* [GIT PULL 1/6] i.MX drivers change for 5.12
@ 2021-02-04 12:01 ` Shawn Guo
0 siblings, 0 replies; 24+ messages in thread
From: Shawn Guo @ 2021-02-04 12:01 UTC (permalink / raw)
To: soc, arm
Cc: Shawn Guo, Stefan Agner, Li Yang, linux-imx, kernel,
Fabio Estevam, linux-arm-kernel
The following changes since commit 5c8fe583cce542aa0b84adc939ce85293de36e5e:
Linux 5.11-rc1 (2020-12-27 15:30:22 -0800)
are available in the Git repository at:
git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux.git tags/imx-drivers-5.12
for you to fetch changes up to 7d981405d0fd3cfc0de052e4791f516235d8b858:
soc: imx8m: change to use platform driver (2021-01-11 10:46:09 +0800)
----------------------------------------------------------------
i.MX drivers change for 5.12:
- Change soc-imx8m to use platform driver, so that defer probe can be
used to resolve dependency on OCOTP clock.
----------------------------------------------------------------
Alice Guo (1):
soc: imx8m: change to use platform driver
drivers/soc/imx/soc-imx8m.c | 84 ++++++++++++++++++++++++++++++++++++++-------
1 file changed, 72 insertions(+), 12 deletions(-)
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply [flat|nested] 24+ messages in thread* [GIT PULL 2/6] i.MX SoC update for 5.12
@ 2021-02-04 12:01 ` Shawn Guo
0 siblings, 0 replies; 24+ messages in thread
From: Shawn Guo @ 2021-02-04 12:01 UTC (permalink / raw)
To: soc, arm
Cc: Shawn Guo, Fabio Estevam, Stefan Agner, Li Yang, kernel,
linux-imx, linux-arm-kernel
The following changes since commit 5c8fe583cce542aa0b84adc939ce85293de36e5e:
Linux 5.11-rc1 (2020-12-27 15:30:22 -0800)
are available in the Git repository at:
git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux.git tags/imx-soc-5.12
for you to fetch changes up to 579c6f925e5ae3a70ec32e936908066707dbfef5:
ARM: imx: Remove unused IMX_GPIO_NR() macro (2021-01-29 16:47:25 +0800)
----------------------------------------------------------------
i.MX SoC update for 5.12:
- Drop unused IMX_GPIO_NR() macro.
- Remove KSZ8081 PHY fixup from i.MX6UL machine code, because it only
applies for KSZ8081RNA with 50MHz clock source, but breaks other
KSZ8081 PHY configurations.
- Add a print of CPU type and SOC revision for i.MX6UL during boot.
----------------------------------------------------------------
Fabio Estevam (1):
ARM: imx: Remove unused IMX_GPIO_NR() macro
Oleksij Rempel (1):
ARM: imx: mach-imx6ul: remove 14x14 EVK specific PHY fixup
Stefan Riedmueller (1):
ARM: mach-imx: imx6ul: Print SOC revision on boot
arch/arm/mach-imx/hardware.h | 4 ----
arch/arm/mach-imx/mach-imx6ul.c | 25 ++++---------------------
2 files changed, 4 insertions(+), 25 deletions(-)
^ permalink raw reply [flat|nested] 24+ messages in thread* [GIT PULL 2/6] i.MX SoC update for 5.12
@ 2021-02-04 12:01 ` Shawn Guo
0 siblings, 0 replies; 24+ messages in thread
From: Shawn Guo @ 2021-02-04 12:01 UTC (permalink / raw)
To: soc, arm
Cc: Shawn Guo, Stefan Agner, Li Yang, linux-imx, kernel,
Fabio Estevam, linux-arm-kernel
The following changes since commit 5c8fe583cce542aa0b84adc939ce85293de36e5e:
Linux 5.11-rc1 (2020-12-27 15:30:22 -0800)
are available in the Git repository at:
git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux.git tags/imx-soc-5.12
for you to fetch changes up to 579c6f925e5ae3a70ec32e936908066707dbfef5:
ARM: imx: Remove unused IMX_GPIO_NR() macro (2021-01-29 16:47:25 +0800)
----------------------------------------------------------------
i.MX SoC update for 5.12:
- Drop unused IMX_GPIO_NR() macro.
- Remove KSZ8081 PHY fixup from i.MX6UL machine code, because it only
applies for KSZ8081RNA with 50MHz clock source, but breaks other
KSZ8081 PHY configurations.
- Add a print of CPU type and SOC revision for i.MX6UL during boot.
----------------------------------------------------------------
Fabio Estevam (1):
ARM: imx: Remove unused IMX_GPIO_NR() macro
Oleksij Rempel (1):
ARM: imx: mach-imx6ul: remove 14x14 EVK specific PHY fixup
Stefan Riedmueller (1):
ARM: mach-imx: imx6ul: Print SOC revision on boot
arch/arm/mach-imx/hardware.h | 4 ----
arch/arm/mach-imx/mach-imx6ul.c | 25 ++++---------------------
2 files changed, 4 insertions(+), 25 deletions(-)
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply [flat|nested] 24+ messages in thread* Re: [GIT PULL 2/6] i.MX SoC update for 5.12
@ 2021-02-09 23:10 ` Arnd Bergmann
0 siblings, 0 replies; 24+ messages in thread
From: Arnd Bergmann @ 2021-02-09 23:10 UTC (permalink / raw)
To: arm, soc, Shawn Guo
Cc: Arnd Bergmann, Li Yang, Stefan Agner, linux-arm-kernel,
Fabio Estevam, kernel, linux-imx
From: Arnd Bergmann <arnd@arndb.de>
On Thu, 4 Feb 2021 20:01:46 +0800, Shawn Guo wrote:
> The following changes since commit 5c8fe583cce542aa0b84adc939ce85293de36e5e:
>
> Linux 5.11-rc1 (2020-12-27 15:30:22 -0800)
>
> are available in the Git repository at:
>
> git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux.git tags/imx-soc-5.12
>
> [...]
Merged into arm/soc, thanks!
merge commit: 82e754b1ba6502bc627c2fdf04c3bc6383aefbec
Arnd
^ permalink raw reply [flat|nested] 24+ messages in thread* Re: [GIT PULL 2/6] i.MX SoC update for 5.12
@ 2021-02-09 23:10 ` Arnd Bergmann
0 siblings, 0 replies; 24+ messages in thread
From: Arnd Bergmann @ 2021-02-09 23:10 UTC (permalink / raw)
To: arm, soc, Shawn Guo
Cc: Arnd Bergmann, Stefan Agner, Li Yang, linux-imx, kernel,
Fabio Estevam, linux-arm-kernel
From: Arnd Bergmann <arnd@arndb.de>
On Thu, 4 Feb 2021 20:01:46 +0800, Shawn Guo wrote:
> The following changes since commit 5c8fe583cce542aa0b84adc939ce85293de36e5e:
>
> Linux 5.11-rc1 (2020-12-27 15:30:22 -0800)
>
> are available in the Git repository at:
>
> git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux.git tags/imx-soc-5.12
>
> [...]
Merged into arm/soc, thanks!
merge commit: 82e754b1ba6502bc627c2fdf04c3bc6383aefbec
Arnd
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply [flat|nested] 24+ messages in thread
* [GIT PULL 3/6] i.MX DT bindings update for 5.12
@ 2021-02-04 12:01 ` Shawn Guo
0 siblings, 0 replies; 24+ messages in thread
From: Shawn Guo @ 2021-02-04 12:01 UTC (permalink / raw)
To: soc, arm
Cc: Shawn Guo, Fabio Estevam, Stefan Agner, Li Yang, kernel,
linux-imx, linux-arm-kernel
The following changes since commit 5c8fe583cce542aa0b84adc939ce85293de36e5e:
Linux 5.11-rc1 (2020-12-27 15:30:22 -0800)
are available in the Git repository at:
git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux.git tags/imx-bindings-5.12
for you to fetch changes up to 1447e43c0b735ffc0d48a6aec4f74d6877caffc2:
dt-bindings: arm: imx: add imx8mm nitrogen support (2021-01-30 22:25:55 +0800)
----------------------------------------------------------------
i.MX DT bindings update for 5.12:
- Various board compatible additions to fsl.yaml.
- Add vendor prefix for Plymovent and Kverneland Group.
- Update simple panel bindings to include compatible for EDT and Kyocera
panels.
