* [PATCH 1/5] arm64: dts: broadcom: bcm4908: describe USB PHY
@ 2021-02-15 20:41 ` Rafał Miłecki
0 siblings, 0 replies; 14+ messages in thread
From: Rafał Miłecki @ 2021-02-15 20:41 UTC (permalink / raw)
To: Florian Fainelli
Cc: Rafał Miłecki, devicetree, Rob Herring,
bcm-kernel-feedback-list, linux-arm-kernel
From: Rafał Miłecki <rafal@milecki.pl>
BCM4908 uses slightly modified STB family USB PHY. It handles OHCI/EHCI
and XHCI. It requires powering up using the PMB.
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
---
.../bcm4908/bcm4906-netgear-r8000p.dts | 17 +++++++++++++
.../bcm4908/bcm4908-asus-gt-ac5300.dts | 17 +++++++++++++
.../boot/dts/broadcom/bcm4908/bcm4908.dtsi | 25 ++++++++++++++++---
3 files changed, 55 insertions(+), 4 deletions(-)
diff --git a/arch/arm64/boot/dts/broadcom/bcm4908/bcm4906-netgear-r8000p.dts b/arch/arm64/boot/dts/broadcom/bcm4908/bcm4906-netgear-r8000p.dts
index ee3ed612274c..bf0d534ace2e 100644
--- a/arch/arm64/boot/dts/broadcom/bcm4908/bcm4906-netgear-r8000p.dts
+++ b/arch/arm64/boot/dts/broadcom/bcm4908/bcm4906-netgear-r8000p.dts
@@ -26,6 +26,23 @@ wps {
};
};
+&usb_phy {
+ brcm,ioc = <1>;
+ status = "okay";
+};
+
+&ehci {
+ status = "okay";
+};
+
+&ohci {
+ status = "okay";
+};
+
+&xhci {
+ status = "okay";
+};
+
&nandcs {
nand-ecc-strength = <4>;
nand-ecc-step-size = <512>;
diff --git a/arch/arm64/boot/dts/broadcom/bcm4908/bcm4908-asus-gt-ac5300.dts b/arch/arm64/boot/dts/broadcom/bcm4908/bcm4908-asus-gt-ac5300.dts
index 6e4ad66ff536..bb06683d6acf 100644
--- a/arch/arm64/boot/dts/broadcom/bcm4908/bcm4908-asus-gt-ac5300.dts
+++ b/arch/arm64/boot/dts/broadcom/bcm4908/bcm4908-asus-gt-ac5300.dts
@@ -44,6 +44,23 @@ brightness {
};
};
+&usb_phy {
+ brcm,ioc = <1>;
+ status = "okay";
+};
+
+&ehci {
+ status = "okay";
+};
+
+&ohci {
+ status = "okay";
+};
+
+&xhci {
+ status = "okay";
+};
+
&ports {
port@0 {
label = "lan2";
diff --git a/arch/arm64/boot/dts/broadcom/bcm4908/bcm4908.dtsi b/arch/arm64/boot/dts/broadcom/bcm4908/bcm4908.dtsi
index 9354077f74cd..358958105337 100644
--- a/arch/arm64/boot/dts/broadcom/bcm4908/bcm4908.dtsi
+++ b/arch/arm64/boot/dts/broadcom/bcm4908/bcm4908.dtsi
@@ -2,6 +2,8 @@
#include <dt-bindings/interrupt-controller/irq.h>
#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/phy/phy.h>
+#include <dt-bindings/soc/bcm-pmb.h>
/dts-v1/;
@@ -110,24 +112,39 @@ soc {
#size-cells = <1>;
ranges = <0x00 0x00 0x80000000 0x281000>;
- usb@c300 {
+ usb_phy: usb-phy@c200 {
+ compatible = "brcm,bcm4908-usb-phy";
+ reg = <0xc200 0x100>;
+ reg-names = "crtl";
+ power-domains = <&pmb BCM_PMB_HOST_USB>;
+ dr_mode = "host";
+ brcm,has-xhci;
+ brcm,has-eohci;
+ #phy-cells = <1>;
+ status = "disabled";
+ };
+
+ ehci: usb@c300 {
compatible = "generic-ehci";
reg = <0xc300 0x100>;
interrupts = <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>;
+ phys = <&usb_phy PHY_TYPE_USB2>;
status = "disabled";
};
- usb@c400 {
+ ohci: usb@c400 {
compatible = "generic-ohci";
reg = <0xc400 0x100>;
interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>;
+ phys = <&usb_phy PHY_TYPE_USB2>;
status = "disabled";
};
- usb@d000 {
+ xhci: usb@d000 {
compatible = "generic-xhci";
reg = <0xd000 0x8c8>;
interrupts = <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>;
+ phys = <&usb_phy PHY_TYPE_USB3>;
status = "disabled";
};
@@ -222,7 +239,7 @@ procmon: syscon@280000 {
#address-cells = <1>;
#size-cells = <1>;
- power-controller@2800c0 {
+ pmb: power-controller@2800c0 {
compatible = "brcm,bcm4908-pmb";
reg = <0x2800c0 0x40>;
#power-domain-cells = <1>;
--
2.26.2
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply related [flat|nested] 14+ messages in thread* [PATCH 2/5] arm64: dts: broadcom: bcm4908: describe Ethernet controller
2021-02-15 20:41 ` Rafał Miłecki
@ 2021-02-15 20:41 ` Rafał Miłecki
-1 siblings, 0 replies; 14+ messages in thread
From: Rafał Miłecki @ 2021-02-15 20:41 UTC (permalink / raw)
To: Florian Fainelli
Cc: Rob Herring, linux-arm-kernel, devicetree,
bcm-kernel-feedback-list, Rafał Miłecki
From: Rafał Miłecki <rafal@milecki.pl>
BCM4908 SoCs have an integrated Ethernet controller.
