All of lore.kernel.org
 help / color / mirror / Atom feed
From: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
To: Nadeem Athani <nadeem@cadence.com>
Cc: tjoseph@cadence.com, robh@kernel.org, bhelgaas@google.com,
	kishon@ti.com, linux-omap@vger.kernel.org,
	linux-pci@vger.kernel.org, linux-arm-kernel@lists.infradead.org,
	linux-kernel@vger.kernel.org, mparab@cadence.com,
	sjakhade@cadence.com, pthombar@cadence.com
Subject: Re: [PATCH v7 2/2] PCI: cadence: Retrain Link to work around Gen2 training defect.
Date: Mon, 8 Feb 2021 18:31:47 +0000	[thread overview]
Message-ID: <20210208183147.GA12258@e121166-lin.cambridge.arm.com> (raw)
In-Reply-To: <20201230120515.2348-3-nadeem@cadence.com>

On Wed, Dec 30, 2020 at 01:05:15PM +0100, Nadeem Athani wrote:
> Cadence controller will not initiate autonomous speed change if strapped
> as Gen2. The Retrain Link bit is set as quirk to enable this speed change.
> 
> Signed-off-by: Nadeem Athani <nadeem@cadence.com>
> ---
>  drivers/pci/controller/cadence/pci-j721e.c         |  3 ++
>  drivers/pci/controller/cadence/pcie-cadence-host.c | 37 +++++++++++++++++++++-
>  drivers/pci/controller/cadence/pcie-cadence.h      | 11 ++++++-
>  3 files changed, 49 insertions(+), 2 deletions(-)
> 
> diff --git a/drivers/pci/controller/cadence/pci-j721e.c b/drivers/pci/controller/cadence/pci-j721e.c
> index dac1ac8a7615..849f1e416ea5 100644
> --- a/drivers/pci/controller/cadence/pci-j721e.c
> +++ b/drivers/pci/controller/cadence/pci-j721e.c
> @@ -64,6 +64,7 @@ enum j721e_pcie_mode {
>  
>  struct j721e_pcie_data {
>  	enum j721e_pcie_mode	mode;
> +	bool quirk_retrain_flag;
>  };
>  
>  static inline u32 j721e_pcie_user_readl(struct j721e_pcie *pcie, u32 offset)
> @@ -280,6 +281,7 @@ static struct pci_ops cdns_ti_pcie_host_ops = {
>  
>  static const struct j721e_pcie_data j721e_pcie_rc_data = {
>  	.mode = PCI_MODE_RC,
> +	.quirk_retrain_flag = true,
>  };
>  
>  static const struct j721e_pcie_data j721e_pcie_ep_data = {
> @@ -388,6 +390,7 @@ static int j721e_pcie_probe(struct platform_device *pdev)
>  
>  		bridge->ops = &cdns_ti_pcie_host_ops;
>  		rc = pci_host_bridge_priv(bridge);
> +		rc->quirk_retrain_flag = data->quirk_retrain_flag;
>  
>  		cdns_pcie = &rc->pcie;
>  		cdns_pcie->dev = dev;
> diff --git a/drivers/pci/controller/cadence/pcie-cadence-host.c b/drivers/pci/controller/cadence/pcie-cadence-host.c
> index 9f7aa718c8d4..f3496588862d 100644
> --- a/drivers/pci/controller/cadence/pcie-cadence-host.c
> +++ b/drivers/pci/controller/cadence/pcie-cadence-host.c
> @@ -94,6 +94,35 @@ static int cdns_pcie_host_wait_for_link(struct cdns_pcie *pcie)
>  	return -ETIMEDOUT;
>  }
>  
> +static int cdns_pcie_retrain(struct cdns_pcie *pcie)
> +{
> +	u32 lnk_cap_sls, pcie_cap_off = CDNS_PCIE_RP_CAP_OFFSET;
> +	u16 lnk_stat, lnk_ctl;
> +	int ret = 0;
> +
> +	/*
> +	 * Set retrain bit if current speed is 2.5 GB/s,
> +	 * but the PCIe root port support is > 2.5 GB/s.
> +	 */
> +
> +	lnk_cap_sls = cdns_pcie_readl(pcie, (CDNS_PCIE_RP_BASE + pcie_cap_off +
> +					     PCI_EXP_LNKCAP));
> +	if ((lnk_cap_sls & PCI_EXP_LNKCAP_SLS) <= PCI_EXP_LNKCAP_SLS_2_5GB)
> +		return ret;
> +
> +	lnk_stat = cdns_pcie_rp_readw(pcie, pcie_cap_off + PCI_EXP_LNKSTA);
> +	if ((lnk_stat & PCI_EXP_LNKSTA_CLS) == PCI_EXP_LNKSTA_CLS_2_5GB) {
> +		lnk_ctl = cdns_pcie_rp_readw(pcie,
> +					     pcie_cap_off + PCI_EXP_LNKCTL);
> +		lnk_ctl |= PCI_EXP_LNKCTL_RL;
> +		cdns_pcie_rp_writew(pcie, pcie_cap_off + PCI_EXP_LNKCTL,
> +				    lnk_ctl);
> +
> +		ret = cdns_pcie_host_wait_for_link(pcie);
> +	}
> +	return ret;
> +}
> +
>  static int cdns_pcie_host_init_root_port(struct cdns_pcie_rc *rc)
>  {
>  	struct cdns_pcie *pcie = &rc->pcie;
> @@ -457,8 +486,14 @@ int cdns_pcie_host_setup(struct cdns_pcie_rc *rc)
>  	}
>  
>  	ret = cdns_pcie_host_wait_for_link(pcie);
> -	if (ret)
> +	if (ret) {
>  		dev_dbg(dev, "PCIe link never came up\n");
> +	} else {
> +		if (rc->quirk_retrain_flag) {
> +			if (cdns_pcie_retrain(pcie))
> +				dev_dbg(dev, "PCIe link never came up\n");