----------------------------------------------------------------
Adam Ford (1):
dt-bindings: arm: fsl: Add beacon,imx8mn-beacon-kit
Adrien Grassein (1):
dt-bindings: arm: imx: add imx8mm nitrogen support
Alice Guo (1):
dt-bindings: soc: imx8m: add DT Binding doc for soc unique ID
Martin Kepplinger (1):
dt-bindings: arm: fsl: Add the librem 5 Evergreen revision
Michael Walle (1):
dt-bindings: arm: fsl: add Kontron sl28 variant 1
Oleksij Rempel (11):
dt-bindings: display: simple: fix alphabetical order for EDT compatibles
dt-bindings: display: simple: add EDT compatibles already supported by the driver
dt-bindings: display: simple: Add Kyocera tcg070wvlq panel
dt-bindings: vendor-prefixes: Add an entry for Plymovent
dt-bindings: arm: fsl: add Plymovent M2M board
dt-bindings: arm: fsl: add Plymovent BAS board
dt-bindings: arm: fsl: add Protonic MVT board
dt-bindings: arm: fsl: add Protonic PRTI6G board
dt-bindings: vendor-prefixes: Add an entry for Kverneland Group
dt-bindings: arm: fsl: add Kverneland UT1, UT1Q and UI1P boards
dt-bindings: arm: fsl: add Kverneland TGO board
Teresa Remmet (1):
bindings: arm: fsl: Add PHYTEC i.MX8MP devicetree bindings
Tim Harvey (1):
dt-bindings: arm: fsl: Add binding for Gateworks boards with IMX8MM
Documentation/devicetree/bindings/arm/fsl.yaml | 23 ++++++
.../bindings/display/panel/panel-simple.yaml | 19 +++--
.../devicetree/bindings/soc/imx/imx8m-soc.yaml | 86 ++++++++++++++++++++++
.../devicetree/bindings/vendor-prefixes.yaml | 4 +
4 files changed, 124 insertions(+), 8 deletions(-)
create mode 100644 Documentation/devicetree/bindings/soc/imx/imx8m-soc.yaml
^ permalink raw reply [flat|nested] 24+ messages in thread* [GIT PULL 3/6] i.MX DT bindings update for 5.12
@ 2021-02-04 12:01 ` Shawn Guo
0 siblings, 0 replies; 24+ messages in thread
From: Shawn Guo @ 2021-02-04 12:01 UTC (permalink / raw)
To: soc, arm
Cc: Shawn Guo, Stefan Agner, Li Yang, linux-imx, kernel,
Fabio Estevam, linux-arm-kernel
The following changes since commit 5c8fe583cce542aa0b84adc939ce85293de36e5e:
Linux 5.11-rc1 (2020-12-27 15:30:22 -0800)
are available in the Git repository at:
git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux.git tags/imx-bindings-5.12
for you to fetch changes up to 1447e43c0b735ffc0d48a6aec4f74d6877caffc2:
dt-bindings: arm: imx: add imx8mm nitrogen support (2021-01-30 22:25:55 +0800)
----------------------------------------------------------------
i.MX DT bindings update for 5.12:
- Various board compatible additions to fsl.yaml.
- Add vendor prefix for Plymovent and Kverneland Group.
- Update simple panel bindings to include compatible for EDT and Kyocera
panels.
----------------------------------------------------------------
Adam Ford (1):
dt-bindings: arm: fsl: Add beacon,imx8mn-beacon-kit
Adrien Grassein (1):
dt-bindings: arm: imx: add imx8mm nitrogen support
Alice Guo (1):
dt-bindings: soc: imx8m: add DT Binding doc for soc unique ID
Martin Kepplinger (1):
dt-bindings: arm: fsl: Add the librem 5 Evergreen revision
Michael Walle (1):
dt-bindings: arm: fsl: add Kontron sl28 variant 1
Oleksij Rempel (11):
dt-bindings: display: simple: fix alphabetical order for EDT compatibles
dt-bindings: display: simple: add EDT compatibles already supported by the driver
dt-bindings: display: simple: Add Kyocera tcg070wvlq panel
dt-bindings: vendor-prefixes: Add an entry for Plymovent
dt-bindings: arm: fsl: add Plymovent M2M board
dt-bindings: arm: fsl: add Plymovent BAS board
dt-bindings: arm: fsl: add Protonic MVT board
dt-bindings: arm: fsl: add Protonic PRTI6G board
dt-bindings: vendor-prefixes: Add an entry for Kverneland Group
dt-bindings: arm: fsl: add Kverneland UT1, UT1Q and UI1P boards
dt-bindings: arm: fsl: add Kverneland TGO board
Teresa Remmet (1):
bindings: arm: fsl: Add PHYTEC i.MX8MP devicetree bindings
Tim Harvey (1):
dt-bindings: arm: fsl: Add binding for Gateworks boards with IMX8MM
Documentation/devicetree/bindings/arm/fsl.yaml | 23 ++++++
.../bindings/display/panel/panel-simple.yaml | 19 +++--
.../devicetree/bindings/soc/imx/imx8m-soc.yaml | 86 ++++++++++++++++++++++
.../devicetree/bindings/vendor-prefixes.yaml | 4 +
4 files changed, 124 insertions(+), 8 deletions(-)
create mode 100644 Documentation/devicetree/bindings/soc/imx/imx8m-soc.yaml
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply [flat|nested] 24+ messages in thread* Re: [GIT PULL 3/6] i.MX DT bindings update for 5.12
@ 2021-02-09 23:06 ` Arnd Bergmann
0 siblings, 0 replies; 24+ messages in thread
From: Arnd Bergmann @ 2021-02-09 23:06 UTC (permalink / raw)
To: soc, arm, Shawn Guo
Cc: Arnd Bergmann, Stefan Agner, linux-imx, Li Yang, Fabio Estevam,
kernel, linux-arm-kernel
From: Arnd Bergmann <arnd@arndb.de>
On Thu, 4 Feb 2021 20:01:47 +0800, Shawn Guo wrote:
> The following changes since commit 5c8fe583cce542aa0b84adc939ce85293de36e5e:
>
> Linux 5.11-rc1 (2020-12-27 15:30:22 -0800)
>
> are available in the Git repository at:
>
> git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux.git tags/imx-bindings-5.12
>
> [...]
Merged into arm/dt, thanks!
merge commit: 6f771ce6c3bb2c4dc9d348b578871c7adb8b285b
Arnd
^ permalink raw reply [flat|nested] 24+ messages in thread* Re: [GIT PULL 3/6] i.MX DT bindings update for 5.12
@ 2021-02-09 23:06 ` Arnd Bergmann
0 siblings, 0 replies; 24+ messages in thread
From: Arnd Bergmann @ 2021-02-09 23:06 UTC (permalink / raw)
To: soc, arm, Shawn Guo
Cc: Arnd Bergmann, Stefan Agner, Li Yang, linux-imx, kernel,
Fabio Estevam, linux-arm-kernel
From: Arnd Bergmann <arnd@arndb.de>
On Thu, 4 Feb 2021 20:01:47 +0800, Shawn Guo wrote:
> The following changes since commit 5c8fe583cce542aa0b84adc939ce85293de36e5e:
>
> Linux 5.11-rc1 (2020-12-27 15:30:22 -0800)
>
> are available in the Git repository at:
>
> git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux.git tags/imx-bindings-5.12
>
> [...]
Merged into arm/dt, thanks!
merge commit: 6f771ce6c3bb2c4dc9d348b578871c7adb8b285b
Arnd
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply [flat|nested] 24+ messages in thread
* [GIT PULL 4/6] i.MX device tree change for 5.12
@ 2021-02-04 12:01 ` Shawn Guo
0 siblings, 0 replies; 24+ messages in thread
From: Shawn Guo @ 2021-02-04 12:01 UTC (permalink / raw)
To: soc, arm
Cc: Shawn Guo, Fabio Estevam, Stefan Agner, Li Yang, kernel,
linux-imx, linux-arm-kernel
Hi,
Tag imx-fixes-5.11-2 is merged into the branch to resolve some
dependency around imx6-sr-som board support.
Shawn
The following changes since commit 82c082784e03a9a9c043345f9bc04bc8254cf6da:
firmware: imx: select SOC_BUS to fix firmware build (2021-01-18 15:49:07 +0800)
are available in the Git repository at:
git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux.git tags/imx-dt-5.12
for you to fetch changes up to 498f8aee6ec000392d918ecbcbeb1b5ee3132006:
ARM: dts: imx6: RDU2: adjust audio devices nomenclature (2021-01-30 21:52:31 +0800)
----------------------------------------------------------------
i.MX device tree change for 5.12:
- A series from Oleksij Rempel to add i.MX6 based Plymovent, Protonic
and Kverneland boards.
- A series from Andreas Kemnade to improve UART support for ebook
readers.
- A series from Fabio Estevam to update imx6ul-14x14-evk device tree for
adding GPIO expander and camera support.
- A patch set from Lucas Stach to improve ZII RDU2 support, enabling
WDOG, tuning I2C drive-strength, RMI4 and UCS1002 ALERT.
- Other small and random updates on various boards.
