From: Tong Zhang <ztong0001@gmail.com>
To: Dave Airlie <airlied@redhat.com>,
Thomas Zimmermann <tzimmermann@suse.de>,
David Airlie <airlied@linux.ie>, Daniel Vetter <daniel@ffwll.ch>,
dri-devel@lists.freedesktop.org, linux-kernel@vger.kernel.org
Cc: ztong0001@gmail.com
Subject: [PATCH] drm/ast: fix memory leak when unload the driver
Date: Sun, 21 Feb 2021 21:33:22 -0500 [thread overview]
Message-ID: <20210222023322.984885-1-ztong0001@gmail.com> (raw)
a connector is leaked upon module unload, it seems that we should do
similar to sample driver as suggested in drm_drv.c.
Adding drm_atomic_helper_shutdown() in ast_pci_remove to prevent leaking.
[ 153.822134] WARNING: CPU: 0 PID: 173 at drivers/gpu/drm/drm_mode_config.c:504 drm_mode_config_cle0
[ 153.822698] Modules linked in: ast(-) drm_vram_helper drm_ttm_helper ttm [last unloaded: ttm]
[ 153.823197] CPU: 0 PID: 173 Comm: modprobe Tainted: G W 5.11.0-03615-g55f62bc873474
[ 153.823708] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.13.0-48-gd9c812dda519-4
[ 153.824333] RIP: 0010:drm_mode_config_cleanup+0x418/0x470
[ 153.824637] Code: 0c 00 00 00 00 48 8b 84 24 a8 00 00 00 65 48 33 04 25 28 00 00 00 75 65 48 81 c0
[ 153.825668] RSP: 0018:ffff888103c9fb70 EFLAGS: 00010212
[ 153.825962] RAX: ffff888102b0d100 RBX: ffff888102b0c298 RCX: ffffffff818d8b2b
[ 153.826356] RDX: dffffc0000000000 RSI: 000000007fffffff RDI: ffff888102b0c298
[ 153.826748] RBP: ffff888103c9fba0 R08: 0000000000000001 R09: ffffed1020561857
[ 153.827146] R10: ffff888102b0c2b7 R11: ffffed1020561856 R12: ffff888102b0c000
[ 153.827538] R13: ffff888102b0c2d8 R14: ffff888102b0c2d8 R15: 1ffff11020793f70
[ 153.827935] FS: 00007f24bff456a0(0000) GS:ffff88815b400000(0000) knlGS:0000000000000000
[ 153.828380] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 153.828697] CR2: 0000000001c39018 CR3: 0000000103c90000 CR4: 00000000000006f0
[ 153.829096] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[ 153.829486] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
[ 153.829883] Call Trace:
[ 153.830024] ? drmm_mode_config_init+0x930/0x930
[ 153.830281] ? cpumask_next+0x16/0x20
[ 153.830488] ? mnt_get_count+0x66/0x80
[ 153.830699] ? drm_mode_config_cleanup+0x470/0x470
[ 153.830972] drm_managed_release+0xed/0x1c0
[ 153.831208] drm_dev_release+0x3a/0x50
[ 153.831420] release_nodes+0x39e/0x410
[ 153.831631] ? devres_release+0x40/0x40
[ 153.831852] device_release_driver_internal+0x158/0x270
[ 153.832143] driver_detach+0x76/0xe0
[ 153.832344] bus_remove_driver+0x7e/0x100
[ 153.832568] pci_unregister_driver+0x28/0xf0
[ 153.832821] __x64_sys_delete_module+0x268/0x300
[ 153.833086] ? __ia32_sys_delete_module+0x300/0x300
[ 153.833357] ? call_rcu+0x372/0x4f0
[ 153.833553] ? fpregs_assert_state_consistent+0x4d/0x60
[ 153.833840] ? exit_to_user_mode_prepare+0x2f/0x130
[ 153.834118] do_syscall_64+0x33/0x40
[ 153.834317] entry_SYSCALL_64_after_hwframe+0x44/0xae
[ 153.834597] RIP: 0033:0x7f24bfec7cf7
[ 153.834797] Code: 48 89 57 30 48 8b 04 24 48 89 47 38 e9 1d a0 02 00 48 89 f8 48 89 f7 48 89 d6 41
[ 153.835812] RSP: 002b:00007fff72e6cb58 EFLAGS: 00000202 ORIG_RAX: 00000000000000b0
[ 153.836234] RAX: ffffffffffffffda RBX: 00007f24bff45690 RCX: 00007f24bfec7cf7
[ 153.836623] RDX: 00000000ffffffff RSI: 0000000000000080 RDI: 0000000001c2fb10
[ 153.837018] RBP: 0000000001c2fac0 R08: 2f2f2f2f2f2f2f2f R09: 0000000001c2fac0
[ 153.837408] R10: fefefefefefefeff R11: 0000000000000202 R12: 0000000001c2fac0
[ 153.837798] R13: 0000000001c2f9d0 R14: 0000000000000000 R15: 0000000000000001
[ 153.838194] ---[ end trace b92031513bbe596c ]---
[ 153.838441] [drm:drm_mode_config_cleanup] *ERROR* connector VGA-1 leaked!