I'd move this whole if/else in a function cdns_pcie_host_start_link(),
IMO that's cleaner.

static int cdns_pcie_host_start_link(struct cdns_pcie_rc *rc)
{
	struct cdns_pcie *pcie = &rc->pcie;
	int ret;

	ret = cdns_pcie_host_wait_for_link(pcie);
	/*
	 * PLS ADD A COMMENT HERE
	 */
	if (!ret && rc->quirk_retrain_flag)
		ret = cdns_pcie_retrain(pcie);

	return ret;
}

WARNING: multiple messages have this Message-ID (diff)
From: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
To: Nadeem Athani <nadeem@cadence.com>
Cc: robh@kernel.org, mparab@cadence.com, linux-pci@vger.kernel.org,
	pthombar@cadence.com, linux-kernel@vger.kernel.org,
	kishon@ti.com, tjoseph@cadence.com, sjakhade@cadence.com,
	bhelgaas@google.com, linux-omap@vger.kernel.org,
	linux-arm-kernel@lists.infradead.org
Subject: Re: [PATCH v7 2/2] PCI: cadence: Retrain Link to work around Gen2 training defect.
Date: Mon, 8 Feb 2021 18:31:47 +0000	[thread overview]
Message-ID: <20210208183147.GA12258@e121166-lin.cambridge.arm.com> (raw)
In-Reply-To: <20201230120515.2348-3-nadeem@cadence.com>

On Wed, Dec 30, 2020 at 01:05:15PM +0100, Nadeem Athani wrote:
> Cadence controller will not initiate autonomous speed change if strapped
> as Gen2. The Retrain Link bit is set as quirk to enable this speed change.
> 
> Signed-off-by: Nadeem Athani <nadeem@cadence.com>
> ---
>  drivers/pci/controller/cadence/pci-j721e.c         |  3 ++
>  drivers/pci/controller/cadence/pcie-cadence-host.c | 37 +++++++++++++++++++++-
>  drivers/pci/controller/cadence/pcie-cadence.h      | 11 ++++++-
>  3 files changed, 49 insertions(+), 2 deletions(-)
> 
> diff --git a/drivers/pci/controller/cadence/pci-j721e.c b/drivers/pci/controller/cadence/pci-j721e.c
> index dac1ac8a7615..849f1e416ea5 100644
> --- a/drivers/pci/controller/cadence/pci-j721e.c
> +++ b/drivers/pci/controller/cadence/pci-j721e.c
> @@ -64,6 +64,7 @@ enum j721e_pcie_mode {
>  
>  struct j721e_pcie_data {
>  	enum j721e_pcie_mode	mode;
> +	bool quirk_retrain_flag;
>  };
>  
>  static inline u32 j721e_pcie_user_readl(struct j721e_pcie *pcie, u32 offset)
> @@ -280,6 +281,7 @@ static struct pci_ops cdns_ti_pcie_host_ops = {
>  
>  static const struct j721e_pcie_data j721e_pcie_rc_data = {
>  	.mode = PCI_MODE_RC,
> +	.quirk_retrain_flag = true,
>  };
>  
>  static const struct j721e_pcie_data j721e_pcie_ep_data = {
> @@ -388,6 +390,7 @@ static int j721e_pcie_probe(struct platform_device *pdev)
>  
>  		bridge->ops = &cdns_ti_pcie_host_ops;
>  		rc = pci_host_bridge_priv(bridge);
> +		rc->quirk_retrain_flag = data->quirk_retrain_flag;
>  
>  		cdns_pcie = &rc->pcie;
>  		cdns_pcie->dev = dev;
> diff --git a/drivers/pci/controller/cadence/pcie-cadence-host.c b/drivers/pci/controller/cadence/pcie-cadence-host.c
> index 9f7aa718c8d4..f3496588862d 100644
> --- a/drivers/pci/controller/cadence/pcie-cadence-host.c
> +++ b/drivers/pci/controller/cadence/pcie-cadence-host.c
> @@ -94,6 +94,35 @@ static int cdns_pcie_host_wait_for_link(struct cdns_pcie *pcie)
>  	return -ETIMEDOUT;
>  }
>  
> +static int cdns_pcie_retrain(struct cdns_pcie *pcie)
> +{
> +	u32 lnk_cap_sls, pcie_cap_off = CDNS_PCIE_RP_CAP_OFFSET;
> +	u16 lnk_stat, lnk_ctl;
> +	int ret = 0;
> +
> +	/*
> +	 * Set retrain bit if current speed is 2.5 GB/s,
> +	 * but the PCIe root port support is > 2.5 GB/s.
> +	 */
> +
> +	lnk_cap_sls = cdns_pcie_readl(pcie, (CDNS_PCIE_RP_BASE + pcie_cap_off +
> +					     PCI_EXP_LNKCAP));
> +	if ((lnk_cap_sls & PCI_EXP_LNKCAP_SLS) <= PCI_EXP_LNKCAP_SLS_2_5GB)
> +		return ret;
> +
> +	lnk_stat = cdns_pcie_rp_readw(pcie, pcie_cap_off + PCI_EXP_LNKSTA);
> +	if ((lnk_stat & PCI_EXP_LNKSTA_CLS) == PCI_EXP_LNKSTA_CLS_2_5GB) {
> +		lnk_ctl = cdns_pcie_rp_readw(pcie,
> +					     pcie_cap_off + PCI_EXP_LNKCTL);
> +		lnk_ctl |= PCI_EXP_LNKCTL_RL;
> +		cdns_pcie_rp_writew(pcie, pcie_cap_off + PCI_EXP_LNKCTL,
> +				    lnk_ctl);
> +
> +		ret = cdns_pcie_host_wait_for_link(pcie);
> +	}
> +	return ret;
> +}
> +
>  static int cdns_pcie_host_init_root_port(struct cdns_pcie_rc *rc)
>  {
>  	struct cdns_pcie *pcie = &rc->pcie;
> @@ -457,8 +486,14 @@ int cdns_pcie_host_setup(struct cdns_pcie_rc *rc)
>  	}
>  
>  	ret = cdns_pcie_host_wait_for_link(pcie);
> -	if (ret)
> +	if (ret) {
>  		dev_dbg(dev, "PCIe link never came up\n");
> +	} else {
> +		if (rc->quirk_retrain_flag) {
> +			if (cdns_pcie_retrain(pcie))
> +				dev_dbg(dev, "PCIe link never came up\n");

