]_max Maximum output current. +curr[2*N+5]_max_alarm Output current high alarm. + +power1_label "pin1" +power1_input Input power, derived from duty cycle and output current. +power1_alarm Input power alarm. + +power2_label "pin2" +power2_input Input power, derived from input current sensor. + +power3_label "pout" +power3_input Output power. + +temp1_input VCORE temperature. +temp1_crit Critical high temperature. +temp1_crit_alarm Chip temperature critical high alarm. +temp1_max Maximum temperature. +temp1_max_alarm Chip temperature high alarm. + +temp2_input TSENSE_0 temperature +temp3_input TSENSE_1 temperature +temp4_input TSENSE_2 temperature +temp5_input TSENSE_3 temperature + +temp6_input VSA temperature. +temp6_crit Critical high temperature. +temp6_crit_alarm Chip temperature critical high alarm. +temp6_max Maximum temperature. +temp6_max_alarm Chip temperature high alarm. +========================= ======================================================= -- 2.17.1
WARNING: multiple messages have this Message-ID (diff)
From: Lukas Bulwahn <lukas.bulwahn@gmail.com> To: Guenter Roeck <linux@roeck-us.net>, linux-hwmon@vger.kernel.org Cc: Jonathan Corbet <corbet@lwn.net>, Mauro Carvalho Chehab <mchehab+huawei@kernel.org>, linux-doc@vger.kernel.org, kernel-janitors@vger.kernel.org, linux-kernel@vger.kernel.org, Lukas Bulwahn <lukas.bulwahn@gmail.com> Subject: [PATCH for -next] docs: hwmon: rectify table in max16601.rst Date: Sun, 31 Jan 2021 07:54:45 +0000 [thread overview] Message-ID: <20210131075445.21222-1-lukas.bulwahn@gmail.com> (raw) Commit 90b0f71d62df ("hwmon: (pmbus/max16601) Determine and use number of populated phases") adjusts content in the table of ./Documentation/hwmon/max16601.rst, but one row went beyond the column's length. Hence, make htmldocs warns: Documentation/hwmon/max16601.rst:94: WARNING: Malformed table. Adjust the column length of that table for this longer row to fit. Signed-off-by: Lukas Bulwahn <lukas.bulwahn@gmail.com> --- applies cleanly on next-20210129 Guenter, please pick this minor fixup for your hwmon-next tree. Documentation/hwmon/max16601.rst | 143 +++++++++++++++---------------- 1 file changed, 71 insertions(+), 72 deletions(-) diff --git a/Documentation/hwmon/max16601.rst b/Documentation/hwmon/max16601.rst index d16792be7533..d265a2224354 100644 --- a/Documentation/hwmon/max16601.rst +++ b/Documentation/hwmon/max16601.rst @@ -53,75 +53,74 @@ Sysfs entries The following attributes are supported. -============ ===========================-in1_label "vin1" -in1_input VCORE input voltage. -in1_alarm Input voltage alarm. - -in2_label "vout1" -in2_input VCORE output voltage. -in2_alarm Output voltage alarm. - -curr1_label "iin1" -curr1_input VCORE input current, derived from duty cycle and output - current. -curr1_max Maximum input current. -curr1_max_alarm Current high alarm. - -curr[P+2]_label "iin1.P" -curr[P+2]_input VCORE phase P input current. - -curr[N+2]_label "iin2" -curr[N+2]_input VCORE input current, derived from sensor element. - 'N' is the number of enabled/populated phases. - -curr[N+3]_label "iin3" -curr[N+3]_input VSA input current. - -curr[N+4]_label "iout1" -curr[N+4]_input VCORE output current. -curr[N+4]_crit Critical output current. -curr[N+4]_crit_alarm Output current critical alarm. -curr[N+4]_max Maximum output current. -curr[N+4]_max_alarm Output current high alarm. - -curr[N+P+5]_label "iout1.P" -curr[N+P+5]_input VCORE phase P output current. - -curr[2*N+5]_label "iout3" -curr[2*N+5]_input VSA output current. -curr[2*N+5]_highest Historical maximum VSA output current. -curr[2*N+5]_reset_history - Write any value to reset curr21_highest. -curr[2*N+5]_crit Critical output current. -curr[2*N+5]_crit_alarm Output current critical alarm. -curr[2*N+5]_max Maximum output current. -curr[2*N+5]_max_alarm Output current high alarm. - -power1_label "pin1" -power1_input Input power, derived from duty cycle and output current. -power1_alarm Input power alarm. - -power2_label "pin2" -power2_input Input power, derived from input current sensor. - -power3_label "pout" -power3_input Output power. - -temp1_input