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
---
.../boot/dts/broadcom/bcm4908/bcm4908.dtsi | 20 +++++++++++++++++++
1 file changed, 20 insertions(+)
diff --git a/arch/arm64/boot/dts/broadcom/bcm4908/bcm4908.dtsi b/arch/arm64/boot/dts/broadcom/bcm4908/bcm4908.dtsi
index 358958105337..2d2c23292508 100644
--- a/arch/arm64/boot/dts/broadcom/bcm4908/bcm4908.dtsi
+++ b/arch/arm64/boot/dts/broadcom/bcm4908/bcm4908.dtsi
@@ -112,6 +112,14 @@ soc {
#size-cells = <1>;
ranges = <0x00 0x00 0x80000000 0x281000>;
+ enet: ethernet@2000 {
+ compatible = "brcm,bcm4908-enet";
+ reg = <0x2000 0x1000>;
+
+ interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "rx";
+ };
+
usb_phy: usb-phy@c200 {
compatible = "brcm,bcm4908-usb-phy";
reg = <0xc200 0x100>;
@@ -199,6 +207,18 @@ port@3 {
phy-mode = "internal";
phy-handle = <&phy11>;
};
+
+ port@8 {
+ reg = <8>;
+ phy-mode = "internal";
+ ethernet = <&enet>;
+ brcm,use-bcm-hdr;
+
+ fixed-link {
+ speed = <1000>;
+ full-duplex;
+ };
+ };
};
};
--
2.26.2
^ permalink raw reply related [flat|nested] 14+ messages in thread* [PATCH 2/5] arm64: dts: broadcom: bcm4908: describe Ethernet controller
@ 2021-02-15 20:41 ` Rafał Miłecki
0 siblings, 0 replies; 14+ messages in thread
From: Rafał Miłecki @ 2021-02-15 20:41 UTC (permalink / raw)
To: Florian Fainelli
Cc: Rafał Miłecki, devicetree, Rob Herring,
bcm-kernel-feedback-list, linux-arm-kernel
From: Rafał Miłecki <rafal@milecki.pl>
BCM4908 SoCs have an integrated Ethernet controller.
