* [PATCH V2 0/5] Add mmc-pwrseq file to use common function [not found] <CGME20210216011616epcas1p2c8d40e2b3b4526d0e739b33ac0b71d6e@epcas1p2.samsung.com> @ 2021-02-16 1:16 ` Jaehoon Chung [not found] ` <CGME20210216011616epcas1p3bd8c1c54ae6cda82288cbeb613e03954@epcas1p3.samsung.com> ` (4 more replies) 0 siblings, 5 replies; 8+ messages in thread From: Jaehoon Chung @ 2021-02-16 1:16 UTC (permalink / raw) To: u-boot Some Socs need to use H/W power-reset before probing eMMC. Its function can be resued with same behavior. Changelog on V2: - Not enable CONFIG_MMC_PWRSEQ by default when CONFIG_PWRSEQ is enabled. - Remove unused variable in each drivers. Jaehoon Chung (5): mmc: pwrseq: add mmc-pwrseq file to provide a generic interface mmc: meson_gx_mmc: use mmc_pwrseq instead of meson_mmc_pwrseq mmc: rockchip_dw_mmc: use mmc_pwrseq instead of rockchip_mmc_pwrseq ARM: mach-meson: select MMC_PWRSEQ config configs: enable CONFIG_MMC_PWRSEQ configuration arch/arm/mach-meson/Kconfig | 1 + configs/chromebit_mickey_defconfig | 1 + configs/chromebook_bob_defconfig | 1 + configs/chromebook_jerry_defconfig | 1 + configs/chromebook_minnie_defconfig | 1 + configs/chromebook_speedy_defconfig | 1 + drivers/mmc/Kconfig | 7 ++++ drivers/mmc/Makefile | 1 + drivers/mmc/meson_gx_mmc.c | 45 ++----------------------- drivers/mmc/mmc-pwrseq.c | 51 +++++++++++++++++++++++++++++ drivers/mmc/rockchip_dw_mmc.c | 42 ++---------------------- include/mmc.h | 14 ++++++++ 12 files changed, 85 insertions(+), 81 deletions(-) create mode 100644 drivers/mmc/mmc-pwrseq.c -- 2.29.0 ^ permalink raw reply [flat|nested] 8+ messages in thread
[parent not found: <CGME20210216011616epcas1p3bd8c1c54ae6cda82288cbeb613e03954@epcas1p3.samsung.com>]
* [PATCH V2 1/5] mmc: pwrseq: add mmc-pwrseq file to provide a generic interface [not found] ` <CGME20210216011616epcas1p3bd8c1c54ae6cda82288cbeb613e03954@epcas1p3.samsung.com> @ 2021-02-16 1:16 ` Jaehoon Chung 0 siblings, 0 replies; 8+ messages in thread From: Jaehoon Chung @ 2021-02-16 1:16 UTC (permalink / raw) To: u-boot Add mmc-pwrseq file to provide a generic interface. Signed-off-by: Jaehoon Chung <jh80.chung@samsung.com> --- Changelog on V2: - Remove "default y" in Kconfig --- drivers/mmc/Kconfig | 7 ++++++ drivers/mmc/Makefile | 1 + drivers/mmc/mmc-pwrseq.c | 51 ++++++++++++++++++++++++++++++++++++++++ include/mmc.h | 14 +++++++++++ 4 files changed, 73 insertions(+) create mode 100644 drivers/mmc/mmc-pwrseq.c diff --git a/drivers/mmc/Kconfig b/drivers/mmc/Kconfig index f8ea92172e44..f8ca52efb6b7 100644 --- a/drivers/mmc/Kconfig +++ b/drivers/mmc/Kconfig @@ -18,6 +18,13 @@ config MMC_WRITE help Enable write access to MMC and SD Cards +config MMC_PWRSEQ + bool "HW reset support for eMMC" + depends on PWRSEQ + help + Ths select Hardware reset support aka pwrseq-emmc for eMMC + devices. + config MMC_BROKEN_CD bool "Poll for broken card detection case" help diff --git a/drivers/mmc/Makefile b/drivers/mmc/Makefile index 1c849cbab2f1..89d6af3db30b 100644 --- a/drivers/mmc/Makefile +++ b/drivers/mmc/Makefile @@ -6,6 +6,7 @@ obj-y += mmc.o obj-$(CONFIG_$(SPL_)DM_MMC) += mmc-uclass.o obj-$(CONFIG_$(SPL_)MMC_WRITE) += mmc_write.o +obj-$(CONFIG_MMC_PWRSEQ) += mmc-pwrseq.o obj-$(CONFIG_MMC_SDHCI_ADMA_HELPERS) += sdhci-adma.o ifndef CONFIG_$(SPL_)BLK diff --git a/drivers/mmc/mmc-pwrseq.c b/drivers/mmc/mmc-pwrseq.c new file mode 100644 index 000000000000..2539f61323d1 --- /dev/null +++ b/drivers/mmc/mmc-pwrseq.c @@ -0,0 +1,51 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * (C) Copyright 2021 SAMSUNG Electronics + * Jaehoon Chung <jh80.chung@samsung.com> + */ + +#include <common.h> +#include <dm.h> +#include <mmc.h> +#include <pwrseq.h> +#include <asm/gpio.h> +#include <linux/delay.h> + +int mmc_pwrseq_get_power(struct udevice *dev, struct mmc_config *cfg) +{ + /* Enable power if needed */ + return uclass_get_device_by_phandle(UCLASS_PWRSEQ, dev, "mmc-pwrseq", + &cfg->pwr_dev); +} + +static int mmc_pwrseq_set_power(struct udevice *dev, bool enable) +{ + struct gpio_desc reset; + int ret; + + ret = gpio_request_by_name(dev, "reset-gpios", 0, &reset, GPIOD_IS_OUT); + if (ret) + return ret; + dm_gpio_set_value(&reset, 1); + udelay(1); + dm_gpio_set_value(&reset, 0); + udelay(200); + + return 0; +} + +static const struct pwrseq_ops mmc_pwrseq_ops = { + .set_power = mmc_pwrseq_set_power, +}; + +static const struct udevice_id mmc_pwrseq_ids[] = { + { .compatible = "mmc-pwrseq-emmc" }, + { } +}; + +U_BOOT_DRIVER(mmc_pwrseq_drv) = { + .name = "mmc_pwrseq_emmc", + .id = UCLASS_PWRSEQ, + .of_match = mmc_pwrseq_ids, + .ops = &mmc_pwrseq_ops, +}; diff --git a/include/mmc.h b/include/mmc.h index 1d377e0281f1..637081415430 100644 --- a/include/mmc.h +++ b/include/mmc.h @@ -591,6 +591,9 @@ struct mmc_config { uint f_max; uint b_max; unsigned char part_type; +#ifdef CONFIG_MMC_PWRSEQ + struct udevice *pwr_dev; +#endif }; struct sd_ssr { @@ -801,6 +804,17 @@ int mmc_deinit(struct mmc *mmc); */ int mmc_of_parse(struct udevice *dev, struct mmc_config *cfg); +#ifdef CONFIG_MMC_PWRSEQ +/** + * mmc_pwrseq_get_power() - get a power device from device tree + * + * @dev: MMC device + * @cfg: MMC configuration + * @return 0 if OK, -ve on error + */ +int mmc_pwrseq_get_power(struct udevice *dev, struct mmc_config *cfg); +#endif + int mmc_read(struct mmc *mmc, u64 src, uchar *dst, int size); /** -- 2.29.0 ^ permalink raw reply related [flat|nested] 8+ messages in thread
[parent not found: <CGME20210216011616epcas1p28bde9beeeec920ccb92c74b61b383aed@epcas1p2.samsung.com>]
* [PATCH V2 2/5] mmc: meson_gx_mmc: use mmc_pwrseq instead of meson_mmc_pwrseq [not found] ` <CGME20210216011616epcas1p28bde9beeeec920ccb92c74b61b383aed@epcas1p2.samsung.com> @ 2021-02-16 1:16 ` Jaehoon Chung 0 siblings, 0 replies; 8+ messages in thread From: Jaehoon Chung @ 2021-02-16 1:16 UTC (permalink / raw) To: u-boot Use mmc_pwrseq instead of meson_mmc_pwrseq. Signed-off-by: Jaehoon Chung <jh80.chung@samsung.com> Acked-by: Neil Armstrong <narmstrong@baylibre.com> --- Changelog on V2: - Add Neil's Acked-tag - Remove unused variable --- drivers/mmc/meson_gx_mmc.c | 45 +++----------------------------------- 1 