Signed-off-by: Tong Zhang <ztong0001@gmail.com>
---
drivers/gpu/drm/ast/ast_drv.c | 2 ++
1 file changed, 2 insertions(+)
diff --git a/drivers/gpu/drm/ast/ast_drv.c b/drivers/gpu/drm/ast/ast_drv.c
index 667b450606ef..b047c0ea43e8 100644
--- a/drivers/gpu/drm/ast/ast_drv.c
+++ b/drivers/gpu/drm/ast/ast_drv.c
@@ -30,6 +30,7 @@
#include <linux/module.h>
#include <linux/pci.h>
+#include <drm/drm_atomic_helper.h>
#include <drm/drm_crtc_helper.h>
#include <drm/drm_drv.h>
#include <drm/drm_fb_helper.h>
@@ -138,6 +139,7 @@ static void ast_pci_remove(struct pci_dev *pdev)
struct drm_device *dev = pci_get_drvdata(pdev);
drm_dev_unregister(dev);
+ drm_atomic_helper_shutdown(dev);
}
static int ast_drm_freeze(struct drm_device *dev)
--
2.25.1
WARNING: multiple messages have this Message-ID (diff)
From: Tong Zhang <ztong0001@gmail.com>
To: Dave Airlie <airlied@redhat.com>,
Thomas Zimmermann <tzimmermann@suse.de>,
David Airlie <airlied@linux.ie>, Daniel Vetter <daniel@ffwll.ch>,
dri-devel@lists.freedesktop.org, linux-kernel@vger.kernel.org
Cc: ztong0001@gmail.com
Subject: [PATCH] drm/ast: fix memory leak when unload the driver
Date: Sun, 21 Feb 2021 21:33:22 -0500 [thread overview]
Message-ID: <20210222023322.984885-1-ztong0001@gmail.com> (raw)
a connector is leaked upon module unload, it seems that we should do
similar to sample driver as suggested in drm_drv.c.
Adding drm_atomic_helper_shutdown() in ast_pci_remove to prevent leaking.
[ 153.822134] WARNING: CPU: 0 PID: 173 at drivers/gpu/drm/drm_mode_config.c:504 drm_mode_config_cle0
[ 153.822698] Modules linked in: ast(-) drm_vram_helper drm_ttm_helper ttm [last unloaded: ttm]
[ 153.823197] CPU: 0 PID: 173 Comm: modprobe Tainted: G W 5.11.0-03615-g55f62bc873474
[ 153.823708] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.13.0-48-gd9c812dda519-4
[ 153.824333] RIP: 0010:drm_mode_config_cleanup+0x418/0x470
[ 153.824637] Code: 0c 00 00 00 00 48 8b 84 24 a8 00 00 00 65 48 33 04 25 28 00 00 00 75 65 48 81 c0
[ 153.825668] RSP: 0018:ffff888103c9fb70 EFLAGS: 00010212
[ 153.825962] RAX: ffff888102b0d100 RBX: ffff888102b0c298 RCX: ffffffff818d8b2b
[ 153.826356] RDX: dffffc0000000000 RSI: 000000007fffffff RDI: ffff888102b0c298
[ 153.826748] RBP: ffff888103c9fba0 R08: 0000000000000001 R09: ffffed1020561857
[ 153.827146] R10: ffff888102b0c2b7 R11: ffffed1020561856 R12: ffff888102b0c000
[ 153.827538] R13: ffff888102b0c2d8 R14: ffff888102b0c2d8 R15: 1ffff11020793f70
[ 153.827935] FS: 00007f24bff456a0(0000) GS:ffff88815b400000(0000) knlGS:0000000000000000
[ 153.828380] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 153.828697] CR2: 0000000001c39018 CR3: 0000000103c90000 CR4: 00000000000006f0
[ 153.829096] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[ 153.829486] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
[ 153.829883] Call Trace:
[ 153.830024] ? drmm_mode_config_init+0x930/0x930
[ 153.830281] ? cpumask_next+0x16/0x20
[ 153.830488] ? mnt_get_count+0x66/0x80