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
---
.../boot/dts/broadcom/bcm4908/bcm4908.dtsi | 20 +++++++++++++++++++
1 file changed, 20 insertions(+)
diff --git a/arch/arm64/boot/dts/broadcom/bcm4908/bcm4908.dtsi b/arch/arm64/boot/dts/broadcom/bcm4908/bcm4908.dtsi
index 358958105337..2d2c23292508 100644
--- a/arch/arm64/boot/dts/broadcom/bcm4908/bcm4908.dtsi
+++ b/arch/arm64/boot/dts/broadcom/bcm4908/bcm4908.dtsi
@@ -112,6 +112,14 @@ soc {
#size-cells = <1>;
ranges = <0x00 0x00 0x80000000 0x281000>;
+ enet: ethernet@2000 {
+ compatible = "brcm,bcm4908-enet";
+ reg = <0x2000 0x1000>;
+
+ interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "rx";
+ };
+
usb_phy: usb-phy@c200 {
compatible = "brcm,bcm4908-usb-phy";
reg = <0xc200 0x100>;
@@ -199,6 +207,18 @@ port@3 {
phy-mode = "internal";
phy-handle = <&phy11>;
};
+
+ port@8 {
+ reg = <8>;
+ phy-mode = "internal";
+ ethernet = <&enet>;
+ brcm,use-bcm-hdr;
+
+ fixed-link {
+ speed = <1000>;
+ full-duplex;
+ };
+ };
};
};
--
2.26.2
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply related [flat|nested] 14+ messages in thread* Re: [PATCH 2/5] arm64: dts: broadcom: bcm4908: describe Ethernet controller
2021-02-15 20:41 ` Rafał Miłecki
@ 2021-02-16 2:50 ` Florian Fainelli
-1 siblings, 0 replies; 14+ messages in thread
From: Florian Fainelli @ 2021-02-16 2:50 UTC (permalink / raw)
To: Rafał Miłecki
Cc: Rob Herring, linux-arm-kernel, devicetree,
bcm-kernel-feedback-list, Rafał Miłecki
On 2/15/2021 12:41 PM, Rafał Miłecki wrote:
> From: Rafał Miłecki <rafal@milecki.pl>
>
> BCM4908 SoCs have an integrated Ethernet controller.
>
> Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
> ---
> .../boot/dts/broadcom/bcm4908/bcm4908.dtsi | 20 +++++++++++++++++++
> 1 file changed, 20 insertions(+)
>
> diff --git a/arch/arm64/boot/dts/broadcom/bcm4908/bcm4908.dtsi b/arch/arm64/boot/dts/broadcom/bcm4908/bcm4908.dtsi
> index 358958105337..2d2c23292508 100644
> --- a/arch/arm64/boot/dts/broadcom/bcm4908/bcm4908.dtsi
> +++ b/arch/arm64/boot/dts/broadcom/bcm4908/bcm4908.dtsi
> @@ -112,6 +112,14 @@ soc {
> #size-cells = <1>;
> ranges = <0x00 0x00 0x80000000 0x281000>;
>
> + enet: ethernet@2000 {
> + compatible = "brcm,bcm4908-enet";
> + reg = <0x2000 0x1000>;
> +
> + interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>;
> + interrupt-names = "rx";
> + };
> +
> usb_phy: usb-phy@c200 {
> compatible = "brcm,bcm4908-usb-phy";
> reg = <0xc200 0x100>;
> @@ -199,6 +207,18 @@ port@3 {
> phy-mode = "internal";
> phy-handle = <&phy11>;
> };
> +
> + port@8 {
> + reg = <8>;
> + phy-mode = "internal";
> + ethernet = <&enet>;
> + brcm,use-bcm-hdr;
This looks redundant, because we have an "ethernet" phandle property
here this will become the CPU port for DSA and so we would enable
Broadcom tags on that port. Did you somehow need that for the switch
driver to work?
--
Florian
^ permalink raw reply [flat|nested] 14+ messages in thread* Re: [PATCH 2/5] arm64: dts: broadcom: bcm4908: describe Ethernet controller
@ 2021-02-16 2:50 ` Florian Fainelli
0 siblings, 0 replies; 14+ messages in thread
From: Florian Fainelli @ 2021-02-16 2:50 UTC (permalink / raw)
To: Rafał Miłecki
Cc: Rafał Miłecki, devicetree, Rob Herring,
bcm-kernel-feedback-list, linux-arm-kernel
On 2/15/2021 12:41 PM, Rafał Miłecki wrote:
> From: Rafał Miłecki <rafal@milecki.pl>
>
> BCM4908 SoCs have an integrated Ethernet controller.
>
> Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
> ---
> .../boot/dts/broadcom/bcm4908/bcm4908.dtsi | 20 +++++++++++++++++++
> 1 file changed, 20 insertions(+)
>
> diff --git a/arch/arm64/boot/dts/broadcom/bcm4908/bcm4908.dtsi b/arch/arm64/boot/dts/broadcom/bcm4908/bcm4908.dtsi
> index 358958105337..2d2c23292508 100644
> --- a/arch/arm64/boot/dts/broadcom/bcm4908/bcm4908.dtsi
> +++ b/arch/arm64/boot/dts/broadcom/bcm4908/bcm4908.dtsi
> @@ -112,6 +112,14 @@ soc {
> #size-cells = <1>;
> ranges = <0x00 0x00 0x80000000 0x281000>;
>
> + enet: ethernet@2000 {
> + compatible = "brcm,bcm4908-enet";
> + reg = <0x2000 0x1000>;
> +
> + interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>;
> + interrupt-names = "rx";
> + };
> +
> usb_phy: usb-phy@c200 {
> compatible = "brcm,bcm4908-usb-phy";
> reg = <0xc200 0x100>;
> @@ -199,6 +207,18 @@ port@3 {
> phy-mode = "internal";
> phy-handle = <&phy11>;
> };
> +
> + port@8 {
> + reg = <8>;
> + phy-mode = "internal";
> + ethernet = <&enet>;
> + brcm,use-bcm-hdr;
This looks redundant, because we have an "ethernet" phandle property
here this will become the CPU port for DSA and so we would enable
Broadcom tags on that port. Did you somehow need that for the switch
driver to work?