----------------------------------------------------------------
Adam Ford (1):
ARM: dts: imx6q-logicpd: Drop unused clock-names reference
Andreas Kemnade (4):
ARM: dts: imx6sl-tolino-shine2hd: correct console uart pinmux
ARM: dts: imx6sl-tolino-shine2hd: add second uart
ARM: dts: imx6sl-tolino-shine3: correct console uart pinmux
ARM: dts: imx: e60k02: add second uart
Cory Tusar (1):
ARM: dts: imx6: RDU2: adjust audio devices nomenclature
Fabio Estevam (4):
ARM: dts: imx6ul-14x14-evk: Fix SPI chipselect polarity
ARM: dts: imx6ul-14x14-evk: Enable the GPIO expander
ARM: dts: imx6ul-14x14-evk: Describe the KSZ8081 reset
ARM: dts: imx6ul-14x14-evk: Add camera support
Joakim Zhang (1):
ARM: dts: imx6: add wakeup support via magic packet
Laurent Pinchart (1):
ARM: dts: imx6q(dl): Move 'port' nodes under 'ports' for HDMI encoder
Lucas Stach (3):
ARM: dts: imx6: RDU2: reduce i2c drive-strength
ARM: dts: imx6: RDU2: enable RMI4 reduced reporting
ARM: dts: imx6: RDU2: only trigger IRQ on falling edge ucs1002 ALERT pin
Mans Rullgard (1):
ARM: dts: imx28: add pinmux for USB1 overcurrent on pwm2
Marek Vasut (1):
ARM: dts: imx7: Mark timer with arm,cpu-registers-not-fw-configured
Oleksij Rempel (6):
ARM: dts: add Plymovent M2M board
ARM: dts: add Plymovent BAS board
ARM: dts: add Protonic MVT board
ARM: dts: add Protonic PRTI6G board
ARM: dts: add Kverneland UT1, UT1Q and UT1P
ARM: dts: add Kverneland TGO board
Philipp Zabel (1):
ARM: dts: imx6: rdu2: enable WDOG1
Russell King (1):
ARM: dts: imx6-sr-som: increase at8035 PHY gigabit Tw parameter
Shawn Guo (1):
Merge tag 'imx-fixes-5.11-2' into imx/dt
arch/arm/boot/dts/Makefile | 8 +
arch/arm/boot/dts/e60k02.dtsi | 6 +
arch/arm/boot/dts/imx28.dtsi | 10 +
arch/arm/boot/dts/imx6-logicpd-baseboard.dtsi | 1 -
arch/arm/boot/dts/imx6dl-plybas.dts | 394 ++++++++++++
arch/arm/boot/dts/imx6dl-plym2m.dts | 446 ++++++++++++++
arch/arm/boot/dts/imx6dl-prtmvt.dts | 852 ++++++++++++++++++++++++++
arch/arm/boot/dts/imx6dl-victgo.dts | 852 ++++++++++++++++++++++++++
arch/arm/boot/dts/imx6dl-vicut1.dts | 13 +
arch/arm/boot/dts/imx6q-vicut1.dts | 17 +
arch/arm/boot/dts/imx6q.dtsi | 20 +-
arch/arm/boot/dts/imx6qdl-sabreauto.dtsi | 1 +
arch/arm/boot/dts/imx6qdl-sr-som.dtsi | 2 +
arch/arm/boot/dts/imx6qdl-vicut1.dtsi | 803 ++++++++++++++++++++++++
arch/arm/boot/dts/imx6qdl-zii-rdu2.dtsi | 42 +-
arch/arm/boot/dts/imx6qdl.dtsi | 25 +-
arch/arm/boot/dts/imx6qp-vicutp.dts | 13 +
arch/arm/boot/dts/imx6sl-tolino-shine2hd.dts | 18 +-
arch/arm/boot/dts/imx6sl-tolino-shine3.dts | 15 +-
arch/arm/boot/dts/imx6sll-kobo-clarahd.dts | 13 +-
arch/arm/boot/dts/imx6sx-sdb.dtsi | 2 +
arch/arm/boot/dts/imx6ul-14x14-evk.dtsi | 54 +-
arch/arm/boot/dts/imx6ul-prti6g.dts | 356 +++++++++++
arch/arm/boot/dts/imx6ul.dtsi | 2 +
arch/arm/boot/dts/imx7s.dtsi | 1 +
25 files changed, 3917 insertions(+), 49 deletions(-)
create mode 100644 arch/arm/boot/dts/imx6dl-plybas.dts
create mode 100644 arch/arm/boot/dts/imx6dl-plym2m.dts
create mode 100644 arch/arm/boot/dts/imx6dl-prtmvt.dts
create mode 100644 arch/arm/boot/dts/imx6dl-victgo.dts
create mode 100644 arch/arm/boot/dts/imx6dl-vicut1.dts
create mode 100644 arch/arm/boot/dts/imx6q-vicut1.dts
create mode 100644 arch/arm/boot/dts/imx6qdl-vicut1.dtsi
create mode 100644 arch/arm/boot/dts/imx6qp-vicutp.dts
create mode 100644 arch/arm/boot/dts/imx6ul-prti6g.dts
^ permalink raw reply [flat|nested] 24+ messages in thread* [GIT PULL 4/6] i.MX device tree change for 5.12
@ 2021-02-04 12:01 ` Shawn Guo
0 siblings, 0 replies; 24+ messages in thread
From: Shawn Guo @ 2021-02-04 12:01 UTC (permalink / raw)
To: soc, arm
Cc: Shawn Guo, Stefan Agner, Li Yang, linux-imx, kernel,
Fabio Estevam, linux-arm-kernel
Hi,
Tag imx-fixes-5.11-2 is merged into the branch to resolve some
dependency around imx6-sr-som board support.
Shawn
The following changes since commit 82c082784e03a9a9c043345f9bc04bc8254cf6da:
firmware: imx: select SOC_BUS to fix firmware build (2021-01-18 15:49:07 +0800)
are available in the Git repository at:
git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux.git tags/imx-dt-5.12
for you to fetch changes up to 498f8aee6ec000392d918ecbcbeb1b5ee3132006:
ARM: dts: imx6: RDU2: adjust audio devices nomenclature (2021-01-30 21:52:31 +0800)
----------------------------------------------------------------
i.MX device tree change for 5.12:
- A series from Oleksij Rempel to add i.MX6 based Plymovent, Protonic
and Kverneland boards.
- A series from Andreas Kemnade to improve UART support for ebook
readers.
- A series from Fabio Estevam to update imx6ul-14x14-evk device tree for
adding GPIO expander and camera support.
- A patch set from Lucas Stach to improve ZII RDU2 support, enabling
WDOG, tuning I2C drive-strength, RMI4 and UCS1002 ALERT.
- Other small and random updates on various boards.
----------------------------------------------------------------
Adam Ford (1):
ARM: dts: imx6q-logicpd: Drop unused clock-names reference
Andreas Kemnade (4):
ARM: dts: imx6sl-tolino-shine2hd: correct console uart pinmux
ARM: dts: imx6sl-tolino-shine2hd: add second uart
ARM: dts: imx6sl-tolino-shine3: correct console uart pinmux
ARM: dts: imx: e60k02: add second uart
Cory Tusar (1):
ARM: dts: imx6: RDU2: adjust audio devices nomenclature
Fabio Estevam (4):
ARM: dts: imx6ul-14x14-evk: Fix SPI chipselect polarity
ARM: dts: imx6ul-14x14-evk: Enable the GPIO expander
ARM: dts: imx6ul-14x14-evk: Describe the KSZ8081 reset
ARM: dts: imx6ul-14x14-evk: Add camera support
Joakim Zhang (1):
ARM: dts: imx6: add wakeup support via magic packet
Laurent Pinchart (1):
ARM: dts: imx6q(dl): Move 'port' nodes under 'ports' for HDMI encoder
Lucas Stach (3):
ARM: dts: imx6: RDU2: reduce i2c drive-strength
ARM: dts: imx6: RDU2: enable RMI4 reduced reporting
ARM: dts: imx6: RDU2: only trigger IRQ on falling edge ucs1002 ALERT pin
Mans Rullgard (1):