file changed, 3 insertions(+), 42 deletions(-) diff --git a/drivers/mmc/meson_gx_mmc.c b/drivers/mmc/meson_gx_mmc.c index 8b6dfa3b9603..fcf4f03d1e24 100644 --- a/drivers/mmc/meson_gx_mmc.c +++ b/drivers/mmc/meson_gx_mmc.c @@ -265,10 +265,6 @@ static int meson_mmc_probe(struct udevice *dev) uint32_t val; int ret; -#ifdef CONFIG_PWRSEQ - struct udevice *pwr_dev; -#endif - /* Enable the clocks feeding the MMC controller */ ret = clk_get_bulk(dev, &clocks); if (ret) @@ -292,12 +288,11 @@ static int meson_mmc_probe(struct udevice *dev) mmc_set_clock(mmc, cfg->f_min, MMC_CLK_ENABLE); -#ifdef CONFIG_PWRSEQ +#ifdef CONFIG_MMC_PWRSEQ /* Enable power if needed */ - ret = uclass_get_device_by_phandle(UCLASS_PWRSEQ, dev, "mmc-pwrseq", - &pwr_dev); + ret = mmc_pwrseq_get_power(dev, cfg); if (!ret) { - ret = pwrseq_set_power(pwr_dev, true); + ret = pwrseq_set_power(cfg->pwr_dev, true); if (ret) return ret; } @@ -342,37 +337,3 @@ U_BOOT_DRIVER(meson_mmc) = { .of_to_plat = meson_mmc_of_to_plat, .plat_auto = sizeof(struct meson_mmc_plat), }; - -#ifdef CONFIG_PWRSEQ -static int meson_mmc_pwrseq_set_power(struct udevice *dev, bool enable) -{ - struct gpio_desc reset; - int ret; - - ret = gpio_request_by_name(dev, "reset-gpios", 0, &reset, GPIOD_IS_OUT); - if (ret) - return ret; - dm_gpio_set_value(&reset, 1); - udelay(1); - dm_gpio_set_value(&reset, 0); - udelay(200); - - return 0; -} - -static const struct pwrseq_ops meson_mmc_pwrseq_ops = { - .set_power = meson_mmc_pwrseq_set_power, -}; - -static const struct udevice_id meson_mmc_pwrseq_ids[] = { - { .compatible = "mmc-pwrseq-emmc" }, - { } -}; - -U_BOOT_DRIVER(meson_mmc_pwrseq_drv) = { - .name = "mmc_pwrseq_emmc", - .id = UCLASS_PWRSEQ, - .of_match = meson_mmc_pwrseq_ids, - .ops = &meson_mmc_pwrseq_ops, -}; -#endif -- 2.29.0 ^ permalink raw reply related [flat|nested] 8+ messages in thread
[parent not found: <CGME20210216011616epcas1p2c19ad33dd33933d949bcbc34288fc22a@epcas1p2.samsung.com>]
* [PATCH V2 3/5] mmc: rockchip_dw_mmc: use mmc_pwrseq instead of rockchip_mmc_pwrseq [not found] ` <CGME20210216011616epcas1p2c19ad33dd33933d949bcbc34288fc22a@epcas1p2.samsung.com> @ 2021-02-16 1:16 ` Jaehoon Chung 0 siblings, 0 replies; 8+ messages in thread From: Jaehoon Chung @ 2021-02-16 1:16 UTC (permalink / raw) To: u-boot Use mmc_pwrseq instead of rockchip_mmc_pwrseq. Signed-off-by: Jaehoon Chung <jh80.chung@samsung.com> --- Changelog on V2: - Remove unused variable - Fix build error --- drivers/mmc/rockchip_dw_mmc.c | 42 +++-------------------------------- 1 file changed, 3 insertions(+), 39 deletions(-) diff --git a/drivers/mmc/rockchip_dw_mmc.c b/drivers/mmc/rockchip_dw_mmc.c index 1be3c1741fd4..36a00bb2bf55 100644 --- a/drivers/mmc/rockchip_dw_mmc.c +++ b/drivers/mmc/rockchip_dw_mmc.c @@ -105,7 +105,6 @@ static int rockchip_dwmmc_probe(struct udevice *dev) struct mmc_uclass_priv *upriv = dev_get_uclass_priv(dev); struct rockchip_dwmmc_priv *priv = dev_get_priv(dev); struct dwmci_host *host = &priv->host; - struct udevice *pwr_dev __maybe_unused; int ret; #if CONFIG_IS_ENABLED(OF_PLATDATA) @@ -136,12 +135,11 @@ static int rockchip_dwmmc_probe(struct udevice *dev) host->fifo_mode = priv->fifo_mode; -#ifdef CONFIG_PWRSEQ +#ifdef CONFIG_MMC_PWRSEQ /* Enable power if needed */ - ret = uclass_get_device_by_phandle(UCLASS_PWRSEQ, dev, "mmc-pwrseq", - &pwr_dev); + ret = mmc_pwrseq_get_power(dev, &plat->cfg); if (!ret) { - ret = pwrseq_set_power(pwr_dev, true); + ret = pwrseq_set_power(plat->cfg.pwr_dev, true); if (ret) return ret; } @@ -182,37 +180,3 @@ U_BOOT_DRIVER(rockchip_rk3288_dw_mshc) = { DM_DRIVER_ALIAS(rockchip_rk3288_dw_mshc, rockchip_rk3328_dw_mshc) DM_DRIVER_ALIAS(rockchip_rk3288_dw_mshc, rockchip_rk3368_dw_mshc) - -#ifdef CONFIG_PWRSEQ -static int rockchip_dwmmc_pwrseq_set_power(struct udevice *dev, bool enable) -{ - struct gpio_desc reset; - int ret; - - ret = gpio_request_by_name(dev, "reset-gpios", 0, &reset, GPIOD_IS_OUT); - if (ret) - return ret; - dm_gpio_set_value(&reset, 1); - udelay(1); - dm_gpio_set_value(&reset, 0); - udelay(200); - - return 0; -} - -static const struct pwrseq_ops rockchip_dwmmc_pwrseq_ops = { - .set_power = rockchip_dwmmc_pwrseq_set_power, -}; - -static const struct udevice_id rockchip_dwmmc_pwrseq_ids[] = { - { .compatible = "mmc-pwrseq-emmc" }, - { } -}; - -U_BOOT_DRIVER(rockchip_dwmmc_pwrseq_drv) = { - .name = "mmc_pwrseq_emmc", - .id = UCLASS_PWRSEQ, - .of_match = rockchip_dwmmc_pwrseq_ids, - .ops = &rockchip_dwmmc_pwrseq_ops, -}; -#endif -- 2.29.0 ^ permalink raw reply related [flat|nested] 8+ messages in thread
[parent not found: <CGME20210216011617epcas1p39914bbdb2b853b7effd89cfc126cb6c2@epcas1p3.samsung.com>]
* [PATCH V2 4/5] ARM: mach-meson: select MMC_PWRSEQ config [not found] ` <CGME20210216011617epcas1p39914bbdb2b853b7effd89cfc126cb6c2@epcas1p3.samsung.com> @ 2021-02-16 1:16 ` Jaehoon Chung 2021-02-22 17:40 ` Neil Armstrong 0 siblings, 1 reply; 8+ messages in thread From: Jaehoon Chung @ 2021-02-16 1:16 UTC (permalink / raw) To: u-boot Before time, PWRSEQ is selected since below commit. commit 262d34363373 ("board: amlogic: select PWRSEQ for all amlogic platform") Select MMC_PWRSEQ config because of introducing CONFIG_MMC_PWRSEQ for only eMMC module. Signed-off-by: Jaehoon Chung <jh80.chung@samsung.com> --- arch/arm/mach-meson/Kconfig | 1 + 1 file changed, 1 insertion(+) diff --git a/arch/arm/mach-meson/Kconfig b/arch/arm/mach-meson/Kconfig index 513a33dae204..6cba2c40ddaa 100644 --- a/arch/arm/mach-meson/Kconfig +++ b/arch/arm/mach-meson/Kconfig @@ -9,6 +9,7 @@ config MESON64_COMMON select SYSCON select REGMAP select PWRSEQ + select MMC_PWRSEQ select BOARD_LATE_INIT imply CMD_DM -- 2.29.0 ^ permalink raw reply related [flat|nested] 8+ messages in thread