--
Florian
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply [flat|nested] 14+ messages in thread* Re: [PATCH 2/5] arm64: dts: broadcom: bcm4908: describe Ethernet controller
2021-02-16 2:50 ` Florian Fainelli
@ 2021-02-17 21:31 ` Rafał Miłecki
-1 siblings, 0 replies; 14+ messages in thread
From: Rafał Miłecki @ 2021-02-17 21:31 UTC (permalink / raw)
To: Florian Fainelli, Rafał Miłecki
Cc: Rob Herring, linux-arm-kernel, devicetree, bcm-kernel-feedback-list
On 16.02.2021 03:50, Florian Fainelli wrote:
> On 2/15/2021 12:41 PM, Rafał Miłecki wrote:
>> From: Rafał Miłecki <rafal@milecki.pl>
>>
>> BCM4908 SoCs have an integrated Ethernet controller.
>>
>> Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
>> ---
>> .../boot/dts/broadcom/bcm4908/bcm4908.dtsi | 20 +++++++++++++++++++
>> 1 file changed, 20 insertions(+)
>>
>> diff --git a/arch/arm64/boot/dts/broadcom/bcm4908/bcm4908.dtsi b/arch/arm64/boot/dts/broadcom/bcm4908/bcm4908.dtsi
>> index 358958105337..2d2c23292508 100644
>> --- a/arch/arm64/boot/dts/broadcom/bcm4908/bcm4908.dtsi
>> +++ b/arch/arm64/boot/dts/broadcom/bcm4908/bcm4908.dtsi
>> @@ -112,6 +112,14 @@ soc {
>> #size-cells = <1>;
>> ranges = <0x00 0x00 0x80000000 0x281000>;
>>
>> + enet: ethernet@2000 {
>> + compatible = "brcm,bcm4908-enet";
>> + reg = <0x2000 0x1000>;
>> +
>> + interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>;
>> + interrupt-names = "rx";
>> + };
>> +
>> usb_phy: usb-phy@c200 {
>> compatible = "brcm,bcm4908-usb-phy";
>> reg = <0xc200 0x100>;
>> @@ -199,6 +207,18 @@ port@3 {
>> phy-mode = "internal";
>> phy-handle = <&phy11>;
>> };
>> +
>> + port@8 {
>> + reg = <8>;
>> + phy-mode = "internal";
>> + ethernet = <&enet>;
>> + brcm,use-bcm-hdr;
>
> This looks redundant, because we have an "ethernet" phandle property
> here this will become the CPU port for DSA and so we would enable
> Broadcom tags on that port. Did you somehow need that for the switch
> driver to work?
I blindly added that property. I verified now that it's not needed.
It seems bcm_sf2_imp_setup() handles setup properly.
^ permalink raw reply [flat|nested] 14+ messages in thread* Re: [PATCH 2/5] arm64: dts: broadcom: bcm4908: describe Ethernet controller
@ 2021-02-17 21:31 ` Rafał Miłecki
0 siblings, 0 replies; 14+ messages in thread
From: Rafał Miłecki @ 2021-02-17 21:31 UTC (permalink / raw)
To: Florian Fainelli, Rafał Miłecki
Cc: devicetree, Rob Herring, bcm-kernel-feedback-list, linux-arm-kernel
On 16.02.2021 03:50, Florian Fainelli wrote:
> On 2/15/2021 12:41 PM, Rafał Miłecki wrote:
>> From: Rafał Miłecki <rafal@milecki.pl>
>>
>> BCM4908 SoCs have an integrated Ethernet controller.