ARM: dts: imx28: add pinmux for USB1 overcurrent on pwm2
Marek Vasut (1):
ARM: dts: imx7: Mark timer with arm,cpu-registers-not-fw-configured
Oleksij Rempel (6):
ARM: dts: add Plymovent M2M board
ARM: dts: add Plymovent BAS board
ARM: dts: add Protonic MVT board
ARM: dts: add Protonic PRTI6G board
ARM: dts: add Kverneland UT1, UT1Q and UT1P
ARM: dts: add Kverneland TGO board
Philipp Zabel (1):
ARM: dts: imx6: rdu2: enable WDOG1
Russell King (1):
ARM: dts: imx6-sr-som: increase at8035 PHY gigabit Tw parameter
Shawn Guo (1):
Merge tag 'imx-fixes-5.11-2' into imx/dt
arch/arm/boot/dts/Makefile | 8 +
arch/arm/boot/dts/e60k02.dtsi | 6 +
arch/arm/boot/dts/imx28.dtsi | 10 +
arch/arm/boot/dts/imx6-logicpd-baseboard.dtsi | 1 -
arch/arm/boot/dts/imx6dl-plybas.dts | 394 ++++++++++++
arch/arm/boot/dts/imx6dl-plym2m.dts | 446 ++++++++++++++
arch/arm/boot/dts/imx6dl-prtmvt.dts | 852 ++++++++++++++++++++++++++
arch/arm/boot/dts/imx6dl-victgo.dts | 852 ++++++++++++++++++++++++++
arch/arm/boot/dts/imx6dl-vicut1.dts | 13 +
arch/arm/boot/dts/imx6q-vicut1.dts | 17 +
arch/arm/boot/dts/imx6q.dtsi | 20 +-
arch/arm/boot/dts/imx6qdl-sabreauto.dtsi | 1 +
arch/arm/boot/dts/imx6qdl-sr-som.dtsi | 2 +
arch/arm/boot/dts/imx6qdl-vicut1.dtsi | 803 ++++++++++++++++++++++++
arch/arm/boot/dts/imx6qdl-zii-rdu2.dtsi | 42 +-
arch/arm/boot/dts/imx6qdl.dtsi | 25 +-
arch/arm/boot/dts/imx6qp-vicutp.dts | 13 +
arch/arm/boot/dts/imx6sl-tolino-shine2hd.dts | 18 +-
arch/arm/boot/dts/imx6sl-tolino-shine3.dts | 15 +-
arch/arm/boot/dts/imx6sll-kobo-clarahd.dts | 13 +-
arch/arm/boot/dts/imx6sx-sdb.dtsi | 2 +
arch/arm/boot/dts/imx6ul-14x14-evk.dtsi | 54 +-
arch/arm/boot/dts/imx6ul-prti6g.dts | 356 +++++++++++
arch/arm/boot/dts/imx6ul.dtsi | 2 +
arch/arm/boot/dts/imx7s.dtsi | 1 +
25 files changed, 3917 insertions(+), 49 deletions(-)
create mode 100644 arch/arm/boot/dts/imx6dl-plybas.dts
create mode 100644 arch/arm/boot/dts/imx6dl-plym2m.dts
create mode 100644 arch/arm/boot/dts/imx6dl-prtmvt.dts
create mode 100644 arch/arm/boot/dts/imx6dl-victgo.dts
create mode 100644 arch/arm/boot/dts/imx6dl-vicut1.dts
create mode 100644 arch/arm/boot/dts/imx6q-vicut1.dts
create mode 100644 arch/arm/boot/dts/imx6qdl-vicut1.dtsi
create mode 100644 arch/arm/boot/dts/imx6qp-vicutp.dts
create mode 100644 arch/arm/boot/dts/imx6ul-prti6g.dts
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply [flat|nested] 24+ messages in thread* Re: [GIT PULL 4/6] i.MX device tree change for 5.12
@ 2021-02-09 23:06 ` Arnd Bergmann
0 siblings, 0 replies; 24+ messages in thread
From: Arnd Bergmann @ 2021-02-09 23:06 UTC (permalink / raw)
To: soc, arm, Shawn Guo
Cc: Arnd Bergmann, Stefan Agner, linux-imx, Li Yang, Fabio Estevam,
kernel, linux-arm-kernel
From: Arnd Bergmann <arnd@arndb.de>
On Thu, 4 Feb 2021 20:01:48 +0800, Shawn Guo wrote:
> Tag imx-fixes-5.11-2 is merged into the branch to resolve some
> dependency around imx6-sr-som board support.
>
> Shawn
>
>
> The following changes since commit 82c082784e03a9a9c043345f9bc04bc8254cf6da:
>
> [...]
Merged into arm/dt, thanks!
merge commit: 48a60549d207c0e5691b88cd91305a7c0521cef5
Arnd
^ permalink raw reply [flat|nested] 24+ messages in thread* Re: [GIT PULL 4/6] i.MX device tree change for 5.12
@ 2021-02-09 23:06 ` Arnd Bergmann
0 siblings, 0 replies; 24+ messages in thread
From: Arnd Bergmann @ 2021-02-09 23:06 UTC (permalink / raw)
To: soc, arm, Shawn Guo
Cc: Arnd Bergmann, Stefan Agner, Li Yang, linux-imx, kernel,
Fabio Estevam, linux-arm-kernel
From: Arnd Bergmann <arnd@arndb.de>
On Thu, 4 Feb 2021 20:01:48 +0800, Shawn Guo wrote:
> Tag imx-fixes-5.11-2 is merged into the branch to resolve some
> dependency around imx6-sr-som board support.
>
> Shawn
>
>
> The following changes since commit 82c082784e03a9a9c043345f9bc04bc8254cf6da:
>
> [...]
Merged into arm/dt, thanks!
merge commit: 48a60549d207c0e5691b88cd91305a7c0521cef5
Arnd
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply [flat|nested] 24+ messages in thread
* [GIT PULL 5/6] i.MX arm64 device tree update for 5.12
@ 2021-02-04 12:01 ` Shawn Guo
0 siblings, 0 replies; 24+ messages in thread
From: Shawn Guo @ 2021-02-04 12:01 UTC (permalink / raw)
To: soc, arm
Cc: Shawn Guo, Fabio Estevam, Stefan Agner, Li Yang, kernel,
linux-imx, linux-arm-kernel
The following changes since commit 5c8fe583cce542aa0b84adc939ce85293de36e5e:
Linux 5.11-rc1 (2020-12-27 15:30:22 -0800)
are available in the Git repository at:
git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux.git tags/imx-dt64-5.12
for you to fetch changes up to da1a6b8bec881b67f0e234ed19e8b7e2fb1e7812:
arm64: dts: imx: Add i.mx8mm nitrogen basic dts support (2021-01-30 22:26:17 +0800)
----------------------------------------------------------------
i.MX arm64 device tree update for 5.12:
- New board support: Beacon i.MX8M Nano development kit, i.MX8MM Nitrogen,
Gateworks i.MX 8M Mini Development Kits, phyBOARD-Pollux-i.MX8MP,
Librem5 Evergreen.
- Update imx8mm-beacon to drop unused clock-names reference, and add
more pinctrl states for USDHC1.
- Support soc unique ID read with NVMEM on i.MX8M SoCs.
- A series from Biwen Li to add interrupt line for RTC device on
Layerscape SoCs.
- A couple of patch sets to update imx8mq-librem5 support around
regulators, RTC, charger, display, etc.
- A series from Joakim Zhang to improve i.MX8M FEC device configuration.
- A series from Kuldeep Singh to enable flexcan support for LX2160A and
LS1028A.
- A series from Lucas Stach to update ZII devices around audio, USB, I2C
pin configuration and UCS1002 ALERT.
- A series from Michael Walle to update Layerscape device trees to use
constants in the clockgen phandle, add sl28 variant 1 and enable SATA.
- A few patches from Russell King to improve support for a couple of
LX2160A boards.
- A series from Shengjiu Wang to add more audio support for imx8mn-evk.
- Other small and random updates.