* [PATCH V2 4/5] ARM: mach-meson: select MMC_PWRSEQ config 2021-02-16 1:16 ` [PATCH V2 4/5] ARM: mach-meson: select MMC_PWRSEQ config Jaehoon Chung @ 2021-02-22 17:40 ` Neil Armstrong 0 siblings, 0 replies; 8+ messages in thread From: Neil Armstrong @ 2021-02-22 17:40 UTC (permalink / raw) To: u-boot On 16/02/2021 02:16, Jaehoon Chung wrote: > Before time, PWRSEQ is selected since below commit. > commit 262d34363373 ("board: amlogic: select PWRSEQ for all amlogic platform") > Select MMC_PWRSEQ config because of introducing CONFIG_MMC_PWRSEQ for > only eMMC module. > > Signed-off-by: Jaehoon Chung <jh80.chung@samsung.com> > --- > arch/arm/mach-meson/Kconfig | 1 + > 1 file changed, 1 insertion(+) > > diff --git a/arch/arm/mach-meson/Kconfig b/arch/arm/mach-meson/Kconfig > index 513a33dae204..6cba2c40ddaa 100644 > --- a/arch/arm/mach-meson/Kconfig > +++ b/arch/arm/mach-meson/Kconfig > @@ -9,6 +9,7 @@ config MESON64_COMMON > select SYSCON > select REGMAP > select PWRSEQ > + select MMC_PWRSEQ > select BOARD_LATE_INIT > imply CMD_DM > > Reviewed-by: Neil Armstrong <narmstrong@baylibre.com> ^ permalink raw reply [flat|nested] 8+ messages in thread
* Re: [PATCH V2 4/5] ARM: mach-meson: select MMC_PWRSEQ config @ 2021-02-22 17:40 ` Neil Armstrong 0 siblings, 0 replies; 8+ messages in thread From: Neil Armstrong @ 2021-02-22 17:40 UTC (permalink / raw) To: Jaehoon Chung, u-boot Cc: u-boot-amlogic, sjg, peng.fan, kever.yang, philipp.tomsich On 16/02/2021 02:16, Jaehoon Chung wrote: > Before time, PWRSEQ is selected since below commit. > commit 262d34363373 ("board: amlogic: select PWRSEQ for all amlogic platform") > Select MMC_PWRSEQ config because of introducing CONFIG_MMC_PWRSEQ for > only eMMC module. > > Signed-off-by: Jaehoon Chung <jh80.chung@samsung.com> > --- > arch/arm/mach-meson/Kconfig | 1 + > 1 file changed, 1 insertion(+) > > diff --git a/arch/arm/mach-meson/Kconfig b/arch/arm/mach-meson/Kconfig > index 513a33dae204..6cba2c40ddaa 100644 > --- a/arch/arm/mach-meson/Kconfig > +++ b/arch/arm/mach-meson/Kconfig > @@ -9,6 +9,7 @@ config MESON64_COMMON > select SYSCON > select REGMAP > select PWRSEQ > + select MMC_PWRSEQ > select BOARD_LATE_INIT > imply CMD_DM > > Reviewed-by: Neil Armstrong <narmstrong@baylibre.com> ^ permalink raw reply [flat|nested] 8+ messages in thread
[parent not found: <CGME20210216011617epcas1p43bc258b7cb9aa4144adb5f1b2cf14f55@epcas1p4.samsung.com>]
* [PATCH V2 5/5] configs: enable CONFIG_MMC_PWRSEQ configuration [not found] ` <CGME20210216011617epcas1p43bc258b7cb9aa4144adb5f1b2cf14f55@epcas1p4.samsung.com> @ 2021-02-16 1:16 ` Jaehoon Chung 0 siblings, 0 replies; 8+ messages in thread From: Jaehoon Chung @ 2021-02-16 1:16 UTC (permalink / raw) To: u-boot Enable CONFIG_MMC_PWRSEQ configuration about boards that is using rockchip_dw_mmc driver. Signed-off-by: Jaehoon Chung <jh80.chung@samsung.com> --- configs/chromebit_mickey_defconfig | 1 + configs/chromebook_bob_defconfig | 1 + configs/chromebook_jerry_defconfig | 1 + configs/chromebook_minnie_defconfig | 1 + configs/chromebook_speedy_defconfig | 1 + 5 files changed, 5 insertions(+) diff --git a/configs/chromebit_mickey_defconfig b/configs/chromebit_mickey_defconfig index ba1215bca699..c09b63b94626 100644 --- a/configs/chromebit_mickey_defconfig +++ b/configs/chromebit_mickey_defconfig @@ -63,6 +63,7 @@ CONFIG_CROS_EC_KEYB=y CONFIG_CROS_EC=y CONFIG_CROS_EC_SPI=y CONFIG_PWRSEQ=y +CONFIG_MMC_PWRSEQ=y # CONFIG_SPL_DM_MMC is not set CONFIG_MMC_DW=y CONFIG_MMC_DW_ROCKCHIP=y