>>
>> Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
>> ---
>> .../boot/dts/broadcom/bcm4908/bcm4908.dtsi | 20 +++++++++++++++++++
>> 1 file changed, 20 insertions(+)
>>
>> diff --git a/arch/arm64/boot/dts/broadcom/bcm4908/bcm4908.dtsi b/arch/arm64/boot/dts/broadcom/bcm4908/bcm4908.dtsi
>> index 358958105337..2d2c23292508 100644
>> --- a/arch/arm64/boot/dts/broadcom/bcm4908/bcm4908.dtsi
>> +++ b/arch/arm64/boot/dts/broadcom/bcm4908/bcm4908.dtsi
>> @@ -112,6 +112,14 @@ soc {
>> #size-cells = <1>;
>> ranges = <0x00 0x00 0x80000000 0x281000>;
>>
>> + enet: ethernet@2000 {
>> + compatible = "brcm,bcm4908-enet";
>> + reg = <0x2000 0x1000>;
>> +
>> + interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>;
>> + interrupt-names = "rx";
>> + };
>> +
>> usb_phy: usb-phy@c200 {
>> compatible = "brcm,bcm4908-usb-phy";
>> reg = <0xc200 0x100>;
>> @@ -199,6 +207,18 @@ port@3 {
>> phy-mode = "internal";
>> phy-handle = <&phy11>;
>> };
>> +
>> + port@8 {
>> + reg = <8>;
>> + phy-mode = "internal";
>> + ethernet = <&enet>;
>> + brcm,use-bcm-hdr;
>
> This looks redundant, because we have an "ethernet" phandle property
> here this will become the CPU port for DSA and so we would enable
> Broadcom tags on that port. Did you somehow need that for the switch
> driver to work?
I blindly added that property. I verified now that it's not needed.
It seems bcm_sf2_imp_setup() handles setup properly.
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply [flat|nested] 14+ messages in thread
* [PATCH 3/5] arm64: dts: broadcom: bcm4908: describe Netgear R8000P switch
2021-02-15 20:41 ` Rafał Miłecki
@ 2021-02-15 20:41 ` Rafał Miłecki
-1 siblings, 0 replies; 14+ messages in thread
From: Rafał Miłecki @ 2021-02-15 20:41 UTC (permalink / raw)
To: Florian Fainelli
Cc: Rob Herring, linux-arm-kernel, devicetree,
bcm-kernel-feedback-list, Rafał Miłecki
From: Rafał Miłecki <rafal@milecki.pl>
R8000P model has 4 LAN ports and 1 WAN port.
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
---
.../bcm4908/bcm4906-netgear-r8000p.dts | 25 +++++++++++++++++++
1 file changed, 25 insertions(+)
diff --git a/arch/arm64/boot/dts/broadcom/bcm4908/bcm4906-netgear-r8000p.dts b/arch/arm64/boot/dts/broadcom/bcm4908/bcm4906-netgear-r8000p.dts
index bf0d534ace2e..af2616e82e83 100644
--- a/arch/arm64/boot/dts/broadcom/bcm4908/bcm4906-netgear-r8000p.dts
+++ b/arch/arm64/boot/dts/broadcom/bcm4908/bcm4906-netgear-r8000p.dts
@@ -43,6 +43,31 @@ &xhci {
status = "okay";
};
+&ports {
+ port@0 {
+ label = "lan4";
+ };
+
+ port@1 {
+ label = "lan3";
+ };
+
+ port@2 {
+ label = "lan2";
+ };
+
+ port@3 {
+ label = "lan1";
+ };
+
+ port@7 {
+ reg = <7>;
+ phy-mode = "internal";
+ phy-handle = <&phy12>;
+ label = "wan";
+ };
+};
+
&nandcs {
nand-ecc-strength = <4>;
nand-ecc-step-size = <512>;
--
2.26.2
^ permalink raw reply related [flat|nested] 14+ messages in thread* [PATCH 3/5] arm64: dts: broadcom: bcm4908: describe Netgear R8000P switch
@ 2021-02-15 20:41 ` Rafał Miłecki
0 siblings, 0 replies; 14+ messages in thread
From: Rafał Miłecki @ 2021-02-15 20:41 UTC (permalink / raw)
To: Florian Fainelli
Cc: Rafał Miłecki, devicetree, Rob Herring,
bcm-kernel-feedback-list, linux-arm-kernel
From: Rafał Miłecki <rafal@milecki.pl>
R8000P model has 4 LAN ports and 1 WAN port.