----------------------------------------------------------------
Adam Ford (6):
arm64: dts: imx: Add Beacon i.MX8M Nano development kit
arm64: dts: imx8mm-beacon: Drop unused clock-names reference
arm64: dts: imx8mm-beacon: add more pinctrl states for usdhc1
arm64: dts: imx8mn-beacon-som: Configure RTC aliases
arm64: dts: imx8mn: Add fspi node
arm64: dts: imx8mn-beacon-som: Enable QSPI on SOM
Adrien Grassein (1):
arm64: dts: imx: Add i.mx8mm nitrogen basic dts support
Alice Guo (2):
arm64: dts: imx8m: add SoC ID compatible
arm64: dts: imx8m: add NVMEM provider and consumer to read soc unique ID
Biwen Li (8):
arm64: dts: ls1043a: add DT node for external interrupt lines
arm64: dts: ls1046a: add DT node for external interrupt lines
arm64: dts: ls1088a: add DT node for external interrupt lines
arm64: dts: ls1088ardb: fix interrupt line for RTC node
arm64: dts: ls208xa: add DT node for external interrupt lines
arm64: dts: ls208xa-rdb: add interrupt line for RTC node
arm64: dts: lx2160a: add DT node for external interrupt lines
arm64: dts: lx2160ardb: fix interrupt line for RTC node
Fabio Estevam (1):
arm64: dts: imx8mq: Add eCSPI DMA support
Guido Günther (8):
arm64: dts: imx8mq-librem5-devkit: Tweak pmic regulators
arm64: dts: imx8mq-librem5-devkit: Disable snvs_rtc
arm64: dts: imx8mq-librem5-devkit: Drop custom clock settings
arm64: dts: imx8mq: Add clock parents for mipi dphy
arm64: dts: imx8mq-librem5: Mark charger IRQ as High-Z
arm64: dts: imx8mq-librem5: Don't mark buck3 as always on
arm64: dts: imx8mq-librem5: Add usb-c chip as supplier for the charger
arm64: dts: imx8mq-librem5: Add LCD_1V8 regulator
Hou Zhiqiang (1):
arm64: dts: ls1046ardb: Add interrupt line for RTC node
Joakim Zhang (4):
arm64: dts: imx8m: correct assigned clocks for FEC
arm64: dts: imx8mq: assign clock parents for FEC
arm64: dts: imx8m: add mac address for FEC
arm64: dts: imx8m: add fsl,stop-mode property for FEC
Kuldeep Singh (3):
arm64: dts: lx2160a: Add flexcan support
arm64: dts: ls1028a: Update flexcan properties
arm64: dts: ls1028a: Enable flexcan support for LS1028A-RDB/QDS
Leonard Crestez (1):
arm64: dts: imx8mq: Add NOC node
Lucas Stach (5):
arm64: dts: zii-ultra: add sound support
arm64: dts: zii-ultra: fix i2c pin configuration
arm64: dts: zii-ultra: limit USB ports to USB2 speed
arm64: dts: zii-ultra: only trigger IRQ on falling edge ucs1002 ALERT pin
arm64: dts: zii-rmb3: enable RMI4 reduced reporting
Martin Kepplinger (9):
arm64: dts: imx8mq-librem5: add vin-supply to VDD_1V8
arm64: dts: imx8mq-librem5: add pinctrl for the touchscreen description
arm64: dts: imx8mq-librem5: Move usdhc clocks assignment to board DT
arm64: dts: imx8mq-librem5-r3: workaround i2c1 issue with 1GHz cpu voltage
arm64: dts: imx8mq: Add interconnect provider property
arm64: dts: imx8mq: Add interconnect for lcdif
arm64: dts: imx8mq-librem5: enable the LCD panel
arm64: dts: imx8mq-librem5: set regulators boot-on
arm64: dts: Add Librem5 Evergreen
Michael Walle (10):
arm64: dts: ls1012a: use constants in the clockgen phandle
arm64: dts: ls1028a: use constants in the clockgen phandle
arm64: dts: ls1043a: use constants in the clockgen phandle
arm64: dts: ls1046a: use constants in the clockgen phandle
arm64: dts: ls1088a: use constants in the clockgen phandle
arm64: dts: ls208xa: use constants in the clockgen phandle
arm64: dts: lx2160a: use constants in the clockgen phandle
arm64: dts: freescale: sl28: add variant 1
arm64: dts: freescale: sl28: enable SATA support
arm64: dts: ls1028a: fix FlexSPI clock
Pawel Dembicki (2):
arm64: dts: fsl-ls1012a-rdb: add i2c devices
arm64: dts: fsl-ls1012a-frdm: add spi-uart device
Peng Fan (1):
arm64: dts: imx8mq: use_dt_domains for pci node
Russell King (3):
arm64: dts: lx2160a-clearfog-itx: add power button support
arm64: dts: lx2160a-cex7: delete RTC interrupt
arm64: dts: lx2160a-cex7: increase at8035 PHY gigabit Tw parameter
Shengjiu Wang (3):
arm64: dts: imx8mn: Configure clock rate for audio plls
arm64: dts: imx8mn-evk: Add sound-wm8524 card nodes
arm64: dts: imx8mn-evk: Add sound-spdif card nodes
Teresa Remmet (1):
arm64: dts: freescale: Add support for phyBOARD-Pollux-i.MX8MP
Tim Harvey (1):
arm64: dts: imx8mm: Add Gateworks i.MX 8M Mini Development Kits
Yangbo Lu (1):
arm64: dts: freescale: use fixed index mmcN for NXP layerscape reference boards
arch/arm64/boot/dts/freescale/Makefile | 8 +
arch/arm64/boot/dts/freescale/fsl-ls1012a-frdm.dts | 21 +
arch/arm64/boot/dts/freescale/fsl-ls1012a-qds.dts | 5 +
arch/arm64/boot/dts/freescale/fsl-ls1012a-rdb.dts | 50 +++
arch/arm64/boot/dts/freescale/fsl-ls1012a.dtsi | 60 ++-
.../fsl-ls1028a-kontron-kbox-a-230-ls.dts | 4 +
.../freescale/fsl-ls1028a-kontron-sl28-var1.dts | 62 +++
.../fsl-ls1028a-kontron-sl28-var3-ads2.dts | 5 +-
arch/arm64/boot/dts/freescale/fsl-ls1028a-qds.dts | 8 +
arch/arm64/boot/dts/freescale/fsl-ls1028a-rdb.dts | 16 +
arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi | 182 ++++++--
arch/arm64/boot/dts/freescale/fsl-ls1043a.dtsi | 98 ++--
arch/arm64/boot/dts/freescale/fsl-ls1046a-rdb.dts | 3 +
arch/arm64/boot/dts/freescale/fsl-ls1046a.dtsi | 98 ++--
arch/arm64/boot/dts/freescale/fsl-ls1088a-rdb.dts | 6 +-
arch/arm64/boot/dts/freescale/fsl-ls1088a.dtsi | 122 +++--
arch/arm64/boot/dts/freescale/fsl-ls2080a.dtsi | 17 +-
arch/arm64/boot/dts/freescale/fsl-ls2088a.dtsi | 17 +-
arch/arm64/boot/dts/freescale/fsl-ls208xa-rdb.dtsi | 4 +-
arch/arm64/boot/dts/freescale/fsl-ls208xa.dtsi | 118 ++++-
.../arm64/boot/dts/freescale/fsl-lx2160a-cex7.dtsi | 3 +-
.../dts/freescale/fsl-lx2160a-clearfog-itx.dtsi | 12 +
arch/arm64/boot/dts/freescale/fsl-lx2160a-qds.dts | 10 +
arch/arm64/boot/dts/freescale/fsl-lx2160a-rdb.dts | 24 +-
arch/arm64/boot/dts/freescale/fsl-lx2160a.dtsi | 147 ++++--
arch/arm64/boot/dts/freescale/fsl-lx2162a-qds.dts | 2 +
.../dts/freescale/imx8mm-beacon-baseboard.dtsi | 1 -
.../boot/dts/freescale/imx8mm-beacon-som.dtsi | 4 +-
.../boot/dts/freescale/imx8mm-nitrogen-r2.dts | 393 ++++++++++++++++
.../boot/dts/freescale/imx8mm-venice-gw700x.dtsi | 495 +++++++++++++++++++++
.../boot/dts/freescale/imx8mm-venice-gw71xx-0x.dts | 19 +
.../boot/dts/freescale/imx8mm-venice-gw71xx.dtsi | 186 ++++++++
.../boot/dts/freescale/imx8mm-venice-gw72xx-0x.dts | 20 +
.../boot/dts/freescale/imx8mm-venice-gw72xx.dtsi | 311 +++++++++++++
.../boot/dts/freescale/imx8mm-venice-gw73xx-0x.dts | 19 +
.../boot/dts/freescale/imx8mm-venice-gw73xx.dtsi | 362 +++++++++++++++
arch/arm64/boot/dts/freescale/imx8mm.dtsi | 23 +-
.../dts/freescale/imx8mn-beacon-baseboard.dtsi | 307 +++++++++++++
.../arm64/boot/dts/freescale/imx8mn-beacon-kit.dts | 19 +
.../boot/dts/freescale/imx8mn-beacon-som.dtsi | 466 +++++++++++++++++++
arch/arm64/boot/dts/freescale/imx8mn-evk.dtsi | 75 ++++
arch/arm64/boot/dts/freescale/imx8mn.dtsi | 44 +-
.../dts/freescale/imx8mp-phyboard-pollux-rdk.dts | 161 +++++++
.../boot/dts/freescale/imx8mp-phycore-som.dtsi | 293 ++++++++++++
arch/arm64/boot/dts/freescale/imx8mp.dtsi | 23 +-
.../boot/dts/freescale/imx8mq-librem5-devkit.dts | 20 +-
.../arm64/boot/dts/freescale/imx8mq-librem5-r3.dts | 6 +
.../arm64/boot/dts/freescale/imx8mq-librem5-r4.dts | 35 ++
arch/arm64/boot/dts/freescale/imx8mq-librem5.dtsi | 113 ++++-
.../boot/dts/freescale/imx8mq-zii-ultra-rmb3.dts | 93 ++++
.../boot/dts/freescale/imx8mq-zii-ultra-zest.dts | 30 ++
.../arm64/boot/dts/freescale/imx8mq-zii-ultra.dtsi | 118 ++++-
arch/arm64/boot/dts/freescale/imx8mq.dtsi | 72 ++-
arch/arm64/boot/dts/freescale/qoriq-fman3-0.dtsi | 6 +-
54 files changed, 4542 insertions(+), 274 deletions(-)
create mode 100644 arch/arm64/boot/dts/freescale/fsl-ls1028a-kontron-sl28-var1.dts
create mode 100644 arch/arm64/boot/dts/freescale/imx8mm-nitrogen-r2.dts
create mode 100644 arch/arm64/boot/dts/freescale/imx8mm-venice-gw700x.dtsi
create mode 100644 arch/arm64/boot/dts/freescale/imx8mm-venice-gw71xx-0x.dts
create mode 100644 arch/arm64/boot/dts/freescale/imx8mm-venice-gw71xx.dtsi
create mode 100644 arch/arm64/boot/dts/freescale/imx8mm-venice-gw72xx-0x.dts
create mode 100644 arch/arm64/boot/dts/freescale/imx8mm-venice-gw72xx.dtsi
create mode 100644 arch/arm64/boot/dts/freescale/imx8mm-venice-gw73xx-0x.dts
create mode 100644 arch/arm64/boot/dts/freescale/imx8mm-venice-gw73xx.dtsi
create mode 100644 arch/arm64/boot/dts/freescale/imx8mn-beacon-baseboard.dtsi
create mode 100644 arch/arm64/boot/dts/freescale/imx8mn-beacon-kit.dts
create mode 100644 arch/arm64/boot/dts/freescale/imx8mn-beacon-som.dtsi
create mode 100644 arch/arm64/boot/dts/freescale/imx8mp-phyboard-pollux-rdk.dts
create mode 100644 arch/arm64/boot/dts/freescale/imx8mp-phycore-som.dtsi
create mode 100644 arch/arm64/boot/dts/freescale/imx8mq-librem5-r4.dts
^ permalink raw reply [flat|nested] 24+ messages in thread* [GIT PULL 5/6] i.MX arm64 device tree update for 5.12
@ 2021-02-04 12:01 ` Shawn Guo
0 siblings, 0 replies; 24+ messages in thread
From: Shawn Guo @ 2021-02-04 12:01 UTC (permalink / raw)
To: soc, arm
Cc: Shawn Guo, Stefan Agner, Li Yang, linux-imx, kernel,
Fabio Estevam, linux-arm-kernel
The following changes since commit 5c8fe583cce542aa0b84adc939ce85293de36e5e:
Linux 5.11-rc1 (2020-12-27 15:30:22 -0800)
are available in the Git repository at:
git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux.git tags/imx-dt64-5.12
for you to fetch changes up to da1a6b8bec881b67f0e234ed19e8b7e2fb1e7812:
arm64: dts: imx: Add i.mx8mm nitrogen basic dts support (2021-01-30 22:26:17 +0800)
----------------------------------------------------------------
i.MX arm64 device tree update for 5.12:
- New board support: Beacon i.MX8M Nano development kit, i.MX8MM Nitrogen,
Gateworks i.MX 8M Mini Development Kits, phyBOARD-Pollux-i.MX8MP,
Librem5 Evergreen.