I'd move this whole if/else in a function cdns_pcie_host_start_link(),
IMO that's cleaner.

static int cdns_pcie_host_start_link(struct cdns_pcie_rc *rc)
{
	struct cdns_pcie *pcie = &rc->pcie;
	int ret;

	ret = cdns_pcie_host_wait_for_link(pcie);
	/*
	 * PLS ADD A COMMENT HERE
	 */
	if (!ret && rc->quirk_retrain_flag)
		ret = cdns_pcie_retrain(pcie);

	return ret;
}

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

  reply	other threads:[~2021-02-08 20:08 UTC|newest]

Thread overview: 18+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2020-12-30 12:05 [PATCH v7 0/2] PCI: cadence: Retrain Link to work around Gen2 Nadeem Athani
2020-12-30 12:05 ` Nadeem Athani
2020-12-30 12:05 ` [PATCH v7 1/2] PCI: cadence: Shifting of a function to support new code Nadeem Athani
2020-12-30 12:05   ` Nadeem Athani
2020-12-30 12:05 ` [PATCH v7 2/2] PCI: cadence: Retrain Link to work around Gen2 training defect Nadeem Athani
2020-12-30 12:05   ` Nadeem Athani
2021-02-08 18:31   ` Lorenzo Pieralisi [this message]
2021-02-08 18:31     ` Lorenzo Pieralisi
2021-01-07 19:54 ` [PATCH v7 0/2] PCI: cadence: Retrain Link to work around Gen2 Athani Nadeem Ladkhan
2021-01-07 19:54   ` Athani Nadeem Ladkhan
2021-01-12  7:15 ` Kishon Vijay Abraham I
2021-01-12  7:15   ` Kishon Vijay Abraham I
2021-01-22  5:57   ` Athani Nadeem Ladkhan
2021-01-22  5:57     ` Athani Nadeem Ladkhan
2021-02-08  2:00   ` Kishon Vijay Abraham I
2021-02-08  2:00     ` Kishon Vijay Abraham I
2021-02-02  9:27 ` Tom Joseph
2021-02-02  9:27   ` Tom Joseph

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20210208183147.GA12258@e121166-lin.cambridge.arm.com \
    --to=lorenzo.pieralisi@arm.com \
    --cc=bhelgaas@google.com \
    --cc=kishon@ti.com \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-omap@vger.kernel.org \
    --cc=linux-pci@vger.kernel.org \
    --cc=mparab@cadence.com \
    --cc=nadeem@cadence.com \
    --cc=pthombar@cadence.com \
    --cc=robh@kernel.org \
    --cc=sjakhade@cadence.com \
    --cc=tjoseph@cadence.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.