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
---
.../bcm4908/bcm4906-netgear-r8000p.dts | 25 +++++++++++++++++++
1 file changed, 25 insertions(+)
diff --git a/arch/arm64/boot/dts/broadcom/bcm4908/bcm4906-netgear-r8000p.dts b/arch/arm64/boot/dts/broadcom/bcm4908/bcm4906-netgear-r8000p.dts
index bf0d534ace2e..af2616e82e83 100644
--- a/arch/arm64/boot/dts/broadcom/bcm4908/bcm4906-netgear-r8000p.dts
+++ b/arch/arm64/boot/dts/broadcom/bcm4908/bcm4906-netgear-r8000p.dts
@@ -43,6 +43,31 @@ &xhci {
status = "okay";
};
+&ports {
+ port@0 {
+ label = "lan4";
+ };
+
+ port@1 {
+ label = "lan3";
+ };
+
+ port@2 {
+ label = "lan2";
+ };
+
+ port@3 {
+ label = "lan1";
+ };
+
+ port@7 {
+ reg = <7>;
+ phy-mode = "internal";
+ phy-handle = <&phy12>;
+ label = "wan";
+ };
+};
+
&nandcs {
nand-ecc-strength = <4>;
nand-ecc-step-size = <512>;
--
2.26.2
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply related [flat|nested] 14+ messages in thread
* [PATCH 4/5] arm64: dts: broadcom: bcm4908: add remaining Netgear R8000P LEDs
2021-02-15 20:41 ` Rafał Miłecki
@ 2021-02-15 20:41 ` Rafał Miłecki
-1 siblings, 0 replies; 14+ messages in thread
From: Rafał Miłecki @ 2021-02-15 20:41 UTC (permalink / raw)
To: Florian Fainelli
Cc: Rob Herring, linux-arm-kernel, devicetree,
bcm-kernel-feedback-list, Rafał Miłecki
From: Rafał Miłecki <rafal@milecki.pl>
There are a few more GPIO connected LEDs there didn't get described
initially.
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
---
.../bcm4908/bcm4906-netgear-r8000p.dts | 48 +++++++++++++++++++
1 file changed, 48 insertions(+)
diff --git a/arch/arm64/boot/dts/broadcom/bcm4908/bcm4906-netgear-r8000p.dts b/arch/arm64/boot/dts/broadcom/bcm4908/bcm4906-netgear-r8000p.dts
index af2616e82e83..0d02986c80ab 100644
--- a/arch/arm64/boot/dts/broadcom/bcm4908/bcm4906-netgear-r8000p.dts
+++ b/arch/arm64/boot/dts/broadcom/bcm4908/bcm4906-netgear-r8000p.dts
@@ -18,11 +18,59 @@ memory@0 {
leds {
compatible = "gpio-leds";
+ power-white {
+ function = LED_FUNCTION_POWER;
+ color = <LED_COLOR_ID_WHITE>;
+ gpios = <&gpio0 8 GPIO_ACTIVE_LOW>;
+ };
+
+ power-amber {
+ function = LED_FUNCTION_POWER;
+ color = <LED_COLOR_ID_AMBER>;
+ gpios = <&gpio0 9 GPIO_ACTIVE_LOW>;
+ };
+
wps {
function = LED_FUNCTION_WPS;
color = <LED_COLOR_ID_WHITE>;
gpios = <&gpio0 10 GPIO_ACTIVE_LOW>;
};
+
+ 2ghz {
+ function = "2ghz";
+ color = <LED_COLOR_ID_WHITE>;
+ gpios = <&gpio0 14 GPIO_ACTIVE_LOW>;
+ };
+
+ 5ghz-1 {
+ function = "5ghz-1";
+ color = <LED_COLOR_ID_WHITE>;
+ gpios = <&gpio0 15 GPIO_ACTIVE_LOW>;
+ };
+
+ 5ghz-2 {
+ function = "5ghz-2";
+ color = <LED_COLOR_ID_WHITE>;
+ gpios = <&gpio0 16 GPIO_ACTIVE_LOW>;
+ };
+
+ usb2 {
+ function = "usb2";
+ color = <LED_COLOR_ID_WHITE>;
+ gpios = <&gpio0 17 GPIO_ACTIVE_LOW>;
+ };
+
+ usb3 {
+ function = "usb3";
+ color = <LED_COLOR_ID_WHITE>;
+ gpios = <&gpio0 18 GPIO_ACTIVE_LOW>;
+ };
+
+ wifi {
+ function = "wifi";
+ color = <LED_COLOR_ID_WHITE>;
+ gpios = <&gpio0 56 GPIO_ACTIVE_LOW>;
+ };
};
};
--
2.26.2
^ permalink raw reply related [flat|nested] 14+ messages in thread* [PATCH 4/5] arm64: dts: broadcom: bcm4908: add remaining Netgear R8000P LEDs
@ 2021-02-15 20:41 ` Rafał Miłecki
0 siblings, 0 replies; 14+ messages in thread
From: Rafał Miłecki @ 2021-02-15 20:41 UTC (permalink / raw)
To: Florian Fainelli
Cc: Rafał Miłecki, devicetree, Rob Herring,
bcm-kernel-feedback-list, linux-arm-kernel
From: Rafał Miłecki <rafal@milecki.pl>
There are a few more GPIO connected LEDs there didn't get described
initially.