- Update imx8mm-beacon to drop unused clock-names reference, and add
more pinctrl states for USDHC1.
- Support soc unique ID read with NVMEM on i.MX8M SoCs.
- A series from Biwen Li to add interrupt line for RTC device on
Layerscape SoCs.
- A couple of patch sets to update imx8mq-librem5 support around
regulators, RTC, charger, display, etc.
- A series from Joakim Zhang to improve i.MX8M FEC device configuration.
- A series from Kuldeep Singh to enable flexcan support for LX2160A and
LS1028A.
- A series from Lucas Stach to update ZII devices around audio, USB, I2C
pin configuration and UCS1002 ALERT.
- A series from Michael Walle to update Layerscape device trees to use
constants in the clockgen phandle, add sl28 variant 1 and enable SATA.
- A few patches from Russell King to improve support for a couple of
LX2160A boards.
- A series from Shengjiu Wang to add more audio support for imx8mn-evk.
- Other small and random updates.
----------------------------------------------------------------
Adam Ford (6):
arm64: dts: imx: Add Beacon i.MX8M Nano development kit
arm64: dts: imx8mm-beacon: Drop unused clock-names reference
arm64: dts: imx8mm-beacon: add more pinctrl states for usdhc1
arm64: dts: imx8mn-beacon-som: Configure RTC aliases
arm64: dts: imx8mn: Add fspi node
arm64: dts: imx8mn-beacon-som: Enable QSPI on SOM
Adrien Grassein (1):
arm64: dts: imx: Add i.mx8mm nitrogen basic dts support
Alice Guo (2):
arm64: dts: imx8m: add SoC ID compatible
arm64: dts: imx8m: add NVMEM provider and consumer to read soc unique ID
Biwen Li (8):
arm64: dts: ls1043a: add DT node for external interrupt lines
arm64: dts: ls1046a: add DT node for external interrupt lines
arm64: dts: ls1088a: add DT node for external interrupt lines
arm64: dts: ls1088ardb: fix interrupt line for RTC node
arm64: dts: ls208xa: add DT node for external interrupt lines
arm64: dts: ls208xa-rdb: add interrupt line for RTC node
arm64: dts: lx2160a: add DT node for external interrupt lines
arm64: dts: lx2160ardb: fix interrupt line for RTC node
Fabio Estevam (1):
arm64: dts: imx8mq: Add eCSPI DMA support
Guido Günther (8):
arm64: dts: imx8mq-librem5-devkit: Tweak pmic regulators
arm64: dts: imx8mq-librem5-devkit: Disable snvs_rtc
arm64: dts: imx8mq-librem5-devkit: Drop custom clock settings
arm64: dts: imx8mq: Add clock parents for mipi dphy
arm64: dts: imx8mq-librem5: Mark charger IRQ as High-Z
arm64: dts: imx8mq-librem5: Don't mark buck3 as always on
arm64: dts: imx8mq-librem5: Add usb-c chip as supplier for the charger
arm64: dts: imx8mq-librem5: Add LCD_1V8 regulator
Hou Zhiqiang (1):
arm64: dts: ls1046ardb: Add interrupt line for RTC node
Joakim Zhang (4):
arm64: dts: imx8m: correct assigned clocks for FEC
arm64: dts: imx8mq: assign clock parents for FEC
arm64: dts: imx8m: add mac address for FEC
arm64: dts: imx8m: add fsl,stop-mode property for FEC
Kuldeep Singh (3):
arm64: dts: lx2160a: Add flexcan support
arm64: dts: ls1028a: Update flexcan properties
arm64: dts: ls1028a: Enable flexcan support for LS1028A-RDB/QDS
Leonard Crestez (1):
arm64: dts: imx8mq: Add NOC node
Lucas Stach (5):
arm64: dts: zii-ultra: add sound support
arm64: dts: zii-ultra: fix i2c pin configuration
arm64: dts: zii-ultra: limit USB ports to USB2 speed
arm64: dts: zii-ultra: only trigger IRQ on falling edge ucs1002 ALERT pin
arm64: dts: zii-rmb3: enable RMI4 reduced reporting
Martin Kepplinger (9):
arm64: dts: imx8mq-librem5: add vin-supply to VDD_1V8
arm64: dts: imx8mq-librem5: add pinctrl for the touchscreen description
arm64: dts: imx8mq-librem5: Move usdhc clocks assignment to board DT
arm64: dts: imx8mq-librem5-r3: workaround i2c1 issue with 1GHz cpu voltage
arm64: dts: imx8mq: Add interconnect provider property
arm64: dts: imx8mq: Add interconnect for lcdif
arm64: dts: imx8mq-librem5: enable the LCD panel
arm64: dts: imx8mq-librem5: set regulators boot-on
arm64: dts: Add Librem5 Evergreen
Michael Walle (10):
arm64: dts: ls1012a: use constants in the clockgen phandle
arm64: dts: ls1028a: use constants in the clockgen phandle
arm64: dts: ls1043a: use constants in the clockgen phandle
arm64: dts: ls1046a: use constants in the clockgen phandle
arm64: dts: ls1088a: use constants in the clockgen phandle
arm64: dts: ls208xa: use constants in the clockgen phandle
arm64: dts: lx2160a: use constants in the clockgen phandle
arm64: dts: freescale: sl28: add variant 1
arm64: dts: freescale: sl28: enable SATA support
arm64: dts: ls1028a: fix FlexSPI clock
Pawel Dembicki (2):
arm64: dts: fsl-ls1012a-rdb: add i2c devices
arm64: dts: fsl-ls1012a-frdm: add spi-uart device
Peng Fan (1):
arm64: dts: imx8mq: use_dt_domains for pci node
Russell King (3):
arm64: dts: lx2160a-clearfog-itx: add power button support
arm64: dts: lx2160a-cex7: delete RTC interrupt
arm64: dts: lx2160a-cex7: increase at8035 PHY gigabit Tw parameter
Shengjiu Wang (3):
arm64: dts: imx8mn: Configure clock rate for audio plls
arm64: dts: imx8mn-evk: Add sound-wm8524 card nodes
arm64: dts: imx8mn-evk: Add sound-spdif card nodes
Teresa Remmet (1):
arm64: dts: freescale: Add support for phyBOARD-Pollux-i.MX8MP
Tim Harvey (1):
arm64: dts: imx8mm: Add Gateworks i.MX 8M Mini Development Kits
Yangbo Lu (1):
arm64: dts: freescale: use fixed index mmcN for NXP layerscape reference boards
arch/arm64/boot/dts/freescale/Makefile | 8 +
arch/arm64/boot/dts/freescale/fsl-ls1012a-frdm.dts | 21 +
arch/arm64/boot/dts/freescale/fsl-ls1012a-qds.dts | 5 +
arch/arm64/boot/dts/freescale/fsl-ls1012a-rdb.dts | 50 +++
arch/arm64/boot/dts/freescale/fsl-ls1012a.dtsi | 60 ++-
.../fsl-ls1028a-kontron-kbox-a-230-ls.dts | 4 +
.../freescale/fsl-ls1028a-kontron-sl28-var1.dts | 62 +++
.../fsl-ls1028a-kontron-sl28-var3-ads2.dts | 5 +-
arch/arm64/boot/dts/freescale/fsl-ls1028a-qds.dts | 8 +
arch/arm64/boot/dts/freescale/fsl-ls1028a-rdb.dts | 16 +
arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi | 182 ++++++--
arch/arm64/boot/dts/freescale/fsl-ls1043a.dtsi | 98 ++--