diff --git a/configs/chromebook_bob_defconfig b/configs/chromebook_bob_defconfig index 73635f0d13f1..a846b6470fef 100644 --- a/configs/chromebook_bob_defconfig +++ b/configs/chromebook_bob_defconfig @@ -55,6 +55,7 @@ CONFIG_CROS_EC_KEYB=y CONFIG_CROS_EC=y CONFIG_CROS_EC_SPI=y CONFIG_PWRSEQ=y +CONFIG_MMC_PWRSEQ=y CONFIG_MMC_DW=y CONFIG_MMC_DW_ROCKCHIP=y CONFIG_MMC_SDHCI=y diff --git a/configs/chromebook_jerry_defconfig b/configs/chromebook_jerry_defconfig index dada5579526b..692b630174d2 100644 --- a/configs/chromebook_jerry_defconfig +++ b/configs/chromebook_jerry_defconfig @@ -65,6 +65,7 @@ CONFIG_CROS_EC_KEYB=y CONFIG_CROS_EC=y CONFIG_CROS_EC_SPI=y CONFIG_PWRSEQ=y +CONFIG_MMC_PWRSEQ=y # CONFIG_SPL_DM_MMC is not set CONFIG_MMC_DW=y CONFIG_MMC_DW_ROCKCHIP=y diff --git a/configs/chromebook_minnie_defconfig b/configs/chromebook_minnie_defconfig index 985ca9477069..ae55842e3bfd 100644 --- a/configs/chromebook_minnie_defconfig +++ b/configs/chromebook_minnie_defconfig @@ -65,6 +65,7 @@ CONFIG_CROS_EC_KEYB=y CONFIG_CROS_EC=y CONFIG_CROS_EC_SPI=y CONFIG_PWRSEQ=y +CONFIG_MMC_PWRSEQ=y # CONFIG_SPL_DM_MMC is not set CONFIG_MMC_DW=y CONFIG_MMC_DW_ROCKCHIP=y diff --git a/configs/chromebook_speedy_defconfig b/configs/chromebook_speedy_defconfig index e3d4c30739ee..4b460ee6a9e6 100644 --- a/configs/chromebook_speedy_defconfig +++ b/configs/chromebook_speedy_defconfig @@ -64,6 +64,7 @@ CONFIG_CROS_EC_KEYB=y CONFIG_CROS_EC=y CONFIG_CROS_EC_SPI=y CONFIG_PWRSEQ=y +CONFIG_MMC_PWRSEQ=y # CONFIG_SPL_DM_MMC is not set CONFIG_MMC_DW=y CONFIG_MMC_DW_ROCKCHIP=y -- 2.29.0 ^ permalink raw reply related [flat|nested] 8+ messages in thread
end of thread, other threads:[~2021-02-22 17:40 UTC | newest]
Thread overview: 8+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
[not found] <CGME20210216011616epcas1p2c8d40e2b3b4526d0e739b33ac0b71d6e@epcas1p2.samsung.com>
2021-02-16 1:16 ` [PATCH V2 0/5] Add mmc-pwrseq file to use common function Jaehoon Chung
[not found] ` <CGME20210216011616epcas1p3bd8c1c54ae6cda82288cbeb613e03954@epcas1p3.samsung.com>
2021-02-16 1:16 ` [PATCH V2 1/5] mmc: pwrseq: add mmc-pwrseq file to provide a generic interface Jaehoon Chung
[not found] ` <CGME20210216011616epcas1p28bde9beeeec920ccb92c74b61b383aed@epcas1p2.samsung.com>
2021-02-16 1:16 ` [PATCH V2 2/5] mmc: meson_gx_mmc: use mmc_pwrseq instead of meson_mmc_pwrseq Jaehoon Chung
[not found] ` <CGME20210216011616epcas1p2c19ad33dd33933d949bcbc34288fc22a@epcas1p2.samsung.com>
2021-02-16 1:16 ` [PATCH V2 3/5] mmc: rockchip_dw_mmc: use mmc_pwrseq instead of rockchip_mmc_pwrseq Jaehoon Chung
[not found] ` <CGME20210216011617epcas1p39914bbdb2b853b7effd89cfc126cb6c2@epcas1p3.samsung.com>
2021-02-16 1:16 ` [PATCH V2 4/5] ARM: mach-meson: select MMC_PWRSEQ config Jaehoon Chung
2021-02-22 17:40 ` Neil Armstrong
2021-02-22 17:40 ` Neil Armstrong
[not found] ` <CGME20210216011617epcas1p43bc258b7cb9aa4144adb5f1b2cf14f55@epcas1p4.samsung.com>
2021-02-16 1:16 ` [PATCH V2 5/5] configs: enable CONFIG_MMC_PWRSEQ configuration Jaehoon Chung
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.