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
---
.../bcm4908/bcm4906-netgear-r8000p.dts | 48 +++++++++++++++++++
1 file changed, 48 insertions(+)
diff --git a/arch/arm64/boot/dts/broadcom/bcm4908/bcm4906-netgear-r8000p.dts b/arch/arm64/boot/dts/broadcom/bcm4908/bcm4906-netgear-r8000p.dts
index af2616e82e83..0d02986c80ab 100644
--- a/arch/arm64/boot/dts/broadcom/bcm4908/bcm4906-netgear-r8000p.dts
+++ b/arch/arm64/boot/dts/broadcom/bcm4908/bcm4906-netgear-r8000p.dts
@@ -18,11 +18,59 @@ memory@0 {
leds {
compatible = "gpio-leds";
+ power-white {
+ function = LED_FUNCTION_POWER;
+ color = <LED_COLOR_ID_WHITE>;
+ gpios = <&gpio0 8 GPIO_ACTIVE_LOW>;
+ };
+
+ power-amber {
+ function = LED_FUNCTION_POWER;
+ color = <LED_COLOR_ID_AMBER>;
+ gpios = <&gpio0 9 GPIO_ACTIVE_LOW>;
+ };
+
wps {
function = LED_FUNCTION_WPS;
color = <LED_COLOR_ID_WHITE>;
gpios = <&gpio0 10 GPIO_ACTIVE_LOW>;
};
+
+ 2ghz {
+ function = "2ghz";
+ color = <LED_COLOR_ID_WHITE>;
+ gpios = <&gpio0 14 GPIO_ACTIVE_LOW>;
+ };
+
+ 5ghz-1 {
+ function = "5ghz-1";
+ color = <LED_COLOR_ID_WHITE>;
+ gpios = <&gpio0 15 GPIO_ACTIVE_LOW>;
+ };
+
+ 5ghz-2 {
+ function = "5ghz-2";
+ color = <LED_COLOR_ID_WHITE>;
+ gpios = <&gpio0 16 GPIO_ACTIVE_LOW>;
+ };
+
+ usb2 {
+ function = "usb2";
+ color = <LED_COLOR_ID_WHITE>;
+ gpios = <&gpio0 17 GPIO_ACTIVE_LOW>;
+ };
+
+ usb3 {
+ function = "usb3";
+ color = <LED_COLOR_ID_WHITE>;
+ gpios = <&gpio0 18 GPIO_ACTIVE_LOW>;
+ };
+
+ wifi {
+ function = "wifi";
+ color = <LED_COLOR_ID_WHITE>;
+ gpios = <&gpio0 56 GPIO_ACTIVE_LOW>;
+ };
};
};
--
2.26.2
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply related [flat|nested] 14+ messages in thread
* [PATCH 5/5] arm64: dts: broadcom: bcm4908: describe firmware partitions
2021-02-15 20:41 ` Rafał Miłecki
@ 2021-02-15 20:41 ` Rafał Miłecki
-1 siblings, 0 replies; 14+ messages in thread
From: Rafał Miłecki @ 2021-02-15 20:41 UTC (permalink / raw)
To: Florian Fainelli
Cc: Rob Herring, linux-arm-kernel, devicetree,
bcm-kernel-feedback-list, Rafał Miłecki
From: Rafał Miłecki <rafal@milecki.pl>
BCM4908 bootloader supports multiple firmware partitions and has its own
bindings defined for them.