VCORE temperature. -temp1_crit Critical high temperature. -temp1_crit_alarm Chip temperature critical high alarm. -temp1_max Maximum temperature. -temp1_max_alarm Chip temperature high alarm. - -temp2_input TSENSE_0 temperature -temp3_input TSENSE_1 temperature -temp4_input TSENSE_2 temperature -temp5_input TSENSE_3 temperature - -temp6_input VSA temperature. -temp6_crit Critical high temperature. -temp6_crit_alarm Chip temperature critical high alarm. -temp6_max Maximum temperature. -temp6_max_alarm Chip temperature high alarm. -============ ===========================+============= ===========================+in1_label "vin1" +in1_input VCORE input voltage. +in1_alarm Input voltage alarm. + +in2_label "vout1" +in2_input VCORE output voltage. +in2_alarm Output voltage alarm. + +curr1_label "iin1" +curr1_input VCORE input current, derived from duty cycle and output + current. +curr1_max Maximum input current. +curr1_max_alarm Current high alarm. + +curr[P+2]_label "iin1.P" +curr[P+2]_input VCORE phase P input current. + +curr[N+2]_label "iin2" +curr[N+2]_input VCORE input current, derived from sensor element. + 'N' is the number of enabled/populated phases. + +curr[N+3]_label "iin3" +curr[N+3]_input VSA input current. + +curr[N+4]_label "iout1" +curr[N+4]_input VCORE output current. +curr[N+4]_crit Critical output current. +curr[N+4]_crit_alarm Output current critical alarm. +curr[N+4]_max Maximum output current. +curr[N+4]_max_alarm Output current high alarm. + +curr[N+P+5]_label "iout1.P" +curr[N+P+5]_input VCORE phase P output current. + +curr[2*N+5]_label "iout3" +curr[2*N+5]_input VSA output current. +curr[2*N+5]_highest Historical maximum VSA output current. +curr[2*N+5]_reset_history Write any value to reset curr21_highest. +curr[2*N+5]_crit Critical output current. +curr[2*N+5]_crit_alarm Output current critical alarm. +curr[2*N+5]_max Maximum output current. +curr[2*N+5]_max_alarm Output current high alarm. + +power1_label "pin1" +power1_input Input power, derived from duty cycle and output current. +power1_alarm Input power alarm. + +power2_label "pin2" +power2_input Input power, derived from input current sensor. + +power3_label "pout" +power3_input Output power. + +temp1_input VCORE temperature. +temp1_crit Critical high temperature. +temp1_crit_alarm Chip temperature critical high alarm. +temp1_max Maximum temperature. +temp1_max_alarm Chip temperature high alarm. + +temp2_input TSENSE_0 temperature +temp3_input TSENSE_1 temperature +temp4_input TSENSE_2 temperature +temp5_input TSENSE_3 temperature + +temp6_input VSA temperature. +temp6_crit Critical high temperature. +temp6_crit_alarm Chip temperature critical high alarm. +temp6_max Maximum temperature. +temp6_max_alarm Chip temperature high alarm. +============= ===========================-- 2.17.1
next reply other threads:[~2021-01-31 7:56 UTC|newest] Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top 2021-01-31 7:54 Lukas Bulwahn [this message] 2021-01-31 7:54 ` [PATCH for -next] docs: hwmon: rectify table in max16601.rst Lukas Bulwahn 2021-02-01 0:33 ` Guenter Roeck 2021-02-01 0:33 ` Guenter Roeck
Reply instructions: You may reply publicly to this message via plain-text email using any one of the following methods: * Save the following mbox file, import it into your mail client, and reply-to-all from there: mbox Avoid top-posting and favor interleaved quoting: https://en.wikipedia.org/wiki/Posting_style#Interleaved_style * Reply using the --to, --cc, and --in-reply-to switches of git-send-email(1): git send-email \ --in-reply-to=20210131075445.21222-1-lukas.bulwahn@gmail.com \ --to=lukas.bulwahn@gmail.com \ --cc=corbet@lwn.net \ --cc=kernel-janitors@vger.kernel.org \ --cc=linux-doc@vger.kernel.org \ --cc=linux-hwmon@vger.kernel.org \ --cc=linux-kernel@vger.kernel.org \ --cc=linux@roeck-us.net \ --cc=mchehab+huawei@kernel.org \ /path/to/YOUR_REPLY https://kernel.org/pub/software/scm/git/docs/git-send-email.html * If your mail client supports setting the In-Reply-To header via mailto: links, try the mailto: linkBe sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.