arch/arm64/boot/dts/freescale/fsl-ls1046a-rdb.dts | 3 +
arch/arm64/boot/dts/freescale/fsl-ls1046a.dtsi | 98 ++--
arch/arm64/boot/dts/freescale/fsl-ls1088a-rdb.dts | 6 +-
arch/arm64/boot/dts/freescale/fsl-ls1088a.dtsi | 122 +++--
arch/arm64/boot/dts/freescale/fsl-ls2080a.dtsi | 17 +-
arch/arm64/boot/dts/freescale/fsl-ls2088a.dtsi | 17 +-
arch/arm64/boot/dts/freescale/fsl-ls208xa-rdb.dtsi | 4 +-
arch/arm64/boot/dts/freescale/fsl-ls208xa.dtsi | 118 ++++-
.../arm64/boot/dts/freescale/fsl-lx2160a-cex7.dtsi | 3 +-
.../dts/freescale/fsl-lx2160a-clearfog-itx.dtsi | 12 +
arch/arm64/boot/dts/freescale/fsl-lx2160a-qds.dts | 10 +
arch/arm64/boot/dts/freescale/fsl-lx2160a-rdb.dts | 24 +-
arch/arm64/boot/dts/freescale/fsl-lx2160a.dtsi | 147 ++++--
arch/arm64/boot/dts/freescale/fsl-lx2162a-qds.dts | 2 +
.../dts/freescale/imx8mm-beacon-baseboard.dtsi | 1 -
.../boot/dts/freescale/imx8mm-beacon-som.dtsi | 4 +-
.../boot/dts/freescale/imx8mm-nitrogen-r2.dts | 393 ++++++++++++++++
.../boot/dts/freescale/imx8mm-venice-gw700x.dtsi | 495 +++++++++++++++++++++
.../boot/dts/freescale/imx8mm-venice-gw71xx-0x.dts | 19 +
.../boot/dts/freescale/imx8mm-venice-gw71xx.dtsi | 186 ++++++++
.../boot/dts/freescale/imx8mm-venice-gw72xx-0x.dts | 20 +
.../boot/dts/freescale/imx8mm-venice-gw72xx.dtsi | 311 +++++++++++++
.../boot/dts/freescale/imx8mm-venice-gw73xx-0x.dts | 19 +
.../boot/dts/freescale/imx8mm-venice-gw73xx.dtsi | 362 +++++++++++++++
arch/arm64/boot/dts/freescale/imx8mm.dtsi | 23 +-
.../dts/freescale/imx8mn-beacon-baseboard.dtsi | 307 +++++++++++++
.../arm64/boot/dts/freescale/imx8mn-beacon-kit.dts | 19 +
.../boot/dts/freescale/imx8mn-beacon-som.dtsi | 466 +++++++++++++++++++
arch/arm64/boot/dts/freescale/imx8mn-evk.dtsi | 75 ++++
arch/arm64/boot/dts/freescale/imx8mn.dtsi | 44 +-
.../dts/freescale/imx8mp-phyboard-pollux-rdk.dts | 161 +++++++
.../boot/dts/freescale/imx8mp-phycore-som.dtsi | 293 ++++++++++++
arch/arm64/boot/dts/freescale/imx8mp.dtsi | 23 +-
.../boot/dts/freescale/imx8mq-librem5-devkit.dts | 20 +-
.../arm64/boot/dts/freescale/imx8mq-librem5-r3.dts | 6 +
.../arm64/boot/dts/freescale/imx8mq-librem5-r4.dts | 35 ++
arch/arm64/boot/dts/freescale/imx8mq-librem5.dtsi | 113 ++++-
.../boot/dts/freescale/imx8mq-zii-ultra-rmb3.dts | 93 ++++
.../boot/dts/freescale/imx8mq-zii-ultra-zest.dts | 30 ++
.../arm64/boot/dts/freescale/imx8mq-zii-ultra.dtsi | 118 ++++-
arch/arm64/boot/dts/freescale/imx8mq.dtsi | 72 ++-
arch/arm64/boot/dts/freescale/qoriq-fman3-0.dtsi | 6 +-
54 files changed, 4542 insertions(+), 274 deletions(-)
create mode 100644 arch/arm64/boot/dts/freescale/fsl-ls1028a-kontron-sl28-var1.dts
create mode 100644 arch/arm64/boot/dts/freescale/imx8mm-nitrogen-r2.dts
create mode 100644 arch/arm64/boot/dts/freescale/imx8mm-venice-gw700x.dtsi
create mode 100644 arch/arm64/boot/dts/freescale/imx8mm-venice-gw71xx-0x.dts
create mode 100644 arch/arm64/boot/dts/freescale/imx8mm-venice-gw71xx.dtsi
create mode 100644 arch/arm64/boot/dts/freescale/imx8mm-venice-gw72xx-0x.dts
create mode 100644 arch/arm64/boot/dts/freescale/imx8mm-venice-gw72xx.dtsi
create mode 100644 arch/arm64/boot/dts/freescale/imx8mm-venice-gw73xx-0x.dts
create mode 100644 arch/arm64/boot/dts/freescale/imx8mm-venice-gw73xx.dtsi
create mode 100644 arch/arm64/boot/dts/freescale/imx8mn-beacon-baseboard.dtsi
create mode 100644 arch/arm64/boot/dts/freescale/imx8mn-beacon-kit.dts
create mode 100644 arch/arm64/boot/dts/freescale/imx8mn-beacon-som.dtsi
create mode 100644 arch/arm64/boot/dts/freescale/imx8mp-phyboard-pollux-rdk.dts
create mode 100644 arch/arm64/boot/dts/freescale/imx8mp-phycore-som.dtsi
create mode 100644 arch/arm64/boot/dts/freescale/imx8mq-librem5-r4.dts
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply [flat|nested] 24+ messages in thread* Re: [GIT PULL 5/6] i.MX arm64 device tree update for 5.12
@ 2021-02-09 23:06 ` Arnd Bergmann
0 siblings, 0 replies; 24+ messages in thread
From: Arnd Bergmann @ 2021-02-09 23:06 UTC (permalink / raw)
To: soc, arm, Shawn Guo
Cc: Arnd Bergmann, Stefan Agner, linux-imx, Li Yang, Fabio Estevam,
kernel, linux-arm-kernel
From: Arnd Bergmann <arnd@arndb.de>
On Thu, 4 Feb 2021 20:01:49 +0800, Shawn Guo wrote:
> The following changes since commit 5c8fe583cce542aa0b84adc939ce85293de36e5e:
>
> Linux 5.11-rc1 (2020-12-27 15:30:22 -0800)
>
> are available in the Git repository at:
>
> git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux.git tags/imx-dt64-5.12
>
> [...]
Merged into arm/dt, thanks!
I noticed that this came fairly late in the cycle and has a fairly
large amount of changes in it. It would be nice if you could try
to send some of the contents a little earlier in the future to avoid
risking them to miss out.
It could also help to split up the largest branches to make them a
little smaller, e.g. by having one branch just for new SoC and/or
new board support, and another branch for changes to existing machines.
merge commit: 60c9579a01321003fd353c8f8c13012cac2128ba
Arnd
^ permalink raw reply [flat|nested] 24+ messages in thread* Re: [GIT PULL 5/6] i.MX arm64 device tree update for 5.12
@ 2021-02-09 23:06 ` Arnd Bergmann
0 siblings, 0 replies; 24+ messages in thread
From: Arnd Bergmann @ 2021-02-09 23:06 UTC (permalink / raw)
To: soc, arm, Shawn Guo
Cc: Arnd Bergmann, Stefan Agner, Li Yang, linux-imx, kernel,
Fabio Estevam, linux-arm-kernel
From: Arnd Bergmann <arnd@arndb.de>
On Thu, 4 Feb 2021 20:01:49 +0800, Shawn Guo wrote:
> The following changes since commit 5c8fe583cce542aa0b84adc939ce85293de36e5e:
>
> Linux 5.11-rc1 (2020-12-27 15:30:22 -0800)
>
> are available in the Git repository at:
>
> git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux.git tags/imx-dt64-5.12
>
> [...]
Merged into arm/dt, thanks!
I noticed that this came fairly late in the cycle and has a fairly
large amount of changes in it. It would be nice if you could try
to send some of the contents a little earlier in the future to avoid
risking them to miss out.