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
---
.../dts/broadcom/bcm4908/bcm4906-netgear-r8000p.dts | 1 +
.../dts/broadcom/bcm4908/bcm4908-asus-gt-ac5300.dts | 12 +++++++++++-
2 files changed, 12 insertions(+), 1 deletion(-)
diff --git a/arch/arm64/boot/dts/broadcom/bcm4908/bcm4906-netgear-r8000p.dts b/arch/arm64/boot/dts/broadcom/bcm4908/bcm4906-netgear-r8000p.dts
index 0d02986c80ab..7b24ad365a3c 100644
--- a/arch/arm64/boot/dts/broadcom/bcm4908/bcm4906-netgear-r8000p.dts
+++ b/arch/arm64/boot/dts/broadcom/bcm4908/bcm4906-netgear-r8000p.dts
@@ -135,6 +135,7 @@ partition@0 {
};
partition@100000 {
+ compatible = "brcm,bcm4908-firmware";
label = "firmware";
reg = <0x100000 0x4400000>;
};
diff --git a/arch/arm64/boot/dts/broadcom/bcm4908/bcm4908-asus-gt-ac5300.dts b/arch/arm64/boot/dts/broadcom/bcm4908/bcm4908-asus-gt-ac5300.dts
index bb06683d6acf..7240a9ee9812 100644
--- a/arch/arm64/boot/dts/broadcom/bcm4908/bcm4908-asus-gt-ac5300.dts
+++ b/arch/arm64/boot/dts/broadcom/bcm4908/bcm4908-asus-gt-ac5300.dts
@@ -122,7 +122,7 @@ &nandcs {
#size-cells = <0>;
partitions {
- compatible = "fixed-partitions";
+ compatible = "brcm,bcm4908-partitions";
#address-cells = <1>;
#size-cells = <1>;
@@ -130,5 +130,15 @@ partition@0 {
label = "cferom";
reg = <0x0 0x100000>;
};
+
+ partition@100000 {
+ compatible = "brcm,bcm4908-firmware";
+ reg = <0x100000 0x5700000>;
+ };
+
+ partition@5800000 {
+ compatible = "brcm,bcm4908-firmware";
+ reg = <0x5800000 0x5700000>;
+ };
};
};
--
2.26.2
^ permalink raw reply related [flat|nested] 14+ messages in thread* [PATCH 5/5] arm64: dts: broadcom: bcm4908: describe firmware partitions
@ 2021-02-15 20:41 ` Rafał Miłecki
0 siblings, 0 replies; 14+ messages in thread
From: Rafał Miłecki @ 2021-02-15 20:41 UTC (permalink / raw)
To: Florian Fainelli
Cc: Rafał Miłecki, devicetree, Rob Herring,
bcm-kernel-feedback-list, linux-arm-kernel
From: Rafał Miłecki <rafal@milecki.pl>
BCM4908 bootloader supports multiple firmware partitions and has its own
bindings defined for them.
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
---
.../dts/broadcom/bcm4908/bcm4906-netgear-r8000p.dts | 1 +
.../dts/broadcom/bcm4908/bcm4908-asus-gt-ac5300.dts | 12 +++++++++++-
2 files changed, 12 insertions(+), 1 deletion(-)
diff --git a/arch/arm64/boot/dts/broadcom/bcm4908/bcm4906-netgear-r8000p.dts b/arch/arm64/boot/dts/broadcom/bcm4908/bcm4906-netgear-r8000p.dts
index 0d02986c80ab..7b24ad365a3c 100644
--- a/arch/arm64/boot/dts/broadcom/bcm4908/bcm4906-netgear-r8000p.dts
+++ b/arch/arm64/boot/dts/broadcom/bcm4908/bcm4906-netgear-r8000p.dts
@@ -135,6 +135,7 @@ partition@0 {
};
partition@100000 {
+ compatible = "brcm,bcm4908-firmware";
label = "firmware";
reg = <0x100000 0x4400000>;
};
diff --git a/arch/arm64/boot/dts/broadcom/bcm4908/bcm4908-asus-gt-ac5300.dts b/arch/arm64/boot/dts/broadcom/bcm4908/bcm4908-asus-gt-ac5300.dts
index bb06683d6acf..7240a9ee9812 100644
--- a/arch/arm64/boot/dts/broadcom/bcm4908/bcm4908-asus-gt-ac5300.dts
+++ b/arch/arm64/boot/dts/broadcom/bcm4908/bcm4908-asus-gt-ac5300.dts
@@ -122,7 +122,7 @@ &nandcs {
#size-cells = <0>;
partitions {
- compatible = "fixed-partitions";
+ compatible = "brcm,bcm4908-partitions";
#address-cells = <1>;
#size-cells = <1>;
@@ -130,5 +130,15 @@ partition@0 {
label = "cferom";
reg = <0x0 0x100000>;
};
+
+ partition@100000 {
+ compatible = "brcm,bcm4908-firmware";
+ reg = <0x100000 0x5700000>;
+ };
+
+ partition@5800000 {
+ compatible = "brcm,bcm4908-firmware";
+ reg = <0x5800000 0x5700000>;
+ };
};
};
--
2.26.2
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply related [flat|nested] 14+ messages in thread