[ 153.830699] ? drm_mode_config_cleanup+0x470/0x470
[ 153.830972] drm_managed_release+0xed/0x1c0
[ 153.831208] drm_dev_release+0x3a/0x50
[ 153.831420] release_nodes+0x39e/0x410
[ 153.831631] ? devres_release+0x40/0x40
[ 153.831852] device_release_driver_internal+0x158/0x270
[ 153.832143] driver_detach+0x76/0xe0
[ 153.832344] bus_remove_driver+0x7e/0x100
[ 153.832568] pci_unregister_driver+0x28/0xf0
[ 153.832821] __x64_sys_delete_module+0x268/0x300
[ 153.833086] ? __ia32_sys_delete_module+0x300/0x300
[ 153.833357] ? call_rcu+0x372/0x4f0
[ 153.833553] ? fpregs_assert_state_consistent+0x4d/0x60
[ 153.833840] ? exit_to_user_mode_prepare+0x2f/0x130
[ 153.834118] do_syscall_64+0x33/0x40
[ 153.834317] entry_SYSCALL_64_after_hwframe+0x44/0xae
[ 153.834597] RIP: 0033:0x7f24bfec7cf7
[ 153.834797] Code: 48 89 57 30 48 8b 04 24 48 89 47 38 e9 1d a0 02 00 48 89 f8 48 89 f7 48 89 d6 41
[ 153.835812] RSP: 002b:00007fff72e6cb58 EFLAGS: 00000202 ORIG_RAX: 00000000000000b0
[ 153.836234] RAX: ffffffffffffffda RBX: 00007f24bff45690 RCX: 00007f24bfec7cf7
[ 153.836623] RDX: 00000000ffffffff RSI: 0000000000000080 RDI: 0000000001c2fb10
[ 153.837018] RBP: 0000000001c2fac0 R08: 2f2f2f2f2f2f2f2f R09: 0000000001c2fac0
[ 153.837408] R10: fefefefefefefeff R11: 0000000000000202 R12: 0000000001c2fac0
[ 153.837798] R13: 0000000001c2f9d0 R14: 0000000000000000 R15: 0000000000000001
[ 153.838194] ---[ end trace b92031513bbe596c ]---
[ 153.838441] [drm:drm_mode_config_cleanup] *ERROR* connector VGA-1 leaked!
Signed-off-by: Tong Zhang <ztong0001@gmail.com>
---
drivers/gpu/drm/ast/ast_drv.c | 2 ++
1 file changed, 2 insertions(+)
diff --git a/drivers/gpu/drm/ast/ast_drv.c b/drivers/gpu/drm/ast/ast_drv.c
index 667b450606ef..b047c0ea43e8 100644
--- a/drivers/gpu/drm/ast/ast_drv.c
+++ b/drivers/gpu/drm/ast/ast_drv.c
@@ -30,6 +30,7 @@
#include <linux/module.h>
#include <linux/pci.h>
+#include <drm/drm_atomic_helper.h>
#include <drm/drm_crtc_helper.h>
#include <drm/drm_drv.h>
#include <drm/drm_fb_helper.h>
@@ -138,6 +139,7 @@ static void ast_pci_remove(struct pci_dev *pdev)
struct drm_device *dev = pci_get_drvdata(pdev);
drm_dev_unregister(dev);
+ drm_atomic_helper_shutdown(dev);
}
static int ast_drm_freeze(struct drm_device *dev)
--
2.25.1
_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel
next reply other threads:[~2021-02-22 2:34 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-02-22 2:33 Tong Zhang [this message]
2021-02-22 2:33 ` [PATCH] drm/ast: fix memory leak when unload the driver Tong Zhang
2021-02-22 9:39 ` Thomas Zimmermann
2021-02-22 9:39 ` Thomas Zimmermann
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20210222023322.984885-1-ztong0001@gmail.com \
--to=ztong0001@gmail.com \
--cc=airlied@linux.ie \
--cc=airlied@redhat.com \
--cc=daniel@ffwll.ch \
--cc=dri-devel@lists.freedesktop.org \
--cc=linux-kernel@vger.kernel.org \
--cc=tzimmermann@suse.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.