It could also help to split up the largest branches to make them a
little smaller, e.g. by having one branch just for new SoC and/or
new board support, and another branch for changes to existing machines.
merge commit: 60c9579a01321003fd353c8f8c13012cac2128ba
Arnd
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply [flat|nested] 24+ messages in thread
* [GIT PULL 6/6] i.MX defconfig update for 5.12
@ 2021-02-04 12:01 ` Shawn Guo
0 siblings, 0 replies; 24+ messages in thread
From: Shawn Guo @ 2021-02-04 12:01 UTC (permalink / raw)
To: soc, arm
Cc: Shawn Guo, Fabio Estevam, Stefan Agner, Li Yang, kernel,
linux-imx, linux-arm-kernel
The following changes since commit 5c8fe583cce542aa0b84adc939ce85293de36e5e:
Linux 5.11-rc1 (2020-12-27 15:30:22 -0800)
are available in the Git repository at:
git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux.git tags/imx-defconfig-5.12
for you to fetch changes up to d984d1a0abf87d890250dfa633c0ae3c625de9e9:
arm64: defconfig: Enable PF8x00 as builtin (2021-01-30 22:31:24 +0800)
----------------------------------------------------------------
i.MX defconfig change for 5.12:
- Enable WM8962 support needed by imx8mn-beacon-kit.
- Enable PF8x00 support used by Boundary Nitrogen8M Mini SBC.
- Enable a few drivers for Librem 5 devkit support.
- Enable interconnect support for i.MX8MQ.
- Enable Broadcom BCM54140 PHY driver for Kontron K-Box A-230-LS.
- Enable RV3028 I2C RTC and PCA9532 driver support for phyBOARD-Pollux
i.MX8MP.
- Enable RN5T618 PMIC driver support in imx_v6_v7_defconfig.
----------------------------------------------------------------
Adam Ford (1):
arm64: defconfig: Enable WM8962
Adrien Grassein (1):
arm64: defconfig: Enable PF8x00 as builtin
Andreas Kemnade (1):
ARM: imx_v6_v7_defconfig: enable power driver of RN5T618 PMIC family
Guido Günther (2):
arm64: defconfig: Enable Librem 5 devkit components
arm64: defconfig: Enable vibra-pwm
Martin Kepplinger (1):
arm64: defconfig: Enable interconnect for imx8mq
Michael Walle (1):
arm64: defconfig: Enable Broadcom BCM54140 PHY
Teresa Remmet (2):
arm64: defconfig: Enable rv3028 i2c rtc driver
arm64: defconfig: Enable PCA9532 support
arch/arm/configs/imx_v6_v7_defconfig | 1 +
arch/arm64/configs/defconfig | 18 ++++++++++++++++++
2 files changed, 19 insertions(+)
^ permalink raw reply [flat|nested] 24+ messages in thread* [GIT PULL 6/6] i.MX defconfig update for 5.12
@ 2021-02-04 12:01 ` Shawn Guo
0 siblings, 0 replies; 24+ messages in thread
From: Shawn Guo @ 2021-02-04 12:01 UTC (permalink / raw)
To: soc, arm
Cc: Shawn Guo, Stefan Agner, Li Yang, linux-imx, kernel,
Fabio Estevam, linux-arm-kernel
The following changes since commit 5c8fe583cce542aa0b84adc939ce85293de36e5e:
Linux 5.11-rc1 (2020-12-27 15:30:22 -0800)
are available in the Git repository at:
git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux.git tags/imx-defconfig-5.12
for you to fetch changes up to d984d1a0abf87d890250dfa633c0ae3c625de9e9:
arm64: defconfig: Enable PF8x00 as builtin (2021-01-30 22:31:24 +0800)
----------------------------------------------------------------
i.MX defconfig change for 5.12:
- Enable WM8962 support needed by imx8mn-beacon-kit.
- Enable PF8x00 support used by Boundary Nitrogen8M Mini SBC.
- Enable a few drivers for Librem 5 devkit support.
- Enable interconnect support for i.MX8MQ.
- Enable Broadcom BCM54140 PHY driver for Kontron K-Box A-230-LS.
- Enable RV3028 I2C RTC and PCA9532 driver support for phyBOARD-Pollux
i.MX8MP.
- Enable RN5T618 PMIC driver support in imx_v6_v7_defconfig.
----------------------------------------------------------------
Adam Ford (1):
arm64: defconfig: Enable WM8962
Adrien Grassein (1):
arm64: defconfig: Enable PF8x00 as builtin
Andreas Kemnade (1):
ARM: imx_v6_v7_defconfig: enable power driver of RN5T618 PMIC family
Guido Günther (2):
arm64: defconfig: Enable Librem 5 devkit components
arm64: defconfig: Enable vibra-pwm
Martin Kepplinger (1):
arm64: defconfig: Enable interconnect for imx8mq
Michael Walle (1):
arm64: defconfig: Enable Broadcom BCM54140 PHY
Teresa Remmet (2):
arm64: defconfig: Enable rv3028 i2c rtc driver
arm64: defconfig: Enable PCA9532 support
arch/arm/configs/imx_v6_v7_defconfig | 1 +
arch/arm64/configs/defconfig | 18 ++++++++++++++++++
2 files changed, 19 insertions(+)
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply [flat|nested] 24+ messages in thread* Re: [GIT PULL 6/6] i.MX defconfig update for 5.12
@ 2021-02-09 15:13 ` Arnd Bergmann
0 siblings, 0 replies; 24+ messages in thread
From: Arnd Bergmann @ 2021-02-09 15:13 UTC (permalink / raw)
To: arm, Shawn Guo, soc
Cc: Arnd Bergmann, Stefan Agner, Fabio Estevam, linux-imx, kernel,
linux-arm-kernel, Li Yang
From: Arnd Bergmann <arnd@arndb.de>
On Thu, 4 Feb 2021 20:01:50 +0800, Shawn Guo wrote:
> The following changes since commit 5c8fe583cce542aa0b84adc939ce85293de36e5e:
>
> Linux 5.11-rc1 (2020-12-27 15:30:22 -0800)
>
> are available in the Git repository at:
>
> git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux.git tags/imx-defconfig-5.12
>
> [...]
Merged into arm/defconfig, thanks!
merge commit: 39a944cd8b6463d64ca237ffb0b3b0c9f2057d21
Arnd
^ permalink raw reply [flat|nested] 24+ messages in thread* Re: [GIT PULL 6/6] i.MX defconfig update for 5.12
@ 2021-02-09 15:13 ` Arnd Bergmann
0 siblings, 0 replies; 24+ messages in thread
From: Arnd Bergmann @ 2021-02-09 15:13 UTC (permalink / raw)
To: arm, Shawn Guo, soc
Cc: Arnd Bergmann, Stefan Agner, Li Yang, linux-imx, kernel,
Fabio Estevam, linux-arm-kernel
From: Arnd Bergmann <arnd@arndb.de>
On Thu, 4 Feb 2021 20:01:50 +0800, Shawn Guo wrote:
> The following changes since commit 5c8fe583cce542aa0b84adc939ce85293de36e5e:
>
> Linux 5.11-rc1 (2020-12-27 15:30:22 -0800)
>
> are available in the Git repository at:
>
> git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux.git tags/imx-defconfig-5.12
>
> [...]
Merged into arm/defconfig, thanks!
merge commit: 39a944cd8b6463d64ca237ffb0b3b0c9f2057d21
Arnd
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply [flat|nested] 24+ messages in thread
* Re: [GIT PULL 1/6] i.MX drivers change for 5.12
@ 2021-02-09 23:19 ` Arnd Bergmann
0 siblings, 0 replies; 24+ messages in thread
From: Arnd Bergmann @ 2021-02-09 23:19 UTC (permalink / raw)
To: soc, Shawn Guo, arm
Cc: Arnd Bergmann, Fabio Estevam, linux-imx, Stefan Agner,
linux-arm-kernel, kernel, Li Yang
From: Arnd Bergmann <arnd@arndb.de>
On Thu, 4 Feb 2021 20:01:45 +0800, Shawn Guo wrote:
> The following changes since commit 5c8fe583cce542aa0b84adc939ce85293de36e5e:
>
> Linux 5.11-rc1 (2020-12-27 15:30:22 -0800)
>
> are available in the Git repository at:
>
> git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux.git tags/imx-drivers-5.12
>
> [...]
Merged into arm/drivers, thanks!
merge commit: 168b322e36c5f8903f31d89f34355004920b5e00
Arnd
^ permalink raw reply [flat|nested] 24+ messages in thread* Re: [GIT PULL 1/6] i.MX drivers change for 5.12
@ 2021-02-09 23:19 ` Arnd Bergmann
0 siblings, 0 replies; 24+ messages in thread
From: Arnd Bergmann @ 2021-02-09 23:19 UTC (permalink / raw)
To: soc, Shawn Guo, arm
Cc: Arnd Bergmann, Stefan Agner, Li Yang, linux-imx, kernel,
Fabio Estevam, linux-arm-kernel
From: Arnd Bergmann <arnd@arndb.de>
On Thu, 4 Feb 2021 20:01:45 +0800, Shawn Guo wrote:
> The following changes since commit 5c8fe583cce542aa0b84adc939ce85293de36e5e:
>
> Linux 5.11-rc1 (2020-12-27 15:30:22 -0800)
>
> are available in the Git repository at:
>
> git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux.git tags/imx-drivers-5.12
>
> [...]
Merged into arm/drivers, thanks!
merge commit: 168b322e36c5f8903f31d89f34355004920b5e00
Arnd
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply [flat|nested] 24+ messages in thread